Clean up line endings, execute bits, and other bits of errant nonsense from Windows.

1 files changed, 5939 insertions, 5939 deletions

diff --git a/linden/indra/libgcrypt/libgcrypt-1.2.2/m4/libtool.m4 b/linden/indra/libgcrypt/libgcrypt-1.2.2/m4/libtool.m4
index 3b0f753..e4055a0 100755..100644
--- a/linden/indra/libgcrypt/libgcrypt-1.2.2/m4/libtool.m4
+++ b/linden/indra/libgcrypt/libgcrypt-1.2.2/m4/libtool.m4
@@ -1,5939 +1,5939 @@
-# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-

-## Copyright 1996, 1997, 1998, 1999, 2000, 2001

-## Free Software Foundation, Inc.

-## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996

-##

-## This program is free software; you can redistribute it and/or modify

-## it under the terms of the GNU General Public License as published by

-## the Free Software Foundation; either version 2 of the License, or

-## (at your option) any later version.

-##

-## This program is distributed in the hope that it will be useful, but

-## WITHOUT ANY WARRANTY; without even the implied warranty of

-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU

-## General Public License for more details.

-##

-## You should have received a copy of the GNU General Public License

-## along with this program; if not, write to the Free Software

-## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.

-##

-## As a special exception to the GNU General Public License, if you

-## distribute this file as part of a program that contains a

-## configuration script generated by Autoconf, you may include it under

-## the same distribution terms that you use for the rest of that program.

-

-# serial 47 AC_PROG_LIBTOOL

-# Debian $Rev: 961 $

-

-

-# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)

-# -----------------------------------------------------------

-# If this macro is not defined by Autoconf, define it here.

-m4_ifdef([AC_PROVIDE_IFELSE],

-         [],

-         [m4_define([AC_PROVIDE_IFELSE],

-                 [m4_ifdef([AC_PROVIDE_$1],

-                           [$2], [$3])])])

-

-

-# AC_PROG_LIBTOOL

-# ---------------

-AC_DEFUN([AC_PROG_LIBTOOL],

-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl

-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX

-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.

-  AC_PROVIDE_IFELSE([AC_PROG_CXX],

-    [AC_LIBTOOL_CXX],

-    [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX

-  ])])

-dnl And a similar setup for Fortran 77 support

-  AC_PROVIDE_IFELSE([AC_PROG_F77],

-    [AC_LIBTOOL_F77],

-    [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77

-])])

-

-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.

-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run

-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.

-  AC_PROVIDE_IFELSE([AC_PROG_GCJ],

-    [AC_LIBTOOL_GCJ],

-    [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],

-      [AC_LIBTOOL_GCJ],

-      [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],

-        [AC_LIBTOOL_GCJ],

-      [ifdef([AC_PROG_GCJ],

-             [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])

-       ifdef([A][M_PROG_GCJ],

-             [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])

-       ifdef([LT_AC_PROG_GCJ],

-             [define([LT_AC_PROG_GCJ],

-                defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])

-])])# AC_PROG_LIBTOOL

-

-

-# _AC_PROG_LIBTOOL

-# ----------------

-AC_DEFUN([_AC_PROG_LIBTOOL],

-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl

-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl

-AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl

-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl

-

-# This can be used to rebuild libtool when needed

-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"

-

-# Always use our own libtool.

-LIBTOOL='$(SHELL) $(top_builddir)/libtool'

-AC_SUBST(LIBTOOL)dnl

-

-# Prevent multiple expansion

-define([AC_PROG_LIBTOOL], [])

-])# _AC_PROG_LIBTOOL

-

-

-# AC_LIBTOOL_SETUP

-# ----------------

-AC_DEFUN([AC_LIBTOOL_SETUP],

-[AC_PREREQ(2.50)dnl

-AC_REQUIRE([AC_ENABLE_SHARED])dnl

-AC_REQUIRE([AC_ENABLE_STATIC])dnl

-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl

-AC_REQUIRE([AC_CANONICAL_HOST])dnl

-AC_REQUIRE([AC_CANONICAL_BUILD])dnl

-AC_REQUIRE([AC_PROG_CC])dnl

-AC_REQUIRE([AC_PROG_LD])dnl

-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl

-AC_REQUIRE([AC_PROG_NM])dnl

-

-AC_REQUIRE([AC_PROG_LN_S])dnl

-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl

-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!

-AC_REQUIRE([AC_OBJEXT])dnl

-AC_REQUIRE([AC_EXEEXT])dnl

-dnl

-

-AC_LIBTOOL_SYS_MAX_CMD_LEN

-AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE

-AC_LIBTOOL_OBJDIR

-

-AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl

-_LT_AC_PROG_ECHO_BACKSLASH

-

-case $host_os in

-aix3*)

-  # AIX sometimes has problems with the GCC collect2 program.  For some

-  # reason, if we set the COLLECT_NAMES environment variable, the problems

-  # vanish in a puff of smoke.

-  if test "X${COLLECT_NAMES+set}" != Xset; then

-    COLLECT_NAMES=

-    export COLLECT_NAMES

-  fi

-  ;;

-esac

-

-# Sed substitution that helps us do robust quoting.  It backslashifies

-# metacharacters that are still active within double-quoted strings.

-Xsed='sed -e s/^X//'

-[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']

-

-# Same as above, but do not quote variable references.

-[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']

-

-# Sed substitution to delay expansion of an escaped shell variable in a

-# double_quote_subst'ed string.

-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'

-

-# Sed substitution to avoid accidental globbing in evaled expressions

-no_glob_subst='s/\*/\\\*/g'

-

-# Constants:

-rm="rm -f"

-

-# Global variables:

-default_ofile=libtool

-can_build_shared=yes

-

-# All known linkers require a `.a' archive for static linking (except M$VC,

-# which needs '.lib').

-libext=a

-ltmain="$ac_aux_dir/ltmain.sh"

-ofile="$default_ofile"

-with_gnu_ld="$lt_cv_prog_gnu_ld"

-

-AC_CHECK_TOOL(AR, ar, false)

-AC_CHECK_TOOL(RANLIB, ranlib, :)

-AC_CHECK_TOOL(STRIP, strip, :)

-

-old_CC="$CC"

-old_CFLAGS="$CFLAGS"

-

-# Set sane defaults for various variables

-test -z "$AR" && AR=ar

-test -z "$AR_FLAGS" && AR_FLAGS=cru

-test -z "$AS" && AS=as

-test -z "$CC" && CC=cc

-test -z "$LTCC" && LTCC=$CC

-test -z "$DLLTOOL" && DLLTOOL=dlltool

-test -z "$LD" && LD=ld

-test -z "$LN_S" && LN_S="ln -s"

-test -z "$MAGIC_CMD" && MAGIC_CMD=file

-test -z "$NM" && NM=nm

-test -z "$SED" && SED=sed

-test -z "$OBJDUMP" && OBJDUMP=objdump

-test -z "$RANLIB" && RANLIB=:

-test -z "$STRIP" && STRIP=:

-test -z "$ac_objext" && ac_objext=o

-

-# Determine commands to create old-style static archives.

-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'

-old_postinstall_cmds='chmod 644 $oldlib'

-old_postuninstall_cmds=

-

-if test -n "$RANLIB"; then

-  case $host_os in

-  openbsd*)

-    old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"

-    ;;

-  *)

-    old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"

-    ;;

-  esac

-  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"

-fi

-

-# Only perform the check for file, if the check method requires it

-case $deplibs_check_method in

-file_magic*)

-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then

-    AC_PATH_MAGIC

-  fi

-  ;;

-esac

-

-AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)

-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],

-enable_win32_dll=yes, enable_win32_dll=no)

-

-AC_ARG_ENABLE([libtool-lock],

-    [AC_HELP_STRING([--disable-libtool-lock],

-        [avoid locking (might break parallel builds)])])

-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes

-

-AC_ARG_WITH([pic],

-    [AC_HELP_STRING([--with-pic],

-        [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],

-    [pic_mode="$withval"],

-    [pic_mode=default])

-test -z "$pic_mode" && pic_mode=default

-

-# Use C for the default configuration in the libtool script

-tagname=

-AC_LIBTOOL_LANG_C_CONFIG

-_LT_AC_TAGCONFIG

-])# AC_LIBTOOL_SETUP

-

-

-# _LT_AC_SYS_COMPILER

-# -------------------

-AC_DEFUN([_LT_AC_SYS_COMPILER],

-[AC_REQUIRE([AC_PROG_CC])dnl

-

-# If no C compiler was specified, use CC.

-LTCC=${LTCC-"$CC"}

-

-# Allow CC to be a program name with arguments.

-compiler=$CC

-])# _LT_AC_SYS_COMPILER

-

-

-# _LT_AC_SYS_LIBPATH_AIX

-# ----------------------

-# Links a minimal program and checks the executable

-# for the system default hardcoded library path. In most cases,

-# this is /usr/lib:/lib, but when the MPI compilers are used

-# the location of the communication and MPI libs are included too.

