summaryrefslogtreecommitdiffstats
path: root/urunlevel/include/usage.h
diff options
context:
space:
mode:
Diffstat (limited to 'urunlevel/include/usage.h')
-rw-r--r--urunlevel/include/usage.h3077
1 files changed, 3077 insertions, 0 deletions
diff --git a/urunlevel/include/usage.h b/urunlevel/include/usage.h
new file mode 100644
index 0000000..c18bb20
--- /dev/null
+++ b/urunlevel/include/usage.h
@@ -0,0 +1,3077 @@
1#ifndef __BB_USAGE_H__
2#define __BB_USAGE_H__
3
4#define addgroup_trivial_usage \
5 "[-g GID] group_name [user_name]"
6#define addgroup_full_usage \
7 "Adds a group to the system\n\n" \
8 "Options:\n" \
9 "\t-g GID\t\tspecify gid"
10
11#define adduser_trivial_usage \
12 "[OPTIONS] user_name"
13#define adduser_full_usage \
14 "Adds a user to the system\n\n" \
15 "Options:\n" \
16 "\t-h DIR\t\tAssign home directory DIR\n" \
17 "\t-g GECOS\tAssign gecos field GECOS\n" \
18 "\t-s SHELL\tAssign login shell SHELL\n" \
19 "\t-G\t\tAdd the user to existing group GROUP\n" \
20 "\t-S\t\tcreate a system user (ignored)\n" \
21 "\t-D\t\tDo not assign a password (logins still possible via ssh)\n" \
22 "\t-H\t\tDo not create the home directory"
23
24#define adjtimex_trivial_usage \
25 "[-q] [-o offset] [-f frequency] [-p timeconstant] [-t tick]"
26#define adjtimex_full_usage \
27 "Reads and optionally sets system timebase parameters.\n" \
28 "See adjtimex(2).\n\n" \
29 "Options:\n" \
30 "\t-q\t\tquiet mode - do not print\n" \
31 "\t-o offset\ttime offset, microseconds\n" \
32 "\t-f frequency\tfrequency adjust, integer kernel units (65536 is 1ppm)\n" \
33 "\t\t\t(positive values make the system clock run fast)\n" \
34 "\t-t tick\t\tmicroseconds per tick, usually 10000\n" \
35 "\t-p timeconstant"
36
37#define ar_trivial_usage \
38 "[-o] [-v] [-p] [-t] [-x] ARCHIVE FILES"
39#define ar_full_usage \
40 "Extract or list FILES from an ar archive.\n\n" \
41 "Options:\n" \
42 "\t-o\t\tpreserve original dates\n" \
43 "\t-p\t\textract to stdout\n" \
44 "\t-t\t\tlist\n" \
45 "\t-x\t\textract\n" \
46 "\t-v\t\tverbosely list files processed"
47
48#define arping_trivial_usage \
49 "[-fqbDUA] [-c count] [-w timeout] [-I device] [-s sender] target\n"
50#define arping_full_usage \
51 "Ping hosts by ARP requests/replies.\n\n" \
52 "Options:\n" \
53 "\t-f\t\tQuit on first ARP reply\n" \
54 "\t-q\t\tBe quiet\n" \
55 "\t-b\t\tKeep broadcasting, don't go unicast\n" \
56 "\t-D\t\tDuplicated address detection mode\n" \
57 "\t-U\t\tUnsolicited ARP mode, update your neighbours\n" \
58 "\t-A\t\tARP answer mode, update your neighbours\n" \
59 "\t-c count\tStop after sending count ARP request packets\n" \
60 "\t-w timeout\tTime to wait for ARP reply, in seconds\n" \
61 "\t-I device\tOutgoing interface name, default is eth0\n" \
62 "\t-s sender\tSet specific sender IP address\n" \
63 "\ttarget\t\tTarget IP address of ARP request"
64
65#define ash_trivial_usage \
66 "[FILE]...\n" \
67 "or: ash -c command [args]...\n"
68#define ash_full_usage \
69 "The ash shell (command interpreter)"
70
71#define awk_trivial_usage \
72 "[OPTION]... [program-text] [FILE ...]"
73#define awk_full_usage \
74 "Options:\n" \
75 "\t-v var=val\t\tassign value 'val' to variable 'var'\n" \
76 "\t-F sep\t\tuse 'sep' as field separator\n" \
77 "\t-f progname\t\tread program source from file 'progname'"
78
79#define basename_trivial_usage \
80 "FILE [SUFFIX]"
81#define basename_full_usage \
82 "Strips directory path and suffixes from FILE.\n" \
83 "If specified, also removes any trailing SUFFIX."
84#define basename_example_usage \
85 "$ basename /usr/local/bin/foo\n" \
86 "foo\n" \
87 "$ basename /usr/local/bin/\n" \
88 "bin\n" \
89 "$ basename /foo/bar.txt .txt\n" \
90 "bar"
91
92
93#define boot_named_trivial_usage \
94 ""
95#define boot_named_full_usage \
96 "LSB boot_named init system."
97#define boot_named_example_usage \
98 "$ boot_named start\n"
99
100
101#define boot_portmap_trivial_usage \
102 ""
103#define boot_portmap_full_usage \
104 "LSB boot_portmap init system."
105#define boot_portmap_example_usage \
106 "$ boot_portmap start\n"
107
108
109#define boot_syslog_trivial_usage \
110 ""
111#define boot_syslog_full_usage \
112 "LSB boot_syslog init system."
113#define boot_syslog_example_usage \
114 "$ boot_syslog start\n"
115
116
117#define boot_time_trivial_usage \
118 ""
119#define boot_time_full_usage \
120 "LSB boot_time init system."
121#define boot_time_example_usage \
122 "$ boot_time start\n"
123
124
125#define bunzip2_trivial_usage \
126 "[OPTION]... [FILE]"
127#define bunzip2_full_usage \
128 "Uncompress FILE (or standard input if FILE is '-' or omitted).\n\n" \
129 "Options:\n" \
130 "\t-c\tWrite output to standard output\n" \
131 "\t-f\tForce"
132
133#define bzcat_trivial_usage \
134 "FILE"
135#define bzcat_full_usage \
136 "Uncompress to stdout."
137
138#define cal_trivial_usage \
139 "[-jy] [[month] year]"
140#define cal_full_usage \
141 "Display a calendar.\n" \
142 "\nOptions:\n" \
143 "\t-j\tUse julian dates.\n" \
144 "\t-y\tDisplay the entire year."
145
146#define cat_trivial_usage \
147 "[-u] [FILE]..."
148#define cat_full_usage \
149 "Concatenates FILE(s) and prints them to stdout.\n\n" \
150 "Options:\n" \
151 "\t-u\tignored since unbuffered i/o is always used"
152#define cat_example_usage \
153 "$ cat /proc/uptime\n" \
154 "110716.72 17.67"
155
156#define chgrp_trivial_usage \
157 "[OPTION]... GROUP FILE..."
158#define chgrp_full_usage \
159 "Change the group membership of each FILE to GROUP.\n" \
160 "\nOptions:\n" \
161 "\t-R\tChanges files and directories recursively."
162#define chgrp_example_usage \
163 "$ ls -l /tmp/foo\n" \
164 "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \
165 "$ chgrp root /tmp/foo\n" \
166 "$ ls -l /tmp/foo\n" \
167 "-r--r--r-- 1 andersen root 0 Apr 12 18:25 /tmp/foo\n"
168
169#define chmod_trivial_usage \
170 "[-R] MODE[,MODE]... FILE..."
171#define chmod_full_usage \
172 "Each MODE is one or more of the letters ugoa, one of the\n" \
173 "symbols +-= and one or more of the letters rwxst.\n\n" \
174 "Options:\n" \
175 "\t-R\tChanges files and directories recursively."
176#define chmod_example_usage \
177 "$ ls -l /tmp/foo\n" \
178 "-rw-rw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" \
179 "$ chmod u+x /tmp/foo\n" \
180 "$ ls -l /tmp/foo\n" \
181 "-rwxrw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo*\n" \
182 "$ chmod 444 /tmp/foo\n" \
183 "$ ls -l /tmp/foo\n" \
184 "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n"
185
186#define chown_trivial_usage \
187 "[ -Rh ]... OWNER[<.|:>[GROUP]] FILE..."
188#define chown_full_usage \
189 "Change the owner and/or group of each FILE to OWNER and/or GROUP.\n" \
190 "\nOptions:\n" \
191 "\t-R\tChanges files and directories recursively.\n" \
192 "\t-h\tDo not dereference symbolic links."
193#define chown_example_usage \
194 "$ ls -l /tmp/foo\n" \
195 "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \
196 "$ chown root /tmp/foo\n" \
197 "$ ls -l /tmp/foo\n" \
198 "-r--r--r-- 1 root andersen 0 Apr 12 18:25 /tmp/foo\n" \
199 "$ chown root.root /tmp/foo\n" \
200 "ls -l /tmp/foo\n" \
201 "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n"
202
203#define chroot_trivial_usage \
204 "NEWROOT [COMMAND...]"
205#define chroot_full_usage \
206 "Run COMMAND with root directory set to NEWROOT."
207#define chroot_example_usage \
208 "$ ls -l /bin/ls\n" \
209 "lrwxrwxrwx 1 root root 12 Apr 13 00:46 /bin/ls -> /BusyBox\n" \
210 "# mount /dev/hdc1 /mnt -t minix\n" \
211 "# chroot /mnt\n" \
212 "# ls -l /bin/ls\n" \
213 "-rwxr-xr-x 1 root root 40816 Feb 5 07:45 /bin/ls*\n"
214
215#define chvt_trivial_usage \
216 "N"
217#define chvt_full_usage \
218 "Changes the foreground virtual terminal to /dev/ttyN"
219
220#define clear_trivial_usage \
221 ""
222#define clear_full_usage \
223 "Clear screen."
224
225#define cmp_trivial_usage \
226 "[-l] [-s] FILE1 [FILE2]"
227#define cmp_full_usage \
228 "Compare files. Compares FILE1 vs stdin if FILE2 is not specified.\n\n" \
229 "Options:\n" \
230 "\t-l\tWrite the byte numbers (decimal) and values (octal)\n" \
231 "\t\t for all differing bytes.\n" \
232 "\t-s\tquiet mode - do not print"
233
234#define cp_trivial_usage \
235 "[OPTION]... SOURCE DEST"
236#define cp_full_usage \
237 "Copies SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY.\n" \
238 "\n" \
239 "\t-a\tSame as -dpR\n" \
240 "\t-d\tPreserves links\n" \
241 "\t-p\tPreserves file attributes if possible\n" \
242 "\t-f\tforce (implied; ignored) - always set\n" \
243 "\t-i\tinteractive, prompt before overwrite\n" \
244 "\t-R,-r\tCopies directories recursively"
245
246#define cpio_trivial_usage \
247 "-[dimtuv][F cpiofile]"
248#define cpio_full_usage \
249 "Extract or list files from a cpio archive\n" \
250 "Main operation mode:\n" \
251 "\td\t\tmake leading directories\n" \
252 "\ti\t\textract\n" \
253 "\tm\t\tpreserve mtime\n" \
254 "\tt\t\tlist\n" \
255 "\tv\t\tverbose\n" \
256 "\tu\t\tunconditional overwrite\n" \
257 "\tF\t\tinput from file"
258
259#define crond_trivial_usage \
260 "-d[#] -c <crondir> -f -b"
261#define crond_full_usage \
262 "\t-d [#] -l [#] -S -L logfile -f -b -c dir\n" \
263 "\t-d num\tdebug level\n" \
264 "\t-l num\tlog level (8 - default)\n" \
265 "\t-S\tlog to syslogd (default)\n" \
266 "\t-L file\tlog to file\n" \
267 "\t-f\trun in fordeground\n" \
268 "\t-b\trun in background (default)\n" \
269 "\t-c dir\tworking dir"
270
271#define crontab_trivial_usage \
272 "[-c dir] {file|-}|[-u|-l|-e|-d user]"
273#define crontab_full_usage \
274 "\tfile <opts> replace crontab from file\n" \
275 "\t- <opts> replace crontab from stdin\n" \
276 "\t-u user specify user\n" \
277 "\t-l [user] list crontab for user\n" \
278 "\t-e [user] edit crontab for user\n" \
279 "\t-d [user] delete crontab for user\n" \
280 "\t-c dir specify crontab directory"
281
282
283#define cut_trivial_usage \
284 "[OPTION]... [FILE]..."
285#define cut_full_usage \
286 "Prints selected fields from each input FILE to standard output.\n\n" \
287 "Options:\n" \
288 "\t-b LIST\t\tOutput only bytes from LIST\n" \
289 "\t-c LIST\t\tOutput only characters from LIST\n" \
290 "\t-d CHAR\t\tUse CHAR instead of tab as the field delimiter\n" \
291 "\t-s\t\tOutput only the lines containing delimiter\n" \
292 "\t-f N\t\tPrint only these fields\n" \
293 "\t-n\t\tIgnored"
294#define cut_example_usage \
295 "$ echo "Hello world" | cut -f 1 -d ' '\n" \
296 "Hello\n" \
297 "$ echo "Hello world" | cut -f 2 -d ' '\n" \
298 "world\n"
299
300#ifdef CONFIG_FEATURE_DATE_ISOFMT
301#define USAGE_DATE_ISOFMT(a) a
302#else
303#define USAGE_DATE_ISOFMT(a)
304#endif
305
306#define date_trivial_usage \
307 "[OPTION]... [MMDDhhmm[[CC]YY][.ss]] [+FORMAT]"
308#define date_full_usage \
309 "Displays the current time in the given FORMAT, or sets the system date.\n" \
310 "\nOptions:\n" \
311 "\t-R\t\tOutputs RFC-822 compliant date string\n" \
312 "\t-d STRING\tDisplays time described by STRING, not `now'\n" \
313 USAGE_DATE_ISOFMT("\t-I[TIMESPEC]\tOutputs an ISO-8601 compliant date/time string.\n" \
314 "\t\t\tTIMESPEC=`date' (or missing) for date only,\n" \
315 "\t\t\t`hours', `minutes', or `seconds' for date and,\n" \
316 "\t\t\ttime to the indicated precision.\n") \
317 "\t-s\t\tSets time described by STRING\n" \
318 "\t-r FILE\t\tDisplays the last modification time of FILE\n" \
319 "\t-u\t\tPrints or sets Coordinated Universal Time"
320#define date_example_usage \
321 "$ date\n" \
322 "Wed Apr 12 18:52:41 MDT 2000\n"
323
324#define dc_trivial_usage \
325 "expression ..."
326#define dc_full_usage \
327 "This is a Tiny RPN calculator that understands the\n" \
328 "following operations: +, add, -, sub, *, mul, /, div, %, mod, "\
329 "**, exp, and, or, not, eor.\n" \
330 "For example: 'dc 2 2 add' -> 4, and 'dc 8 8 \\* 2 2 + /' -> 16.\n" \
331 "\nOptions:\n" \
332 "p - Prints the value on the top of the stack, without altering the stack.\n" \
333 "f - Prints the entire contents of the stack without altering anything.\n" \
334 "o - Pops the value off the top of the stack and uses it to set the output radix.\n" \
335 " Only 10 and 16 are supported."
336#define dc_example_usage \
337 "$ dc 2 2 + p\n" \
338 "4\n" \
339 "$ dc 8 8 \\* 2 2 + / p\n" \
340 "16\n" \
341 "$ dc 0 1 and p\n" \
342 "0\n" \
343 "$ dc 0 1 or p\n" \
344 "1\n" \
345 "$ echo 72 9 div 8 mul p | dc\n" \
346 "64\n"
347
348#define dd_trivial_usage \
349 "[if=FILE] [of=FILE] [bs=N] [count=N] [skip=N]\n" \
350 "\t [seek=N] [conv=notrunc|noerror|sync]"
351#define dd_full_usage \
352 "Copy a file, converting and formatting according to options\n\n" \
353 "\tif=FILE\t\tread from FILE instead of stdin\n" \
354 "\tof=FILE\t\twrite to FILE instead of stdout\n" \
355 "\tbs=N\t\tread and write N bytes at a time\n" \
356 "\tcount=N\t\tcopy only N input blocks\n" \
357 "\tskip=N\t\tskip N input blocks\n" \
358 "\tseek=N\t\tskip N output blocks\n" \
359 "\tconv=notrunc\tdon't truncate output file\n" \
360 "\tconv=noerror\tcontinue after read errors\n" \
361 "\tconv=sync\tpad blocks with zeros\n" \
362 "\n" \
363 "Numbers may be suffixed by c (x1), w (x2), b (x512), kD (x1000), k (x1024),\n" \
364 "MD (x1000000), M (x1048576), GD (x1000000000) or G (x1073741824)."
365#define dd_example_usage \
366 "$ dd if=/dev/zero of=/dev/ram1 bs=1M count=4\n" \
367 "4+0 records in\n" \
368 "4+0 records out\n"
369
370#define deallocvt_trivial_usage \
371 "[N]"
372#define deallocvt_full_usage \
373 "Deallocate unused virtual terminal /dev/ttyN"
374
375#define delgroup_trivial_usage \
376 "GROUP"
377#define delgroup_full_usage \
378 "Deletes group GROUP from the system"
379
380#define deluser_trivial_usage \
381 "USER"
382#define deluser_full_usage \
383 "Deletes user USER from the system"
384
385#ifdef CONFIG_DEVFSD_FG_NP
386 #define USAGE_DEVFSD_FG_NP(a) a
387#else
388 #define USAGE_DEVFSD_FG_NP(a)
389#endif
390
391#define devfsd_trivial_usage \
392 "mntpnt [-v]"\
393 USAGE_DEVFSD_FG_NP("[-fg][-np]" )
394#define devfsd_full_usage \
395 "Optional daemon for managing devfs permissions and old device name symlinks.\n" \
396 "\nOptions:\n" \
397 "\tmntpnt\tThe mount point where devfs is mounted.\n\n" \
398 "\t-v\tPrint the protocol version numbers for devfsd\n" \
399 "\t\tand the kernel-side protocol version and exits." \
400 USAGE_DEVFSD_FG_NP( "\n\n\t-fg\tRun the daemon in the foreground.\n\n" \
401 "\t-np\tExit after parsing the configuration file\n" \
402 "\t\tand processing synthetic REGISTER events.\n" \
403 "\t\tDo not poll for events.")
