Major renaming of Physics dlls / folders. No functional changes, just renames.

1 files changed, 854 insertions, 0 deletions

diff --git a/OpenSim/Region/PhysicsModules/BulletS/BSLinksetConstraints.cs b/OpenSim/Region/PhysicsModules/BulletS/BSLinksetConstraints.cs
new file mode 100755
index 0000000..4384cdc
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/BSLinksetConstraints.cs
@@ -0,0 +1,854 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyrightD
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+using System;
+using System.Collections.Generic;
+using System.Text;
+
+using OpenSim.Region.OptionalModules.Scripting;
+
+using OMV = OpenMetaverse;
+
+namespace OpenSim.Region.Physics.BulletSPlugin
+{
+public sealed class BSLinksetConstraints : BSLinkset
+{
+    // private static string LogHeader = "[BULLETSIM LINKSET CONSTRAINTS]";
+
+    public class BSLinkInfoConstraint : BSLinkInfo
+    {
+        public ConstraintType constraintType;
+        public BSConstraint constraint;
+        public OMV.Vector3 linearLimitLow;
+        public OMV.Vector3 linearLimitHigh;
+        public OMV.Vector3 angularLimitLow;
+        public OMV.Vector3 angularLimitHigh;
+        public bool useFrameOffset;
+        public bool enableTransMotor;
+        public float transMotorMaxVel;
+        public float transMotorMaxForce;
+        public float cfm;
+        public float erp;
+        public float solverIterations;
+        //
+        public OMV.Vector3 frameInAloc;
+        public OMV.Quaternion frameInArot;
+        public OMV.Vector3 frameInBloc;
+        public OMV.Quaternion frameInBrot;
+        public bool useLinearReferenceFrameA;
+        // Spring
+        public bool[] springAxisEnable;
+        public float[] springDamping;
+        public float[] springStiffness;
+        public OMV.Vector3 springLinearEquilibriumPoint;
+        public OMV.Vector3 springAngularEquilibriumPoint;
+
+        public BSLinkInfoConstraint(BSPrimLinkable pMember)
+            : base(pMember)
+        {
+            constraint = null;
+            ResetLink();
+            member.PhysScene.DetailLog("{0},BSLinkInfoConstraint.creation", member.LocalID);
+        }
+
+        // Set all the parameters for this constraint to a fixed, non-movable constraint.
+        public override void ResetLink()
+        {
+            // constraintType = ConstraintType.D6_CONSTRAINT_TYPE;
+            constraintType = ConstraintType.BS_FIXED_CONSTRAINT_TYPE;
+            linearLimitLow = OMV.Vector3.Zero;
+            linearLimitHigh = OMV.Vector3.Zero;
+            angularLimitLow = OMV.Vector3.Zero;
+            angularLimitHigh = OMV.Vector3.Zero;
+            useFrameOffset = BSParam.LinkConstraintUseFrameOffset;
+            enableTransMotor = BSParam.LinkConstraintEnableTransMotor;
+            transMotorMaxVel = BSParam.LinkConstraintTransMotorMaxVel;
+            transMotorMaxForce = BSParam.LinkConstraintTransMotorMaxForce;
+            cfm = BSParam.LinkConstraintCFM;
+            erp = BSParam.LinkConstraintERP;
+            solverIterations = BSParam.LinkConstraintSolverIterations;
+            frameInAloc = OMV.Vector3.Zero;
+            frameInArot = OMV.Quaternion.Identity;
+            frameInBloc = OMV.Vector3.Zero;
+            frameInBrot = OMV.Quaternion.Identity;
+            useLinearReferenceFrameA = true;
+            springAxisEnable = new bool[6];
+            springDamping = new float[6];
+            springStiffness = new float[6];
+            for (int ii = 0; ii < springAxisEnable.Length; ii++)
+            {
+                springAxisEnable[ii] = false;
+                springDamping[ii] = BSAPITemplate.SPRING_NOT_SPECIFIED;
+                springStiffness[ii] = BSAPITemplate.SPRING_NOT_SPECIFIED;
+            }
+            springLinearEquilibriumPoint = OMV.Vector3.Zero;
+            springAngularEquilibriumPoint = OMV.Vector3.Zero;
+            member.PhysScene.DetailLog("{0},BSLinkInfoConstraint.ResetLink", member.LocalID);
+        }
+
+        // Given a constraint, apply the current constraint parameters to same.
+        public override void SetLinkParameters(BSConstraint constrain)
+        {
+            member.PhysScene.DetailLog("{0},BSLinkInfoConstraint.SetLinkParameters,type={1}", member.LocalID, constraintType);
+            switch (constraintType)
+            {
+                case ConstraintType.BS_FIXED_CONSTRAINT_TYPE:
+                case ConstraintType.D6_CONSTRAINT_TYPE:
+                    BSConstraint6Dof constrain6dof = constrain as BSConstraint6Dof;
+                    if (constrain6dof != null)
+                    {
+                        // NOTE: D6_SPRING_CONSTRAINT_TYPE should be updated if you change any of this code.
