1 files changed, 3724 insertions, 3710 deletions

diff --git a/OpenSim/Region/Physics/UbitOdePlugin/ODEPrim.cs b/OpenSim/Region/Physics/UbitOdePlugin/ODEPrim.cs
index fd2f88f..71aec4c 100644
--- a/OpenSim/Region/Physics/UbitOdePlugin/ODEPrim.cs
+++ b/OpenSim/Region/Physics/UbitOdePlugin/ODEPrim.cs
@@ -1,3711 +1,3725 @@
-/*
- * Copyright (c) Contributors, http://opensimulator.org/
- * See CONTRIBUTORS.TXT for a full list of copyright holders.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of the OpenSimulator Project nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/* Revision 2011/12 by Ubit Umarov
- *
- * 
- */
-
-/*
- * Revised August 26 2009 by Kitto Flora. ODEDynamics.cs replaces
- * ODEVehicleSettings.cs. It and ODEPrim.cs are re-organised:
- * ODEPrim.cs contains methods dealing with Prim editing, Prim
- * characteristics and Kinetic motion.
- * ODEDynamics.cs contains methods dealing with Prim Physical motion
- * (dynamics) and the associated settings. Old Linear and angular
- * motors for dynamic motion have been replace with  MoveLinear()
- * and MoveAngular(); 'Physical' is used only to switch ODE dynamic 
- * simualtion on/off; VEHICAL_TYPE_NONE/VEHICAL_TYPE_<other> is to
- * switch between 'VEHICLE' parameter use and general dynamics
- * settings use.
- */
-
-//#define SPAM
-
-using System;
-using System.Collections.Generic;
-using System.Reflection;
-using System.Runtime.InteropServices;
-using System.Threading;
-using log4net;
-using OpenMetaverse;
-using OdeAPI;
-using OpenSim.Framework;
-using OpenSim.Region.Physics.Manager;
-
-
-namespace OpenSim.Region.Physics.OdePlugin
-{
-    public class OdePrim : PhysicsActor
-    {
-        private static readonly ILog m_log = LogManager.GetLogger(MethodBase.GetCurrentMethod().DeclaringType);
-
-        private bool m_isphysical;
-        private bool m_fakeisphysical;
-        private bool m_isphantom;
-        private bool m_fakeisphantom;
-
-        protected bool m_building;
-        private Quaternion m_lastorientation = new Quaternion();
-        private Quaternion _orientation;
-
-        private Vector3 _position;
-        private Vector3 _velocity;
-        private Vector3 _torque;
-        private Vector3 m_lastVelocity;
-        private Vector3 m_lastposition;
-        private Vector3 m_rotationalVelocity;
-        private Vector3 _size;
-        private Vector3 _acceleration;
-        private Vector3 m_angularlock = Vector3.One;
-        private IntPtr Amotor = IntPtr.Zero;
-
-        private Vector3 m_force;
-        private Vector3 m_forceacc;
-        private Vector3 m_angularForceacc;
-
-        private Vector3 m_PIDTarget;
-        private float m_PIDTau;
-        private float PID_D = 35f;
-        private float PID_G = 25f;
-        private bool m_usePID;
-
-        // KF: These next 7 params apply to llSetHoverHeight(float height, integer water, float tau),
-        // and are for non-VEHICLES only.
-
-        private float m_PIDHoverHeight;
-        private float m_PIDHoverTau;
-        private bool m_useHoverPID;
-        private PIDHoverType m_PIDHoverType = PIDHoverType.Ground;
-        private float m_targetHoverHeight;
-        private float m_groundHeight;
-        private float m_waterHeight;
-        private float m_buoyancy;                //KF: m_buoyancy should be set by llSetBuoyancy() for non-vehicle. 
-
-        private int body_autodisable_frames = 20;
-
-        private const CollisionCategories m_default_collisionFlags = (CollisionCategories.Geom
-                                                        | CollisionCategories.Space
-                                                        | CollisionCategories.Body
-                                                        | CollisionCategories.Character
-                                                        );
-//        private bool m_collidesLand = true;
-        private bool m_collidesWater;
-        public bool m_returnCollisions;
-        private bool m_softcolide;
-
-        private bool m_NoColide;  // for now only for internal use for bad meshs
-
-        // Default we're a Geometry
-        private CollisionCategories m_collisionCategories = (CollisionCategories.Geom);
-
-        // Default, Collide with Other Geometries, spaces and Bodies
-        private CollisionCategories m_collisionFlags = m_default_collisionFlags;
-
-        public bool m_disabled;
-
-
-        public uint m_localID;
-
-        private PrimitiveBaseShape _pbs;
-        public OdeScene _parent_scene;
-
-        /// <summary>
-        /// The physics space which contains prim geometry
-        /// </summary>
-        public IntPtr m_targetSpace = IntPtr.Zero;
-
-        public IntPtr prim_geom;
-        public IntPtr _triMeshData;
-
-        private PhysicsActor _parent;
-
-        private List<OdePrim> childrenPrim = new List<OdePrim>();
-
-        private bool m_iscolliding;
-
-        public bool m_isSelected;
-        private bool m_delaySelect;
-        private bool m_lastdoneSelected;
-        public bool m_outbounds;
-
-        internal bool m_isVolumeDetect; // If true, this prim only detects collisions but doesn't collide actively
-
-        private bool m_throttleUpdates;
-        private int throttleCounter;
-        public float m_collisionscore;
-        int m_colliderfilter = 0;
-
-        public IntPtr collide_geom; // for objects: geom if single prim space it linkset
-
-        private float m_density = 10.000006836f; // Aluminum g/cm3;
-        private byte m_shapetype;
-        public bool _zeroFlag;
-        private bool m_lastUpdateSent;
-
-        public IntPtr Body = IntPtr.Zero;
-        public String Name { get; private set; }
-        private Vector3 _target_velocity;
-
-        public Vector3 primOOBsize; // prim real dimensions from mesh 
-        public Vector3 primOOBoffset; // its centroid out of mesh or rest aabb
-        public float primOOBradiusSQ;
-        public d.Mass primdMass; // prim inertia information on it's own referencial
-        float primMass; // prim own mass
-        float _mass; // object mass acording to case
-        private bool hasOOBoffsetFromMesh = false; // if true we did compute it form mesh centroid, else from aabb
-
-        public int givefakepos = 0;
-        private Vector3 fakepos;
-        public int givefakeori = 0;
-        private Quaternion fakeori;
-
-        public int m_eventsubscription;
-        private CollisionEventUpdate CollisionEventsThisFrame = new CollisionEventUpdate();
-
-        public volatile bool childPrim;
-
-        public ODEDynamics m_vehicle;
-
-        internal int m_material = (int)Material.Wood;
-        private float mu;
-        private float bounce;
-
-        /// <summary>
-        /// Is this prim subject to physics?  Even if not, it's still solid for collision purposes.
-        /// </summary>
-        public override bool IsPhysical  // this is not reliable for internal use
-        {
-            get { return m_fakeisphysical; }
-            set
-            {
-                m_fakeisphysical = value; // we show imediatly to outside that we changed physical
-                // and also to stop imediatly some updates
-                // but real change will only happen in taintprocessing
-
-                if (!value) // Zero the remembered last velocity
-                    m_lastVelocity = Vector3.Zero;
-                AddChange(changes.Physical, value);
-            }
-        }
-
-        public override bool Phantom  // this is not reliable for internal use
-        {
-            get { return m_fakeisphantom; }
-            set
-            {
-                m_fakeisphantom = value; // we show imediatly to outside that we changed physical
-                // and also to stop imediatly some updates
-                // but real change will only happen in taintprocessing
-
-                AddChange(changes.Phantom, value);
-            }
-        }
-
-        public override bool Building  // this is not reliable for internal use
-        {
-            get { return m_building; }
-            set
-            {
-                if (value)
-                    m_building = true;
-                AddChange(changes.building, value);
-            }
-        }
-
-        public override void getContactData(ref ContactData cdata)
-        {
-            cdata.mu = mu;
-            cdata.bounce = bounce;
-
-            //            cdata.softcolide = m_softcolide;
-            cdata.softcolide = false;
-
-            if (m_isphysical)
-            {
-                ODEDynamics veh;
-                if (_parent != null)
-                    veh = ((OdePrim)_parent).m_vehicle;
-                else
-                    veh = m_vehicle;
-
-                if (veh != null && veh.Type != Vehicle.TYPE_NONE)
-                    cdata.mu *= veh.FrictionFactor;
-            }
-        }    
-
-        public override int PhysicsActorType
-        {
-            get { return (int)ActorTypes.Prim; }
-            set { return; }
-        }
-
-        public override bool SetAlwaysRun
-        {
-            get { return false; }
-            set { return; }
-        }
-
-        public override uint LocalID
-        {
-            get
-            {
-                return m_localID;
-            }
-            set
-            {
-                //m_log.Info("[PHYSICS]: Setting TrackerID: " + value);
-                m_localID = value;
-            }
-        }
-
-        public override bool Grabbed
-        {
-            set { return; }
-        }
-
-        public override bool Selected
-        {
-            set
-            {
-                if (value)
-                    m_isSelected = value; // if true set imediatly to stop moves etc
-                AddChange(changes.Selected, value);
-            }
-        }
-
-        public override bool Flying
-        {
-            // no flying prims for you
-            get { return false; }
-            set { }
-        }
-
-        public override bool IsColliding
-        {
-            get { return m_iscolliding; }
-            set
-            {
-                if (value)
-                {
-                    m_colliderfilter += 2;
-                    if (m_colliderfilter > 2)
-                        m_colliderfilter = 2;
-                }
-                else
-                {
-                    m_colliderfilter--;
-                    if (m_colliderfilter < 0)
-                        m_colliderfilter = 0;
-                }
-
-                if (m_colliderfilter == 0)
-                {
-                    m_softcolide = false;
-                    m_iscolliding = false;
-                }
-                else
-                    m_iscolliding = true;
-            }
-        }
-
-        public override bool CollidingGround
-        {
-            get { return false; }
-            set { return; }
-        }
-
-        public override bool CollidingObj
-        {
-            get { return false; }
-            set { return; }
-        }
-
-        public override bool ThrottleUpdates
-        {
-            get { return m_throttleUpdates; }
-            set { m_throttleUpdates = value; }
-        }
-
-        public override bool Stopped
-        {
-            get { return _zeroFlag; }
-        }
-
-        public override Vector3 Position
-        {
-            get
-            {
-                if (givefakepos > 0)
-                    return fakepos;
-                else
-                    return _position;
-            }
-
-            set
-            {
-                fakepos = value;
-                givefakepos++;
-                AddChange(changes.Position, value);
-            }
-        }
-
-        public override Vector3 Size
-        {
-            get { return _size; }
-            set
-            {
-                if (value.IsFinite())
-                {
-                    AddChange(changes.Size, value);
-                }
-                else
-                {
-                    m_log.WarnFormat("[PHYSICS]: Got NaN Size on object {0}", Name);
-                }
-            }
-        }
-
-        public override float Mass
-        {
-            get { return _mass; }
-        }
-
-        public override Vector3 Force
-        {
-            //get { return Vector3.Zero; }
-            get { return m_force; }
-            set
-            {
-                if (value.IsFinite())
-                {
-                    AddChange(changes.Force, value);
-                }
-                else
-                {
-                    m_log.WarnFormat("[PHYSICS]: NaN in Force Applied to an Object {0}", Name);
-                }
-            }
-        }
-
-        public override void SetVolumeDetect(int param)
-        {
-            AddChange(changes.VolumeDtc, (param != 0));
-        }
-
-        public override Vector3 GeometricCenter
-        {
-            get
-            {
-                return Vector3.Zero;
-            }
-        }
-
-        public override Vector3 CenterOfMass
-        {
-            get
-            {
-                d.Vector3 dtmp;
-                if (IsPhysical && !childPrim && Body != IntPtr.Zero)
-                {
-                    dtmp = d.BodyGetPosition(Body);
-                    return new Vector3(dtmp.X, dtmp.Y, dtmp.Z);
-                }
-                else if (prim_geom != IntPtr.Zero)
-                {
-                    d.Quaternion dq;
-                    d.GeomCopyQuaternion(prim_geom, out dq);
-                    Quaternion q;
-                    q.X = dq.X;
-                    q.Y = dq.Y;
-                    q.Z = dq.Z;
-                    q.W = dq.W;
-
-                    Vector3 vtmp = primOOBoffset * q;
-                    dtmp = d.GeomGetPosition(prim_geom);
-                    return new Vector3(dtmp.X + vtmp.X, dtmp.Y + vtmp.Y, dtmp.Z + vtmp.Z);
-                }
-                else
-                    return Vector3.Zero;
-            }
-        }
-        /*
-                public override Vector3 PrimOOBsize
-                    {
-                    get
-                        {
-                        return primOOBsize;
-                        }
-                    }
-
-                public override Vector3 PrimOOBoffset
-                    {
-                    get
-                        {
-                        return primOOBoffset;
-                        }
-                    }
-
-                public override float PrimOOBRadiusSQ
-                    {
-                    get
-                        {
-                        return primOOBradiusSQ;
-                        }
-                    }
-        */
-        public override PrimitiveBaseShape Shape
-        {
-            set
-            {
-                AddChange(changes.Shape, value);
-            }
-        }
-
-        public override Vector3 Velocity
-        {
-            get
-            {
-                if (_zeroFlag)
-                    return Vector3.Zero;
-                return _velocity;
-            }
-            set
-            {
-                if (value.IsFinite())
-                {
-                    AddChange(changes.Velocity, value);
-                    //                    _velocity = value;
-
-                }
-                else
-                {
-                    m_log.WarnFormat("[PHYSICS]: Got NaN Velocity in Object {0}", Name);
-                }
-
-            }
-        }
-
-        public override Vector3 Torque
-        {
-            get
-            {
-                if (!IsPhysical || Body == IntPtr.Zero)
-                    return Vector3.Zero;
-
-                return _torque;
-            }
-
-            set
-            {
-                if (value.IsFinite())
-                {
-                    AddChange(changes.Torque, value);
-                }
-                else
-                {
-                    m_log.WarnFormat("[PHYSICS]: Got NaN Torque in Object {0}", Name);
-                }
-            }
-        }
-
-        public override float CollisionScore
-        {
-            get { return m_collisionscore; }
-            set { m_collisionscore = value; }
-        }
-
-        public override bool Kinematic
-        {
-            get { return false; }
-            set { }
-        }
-
-        public override Quaternion Orientation
-        {
-            get
-            {
-                if (givefakeori > 0)
-                    return fakeori;
-                else
-
-                    return _orientation;
-            }
-            set
-            {
-                if (QuaternionIsFinite(value))
-                {
-                    fakeori = value;
-                    givefakeori++;
-                    AddChange(changes.Orientation, value);
-                }
-                else
-                    m_log.WarnFormat("[PHYSICS]: Got NaN quaternion Orientation from Scene in Object {0}", Name);
-
-            }
-        }
-
-        public override Vector3 Acceleration
-        {
-            get { return _acceleration; }
-            set { }
-        }
-
-        public override Vector3 RotationalVelocity
-        {
-            get
-            {
-                Vector3 pv = Vector3.Zero;
-                if (_zeroFlag)
-                    return pv;
-                m_lastUpdateSent = false;
-
-                if (m_rotationalVelocity.ApproxEquals(pv, 0.0001f))
-                    return pv;
-
-                return m_rotationalVelocity;
-            }
-            set
-            {
-                if (value.IsFinite())
-                {
-                    m_rotationalVelocity = value;
-                    if (Body != IntPtr.Zero && !d.BodyIsEnabled(Body))
-                        d.BodyEnable(Body);
-                }
-                else
-                {
-                    m_log.WarnFormat("[PHYSICS]: Got NaN RotationalVelocity in Object {0}", Name);
-                }
-            }
-        }
-
-
-        public override float Buoyancy
-        {
-            get { return m_buoyancy; }
-            set
-            {
-                m_buoyancy = value;
-            }
-        }
-
-        public override bool FloatOnWater
-        {
-            set
-            {
-                AddChange(changes.CollidesWater, value);
-            }
-        }
-
-        public override Vector3 PIDTarget
-        {
-            set
-            {
-                if (value.IsFinite())
-                {
-                    m_PIDTarget = value;
-                }
-                else
-                    m_log.WarnFormat("[PHYSICS]: Got NaN PIDTarget from Scene on Object {0}", Name);
-            }
-        }
-
-        public override bool PIDActive { set { m_usePID = value; } }
-        public override float PIDTau { set { m_PIDTau = value; } }
-
-        public override float PIDHoverHeight { set { m_PIDHoverHeight = value; ; } }
-        public override bool PIDHoverActive { set { m_useHoverPID = value; } }
-        public override PIDHoverType PIDHoverType { set { m_PIDHoverType = value; } }
-        public override float PIDHoverTau { set { m_PIDHoverTau = value; } }
-
-        public override Quaternion APIDTarget { set { return; } }
-
-        public override bool APIDActive { set { return; } }
-
-        public override float APIDStrength { set { return; } }
-
-        public override float APIDDamping { set { return; } }
-
-        public override int VehicleType
-        {
-            // we may need to put a fake on this
-            get
-            {
-                if (m_vehicle == null)
-                    return (int)Vehicle.TYPE_NONE;
-                else
-                    return (int)m_vehicle.Type;
-            }
-            set
-            {
-                AddChange(changes.VehicleType, value);
-            }
-        }
-
-        public override void VehicleFloatParam(int param, float value)
-        {
-            strVehicleFloatParam fp = new strVehicleFloatParam();
-            fp.param = param;
-            fp.value = value;
-            AddChange(changes.VehicleFloatParam, fp);
-        }
-
-        public override void VehicleVectorParam(int param, Vector3 value)
-        {
-            strVehicleVectorParam fp = new strVehicleVectorParam();
-            fp.param = param;
-            fp.value = value;
-            AddChange(changes.VehicleVectorParam, fp);
-        }
-
-        public override void VehicleRotationParam(int param, Quaternion value)
-        {
-            strVehicleQuatParam fp = new strVehicleQuatParam();
-            fp.param = param;
-            fp.value = value;
-            AddChange(changes.VehicleRotationParam, fp);
-        }
-
-        public override void VehicleFlags(int param, bool value)
-        {
-            strVehicleBoolParam bp = new strVehicleBoolParam();
-            bp.param = param;
-            bp.value = value;
-            AddChange(changes.VehicleFlags, bp);
-        }
-
-        public override void SetVehicle(object vdata)
-        {
-            AddChange(changes.SetVehicle, vdata);
-        }
-        public void SetAcceleration(Vector3 accel)
-        {
-            _acceleration = accel;
-        }
-
-        public override void AddForce(Vector3 force, bool pushforce)
-        {
-            if (force.IsFinite())
-            {
-                AddChange(changes.AddForce, force / _parent_scene.ODE_STEPSIZE);
-            }
-            else
-            {
-                m_log.WarnFormat("[PHYSICS]: Got Invalid linear force vector from Scene in Object {0}", Name);
-            }
-            //m_log.Info("[PHYSICS]: Added Force:" + force.ToString() +  " to prim at " + Position.ToString());
-        }
-
-        public override void AddAngularForce(Vector3 force, bool pushforce)
-        {
-            if (force.IsFinite())
-            {
-                AddChange(changes.AddAngForce, force / _parent_scene.ODE_STEPSIZE);
-            }
-            else
-            {
-                m_log.WarnFormat("[PHYSICS]: Got Invalid Angular force vector from Scene in Object {0}", Name);
-            }
-        }
-
-        public override void CrossingFailure()
-        {
-            if (m_outbounds)
-            {
-                _position.X = Util.Clip(_position.X, 0.5f, _parent_scene.WorldExtents.X - 0.5f);
-                _position.Y = Util.Clip(_position.Y, 0.5f, _parent_scene.WorldExtents.Y - 0.5f);
-                _position.Z = Util.Clip(_position.Z + 0.2f, -100f, 50000f);
-
-                m_lastposition = _position;
-                _velocity.X = 0;
-                _velocity.Y = 0;
-                _velocity.Z = 0;
-
-                m_lastVelocity = _velocity;
-                if (m_vehicle != null && m_vehicle.Type != Vehicle.TYPE_NONE)
-                    m_vehicle.Stop();
-
-                if(Body != IntPtr.Zero)
-                    d.BodySetLinearVel(Body, 0, 0, 0); // stop it
-                if (prim_geom != IntPtr.Zero)
-                    d.GeomSetPosition(prim_geom, _position.X, _position.Y, _position.Z);
-
-                m_outbounds = false;
-                changeDisable(false);
-                base.RequestPhysicsterseUpdate();
-            }
-        }
-
-        public override void SetMomentum(Vector3 momentum)
-        {
-        }
-
-        public override void SetMaterial(int pMaterial)
-        {
-            m_material = pMaterial;
-            mu = _parent_scene.m_materialContactsData[pMaterial].mu;
-            bounce = _parent_scene.m_materialContactsData[pMaterial].bounce;
-        }
-
-        public void setPrimForRemoval()
-        {
-            AddChange(changes.Remove, null);
-        }
-
-        public override void link(PhysicsActor obj)
-        {
-            AddChange(changes.Link, obj);
-        }
-
-        public override void delink()
-        {
-            AddChange(changes.DeLink, null);
-        }
-
-        public override void LockAngularMotion(Vector3 axis)
-        {
-            // reverse the zero/non zero values for ODE.
-            if (axis.IsFinite())
-            {
-                axis.X = (axis.X > 0) ? 1f : 0f;
-                axis.Y = (axis.Y > 0) ? 1f : 0f;
-                axis.Z = (axis.Z > 0) ? 1f : 0f;
-                m_log.DebugFormat("[axislock]: <{0},{1},{2}>", axis.X, axis.Y, axis.Z);
-                AddChange(changes.AngLock, axis);
-            }
-            else
-            {
-                m_log.WarnFormat("[PHYSICS]: Got NaN locking axis from Scene on Object {0}", Name);
-            }
-        }
-
-        public override void SubscribeEvents(int ms)
-        {
-            m_eventsubscription = ms;
-            _parent_scene.AddCollisionEventReporting(this);
-        }
-
-        public override void UnSubscribeEvents()
-        {
-            _parent_scene.RemoveCollisionEventReporting(this);
-            m_eventsubscription = 0;
-        }
-
-        public void AddCollisionEvent(uint CollidedWith, ContactPoint contact)
-        {
-            if (CollisionEventsThisFrame == null)
-                CollisionEventsThisFrame = new CollisionEventUpdate();
-
-            CollisionEventsThisFrame.AddCollider(CollidedWith, contact);
-        }
-
-        public void SendCollisions()
-        {
-            if (CollisionEventsThisFrame == null)
-                return;
-
-            base.SendCollisionUpdate(CollisionEventsThisFrame);
-
-            if (CollisionEventsThisFrame.m_objCollisionList.Count == 0)
-                CollisionEventsThisFrame = null;
-            else
-                CollisionEventsThisFrame = new CollisionEventUpdate();
-        }
-
-        public override bool SubscribedEvents()
-        {
-            if (m_eventsubscription > 0)
-                return true;
-            return false;
-        }
-
-
-        public OdePrim(String primName, OdeScene parent_scene, Vector3 pos, Vector3 size,
-                       Quaternion rotation, PrimitiveBaseShape pbs, bool pisPhysical,bool pisPhantom,byte _shapeType,uint plocalID)
-        {
-            Name = primName;
-            LocalID = plocalID;
-
-            m_vehicle = null;
-
-            if (!pos.IsFinite())
-            {
-                pos = new Vector3(((float)Constants.RegionSize * 0.5f), ((float)Constants.RegionSize * 0.5f),
-                    parent_scene.GetTerrainHeightAtXY(((float)Constants.RegionSize * 0.5f), ((float)Constants.RegionSize * 0.5f)) + 0.5f);
-                m_log.WarnFormat("[PHYSICS]: Got nonFinite Object create Position for {0}", Name);
-            }
-            _position = pos;
-            givefakepos = 0;
-
-            PID_D = parent_scene.bodyPIDD;
-            PID_G = parent_scene.bodyPIDG;
-            m_density = parent_scene.geomDefaultDensity;
-            // m_tensor = parent_scene.bodyMotorJointMaxforceTensor;
-            body_autodisable_frames = parent_scene.bodyFramesAutoDisable;
-
-            prim_geom = IntPtr.Zero;
-            collide_geom = IntPtr.Zero;
-            Body = IntPtr.Zero;
-
-            if (!size.IsFinite())
-            {
-                size = new Vector3(0.5f, 0.5f, 0.5f);
-                m_log.WarnFormat("[PHYSICS]: Got nonFinite Object create Size for {0}", Name);
-            }
-
-            if (size.X <= 0) size.X = 0.01f;
-            if (size.Y <= 0) size.Y = 0.01f;
-            if (size.Z <= 0) size.Z = 0.01f;
-
-            _size = size;
-
-            if (!QuaternionIsFinite(rotation))
-            {
-                rotation = Quaternion.Identity;
-                m_log.WarnFormat("[PHYSICS]: Got nonFinite Object create Rotation for {0}", Name);
-            }
-
-            _orientation = rotation;
-            givefakeori = 0;
-
-            _pbs = pbs;
-
-            _parent_scene = parent_scene;
-            m_targetSpace = IntPtr.Zero;
-
-            if (pos.Z < 0)
-            {
-                m_isphysical = false;
-            }
-            else
-            {
-                m_isphysical = pisPhysical;
-            }
-            m_fakeisphysical = m_isphysical;
-
-            m_isVolumeDetect = false;
-
-            m_force = Vector3.Zero;
-
-            m_iscolliding = false;
-            m_colliderfilter = 0;
-            m_softcolide = true;
-            m_NoColide = false;
-
-            hasOOBoffsetFromMesh = false;
-            _triMeshData = IntPtr.Zero;
-
-            m_shapetype = _shapeType;
-
-            m_lastdoneSelected = false;
-            m_isSelected = false;
-            m_delaySelect = false;
-
-            m_isphantom = pisPhantom;
-            m_fakeisphantom = pisPhantom;
-
-            mu = parent_scene.m_materialContactsData[(int)Material.Wood].mu;
-            bounce = parent_scene.m_materialContactsData[(int)Material.Wood].bounce;
-
-            CalcPrimBodyData();
-
-            m_building = true; // control must set this to false when done
-
-            AddChange(changes.Add, null);
-        }
-
-        private void resetCollisionAccounting()
-        {
-            m_collisionscore = 0;
-        }
-
-        private void createAMotor(Vector3 axis)
-        {
-            if (Body == IntPtr.Zero)
-                return;
-
-            if (Amotor != IntPtr.Zero)
-            {
-                d.JointDestroy(Amotor);
-                Amotor = IntPtr.Zero;
-            }
-
-            int axisnum = 3 - (int)(axis.X + axis.Y + axis.Z);
-
-            if (axisnum <= 0)
-                return;
-
-            // stop it
-            d.BodySetTorque(Body, 0, 0, 0);
-            d.BodySetAngularVel(Body, 0, 0, 0);
-
-            Amotor = d.JointCreateAMotor(_parent_scene.world, IntPtr.Zero);
-            d.JointAttach(Amotor, Body, IntPtr.Zero);
-
-            d.JointSetAMotorMode(Amotor, 0);
-
-            d.JointSetAMotorNumAxes(Amotor, axisnum);
-
-            // get current orientation to lock
-
-            d.Quaternion dcur = d.BodyGetQuaternion(Body);
-            Quaternion curr; // crap convertion between identical things
-            curr.X = dcur.X;
-            curr.Y = dcur.Y;
-            curr.Z = dcur.Z;
-            curr.W = dcur.W;
-            Vector3 ax;
-
-            int i = 0;
-            int j = 0;
-            if (axis.X == 0)
-            {
-                ax = (new Vector3(1, 0, 0)) * curr; // rotate world X to current local X
-                // ODE should do this  with axis relative to body 1 but seems to fail
-                d.JointSetAMotorAxis(Amotor, 0, 0, ax.X, ax.Y, ax.Z);
-                d.JointSetAMotorAngle(Amotor, 0, 0);
-                d.JointSetAMotorParam(Amotor, (int)d.JointParam.LoStop, -0.000001f);
-                d.JointSetAMotorParam(Amotor, (int)d.JointParam.HiStop, 0.000001f);
-                d.JointSetAMotorParam(Amotor, (int)d.JointParam.Vel, 0);
-                d.JointSetAMotorParam(Amotor, (int)d.JointParam.FudgeFactor, 0.0001f);
-                d.JointSetAMotorParam(Amotor, (int)d.JointParam.Bounce, 0f);
-                d.JointSetAMotorParam(Amotor, (int)d.JointParam.FMax, 5e8f);
-                d.JointSetAMotorParam(Amotor, (int)d.JointParam.StopCFM, 0f);
-                d.JointSetAMotorParam(Amotor, (int)d.JointParam.StopERP, 0.8f);
-                i++;
-                j = 256; // move to next axis set
-            }
-
-            if (axis.Y == 0)
-            {
-                ax = (new Vector3(0, 1, 0)) * curr;
-                d.JointSetAMotorAxis(Amotor, i, 0, ax.X, ax.Y, ax.Z);
-                d.JointSetAMotorAngle(Amotor, i, 0);
-                d.JointSetAMotorParam(Amotor, j + (int)d.JointParam.LoStop, -0.000001f);
-                d.JointSetAMotorParam(Amotor, j + (int)d.JointParam.HiStop, 0.000001f);
-                d.JointSetAMotorParam(Amotor, j + (int)d.JointParam.Vel, 0);
-                d.JointSetAMotorParam(Amotor, j + (int)d.JointParam.FudgeFactor, 0.0001f);
-                d.JointSetAMotorParam(Amotor, j + (int)d.JointParam.Bounce, 0f);
-                d.JointSetAMotorParam(Amotor, j + (int)d.JointParam.FMax, 5e8f);
-                d.JointSetAMotorParam(Amotor, j + (int)d.JointParam.StopCFM, 0f);
-                d.JointSetAMotorParam(Amotor, j + (int)d.JointParam.StopERP, 0.8f);
-                i++;
-                j += 256;
-            }
-
-            if (axis.Z == 0)
-            {
-                ax = (new Vector3(0, 0, 1)) * curr;
-                d.JointSetAMotorAxis(Amotor, i, 0, ax.X, ax.Y, ax.Z);
-                d.JointSetAMotorAngle(Amotor, i, 0);
-                d.JointSetAMotorParam(Amotor, j + (int)d.JointParam.LoStop, -0.000001f);
-                d.JointSetAMotorParam(Amotor, j + (int)d.JointParam.HiStop, 0.000001f);
-                d.JointSetAMotorParam(Amotor, j + (int)d.JointParam.Vel, 0);
-                d.JointSetAMotorParam(Amotor, j + (int)d.JointParam.FudgeFactor, 0.0001f);
-                d.JointSetAMotorParam(Amotor, j + (int)d.JointParam.Bounce, 0f);
-                d.JointSetAMotorParam(Amotor, j + (int)d.JointParam.FMax, 5e8f);