404
405#ifdef CONFIG_FEATURE_HUMAN_READABLE
406 #define USAGE_HUMAN_READABLE(a) a
407 #define USAGE_NOT_HUMAN_READABLE(a)
408#else
409 #define USAGE_HUMAN_READABLE(a)
410 #define USAGE_NOT_HUMAN_READABLE(a) a
411#endif
412#define df_trivial_usage \
413 "[-" USAGE_HUMAN_READABLE("hm") USAGE_NOT_HUMAN_READABLE("") "k] [FILESYSTEM ...]"
414#define df_full_usage \
415 "Print the filesystem space used and space available.\n\n" \
416 "Options:\n" \
417 USAGE_HUMAN_READABLE( \
418 "\n\t-h\tprint sizes in human readable format (e.g., 1K 243M 2G )\n" \
419 "\t-m\tprint sizes in megabytes\n" \
420 "\t-k\tprint sizes in kilobytes(default)") USAGE_NOT_HUMAN_READABLE( \
421 "\n\t-k\tprint sizes in kilobytes(compatibility)")
422#define df_example_usage \
423 "$ df\n" \
424 "Filesystem 1k-blocks Used Available Use% Mounted on\n" \
425 "/dev/sda3 8690864 8553540 137324 98% /\n" \
426 "/dev/sda1 64216 36364 27852 57% /boot\n" \
427 "$ df /dev/sda3\n" \
428 "Filesystem 1k-blocks Used Available Use% Mounted on\n" \
429 "/dev/sda3 8690864 8553540 137324 98% /\n"
430
431#define dirname_trivial_usage \
432 "FILENAME"
433#define dirname_full_usage \
434 "Strips non-directory suffix from FILENAME"
435#define dirname_example_usage \
436 "$ dirname /tmp/foo\n" \
437 "/tmp\n" \
438 "$ dirname /tmp/foo/\n" \
439 "/tmp\n"
440
441#define dmesg_trivial_usage \
442 "[-c] [-n LEVEL] [-s SIZE]"
443#define dmesg_full_usage \
444 "Prints or controls the kernel ring buffer\n\n" \
445 "Options:\n" \
446 "\t-c\t\tClears the ring buffer's contents after printing\n" \
447 "\t-n LEVEL\tSets console logging level\n" \
448 "\t-s SIZE\t\tUse a buffer of size SIZE"
449
450#define dos2unix_trivial_usage \
451 "[option] [FILE]"
452#define dos2unix_full_usage \
453 "Converts FILE from dos format to unix format. When no option\n" \
454 "is given, the input is converted to the opposite output format.\n" \
455 "When no file is given, uses stdin for input and stdout for output.\n\n" \
456 "Options:\n" \
457 "\t-u\toutput will be in UNIX format\n" \
458 "\t-d\toutput will be in DOS format"
459
460#define dpkg_trivial_usage \
461 "[-ilCPru] [-F option] package_name"
462#define dpkg_full_usage \
463 "dpkg is a utility to install, remove and manage Debian packages.\n\n" \
464 "Options:\n" \
465 "\t-i\t\tInstall the package\n" \
466 "\t-l\t\tList of installed packages\n" \
467 "\t-C\t\tConfigure an unpackaged package\n" \
468 "\t-F depends\tIgnore depency problems\n" \
469 "\t-P\t\tPurge all files of a package\n" \
470 "\t-r\t\tRemove all but the configuration files for a package\n" \
471 "\t-u\t\tUnpack a package, but don't configure it"
472
473#define dpkg_deb_trivial_usage \
474 "[-cefxX] FILE [argument]"
475#define dpkg_deb_full_usage \
476 "Perform actions on Debian packages (.debs)\n\n" \
477 "Options:\n" \
478 "\t-c\tList contents of filesystem tree\n" \
479 "\t-e\tExtract control files to [argument] directory\n" \
480 "\t-f\tDisplay control field name starting with [argument]\n" \
481 "\t-x\tExtract packages filesystem tree to directory\n" \
482 "\t-X\tVerbose extract"
483#define dpkg_deb_example_usage \
484 "$ dpkg-deb -X ./busybox_0.48-1_i386.deb /tmp\n"
485
486#ifdef CONFIG_FEATURE_DU_DEFALT_BLOCKSIZE_1K
487#define USAGE_DU_DEFALT_BLOCKSIZE_1k(a) a
488#define USAGE_NOT_DU_DEFALT_BLOCKSIZE_1k(a)
489#else
490#define USAGE_DU_DEFALT_BLOCKSIZE_1k(a)
491#define USAGE_NOT_DU_DEFALT_BLOCKSIZE_1k(a) a
492#endif
493
494#define du_trivial_usage \
495 "[-aHLdclsx" USAGE_HUMAN_READABLE("hm") "k] [FILE]..."
496#define du_full_usage \
497 "Summarizes disk space used for each FILE and/or directory.\n" \
498 "Disk space is printed in units of " \
499 USAGE_DU_DEFALT_BLOCKSIZE_1k("1024") USAGE_NOT_DU_DEFALT_BLOCKSIZE_1k("512") \
500 " bytes.\n\n" \
501 "Options:\n" \
502 "\t-a\tshow sizes of files in addition to directories\n" \
503 "\t-H\tfollow symbolic links that are FILE command line args\n" \
504 "\t-L\tfollow all symbolic links encountered\n" \
505 "\t-d N\tlimit output to directories (and files with -a) of depth < N\n" \
506 "\t-c\toutput a grand total\n" \
507 "\t-l\tcount sizes many times if hard linked\n" \
508 "\t-s\tdisplay only a total for each argument\n" \
509 "\t-x\tskip directories on different filesystems\n" \
510 USAGE_HUMAN_READABLE( \
511 "\t-h\tprint sizes in human readable format (e.g., 1K 243M 2G )\n" \
512 "\t-m\tprint sizes in megabytes\n" ) \
513 "\t-k\tprint sizes in kilobytes" USAGE_DU_DEFALT_BLOCKSIZE_1k("(default)")
514#define du_example_usage \
515 "$ du\n" \
516 "16 ./CVS\n" \
517 "12 ./kernel-patches/CVS\n" \
518 "80 ./kernel-patches\n" \
519 "12 ./tests/CVS\n" \
520 "36 ./tests\n" \
521 "12 ./scripts/CVS\n" \
522 "16 ./scripts\n" \
523 "12 ./docs/CVS\n" \
524 "104 ./docs\n" \
525 "2417 .\n"
526
527#define dumpkmap_trivial_usage \
528 "> keymap"
529#define dumpkmap_full_usage \
530 "Prints out a binary keyboard translation table to standard output."
531#define dumpkmap_example_usage \
532 "$ dumpkmap > keymap\n"
533
534#define dumpleases_trivial_usage \
535 "[-r|-a] [-f LEASEFILE]"
536#define dumpleases_full_usage \
537 "Displays the DHCP leases granted by udhcpd.\n\n" \
538 "Options:\n" \
539 "\t-f,\t--file=FILENAME\tLeases file to load\n" \
540 "\t-r,\t--remaining\tInterpret lease times as time remaing\n" \
541 "\t-a,\t--absolute\tInterpret lease times as expire time"
542
543#ifdef CONFIG_FEATURE_FANCY_ECHO
544 #define USAGE_FANCY_ECHO(a) a
545#else
546 #define USAGE_FANCY_ECHO(a)
547#endif
548
549#define echo_trivial_usage \
550 USAGE_FANCY_ECHO("[-neE] ") "[ARG ...]"
551#define echo_full_usage \
552 "Prints the specified ARGs to stdout\n\n" \
553 USAGE_FANCY_ECHO("Options:\n" \
554 "\t-n\tsuppress trailing newline\n" \
555 "\t-e\tinterpret backslash-escaped characters (i.e., \\t=tab)\n" \
556 "\t-E\tdisable interpretation of backslash-escaped characters")
557#define echo_example_usage \
558 "$ echo "Erik is cool"\n" \
559 "Erik is cool\n" \
560 USAGE_FANCY_ECHO("$ echo -e "Erik\\nis\\ncool"\n" \
561 "Erik\n" \
562 "is\n" \
563 "cool\n" \
564 "$ echo "Erik\\nis\\ncool"\n" \
565 "Erik\\nis\\ncool\n")
566
567#define env_trivial_usage \
568 "[-iu] [-] [name=value]... [command]"
569#define env_full_usage \
570 "Prints the current environment or runs a program after setting\n" \
571 "up the specified environment.\n\n" \
572 "Options:\n" \
573 "\t-, -i\tstart with an empty environment\n" \
574 "\t-u\tremove variable from the environment"
575
576#define expr_trivial_usage \
577 "EXPRESSION"
578#define expr_full_usage \
579 "Prints the value of EXPRESSION to standard output.\n\n" \
580 "EXPRESSION may be:\n" \
581 "\tARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n" \
582 "\tARG1 & ARG2 ARG1 if neither argument is null or 0, otherwise 0\n" \
583 "\tARG1 < ARG2 ARG1 is less than ARG2\n" \
584 "\tARG1 <= ARG2 ARG1 is less than or equal to ARG2\n" \
585 "\tARG1 = ARG2 ARG1 is equal to ARG2\n" \
586 "\tARG1 != ARG2 ARG1 is unequal to ARG2\n" \
587 "\tARG1 >= ARG2 ARG1 is greater than or equal to ARG2\n" \
588 "\tARG1 > ARG2 ARG1 is greater than ARG2\n" \
589 "\tARG1 + ARG2 arithmetic sum of ARG1 and ARG2\n" \
590 "\tARG1 - ARG2 arithmetic difference of ARG1 and ARG2\n" \
591 "\tARG1 * ARG2 arithmetic product of ARG1 and ARG2\n" \
592 "\tARG1 / ARG2 arithmetic quotient of ARG1 divided by ARG2\n" \
593 "\tARG1 % ARG2 arithmetic remainder of ARG1 divided by ARG2\n" \
594 "\tSTRING : REGEXP anchored pattern match of REGEXP in STRING\n" \
595 "\tmatch STRING REGEXP same as STRING : REGEXP\n" \
596 "\tsubstr STRING POS LENGTH substring of STRING, POS counted from 1\n" \
597 "\tindex STRING CHARS index in STRING where any CHARS is found,\n" \
598 "\t or 0\n" \
599 "\tlength STRING length of STRING\n" \
600 "\tquote TOKEN interpret TOKEN as a string, even if\n" \
601 "\t it is a keyword like `match' or an\n" \
602 "\t operator like `/'\n" \
603 "\t( EXPRESSION ) value of EXPRESSION\n\n" \
604 "Beware that many operators need to be escaped or quoted for shells.\n" \
605 "Comparisons are arithmetic if both ARGs are numbers, else\n" \
606 "lexicographical. Pattern matches return the string matched between \n" \
607 "\\( and \\) or null; if \\( and \\) are not used, they return the number \n" \
608 "of characters matched or 0."
609
610#define false_trivial_usage \
611 ""
612#define false_full_usage \
613 "Return an exit code of FALSE (1)."
614#define false_example_usage \
615 "$ false\n" \
616 "$ echo $?\n" \
617 "1\n"
618
619#define fbset_trivial_usage \
620 "[options] [mode]"
621#define fbset_full_usage \
622 "Show and modify frame buffer settings"
623#define fbset_example_usage \
624 "$ fbset\n" \
625 "mode "1024x768-76"\n" \
626 "\t# D: 78.653 MHz, H: 59.949 kHz, V: 75.694 Hz\n" \
627 "\tgeometry 1024 768 1024 768 16\n" \
628 "\ttimings 12714 128 32 16 4 128 4\n" \
629 "\taccel false\n" \
630 "\trgba 5/11,6/5,5/0,0/0\n" \
631 "endmode\n"
632
633#define fdflush_trivial_usage \
634 "DEVICE"
635#define fdflush_full_usage \
636 "Forces floppy disk drive to detect disk change"
637
638#define fdformat_trivial_usage \
639 "[-n] DEVICE"
640#define fdformat_full_usage \
641 "Low-level formats a floppy disk\n\n" \
642 "Options:\n" \
643 "\t-n\tDon't verify after format"
644
645#define fdisk_trivial_usage \
646 "[-luv] [-C CYLINDERS] [-H HEADS] [-S SECTORS] [-b SSZ] DISK"
647#define fdisk_full_usage \
648 "Change partition table\n" \
649 "Options:\n" \
650 "\t-l List partition table(s)\n" \
651 "\t-u Give Start and End in sector (instead of cylinder) units\n" \
652 "\t-s PARTITION Give partition size(s) in blocks\n" \
653 "\t-b 2048: (for certain MO disks) use 2048-byte sectors\n" \
654 "\t-C CYLINDERS Set the number of cylinders\n" \
655 "\t-H HEADS Set the number of heads\n" \
656 "\t-S SECTORS Set the number of sectors\n" \
657 "\t-v Give fdisk version"
658
659#ifdef CONFIG_FEATURE_FIND_TYPE
660 #define USAGE_FIND_TYPE(a) a
661#else
662 #define USAGE_FIND_TYPE(a)
663#endif
664#ifdef CONFIG_FEATURE_FIND_PERM
665 #define USAGE_FIND_PERM(a) a
666#else
667 #define USAGE_FIND_PERM(a)
668#endif
669#ifdef CONFIG_FEATURE_FIND_MTIME
670 #define USAGE_FIND_MTIME(a) a
671#else
672 #define USAGE_FIND_MTIME(a)
673#endif
674#ifdef CONFIG_FEATURE_FIND_NEWER
675 #define USAGE_FIND_NEWER(a) a
676#else
677 #define USAGE_FIND_NEWER(a)
678#endif
679#ifdef CONFIG_FEATURE_FIND_INUM
680 #define USAGE_FIND_INUM(a) a
681#else
682 #define USAGE_FIND_INUM(a)
683#endif
684
685#define find_trivial_usage \
686 "[PATH...] [EXPRESSION]"
687#define find_full_usage \
688 "Search for files in a directory hierarchy. The default PATH is\n" \
689 "the current directory; default EXPRESSION is '-print'\n" \
690 "\nEXPRESSION may consist of:\n" \
691 "\t-follow\t\tDereference symbolic links.\n" \
692 "\t-name PATTERN\tFile name (leading directories removed) matches PATTERN.\n" \
693 "\t-print\t\tPrint (default and assumed).\n" \
694 USAGE_FIND_TYPE( \
695 "\n\t-type X\t\tFiletype matches X (where X is one of: f,d,l,b,c,...)" \
696) USAGE_FIND_PERM( \
697 "\n\t-perm PERMS\tPermissions match any of (+NNN); all of (-NNN);\n\t\t\tor exactly (NNN)" \
698) USAGE_FIND_MTIME( \
699 "\n\t-mtime TIME\tModified time is greater than (+N); less than (-N);\n\t\t\tor exactly (N) days" \
700) USAGE_FIND_NEWER( \
701 "\n\t-newer FILE\tModified time is more recent than FILE's" \
702) USAGE_FIND_INUM( \
703 "\n\t-inum N\t\tFile has inode number N")
704#define find_example_usage \
705 "$ find / -name passwd\n" \
706 "/etc/passwd\n"
707
708#define fold_trivial_usage \
709 "[-bsw] [FILE]"
710#define fold_full_usage \
711 "Wrap input lines in each FILE (standard input by default), writing to\n" \
712 "standard output.\n\n" \
713 "Options:\n" \
714 "\t-b\tcount bytes rather than columns\n" \
715 "\t-s\tbreak at spaces\n" \
716 "\t-w\tuse WIDTH columns instead of 80"
717
718#define free_trivial_usage \
719 ""
720#define free_full_usage \
721 "Displays the amount of free and used system memory"
722#define free_example_usage \
723 "$ free\n" \
724 " total used free shared buffers\n" \
725 " Mem: 257628 248724 8904 59644 93124\n" \
726 " Swap: 128516 8404 120112\n" \
727 "Total: 386144 257128 129016\n" \
728
729#define freeramdisk_trivial_usage \
730 "DEVICE"
731#define freeramdisk_full_usage \
732 "Frees all memory used by the specified ramdisk."
733#define freeramdisk_example_usage \
734 "$ freeramdisk /dev/ram2\n"
735
736#define fsck_minix_trivial_usage \
737 "[-larvsmf] /dev/name"
738#define fsck_minix_full_usage \
739 "Performs a consistency check for MINIX filesystems.\n\n" \
740 "Options:\n" \
741 "\t-l\tLists all filenames\n" \
742 "\t-r\tPerform interactive repairs\n" \
743 "\t-a\tPerform automatic repairs\n" \
744 "\t-v\tverbose\n" \
745 "\t-s\tOutputs super-block information\n" \
746 "\t-m\tActivates MINIX-like \"mode not cleared\" warnings\n" \
747 "\t-f\tForce file system check."
748
749#define ftpget_trivial_usage \
750 "[options] remote-host local-file remote-file"
751#define ftpget_full_usage \
752 "Retrieve a remote file via FTP.\n\n" \
753 "Options:\n" \
754 "\t-c, --continue Continue a previous transfer\n" \
755 "\t-v, --verbose Verbose\n" \
756 "\t-u, --username Username to be used\n" \
757 "\t-p, --password Password to be used\n" \
758 "\t-P, --port Port number to be used"
759
760#define ftpput_trivial_usage \
761 "[options] remote-host remote-file local-file"
762#define ftpput_full_usage \
763 "Store a local file on a remote machine via FTP.\n\n" \
764 "Options:\n" \
765 "\t-v, --verbose Verbose\n" \
766 "\t-u, --username Username to be used\n" \
767 "\t-p, --password Password to be used\n" \
768 "\t-P, --port Port number to be used"
769
770#define getopt_trivial_usage \
771 "[OPTIONS]..."