+                        // zero linear and angular limits makes the objects unable to move in relation to each other
+                        constrain6dof.SetLinearLimits(linearLimitLow, linearLimitHigh);
+                        constrain6dof.SetAngularLimits(angularLimitLow, angularLimitHigh);
+
+                        // tweek the constraint to increase stability
+                        constrain6dof.UseFrameOffset(useFrameOffset);
+                        constrain6dof.TranslationalLimitMotor(enableTransMotor, transMotorMaxVel, transMotorMaxForce);
+                        constrain6dof.SetCFMAndERP(cfm, erp);
+                        if (solverIterations != 0f)
+                        {
+                            constrain6dof.SetSolverIterations(solverIterations);
+                        }
+                    }
+                    break;
+                case ConstraintType.D6_SPRING_CONSTRAINT_TYPE:
+                    BSConstraintSpring constrainSpring = constrain as BSConstraintSpring;
+                    if (constrainSpring != null)
+                    {
+                        // zero linear and angular limits makes the objects unable to move in relation to each other
+                        constrainSpring.SetLinearLimits(linearLimitLow, linearLimitHigh);
+                        constrainSpring.SetAngularLimits(angularLimitLow, angularLimitHigh);
+
+                        // tweek the constraint to increase stability
+                        constrainSpring.UseFrameOffset(useFrameOffset);
+                        constrainSpring.TranslationalLimitMotor(enableTransMotor, transMotorMaxVel, transMotorMaxForce);
+                        constrainSpring.SetCFMAndERP(cfm, erp);
+                        if (solverIterations != 0f)
+                        {
+                            constrainSpring.SetSolverIterations(solverIterations);
+                        }
+                        for (int ii = 0; ii < springAxisEnable.Length; ii++)
+                        {
+                            constrainSpring.SetAxisEnable(ii, springAxisEnable[ii]);
+                            if (springDamping[ii] != BSAPITemplate.SPRING_NOT_SPECIFIED)
+                                constrainSpring.SetDamping(ii, springDamping[ii]);
+                            if (springStiffness[ii] != BSAPITemplate.SPRING_NOT_SPECIFIED)
+                                constrainSpring.SetStiffness(ii, springStiffness[ii]);
+                        }
+                        constrainSpring.CalculateTransforms();
+
+                        if (springLinearEquilibriumPoint != OMV.Vector3.Zero)
+                            constrainSpring.SetEquilibriumPoint(springLinearEquilibriumPoint, springAngularEquilibriumPoint);
+                        else
+                            constrainSpring.SetEquilibriumPoint(BSAPITemplate.SPRING_NOT_SPECIFIED, BSAPITemplate.SPRING_NOT_SPECIFIED);
+                    }
+                    break;
+                default:
+                    break;
+            }
+        }
+
+        // Return 'true' if the property updates from the physics engine should be reported
+        //    to the simulator.
+        // If the constraint is fixed, we don't need to report as the simulator and viewer will
+        //    report the right things.
+        public override bool ShouldUpdateChildProperties()
+        {
+            bool ret = true;
+            if (constraintType == ConstraintType.BS_FIXED_CONSTRAINT_TYPE)
+                ret = false;
+
+            return ret;
+        }
+    }
+
+    public BSLinksetConstraints(BSScene scene, BSPrimLinkable parent) : base(scene, parent)
+    {
+        LinksetImpl = LinksetImplementation.Constraint;
+    }
+
+    private static string LogHeader = "[BULLETSIM LINKSET CONSTRAINT]";
+
+    // When physical properties are changed the linkset needs to recalculate
+    //   its internal properties.
+    // This is queued in the 'post taint' queue so the
+    //   refresh will happen once after all the other taints are applied.
+    public override void Refresh(BSPrimLinkable requestor)
+    {
+        ScheduleRebuild(requestor);
+        base.Refresh(requestor);
+
+    }
+
+    private void ScheduleRebuild(BSPrimLinkable requestor)
+    {
+        DetailLog("{0},BSLinksetConstraint.ScheduleRebuild,,rebuilding={1},hasChildren={2},actuallyScheduling={3}",
+                            requestor.LocalID, Rebuilding, HasAnyChildren, (!Rebuilding && HasAnyChildren));
+
+        // When rebuilding, it is possible to set properties that would normally require a rebuild.
+        //    If already rebuilding, don't request another rebuild.
+        //    If a linkset with just a root prim (simple non-linked prim) don't bother rebuilding.
+        lock (this)
+        {
+            if (!RebuildScheduled)
+            {
+                if (!Rebuilding && HasAnyChildren)
+                {
+                    RebuildScheduled = true;
+                    // Queue to happen after all the other taint processing
+                    m_physicsScene.PostTaintObject("BSLinksetContraints.Refresh", requestor.LocalID, delegate()
+                    {
+                        if (HasAnyChildren)
+                        {
+                            // Constraints that have not been changed are not rebuild but make sure
+                            //     the constraint of the requestor is rebuilt.
+                            PhysicallyUnlinkAChildFromRoot(LinksetRoot, requestor);
+                            // Rebuild the linkset and all its constraints.