-                d.JointSetAMotorParam(Amotor, j + (int)d.JointParam.StopCFM, 0f);
-                d.JointSetAMotorParam(Amotor, j + (int)d.JointParam.StopERP, 0.8f);
-            }
-        }
-
-        private bool setMesh(OdeScene parent_scene)
-        {
-            if (Body != IntPtr.Zero)
-            {
-                if (childPrim)
-                {
-                    if (_parent != null)
-                    {
-                        OdePrim parent = (OdePrim)_parent;
-                        parent.ChildDelink(this, false);
-                    }
-                }
-                else
-                {
-                    DestroyBody();
-                }
-            }
-
-            bool convex;
-            if (m_shapetype == 0)
-                convex = false;
-            else
-                convex = true;
-
-            IMesh mesh = _parent_scene.mesher.CreateMesh(Name, _pbs, _size, (int)LevelOfDetail.High, true,convex);
-            if (mesh == null)
-            {
-                m_log.WarnFormat("[PHYSICS]: CreateMesh Failed on prim {0} at <{1},{2},{3}>.", Name, _position.X, _position.Y, _position.Z);
-                return false;
-            }
-
-            IntPtr vertices, indices;
-            int vertexCount, indexCount;
-            int vertexStride, triStride;
-
-            mesh.getVertexListAsPtrToFloatArray(out vertices, out vertexStride, out vertexCount); // Note, that vertices are fixed in unmanaged heap
-            mesh.getIndexListAsPtrToIntArray(out indices, out triStride, out indexCount); // Also fixed, needs release after usage
-
-            if (vertexCount == 0 || indexCount == 0)
-            {
-                m_log.WarnFormat("[PHYSICS]: Got invalid mesh on prim {0} at <{1},{2},{3}>. mesh UUID {4}",
-                    Name, _position.X, _position.Y, _position.Z, _pbs.SculptTexture.ToString());
-                mesh.releaseSourceMeshData();
-                return false;
-            }
-
-            primOOBoffset = mesh.GetCentroid();
-            hasOOBoffsetFromMesh = true;
-
-            mesh.releaseSourceMeshData();
-
-            IntPtr geo = IntPtr.Zero;
-
-            try
-            {
-                _triMeshData = d.GeomTriMeshDataCreate();
-
-                d.GeomTriMeshDataBuildSimple(_triMeshData, vertices, vertexStride, vertexCount, indices, indexCount, triStride);
-                d.GeomTriMeshDataPreprocess(_triMeshData);
-
-                _parent_scene.waitForSpaceUnlock(m_targetSpace);
-                geo = d.CreateTriMesh(m_targetSpace, _triMeshData, null, null, null);
-            }
-
-            catch (Exception e)
-            {
-                m_log.ErrorFormat("[PHYSICS]: SetGeom Mesh failed for {0} exception: {1}", Name, e);
-                if (_triMeshData != IntPtr.Zero)
-                {
-                    d.GeomTriMeshDataDestroy(_triMeshData);
-                    _triMeshData = IntPtr.Zero;
-                }
-                return false;
-            }
-
-            SetGeom(geo);
-            return true;
-        }
-
-        private void SetGeom(IntPtr geom)
-        {
-            prim_geom = geom;
-            //Console.WriteLine("SetGeom to " + prim_geom + " for " + Name);
-            if (prim_geom != IntPtr.Zero)
-            {
-                if (m_NoColide)
-                {
-                    d.GeomSetCategoryBits(prim_geom, 0);
-                    if (m_isphysical)
-                    {
-                        d.GeomSetCollideBits(prim_geom, (int)CollisionCategories.Land);
-                    }
-                    else
-                    {
-                        d.GeomSetCollideBits(prim_geom, 0);
-                        d.GeomDisable(prim_geom);
-                    }
-                }
-                else
-                {
-                    d.GeomSetCategoryBits(prim_geom, (int)m_collisionCategories);
-                    d.GeomSetCollideBits(prim_geom, (int)m_collisionFlags);
-                }
-
-                CalcPrimBodyData();
-
-                _parent_scene.geom_name_map[prim_geom] = Name;
-                _parent_scene.actor_name_map[prim_geom] = this;
-
-            }
-            else
-                m_log.Warn("Setting bad Geom");
-        }
-
-
-        /// <summary>
-        /// Create a geometry for the given mesh in the given target space.
-        /// </summary>
-        /// <param name="m_targetSpace"></param>
-        /// <param name="mesh">If null, then a mesh is used that is based on the profile shape data.</param>
-        private void CreateGeom()
-        {
-            if (_triMeshData != IntPtr.Zero)
-            {
-                d.GeomTriMeshDataDestroy(_triMeshData);
-                _triMeshData = IntPtr.Zero;
-            }
-
-            bool haveMesh = false;
-            hasOOBoffsetFromMesh = false;
-            m_NoColide = false;
-
-            if (_parent_scene.needsMeshing(_pbs))
-            {
-                haveMesh = setMesh(_parent_scene); // this will give a mesh to non trivial known prims
-                if (!haveMesh)
-                    m_NoColide = true;
-            }
-
-            if (!haveMesh)
-            {
-                if (_pbs.ProfileShape == ProfileShape.HalfCircle && _pbs.PathCurve == (byte)Extrusion.Curve1
-                    && _size.X == _size.Y && _size.Y == _size.Z)
-                { // it's a sphere
-                    _parent_scene.waitForSpaceUnlock(m_targetSpace);
-                    try
-                    {
-                        SetGeom(d.CreateSphere(m_targetSpace, _size.X * 0.5f));
-                    }
-                    catch (Exception e)
-                    {
-                        m_log.WarnFormat("[PHYSICS]: Create sphere failed: {0}", e);
-                        return;
-                    }
-                }
-                else
-                {// do it as a box
-                    _parent_scene.waitForSpaceUnlock(m_targetSpace);
-                    try
-                    {
-                        //Console.WriteLine("  CreateGeom 4");
-                        SetGeom(d.CreateBox(m_targetSpace, _size.X, _size.Y, _size.Z));
-                    }
-                    catch (Exception e)
-                    {
-                        m_log.Warn("[PHYSICS]: Create box failed: {0}", e);
-                        return;
-                    }
-                }
-            }
-        }
-
-        /// <summary>
-        /// Set a new geometry for this prim.
-        /// </summary>
-        /// <param name="geom"></param>
-        private void RemoveGeom()
-        {
-            if (prim_geom != IntPtr.Zero)
-            {
-                _parent_scene.geom_name_map.Remove(prim_geom);
-                _parent_scene.actor_name_map.Remove(prim_geom);
-                try
-                {
-                    d.GeomDestroy(prim_geom);
-                    if (_triMeshData != IntPtr.Zero)
-                    {
-                        d.GeomTriMeshDataDestroy(_triMeshData);
-                        _triMeshData = IntPtr.Zero;
-                    }
-                }
-                //                catch (System.AccessViolationException)
-                catch (Exception e)
-                {
-                    m_log.ErrorFormat("[PHYSICS]: PrimGeom destruction failed for {0} exception {1}", Name, e);
-                }
-
-                prim_geom = IntPtr.Zero;
-            }
-            else
-            {
-                m_log.ErrorFormat("[PHYSICS]: PrimGeom destruction BAD {0}", Name);
-            }
-            Body = IntPtr.Zero;
-            hasOOBoffsetFromMesh = false;
-            CalcPrimBodyData();
-        }
-
-        private void ChildSetGeom(OdePrim odePrim)
-        {
-            // well.. 
-            DestroyBody();
-            MakeBody();
-        }
-
-        //sets non physical prim m_targetSpace to right space in spaces grid for static prims
-        // should only be called for non physical prims unless they are becoming non physical
-        private void SetInStaticSpace(OdePrim prim)
-        {
-            IntPtr targetSpace = _parent_scene.MoveGeomToStaticSpace(prim.prim_geom, prim._position, prim.m_targetSpace);
-            prim.m_targetSpace = targetSpace;
-            d.GeomEnable(prim_geom);
-        }
-
-        public void enableBodySoft()
-        {
-            if (!childPrim && !m_isSelected)
-            {
-                if (m_isphysical && Body != IntPtr.Zero)
-                {
-                    if (m_isphantom && !m_isVolumeDetect)
-                    {
-                        m_collisionCategories = 0;
-                        m_collisionFlags = CollisionCategories.Land;
-                    }
-                    else
-                    {
-                        m_collisionCategories |= CollisionCategories.Body;
-                        m_collisionFlags |= (CollisionCategories.Land | CollisionCategories.Wind);
-                    }
-
-                    foreach (OdePrim prm in childrenPrim)
-                    {
-                        prm.m_collisionCategories = m_collisionCategories;
-                        prm.m_collisionFlags = m_collisionFlags;
-
-                        if (prm.prim_geom != IntPtr.Zero)
-                        {
-                            if (prm.m_NoColide)
-                            {
-                                d.GeomSetCategoryBits(prm.prim_geom, 0);
-                                d.GeomSetCollideBits(prm.prim_geom, (int)CollisionCategories.Land);
-                            }
-                            else
-                            {
-                                d.GeomSetCategoryBits(prm.prim_geom, (int)m_collisionCategories);
-                                d.GeomSetCollideBits(prm.prim_geom, (int)m_collisionFlags);
-                            }
-                            d.GeomEnable(prm.prim_geom);
-                        }
-                    }
-
-                    if (prim_geom != IntPtr.Zero)
-                    {
-                        if (m_NoColide)
-                        {
-                            d.GeomSetCategoryBits(prim_geom, 0);
-                            d.GeomSetCollideBits(prim_geom, (int)CollisionCategories.Land);
-                        }
-                        else
-                        {
-                            d.GeomSetCategoryBits(prim_geom, (int)m_collisionCategories);
-                            d.GeomSetCollideBits(prim_geom, (int)m_collisionFlags);
-                        }
-                        d.GeomEnable(prim_geom);
-                    }
-                    d.BodyEnable(Body);
-                }
-            }
-            m_disabled = false;
-            resetCollisionAccounting(); // this sets m_disable to false
-        }
-
-        private void disableBodySoft()
-        {
-            m_disabled = true;
-            if (!childPrim)
-            {
-                if (m_isphysical && Body != IntPtr.Zero)
-                {
-                    m_collisionCategories &= ~CollisionCategories.Body;
-                    m_collisionFlags &= ~(CollisionCategories.Wind | CollisionCategories.Land);
-
-                    foreach (OdePrim prm in childrenPrim)
-                    {
-                        prm.m_collisionCategories = m_collisionCategories;
-                        prm.m_collisionFlags = m_collisionFlags;
-
-                        if (prm.prim_geom != IntPtr.Zero)
-                        {
-                            if (prm.m_NoColide)
-                            {
-                                d.GeomSetCategoryBits(prm.prim_geom, 0);
-                                d.GeomSetCollideBits(prm.prim_geom, 0);
-                            }
-                            else
-                            {
-                                d.GeomSetCategoryBits(prm.prim_geom, (int)m_collisionCategories);
-                                d.GeomSetCollideBits(prm.prim_geom, (int)m_collisionFlags);
-                            }
-                            d.GeomDisable(prm.prim_geom);
-                        }
-                    }
-
-                    if (prim_geom != IntPtr.Zero)
-                    {
-                        if (m_NoColide)
-                        {
-                            d.GeomSetCategoryBits(prim_geom, 0);
-                            d.GeomSetCollideBits(prim_geom, 0);
-                        }
-                        else
-                        {
-                            d.GeomSetCategoryBits(prim_geom, (int)m_collisionCategories);
-                            d.GeomSetCollideBits(prim_geom, (int)m_collisionFlags);
-                        }
-                        d.GeomDisable(prim_geom);
-                    }
-
-                    d.BodyDisable(Body);
-                }
-            }
-        }
-
-        private void MakeBody()
-        {
-            if (!m_isphysical) // only physical get bodies
-                return;
-
-            if (childPrim)  // child prims don't get bodies;
-                return;
-
-            if (m_building)
-                return;
-
-            if (prim_geom == IntPtr.Zero)
-            {
-                m_log.Warn("[PHYSICS]: Unable to link the linkset.  Root has no geom yet");
-                return;
-            }
-
-            if (Body != IntPtr.Zero)
-            {
-                d.BodyDestroy(Body);
-                Body = IntPtr.Zero;
-                m_log.Warn("[PHYSICS]: MakeBody called having a body");
-            }
-
-
-            if (d.GeomGetBody(prim_geom) != IntPtr.Zero)
-            {
-                d.GeomSetBody(prim_geom, IntPtr.Zero);
-                m_log.Warn("[PHYSICS]: MakeBody root geom already had a body");
-            }
-
-            d.Matrix3 mymat = new d.Matrix3();
-            d.Quaternion myrot = new d.Quaternion();
-            d.Mass objdmass = new d.Mass { };
-
-            Body = d.BodyCreate(_parent_scene.world);
-
-            DMassDup(ref primdMass, out objdmass);
-
-            // rotate inertia
-            myrot.X = _orientation.X;
-            myrot.Y = _orientation.Y;
-            myrot.Z = _orientation.Z;
-            myrot.W = _orientation.W;
-
-            d.RfromQ(out mymat, ref myrot);
-            d.MassRotate(ref objdmass, ref mymat);
-
-            // set the body rotation and position
-            d.BodySetRotation(Body, ref mymat);
-
-            // recompute full object inertia if needed
-            if (childrenPrim.Count > 0)
-            {
-                d.Matrix3 mat = new d.Matrix3();
-                d.Quaternion quat = new d.Quaternion();
-                d.Mass tmpdmass = new d.Mass { };
-                Vector3 rcm;
-
-                rcm.X = _position.X + objdmass.c.X;
-                rcm.Y = _position.Y + objdmass.c.Y;
-                rcm.Z = _position.Z + objdmass.c.Z;
-
-                lock (childrenPrim)
-                {
-                    foreach (OdePrim prm in childrenPrim)
-                    {
-                        if (prm.prim_geom == IntPtr.Zero)
-                        {
-                            m_log.Warn("[PHYSICS]: Unable to link one of the linkset elements, skipping it.  No geom yet");
-                            continue;
-                        }
-
-                        DMassCopy(ref prm.primdMass, ref tmpdmass);
-
-                        // apply prim current rotation to inertia
-                        quat.X = prm._orientation.X;
-                        quat.Y = prm._orientation.Y;
-                        quat.Z = prm._orientation.Z;
-                        quat.W = prm._orientation.W;
-                        d.RfromQ(out mat, ref quat);
-                        d.MassRotate(ref tmpdmass, ref mat);
-
-                        Vector3 ppos = prm._position;
-                        ppos.X += tmpdmass.c.X - rcm.X;
-                        ppos.Y += tmpdmass.c.Y - rcm.Y;
-                        ppos.Z += tmpdmass.c.Z - rcm.Z;
-
-                        // refer inertia to root prim center of mass position
-                        d.MassTranslate(ref tmpdmass,
-                            ppos.X,
-                            ppos.Y,
-                            ppos.Z);
-
-                        d.MassAdd(ref objdmass, ref tmpdmass); // add to total object inertia
-                        // fix prim colision cats
-
-                        if (d.GeomGetBody(prm.prim_geom) != IntPtr.Zero)
-                        {
-                            d.GeomSetBody(prm.prim_geom, IntPtr.Zero);
-                            m_log.Warn("[PHYSICS]: MakeBody child geom already had a body");
-                        }
-
-                        d.GeomClearOffset(prm.prim_geom);
-                        d.GeomSetBody(prm.prim_geom, Body);
-                        prm.Body = Body;
-                        d.GeomSetOffsetWorldRotation(prm.prim_geom, ref mat); // set relative rotation
-                    }
-                }
-            }
-
-            d.GeomClearOffset(prim_geom); // make sure we don't have a hidden offset
-            // associate root geom with body
-            d.GeomSetBody(prim_geom, Body);
-
-            d.BodySetPosition(Body, _position.X + objdmass.c.X, _position.Y + objdmass.c.Y, _position.Z + objdmass.c.Z);
-            d.GeomSetOffsetWorldPosition(prim_geom, _position.X, _position.Y, _position.Z);
-
-            d.MassTranslate(ref objdmass, -objdmass.c.X, -objdmass.c.Y, -objdmass.c.Z); // ode wants inertia at center of body
-            myrot.W = -myrot.W;
-            d.RfromQ(out mymat, ref myrot);
-            d.MassRotate(ref objdmass, ref mymat);
-            d.BodySetMass(Body, ref objdmass);
-            _mass = objdmass.mass;
-
-            // disconnect from world gravity so we can apply buoyancy
-            d.BodySetGravityMode(Body, false);
-
-            d.BodySetAutoDisableFlag(Body, true);
-            d.BodySetAutoDisableSteps(Body, body_autodisable_frames);
-            //            d.BodySetLinearDampingThreshold(Body, 0.01f);
-            //            d.BodySetAngularDampingThreshold(Body, 0.001f);
-            d.BodySetDamping(Body, .002f, .002f);
-
-
-                if (m_targetSpace != IntPtr.Zero)
-                {
-                    _parent_scene.waitForSpaceUnlock(m_targetSpace);
-                    if (d.SpaceQuery(m_targetSpace, prim_geom))
-                        d.SpaceRemove(m_targetSpace, prim_geom);
-                }
-
-
-            if (childrenPrim.Count == 0)
-            {
-                collide_geom = prim_geom;
-                m_targetSpace = _parent_scene.ActiveSpace;
-                d.SpaceAdd(m_targetSpace, prim_geom);
-            }
-            else
-            {
-                m_targetSpace = d.HashSpaceCreate(_parent_scene.ActiveSpace);
-                d.HashSpaceSetLevels(m_targetSpace, -2, 8);
-                d.SpaceSetSublevel(m_targetSpace, 3);
-                d.SpaceSetCleanup(m_targetSpace, false);
-                d.SpaceAdd(m_targetSpace, prim_geom);
-                collide_geom = m_targetSpace;
-            }
-
-            if (m_delaySelect)
-            {
-                m_isSelected = true;
-                m_delaySelect = false;
-            }
-
-            lock (childrenPrim)
-            {
-                foreach (OdePrim prm in childrenPrim)
-                {
-                    if (prm.prim_geom == IntPtr.Zero)
-                        continue;
-
-                    Vector3 ppos = prm._position;
-                    d.GeomSetOffsetWorldPosition(prm.prim_geom, ppos.X, ppos.Y, ppos.Z); // set relative position
-
-                    if (prm.m_targetSpace != m_targetSpace)
-                    {
-                        if (prm.m_targetSpace != IntPtr.Zero)
-                        {
-                            _parent_scene.waitForSpaceUnlock(prm.m_targetSpace);
-                            if (d.SpaceQuery(prm.m_targetSpace, prm.prim_geom))
-                                d.SpaceRemove(prm.m_targetSpace, prm.prim_geom);
-                        }
-                        prm.m_targetSpace = m_targetSpace;
-                        d.SpaceAdd(m_targetSpace, prm.prim_geom);
-                    }
-
-                    if (m_isSelected || m_disabled)
-                    {
-                        prm.m_collisionCategories &= ~CollisionCategories.Body;
-                        prm.m_collisionFlags &= ~(CollisionCategories.Land | CollisionCategories.Wind);
-                        d.GeomDisable(prm.prim_geom);
-                    }
-                    else
-                    {
-                        if (m_isphantom && !m_isVolumeDetect)
-                        {
-                            prm.m_collisionCategories = 0;
-                            prm.m_collisionFlags = CollisionCategories.Land;
-                        }
-                        else
-                        {
-                            prm.m_collisionCategories |= CollisionCategories.Body;
-                            prm.m_collisionFlags |= (CollisionCategories.Land | CollisionCategories.Wind);
-                        }
-                        d.GeomEnable(prm.prim_geom);
-                    }
-
-                    if (prm.m_NoColide)
-                    {
-                        d.GeomSetCategoryBits(prm.prim_geom, 0);
-                        d.GeomSetCollideBits(prm.prim_geom, (int)CollisionCategories.Land);
-                        d.GeomEnable(prm.prim_geom);
-                    }
-                    else
-                    {
-                        d.GeomSetCategoryBits(prm.prim_geom, (int)prm.m_collisionCategories);
-                        d.GeomSetCollideBits(prm.prim_geom, (int)prm.m_collisionFlags);
-                    }
-                    prm.m_collisionscore = 0;
-
-                    if(!m_disabled)
-                        prm.m_disabled = false;
-
-                    _parent_scene.addActivePrim(prm);
-                }
-            }
-
-            // The body doesn't already have a finite rotation mode set here
-            if ((!m_angularlock.ApproxEquals(Vector3.One, 0.0f)) && _parent == null)
-            {
-                createAMotor(m_angularlock);
-            }
-
-            if (m_isSelected || m_disabled)
-            {
-                m_collisionCategories &= ~CollisionCategories.Body;
-                m_collisionFlags &= ~(CollisionCategories.Land | CollisionCategories.Wind);
-
-                d.GeomDisable(prim_geom);
-                d.BodyDisable(Body);
-            }
-            else
-            {
-                if (m_isphantom && !m_isVolumeDetect)
-                {
-                    m_collisionCategories = 0;
-                    m_collisionFlags = CollisionCategories.Land;
-                }
-                else
-                {
-                    m_collisionCategories |= CollisionCategories.Body;
-                    m_collisionFlags |= (CollisionCategories.Land | CollisionCategories.Wind);
-                }
-
-                d.BodySetAngularVel(Body, m_rotationalVelocity.X, m_rotationalVelocity.Y, m_rotationalVelocity.Z);
-                d.BodySetLinearVel(Body, _velocity.X, _velocity.Y, _velocity.Z);
-            }
-
-            if (m_NoColide)
-            {
-                d.GeomSetCategoryBits(prim_geom, 0);
-                d.GeomSetCollideBits(prim_geom, (int)CollisionCategories.Land);
-            }
-            else
-            {
-                d.GeomSetCategoryBits(prim_geom, (int)m_collisionCategories);
-                d.GeomSetCollideBits(prim_geom, (int)m_collisionFlags);
-            }
-
-            m_collisionscore = 0;
-
-            m_softcolide = true;
-            _parent_scene.addActivePrim(this);
-            _parent_scene.addActiveGroups(this);
-        }
-
-        private void DestroyBody()
-        {
-            if (Body != IntPtr.Zero)
-            {
-                _parent_scene.remActivePrim(this);
-                m_collisionCategories &= ~CollisionCategories.Body;
-                m_collisionFlags &= ~(CollisionCategories.Wind | CollisionCategories.Land);
-                if (prim_geom != IntPtr.Zero)
-                {
-                    if (m_NoColide)
-                    {
-                        d.GeomSetCategoryBits(prim_geom, 0);
-                        d.GeomSetCollideBits(prim_geom, 0);
-                    }
-                    else
-                    {
-                        d.GeomSetCategoryBits(prim_geom, (int)m_collisionCategories);
-                        d.GeomSetCollideBits(prim_geom, (int)m_collisionFlags);
-                    }
-                    UpdateDataFromGeom();
-                    d.GeomSetBody(prim_geom, IntPtr.Zero);
-                    SetInStaticSpace(this);
-                }
-
-                if (!childPrim)
-                {
-                    lock (childrenPrim)
-                    {
-                        foreach (OdePrim prm in childrenPrim)
-                        {
-                            _parent_scene.remActivePrim(prm);
-                            prm.m_collisionCategories = m_collisionCategories;
-                            prm.m_collisionFlags = m_collisionFlags;
-                            if (prm.prim_geom != IntPtr.Zero)
-                            {
-                                if (prm.m_NoColide)
-                                {
-                                    d.GeomSetCategoryBits(prm.prim_geom, 0);
-                                    d.GeomSetCollideBits(prm.prim_geom, 0);
-                                }
-                                else
-                                {
-                                    d.GeomSetCategoryBits(prm.prim_geom, (int)m_collisionCategories);
-                                    d.GeomSetCollideBits(prm.prim_geom, (int)m_collisionFlags);
-                                }
-                                prm.UpdateDataFromGeom();
-                                SetInStaticSpace(prm);
-                            }
-                            prm.Body = IntPtr.Zero;
-                            prm._mass = prm.primMass;
-                            prm.m_collisionscore = 0;
-                        }
-                    }
-                    if (Amotor != IntPtr.Zero)
-                    {
-                        d.JointDestroy(Amotor);
-                        Amotor = IntPtr.Zero;
-                    }
-                    _parent_scene.remActiveGroup(this);
-                    d.BodyDestroy(Body);
-                }
-                Body = IntPtr.Zero;
-            }
-            _mass = primMass;
-            m_collisionscore = 0;
-        }
-
-        #region Mass Calculation
-
-        private float CalculatePrimVolume()
-        {
-            float volume = _size.X * _size.Y * _size.Z; // default
-            float tmp;
-
-            float hollowAmount = (float)_pbs.ProfileHollow * 2.0e-5f;
-            float hollowVolume = hollowAmount * hollowAmount;
-
-            switch (_pbs.ProfileShape)
-            {
-                case ProfileShape.Square:
-                    // default box
-
-                    if (_pbs.PathCurve == (byte)Extrusion.Straight)
-                    {
-                        if (hollowAmount > 0.0)
-                        {
-                            switch (_pbs.HollowShape)
-                            {
-                                case HollowShape.Square:
-                                case HollowShape.Same:
-                                    break;
-
-                                case HollowShape.Circle:
-
-                                    hollowVolume *= 0.78539816339f;
-                                    break;
-
-                                case HollowShape.Triangle:
-
-                                    hollowVolume *= (0.5f * .5f);
-                                    break;
-
-                                default:
-                                    hollowVolume = 0;
-                                    break;
-                            }
-                            volume *= (1.0f - hollowVolume);
-                        }
-                    }
-
-                    else if (_pbs.PathCurve == (byte)Extrusion.Curve1)
-                    {
-                        //a tube 
-
-                        volume *= 0.78539816339e-2f * (float)(200 - _pbs.PathScaleX);
-                        tmp = 1.0f - 2.0e-2f * (float)(200 - _pbs.PathScaleY);
-                        volume -= volume * tmp * tmp;
-
-                        if (hollowAmount > 0.0)
-                        {
-                            hollowVolume *= hollowAmount;
-
-                            switch (_pbs.HollowShape)
-                            {
-                                case HollowShape.Square:
-                                case HollowShape.Same:
-                                    break;
-
-                                case HollowShape.Circle:
-                                    hollowVolume *= 0.78539816339f;
-                                    break;
-
-                                case HollowShape.Triangle:
-                                    hollowVolume *= 0.5f * 0.5f;
-                                    break;
-                                default:
-                                    hollowVolume = 0;
-                                    break;
-                            }
-                            volume *= (1.0f - hollowVolume);
-                        }
-                    }
-
-                    break;
-
-                case ProfileShape.Circle:
-
-                    if (_pbs.PathCurve == (byte)Extrusion.Straight)
-                    {
-                        volume *= 0.78539816339f; // elipse base
-
-                        if (hollowAmount > 0.0)
-                        {
-                            switch (_pbs.HollowShape)
-                            {
-                                case HollowShape.Same:
-                                case HollowShape.Circle:
-                                    break;
-
-                                case HollowShape.Square:
-                                    hollowVolume *= 0.5f * 2.5984480504799f;
-                                    break;
-
-                                case HollowShape.Triangle:
-                                    hollowVolume *= .5f * 1.27323954473516f;
-                                    break;
-
-                                default:
-                                    hollowVolume = 0;
-                                    break;
-                            }
-                            volume *= (1.0f - hollowVolume);
-                        }
-                    }
-
-                    else if (_pbs.PathCurve == (byte)Extrusion.Curve1)
-                    {
-                        volume *= 0.61685027506808491367715568749226e-2f * (float)(200 - _pbs.PathScaleX);
-                        tmp = 1.0f - .02f * (float)(200 - _pbs.PathScaleY);
-                        volume *= (1.0f - tmp * tmp);
-
-                        if (hollowAmount > 0.0)
-                        {
-
-                            // calculate the hollow volume by it's shape compared to the prim shape
-                            hollowVolume *= hollowAmount;
-
-                            switch (_pbs.HollowShape)
-                            {
-                                case HollowShape.Same:
-                                case HollowShape.Circle:
-                                    break;
-
-                                case HollowShape.Square:
-                                    hollowVolume *= 0.5f * 2.5984480504799f;
-                                    break;
-
-                                case HollowShape.Triangle:
-                                    hollowVolume *= .5f * 1.27323954473516f;
-                                    break;
-
-                                default:
-                                    hollowVolume = 0;
-                                    break;
-                            }
-                            volume *= (1.0f - hollowVolume);
-                        }
-                    }
-                    break;
-
-                case ProfileShape.HalfCircle:
-                    if (_pbs.PathCurve == (byte)Extrusion.Curve1)
-                    {
-                        volume *= 0.52359877559829887307710723054658f;
-                    }
-                    break;
-
-                case ProfileShape.EquilateralTriangle:
-
-                    if (_pbs.PathCurve == (byte)Extrusion.Straight)
-                    {
-                        volume *= 0.32475953f;
-
-                        if (hollowAmount > 0.0)
-                        {
-
-                            // calculate the hollow volume by it's shape compared to the prim shape