-# If we don't find anything, use the default library path according

-# to the aix ld manual.

-AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],

-[AC_LINK_IFELSE(AC_LANG_PROGRAM,[

-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }

-}'`

-# Check for a 64-bit object if we didn't find anything.

-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }

-}'`; fi],[])

-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi

-])# _LT_AC_SYS_LIBPATH_AIX

-

-

-# _LT_AC_SHELL_INIT(ARG)

-# ----------------------

-AC_DEFUN([_LT_AC_SHELL_INIT],

-[ifdef([AC_DIVERSION_NOTICE],

-             [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],

-         [AC_DIVERT_PUSH(NOTICE)])

-$1

-AC_DIVERT_POP

-])# _LT_AC_SHELL_INIT

-

-

-# _LT_AC_PROG_ECHO_BACKSLASH

-# --------------------------

-# Add some code to the start of the generated configure script which

-# will find an echo command which doesn't interpret backslashes.

-AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],

-[_LT_AC_SHELL_INIT([

-# Check that we are running under the correct shell.

-SHELL=${CONFIG_SHELL-/bin/sh}

-

-case X$ECHO in

-X*--fallback-echo)

-  # Remove one level of quotation (which was required for Make).

-  ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`

-  ;;

-esac

-

-echo=${ECHO-echo}

-if test "X[$]1" = X--no-reexec; then

-  # Discard the --no-reexec flag, and continue.

-  shift

-elif test "X[$]1" = X--fallback-echo; then

-  # Avoid inline document here, it may be left over

-  :

-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then

-  # Yippee, $echo works!

-  :

-else

-  # Restart under the correct shell.

-  exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}

-fi

-

-if test "X[$]1" = X--fallback-echo; then

-  # used as fallback echo

-  shift

-  cat <<EOF

-[$]*

-EOF

-  exit 0

-fi

-

-# The HP-UX ksh and POSIX shell print the target directory to stdout

-# if CDPATH is set.

-if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi

-

-if test -z "$ECHO"; then

-if test "X${echo_test_string+set}" != Xset; then

-# find a string as large as possible, as long as the shell can cope with it

-  for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do

-    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...

-    if (echo_test_string="`eval $cmd`") 2>/dev/null &&

-       echo_test_string="`eval $cmd`" &&

-       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null

-    then

-      break

-    fi

-  done

-fi

-

-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&

-   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&

-   test "X$echo_testing_string" = "X$echo_test_string"; then

-  :

-else

-  # The Solaris, AIX, and Digital Unix default echo programs unquote

-  # backslashes.  This makes it impossible to quote backslashes using

-  #   echo "$something" | sed 's/\\/\\\\/g'

-  #

-  # So, first we look for a working echo in the user's PATH.

-

-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR

-  for dir in $PATH /usr/ucb; do

-    IFS="$lt_save_ifs"

-    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&

-       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&

-       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&

-       test "X$echo_testing_string" = "X$echo_test_string"; then

-      echo="$dir/echo"

-      break

-    fi

-  done

-  IFS="$lt_save_ifs"

-

-  if test "X$echo" = Xecho; then

-    # We didn't find a better echo, so look for alternatives.

-    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&

-       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&

-       test "X$echo_testing_string" = "X$echo_test_string"; then

-      # This shell has a builtin print -r that does the trick.

-      echo='print -r'

-    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&

-         test "X$CONFIG_SHELL" != X/bin/ksh; then

-      # If we have ksh, try running configure again with it.

-      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}

-      export ORIGINAL_CONFIG_SHELL

-      CONFIG_SHELL=/bin/ksh

-      export CONFIG_SHELL

-      exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}

-    else

-      # Try using printf.

-      echo='printf %s\n'

-      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&

-         echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&

-         test "X$echo_testing_string" = "X$echo_test_string"; then

-        # Cool, printf works

-        :

-      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&

-           test "X$echo_testing_string" = 'X\t' &&

-           echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&

-           test "X$echo_testing_string" = "X$echo_test_string"; then

-        CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL

-        export CONFIG_SHELL

-        SHELL="$CONFIG_SHELL"

-        export SHELL

-        echo="$CONFIG_SHELL [$]0 --fallback-echo"

-      elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&

-           test "X$echo_testing_string" = 'X\t' &&

-           echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&

-           test "X$echo_testing_string" = "X$echo_test_string"; then

-        echo="$CONFIG_SHELL [$]0 --fallback-echo"

-      else

-        # maybe with a smaller string...

-        prev=:

-

-        for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do

-          if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null

-          then

-            break

-          fi

-          prev="$cmd"

-        done

-

-        if test "$prev" != 'sed 50q "[$]0"'; then

-          echo_test_string=`eval $prev`

-          export echo_test_string

-          exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}

-        else

-          # Oops.  We lost completely, so just stick with echo.

-          echo=echo

-        fi

-      fi

-    fi

-  fi

-fi

-fi

-

-# Copy echo and quote the copy suitably for passing to libtool from

-# the Makefile, instead of quoting the original, which is used later.

-ECHO=$echo

-if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then

-   ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"

-fi

-

-AC_SUBST(ECHO)

-])])# _LT_AC_PROG_ECHO_BACKSLASH

-

-

-# _LT_AC_LOCK

-# -----------

-AC_DEFUN([_LT_AC_LOCK],

-[AC_ARG_ENABLE([libtool-lock],

-    [AC_HELP_STRING([--disable-libtool-lock],

-        [avoid locking (might break parallel builds)])])

-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes

-

-# Some flags need to be propagated to the compiler or linker for good

-# libtool support.

-case $host in

-ia64-*-hpux*)

-  # Find out which ABI we are using.

-  echo 'int i;' > conftest.$ac_ext

-  if AC_TRY_EVAL(ac_compile); then

-    case `/usr/bin/file conftest.$ac_objext` in

-    *ELF-32*)

-      HPUX_IA64_MODE="32"

-      ;;

-    *ELF-64*)

-      HPUX_IA64_MODE="64"

-      ;;

-    esac

-  fi

-  rm -rf conftest*

-  ;;

-*-*-irix6*)

-  # Find out which ABI we are using.

-  echo '[#]line __oline__ "configure"' > conftest.$ac_ext

-  if AC_TRY_EVAL(ac_compile); then

-   if test "$lt_cv_prog_gnu_ld" = yes; then

-    case `/usr/bin/file conftest.$ac_objext` in

-    *32-bit*)

-      LD="${LD-ld} -melf32bsmip"

-      ;;

-    *N32*)

-      LD="${LD-ld} -melf32bmipn32"

-      ;;

-    *64-bit*)

-      LD="${LD-ld} -melf64bmip"

-      ;;

-    esac

-   else

-    case `/usr/bin/file conftest.$ac_objext` in

-    *32-bit*)

-      LD="${LD-ld} -32"

-      ;;

-    *N32*)

-      LD="${LD-ld} -n32"

-      ;;

-    *64-bit*)

-      LD="${LD-ld} -64"

-      ;;

-    esac

-   fi

-  fi

-  rm -rf conftest*

-  ;;

-

-x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)

-  # Find out which ABI we are using.

-  echo 'int i;' > conftest.$ac_ext

-  if AC_TRY_EVAL(ac_compile); then

-    case "`/usr/bin/file conftest.o`" in

-    *32-bit*)

-      case $host in

-        x86_64-*linux*)

-          LD="${LD-ld} -m elf_i386"

-          ;;

-        ppc64-*linux*|powerpc64-*linux*)

-          LD="${LD-ld} -m elf32ppclinux"

-          ;;

-        s390x-*linux*)

-          LD="${LD-ld} -m elf_s390"

-          ;;

-        sparc64-*linux*)

-          LD="${LD-ld} -m elf32_sparc"

-          ;;

-      esac

-      ;;

-    *64-bit*)

-      case $host in

-        x86_64-*linux*)

-          LD="${LD-ld} -m elf_x86_64"

-          ;;

-        ppc*-*linux*|powerpc*-*linux*)

-          LD="${LD-ld} -m elf64ppc"

-          ;;

-        s390*-*linux*)

-          LD="${LD-ld} -m elf64_s390"

-          ;;

-        sparc*-*linux*)

-          LD="${LD-ld} -m elf64_sparc"

-          ;;

-      esac

-      ;;

-    esac

-  fi

-  rm -rf conftest*

-  ;;

-

-*-*-sco3.2v5*)

-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.

