20 files changed, 256 insertions, 253 deletions

diff --git a/INSTALL.md b/INSTALL.md
index b501b92..fdbc8e0 100644
--- a/INSTALL.md
+++ b/INSTALL.md
@@ -8,7 +8,9 @@ from Linux.
 
 It's only been tested on Ubuntu 10.04, 11.04, 12.04, 16.04, as well as
 Debian 8, and Devuan 9, YMMV.  This is also a WIP, use it at your own
-risk.  It's been used to set up a few freshly installed servers though.
+risk.  It's been used to set up a few freshly installed servers though. 
+It should work on recent Debian based Linux distros.
+
 
 The directory layout.
 ---------------------
@@ -76,12 +78,7 @@ following script, from inside the OpenSim directory -
 
 ./InstallItAll.sh DatabasePassword
 
-This will do most of the work for you, except for creating sims.  There
-is a final step that needs to be done manually for now.  Edit
-/etc/rc.local, make sure it has the following line in it somewhere,
-probably at the end -
-
-/opt/opensim/current/scripts/fix_var_run.sh
+This will do most of the work for you, except for creating sims.
 
 
 Creating sims.
diff --git a/InstallItAll.sh b/InstallItAll.sh
index 0568709..6467ff8 100755
--- a/InstallItAll.sh
+++ b/InstallItAll.sh
@@ -1,42 +1,26 @@
 #!/bin/bash
 
-OSPATH="/opt/opensim"
 MYSQL_HOST="localhost"
-MYSQL_DB="InfiniteGrid"
-MYSQL_USER="opensim"
-OS_USER="opensim"
-
-OSVER="0.9.0.1"
-
-
-# Figure out where we are, most of this mess is to troll through soft links.
-PRG="$0"
-while [ -h "${PRG}" ] ; do
-  ls=$(ls -ld "${PRG}")
-  link=`expr "${ls}" : '.*-> \(.*\)$'`
-  if expr "${link}" : '.*/.*' > /dev/null; then
-    PRG="${link}"
-  else
-    PRG=$(dirname "${PRG}")/"${link}"
-  fi
-done
-PRGDIR=$(dirname "${PRG}")
-pushd ${PRGDIR} >/dev/null
-PRGDIR=$(pwd)
-popd >/dev/null
+MYSQL_DB="opensim_SC"
+MYSQL_USER="opensim_SC"
+
+OS_VER="0.9.0.1"
+
+source scripts/common.sh
+getPrgDir
 
 # This should all be safe for pre existing installs that are being updated.
 
 MYSQL_PASSWORD=$1
 # Try to get old database credentials if they exist.
-if [ -f ${OSPATH}/config/config.ini ]; then
+if [ -f ${OS_PATH}/config/config.ini ]; then
     # Get the database credentials.
     declare -A creds
     while read -d ';' p; do
         k=$(echo ${p} | cut -d '=' -f 1)
         v=$(echo ${p} | cut -d '=' -f 2)
         creds[${k}]="${v}"
-    done < <(sudo grep ConnectionString ${OSPATH}/config/config.ini | cut -d '"' -f 2)
+    done < <(sudo grep ConnectionString ${OS_PATH}/config/config.ini | cut -d '"' -f 2)
     # The above seems the best way to get bash to let the creds assignments survive outside the loop.
 
     MYSQL_HOST="${creds[Data Source]}"
@@ -50,76 +34,89 @@ fi
 
 USER=$(whoami)
 
-echo "Installing software."
-sudo apt-get install mysql-server tmux mono-complete mono-gmcs nunit uuid-runtime monit mc
+echo "Installing into ${OS_PATH}, as user ${OS_USER} ."
+echo "Using MySQL host:${MYSQL_HOST} database:${MYSQL_DB} user:${MYSQL_USER} password:${MYSQL_PASSWORD} ."
+
+
+echo "Installing and compiling software."
+sudo apt-get install mariadb-server tmux mono-complete mono-devel nunit uuid-runtime monit
 # nant is done separately, coz it was removed from Debian for some mysterious reason.
 sudo apt-get install nant
 sudo /etc/init.d/mysql restart
 
-echo "Setting up OpenSim users."
+
+echo "Setting up OpenSim users.  This next prompt asks for your MySQL root users password."
 # "create user if not exists" doesn't exist until MySQL 5.7, so we have to put up with a warning, which we can ignore.
 mysql -u root -p -h localhost << zzzzEOFzzz
 create database if not exists $MYSQL_DB;
-create user $OS_USER identified by '$MYSQL_PASSWORD';
-create user $OS_USER@localhost identified by '$MYSQL_PASSWORD';
-grant all on $MYSQL_DB.* to $OS_USER;
-grant all on $MYSQL_DB.* to $OS_USER@localhost;
+create user '$OS_USER' identified by '$MYSQL_PASSWORD';
+create user '$OS_USER'@localhost identified by '$MYSQL_PASSWORD';
+grant all on $MYSQL_DB.* to '$OS_USER';
+grant all on $MYSQL_DB.* to '$OS_USER'@localhost;
 FLUSH PRIVILEGES;
 zzzzEOFzzz
 
-echo "Setting up OpenSim."
-sudo adduser --system --shell /bin/false --group $OS_USER
-sudo addgroup $USER $OS_USER
+sudo adduser --system --shell /bin/false --group ${OS_USER}
+sudo addgroup ${USER} ${OS_USER}
 