-                            switch (_pbs.HollowShape)
-                            {
-                                case HollowShape.Same:
-                                case HollowShape.Triangle:
-                                    hollowVolume *= .25f;
-                                    break;
-
-                                case HollowShape.Square:
-                                    hollowVolume *= 0.499849f * 3.07920140172638f;
-                                    break;
-
-                                case HollowShape.Circle:
-                                    // Hollow shape is a perfect cyllinder in respect to the cube's scale
-                                    // Cyllinder hollow volume calculation
-
-                                    hollowVolume *= 0.1963495f * 3.07920140172638f;
-                                    break;
-
-                                default:
-                                    hollowVolume = 0;
-                                    break;
-                            }
-                            volume *= (1.0f - hollowVolume);
-                        }
-                    }
-                    else if (_pbs.PathCurve == (byte)Extrusion.Curve1)
-                    {
-                        volume *= 0.32475953f;
-                        volume *= 0.01f * (float)(200 - _pbs.PathScaleX);
-                        tmp = 1.0f - .02f * (float)(200 - _pbs.PathScaleY);
-                        volume *= (1.0f - tmp * tmp);
-
-                        if (hollowAmount > 0.0)
-                        {
-
-                            hollowVolume *= hollowAmount;
-
-                            switch (_pbs.HollowShape)
-                            {
-                                case HollowShape.Same:
-                                case HollowShape.Triangle:
-                                    hollowVolume *= .25f;
-                                    break;
-
-                                case HollowShape.Square:
-                                    hollowVolume *= 0.499849f * 3.07920140172638f;
-                                    break;
-
-                                case HollowShape.Circle:
-
-                                    hollowVolume *= 0.1963495f * 3.07920140172638f;
-                                    break;
-
-                                default:
-                                    hollowVolume = 0;
-                                    break;
-                            }
-                            volume *= (1.0f - hollowVolume);
-                        }
-                    }
-                    break;
-
-                default:
-                    break;
-            }
-
-            float taperX1;
-            float taperY1;
-            float taperX;
-            float taperY;
-            float pathBegin;
-            float pathEnd;
-            float profileBegin;
-            float profileEnd;
-
-            if (_pbs.PathCurve == (byte)Extrusion.Straight || _pbs.PathCurve == (byte)Extrusion.Flexible)
-            {
-                taperX1 = _pbs.PathScaleX * 0.01f;
-                if (taperX1 > 1.0f)
-                    taperX1 = 2.0f - taperX1;
-                taperX = 1.0f - taperX1;
-
-                taperY1 = _pbs.PathScaleY * 0.01f;
-                if (taperY1 > 1.0f)
-                    taperY1 = 2.0f - taperY1;
-                taperY = 1.0f - taperY1;
-            }
-            else
-            {
-                taperX = _pbs.PathTaperX * 0.01f;
-                if (taperX < 0.0f)
-                    taperX = -taperX;
-                taperX1 = 1.0f - taperX;
-
-                taperY = _pbs.PathTaperY * 0.01f;
-                if (taperY < 0.0f)
-                    taperY = -taperY;
-                taperY1 = 1.0f - taperY;
-            }
-
-            volume *= (taperX1 * taperY1 + 0.5f * (taperX1 * taperY + taperX * taperY1) + 0.3333333333f * taperX * taperY);
-
-            pathBegin = (float)_pbs.PathBegin * 2.0e-5f;
-            pathEnd = 1.0f - (float)_pbs.PathEnd * 2.0e-5f;
-            volume *= (pathEnd - pathBegin);
-
-            // this is crude aproximation
-            profileBegin = (float)_pbs.ProfileBegin * 2.0e-5f;
-            profileEnd = 1.0f - (float)_pbs.ProfileEnd * 2.0e-5f;
-            volume *= (profileEnd - profileBegin);
-
-            return volume;
-        }
-
-
-        private void CalcPrimBodyData()
-        {
-            float volume;
-
-            if (prim_geom == IntPtr.Zero)
-            {
-                // Ubit let's have a initial basic OOB
-                primOOBsize.X = _size.X;
-                primOOBsize.Y = _size.Y;
-                primOOBsize.Z = _size.Z;
-                primOOBoffset = Vector3.Zero;
-            }
-            else
-            {
-                d.AABB AABB;
-                d.GeomGetAABB(prim_geom, out AABB); // get the AABB from engine geom
-
-                primOOBsize.X = (AABB.MaxX - AABB.MinX);
-                primOOBsize.Y = (AABB.MaxY - AABB.MinY);
-                primOOBsize.Z = (AABB.MaxZ - AABB.MinZ);
-                if (!hasOOBoffsetFromMesh)
-                {
-                    primOOBoffset.X = (AABB.MaxX + AABB.MinX) * 0.5f;
-                    primOOBoffset.Y = (AABB.MaxY + AABB.MinY) * 0.5f;
-                    primOOBoffset.Z = (AABB.MaxZ + AABB.MinZ) * 0.5f;
-                }
-            }
-
-            // also its own inertia and mass
-            // keep using basic shape mass for now
-            volume = CalculatePrimVolume();
-
-            primMass = m_density * volume;
-
-            if (primMass <= 0)
-                primMass = 0.0001f;//ckrinke: Mass must be greater then zero.
-            if (primMass > _parent_scene.maximumMassObject)
-                primMass = _parent_scene.maximumMassObject;
-
-            _mass = primMass; // just in case
-
-            d.MassSetBoxTotal(out primdMass, primMass, primOOBsize.X, primOOBsize.Y, primOOBsize.Z);
-
-            d.MassTranslate(ref primdMass,
-                                primOOBoffset.X,
-                                primOOBoffset.Y,
-                                primOOBoffset.Z);
-
-            primOOBsize *= 0.5f; // let obb size be a corner coords
-            primOOBradiusSQ = primOOBsize.LengthSquared();
-        }
-
-
-        #endregion
-
-
-        /// <summary>
-        /// Add a child prim to this parent prim.
-        /// </summary>
-        /// <param name="prim">Child prim</param>
-        // I'm the parent
-        // prim is the child
-        public void ParentPrim(OdePrim prim)
-        {
-            //Console.WriteLine("ParentPrim  " + m_primName);
-            if (this.m_localID != prim.m_localID)
-            {
-                DestroyBody();  // for now we need to rebuil entire object on link change
-
-                lock (childrenPrim)
-                {
-                    // adopt the prim
-                    if (!childrenPrim.Contains(prim))
-                        childrenPrim.Add(prim);
-
-                    // see if this prim has kids and adopt them also
-                    // should not happen for now
-                    foreach (OdePrim prm in prim.childrenPrim)
-                    {
-                        if (!childrenPrim.Contains(prm))
-                        {
-                            if (prm.Body != IntPtr.Zero)
-                            {
-                                if (prm.prim_geom != IntPtr.Zero)
-                                    d.GeomSetBody(prm.prim_geom, IntPtr.Zero);
-                                if (prm.Body != prim.Body)
-                                    prm.DestroyBody(); // don't loose bodies around
-                                prm.Body = IntPtr.Zero;
-                            }
-
-                            childrenPrim.Add(prm);
-                            prm._parent = this;
-                        }
-                    }
-                }
-                //Remove old children from the prim
-                prim.childrenPrim.Clear();
-
-                if (prim.Body != IntPtr.Zero)
-                {
-                    if (prim.prim_geom != IntPtr.Zero)
-                        d.GeomSetBody(prim.prim_geom, IntPtr.Zero);
-                    prim.DestroyBody(); // don't loose bodies around
-                    prim.Body = IntPtr.Zero;
-                }
-
-                prim.childPrim = true;
-                prim._parent = this;
-
-                MakeBody(); // full nasty reconstruction
-            }
-        }
-
-        private void UpdateChildsfromgeom()
-        {
-            if (childrenPrim.Count > 0)
-            {
-                foreach (OdePrim prm in childrenPrim)
-                    prm.UpdateDataFromGeom();
-            }
-        }
-
-        private void UpdateDataFromGeom()
-        {
-            if (prim_geom != IntPtr.Zero)
-            {
-                d.Vector3 lpos;
-                d.GeomCopyPosition(prim_geom, out lpos);
-                _position.X = lpos.X;
-                _position.Y = lpos.Y;
-                _position.Z = lpos.Z;
-                d.Quaternion qtmp = new d.Quaternion { };
-                d.GeomCopyQuaternion(prim_geom, out qtmp);
-                _orientation.W = qtmp.W;
-                _orientation.X = qtmp.X;
-                _orientation.Y = qtmp.Y;
-                _orientation.Z = qtmp.Z;
-            }
-        }
-
-        private void ChildDelink(OdePrim odePrim, bool remakebodies)
-        {
-            // Okay, we have a delinked child.. destroy all body and remake
-            if (odePrim != this && !childrenPrim.Contains(odePrim))
-                return;
-
-            DestroyBody();
-
-            if (odePrim == this) // delinking the root prim
-            {
-                OdePrim newroot = null;
-                lock (childrenPrim)
-                {
-                    if (childrenPrim.Count > 0)
-                    {
-                        newroot = childrenPrim[0];
-                        childrenPrim.RemoveAt(0);
-                        foreach (OdePrim prm in childrenPrim)
-                        {
-                            newroot.childrenPrim.Add(prm);
-                        }
-                        childrenPrim.Clear();
-                    }
-                    if (newroot != null)
-                    {
-                        newroot.childPrim = false;
-                        newroot._parent = null;
-                        if (remakebodies)
-                            newroot.MakeBody();
-                    }
-                }
-            }
-
-            else
-            {
-                lock (childrenPrim)
-                {
-                    childrenPrim.Remove(odePrim);
-                    odePrim.childPrim = false;
-                    odePrim._parent = null;
-                    //                    odePrim.UpdateDataFromGeom();
-                    if (remakebodies)
-                        odePrim.MakeBody();
-                }
-            }
-            if (remakebodies)
-                MakeBody();
-        }
-
-        protected void ChildRemove(OdePrim odePrim, bool reMakeBody)
-        {
-            // Okay, we have a delinked child.. destroy all body and remake
-            if (odePrim != this && !childrenPrim.Contains(odePrim))
-                return;
-
-            DestroyBody();
-
-            if (odePrim == this)
-            {
-                OdePrim newroot = null;
-                lock (childrenPrim)
-                {
-                    if (childrenPrim.Count > 0)
-                    {
-                        newroot = childrenPrim[0];
-                        childrenPrim.RemoveAt(0);
-                        foreach (OdePrim prm in childrenPrim)
-                        {
-                            newroot.childrenPrim.Add(prm);
-                        }
-                        childrenPrim.Clear();
-                    }
-                    if (newroot != null)
-                    {
-                        newroot.childPrim = false;
-                        newroot._parent = null;
-                        newroot.MakeBody();
-                    }
-                }
-                if (reMakeBody)
-                    MakeBody();
-                return;
-            }
-            else
-            {
-                lock (childrenPrim)
-                {
-                    childrenPrim.Remove(odePrim);
-                    odePrim.childPrim = false;
-                    odePrim._parent = null;
-                    if (reMakeBody)
-                        odePrim.MakeBody();
-                }
-            }
-            MakeBody();
-        }
-
-        #region changes
-
-        private void changeadd()
-        {
-            CreateGeom();
-
-            if (prim_geom != IntPtr.Zero)
-            {
-                d.GeomSetPosition(prim_geom, _position.X, _position.Y, _position.Z);
-                d.Quaternion myrot = new d.Quaternion();
-                myrot.X = _orientation.X;
-                myrot.Y = _orientation.Y;
-                myrot.Z = _orientation.Z;
-                myrot.W = _orientation.W;
-                d.GeomSetQuaternion(prim_geom, ref myrot);
-
-                if (!m_isphysical)
-                    SetInStaticSpace(this);
-            }
-
-            if (m_isphysical && Body == IntPtr.Zero)
-            {
-                MakeBody();
-            }
-        }
-
-        private void changeAngularLock(Vector3 newLock)
-        {
-            // do we have a Physical object?
-            if (Body != IntPtr.Zero)
-            {
-                //Check that we have a Parent
-                //If we have a parent then we're not authorative here
-                if (_parent == null)
-                {
-                    if (!newLock.ApproxEquals(Vector3.One, 0f))
-                    {
-                        createAMotor(newLock);
-                    }
-                    else
-                    {
-                        if (Amotor != IntPtr.Zero)
-                        {
-                            d.JointDestroy(Amotor);
-                            Amotor = IntPtr.Zero;
-                        }
-                    }
-                }
-            }
-            // Store this for later in case we get turned into a separate body
-            m_angularlock = newLock;
-        }
-
-        private void changeLink(OdePrim NewParent)
-        {
-            if (_parent == null && NewParent != null)
-            {
-                NewParent.ParentPrim(this);
-            }
-            else if (_parent != null)
-            {
-                if (_parent is OdePrim)
-                {
-                    if (NewParent != _parent)
-                    {
-                        (_parent as OdePrim).ChildDelink(this, false); // for now...
-                        childPrim = false;
-
-                        if (NewParent != null)
-                        {
-                            NewParent.ParentPrim(this);
-                        }
-                    }
-                }
-            }
-            _parent = NewParent;
-        }
-
-
-        private void Stop()
-        {
-            if (!childPrim)
-            {
-                m_force = Vector3.Zero;
-                m_forceacc = Vector3.Zero;
-                m_angularForceacc = Vector3.Zero;
-                _torque = Vector3.Zero;
-                _velocity = Vector3.Zero;
-                _acceleration = Vector3.Zero;
-                m_rotationalVelocity = Vector3.Zero;
-                _target_velocity = Vector3.Zero;
-                if (m_vehicle != null && m_vehicle.Type != Vehicle.TYPE_NONE)
-                    m_vehicle.Stop();
-            }
-
-            if (Body != IntPtr.Zero)
-            {
-                d.BodySetForce(Body, 0f, 0f, 0f);
-                d.BodySetTorque(Body, 0f, 0f, 0f);
-                d.BodySetLinearVel(Body, 0f, 0f, 0f);
-                d.BodySetAngularVel(Body, 0f, 0f, 0f);
-            }
-        }
-
-
-        private void changePhantomStatus(bool newval)
-        {
-            m_isphantom = newval;
-
-            if (m_isSelected)
-            {
-                m_collisionCategories = CollisionCategories.Selected;
-                m_collisionFlags = (CollisionCategories.Sensor | CollisionCategories.Space);
-            }
-            else
-            {
-                if (m_isphantom && !m_isVolumeDetect)
-                {
-                    m_collisionCategories = 0;
-                    if (m_isphysical)
-                        m_collisionFlags = CollisionCategories.Land;
-                    else
-                        m_collisionFlags = 0; // should never happen
-                }
-
-                else
-                {
-                    m_collisionCategories = CollisionCategories.Geom;
-                    if (m_isphysical)
-                        m_collisionCategories |= CollisionCategories.Body;
-
-                    m_collisionFlags = m_default_collisionFlags | CollisionCategories.Land;
-
-                    if (m_collidesWater)
-                        m_collisionFlags |= CollisionCategories.Water;
-                }
-            }
-
-            if (!childPrim)
-            {
-                foreach (OdePrim prm in childrenPrim)
-                {
-                    prm.m_collisionCategories = m_collisionCategories;
-                    prm.m_collisionFlags = m_collisionFlags;
-
-                    if (!prm.m_disabled && prm.prim_geom != IntPtr.Zero)
-                    {
-                        if (prm.m_NoColide)
-                        {
-                            d.GeomSetCategoryBits(prm.prim_geom, 0);
-                            if (m_isphysical)
-                                d.GeomSetCollideBits(prm.prim_geom, (int)CollisionCategories.Land);
-                            else
-                                d.GeomSetCollideBits(prm.prim_geom, 0);
-                        }
-                        else
-                        {
-                            d.GeomSetCategoryBits(prm.prim_geom, (int)m_collisionCategories);
-                            d.GeomSetCollideBits(prm.prim_geom, (int)m_collisionFlags);
-                        }
-                        if(!m_isSelected)
-                            d.GeomEnable(prm.prim_geom);
-                    }
-                }
-            }
-
-            if (!m_disabled && prim_geom != IntPtr.Zero)
-            {
-                if (m_NoColide)
-                {
-                    d.GeomSetCategoryBits(prim_geom, 0);
-                    if (m_isphysical)
-                        d.GeomSetCollideBits(prim_geom, (int)CollisionCategories.Land);
-                    else
-                        d.GeomSetCollideBits(prim_geom, 0);
-                }
-                else
-                {
-                    d.GeomSetCategoryBits(prim_geom, (int)m_collisionCategories);
-                    d.GeomSetCollideBits(prim_geom, (int)m_collisionFlags);
-                }
-                if(!m_isSelected)
-                    d.GeomEnable(prim_geom);
-            }
-        }
-
-        private void changeSelectedStatus(bool newval)
-        {
-            if (m_lastdoneSelected == newval)
-                return;
-
-            m_lastdoneSelected = newval;
-            DoSelectedStatus(newval);
-        }
-
-        private void CheckDelaySelect()
-        {
-            if (m_delaySelect)
-            {
-                DoSelectedStatus(m_isSelected);
-            }
-        }
-
-        private void DoSelectedStatus(bool newval)
-        {
-            m_isSelected = newval;
-            Stop();
-
-            if (newval)
-            {
-                if (!childPrim && Body != IntPtr.Zero)
-                    d.BodyDisable(Body);
-
-                if (m_delaySelect || m_isphysical)
-                {
-                    m_collisionCategories = CollisionCategories.Selected;
-                    m_collisionFlags = (CollisionCategories.Sensor | CollisionCategories.Space);
-
-                    if (!childPrim)
-                    {
-                        foreach (OdePrim prm in childrenPrim)
-                        {
-                            prm.m_collisionCategories = m_collisionCategories;
-                            prm.m_collisionFlags = m_collisionFlags;
-
-                            if (prm.prim_geom != null)
-                            {
-
-                                if (prm.m_NoColide)
-                                {
-                                    d.GeomSetCategoryBits(prm.prim_geom, 0);
-                                    d.GeomSetCollideBits(prm.prim_geom, 0);
-                                }
-                                else
-                                {
-                                    d.GeomSetCategoryBits(prm.prim_geom, (int)m_collisionCategories);
-                                    d.GeomSetCollideBits(prm.prim_geom, (int)m_collisionFlags);
-                                }
-                                d.GeomDisable(prm.prim_geom);
-                            }
-                            prm.m_delaySelect = false;
-                        }
-                    }
-
-                    if (prim_geom != null)
-                    {
-                        if (m_NoColide)
-                        {
-                            d.GeomSetCategoryBits(prim_geom, 0);
-                            d.GeomSetCollideBits(prim_geom, 0);
-                        }
-                        else
-                        {
-                            d.GeomSetCategoryBits(prim_geom, (int)m_collisionCategories);
-                            d.GeomSetCollideBits(prim_geom, (int)m_collisionFlags);
-                        }
-                        d.GeomDisable(prim_geom);
-                    }
-
-                    m_delaySelect = false;
-                }
-                else if(!m_isphysical)
-                {
-                    m_delaySelect = true;
-                }
-            }
-            else
-            {
-                if (!childPrim && Body != IntPtr.Zero && !m_disabled)
-                    d.BodyEnable(Body);
-
-                if (m_isphantom && !m_isVolumeDetect)
-                {
-                    m_collisionCategories = 0;
-                    if(m_isphysical)
-                        m_collisionFlags = CollisionCategories.Land;
-                    else
-                        m_collisionFlags = 0;
-                }
-                else
-                {
-                    m_collisionCategories = CollisionCategories.Geom;
-                    if (m_isphysical)
-                        m_collisionCategories |= CollisionCategories.Body;
-
-                    m_collisionFlags = m_default_collisionFlags | CollisionCategories.Land;
-
-                    if (m_collidesWater)
-                        m_collisionFlags |= CollisionCategories.Water;
-                }
-
-                if (!childPrim)
-                {
-                    foreach (OdePrim prm in childrenPrim)
-                    {
-                        prm.m_collisionCategories = m_collisionCategories;
-                        prm.m_collisionFlags = m_collisionFlags;
-
-                        if (!prm.m_disabled && prm.prim_geom != IntPtr.Zero)
-                        {
-                            if (prm.m_NoColide)
-                            {
-                                d.GeomSetCategoryBits(prm.prim_geom, 0);
-                                if (m_isphysical)
-                                    d.GeomSetCollideBits(prm.prim_geom, (int)CollisionCategories.Land);
-                                else
-                                    d.GeomSetCollideBits(prm.prim_geom, 0);
-                            }
-                            else
-                            {
-                                d.GeomSetCategoryBits(prm.prim_geom, (int)m_collisionCategories);
-                                d.GeomSetCollideBits(prm.prim_geom, (int)m_collisionFlags);
-                            }
-                            d.GeomEnable(prm.prim_geom);
-                        }
-                        prm.m_delaySelect = false;
-                        prm.m_softcolide = true;
-                    }
-                }
-
-                if (!m_disabled && prim_geom != IntPtr.Zero)
-                {
-                    if (m_NoColide)
-                    {
-                        d.GeomSetCategoryBits(prim_geom, 0);
-                        if (m_isphysical)
-                            d.GeomSetCollideBits(prim_geom, (int)CollisionCategories.Land);
-                        else
-                            d.GeomSetCollideBits(prim_geom, 0);
-                    }
-                    else
-                    {
-                        d.GeomSetCategoryBits(prim_geom, (int)m_collisionCategories);
-                        d.GeomSetCollideBits(prim_geom, (int)m_collisionFlags);
-                    }
-                    d.GeomEnable(prim_geom);
-                }
-
-                m_delaySelect = false;
-                m_softcolide = true;
-            }
-
-            resetCollisionAccounting();
-        }
-
-        private void changePosition(Vector3 newPos)
-        {
-            CheckDelaySelect();
-            if (m_isphysical)
-            {
-                if (childPrim)  // inertia is messed, must rebuild
-                {
-                    if (m_building)
-                    {
-                        _position = newPos;
-                    }
-                }
-                else
-                {
-                    if (_position != newPos)
-                    {
-                        d.GeomSetPosition(prim_geom, newPos.X, newPos.Y, newPos.Z);
-                        _position = newPos;
-                    }
-                    if (Body != IntPtr.Zero && !d.BodyIsEnabled(Body))
-                        d.BodyEnable(Body);
-                }
-            }
-            else
-            {
-                if (prim_geom != IntPtr.Zero)
-                {
-                    if (newPos != _position)
-                    {
-                        d.GeomSetPosition(prim_geom, newPos.X, newPos.Y, newPos.Z);
-                        _position = newPos;
-
-                        m_targetSpace = _parent_scene.MoveGeomToStaticSpace(prim_geom, _position, m_targetSpace);
-                    }
-                }
-            }
-            givefakepos--;
-            if (givefakepos < 0)
-                givefakepos = 0;
-            //            changeSelectedStatus();
-            m_softcolide = true;
-            resetCollisionAccounting();
-        }
-
-        private void changeOrientation(Quaternion newOri)
-        {
-            CheckDelaySelect();
-            if (m_isphysical)
-            {
-                if (childPrim)  // inertia is messed, must rebuild
-                {
-                    if (m_building)
-                    {
-                        _orientation = newOri;
-                    }
-                }
-                else
-                {
-                    if (newOri != _orientation)
-                    {
-                        d.Quaternion myrot = new d.Quaternion();
-                        myrot.X = newOri.X;
-                        myrot.Y = newOri.Y;
-                        myrot.Z = newOri.Z;
-                        myrot.W = newOri.W;
-                        d.GeomSetQuaternion(prim_geom, ref myrot);
-                        _orientation = newOri;
-                        if (Body != IntPtr.Zero && !m_angularlock.ApproxEquals(Vector3.One, 0f))
-                            createAMotor(m_angularlock);
-                    }
-                    if (Body != IntPtr.Zero && !d.BodyIsEnabled(Body))
-                        d.BodyEnable(Body);
-                }
-            }
-            else
-            {
-                if (prim_geom != IntPtr.Zero)
-                {
-                    if (newOri != _orientation)
-                    {
-                        d.Quaternion myrot = new d.Quaternion();
-                        myrot.X = newOri.X;
-                        myrot.Y = newOri.Y;
-                        myrot.Z = newOri.Z;
-                        myrot.W = newOri.W;
-                        d.GeomSetQuaternion(prim_geom, ref myrot);
-                        _orientation = newOri;
-                    }
-                }
-            }
-            givefakeori--;
-            if (givefakeori < 0)
-                givefakeori = 0;
-            m_softcolide = true;
-            resetCollisionAccounting();
-        }
-
-        private void changePositionAndOrientation(Vector3 newPos, Quaternion newOri)
-        {
-            CheckDelaySelect();
-            if (m_isphysical)
-            {
-                if (childPrim && m_building)  // inertia is messed, must rebuild
-                {
-                    _position = newPos;
-                    _orientation = newOri;
-                }
-                else
-                {
-                    if (newOri != _orientation)
-                    {
-                        d.Quaternion myrot = new d.Quaternion();
-                        myrot.X = newOri.X;
-                        myrot.Y = newOri.Y;
-                        myrot.Z = newOri.Z;
-                        myrot.W = newOri.W;
-                        d.GeomSetQuaternion(prim_geom, ref myrot);
-                        _orientation = newOri;
-                        if (Body != IntPtr.Zero && !m_angularlock.ApproxEquals(Vector3.One, 0f))
-                            createAMotor(m_angularlock);
-                    }
-                    if (_position != newPos)
-                    {
-                        d.GeomSetPosition(prim_geom, newPos.X, newPos.Y, newPos.Z);
-                        _position = newPos;
-                    }
-                    if (Body != IntPtr.Zero && !d.BodyIsEnabled(Body))
-                        d.BodyEnable(Body);
-                }
-            }
-            else
-            {
-                // string primScenAvatarIn = _parent_scene.whichspaceamIin(_position);
-                // int[] arrayitem = _parent_scene.calculateSpaceArrayItemFromPos(_position);
-
-                if (prim_geom != IntPtr.Zero)
-                {
-                    if (newOri != _orientation)
-                    {
-                        d.Quaternion myrot = new d.Quaternion();
-                        myrot.X = newOri.X;
-                        myrot.Y = newOri.Y;
-                        myrot.Z = newOri.Z;
-                        myrot.W = newOri.W;
-                        d.GeomSetQuaternion(prim_geom, ref myrot);
-                        _orientation = newOri;
-                    }
-
-                    if (newPos != _position)
-                    {
-                        d.GeomSetPosition(prim_geom, newPos.X, newPos.Y, newPos.Z);
-                        _position = newPos;
-
-                        m_targetSpace = _parent_scene.MoveGeomToStaticSpace(prim_geom, _position, m_targetSpace);
-                    }
-                }
-            }
-            givefakepos--;
-            if (givefakepos < 0)
-                givefakepos = 0;
-            givefakeori--;
-            if (givefakeori < 0)
-                givefakeori = 0;
-
-            m_softcolide = true;
-            resetCollisionAccounting();
-        }
-
-
-        private void changeDisable(bool disable)
-        {
-            if (disable)
-            {
-                if (!m_disabled)
-                    disableBodySoft();
-            }
-            else
-            {
-                if (m_disabled)
-                    enableBodySoft();
-            }
-        }
-
-        private void changePhysicsStatus(bool NewStatus)
-        {
-            CheckDelaySelect();
-
-            m_isphysical = NewStatus;
-
-            if (!childPrim)
-            {
-                if (NewStatus)
-                {
-                    if (Body == IntPtr.Zero)
-                        MakeBody();
-                }
-                else
-                {
-                    if (Body != IntPtr.Zero)
-                    {
-                        DestroyBody();
-                    }
-                    Stop();
-                }
-            }
-
-            resetCollisionAccounting();
-        }
-
-        private void changeprimsizeshape()
-        {
-            CheckDelaySelect();
-
-            OdePrim parent = (OdePrim)_parent;
-
-            bool chp = childPrim;
-
-            if (chp)
-            {
-                if (parent != null)
-                {
-                    parent.DestroyBody();
-                }
-            }
-            else
-            {
-                DestroyBody();
-            }
-
-            RemoveGeom();
-