772#define getopt_full_usage \
773 "Parse command options\n" \
774 "\t-a, --alternative Allow long options starting with single -\n" \
775 "\t-l, --longoptions=longopts Long options to be recognized\n" \
776 "\t-n, --name=progname The name under which errors are reported\n" \
777 "\t-o, --options=optstring Short options to be recognized\n" \
778 "\t-q, --quiet Disable error reporting by getopt(3)\n" \
779 "\t-Q, --quiet-output No normal output\n" \
780 "\t-s, --shell=shell Set shell quoting conventions\n" \
781 "\t-T, --test Test for getopt(1) version\n" \
782 "\t-u, --unquoted Do not quote the output"
783#define getopt_example_usage \
784 "$ cat getopt.test\n" \
785 "#!/bin/sh\n" \
786 "GETOPT=`getopt -o ab:c:: --long a-long,b-long:,c-long:: \\\n" \
787 " -n 'example.busybox' -- "$@"`\n" \
788 "if [ $? != 0 ] ; then exit 1 ; fi\n" \
789 "eval set -- "$GETOPT"\n" \
790 "while true ; do\n" \
791 " case $1 in\n" \
792 " -a|--a-long) echo \"Option a\" ; shift ;;\n" \
793 " -b|--b-long) echo \"Option b, argument `$2'\" ; shift 2 ;;\n" \
794 " -c|--c-long)\n" \
795 " case "$2" in\n" \
796 " \"\") echo \"Option c, no argument\"; shift 2 ;;\n" \
797 " *) echo \"Option c, argument `$2'\" ; shift 2 ;;\n" \
798 " esac ;;\n" \
799 " --) shift ; break ;;\n" \
800 " *) echo \"Internal error!\" ; exit 1 ;;\n" \
801 " esac\n" \
802 "done\n"
803
804
805#define getpkg_trivial_usage \
806 "[-afk] [PACKAGE] {[URL] | [DIR]}"
807#define getpkg_full_usage \
808 "Install a Trinux PACKAGE from a FILE or an URL ." \
809 "\t-a,\t\tget all packages\n" \
810 "\t-f,\t\tpackage file, no need to download\n" \
811 "\t-k,\t\tkernel package"
812#define getpkg_example_usage \
813 "$ getpkg\n" \
814 "$ getpkg -a\n" \
815 "$ getpkg -f name\n" \
816 "$ getpkg -fk name /media/cdrom/trinux/pkg\n" \
817 "$ getpkg -k name\n" \
818 "$ getpkg name http://www.trinux.org/pkg/\n"
819
820
821#define getty_trivial_usage \
822 "[OPTIONS]... baud_rate,... line [termtype]"
823#define getty_full_usage \
824 "Opens a tty, prompts for a login name, then invokes /bin/login\n\n" \
825 "Options:\n" \
826 "\t-h\t\tEnable hardware (RTS/CTS) flow control.\n" \
827 "\t-i\t\tDo not display /etc/issue before running login.\n" \
828 "\t-L\t\tLocal line, so do not do carrier detect.\n" \
829 "\t-m\t\tGet baud rate from modem's CONNECT status message.\n" \
830 "\t-w\t\tWait for a CR or LF before sending /etc/issue.\n" \
831 "\t-n\t\tDo not prompt the user for a login name.\n" \
832 "\t-f issue_file\tDisplay issue_file instead of /etc/issue.\n" \
833 "\t-l login_app\tInvoke login_app instead of /bin/login.\n" \
834 "\t-t timeout\tTerminate after timeout if no username is read.\n" \
835 "\t-I initstring\tSets the init string to send before anything else.\n" \
836 "\t-H login_host\tLog login_host into the utmp file as the hostname."
837
838
839#define grep_trivial_usage \
840 "[-ihHnqvs] PATTERN [FILEs...]"
841#define grep_full_usage \
842 "Search for PATTERN in each FILE or standard input.\n\n" \
843 "Options:\n" \
844 "\t-H\tprefix output lines with filename where match was found\n" \
845 "\t-h\tsuppress the prefixing filename on output\n" \
846 "\t-i\tignore case distinctions\n" \
847 "\t-l\tlist names of files that match\n" \
848 "\t-n\tprint line number with output lines\n" \
849 "\t-q\tbe quiet. Returns 0 if result was found, 1 otherwise\n" \
850 "\t-v\tselect non-matching lines\n" \
851 "\t-s\tsuppress file open/read error messages"
852#define grep_example_usage \
853 "$ grep root /etc/passwd\n" \
854 "root:x:0:0:root:/root:/bin/bash\n" \
855 "$ grep ^[rR]oo. /etc/passwd\n" \
856 "root:x:0:0:root:/root:/bin/bash\n"
857
858#define gunzip_trivial_usage \
859 "[OPTION]... FILE"
860#define gunzip_full_usage \
861 "Uncompress FILE (or standard input if FILE is '-').\n\n" \
862 "Options:\n" \
863 "\t-c\tWrite output to standard output\n" \
864 "\t-f\tForce read when source is a terminal\n" \
865 "\t-t\tTest compressed file integrity"
866#define gunzip_example_usage \
867 "$ ls -la /tmp/BusyBox*\n" \
868 "-rw-rw-r-- 1 andersen andersen 557009 Apr 11 10:55 /tmp/BusyBox-0.43.tar.gz\n" \
869 "$ gunzip /tmp/BusyBox-0.43.tar.gz\n" \
870 "$ ls -la /tmp/BusyBox*\n" \
871 "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/BusyBox-0.43.tar\n"
872
873#define gzip_trivial_usage \
874 "[OPTION]... [FILE]..."
875#define gzip_full_usage \
876 "Compress FILE(s) with maximum compression.\n" \
877 "When FILE is '-' or unspecified, reads standard input. Implies -c.\n\n" \
878 "Options:\n" \
879 "\t-c\tWrite output to standard output instead of FILE.gz\n" \
880 "\t-d\tDecompress\n" \
881 "\t-f\tForce write when destination is a terminal"
882#define gzip_example_usage \
883 "$ ls -la /tmp/busybox*\n" \
884 "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/busybox.tar\n" \
885 "$ gzip /tmp/busybox.tar\n" \
886 "$ ls -la /tmp/busybox*\n" \
887 "-rw-rw-r-- 1 andersen andersen 554058 Apr 14 17:49 /tmp/busybox.tar.gz\n"
888
889#define halt_trivial_usage \
890 "[-d<delay>]"
891#define halt_full_usage \
892 "Halt the system.\n" \
893 "Options:\n" \
894 "\t-d\t\tdelay interval for halting."
895
896#ifdef CONFIG_FEATURE_HDPARM_GET_IDENTITY
897#define USAGE_HDPARM_IDENT(a) a
898#else
899#define USAGE_HDPARM_IDENT(a)
900#endif
901
902#ifdef CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF
903#define USAGE_SCAN_HWIF(a) a
904#else
905#define USAGE_SCAN_HWIF(a)
906#endif
907
908#ifdef CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF
909#define USAGE_UNREGISTER_HWIF(a) a
910#else
911#define USAGE_UNREGISTER_HWIF(a)
912#endif
913
914#ifdef CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET
915#define USAGE_DRIVE_RESET(a) a
916#else
917#define USAGE_DRIVE_RESET(a)
918#endif
919
920#ifdef CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF
921#define USAGE_TRISTATE_HWIF(a) a
922#else
923#define USAGE_TRISTATE_HWIF(a)
924#endif
925
926#ifdef CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA
927#define USAGE_GETSET_DMA(a) a
928#else
929#define USAGE_GETSET_DMA(a)
930#endif
931
932#define hdparm_trivial_usage \
933 "[options] [device] .."
934#define hdparm_full_usage \
935 "Options:" \
936 "\t-a get/set fs readahead\n" \
937 "\t-A set drive read-lookahead flag (0/1)\n" \
938 "\t-b get/set bus state (0 == off, 1 == on, 2 == tristate)\n" \
939 "\t-B set Advanced Power Management setting (1-255)\n" \
940 "\t-c get/set IDE 32-bit IO setting\n" \
941 "\t-C check IDE power mode status\n" \
942 USAGE_GETSET_DMA("\t-d get/set using_dma flag\n") \
943 "\t-D enable/disable drive defect-mgmt\n" \
944 "\t-f flush buffer cache for device on exit\n" \
945 "\t-g display drive geometry\n" \
946 "\t-h display terse usage information\n" \
947 "\t-i display drive identification\n" \
948 USAGE_HDPARM_IDENT("\t-I detailed/current information directly from drive\n") \
949 USAGE_HDPARM_IDENT("\t-Istdin similar to -I, but wants /proc/ide/" "*" "/hd?/identify as input\n") \
950 "\t-k get/set keep_settings_over_reset flag (0/1)\n" \
951 "\t-K set drive keep_features_over_reset flag (0/1)\n" \
952 "\t-L set drive doorlock (0/1) (removable harddisks only)\n" \
953 "\t-m get/set multiple sector count\n" \
954 "\t-n get/set ignore-write-errors flag (0/1)\n" \
955 "\t-p set PIO mode on IDE interface chipset (0,1,2,3,4,...)\n" \
956 "\t-P set drive prefetch count\n" \
957 "\t-q change next setting quietly\n" \
958 "\t-Q get/set DMA tagged-queuing depth (if supported)\n" \
959 "\t-r get/set readonly flag (DANGEROUS to set)\n" \
960 USAGE_SCAN_HWIF("\t-R register an IDE interface (DANGEROUS)\n") \
961 "\t-S set standby (spindown) timeout\n" \
962 "\t-t perform device read timings\n" \
963 "\t-T perform cache read timings\n" \
964 "\t-u get/set unmaskirq flag (0/1)\n" \
965 USAGE_UNREGISTER_HWIF("\t-U un-register an IDE interface (DANGEROUS)\n") \
966 "\t-v defaults; same as -mcudkrag for IDE drives\n" \
967 "\t-V display program version and exit immediately\n" \
968 USAGE_DRIVE_RESET("\t-w perform device reset (DANGEROUS)\n") \
969 "\t-W set drive write-caching flag (0/1) (DANGEROUS)\n" \
970 USAGE_TRISTATE_HWIF("\t-x tristate device for hotswap (0/1) (DANGEROUS)\n") \
971 "\t-X set IDE xfer mode (DANGEROUS)\n" \
972 "\t-y put IDE drive in standby mode\n" \
973 "\t-Y put IDE drive to sleep\n" \
974 "\t-Z disable Seagate auto-powersaving mode\n" \
975 "\t-z re-read partition table"
976
977#ifdef CONFIG_FEATURE_FANCY_HEAD
978#define USAGE_FANCY_HEAD(a) a
979#else
980#define USAGE_FANCY_HEAD(a)
981#endif
982
983#define head_trivial_usage \
984 "[OPTION]... [FILE]..."
985#define head_full_usage \
986 "Print first 10 lines of each FILE to standard output.\n" \
987 "With more than one FILE, precede each with a header giving the\n" \
988 "file name. With no FILE, or when FILE is -, read standard input.\n\n" \
989 "Options:\n" \
990 "\t-n NUM\t\tPrint first NUM lines instead of first 10" \
991 USAGE_FANCY_HEAD( \
992 "\n\t-c NUM\t\toutput the first NUM bytes\n" \
993 "\t-q\t\tnever output headers giving file names\n" \
994 "\t-v\t\talways output headers giving file names" )
995#define head_example_usage \
996 "$ head -n 2 /etc/passwd\n" \
997 "root:x:0:0:root:/root:/bin/bash\n" \
998 "daemon:x:1:1:daemon:/usr/sbin:/bin/sh\n"
999
1000#define hexdump_trivial_usage \
1001 "[-[bcdefnosvx]] [OPTION] FILE"
1002#define hexdump_full_usage \
1003 "The hexdump utility is a filter which displays the specified files,\n" \
1004 "or the standard input, if no files are specified, in a user specified\n"\
1005 "format\n" \
1006 "\t-b\t\tOne-byte octal display\n" \
1007 "\t-c\t\tOne-byte character display\n" \
1008 "\t-d\t\tTwo-byte decimal display\n" \
1009 "\t-e FORMAT STRING\n" \
1010 "\t-f FORMAT FILE\n" \
1011 "\t-n LENGTH\tInterpret only length bytes of input\n" \
1012 "\t-o\t\tTwo-byte octal display\n" \
1013 "\t-s OFFSET\tSkip offset byte\n" \
1014 "\t-v\t\tdisplay all input data\n" \
1015 "\t-x\t\tTwo-byte hexadecimal display"
1016
1017#define hostid_trivial_usage \
1018 ""
1019#define hostid_full_usage \
1020 "Print out a unique 32-bit identifier for the machine."
1021
1022#define hostname_trivial_usage \
1023 "[OPTION] {hostname | -F FILE}"
1024#define hostname_full_usage \
1025 "Get or set the hostname or DNS domain name. If a hostname is given\n" \
1026 "(or FILE with the -F parameter), the host name will be set.\n\n" \
1027 "Options:\n" \
1028 "\t-s\tShort\n" \
1029 "\t-i\tAddresses for the hostname\n" \
1030 "\t-d\tDNS domain name\n" \
1031 "\t-f\tFully qualified domain name\n" \
1032 "\t-F FILE\tUse the contents of FILE to specify the hostname"
1033#define hostname_example_usage \
1034 "$ hostname\n" \
1035 "sage\n"
1036
1037#ifdef CONFIG_FEATURE_HTTPD_BASIC_AUTH
1038 #define USAGE_HTTPD_BASIC_AUTH(a) a
1039 #ifdef CONFIG_FEATURE_HTTPD_AUTH_MD5
1040 #define USAGE_HTTPD_AUTH_MD5(a) a
1041 #else
1042 #define USAGE_HTTPD_AUTH_MD5(a)
1043 #endif
1044#else
1045 #define USAGE_HTTPD_BASIC_AUTH(a)
1046 #define USAGE_HTTPD_AUTH_MD5(a)
1047#endif
1048#ifdef CONFIG_FEATURE_HTTPD_USAGE_FROM_INETD_ONLY
1049 #define USAGE_HTTPD_STANDALONE(a)
1050 #define USAGE_HTTPD_SETUID(a)
1051#else
1052 #define USAGE_HTTPD_STANDALONE(a) a
1053 #ifdef CONFIG_FEATURE_HTTPD_SETUID
1054 #define USAGE_HTTPD_SETUID(a) a
1055 #else
1056 #define USAGE_HTTPD_SETUID(a)
1057 #endif
1058#endif
1059#define httpd_trivial_usage \
1060 "[-c <conf file>]" \
1061 USAGE_HTTPD_STANDALONE(" [-p <port>]") \
1062 USAGE_HTTPD_SETUID(" [-u user]") \
1063 USAGE_HTTPD_BASIC_AUTH(" [-r <realm>]") \
1064 USAGE_HTTPD_AUTH_MD5(" [-m pass]") \
1065 " [-h home]" \
1066 " [-d/-e <string>]"
1067#define httpd_full_usage \
1068 "Listens for incoming http server requests.\n\n"\
1069 "Options:\n" \
1070 "\t-c FILE\t\tSpecifies configuration file. (default httpd.conf)\n" \
1071 USAGE_HTTPD_STANDALONE("\t-p PORT\tServer port (default 80)\n") \
1072 USAGE_HTTPD_SETUID("\t-u USER\tSet uid to USER after listening privileges port\n") \
1073 USAGE_HTTPD_BASIC_AUTH("\t-r REALM\tAuthentication Realm for Basic Authentication\n") \
1074 USAGE_HTTPD_AUTH_MD5("\t-m PASS\t\tCrypt PASS with md5 algorithm\n") \
1075 "\t-h HOME \tSpecifies http HOME directory (default ./)\n" \
1076 "\t-e STRING\tHtml encode STRING\n" \
1077 "\t-d STRING\tURL decode STRING"
1078
1079#define hwclock_trivial_usage \
1080 "[-r|--show] [-s|--hctosys] [-w|--systohc] [-l|--localtime] [-u|--utc]"
1081#define hwclock_full_usage \
1082 "Query and set the hardware clock (RTC)\n\n" \
1083 "Options:\n" \
1084 "\t-r\tread hardware clock and print result\n" \
1085 "\t-s\tset the system time from the hardware clock\n" \
1086 "\t-w\tset the hardware clock to the current system time\n" \
1087 "\t-u\tthe hardware clock is kept in coordinated universal time\n" \
1088 "\t-l\tthe hardware clock is kept in local time"
1089
1090#ifdef CONFIG_SELINUX
1091 #define USAGE_SELINUX(a) a
1092#else
1093 #define USAGE_SELINUX(a)
1094#endif
1095
1096#define id_trivial_usage \
1097 "[OPTIONS]... [USERNAME]"
1098#define id_full_usage \
1099 "Print information for USERNAME or the current user\n\n" \
1100 "Options:\n" \
1101 USAGE_SELINUX("\t-c\tprints only the security context\n") \
1102 "\t-g\tprints only the group ID\n" \
1103 "\t-u\tprints only the user ID\n" \
1104 "\t-n\tprint a name instead of a number\n" \
1105 "\t-r\tprints the real user ID instead of the effective ID"
1106#define id_example_usage \
1107 "$ id\n" \
1108 "uid=1000(andersen) gid=1000(andersen)\n"
1109
1110#ifdef CONFIG_FEATURE_IFCONFIG_SLIP
1111 #define USAGE_SIOCSKEEPALIVE(a) a
1112#else
1113 #define USAGE_SIOCSKEEPALIVE(a)
1114#endif
1115#ifdef CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
1116 #define USAGE_IFCONFIG_MII(a) a
1117#else
1118 #define USAGE_IFCONFIG_MII(a)
1119#endif
1120#ifdef CONFIG_FEATURE_IFCONFIG_HW
1121 #define USAGE_IFCONFIG_HW(a) a
1122#else
1123 #define USAGE_IFCONFIG_HW(a)
1124#endif
1125#ifdef CONFIG_FEATURE_IFCONFIG_STATUS
1126 #define USAGE_IFCONFIG_OPT_A(a) a
1127#else
1128 #define USAGE_IFCONFIG_OPT_A(a)
1129#endif
1130#ifdef CONFIG_FEATURE_IPV6
1131 #define USAGE_IPV6(a) a
1132#else
1133 #define USAGE_IPV6(a)
1134#endif
1135
1136#define ifconfig_trivial_usage \
1137 USAGE_IFCONFIG_OPT_A("[-a]") " <interface> [<address>]"
1138#define ifconfig_full_usage \
1139 "configure a network interface\n\n" \
1140 "Options:\n" \
1141 USAGE_IPV6("[add <address>[/<prefixlen>]]\n") \
1142 USAGE_IPV6("[del <address>[/<prefixlen>]]\n") \
1143 "\t[[-]broadcast [<address>]] [[-]pointopoint [<address>]]\n" \
1144 "\t[netmask <address>] [dstaddr <address>]\n" \
1145 USAGE_SIOCSKEEPALIVE("\t[outfill <NN>] [keepalive <NN>]\n") \
1146 "\t" USAGE_IFCONFIG_HW("[hw ether <address>] ") \
1147 "[metric <NN>] [mtu <NN>]\n" \
1148 "\t[[-]trailers] [[-]arp] [[-]allmulti]\n" \
1149 "\t[multicast] [[-]promisc] [txqueuelen <NN>] [[-]dynamic]\n" \
1150 USAGE_IFCONFIG_MII("\t[mem_start <NN>] [io_addr <NN>] [irq <NN>]\n") \
1151 "\t[up|down] ..."