-  SAVE_CFLAGS="$CFLAGS"

-  CFLAGS="$CFLAGS -belf"

-  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,

-    [AC_LANG_PUSH(C)

-     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])

-     AC_LANG_POP])

-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then

-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf

-    CFLAGS="$SAVE_CFLAGS"

-  fi

-  ;;

-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],

-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)

-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)

-  AC_CHECK_TOOL(AS, as, false)

-  AC_CHECK_TOOL(OBJDUMP, objdump, false)

-  ;;

-  ])

-esac

-

-need_locks="$enable_libtool_lock"

-

-])# _LT_AC_LOCK

-

-

-# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,

-#               [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])

-# ----------------------------------------------------------------

-# Check whether the given compiler option works

-AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],

-[AC_REQUIRE([LT_AC_PROG_SED])

-AC_CACHE_CHECK([$1], [$2],

-  [$2=no

-  ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])

-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext

-   lt_compiler_flag="$3"

-   # Insert the option either (1) after the last *FLAGS variable, or

-   # (2) before a word containing "conftest.", or (3) at the end.

-   # Note that $ac_compile itself does not contain backslashes and begins

-   # with a dollar sign (not a hyphen), so the echo should work correctly.

-   # The option is referenced via a variable to avoid confusing sed.

-   lt_compile=`echo "$ac_compile" | $SED \

-   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \

-   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \

-   -e 's:$: $lt_compiler_flag:'`

-   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)

-   (eval "$lt_compile" 2>conftest.err)

-   ac_status=$?

-   cat conftest.err >&AS_MESSAGE_LOG_FD

-   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD

-   if (exit $ac_status) && test -s "$ac_outfile"; then

-     # The compiler can only warn and ignore the option if not recognized

-     # So say no if there are warnings

-     if test ! -s conftest.err; then

-       $2=yes

-     fi

-   fi

-   $rm conftest*

-])

-

-if test x"[$]$2" = xyes; then

-    ifelse([$5], , :, [$5])

-else

-    ifelse([$6], , :, [$6])

-fi

-])# AC_LIBTOOL_COMPILER_OPTION

-

-

-# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,

-#                          [ACTION-SUCCESS], [ACTION-FAILURE])

-# ------------------------------------------------------------

-# Check whether the given compiler option works

-AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],

-[AC_CACHE_CHECK([$1], [$2],

-  [$2=no

-   save_LDFLAGS="$LDFLAGS"

-   LDFLAGS="$LDFLAGS $3"

-   printf "$lt_simple_link_test_code" > conftest.$ac_ext

-   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then

-     # The compiler can only warn and ignore the option if not recognized

-     # So say no if there are warnings

-     if test -s conftest.err; then

-       # Append any errors to the config.log.

-       cat conftest.err 1>&AS_MESSAGE_LOG_FD

-     else

-       $2=yes

-     fi

-   fi

-   $rm conftest*

-   LDFLAGS="$save_LDFLAGS"

-])

-

-if test x"[$]$2" = xyes; then

-    ifelse([$4], , :, [$4])

-else

-    ifelse([$5], , :, [$5])

-fi

-])# AC_LIBTOOL_LINKER_OPTION

-

-

-# AC_LIBTOOL_SYS_MAX_CMD_LEN

-# --------------------------

-AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],

-[# find the maximum length of command line arguments

-AC_MSG_CHECKING([the maximum length of command line arguments])

-AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl

-  i=0

-  teststring="ABCD"

-

-  case $build_os in

-  msdosdjgpp*)

-    # On DJGPP, this test can blow up pretty badly due to problems in libc

-    # (any single argument exceeding 2000 bytes causes a buffer overrun

-    # during glob expansion).  Even if it were fixed, the result of this

-    # check would be larger than it should be.

-    lt_cv_sys_max_cmd_len=12288;    # 12K is about right

-    ;;

-

-  gnu*)

-    # Under GNU Hurd, this test is not required because there is

-    # no limit to the length of command line arguments.

-    # Libtool will interpret -1 as no limit whatsoever

-    lt_cv_sys_max_cmd_len=-1;

-    ;;

-

-  cygwin* | mingw*)

-    # On Win9x/ME, this test blows up -- it succeeds, but takes

-    # about 5 minutes as the teststring grows exponentially.

-    # Worse, since 9x/ME are not pre-emptively multitasking,

-    # you end up with a "frozen" computer, even though with patience

-    # the test eventually succeeds (with a max line length of 256k).

-    # Instead, let's just punt: use the minimum linelength reported by

-    # all of the supported platforms: 8192 (on NT/2K/XP).

-    lt_cv_sys_max_cmd_len=8192;

-    ;;

-

-  amigaos*)

-    # On AmigaOS with pdksh, this test takes hours, literally.

-    # So we just punt and use a minimum line length of 8192.

-    lt_cv_sys_max_cmd_len=8192;

-    ;;

-

- *)

-    # If test is not a shell built-in, we'll probably end up computing a

-    # maximum length that is only half of the actual maximum length, but

-    # we can't tell.

-    while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \

-               = "XX$teststring") >/dev/null 2>&1 &&

-            new_result=`expr "X$teststring" : ".*" 2>&1` &&

-            lt_cv_sys_max_cmd_len=$new_result &&

-            test $i != 17 # 1/2 MB should be enough

-    do

-      i=`expr $i + 1`

-      teststring=$teststring$teststring

-    done

-    teststring=

-    # Add a significant safety factor because C++ compilers can tack on massive

-    # amounts of additional arguments before passing them to the linker.

-    # It appears as though 1/2 is a usable value.

-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`

-    ;;

-  esac

-])

-if test -n $lt_cv_sys_max_cmd_len ; then

-  AC_MSG_RESULT($lt_cv_sys_max_cmd_len)

-else

-  AC_MSG_RESULT(none)

-fi

-])# AC_LIBTOOL_SYS_MAX_CMD_LEN

-

-

-# _LT_AC_CHECK_DLFCN

-# --------------------

-AC_DEFUN([_LT_AC_CHECK_DLFCN],

-[AC_CHECK_HEADERS(dlfcn.h)dnl

-])# _LT_AC_CHECK_DLFCN

-

-

-# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,

-#                           ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)

-# ------------------------------------------------------------------

-AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],

-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl

-if test "$cross_compiling" = yes; then :

-  [$4]

-else

-  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2

-  lt_status=$lt_dlunknown

-  cat > conftest.$ac_ext <<EOF

-[#line __oline__ "configure"

-#include "confdefs.h"

-

-#if HAVE_DLFCN_H

-#include <dlfcn.h>

-#endif

-

-#include <stdio.h>

-

-#ifdef RTLD_GLOBAL

-#  define LT_DLGLOBAL           RTLD_GLOBAL

-#else

-#  ifdef DL_GLOBAL

-#    define LT_DLGLOBAL         DL_GLOBAL

-#  else

-#    define LT_DLGLOBAL         0

-#  endif

-#endif

-

-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we

-   find out it does not work in some platform. */

-#ifndef LT_DLLAZY_OR_NOW

-#  ifdef RTLD_LAZY

-#    define LT_DLLAZY_OR_NOW            RTLD_LAZY

-#  else

-#    ifdef DL_LAZY

-#      define LT_DLLAZY_OR_NOW          DL_LAZY

-#    else

-#      ifdef RTLD_NOW

-#        define LT_DLLAZY_OR_NOW        RTLD_NOW

-#      else

-#        ifdef DL_NOW

-#          define LT_DLLAZY_OR_NOW      DL_NOW

-#        else

-#          define LT_DLLAZY_OR_NOW      0

-#        endif

-#      endif

-#    endif

-#  endif

-#endif

-

-#ifdef __cplusplus

-extern "C" void exit (int);

-#endif

-

-void fnord() { int i=42;}

-int main ()

-{

-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);

-  int status = $lt_dlunknown;

-

-  if (self)

-    {

-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;

-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;

-      /* dlclose (self); */

-    }

-

-    exit (status);

-}]

-EOF

-  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then

-    (./conftest; exit; ) 2>/dev/null

-    lt_status=$?