-            // we don't need to do space calculation because the client sends a position update also.
-            if (_size.X <= 0)
-                _size.X = 0.01f;
-            if (_size.Y <= 0)
-                _size.Y = 0.01f;
-            if (_size.Z <= 0)
-                _size.Z = 0.01f;
-            // Construction of new prim
-
-            CreateGeom();
-
-            if (prim_geom != IntPtr.Zero)
-            {
-                d.GeomSetPosition(prim_geom, _position.X, _position.Y, _position.Z);
-                d.Quaternion myrot = new d.Quaternion();
-                myrot.X = _orientation.X;
-                myrot.Y = _orientation.Y;
-                myrot.Z = _orientation.Z;
-                myrot.W = _orientation.W;
-                d.GeomSetQuaternion(prim_geom, ref myrot);
-            }
-
-            if (chp)
-            {
-                if (parent != null)
-                {
-                    parent.MakeBody();
-                }
-            }
-            else
-                MakeBody();
-
-            m_softcolide = true;
-            resetCollisionAccounting();
-        }
-
-        private void changeSize(Vector3 newSize)
-        {
-            _size = newSize;
-            changeprimsizeshape();
-        }
-
-        private void changeShape(PrimitiveBaseShape newShape)
-        {
-            _pbs = newShape;
-            changeprimsizeshape();
-        }
-
-        private void changeFloatOnWater(bool newval)
-        {
-            m_collidesWater = newval;
-
-            if (prim_geom != IntPtr.Zero && !m_isphantom)
-            {
-                if (m_collidesWater)
-                {
-                    m_collisionFlags |= CollisionCategories.Water;
-                }
-                else
-                {
-                    m_collisionFlags &= ~CollisionCategories.Water;
-                }
-                d.GeomSetCollideBits(prim_geom, (int)m_collisionFlags);
-            }
-        }
-
-        private void changeSetTorque(Vector3 newtorque)
-        {
-            if (!m_isSelected)
-            {
-                if (m_isphysical && Body != IntPtr.Zero)
-                {
-                    if (m_disabled)
-                        enableBodySoft();
-                    else if (!d.BodyIsEnabled(Body))
-                        d.BodyEnable(Body);
-
-                }
-                _torque = newtorque;
-            }
-        }
-
-        private void changeForce(Vector3 force)
-        {
-            m_force = force;
-            if (Body != IntPtr.Zero && !d.BodyIsEnabled(Body))
-                d.BodyEnable(Body);
-        }
-
-        private void changeAddForce(Vector3 force)
-        {
-            m_forceacc += force;
-            if (!m_isSelected)
-            {
-                lock (this)
-                {
-                    //m_log.Info("[PHYSICS]: dequeing forcelist");
-                    if (m_isphysical && Body != IntPtr.Zero)
-                    {
-                        if (m_disabled)
-                            enableBodySoft();
-                        else if (!d.BodyIsEnabled(Body))
-                            d.BodyEnable(Body);
-                    }
-                }
-
-                m_collisionscore = 0;
-            }
-        }
-
-        private void changeAddAngularForce(Vector3 aforce)
-        {
-            m_angularForceacc += aforce;
-            if (!m_isSelected)
-            {
-                lock (this)
-                {
-                    if (m_isphysical && Body != IntPtr.Zero)
-                    {
-                        if (m_disabled)
-                            enableBodySoft();
-                        else if (!d.BodyIsEnabled(Body))
-                            d.BodyEnable(Body);
-                    }
-                }
-                m_collisionscore = 0;
-            }
-        }
-
-        private void changevelocity(Vector3 newVel)
-        {
-            if (!m_isSelected)
-            {
-                if (Body != IntPtr.Zero)
-                {
-                    if (m_disabled)
-                        enableBodySoft();
-                    else if (!d.BodyIsEnabled(Body))
-                        d.BodyEnable(Body);
-
-                    d.BodySetLinearVel(Body, newVel.X, newVel.Y, newVel.Z);
-                }
-                //resetCollisionAccounting();           
-            }
-            _velocity = newVel;
-        }
-
-        private void changeVolumedetetion(bool newVolDtc)
-        {
-            m_isVolumeDetect = newVolDtc;
-        }
-
-        protected void changeBuilding(bool newbuilding)
-        {
-            if ((bool)newbuilding)
-            {
-                m_building = true;
-                if (!childPrim)
-                    DestroyBody();
-            }
-            else
-            {
-                m_building = false;
-                CheckDelaySelect();
-                if (!childPrim)
-                    MakeBody();
-            }
-            if (!childPrim && childrenPrim.Count > 0)
-            {
-                foreach (OdePrim prm in childrenPrim)
-                    prm.changeBuilding(m_building); // call directly
-            }
-        }
-
-       public void changeSetVehicle(VehicleData vdata)
-        {
-            if (m_vehicle == null)
-                m_vehicle = new ODEDynamics(this);
-            m_vehicle.DoSetVehicle(vdata);
-        }
-        private void changeVehicleType(int value)
-        {
-            if (value == (int)Vehicle.TYPE_NONE)
-            {
-                if (m_vehicle != null)
-                    m_vehicle = null;
-            }
-            else
-            {
-                if (m_vehicle == null)
-                    m_vehicle = new ODEDynamics(this);
-
-                m_vehicle.ProcessTypeChange((Vehicle)value);
-            }
-        }
-
-        private void changeVehicleFloatParam(strVehicleFloatParam fp)
-        {
-            if (m_vehicle == null)
-                return;
-
-            m_vehicle.ProcessFloatVehicleParam((Vehicle)fp.param, fp.value);
-        }
-
-        private void changeVehicleVectorParam(strVehicleVectorParam vp)
-        {
-            if (m_vehicle == null)
-                return;
-            m_vehicle.ProcessVectorVehicleParam((Vehicle)vp.param, vp.value);
-        }
-
-        private void changeVehicleRotationParam(strVehicleQuatParam qp)
-        {
-            if (m_vehicle == null)
-                return;
-            m_vehicle.ProcessRotationVehicleParam((Vehicle)qp.param, qp.value);
-        }
-
-        private void changeVehicleFlags(strVehicleBoolParam bp)
-        {
-            if (m_vehicle == null)
-                return;
-            m_vehicle.ProcessVehicleFlags(bp.param, bp.value);
-        }
-
-        #endregion
-
-        public void Move()
-        {
-            if (!childPrim && m_isphysical && Body != IntPtr.Zero &&
-                !m_disabled && !m_isSelected && d.BodyIsEnabled(Body) && !m_building && !m_outbounds)
-            //                  !m_disabled && !m_isSelected && !m_building && !m_outbounds)
-            {
-//                if (!d.BodyIsEnabled(Body)) d.BodyEnable(Body); // KF add 161009
-
-                float timestep = _parent_scene.ODE_STEPSIZE;
-
-                // check outside region
-                d.Vector3 lpos;
-                d.GeomCopyPosition(prim_geom, out lpos); // root position that is seem by rest of simulator
-
-                if (lpos.Z < -100 || lpos.Z > 100000f)
-                {
-                    m_outbounds = true;
-
-                    lpos.Z = Util.Clip(lpos.Z, -100f, 100000f);
-                    _acceleration.X = 0;
-                    _acceleration.Y = 0;
-                    _acceleration.Z = 0;
-
-                    _velocity.X = 0;
-                    _velocity.Y = 0;
-                    _velocity.Z = 0;
-                    m_rotationalVelocity.X = 0;
-                    m_rotationalVelocity.Y = 0;
-                    m_rotationalVelocity.Z = 0;
-
-                    d.BodySetLinearVel(Body, 0, 0, 0); // stop it
-                    d.BodySetAngularVel(Body, 0, 0, 0); // stop it
-                    d.BodySetPosition(Body, lpos.X, lpos.Y, lpos.Z); // put it somewhere 
-                    m_lastposition = _position;
-                    m_lastorientation = _orientation;
-
-                    base.RequestPhysicsterseUpdate();
-
-                    m_throttleUpdates = false;
-                    throttleCounter = 0;
-                    _zeroFlag = true;
-
-                    disableBodySoft(); // disable it and colisions
-                    base.RaiseOutOfBounds(_position);
-                    return;
-                }
-
-                if (lpos.X < 0f)
-                {
-                    _position.X = Util.Clip(lpos.X, -2f, -0.1f);
-                    m_outbounds = true;
-                }
-                else if(lpos.X > _parent_scene.WorldExtents.X)
-                {
-                    _position.X = Util.Clip(lpos.X, _parent_scene.WorldExtents.X + 0.1f, _parent_scene.WorldExtents.X + 2f);
-                    m_outbounds = true;
-                }
-                if (lpos.Y < 0f)
-                {
-                    _position.Y = Util.Clip(lpos.Y, -2f, -0.1f);
-                    m_outbounds = true;
-                }
-                else if(lpos.Y > _parent_scene.WorldExtents.Y)
-                {
-                    _position.Y = Util.Clip(lpos.Y, _parent_scene.WorldExtents.Y + 0.1f, _parent_scene.WorldExtents.Y + 2f);
-                    m_outbounds = true;
-                }
-
-                if(m_outbounds)
-                {
-                    m_lastposition = _position;
-                    m_lastorientation = _orientation;
-
-                    d.Vector3 dtmp = d.BodyGetAngularVel(Body);
-                    m_rotationalVelocity.X = dtmp.X;
-                    m_rotationalVelocity.Y = dtmp.Y;
-                    m_rotationalVelocity.Z = dtmp.Z;
-
-                    dtmp = d.BodyGetLinearVel(Body);
-                    _velocity.X = dtmp.X;
-                    _velocity.Y = dtmp.Y;
-                    _velocity.Z = dtmp.Z;
-
-                    d.BodySetLinearVel(Body, 0, 0, 0); // stop it
-                    d.BodySetAngularVel(Body, 0, 0, 0);
-                    d.GeomSetPosition(prim_geom, _position.X, _position.Y, _position.Z);
-                    disableBodySoft(); // stop collisions
-                    base.RequestPhysicsterseUpdate();
-                    return;
-                }
-
-
-                float fx = 0;
-                float fy = 0;
-                float fz = 0;
-
-                if (m_vehicle != null && m_vehicle.Type != Vehicle.TYPE_NONE)
-                {
-                    // 'VEHICLES' are dealt with in ODEDynamics.cs
-                    m_vehicle.Step();
-                }
-                else
-                {
-                    float m_mass = _mass;
-
-                    //                    fz = 0f;
-                    //m_log.Info(m_collisionFlags.ToString());
-                    if (m_usePID)
-                    {
-
-                        // If the PID Controller isn't active then we set our force
-                        // calculating base velocity to the current position
-
-                        if ((m_PIDTau < 1) && (m_PIDTau != 0))
-                        {
-                            //PID_G = PID_G / m_PIDTau;
-                            m_PIDTau = 1;
-                        }
-
-                        if ((PID_G - m_PIDTau) <= 0)
-                        {
-                            PID_G = m_PIDTau + 1;
-                        }
-
-                        d.Vector3 vel = d.BodyGetLinearVel(Body);
-                        d.Vector3 pos = d.BodyGetPosition(Body);
-                        _target_velocity =
-                            new Vector3(
-                                (m_PIDTarget.X - pos.X) * ((PID_G - m_PIDTau) * timestep),
-                                (m_PIDTarget.Y - pos.Y) * ((PID_G - m_PIDTau) * timestep),
-                                (m_PIDTarget.Z - pos.Z) * ((PID_G - m_PIDTau) * timestep)
-                                );
-
-                        //  if velocity is zero, use position control; otherwise, velocity control
-
-                        if (_target_velocity.ApproxEquals(Vector3.Zero, 0.1f))
-                        {
-                            //  keep track of where we stopped.  No more slippin' & slidin'
-
-                            // We only want to deactivate the PID Controller if we think we want to have our surrogate
-                            // react to the physics scene by moving it's position.
-                            // Avatar to Avatar collisions
-                            // Prim to avatar collisions
-
-                            //fx = (_target_velocity.X - vel.X) * (PID_D) + (_zeroPosition.X - pos.X) * (PID_P * 2);
-                            //fy = (_target_velocity.Y - vel.Y) * (PID_D) + (_zeroPosition.Y - pos.Y) * (PID_P * 2);
-                            //fz = fz + (_target_velocity.Z - vel.Z) * (PID_D) + (_zeroPosition.Z - pos.Z) * PID_P;
-                            d.BodySetPosition(Body, m_PIDTarget.X, m_PIDTarget.Y, m_PIDTarget.Z);
-                            d.BodySetLinearVel(Body, 0, 0, 0);
-                            d.BodyAddForce(Body, 0, 0, fz);
-                            return;
-                        }
-                        else
-                        {
-                            _zeroFlag = false;
-
-                            // We're flying and colliding with something
-                            fx = ((_target_velocity.X) - vel.X) * (PID_D);
-                            fy = ((_target_velocity.Y) - vel.Y) * (PID_D);
-
-                            // vec.Z = (_target_velocity.Z - vel.Z) * PID_D + (_zeroPosition.Z - pos.Z) * PID_P;
-
-                            fz = ((_target_velocity.Z - vel.Z) * (PID_D));
-                        }
-                    }        // end if (m_usePID)
-
-                    // Hover PID Controller needs to be mutually exlusive to MoveTo PID controller
-                    else if (m_useHoverPID)
-                    {
-                        //Console.WriteLine("Hover " +  Name);
-
-                        // If we're using the PID controller, then we have no gravity
-
-                        //  no lock; for now it's only called from within Simulate()
-
-                        // If the PID Controller isn't active then we set our force
-                        // calculating base velocity to the current position
-
-                        if ((m_PIDTau < 1))
-                        {
-                            PID_G = PID_G / m_PIDTau;
-                        }
-
-                        if ((PID_G - m_PIDTau) <= 0)
-                        {
-                            PID_G = m_PIDTau + 1;
-                        }
-
-                        // Where are we, and where are we headed?
-                        d.Vector3 pos = d.BodyGetPosition(Body);
-                        d.Vector3 vel = d.BodyGetLinearVel(Body);
-
-                        //    Non-Vehicles have a limited set of Hover options.
-                        // determine what our target height really is based on HoverType
-                        switch (m_PIDHoverType)
-                        {
-                            case PIDHoverType.Ground:
-                                m_groundHeight = _parent_scene.GetTerrainHeightAtXY(pos.X, pos.Y);
-                                m_targetHoverHeight = m_groundHeight + m_PIDHoverHeight;
-                                break;
-                            case PIDHoverType.GroundAndWater:
-                                m_groundHeight = _parent_scene.GetTerrainHeightAtXY(pos.X, pos.Y);
-                                m_waterHeight = _parent_scene.GetWaterLevel();
-                                if (m_groundHeight > m_waterHeight)
-                                {
-                                    m_targetHoverHeight = m_groundHeight + m_PIDHoverHeight;
-                                }
-                                else
-                                {
-                                    m_targetHoverHeight = m_waterHeight + m_PIDHoverHeight;
-                                }
-                                break;
-
-                        }     // end switch (m_PIDHoverType)
-
-
-                        _target_velocity =
-                            new Vector3(0.0f, 0.0f,
-                                (m_targetHoverHeight - pos.Z) * ((PID_G - m_PIDHoverTau) * timestep)
-                                );
-
-                        //  if velocity is zero, use position control; otherwise, velocity control
-
-                        if (_target_velocity.ApproxEquals(Vector3.Zero, 0.1f))
-                        {
-                            //  keep track of where we stopped.  No more slippin' & slidin'
-
-                            // We only want to deactivate the PID Controller if we think we want to have our surrogate
-                            // react to the physics scene by moving it's position.
-                            // Avatar to Avatar collisions
-                            // Prim to avatar collisions
-
-                            d.BodySetPosition(Body, pos.X, pos.Y, m_targetHoverHeight);
-                            d.BodySetLinearVel(Body, vel.X, vel.Y, 0);
-                            // ?                        d.BodyAddForce(Body, 0, 0, fz);
-                            return;
-                        }
-                        else
-                        {
-                            _zeroFlag = false;
-
-                            // We're flying and colliding with something
-                            fz = ((_target_velocity.Z - vel.Z) * (PID_D));
-                        }
-                    }
-                    else
-                    {
-                        float b = (1.0f - m_buoyancy);
-                        fx = _parent_scene.gravityx * b;
-                        fy = _parent_scene.gravityy * b;
-                        fz = _parent_scene.gravityz * b;
-                    }
-
-                    fx *= m_mass;
-                    fy *= m_mass;
-                    fz *= m_mass;
-
-                    // constant force
-                    fx += m_force.X;
-                    fy += m_force.Y;
-                    fz += m_force.Z;
-
-                    fx += m_forceacc.X;
-                    fy += m_forceacc.Y;
-                    fz += m_forceacc.Z;
-
-                    m_forceacc = Vector3.Zero;
-
-                    //m_log.Info("[OBJPID]: X:" + fx.ToString() + " Y:" + fy.ToString() + " Z:" + fz.ToString());
-                    if (fx != 0 || fy != 0 || fz != 0)
-                    {
-                        d.BodyAddForce(Body, fx, fy, fz);
-                        //Console.WriteLine("AddForce " + fx + "," + fy + "," + fz);
-                    }
-
-                    Vector3 trq;
-
-                    trq = _torque;
-                    trq += m_angularForceacc;
-                    m_angularForceacc = Vector3.Zero;
-                    if (trq.X != 0 || trq.Y != 0 || trq.Z != 0)
-                    {
-                        d.BodyAddTorque(Body, trq.X, trq.Y, trq.Z);
-                    }
-
-                }
-            }
-            else
-            {    // is not physical, or is not a body or is selected
-                //  _zeroPosition = d.BodyGetPosition(Body);
-                return;
-                //Console.WriteLine("Nothing " +  Name);
-
-            }
-        }
-
-
-        public void UpdatePositionAndVelocity(float simulatedtime)
-        {
-            //  no lock; called from Simulate() -- if you call this from elsewhere, gotta lock or do Monitor.Enter/Exit!
-            if (_parent == null && !m_disabled && !m_building && !m_outbounds)
-            {
-                if (Body != IntPtr.Zero)
-                {
-                    Vector3 pv = Vector3.Zero;
-                    bool lastZeroFlag = _zeroFlag;
-
-                    d.Vector3 lpos;
-                    d.GeomCopyPosition(prim_geom, out lpos); // root position that is seem by rest of simulator
-
-
-                    d.Quaternion ori;
-                    d.GeomCopyQuaternion(prim_geom, out ori);
-                    d.Vector3 vel = d.BodyGetLinearVel(Body);
-                    d.Vector3 rotvel = d.BodyGetAngularVel(Body);
-
-                    if ((Math.Abs(m_lastposition.X - lpos.X) < 0.01)
-                        && (Math.Abs(m_lastposition.Y - lpos.Y) < 0.01)
-                        && (Math.Abs(m_lastposition.Z - lpos.Z) < 0.01)
-                        && (Math.Abs(m_lastorientation.X - ori.X) < 0.0001)
-                        && (Math.Abs(m_lastorientation.Y - ori.Y) < 0.0001)
-                        && (Math.Abs(m_lastorientation.Z - ori.Z) < 0.0001)
-                        )
-                    {
-                        _zeroFlag = true;
-                        //Console.WriteLine("ZFT 2");
-                        m_throttleUpdates = false;
-                    }
-                    else
-                    {
-                        //m_log.Debug(Math.Abs(m_lastposition.X - l_position.X).ToString());
-                        _zeroFlag = false;
-                        m_lastUpdateSent = false;
-                        //m_throttleUpdates = false;
-                    }
-
-                    if (_zeroFlag)
-                    {
-                        m_lastposition = _position;
-                        m_lastorientation = _orientation;
-
-                        _velocity.X = 0.0f;
-                        _velocity.Y = 0.0f;
-                        _velocity.Z = 0.0f;
-
-                        _acceleration.X = 0;
-                        _acceleration.Y = 0;
-                        _acceleration.Z = 0;
-
-                        m_rotationalVelocity.X = 0;
-                        m_rotationalVelocity.Y = 0;
-                        m_rotationalVelocity.Z = 0;
-                        if (!m_lastUpdateSent)
-                        {
-                            m_throttleUpdates = false;
-                            throttleCounter = 0;
-                            m_rotationalVelocity = pv;
-
-                            base.RequestPhysicsterseUpdate();
-
-                            m_lastUpdateSent = true;
-                        }
-                    }
-                    else
-                    {
-                        if (lastZeroFlag != _zeroFlag)
-                        {
-                            base.RequestPhysicsterseUpdate();
-                        }
-
-                        m_lastVelocity = _velocity;
-
-                        _position.X = lpos.X;
-                        _position.Y = lpos.Y;
-                        _position.Z = lpos.Z;
-
-                        _velocity.X = vel.X;
-                        _velocity.Y = vel.Y;
-                        _velocity.Z = vel.Z;
-
-                        _orientation.X = ori.X;
-                        _orientation.Y = ori.Y;
-                        _orientation.Z = ori.Z;
-                        _orientation.W = ori.W;
-
-                        _acceleration = ((_velocity - m_lastVelocity) / simulatedtime);
-
-                        if (m_rotationalVelocity.ApproxEquals(pv, 0.0001f))
-                        {
-                            m_rotationalVelocity = pv;
-                        }
-                        else
-                        {
-                            m_rotationalVelocity.X = rotvel.X;
-                            m_rotationalVelocity.Y = rotvel.Y;
-                            m_rotationalVelocity.Z = rotvel.Z;
-                        }
-
-                        m_lastUpdateSent = false;
-                        if (!m_throttleUpdates || throttleCounter > _parent_scene.geomUpdatesPerThrottledUpdate)
-                        {
-                            m_lastposition = _position;
-                            m_lastorientation = _orientation;
-                            base.RequestPhysicsterseUpdate();
-                        }
-                        else
-                        {
-                            throttleCounter++;
-                        }
-                    }
-                }
-                else if (!m_lastUpdateSent || !_zeroFlag)
-                {
-                    // Not a body..   so Make sure the client isn't interpolating
-                    _velocity.X = 0;
-                    _velocity.Y = 0;
-                    _velocity.Z = 0;
-
-                    _acceleration.X = 0;
-                    _acceleration.Y = 0;
-                    _acceleration.Z = 0;
-
-                    m_rotationalVelocity.X = 0;
-                    m_rotationalVelocity.Y = 0;
-                    m_rotationalVelocity.Z = 0;
-                    _zeroFlag = true;
-
-                    if (!m_lastUpdateSent)
-                    {
-                        m_throttleUpdates = false;
-                        throttleCounter = 0;
-
-                        base.RequestPhysicsterseUpdate();
-
-                        m_lastUpdateSent = true;
-                    }
-                }
-            }
-        }
-
-        internal static bool QuaternionIsFinite(Quaternion q)
-        {
-            if (Single.IsNaN(q.X) || Single.IsInfinity(q.X))
-                return false;
-            if (Single.IsNaN(q.Y) || Single.IsInfinity(q.Y))
-                return false;
-            if (Single.IsNaN(q.Z) || Single.IsInfinity(q.Z))
-                return false;
-            if (Single.IsNaN(q.W) || Single.IsInfinity(q.W))
-                return false;
-            return true;
-        }
-
-        internal static void DMassCopy(ref d.Mass src, ref d.Mass dst)
-        {
-            dst.c.W = src.c.W;
-            dst.c.X = src.c.X;
-            dst.c.Y = src.c.Y;
-            dst.c.Z = src.c.Z;
-            dst.mass = src.mass;
-            dst.I.M00 = src.I.M00;
-            dst.I.M01 = src.I.M01;
-            dst.I.M02 = src.I.M02;
-            dst.I.M10 = src.I.M10;
-            dst.I.M11 = src.I.M11;
-            dst.I.M12 = src.I.M12;
-            dst.I.M20 = src.I.M20;
-            dst.I.M21 = src.I.M21;
-            dst.I.M22 = src.I.M22;
-        }
-
-        private static void DMassDup(ref d.Mass src, out d.Mass dst)
-        {
-            dst = new d.Mass { };
-
-            dst.c.W = src.c.W;
-            dst.c.X = src.c.X;
-            dst.c.Y = src.c.Y;
-            dst.c.Z = src.c.Z;
-            dst.mass = src.mass;
-            dst.I.M00 = src.I.M00;
-            dst.I.M01 = src.I.M01;
-            dst.I.M02 = src.I.M02;
-            dst.I.M10 = src.I.M10;
-            dst.I.M11 = src.I.M11;
-            dst.I.M12 = src.I.M12;
-            dst.I.M20 = src.I.M20;
-            dst.I.M21 = src.I.M21;
-            dst.I.M22 = src.I.M22;
-        }
-        private void donullchange()
-        {
-        }
-
-        public bool DoAChange(changes what, object arg)
-        {
-            if (prim_geom == IntPtr.Zero && what != changes.Add && what != changes.Remove)
-            {
-                return false;
-            }
-
-            // nasty switch
-            switch (what)
-            {
-                case changes.Add:
-                    changeadd();
-                    break;
-                case changes.Remove:
-                    //If its being removed, we don't want to rebuild the physical rep at all, so ignore this stuff...
-                    //When we return true, it destroys all of the prims in the linkset anyway
-                    if (_parent != null)
-                    {
-                        OdePrim parent = (OdePrim)_parent;
-                        parent.ChildRemove(this, false);
-                    }
-                    else
-                        ChildRemove(this, false);
-
-                    m_vehicle = null;
-                    RemoveGeom();
-                    m_targetSpace = IntPtr.Zero;
-                    if (m_eventsubscription > 0)
-                        UnSubscribeEvents();
-                    return true;
-
-                case changes.Link:
-                    OdePrim tmp = (OdePrim)arg;
-                    changeLink(tmp);
-                    break;
-
-                case changes.DeLink:
-                    changeLink(null);
-                    break;
-
-                case changes.Position:
-                    changePosition((Vector3)arg);
-                    break;
-
-                case changes.Orientation:
-                    changeOrientation((Quaternion)arg);
-                    break;
-
-                case changes.PosOffset:
-                    donullchange();
-                    break;
-
-                case changes.OriOffset:
-                    donullchange();
-                    break;
-
-                case changes.Velocity:
-                    changevelocity((Vector3)arg);
-                    break;
-
-                //                case changes.Acceleration:
-                //                    changeacceleration((Vector3)arg);
-                //                    break;
-                //                case changes.AngVelocity:
-                //                    changeangvelocity((Vector3)arg);
-                //                    break;
-
-                case changes.Force:
-                    changeForce((Vector3)arg);
-                    break;
-
-                case changes.Torque:
-                    changeSetTorque((Vector3)arg);
-                    break;
-
-                case changes.AddForce:
-                    changeAddForce((Vector3)arg);
-                    break;
-
-                case changes.AddAngForce:
-                    changeAddAngularForce((Vector3)arg);
-                    break;
-
-                case changes.AngLock:
-                    changeAngularLock((Vector3)arg);
-                    break;
-
-                case changes.Size:
-                    changeSize((Vector3)arg);
-                    break;
-
-                case changes.Shape:
-                    changeShape((PrimitiveBaseShape)arg);
-                    break;
-
-                case changes.CollidesWater:
-                    changeFloatOnWater((bool)arg);
-                    break;
-
-                case changes.VolumeDtc:
-                    changeVolumedetetion((bool)arg);
-                    break;
-
-                case changes.Phantom:
-                    changePhantomStatus((bool)arg);
-                    break;
-
-                case changes.Physical:
-                    changePhysicsStatus((bool)arg);
-                    break;
-
-                case changes.Selected:
-                    changeSelectedStatus((bool)arg);
-                    break;
-
-                case changes.disabled:
-                    changeDisable((bool)arg);
-                    break;
-
-                case changes.building:
-                    changeBuilding((bool)arg);
-                    break;
-
-                case changes.VehicleType:
-                    changeVehicleType((int)arg);
-                    break;
-
-                case changes.VehicleFlags:
-                    changeVehicleFlags((strVehicleBoolParam) arg);
-                    break;
-
-                case changes.VehicleFloatParam:
-                    changeVehicleFloatParam((strVehicleFloatParam) arg);
-                    break;
-
-                case changes.VehicleVectorParam:
-                    changeVehicleVectorParam((strVehicleVectorParam) arg);
-                    break;
-
-                case changes.VehicleRotationParam:
-                    changeVehicleRotationParam((strVehicleQuatParam) arg);
-                    break;
-
-                case changes.SetVehicle:
-                    changeSetVehicle((VehicleData) arg);
-                    break;
-                case changes.Null:
-                    donullchange();
-                    break;
-
-                default:
-                    donullchange();
-                    break;
-            }
-            return false;
-        }
-
-        public void AddChange(changes what, object arg)
-        {
-            _parent_scene.AddChange((PhysicsActor) this, what, arg);
-        }
-
-
-        private struct strVehicleBoolParam
-        {
-            public int param;
-            public bool value;
-        }
-
-        private struct strVehicleFloatParam
-        {
-            public int param;
-            public float value;
-        }
-
-        private struct strVehicleQuatParam
-        {
-            public int param;
-            public Quaternion value;
-        }
-
-        private struct strVehicleVectorParam
-        {
-            public int param;
-            public Vector3 value;
-        }
-    }
+/*