+                            RecomputeLinksetConstraints();
+                        }
+                        RebuildScheduled = false;
+                    });
+                }
+            }
+        }
+    }
+
+    // The object is going dynamic (physical). Do any setup necessary
+    //     for a dynamic linkset.
+    // Only the state of the passed object can be modified. The rest of the linkset
+    //     has not yet been fully constructed.
+    // Return 'true' if any properties updated on the passed object.
+    // Called at taint-time!
+    public override bool MakeDynamic(BSPrimLinkable child)
+    {
+        bool ret = false;
+        DetailLog("{0},BSLinksetConstraints.MakeDynamic,call,IsRoot={1}", child.LocalID, IsRoot(child));
+        if (IsRoot(child))
+        {
+            // The root is going dynamic. Rebuild the linkset so parts and mass get computed properly.
+            Refresh(LinksetRoot);
+        }
+        return ret;
+    }
+
+    // The object is going static (non-physical). Do any setup necessary for a static linkset.
+    // Return 'true' if any properties updated on the passed object.
+    // This doesn't normally happen -- OpenSim removes the objects from the physical
+    //     world if it is a static linkset.
+    // Called at taint-time!
+    public override bool MakeStatic(BSPrimLinkable child)
+    {
+        bool ret = false;
+
+        DetailLog("{0},BSLinksetConstraint.MakeStatic,call,IsRoot={1}", child.LocalID, IsRoot(child));
+        child.ClearDisplacement();
+        if (IsRoot(child))
+        {
+            // Schedule a rebuild to verify that the root shape is set to the real shape.
+            Refresh(LinksetRoot);
+        }
+        return ret;
+    }
+
+    // Called at taint-time!!
+    public override void UpdateProperties(UpdatedProperties whichUpdated, BSPrimLinkable pObj)
+    {
+        // Nothing to do for constraints on property updates
+    }
+
+    // Routine called when rebuilding the body of some member of the linkset.
+    // Destroy all the constraints have have been made to root and set
+    //     up to rebuild the constraints before the next simulation step.
+    // Returns 'true' of something was actually removed and would need restoring
+    // Called at taint-time!!
+    public override bool RemoveDependencies(BSPrimLinkable child)
+    {
+        bool ret = false;
+
+        DetailLog("{0},BSLinksetConstraint.RemoveDependencies,removeChildrenForRoot,rID={1},rBody={2}",
+                                    child.LocalID, LinksetRoot.LocalID, LinksetRoot.PhysBody.AddrString);
+
+        lock (m_linksetActivityLock)
+        {
+            // Just undo all the constraints for this linkset. Rebuild at the end of the step.
+            ret = PhysicallyUnlinkAllChildrenFromRoot(LinksetRoot);
+            // Cause the constraints, et al to be rebuilt before the next simulation step.
+            Refresh(LinksetRoot);
+        }
+        return ret;
+    }
+
+    // ================================================================
+
+    // Add a new child to the linkset.
+    // Called while LinkActivity is locked.
+    protected override void AddChildToLinkset(BSPrimLinkable child)
+    {
+        if (!HasChild(child))
+        {
+            m_children.Add(child, new BSLinkInfoConstraint(child));
+
+            DetailLog("{0},BSLinksetConstraints.AddChildToLinkset,call,child={1}", LinksetRoot.LocalID, child.LocalID);
+
+            // Cause constraints and assorted properties to be recomputed before the next simulation step.
+            Refresh(LinksetRoot);
+        }
+        return;
+    }
+
+    // Remove the specified child from the linkset.
+    // Safe to call even if the child is not really in my linkset.
+    protected override void RemoveChildFromLinkset(BSPrimLinkable child, bool inTaintTime)
+    {
+        if (m_children.Remove(child))
+        {
+            BSPrimLinkable rootx = LinksetRoot; // capture the root and body as of now
+            BSPrimLinkable childx = child;
+
+            DetailLog("{0},BSLinksetConstraints.RemoveChildFromLinkset,call,rID={1},rBody={2},cID={3},cBody={4}",
+                            childx.LocalID,
+                            rootx.LocalID, rootx.PhysBody.AddrString,
+                            childx.LocalID, childx.PhysBody.AddrString);
+
+            m_physicsScene.TaintedObject(inTaintTime, childx.LocalID, "BSLinksetConstraints.RemoveChildFromLinkset", delegate()
+            {
+                PhysicallyUnlinkAChildFromRoot(rootx, childx);
+            });
+            // See that the linkset parameters are recomputed at the end of the taint time.
+            Refresh(LinksetRoot);
+        }
+        else
+        {
+            // Non-fatal occurance.
+            // PhysicsScene.Logger.ErrorFormat("{0}: Asked to remove child from linkset that was not in linkset", LogHeader);
+        }
+        return;
+    }
+
+    // Create a constraint between me (root of linkset) and the passed prim (the child).
+    // Called at taint time!
+    private void PhysicallyLinkAChildToRoot(BSPrimLinkable rootPrim, BSPrimLinkable childPrim)
+    {
+        // Don't build the constraint when asked. Put it off until just before the simulation step.
