18 files changed, 647 insertions, 308 deletions

diff --git a/OpenSim/Region/CoreModules/Avatar/Attachments/AttachmentsModule.cs b/OpenSim/Region/CoreModules/Avatar/Attachments/AttachmentsModule.cs
index 8e886d4..e711afb 100644
--- a/OpenSim/Region/CoreModules/Avatar/Attachments/AttachmentsModule.cs
+++ b/OpenSim/Region/CoreModules/Avatar/Attachments/AttachmentsModule.cs
@@ -475,6 +475,11 @@ namespace OpenSim.Region.CoreModules.Avatar.Attachments
 
         public void DetachSingleAttachmentToGround(IScenePresence sp, uint soLocalId)
         {
+            DetachSingleAttachmentToGround(sp, soLocalId, sp.AbsolutePosition, Quaternion.Identity);
+        }
+
+        public void DetachSingleAttachmentToGround(IScenePresence sp, uint soLocalId, Vector3 absolutePos, Quaternion absoluteRot)
+        {
             if (!Enabled)
                 return;
 
@@ -516,7 +521,11 @@ namespace OpenSim.Region.CoreModules.Avatar.Attachments
                 so.FromItemID = UUID.Zero;
 
                 SceneObjectPart rootPart = so.RootPart;
-                so.AbsolutePosition = sp.AbsolutePosition;
+                so.AbsolutePosition = absolutePos;
+                if (absoluteRot != Quaternion.Identity)
+                {
+                    so.UpdateGroupRotationR(absoluteRot);
+                }
                 so.AttachedAvatar = UUID.Zero;
                 rootPart.SetParentLocalId(0);
                 so.ClearPartAttachmentData();
diff --git a/OpenSim/Region/CoreModules/Avatar/Inventory/Transfer/InventoryTransferModule.cs b/OpenSim/Region/CoreModules/Avatar/Inventory/Transfer/InventoryTransferModule.cs
index 81de29c..c14cb17 100644
--- a/OpenSim/Region/CoreModules/Avatar/Inventory/Transfer/InventoryTransferModule.cs
+++ b/OpenSim/Region/CoreModules/Avatar/Inventory/Transfer/InventoryTransferModule.cs
@@ -313,6 +313,45 @@ namespace OpenSim.Region.CoreModules.Avatar.Inventory.Transfer
                         m_TransferModule.SendInstantMessage(im, delegate(bool success) {});
                 }
             }
+            else if (im.dialog == (byte) InstantMessageDialog.TaskInventoryAccepted)
+            {
+                UUID destinationFolderID = UUID.Zero;
+
+                if (im.binaryBucket != null && im.binaryBucket.Length >= 16)
+                {
+                    destinationFolderID = new UUID(im.binaryBucket, 0);
+                }
+
+                if (destinationFolderID != UUID.Zero)
+                {
+                    IInventoryService invService = scene.InventoryService;
+
+                    UUID inventoryID = new UUID(im.imSessionID); // The inventory item/folder, back from it's trip
+
+                    InventoryItemBase item = new InventoryItemBase(inventoryID, client.AgentId);
+                    item = invService.GetItem(item);
+                    InventoryFolderBase folder = null;
+
+                    if (item != null) // It's an item
+                    {
+                        item.Folder = destinationFolderID;
+
+                        invService.DeleteItems(item.Owner, new List<UUID>() { item.ID });
+                        scene.AddInventoryItem(client, item);
+                    }
+                    else
+                    {
+                        folder = new InventoryFolderBase(inventoryID, client.AgentId);
+                        folder = invService.GetFolder(folder);
+
+                        if (folder != null) // It's a folder
+                        {
+                            folder.ParentID = destinationFolderID;
+                            invService.MoveFolder(folder);
+                        }
+                    }
+                }
+            }
             else if (
                 im.dialog == (byte)InstantMessageDialog.InventoryDeclined
                 || im.dialog == (byte)InstantMessageDialog.TaskInventoryDeclined)
diff --git a/OpenSim/Region/CoreModules/Framework/Statistics/Logging/LogWriter.cs b/OpenSim/Region/CoreModules/Framework/Statistics/Logging/LogWriter.cs
index 65e4c90..fd8d5e3 100755
--- a/OpenSim/Region/CoreModules/Framework/Statistics/Logging/LogWriter.cs
+++ b/OpenSim/Region/CoreModules/Framework/Statistics/Logging/LogWriter.cs
@@ -1,161 +1,170 @@
-/*

- * Copyright (c) Contributors, http://opensimulator.org/

- * See CONTRIBUTORS.TXT for a full list of copyright holders.

- *

- * Redistribution and use in source and binary forms, with or without

- * modification, are permitted provided that the following conditions are met:

- *     * Redistributions of source code must retain the above copyright

- *       notice, this list of conditions and the following disclaimer.

- *     * Redistributions in binary form must reproduce the above copyright

- *       notice, this list of conditions and the following disclaimer in the

- *       documentation and/or other materials provided with the distribution.

- *     * Neither the name of the OpenSimulator Project nor the

- *       names of its contributors may be used to endorse or promote products

- *       derived from this software without specific prior written permission.

- *

- * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY

- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

- * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY

- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;

- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND

- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS

- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

- */

-

-using System;

-using System.IO;

-using System.Text;

-using log4net;

-

-namespace OpenSim.Region.CoreModules.Framework.Statistics.Logging

-{

-    /// <summary>

-    /// Class for writing a high performance, high volume log file.

-    /// Sometimes, to debug, one has a high volume logging to do and the regular

-    /// log file output is not appropriate.

-    /// Create a new instance with the parameters needed and

-    /// call Write() to output a line. Call Close() when finished.

-    /// If created with no parameters, it will not log anything.

-    /// </summary>

-    public class LogWriter : IDisposable

-    {

-        public bool Enabled { get; private set; }

-

-        private string m_logDirectory = ".";

-        private int m_logMaxFileTimeMin = 5;    // 5 minutes

-        public String LogFileHeader { get; set; }

-

-        private StreamWriter m_logFile = null;

-        private TimeSpan m_logFileLife;

-        private DateTime m_logFileEndTime;

-        private Object m_logFileWriteLock = new Object();

-

-        // set externally when debugging. If let 'null', this does not write any error messages.

-        public ILog ErrorLogger = null;

-        private string LogHeader = "[LOG WRITER]";

-

-        /// <summary>

-        /// Create a log writer that will not write anything. Good for when not enabled

-        /// but the write statements are still in the code.

-        /// </summary>

-        public LogWriter()

-        {

-            Enabled = false;

-            m_logFile = null;

-        }

-

-        /// <summary>

-        /// Create a log writer instance.

-        /// </summary>

-        /// <param name="dir">The directory to create the log file in. May be 'null' for default.</param>

-        /// <param name="headr">The characters that begin the log file name. May be 'null' for default.</param>

-        /// <param name="maxFileTime">Maximum age of a log file in minutes. If zero, will set default.</param>

-        public LogWriter(string dir, string headr, int maxFileTime)

-        {

-            m_logDirectory = dir == null ? "." : dir;

-

-            LogFileHeader = headr == null ? "log-" : headr;

-

-            m_logMaxFileTimeMin = maxFileTime;

-            if (m_logMaxFileTimeMin < 1)

-                m_logMaxFileTimeMin = 5;

-

-            m_logFileLife = new TimeSpan(0, m_logMaxFileTimeMin, 0);

-            m_logFileEndTime = DateTime.Now + m_logFileLife;

-

-            Enabled = true;

-        }

-

-        public void Dispose()

-        {

-            this.Close();

-        }

-

-        public void Close()

-        {

-            Enabled = false;

-            if (m_logFile != null)

-            {

-                m_logFile.Close();

-                m_logFile.Dispose();

-                m_logFile = null;

-            }

-        }

-

-        public void Write(string line, params object[] args)

-        {

-            if (!Enabled) return;

-            Write(String.Format(line, args));

-        }

-

-        public void Write(string line)

-        {

-            if (!Enabled) return;

-            try

-            {

-                lock (m_logFileWriteLock)

-                {

-                    DateTime now = DateTime.Now;

-                    if (m_logFile == null || now > m_logFileEndTime)

-                    {

-                        if (m_logFile != null)

-                        {

-                            m_logFile.Close();

-                            m_logFile.Dispose();

-                            m_logFile = null;

-                        }

-

-                        // First log file or time has expired, start writing to a new log file

-                        m_logFileEndTime = now + m_logFileLife;

-                        string path = (m_logDirectory.Length > 0 ? m_logDirectory

-                                    + System.IO.Path.DirectorySeparatorChar.ToString() : "")

-                                + String.Format("{0}{1}.log", LogFileHeader, now.ToString("yyyyMMddHHmmss"));

-                        m_logFile = new StreamWriter(File.Open(path, FileMode.Append, FileAccess.Write));

-                    }

-                    if (m_logFile != null)

-                    {

-                        StringBuilder buff = new StringBuilder(line.Length + 25);

-                        buff.Append(now.ToString("yyyyMMddHHmmssfff"));

-                        // buff.Append(now.ToString("yyyyMMddHHmmss"));

-                        buff.Append(",");

-                        buff.Append(line);

-                        buff.Append("\r\n");

-                        m_logFile.Write(buff.ToString());

-                    }

-                }

-            }

-            catch (Exception e)

-            {

-                if (ErrorLogger != null)

-                {

-                    ErrorLogger.ErrorFormat("{0}: FAILURE WRITING TO LOGFILE: {1}", LogHeader, e);