-    case x$lt_status in

-      x$lt_dlno_uscore) $1 ;;

-      x$lt_dlneed_uscore) $2 ;;

-      x$lt_unknown|x*) $3 ;;

-    esac

-  else :

-    # compilation failed

-    $3

-  fi

-fi

-rm -fr conftest*

-])# _LT_AC_TRY_DLOPEN_SELF

-

-

-# AC_LIBTOOL_DLOPEN_SELF

-# -------------------

-AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],

-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl

-if test "x$enable_dlopen" != xyes; then

-  enable_dlopen=unknown

-  enable_dlopen_self=unknown

-  enable_dlopen_self_static=unknown

-else

-  lt_cv_dlopen=no

-  lt_cv_dlopen_libs=

-

-  case $host_os in

-  beos*)

-    lt_cv_dlopen="load_add_on"

-    lt_cv_dlopen_libs=

-    lt_cv_dlopen_self=yes

-    ;;

-

-  mingw* | pw32*)

-    lt_cv_dlopen="LoadLibrary"

-    lt_cv_dlopen_libs=

-   ;;

-

-  cygwin*)

-    lt_cv_dlopen="dlopen"

-    lt_cv_dlopen_libs=

-   ;;

-

-  darwin*)

-  # if libdl is installed we need to link against it

-    AC_CHECK_LIB([dl], [dlopen],

-                [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[

-    lt_cv_dlopen="dyld"

-    lt_cv_dlopen_libs=

-    lt_cv_dlopen_self=yes

-    ])

-   ;;

-

-  *)

-    AC_CHECK_FUNC([shl_load],

-          [lt_cv_dlopen="shl_load"],

-      [AC_CHECK_LIB([dld], [shl_load],

-            [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],

-        [AC_CHECK_FUNC([dlopen],

-              [lt_cv_dlopen="dlopen"],

-          [AC_CHECK_LIB([dl], [dlopen],

-                [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],

-            [AC_CHECK_LIB([svld], [dlopen],

-                  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],

-              [AC_CHECK_LIB([dld], [dld_link],

-                    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])

-              ])

-            ])

-          ])

-        ])

-      ])

-    ;;

-  esac

-

-  if test "x$lt_cv_dlopen" != xno; then

-    enable_dlopen=yes

-  else

-    enable_dlopen=no

-  fi

-

-  case $lt_cv_dlopen in

-  dlopen)

-    save_CPPFLAGS="$CPPFLAGS"

-    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"

-

-    save_LDFLAGS="$LDFLAGS"

-    eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"

-

-    save_LIBS="$LIBS"

-    LIBS="$lt_cv_dlopen_libs $LIBS"

-

-    AC_CACHE_CHECK([whether a program can dlopen itself],

-          lt_cv_dlopen_self, [dnl

-          _LT_AC_TRY_DLOPEN_SELF(

-            lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,

-            lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)

-    ])

-

-    if test "x$lt_cv_dlopen_self" = xyes; then

-      LDFLAGS="$LDFLAGS $link_static_flag"

-      AC_CACHE_CHECK([whether a statically linked program can dlopen itself],

-          lt_cv_dlopen_self_static, [dnl

-          _LT_AC_TRY_DLOPEN_SELF(

-            lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,

-            lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)

-      ])

-    fi

-

-    CPPFLAGS="$save_CPPFLAGS"

-    LDFLAGS="$save_LDFLAGS"

-    LIBS="$save_LIBS"

-    ;;

-  esac

-

-  case $lt_cv_dlopen_self in

-  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;

-  *) enable_dlopen_self=unknown ;;

-  esac

-

-  case $lt_cv_dlopen_self_static in

-  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;

-  *) enable_dlopen_self_static=unknown ;;

-  esac

-fi

-])# AC_LIBTOOL_DLOPEN_SELF

-

-

-# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])

-# ---------------------------------

-# Check to see if options -c and -o are simultaneously supported by compiler

-AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],

-[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl

-AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],

-  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],

-  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no

-   $rm -r conftest 2>/dev/null

-   mkdir conftest

-   cd conftest

-   mkdir out

-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext

-

-   lt_compiler_flag="-o out/conftest2.$ac_objext"

-   # Insert the option either (1) after the last *FLAGS variable, or

-   # (2) before a word containing "conftest.", or (3) at the end.

-   # Note that $ac_compile itself does not contain backslashes and begins

-   # with a dollar sign (not a hyphen), so the echo should work correctly.

-   lt_compile=`echo "$ac_compile" | $SED \

-   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \

-   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \

-   -e 's:$: $lt_compiler_flag:'`

-   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)

-   (eval "$lt_compile" 2>out/conftest.err)

-   ac_status=$?

-   cat out/conftest.err >&AS_MESSAGE_LOG_FD

-   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD

-   if (exit $ac_status) && test -s out/conftest2.$ac_objext

-   then

-     # The compiler can only warn and ignore the option if not recognized

-     # So say no if there are warnings

-     if test ! -s out/conftest.err; then

-       _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes

-     fi

-   fi

-   chmod u+w .

-   $rm conftest*

-   # SGI C++ compiler will create directory out/ii_files/ for

-   # template instantiation

-   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files

-   $rm out/* && rmdir out

-   cd ..

-   rmdir conftest

-   $rm conftest*

-])

-])# AC_LIBTOOL_PROG_CC_C_O

-

-

-# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])

-# -----------------------------------------

-# Check to see if we can do hard links to lock some files if needed

-AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],

-[AC_REQUIRE([_LT_AC_LOCK])dnl

-

-hard_links="nottested"

-if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then

-  # do not overwrite the value of need_locks provided by the user

-  AC_MSG_CHECKING([if we can lock with hard links])

-  hard_links=yes

-  $rm conftest*

-  ln conftest.a conftest.b 2>/dev/null && hard_links=no

-  touch conftest.a

-  ln conftest.a conftest.b 2>&5 || hard_links=no

-  ln conftest.a conftest.b 2>/dev/null && hard_links=no

-  AC_MSG_RESULT([$hard_links])

-  if test "$hard_links" = no; then

-    AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])

-    need_locks=warn

-  fi

-else

-  need_locks=no

-fi

-])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS

-

-

-# AC_LIBTOOL_OBJDIR

-# -----------------

-AC_DEFUN([AC_LIBTOOL_OBJDIR],

-[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],

-[rm -f .libs 2>/dev/null

-mkdir .libs 2>/dev/null

-if test -d .libs; then

-  lt_cv_objdir=.libs

-else

-  # MS-DOS does not allow filenames that begin with a dot.

-  lt_cv_objdir=_libs

-fi

-rmdir .libs 2>/dev/null])

-objdir=$lt_cv_objdir

-])# AC_LIBTOOL_OBJDIR

-

-

-# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])

-# ----------------------------------------------

-# Check hardcoding attributes.

-AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],

-[AC_MSG_CHECKING([how to hardcode library paths into programs])

-_LT_AC_TAGVAR(hardcode_action, $1)=

-if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \

-   test -n "$_LT_AC_TAGVAR(runpath_var $1)" || \

-   test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)"="Xyes" ; then

-

-  # We can hardcode non-existant directories.

-  if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&

-     # If the only mechanism to avoid hardcoding is shlibpath_var, we

-     # have to relink, otherwise we might link with an installed library

-     # when we should be linking with a yet-to-be-installed one

-     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&

-     test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then

-    # Linking always hardcodes the temporary library directory.

-    _LT_AC_TAGVAR(hardcode_action, $1)=relink

-  else

-    # We can link without hardcoding, and we can hardcode nonexisting dirs.

-    _LT_AC_TAGVAR(hardcode_action, $1)=immediate

-  fi

-else

-  # We cannot hardcode anything, or else we can only hardcode existing

-  # directories.

-  _LT_AC_TAGVAR(hardcode_action, $1)=unsupported

-fi

-AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])

-

-if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then

-  # Fast installation is not supported

-  enable_fast_install=no

-elif test "$shlibpath_overrides_runpath" = yes ||

-     test "$enable_shared" = no; then

-  # Fast installation is not necessary

-  enable_fast_install=needless

-fi

-])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH

-

-

-# AC_LIBTOOL_SYS_LIB_STRIP

-# ------------------------

-AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],

-[striplib=

-old_striplib=

-AC_MSG_CHECKING([whether stripping libraries is possible])

-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then

-  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"

-  test -z "$striplib" && striplib="$STRIP --strip-unneeded"

-  AC_MSG_RESULT([yes])

-else

-# FIXME - insert some real tests, host_os isn't really good enough

-  case $host_os in

-   darwin*)

-       if test -n "$STRIP" ; then

-         striplib="$STRIP -x"

-         AC_MSG_RESULT([yes])

-       else

-  AC_MSG_RESULT([no])

-fi

-       ;;

-   *)

-  AC_MSG_RESULT([no])

-    ;;

-  esac

-fi

-])# AC_LIBTOOL_SYS_LIB_STRIP

-

-

-# AC_LIBTOOL_SYS_DYNAMIC_LINKER

-# -----------------------------

-# PORTME Fill in your ld.so characteristics

-AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],

-[AC_MSG_CHECKING([dynamic linker characteristics])

-library_names_spec=

-libname_spec='lib$name'

-soname_spec=

-shrext_cmds=".so"

-postinstall_cmds=

-postuninstall_cmds=

-finish_cmds=

-finish_eval=

-shlibpath_var=

-shlibpath_overrides_runpath=unknown

-version_type=none

-dynamic_linker="$host_os ld.so"

-sys_lib_dlsearch_path_spec="/lib /usr/lib"

-if test "$GCC" = yes; then

-  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`

-  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then

-    # if the path contains ";" then we assume it to be the separator

-    # otherwise default to the standard path separator (i.e. ":") - it is

-    # assumed that no part of a normal pathname contains ";" but that should

-    # okay in the real world where ";" in dirpaths is itself problematic.

-    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`

-  else

-    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`

-  fi

-else

-  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"

-fi

-need_lib_prefix=unknown

-hardcode_into_libs=no

-

-# when you set need_version to no, make sure it does not cause -set_version

-# flags to be left without arguments

-need_version=unknown

-

-case $host_os in

-aix3*)

-  version_type=linux

-  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'

-  shlibpath_var=LIBPATH

-

-  # AIX 3 has no versioning support, so we append a major version to the name.