+        Refresh(rootPrim);
+    }
+
+    // Create a static constraint between the two passed objects
+    private BSConstraint BuildConstraint(BSPrimLinkable rootPrim, BSLinkInfo li)
+    {
+        BSLinkInfoConstraint linkInfo = li as BSLinkInfoConstraint;
+        if (linkInfo == null)
+            return null;
+
+        // Zero motion for children so they don't interpolate
+        li.member.ZeroMotion(true);
+
+        BSConstraint constrain = null;
+
+        switch (linkInfo.constraintType)
+        {
+            case ConstraintType.BS_FIXED_CONSTRAINT_TYPE:
+            case ConstraintType.D6_CONSTRAINT_TYPE:
+                // Relative position normalized to the root prim
+                // Essentually a vector pointing from center of rootPrim to center of li.member
+                OMV.Vector3 childRelativePosition = linkInfo.member.Position - rootPrim.Position;
+
+                // real world coordinate of midpoint between the two objects
+                OMV.Vector3 midPoint = rootPrim.Position + (childRelativePosition / 2);
+
+                DetailLog("{0},BSLinksetConstraint.BuildConstraint,6Dof,rBody={1},cBody={2},rLoc={3},cLoc={4},midLoc={5}",
+                                                rootPrim.LocalID, rootPrim.PhysBody, linkInfo.member.PhysBody,
+                                                rootPrim.Position, linkInfo.member.Position, midPoint);
+
+                // create a constraint that allows no freedom of movement between the two objects
+                // http://bulletphysics.org/Bullet/phpBB3/viewtopic.php?t=4818
+
+                constrain = new BSConstraint6Dof(
+                                    m_physicsScene.World, rootPrim.PhysBody, linkInfo.member.PhysBody, midPoint, true, true );
+
+                /* NOTE: below is an attempt to build constraint with full frame computation, etc.
+                 *     Using the midpoint is easier since it lets the Bullet code manipulate the transforms
+                 *     of the objects.
+                 * Code left for future programmers.
+                // ==================================================================================
+                // relative position normalized to the root prim
+                OMV.Quaternion invThisOrientation = OMV.Quaternion.Inverse(rootPrim.Orientation);
+                OMV.Vector3 childRelativePosition = (liConstraint.member.Position - rootPrim.Position) * invThisOrientation;
+
+                // relative rotation of the child to the parent
+                OMV.Quaternion childRelativeRotation = invThisOrientation * liConstraint.member.Orientation;
+                OMV.Quaternion inverseChildRelativeRotation = OMV.Quaternion.Inverse(childRelativeRotation);
+
+                DetailLog("{0},BSLinksetConstraint.PhysicallyLinkAChildToRoot,taint,root={1},child={2}", rootPrim.LocalID, rootPrim.LocalID, liConstraint.member.LocalID);
+                constrain = new BS6DofConstraint(
+                                PhysicsScene.World, rootPrim.Body, liConstraint.member.Body,
+                                OMV.Vector3.Zero,
+                                OMV.Quaternion.Inverse(rootPrim.Orientation),
+                                OMV.Vector3.Zero,
+                                OMV.Quaternion.Inverse(liConstraint.member.Orientation),
+                                true,
+                                true
+                                );
+                // ==================================================================================
+                */
+
+                break;
+            case ConstraintType.D6_SPRING_CONSTRAINT_TYPE:
+                constrain = new BSConstraintSpring(m_physicsScene.World, rootPrim.PhysBody, linkInfo.member.PhysBody,
+                                linkInfo.frameInAloc, linkInfo.frameInArot, linkInfo.frameInBloc, linkInfo.frameInBrot,
+                                linkInfo.useLinearReferenceFrameA,
+                                true /*disableCollisionsBetweenLinkedBodies*/);
+                DetailLog("{0},BSLinksetConstraint.BuildConstraint,spring,root={1},rBody={2},child={3},cBody={4},rLoc={5},cLoc={6}",
+                                                rootPrim.LocalID,
+                                                rootPrim.LocalID, rootPrim.PhysBody.AddrString,
+                                                linkInfo.member.LocalID, linkInfo.member.PhysBody.AddrString,
+                                                rootPrim.Position, linkInfo.member.Position);
+
+                break;
+            default:
+                break;
+        }
+
+        linkInfo.SetLinkParameters(constrain);
+
+        m_physicsScene.Constraints.AddConstraint(constrain);
+
+        return constrain;
+    }
+
+    // Remove linkage between the linkset root and a particular child
+    // The root and child bodies are passed in because we need to remove the constraint between
+    //      the bodies that were present at unlink time.
+    // Called at taint time!
+    private bool PhysicallyUnlinkAChildFromRoot(BSPrimLinkable rootPrim, BSPrimLinkable childPrim)
+    {
+        bool ret = false;
+        DetailLog("{0},BSLinksetConstraint.PhysicallyUnlinkAChildFromRoot,taint,root={1},rBody={2},child={3},cBody={4}",
+                            rootPrim.LocalID,
+                            rootPrim.LocalID, rootPrim.PhysBody.AddrString,
+                            childPrim.LocalID, childPrim.PhysBody.AddrString);
+
+        // If asked to unlink root from root, just remove all the constraints
+        if (rootPrim == childPrim || childPrim == LinksetRoot)
+        {
+            PhysicallyUnlinkAllChildrenFromRoot(LinksetRoot);
+            ret = true;
+        }
+        else
+        {
+            // Find the constraint for this link and get rid of it from the overall collection and from my list
+            if (m_physicsScene.Constraints.RemoveAndDestroyConstraint(rootPrim.PhysBody, childPrim.PhysBody))
+            {
+                // Make the child refresh its location
+                m_physicsScene.PE.PushUpdate(childPrim.PhysBody);
+                ret = true;
+            }
+        }
+
+        return ret;
+    }
+
+    // Remove linkage between myself and any possible children I might have.