-echo "Building OpenSim."
-./BuildIt.sh
 
 echo "Setting up OpenSim."
-sudo rm -fr   $OSPATH/opensim-IG_*
-sudo mkdir -p $OSPATH/opensim-IG_$OSVER
-sudo cp -fr $PRGDIR/* $OSPATH/opensim-IG_$OSVER
-
-cd $OSPATH
-sudo ln -fs opensim-IG_$OSVER current
+sudo rm -fr   ${OS_PATH}/opensim-SC_*
+sudo mkdir -p ${OS_PATH}/opensim-SC_${OS_VER}
+sudo cp -fr $PRGDIR/* ${OS_PATH}/opensim-SC_${OS_VER}
+cd ${OS_PATH}
+if [ ! -h current ]; then
+    sudo ln -fs opensim-SC_${OS_VER} current
+fi
 
 cd current
-
 for dir in AssetFiles backups caches config db logs
 do
-    if [ ! -f ../$dir ]; then
+    if [ ! -d ../$dir ]; then
         sudo cp -fr example/$dir ..
     fi
 done
 
-pushd config/ROBUST >/dev/null
+pushd ../config/ROBUST >/dev/null
 sudo ln -fs ../../current/scripts/common.sh common.sh
 sudo ln -fs ../../current/scripts/start-sim start-sim
 sudo ln -fs ../../current/scripts/start-sim stop-sim
+sudo sed -i "s@OS_PATH@${OS_PATH}@g" opensim-monit.conf
 popd >/dev/null
 
-echo "Securing OpenSim."
-sudo chown -R $OS_USER:$OS_USER $OSPATH
-sudo chmod -R 775 $OSPATH
-sudo chmod -R a-x $OSPATH
-sudo chmod -R a+X $OSPATH
-sudo chmod -R g+w $OSPATH
-sudo chmod -R a+x $OSPATH/current/scripts/*.sh
-sudo chmod a+x $OSPATH/current/scripts/show-console
-sudo chmod a+x $OSPATH/current/scripts/start-sim
-
-sudo chmod ug+rwx  $OSPATH/config
-sudo chmod g+s     $OSPATH/config
-sudo chmod 600 $OSPATH/config/config.ini
-
-sudo sed -i "s@MYSQL_HOST@${MYSQL_HOST}@g" config/config.ini
-sudo sed -i "s@MYSQL_DB@${MYSQL_DB}@g" config/config.ini
-sudo sed -i "s@MYSQL_USER@${MYSQL_USER}@g" config/config.ini
-sudo chmod 600 config/config.ini
-sudo sed -i "s@MYSQL_PASSWORD@${MYSQL_PASSWORD}@g" config/config.ini
-sudo chmod 600 config/config.ini
-
-sudo cp scripts/opensim.tmux.conf /home/$OS_USER/.tmux.conf
-sudo chown $USER /home/$OS_USER/.tmux.conf
-sudo chmod 644 /home/$OS_USER/.tmux.conf
+sudo cp bin/config-include/config_* ../config/
+sudo ln -fs  config_localhost.ini ../config/config.ini
+sudo sed -i "s@MYSQL_HOST@${MYSQL_HOST}@g" ../config/config_IG.ini
+sudo sed -i "s@MYSQL_DB@${MYSQL_DB}@g" ../config/config_IG.ini
+sudo sed -i "s@MYSQL_USER@${MYSQL_USER}@g" ../config/config_IG.ini
+
+sudo sed -i "s@MYSQL_HOST@${MYSQL_HOST}@g" ../config/config_MG.ini
+sudo sed -i "s@MYSQL_DB@${MYSQL_DB}@g" ../config/config_MG.ini
+sudo sed -i "s@MYSQL_USER@${MYSQL_USER}@g" ../config/config_MG.ini
+
+sudo sed -i "s@MYSQL_HOST@${MYSQL_HOST}@g" ../config/config_localhost.ini
+sudo sed -i "s@MYSQL_DB@${MYSQL_DB}@g" ../config/config_localhost.ini
+sudo sed -i "s@MYSQL_USER@${MYSQL_USER}@g" ../config/config_localhost.ini
+
+sudo chmod 600 ../config/*.ini
+sudo sed -i "s@MYSQL_PASSWORD@${MYSQL_PASSWORD}@g" ../config/config_IG.ini
+sudo sed -i "s@MYSQL_PASSWORD@${MYSQL_PASSWORD}@g" ../config/config_MG.ini
+sudo sed -i "s@MYSQL_PASSWORD@${MYSQL_PASSWORD}@g" ../config/config_localhost.ini
+sudo chmod 600 ../config/*.ini
+
+if [ ! -f /home/${OS_USER}/.tmux.conf ]; then
+    sudo cp scripts/install/opensim.tmux.conf /home/${OS_USER}/.tmux.conf
+    sudo chown ${OS_USER}:${OS_USR} /home/${OS_USER}/.tmux.conf
+    sudo chmod 644 /home/${OS_USER}/.tmux.conf
+fi
+
+
+echo "Building OpenSim."
+sudo chown -R ${USER}:${USER} ${OS_PATH} *
+./BuildIt.sh
+
+
+cd scripts/install
+sudo ./secure.sh
 