-  soname_spec='${libname}${release}${shared_ext}$major'

-  ;;

-

-aix4* | aix5*)

-  version_type=linux

-  need_lib_prefix=no

-  need_version=no

-  hardcode_into_libs=yes

-  if test "$host_cpu" = ia64; then

-    # AIX 5 supports IA64

-    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'

-    shlibpath_var=LD_LIBRARY_PATH

-  else

-    # With GCC up to 2.95.x, collect2 would create an import file

-    # for dependence libraries.  The import file would start with

-    # the line `#! .'.  This would cause the generated library to

-    # depend on `.', always an invalid library.  This was fixed in

-    # development snapshots of GCC prior to 3.0.

-    case $host_os in

-      aix4 | aix4.[[01]] | aix4.[[01]].*)

-      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'

-           echo ' yes '

-           echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then

-        :

-      else

-        can_build_shared=no

-      fi

-      ;;

-    esac

-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct

-    # soname into executable. Probably we can add versioning support to

-    # collect2, so additional links can be useful in future.

-    if test "$aix_use_runtimelinking" = yes; then

-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so

-      # instead of lib<name>.a to let people know that these are not

-      # typical AIX shared libraries.

-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'

-    else

-      # We preserve .a as extension for shared libraries through AIX4.2

-      # and later when we are not doing run time linking.

-      library_names_spec='${libname}${release}.a $libname.a'

-      soname_spec='${libname}${release}${shared_ext}$major'

-    fi

-    shlibpath_var=LIBPATH

-  fi

-  ;;

-

-amigaos*)

-  library_names_spec='$libname.ixlibrary $libname.a'

-  # Create ${libname}_ixlibrary.a entries in /sys/libs.

-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'

-  ;;

-

-beos*)

-  library_names_spec='${libname}${shared_ext}'

-  dynamic_linker="$host_os ld.so"

-  shlibpath_var=LIBRARY_PATH

-  ;;

-

-bsdi4*)

-  version_type=linux

-  need_version=no

-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'

-  soname_spec='${libname}${release}${shared_ext}$major'

-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'

-  shlibpath_var=LD_LIBRARY_PATH

-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"

-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"

-  # the default ld.so.conf also contains /usr/contrib/lib and

-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow

-  # libtool to hard-code these into programs

-  ;;

-

-cygwin* | mingw* | pw32*)

-  version_type=windows

-  shrext_cmds=".dll"

-  need_version=no

-  need_lib_prefix=no

-

-  case $GCC,$host_os in

-  yes,cygwin* | yes,mingw* | yes,pw32*)

-    library_names_spec='$libname.dll.a'

-    # DLL is installed to $(libdir)/../bin by postinstall_cmds

-    postinstall_cmds='base_file=`basename \${file}`~

-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~

-      dldir=$destdir/`dirname \$dlpath`~

-      test -d \$dldir || mkdir -p \$dldir~

-      $install_prog $dir/$dlname \$dldir/$dlname'

-    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~

-      dlpath=$dir/\$dldll~

-       $rm \$dlpath'

-    shlibpath_overrides_runpath=yes

-

-    case $host_os in

-    cygwin*)

-      # Cygwin DLLs use 'cyg' prefix rather than 'lib'

-      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'

-      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"

-      ;;

-    mingw*)

-      # MinGW DLLs use traditional 'lib' prefix

-      soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'

-      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`

-      if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then

-        # It is most probably a Windows format PATH printed by

-        # mingw gcc, but we are running on Cygwin. Gcc prints its search

-        # path with ; separators, and with drive letters. We can handle the

-        # drive letters (cygwin fileutils understands them), so leave them,

-        # especially as we might pass files found there to a mingw objdump,

-        # which wouldn't understand a cygwinified path. Ahh.

-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`

-      else

-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`

-      fi

-      ;;

-    pw32*)

-      # pw32 DLLs use 'pw' prefix rather than 'lib'

-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'

-      ;;

-    esac

-    ;;

-

-  *)

-    library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'

-    ;;

-  esac

-  dynamic_linker='Win32 ld.exe'

-  # FIXME: first we should search . and the directory the executable is in

-  shlibpath_var=PATH

-  ;;

-

-darwin* | rhapsody*)

-  dynamic_linker="$host_os dyld"

-  version_type=darwin

-  need_lib_prefix=no

-  need_version=no

-  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'

-  soname_spec='${libname}${release}${major}$shared_ext'

-  shlibpath_overrides_runpath=yes

-  shlibpath_var=DYLD_LIBRARY_PATH

-  shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'

-  # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.

-  if test "$GCC" = yes; then

-    sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`

-  else

-    sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'

-  fi

-  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'

-  ;;

-

-dgux*)

-  version_type=linux

-  need_lib_prefix=no

-  need_version=no

-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'

-  soname_spec='${libname}${release}${shared_ext}$major'

-  shlibpath_var=LD_LIBRARY_PATH

-  ;;

-

-freebsd1*)

-  dynamic_linker=no

-  ;;

-

-kfreebsd*-gnu)

-  version_type=linux

-  need_lib_prefix=no

-  need_version=no

-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'

-  soname_spec='${libname}${release}${shared_ext}$major'

-  shlibpath_var=LD_LIBRARY_PATH

-  shlibpath_overrides_runpath=no

-  hardcode_into_libs=yes

-  dynamic_linker='GNU ld.so'

-  ;;

-

-freebsd*)

-  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`

-  version_type=freebsd-$objformat

-  case $version_type in

-    freebsd-elf*)

-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'

-      need_version=no

-      need_lib_prefix=no

-      ;;

-    freebsd-*)

-      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'

-      need_version=yes

-      ;;

-  esac

-  shlibpath_var=LD_LIBRARY_PATH

-  case $host_os in

-  freebsd2*)

-    shlibpath_overrides_runpath=yes

-    ;;

-  freebsd3.[01]* | freebsdelf3.[01]*)

-    shlibpath_overrides_runpath=yes

-    hardcode_into_libs=yes

-    ;;

-  *) # from 3.2 on

-    shlibpath_overrides_runpath=no

-    hardcode_into_libs=yes

-    ;;

-  esac

-  ;;

-

-gnu*)

-  version_type=linux

-  need_lib_prefix=no

-  need_version=no

-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'

-  soname_spec='${libname}${release}${shared_ext}$major'

-  shlibpath_var=LD_LIBRARY_PATH

-  hardcode_into_libs=yes

-  ;;

-

-hpux9* | hpux10* | hpux11*)

-  # Give a soname corresponding to the major version so that dld.sl refuses to

-  # link against other versions.

-  version_type=sunos

-  need_lib_prefix=no

-  need_version=no

-  case "$host_cpu" in

-  ia64*)

-    shrext_cmds='.so'

-    hardcode_into_libs=yes

-    dynamic_linker="$host_os dld.so"

-    shlibpath_var=LD_LIBRARY_PATH

-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.

-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'

-    soname_spec='${libname}${release}${shared_ext}$major'

-    if test "X$HPUX_IA64_MODE" = X32; then

-      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"

-    else

-      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"

-    fi

-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec

-    ;;

-   hppa*64*)

-     shrext_cmds='.sl'

-     hardcode_into_libs=yes

-     dynamic_linker="$host_os dld.sl"

-     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH

-     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.

-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'

-     soname_spec='${libname}${release}${shared_ext}$major'

-     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"

-     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec

-     ;;

-   *)

-    shrext_cmds='.sl'

-    dynamic_linker="$host_os dld.sl"

-    shlibpath_var=SHLIB_PATH

-    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH

-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'

-    soname_spec='${libname}${release}${shared_ext}$major'

-    ;;

-  esac

-  # HP-UX runs *really* slowly unless shared libraries are mode 555.

-  postinstall_cmds='chmod 555 $lib'

-  ;;

-

-irix5* | irix6* | nonstopux*)

-  case $host_os in

-    nonstopux*) version_type=nonstopux ;;

-    *)

-        if test "$lt_cv_prog_gnu_ld" = yes; then

-                version_type=linux

-        else

-                version_type=irix

-        fi ;;

-  esac

-  need_lib_prefix=no

-  need_version=no

-  soname_spec='${libname}${release}${shared_ext}$major'

-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'

-  case $host_os in

-  irix5* | nonstopux*)

-    libsuff= shlibsuff=

-    ;;

-  *)

-    case $LD in # libtool.m4 will add one of these switches to LD

-    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")

-      libsuff= shlibsuff= libmagic=32-bit;;

-    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")

-      libsuff=32 shlibsuff=N32 libmagic=N32;;

-    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")

-      libsuff=64 shlibsuff=64 libmagic=64-bit;;

-    *) libsuff= shlibsuff= libmagic=never-match;;

-    esac

-    ;;

-  esac

-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH

-  shlibpath_overrides_runpath=no

-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"

-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"

-  hardcode_into_libs=yes

-  ;;

-

-# No shared lib support for Linux oldld, aout, or coff.