+ * Copyright (c) Contributors, http://opensimulator.org/

+ * See CONTRIBUTORS.TXT for a full list of copyright holders.

+ *

+ * Redistribution and use in source and binary forms, with or without

+ * modification, are permitted provided that the following conditions are met:

+ *     * Redistributions of source code must retain the above copyright

+ *       notice, this list of conditions and the following disclaimer.

+ *     * Redistributions in binary form must reproduce the above copyright

+ *       notice, this list of conditions and the following disclaimer in the

+ *       documentation and/or other materials provided with the distribution.

+ *     * Neither the name of the OpenSimulator Project nor the

+ *       names of its contributors may be used to endorse or promote products

+ *       derived from this software without specific prior written permission.

+ *

+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY

+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY

+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;

+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND

+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS

+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

+ */

+

+/* Revision 2011/12 by Ubit Umarov

+ *

+ * 

+ */

+

+/*

+ * Revised August 26 2009 by Kitto Flora. ODEDynamics.cs replaces

+ * ODEVehicleSettings.cs. It and ODEPrim.cs are re-organised:

+ * ODEPrim.cs contains methods dealing with Prim editing, Prim

+ * characteristics and Kinetic motion.

+ * ODEDynamics.cs contains methods dealing with Prim Physical motion

+ * (dynamics) and the associated settings. Old Linear and angular

+ * motors for dynamic motion have been replace with  MoveLinear()

+ * and MoveAngular(); 'Physical' is used only to switch ODE dynamic 

+ * simualtion on/off; VEHICAL_TYPE_NONE/VEHICAL_TYPE_<other> is to

+ * switch between 'VEHICLE' parameter use and general dynamics

+ * settings use.

+ */

+

+//#define SPAM

+

+using System;

+using System.Collections.Generic;

+using System.Reflection;

+using System.Runtime.InteropServices;

+using System.Threading;

+using log4net;

+using OpenMetaverse;

+using OdeAPI;

+using OpenSim.Framework;

+using OpenSim.Region.Physics.Manager;

+

+

+namespace OpenSim.Region.Physics.OdePlugin

+{

+    public class OdePrim : PhysicsActor

+    {

+        private static readonly ILog m_log = LogManager.GetLogger(MethodBase.GetCurrentMethod().DeclaringType);

+

+        private bool m_isphysical;

+        private bool m_fakeisphysical;

+        private bool m_isphantom;

+        private bool m_fakeisphantom;

+

+        protected bool m_building;

+        private Quaternion m_lastorientation = new Quaternion();

+        private Quaternion _orientation;

+

+        private Vector3 _position;

+        private Vector3 _velocity;

+        private Vector3 _torque;

+        private Vector3 m_lastVelocity;

+        private Vector3 m_lastposition;

+        private Vector3 m_rotationalVelocity;

+        private Vector3 _size;

+        private Vector3 _acceleration;

+        private Vector3 m_angularlock = Vector3.One;

+        private IntPtr Amotor = IntPtr.Zero;

+

+        private Vector3 m_force;

+        private Vector3 m_forceacc;

+        private Vector3 m_angularForceacc;

+

+        private Vector3 m_PIDTarget;

+        private float m_PIDTau;

+        private float PID_D = 35f;

+        private float PID_G = 25f;

+        private bool m_usePID;

+

+        // KF: These next 7 params apply to llSetHoverHeight(float height, integer water, float tau),

+        // and are for non-VEHICLES only.

+

+        private float m_PIDHoverHeight;

+        private float m_PIDHoverTau;

+        private bool m_useHoverPID;

+        private PIDHoverType m_PIDHoverType = PIDHoverType.Ground;

+        private float m_targetHoverHeight;

+        private float m_groundHeight;

+        private float m_waterHeight;

+        private float m_buoyancy;                //KF: m_buoyancy should be set by llSetBuoyancy() for non-vehicle. 

+

+        private int body_autodisable_frames = 20;

+

+        private const CollisionCategories m_default_collisionFlags = (CollisionCategories.Geom

+                                                        | CollisionCategories.Space

+                                                        | CollisionCategories.Body

+                                                        | CollisionCategories.Character

+                                                        );

+//        private bool m_collidesLand = true;

+        private bool m_collidesWater;

+        public bool m_returnCollisions;

+        private bool m_softcolide;

+

+        private bool m_NoColide;  // for now only for internal use for bad meshs

+

+        // Default we're a Geometry

+        private CollisionCategories m_collisionCategories = (CollisionCategories.Geom);

+

+        // Default, Collide with Other Geometries, spaces and Bodies

+        private CollisionCategories m_collisionFlags = m_default_collisionFlags;

+

+        public bool m_disabled;

+

+

+        public uint m_localID;

+

+        private PrimitiveBaseShape _pbs;

+        public OdeScene _parent_scene;

+

+        /// <summary>

+        /// The physics space which contains prim geometry

+        /// </summary>

+        public IntPtr m_targetSpace = IntPtr.Zero;

+

+        public IntPtr prim_geom;

+        public IntPtr _triMeshData;

+

+        private PhysicsActor _parent;

+

+        private List<OdePrim> childrenPrim = new List<OdePrim>();

+

+        private bool m_iscolliding;

+

+        public bool m_isSelected;

+        private bool m_delaySelect;

+        private bool m_lastdoneSelected;

+        public bool m_outbounds;

+

+        internal bool m_isVolumeDetect; // If true, this prim only detects collisions but doesn't collide actively

+

+        private bool m_throttleUpdates;

+        private int throttleCounter;

+        public float m_collisionscore;

+        int m_colliderfilter = 0;

+

+        public IntPtr collide_geom; // for objects: geom if single prim space it linkset

+

+        private float m_density = 10.000006836f; // Aluminum g/cm3;

+        private byte m_shapetype;

+        public bool _zeroFlag;

+        private bool m_lastUpdateSent;

+

+        public IntPtr Body = IntPtr.Zero;

+        public String Name { get; private set; }

+        private Vector3 _target_velocity;

+

+        public Vector3 primOOBsize; // prim real dimensions from mesh 

+        public Vector3 primOOBoffset; // its centroid out of mesh or rest aabb

+        public float primOOBradiusSQ;

+        public d.Mass primdMass; // prim inertia information on it's own referencial

+        float primMass; // prim own mass

+        float _mass; // object mass acording to case

+        private bool hasOOBoffsetFromMesh = false; // if true we did compute it form mesh centroid, else from aabb

+

+        public int givefakepos = 0;

+        private Vector3 fakepos;

+        public int givefakeori = 0;

+        private Quaternion fakeori;

+

+        public int m_eventsubscription;

+        private CollisionEventUpdate CollisionEventsThisFrame = new CollisionEventUpdate();

+

+        public volatile bool childPrim;

+

+        public ODEDynamics m_vehicle;

+

+        internal int m_material = (int)Material.Wood;

+        private float mu;

+        private float bounce;

+

+        /// <summary>

+        /// Is this prim subject to physics?  Even if not, it's still solid for collision purposes.

+        /// </summary>

+        public override bool IsPhysical  // this is not reliable for internal use

+        {

+            get { return m_fakeisphysical; }

+            set

+            {

+                m_fakeisphysical = value; // we show imediatly to outside that we changed physical

+                // and also to stop imediatly some updates

+                // but real change will only happen in taintprocessing

+

+                if (!value) // Zero the remembered last velocity

+                    m_lastVelocity = Vector3.Zero;

+                AddChange(changes.Physical, value);

+            }

+        }

+

+        public override bool Phantom  // this is not reliable for internal use

+        {

+            get { return m_fakeisphantom; }

+            set

+            {

+                m_fakeisphantom = value; // we show imediatly to outside that we changed physical

+                // and also to stop imediatly some updates

+                // but real change will only happen in taintprocessing

+

+                AddChange(changes.Phantom, value);

+            }

+        }

+

+        public override bool Building  // this is not reliable for internal use

+        {

+            get { return m_building; }

+            set

+            {

+                if (value)

+                    m_building = true;

+                AddChange(changes.building, value);

+            }

+        }

+

+        public override void getContactData(ref ContactData cdata)

+        {

+            cdata.mu = mu;

+            cdata.bounce = bounce;

+

+            //            cdata.softcolide = m_softcolide;

+            cdata.softcolide = false;

+

+            if (m_isphysical)

+            {

+                ODEDynamics veh;

+                if (_parent != null)

+                    veh = ((OdePrim)_parent).m_vehicle;

+                else

+                    veh = m_vehicle;

+

+                if (veh != null && veh.Type != Vehicle.TYPE_NONE)

+                    cdata.mu *= veh.FrictionFactor;

+            }

+        }    

+

+        public override int PhysicsActorType

+        {

+            get { return (int)ActorTypes.Prim; }

+            set { return; }

+        }

+

+        public override bool SetAlwaysRun

+        {

+            get { return false; }

+            set { return; }

+        }

+

+        public override uint LocalID

+        {

+            get

+            {

+                return m_localID;

+            }

+            set

+            {

+                //m_log.Info("[PHYSICS]: Setting TrackerID: " + value);

+                m_localID = value;

+            }

+        }

+

+        public override bool Grabbed

+        {

+            set { return; }

+        }

+

+        public override bool Selected

+        {

+            set

+            {

+                if (value)

+                    m_isSelected = value; // if true set imediatly to stop moves etc

+                AddChange(changes.Selected, value);

+            }

+        }

+

+        public override bool Flying

+        {

+            // no flying prims for you

+            get { return false; }

+            set { }

+        }

+

+        public override bool IsColliding

+        {

+            get { return m_iscolliding; }

+            set

+            {

+                if (value)

+                {

+                    m_colliderfilter += 2;

+                    if (m_colliderfilter > 2)

+                        m_colliderfilter = 2;

+                }

+                else

+                {

+                    m_colliderfilter--;

+                    if (m_colliderfilter < 0)

+                        m_colliderfilter = 0;

+                }

+

+                if (m_colliderfilter == 0)

+                {

+                    m_softcolide = false;

+                    m_iscolliding = false;

+                }

+                else

+                    m_iscolliding = true;

+            }

+        }

+

+        public override bool CollidingGround

+        {

+            get { return false; }

+            set { return; }

+        }

+

+        public override bool CollidingObj

+        {

+            get { return false; }

+            set { return; }

+        }

+

+        public override bool ThrottleUpdates

+        {

+            get { return m_throttleUpdates; }

+            set { m_throttleUpdates = value; }

+        }

+

+        public override bool Stopped

+        {

+            get { return _zeroFlag; }

+        }

+

+        public override Vector3 Position

+        {

+            get

+            {

+                if (givefakepos > 0)

+                    return fakepos;

+                else

+                    return _position;

+            }

+

+            set

+            {

+                fakepos = value;

+                givefakepos++;

+                AddChange(changes.Position, value);

+            }

+        }

+

+        public override Vector3 Size

+        {

+            get { return _size; }

+            set

+            {

+                if (value.IsFinite())

+                {

+                    AddChange(changes.Size, value);

+                }

+                else

+                {

+                    m_log.WarnFormat("[PHYSICS]: Got NaN Size on object {0}", Name);

+                }

+            }

+        }

+

+        public override float Mass

+        {

+            get { return _mass; }

+        }

+

+        public override Vector3 Force

+        {

+            //get { return Vector3.Zero; }

+            get { return m_force; }

+            set

+            {

+                if (value.IsFinite())

+                {

+                    AddChange(changes.Force, value);

+                }

+                else

+                {

+                    m_log.WarnFormat("[PHYSICS]: NaN in Force Applied to an Object {0}", Name);

+                }

+            }

+        }

+

+        public override void SetVolumeDetect(int param)

+        {

+            AddChange(changes.VolumeDtc, (param != 0));

+        }

+

+        public override Vector3 GeometricCenter

+        {

+            get

+            {

+                return Vector3.Zero;

+            }

+        }

+

+        public override Vector3 CenterOfMass

+        {

+            get

+            {

+                d.Vector3 dtmp;

+                if (IsPhysical && !childPrim && Body != IntPtr.Zero)

+                {

+                    dtmp = d.BodyGetPosition(Body);

+                    return new Vector3(dtmp.X, dtmp.Y, dtmp.Z);

+                }

+                else if (prim_geom != IntPtr.Zero)

+                {

+                    d.Quaternion dq;

+                    d.GeomCopyQuaternion(prim_geom, out dq);

+                    Quaternion q;

+                    q.X = dq.X;

+                    q.Y = dq.Y;

+                    q.Z = dq.Z;

+                    q.W = dq.W;

+

+                    Vector3 vtmp = primOOBoffset * q;

+                    dtmp = d.GeomGetPosition(prim_geom);

+                    return new Vector3(dtmp.X + vtmp.X, dtmp.Y + vtmp.Y, dtmp.Z + vtmp.Z);

+                }

+                else

+                    return Vector3.Zero;

+            }

+        }

+        /*

+                public override Vector3 PrimOOBsize

+                    {

+                    get

+                        {

+                        return primOOBsize;

+                        }

+                    }

+

+                public override Vector3 PrimOOBoffset

+                    {

+                    get

+                        {

+                        return primOOBoffset;

+                        }

+                    }

+

+                public override float PrimOOBRadiusSQ

+                    {

+                    get

+                        {

+                        return primOOBradiusSQ;

+                        }

+                    }

+        */

+        public override PrimitiveBaseShape Shape

+        {

+            set

+            {

+                AddChange(changes.Shape, value);

+            }

+        }

+

+        public override byte PhysicsShapeType

+        {

+            get

+            {

+                return m_shapetype;

+            }

+            set

+            {

+                m_shapetype = value;

+                AddChange(changes.Shape, null);

+            }

+        }


+

+        public override Vector3 Velocity

+        {

+            get

+            {

+                if (_zeroFlag)

+                    return Vector3.Zero;

+                return _velocity;

+            }

+            set

+            {

+                if (value.IsFinite())

+                {

+                    AddChange(changes.Velocity, value);

+                    //                    _velocity = value;

+

+                }

+                else

+                {

+                    m_log.WarnFormat("[PHYSICS]: Got NaN Velocity in Object {0}", Name);

+                }

+

+            }

+        }

+

+        public override Vector3 Torque

+        {

+            get

+            {

+                if (!IsPhysical || Body == IntPtr.Zero)

+                    return Vector3.Zero;

+

+                return _torque;

+            }

+

+            set

+            {

+                if (value.IsFinite())

+                {

+                    AddChange(changes.Torque, value);

+                }

+                else

+                {

+                    m_log.WarnFormat("[PHYSICS]: Got NaN Torque in Object {0}", Name);

+                }

+            }

+        }

+

+        public override float CollisionScore

+        {

+            get { return m_collisionscore; }

+            set { m_collisionscore = value; }

+        }

+

+        public override bool Kinematic

+        {

+            get { return false; }

+            set { }

+        }

+

+        public override Quaternion Orientation

+        {

+            get

+            {

+                if (givefakeori > 0)

+                    return fakeori;

+                else

+

+                    return _orientation;

+            }

+            set

+            {

+                if (QuaternionIsFinite(value))

+                {

+                    fakeori = value;

+                    givefakeori++;

+                    AddChange(changes.Orientation, value);

+                }

+                else

+                    m_log.WarnFormat("[PHYSICS]: Got NaN quaternion Orientation from Scene in Object {0}", Name);

+

+            }

+        }

+

+        public override Vector3 Acceleration

+        {

+            get { return _acceleration; }

+            set { }

+        }

+

+        public override Vector3 RotationalVelocity

+        {

+            get

+            {

+                Vector3 pv = Vector3.Zero;

+                if (_zeroFlag)

+                    return pv;

+                m_lastUpdateSent = false;

+

+                if (m_rotationalVelocity.ApproxEquals(pv, 0.0001f))

+                    return pv;

+

+                return m_rotationalVelocity;

+            }

+            set

+            {

+                if (value.IsFinite())

+                {

+                    m_rotationalVelocity = value;

+                    if (Body != IntPtr.Zero && !d.BodyIsEnabled(Body))

+                        d.BodyEnable(Body);

+                }

+                else

+                {

+                    m_log.WarnFormat("[PHYSICS]: Got NaN RotationalVelocity in Object {0}", Name);

+                }

+            }

+        }

+

+

+        public override float Buoyancy

+        {

+            get { return m_buoyancy; }

+            set

+            {

+                m_buoyancy = value;

+            }

+        }

+

+        public override bool FloatOnWater

+        {

+            set

+            {

+                AddChange(changes.CollidesWater, value);

+            }

+        }

+

+        public override Vector3 PIDTarget

+        {

+            set

+            {

+                if (value.IsFinite())

+                {

+                    m_PIDTarget = value;

+                }

+                else

+                    m_log.WarnFormat("[PHYSICS]: Got NaN PIDTarget from Scene on Object {0}", Name);

+            }

+        }

+

+        public override bool PIDActive { set { m_usePID = value; } }

+        public override float PIDTau { set { m_PIDTau = value; } }

+

+        public override float PIDHoverHeight { set { m_PIDHoverHeight = value; ; } }

+        public override bool PIDHoverActive { set { m_useHoverPID = value; } }

+        public override PIDHoverType PIDHoverType { set { m_PIDHoverType = value; } }

+        public override float PIDHoverTau { set { m_PIDHoverTau = value; } }

+

+        public override Quaternion APIDTarget { set { return; } }

+

+        public override bool APIDActive { set { return; } }

+

+        public override float APIDStrength { set { return; } }

+

+        public override float APIDDamping { set { return; } }

+

+        public override int VehicleType

+        {

+            // we may need to put a fake on this

+            get

+            {

+                if (m_vehicle == null)

+                    return (int)Vehicle.TYPE_NONE;

+                else

+                    return (int)m_vehicle.Type;

+            }

+            set

+            {

+                AddChange(changes.VehicleType, value);

+            }

+        }

+

+        public override void VehicleFloatParam(int param, float value)

+        {

+            strVehicleFloatParam fp = new strVehicleFloatParam();

+            fp.param = param;

+            fp.value = value;

+            AddChange(changes.VehicleFloatParam, fp);

+        }

+

+        public override void VehicleVectorParam(int param, Vector3 value)

+        {

+            strVehicleVectorParam fp = new strVehicleVectorParam();

+            fp.param = param;

+            fp.value = value;

+            AddChange(changes.VehicleVectorParam, fp);

+        }

+

+        public override void VehicleRotationParam(int param, Quaternion value)

+        {

+            strVehicleQuatParam fp = new strVehicleQuatParam();

+            fp.param = param;

+            fp.value = value;

+            AddChange(changes.VehicleRotationParam, fp);

+        }

+

+        public override void VehicleFlags(int param, bool value)

+        {

+            strVehicleBoolParam bp = new strVehicleBoolParam();

+            bp.param = param;

+            bp.value = value;

+            AddChange(changes.VehicleFlags, bp);

+        }

+

+        public override void SetVehicle(object vdata)

+        {

+            AddChange(changes.SetVehicle, vdata);

+        }

+        public void SetAcceleration(Vector3 accel)

+        {

+            _acceleration = accel;

+        }

+

+        public override void AddForce(Vector3 force, bool pushforce)

+        {

+            if (force.IsFinite())

+            {

+                AddChange(changes.AddForce, force / _parent_scene.ODE_STEPSIZE);

+            }

+            else

+            {

+                m_log.WarnFormat("[PHYSICS]: Got Invalid linear force vector from Scene in Object {0}", Name);

+            }

+            //m_log.Info("[PHYSICS]: Added Force:" + force.ToString() +  " to prim at " + Position.ToString());

+        }

+

+        public override void AddAngularForce(Vector3 force, bool pushforce)

+        {

+            if (force.IsFinite())

+            {

+                AddChange(changes.AddAngForce, force / _parent_scene.ODE_STEPSIZE);

+            }

+            else

+            {

+                m_log.WarnFormat("[PHYSICS]: Got Invalid Angular force vector from Scene in Object {0}", Name);

+            }

+        }

+

+        public override void CrossingFailure()

+        {

+            if (m_outbounds)

+            {

+                _position.X = Util.Clip(_position.X, 0.5f, _parent_scene.WorldExtents.X - 0.5f);

+                _position.Y = Util.Clip(_position.Y, 0.5f, _parent_scene.WorldExtents.Y - 0.5f);

+                _position.Z = Util.Clip(_position.Z + 0.2f, -100f, 50000f);

+

+                m_lastposition = _position;

+                _velocity.X = 0;

+                _velocity.Y = 0;

+                _velocity.Z = 0;

+

+                m_lastVelocity = _velocity;

+                if (m_vehicle != null && m_vehicle.Type != Vehicle.TYPE_NONE)

+                    m_vehicle.Stop();

+

+                if(Body != IntPtr.Zero)

+                    d.BodySetLinearVel(Body, 0, 0, 0); // stop it

+                if (prim_geom != IntPtr.Zero)

+                    d.GeomSetPosition(prim_geom, _position.X, _position.Y, _position.Z);

+

+                m_outbounds = false;

+                changeDisable(false);

+                base.RequestPhysicsterseUpdate();

+            }

+        }

+

+        public override void SetMomentum(Vector3 momentum)

+        {

+        }

+

+        public override void SetMaterial(int pMaterial)

+        {

+            m_material = pMaterial;

+            mu = _parent_scene.m_materialContactsData[pMaterial].mu;

+            bounce = _parent_scene.m_materialContactsData[pMaterial].bounce;

+        }

+

+        public void setPrimForRemoval()

+        {

+            AddChange(changes.Remove, null);

+        }

+

+        public override void link(PhysicsActor obj)

+        {

+            AddChange(changes.Link, obj);

+        }

+

+        public override void delink()

+        {

+            AddChange(changes.DeLink, null);

+        }

+

+        public override void LockAngularMotion(Vector3 axis)

+        {

+            // reverse the zero/non zero values for ODE.

+            if (axis.IsFinite())

+            {

+                axis.X = (axis.X > 0) ? 1f : 0f;

+                axis.Y = (axis.Y > 0) ? 1f : 0f;

+                axis.Z = (axis.Z > 0) ? 1f : 0f;

+                m_log.DebugFormat("[axislock]: <{0},{1},{2}>", axis.X, axis.Y, axis.Z);

+                AddChange(changes.AngLock, axis);

+            }

+            else

+            {

+                m_log.WarnFormat("[PHYSICS]: Got NaN locking axis from Scene on Object {0}", Name);

+            }

+        }

+

+        public override void SubscribeEvents(int ms)

+        {

+            m_eventsubscription = ms;

+            _parent_scene.AddCollisionEventReporting(this);

+        }

+

+        public override void UnSubscribeEvents()

+        {

+            _parent_scene.RemoveCollisionEventReporting(this);

+            m_eventsubscription = 0;

+        }

+

+        public void AddCollisionEvent(uint CollidedWith, ContactPoint contact)

+        {

+            if (CollisionEventsThisFrame == null)

+                CollisionEventsThisFrame = new CollisionEventUpdate();

+

+            CollisionEventsThisFrame.AddCollider(CollidedWith, contact);

+        }

+

+        public void SendCollisions()

+        {

+            if (CollisionEventsThisFrame == null)

+                return;

+

+            base.SendCollisionUpdate(CollisionEventsThisFrame);

+

+            if (CollisionEventsThisFrame.m_objCollisionList.Count == 0)

+                CollisionEventsThisFrame = null;

+            else

+                CollisionEventsThisFrame = new CollisionEventUpdate();

+        }

+

+        public override bool SubscribedEvents()

+        {

+            if (m_eventsubscription > 0)

+                return true;

+            return false;

+        }

+

+

+        public OdePrim(String primName, OdeScene parent_scene, Vector3 pos, Vector3 size,

+                       Quaternion rotation, PrimitiveBaseShape pbs, bool pisPhysical,bool pisPhantom,byte _shapeType,uint plocalID)

+        {

+            Name = primName;

+            LocalID = plocalID;

+

+            m_vehicle = null;

+

+            if (!pos.IsFinite())

+            {

+                pos = new Vector3(((float)Constants.RegionSize * 0.5f), ((float)Constants.RegionSize * 0.5f),

+                    parent_scene.GetTerrainHeightAtXY(((float)Constants.RegionSize * 0.5f), ((float)Constants.RegionSize * 0.5f)) + 0.5f);

+                m_log.WarnFormat("[PHYSICS]: Got nonFinite Object create Position for {0}", Name);

+            }

+            _position = pos;

+            givefakepos = 0;

+

+            PID_D = parent_scene.bodyPIDD;

+            PID_G = parent_scene.bodyPIDG;

+            m_density = parent_scene.geomDefaultDensity;

+            // m_tensor = parent_scene.bodyMotorJointMaxforceTensor;

+            body_autodisable_frames = parent_scene.bodyFramesAutoDisable;

+

+            prim_geom = IntPtr.Zero;

+            collide_geom = IntPtr.Zero;

+            Body = IntPtr.Zero;

+

+            if (!size.IsFinite())

+            {

+                size = new Vector3(0.5f, 0.5f, 0.5f);

+                m_log.WarnFormat("[PHYSICS]: Got nonFinite Object create Size for {0}", Name);

+            }

+

+            if (size.X <= 0) size.X = 0.01f;

+            if (size.Y <= 0) size.Y = 0.01f;

+            if (size.Z <= 0) size.Z = 0.01f;

+

+            _size = size;

+

+            if (!QuaternionIsFinite(rotation))

+            {

+                rotation = Quaternion.Identity;

+                m_log.WarnFormat("[PHYSICS]: Got nonFinite Object create Rotation for {0}", Name);

+            }

+

+            _orientation = rotation;

+            givefakeori = 0;

+

+            _pbs = pbs;

+

+            _parent_scene = parent_scene;

+            m_targetSpace = IntPtr.Zero;

+

+            if (pos.Z < 0)

+            {

+                m_isphysical = false;

+            }

+            else

+            {

+                m_isphysical = pisPhysical;

+            }

+            m_fakeisphysical = m_isphysical;

+

+            m_isVolumeDetect = false;

+

+            m_force = Vector3.Zero;

+

+            m_iscolliding = false;

+            m_colliderfilter = 0;

+            m_softcolide = true;

+            m_NoColide = false;

+

+            hasOOBoffsetFromMesh = false;

+            _triMeshData = IntPtr.Zero;

+

+            m_shapetype = _shapeType;

+

+            m_lastdoneSelected = false;

+            m_isSelected = false;

+            m_delaySelect = false;

+

+            m_isphantom = pisPhantom;

+            m_fakeisphantom = pisPhantom;

+

+            mu = parent_scene.m_materialContactsData[(int)Material.Wood].mu;

+            bounce = parent_scene.m_materialContactsData[(int)Material.Wood].bounce;

+

+            CalcPrimBodyData();

+

+            m_building = true; // control must set this to false when done

+

+            AddChange(changes.Add, null);

+        }

+

+        private void resetCollisionAccounting()

+        {

+            m_collisionscore = 0;

+        }

+

+        private void createAMotor(Vector3 axis)

+        {

+            if (Body == IntPtr.Zero)

+                return;

+

+            if (Amotor != IntPtr.Zero)

+            {

+                d.JointDestroy(Amotor);

+                Amotor = IntPtr.Zero;

+            }

+

+            int axisnum = 3 - (int)(axis.X + axis.Y + axis.Z);

+

+            if (axisnum <= 0)

+                return;

+

+            // stop it

+            d.BodySetTorque(Body, 0, 0, 0);

+            d.BodySetAngularVel(Body, 0, 0, 0);

+

+            Amotor = d.JointCreateAMotor(_parent_scene.world, IntPtr.Zero);

+            d.JointAttach(Amotor, Body, IntPtr.Zero);

+

+            d.JointSetAMotorMode(Amotor, 0);

+

+            d.JointSetAMotorNumAxes(Amotor, axisnum);

+

+            // get current orientation to lock

+

+            d.Quaternion dcur = d.BodyGetQuaternion(Body);

+            Quaternion curr; // crap convertion between identical things

+            curr.X = dcur.X;

+            curr.Y = dcur.Y;

+            curr.Z = dcur.Z;

+            curr.W = dcur.W;

+            Vector3 ax;

+

+            int i = 0;

+            int j = 0;

+            if (axis.X == 0)

+            {

+                ax = (new Vector3(1, 0, 0)) * curr; // rotate world X to current local X

+                // ODE should do this  with axis relative to body 1 but seems to fail

+                d.JointSetAMotorAxis(Amotor, 0, 0, ax.X, ax.Y, ax.Z);

+                d.JointSetAMotorAngle(Amotor, 0, 0);

+                d.JointSetAMotorParam(Amotor, (int)d.JointParam.LoStop, -0.000001f);

+                d.JointSetAMotorParam(Amotor, (int)d.JointParam.HiStop, 0.000001f);

+                d.JointSetAMotorParam(Amotor, (int)d.JointParam.Vel, 0);

+                d.JointSetAMotorParam(Amotor, (int)d.JointParam.FudgeFactor, 0.0001f);

+                d.JointSetAMotorParam(Amotor, (int)d.JointParam.Bounce, 0f);

+                d.JointSetAMotorParam(Amotor, (int)d.JointParam.FMax, 5e8f);

+                d.JointSetAMotorParam(Amotor, (int)d.JointParam.StopCFM, 0f);

+                d.JointSetAMotorParam(Amotor, (int)d.JointParam.StopERP, 0.8f);

+                i++;

+                j = 256; // move to next axis set

+            }

+

+            if (axis.Y == 0)

+            {

+                ax = (new Vector3(0, 1, 0)) * curr;

+                d.JointSetAMotorAxis(Amotor, i, 0, ax.X, ax.Y, ax.Z);

+                d.JointSetAMotorAngle(Amotor, i, 0);