-                }

-                Enabled = false;

-            }

-            return;

-        }

-    }

-}
\ No newline at end of file
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+using System;
+using System.IO;
+using System.Text;
+using log4net;
+
+namespace OpenSim.Region.CoreModules.Framework.Statistics.Logging
+{
+    /// <summary>
+    /// Class for writing a high performance, high volume log file.
+    /// Sometimes, to debug, one has a high volume logging to do and the regular
+    /// log file output is not appropriate.
+    /// Create a new instance with the parameters needed and
+    /// call Write() to output a line. Call Close() when finished.
+    /// If created with no parameters, it will not log anything.
+    /// </summary>
+    public class LogWriter : IDisposable
+    {
+        public bool Enabled { get; private set; }
+
+        private string m_logDirectory = ".";
+        private int m_logMaxFileTimeMin = 5;    // 5 minutes
+        public String LogFileHeader { get; set; }
+
+        private StreamWriter m_logFile = null;
+        private TimeSpan m_logFileLife;
+        private DateTime m_logFileEndTime;
+        private Object m_logFileWriteLock = new Object();
+
+        // set externally when debugging. If let 'null', this does not write any error messages.
+        public ILog ErrorLogger = null;
+        private string LogHeader = "[LOG WRITER]";
+
+        /// <summary>
+        /// Create a log writer that will not write anything. Good for when not enabled
+        /// but the write statements are still in the code.
+        /// </summary>
+        public LogWriter()
+        {
+            Enabled = false;
+            m_logFile = null;
+        }
+
+        /// <summary>
+        /// Create a log writer instance.
+        /// </summary>
+        /// <param name="dir">The directory to create the log file in. May be 'null' for default.</param>
+        /// <param name="headr">The characters that begin the log file name. May be 'null' for default.</param>
+        /// <param name="maxFileTime">Maximum age of a log file in minutes. If zero, will set default.</param>
+        public LogWriter(string dir, string headr, int maxFileTime)
+        {
+            m_logDirectory = dir == null ? "." : dir;
+
+            LogFileHeader = headr == null ? "log-" : headr;
+
+            m_logMaxFileTimeMin = maxFileTime;
+            if (m_logMaxFileTimeMin < 1)
+                m_logMaxFileTimeMin = 5;
+
+            m_logFileLife = new TimeSpan(0, m_logMaxFileTimeMin, 0);
+            m_logFileEndTime = DateTime.Now + m_logFileLife;
+
+            Enabled = true;
+        }
+
+        public void Dispose()
+        {
+            this.Close();
+        }
+
+        public void Close()
+        {
+            Enabled = false;
+            if (m_logFile != null)
+            {
+                m_logFile.Close();
+                m_logFile.Dispose();
+                m_logFile = null;
+            }
+        }
+
+        public void Write(string line, params object[] args)
+        {
+            if (!Enabled) return;
+            Write(String.Format(line, args));
+        }
+
+        public void Flush()
+        {
+            if (!Enabled) return;
+            if (m_logFile != null)
+            {
+                m_logFile.Flush();
+            }
+        }
+
+        public void Write(string line)
+        {
+            if (!Enabled) return;
+            try
+            {
+                lock (m_logFileWriteLock)
+                {
+                    DateTime now = DateTime.Now;
+                    if (m_logFile == null || now > m_logFileEndTime)
+                    {
+                        if (m_logFile != null)
+                        {
+                            m_logFile.Close();
+                            m_logFile.Dispose();
+                            m_logFile = null;
+                        }
+
+                        // First log file or time has expired, start writing to a new log file
+                        m_logFileEndTime = now + m_logFileLife;
+                        string path = (m_logDirectory.Length > 0 ? m_logDirectory
+                                    + System.IO.Path.DirectorySeparatorChar.ToString() : "")
+                                + String.Format("{0}{1}.log", LogFileHeader, now.ToString("yyyyMMddHHmmss"));
+                        m_logFile = new StreamWriter(File.Open(path, FileMode.Append, FileAccess.Write));
+                    }
+                    if (m_logFile != null)
+                    {
+                        StringBuilder buff = new StringBuilder(line.Length + 25);
+                        buff.Append(now.ToString("yyyyMMddHHmmssfff"));
+                        // buff.Append(now.ToString("yyyyMMddHHmmss"));
+                        buff.Append(",");
+                        buff.Append(line);
+                        buff.Append("\r\n");
+                        m_logFile.Write(buff.ToString());
+                    }
+                }
+            }
+            catch (Exception e)
+            {
+                if (ErrorLogger != null)
+                {
+                    ErrorLogger.ErrorFormat("{0}: FAILURE WRITING TO LOGFILE: {1}", LogHeader, e);
+                }
+                Enabled = false;
+            }
+            return;
+        }
+    }
+}
diff --git a/OpenSim/Region/Framework/Interfaces/IAttachmentsModule.cs b/OpenSim/Region/Framework/Interfaces/IAttachmentsModule.cs
index 90a13a7..d781eae 100644
--- a/OpenSim/Region/Framework/Interfaces/IAttachmentsModule.cs
+++ b/OpenSim/Region/Framework/Interfaces/IAttachmentsModule.cs
@@ -114,6 +114,15 @@ namespace OpenSim.Region.Framework.Interfaces
         void DetachSingleAttachmentToGround(IScenePresence sp, uint objectLocalID);
 
         /// <summary>
+        /// Detach the given item to the ground at the specified coordinates & rotation
+        /// </summary>
+        /// <param name="sp"></param>
+        /// <param name="objectLocalID"></param>
+        /// <param name="absolutePos"></param>
+        /// <param name="absoluteRot"></param>
+        void DetachSingleAttachmentToGround(IScenePresence sp, uint objectLocalID, Vector3 absolutePos, Quaternion absoluteRot);
+
+        /// <summary>
         /// Detach the given attachment so that it remains in the user's inventory.
         /// </summary>
         /// <param name="sp">/param>
diff --git a/OpenSim/Region/Framework/Scenes/Scene.cs b/OpenSim/Region/Framework/Scenes/Scene.cs
index 29c8eb1..6e3e436 100644
--- a/OpenSim/Region/Framework/Scenes/Scene.cs
+++ b/OpenSim/Region/Framework/Scenes/Scene.cs
@@ -5958,6 +5958,9 @@ Environment.Exit(1);
 
         public void StoreExtraSetting(string name, string val)
         {
+            if (m_extraSettings == null)
+                return;
+
             string oldVal;
 
             if (m_extraSettings.TryGetValue(name, out oldVal))
@@ -5975,6 +5978,9 @@ Environment.Exit(1);
 
         public void RemoveExtraSetting(string name)
         {
+            if (m_extraSettings == null)
+                return;
+
             if (!m_extraSettings.ContainsKey(name))
                 return;
 
diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSCharacter.cs b/OpenSim/Region/Physics/BulletSPlugin/BSCharacter.cs
index b88ec3c..2a52e01 100644
--- a/OpenSim/Region/Physics/BulletSPlugin/BSCharacter.cs
+++ b/OpenSim/Region/Physics/BulletSPlugin/BSCharacter.cs
@@ -218,6 +218,18 @@ public class BSCharacter : BSPhysObject
             });
         }
     }
+    public override OMV.Vector3 ForcePosition {
+        get {
+            _position = BulletSimAPI.GetPosition2(BSBody.ptr);
+            return _position;
+        }
+        set {
+            _position = value;
+            PositionSanityCheck();
+            BulletSimAPI.SetTranslation2(BSBody.ptr, _position, _orientation);
+        }
+    }
+
 
     // Check that the current position is sane and, if not, modify the position to make it so.
     // Check for being below terrain and being out of bounds.
@@ -234,6 +246,15 @@ public class BSCharacter : BSPhysObject
             _position.Z = terrainHeight + 2.0f;
             ret = true;
         }
+        if ((CurrentCollisionFlags & CollisionFlags.BS_FLOATS_ON_WATER) != 0)
+        {
+            float waterHeight = PhysicsScene.GetWaterLevelAtXYZ(_position);
+            if (Position.Z < waterHeight)
+            {
+                _position.Z = waterHeight;
+                ret = true;
+            }
+        }
 
