Major renaming of Physics dlls / folders. No functional changes, just renames.

1 files changed, 220 insertions, 0 deletions

diff --git a/OpenSim/Region/PhysicsModules/BulletS/BSActorMoveToTarget.cs b/OpenSim/Region/PhysicsModules/BulletS/BSActorMoveToTarget.cs
new file mode 100755
index 0000000..1145006
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/BSActorMoveToTarget.cs
@@ -0,0 +1,220 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyrightD
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Text;
+
+using OpenSim.Region.Physics.Manager;
+
+using OMV = OpenMetaverse;
+
+namespace OpenSim.Region.Physics.BulletSPlugin
+{
+public class BSActorMoveToTarget : BSActor
+{
+    private BSVMotor m_targetMotor;
+
+    public BSActorMoveToTarget(BSScene physicsScene, BSPhysObject pObj, string actorName)
+        : base(physicsScene, pObj, actorName)
+    {
+        m_targetMotor = null;
+        m_physicsScene.DetailLog("{0},BSActorMoveToTarget,constructor", m_controllingPrim.LocalID);
+    }
+
+    // BSActor.isActive
+    public override bool isActive
+    {
+        // MoveToTarget only works on physical prims
+        get { return Enabled && m_controllingPrim.IsPhysicallyActive; }
+    }
+
+    // Release any connections and resources used by the actor.
+    // BSActor.Dispose()
+    public override void Dispose()
+    {
+        Enabled = false;
+        DeactivateMoveToTarget();
+    }
+
+    // Called when physical parameters (properties set in Bullet) need to be re-applied.
+    // Called at taint-time.
+    // BSActor.Refresh()
+    public override void Refresh()
+    {
+        m_physicsScene.DetailLog("{0},BSActorMoveToTarget,refresh,enabled={1},active={2},target={3},tau={4}",
+            m_controllingPrim.LocalID, Enabled, m_controllingPrim.MoveToTargetActive,
+            m_controllingPrim.MoveToTargetTarget, m_controllingPrim.MoveToTargetTau );
+
+        // If not active any more...
+        if (!m_controllingPrim.MoveToTargetActive)
+        {
+            Enabled = false;
+        }
+
+        if (isActive)
+        {
+            ActivateMoveToTarget();
+        }
+        else
+        {
+            DeactivateMoveToTarget();
+        }
+    }
+
+    // The object's physical representation is being rebuilt so pick up any physical dependencies (constraints, ...).
+    //     Register a prestep action to restore physical requirements before the next simulation step.
+    // Called at taint-time.
+    // BSActor.RemoveDependencies()
+    public override void RemoveDependencies()
+    {
+        // Nothing to do for the moveToTarget since it is all software at pre-step action time.
+    }
+
+    // If a hover motor has not been created, create one and start the hovering.
+    private void ActivateMoveToTarget()
+    {
+        if (m_targetMotor == null)
+        {
+            // We're taking over after this.
+            m_controllingPrim.ZeroMotion(true);
+
+            /* Someday use the PID controller
+            m_targetMotor = new BSPIDVMotor("BSActorMoveToTarget-" + m_controllingPrim.LocalID.ToString());
+            m_targetMotor.TimeScale = m_controllingPrim.MoveToTargetTau;
+            m_targetMotor.Efficiency = 1f;
+             */
+            m_targetMotor = new BSVMotor("BSActorMoveToTarget-" + m_controllingPrim.LocalID.ToString(),
+                                        m_controllingPrim.MoveToTargetTau,  // timeScale
+                                        BSMotor.Infinite,                   // decay time scale
+                                        1f                                  // efficiency
+            );
+            m_targetMotor.PhysicsScene = m_physicsScene; // DEBUG DEBUG so motor will output detail log messages.
+            m_targetMotor.SetTarget(m_controllingPrim.MoveToTargetTarget);
+            m_targetMotor.SetCurrent(m_controllingPrim.RawPosition);
+
+            // m_physicsScene.BeforeStep += Mover;
+            m_physicsScene.BeforeStep += Mover2;
+        }
+        else
+        {
+            // If already allocated, make sure the target and other paramters are current
+            m_targetMotor.SetTarget(m_controllingPrim.MoveToTargetTarget);
+            m_targetMotor.SetCurrent(m_controllingPrim.RawPosition);
+        }
+    }
+
+    private void DeactivateMoveToTarget()
+    {
+        if (m_targetMotor != null)
+        {
+            // m_physicsScene.BeforeStep -= Mover;
+            m_physicsScene.BeforeStep -= Mover2;
+            m_targetMotor = null;
+        }
+    }
+
+    // Origional mover that set the objects position to move to the target.