+                d.JointSetAMotorParam(Amotor, j + (int)d.JointParam.LoStop, -0.000001f);

+                d.JointSetAMotorParam(Amotor, j + (int)d.JointParam.HiStop, 0.000001f);

+                d.JointSetAMotorParam(Amotor, j + (int)d.JointParam.Vel, 0);

+                d.JointSetAMotorParam(Amotor, j + (int)d.JointParam.FudgeFactor, 0.0001f);

+                d.JointSetAMotorParam(Amotor, j + (int)d.JointParam.Bounce, 0f);

+                d.JointSetAMotorParam(Amotor, j + (int)d.JointParam.FMax, 5e8f);

+                d.JointSetAMotorParam(Amotor, j + (int)d.JointParam.StopCFM, 0f);

+                d.JointSetAMotorParam(Amotor, j + (int)d.JointParam.StopERP, 0.8f);

+                i++;

+                j += 256;

+            }

+

+            if (axis.Z == 0)

+            {

+                ax = (new Vector3(0, 0, 1)) * curr;

+                d.JointSetAMotorAxis(Amotor, i, 0, ax.X, ax.Y, ax.Z);

+                d.JointSetAMotorAngle(Amotor, i, 0);

+                d.JointSetAMotorParam(Amotor, j + (int)d.JointParam.LoStop, -0.000001f);

+                d.JointSetAMotorParam(Amotor, j + (int)d.JointParam.HiStop, 0.000001f);

+                d.JointSetAMotorParam(Amotor, j + (int)d.JointParam.Vel, 0);

+                d.JointSetAMotorParam(Amotor, j + (int)d.JointParam.FudgeFactor, 0.0001f);

+                d.JointSetAMotorParam(Amotor, j + (int)d.JointParam.Bounce, 0f);

+                d.JointSetAMotorParam(Amotor, j + (int)d.JointParam.FMax, 5e8f);

+                d.JointSetAMotorParam(Amotor, j + (int)d.JointParam.StopCFM, 0f);

+                d.JointSetAMotorParam(Amotor, j + (int)d.JointParam.StopERP, 0.8f);

+            }

+        }

+

+        private bool setMesh(OdeScene parent_scene)

+        {

+            if (Body != IntPtr.Zero)

+            {

+                if (childPrim)

+                {

+                    if (_parent != null)

+                    {

+                        OdePrim parent = (OdePrim)_parent;

+                        parent.ChildDelink(this, false);

+                    }

+                }

+                else

+                {

+                    DestroyBody();

+                }

+            }

+

+            bool convex;

+            if (m_shapetype == 0)

+                convex = false;

+            else

+                convex = true;

+

+            IMesh mesh = _parent_scene.mesher.CreateMesh(Name, _pbs, _size, (int)LevelOfDetail.High, true,convex);

+            if (mesh == null)

+            {

+                m_log.WarnFormat("[PHYSICS]: CreateMesh Failed on prim {0} at <{1},{2},{3}>.", Name, _position.X, _position.Y, _position.Z);

+                return false;

+            }

+

+            IntPtr vertices, indices;

+            int vertexCount, indexCount;

+            int vertexStride, triStride;

+

+            mesh.getVertexListAsPtrToFloatArray(out vertices, out vertexStride, out vertexCount); // Note, that vertices are fixed in unmanaged heap

+            mesh.getIndexListAsPtrToIntArray(out indices, out triStride, out indexCount); // Also fixed, needs release after usage

+

+            if (vertexCount == 0 || indexCount == 0)

+            {

+                m_log.WarnFormat("[PHYSICS]: Got invalid mesh on prim {0} at <{1},{2},{3}>. mesh UUID {4}",

+                    Name, _position.X, _position.Y, _position.Z, _pbs.SculptTexture.ToString());

+                mesh.releaseSourceMeshData();

+                return false;

+            }

+

+            primOOBoffset = mesh.GetCentroid();

+            hasOOBoffsetFromMesh = true;

+

+            mesh.releaseSourceMeshData();

+

+            IntPtr geo = IntPtr.Zero;

+

+            try

+            {

+                _triMeshData = d.GeomTriMeshDataCreate();

+

+                d.GeomTriMeshDataBuildSimple(_triMeshData, vertices, vertexStride, vertexCount, indices, indexCount, triStride);

+                d.GeomTriMeshDataPreprocess(_triMeshData);

+

+                _parent_scene.waitForSpaceUnlock(m_targetSpace);

+                geo = d.CreateTriMesh(m_targetSpace, _triMeshData, null, null, null);

+            }

+

+            catch (Exception e)

+            {

+                m_log.ErrorFormat("[PHYSICS]: SetGeom Mesh failed for {0} exception: {1}", Name, e);

+                if (_triMeshData != IntPtr.Zero)

+                {

+                    d.GeomTriMeshDataDestroy(_triMeshData);

+                    _triMeshData = IntPtr.Zero;

+                }

+                return false;

+            }

+

+            SetGeom(geo);

+            return true;

+        }

+

+        private void SetGeom(IntPtr geom)

+        {

+            prim_geom = geom;

+            //Console.WriteLine("SetGeom to " + prim_geom + " for " + Name);

+            if (prim_geom != IntPtr.Zero)

+            {

+                if (m_NoColide)

+                {

+                    d.GeomSetCategoryBits(prim_geom, 0);

+                    if (m_isphysical)

+                    {

+                        d.GeomSetCollideBits(prim_geom, (int)CollisionCategories.Land);

+                    }

+                    else

+                    {

+                        d.GeomSetCollideBits(prim_geom, 0);

+                        d.GeomDisable(prim_geom);

+                    }

+                }

+                else

+                {

+                    d.GeomSetCategoryBits(prim_geom, (int)m_collisionCategories);

+                    d.GeomSetCollideBits(prim_geom, (int)m_collisionFlags);

+                }

+

+                CalcPrimBodyData();

+

+                _parent_scene.geom_name_map[prim_geom] = Name;

+                _parent_scene.actor_name_map[prim_geom] = this;

+

+            }

+            else

+                m_log.Warn("Setting bad Geom");

+        }

+

+

+        /// <summary>

+        /// Create a geometry for the given mesh in the given target space.

+        /// </summary>

+        /// <param name="m_targetSpace"></param>

+        /// <param name="mesh">If null, then a mesh is used that is based on the profile shape data.</param>

+        private void CreateGeom()

+        {

+            if (_triMeshData != IntPtr.Zero)

+            {

+                d.GeomTriMeshDataDestroy(_triMeshData);

+                _triMeshData = IntPtr.Zero;

+            }

+

+            bool haveMesh = false;

+            hasOOBoffsetFromMesh = false;

+            m_NoColide = false;

+

+            if (_parent_scene.needsMeshing(_pbs))

+            {

+                haveMesh = setMesh(_parent_scene); // this will give a mesh to non trivial known prims

+                if (!haveMesh)

+                    m_NoColide = true;

+            }

+

+            if (!haveMesh)

+            {

+                if (_pbs.ProfileShape == ProfileShape.HalfCircle && _pbs.PathCurve == (byte)Extrusion.Curve1

+                    && _size.X == _size.Y && _size.Y == _size.Z)

+                { // it's a sphere

+                    _parent_scene.waitForSpaceUnlock(m_targetSpace);

+                    try

+                    {

+                        SetGeom(d.CreateSphere(m_targetSpace, _size.X * 0.5f));

+                    }

+                    catch (Exception e)

+                    {

+                        m_log.WarnFormat("[PHYSICS]: Create sphere failed: {0}", e);

+                        return;

+                    }

+                }

+                else

+                {// do it as a box

+                    _parent_scene.waitForSpaceUnlock(m_targetSpace);

+                    try

+                    {

+                        //Console.WriteLine("  CreateGeom 4");

+                        SetGeom(d.CreateBox(m_targetSpace, _size.X, _size.Y, _size.Z));

+                    }

+                    catch (Exception e)

+                    {

+                        m_log.Warn("[PHYSICS]: Create box failed: {0}", e);

+                        return;

+                    }

+                }

+            }

+        }

+

+        /// <summary>

+        /// Set a new geometry for this prim.

+        /// </summary>

+        /// <param name="geom"></param>

+        private void RemoveGeom()

+        {

+            if (prim_geom != IntPtr.Zero)

+            {

+                _parent_scene.geom_name_map.Remove(prim_geom);

+                _parent_scene.actor_name_map.Remove(prim_geom);

+                try

+                {

+                    d.GeomDestroy(prim_geom);

+                    if (_triMeshData != IntPtr.Zero)

+                    {

+                        d.GeomTriMeshDataDestroy(_triMeshData);

+                        _triMeshData = IntPtr.Zero;

+                    }

+                }

+                //                catch (System.AccessViolationException)

+                catch (Exception e)

+                {

+                    m_log.ErrorFormat("[PHYSICS]: PrimGeom destruction failed for {0} exception {1}", Name, e);

+                }

+

+                prim_geom = IntPtr.Zero;

+            }

+            else

+            {

+                m_log.ErrorFormat("[PHYSICS]: PrimGeom destruction BAD {0}", Name);

+            }

+            Body = IntPtr.Zero;

+            hasOOBoffsetFromMesh = false;

+            CalcPrimBodyData();

+        }

+

+        private void ChildSetGeom(OdePrim odePrim)

+        {

+            // well.. 

+            DestroyBody();

+            MakeBody();

+        }

+

+        //sets non physical prim m_targetSpace to right space in spaces grid for static prims

+        // should only be called for non physical prims unless they are becoming non physical

+        private void SetInStaticSpace(OdePrim prim)

+        {

+            IntPtr targetSpace = _parent_scene.MoveGeomToStaticSpace(prim.prim_geom, prim._position, prim.m_targetSpace);

+            prim.m_targetSpace = targetSpace;

+            d.GeomEnable(prim_geom);

+        }

+

+        public void enableBodySoft()

+        {

+            if (!childPrim && !m_isSelected)

+            {

+                if (m_isphysical && Body != IntPtr.Zero)

+                {

+                    if (m_isphantom && !m_isVolumeDetect)

+                    {

+                        m_collisionCategories = 0;

+                        m_collisionFlags = CollisionCategories.Land;

+                    }

+                    else

+                    {

+                        m_collisionCategories |= CollisionCategories.Body;

+                        m_collisionFlags |= (CollisionCategories.Land | CollisionCategories.Wind);

+                    }

+

+                    foreach (OdePrim prm in childrenPrim)

+                    {

+                        prm.m_collisionCategories = m_collisionCategories;

+                        prm.m_collisionFlags = m_collisionFlags;

+

+                        if (prm.prim_geom != IntPtr.Zero)

+                        {

+                            if (prm.m_NoColide)

+                            {

+                                d.GeomSetCategoryBits(prm.prim_geom, 0);

+                                d.GeomSetCollideBits(prm.prim_geom, (int)CollisionCategories.Land);

+                            }

+                            else

+                            {

+                                d.GeomSetCategoryBits(prm.prim_geom, (int)m_collisionCategories);

+                                d.GeomSetCollideBits(prm.prim_geom, (int)m_collisionFlags);

+                            }

+                            d.GeomEnable(prm.prim_geom);

+                        }

+                    }

+

+                    if (prim_geom != IntPtr.Zero)

+                    {

+                        if (m_NoColide)

+                        {

+                            d.GeomSetCategoryBits(prim_geom, 0);

+                            d.GeomSetCollideBits(prim_geom, (int)CollisionCategories.Land);

+                        }

+                        else

+                        {

+                            d.GeomSetCategoryBits(prim_geom, (int)m_collisionCategories);

+                            d.GeomSetCollideBits(prim_geom, (int)m_collisionFlags);

+                        }

+                        d.GeomEnable(prim_geom);

+                    }

+                    d.BodyEnable(Body);

+                }

+            }

+            m_disabled = false;

+            resetCollisionAccounting(); // this sets m_disable to false

+        }

+

+        private void disableBodySoft()

+        {

+            m_disabled = true;

+            if (!childPrim)

+            {

+                if (m_isphysical && Body != IntPtr.Zero)

+                {

+                    m_collisionCategories &= ~CollisionCategories.Body;

+                    m_collisionFlags &= ~(CollisionCategories.Wind | CollisionCategories.Land);

+

+                    foreach (OdePrim prm in childrenPrim)

+                    {

+                        prm.m_collisionCategories = m_collisionCategories;

+                        prm.m_collisionFlags = m_collisionFlags;

+

+                        if (prm.prim_geom != IntPtr.Zero)

+                        {

+                            if (prm.m_NoColide)

+                            {

+                                d.GeomSetCategoryBits(prm.prim_geom, 0);

+                                d.GeomSetCollideBits(prm.prim_geom, 0);

+                            }

+                            else

+                            {

+                                d.GeomSetCategoryBits(prm.prim_geom, (int)m_collisionCategories);

+                                d.GeomSetCollideBits(prm.prim_geom, (int)m_collisionFlags);

+                            }

+                            d.GeomDisable(prm.prim_geom);

+                        }

+                    }

+

+                    if (prim_geom != IntPtr.Zero)

+                    {

+                        if (m_NoColide)

+                        {

+                            d.GeomSetCategoryBits(prim_geom, 0);

+                            d.GeomSetCollideBits(prim_geom, 0);

+                        }

+                        else

+                        {

+                            d.GeomSetCategoryBits(prim_geom, (int)m_collisionCategories);

+                            d.GeomSetCollideBits(prim_geom, (int)m_collisionFlags);

+                        }

+                        d.GeomDisable(prim_geom);

+                    }

+

+                    d.BodyDisable(Body);

+                }

+            }

+        }

+

+        private void MakeBody()

+        {

+            if (!m_isphysical) // only physical get bodies

+                return;

+

+            if (childPrim)  // child prims don't get bodies;

+                return;

+

+            if (m_building)

+                return;

+

+            if (prim_geom == IntPtr.Zero)

+            {

+                m_log.Warn("[PHYSICS]: Unable to link the linkset.  Root has no geom yet");

+                return;

+            }

+

+            if (Body != IntPtr.Zero)

+            {

+                d.BodyDestroy(Body);

+                Body = IntPtr.Zero;

+                m_log.Warn("[PHYSICS]: MakeBody called having a body");

+            }

+

+

+            if (d.GeomGetBody(prim_geom) != IntPtr.Zero)

+            {

+                d.GeomSetBody(prim_geom, IntPtr.Zero);

+                m_log.Warn("[PHYSICS]: MakeBody root geom already had a body");

+            }

+

+            d.Matrix3 mymat = new d.Matrix3();

+            d.Quaternion myrot = new d.Quaternion();

+            d.Mass objdmass = new d.Mass { };

+

+            Body = d.BodyCreate(_parent_scene.world);

+

+            DMassDup(ref primdMass, out objdmass);

+

+            // rotate inertia

+            myrot.X = _orientation.X;

+            myrot.Y = _orientation.Y;

+            myrot.Z = _orientation.Z;

+            myrot.W = _orientation.W;

+

+            d.RfromQ(out mymat, ref myrot);

+            d.MassRotate(ref objdmass, ref mymat);

+

+            // set the body rotation and position

+            d.BodySetRotation(Body, ref mymat);

+

+            // recompute full object inertia if needed

+            if (childrenPrim.Count > 0)

+            {

+                d.Matrix3 mat = new d.Matrix3();

+                d.Quaternion quat = new d.Quaternion();

+                d.Mass tmpdmass = new d.Mass { };

+                Vector3 rcm;

+

+                rcm.X = _position.X + objdmass.c.X;

+                rcm.Y = _position.Y + objdmass.c.Y;

+                rcm.Z = _position.Z + objdmass.c.Z;

+

+                lock (childrenPrim)

+                {

+                    foreach (OdePrim prm in childrenPrim)

+                    {

+                        if (prm.prim_geom == IntPtr.Zero)

+                        {

+                            m_log.Warn("[PHYSICS]: Unable to link one of the linkset elements, skipping it.  No geom yet");

+                            continue;

+                        }

+

+                        DMassCopy(ref prm.primdMass, ref tmpdmass);

+

+                        // apply prim current rotation to inertia

+                        quat.X = prm._orientation.X;

+                        quat.Y = prm._orientation.Y;

+                        quat.Z = prm._orientation.Z;

+                        quat.W = prm._orientation.W;

+                        d.RfromQ(out mat, ref quat);

+                        d.MassRotate(ref tmpdmass, ref mat);

+

+                        Vector3 ppos = prm._position;

+                        ppos.X += tmpdmass.c.X - rcm.X;

+                        ppos.Y += tmpdmass.c.Y - rcm.Y;

+                        ppos.Z += tmpdmass.c.Z - rcm.Z;

+

+                        // refer inertia to root prim center of mass position

+                        d.MassTranslate(ref tmpdmass,

+                            ppos.X,

+                            ppos.Y,

+                            ppos.Z);

+

+                        d.MassAdd(ref objdmass, ref tmpdmass); // add to total object inertia

+                        // fix prim colision cats

+

+                        if (d.GeomGetBody(prm.prim_geom) != IntPtr.Zero)

+                        {

+                            d.GeomSetBody(prm.prim_geom, IntPtr.Zero);

+                            m_log.Warn("[PHYSICS]: MakeBody child geom already had a body");

+                        }

+

+                        d.GeomClearOffset(prm.prim_geom);

+                        d.GeomSetBody(prm.prim_geom, Body);

+                        prm.Body = Body;

+                        d.GeomSetOffsetWorldRotation(prm.prim_geom, ref mat); // set relative rotation

+                    }

+                }

+            }

+

+            d.GeomClearOffset(prim_geom); // make sure we don't have a hidden offset

+            // associate root geom with body

+            d.GeomSetBody(prim_geom, Body);

+

+            d.BodySetPosition(Body, _position.X + objdmass.c.X, _position.Y + objdmass.c.Y, _position.Z + objdmass.c.Z);

+            d.GeomSetOffsetWorldPosition(prim_geom, _position.X, _position.Y, _position.Z);

+

+            d.MassTranslate(ref objdmass, -objdmass.c.X, -objdmass.c.Y, -objdmass.c.Z); // ode wants inertia at center of body

+            myrot.W = -myrot.W;

+            d.RfromQ(out mymat, ref myrot);

+            d.MassRotate(ref objdmass, ref mymat);

+            d.BodySetMass(Body, ref objdmass);

+            _mass = objdmass.mass;

+

+            // disconnect from world gravity so we can apply buoyancy

+            d.BodySetGravityMode(Body, false);

+

+            d.BodySetAutoDisableFlag(Body, true);

+            d.BodySetAutoDisableSteps(Body, body_autodisable_frames);

+            //            d.BodySetLinearDampingThreshold(Body, 0.01f);

+            //            d.BodySetAngularDampingThreshold(Body, 0.001f);

+            d.BodySetDamping(Body, .002f, .002f);

+

+

+                if (m_targetSpace != IntPtr.Zero)

+                {

+                    _parent_scene.waitForSpaceUnlock(m_targetSpace);

+                    if (d.SpaceQuery(m_targetSpace, prim_geom))

+                        d.SpaceRemove(m_targetSpace, prim_geom);

+                }

+

+

+            if (childrenPrim.Count == 0)

+            {

+                collide_geom = prim_geom;

+                m_targetSpace = _parent_scene.ActiveSpace;

+                d.SpaceAdd(m_targetSpace, prim_geom);

+            }

+            else

+            {

+                m_targetSpace = d.HashSpaceCreate(_parent_scene.ActiveSpace);

+                d.HashSpaceSetLevels(m_targetSpace, -2, 8);

+                d.SpaceSetSublevel(m_targetSpace, 3);

+                d.SpaceSetCleanup(m_targetSpace, false);

+                d.SpaceAdd(m_targetSpace, prim_geom);

+                collide_geom = m_targetSpace;

+            }

+

+            if (m_delaySelect)

+            {

+                m_isSelected = true;

+                m_delaySelect = false;

+            }

+

+            lock (childrenPrim)

+            {

+                foreach (OdePrim prm in childrenPrim)

+                {

+                    if (prm.prim_geom == IntPtr.Zero)

+                        continue;

+

+                    Vector3 ppos = prm._position;

+                    d.GeomSetOffsetWorldPosition(prm.prim_geom, ppos.X, ppos.Y, ppos.Z); // set relative position

+

+                    if (prm.m_targetSpace != m_targetSpace)

+                    {

+                        if (prm.m_targetSpace != IntPtr.Zero)

+                        {

+                            _parent_scene.waitForSpaceUnlock(prm.m_targetSpace);

+                            if (d.SpaceQuery(prm.m_targetSpace, prm.prim_geom))

+                                d.SpaceRemove(prm.m_targetSpace, prm.prim_geom);

+                        }

+                        prm.m_targetSpace = m_targetSpace;

+                        d.SpaceAdd(m_targetSpace, prm.prim_geom);

+                    }

+

+                    if (m_isSelected || m_disabled)

+                    {

+                        prm.m_collisionCategories &= ~CollisionCategories.Body;

+                        prm.m_collisionFlags &= ~(CollisionCategories.Land | CollisionCategories.Wind);

+                        d.GeomDisable(prm.prim_geom);

+                    }

+                    else

+                    {

+                        if (m_isphantom && !m_isVolumeDetect)

+                        {

+                            prm.m_collisionCategories = 0;

+                            prm.m_collisionFlags = CollisionCategories.Land;

+                        }

+                        else

+                        {

+                            prm.m_collisionCategories |= CollisionCategories.Body;

+                            prm.m_collisionFlags |= (CollisionCategories.Land | CollisionCategories.Wind);

+                        }

+                        d.GeomEnable(prm.prim_geom);

+                    }

+

+                    if (prm.m_NoColide)

+                    {

+                        d.GeomSetCategoryBits(prm.prim_geom, 0);

+                        d.GeomSetCollideBits(prm.prim_geom, (int)CollisionCategories.Land);

+                        d.GeomEnable(prm.prim_geom);

+                    }

+                    else

+                    {

+                        d.GeomSetCategoryBits(prm.prim_geom, (int)prm.m_collisionCategories);

+                        d.GeomSetCollideBits(prm.prim_geom, (int)prm.m_collisionFlags);

+                    }

+                    prm.m_collisionscore = 0;

+

+                    if(!m_disabled)

+                        prm.m_disabled = false;

+

+                    _parent_scene.addActivePrim(prm);

+                }

+            }

+

+            // The body doesn't already have a finite rotation mode set here

+            if ((!m_angularlock.ApproxEquals(Vector3.One, 0.0f)) && _parent == null)

+            {

+                createAMotor(m_angularlock);

+            }

+

+            if (m_isSelected || m_disabled)

+            {

+                m_collisionCategories &= ~CollisionCategories.Body;

+                m_collisionFlags &= ~(CollisionCategories.Land | CollisionCategories.Wind);

+

+                d.GeomDisable(prim_geom);

+                d.BodyDisable(Body);

+            }

+            else

+            {

+                if (m_isphantom && !m_isVolumeDetect)

+                {

+                    m_collisionCategories = 0;

+                    m_collisionFlags = CollisionCategories.Land;

+                }

+                else

+                {

+                    m_collisionCategories |= CollisionCategories.Body;

+                    m_collisionFlags |= (CollisionCategories.Land | CollisionCategories.Wind);

+                }

+

+                d.BodySetAngularVel(Body, m_rotationalVelocity.X, m_rotationalVelocity.Y, m_rotationalVelocity.Z);

+                d.BodySetLinearVel(Body, _velocity.X, _velocity.Y, _velocity.Z);

+            }

+

+            if (m_NoColide)

+            {

+                d.GeomSetCategoryBits(prim_geom, 0);

+                d.GeomSetCollideBits(prim_geom, (int)CollisionCategories.Land);

+            }

+            else

+            {

+                d.GeomSetCategoryBits(prim_geom, (int)m_collisionCategories);

+                d.GeomSetCollideBits(prim_geom, (int)m_collisionFlags);

+            }

+

+            m_collisionscore = 0;

+

+            m_softcolide = true;

+            _parent_scene.addActivePrim(this);

+            _parent_scene.addActiveGroups(this);

+        }

+

+        private void DestroyBody()

+        {

+            if (Body != IntPtr.Zero)

+            {

+                _parent_scene.remActivePrim(this);

+                m_collisionCategories &= ~CollisionCategories.Body;

+                m_collisionFlags &= ~(CollisionCategories.Wind | CollisionCategories.Land);

+                if (prim_geom != IntPtr.Zero)

+                {

+                    if (m_NoColide)

+                    {

+                        d.GeomSetCategoryBits(prim_geom, 0);

+                        d.GeomSetCollideBits(prim_geom, 0);

+                    }

+                    else

+                    {

+                        d.GeomSetCategoryBits(prim_geom, (int)m_collisionCategories);

+                        d.GeomSetCollideBits(prim_geom, (int)m_collisionFlags);

+                    }

+                    UpdateDataFromGeom();

+                    d.GeomSetBody(prim_geom, IntPtr.Zero);

+                    SetInStaticSpace(this);

+                }

+

+                if (!childPrim)

+                {

+                    lock (childrenPrim)

+                    {

+                        foreach (OdePrim prm in childrenPrim)

+                        {

+                            _parent_scene.remActivePrim(prm);

+                            prm.m_collisionCategories = m_collisionCategories;

+                            prm.m_collisionFlags = m_collisionFlags;

+                            if (prm.prim_geom != IntPtr.Zero)

+                            {

+                                if (prm.m_NoColide)

+                                {

+                                    d.GeomSetCategoryBits(prm.prim_geom, 0);

+                                    d.GeomSetCollideBits(prm.prim_geom, 0);

+                                }

+                                else

+                                {

+                                    d.GeomSetCategoryBits(prm.prim_geom, (int)m_collisionCategories);

+                                    d.GeomSetCollideBits(prm.prim_geom, (int)m_collisionFlags);

+                                }

+                                prm.UpdateDataFromGeom();

+                                SetInStaticSpace(prm);

+                            }

+                            prm.Body = IntPtr.Zero;

+                            prm._mass = prm.primMass;

+                            prm.m_collisionscore = 0;

+                        }

+                    }

+                    if (Amotor != IntPtr.Zero)

+                    {

+                        d.JointDestroy(Amotor);

+                        Amotor = IntPtr.Zero;

+                    }

+                    _parent_scene.remActiveGroup(this);

+                    d.BodyDestroy(Body);

+                }

+                Body = IntPtr.Zero;

+            }

+            _mass = primMass;

+            m_collisionscore = 0;

+        }

+

+        #region Mass Calculation

+

+        private float CalculatePrimVolume()

+        {

+            float volume = _size.X * _size.Y * _size.Z; // default

+            float tmp;

+

+            float hollowAmount = (float)_pbs.ProfileHollow * 2.0e-5f;

+            float hollowVolume = hollowAmount * hollowAmount;

+

+            switch (_pbs.ProfileShape)

+            {

+                case ProfileShape.Square:

+                    // default box

+

+                    if (_pbs.PathCurve == (byte)Extrusion.Straight)

+                    {

+                        if (hollowAmount > 0.0)

+                        {

+                            switch (_pbs.HollowShape)

+                            {

+                                case HollowShape.Square:

+                                case HollowShape.Same:

+                                    break;

+

+                                case HollowShape.Circle:

+

+                                    hollowVolume *= 0.78539816339f;

+                                    break;

+

+                                case HollowShape.Triangle:

+

+                                    hollowVolume *= (0.5f * .5f);

+                                    break;

+

+                                default:

+                                    hollowVolume = 0;

+                                    break;

+                            }

+                            volume *= (1.0f - hollowVolume);

+                        }

+                    }

+

+                    else if (_pbs.PathCurve == (byte)Extrusion.Curve1)

+                    {

+                        //a tube 

+

+                        volume *= 0.78539816339e-2f * (float)(200 - _pbs.PathScaleX);

+                        tmp = 1.0f - 2.0e-2f * (float)(200 - _pbs.PathScaleY);

+                        volume -= volume * tmp * tmp;

+

+                        if (hollowAmount > 0.0)

+                        {

+                            hollowVolume *= hollowAmount;

+

+                            switch (_pbs.HollowShape)

+                            {

+                                case HollowShape.Square:

+                                case HollowShape.Same:

+                                    break;

+

+                                case HollowShape.Circle:

+                                    hollowVolume *= 0.78539816339f;

+                                    break;

+

+                                case HollowShape.Triangle:

+                                    hollowVolume *= 0.5f * 0.5f;

+                                    break;

+                                default:

+                                    hollowVolume = 0;

+                                    break;

+                            }

+                            volume *= (1.0f - hollowVolume);

+                        }

+                    }

+

+                    break;

+

+                case ProfileShape.Circle:

+

+                    if (_pbs.PathCurve == (byte)Extrusion.Straight)

+                    {

+                        volume *= 0.78539816339f; // elipse base

+

+                        if (hollowAmount > 0.0)

+                        {

+                            switch (_pbs.HollowShape)

+                            {

+                                case HollowShape.Same:

+                                case HollowShape.Circle:

+                                    break;

+

+                                case HollowShape.Square:

+                                    hollowVolume *= 0.5f * 2.5984480504799f;

+                                    break;

+

+                                case HollowShape.Triangle:

+                                    hollowVolume *= .5f * 1.27323954473516f;

+                                    break;

+

+                                default:

+                                    hollowVolume = 0;

+                                    break;

+                            }

+                            volume *= (1.0f - hollowVolume);

+                        }

+                    }

+

+                    else if (_pbs.PathCurve == (byte)Extrusion.Curve1)