-linux*oldld* | linux*aout* | linux*coff*)

-  dynamic_linker=no

-  ;;

-

-# This must be Linux ELF.

-linux*)

-  version_type=linux

-  need_lib_prefix=no

-  need_version=no

-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'

-  soname_spec='${libname}${release}${shared_ext}$major'

-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'

-  shlibpath_var=LD_LIBRARY_PATH

-  shlibpath_overrides_runpath=no

-  # This implies no fast_install, which is unacceptable.

-  # Some rework will be needed to allow for fast_install

-  # before this can be enabled.

-  hardcode_into_libs=yes

-

-  # Append ld.so.conf contents to the search path

-  if test -f /etc/ld.so.conf; then

-    lt_ld_extra=`$SED -e 's/[:,\t]/ /g;s/=[^=]*$//;s/=[^= ]* / /g' /etc/ld.so.conf | tr '\n' ' '`

-    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"

-  fi

-

-  # We used to test for /lib/ld.so.1 and disable shared libraries on

-  # powerpc, because MkLinux only supported shared libraries with the

-  # GNU dynamic linker.  Since this was broken with cross compilers,

-  # most powerpc-linux boxes support dynamic linking these days and

-  # people can always --disable-shared, the test was removed, and we

-  # assume the GNU/Linux dynamic linker is in use.

-  dynamic_linker='GNU/Linux ld.so'

-  ;;

-

-knetbsd*-gnu)

-  version_type=linux

-  need_lib_prefix=no

-  need_version=no

-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'

-  soname_spec='${libname}${release}${shared_ext}$major'

-  shlibpath_var=LD_LIBRARY_PATH

-  shlibpath_overrides_runpath=no

-  hardcode_into_libs=yes

-  dynamic_linker='GNU ld.so'

-  ;;

-

-netbsd*)

-  version_type=sunos

-  need_lib_prefix=no

-  need_version=no

-  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then

-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'

-    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'

-    dynamic_linker='NetBSD (a.out) ld.so'

-  else

-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'

-    soname_spec='${libname}${release}${shared_ext}$major'

-    dynamic_linker='NetBSD ld.elf_so'

-  fi

-  shlibpath_var=LD_LIBRARY_PATH

-  shlibpath_overrides_runpath=yes

-  hardcode_into_libs=yes

-  ;;

-

-newsos6)

-  version_type=linux

-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'

-  shlibpath_var=LD_LIBRARY_PATH

-  shlibpath_overrides_runpath=yes

-  ;;

-

-nto-qnx*)

-  version_type=linux

-  need_lib_prefix=no

-  need_version=no

-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'

-  soname_spec='${libname}${release}${shared_ext}$major'

-  shlibpath_var=LD_LIBRARY_PATH

-  shlibpath_overrides_runpath=yes

-  ;;

-

-openbsd*)

-  version_type=sunos

-  need_lib_prefix=no

-  need_version=yes

-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'

-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'

-  shlibpath_var=LD_LIBRARY_PATH

-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then

-    case $host_os in

-      openbsd2.[[89]] | openbsd2.[[89]].*)

-        shlibpath_overrides_runpath=no

-        ;;

-      *)

-        shlibpath_overrides_runpath=yes

-        ;;

-      esac

-  else

-    shlibpath_overrides_runpath=yes

-  fi

-  ;;

-

-os2*)

-  libname_spec='$name'

-  shrext_cmds=".dll"

-  need_lib_prefix=no

-  library_names_spec='$libname${shared_ext} $libname.a'

-  dynamic_linker='OS/2 ld.exe'

-  shlibpath_var=LIBPATH

-  ;;

-

-osf3* | osf4* | osf5*)

-  version_type=osf

-  need_lib_prefix=no

-  need_version=no

-  soname_spec='${libname}${release}${shared_ext}$major'

-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'

-  shlibpath_var=LD_LIBRARY_PATH

-  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"

-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"

-  ;;

-

-sco3.2v5*)

-  version_type=osf

-  soname_spec='${libname}${release}${shared_ext}$major'

-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'

-  shlibpath_var=LD_LIBRARY_PATH

-  ;;

-

-solaris*)

-  version_type=linux

-  need_lib_prefix=no

-  need_version=no

-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'

-  soname_spec='${libname}${release}${shared_ext}$major'

-  shlibpath_var=LD_LIBRARY_PATH

-  shlibpath_overrides_runpath=yes

-  hardcode_into_libs=yes

-  # ldd complains unless libraries are executable

-  postinstall_cmds='chmod +x $lib'

-  ;;

-

-sunos4*)

-  version_type=sunos

-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'

-  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'

-  shlibpath_var=LD_LIBRARY_PATH

-  shlibpath_overrides_runpath=yes

-  if test "$with_gnu_ld" = yes; then

-    need_lib_prefix=no

-  fi

-  need_version=yes

-  ;;

-

-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)

-  version_type=linux

-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'

-  soname_spec='${libname}${release}${shared_ext}$major'

-  shlibpath_var=LD_LIBRARY_PATH

-  case $host_vendor in

-    sni)

-      shlibpath_overrides_runpath=no

-      need_lib_prefix=no

-      export_dynamic_flag_spec='${wl}-Blargedynsym'

-      runpath_var=LD_RUN_PATH

-      ;;

-    siemens)

-      need_lib_prefix=no

-      ;;

-    motorola)

-      need_lib_prefix=no

-      need_version=no

-      shlibpath_overrides_runpath=no

-      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'

-      ;;

-  esac

-  ;;

-

-sysv4*MP*)

-  if test -d /usr/nec ;then

-    version_type=linux

-    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'

-    soname_spec='$libname${shared_ext}.$major'

-    shlibpath_var=LD_LIBRARY_PATH

-  fi

-  ;;

-

-uts4*)

-  version_type=linux

-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'

-  soname_spec='${libname}${release}${shared_ext}$major'

-  shlibpath_var=LD_LIBRARY_PATH

-  ;;

-

-*)

-  dynamic_linker=no

-  ;;

-esac

-AC_MSG_RESULT([$dynamic_linker])

-test "$dynamic_linker" = no && can_build_shared=no

-])# AC_LIBTOOL_SYS_DYNAMIC_LINKER

-

-

-# _LT_AC_TAGCONFIG

-# ----------------

-AC_DEFUN([_LT_AC_TAGCONFIG],

-[AC_ARG_WITH([tags],

-    [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],

-        [include additional configurations @<:@automatic@:>@])],

-    [tagnames="$withval"])

-

-if test -f "$ltmain" && test -n "$tagnames"; then

-  if test ! -f "${ofile}"; then

-    AC_MSG_WARN([output file `$ofile' does not exist])

-  fi

-

-  if test -z "$LTCC"; then

-    eval "`$SHELL ${ofile} --config | grep '^LTCC='`"

-    if test -z "$LTCC"; then

-      AC_MSG_WARN([output file `$ofile' does not look like a libtool script])

-    else

-      AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])

-    fi

-  fi

-

-  # Extract list of available tagged configurations in $ofile.

-  # Note that this assumes the entire list is on one line.

-  available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`

-

-  lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"

-  for tagname in $tagnames; do

-    IFS="$lt_save_ifs"

-    # Check whether tagname contains only valid characters

-    case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in

-    "") ;;

-    *)  AC_MSG_ERROR([invalid tag name: $tagname])

-        ;;

-    esac

-

-    if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null

-    then

-      AC_MSG_ERROR([tag name \"$tagname\" already exists])

-    fi

-

-    # Update the list of available tags.

-    if test -n "$tagname"; then

-      echo appending configuration tag \"$tagname\" to $ofile

-

-      case $tagname in

-      CXX)

-        if test -n "$CXX" && test "X$CXX" != "Xno"; then

-          AC_LIBTOOL_LANG_CXX_CONFIG

-        else

-          tagname=""

-        fi

-        ;;

-

-      F77)

-        if test -n "$F77" && test "X$F77" != "Xno"; then

-          AC_LIBTOOL_LANG_F77_CONFIG

-        else

-          tagname=""

-        fi

-        ;;

-

-      GCJ)

-        if test -n "$GCJ" && test "X$GCJ" != "Xno"; then

-          AC_LIBTOOL_LANG_GCJ_CONFIG

-        else

-          tagname=""

-        fi

-        ;;

-

-      RC)

-        AC_LIBTOOL_LANG_RC_CONFIG

-        ;;

-

-      *)

-        AC_MSG_ERROR([Unsupported tag name: $tagname])

-        ;;

-      esac

-

-      # Append the new tag name to the list of available tags.

-      if test -n "$tagname" ; then

-      available_tags="$available_tags $tagname"

-    fi

-    fi

-  done

-  IFS="$lt_save_ifs"

-

-  # Now substitute the updated list of available tags.