1152
1153#define ifup_trivial_usage \
1154 "<-ahinv> <ifaces...>"
1155#define ifup_full_usage \
1156 "ifup <options> <ifaces...>\n\n" \
1157 "Options:\n" \
1158 "\t-h\tthis help\n" \
1159 "\t-a\tde/configure all interfaces automatically\n" \
1160 "\t-i FILE\tuse FILE for interface definitions\n" \
1161 "\t-n\tprint out what would happen, but don't do it\n" \
1162 "\t\t\t(note that this option doesn't disable mappings)\n" \
1163 "\t-v\tprint out what would happen before doing it\n" \
1164 "\t-m\tdon't run any mappings\n" \
1165 "\t-f\tforce de/configuration"
1166
1167#define ifdown_trivial_usage \
1168 "<-ahinv> <ifaces...>"
1169#define ifdown_full_usage \
1170 "ifdown <options> <ifaces...>\n\n" \
1171 "Options:\n" \
1172 "\t-h\tthis help\n" \
1173 "\t-a\tde/configure all interfaces automatically\n" \
1174 "\t-i FILE\tuse FILE for interface definitions\n" \
1175 "\t-n\tprint out what would happen, but don't do it\n" \
1176 "\t\t(note that this option doesn't disable mappings)\n" \
1177 "\t-v\tprint out what would happen before doing it\n" \
1178 "\t-m\tdon't run any mappings\n" \
1179 "\t-f\tforce de/configuration"
1180
1181#define inetd_trivial_usage \
1182 "[-q len] [conf]"
1183#define inetd_full_usage \
1184 "Listens for network connections and launches programs\n\n" \
1185 "Option:\n" \
1186 "\t-q\tSets the size of the socket listen queue to\n" \
1187 "\t\tthe specified value. Default is 128."
1188
1189#define init_trivial_usage \
1190 ""
1191#define init_full_usage \
1192 "Init is the parent of all processes."
1193#define init_notes_usage \
1194"This version of init is designed to be run only by the kernel.\n" \
1195"\n" \
1196"BusyBox init doesn't support multiple runlevels. The runlevels field of\n" \
1197"the /etc/inittab file is completely ignored by BusyBox init. If you want \n" \
1198"runlevels, use sysvinit.\n" \
1199"\n" \
1200"BusyBox init works just fine without an inittab. If no inittab is found, \n" \
1201"it has the following default behavior:\n" \
1202"\n" \
1203" ::sysinit:/etc/init.d/rcS\n" \
1204" ::askfirst:/bin/sh\n" \
1205" ::ctrlaltdel:/sbin/reboot\n" \
1206" ::shutdown:/sbin/swapoff -a\n" \
1207" ::shutdown:/bin/umount -a -r\n" \
1208" ::restart:/sbin/init\n" \
1209"\n" \
1210"if it detects that /dev/console is _not_ a serial console, it will also run:\n" \
1211"\n" \
1212" tty2::askfirst:/bin/sh\n" \
1213" tty3::askfirst:/bin/sh\n" \
1214" tty4::askfirst:/bin/sh\n" \
1215"\n" \
1216"If you choose to use an /etc/inittab file, the inittab entry format is as follows:\n" \
1217"\n" \
1218" <id>:<runlevels>:<action>:<process>\n" \
1219"\n" \
1220" <id>:\n" \
1221"\n" \
1222" WARNING: This field has a non-traditional meaning for BusyBox init!\n" \
1223" The id field is used by BusyBox init to specify the controlling tty for\n" \
1224" the specified process to run on. The contents of this field are\n" \
1225" appended to "/dev/" and used as-is. There is no need for this field to\n" \
1226" be unique, although if it isn't you may have strange results. If this\n" \
1227" field is left blank, the controlling tty is set to the console. Also\n" \
1228" note that if BusyBox detects that a serial console is in use, then only\n" \
1229" entries whose controlling tty is either the serial console or /dev/null\n" \
1230" will be run. BusyBox init does nothing with utmp. We don't need no\n" \
1231" stinkin' utmp.\n" \
1232"\n" \
1233" <runlevels>:\n" \
1234"\n" \
1235" The runlevels field is completely ignored.\n" \
1236"\n" \
1237" <action>:\n" \
1238"\n" \
1239" Valid actions include: sysinit, respawn, askfirst, wait,\n" \
1240" once, restart, ctrlaltdel, and shutdown.\n" \
1241"\n" \
1242" The available actions can be classified into two groups: actions\n" \
1243" that are run only once, and actions that are re-run when the specified\n" \
1244" process exits.\n" \
1245"\n" \
1246" Run only-once actions:\n" \
1247"\n" \
1248" 'sysinit' is the first item run on boot. init waits until all\n" \
1249" sysinit actions are completed before continuing. Following the\n" \
1250" completion of all sysinit actions, all 'wait' actions are run.\n" \
1251" 'wait' actions, like 'sysinit' actions, cause init to wait until\n" \
1252" the specified task completes. 'once' actions are asynchronous,\n" \
1253" therefore, init does not wait for them to complete. 'restart' is\n" \
1254" the action taken to restart the init process. By default this should\n" \
1255" simply run /sbin/init, but can be a script which runs pivot_root or it\n" \
1256" can do all sorts of other interesting things. The 'ctrlaltdel' init\n" \
1257" actions are run when the system detects that someone on the system\n" \
1258" console has pressed the CTRL-ALT-DEL key combination. Typically one\n" \
1259" wants to run 'reboot' at this point to cause the system to reboot.\n" \
1260" Finally the 'shutdown' action specifies the actions to taken when\n" \
1261" init is told to reboot. Unmounting filesystems and disabling swap\n" \
1262" is a very good here\n" \
1263"\n" \
1264" Run repeatedly actions:\n" \
1265"\n" \
1266" 'respawn' actions are run after the 'once' actions. When a process\n" \
1267" started with a 'respawn' action exits, init automatically restarts\n" \
1268" it. Unlike sysvinit, BusyBox init does not stop processes from\n" \
1269" respawning out of control. The 'askfirst' actions acts just like\n" \
1270" respawn, except that before running the specified process it\n" \
1271" displays the line "Please press Enter to activate this console."\n" \
1272" and then waits for the user to press enter before starting the\n" \
1273" specified process.\n" \
1274"\n" \
1275" Unrecognized actions (like initdefault) will cause init to emit an\n" \
1276" error message, and then go along with its business. All actions are\n" \
1277" run in the order they appear in /etc/inittab.\n" \
1278"\n" \
1279" <process>:\n" \
1280"\n" \
1281" Specifies the process to be executed and its command line.\n" \
1282"\n" \
1283"Example /etc/inittab file:\n" \
1284"\n" \
1285" # This is run first except when booting in single-user mode.\n" \
1286" #\n" \
1287" ::sysinit:/etc/init.d/rcS\n" \
1288" \n" \
1289" # /bin/sh invocations on selected ttys\n" \
1290" #\n" \
1291" # Start an "askfirst" shell on the console (whatever that may be)\n" \
1292" ::askfirst:-/bin/sh\n" \
1293" # Start an "askfirst" shell on /dev/tty2-4\n" \
1294" tty2::askfirst:-/bin/sh\n" \
1295" tty3::askfirst:-/bin/sh\n" \
1296" tty4::askfirst:-/bin/sh\n" \
1297" \n" \
1298" # /sbin/getty invocations for selected ttys\n" \
1299" #\n" \
1300" tty4::respawn:/sbin/getty 38400 tty4\n" \
1301" tty5::respawn:/sbin/getty 38400 tty5\n" \
1302" \n" \
1303" \n" \
1304" # Example of how to put a getty on a serial line (for a terminal)\n" \
1305" #\n" \
1306" #::respawn:/sbin/getty -L ttyS0 9600 vt100\n" \
1307" #::respawn:/sbin/getty -L ttyS1 9600 vt100\n" \
1308" #\n" \
1309" # Example how to put a getty on a modem line.\n" \
1310" #::respawn:/sbin/getty 57600 ttyS2\n" \
1311" \n" \
1312" # Stuff to do when restarting the init process\n" \
1313" ::restart:/sbin/init\n" \
1314" \n" \
1315" # Stuff to do before rebooting\n" \
1316" ::ctrlaltdel:/sbin/reboot\n" \
1317" ::shutdown:/bin/umount -a -r\n" \
1318" ::shutdown:/sbin/swapoff -a\n"
1319
1320#ifdef CONFIG_FEATURE_INSMOD_LOAD_MAP
1321 #define USAGE_INSMOD_MAP(a) a
1322#else
1323 #define USAGE_INSMOD_MAP(a)
1324#endif
1325#define insmod_trivial_usage \
1326 "[OPTION]... MODULE [symbol=value]..."
1327#define insmod_full_usage \
1328 "Loads the specified kernel modules into the kernel.\n\n" \
1329 "Options:\n" \
1330 "\t-f\tForce module to load into the wrong kernel version.\n" \
1331 "\t-k\tMake module autoclean-able.\n" \
1332 "\t-v\tverbose output\n" \
1333 "\t-q\tquiet output\n" \
1334 "\t-L\tLock to prevent simultaneous loads of a module\n" \
1335 USAGE_INSMOD_MAP("\t-m\tOutput load map to stdout\n") \
1336 "\t-o NAME\tSet internal module name to NAME\n" \
1337 "\t-x\tdo not export externs"
1338
1339#define install_trivial_usage \
1340 "[-cgmops] [sources] <dest|directory>"
1341#define install_full_usage \
1342 "Copies files and set attributes\n\n" \
1343 "Options:\n" \
1344 "\t-c\tcopy the file, default\n" \
1345 "\t-d\tcreate directories\n" \
1346 "\t-g\tset group ownership\n" \
1347 "\t-m\tset permission modes\n" \
1348 "\t-o\tset ownership\n" \
1349 "\t-p\tpreserve date\n" \
1350 "\t-s\tstrip symbol tables"
1351
1352
1353#define install_initd_trivial_usage \
1354 ""
1355#define install_initd_full_usage \
1356 "LSB install_initd init system."
1357#define install_initd_example_usage \
1358 "$ install_initd start\n"
1359
1360
1361#define ip_trivial_usage \
1362 "[ OPTIONS ] { address | link | route | tunnel } { COMMAND | help }"
1363#define ip_full_usage \
1364 "ip [ OPTIONS ] OBJECT { COMMAND | help }\n" \
1365 "where OBJECT := { link | addr | route | tunnel }\n" \
1366 "OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }"
1367
1368#define ipaddr_trivial_usage \
1369 "{ {add|del} IFADDR dev STRING | {show|flush}\n" \
1370 "\t\t[ dev STRING ] [ to PREFIX ] }"
1371#define ipaddr_full_usage \
1372 "ipaddr {add|del} IFADDR dev STRING\n" \
1373 "ipaddr {show|flush} [ dev STRING ] [ scope SCOPE-ID ]\n" \
1374 "\t\t\t[ to PREFIX ] [ label PATTERN ]\n" \
1375 "\t\t\tIFADDR := PREFIX | ADDR peer PREFIX\n" \
1376 "\t\t\t[ broadcast ADDR ] [ anycast ADDR ]\n" \
1377 "\t\t\t[ label STRING ] [ scope SCOPE-ID ]\n" \
1378 "\t\t\tSCOPE-ID := [ host | link | global | NUMBER ]"
1379
1380#ifdef CONFIG_FEATURE_IPCALC_FANCY
1381 #define XUSAGE_IPCALC_FANCY(a) a
1382#else
1383 #define XUSAGE_IPCALC_FANCY(a)
1384#endif
1385#define ipcalc_trivial_usage \
1386 "[OPTION]... <ADDRESS>[[/]<NETMASK>] [NETMASK]"
1387#define ipcalc_full_usage \
1388 "Calculate IP network settings from a IP address\n\n" \
1389 "Options:\n" \
1390 "\t-b\t--broadcast\tDisplay calculated broadcast address.\n" \
1391 "\t-n\t--network\tDisplay calculated network address.\n" \
1392 "\t-m\t--netmask\tDisplay default netmask for IP." \
1393 XUSAGE_IPCALC_FANCY(\
1394 "\n\t-p\t--prefix\tDisplay the prefix for IP/NETMASK." \
1395 "\t-h\t--hostname\tDisplay first resolved host name.\n" \
1396 "\t-s\t--silent\tDon't ever display error messages.")
1397
1398#define iplink_trivial_usage \
1399 "{ set DEVICE { up | down | arp { on | off } | show [ DEVICE ] }"
1400#define iplink_full_usage \
1401 "iplink set DEVICE { up | down | arp { on | off } |\n" \
1402 "\t\t\tdynamic { on | off } |\n" \
1403 "\t\t\tmtu MTU }\n" \
1404 "\tiplink show [ DEVICE ]"
1405
1406#define iproute_trivial_usage \
1407 "{ list | flush | { add | del | change | append |\n" \
1408 "\t\treplace | monitor } ROUTE }"
1409#define iproute_full_usage \
1410 "iproute { list | flush } SELECTOR\n" \
1411 "iproute get ADDRESS [ from ADDRESS iif STRING ]\n" \
1412 "\t\t\t[ oif STRING ] [ tos TOS ]\n" \
1413 "\tiproute { add | del | change | append | replace | monitor } ROUTE\n" \
1414 "\t\t\tSELECTOR := [ root PREFIX ] [ match PREFIX ] [ proto RTPROTO ]\n" \
1415 "\t\t\tROUTE := [ TYPE ] PREFIX [ tos TOS ] [ proto RTPROTO ]"
1416
1417#define iptunnel_trivial_usage \
1418 "{ add | change | del | show } [ NAME ]\n" \
1419 "\t\t[ mode { ipip | gre | sit } ]\n" \
1420 "\t\t[ remote ADDR ] [ local ADDR ] [ ttl TTL ]"
1421#define iptunnel_full_usage \
1422 "iptunnel { add | change | del | show } [ NAME ]\n" \
1423 "\t\t\t[ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]\n" \
1424 "\t\t\t[ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n" \
1425 "\t\t\t[ ttl TTL ] [ tos TOS ] [ [no]pmtudisc ] [ dev PHYS_DEV ]"
1426
1427#define kill_trivial_usage \
1428 "[-signal] process-id [process-id ...]"
1429#define kill_full_usage \
1430 "Send a signal (default is SIGTERM) to the specified process(es).\n\n"\
1431 "Options:\n" \
1432 "\t-l\tList all signal names and numbers."
1433#define kill_example_usage \
1434 "$ ps | grep apache\n" \
1435 "252 root root S [apache]\n" \
1436 "263 www-data www-data S [apache]\n" \
1437 "264 www-data www-data S [apache]\n" \
1438 "265 www-data www-data S [apache]\n" \
1439 "266 www-data www-data S [apache]\n" \
1440 "267 www-data www-data S [apache]\n" \
1441 "$ kill 252\n"
1442
1443#define killall_trivial_usage \
1444 "[-q] [-signal] process-name [process-name ...]"
1445#define killall_full_usage \
1446 "Send a signal (default is SIGTERM) to the specified process(es).\n\n"\
1447 "Options:\n" \
1448 "\t-l\tList all signal names and numbers.\n"\
1449 "\t-q\tDo not complain if no processes were killed."
1450#define killall_example_usage \
1451 "$ killall apache\n"
1452
1453#define killproc_trivial_usage \
1454 ""
1455#define killproc_full_usage \
1456 "LSB killproc."
1457#define killproc_example_usage \
1458 "$ killproc 5\n"
1459
1460
1461#define klogd_trivial_usage \
1462 "[-c n] [-n]"
1463#define klogd_full_usage \
1464 "Kernel logger.\n"\
1465 "Options:\n"\
1466 "\t-c n\tSets the default log level of console messages to n.\n"\
1467 "\t-n\tRun as a foreground process."
1468
1469#define length_trivial_usage \
1470 "STRING"
1471#define length_full_usage \
1472 "Prints out the length of the specified STRING."
1473#define length_example_usage \
1474 "$ length Hello\n" \
1475 "5\n"
1476
1477#define linuxrc_trivial_usage \
1478 ""
1479#define linuxrc_full_usage \
1480 "linuxrc pre boot."
1481#define linuxrc_example_usage \
1482 "$ linuxrc\n"
1483
1484
1485#define ln_trivial_usage \
1486 "[OPTION] TARGET... LINK_NAME|DIRECTORY"
1487#define ln_full_usage \
1488 "Create a link named LINK_NAME or DIRECTORY to the specified TARGET\n"\
1489 "\nYou may use '--' to indicate that all following arguments are non-options.\n\n" \
1490 "Options:\n" \
1491 "\t-s\tmake symbolic links instead of hard links\n" \
1492 "\t-f\tremove existing destination files\n" \
1493 "\t-n\tno dereference symlinks - treat like normal file"
1494#define ln_example_usage \
1495 "$ ln -s BusyBox /tmp/ls\n" \
1496 "$ ls -l /tmp/ls\n" \
1497 "lrwxrwxrwx 1 root root 7 Apr 12 18:39 ls -> BusyBox*\n"
1498
1499#define loadfont_trivial_usage \
1500 "< font"
1501#define loadfont_full_usage \
1502 "Loads a console font from standard input."
1503#define loadfont_example_usage \
1504 "$ loadfont < /etc/i18n/fontname\n"
1505
1506#define loadkmap_trivial_usage \
1507 "< keymap"
1508#define loadkmap_full_usage \
1509 "Loads a binary keyboard translation table from standard input."
1510#define loadkmap_example_usage \
1511 "$ loadkmap < /etc/i18n/lang-keymap\n"
1512
1513#define local_fs_trivial_usage \
1514 ""
1515#define local_fs_full_usage \
1516 "LSB local_fs init system."
1517#define local_fs_example_usage \
1518 "$ local_fs start\n"
1519
1520
1521#define log_failure_msg_trivial_usage \
1522 ""
1523#define log_failure_msg_full_usage \
1524 "LSB log_failure_msg."