+                    {

+                        volume *= 0.61685027506808491367715568749226e-2f * (float)(200 - _pbs.PathScaleX);

+                        tmp = 1.0f - .02f * (float)(200 - _pbs.PathScaleY);

+                        volume *= (1.0f - tmp * tmp);

+

+                        if (hollowAmount > 0.0)

+                        {

+

+                            // calculate the hollow volume by it's shape compared to the prim shape

+                            hollowVolume *= hollowAmount;

+

+                            switch (_pbs.HollowShape)

+                            {

+                                case HollowShape.Same:

+                                case HollowShape.Circle:

+                                    break;

+

+                                case HollowShape.Square:

+                                    hollowVolume *= 0.5f * 2.5984480504799f;

+                                    break;

+

+                                case HollowShape.Triangle:

+                                    hollowVolume *= .5f * 1.27323954473516f;

+                                    break;

+

+                                default:

+                                    hollowVolume = 0;

+                                    break;

+                            }

+                            volume *= (1.0f - hollowVolume);

+                        }

+                    }

+                    break;

+

+                case ProfileShape.HalfCircle:

+                    if (_pbs.PathCurve == (byte)Extrusion.Curve1)

+                    {

+                        volume *= 0.52359877559829887307710723054658f;

+                    }

+                    break;

+

+                case ProfileShape.EquilateralTriangle:

+

+                    if (_pbs.PathCurve == (byte)Extrusion.Straight)

+                    {

+                        volume *= 0.32475953f;

+

+                        if (hollowAmount > 0.0)

+                        {

+

+                            // calculate the hollow volume by it's shape compared to the prim shape

+                            switch (_pbs.HollowShape)

+                            {

+                                case HollowShape.Same:

+                                case HollowShape.Triangle:

+                                    hollowVolume *= .25f;

+                                    break;

+

+                                case HollowShape.Square:

+                                    hollowVolume *= 0.499849f * 3.07920140172638f;

+                                    break;

+

+                                case HollowShape.Circle:

+                                    // Hollow shape is a perfect cyllinder in respect to the cube's scale

+                                    // Cyllinder hollow volume calculation

+

+                                    hollowVolume *= 0.1963495f * 3.07920140172638f;

+                                    break;

+

+                                default:

+                                    hollowVolume = 0;

+                                    break;

+                            }

+                            volume *= (1.0f - hollowVolume);

+                        }

+                    }

+                    else if (_pbs.PathCurve == (byte)Extrusion.Curve1)

+                    {

+                        volume *= 0.32475953f;

+                        volume *= 0.01f * (float)(200 - _pbs.PathScaleX);

+                        tmp = 1.0f - .02f * (float)(200 - _pbs.PathScaleY);

+                        volume *= (1.0f - tmp * tmp);

+

+                        if (hollowAmount > 0.0)

+                        {

+

+                            hollowVolume *= hollowAmount;

+

+                            switch (_pbs.HollowShape)

+                            {

+                                case HollowShape.Same:

+                                case HollowShape.Triangle:

+                                    hollowVolume *= .25f;

+                                    break;

+

+                                case HollowShape.Square:

+                                    hollowVolume *= 0.499849f * 3.07920140172638f;

+                                    break;

+

+                                case HollowShape.Circle:

+

+                                    hollowVolume *= 0.1963495f * 3.07920140172638f;

+                                    break;

+

+                                default:

+                                    hollowVolume = 0;

+                                    break;

+                            }

+                            volume *= (1.0f - hollowVolume);

+                        }

+                    }

+                    break;

+

+                default:

+                    break;

+            }

+

+            float taperX1;

+            float taperY1;

+            float taperX;

+            float taperY;

+            float pathBegin;

+            float pathEnd;

+            float profileBegin;

+            float profileEnd;

+

+            if (_pbs.PathCurve == (byte)Extrusion.Straight || _pbs.PathCurve == (byte)Extrusion.Flexible)

+            {

+                taperX1 = _pbs.PathScaleX * 0.01f;

+                if (taperX1 > 1.0f)

+                    taperX1 = 2.0f - taperX1;

+                taperX = 1.0f - taperX1;

+

+                taperY1 = _pbs.PathScaleY * 0.01f;

+                if (taperY1 > 1.0f)

+                    taperY1 = 2.0f - taperY1;

+                taperY = 1.0f - taperY1;

+            }

+            else

+            {

+                taperX = _pbs.PathTaperX * 0.01f;

+                if (taperX < 0.0f)

+                    taperX = -taperX;

+                taperX1 = 1.0f - taperX;

+

+                taperY = _pbs.PathTaperY * 0.01f;

+                if (taperY < 0.0f)

+                    taperY = -taperY;

+                taperY1 = 1.0f - taperY;

+            }

+

+            volume *= (taperX1 * taperY1 + 0.5f * (taperX1 * taperY + taperX * taperY1) + 0.3333333333f * taperX * taperY);

+

+            pathBegin = (float)_pbs.PathBegin * 2.0e-5f;

+            pathEnd = 1.0f - (float)_pbs.PathEnd * 2.0e-5f;

+            volume *= (pathEnd - pathBegin);

+

+            // this is crude aproximation

+            profileBegin = (float)_pbs.ProfileBegin * 2.0e-5f;

+            profileEnd = 1.0f - (float)_pbs.ProfileEnd * 2.0e-5f;

+            volume *= (profileEnd - profileBegin);

+

+            return volume;

+        }

+

+

+        private void CalcPrimBodyData()

+        {

+            float volume;

+

+            if (prim_geom == IntPtr.Zero)

+            {

+                // Ubit let's have a initial basic OOB

+                primOOBsize.X = _size.X;

+                primOOBsize.Y = _size.Y;

+                primOOBsize.Z = _size.Z;

+                primOOBoffset = Vector3.Zero;

+            }

+            else

+            {

+                d.AABB AABB;

+                d.GeomGetAABB(prim_geom, out AABB); // get the AABB from engine geom

+

+                primOOBsize.X = (AABB.MaxX - AABB.MinX);

+                primOOBsize.Y = (AABB.MaxY - AABB.MinY);

+                primOOBsize.Z = (AABB.MaxZ - AABB.MinZ);

+                if (!hasOOBoffsetFromMesh)

+                {

+                    primOOBoffset.X = (AABB.MaxX + AABB.MinX) * 0.5f;

+                    primOOBoffset.Y = (AABB.MaxY + AABB.MinY) * 0.5f;

+                    primOOBoffset.Z = (AABB.MaxZ + AABB.MinZ) * 0.5f;

+                }

+            }

+

+            // also its own inertia and mass

+            // keep using basic shape mass for now

+            volume = CalculatePrimVolume();

+

+            primMass = m_density * volume;

+

+            if (primMass <= 0)

+                primMass = 0.0001f;//ckrinke: Mass must be greater then zero.

+            if (primMass > _parent_scene.maximumMassObject)

+                primMass = _parent_scene.maximumMassObject;

+

+            _mass = primMass; // just in case

+

+            d.MassSetBoxTotal(out primdMass, primMass, primOOBsize.X, primOOBsize.Y, primOOBsize.Z);

+

+            d.MassTranslate(ref primdMass,

+                                primOOBoffset.X,

+                                primOOBoffset.Y,

+                                primOOBoffset.Z);

+

+            primOOBsize *= 0.5f; // let obb size be a corner coords

+            primOOBradiusSQ = primOOBsize.LengthSquared();

+        }

+

+

+        #endregion

+

+

+        /// <summary>

+        /// Add a child prim to this parent prim.

+        /// </summary>

+        /// <param name="prim">Child prim</param>

+        // I'm the parent

+        // prim is the child

+        public void ParentPrim(OdePrim prim)

+        {

+            //Console.WriteLine("ParentPrim  " + m_primName);

+            if (this.m_localID != prim.m_localID)

+            {

+                DestroyBody();  // for now we need to rebuil entire object on link change

+

+                lock (childrenPrim)

+                {

+                    // adopt the prim

+                    if (!childrenPrim.Contains(prim))

+                        childrenPrim.Add(prim);

+

+                    // see if this prim has kids and adopt them also

+                    // should not happen for now

+                    foreach (OdePrim prm in prim.childrenPrim)

+                    {

+                        if (!childrenPrim.Contains(prm))

+                        {

+                            if (prm.Body != IntPtr.Zero)

+                            {

+                                if (prm.prim_geom != IntPtr.Zero)

+                                    d.GeomSetBody(prm.prim_geom, IntPtr.Zero);

+                                if (prm.Body != prim.Body)

+                                    prm.DestroyBody(); // don't loose bodies around

+                                prm.Body = IntPtr.Zero;

+                            }

+

+                            childrenPrim.Add(prm);

+                            prm._parent = this;

+                        }

+                    }

+                }

+                //Remove old children from the prim

+                prim.childrenPrim.Clear();

+

+                if (prim.Body != IntPtr.Zero)

+                {

+                    if (prim.prim_geom != IntPtr.Zero)

+                        d.GeomSetBody(prim.prim_geom, IntPtr.Zero);

+                    prim.DestroyBody(); // don't loose bodies around

+                    prim.Body = IntPtr.Zero;

+                }

+

+                prim.childPrim = true;

+                prim._parent = this;

+

+                MakeBody(); // full nasty reconstruction

+            }

+        }

+

+        private void UpdateChildsfromgeom()

+        {

+            if (childrenPrim.Count > 0)

+            {

+                foreach (OdePrim prm in childrenPrim)

+                    prm.UpdateDataFromGeom();

+            }

+        }

+

+        private void UpdateDataFromGeom()

+        {

+            if (prim_geom != IntPtr.Zero)

+            {

+                d.Vector3 lpos;

+                d.GeomCopyPosition(prim_geom, out lpos);

+                _position.X = lpos.X;

+                _position.Y = lpos.Y;

+                _position.Z = lpos.Z;

+                d.Quaternion qtmp = new d.Quaternion { };

+                d.GeomCopyQuaternion(prim_geom, out qtmp);

+                _orientation.W = qtmp.W;

+                _orientation.X = qtmp.X;

+                _orientation.Y = qtmp.Y;

+                _orientation.Z = qtmp.Z;

+            }

+        }

+

+        private void ChildDelink(OdePrim odePrim, bool remakebodies)

+        {

+            // Okay, we have a delinked child.. destroy all body and remake

+            if (odePrim != this && !childrenPrim.Contains(odePrim))

+                return;

+

+            DestroyBody();

+

+            if (odePrim == this) // delinking the root prim

+            {

+                OdePrim newroot = null;

+                lock (childrenPrim)

+                {

+                    if (childrenPrim.Count > 0)

+                    {

+                        newroot = childrenPrim[0];

+                        childrenPrim.RemoveAt(0);

+                        foreach (OdePrim prm in childrenPrim)

+                        {

+                            newroot.childrenPrim.Add(prm);

+                        }

+                        childrenPrim.Clear();

+                    }

+                    if (newroot != null)

+                    {

+                        newroot.childPrim = false;

+                        newroot._parent = null;

+                        if (remakebodies)

+                            newroot.MakeBody();

+                    }

+                }

+            }

+

+            else

+            {

+                lock (childrenPrim)

+                {

+                    childrenPrim.Remove(odePrim);

+                    odePrim.childPrim = false;

+                    odePrim._parent = null;

+                    //                    odePrim.UpdateDataFromGeom();

+                    if (remakebodies)

+                        odePrim.MakeBody();

+                }

+            }

+            if (remakebodies)

+                MakeBody();

+        }

+

+        protected void ChildRemove(OdePrim odePrim, bool reMakeBody)

+        {

+            // Okay, we have a delinked child.. destroy all body and remake

+            if (odePrim != this && !childrenPrim.Contains(odePrim))

+                return;

+

+            DestroyBody();

+

+            if (odePrim == this)

+            {

+                OdePrim newroot = null;

+                lock (childrenPrim)

+                {

+                    if (childrenPrim.Count > 0)

+                    {

+                        newroot = childrenPrim[0];

+                        childrenPrim.RemoveAt(0);

+                        foreach (OdePrim prm in childrenPrim)

+                        {

+                            newroot.childrenPrim.Add(prm);

+                        }

+                        childrenPrim.Clear();

+                    }

+                    if (newroot != null)

+                    {

+                        newroot.childPrim = false;

+                        newroot._parent = null;

+                        newroot.MakeBody();

+                    }

+                }

+                if (reMakeBody)

+                    MakeBody();

+                return;

+            }

+            else

+            {

+                lock (childrenPrim)

+                {

+                    childrenPrim.Remove(odePrim);

+                    odePrim.childPrim = false;

+                    odePrim._parent = null;

+                    if (reMakeBody)

+                        odePrim.MakeBody();

+                }

+            }

+            MakeBody();

+        }

+

+        #region changes

+

+        private void changeadd()

+        {

+            CreateGeom();

+

+            if (prim_geom != IntPtr.Zero)

+            {

+                d.GeomSetPosition(prim_geom, _position.X, _position.Y, _position.Z);

+                d.Quaternion myrot = new d.Quaternion();

+                myrot.X = _orientation.X;

+                myrot.Y = _orientation.Y;

+                myrot.Z = _orientation.Z;

+                myrot.W = _orientation.W;

+                d.GeomSetQuaternion(prim_geom, ref myrot);

+

+                if (!m_isphysical)

+                    SetInStaticSpace(this);

+            }

+

+            if (m_isphysical && Body == IntPtr.Zero)

+            {

+                MakeBody();

+            }

+        }

+

+        private void changeAngularLock(Vector3 newLock)

+        {

+            // do we have a Physical object?

+            if (Body != IntPtr.Zero)

+            {

+                //Check that we have a Parent

+                //If we have a parent then we're not authorative here

+                if (_parent == null)

+                {

+                    if (!newLock.ApproxEquals(Vector3.One, 0f))

+                    {

+                        createAMotor(newLock);

+                    }

+                    else

+                    {

+                        if (Amotor != IntPtr.Zero)

+                        {

+                            d.JointDestroy(Amotor);

+                            Amotor = IntPtr.Zero;

+                        }

+                    }

+                }

+            }

+            // Store this for later in case we get turned into a separate body

+            m_angularlock = newLock;

+        }

+

+        private void changeLink(OdePrim NewParent)

+        {

+            if (_parent == null && NewParent != null)

+            {

+                NewParent.ParentPrim(this);

+            }

+            else if (_parent != null)

+            {

+                if (_parent is OdePrim)

+                {

+                    if (NewParent != _parent)

+                    {

+                        (_parent as OdePrim).ChildDelink(this, false); // for now...

+                        childPrim = false;

+

+                        if (NewParent != null)

+                        {

+                            NewParent.ParentPrim(this);

+                        }

+                    }

+                }

+            }

+            _parent = NewParent;

+        }

+

+

+        private void Stop()

+        {

+            if (!childPrim)

+            {

+                m_force = Vector3.Zero;

+                m_forceacc = Vector3.Zero;

+                m_angularForceacc = Vector3.Zero;

+                _torque = Vector3.Zero;

+                _velocity = Vector3.Zero;

+                _acceleration = Vector3.Zero;

+                m_rotationalVelocity = Vector3.Zero;

+                _target_velocity = Vector3.Zero;

+                if (m_vehicle != null && m_vehicle.Type != Vehicle.TYPE_NONE)

+                    m_vehicle.Stop();

+            }

+

+            if (Body != IntPtr.Zero)

+            {

+                d.BodySetForce(Body, 0f, 0f, 0f);

+                d.BodySetTorque(Body, 0f, 0f, 0f);

+                d.BodySetLinearVel(Body, 0f, 0f, 0f);

+                d.BodySetAngularVel(Body, 0f, 0f, 0f);

+            }

+        }

+

+

+        private void changePhantomStatus(bool newval)

+        {

+            m_isphantom = newval;

+

+            if (m_isSelected)

+            {

+                m_collisionCategories = CollisionCategories.Selected;

+                m_collisionFlags = (CollisionCategories.Sensor | CollisionCategories.Space);

+            }

+            else

+            {

+                if (m_isphantom && !m_isVolumeDetect)

+                {

+                    m_collisionCategories = 0;

+                    if (m_isphysical)

+                        m_collisionFlags = CollisionCategories.Land;

+                    else

+                        m_collisionFlags = 0; // should never happen

+                }

+

+                else

+                {

+                    m_collisionCategories = CollisionCategories.Geom;

+                    if (m_isphysical)

+                        m_collisionCategories |= CollisionCategories.Body;

+

+                    m_collisionFlags = m_default_collisionFlags | CollisionCategories.Land;

+

+                    if (m_collidesWater)

+                        m_collisionFlags |= CollisionCategories.Water;

+                }

+            }

+

+            if (!childPrim)

+            {

+                foreach (OdePrim prm in childrenPrim)

+                {

+                    prm.m_collisionCategories = m_collisionCategories;

+                    prm.m_collisionFlags = m_collisionFlags;

+

+                    if (!prm.m_disabled && prm.prim_geom != IntPtr.Zero)

+                    {

+                        if (prm.m_NoColide)

+                        {

+                            d.GeomSetCategoryBits(prm.prim_geom, 0);

+                            if (m_isphysical)

+                                d.GeomSetCollideBits(prm.prim_geom, (int)CollisionCategories.Land);

+                            else

+                                d.GeomSetCollideBits(prm.prim_geom, 0);

+                        }

+                        else

+                        {

+                            d.GeomSetCategoryBits(prm.prim_geom, (int)m_collisionCategories);

+                            d.GeomSetCollideBits(prm.prim_geom, (int)m_collisionFlags);

+                        }

+                        if(!m_isSelected)

+                            d.GeomEnable(prm.prim_geom);

+                    }

+                }

+            }

+

+            if (!m_disabled && prim_geom != IntPtr.Zero)

+            {

+                if (m_NoColide)

+                {

+                    d.GeomSetCategoryBits(prim_geom, 0);

+                    if (m_isphysical)

+                        d.GeomSetCollideBits(prim_geom, (int)CollisionCategories.Land);

+                    else

+                        d.GeomSetCollideBits(prim_geom, 0);

+                }

+                else

+                {

+                    d.GeomSetCategoryBits(prim_geom, (int)m_collisionCategories);

+                    d.GeomSetCollideBits(prim_geom, (int)m_collisionFlags);

+                }

+                if(!m_isSelected)

+                    d.GeomEnable(prim_geom);

+            }

+        }

+

+        private void changeSelectedStatus(bool newval)

+        {

+            if (m_lastdoneSelected == newval)

+                return;

+

+            m_lastdoneSelected = newval;

+            DoSelectedStatus(newval);

+        }

+

+        private void CheckDelaySelect()

+        {

+            if (m_delaySelect)

+            {

+                DoSelectedStatus(m_isSelected);

+            }

+        }

+

+        private void DoSelectedStatus(bool newval)

+        {

+            m_isSelected = newval;

+            Stop();

+

+            if (newval)

+            {

+                if (!childPrim && Body != IntPtr.Zero)

+                    d.BodyDisable(Body);

+

+                if (m_delaySelect || m_isphysical)

+                {

+                    m_collisionCategories = CollisionCategories.Selected;

+                    m_collisionFlags = (CollisionCategories.Sensor | CollisionCategories.Space);

+

+                    if (!childPrim)

+                    {

+                        foreach (OdePrim prm in childrenPrim)

+                        {

+                            prm.m_collisionCategories = m_collisionCategories;

+                            prm.m_collisionFlags = m_collisionFlags;

+

+                            if (prm.prim_geom != null)

+                            {

+

+                                if (prm.m_NoColide)

+                                {

+                                    d.GeomSetCategoryBits(prm.prim_geom, 0);

+                                    d.GeomSetCollideBits(prm.prim_geom, 0);

+                                }

+                                else

+                                {

+                                    d.GeomSetCategoryBits(prm.prim_geom, (int)m_collisionCategories);

+                                    d.GeomSetCollideBits(prm.prim_geom, (int)m_collisionFlags);

+                                }

+                                d.GeomDisable(prm.prim_geom);

+                            }

+                            prm.m_delaySelect = false;

+                        }

+                    }

+

+                    if (prim_geom != null)

+                    {

+                        if (m_NoColide)

+                        {

+                            d.GeomSetCategoryBits(prim_geom, 0);

+                            d.GeomSetCollideBits(prim_geom, 0);

+                        }

+                        else

+                        {

+                            d.GeomSetCategoryBits(prim_geom, (int)m_collisionCategories);

+                            d.GeomSetCollideBits(prim_geom, (int)m_collisionFlags);

+                        }

+                        d.GeomDisable(prim_geom);

+                    }

+

+                    m_delaySelect = false;

+                }

+                else if(!m_isphysical)

+                {

+                    m_delaySelect = true;

+                }

+            }

+            else

+            {

+                if (!childPrim && Body != IntPtr.Zero && !m_disabled)

+                    d.BodyEnable(Body);

+

+                if (m_isphantom && !m_isVolumeDetect)

+                {

+                    m_collisionCategories = 0;

+                    if(m_isphysical)

+                        m_collisionFlags = CollisionCategories.Land;

+                    else

+                        m_collisionFlags = 0;

+                }

+                else

+                {

+                    m_collisionCategories = CollisionCategories.Geom;

+                    if (m_isphysical)

+                        m_collisionCategories |= CollisionCategories.Body;

+

+                    m_collisionFlags = m_default_collisionFlags | CollisionCategories.Land;

+

+                    if (m_collidesWater)

+                        m_collisionFlags |= CollisionCategories.Water;

+                }

+

+                if (!childPrim)

+                {

+                    foreach (OdePrim prm in childrenPrim)

+                    {

+                        prm.m_collisionCategories = m_collisionCategories;

+                        prm.m_collisionFlags = m_collisionFlags;

+

+                        if (!prm.m_disabled && prm.prim_geom != IntPtr.Zero)

+                        {

+                            if (prm.m_NoColide)

+                            {

+                                d.GeomSetCategoryBits(prm.prim_geom, 0);

+                                if (m_isphysical)

+                                    d.GeomSetCollideBits(prm.prim_geom, (int)CollisionCategories.Land);

+                                else

+                                    d.GeomSetCollideBits(prm.prim_geom, 0);

+                            }

+                            else

+                            {

+                                d.GeomSetCategoryBits(prm.prim_geom, (int)m_collisionCategories);

+                                d.GeomSetCollideBits(prm.prim_geom, (int)m_collisionFlags);

+                            }

+                            d.GeomEnable(prm.prim_geom);

+                        }

+                        prm.m_delaySelect = false;

+                        prm.m_softcolide = true;

+                    }

+                }

+

+                if (!m_disabled && prim_geom != IntPtr.Zero)

+                {

+                    if (m_NoColide)

+                    {

+                        d.GeomSetCategoryBits(prim_geom, 0);

+                        if (m_isphysical)

+                            d.GeomSetCollideBits(prim_geom, (int)CollisionCategories.Land);

+                        else

+                            d.GeomSetCollideBits(prim_geom, 0);

+                    }

+                    else

+                    {

+                        d.GeomSetCategoryBits(prim_geom, (int)m_collisionCategories);

+                        d.GeomSetCollideBits(prim_geom, (int)m_collisionFlags);

+                    }

+                    d.GeomEnable(prim_geom);

+                }

+

+                m_delaySelect = false;

+                m_softcolide = true;

+            }

+

+            resetCollisionAccounting();

+        }

+

+        private void changePosition(Vector3 newPos)

+        {

+            CheckDelaySelect();

+            if (m_isphysical)

+            {

+                if (childPrim)  // inertia is messed, must rebuild

+                {

+                    if (m_building)

+                    {

+                        _position = newPos;

+                    }

+                }

+                else

+                {

+                    if (_position != newPos)

+                    {

+                        d.GeomSetPosition(prim_geom, newPos.X, newPos.Y, newPos.Z);

+                        _position = newPos;

+                    }

+                    if (Body != IntPtr.Zero && !d.BodyIsEnabled(Body))

+                        d.BodyEnable(Body);

+                }

+            }

+            else

+            {

+                if (prim_geom != IntPtr.Zero)

+                {

+                    if (newPos != _position)

+                    {

+                        d.GeomSetPosition(prim_geom, newPos.X, newPos.Y, newPos.Z);

+                        _position = newPos;

+

+                        m_targetSpace = _parent_scene.MoveGeomToStaticSpace(prim_geom, _position, m_targetSpace);

+                    }

+                }

+            }

+            givefakepos--;

+            if (givefakepos < 0)

+                givefakepos = 0;

+            //            changeSelectedStatus();

+            m_softcolide = true;

+            resetCollisionAccounting();

+        }

+

+        private void changeOrientation(Quaternion newOri)

+        {

+            CheckDelaySelect();

+            if (m_isphysical)

+            {

+                if (childPrim)  // inertia is messed, must rebuild

+                {

+                    if (m_building)

+                    {

+                        _orientation = newOri;

+                    }

+                }

+                else

+                {

+                    if (newOri != _orientation)

+                    {

+                        d.Quaternion myrot = new d.Quaternion();

+                        myrot.X = newOri.X;

+                        myrot.Y = newOri.Y;

+                        myrot.Z = newOri.Z;

+                        myrot.W = newOri.W;

+                        d.GeomSetQuaternion(prim_geom, ref myrot);

+                        _orientation = newOri;

+                        if (Body != IntPtr.Zero && !m_angularlock.ApproxEquals(Vector3.One, 0f))

+                            createAMotor(m_angularlock);

+                    }

+                    if (Body != IntPtr.Zero && !d.BodyIsEnabled(Body))

+                        d.BodyEnable(Body);

+                }

+            }

+            else

+            {

+                if (prim_geom != IntPtr.Zero)

+                {

+                    if (newOri != _orientation)

+                    {

+                        d.Quaternion myrot = new d.Quaternion();

+                        myrot.X = newOri.X;

+                        myrot.Y = newOri.Y;

+                        myrot.Z = newOri.Z;

+                        myrot.W = newOri.W;

+                        d.GeomSetQuaternion(prim_geom, ref myrot);

+                        _orientation = newOri;

+                    }

+                }

+            }

+            givefakeori--;

+            if (givefakeori < 0)

+                givefakeori = 0;

+            m_softcolide = true;

+            resetCollisionAccounting();

+        }

+

+        private void changePositionAndOrientation(Vector3 newPos, Quaternion newOri)

+        {

+            CheckDelaySelect();

+            if (m_isphysical)

+            {

+                if (childPrim && m_building)  // inertia is messed, must rebuild

+                {

+                    _position = newPos;

+                    _orientation = newOri;

+                }

+                else

+                {

+                    if (newOri != _orientation)

+                    {

+                        d.Quaternion myrot = new d.Quaternion();

+                        myrot.X = newOri.X;

+                        myrot.Y = newOri.Y;

+                        myrot.Z = newOri.Z;

+                        myrot.W = newOri.W;

+                        d.GeomSetQuaternion(prim_geom, ref myrot);

+                        _orientation = newOri;

+                        if (Body != IntPtr.Zero && !m_angularlock.ApproxEquals(Vector3.One, 0f))

+                            createAMotor(m_angularlock);

+                    }

+                    if (_position != newPos)

+                    {

+                        d.GeomSetPosition(prim_geom, newPos.X, newPos.Y, newPos.Z);

+                        _position = newPos;

+                    }

+                    if (Body != IntPtr.Zero && !d.BodyIsEnabled(Body))

+                        d.BodyEnable(Body);

+                }

+            }

+            else

+            {

+                // string primScenAvatarIn = _parent_scene.whichspaceamIin(_position);

+                // int[] arrayitem = _parent_scene.calculateSpaceArrayItemFromPos(_position);

+

+                if (prim_geom != IntPtr.Zero)

+                {

+                    if (newOri != _orientation)

+                    {

+                        d.Quaternion myrot = new d.Quaternion();

+                        myrot.X = newOri.X;

+                        myrot.Y = newOri.Y;

+                        myrot.Z = newOri.Z;

+                        myrot.W = newOri.W;

+                        d.GeomSetQuaternion(prim_geom, ref myrot);

+                        _orientation = newOri;

+                    }

+

+                    if (newPos != _position)

+                    {

+                        d.GeomSetPosition(prim_geom, newPos.X, newPos.Y, newPos.Z);

+                        _position = newPos;

+

+                        m_targetSpace = _parent_scene.MoveGeomToStaticSpace(prim_geom, _position, m_targetSpace);

+                    }

+                }

+            }

+            givefakepos--;

+            if (givefakepos < 0)

+                givefakepos = 0;

+            givefakeori--;

+            if (givefakeori < 0)

+                givefakeori = 0;

+

+            m_softcolide = true;

+            resetCollisionAccounting();

+        }

+

+

+        private void changeDisable(bool disable)

+        {

+            if (disable)

+            {

+                if (!m_disabled)

+                    disableBodySoft();

+            }

+            else

+            {

+                if (m_disabled)

+                    enableBodySoft();

+            }

+        }

+

+        private void changePhysicsStatus(bool NewStatus)

+        {

+            CheckDelaySelect();

+

+            m_isphysical = NewStatus;

+

+            if (!childPrim)

+            {

+                if (NewStatus)

+                {

+                    if (Body == IntPtr.Zero)

+                        MakeBody();

+                }

+                else

+                {

+                    if (Body != IntPtr.Zero)

+                    {

+                        DestroyBody();

+                    }

+                    Stop();

+                }

+            }

+

+            resetCollisionAccounting();

+        }

+

+        private void changeprimsizeshape()

+        {

+            CheckDelaySelect();

+

+            OdePrim parent = (OdePrim)_parent;

+

+            bool chp = childPrim;

+

+            if (chp)

+            {

+                if (parent != null)

+                {

+                    parent.DestroyBody();

+                }

+            }

+            else

+            {

+                DestroyBody();

+            }

+

+            RemoveGeom();

+

+            // we don't need to do space calculation because the client sends a position update also.