+    // Returns 'true' of any constraints were destroyed.
+    // Called at taint time!
+    private bool PhysicallyUnlinkAllChildrenFromRoot(BSPrimLinkable rootPrim)
+    {
+        DetailLog("{0},BSLinksetConstraint.PhysicallyUnlinkAllChildren,taint", rootPrim.LocalID);
+
+        return m_physicsScene.Constraints.RemoveAndDestroyConstraint(rootPrim.PhysBody);
+    }
+
+    // Call each of the constraints that make up this linkset and recompute the
+    //    various transforms and variables. Create constraints of not created yet.
+    // Called before the simulation step to make sure the constraint based linkset
+    //    is all initialized.
+    // Called at taint time!!
+    private void RecomputeLinksetConstraints()
+    {
+        float linksetMass = LinksetMass;
+        LinksetRoot.UpdatePhysicalMassProperties(linksetMass, true);
+
+        DetailLog("{0},BSLinksetConstraint.RecomputeLinksetConstraints,set,rBody={1},linksetMass={2}",
+                            LinksetRoot.LocalID, LinksetRoot.PhysBody.AddrString, linksetMass);
+
+        try
+        {
+            Rebuilding = true;
+
+            // There is no reason to build all this physical stuff for a non-physical linkset.
+            if (!LinksetRoot.IsPhysicallyActive || !HasAnyChildren)
+            {
+                DetailLog("{0},BSLinksetConstraint.RecomputeLinksetCompound,notPhysicalOrNoChildren", LinksetRoot.LocalID);
+                return; // Note the 'finally' clause at the botton which will get executed.
+            }
+
+            ForEachLinkInfo((li) =>
+            {
+                // A child in the linkset physically shows the mass of the whole linkset.
+                // This allows Bullet to apply enough force on the child to move the whole linkset.
+                // (Also do the mass stuff before recomputing the constraint so mass is not zero.)
+                li.member.UpdatePhysicalMassProperties(linksetMass, true);
+
+                BSConstraint constrain;
+                if (!m_physicsScene.Constraints.TryGetConstraint(LinksetRoot.PhysBody, li.member.PhysBody, out constrain))
+                {
+                    // If constraint doesn't exist yet, create it.
+                    constrain = BuildConstraint(LinksetRoot, li);
+                }
+                li.SetLinkParameters(constrain);
+                constrain.RecomputeConstraintVariables(linksetMass);
+
+                // PhysicsScene.PE.DumpConstraint(PhysicsScene.World, constrain.Constraint);    // DEBUG DEBUG
+                return false;   // 'false' says to keep processing other members
+            });
+        }
+        finally
+        {
+            Rebuilding = false;
+        }
+    }
+
+    #region Extension
+    public override object Extension(string pFunct, params object[] pParams)
+    {
+        object ret = null;
+        switch (pFunct)
+        {
+            // pParams = [ BSPhysObject root, BSPhysObject child, integer linkType ]
+            case ExtendedPhysics.PhysFunctChangeLinkType:
+                if (pParams.Length > 2)
+                {
+                    int requestedType = (int)pParams[2];
+                    DetailLog("{0},BSLinksetConstraint.ChangeLinkType,requestedType={1}", LinksetRoot.LocalID, requestedType);
+                    if (requestedType == (int)ConstraintType.BS_FIXED_CONSTRAINT_TYPE
+                        || requestedType == (int)ConstraintType.D6_CONSTRAINT_TYPE
+                        || requestedType == (int)ConstraintType.D6_SPRING_CONSTRAINT_TYPE
+                        || requestedType == (int)ConstraintType.HINGE_CONSTRAINT_TYPE
+                        || requestedType == (int)ConstraintType.CONETWIST_CONSTRAINT_TYPE
+                        || requestedType == (int)ConstraintType.SLIDER_CONSTRAINT_TYPE)
+                    {
+                        BSPrimLinkable child = pParams[1] as BSPrimLinkable;
+                        if (child != null)
+                        {
+                            DetailLog("{0},BSLinksetConstraint.ChangeLinkType,rootID={1},childID={2},type={3}",
+                                                    LinksetRoot.LocalID, LinksetRoot.LocalID, child.LocalID, requestedType);
+                            m_physicsScene.TaintedObject(child.LocalID, "BSLinksetConstraint.PhysFunctChangeLinkType", delegate()
+                            {
+                                // Pick up all the constraints currently created.
