summaryrefslogtreecommitdiffstats
path: root/CVSROOT
diff options
context:
space:
mode:
authorroot2005-03-11 18:11:30 +0000
committerroot2005-03-11 18:11:30 +0000
commit68c983fca8336e31e52b872b540a67604c1b26a3 (patch)
tree78bc12b4b986b50e59a5a4be94b58195261acb2e /CVSROOT
downloadurunlevel-68c983fca8336e31e52b872b540a67604c1b26a3.zip
urunlevel-68c983fca8336e31e52b872b540a67604c1b26a3.tar.gz
urunlevel-68c983fca8336e31e52b872b540a67604c1b26a3.tar.bz2
urunlevel-68c983fca8336e31e52b872b540a67604c1b26a3.tar.xz
initial checkin
Diffstat (limited to 'CVSROOT')
-rw-r--r--CVSROOT/checkoutlist13
-rw-r--r--CVSROOT/commitinfo15
-rw-r--r--CVSROOT/config21
-rw-r--r--CVSROOT/cvswrappers19
-rw-r--r--CVSROOT/editinfo21
-rw-r--r--CVSROOT/loginfo27
-rw-r--r--CVSROOT/modules26
-rw-r--r--CVSROOT/notify12
-rw-r--r--CVSROOT/rcsinfo13
-rw-r--r--CVSROOT/taginfo20
-rw-r--r--CVSROOT/verifymsg21
11 files changed, 208 insertions, 0 deletions
diff --git a/CVSROOT/checkoutlist b/CVSROOT/checkoutlist
new file mode 100644
index 0000000..2921bff
--- /dev/null
+++ b/CVSROOT/checkoutlist
@@ -0,0 +1,13 @@
1# The "checkoutlist" file is used to support additional version controlled
2# administrative files in $CVSROOT/CVSROOT, such as template files.
3#
4# The first entry on a line is a filename which will be checked out from
5# the corresponding RCS file in the $CVSROOT/CVSROOT directory.
6# The remainder of the line is an error message to use if the file cannot
7# be checked out.
8#
9# File format:
10#
11# [<whitespace>]<filename>[<whitespace><error message>]<end-of-line>
12#
13# comment lines begin with '#'
diff --git a/CVSROOT/commitinfo b/CVSROOT/commitinfo
new file mode 100644
index 0000000..b19e7b7
--- /dev/null
+++ b/CVSROOT/commitinfo
@@ -0,0 +1,15 @@
1# The "commitinfo" file is used to control pre-commit checks.
2# The filter on the right is invoked with the repository and a list
3# of files to check. A non-zero exit of the filter program will
4# cause the commit to be aborted.
5#
6# The first entry on a line is a regular expression which is tested
7# against the directory that the change is being committed to, relative
8# to the $CVSROOT. For the first match that is found, then the remainder
9# of the line is the name of the filter to run.
10#
11# If the repository name does not match any of the regular expressions in this
12# file, the "DEFAULT" line is used, if it is specified.
13#
14# If the name "ALL" appears as a regular expression it is always used
15# in addition to the first matching regex or "DEFAULT".
diff --git a/CVSROOT/config b/CVSROOT/config
new file mode 100644
index 0000000..92c150b
--- /dev/null
+++ b/CVSROOT/config
@@ -0,0 +1,21 @@
1# Set this to "no" if pserver shouldn't check system users/passwords
2#SystemAuth=no
3
4# Put CVS lock files in this directory rather than directly in the repository.
5#LockDir=/var/lock/cvs
6
7# Set `TopLevelAdmin' to `yes' to create a CVS directory at the top
8# level of the new working directory when using the `cvs checkout'
9# command.
10#TopLevelAdmin=no
11
12# Set `LogHistory' to `all' or `TOEFWUPCGMAR' to log all transactions to the
13# history file, or a subset as needed (ie `TMAR' logs all write operations)
14#LogHistory=TOEFWUPCGMAR
15
16# Set `RereadLogAfterVerify' to `always' (the default) to allow the verifymsg
17# script to change the log message. Set it to `stat' to force CVS to verify# that the file has changed before reading it (this can take up to an extra
18# second per directory being committed, so it is not recommended for large
19# repositories. Set it to `never' (the previous CVS behavior) to prevent
20# verifymsg scripts from changing the log message.