 echo "Done installing OpenSim."
diff --git a/bin/config-include/config.ini.IG_example  b/bin/config-include/config.ini.IG_example 
deleted file mode 100644
index 710ccae..0000000
--- a/bin/config-include/config.ini.IG_example 
+++ /dev/null
@@ -1,54 +0,0 @@
-; **
-; * The Const section allows us to define some basic information that we
-; * will use throughout our configuration. We will provide examples for 
-; * setting the base url of the Robust server and the public and private ports
-; * it uses. Changing the values of the constants will set the operating
-; * parameters thoughout the configuration. Other constants that may prove
-; * to be useful may be added to the followin section. They may be 
-; * referenced anywhere in the configuration by using ${Const|Name}. One
-; * such use is providing a base path for setting locations that Robust
-; * uses to write data.
-
-; Also put grid specific stuff here.
-
-
-[Paths]
-    AssetsPath = "../../AssetFiles"
-    BackupPath = "../../backups"
-    CachePath = "../../caches"
-    DbPath = "../../db"
-    LogPath = "../../logs"
-
-
-[Const]
-;    MOTD = "onefang needs a little coding or sysadmin work to keep IG going.  Please help me find some."
-    MOTD = "More members are coming, slowly.  Invite your friends to."
-
-    GridName = "Infinite Grid"
-    ShortGridName = "IG"
-
-    ; For a grid these will usually be the externally accessible IP/DNS
-    ; name and use default public port 8002 and default private port 8003
-    ; For a standalone this will usually be the externally accessible IP/DNS
-    ; name and use default public port 9000. The private port is not used
-    ; in the configuration for a standalone.
-
-    ;# {BaseURL} {} {BaseURL} {"http://example.com" "http://127.0.0.1"} "http://127.0.0.1"
-    BaseHostname = "http://grid.infinitegrid.org"
-    HostName = "grid.infinitegrid.org"
-    BaseURL = http://grid.infinitegrid.org
-    GridURL = http://grid.infinitegrid.org
-
-    ;# {PublicPort} {} {PublicPort} {8002 9000} "8002"
-    PublicPort = "8002"
-
-    ;# {PrivatePort} {} {PrivatePort} {8003} "8003"
-    PrivatePort = "8003"
-
-
-    DataProvider = "OpenSim.Data.MySQL.dll"
-    ConnectionString = "Data Source=localhost;Database=****;User ID=****;Password=****;Old Guids=true;"
-
-
-    ; The public port of the Robust server -- THIS IS SPECIAL PORT FOR ASSSET SERVER
-    AssetServerPort = "8003"
diff --git a/bin/config-include/config_IG.ini b/bin/config-include/config_IG.ini
new file mode 100644
index 0000000..3ec215c
--- /dev/null
+++ b/bin/config-include/config_IG.ini
@@ -0,0 +1,46 @@
+ information that we
+; will use throughout our configuration. We will provide examples for 
+; setting the base url of the ROBUST server and the public and private ports
+; it uses.  Changing the values of the constants will set the operating
+; parameters thoughout the configuration.  Other constants that may prove
+; to be useful may be added to the followin section.  They may be 
+; referenced anywhere in the configuration by using ${Const|Name}.  One
+; such use is providing a base path for setting locations that ROBUST
+; uses to write data.
+
+; Also put grid specific stuff here.
+
+
+[Paths]
+    AssetsPath = "../../AssetFiles"
+    BackupPath = "../../backups"
+    CachePath = "../../caches"
+    DbPath = "../../db"
+    LogPath = "../../logs"
+
+
+[Const]
+    MOTD = "onefang needs a little coding or sysadmin work to keep IG going.  Please help me find some."
+
+    GridName = "Infinite Grid"
+    ShortGridName = "IG"
+
+    ; For a grid these will usually be the externally accessible IP/DNS
+    ; name and use default public port 8002 and default private port 8003
+    ; For a standalone this will usually be the externally accessible IP/DNS
+    ; name and use default public port 9000. The private port is not used
+    ; in the configuration for a standalone.
+    BaseHostname = "http://grid.infinitegrid.org"
+    HostName = "grid.infinitegrid.org"
+    BaseURL = ${Const|BaseHostname}
+    GridURL = ${Const|BaseHostname}
+
+    PublicPort = "8002"
+    PrivatePort = "8003"
+
+    ; The public port of the ROBUST asset server, which might be different.
+    AssetServerPort = "8003"
+
+    ; Database credentials.
+    DataProvider = "OpenSim.Data.MySQL.dll"
+    ConnectionString = "Data Source=MYSQL_HOST;Database=MYSQL_DB;User ID=MYSQL_USER;Password=MYSQL_PASSWORD;Old Guids=true;"
diff --git a/bin/config-include/config.ini.MG_example b/bin/config-include/config_MG.ini
index 737bff4..4f675d7 100644
--- a/bin/config-include/config.ini.MG_example
+++ b/bin/config-include/config_MG.ini
@@ -1,13 +1,12 @@
-; **
-; * The Const section allows us to define some basic information that we
-; * will use throughout our configuration. We will provide examples for 
-; * setting the base url of the Robust server and the public and private ports
-; * it uses. Changing the values of the constants will set the operating
-; * parameters thoughout the configuration. Other constants that may prove
-; * to be useful may be added to the followin section. They may be 
-; * referenced anywhere in the configuration by using ${Const|Name}. One
-; * such use is providing a base path for setting locations that Robust
-; * uses to write data.
+ information that we
+; will use throughout our configuration. We will provide examples for 
+; setting the base url of the ROBUST server and the public and private ports
+; it uses.  Changing the values of the constants will set the operating
+; parameters thoughout the configuration.  Other constants that may prove
+; to be useful may be added to the followin section.  They may be 
+; referenced anywhere in the configuration by using ${Const|Name}.  One
+; such use is providing a base path for setting locations that ROBUST
+; uses to write data.
 
 ; Also put grid specific stuff here.
 