+            if (_size.X <= 0)

+                _size.X = 0.01f;

+            if (_size.Y <= 0)

+                _size.Y = 0.01f;

+            if (_size.Z <= 0)

+                _size.Z = 0.01f;

+            // Construction of new prim

+

+            CreateGeom();

+

+            if (prim_geom != IntPtr.Zero)

+            {

+                d.GeomSetPosition(prim_geom, _position.X, _position.Y, _position.Z);

+                d.Quaternion myrot = new d.Quaternion();

+                myrot.X = _orientation.X;

+                myrot.Y = _orientation.Y;

+                myrot.Z = _orientation.Z;

+                myrot.W = _orientation.W;

+                d.GeomSetQuaternion(prim_geom, ref myrot);

+            }

+

+            if (chp)

+            {

+                if (parent != null)

+                {

+                    parent.MakeBody();

+                }

+            }

+            else

+                MakeBody();

+

+            m_softcolide = true;

+            resetCollisionAccounting();

+        }

+

+        private void changeSize(Vector3 newSize)

+        {

+            _size = newSize;

+            changeprimsizeshape();

+        }

+

+        private void changeShape(PrimitiveBaseShape newShape)

+        {

+            if(newShape != null)

+                _pbs = newShape;

+            changeprimsizeshape();

+        }

+

+        private void changeFloatOnWater(bool newval)

+        {

+            m_collidesWater = newval;

+

+            if (prim_geom != IntPtr.Zero && !m_isphantom)

+            {

+                if (m_collidesWater)

+                {

+                    m_collisionFlags |= CollisionCategories.Water;

+                }

+                else

+                {

+                    m_collisionFlags &= ~CollisionCategories.Water;

+                }

+                d.GeomSetCollideBits(prim_geom, (int)m_collisionFlags);

+            }

+        }

+

+        private void changeSetTorque(Vector3 newtorque)

+        {

+            if (!m_isSelected)

+            {

+                if (m_isphysical && Body != IntPtr.Zero)

+                {

+                    if (m_disabled)

+                        enableBodySoft();

+                    else if (!d.BodyIsEnabled(Body))

+                        d.BodyEnable(Body);

+

+                }

+                _torque = newtorque;

+            }

+        }

+

+        private void changeForce(Vector3 force)

+        {

+            m_force = force;

+            if (Body != IntPtr.Zero && !d.BodyIsEnabled(Body))

+                d.BodyEnable(Body);

+        }

+

+        private void changeAddForce(Vector3 force)

+        {

+            m_forceacc += force;

+            if (!m_isSelected)

+            {

+                lock (this)

+                {

+                    //m_log.Info("[PHYSICS]: dequeing forcelist");

+                    if (m_isphysical && Body != IntPtr.Zero)

+                    {

+                        if (m_disabled)

+                            enableBodySoft();

+                        else if (!d.BodyIsEnabled(Body))

+                            d.BodyEnable(Body);

+                    }

+                }

+

+                m_collisionscore = 0;

+            }

+        }

+

+        private void changeAddAngularForce(Vector3 aforce)

+        {

+            m_angularForceacc += aforce;

+            if (!m_isSelected)

+            {

+                lock (this)

+                {

+                    if (m_isphysical && Body != IntPtr.Zero)

+                    {

+                        if (m_disabled)

+                            enableBodySoft();

+                        else if (!d.BodyIsEnabled(Body))

+                            d.BodyEnable(Body);

+                    }

+                }

+                m_collisionscore = 0;

+            }

+        }

+

+        private void changevelocity(Vector3 newVel)

+        {

+            if (!m_isSelected)

+            {

+                if (Body != IntPtr.Zero)

+                {

+                    if (m_disabled)

+                        enableBodySoft();

+                    else if (!d.BodyIsEnabled(Body))

+                        d.BodyEnable(Body);

+

+                    d.BodySetLinearVel(Body, newVel.X, newVel.Y, newVel.Z);

+                }

+                //resetCollisionAccounting();           

+            }

+            _velocity = newVel;

+        }

+

+        private void changeVolumedetetion(bool newVolDtc)

+        {

+            m_isVolumeDetect = newVolDtc;

+        }

+

+        protected void changeBuilding(bool newbuilding)

+        {

+            if ((bool)newbuilding)

+            {

+                m_building = true;

+                if (!childPrim)

+                    DestroyBody();

+            }

+            else

+            {

+                m_building = false;

+                CheckDelaySelect();

+                if (!childPrim)

+                    MakeBody();

+            }

+            if (!childPrim && childrenPrim.Count > 0)

+            {

+                foreach (OdePrim prm in childrenPrim)

+                    prm.changeBuilding(m_building); // call directly

+            }

+        }

+

+       public void changeSetVehicle(VehicleData vdata)

+        {

+            if (m_vehicle == null)

+                m_vehicle = new ODEDynamics(this);

+            m_vehicle.DoSetVehicle(vdata);

+        }

+        private void changeVehicleType(int value)

+        {

+            if (value == (int)Vehicle.TYPE_NONE)

+            {

+                if (m_vehicle != null)

+                    m_vehicle = null;

+            }

+            else

+            {

+                if (m_vehicle == null)

+                    m_vehicle = new ODEDynamics(this);

+

+                m_vehicle.ProcessTypeChange((Vehicle)value);

+            }

+        }

+

+        private void changeVehicleFloatParam(strVehicleFloatParam fp)

+        {

+            if (m_vehicle == null)

+                return;

+

+            m_vehicle.ProcessFloatVehicleParam((Vehicle)fp.param, fp.value);

+        }

+

+        private void changeVehicleVectorParam(strVehicleVectorParam vp)

+        {

+            if (m_vehicle == null)

+                return;

+            m_vehicle.ProcessVectorVehicleParam((Vehicle)vp.param, vp.value);

+        }

+

+        private void changeVehicleRotationParam(strVehicleQuatParam qp)

+        {

+            if (m_vehicle == null)

+                return;

+            m_vehicle.ProcessRotationVehicleParam((Vehicle)qp.param, qp.value);

+        }

+

+        private void changeVehicleFlags(strVehicleBoolParam bp)

+        {

+            if (m_vehicle == null)

+                return;

+            m_vehicle.ProcessVehicleFlags(bp.param, bp.value);

+        }

+

+        #endregion

+

+        public void Move()

+        {

+            if (!childPrim && m_isphysical && Body != IntPtr.Zero &&

+                !m_disabled && !m_isSelected && d.BodyIsEnabled(Body) && !m_building && !m_outbounds)

+            //                  !m_disabled && !m_isSelected && !m_building && !m_outbounds)

+            {

+//                if (!d.BodyIsEnabled(Body)) d.BodyEnable(Body); // KF add 161009

+

+                float timestep = _parent_scene.ODE_STEPSIZE;

+

+                // check outside region

+                d.Vector3 lpos;

+                d.GeomCopyPosition(prim_geom, out lpos); // root position that is seem by rest of simulator

+

+                if (lpos.Z < -100 || lpos.Z > 100000f)

+                {

+                    m_outbounds = true;

+

+                    lpos.Z = Util.Clip(lpos.Z, -100f, 100000f);

+                    _acceleration.X = 0;

+                    _acceleration.Y = 0;

+                    _acceleration.Z = 0;

+

+                    _velocity.X = 0;

+                    _velocity.Y = 0;

+                    _velocity.Z = 0;

+                    m_rotationalVelocity.X = 0;

+                    m_rotationalVelocity.Y = 0;

+                    m_rotationalVelocity.Z = 0;

+

+                    d.BodySetLinearVel(Body, 0, 0, 0); // stop it

+                    d.BodySetAngularVel(Body, 0, 0, 0); // stop it

+                    d.BodySetPosition(Body, lpos.X, lpos.Y, lpos.Z); // put it somewhere 

+                    m_lastposition = _position;

+                    m_lastorientation = _orientation;

+

+                    base.RequestPhysicsterseUpdate();

+

+                    m_throttleUpdates = false;

+                    throttleCounter = 0;

+                    _zeroFlag = true;

+

+                    disableBodySoft(); // disable it and colisions

+                    base.RaiseOutOfBounds(_position);

+                    return;

+                }

+

+                if (lpos.X < 0f)

+                {

+                    _position.X = Util.Clip(lpos.X, -2f, -0.1f);

+                    m_outbounds = true;

+                }

+                else if(lpos.X > _parent_scene.WorldExtents.X)

+                {

+                    _position.X = Util.Clip(lpos.X, _parent_scene.WorldExtents.X + 0.1f, _parent_scene.WorldExtents.X + 2f);

+                    m_outbounds = true;

+                }

+                if (lpos.Y < 0f)

+                {

+                    _position.Y = Util.Clip(lpos.Y, -2f, -0.1f);

+                    m_outbounds = true;

+                }

+                else if(lpos.Y > _parent_scene.WorldExtents.Y)

+                {

+                    _position.Y = Util.Clip(lpos.Y, _parent_scene.WorldExtents.Y + 0.1f, _parent_scene.WorldExtents.Y + 2f);

+                    m_outbounds = true;

+                }

+

+                if(m_outbounds)

+                {

+                    m_lastposition = _position;

+                    m_lastorientation = _orientation;

+

+                    d.Vector3 dtmp = d.BodyGetAngularVel(Body);

+                    m_rotationalVelocity.X = dtmp.X;

+                    m_rotationalVelocity.Y = dtmp.Y;

+                    m_rotationalVelocity.Z = dtmp.Z;

+

+                    dtmp = d.BodyGetLinearVel(Body);

+                    _velocity.X = dtmp.X;

+                    _velocity.Y = dtmp.Y;

+                    _velocity.Z = dtmp.Z;

+

+                    d.BodySetLinearVel(Body, 0, 0, 0); // stop it

+                    d.BodySetAngularVel(Body, 0, 0, 0);

+                    d.GeomSetPosition(prim_geom, _position.X, _position.Y, _position.Z);

+                    disableBodySoft(); // stop collisions

+                    base.RequestPhysicsterseUpdate();

+                    return;

+                }

+

+

+                float fx = 0;

+                float fy = 0;

+                float fz = 0;

+

+                if (m_vehicle != null && m_vehicle.Type != Vehicle.TYPE_NONE)

+                {

+                    // 'VEHICLES' are dealt with in ODEDynamics.cs

+                    m_vehicle.Step();

+                }

+                else

+                {

+                    float m_mass = _mass;

+

+                    //                    fz = 0f;

+                    //m_log.Info(m_collisionFlags.ToString());

+                    if (m_usePID)

+                    {

+

+                        // If the PID Controller isn't active then we set our force

+                        // calculating base velocity to the current position

+

+                        if ((m_PIDTau < 1) && (m_PIDTau != 0))

+                        {

+                            //PID_G = PID_G / m_PIDTau;

+                            m_PIDTau = 1;

+                        }

+

+                        if ((PID_G - m_PIDTau) <= 0)

+                        {

+                            PID_G = m_PIDTau + 1;

+                        }

+

+                        d.Vector3 vel = d.BodyGetLinearVel(Body);

+                        d.Vector3 pos = d.BodyGetPosition(Body);

+                        _target_velocity =

+                            new Vector3(

+                                (m_PIDTarget.X - pos.X) * ((PID_G - m_PIDTau) * timestep),

+                                (m_PIDTarget.Y - pos.Y) * ((PID_G - m_PIDTau) * timestep),

+                                (m_PIDTarget.Z - pos.Z) * ((PID_G - m_PIDTau) * timestep)

+                                );

+

+                        //  if velocity is zero, use position control; otherwise, velocity control

+

+                        if (_target_velocity.ApproxEquals(Vector3.Zero, 0.1f))

+                        {

+                            //  keep track of where we stopped.  No more slippin' & slidin'

+

+                            // We only want to deactivate the PID Controller if we think we want to have our surrogate

+                            // react to the physics scene by moving it's position.

+                            // Avatar to Avatar collisions

+                            // Prim to avatar collisions

+

+                            //fx = (_target_velocity.X - vel.X) * (PID_D) + (_zeroPosition.X - pos.X) * (PID_P * 2);

+                            //fy = (_target_velocity.Y - vel.Y) * (PID_D) + (_zeroPosition.Y - pos.Y) * (PID_P * 2);

+                            //fz = fz + (_target_velocity.Z - vel.Z) * (PID_D) + (_zeroPosition.Z - pos.Z) * PID_P;

+                            d.BodySetPosition(Body, m_PIDTarget.X, m_PIDTarget.Y, m_PIDTarget.Z);

+                            d.BodySetLinearVel(Body, 0, 0, 0);

+                            d.BodyAddForce(Body, 0, 0, fz);

+                            return;

+                        }

+                        else

+                        {

+                            _zeroFlag = false;

+

+                            // We're flying and colliding with something

+                            fx = ((_target_velocity.X) - vel.X) * (PID_D);

+                            fy = ((_target_velocity.Y) - vel.Y) * (PID_D);

+

+                            // vec.Z = (_target_velocity.Z - vel.Z) * PID_D + (_zeroPosition.Z - pos.Z) * PID_P;

+

+                            fz = ((_target_velocity.Z - vel.Z) * (PID_D));

+                        }

+                    }        // end if (m_usePID)

+

+                    // Hover PID Controller needs to be mutually exlusive to MoveTo PID controller

+                    else if (m_useHoverPID)

+                    {

+                        //Console.WriteLine("Hover " +  Name);

+

+                        // If we're using the PID controller, then we have no gravity

+

+                        //  no lock; for now it's only called from within Simulate()

+

+                        // If the PID Controller isn't active then we set our force

+                        // calculating base velocity to the current position

+

+                        if ((m_PIDTau < 1))

+                        {

+                            PID_G = PID_G / m_PIDTau;

+                        }

+

+                        if ((PID_G - m_PIDTau) <= 0)

+                        {

+                            PID_G = m_PIDTau + 1;

+                        }

+

+                        // Where are we, and where are we headed?

+                        d.Vector3 pos = d.BodyGetPosition(Body);

+                        d.Vector3 vel = d.BodyGetLinearVel(Body);

+

+                        //    Non-Vehicles have a limited set of Hover options.

+                        // determine what our target height really is based on HoverType

+                        switch (m_PIDHoverType)

+                        {

+                            case PIDHoverType.Ground:

+                                m_groundHeight = _parent_scene.GetTerrainHeightAtXY(pos.X, pos.Y);

+                                m_targetHoverHeight = m_groundHeight + m_PIDHoverHeight;

+                                break;

+                            case PIDHoverType.GroundAndWater:

+                                m_groundHeight = _parent_scene.GetTerrainHeightAtXY(pos.X, pos.Y);

+                                m_waterHeight = _parent_scene.GetWaterLevel();

+                                if (m_groundHeight > m_waterHeight)

+                                {

+                                    m_targetHoverHeight = m_groundHeight + m_PIDHoverHeight;

+                                }

+                                else

+                                {

+                                    m_targetHoverHeight = m_waterHeight + m_PIDHoverHeight;

+                                }

+                                break;

+

+                        }     // end switch (m_PIDHoverType)

+

+

+                        _target_velocity =

+                            new Vector3(0.0f, 0.0f,

+                                (m_targetHoverHeight - pos.Z) * ((PID_G - m_PIDHoverTau) * timestep)

+                                );

+

+                        //  if velocity is zero, use position control; otherwise, velocity control

+

+                        if (_target_velocity.ApproxEquals(Vector3.Zero, 0.1f))

+                        {

+                            //  keep track of where we stopped.  No more slippin' & slidin'

+

+                            // We only want to deactivate the PID Controller if we think we want to have our surrogate

+                            // react to the physics scene by moving it's position.

+                            // Avatar to Avatar collisions

+                            // Prim to avatar collisions

+

+                            d.BodySetPosition(Body, pos.X, pos.Y, m_targetHoverHeight);

+                            d.BodySetLinearVel(Body, vel.X, vel.Y, 0);

+                            // ?                        d.BodyAddForce(Body, 0, 0, fz);

+                            return;

+                        }

+                        else

+                        {

+                            _zeroFlag = false;

+

+                            // We're flying and colliding with something

+                            fz = ((_target_velocity.Z - vel.Z) * (PID_D));

+                        }

+                    }

+                    else

+                    {

+                        float b = (1.0f - m_buoyancy);

+                        fx = _parent_scene.gravityx * b;

+                        fy = _parent_scene.gravityy * b;

+                        fz = _parent_scene.gravityz * b;

+                    }

+

+                    fx *= m_mass;

+                    fy *= m_mass;

+                    fz *= m_mass;

+

+                    // constant force

+                    fx += m_force.X;

+                    fy += m_force.Y;

+                    fz += m_force.Z;

+

+                    fx += m_forceacc.X;

+                    fy += m_forceacc.Y;

+                    fz += m_forceacc.Z;

+

+                    m_forceacc = Vector3.Zero;

+

+                    //m_log.Info("[OBJPID]: X:" + fx.ToString() + " Y:" + fy.ToString() + " Z:" + fz.ToString());

+                    if (fx != 0 || fy != 0 || fz != 0)

+                    {

+                        d.BodyAddForce(Body, fx, fy, fz);

+                        //Console.WriteLine("AddForce " + fx + "," + fy + "," + fz);

+                    }

+

+                    Vector3 trq;

+

+                    trq = _torque;

+                    trq += m_angularForceacc;

+                    m_angularForceacc = Vector3.Zero;

+                    if (trq.X != 0 || trq.Y != 0 || trq.Z != 0)

+                    {

+                        d.BodyAddTorque(Body, trq.X, trq.Y, trq.Z);

+                    }

+

+                }

+            }

+            else

+            {    // is not physical, or is not a body or is selected

+                //  _zeroPosition = d.BodyGetPosition(Body);

+                return;

+                //Console.WriteLine("Nothing " +  Name);

+

+            }

+        }

+

+

+        public void UpdatePositionAndVelocity(float simulatedtime)

+        {

+            //  no lock; called from Simulate() -- if you call this from elsewhere, gotta lock or do Monitor.Enter/Exit!

+            if (_parent == null && !m_disabled && !m_building && !m_outbounds)

+            {

+                if (Body != IntPtr.Zero)

+                {

+                    Vector3 pv = Vector3.Zero;

+                    bool lastZeroFlag = _zeroFlag;

+

+                    d.Vector3 lpos;

+                    d.GeomCopyPosition(prim_geom, out lpos); // root position that is seem by rest of simulator

+

+

+                    d.Quaternion ori;

+                    d.GeomCopyQuaternion(prim_geom, out ori);

+                    d.Vector3 vel = d.BodyGetLinearVel(Body);

+                    d.Vector3 rotvel = d.BodyGetAngularVel(Body);

+

+                    if ((Math.Abs(m_lastposition.X - lpos.X) < 0.01)

+                        && (Math.Abs(m_lastposition.Y - lpos.Y) < 0.01)

+                        && (Math.Abs(m_lastposition.Z - lpos.Z) < 0.01)

+                        && (Math.Abs(m_lastorientation.X - ori.X) < 0.0001)

+                        && (Math.Abs(m_lastorientation.Y - ori.Y) < 0.0001)

+                        && (Math.Abs(m_lastorientation.Z - ori.Z) < 0.0001)

+                        )

+                    {

+                        _zeroFlag = true;

+                        //Console.WriteLine("ZFT 2");

+                        m_throttleUpdates = false;

+                    }

+                    else

+                    {

+                        //m_log.Debug(Math.Abs(m_lastposition.X - l_position.X).ToString());

+                        _zeroFlag = false;

+                        m_lastUpdateSent = false;

+                        //m_throttleUpdates = false;

+                    }

+

+                    if (_zeroFlag)

+                    {

+                        m_lastposition = _position;

+                        m_lastorientation = _orientation;

+

+                        _velocity.X = 0.0f;

+                        _velocity.Y = 0.0f;

+                        _velocity.Z = 0.0f;

+

+                        _acceleration.X = 0;

+                        _acceleration.Y = 0;

+                        _acceleration.Z = 0;

+

+                        m_rotationalVelocity.X = 0;

+                        m_rotationalVelocity.Y = 0;

+                        m_rotationalVelocity.Z = 0;

+                        if (!m_lastUpdateSent)

+                        {

+                            m_throttleUpdates = false;

+                            throttleCounter = 0;

+                            m_rotationalVelocity = pv;

+

+                            base.RequestPhysicsterseUpdate();

+

+                            m_lastUpdateSent = true;

+                        }

+                    }

+                    else

+                    {

+                        if (lastZeroFlag != _zeroFlag)

+                        {

+                            base.RequestPhysicsterseUpdate();

+                        }

+

+                        m_lastVelocity = _velocity;

+

+                        _position.X = lpos.X;

+                        _position.Y = lpos.Y;

+                        _position.Z = lpos.Z;

+

+                        _velocity.X = vel.X;

+                        _velocity.Y = vel.Y;

+                        _velocity.Z = vel.Z;

+

+                        _orientation.X = ori.X;

+                        _orientation.Y = ori.Y;

+                        _orientation.Z = ori.Z;

+                        _orientation.W = ori.W;

+

+                        _acceleration = ((_velocity - m_lastVelocity) / simulatedtime);

+

+                        if (m_rotationalVelocity.ApproxEquals(pv, 0.0001f))

+                        {

+                            m_rotationalVelocity = pv;

+                        }

+                        else

+                        {

+                            m_rotationalVelocity.X = rotvel.X;

+                            m_rotationalVelocity.Y = rotvel.Y;

+                            m_rotationalVelocity.Z = rotvel.Z;

+                        }

+

+                        m_lastUpdateSent = false;

+                        if (!m_throttleUpdates || throttleCounter > _parent_scene.geomUpdatesPerThrottledUpdate)

+                        {

+                            m_lastposition = _position;

+                            m_lastorientation = _orientation;

+                            base.RequestPhysicsterseUpdate();

+                        }

+                        else

+                        {

+                            throttleCounter++;

+                        }

+                    }

+                }

+                else if (!m_lastUpdateSent || !_zeroFlag)

+                {

+                    // Not a body..   so Make sure the client isn't interpolating

+                    _velocity.X = 0;

+                    _velocity.Y = 0;

+                    _velocity.Z = 0;

+

+                    _acceleration.X = 0;

+                    _acceleration.Y = 0;

+                    _acceleration.Z = 0;

+

+                    m_rotationalVelocity.X = 0;

+                    m_rotationalVelocity.Y = 0;

+                    m_rotationalVelocity.Z = 0;

+                    _zeroFlag = true;

+

+                    if (!m_lastUpdateSent)

+                    {

+                        m_throttleUpdates = false;

+                        throttleCounter = 0;

+

+                        base.RequestPhysicsterseUpdate();

+

+                        m_lastUpdateSent = true;

+                    }

+                }

+            }

+        }

+

+        internal static bool QuaternionIsFinite(Quaternion q)

+        {

+            if (Single.IsNaN(q.X) || Single.IsInfinity(q.X))

+                return false;

+            if (Single.IsNaN(q.Y) || Single.IsInfinity(q.Y))

+                return false;

+            if (Single.IsNaN(q.Z) || Single.IsInfinity(q.Z))

+                return false;

+            if (Single.IsNaN(q.W) || Single.IsInfinity(q.W))

+                return false;

+            return true;

+        }

+

+        internal static void DMassCopy(ref d.Mass src, ref d.Mass dst)

+        {

+            dst.c.W = src.c.W;

+            dst.c.X = src.c.X;

+            dst.c.Y = src.c.Y;

+            dst.c.Z = src.c.Z;

+            dst.mass = src.mass;

+            dst.I.M00 = src.I.M00;

+            dst.I.M01 = src.I.M01;

+            dst.I.M02 = src.I.M02;

+            dst.I.M10 = src.I.M10;

+            dst.I.M11 = src.I.M11;

+            dst.I.M12 = src.I.M12;

+            dst.I.M20 = src.I.M20;

+            dst.I.M21 = src.I.M21;

+            dst.I.M22 = src.I.M22;

+        }

+

+        private static void DMassDup(ref d.Mass src, out d.Mass dst)

+        {

+            dst = new d.Mass { };

+

+            dst.c.W = src.c.W;

+            dst.c.X = src.c.X;

+            dst.c.Y = src.c.Y;

+            dst.c.Z = src.c.Z;

+            dst.mass = src.mass;

+            dst.I.M00 = src.I.M00;

+            dst.I.M01 = src.I.M01;

+            dst.I.M02 = src.I.M02;

+            dst.I.M10 = src.I.M10;

+            dst.I.M11 = src.I.M11;

+            dst.I.M12 = src.I.M12;

+            dst.I.M20 = src.I.M20;

+            dst.I.M21 = src.I.M21;

+            dst.I.M22 = src.I.M22;

+        }

+        private void donullchange()

+        {

+        }

+

+        public bool DoAChange(changes what, object arg)

+        {

+            if (prim_geom == IntPtr.Zero && what != changes.Add && what != changes.Remove)

+            {

+                return false;

+            }

+

+            // nasty switch

+            switch (what)

+            {

+                case changes.Add:

+                    changeadd();

+                    break;

+                case changes.Remove:

+                    //If its being removed, we don't want to rebuild the physical rep at all, so ignore this stuff...

+                    //When we return true, it destroys all of the prims in the linkset anyway

+                    if (_parent != null)

+                    {

+                        OdePrim parent = (OdePrim)_parent;

+                        parent.ChildRemove(this, false);

+                    }

+                    else

+                        ChildRemove(this, false);

+

+                    m_vehicle = null;

+                    RemoveGeom();

+                    m_targetSpace = IntPtr.Zero;

+                    if (m_eventsubscription > 0)

+                        UnSubscribeEvents();

+                    return true;

+

+                case changes.Link:

+                    OdePrim tmp = (OdePrim)arg;

+                    changeLink(tmp);

+                    break;

+

+                case changes.DeLink:

+                    changeLink(null);

+                    break;

+

+                case changes.Position:

+                    changePosition((Vector3)arg);

+                    break;

+

+                case changes.Orientation:

+                    changeOrientation((Quaternion)arg);

+                    break;

+

+                case changes.PosOffset:

+                    donullchange();

+                    break;

+

+                case changes.OriOffset:

+                    donullchange();

+                    break;

+

+                case changes.Velocity:

+                    changevelocity((Vector3)arg);

+                    break;

+

+                //                case changes.Acceleration:

+                //                    changeacceleration((Vector3)arg);

+                //                    break;

+                //                case changes.AngVelocity:

+                //                    changeangvelocity((Vector3)arg);

+                //                    break;

+

+                case changes.Force:

+                    changeForce((Vector3)arg);

+                    break;

+

+                case changes.Torque:

+                    changeSetTorque((Vector3)arg);

+                    break;

+

+                case changes.AddForce:

+                    changeAddForce((Vector3)arg);

+                    break;

+

+                case changes.AddAngForce:

+                    changeAddAngularForce((Vector3)arg);

+                    break;

+

+                case changes.AngLock:

+                    changeAngularLock((Vector3)arg);

+                    break;

+

+                case changes.Size:

+                    changeSize((Vector3)arg);

+                    break;

+

+                case changes.Shape:

+                    changeShape((PrimitiveBaseShape)arg);

+                    break;

+

+                case changes.CollidesWater:

+                    changeFloatOnWater((bool)arg);

+                    break;

+

+                case changes.VolumeDtc:

+                    changeVolumedetetion((bool)arg);

+                    break;

+

+                case changes.Phantom:

+                    changePhantomStatus((bool)arg);

+                    break;

+

+                case changes.Physical:

+                    changePhysicsStatus((bool)arg);

+                    break;

+

+                case changes.Selected:

+                    changeSelectedStatus((bool)arg);

+                    break;

+

+                case changes.disabled:

+                    changeDisable((bool)arg);

+                    break;

+

+                case changes.building:

+                    changeBuilding((bool)arg);

+                    break;

+

+                case changes.VehicleType:

+                    changeVehicleType((int)arg);

+                    break;

+

+                case changes.VehicleFlags:

+                    changeVehicleFlags((strVehicleBoolParam) arg);

+                    break;

+

+                case changes.VehicleFloatParam:

+                    changeVehicleFloatParam((strVehicleFloatParam) arg);

+                    break;

+

+                case changes.VehicleVectorParam:

+                    changeVehicleVectorParam((strVehicleVectorParam) arg);

+                    break;

+

+                case changes.VehicleRotationParam:

+                    changeVehicleRotationParam((strVehicleQuatParam) arg);

+                    break;

+

+                case changes.SetVehicle:

+                    changeSetVehicle((VehicleData) arg);

+                    break;

+                case changes.Null:

+                    donullchange();

+                    break;

+

+                default:

+                    donullchange();

+                    break;

+            }

+            return false;

+        }

+

+        public void AddChange(changes what, object arg)

+        {

+            _parent_scene.AddChange((PhysicsActor) this, what, arg);

+        }

+

+

+        private struct strVehicleBoolParam

+        {

+            public int param;

+            public bool value;

+        }

+

+        private struct strVehicleFloatParam

+        {

+            public int param;

+            public float value;

+        }

+

+        private struct strVehicleQuatParam

+        {

+            public int param;

+            public Quaternion value;

+        }

+

+        private struct strVehicleVectorParam

+        {

+            public int param;

+            public Vector3 value;

+        }

+    }

 }
\ No newline at end of file