+                                RemoveDependencies(child);
+
+                                BSLinkInfo linkInfo = null;
+                                if (TryGetLinkInfo(child, out linkInfo))
+                                {
+                                    BSLinkInfoConstraint linkInfoC = linkInfo as BSLinkInfoConstraint;
+                                    if (linkInfoC != null)
+                                    {
+                                        linkInfoC.constraintType = (ConstraintType)requestedType;
+                                        ret = (object)true;
+                                        DetailLog("{0},BSLinksetConstraint.ChangeLinkType,link={1},type={2}",
+                                                    linkInfo.member.LocalID, linkInfo.member.LocalID, linkInfoC.constraintType);
+                                    }
+                                    else
+                                    {
+                                        DetailLog("{0},BSLinksetConstraint.ChangeLinkType,linkInfoNotConstraint,childID={1}", LinksetRoot.LocalID, child.LocalID);
+                                    }
+                                }
+                                else
+                                {
+                                    DetailLog("{0},BSLinksetConstraint.ChangeLinkType,noLinkInfoForChild,childID={1}", LinksetRoot.LocalID, child.LocalID);
+                                }
+                                // Cause the whole linkset to be rebuilt in post-taint time.
+                                Refresh(child);
+                            });
+                        }
+                        else
+                        {
+                            DetailLog("{0},BSLinksetConstraint.SetLinkType,childNotBSPrimLinkable", LinksetRoot.LocalID);
+                        }
+                    }
+                    else
+                    {
+                        DetailLog("{0},BSLinksetConstraint.SetLinkType,illegalRequestedType,reqested={1},spring={2}",
+                                        LinksetRoot.LocalID, requestedType, ((int)ConstraintType.D6_SPRING_CONSTRAINT_TYPE));
+                    }
+                }
+                break;
+            // pParams = [ BSPhysObject root, BSPhysObject child ]
+            case ExtendedPhysics.PhysFunctGetLinkType:
+                if (pParams.Length > 0)
+                {
+                    BSPrimLinkable child = pParams[1] as BSPrimLinkable;
+                    if (child != null)
+                    {
+                        BSLinkInfo linkInfo = null;
+                        if (TryGetLinkInfo(child, out linkInfo))
+                        {
+                            BSLinkInfoConstraint linkInfoC = linkInfo as BSLinkInfoConstraint;
+                            if (linkInfoC != null)
+                            {
+                                ret = (object)(int)linkInfoC.constraintType;
+                                DetailLog("{0},BSLinksetConstraint.GetLinkType,link={1},type={2}",
+                                            linkInfo.member.LocalID, linkInfo.member.LocalID, linkInfoC.constraintType);
+
+                            }
+                        }
+                    }
+                }
+                break;
+            // pParams = [ BSPhysObject root, BSPhysObject child, int op, object opParams, int op, object opParams, ... ]
+            case ExtendedPhysics.PhysFunctChangeLinkParams:
+                // There should be two parameters: the childActor and a list of parameters to set
+                if (pParams.Length > 2)
+                {
+                    BSPrimLinkable child = pParams[1] as BSPrimLinkable;
+                    BSLinkInfo baseLinkInfo = null;
+                    if (TryGetLinkInfo(child, out baseLinkInfo))
+                    {
+                        BSLinkInfoConstraint linkInfo = baseLinkInfo as BSLinkInfoConstraint;
+                        if (linkInfo != null)
+                        {
+                            int valueInt;
+                            float valueFloat;
+                            bool valueBool;
+                            OMV.Vector3 valueVector;
+                            OMV.Vector3 valueVector2;
+                            OMV.Quaternion valueQuaternion;
+                            int axisLow, axisHigh;
+
+                            int opIndex = 2;
+                            while (opIndex < pParams.Length)
+                            {
+                                int thisOp = 0;
+                                string errMsg = "";
+                                try
+                                {
+                                    thisOp = (int)pParams[opIndex];
+                                    DetailLog("{0},BSLinksetConstraint.ChangeLinkParams2,op={1},val={2}",
+                                                        linkInfo.member.LocalID, thisOp, pParams[opIndex + 1]);
+                                    switch (thisOp)
+                                    {
+                                        case ExtendedPhysics.PHYS_PARAM_LINK_TYPE:
+                                            valueInt = (int)pParams[opIndex + 1];
+                                            ConstraintType valueType = (ConstraintType)valueInt;
+                                            if (valueType == ConstraintType.BS_FIXED_CONSTRAINT_TYPE
+                                                || valueType == ConstraintType.D6_CONSTRAINT_TYPE
+                                                || valueType == ConstraintType.D6_SPRING_CONSTRAINT_TYPE
+                                                || valueType == ConstraintType.HINGE_CONSTRAINT_TYPE
+                                                || valueType == ConstraintType.CONETWIST_CONSTRAINT_TYPE
+                                                || valueType == ConstraintType.SLIDER_CONSTRAINT_TYPE)
+                                            {
+                                                linkInfo.constraintType = valueType;
+                                            }
+                                            opIndex += 2;
+                                            break;
+                                        case ExtendedPhysics.PHYS_PARAM_FRAMEINA_LOC:
+                                            errMsg = "PHYS_PARAM_FRAMEINA_LOC takes one parameter of type vector";