@@ -31,28 +30,23 @@
     ; For a standalone this will usually be the externally accessible IP/DNS
     ; name and use default public port 9000. The private port is not used
     ; in the configuration for a standalone.
-
-    ;# {BaseURL} {} {BaseURL} {"http://example.com" "http://127.0.0.1"} "http://127.0.0.1"
     BaseHostname = "http://misfitzgrid.com"
     HostName = "misfitzgrid.com"
-    BaseURL = http://misfitzgrid.com
-    GridURL = http://misfitzgrid.com
+    BaseURL = ${Const|BaseHostname}
+    GridURL = ${Const|BaseHostname}
 
-    ;# {PublicPort} {} {PublicPort} {8002 9000} "8002"
     PublicPort = "8002"
-
-    ;# {PrivatePort} {} {PrivatePort} {8003} "8003"
     PrivatePort = "8003"
 
+    ; The public port of the ROBUST asset server, which might be different.
+    AssetServerPort = "8003"
 
+    ; Database credentials.
     DataProvider = "OpenSim.Data.MySQL.dll"
-    ConnectionString = "Data Source=localhost;Database=****;User ID=****;Password=****;Old Guids=true;"
-
+    ConnectionString = "Data Source=MYSQL_HOST;Database=MYSQL_DB;User ID=MYSQL_USER;Password=MYSQL_PASSWORD;Old Guids=true;"
 
     ; jOpenSim URL
     jOpensimURL = "http://misfitzgrid.com/members"
-    ; The public port of the Robust server -- THIS IS SPECIAL PORT FOR ASSSET SERVER
-    AssetServerPort = "8004"
 
 
 [Network]
diff --git a/bin/config-include/config.ini.localhost_example b/bin/config-include/config_localhost.ini
index aa26abd..31f2f2c 100644
--- a/bin/config-include/config.ini.localhost_example
+++ b/bin/config-include/config_localhost.ini
@@ -1,13 +1,12 @@
-; **
-; * The Const section allows us to define some basic information that we
-; * will use throughout our configuration. We will provide examples for 
-; * setting the base url of the Robust server and the public and private ports
-; * it uses. Changing the values of the constants will set the operating
-; * parameters thoughout the configuration. Other constants that may prove
-; * to be useful may be added to the followin section. They may be 
-; * referenced anywhere in the configuration by using ${Const|Name}. One
-; * such use is providing a base path for setting locations that Robust
-; * uses to write data.
+; ** information that we
+; will use throughout our configuration. We will provide examples for 
+; setting the base url of the ROBUST server and the public and private ports
+; it uses.  Changing the values of the constants will set the operating
+; parameters thoughout the configuration.  Other constants that may prove
+; to be useful may be added to the followin section.  They may be 
+; referenced anywhere in the configuration by using ${Const|Name}.  One
+; such use is providing a base path for setting locations that ROBUST
+; uses to write data.
 
 ; Also put grid specific stuff here.
 
@@ -31,22 +30,17 @@
     ; For a standalone this will usually be the externally accessible IP/DNS
     ; name and use default public port 9000. The private port is not used
     ; in the configuration for a standalone.
-
     BaseHostname = "127.0.0.1"
     HostName = "localhost"
     BaseURL = http://${Const|BaseHostname}
     GridURL = http://${Const|BaseHostname}
 
-    ;# {PublicPort} {} {PublicPort} {8002 9000} "8002"
     PublicPort = "8002"
-
-    ;# {PrivatePort} {} {PrivatePort} {8003} "8003"
     PrivatePort = "8003"
 
+    ; The public port of the ROBUST asset server, which might be different.
+    AssetServerPort = "8003"
 
+    ; Database credentials.
     DataProvider = "OpenSim.Data.MySQL.dll"
-    ConnectionString = "Data Source=localhost;Database=****;User ID=****;Password=****;Old Guids=true;"
-
-
-    ; The public port of the Robust server -- THIS IS SPECIAL PORT FOR ASSSET SERVER
-    AssetServerPort = "8003"
+    ConnectionString = "Data Source=MYSQL_HOST;Database=MYSQL_DB;User ID=MYSQL_USER;Password=MYSQL_PASSWORD;Old Guids=true;"
diff --git a/example/caches/MeshCache/.keep b/example/caches/MeshCache/.keep
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/example/caches/MeshCache/.keep
diff --git a/example/config/ROBUST/opensim-monit.conf b/example/config/ROBUST/opensim-monit.conf
index 70190b9..adce46d 100644
--- a/example/config/ROBUST/opensim-monit.conf
+++ b/example/config/ROBUST/opensim-monit.conf
@@ -21,10 +21,10 @@
 #
 # Hmmmm, seems that monit changing to a user and running bash -l is different from sudo changing to a user and running bash -l.
 #
-check process ROBUST with pidfile /var/run/opensim/ROBUST.pid
-    start program = "/usr/bin/sudo -Hu opensim /bin/bash -lc 'cd /opt/opensim/config/ROBUST && /opt/opensim/config/ROBUST/start-sim -q'"
+check process ROBUST with pidfile OS_PATH/caches/ROBUST.pid
+    start program = "/usr/bin/sudo -Hu opensim /bin/bash -lc 'cd OS_PATH/config/ROBUST && OS_PATH/config/ROBUST/start-sim -q'"
         as uid root and gid root
-    stop program = "/usr/bin/sudo -Hu opensim /bin/bash -lc 'cd /opt/opensim/config/ROBUST && /opt/opensim/config/ROBUST/stop-sim'" with timeout 600 seconds
+    stop program = "/usr/bin/sudo -Hu opensim /bin/bash -lc 'cd OS_PATH/config/ROBUST && OS_PATH/config/ROBUST/stop-sim'" with timeout 600 seconds
     if cpu usage > 50% for 4 cycles then restart
 #    if 5 restarts within 5 cycles then timeout
 #    if failed url http://127.0.0.1:9005/jsonSimStats/
diff --git a/example/config/config.ini b/example/config/config.ini
index 3890e66..510c8b6 100644
--- a/example/config/config.ini
+++ b/example/config/config.ini
@@ -1,13 +1,12 @@
-; **
-; * The Const section allows us to define some basic information that we
-; * will use throughout our configuration. We will provide examples for 
-; * setting the base url of the Robust server and the public and private ports
-; * it uses. Changing the values of the constants will set the operating
-; * parameters thoughout the configuration. Other constants that may prove
-; * to be useful may be added to the followin section. They may be 
-; * referenced anywhere in the configuration by using ${Const|Name}. One
-; * such use is providing a base path for setting locations that Robust
-; * uses to write data.
+; The Const section allows us to define some basic information that we
+; will use throughout our configuration. We will provide examples for 
+; setting the base url of the ROBUST server and the public and private ports
+; it uses.  Changing the values of the constants will set the operating
+; parameters thoughout the configuration.  Other constants that may prove
+; to be useful may be added to the followin section.  They may be 
+; referenced anywhere in the configuration by using ${Const|Name}.  One
+; such use is providing a base path for setting locations that ROBUST
+; uses to write data.
 