         // TODO: check for out of bounds
         return ret;
@@ -242,18 +263,22 @@ public class BSCharacter : BSPhysObject
     // A version of the sanity check that also makes sure a new position value is
     //    pushed back to the physics engine. This routine would be used by anyone
     //    who is not already pushing the value.
-    private bool PositionSanityCheck2()
+    private bool PositionSanityCheck2(bool atTaintTime)
     {
         bool ret = false;
         if (PositionSanityCheck())
         {
             // The new position value must be pushed into the physics engine but we can't
             //    just assign to "Position" because of potential call loops.
-            PhysicsScene.TaintedObject("BSCharacter.PositionSanityCheck", delegate()
+            BSScene.TaintCallback sanityOperation = delegate()
             {
                 DetailLog("{0},BSCharacter.PositionSanityCheck,taint,pos={1},orient={2}", LocalID, _position, _orientation);
                 BulletSimAPI.SetObjectTranslation(PhysicsScene.WorldID, LocalID, _position, _orientation);
-            });
+            };
+            if (atTaintTime)
+                sanityOperation();
+            else
+                PhysicsScene.TaintedObject("BSCharacter.PositionSanityCheck", sanityOperation);
             ret = true;
         }
         return ret;
@@ -333,6 +358,20 @@ public class BSCharacter : BSPhysObject
             });
         }
     }
+    // Go directly to Bullet to get/set the value. 
+    public override OMV.Quaternion ForceOrientation
+    {
+        get
+        {
+            _orientation = BulletSimAPI.GetOrientation2(BSBody.ptr);
+            return _orientation;
+        }
+        set
+        {
+            _orientation = value;
+            BulletSimAPI.SetTranslation2(BSBody.ptr, _position, _orientation);
+        }
+    }
     public override int PhysicsActorType {
         get { return _physicsActorType; }
         set { _physicsActorType = value;
@@ -378,7 +417,16 @@ public class BSCharacter : BSPhysObject
         set { _collidingObj = value; }
     }
     public override bool FloatOnWater {
-        set { _floatOnWater = value; }
+        set { 
+            _floatOnWater = value;
+            PhysicsScene.TaintedObject("BSCharacter.setFloatOnWater", delegate()
+            {
+                if (_floatOnWater)
+                    CurrentCollisionFlags = BulletSimAPI.AddToCollisionFlags2(BSBody.ptr, CollisionFlags.BS_FLOATS_ON_WATER);
+                else
+                    CurrentCollisionFlags = BulletSimAPI.RemoveFromCollisionFlags2(BSBody.ptr, CollisionFlags.BS_FLOATS_ON_WATER);
+            });
+        }
     }
     public override OMV.Vector3 RotationalVelocity {
         get { return _rotationalVelocity; }
@@ -493,15 +541,14 @@ public class BSCharacter : BSPhysObject
         _velocity = entprop.Velocity;
         _acceleration = entprop.Acceleration;
         _rotationalVelocity = entprop.RotationalVelocity;
+        // Do some sanity checking for the avatar. Make sure it's above ground and inbounds.
+        PositionSanityCheck2(true);
+
         // Avatars don't report their changes the usual way. Changes are checked for in the heartbeat loop.
         // base.RequestPhysicsterseUpdate();
 
-        // Do some sanity checking for the avatar. Make sure it's above ground and inbounds.
-        PositionSanityCheck2();
-
-        float heightHere = PhysicsScene.TerrainManager.GetTerrainHeightAtXYZ(_position);   // only for debug
-        DetailLog("{0},BSCharacter.UpdateProperties,call,pos={1},orient={2},vel={3},accel={4},rotVel={5},terrain={6}",
-                LocalID, _position, _orientation, _velocity, _acceleration, _rotationalVelocity, heightHere);
+        DetailLog("{0},BSCharacter.UpdateProperties,call,pos={1},orient={2},vel={3},accel={4},rotVel={5}",
+                LocalID, _position, _orientation, _velocity, _acceleration, _rotationalVelocity);
     }
 }
 }
diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSDynamics.cs b/OpenSim/Region/Physics/BulletSPlugin/BSDynamics.cs
index 65b38d6..4ba2f62 100644
--- a/OpenSim/Region/Physics/BulletSPlugin/BSDynamics.cs
+++ b/OpenSim/Region/Physics/BulletSPlugin/BSDynamics.cs
@@ -92,7 +92,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin
         private float m_angularMotorDecayTimescale = 0;                 // motor angular velocity decay rate
         private Vector3 m_angularFrictionTimescale = Vector3.Zero;      // body angular velocity  decay rate
         private Vector3 m_lastAngularVelocity = Vector3.Zero;           // what was last applied to body
- //       private Vector3 m_lastVertAttractor = Vector3.Zero;             // what VA was last applied to body
+        private Vector3 m_lastVertAttractor = Vector3.Zero;             // what VA was last applied to body
 
         //Deflection properties
         // private float m_angularDeflectionEfficiency = 0;
@@ -138,74 +138,55 @@ namespace OpenSim.Region.Physics.BulletSPlugin
             switch (pParam)
             {
                 case Vehicle.ANGULAR_DEFLECTION_EFFICIENCY:
-                    if (pValue < 0.01f) pValue = 0.01f;
-                    // m_angularDeflectionEfficiency = pValue;
+                    // m_angularDeflectionEfficiency = Math.Max(pValue, 0.01f);
                     break;
                 case Vehicle.ANGULAR_DEFLECTION_TIMESCALE:
-                    if (pValue < 0.01f) pValue = 0.01f;
-                    // m_angularDeflectionTimescale = pValue;
+                    // m_angularDeflectionTimescale = Math.Max(pValue, 0.01f);
                     break;
                 case Vehicle.ANGULAR_MOTOR_DECAY_TIMESCALE:
-                    if (pValue < 0.01f) pValue = 0.01f;
-                    m_angularMotorDecayTimescale = pValue;
+                    m_angularMotorDecayTimescale = Math.Max(pValue, 0.01f);
                     break;
                 case Vehicle.ANGULAR_MOTOR_TIMESCALE:
-                    if (pValue < 0.01f) pValue = 0.01f;
-                    m_angularMotorTimescale = pValue;
+                    m_angularMotorTimescale = Math.Max(pValue, 0.01f);
                     break;
                 case Vehicle.BANKING_EFFICIENCY:
-                    if (pValue < 0.01f) pValue = 0.01f;
-                    // m_bankingEfficiency = pValue;
+                    // m_bankingEfficiency = Math.Max(pValue, 0.01f);
                     break;
                 case Vehicle.BANKING_MIX:
-                    if (pValue < 0.01f) pValue = 0.01f;
-                    // m_bankingMix = pValue;
+                    // m_bankingMix = Math.Max(pValue, 0.01f);
                     break;
                 case Vehicle.BANKING_TIMESCALE:
-                    if (pValue < 0.01f) pValue = 0.01f;
-                    // m_bankingTimescale = pValue;
+                    // m_bankingTimescale = Math.Max(pValue, 0.01f);
                     break;
                 case Vehicle.BUOYANCY:
-                    if (pValue < -1f) pValue = -1f;
-                    if (pValue > 1f) pValue = 1f;
-                    m_VehicleBuoyancy = pValue;
+                    m_VehicleBuoyancy = Math.Max(-1f, Math.Min(pValue, 1f));
                     break;
 //                case Vehicle.HOVER_EFFICIENCY:
-//                    if (pValue < 0f) pValue = 0f;
-//                    if (pValue > 1f) pValue = 1f;
-//                    m_VhoverEfficiency = pValue;
+//                    m_VhoverEfficiency = Math.Max(0f, Math.Min(pValue, 1f));
 //                    break;
                 case Vehicle.HOVER_HEIGHT:
                     m_VhoverHeight = pValue;
                     break;
                 case Vehicle.HOVER_TIMESCALE:
-                    if (pValue < 0.01f) pValue = 0.01f;
-                    m_VhoverTimescale = pValue;
+                    m_VhoverTimescale = Math.Max(pValue, 0.01f);
                     break;
                 case Vehicle.LINEAR_DEFLECTION_EFFICIENCY:
-                    if (pValue < 0.01f) pValue = 0.01f;
-                    // m_linearDeflectionEfficiency = pValue;
+                    // m_linearDeflectionEfficiency = Math.Max(pValue, 0.01f);
                     break;
                 case Vehicle.LINEAR_DEFLECTION_TIMESCALE:
-                    if (pValue < 0.01f) pValue = 0.01f;
-                    // m_linearDeflectionTimescale = pValue;
+                    // m_linearDeflectionTimescale = Math.Max(pValue, 0.01f);
                     break;
                 case Vehicle.LINEAR_MOTOR_DECAY_TIMESCALE:
-                    if (pValue < 0.01f) pValue = 0.01f;
-                    m_linearMotorDecayTimescale = pValue;
+                    m_linearMotorDecayTimescale = Math.Max(pValue, 0.01f);
                     break;
                 case Vehicle.LINEAR_MOTOR_TIMESCALE:
-                    if (pValue < 0.01f) pValue = 0.01f;
-                    m_linearMotorTimescale = pValue;
+                    m_linearMotorTimescale = Math.Max(pValue, 0.01f);
                     break;
                 case Vehicle.VERTICAL_ATTRACTION_EFFICIENCY:
-                    if (pValue < 0.1f) pValue = 0.1f;    // Less goes unstable
-                    if (pValue > 1.0f) pValue = 1.0f;
-                    m_verticalAttractionEfficiency = pValue;
+                    m_verticalAttractionEfficiency = Math.Max(0.1f, Math.Min(pValue, 1f));
                     break;
                 case Vehicle.VERTICAL_ATTRACTION_TIMESCALE:
-                    if (pValue < 0.01f) pValue = 0.01f;
-                    m_verticalAttractionTimescale = pValue;
+                    m_verticalAttractionTimescale = Math.Max(pValue, 0.01f);
                     break;
 