+                                            valueVector = (OMV.Vector3)pParams[opIndex + 1];
+                                            linkInfo.frameInAloc = valueVector;
+                                            opIndex += 2;
+                                            break;
+                                        case ExtendedPhysics.PHYS_PARAM_FRAMEINA_ROT:
+                                            errMsg = "PHYS_PARAM_FRAMEINA_ROT takes one parameter of type rotation";
+                                            valueQuaternion = (OMV.Quaternion)pParams[opIndex + 1];
+                                            linkInfo.frameInArot = valueQuaternion;
+                                            opIndex += 2;
+                                            break;
+                                        case ExtendedPhysics.PHYS_PARAM_FRAMEINB_LOC:
+                                            errMsg = "PHYS_PARAM_FRAMEINB_LOC takes one parameter of type vector";
+                                            valueVector = (OMV.Vector3)pParams[opIndex + 1];
+                                            linkInfo.frameInBloc = valueVector;
+                                            opIndex += 2;
+                                            break;
+                                        case ExtendedPhysics.PHYS_PARAM_FRAMEINB_ROT:
+                                            errMsg = "PHYS_PARAM_FRAMEINB_ROT takes one parameter of type rotation";
+                                            valueQuaternion = (OMV.Quaternion)pParams[opIndex + 1];
+                                            linkInfo.frameInBrot = valueQuaternion;
+                                            opIndex += 2;
+                                            break;
+                                        case ExtendedPhysics.PHYS_PARAM_LINEAR_LIMIT_LOW:
+                                            errMsg = "PHYS_PARAM_LINEAR_LIMIT_LOW takes one parameter of type vector";
+                                            valueVector = (OMV.Vector3)pParams[opIndex + 1];
+                                            linkInfo.linearLimitLow = valueVector;
+                                            opIndex += 2;
+                                            break;
+                                        case ExtendedPhysics.PHYS_PARAM_LINEAR_LIMIT_HIGH:
+                                            errMsg = "PHYS_PARAM_LINEAR_LIMIT_HIGH takes one parameter of type vector";
+                                            valueVector = (OMV.Vector3)pParams[opIndex + 1];
+                                            linkInfo.linearLimitHigh = valueVector;
+                                            opIndex += 2;
+                                            break;
+                                        case ExtendedPhysics.PHYS_PARAM_ANGULAR_LIMIT_LOW:
+                                            errMsg = "PHYS_PARAM_ANGULAR_LIMIT_LOW takes one parameter of type vector";
+                                            valueVector = (OMV.Vector3)pParams[opIndex + 1];
+                                            linkInfo.angularLimitLow = valueVector;
+                                            opIndex += 2;
+                                            break;
+                                        case ExtendedPhysics.PHYS_PARAM_ANGULAR_LIMIT_HIGH:
+                                            errMsg = "PHYS_PARAM_ANGULAR_LIMIT_HIGH takes one parameter of type vector";
+                                            valueVector = (OMV.Vector3)pParams[opIndex + 1];
+                                            linkInfo.angularLimitHigh = valueVector;
+                                            opIndex += 2;
+                                            break;
+                                        case ExtendedPhysics.PHYS_PARAM_USE_FRAME_OFFSET:
+                                            errMsg = "PHYS_PARAM_USE_FRAME_OFFSET takes one parameter of type integer (bool)";
+                                            valueBool = ((int)pParams[opIndex + 1]) != 0;
+                                            linkInfo.useFrameOffset = valueBool;
+                                            opIndex += 2;
+                                            break;
+                                        case ExtendedPhysics.PHYS_PARAM_ENABLE_TRANSMOTOR:
+                                            errMsg = "PHYS_PARAM_ENABLE_TRANSMOTOR takes one parameter of type integer (bool)";
+                                            valueBool = ((int)pParams[opIndex + 1]) != 0;
+                                            linkInfo.enableTransMotor = valueBool;
+                                            opIndex += 2;
+                                            break;
+                                        case ExtendedPhysics.PHYS_PARAM_TRANSMOTOR_MAXVEL:
+                                            errMsg = "PHYS_PARAM_TRANSMOTOR_MAXVEL takes one parameter of type float";
+                                            valueFloat = (float)pParams[opIndex + 1];
+                                            linkInfo.transMotorMaxVel = valueFloat;
+                                            opIndex += 2;
+                                            break;
+                                        case ExtendedPhysics.PHYS_PARAM_TRANSMOTOR_MAXFORCE:
+                                            errMsg = "PHYS_PARAM_TRANSMOTOR_MAXFORCE takes one parameter of type float";
+                                            valueFloat = (float)pParams[opIndex + 1];
+                                            linkInfo.transMotorMaxForce = valueFloat;
+                                            opIndex += 2;
+                                            break;
+                                        case ExtendedPhysics.PHYS_PARAM_CFM:
+                                            errMsg = "PHYS_PARAM_CFM takes one parameter of type float";
+                                            valueFloat = (float)pParams[opIndex + 1];
+                                            linkInfo.cfm = valueFloat;
+                                            opIndex += 2;
+                                            break;
+                                        case ExtendedPhysics.PHYS_PARAM_ERP:
+                                            errMsg = "PHYS_PARAM_ERP takes one parameter of type float";