 ; Also put grid specific stuff here.
 
@@ -31,22 +30,17 @@
     ; For a standalone this will usually be the externally accessible IP/DNS
     ; name and use default public port 9000. The private port is not used
     ; in the configuration for a standalone.
-
     BaseHostname = "127.0.0.1"
     HostName = "localhost"
     BaseURL = http://${Const|BaseHostname}
     GridURL = http://${Const|BaseHostname}
 
-    ;# {PublicPort} {} {PublicPort} {8002 9000} "8002"
     PublicPort = "8002"
-
-    ;# {PrivatePort} {} {PrivatePort} {8003} "8003"
     PrivatePort = "8003"
 
+    ; The public port of the ROBUST asset server, which might be different.
+    AssetServerPort = "8003"
 
+    ; Database credentials.
     DataProvider = "OpenSim.Data.MySQL.dll"
     ConnectionString = "Data Source=MYSQL_HOST;Database=MYSQL_DB;User ID=MYSQL_USER;Password=MYSQL_PASSWORD;Old Guids=true;"
-
-
-    ; The public port of the Robust server -- THIS IS SPECIAL PORT FOR ASSSET SERVER
-    AssetServerPort = "8003"
diff --git a/example/config/sim_skeleton/My_sim.xml b/example/config/sim_skeleton/My_sim.xml
index c5723f3..f71df57 100644
--- a/example/config/sim_skeleton/My_sim.xml
+++ b/example/config/sim_skeleton/My_sim.xml
@@ -9,5 +9,12 @@
     <Key Name="RegionType" Value="private sim" />
     <Key Name="SizeX" Value="SIM_SIZE" />
     <Key Name="SizeY" Value="SIM_SIZE" />
+    <Key Name="SizeZ" Value="16384" />
+    <Key Name="MaxAgents" Value="100" />
+    <Key Name="MaxPrims" Value="45000" />
+    <Key Name="PhysicalPrimMax" Value="640" />
+    <Key Name="NonphysicalPrimMax" Value="2560" />
+    <Key Name="ClampPrimSize" Value="False" />
+    <Key Name="MaptileStaticUUID" Value="00000000-0000-0000-0000-000000000000" />
   </Section>
 </Nini>
diff --git a/example/config/sim_skeleton/ThisSim.ini b/example/config/sim_skeleton/ThisSim.ini
index 2f691f0..140cf3b 100644
--- a/example/config/sim_skeleton/ThisSim.ini
+++ b/example/config/sim_skeleton/ThisSim.ini
@@ -2,9 +2,24 @@
     mysim="SIM_NUMBER"
 
 [Startup]
-    PIDFile = "/var/run/opensim/sim${Const|mysim}.pid"
-    regionload_regionsdir="/opt/opensim/config/sim${Const|mysim}"
-    LogFile = "../logs/OpenSim_sim${Const|mysim}.log"
+    PIDFile = "${Paths|CachePath}/sim${Const|mysim}.pid"
+    LogFile = "${Paths|LogPath}/OpenSim_sim${Const|mysim}.log"
+    ConsoleHistoryFile = "${Paths|LogPath}/OpenSimConsoleHistory_sim${Const|mysim}.txt"
+    regionload_regionsdir="../../config/sim${Const|mysim}"
+
+[Map]
+    enablePosition = true
+    ; Only texture prims that have a diagonal size greater than this number.
+    TexturePrimSize = 1
 