                 // These are vector properties but the engine lets you use a single float value to
@@ -371,8 +352,9 @@ namespace OpenSim.Region.Physics.BulletSPlugin
                     // m_bankingMix = 1;
                     // m_bankingTimescale = 1;
                     // m_referenceFrame = Quaternion.Identity;
-                    m_flags |= (VehicleFlag.NO_DEFLECTION_UP | VehicleFlag.LIMIT_ROLL_ONLY |
-                                VehicleFlag.LIMIT_MOTOR_UP);
+                    m_flags |= (VehicleFlag.NO_DEFLECTION_UP 
+                                | VehicleFlag.LIMIT_ROLL_ONLY
+                                | VehicleFlag.LIMIT_MOTOR_UP);
                     m_flags &= ~(VehicleFlag.HOVER_WATER_ONLY | VehicleFlag.HOVER_TERRAIN_ONLY | VehicleFlag.HOVER_GLOBAL_HEIGHT);
                     m_flags |= (VehicleFlag.HOVER_UP_ONLY);
                     break;
@@ -399,12 +381,13 @@ namespace OpenSim.Region.Physics.BulletSPlugin
                     // m_bankingMix = 0.8f;
                     // m_bankingTimescale = 1;
                     // m_referenceFrame = Quaternion.Identity;
-                    m_flags &= ~(VehicleFlag.HOVER_TERRAIN_ONLY |
-                            VehicleFlag.HOVER_GLOBAL_HEIGHT | VehicleFlag.HOVER_UP_ONLY);
-                    m_flags &= ~(VehicleFlag.LIMIT_ROLL_ONLY);
-                    m_flags |= (VehicleFlag.NO_DEFLECTION_UP |
-                                VehicleFlag.LIMIT_MOTOR_UP);
-                    m_flags |= (VehicleFlag.HOVER_WATER_ONLY);
+                    m_flags &= ~(VehicleFlag.HOVER_TERRAIN_ONLY
+                                    | VehicleFlag.HOVER_GLOBAL_HEIGHT 
+                                    | VehicleFlag.LIMIT_ROLL_ONLY
+                                    | VehicleFlag.HOVER_UP_ONLY);
+                    m_flags |= (VehicleFlag.NO_DEFLECTION_UP
+                                    | VehicleFlag.LIMIT_MOTOR_UP
+                                    | VehicleFlag.HOVER_WATER_ONLY);
                     break;
                 case Vehicle.TYPE_AIRPLANE:
                     m_linearFrictionTimescale = new Vector3(200, 10, 5);
@@ -429,9 +412,12 @@ namespace OpenSim.Region.Physics.BulletSPlugin
                     // m_bankingMix = 0.7f;
                     // m_bankingTimescale = 2;
                     // m_referenceFrame = Quaternion.Identity;
-                    m_flags &= ~(VehicleFlag.HOVER_WATER_ONLY | VehicleFlag.HOVER_TERRAIN_ONLY |
-                        VehicleFlag.HOVER_GLOBAL_HEIGHT | VehicleFlag.HOVER_UP_ONLY);
-                    m_flags &= ~(VehicleFlag.NO_DEFLECTION_UP | VehicleFlag.LIMIT_MOTOR_UP);
+                    m_flags &= ~(VehicleFlag.HOVER_WATER_ONLY
+                                    | VehicleFlag.HOVER_TERRAIN_ONLY
+                                    | VehicleFlag.HOVER_GLOBAL_HEIGHT
+                                    | VehicleFlag.HOVER_UP_ONLY
+                                    | VehicleFlag.NO_DEFLECTION_UP
+                                    | VehicleFlag.LIMIT_MOTOR_UP);
                     m_flags |= (VehicleFlag.LIMIT_ROLL_ONLY);
                     break;
                 case Vehicle.TYPE_BALLOON:
@@ -457,11 +443,13 @@ namespace OpenSim.Region.Physics.BulletSPlugin
                     // m_bankingMix = 0.7f;
                     // m_bankingTimescale = 5;
                     // m_referenceFrame = Quaternion.Identity;
-                    m_flags &= ~(VehicleFlag.HOVER_WATER_ONLY | VehicleFlag.HOVER_TERRAIN_ONLY |
-                        VehicleFlag.HOVER_UP_ONLY);
-                    m_flags &= ~(VehicleFlag.NO_DEFLECTION_UP | VehicleFlag.LIMIT_MOTOR_UP);
-                    m_flags |= (VehicleFlag.LIMIT_ROLL_ONLY);
-                    m_flags |= (VehicleFlag.HOVER_GLOBAL_HEIGHT);
+                    m_flags &= ~(VehicleFlag.HOVER_WATER_ONLY
+                                    | VehicleFlag.HOVER_TERRAIN_ONLY
+                                    | VehicleFlag.HOVER_UP_ONLY
+                                    | VehicleFlag.NO_DEFLECTION_UP
+                                    | VehicleFlag.LIMIT_MOTOR_UP);
+                    m_flags |= (VehicleFlag.LIMIT_ROLL_ONLY
+                                    | VehicleFlag.HOVER_GLOBAL_HEIGHT);
                     break;
             }
         }//end SetDefaultsForType
@@ -470,7 +458,8 @@ namespace OpenSim.Region.Physics.BulletSPlugin
         // Do any updating needed for a vehicle
         public void Refresh()
         {
-            if (Type == Vehicle.TYPE_NONE) return;
+            if (!IsActive) 
+                return;
 
             // Set the prim's inertia to zero. The vehicle code handles that and this
             //    removes the torque action introduced by Bullet.
@@ -489,7 +478,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin
             LimitRotation(pTimestep);
 
             // remember the position so next step we can limit absolute movement effects
-            m_lastPositionVector = Prim.Position;
+            m_lastPositionVector = Prim.ForcePosition;
 
             VDetailLog("{0},BSDynamics.Step,done,pos={1},force={2},velocity={3},angvel={4}",
                     Prim.LocalID, Prim.Position, Prim.Force, Prim.Velocity, Prim.RotationalVelocity);
@@ -543,7 +532,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin
             }
 
             // convert requested object velocity to object relative vector
-            Quaternion rotq = Prim.Orientation;
+            Quaternion rotq = Prim.ForceOrientation;
             m_newVelocity = m_lastLinearVelocityVector * rotq;
 
             // Add the various forces into m_dir which will be our new direction vector (velocity)
@@ -560,19 +549,19 @@ namespace OpenSim.Region.Physics.BulletSPlugin
             m_dir.Z = vel_now.Z;        // Preserve the accumulated falling velocity
              */
 
-            Vector3 pos = Prim.Position;
+            Vector3 pos = Prim.ForcePosition;
 //            Vector3 accel = new Vector3(-(m_dir.X - m_lastLinearVelocityVector.X / 0.1f), -(m_dir.Y - m_lastLinearVelocityVector.Y / 0.1f), m_dir.Z - m_lastLinearVelocityVector.Z / 0.1f);
 
             // If below the terrain, move us above the ground a little.
             float terrainHeight = Prim.PhysicsScene.TerrainManager.GetTerrainHeightAtXYZ(pos);
             // Taking the rotated size doesn't work here because m_prim.Size is the size of the root prim and not the linkset.
             //     Need to add a m_prim.LinkSet.Size similar to m_prim.LinkSet.Mass.
-            // Vector3 rotatedSize = m_prim.Size * m_prim.Orientation;
+            // Vector3 rotatedSize = m_prim.Size * m_prim.ForceOrientation;
             // if (rotatedSize.Z < terrainHeight)
             if (pos.Z < terrainHeight)
             {
                 pos.Z = terrainHeight + 2;
-                Prim.Position = pos;
+                Prim.ForcePosition = pos;
                 VDetailLog("{0},MoveLinear,terrainHeight,terrainHeight={1},pos={2}", Prim.LocalID, terrainHeight, pos);
             }
 
@@ -602,7 +591,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin
                 {
                     if ((pos.Z - m_VhoverTargetHeight) > .2 || (pos.Z - m_VhoverTargetHeight) < -.2)
                     {
-                        Prim.Position = pos;
+                        Prim.ForcePosition = pos;
                     }
                 }
                 else
@@ -654,12 +643,13 @@ namespace OpenSim.Region.Physics.BulletSPlugin
                 }
                 if (changed)
                 {
-                    Prim.Position = pos;
+                    Prim.ForcePosition = pos;
                     VDetailLog("{0},MoveLinear,blockingEndPoint,block={1},origPos={2},pos={3}",
                                 Prim.LocalID, m_BlockingEndPoint, posChange, pos);
                 }
             }
 
+            // Limit absolute vertical change
             float Zchange = Math.Abs(posChange.Z);
             if ((m_flags & (VehicleFlag.LIMIT_MOTOR_UP)) != 0)
             {
@@ -678,6 +668,8 @@ namespace OpenSim.Region.Physics.BulletSPlugin
                     grav.Z = (float)(grav.Z * 1.037125);
                 VDetailLog("{0},MoveLinear,limitMotorUp,grav={1}", Prim.LocalID, grav);
             }
+
+            // If not changing some axis, reduce out velocity
             if ((m_flags & (VehicleFlag.NO_X)) != 0)
                 m_newVelocity.X = 0;
             if ((m_flags & (VehicleFlag.NO_Y)) != 0)
@@ -720,19 +712,19 @@ namespace OpenSim.Region.Physics.BulletSPlugin
                 //    a newly set velocity, this routine steps the value from the previous
                 //    value (m_angularMotorVelocity) to the requested value (m_angularMotorDirection).
                 // There are m_angularMotorApply steps.
-                Vector3 origAngularVelocity = m_angularMotorVelocity;
+                Vector3 origVel = m_angularMotorVelocity;
+                Vector3 origDir = m_angularMotorDirection;
+
                 // ramp up to new value
-                //   current velocity    +=                         error                          /    (  time to get there   / step interval)
+                //       new velocity    +=                         error                          /    (  time to get there   / step interval)
                 //                               requested speed       -       last motor speed
                 m_angularMotorVelocity.X += (m_angularMotorDirection.X - m_angularMotorVelocity.X) /  (m_angularMotorTimescale / pTimestep);
                 m_angularMotorVelocity.Y += (m_angularMotorDirection.Y - m_angularMotorVelocity.Y) /  (m_angularMotorTimescale / pTimestep);
                 m_angularMotorVelocity.Z += (m_angularMotorDirection.Z - m_angularMotorVelocity.Z) /  (m_angularMotorTimescale / pTimestep);
 