1525#define log_failure_msg_example_usage \
1526 "$ log_failure_msg ""\n"
1527
1528
1529#define log_success_msg_trivial_usage \
1530 ""
1531#define log_success_msg_full_usage \
1532 "LSB log_success_msg."
1533#define log_success_msg_example_usage \
1534 "$ log_success_msg ""\n"
1535
1536
1537#define log_warning_msg_trivial_usage \
1538 ""
1539#define log_warning_msg_full_usage \
1540 "LSB log_warning_msg."
1541#define log_warning_msg_example_usage \
1542 "$ log_warning_msg ""\n"
1543
1544
1545#define logger_trivial_usage \
1546 "[OPTION]... [MESSAGE]"
1547#define logger_full_usage \
1548 "Write MESSAGE to the system log. If MESSAGE is omitted, log stdin.\n\n" \
1549 "Options:\n" \
1550 "\t-s\tLog to stderr as well as the system log.\n" \
1551 "\t-t TAG\tLog using the specified tag (defaults to user name).\n" \
1552 "\t-p PRIORITY\tEnter the message with the specified priority.\n" \
1553 "\t\tThis may be numerical or a ``facility.level'' pair."
1554#define logger_example_usage \
1555 "$ logger "hello"\n"
1556
1557#define login_trivial_usage \
1558 "[OPTION]... [username] [ENV=VAR ...]"
1559#define login_full_usage \
1560 "Begin a new session on the system\n\n" \
1561 "Options:\n" \
1562 "\t-f\tDo not authenticate (user already authenticated)\n" \
1563 "\t-h\tName of the remote host for this login.\n" \
1564 "\t-p\tPreserve environment."
1565
1566#define logname_trivial_usage \
1567 ""
1568#define logname_full_usage \
1569 "Print the name of the current user."
1570#define logname_example_usage \
1571 "$ logname\n" \
1572 "root\n"
1573
1574#define logread_trivial_usage \
1575 "[OPTION]..."
1576#define logread_full_usage \
1577 "Shows the messages from syslogd (using circular buffer).\n\n" \
1578 "Options:\n" \
1579 "\t-f\t\toutput data as the log grows"
1580
1581#define losetup_trivial_usage \
1582 "[OPTION]... LOOPDEVICE FILE\n" \
1583 "or: losetup [OPTION]... -d LOOPDEVICE"
1584#define losetup_full_usage \
1585 "Associate LOOPDEVICE with FILE.\n\n" \
1586 "Options:\n" \
1587 "\t-d\t\tDisassociate LOOPDEVICE.\n" \
1588 "\t-o OFFSET\tStart OFFSET bytes into FILE."
1589
1590#ifdef CONFIG_FEATURE_LS_TIMESTAMPS
1591 #define USAGE_LS_TIMESTAMPS(a) a
1592#else
1593 #define USAGE_LS_TIMESTAMPS(a)
1594#endif
1595#ifdef CONFIG_FEATURE_LS_FILETYPES
1596 #define USAGE_LS_FILETYPES(a) a
1597#else
1598 #define USAGE_LS_FILETYPES(a)
1599#endif
1600#ifdef CONFIG_FEATURE_LS_FOLLOWLINKS
1601 #define USAGE_LS_FOLLOWLINKS(a) a
1602#else
1603 #define USAGE_LS_FOLLOWLINKS(a)
1604#endif
1605#ifdef CONFIG_FEATURE_LS_RECURSIVE
1606 #define USAGE_LS_RECURSIVE(a) a
1607#else
1608 #define USAGE_LS_RECURSIVE(a)
1609#endif
1610#ifdef CONFIG_FEATURE_LS_SORTFILES
1611 #define USAGE_LS_SORTFILES(a) a
1612#else
1613 #define USAGE_LS_SORTFILES(a)
1614#endif
1615#ifdef CONFIG_FEATURE_AUTOWIDTH
1616 #define USAGE_AUTOWIDTH(a) a
1617#else
1618 #define USAGE_AUTOWIDTH(a)
1619#endif
1620
1621#define ls_trivial_usage \
1622 "[-1Aa" USAGE_LS_TIMESTAMPS("c") "Cd" USAGE_LS_TIMESTAMPS("e") USAGE_LS_FILETYPES("F") "iln" USAGE_LS_FILETYPES("p") USAGE_LS_FOLLOWLINKS("L") USAGE_LS_RECURSIVE("R") USAGE_LS_SORTFILES("rS") "s" USAGE_AUTOWIDTH("T") USAGE_LS_TIMESTAMPS("tu") USAGE_LS_SORTFILES("v") USAGE_AUTOWIDTH("w") "x" USAGE_LS_SORTFILES("X") USAGE_HUMAN_READABLE("h") USAGE_NOT_HUMAN_READABLE("") "k" USAGE_SELINUX("K") "] [filenames...]"
1623#define ls_full_usage \
1624 "List directory contents\n\n" \
1625 "Options:\n" \
1626 "\t-1\tlist files in a single column\n" \
1627 "\t-A\tdo not list implied . and ..\n" \
1628 "\t-a\tdo not hide entries starting with .\n" \
1629 "\t-C\tlist entries by columns\n" \
1630 USAGE_LS_TIMESTAMPS("\t-c\twith -l: show ctime\n") \
1631 "\t-d\tlist directory entries instead of contents\n" \
1632 USAGE_LS_TIMESTAMPS("\t-e\tlist both full date and full time\n") \
1633 USAGE_LS_FILETYPES("\t-F\tappend indicator (one of */=@|) to entries\n") \
1634 "\t-i\tlist the i-node for each file\n" \
1635 "\t-l\tuse a long listing format\n" \
1636 "\t-n\tlist numeric UIDs and GIDs instead of names\n" \
1637 USAGE_LS_FILETYPES("\t-p\tappend indicator (one of /=@|) to entries\n") \
1638 USAGE_LS_FOLLOWLINKS("\t-L\tlist entries pointed to by symbolic links\n") \
1639 USAGE_LS_RECURSIVE("\t-R\tlist subdirectories recursively\n") \
1640 USAGE_LS_SORTFILES("\t-r\tsort the listing in reverse order\n") \
1641 USAGE_LS_SORTFILES("\t-S\tsort the listing by file size\n") \
1642 "\t-s\tlist the size of each file, in blocks\n" \
1643 USAGE_AUTOWIDTH("\t-T NUM\tassume Tabstop every NUM columns\n") \
1644 USAGE_LS_TIMESTAMPS("\t-t\twith -l: show modification time\n") \
1645 USAGE_LS_TIMESTAMPS("\t-u\twith -l: show access time\n") \
1646 USAGE_LS_SORTFILES("\t-v\tsort the listing by version\n") \
1647 USAGE_AUTOWIDTH("\t-w NUM\tassume the terminal is NUM columns wide\n") \
1648 "\t-x\tlist entries by lines instead of by columns\n" \
1649 USAGE_LS_SORTFILES("\t-X\tsort the listing by extension\n") \
1650 USAGE_HUMAN_READABLE( \
1651 "\t-h\tprint sizes in human readable format (e.g., 1K 243M 2G )\n") \
1652 USAGE_SELINUX("\t-k\tprint security context\n") \
1653 USAGE_SELINUX("\t-K\tprint security context in long format\n")
1654
1655#define lsmod_trivial_usage \
1656 ""
1657#define lsmod_full_usage \
1658 "List the currently loaded kernel modules."
1659
1660#define makedevs_trivial_usage \
1661 "NAME TYPE MAJOR MINOR FIRST LAST [s]"
1662#define makedevs_full_usage \
1663 "Creates a range of block or character special files\n\n" \
1664 "TYPEs include:\n" \
1665 "\tb:\tMake a block (buffered) device.\n" \
1666 "\tc or u:\tMake a character (un-buffered) device.\n" \
1667 "\tp:\tMake a named pipe. MAJOR and MINOR are ignored for named pipes.\n\n" \
1668 "FIRST specifies the number appended to NAME to create the first device.\n" \
1669 "LAST specifies the number of the last item that should be created.\n" \
1670 "If 's' is the last argument, the base device is created as well.\n\n" \
1671 "For example:\n" \
1672 "\tmakedevs /dev/ttyS c 4 66 2 63 -> ttyS2-ttyS63\n" \
1673 "\tmakedevs /dev/hda b 3 0 0 8 s -> hda,hda1-hda8"
1674#define makedevs_example_usage \
1675 "# makedevs /dev/ttyS c 4 66 2 63\n" \
1676 "[creates ttyS2-ttyS63]\n" \
1677 "# makedevs /dev/hda b 3 0 0 8 s\n" \
1678 "[creates hda,hda1-hda8]\n"
1679
1680#define man_trivial_usage \
1681 "[NAME]"
1682#define man_full_usage \
1683 "Show documentation for Trinux software."
1684#define man_example_usage \
1685 "$ man basics\n"
1686
1687
1688#ifdef CONFIG_FEATURE_MD5_SHA1_SUM_CHECK
1689#define USAGE_MD5_SHA1_SUM_CHECK(a) a
1690#else
1691#define USAGE_MD5_SHA1_SUM_CHECK(a)
1692#endif
1693
1694#define md5sum_trivial_usage \
1695 "[OPTION] [FILEs...]" \
1696 USAGE_MD5_SHA1_SUM_CHECK("\n or: md5sum [OPTION] -c [FILE]")
1697#define md5sum_full_usage \
1698 "Print" USAGE_MD5_SHA1_SUM_CHECK(" or check") " MD5 checksums.\n\n" \
1699 "Options:\n" \
1700 "With no FILE, or when FILE is -, read standard input." \
1701 USAGE_MD5_SHA1_SUM_CHECK("\n\n" \
1702 "\t-c\tcheck MD5 sums against given list\n" \
1703 "\nThe following two options are useful only when verifying checksums:\n" \
1704 "\t-s\tdon't output anything, status code shows success\n" \
1705 "\t-w\twarn about improperly formated MD5 checksum lines")
1706#define md5sum_example_usage \
1707 "$ md5sum < busybox\n" \
1708 "6fd11e98b98a58f64ff3398d7b324003\n" \
1709 "$ md5sum busybox\n" \
1710 "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \
1711 "$ md5sum -c -\n" \
1712 "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \
1713 "busybox: OK\n" \
1714 "^D\n"
1715
1716#define mesg_trivial_usage \
1717 "[y|n]"
1718#define mesg_full_usage \
1719 "mesg controls write access to your terminal\n" \
1720 "\ty\tAllow write access to your terminal.\n" \
1721 "\tn\tDisallow write access to your terminal.\n"
1722
1723#define mkdir_trivial_usage \
1724 "[OPTION] DIRECTORY..."
1725#define mkdir_full_usage \
1726 "Create the DIRECTORY(ies) if they do not already exist\n\n" \
1727 "Options:\n" \
1728 "\t-m\tset permission mode (as in chmod), not rwxrwxrwx - umask\n" \
1729 "\t-p\tno error if existing, make parent directories as needed"
1730#define mkdir_example_usage \
1731 "$ mkdir /tmp/foo\n" \
1732 "$ mkdir /tmp/foo\n" \
1733 "/tmp/foo: File exists\n" \
1734 "$ mkdir /tmp/foo/bar/baz\n" \
1735 "/tmp/foo/bar/baz: No such file or directory\n" \
1736 "$ mkdir -p /tmp/foo/bar/baz\n"
1737
1738#define mkfifo_trivial_usage \
1739 "[OPTIONS] name"
1740#define mkfifo_full_usage \
1741 "Creates a named pipe (identical to 'mknod name p')\n\n" \
1742 "Options:\n" \
1743 "\t-m\tcreate the pipe using the specified mode (default a=rw)"
1744
1745#define mkfs_minix_trivial_usage \
1746 "[-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]"
1747#define mkfs_minix_full_usage \
1748 "Make a MINIX filesystem.\n\n" \
1749 "Options:\n" \
1750 "\t-c\t\tCheck the device for bad blocks\n" \
1751 "\t-n [14|30]\tSpecify the maximum length of filenames\n" \
1752 "\t-i INODES\tSpecify the number of inodes for the filesystem\n" \
1753 "\t-l FILENAME\tRead the bad blocks list from FILENAME\n" \
1754 "\t-v\t\tMake a Minix version 2 filesystem"
1755
1756#define mknod_trivial_usage \
1757 "[OPTIONS] NAME TYPE MAJOR MINOR"
1758#define mknod_full_usage \
1759 "Create a special file (block, character, or pipe).\n\n" \
1760 "Options:\n" \
1761 "\t-m\tcreate the special file using the specified mode (default a=rw)\n\n" \
1762 "TYPEs include:\n" \
1763 "\tb:\tMake a block (buffered) device.\n" \
1764 "\tc or u:\tMake a character (un-buffered) device.\n" \
1765 "\tp:\tMake a named pipe. MAJOR and MINOR are ignored for named pipes."
1766#define mknod_example_usage \
1767 "$ mknod /dev/fd0 b 2 0\n" \
1768 "$ mknod -m 644 /tmp/pipe p\n"
1769
1770#define mkswap_trivial_usage \
1771 "[-c] [-v0|-v1] device [block-count]"
1772#define mkswap_full_usage \
1773 "Prepare a disk partition to be used as a swap partition.\n\n" \
1774 "Options:\n" \
1775 "\t-c\t\tCheck for read-ability.\n" \
1776 "\t-v0\t\tMake version 0 swap [max 128 Megs].\n" \
1777 "\t-v1\t\tMake version 1 swap [big!] (default for kernels >\n\t\t\t2.1.117).\n" \
1778 "\tblock-count\tNumber of block to use (default is entire partition)."
1779
1780#define mktemp_trivial_usage \
1781 "[-dq] TEMPLATE"
1782#define mktemp_full_usage \
1783 "Creates a temporary file with its name based on TEMPLATE.\n" \
1784 "TEMPLATE is any name with six `Xs' (i.e., /tmp/temp.XXXXXX).\n\n" \
1785 "Options:\n" \
1786 "\t-d\t\tMake a directory instead of a file\n" \
1787 "\t-q\t\tFail silently if an error occurs"
1788#define mktemp_example_usage \
1789 "$ mktemp /tmp/temp.XXXXXX\n" \
1790 "/tmp/temp.mWiLjM\n" \
1791 "$ ls -la /tmp/temp.mWiLjM\n" \
1792 "-rw------- 1 andersen andersen 0 Apr 25 17:10 /tmp/temp.mWiLjM\n"
1793
1794#define modprobe_trivial_usage \
1795 "[-knqrsv] [MODULE ...]"
1796#define modprobe_full_usage \
1797 "Used for high level module loading and unloading.\n\n" \
1798 "Options:\n" \
1799 "\t-k\tMake module autoclean-able.\n" \
1800 "\t-n\tJust show what would be done.\n" \
1801 "\t-q\tQuiet output.\n" \
1802 "\t-r\tRemove module (stacks) or do autoclean.\n" \
1803 "\t-s\tReport via syslog instead of stderr.\n" \
1804 "\t-v\tVerbose output."
1805#define modprobe_example_usage \
1806 "$ modprobe cdrom\n"
1807
1808#define more_trivial_usage \
1809 "[FILE ...]"
1810#define more_full_usage \
1811 "More is a filter for viewing FILE one screenful at a time."
1812#define more_example_usage \
1813 "$ dmesg | more\n"
1814
1815#ifdef CONFIG_FEATURE_MOUNT_LOOP
1816 #define USAGE_MOUNT_LOOP(a) a
1817#else
1818 #define USAGE_MOUNT_LOOP(a)
1819#endif
1820#ifdef CONFIG_FEATURE_MTAB_SUPPORT
1821 #define USAGE_MTAB(a) a
1822#else
1823 #define USAGE_MTAB(a)
1824#endif
1825#define mount_trivial_usage \
1826 "[flags] DEVICE NODE [-o options,more-options]"
1827#define mount_full_usage \
1828 "Mount a filesystem. Autodetection of filesystem type requires the\n" \
1829 "/proc filesystem be already mounted.\n\n" \
1830 "Flags:\n" \
1831 "\t-a:\t\tMount all filesystems in fstab.\n" \
1832 USAGE_MTAB( \
1833 "\t-f:\t\t\"Fake\" Add entry to mount table but don't mount it.\n" \
1834 "\t-n:\t\tDon't write a mount table entry.\n" \
1835 ) \
1836 "\t-o option:\tOne of many filesystem options, listed below.\n" \
1837 "\t-r:\t\tMount the filesystem read-only.\n" \
1838 "\t-t fs-type:\tSpecify the filesystem type.\n" \
1839 "\t-w:\t\tMount for reading and writing (default).\n" \
1840 "\n" \
1841 "Options for use with the \"-o\" flag:\n" \
1842 "\tasync/sync:\tWrites are asynchronous / synchronous.\n" \
1843 "\tatime/noatime:\tEnable / disable updates to inode access times.\n" \
1844 "\tdev/nodev:\tAllow use of special device files / disallow them.\n" \
1845 "\texec/noexec:\tAllow use of executable files / disallow them.\n" \
1846 USAGE_MOUNT_LOOP( \
1847 "\tloop:\t\tMounts a file via loop device.\n" \
1848 ) \
1849 "\tsuid/nosuid:\tAllow set-user-id-root programs / disallow them.\n" \
1850 "\tremount:\tRe-mount a mounted filesystem, changing its flags.\n" \
1851 "\tro/rw:\t\tMount for read-only / read-write.\n" \
1852 "\tbind:\t\tUse the linux 2.4.x \"bind\" feature.\n" \
1853 "\nThere are EVEN MORE flags that are specific to each filesystem.\n" \
1854 "You'll have to see the written documentation for those filesystems."