 [Network]
     http_listener_port = SIM_PORT
+
+[Performance]
+    ;; Select the performance characteristirs of OpenSim.
+    ; Include-Performance = "config-include/SimFast.ini"
+    Include-Performance = "config-include/SimBalanced.ini"
+    ; Include-Performance = "config-include/SimDefault.ini"
+    ; Include-Performance = "config-include/SimLean.ini"
+                                                                                                                                                                                               │ 2621 mysql     20   0 4131620 483696  17640 S   0.3  2.9   8:07.82 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --plugin-dir=/usr/lib/x86_64-linux-gnu/mariadb18/plugin --user=m+ 
+ 
\ No newline at end of file
diff --git a/example/config/sim_skeleton/opensim-monit.conf b/example/config/sim_skeleton/opensim-monit.conf
index ac50fc2..fd9220f 100644
--- a/example/config/sim_skeleton/opensim-monit.conf
+++ b/example/config/sim_skeleton/opensim-monit.conf
@@ -13,12 +13,12 @@
 #
 # Hmmmm, seems that monit changing to a user and running bash -l is different from sudo changing to a user and running bash -l.
 #
-check process simSIM_NUMBER with pidfile /var/run/opensim/simSIM_NUMBER.pid
-    start program = "/usr/bin/sudo -Hu opensim /bin/bash -lc 'cd /opt/opensim/config/simSIM_NUMBER && /opt/opensim/config/simSIM_NUMBER/start-sim -q'"
+check process simSIM_NUMBER with pidfile OS_PATH/caches/simSIM_NUMBER.pid
+    start program = "/usr/bin/sudo -Hu opensim /bin/bash -lc 'cd OS_PATH/config/simSIM_NUMBER && OS_PATH/config/simSIM_NUMBER/start-sim -q'"
         as uid root and gid root
-    stop program = "/usr/bin/sudo -Hu opensim /bin/bash -lc 'cd /opt/opensim/config/simSIM_NUMBER && /opt/opensim/config/simSIM_NUMBER/stop-sim'" with timeout 600 seconds
+    stop program = "/usr/bin/sudo -Hu opensim /bin/bash -lc 'cd OS_PATH/config/simSIM_NUMBER && OS_PATH/config/simSIM_NUMBER/stop-sim'" with timeout 600 seconds
     if cpu usage > 50% for 4 cycles then restart
-    if MEMORY usage > 25% for 4 cycles then restart
+    if MEMORY usage > 10% for 4 cycles then restart
 #    if 5 restarts within 5 cycles then timeout
 #    if failed url http://127.0.0.1:9005/jsonSimStats/
 #        and content != '"SimFPS":0.0,' for 4 cycles
diff --git a/example/start.sh b/example/start.sh
index ce36d59..d6ef48d 100755
--- a/example/start.sh
+++ b/example/start.sh
@@ -1,4 +1,4 @@
 #!/bin/bash
 
-cd /opt/opensim-IG/current/bin
+cd /opt/opensim_SC/current/bin
 mono OpenSim.exe -inidirectory=../../config/simg01
diff --git a/scripts/backup-sims.sh b/scripts/backup-sims.sh
index b14acca..cadb9a2 100755
--- a/scripts/backup-sims.sh
+++ b/scripts/backup-sims.sh
@@ -6,9 +6,9 @@ getPrgDir
 for i in $(seq -w 1 99)
 do
     j=$(num2name ${i})
-    if [ -e "${PRGDIR}/../config/${j}" ]
+    if [ -e "${PRGDIR}/../../config/${j}" ]
     then
-        pushd ${PRGDIR}/../config/${j} >/dev/null
+        pushd ${PRGDIR}/../../config/${j} >/dev/null
         # Find out the size of the last backup, base our later sleep on that, but do it now before backup-sim packs it away.
         sizeSleep=`sleepPerSize o "$(getSimName ${i})"`
         ./backup-sim
diff --git a/scripts/common.sh b/scripts/common.sh
index 2ec19ce..c5a86ab 100755
--- a/scripts/common.sh
+++ b/scripts/common.sh
@@ -1,5 +1,7 @@
 #!/bin/echo Don't run this file, it's for common functions."
 
+OS_PATH="/opt/opensim_SC"
+OS_USER="opensimsc"
 
 # Figure out where we are, most of this mess is to troll through soft links.
 # PRGDIR=$(getPrgDir)
@@ -73,4 +75,3 @@ sleepPerSize()
     echo 200
   fi
 }
-
diff --git a/scripts/install/create_sim.sh b/scripts/install/create_sim.sh
index 0681067..08cedba 100755
--- a/scripts/install/create_sim.sh
+++ b/scripts/install/create_sim.sh
@@ -1,6 +1,6 @@
 #!/bin/bash
 
-source common.sh
+source ../common.sh
 getPrgDir
 
 NAME=$1
@@ -9,8 +9,7 @@ URL=$3
 IP=$4
 SIZE=$5
 
-OSPATH="/opt/opensim"
-cd $OSPATH/config
+cd ${OS_PATH}/config
 
 k=0
 for i in $(seq -w 1 99)
@@ -22,38 +21,37 @@ do
     fi
 done
 
-if [ "x$NAME" = "x" ]
+if [ "x${NAME}" = "x" ]
 then
     NAME="No name sim $RANDOM"  # Should be unique per grid.
-    echo "WARNING setting the sim name to [$NAME], this may not be what you want."
+    echo "WARNING setting the sim name to [${NAME}], this may not be what you want."
 fi
 # Sanitize the name.  Not removing [ or ], couldn't get that to work, only important for Windows.
-sim=$(sanitize $NAME)
+sim=$(sanitize ${NAME})
 
-if [ "x$LOCATION" = "x" ]
+if [ "x${LOCATION}" = "x" ]
 then
     LOCATION="$RANDOM,$RANDOM"  # again UNIQUE (i.e. ONLY ONE) per grid in THIS case!
-    echo "WARNING setting the Location to $LOCATION, this may not be what you want."
+    echo "WARNING setting the Location to ${LOCATION}, this may not be what you want."
 fi
 