-                VDetailLog("{0},MoveAngular,angularMotorApply,apply={1},angTScale={2},timeStep={3},origvel={4},dir={5},vel={6}",
-                        Prim.LocalID, m_angularMotorApply, m_angularMotorTimescale, pTimestep, origAngularVelocity, m_angularMotorDirection, m_angularMotorVelocity);
+                VDetailLog("{0},MoveAngular,angularMotorApply,apply={1},angTScale={2},timeStep={3},origvel={4},origDir={5},vel={6}",
+                        Prim.LocalID, m_angularMotorApply, m_angularMotorTimescale, pTimestep, origVel, origDir, m_angularMotorVelocity);
 
-                // This is done so that if script request rate is less than phys frame rate the expected
-                //    velocity may still be acheived.
                 m_angularMotorApply--;
             }
             else
@@ -746,25 +738,32 @@ namespace OpenSim.Region.Physics.BulletSPlugin
 
             // Vertical attractor section
             Vector3 vertattr = Vector3.Zero;
-            if (m_verticalAttractionTimescale < 300)
+            Vector3 deflection = Vector3.Zero;
+            Vector3 banking = Vector3.Zero;
+
+            if (m_verticalAttractionTimescale < 300 && m_lastAngularVelocity != Vector3.Zero)
             {
                 float VAservo = 0.2f / (m_verticalAttractionTimescale / pTimestep);
+                VAservo *= (m_verticalAttractionEfficiency * m_verticalAttractionEfficiency);
+
                 // get present body rotation
-                Quaternion rotq = Prim.Orientation;
-                // make a vector pointing up
+                Quaternion rotq = Prim.ForceOrientation;
+                // vector pointing up
                 Vector3 verterr = Vector3.Zero;
                 verterr.Z = 1.0f;
+
                 // rotate it to Body Angle
                 verterr = verterr * rotq;
-                // verterr.X and .Y are the World error ammounts. They are 0 when there is no error (Vehicle Body is 'vertical'), and .Z will be 1.
+                // verterr.X and .Y are the World error amounts. They are 0 when there is no error (Vehicle Body is 'vertical'), and .Z will be 1.
                 // As the body leans to its side |.X| will increase to 1 and .Z fall to 0. As body inverts |.X| will fall and .Z will go
                 // negative. Similar for tilt and |.Y|. .X and .Y must be modulated to prevent a stable inverted body.
+
+                // Error is 0 (no error) to +/- 2 (max error)
                 if (verterr.Z < 0.0f)
                 {
                     verterr.X = 2.0f - verterr.X;
                     verterr.Y = 2.0f - verterr.Y;
                 }
-                // Error is 0 (no error) to +/- 2 (max error)
                 // scale it by VAservo
                 verterr = verterr * VAservo;
 
@@ -784,7 +783,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin
 
             } // else vertical attractor is off
 
-            // m_lastVertAttractor = vertattr;
+            m_lastVertAttractor = vertattr;
 
             // Bank section tba
 
@@ -818,7 +817,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin
 
         internal void LimitRotation(float timestep)
         {
-            Quaternion rotq = Prim.Orientation;
+            Quaternion rotq = Prim.ForceOrientation;
             Quaternion m_rot = rotq;
             bool changed = false;
             if (m_RollreferenceFrame != Quaternion.Identity)
@@ -853,7 +852,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin
             }
             if (changed)
             {
-                Prim.Orientation = m_rot;
+                Prim.ForceOrientation = m_rot;
                 VDetailLog("{0},LimitRotation,done,orig={1},new={2}", Prim.LocalID, rotq, m_rot);
             }
 
diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSLinkset.cs b/OpenSim/Region/Physics/BulletSPlugin/BSLinkset.cs
index 4f225ae..3e82642 100755
--- a/OpenSim/Region/Physics/BulletSPlugin/BSLinkset.cs
+++ b/OpenSim/Region/Physics/BulletSPlugin/BSLinkset.cs
@@ -34,7 +34,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin
 {
 public class BSLinkset
 {
-    private static string LogHeader = "[BULLETSIM LINKSET]";
+    // private static string LogHeader = "[BULLETSIM LINKSET]";
 
     public BSPhysObject LinksetRoot { get; protected set; }
 
@@ -331,21 +331,21 @@ public class BSLinkset
             m_children.Add(child);
 
             BSPhysObject rootx = LinksetRoot; // capture the root and body as of now
-            BulletBody rootBodyx = LinksetRoot.BSBody;
             BSPhysObject childx = child;
-            BulletBody childBodyx = child.BSBody;
 
             DetailLog("{0},AddChildToLinkset,call,rID={1},rBody={2},cID={3},cBody={4}", 
                             rootx.LocalID,
-                            rootx.LocalID, rootBodyx.ptr.ToString("X"),
-                            childx.LocalID, childBodyx.ptr.ToString("X"));
+                            rootx.LocalID, rootx.BSBody.ptr.ToString("X"),
+                            childx.LocalID, childx.BSBody.ptr.ToString("X"));
 
             PhysicsScene.TaintedObject("AddChildToLinkset", delegate()
             {
                 DetailLog("{0},AddChildToLinkset,taint,child={1}", LinksetRoot.LocalID, child.LocalID);
                 // build the physical binding between me and the child
                 m_taintChildren.Add(childx);
-                PhysicallyLinkAChildToRoot(rootx, rootBodyx, childx, childBodyx);
+
+                // Since this is taint-time, the body and shape could have changed for the child
+                PhysicallyLinkAChildToRoot(rootx, rootx.BSBody, childx, childx.BSBody);
             });
         }
         return;
@@ -369,21 +369,19 @@ public class BSLinkset
         if (m_children.Remove(child))
         {
             BSPhysObject rootx = LinksetRoot; // capture the root and body as of now
-            BulletBody rootBodyx = LinksetRoot.BSBody;
             BSPhysObject childx = child;
-            BulletBody childBodyx = child.BSBody;
 
             DetailLog("{0},RemoveChildFromLinkset,call,rID={1},rBody={2},cID={3},cBody={4}", 
                             childx.LocalID,
-                            rootx.LocalID, rootBodyx.ptr.ToString("X"),
-                            childx.LocalID, childBodyx.ptr.ToString("X"));
+                            rootx.LocalID, rootx.BSBody.ptr.ToString("X"),
+                            childx.LocalID, childx.BSBody.ptr.ToString("X"));
 
             PhysicsScene.TaintedObject("RemoveChildFromLinkset", delegate()
             {
                 if (m_taintChildren.Contains(childx))
                     m_taintChildren.Remove(childx);
 
-                PhysicallyUnlinkAChildFromRoot(rootx, rootBodyx, childx, childBodyx);
+                PhysicallyUnlinkAChildFromRoot(rootx, rootx.BSBody, childx, childx.BSBody);
                 RecomputeLinksetConstraintVariables();
             });
 
diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSPhysObject.cs b/OpenSim/Region/Physics/BulletSPlugin/BSPhysObject.cs
index d9b738b..1ac8c59 100755
--- a/OpenSim/Region/Physics/BulletSPlugin/BSPhysObject.cs
+++ b/OpenSim/Region/Physics/BulletSPlugin/BSPhysObject.cs
@@ -81,6 +81,10 @@ public abstract class BSPhysObject : PhysicsActor
     // Tell the object to clean up.
     public abstract void Destroy();
 
+    public abstract OMV.Vector3 ForcePosition { get; set; }
+
+    public abstract OMV.Quaternion ForceOrientation { get; set; }
+
     #region Collisions
 
     // Requested number of milliseconds between collision events. Zero means disabled.
diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSPrim.cs b/OpenSim/Region/Physics/BulletSPlugin/BSPrim.cs
index a0e627e..f7b68ba 100644
--- a/OpenSim/Region/Physics/BulletSPlugin/BSPrim.cs
+++ b/OpenSim/Region/Physics/BulletSPlugin/BSPrim.cs
@@ -46,19 +46,13 @@ public sealed class BSPrim : BSPhysObject
     private static readonly ILog m_log = LogManager.GetLogger(MethodBase.GetCurrentMethod().DeclaringType);
     private static readonly string LogHeader = "[BULLETS PRIM]";
 
-    private IMesh _mesh;
     private PrimitiveBaseShape _pbs;
-    private ShapeData.PhysicsShapeType _shapeType;
-    private ulong _meshKey;
-    private ulong _hullKey;
-    private List<ConvexResult> _hulls;
 
     // _size is what the user passed. _scale is what we pass to the physics engine with the mesh.
     // Often _scale is unity because the meshmerizer will apply _size when creating the mesh.
     private OMV.Vector3 _size;  // the multiplier for each mesh dimension as passed by the user
     private OMV.Vector3 _scale; // the multiplier for each mesh dimension for the mesh as created by the meshmerizer
 
-    private bool _stopped;
     private bool _grabbed;
     private bool _isSelected;
     private bool _isVolumeDetect;
@@ -109,8 +103,6 @@ public sealed class BSPrim : BSPhysObject
         _buoyancy = 1f;
         _velocity = OMV.Vector3.Zero;
         _rotationalVelocity = OMV.Vector3.Zero;
-        _hullKey = 0;
-        _meshKey = 0;
         _pbs = pbs;
         _isPhysical = pisPhysical;
         _isVolumeDetect = false;
@@ -160,8 +152,9 @@ public sealed class BSPrim : BSPhysObject
         });
     }
 