+                                            valueFloat = (float)pParams[opIndex + 1];
+                                            linkInfo.erp = valueFloat;
+                                            opIndex += 2;
+                                            break;
+                                        case ExtendedPhysics.PHYS_PARAM_SOLVER_ITERATIONS:
+                                            errMsg = "PHYS_PARAM_SOLVER_ITERATIONS takes one parameter of type float";
+                                            valueFloat = (float)pParams[opIndex + 1];
+                                            linkInfo.solverIterations = valueFloat;
+                                            opIndex += 2;
+                                            break;
+                                        case ExtendedPhysics.PHYS_PARAM_SPRING_AXIS_ENABLE:
+                                            errMsg = "PHYS_PARAM_SPRING_AXIS_ENABLE takes two parameters of types integer and integer (bool)";
+                                            valueInt = (int)pParams[opIndex + 1];
+                                            valueBool = ((int)pParams[opIndex + 2]) != 0;
+                                            GetAxisRange(valueInt, out axisLow, out axisHigh);
+                                            for (int ii = axisLow; ii <= axisHigh; ii++)
+                                                linkInfo.springAxisEnable[ii] = valueBool;
+                                            opIndex += 3;
+                                            break;
+                                        case ExtendedPhysics.PHYS_PARAM_SPRING_DAMPING:
+                                            errMsg = "PHYS_PARAM_SPRING_DAMPING takes two parameters of types integer and float";
+                                            valueInt = (int)pParams[opIndex + 1];
+                                            valueFloat = (float)pParams[opIndex + 2];
+                                            GetAxisRange(valueInt, out axisLow, out axisHigh);
+                                            for (int ii = axisLow; ii <= axisHigh; ii++)
+                                                linkInfo.springDamping[ii] = valueFloat;
+                                            opIndex += 3;
+                                            break;
+                                        case ExtendedPhysics.PHYS_PARAM_SPRING_STIFFNESS:
+                                            errMsg = "PHYS_PARAM_SPRING_STIFFNESS takes two parameters of types integer and float";
+                                            valueInt = (int)pParams[opIndex + 1];
+                                            valueFloat = (float)pParams[opIndex + 2];
+                                            GetAxisRange(valueInt, out axisLow, out axisHigh);
+                                            for (int ii = axisLow; ii <= axisHigh; ii++)
+                                                linkInfo.springStiffness[ii] = valueFloat;
+                                            opIndex += 3;
+                                            break;
+                                        case ExtendedPhysics.PHYS_PARAM_SPRING_EQUILIBRIUM_POINT:
+                                            errMsg = "PHYS_PARAM_SPRING_EQUILIBRIUM_POINT takes two parameters of type vector";
+                                            valueVector = (OMV.Vector3)pParams[opIndex + 1];
+                                            valueVector2 = (OMV.Vector3)pParams[opIndex + 2];
+                                            linkInfo.springLinearEquilibriumPoint = valueVector;
+                                            linkInfo.springAngularEquilibriumPoint = valueVector2;
+                                            opIndex += 3;
+                                            break;
+                                        case ExtendedPhysics.PHYS_PARAM_USE_LINEAR_FRAMEA:
+                                            errMsg = "PHYS_PARAM_USE_LINEAR_FRAMEA takes one parameter of type integer (bool)";
+                                            valueBool = ((int)pParams[opIndex + 1]) != 0;
+                                            linkInfo.useLinearReferenceFrameA = valueBool;
+                                            opIndex += 2;
+                                            break;
+                                        default:
+                                            break;
+                                    }
+                                }
+                                catch (InvalidCastException e)
+                                {
+                                    m_physicsScene.Logger.WarnFormat("{0} value of wrong type in physSetLinksetParams: {1}, err={2}",
+                                                        LogHeader, errMsg, e);
+                                }
+                                catch (Exception e)
+                                {
+                                    m_physicsScene.Logger.WarnFormat("{0} bad parameters in physSetLinksetParams: {1}", LogHeader, e);
+                                }
+                            }
+                        }
+                        // Something changed so a rebuild is in order
+                        Refresh(child);
+                    }
+                }
+            break;
+            default:
+                ret = base.Extension(pFunct, pParams);
+                break;
+        }
+        return ret;
+    }
+
+    // Bullet constraints keep some limit parameters for each linear and angular axis.
+    // Setting same is easier if there is an easy way to see all or types.
+    // This routine returns the array limits for the set of axis.
+    private void GetAxisRange(int rangeSpec, out int low, out int high)
+    {
+        switch (rangeSpec)
+        {
+            case ExtendedPhysics.PHYS_AXIS_LINEAR_ALL:
+                low = 0;
+                high = 2;
+                break;
+            case ExtendedPhysics.PHYS_AXIS_ANGULAR_ALL:
+                low = 3;
+                high = 5;
+                break;
+            case ExtendedPhysics.PHYS_AXIS_ALL:
+                low = 0;
+                high = 5;
+                break;
+            default:
+                low = high = rangeSpec;
+                break;
+        }
+        return;
+    }
+    #endregion // Extension
+
+}
+}