-if [ "x$IP" = "x" ]
+if [ "x${IP}" = "x" ]
 then
-                                # 0.0.0.0 will work for a single sim per physical machine, otherwise we need the real internal IP.
     IP="0.0.0.0"
-    echo "WARNING setting the InternalAddress to $IP, this may not be what you want."
+    echo "WARNING setting the InternalAddress to ${IP}, this may not be what you want."
 #    echo "  0.0.0.0 will work for a single sim per physical machine, otherwise we need the real internal IP."
 # According to the OpenSim docs, 0.0.0.0 means to listen on all NICs the machine has, which should work fine.
 fi
 
-if [ "x$URL" = "x" ]
+if [ "x${URL}" = "x" ]
 then
 # Here we make use of an external IP finding service.  Careful, it may move.
 #    URL=$(wget -q http://automation.whatismyip.com/n09230945.asp -O -) # URL is best (without the HTTP://), but IP (e.g. 88.109.81.55) works too.
     URL="SYSTEMIP"
-    echo "WARNING setting the ExternalHostName to $URL, this may not be what you want."
+    echo "WARNING setting the ExternalHostName to ${URL}, this may not be what you want."
 fi
 
-if [ "x$SIZE" = "x" ]
+if [ "x${SIZE}" = "x" ]
 then
     SIZE="256"
 fi
@@ -68,29 +66,30 @@ fi
 PORT=$(( 9005 + (10#$k * 5) ))  # 9002 is used for HTTP/UDP so START with port 9003! CAUTION Diva/D2 starts at port 9000.
 UUID=$(uuidgen)
 
-echo "Creating sim$NUM on port $PORT @ $LOCATION - $NAME."
+echo "Creating sim${NUM} on port ${PORT} @ ${LOCATION} - ${NAME}."
 
-cp -r sim_skeleton sim$NUM
+cp -r sim_skeleton sim${NUM}
 
-cd sim$NUM
+cd sim${NUM}
 mv My_sim.xml ${sim}.xml
-sed -i "s@SIM_NAME@$NAME@g" ${sim}.xml
-sed -i "s@SIM_UUID@$UUID@g" ${sim}.xml
-sed -i "s@SIM_POS@$LOCATION@g" ${sim}.xml
-sed -i "s@SIM_IP@$IP@g" ${sim}.xml
-sed -i "s@SIM_INT_PORT@$(( $PORT + 1 ))@g" ${sim}.xml
-sed -i "s@SIM_URL@$URL@g" ${sim}.xml
-sed -i "s@SIM_SIZE@$SIZE@g" ${sim}.xml
+sed -i "s@SIM_NAME@${NAME}@g" ${sim}.xml
+sed -i "s@SIM_UUID@${UUID}@g" ${sim}.xml
+sed -i "s@SIM_POS@${LOCATION}@g" ${sim}.xml
+sed -i "s@SIM_IP@${IP}@g" ${sim}.xml
+sed -i "s@SIM_INT_PORT@$(( ${PORT} + 1 ))@g" ${sim}.xml
+sed -i "s@SIM_URL@${URL}@g" ${sim}.xml
+sed -i "s@SIM_SIZE@${SIZE}@g" ${sim}.xml
 
 ln -s ../../current/scripts/common.sh common.sh
 ln -s ../../current/scripts/start-sim start-sim
 cp -P start-sim backup-sim
 cp -P start-sim stop-sim
 
-sed -i "s@SIM_NUMBER@$NUM@g" ThisSim.ini
-sed -i "s@SIM_PORT@$PORT@g" ThisSim.ini
+sed -i "s@SIM_NUMBER@${NUM}@g" ThisSim.ini
+sed -i "s@SIM_PORT@${PORT}@g" ThisSim.ini
 
-sed -i "s@SIM_NUMBER@$NUM@g" opensim-monit.conf
+sed -i "s@OS_PATH@${OS_PATH}@g" opensim-monit.conf
+sed -i "s@SIM_NUMBER@${NUM}@g" opensim-monit.conf
 
-sudo chown -R opensim:opensim ..
+sudo chown -R ${OS_USER}:${OS_USER} ..
 sudo chmod -R g+w ..
diff --git a/scripts/install/go_live.sh b/scripts/install/go_live.sh
index 21d7072..c5ce90e 100755
--- a/scripts/install/go_live.sh
+++ b/scripts/install/go_live.sh
@@ -1,6 +1,6 @@
 #!/bin/bash
 