1855#define mount_example_usage \
1856 "$ mount\n" \
1857 "/dev/hda3 on / type minix (rw)\n" \
1858 "proc on /proc type proc (rw)\n" \
1859 "devpts on /dev/pts type devpts (rw)\n" \
1860 "$ mount /dev/fd0 /mnt -t msdos -o ro\n" \
1861 "$ mount /tmp/diskimage /opt -t ext2 -o loop\n"
1862
1863#define mt_trivial_usage \
1864 "[-f device] opcode value"
1865#define mt_full_usage \
1866 "Control magnetic tape drive operation\n" \
1867 "\nAvailable Opcodes:\n\n" \
1868 "bsf bsfm bsr bss datacompression drvbuffer eof eom erase\n" \
1869 "fsf fsfm fsr fss load lock mkpart nop offline ras1 ras2\n" \
1870 "ras3 reset retension rewind rewoffline seek setblk setdensity\n" \
1871 "setpart tell unload unlock weof wset"
1872
1873#define mv_trivial_usage \
1874 "[OPTION]... SOURCE DEST\n" \
1875 "or: mv [OPTION]... SOURCE... DIRECTORY"
1876#define mv_full_usage \
1877 "Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY.\n\n" \
1878 "Options:\n" \
1879 "\t-f\tdon't prompt before overwriting\n" \
1880 "\t-i\tinteractive, prompt before overwrite"
1881#define mv_example_usage \
1882 "$ mv /tmp/foo /bin/bar\n"
1883
1884#define nameif_trivial_usage \
1885 "[-s] [-c FILE] [{IFNAME MACADDR}]"
1886#define nameif_full_usage \
1887 "Nameif renaming network interface while it in the down state.\n\n" \
1888 "Options:\n" \
1889 "\t-c FILE\t\tUse configuration file (default is /etc/mactab)\n" \
1890 "\t-s\t\tUse syslog (LOCAL0 facility).\n" \
1891 "\tIFNAME MACADDR\tnew_interface_name interface_mac_address"
1892#define nameif_example_usage \
1893 "$ nameif -s dmz0 00:A0:C9:8C:F6:3F\n" \
1894 " or\n" \
1895 "$ nameif -c /etc/my_mactab_file\n" \
1896
1897#define nc_trivial_usage \
1898 "[OPTIONS] [IP] [port]"
1899#define nc_full_usage \
1900 "Netcat opens a pipe to IP:port\n\n" \
1901 "Options:\n" \
1902 "\t-l\t\tlisten mode, for inbound connects\n" \
1903 "\t-p PORT\t\tlocal port number\n" \
1904 "\t-i SECS\t\tdelay interval for lines sent\n" \
1905 "\t-e PROG\t\tprogram to exec after connect (dangerous!)"
1906#define nc_example_usage \
1907 "$ nc foobar.somedomain.com 25\n" \
1908 "220 foobar ESMTP Exim 3.12 #1 Sat, 15 Apr 2000 00:03:02 -0600\n" \
1909 "help\n" \
1910 "214-Commands supported:\n" \
1911 "214- HELO EHLO MAIL RCPT DATA AUTH\n" \
1912 "214 NOOP QUIT RSET HELP\n" \
1913 "quit\n" \
1914 "221 foobar closing connection\n"
1915
1916#define netstat_trivial_usage \
1917 "[-laenrtuwx]"
1918#define netstat_full_usage \
1919 "Netstat displays Linux networking information.\n\n" \
1920 "Options:\n" \
1921 "\t-l display listening server sockets\n" \
1922 "\t-a display all sockets (default: connected)\n" \
1923 "\t-e display other/more information\n" \
1924 "\t-n don't resolve names\n" \
1925 "\t-r display routing table\n" \
1926 "\t-t tcp sockets\n" \
1927 "\t-u udp sockets\n" \
1928 "\t-w raw sockets\n" \
1929 "\t-x unix sockets"
1930
1931
1932#define network_trivial_usage \
1933 ""
1934#define network_full_usage \
1935 "LSB network init system."
1936#define network_example_usage \
1937 "$ network start\n"
1938
1939
1940#define nslookup_trivial_usage \
1941 "[HOST] [SERVER]"
1942#define nslookup_full_usage \
1943 "Queries the nameserver for the IP address of the given HOST\n" \
1944 "optionally using a specified DNS server"
1945#define nslookup_example_usage \
1946 "$ nslookup localhost\n" \
1947 "Server: default\n" \
1948 "Address: default\n" \
1949 "\n" \
1950 "Name: debian\n" \
1951 "Address: 127.0.0.1\n"
1952
1953#define od_trivial_usage \
1954 "[-aBbcDdeFfHhIiLlOovXx] [FILE]"
1955#define od_full_usage \
1956 "Write an unambiguous representation, octal bytes by default, of FILE\n"\
1957 "to standard output. With no FILE, or when FILE is -, read standard input."
1958
1959#define openvt_trivial_usage \
1960 "<vtnum> <COMMAND> [ARGS...]"
1961#define openvt_full_usage \
1962 "Start a command on a new virtual terminal"
1963#define openvt_example_usage \
1964 "openvt 2 /bin/ash\n"
1965
1966#ifdef CONFIG_FEATURE_SHA1_PASSWORDS
1967 #define PASSWORD_ALG_TYPES(a) a
1968#else
1969 #define PASSWORD_ALG_TYPES(a)
1970#endif
1971#define passwd_trivial_usage \
1972 "[OPTION] [name]"
1973#define passwd_full_usage \
1974 "Change a user password. If no name is specified,\n" \
1975 "changes the password for the current user.\n" \
1976 "Options:\n" \
1977 "\t-a\tDefine which algorithm shall be used for the password.\n" \
1978 "\t\t\t(Choices: des, md5" \
1979 PASSWORD_ALG_TYPES(", sha1") \
1980 ")\n\t-d\tDelete the password for the specified user account.\n" \
1981 "\t-l\tLocks (disables) the specified user account.\n" \
1982 "\t-u\tUnlocks (re-enables) the specified user account."
1983
1984#define patch_trivial_usage \
1985 "[-p<num>]"
1986#define patch_full_usage \
1987 "[-p<num>]"
1988#define patch_example_usage \
1989 "$ patch -p1 <example.diff"
1990
1991#define pidof_trivial_usage \
1992 "process-name [OPTION] [process-name ...]"
1993#define pidof_full_usage \
1994 "Lists the PIDs of all processes with names that match the\n" \
1995 "names on the command line.\n" \
1996 "Options:\n" \
1997 "\t-s\t\tdisplay only a single PID."
1998#define pidof_example_usage \
1999 "$ pidof init\n" \
2000 "1\n"
2001
2002#define pidofproc_trivial_usage \
2003 ""
2004#define pidofproc_full_usage \
2005 "LSB pidofproc."
2006#define pidofproc_example_usage \
2007 "$ pidofproc 5\n"
2008
2009
2010#ifndef CONFIG_FEATURE_FANCY_PING
2011#define ping_trivial_usage "host"
2012#define ping_full_usage "Send ICMP ECHO_REQUEST packets to network hosts"
2013#else
2014#define ping_trivial_usage \
2015 "[OPTION]... host"
2016#define ping_full_usage \
2017 "Send ICMP ECHO_REQUEST packets to network hosts.\n\n" \
2018 "Options:\n" \
2019 "\t-c COUNT\tSend only COUNT pings.\n" \
2020 "\t-s SIZE\t\tSend SIZE data bytes in packets (default=56).\n" \
2021 "\t-q\t\tQuiet mode, only displays output at start\n" \
2022 "\t\t\tand when finished."
2023#endif
2024#define ping_example_usage \
2025 "$ ping localhost\n" \
2026 "PING slag (127.0.0.1): 56 data bytes\n" \
2027 "64 bytes from 127.0.0.1: icmp_seq=0 ttl=255 time=20.1 ms\n" \
2028 "\n" \
2029 "--- debian ping statistics ---\n" \
2030 "1 packets transmitted, 1 packets received, 0% packet loss\n" \
2031 "round-trip min/avg/max = 20.1/20.1/20.1 ms\n"
2032
2033#ifndef CONFIG_FEATURE_FANCY_PING6
2034#define ping6_trivial_usage "host"
2035#define ping6_full_usage "Send ICMP ECHO_REQUEST packets to network hosts"
2036#else
2037#define ping6_trivial_usage \
2038 "[OPTION]... host"
2039#define ping6_full_usage \
2040 "Send ICMP ECHO_REQUEST packets to network hosts.\n\n" \
2041 "Options:\n" \
2042 "\t-c COUNT\tSend only COUNT pings.\n" \
2043 "\t-s SIZE\t\tSend SIZE data bytes in packets (default=56).\n" \
2044 "\t-q\t\tQuiet mode, only displays output at start\n" \
2045 "\t\t\tand when finished."
2046#endif
2047#define ping6_example_usage \
2048 "$ ping6 ip6-localhost\n" \
2049 "PING ip6-localhost (::1): 56 data bytes\n" \
2050 "64 bytes from ::1: icmp6_seq=0 ttl=64 time=20.1 ms\n" \
2051 "\n" \
2052 "--- ip6-localhost ping statistics ---\n" \
2053 "1 packets transmitted, 1 packets received, 0% packet loss\n" \
2054 "round-trip min/avg/max = 20.1/20.1/20.1 ms\n"
2055
2056#define pivot_root_trivial_usage \
2057 "NEW_ROOT PUT_OLD"
2058#define pivot_root_full_usage \
2059 "Move the current root file system to PUT_OLD and make NEW_ROOT\n" \
2060 "the new root file system."
2061
2062#define poweroff_trivial_usage \
2063 "[-d<delay>]"
2064#define poweroff_full_usage \
2065 "Halt the system and request that the kernel shut off the power.\n" \
2066 "Options:\n" \
2067 "\t-d\t\tdelay interval for shutting off."
2068
2069#define printf_trivial_usage \
2070 "FORMAT [ARGUMENT...]"
2071#define printf_full_usage \
2072 "Formats and prints ARGUMENT(s) according to FORMAT,\n" \
2073 "Where FORMAT controls the output exactly as in C printf."
2074#define printf_example_usage \
2075 "$ printf "Val=%d\\n" 5\n" \
2076 "Val=5\n"
2077
2078#ifdef CONFIG_SELINUX
2079#define USAGE_NONSELINUX(a)
2080#else
2081#define USAGE_NONSELINUX(a) a
2082#endif
2083
2084#define ps_trivial_usage \
2085 ""
2086#define ps_full_usage \
2087 "Report process status\n" \
2088 USAGE_NONSELINUX("\n\tThis version of ps accepts no options.") \
2089 USAGE_SELINUX("\nOptions:\n\t-c\tshow SE Linux context")
2090
2091#define ps_example_usage \
2092 "$ ps\n" \
2093 " PID Uid Gid State Command\n" \
2094 " 1 root root S init\n" \
2095 " 2 root root S [kflushd]\n" \
2096 " 3 root root S [kupdate]\n" \
2097 " 4 root root S [kpiod]\n" \
2098 " 5 root root S [kswapd]\n" \
2099 " 742 andersen andersen S [bash]\n" \
2100 " 743 andersen andersen S -bash\n" \
2101 " 745 root root S [getty]\n" \
2102 " 2990 andersen andersen R ps\n"
2103
2104#define pwd_trivial_usage \
2105 ""
2106#define pwd_full_usage \
2107 "Print the full filename of the current working directory."
2108#define pwd_example_usage \
2109 "$ pwd\n" \
2110 "/root\n"
2111
2112#define rc_trivial_usage \
2113 ""
2114#define rc_full_usage \
2115 "LSB rc init system."
2116#define rc_example_usage \
2117 "$ rc 5\n"
2118
2119
2120#define rcS_trivial_usage \
2121 ""
2122#define rcS_full_usage \
2123 "sysinit for inittab."
2124#define rcS_example_usage \
2125 "$ rcS\n"
2126
2127
2128#define rdate_trivial_usage \
2129 "[-sp] HOST"
2130#define rdate_full_usage \
2131 "Get and possibly set the system date and time from a remote HOST.\n\n" \
2132 "Options:\n" \
2133 "\t-s\tSet the system date and time (default).\n" \
2134 "\t-p\tPrint the date and time."
2135
2136#define readlink_trivial_usage \
2137 ""
2138#define readlink_full_usage \
2139 "Displays the value of a symbolic link."
2140
2141#define realpath_trivial_usage \
2142 "pathname ..."
2143#define realpath_full_usage \
2144 "Returns the absolute pathnames of given argument."
2145
2146#define reboot_trivial_usage \
2147 "[-d<delay>]"
2148#define reboot_full_usage \
2149 "Reboot the system.\n" \
2150 "Options:\n" \
2151 "\t-d\t\tdelay interval for rebooting."
2152
2153#define remote_fs_trivial_usage \
2154 ""
2155#define remote_fs_full_usage \
2156 "LSB remote_fs init system."
2157#define remote_fs_example_usage \
2158 "$ remote_fs start\n"
2159
2160
2161#define remove_initd_trivial_usage \
2162 ""
2163#define remove_initd_full_usage \
2164 "LSB remove_initd init system."
2165#define remove_initd_example_usage \
2166 "$ remove_initd start\n"
2167
2168
2169#define renice_trivial_usage \
2170 "priority pid [pid ...]"
2171#define renice_full_usage \
2172 "Changes priority of running processes. Allowed priorities range\n" \
2173 "from 20 (the process runs only when nothing else is running) to 0\n" \
2174 "(default priority) to -20 (almost nothing else ever gets to run)."
2175
2176#define reset_trivial_usage \
2177 ""
2178#define reset_full_usage \
2179 "Resets the screen."
2180
2181#define rm_trivial_usage \
2182 "[OPTION]... FILE..."
2183#define rm_full_usage \
2184 "Remove (unlink) the FILE(s). You may use '--' to\n" \
2185 "indicate that all following arguments are non-options.\n\n" \
2186 "Options:\n" \
2187 "\t-i\t\talways prompt before removing each destination\n" \
2188 "\t-f\t\tremove existing destinations, never prompt\n" \
2189 "\t-r or -R\tremove the contents of directories recursively"
2190#define rm_example_usage \
2191 "$ rm -rf /tmp/foo\n"
2192
2193#define rmdir_trivial_usage \
2194 "[OPTION]... DIRECTORY..."
2195#define rmdir_full_usage \
2196 "Remove the DIRECTORY(ies), if they are empty."
2197#define rmdir_example_usage \
2198 "# rmdir /tmp/foo\n"
2199
2200#define rmmod_trivial_usage \
2201 "[OPTION]... [MODULE]..."
2202#define rmmod_full_usage \
2203 "Unloads the specified kernel modules from the kernel.\n\n" \
2204 "Options:\n" \
2205 "\t-a\tRemove all unused modules (recursively)"
2206#define rmmod_example_usage \
2207 "$ rmmod tulip\n"
2208
2209#ifdef CONFIG_FEATURE_IPV6
2210 #define USAGE_ROUTE_IPV6(a) a
2211#else
2212 #define USAGE_ROUTE_IPV6(a) "\t"
2213#endif
2214
2215
2216#define route_trivial_usage \
2217 "[{add|del|delete}]"
2218#define route_full_usage \
2219 "Edit the kernel's routing tables.\n\n" \
2220 "Options:\n" \
2221 "\t-n\t\tDont resolve names.\n" \
2222 "\t-e\t\tDisplay other/more information.\n" \
2223 "\t-A inet" USAGE_ROUTE_IPV6("{6}") "\tSelect address family."
2224
2225#define rpm_trivial_usage \
2226 "-i -q[ildc]p package.rpm"
2227#define rpm_full_usage \
2228 "Manipulates RPM packages" \
2229 "\n\nOptions:" \
2230 "\n\t-i Install package" \
2231 "\n\t-q Query package" \
2232 "\n\t-p Query uninstalled package" \
2233 "\n\t-i Show information" \
2234 "\n\t-l List contents" \
2235 "\n\t-d List documents" \
2236 "\n\t-c List config files"
2237
2238#define rpm2cpio_trivial_usage \
2239 "package.rpm"
2240#define rpm2cpio_full_usage \
2241 "Outputs a cpio archive of the rpm file."
2242
2243#define run_parts_trivial_usage \
2244 "[-t] [-a ARG] [-u MASK] DIRECTORY"
2245#define run_parts_full_usage \
2246 "Run a bunch of scripts in a directory.\n\n" \
2247 "Options:\n" \
2248 "\t-t\tPrints what would be run, but does not actually run anything.\n" \
2249 "\t-a ARG\tPass ARG as an argument for every program invoked.\n" \
2250 "\t-u MASK\tSet the umask to MASK before executing every program."
2251
2252#define rx_trivial_usage \
2253 "FILE"
2254#define rx_full_usage \
2255 "Receive a file using the xmodem protocol."
2256#define rx_example_usage \
2257 "$ rx /tmp/foo\n"
2258
2259#define sed_trivial_usage \
2260 "[-efinr] pattern [files...]"
2261#define sed_full_usage \
2262 "Options:\n" \
2263 "\t-e script\tadd the script to the commands to be executed\n" \
2264 "\t-f scriptfile\tadd script-file contents to the\n" \
2265 "\t\t\tcommands to be executed\n" \
2266 "\t-i\t\tedit files in-place\n" \
2267 "\t-n\t\tsuppress automatic printing of pattern space\n" \
2268 "\t-r\t\tuse extended regular expression syntax\n" \
2269 "\n" \
2270 "If no -e or -f is given, the first non-option argument is taken as the sed\n"\
2271 "script to interpret. All remaining arguments are names of input files; if no\n"\
2272 "input files are specified, then the standard input is read. Source files\n" \
2273 "will not be modified unless -i option is given."
2274
2275#define sed_example_usage \
2276 "$ echo "foo" | sed -e 's/f[a-zA-Z]o/bar/g'\n" \
2277 "bar\n"
2278
2279#define seq_trivial_usage \
2280 "[first [increment]] last"
2281#define seq_full_usage \
2282 "Print numbers from FIRST to LAST, in steps of INCREMENT.\n" \
2283 "FIRST, INCREMENT default to 1\n" \
2284 "Arguments:\n" \
2285 "\tLAST\n" \
2286 "\tFIRST\tLAST\n" \
2287 "\tFIRST\tINCREMENT\tLAST"
2288
2289#define setkeycodes_trivial_usage \
2290 "SCANCODE KEYCODE ..."
2291#define setkeycodes_full_usage \
2292 "Set entries into the kernel's scancode-to-keycode map,\n" \
2293 "allowing unusual keyboards to generate usable keycodes.\n\n" \
2294 "SCANCODE may be either xx or e0xx (hexadecimal),\n" \
2295 "and KEYCODE is given in decimal"
2296#define setkeycodes_example_usage \
2297 "$ setkeycodes e030 127\n"
2298
2299#define lash_trivial_usage \
2300 "[FILE]...\n" \
2301 "or: sh -c command [args]..."