+    // The problem was that gravity would keep trying to push the object down so
+    //    the overall downward velocity would increase to infinity.
+    // Called just before the simulation step.
+    private void Mover(float timeStep)
+    {
+        // Don't do hovering while the object is selected.
+        if (!isActive)
+            return;
+
+        OMV.Vector3 origPosition = m_controllingPrim.RawPosition;     // DEBUG DEBUG (for printout below)
+
+        // 'movePosition' is where we'd like the prim to be at this moment.
+        OMV.Vector3 movePosition = m_controllingPrim.RawPosition + m_targetMotor.Step(timeStep);
+
+        // If we are very close to our target, turn off the movement motor.
+        if (m_targetMotor.ErrorIsZero())
+        {
+            m_physicsScene.DetailLog("{0},BSActorMoveToTarget.Mover,zeroMovement,movePos={1},pos={2},mass={3}",
+                                    m_controllingPrim.LocalID, movePosition, m_controllingPrim.RawPosition, m_controllingPrim.Mass);
+            m_controllingPrim.ForcePosition = m_targetMotor.TargetValue;
+            m_controllingPrim.ForceVelocity = OMV.Vector3.Zero;
+            // Setting the position does not cause the physics engine to generate a property update. Force it.
+            m_physicsScene.PE.PushUpdate(m_controllingPrim.PhysBody);
+        }
+        else
+        {
+            m_controllingPrim.ForcePosition = movePosition;
+            // Setting the position does not cause the physics engine to generate a property update. Force it.
+            m_physicsScene.PE.PushUpdate(m_controllingPrim.PhysBody);
+        }
+        m_physicsScene.DetailLog("{0},BSActorMoveToTarget.Mover,move,fromPos={1},movePos={2}",
+                                        m_controllingPrim.LocalID, origPosition, movePosition);
+    }
+
+    // Version of mover that applies forces to move the physical object to the target.
+    // Also overcomes gravity so the object doesn't just drop to the ground.
+    // Called just before the simulation step.
+    private void Mover2(float timeStep)
+    {
+        // Don't do hovering while the object is selected.
+        if (!isActive)
+            return;
+
+        OMV.Vector3 origPosition = m_controllingPrim.RawPosition;     // DEBUG DEBUG (for printout below)
+        OMV.Vector3 addedForce = OMV.Vector3.Zero;
+
+        // CorrectionVector is the movement vector required this step
+        OMV.Vector3 correctionVector = m_targetMotor.Step(timeStep, m_controllingPrim.RawPosition);
+
+        // If we are very close to our target, turn off the movement motor.
+        if (m_targetMotor.ErrorIsZero())
+        {
+            m_physicsScene.DetailLog("{0},BSActorMoveToTarget.Mover3,zeroMovement,pos={1},mass={2}",
+                                    m_controllingPrim.LocalID, m_controllingPrim.RawPosition, m_controllingPrim.Mass);
+            m_controllingPrim.ForcePosition = m_targetMotor.TargetValue;
+            m_controllingPrim.ForceVelocity = OMV.Vector3.Zero;
+            // Setting the position does not cause the physics engine to generate a property update. Force it.
+            m_physicsScene.PE.PushUpdate(m_controllingPrim.PhysBody);
+        }
+        else
+        {
+            // First force to move us there -- the motor return a timestep scaled value.
+            addedForce = correctionVector / timeStep;
+            // Remove the existing velocity (only the moveToTarget force counts)
+            addedForce -= m_controllingPrim.RawVelocity;
+            // Overcome gravity. 
+            addedForce -= m_controllingPrim.Gravity;
+
+            // Add enough force to overcome the mass of the object
+            addedForce *= m_controllingPrim.Mass;
+
+            m_controllingPrim.AddForce(addedForce, false /* pushForce */, true /* inTaintTime */);
+        }
+        m_physicsScene.DetailLog("{0},BSActorMoveToTarget.Mover3,move,fromPos={1},addedForce={2}",
+                                        m_controllingPrim.LocalID, origPosition, addedForce);
+    }
+}
+}