-OSPATH="/opt/opensim"
+source common.sh
 
 for i in $(seq 99)
 do
diff --git a/scripts/install/opensim-monit.conf b/scripts/install/opensim-monit.conf
index 7785056..409b69e 100644
--- a/scripts/install/opensim-monit.conf
+++ b/scripts/install/opensim-monit.conf
@@ -9,23 +9,16 @@
 # on ubuntu/debian, this is overridden by the CHECK_INTERVALS var in
 # /etc/default/monit .  the below assumes you've set it to 30 seconds.
 #
-# if process dies, will restart sim within 30 seconds.  if process
-# dies 5 times in as many tries, will stop trying and send email
-# alert.
-#
-# if SimFPS drops to 0 for 2 minutes, restart.
-#
-# if process CPU usage stays above 300% for 2 minutes, restart.
-#
 # see ../README for configuration instructions.
 #
 # Hmmmm, seems that monit changing to a user and running bash -l is different from sudo changing to a user and running bash -l.
 #
-check process sim01 with pidfile /var/run/opensim/sim01.pid
-    start program = "/usr/bin/sudo -Hu opensim /bin/bash -lc 'cd /opt/opensim/config/sim01 && /opt/opensim/config/sim01/start-sim -q'"
+check process simSIM_NUMBER with pidfile /OS_PATH/caches/simSIM_NUMBER.pid
+    start program = "/usr/bin/sudo -Hu opensim /bin/bash -lc 'cd /OS_PATH/config/simSIM_NUMBER && /OS_PATH/config/simSIM_NUMBER/start-sim -q'"
         as uid root and gid root
-    stop program = "/usr/bin/sudo -Hu opensim /bin/bash -lc 'cd /opt/opensim/config/sim01 && /opt/opensim/config/sim01/stop-sim'" with timeout 600 seconds
+    stop program = "/usr/bin/sudo -Hu opensim /bin/bash -lc 'cd /OS_PATH/config/simSIM_NUMBER && /OS_PATH/config/simSIM_NUMBER/stop-sim'" with timeout 600 seconds
     if cpu usage > 50% for 4 cycles then restart
+    if MEMORY usage > 10% for 4 cycles then restart
 #    if 5 restarts within 5 cycles then timeout
 #    if failed url http://127.0.0.1:9005/jsonSimStats/
 #        and content != '"SimFPS":0.0,' for 4 cycles
@@ -33,4 +26,4 @@ check process sim01 with pidfile /var/run/opensim/sim01.pid
 #    if failed url http://127.0.0.1:9008/jsonSimStats/
 #        and content == '"SimFPS":' for 4 cycles
 #        then restart
-
+    depends on ROBUST
diff --git a/scripts/install/secure.sh b/scripts/install/secure.sh
new file mode 100755
index 0000000..48255b6
--- /dev/null
+++ b/scripts/install/secure.sh
@@ -0,0 +1,20 @@
+#!/bin/bash
+
+source ../common.sh
+
+echo "Securing OpenSim."
+sudo chmod 600 ${OS_PATH}/config/*.ini
+sudo chown -R ${OS_USER}:${OS_USER} ${OS_PATH}
+sudo chmod -R 775 ${OS_PATH}
+sudo chmod -R a-x ${OS_PATH}
+sudo chmod -R a+X ${OS_PATH}
+sudo chmod -R g+w ${OS_PATH}
+sudo chmod -R a+x ${OS_PATH}/current/*.sh
+sudo chmod -R a+x ${OS_PATH}/current/scripts/*.sh
+sudo chmod -R a+x ${OS_PATH}/current/scripts/install/*.sh
+sudo chmod a+x ${OS_PATH}/current/scripts/show-console
+sudo chmod a+x ${OS_PATH}/current/scripts/start-sim
+
+sudo chmod ug+rwx  ${OS_PATH}/config
+sudo chmod g+s     ${OS_PATH}/config
+sudo chmod 600 ${OS_PATH}/config/*.ini
diff --git a/scripts/start-sim b/scripts/start-sim
index bd0815f..e82547a 100755
--- a/scripts/start-sim
+++ b/scripts/start-sim
@@ -38,11 +38,11 @@ fi
 if [ "x$1" = "x" ]; then
     tgt=$(basename $(pwd))
     num="$(echo ${tgt} | cut -c 4-)"
-elif [ -d "./$1" ]; then
+elif [ -d "$1" ]; then
     tgt=$1
-elif [ -d "./sim$1" ]; then
+elif [ -d "sim$1" ]; then
     num=$1
-    tgt="./sim${num}"
+    tgt="sim${num}"
 else
     tgt=$1
     inventory=$1
@@ -77,14 +77,14 @@ fi
 
 case $(basename $0) in 
     "start-sim")
-        cmd="mono ${exe}.exe -inidirectory=${tgt} "
+        cmd="mono ${exe}.exe -inidirectory=../../config/${tgt} "
 
         # Check if it's already running.
         if [ -e /var/run/opensim/${tgt}.pid ]
         then
             # Double check if it's REALLY running.
-            if [ "x$(ps -p $(cat /var/run/opensim/${tgt}.pid) --no-headers -o comm)" = "x" ]; then
-                $SUDO rm -f /var/run/opensim/${tgt}.pid
+            if [ "x$(ps -p $(cat ${PRGDIR}/../../caches/${tgt}.pid) --no-headers -o comm)" = "x" ]; then
+                $SUDO rm -f  ${PRGDIR}/../../caches/${tgt}.pid
             fi
         fi
         # Now see if it's really really running.  lol
@@ -92,9 +92,9 @@ case $(basename $0) in
         then
             if [ "x$tgt" = "xROBUST" ]; then
 # TODO - the problem here is that the > bit is executed as onefang, not as opensim.
-                $SUDO cat ../config/config.ini ../config/Robust.ini.template >../config/Robust.ini
-#               $SUDO chown -R opensim:opensim ../config/Robust.ini
-                chmod 640 ../config/Robust.ini
+                $SUDO cat ${PRGDIR}/../../config/config.ini ${PRGDIR}/../../config/Robust.ini.template >${PRGDIR}/../../config/Robust.ini
+#               $SUDO chown -R opensim:opensim ${PRGDIR}/../../config/Robust.ini
+                chmod 640 ${PRGDIR}/../../config/Robust.ini
                 ${tmux_command} split-window -hp 50 -t "${tmux_session}:" "${cmd}"
             else
                 ${tmux_command} new-window -dn "${title}" -t "${tmux_session}:${num}" "${cmd}"