2302#define lash_full_usage \
2303 "The BusyBox LAme SHell (command interpreter)"
2304#define lash_notes_usage \
2305 "This command does not yet have proper documentation.\n\n" \
2306 "Use lash just as you would use any other shell. It properly handles pipes,\n" \
2307 "redirects, job control, can be used as the shell for scripts, and has a\n" \
2308 "sufficient set of builtins to do what is needed. It does not (yet) support\n" \
2309 "Bourne Shell syntax. If you need things like "if-then-else", "while", and such\n" \
2310 "use ash or bash. If you just need a very simple and extremely small shell,\n" \
2311 "this will do the job."
2312
2313#define last_trivial_usage \
2314 ""
2315#define last_full_usage \
2316 "Shows listing of the last users that logged into the system"
2317
2318#define sha1sum_trivial_usage \
2319 "[OPTION] [FILEs...]" \
2320 USAGE_MD5_SHA1_SUM_CHECK("\n or: sha1sum [OPTION] -c [FILE]")
2321#define sha1sum_full_usage \
2322 "Print" USAGE_MD5_SHA1_SUM_CHECK(" or check") " SHA1 checksums.\n\n" \
2323 "Options:\n" \
2324 "With no FILE, or when FILE is -, read standard input." \
2325 USAGE_MD5_SHA1_SUM_CHECK("\n\n" \
2326 "\t-c\tcheck SHA1 sums against given list\n" \
2327 "\nThe following two options are useful only when verifying checksums:\n" \
2328 "\t-s\tdon't output anything, status code shows success\n" \
2329 "\t-w\twarn about improperly formated SHA1 checksum lines")
2330
2331#ifdef CONFIG_FEATURE_FANCY_SLEEP
2332 #define USAGE_FANCY_SLEEP(a) a
2333 #define USAGE_NOT_FANCY_SLEEP(a)
2334#else
2335 #define USAGE_FANCY_SLEEP(a)
2336 #define USAGE_NOT_FANCY_SLEEP(a) a
2337#endif
2338
2339#define sleep_trivial_usage \
2340 USAGE_FANCY_SLEEP("[") "N" USAGE_FANCY_SLEEP("]...")
2341#define sleep_full_usage \
2342 USAGE_NOT_FANCY_SLEEP("Pause for N seconds.") \
2343 USAGE_FANCY_SLEEP( \
2344 "Pause for a time equal to the total of the args given, where each arg can\n" \
2345 "\t\thave an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays.")
2346#define sleep_example_usage \
2347 "$ sleep 2\n" \
2348 "[2 second delay results]\n" \
2349 USAGE_FANCY_SLEEP("$ sleep 1d 3h 22m 8s\n" \
2350 "[98528 second delay results]\n")
2351
2352#ifdef CONFIG_FEATURE_SORT_UNIQUE
2353 #define USAGE_SORT_UNIQUE(a) a
2354#else
2355 #define USAGE_SORT_UNIQUE(a)
2356#endif
2357#ifdef CONFIG_FEATURE_SORT_REVERSE
2358 #define USAGE_SORT_REVERSE(a) a
2359#else
2360 #define USAGE_SORT_REVERSE(a)
2361#endif
2362#define sort_trivial_usage \
2363 "[-n" USAGE_SORT_REVERSE("r") USAGE_SORT_UNIQUE("u") "] [FILE]..."
2364#define sort_full_usage \
2365 "Sorts lines of text in the specified files\n\n"\
2366 "Options:\n" \
2367 USAGE_SORT_UNIQUE("\t-u\tsuppress duplicate lines\n") \
2368 USAGE_SORT_REVERSE("\t-r\tsort in reverse order\n") \
2369 "\t-n\tsort numerics"
2370#define sort_example_usage \
2371 "$ echo -e \"e\\nf\\nb\\nd\\nc\\na\" | sort\n" \
2372 "a\n" \
2373 "b\n" \
2374 "c\n" \
2375 "d\n" \
2376 "e\n" \
2377 "f\n"
2378
2379#define start_daemon_trivial_usage \
2380 ""
2381#define start_daemon_full_usage \
2382 "LSB start_daemon."
2383#define start_daemon_example_usage \
2384 "$ start_daemon 5\n"
2385
2386
2387#define start_stop_daemon_trivial_usage \
2388 "[OPTIONS] [--start|--stop] ... [-- arguments...]\n"
2389#define start_stop_daemon_full_usage \
2390 "Program to start and stop services."\
2391 "\n\nOptions:"\
2392 "\n\t-S|--start\t\t\tstart"\
2393 "\n\t-K|--stop\t\t\tstop"\
2394 "\n\t-a|--startas <pathname>\t\tstarts process specified by pathname"\
2395 "\n\t-b|--background\t\t\tforce process into background"\
2396 "\n\t-u|--user <username>|<uid>\tstop this user's processes"\
2397 "\n\t-x|--exec <executable>\t\tprogram to either start or check"\
2398 "\n\t-m|--make-pidfile <filename>\tcreate the -p file and enter pid in it"\
2399 "\n\t-n|--name <process-name>\tstop processes with this name"\
2400 "\n\t-p|--pidfile <pid-file>\t\tsave or load pid using a pid-file"\
2401 "\n\t-q|--quiet\t\t\tbe quiet" \
2402 "\n\t-s|--signal <signal>\t\tsignal to send (default TERM)"
2403
2404#define strings_trivial_usage \
2405 "[-afo] [-n length] [file ... ]"
2406#define strings_full_usage \
2407 "Display printable strings in a binary file." \
2408 "\n\nOptions:" \
2409 "\n\t-a\tScan the whole files (this is the default)."\
2410 "\n\t-f\tPrecede each string with the name of the file where it was found." \
2411 "\n\t-n N\tSpecifies that at least N characters forms a sequence (default 4)" \
2412 "\n\t-o\tEach string is preceded by its decimal offset in the file."
2413
2414#define stty_trivial_usage \
2415 "[-a|g] [-F DEVICE] [SETTING]..."
2416#define stty_full_usage \
2417 "Without arguments, prints baud rate, line discipline," \
2418 "\nand deviations from stty sane." \
2419 "\n\nOptions:" \
2420 "\n\t-F DEVICE\topen device instead of stdin" \
2421 "\n\t-a\t\tprint all current settings in human-readable form" \
2422 "\n\t-g\t\tprint in stty-readable form" \
2423 "\n\t[SETTING]\tsee manpage"
2424
2425#define su_trivial_usage \
2426 "[OPTION]... [-] [username]"
2427#define su_full_usage \
2428 "Change user id or become root.\n" \
2429 "Options:\n" \
2430 "\t-p\tPreserve environment"
2431
2432#define sulogin_trivial_usage \
2433 "[OPTION]... [tty-device]"
2434#define sulogin_full_usage \
2435 "Single user login\n" \
2436 "Options:\n" \
2437 "\t-f\tDo not authenticate (user already authenticated)\n" \
2438 "\t-h\tName of the remote host for this login.\n" \
2439 "\t-p\tPreserve environment."
2440
2441#define swapoff_trivial_usage \
2442 "[OPTION] [DEVICE]"
2443#define swapoff_full_usage \
2444 "Stop swapping virtual memory pages on DEVICE.\n\n" \
2445 "Options:\n" \
2446 "\t-a\tStop swapping on all swap devices"
2447
2448#define swapon_trivial_usage \
2449 "[OPTION] [DEVICE]"
2450#define swapon_full_usage \
2451 "Start swapping virtual memory pages on DEVICE.\n\n" \
2452 "Options:\n" \
2453 "\t-a\tStart swapping on all swap devices"
2454
2455#define sync_trivial_usage \
2456 ""
2457#define sync_full_usage \
2458 "Write all buffered filesystem blocks to disk."
2459
2460
2461#ifdef CONFIG_FEATURE_ROTATE_LOGFILE
2462 #define USAGE_ROTATE_LOGFILE(a) a
2463#else
2464 #define USAGE_ROTATE_LOGFILE(a)
2465#endif
2466#ifdef CONFIG_FEATURE_REMOTE_LOG
2467 #define USAGE_REMOTE_LOG(a) a
2468#else
2469 #define USAGE_REMOTE_LOG(a)
2470#endif
2471#ifdef CONFIG_FEATURE_IPC_SYSLOG
2472 #define USAGE_IPC_LOG(a) a
2473#else
2474 #define USAGE_IPC_LOG(a)
2475#endif
2476
2477#ifdef CONFIG_SYSCTL
2478#define sysctl_trivial_usage \
2479 "[OPTIONS]... [VALUE]...\n"
2480#define sysctl_full_usage
2481 "sysctl - configure kernel parameters at runtime\n\n" \
2482 "Options:\n" \
2483 "\t-n\tUse this option to disable printing of the key name when printing values.\n" \
2484 "\t-w\tUse this option when you want to change a sysctl setting.\n" \
2485 "\t-p\tLoad in sysctl settings from the file specified or /etc/sysctl.conf if none given.\n" \
2486 "\t-a\tDisplay all values currently available.\n" \
2487 "\t-A\tDisplay all values currently available in table form."
2488#define sysctl_example_usage
2489 "sysctl [-n] variable ...\n" \
2490 "sysctl [-n] -w variable=value ...\n" \
2491 "sysctl [-n] -a\n" \
2492 "sysctl [-n] -p <file>\t(default /etc/sysctl.conf)\n" \
2493 "sysctl [-n] -A\n"
2494#endif
2495
2496#define syslogd_trivial_usage \
2497 "[OPTION]..."
2498#define syslogd_full_usage \
2499 "Linux system and kernel logging utility.\n" \
2500 "Note that this version of syslogd ignores /etc/syslog.conf.\n\n" \
2501 "Options:\n" \
2502 "\t-m MIN\t\tMinutes between MARK lines (default=20, 0=off)\n" \
2503 "\t-n\t\tRun as a foreground process\n" \
2504 "\t-O FILE\t\tUse an alternate log file (default=/var/log/messages)\n" \
2505 "\t-S\t\tMake logging output smaller." \
2506 USAGE_ROTATE_LOGFILE( \
2507 "\n\t-s SIZE\t\tMax size (KB) before rotate (default=200KB, 0=off)\n" \
2508 "\t-b NUM\t\tNumber of rotated logs to keep (default=1, max=99, 0=purge)") \
2509 USAGE_REMOTE_LOG( \
2510 "\n\t-R HOST[:PORT]\tLog to IP or hostname on PORT (default PORT=514/UDP)\n" \
2511 "\t-L\t\tLog locally and via network logging (default is network only)") \
2512 USAGE_IPC_LOG( \
2513 "\n\t-C [size(KiB)]\tLog to a circular buffer (read the buffer using logread)")
2514#define syslogd_example_usage \
2515 "$ syslogd -R masterlog:514\n" \
2516 "$ syslogd -R 192.168.1.1:601\n"
2517
2518
2519#ifndef CONFIG_FEATURE_FANCY_TAIL
2520 #define USAGE_UNSIMPLE_TAIL(a)
2521#else
2522 #define USAGE_UNSIMPLE_TAIL(a) a
2523#endif
2524#define tail_trivial_usage \
2525 "[OPTION]... [FILE]..."
2526#define tail_full_usage \
2527 "Print last 10 lines of each FILE to standard output.\n" \
2528 "With more than one FILE, precede each with a header giving the\n" \
2529 "file name. With no FILE, or when FILE is -, read standard input.\n\n" \
2530 "Options:\n" \
2531 USAGE_UNSIMPLE_TAIL("\t-c N[kbm]\toutput the last N bytes\n") \
2532 "\t-n N[kbm]\tprint last N lines instead of last 10\n" \
2533 "\t-f\t\toutput data as the file grows" \
2534 USAGE_UNSIMPLE_TAIL( "\n\t-q\t\tnever output headers giving file names\n" \
2535 "\t-s SEC\t\twait SEC seconds between reads with -f\n" \
2536 "\t-v\t\talways output headers giving file names\n\n" \
2537 "If the first character of N (bytes or lines) is a '+', output begins with \n" \
2538 "the Nth item from the start of each file, otherwise, print the last N items\n" \
2539 "in the file. N bytes may be suffixed by k (x1024), b (x512), or m (1024^2)." )
2540#define tail_example_usage \
2541 "$ tail -n 1 /etc/resolv.conf\n" \
2542 "nameserver 10.0.0.1\n"
2543
2544#ifdef CONFIG_FEATURE_TAR_CREATE
2545 #define USAGE_TAR_CREATE(a) a
2546#else
2547 #define USAGE_TAR_CREATE(a)
2548#endif
2549#ifdef CONFIG_FEATURE_TAR_EXCLUDE
2550 #define USAGE_TAR_EXCLUDE(a) a
2551#else
2552 #define USAGE_TAR_EXCLUDE(a)
2553#endif
2554#ifdef CONFIG_FEATURE_TAR_GZIP
2555 #define USAGE_TAR_GZIP(a) a
2556#else
2557 #define USAGE_TAR_GZIP(a)
2558#endif
2559#ifdef CONFIG_FEATURE_TAR_BZIP2
2560 #define USAGE_TAR_BZIP2(a) a
2561#else
2562 #define USAGE_TAR_BZIP2(a)
2563#endif
2564#ifdef CONFIG_FEATURE_TAR_COMPRESS
2565 #define USAGE_TAR_COMPRESS(a) a
2566#else
2567 #define USAGE_TAR_COMPRESS(a)
2568#endif
2569
2570#define tar_trivial_usage \
2571 "-[" USAGE_TAR_CREATE("c") USAGE_TAR_GZIP("z") USAGE_TAR_BZIP2("j") USAGE_TAR_COMPRESS("Z") "xtvO] " \
2572 USAGE_TAR_EXCLUDE("[-X FILE]") \
2573 "[-f TARFILE] [-C DIR] [FILE(s)] ..."
2574#define tar_full_usage \
2575 "Create, extract, or list files from a tar file.\n\n" \
2576 "Options:\n" \
2577 USAGE_TAR_CREATE("\tc\t\tcreate\n") \
2578 "\tx\t\textract\n" \
2579 "\tt\t\tlist\n" \
2580 "\nArchive format selection:\n" \
2581 USAGE_TAR_GZIP("\tz\t\tFilter the archive through gzip\n") \
2582 USAGE_TAR_BZIP2("\tj\t\tFilter the archive through bzip2\n") \
2583 USAGE_TAR_COMPRESS("\tZ\t\tFilter the archive through compress\n") \
2584 "\nFile selection:\n" \
2585 "\tf\t\tname of TARFILE or \"-\" for stdin\n" \
2586 "\tO\t\textract to stdout\n" \
2587 USAGE_TAR_EXCLUDE( \
2588 "\texclude\t\tfile to exclude\n" \
2589 "\tX\t\tfile with names to exclude\n" \
2590 ) \
2591 "\tC\t\tchange to directory DIR before operation\n" \
2592 "\tv\t\tverbosely list files processed"
2593#define tar_example_usage \
2594 "$ zcat /tmp/tarball.tar.gz | tar -xf -\n" \
2595 "$ tar -cf /tmp/tarball.tar /usr/local\n"
2596
2597#define tee_trivial_usage \
2598 "[OPTION]... [FILE]..."
2599#define tee_full_usage \
2600 "Copy standard input to each FILE, and also to standard output.\n\n" \
2601 "Options:\n" \
2602 "\t-a\tappend to the given FILEs, do not overwrite\n" \
2603 "\t-i\tignore interrupt signals (SIGINT)"
2604#define tee_example_usage \
2605 "$ echo "Hello" | tee /tmp/foo\n" \
2606 "$ cat /tmp/foo\n" \
2607 "Hello\n"
2608
2609#ifdef CONFIG_FEATURE_TELNET_AUTOLOGIN
2610#define telnet_trivial_usage \
2611 "[-a] [-l USER] HOST [PORT]"
2612#define telnet_full_usage \
2613 "Telnet is used to establish interactive communication with another\n" \
2614 "computer over a network using the TELNET protocol.\n\n" \
2615 "Options:\n" \
2616 "\t-a\t\tAttempt an automatic login with the USER variable.\n" \
2617 "\t-l USER\t\tAttempt an automatic login with the USER argument.\n" \
2618 "\tHOST\t\tThe official name, alias or the IP address of the\n" \
2619 "\t\t\tremote host.\n" \
2620 "\tPORT\t\tThe remote port number to connect to. If it is not\n" \
2621 "\t\t\tspecified, the default telnet (23) port is used."
2622#else
2623#define telnet_trivial_usage \
2624 "HOST [PORT]"
2625#define telnet_full_usage \
2626 "Telnet is used to establish interactive communication with another\n"\
2627 "computer over a network using the TELNET protocol."
2628#endif
2629
2630#ifdef CONFIG_FEATURE_TELNETD_INETD
2631#define telnetd_trivial_usage \
2632 "(inetd mode) [OPTION]"
2633#define telnetd_full_usage \
2634 "Telnetd uses incoming TELNET connections via inetd.\n"\
2635 "Options:\n" \
2636 "\t-l LOGIN\texec LOGIN on connect (default /bin/sh)\n" \
2637 "\t-f issue_file\tDisplay issue_file instead of /etc/issue."
2638#else
2639#define telnetd_trivial_usage \
2640 "[OPTION]"
2641#define telnetd_full_usage \
2642 "Telnetd listens for incoming TELNET connections on PORT.\n"\
2643 "Options:\n" \
2644 "\t-p PORT\tlisten for connections on PORT (default 23)\n"\
2645 "\t-l LOGIN\texec LOGIN on connect (default /bin/sh)\n"\
2646 "\t-f issue_file\tDisplay issue_file instead of /etc/issue."
2647#endif
2648
2649#define test_trivial_usage \
2650 "EXPRESSION\n or [ EXPRESSION ]"
2651#define test_full_usage \
2652 "Checks file types and compares values returning an exit\n" \
2653 "code determined by the value of EXPRESSION."