+    // No one uses this property.
     public override bool Stopped {
-        get { return _stopped; }
+        get { return false; }
     }
     public override OMV.Vector3 Size {
         get { return _size; }
@@ -274,6 +267,7 @@ public sealed class BSPrim : BSPhysObject
         set {
             _position = value;
             // TODO: what does it mean to set the position of a child prim?? Rebuild the constraint?
+            PositionSanityCheck();
             PhysicsScene.TaintedObject("BSPrim.setPosition", delegate()
             {
                 // DetailLog("{0},BSPrim.SetPosition,taint,pos={1},orient={2}", LocalID, _position, _orientation);
@@ -281,6 +275,74 @@ public sealed class BSPrim : BSPhysObject
             });
         }
     }
+    public override OMV.Vector3 ForcePosition {
+        get {
+            _position = BulletSimAPI.GetPosition2(BSBody.ptr);
+            return _position;
+        }
+        set {
+            _position = value;
+            PositionSanityCheck();
+            BulletSimAPI.SetTranslation2(BSBody.ptr, _position, _orientation);
+        }
+    }
+
+    // Check that the current position is sane and, if not, modify the position to make it so.
+    // Check for being below terrain and being out of bounds.
+    // Returns 'true' of the position was made sane by some action.
+    private bool PositionSanityCheck()
+    {
+        bool ret = false;
+      
+        // If totally below the ground, move the prim up
+        // TODO: figure out the right solution for this... only for dynamic objects?
+        /*
+        float terrainHeight = PhysicsScene.TerrainManager.GetTerrainHeightAtXYZ(_position);
+        if (Position.Z < terrainHeight)
+        {
+            DetailLog("{0},BSPrim.PositionAdjustUnderGround,call,pos={1},terrain={2}", LocalID, _position, terrainHeight);
+            _position.Z = terrainHeight + 2.0f;
+            ret = true;
+        }
+         */
+        if ((CurrentCollisionFlags & CollisionFlags.BS_FLOATS_ON_WATER) != 0)
+        {
+            float waterHeight = PhysicsScene.GetWaterLevelAtXYZ(_position);
+            if (Position.Z < waterHeight)
+            {
+                _position.Z = waterHeight;
+                ret = true;
+            }
+        }
+
+        // TODO: check for out of bounds
+        return ret;
+    }
+
+    // A version of the sanity check that also makes sure a new position value is
+    //    pushed back to the physics engine. This routine would be used by anyone
+    //    who is not already pushing the value.
+    private bool PositionSanityCheck2(bool atTaintTime)
+    {
+        bool ret = false;
+        if (PositionSanityCheck())
+        {
+            // The new position value must be pushed into the physics engine but we can't
+            //    just assign to "Position" because of potential call loops.
+            BSScene.TaintCallback sanityOperation = delegate()
+            {
+                DetailLog("{0},BSPrim.PositionSanityCheck,taint,pos={1},orient={2}", LocalID, _position, _orientation);
+                BulletSimAPI.SetObjectTranslation(PhysicsScene.WorldID, LocalID, _position, _orientation);
+            };
+            if (atTaintTime)
+                sanityOperation();
+            else
+                PhysicsScene.TaintedObject("BSPrim.PositionSanityCheck", sanityOperation);
+
+            ret = true;
+        }
+        return ret;
+    }
 
     // Return the effective mass of the object.
     // If there are multiple items in the linkset, add them together for the root
@@ -326,14 +388,15 @@ public sealed class BSPrim : BSPhysObject
         }
         set {
             Vehicle type = (Vehicle)value;
-            BSPrim vehiclePrim = this;
+
+            // Tell the scene about the vehicle so it will get processing each frame.
+            PhysicsScene.VehicleInSceneTypeChanged(this, type);
+
             PhysicsScene.TaintedObject("setVehicleType", delegate()
             {
                 // Done at taint time so we're sure the physics engine is not using the variables
                 // Vehicle code changes the parameters for this vehicle type.
-                _vehicle.ProcessTypeChange(type);
-                // Tell the scene about the vehicle so it will get processing each frame.
-                PhysicsScene.VehicleInSceneTypeChanged(this, type);
+                this._vehicle.ProcessTypeChange(type);
             });
         }
     }
@@ -371,7 +434,9 @@ public sealed class BSPrim : BSPhysObject
     public override void StepVehicle(float timeStep)
     {
         if (IsPhysical)
+        {
             _vehicle.Step(timeStep);
+        }
     }
 
     // Allows the detection of collisions with inherently non-physical prims. see llVolumeDetect for more
@@ -435,6 +500,20 @@ public sealed class BSPrim : BSPhysObject
             });
         }
     }
+    // Go directly to Bullet to get/set the value. 
+    public override OMV.Quaternion ForceOrientation
+    {
+        get
+        {
+            _orientation = BulletSimAPI.GetOrientation2(BSBody.ptr);
+            return _orientation;
+        }
+        set
+        {
+            _orientation = value;
+            BulletSimAPI.SetTranslation2(BSBody.ptr, _position, _orientation);
+        }
+    }
     public override int PhysicsActorType {
         get { return _physicsActorType; }
         set { _physicsActorType = value; }
@@ -488,11 +567,10 @@ public sealed class BSPrim : BSPhysObject
         // This is a NOOP if the object is not in the world (BulletSim and Bullet ignore objects not found).
         BulletSimAPI.RemoveObjectFromWorld2(PhysicsScene.World.ptr, BSBody.ptr);
 
-
         // Set up the object physicalness (does gravity and collisions move this object)
         MakeDynamic(IsStatic);
 
-        // Do any vehicle stuff
+        // Update vehicle specific parameters
         _vehicle.Refresh();
 
         // Arrange for collision events if the simulator wants them
@@ -563,7 +641,6 @@ public sealed class BSPrim : BSPhysObject
             // A dynamic object has mass
             IntPtr collisionShapePtr = BulletSimAPI.GetCollisionShape2(BSBody.ptr);
             OMV.Vector3 inertia = BulletSimAPI.CalculateLocalInertia2(collisionShapePtr, Mass);
-            // OMV.Vector3 inertia = OMV.Vector3.Zero;
             BulletSimAPI.SetMassProps2(BSBody.ptr, _mass, inertia);
             BulletSimAPI.UpdateInertiaTensor2(BSBody.ptr);
 
@@ -573,7 +650,7 @@ public sealed class BSPrim : BSPhysObject
             BulletSimAPI.SetSleepingThresholds2(BSBody.ptr, PhysicsScene.Params.linearSleepingThreshold, PhysicsScene.Params.angularSleepingThreshold);
             BulletSimAPI.SetContactProcessingThreshold2(BSBody.ptr, PhysicsScene.Params.contactProcessingThreshold);
 
-            // There can be special things needed for implementing linksets.
+            // There might be special things needed for implementing linksets.
             Linkset.MakeDynamic(this);
 
             // Force activation of the object so Bullet will act on it.
@@ -663,7 +740,16 @@ public sealed class BSPrim : BSPhysObject
         }
     }
     public override bool FloatOnWater {
-        set { _floatOnWater = value; }
+        set { 
+            _floatOnWater = value;
+            PhysicsScene.TaintedObject("BSPrim.setFloatOnWater", delegate()
+            {
+                if (_floatOnWater)
+                    CurrentCollisionFlags = BulletSimAPI.AddToCollisionFlags2(BSBody.ptr, CollisionFlags.BS_FLOATS_ON_WATER);
+                else
+                    CurrentCollisionFlags = BulletSimAPI.RemoveFromCollisionFlags2(BSBody.ptr, CollisionFlags.BS_FLOATS_ON_WATER);
+            });
+        }
     }
     public override OMV.Vector3 RotationalVelocity {
         get {
@@ -1082,15 +1168,15 @@ public sealed class BSPrim : BSPhysObject
     public void FillShapeInfo(out ShapeData shape)
     {
         shape.ID = LocalID;
-        shape.Type = _shapeType;
+        shape.Type = ShapeData.PhysicsShapeType.SHAPE_UNKNOWN;
         shape.Position = _position;
         shape.Rotation = _orientation;
         shape.Velocity = _velocity;
         shape.Scale = _scale;
         shape.Mass = _isPhysical ? _mass : 0f;
         shape.Buoyancy = _buoyancy;
-        shape.HullKey = _hullKey;
-        shape.MeshKey = _meshKey;
+        shape.HullKey = 0;
+        shape.MeshKey = 0;
         shape.Friction = _friction;
         shape.Restitution = _restitution;
         shape.Collidable = (!IsPhantom) ? ShapeData.numericTrue : ShapeData.numericFalse;
@@ -1112,7 +1198,8 @@ public sealed class BSPrim : BSPhysObject
 
         // Create the correct physical representation for this type of object.
         // Updates BSBody and BSShape with the new information.
-        PhysicsScene.Shapes.GetBodyAndShape(forceRebuild, PhysicsScene.World, this, shapeData, _pbs, 
+        // Ignore 'forceRebuild'. This routine makes the right choices and changes of necessary.
+        PhysicsScene.Shapes.GetBodyAndShape(false, PhysicsScene.World, this, shapeData, _pbs, 
                         null, delegate(BulletBody dBody)
         {
             // Called if the current prim body is about to be destroyed.
@@ -1205,6 +1292,8 @@ public sealed class BSPrim : BSPhysObject
             _acceleration = entprop.Acceleration;
             _rotationalVelocity = entprop.RotationalVelocity;
 