21#RereadLogAfterVerify=always
diff --git a/CVSROOT/cvswrappers b/CVSROOT/cvswrappers
new file mode 100644
index 0000000..e989b75
--- /dev/null
+++ b/CVSROOT/cvswrappers
@@ -0,0 +1,19 @@
1# This file affects handling of files based on their names.
2#
3# The -m option specifies whether CVS attempts to merge files.
4#
5# The -k option specifies keyword expansion (e.g. -kb for binary).
6#
7# Format of wrapper file ($CVSROOT/CVSROOT/cvswrappers or .cvswrappers)
8#
9# wildcard [option value][option value]...
10#
11# where option is one of
12# -f from cvs filter value: path to filter
13# -t to cvs filter value: path to filter
14# -m update methodology value: MERGE or COPY
15# -k expansion mode value: b, o, kkv, &c
16#
17# and value is a single-quote delimited value.
18# For example:
19#*.gif -k 'b'
diff --git a/CVSROOT/editinfo b/CVSROOT/editinfo
new file mode 100644
index 0000000..d78886c
--- /dev/null
+++ b/CVSROOT/editinfo
@@ -0,0 +1,21 @@
1# The "editinfo" file is used to allow verification of logging
2# information. It works best when a template (as specified in the
3# rcsinfo file) is provided for the logging procedure. Given a
4# template with locations for, a bug-id number, a list of people who
5# reviewed the code before it can be checked in, and an external
6# process to catalog the differences that were code reviewed, the
7# following test can be applied to the code:
8#
9# Making sure that the entered bug-id number is correct.
10# Validating that the code that was reviewed is indeed the code being
11# checked in (using the bug-id number or a seperate review
12# number to identify this particular code set.).
13#
14# If any of the above test failed, then the commit would be aborted.
15#
16# Actions such as mailing a copy of the report to each reviewer are
17# better handled by an entry in the loginfo file.
18#
19# One thing that should be noted is the the ALL keyword is not
20# supported. There can be only one entry that matches a given
21# repository.
diff --git a/CVSROOT/loginfo b/CVSROOT/loginfo
new file mode 100644
index 0000000..537607d
--- /dev/null
+++ b/CVSROOT/loginfo
@@ -0,0 +1,27 @@
1# The "loginfo" file controls where "cvs commit" log information
2# is sent. The first entry on a line is a regular expression which must match
3# the directory that the change is being made to, relative to the
4# $CVSROOT. If a match is found, then the remainder of the line is a filter
5# program that should expect log information on its standard input.
6#
7# If the repository name does not match any of the regular expressions in this
8# file, the "DEFAULT" line is used, if it is specified.
9#
10# If the name ALL appears as a regular expression it is always used
11# in addition to the first matching regex or DEFAULT.
12#
13# You may specify a format string as part of the
14# filter. The string is composed of a `%' followed
15# by a single format character, or followed by a set of format
16# characters surrounded by `{' and `}' as separators. The format
17# characters are:
18#
19# s = file name
20# V = old version number (pre-checkin)
21# v = new version number (post-checkin)
22# t = tag or branch name
23#
24# For example:
25#DEFAULT (echo ""; id; echo %s; date; cat) >> $CVSROOT/CVSROOT/commitlog
26# or
27#DEFAULT (echo ""; id; echo %{sVv}; date; cat) >> $CVSROOT/CVSROOT/commitlog
diff --git a/CVSROOT/modules b/CVSROOT/modules
new file mode 100644
index 0000000..cb9e9ef
--- /dev/null
+++ b/CVSROOT/modules
@@ -0,0 +1,26 @@
1# Three different line formats are valid:
2# key -a aliases...
3# key [options] directory
4# key [options] directory files...
5#
6# Where "options" are composed of:
7# -i prog Run "prog" on "cvs commit" from top-level of module.
8# -o prog Run "prog" on "cvs checkout" of module.
9# -e prog Run "prog" on "cvs export" of module.
10# -t prog Run "prog" on "cvs rtag" of module.
11# -u prog Run "prog" on "cvs update" of module.
12# -d dir Place module in directory "dir" instead of module name.