-  if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then

-    mv "${ofile}T" "$ofile"

-    chmod +x "$ofile"

-  else

-    rm -f "${ofile}T"

-    AC_MSG_ERROR([unable to update list of available tagged configurations.])

-  fi

-fi

-])# _LT_AC_TAGCONFIG

-

-

-# AC_LIBTOOL_DLOPEN

-# -----------------

-# enable checks for dlopen support

-AC_DEFUN([AC_LIBTOOL_DLOPEN],

- [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])

-])# AC_LIBTOOL_DLOPEN

-

-

-# AC_LIBTOOL_WIN32_DLL

-# --------------------

-# declare package support for building win32 dll's

-AC_DEFUN([AC_LIBTOOL_WIN32_DLL],

-[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])

-])# AC_LIBTOOL_WIN32_DLL

-

-

-# AC_ENABLE_SHARED([DEFAULT])

-# ---------------------------

-# implement the --enable-shared flag

-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.

-AC_DEFUN([AC_ENABLE_SHARED],

-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl

-AC_ARG_ENABLE([shared],

-    [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],

-        [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],

-    [p=${PACKAGE-default}

-    case $enableval in

-    yes) enable_shared=yes ;;

-    no) enable_shared=no ;;

-    *)

-      enable_shared=no

-      # Look at the argument we got.  We use all the common list separators.

-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"

-      for pkg in $enableval; do

-        IFS="$lt_save_ifs"

-        if test "X$pkg" = "X$p"; then

-          enable_shared=yes

-        fi

-      done

-      IFS="$lt_save_ifs"

-      ;;

-    esac],

-    [enable_shared=]AC_ENABLE_SHARED_DEFAULT)

-])# AC_ENABLE_SHARED

-

-

-# AC_DISABLE_SHARED

-# -----------------

-#- set the default shared flag to --disable-shared

-AC_DEFUN([AC_DISABLE_SHARED],

-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl

-AC_ENABLE_SHARED(no)

-])# AC_DISABLE_SHARED

-

-

-# AC_ENABLE_STATIC([DEFAULT])

-# ---------------------------

-# implement the --enable-static flag

-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.

-AC_DEFUN([AC_ENABLE_STATIC],

-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl

-AC_ARG_ENABLE([static],

-    [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],

-        [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],

-    [p=${PACKAGE-default}

-    case $enableval in

-    yes) enable_static=yes ;;

-    no) enable_static=no ;;

-    *)

-     enable_static=no

-      # Look at the argument we got.  We use all the common list separators.

-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"

-      for pkg in $enableval; do

-        IFS="$lt_save_ifs"

-        if test "X$pkg" = "X$p"; then

-          enable_static=yes

-        fi

-      done

-      IFS="$lt_save_ifs"

-      ;;

-    esac],

-    [enable_static=]AC_ENABLE_STATIC_DEFAULT)

-])# AC_ENABLE_STATIC

-

-

-# AC_DISABLE_STATIC

-# -----------------

-# set the default static flag to --disable-static

-AC_DEFUN([AC_DISABLE_STATIC],

-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl

-AC_ENABLE_STATIC(no)

-])# AC_DISABLE_STATIC

-

-

-# AC_ENABLE_FAST_INSTALL([DEFAULT])

-# ---------------------------------

-# implement the --enable-fast-install flag

-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.

-AC_DEFUN([AC_ENABLE_FAST_INSTALL],

-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl

-AC_ARG_ENABLE([fast-install],

-    [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],

-    [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],

-    [p=${PACKAGE-default}

-    case $enableval in

-    yes) enable_fast_install=yes ;;

-    no) enable_fast_install=no ;;

-    *)

-      enable_fast_install=no

-      # Look at the argument we got.  We use all the common list separators.

-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"

-      for pkg in $enableval; do

-        IFS="$lt_save_ifs"

-        if test "X$pkg" = "X$p"; then

-          enable_fast_install=yes

-        fi

-      done

-      IFS="$lt_save_ifs"

-      ;;

-    esac],

-    [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)

-])# AC_ENABLE_FAST_INSTALL

-

-

-# AC_DISABLE_FAST_INSTALL

-# -----------------------

-# set the default to --disable-fast-install

-AC_DEFUN([AC_DISABLE_FAST_INSTALL],

-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl

-AC_ENABLE_FAST_INSTALL(no)

-])# AC_DISABLE_FAST_INSTALL

-

-

-# AC_LIBTOOL_PICMODE([MODE])

-# --------------------------

-# implement the --with-pic flag

-# MODE is either `yes' or `no'.  If omitted, it defaults to `both'.

-AC_DEFUN([AC_LIBTOOL_PICMODE],

-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl

-pic_mode=ifelse($#,1,$1,default)

-])# AC_LIBTOOL_PICMODE

-

-

-# AC_PROG_EGREP

-# -------------

-# This is predefined starting with Autoconf 2.54, so this conditional

-# definition can be removed once we require Autoconf 2.54 or later.

-m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],

-[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],

-   [if echo a | (grep -E '(a|b)') >/dev/null 2>&1

-    then ac_cv_prog_egrep='grep -E'

-    else ac_cv_prog_egrep='egrep'

-    fi])

- EGREP=$ac_cv_prog_egrep

- AC_SUBST([EGREP])

-])])

-

-

-# AC_PATH_TOOL_PREFIX

-# -------------------

-# find a file program which can recognise shared library

-AC_DEFUN([AC_PATH_TOOL_PREFIX],

-[AC_REQUIRE([AC_PROG_EGREP])dnl

-AC_MSG_CHECKING([for $1])

-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,

-[case $MAGIC_CMD in

-[[\\/*] |  ?:[\\/]*])

-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.

-  ;;

-*)

-  lt_save_MAGIC_CMD="$MAGIC_CMD"

-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR

-dnl $ac_dummy forces splitting on constant user-supplied paths.

-dnl POSIX.2 word splitting is done only on the output of word expansions,

-dnl not every word.  This closes a longstanding sh security hole.

-  ac_dummy="ifelse([$2], , $PATH, [$2])"

-  for ac_dir in $ac_dummy; do

-    IFS="$lt_save_ifs"

-    test -z "$ac_dir" && ac_dir=.

-    if test -f $ac_dir/$1; then

-      lt_cv_path_MAGIC_CMD="$ac_dir/$1"

-      if test -n "$file_magic_test_file"; then

-        case $deplibs_check_method in

-        "file_magic "*)

-          file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"

-          MAGIC_CMD="$lt_cv_path_MAGIC_CMD"

-          if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |

-            $EGREP "$file_magic_regex" > /dev/null; then

-            :

-          else

-            cat <<EOF 1>&2

-

-*** Warning: the command libtool uses to detect shared libraries,

-*** $file_magic_cmd, produces output that libtool cannot recognize.

-*** The result is that libtool may fail to recognize shared libraries

-*** as such.  This will affect the creation of libtool libraries that

-*** depend on shared libraries, but programs linked with such libtool

-*** libraries will work regardless of this problem.  Nevertheless, you

-*** may want to report the problem to your system manager and/or to

-*** bug-libtool@gnu.org

-

-EOF

-          fi ;;

-        esac

-      fi

-      break

-    fi

-  done

-  IFS="$lt_save_ifs"

-  MAGIC_CMD="$lt_save_MAGIC_CMD"

-  ;;

-esac])

-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"

-if test -n "$MAGIC_CMD"; then

-  AC_MSG_RESULT($MAGIC_CMD)

-else

-  AC_MSG_RESULT(no)

-fi

-])# AC_PATH_TOOL_PREFIX

-

-

-# AC_PATH_MAGIC

-# -------------

-# find a file program which can recognise a shared library

-AC_DEFUN([AC_PATH_MAGIC],

-[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)

-if test -z "$lt_cv_path_MAGIC_CMD"; then

-  if test -n "$ac_tool_prefix"; then

-    AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)

-  else

-    MAGIC_CMD=:

-  fi

-fi

-])# AC_PATH_MAGIC

-

-

-# AC_PROG_LD

-# ----------

-# find the pathname to the GNU or non-GNU linker

-AC_DEFUN([AC_PROG_LD],

-[AC_ARG_WITH([gnu-ld],

-    [AC_HELP_STRING([--with-gnu-ld],

-        [assume the C compiler uses GNU ld @<:@default=no@:>@])],

-    [test "$withval" = no || with_gnu_ld=yes],

-    [with_gnu_ld=no])

-AC_REQUIRE([LT_AC_PROG_SED])dnl

-AC_REQUIRE([AC_PROG_CC])dnl

-AC_REQUIRE([AC_CANONICAL_HOST])dnl

-AC_REQUIRE([AC_CANONICAL_BUILD])dnl

-ac_prog=ld

-if test "$GCC" = yes; then

-  # Check if gcc -print-prog-name=ld gives a path.