+            PositionSanityCheck2(true);
+
             DetailLog("{0},BSPrim.UpdateProperties,call,pos={1},orient={2},vel={3},accel={4},rotVel={5}",
                     LocalID, _position, _orientation, _velocity, _acceleration, _rotationalVelocity);
 
diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSScene.cs b/OpenSim/Region/Physics/BulletSPlugin/BSScene.cs
index 0cf8c91..aaed7de 100644
--- a/OpenSim/Region/Physics/BulletSPlugin/BSScene.cs
+++ b/OpenSim/Region/Physics/BulletSPlugin/BSScene.cs
@@ -493,6 +493,10 @@ public class BSScene : PhysicsScene, IPhysicsParameters
         // step the physical world one interval
         m_simulationStep++;
         int numSubSteps = 0;
+
+        // Sometimes needed for debugging to find out what happened before the step
+        // PhysicsLogging.Flush();
+
         try
         {
             if (PhysicsLogging.Enabled) beforeTime = Util.EnvironmentTickCount();
@@ -536,7 +540,7 @@ public class BSScene : PhysicsScene, IPhysicsParameters
         }
 
         // This is a kludge to get avatar movement updates.
-        //   ODE sends collisions for avatars even if there are have been no collisions. This updates
+        //   the simulator expects collisions for avatars even if there are have been no collisions. This updates
         //   avatar animations and stuff.
         // If you fix avatar animation updates, remove this overhead and let normal collision processing happen.
         foreach (BSPhysObject bsp in m_avatars)
@@ -556,7 +560,7 @@ public class BSScene : PhysicsScene, IPhysicsParameters
         }
 
         // Objects that are done colliding are removed from the ObjectsWithCollisions list.
-        // This can't be done by SendCollisions because it is inside an iteration of ObjectWithCollisions.
+        // Not done above because it is inside an iteration of ObjectWithCollisions.
         if (ObjectsWithNoMoreCollisions.Count > 0)
         {
             foreach (BSPhysObject po in ObjectsWithNoMoreCollisions)
@@ -726,13 +730,10 @@ public class BSScene : PhysicsScene, IPhysicsParameters
 
     public void VehicleInSceneTypeChanged(BSPrim vehic, Vehicle newType)
     {
-        if (newType == Vehicle.TYPE_NONE)
-        {
-            RemoveVehiclePrim(vehic);
-        }
-        else
+        RemoveVehiclePrim(vehic);
+        if (newType != Vehicle.TYPE_NONE)
         {
-            // make it so the scene will call us each tick to do vehicle things
+           // make it so the scene will call us each tick to do vehicle things
            AddVehiclePrim(vehic);
         }
     }
@@ -764,7 +765,7 @@ public class BSScene : PhysicsScene, IPhysicsParameters
     }
 
     // Some prims have extra vehicle actions
-    // no locking because only called when physics engine is not busy
+    // Called at taint time!
     private void ProcessVehicles(float timeStep)
     {
         foreach (BSPhysObject pobj in m_vehicles)
@@ -1008,12 +1009,12 @@ public class BSScene : PhysicsScene, IPhysicsParameters
 
 
             new ParameterDefn("MaxPersistantManifoldPoolSize", "Number of manifolds pooled (0 means default of 4096)",
-            0f,     // zero to disable
+            0f,
             (s,cf,p,v) => { s.m_params[0].maxPersistantManifoldPoolSize = cf.GetFloat(p, v); },
             (s) => { return s.m_params[0].maxPersistantManifoldPoolSize; },
             (s,p,l,v) => { s.m_params[0].maxPersistantManifoldPoolSize = v; } ),
             new ParameterDefn("MaxCollisionAlgorithmPoolSize", "Number of collisions pooled (0 means default of 4096)",
-            0f,     // zero to disable
+            0f,
             (s,cf,p,v) => { s.m_params[0].maxCollisionAlgorithmPoolSize = cf.GetFloat(p, v); },
             (s) => { return s.m_params[0].maxCollisionAlgorithmPoolSize; },
             (s,p,l,v) => { s.m_params[0].maxCollisionAlgorithmPoolSize = v; } ),
@@ -1028,7 +1029,7 @@ public class BSScene : PhysicsScene, IPhysicsParameters
             (s) => { return s.m_params[0].shouldForceUpdateAllAabbs; },
             (s,p,l,v) => { s.m_params[0].shouldForceUpdateAllAabbs = v; } ),
             new ParameterDefn("ShouldRandomizeSolverOrder", "Enable for slightly better stacking interaction",
-            ConfigurationParameters.numericFalse,
+            ConfigurationParameters.numericTrue,
             (s,cf,p,v) => { s.m_params[0].shouldRandomizeSolverOrder = s.NumericBool(cf.GetBoolean(p, s.BoolNumeric(v))); },
             (s) => { return s.m_params[0].shouldRandomizeSolverOrder; },
             (s,p,l,v) => { s.m_params[0].shouldRandomizeSolverOrder = v; } ),
@@ -1152,7 +1153,6 @@ public class BSScene : PhysicsScene, IPhysicsParameters
     {
         if (SettableParameters.Length < ParameterDefinitions.Length)
         {
-
             List<PhysParameterEntry> entries = new List<PhysParameterEntry>();
             for (int ii = 0; ii < ParameterDefinitions.Length; ii++)
             {
diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSShapeCollection.cs b/OpenSim/Region/Physics/BulletSPlugin/BSShapeCollection.cs
index dee6243..399a133 100755
--- a/OpenSim/Region/Physics/BulletSPlugin/BSShapeCollection.cs
+++ b/OpenSim/Region/Physics/BulletSPlugin/BSShapeCollection.cs
@@ -36,7 +36,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin
 {
 public class BSShapeCollection : IDisposable
 {
-    private static string LogHeader = "[BULLETSIM SHAPE COLLECTION]";
+    // private static string LogHeader = "[BULLETSIM SHAPE COLLECTION]";
 
     protected BSScene PhysicsScene { get; set; }
 
@@ -108,7 +108,8 @@ public class BSShapeCollection : IDisposable
             // If we had to select a new shape geometry for the object,
             //    rebuild the body around it.
             // Updates prim.BSBody with information/pointers to requested body
-            bool newBody = CreateBody((newGeom || forceRebuild), prim, PhysicsScene.World, prim.BSShape, shapeData, bodyCallback);
+            bool newBody = CreateBody((newGeom || forceRebuild), prim, PhysicsScene.World, 
+                                    prim.BSShape, shapeData, bodyCallback);
             ret = newGeom || newBody;
         }
         DetailLog("{0},BSShapeCollection.GetBodyAndShape,force={1},ret={2},body={3},shape={4}",
@@ -140,7 +141,7 @@ public class BSShapeCollection : IDisposable
             bodyDesc.lastReferenced = System.DateTime.Now;
             Bodies[body.ID] = bodyDesc;
         }
-}
+    }
 
     // Release the usage of a body.
     // Called when releasing use of a BSBody. BSShape is handled separately.
@@ -167,7 +168,7 @@ public class BSShapeCollection : IDisposable
                     {
                         DetailLog("{0},BSShapeCollection.DereferenceBody,DestroyingBody. ptr={1}",
                                                     body.ID, body.ptr.ToString("X"));
-                        // If the caller needs to know, pass the event up.
+                        // If the caller needs to know the old body is going away, pass the event up.
                         if (bodyCallback != null) bodyCallback(body);
 
                         // Zero any reference to the shape so it is not freed when the body is deleted.
@@ -448,7 +449,8 @@ public class BSShapeCollection : IDisposable
         ulong newMeshKey = ComputeShapeKey(shapeData, pbs, out lod);
 
         // if this new shape is the same as last time, don't recreate the mesh
-        if (prim.BSShape.shapeKey == newMeshKey) return false;
+        if (newMeshKey == prim.BSShape.shapeKey && prim.BSShape.type == ShapeData.PhysicsShapeType.SHAPE_MESH)
+            return false;
 
         DetailLog("{0},BSShapeCollection.CreateGeomMesh,create,oldKey={1},newKey={2}",
                                 prim.LocalID, prim.BSShape.shapeKey.ToString("X"), newMeshKey.ToString("X"));
diff --git a/OpenSim/Region/Physics/BulletSPlugin/BulletSimAPI.cs b/OpenSim/Region/Physics/BulletSPlugin/BulletSimAPI.cs
index 1125d7e..a43880d 100644
--- a/OpenSim/Region/Physics/BulletSPlugin/BulletSimAPI.cs
+++ b/OpenSim/Region/Physics/BulletSPlugin/BulletSimAPI.cs
@@ -71,7 +71,7 @@ public struct BulletBody
         buff.Append(ID.ToString());
         buff.Append(",p=");
         buff.Append(ptr.ToString("X"));
-        if (collisionFilter != 0 && collisionMask != 0)
+        if (collisionFilter != 0 || collisionMask != 0)
         {
             buff.Append(",f=");
             buff.Append(collisionFilter.ToString("X"));
@@ -344,10 +344,7 @@ public enum CollisionFlags : uint
     CF_DISABLE_SPU_COLLISION_PROCESS = 1 << 6,
     // Following used by BulletSim to control collisions
     BS_SUBSCRIBE_COLLISION_EVENTS    = 1 << 10,
-    // BS_VOLUME_DETECT_OBJECT          = 1 << 11,
-    // BS_PHANTOM_OBJECT                = 1 << 12,
-    // BS_PHYSICAL_OBJECT               = 1 << 13,
-    // BS_TERRAIN_OBJECT                = 1 << 14,
+    BS_FLOATS_ON_WATER               = 1 << 11,
     BS_NONE                          = 0,
     BS_ALL                           = 0xFFFFFFFF,
 