13# -l Top-level directory only -- do not recurse.
14#
15# NOTE: If you change any of the "Run" options above, you'll have to
16# release and re-checkout any working directories of these modules.
17#
18# And "directory" is a path to a directory relative to $CVSROOT.
19#
20# The "-a" option specifies an alias. An alias is interpreted as if
21# everything on the right of the "-a" had been typed on the command line.
22#
23# You can encode a module within a module by using the special '&'
24# character to interpose another module into the current module. This
25# can be useful for creating a module that consists of many directories
26# spread out over the entire source repository.
diff --git a/CVSROOT/notify b/CVSROOT/notify
new file mode 100644
index 0000000..74ae6f9
--- /dev/null
+++ b/CVSROOT/notify
@@ -0,0 +1,12 @@
1# The "notify" file controls where notifications from watches set by
2# "cvs watch add" or "cvs edit" are sent. The first entry on a line is
3# a regular expression which is tested against the directory that the
4# change is being made to, relative to the $CVSROOT. If it matches,
5# then the remainder of the line is a filter program that should contain
6# one occurrence of %s for the user to notify, and information on its
7# standard input.
8#
9# "ALL" or "DEFAULT" can be used in place of the regular expression.
10#
11# For example:
12#ALL mail -s "CVS notification" %s
diff --git a/CVSROOT/rcsinfo b/CVSROOT/rcsinfo
new file mode 100644
index 0000000..49e59f4
--- /dev/null
+++ b/CVSROOT/rcsinfo
@@ -0,0 +1,13 @@
1# The "rcsinfo" file is used to control templates with which the editor
2# is invoked on commit and import.
3#
4# The first entry on a line is a regular expression which is tested
5# against the directory that the change is being made to, relative to the
6# $CVSROOT. For the first match that is found, then the remainder of the
7# line is the name of the file that contains the template.
8#
9# If the repository name does not match any of the regular expressions in this
10# file, the "DEFAULT" line is used, if it is specified.
11#
12# If the name "ALL" appears as a regular expression it is always used
13# in addition to the first matching regex or "DEFAULT".
diff --git a/CVSROOT/taginfo b/CVSROOT/taginfo
new file mode 100644
index 0000000..274a46d
--- /dev/null
+++ b/CVSROOT/taginfo
@@ -0,0 +1,20 @@
1# The "taginfo" file is used to control pre-tag checks.
2# The filter on the right is invoked with the following arguments:
3#
4# $1 -- tagname
5# $2 -- operation "add" for tag, "mov" for tag -F, and "del" for tag -d
6# $3 -- repository
7# $4-> file revision [file revision ...]
8#
9# A non-zero exit of the filter program will cause the tag to be aborted.
10#
11# The first entry on a line is a regular expression which is tested
12# against the directory that the change is being committed to, relative
13# to the $CVSROOT. For the first match that is found, then the remainder
14# of the line is the name of the filter to run.
15#
16# If the repository name does not match any of the regular expressions in this
17# file, the "DEFAULT" line is used, if it is specified.
18#
19# If the name "ALL" appears as a regular expression it is always used
20# in addition to the first matching regex or "DEFAULT".
diff --git a/CVSROOT/verifymsg b/CVSROOT/verifymsg
new file mode 100644
index 0000000..86f747c
--- /dev/null
+++ b/CVSROOT/verifymsg
@@ -0,0 +1,21 @@
1# The "verifymsg" file is used to allow verification of logging
2# information. It works best when a template (as specified in the
3# rcsinfo file) is provided for the logging procedure. Given a
4# template with locations for, a bug-id number, a list of people who
5# reviewed the code before it can be checked in, and an external
6# process to catalog the differences that were code reviewed, the
7# following test can be applied to the code:
8#
9# Making sure that the entered bug-id number is correct.
10# Validating that the code that was reviewed is indeed the code being
11# checked in (using the bug-id number or a seperate review
12# number to identify this particular code set.).
13#
14# If any of the above test failed, then the commit would be aborted.
15#
16# Actions such as mailing a copy of the report to each reviewer are
17# better handled by an entry in the loginfo file.
18#
19# One thing that should be noted is the the ALL keyword is not
20# supported. There can be only one entry that matches a given
21# repository.