2654#define test_example_usage \
2655 "$ test 1 -eq 2\n" \
2656 "$ echo $?\n" \
2657 "1\n" \
2658 "$ test 1 -eq 1\n" \
2659 "$ echo $?\n" \
2660 "0\n" \
2661 "$ [ -d /etc ]\n" \
2662 "$ echo $?\n" \
2663 "0\n" \
2664 "$ [ -d /junk ]\n" \
2665 "$ echo $?\n" \
2666 "1\n"
2667
2668#ifdef CONFIG_FEATURE_TFTP_GET
2669 #define USAGE_TFTP_GET(a) a
2670#else
2671 #define USAGE_TFTP_GET(a)
2672#endif
2673#ifdef CONFIG_FEATURE_TFTP_PUT
2674 #define USAGE_TFTP_PUT(a) a
2675#else
2676 #define USAGE_TFTP_PUT(a)
2677#endif
2678#ifdef CONFIG_FEATURE_TFTP_BLOCKSIZE
2679 #define USAGE_TFTP_BS(a) a
2680#else
2681 #define USAGE_TFTP_BS(a)
2682#endif
2683
2684#define tftp_trivial_usage \
2685 "[OPTION]... HOST [PORT]"
2686#define tftp_full_usage \
2687 "Transfers a file from/to a tftp server using \"octet\" mode.\n\n" \
2688 "Options:\n" \
2689 "\t-l FILE\tLocal FILE.\n" \
2690 "\t-r FILE\tRemote FILE." \
2691 USAGE_TFTP_GET( \
2692 "\n\t-g\tGet file." \
2693 ) \
2694 USAGE_TFTP_PUT( \
2695 "\n\t-p\tPut file." \
2696 ) \
2697 USAGE_TFTP_BS( \
2698 "\n\t-b SIZE\tTransfer blocks of SIZE octets." \
2699 )
2700#define time_trivial_usage \
2701 "[OPTION]... COMMAND [ARGS...]"
2702#define time_full_usage \
2703 "Runs the program COMMAND with arguments ARGS. When COMMAND finishes,\n" \
2704 "COMMAND's resource usage information is displayed\n\n" \
2705 "Options:\n" \
2706 "\t-v\tDisplays verbose resource usage information."
2707
2708#define top_trivial_usage \
2709 "[-d <seconds>]"
2710#define top_full_usage \
2711 "top provides an view of processor activity in real time.\n" \
2712 "This utility reads the status for all processes in /proc each <seconds>\n" \
2713 "and shows the status for however many processes will fit on the screen.\n" \
2714 "This utility will not show processes that are started after program startup,\n" \
2715 "but it will show the EXIT status for and PIDs that exit while it is running."
2716
2717#define touch_trivial_usage \
2718 "[-c] FILE [FILE ...]"
2719#define touch_full_usage \
2720 "Update the last-modified date on the given FILE[s].\n\n" \
2721 "Options:\n" \
2722 "\t-c\tDo not create any files"
2723#define touch_example_usage \
2724 "$ ls -l /tmp/foo\n" \
2725 "/bin/ls: /tmp/foo: No such file or directory\n" \
2726 "$ touch /tmp/foo\n" \
2727 "$ ls -l /tmp/foo\n" \
2728 "-rw-rw-r-- 1 andersen andersen 0 Apr 15 01:11 /tmp/foo\n"
2729
2730#define tr_trivial_usage \
2731 "[-cds] STRING1 [STRING2]"
2732#define tr_full_usage \
2733 "Translate, squeeze, and/or delete characters from\n" \
2734 "standard input, writing to standard output.\n\n" \
2735 "Options:\n" \
2736 "\t-c\ttake complement of STRING1\n" \
2737 "\t-d\tdelete input characters coded STRING1\n" \
2738 "\t-s\tsqueeze multiple output characters of STRING2 into one character"
2739#define tr_example_usage \
2740 "$ echo "gdkkn vnqkc" | tr [a-y] [b-z]\n" \
2741 "hello world\n"
2742
2743#define traceroute_trivial_usage \
2744 "[-dnrv] [-m max_ttl] [-p port#] [-q nqueries]\n"\
2745 "\t[-s src_addr] [-t tos] [-w wait] host [data size]"
2746#define traceroute_full_usage \
2747 "trace the route ip packets follow going to \"host\"\n" \
2748 "Options:\n" \
2749 "\t-d\tset SO_DEBUG options to socket\n" \
2750 "\t-n\tPrint hop addresses numerically rather than symbolically\n" \
2751 "\t-r\tBypass the normal routing tables and send directly to a host\n" \
2752 "\t-v\tVerbose output\n" \
2753 "\t-m max_ttl\tSet the max time-to-live (max number of hops)\n" \
2754 "\t-p port#\tSet the base UDP port number used in probes\n" \
2755 "\t\t(default is 33434)\n" \
2756 "\t-q nqueries\tSet the number of probes per ``ttl'' to nqueries\n" \
2757 "\t\t(default is 3)\n" \
2758 "\t-s src_addr\tUse the following IP address as the source address\n" \
2759 "\t-t tos\tSet the type-of-service in probe packets to the following value\n" \
2760 "\t\t(default 0)\n" \
2761 "\t-w wait\tSet the time (in seconds) to wait for a response to a probe\n" \
2762 "\t\t(default 3 sec.)."
2763
2764
2765#define true_trivial_usage \
2766 ""
2767#define true_full_usage \
2768 "Return an exit code of TRUE (0)."
2769#define true_example_usage \
2770 "$ true\n" \
2771 "$ echo $?\n" \
2772 "0\n"
2773
2774#define tty_trivial_usage \
2775 ""
2776#define tty_full_usage \
2777 "Print the file name of the terminal connected to standard input.\n\n"\
2778 "Options:\n" \
2779 "\t-s\tprint nothing, only return an exit status"
2780#define tty_example_usage \
2781 "$ tty\n" \
2782 "/dev/tty2\n"
2783
2784#define udhcpc_trivial_usage \
2785 "[-fbnqv] [-c CLIENTID] [-H HOSTNAME] [-i INTERFACE]\n[-p pidfile] [-r IP] [-s script]"
2786#define udhcpc_full_usage \
2787 "\t-c,\t--clientid=CLIENTID\tClient identifier\n" \
2788 "\t-H,\t--hostname=HOSTNAME\tClient hostname\n" \
2789 "\t-h,\t \tAlias for -H\n" \
2790 "\t-f,\t--foreground\tDo not fork after getting lease\n" \
2791 "\t-b,\t--background\tFork to background if lease cannot be immediately negotiated.\n" \
2792 "\t-i,\t--interface=INTERFACE\tInterface to use (default: eth0)\n" \
2793 "\t-n,\t--now\tExit with failure if lease cannot be immediately negotiated.\n" \
2794 "\t-p,\t--pidfile=file\tStore process ID of daemon in file\n" \
2795 "\t-q,\t--quit\tQuit after obtaining lease\n" \
2796 "\t-r,\t--request=IP\tIP address to request (default: none)\n" \
2797 "\t-s,\t--script=file\tRun file at dhcp events (default: /usr/share/udhcpc/default.script)\n" \
2798 "\t-v,\t--version\tDisplay version"
2799
2800#define udhcpc_script_trivial_usage \
2801 "[ACTION]"
2802#define udhcpc_script_full_usage \
2803 "Should only be called by udhcpc."
2804
2805#define udhcpd_trivial_usage \
2806 "[configfile]\n" \
2807
2808#define udhcpd_full_usage \
2809 ""
2810
2811#ifdef CONFIG_FEATURE_MOUNT_FORCE
2812 #define USAGE_MOUNT_FORCE(a) a
2813#else
2814 #define USAGE_MOUNT_FORCE(a)
2815#endif
2816#define umount_trivial_usage \
2817 "[flags] FILESYSTEM|DIRECTORY"
2818#define umount_full_usage \
2819 "Unmount file systems\n" \
2820 "\nFlags:\n" "\t-a\tUnmount all file systems" \
2821 USAGE_MTAB(" in /etc/mtab\n\t-n\tDon't erase /etc/mtab entries") \
2822 "\n\t-r\tTry to remount devices as read-only if mount is busy" \
2823 USAGE_MOUNT_FORCE("\n\t-f\tForce umount (i.e., unreachable NFS server)") \
2824 USAGE_MOUNT_LOOP("\n\t-l\tDo not free loop device (if a loop device has been used)")
2825#define umount_example_usage \
2826 "$ umount /dev/hdc1 \n"
2827
2828#define uname_trivial_usage \
2829 "[OPTION]..."
2830#define uname_full_usage \
2831 "Print certain system information. With no OPTION, same as -s.\n\n" \
2832 "Options:\n" \
2833 "\t-a\tprint all information\n" \
2834 "\t-m\tthe machine (hardware) type\n" \
2835 "\t-n\tprint the machine's network node hostname\n" \
2836 "\t-r\tprint the operating system release\n" \
2837 "\t-s\tprint the operating system name\n" \
2838 "\t-p\tprint the host processor type\n" \
2839 "\t-v\tprint the operating system version"
2840#define uname_example_usage \
2841 "$ uname -a\n" \
2842 "Linux debian 2.4.23 #2 Tue Dec 23 17:09:10 MST 2003 i686 GNU/Linux\n"
2843
2844#define uncompress_trivial_usage \
2845 "[-c] [-f] [ name ... ]"
2846#define uncompress_full_usage \
2847 "Uncompress .Z file[s]\n" \
2848 "Options:\n" \
2849 "\t-c\textract to stdout\n" \
2850 "\t-f\tforce overwrite an existing file"
2851
2852#define uniq_trivial_usage \
2853 "[OPTION]... [INPUT [OUTPUT]]"
2854#define uniq_full_usage \
2855 "Discard all but one of successive identical lines from INPUT\n" \
2856 "(or standard input), writing to OUTPUT (or standard output).\n\n" \
2857 "Options:\n" \
2858 "\t-c\tprefix lines by the number of occurrences\n" \
2859 "\t-d\tonly print duplicate lines\n" \
2860 "\t-u\tonly print unique lines\n" \
2861 "\t-f N\tskip the first N fields\n" \
2862 "\t-s N\tskip the first N chars (after any skipped fields)"
2863#define uniq_example_usage \
2864 "$ echo -e \"a\\na\\nb\\nc\\nc\\na\" | sort | uniq\n" \
2865 "a\n" \
2866 "b\n" \
2867 "c\n"
2868
2869#define unix2dos_trivial_usage \
2870 "[option] [FILE]"
2871#define unix2dos_full_usage \
2872 "Converts FILE from unix format to dos format. When no option\n" \
2873 "is given, the input is converted to the opposite output format.\n" \
2874 "When no file is given, uses stdin for input and stdout for output.\n" \
2875 "Options:\n" \
2876 "\t-u\toutput will be in UNIX format\n" \
2877 "\t-d\toutput will be in DOS format"
2878
2879#define unzip_trivial_usage \
2880 "[-opts[modifiers]] file[.zip] [list] [-x xlist] [-d exdir]"
2881#define unzip_full_usage \
2882 "Extracts files from ZIP archives.\n\n" \
2883 "Options:\n" \
2884 "\t-l\tlist archive contents (short form)\n" \
2885 "\t-n\tnever overwrite existing files (default)\n" \
2886 "\t-o\toverwrite files without prompting\n" \
2887 "\t-p\tsend output to stdout\n" \
2888 "\t-q\tbe quiet\n" \
2889 "\t-x\texclude these files\n" \
2890 "\t-d\textract files into this directory"
2891
2892#define uptime_trivial_usage \
2893 ""
2894#define uptime_full_usage \
2895 "Display the time since the last boot."
2896#define uptime_example_usage \
2897 "$ uptime\n" \
2898 " 1:55pm up 2:30, load average: 0.09, 0.04, 0.00\n"
2899
2900#define usleep_trivial_usage \
2901 "N"
2902#define usleep_full_usage \
2903 "Pause for N microseconds."
2904#define usleep_example_usage \
2905 "$ usleep 1000000\n" \
2906 "[pauses for 1 second]\n"
2907
2908#define uudecode_trivial_usage \
2909 "[FILE]..."
2910#define uudecode_full_usage \
2911 "Uudecode a file that is uuencoded.\n\n" \
2912 "Options:\n" \
2913 "\t-o FILE\tdirect output to FILE"
2914#define uudecode_example_usage \
2915 "$ uudecode -o busybox busybox.uu\n" \
2916 "$ ls -l busybox\n" \
2917 "-rwxr-xr-x 1 ams ams 245264 Jun 7 21:35 busybox\n"
2918
2919#define uuencode_trivial_usage \
2920 "[OPTION] [INFILE] REMOTEFILE"
2921#define uuencode_full_usage \
2922 "Uuencode a file.\n\n" \
2923 "Options:\n" \
2924 "\t-m\tuse base64 encoding per RFC1521"
2925#define uuencode_example_usage \
2926 "$ uuencode busybox busybox\n" \
2927 "begin 755 busybox\n" \
2928 "<encoded file snipped>\n" \
2929 "$ uudecode busybox busybox > busybox.uu\n" \
2930 "$\n"
2931
2932#define vconfig_trivial_usage \
2933 "COMMAND [OPTIONS] ..."
2934#define vconfig_full_usage \
2935 "vconfig lets you create and remove virtual ethernet devices.\n\n" \
2936 "Options:\n" \
2937 "\tadd [interface-name] [vlan_id]\n" \
2938 "\trem [vlan-name]\n" \
2939 "\tset_flag [interface-name] [flag-num] [0 | 1]\n" \
2940 "\tset_egress_map [vlan-name] [skb_priority] [vlan_qos]\n" \
2941 "\tset_ingress_map [vlan-name] [skb_priority] [vlan_qos]\n" \
2942 "\tset_name_type [name-type]"
2943
2944#define vi_trivial_usage \
2945 "[OPTION] [FILE]..."
2946#define vi_full_usage \
2947 "edit FILE.\n\n" \
2948 "Options:\n" \
2949 "\t-R\tRead-only- do not write to the file."
2950
2951#define vlock_trivial_usage \
2952 "[OPTIONS]"
2953#define vlock_full_usage \
2954 "Lock a virtual terminal. A password is required to unlock\n" \
2955 "Options:\n" \
2956 "\t-a\tLock all VTs"
2957
2958#define watch_trivial_usage \
2959 "[-n <seconds>] COMMAND..."
2960#define watch_full_usage \
2961 "Executes a program periodically.\n" \
2962 "Options:\n" \
2963 "\t-n\tLoop period in seconds - default is 2."
2964#define watch_example_usage \
2965 "$ watch date\n" \
2966 "Mon Dec 17 10:31:40 GMT 2000\n" \
2967 "Mon Dec 17 10:31:42 GMT 2000\n" \
2968 "Mon Dec 17 10:31:44 GMT 2000"
2969
2970#define watchdog_trivial_usage \
2971 "[-t <seconds>] DEV"
2972#define watchdog_full_usage \
2973 "Periodically write to watchdog device DEV.\n" \
2974 "Options:\n" \
2975 "\t-t\tTimer period in seconds - default is 30."
2976
2977#define wc_trivial_usage \
2978 "[OPTION]... [FILE]..."
2979#define wc_full_usage \
2980 "Print line, word, and byte counts for each FILE, and a total line if\n" \
2981 "more than one FILE is specified. With no FILE, read standard input.\n\n" \
2982 "Options:\n" \
2983 "\t-c\tprint the byte counts\n" \
2984 "\t-l\tprint the newline counts\n" \
2985 "\t-L\tprint the length of the longest line\n" \
2986 "\t-w\tprint the word counts"
2987#define wc_example_usage \
2988 "$ wc /etc/passwd\n" \
2989 " 31 46 1365 /etc/passwd\n"
2990
2991#define wget_trivial_usage \
2992 "[-c|--continue] [-q|--quiet] [-O|--output-document file]\n" \
2993 "\t\t[--header 'header: value'] [-Y|--proxy on/off] [-P DIR] url"
2994#define wget_full_usage \
2995 "wget retrieves files via HTTP or FTP\n\n" \
2996 "Options:\n" \
2997 "\t-c\tcontinue retrieval of aborted transfers\n" \
2998 "\t-q\tquiet mode - do not print\n" \
2999 "\t-P\tSet directory prefix to DIR\n" \
3000 "\t-O\tsave to filename ('-' for stdout)\n" \
3001 "\t-Y\tuse proxy ('on' or 'off')"
3002
3003#define which_trivial_usage \
3004 "[COMMAND ...]"
3005#define which_full_usage \
3006 "Locates a COMMAND."
3007#define which_example_usage \
3008 "$ which login\n" \
3009 "/bin/login\n"
3010
3011#define who_trivial_usage \
3012 " "
3013#define who_full_usage \
3014 "Prints the current user names and related information"
3015
3016#define whoami_trivial_usage \
3017 ""
3018#define whoami_full_usage \
3019 "Prints the user name associated with the current effective user id."
3020
3021#ifdef CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION
3022#define USAGE_XARGS_CONFIRMATION(a) a
3023#else
3024#define USAGE_XARGS_CONFIRMATION(a)
3025#endif
3026#ifdef CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT
3027#define USAGE_XARGS_TERMOPT(a) a
3028#else
3029#define USAGE_XARGS_TERMOPT(a)
3030#endif
3031#ifdef CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM
3032#define USAGE_XARGS_ZERO_TERM(a) a
3033#else
3034#define USAGE_XARGS_ZERO_TERM(a)
3035#endif
3036
3037
3038#define xargs_trivial_usage \
3039 "[COMMAND] [OPTIONS] [ARGS...]"
3040#define xargs_full_usage \
3041 "Executes COMMAND on every item given by standard input.\n\n" \
3042 "Options:\n" \
3043 USAGE_XARGS_CONFIRMATION("\t-p\tPrompt the user about whether to run each command\n") \
3044 "\t-r\tDo not run command for empty readed lines\n" \
3045 USAGE_XARGS_TERMOPT("\t-x\tExit if the size is exceeded\n") \
3046 USAGE_XARGS_ZERO_TERM("\t-0\tInput filenames are terminated by a null character\n") \
3047 "\t-t\tPrint the command line on stderr before executing it."
3048#define xargs_example_usage \
3049 "$ ls | xargs gzip\n" \
3050 "$ find . -name '*.c' -print | xargs rm\n"
3051
3052#define yes_trivial_usage \
3053 "[OPTION]... [STRING]..."
3054#define yes_full_usage \
3055 "Repeatedly outputs a line with all specified STRING(s), or 'y'."
3056
3057#define zcat_trivial_usage \
3058 "FILE"
3059#define zcat_full_usage \
3060 "Uncompress to stdout."
3061
3062#endif /* __BB_USAGE_H__ */
3063
3064
3065
3066
3067
3068
3069
3070
3071
3072
3073
3074
3075
3076
3077
generated by cgit v1.1 at 2024-05-20 09:07:22 +0000