@@ -356,9 +353,6 @@ public enum CollisionFlags : uint
     BS_ACTIVE = CF_STATIC_OBJECT
                 | CF_KINEMATIC_OBJECT
                 | CF_NO_CONTACT_RESPONSE
-    //            | BS_VOLUME_DETECT_OBJECT
-    //            | BS_PHANTOM_OBJECT
-    //            | BS_PHYSICAL_OBJECT,
 };
 
 // Values for collisions groups and masks
diff --git a/OpenSim/Region/ScriptEngine/Shared/Api/Implementation/OSSL_Api.cs b/OpenSim/Region/ScriptEngine/Shared/Api/Implementation/OSSL_Api.cs
index 8ad1451..2c682d4 100644
--- a/OpenSim/Region/ScriptEngine/Shared/Api/Implementation/OSSL_Api.cs
+++ b/OpenSim/Region/ScriptEngine/Shared/Api/Implementation/OSSL_Api.cs
@@ -3593,7 +3593,7 @@ namespace OpenSim.Region.ScriptEngine.Shared.Api
 
             return new LSL_Key(m_host.ParentGroup.FromPartID.ToString());
         }
- 
+
         /// <summary>
         /// Sets the response type for an HTTP request/response
         /// </summary>
@@ -3604,5 +3604,92 @@ namespace OpenSim.Region.ScriptEngine.Shared.Api
             if (m_UrlModule != null)
                 m_UrlModule.HttpContentType(new UUID(id),type);
         }
+
+        /// Shout an error if the object owner did not grant the script the specified permissions.
+        /// </summary>
+        /// <param name="perms"></param>
+        /// <returns>boolean indicating whether an error was shouted.</returns>
+        protected bool ShoutErrorOnLackingOwnerPerms(int perms, string errorPrefix)
+        {
+            CheckThreatLevel(ThreatLevel.Moderate, "osDropAttachment");
+            m_host.AddScriptLPS(1);
+            bool fail = false;
+            if (m_item.PermsGranter != m_host.OwnerID)
+            {
+                fail = true;
+                OSSLShoutError(string.Format("{0}. Permissions not granted to owner.", errorPrefix));
+            }
+            else if ((m_item.PermsMask & perms) == 0)
+            {
+                fail = true;
+                OSSLShoutError(string.Format("{0}. Permissions not granted.", errorPrefix));
+            }
+
+            return fail;
+        }
+
+        protected void DropAttachment(bool checkPerms)
+        {
+            if (checkPerms && ShoutErrorOnLackingOwnerPerms(ScriptBaseClass.PERMISSION_ATTACH, "Cannot drop attachment"))
+            {
+                return;
+            }
+
+            IAttachmentsModule attachmentsModule = m_ScriptEngine.World.AttachmentsModule;
+            ScenePresence sp = attachmentsModule == null ? null : m_host.ParentGroup.Scene.GetScenePresence(m_host.ParentGroup.OwnerID);
+
+            if (attachmentsModule != null && sp != null)
+            {
+                attachmentsModule.DetachSingleAttachmentToGround(sp, m_host.ParentGroup.LocalId);
+            }
+        }
+
+        protected void DropAttachmentAt(bool checkPerms, LSL_Vector pos, LSL_Rotation rot)
+        {
+            if (checkPerms && ShoutErrorOnLackingOwnerPerms(ScriptBaseClass.PERMISSION_ATTACH, "Cannot drop attachment"))
+            {
+                return;
+            }
+
+            IAttachmentsModule attachmentsModule = m_ScriptEngine.World.AttachmentsModule;
+            ScenePresence sp = attachmentsModule == null ? null : m_host.ParentGroup.Scene.GetScenePresence(m_host.ParentGroup.OwnerID);
+
+            if (attachmentsModule != null && sp != null)
+            {
+                attachmentsModule.DetachSingleAttachmentToGround(sp, m_host.ParentGroup.LocalId, pos, rot);
+            }
+        }
+
+        public void osDropAttachment()
+        {
+            CheckThreatLevel(ThreatLevel.Moderate, "osDropAttachment");
+            m_host.AddScriptLPS(1);
+
+            DropAttachment(true);
+        }
+
+        public void osForceDropAttachment()
+        {
+            CheckThreatLevel(ThreatLevel.High, "osForceDropAttachment");
+            m_host.AddScriptLPS(1);
+
+            DropAttachment(false);
+        }
+
+        public void osDropAttachmentAt(LSL_Vector pos, LSL_Rotation rot)
+        {
+            CheckThreatLevel(ThreatLevel.Moderate, "osDropAttachmentAt");
+            m_host.AddScriptLPS(1);
+
+            DropAttachmentAt(true, pos, rot);
+        }
+
+        public void osForceDropAttachmentAt(LSL_Vector pos, LSL_Rotation rot)
+        {
+            CheckThreatLevel(ThreatLevel.High, "osForceDropAttachmentAt");
+            m_host.AddScriptLPS(1);
+
+            DropAttachmentAt(false, pos, rot);
+        }
     }
 }
diff --git a/OpenSim/Region/ScriptEngine/Shared/Api/Interface/IOSSL_Api.cs b/OpenSim/Region/ScriptEngine/Shared/Api/Interface/IOSSL_Api.cs
index 0ea363a..b1fbed5 100644
--- a/OpenSim/Region/ScriptEngine/Shared/Api/Interface/IOSSL_Api.cs
+++ b/OpenSim/Region/ScriptEngine/Shared/Api/Interface/IOSSL_Api.cs
@@ -394,5 +394,29 @@ namespace OpenSim.Region.ScriptEngine.Shared.Api.Interfaces
         /// </summary>
         /// <returns></returns>
         void osSetContentType(LSL_Key id, string type);
+
+        /// <summary>
+        /// Attempts to drop an attachment to the ground
+        /// </summary>
+        void osDropAttachment();
+
+        /// <summary>
+        /// Attempts to drop an attachment to the ground while bypassing the script permissions
+        /// </summary>
+        void osForceDropAttachment();
+
+        /// <summary>
+        /// Attempts to drop an attachment at the specified coordinates.
+        /// </summary>
+        /// <param name="pos"></param>
+        /// <param name="rot"></param>
+        void osDropAttachmentAt(vector pos, rotation rot);
+
+        /// <summary>
+        /// Attempts to drop an attachment at the specified coordinates while bypassing the script permissions
+        /// </summary>
+        /// <param name="pos"></param>
+        /// <param name="rot"></param>
+        void osForceDropAttachmentAt(vector pos, rotation rot);
     }
 }
diff --git a/OpenSim/Region/ScriptEngine/Shared/Api/Runtime/OSSL_Stub.cs b/OpenSim/Region/ScriptEngine/Shared/Api/Runtime/OSSL_Stub.cs
index 52ca3da..dee1b28 100644
--- a/OpenSim/Region/ScriptEngine/Shared/Api/Runtime/OSSL_Stub.cs
+++ b/OpenSim/Region/ScriptEngine/Shared/Api/Runtime/OSSL_Stub.cs
@@ -972,5 +972,25 @@ namespace OpenSim.Region.ScriptEngine.Shared.ScriptBase
         {
             m_OSSL_Functions.osSetContentType(id,type);
         }
+
+        public void osDropAttachment()
+        {
+            m_OSSL_Functions.osDropAttachment();
+        }
+
+        public void osForceDropAttachment()
+        {
+            m_OSSL_Functions.osForceDropAttachment();
+        }
+
+        public void osDropAttachmentAt(vector pos, rotation rot)
+        {
+            m_OSSL_Functions.osDropAttachmentAt(pos, rot);
+        }
+
+        public void osForceDropAttachmentAt(vector pos, rotation rot)
+        {
+            m_OSSL_Functions.osForceDropAttachmentAt(pos, rot);
+        }
     }
 }
diff --git a/OpenSim/Region/ScriptEngine/XEngine/EventManager.cs b/OpenSim/Region/ScriptEngine/XEngine/EventManager.cs
index cee10df..9405075 100644
--- a/OpenSim/Region/ScriptEngine/XEngine/EventManager.cs
+++ b/OpenSim/Region/ScriptEngine/XEngine/EventManager.cs
@@ -96,9 +96,12 @@ namespace OpenSim.Region.ScriptEngine.XEngine
             if (part == null)
                 return;
 
+            if ((part.ScriptEvents & scriptEvents.money) == 0)
+                part = part.ParentGroup.RootPart;
+
             m_log.Debug("Paid: " + objectID + " from " + agentID + ", amount " + amount);
 
-            part = part.ParentGroup.RootPart;
+//            part = part.ParentGroup.RootPart;
             money(part.LocalId, agentID, amount);
         }
 
diff --git a/OpenSim/Services/LLLoginService/LLLoginService.cs b/OpenSim/Services/LLLoginService/LLLoginService.cs
index 988a9b9..cbb6e6c 100644
--- a/OpenSim/Services/LLLoginService/LLLoginService.cs
+++ b/OpenSim/Services/LLLoginService/LLLoginService.cs
@@ -300,7 +300,7 @@ namespace OpenSim.Services.LLLoginService
                 {
                     m_log.InfoFormat(
                         "[LLOGIN SERVICE]: Login failed for {0} {1}, reason: user level is {2} but minimum login level is {3}",
-                        firstName, lastName, m_MinLoginLevel, account.UserLevel);
+                        firstName, lastName, account.UserLevel, m_MinLoginLevel);
                     return LLFailedLoginResponse.LoginBlockedProblem;
                 }