-  AC_MSG_CHECKING([for ld used by $CC])

-  case $host in

-  *-*-mingw*)

-    # gcc leaves a trailing carriage return which upsets mingw

-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;

-  *)

-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;

-  esac

-  case $ac_prog in

-    # Accept absolute paths.

-    [[\\/]]* | ?:[[\\/]]*)

-      re_direlt='/[[^/]][[^/]]*/\.\./'

-      # Canonicalize the pathname of ld

-      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`

-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do

-        ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`

-      done

-      test -z "$LD" && LD="$ac_prog"

-      ;;

-  "")

-    # If it fails, then pretend we aren't using GCC.

-    ac_prog=ld

-    ;;

-  *)

-    # If it is relative, then search for the first ld in PATH.

-    with_gnu_ld=unknown

-    ;;

-  esac

-elif test "$with_gnu_ld" = yes; then

-  AC_MSG_CHECKING([for GNU ld])

-else

-  AC_MSG_CHECKING([for non-GNU ld])

-fi

-AC_CACHE_VAL(lt_cv_path_LD,

-[if test -z "$LD"; then

-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR

-  for ac_dir in $PATH; do

-    IFS="$lt_save_ifs"

-    test -z "$ac_dir" && ac_dir=.

-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then

-      lt_cv_path_LD="$ac_dir/$ac_prog"

-      # Check to see if the program is GNU ld.  I'd rather use --version,

-      # but apparently some GNU ld's only accept -v.

-      # Break only if it was the GNU/non-GNU ld that we prefer.

-      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in

-      *GNU* | *'with BFD'*)

-        test "$with_gnu_ld" != no && break

-        ;;

-      *)

-        test "$with_gnu_ld" != yes && break

-        ;;

-      esac

-    fi

-  done

-  IFS="$lt_save_ifs"

-else

-  lt_cv_path_LD="$LD" # Let the user override the test with a path.

-fi])

-LD="$lt_cv_path_LD"

-if test -n "$LD"; then

-  AC_MSG_RESULT($LD)

-else

-  AC_MSG_RESULT(no)

-fi

-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])

-AC_PROG_LD_GNU

-])# AC_PROG_LD

-

-

-# AC_PROG_LD_GNU

-# --------------

-AC_DEFUN([AC_PROG_LD_GNU],

-[AC_REQUIRE([AC_PROG_EGREP])dnl

-AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,

-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.

-case `$LD -v 2>&1 </dev/null` in

-*GNU* | *'with BFD'*)

-  lt_cv_prog_gnu_ld=yes

-  ;;

-*)

-  lt_cv_prog_gnu_ld=no

-  ;;

-esac])

-with_gnu_ld=$lt_cv_prog_gnu_ld

-])# AC_PROG_LD_GNU

-

-

-# AC_PROG_LD_RELOAD_FLAG

-# ----------------------

-# find reload flag for linker

-#   -- PORTME Some linkers may need a different reload flag.

-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],

-[AC_CACHE_CHECK([for $LD option to reload object files],

-  lt_cv_ld_reload_flag,

-  [lt_cv_ld_reload_flag='-r'])

-reload_flag=$lt_cv_ld_reload_flag

-case $reload_flag in

-"" | " "*) ;;

-*) reload_flag=" $reload_flag" ;;

-esac

-reload_cmds='$LD$reload_flag -o $output$reload_objs'

-])# AC_PROG_LD_RELOAD_FLAG

-

-

-# AC_DEPLIBS_CHECK_METHOD

-# -----------------------

-# how to check for library dependencies

-#  -- PORTME fill in with the dynamic library characteristics

-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],

-[AC_CACHE_CHECK([how to recognise dependent libraries],

-lt_cv_deplibs_check_method,

-[lt_cv_file_magic_cmd='$MAGIC_CMD'

-lt_cv_file_magic_test_file=

-lt_cv_deplibs_check_method='unknown'

-# Need to set the preceding variable on all platforms that support

-# interlibrary dependencies.

-# 'none' -- dependencies not supported.

-# `unknown' -- same as none, but documents that we really don't know.

-# 'pass_all' -- all dependencies passed with no checks.

-# 'test_compile' -- check by making test program.

-# 'file_magic [[regex]]' -- check by looking for files in library path

-# which responds to the $file_magic_cmd with a given extended regex.

-# If you have `file' or equivalent on your system and you're not sure

-# whether `pass_all' will *always* work, you probably want this one.

-

-case $host_os in

-aix4* | aix5*)

-  lt_cv_deplibs_check_method=pass_all

-  ;;

-

-beos*)

-  lt_cv_deplibs_check_method=pass_all

-  ;;

-

-bsdi4*)

-  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'

-  lt_cv_file_magic_cmd='/usr/bin/file -L'

-  lt_cv_file_magic_test_file=/shlib/libc.so

-  ;;

-

-cygwin*)

-  # func_win32_libid is a shell function defined in ltmain.sh

-  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'

-  lt_cv_file_magic_cmd='func_win32_libid'

-  ;;

-

-mingw* | pw32*)

-  # Base MSYS/MinGW do not provide the 'file' command needed by

-  # func_win32_libid shell function, so use a weaker test based on 'objdump'.

-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'

-  lt_cv_file_magic_cmd='$OBJDUMP -f'

-  ;;

-

-darwin* | rhapsody*)

-  lt_cv_deplibs_check_method=pass_all

-  ;;

-

-freebsd* | kfreebsd*-gnu)

-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then

-    case $host_cpu in

-    i*86 )

-      # Not sure whether the presence of OpenBSD here was a mistake.

-      # Let's accept both of them until this is cleared up.

-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library'

-      lt_cv_file_magic_cmd=/usr/bin/file

-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`

-      ;;

-    esac

-  else

-    lt_cv_deplibs_check_method=pass_all

-  fi

-  ;;

-

-gnu*)

-  lt_cv_deplibs_check_method=pass_all

-  ;;

-

-hpux10.20* | hpux11*)

-  lt_cv_file_magic_cmd=/usr/bin/file

-  case "$host_cpu" in

-  ia64*)

-    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'

-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so

-    ;;

-  hppa*64*)

-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']

-    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl

-    ;;

-  *)

-    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'

-    lt_cv_file_magic_test_file=/usr/lib/libc.sl

-    ;;

-  esac

-  ;;

-

-irix5* | irix6* | nonstopux*)

-  case $LD in

-  *-32|*"-32 ") libmagic=32-bit;;

-  *-n32|*"-n32 ") libmagic=N32;;

-  *-64|*"-64 ") libmagic=64-bit;;

-  *) libmagic=never-match;;

-  esac

-  lt_cv_deplibs_check_method=pass_all

-  ;;

-

-# This must be Linux ELF.

-linux*)

-  lt_cv_deplibs_check_method=pass_all

-  ;;

-

-netbsd* | knetbsd*-gnu)

-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then

-    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'

-  else

-    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'

-  fi

-  ;;

-

-newos6*)

-  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'

-  lt_cv_file_magic_cmd=/usr/bin/file

-  lt_cv_file_magic_test_file=/usr/lib/libnls.so

-  ;;

-

-nto-qnx*)

-  lt_cv_deplibs_check_method=unknown

-  ;;

-

-openbsd*)

-  lt_cv_file_magic_cmd=/usr/bin/file

-  lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`

-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then

-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object'

-  else

-    lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'

-  fi

-  ;;

-

-osf3* | osf4* | osf5*)

-  lt_cv_deplibs_check_method=pass_all

-  ;;

-

-sco3.2v5*)

-  lt_cv_deplibs_check_method=pass_all

-  ;;

-

-solaris*)

-  lt_cv_deplibs_check_method=pass_all

-  ;;

-

-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)

-  case $host_vendor in

-  motorola)

-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'

-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`

-    ;;

-  ncr)

-    lt_cv_deplibs_check_method=pass_all

-    ;;

-  sequent)

-    lt_cv_file_magic_cmd='/bin/file'

-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'

-    ;;

-  sni)

-    lt_cv_file_magic_cmd='/bin/file'

-    lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"

-    lt_cv_file_magic_test_file=/lib/libc.so

-    ;;

-  siemens)

-    lt_cv_deplibs_check_method=pass_all

-    ;;

-  esac

-  ;;

-

-sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*)

-  lt_cv_deplibs_check_method=pass_all

-  ;;

-esac

-])

-file_magic_cmd=$lt_cv_file_magic_cmd

-deplibs_check_method=$lt_cv_deplibs_check_method

-test -z "$deplibs_check_method" && deplibs_check_method=unknown

-])# AC_DEPLIBS_CHECK_METHOD

-

-

-# AC_PROG_NM

-# ----------

-# find the pathname to a BSD-compatible name lister

-AC_DEFUN([AC_PROG_NM],

-[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,

-[if test -n "$NM"; then

-  # Let the user override the test.

-  lt_cv_path_NM="$NM"

-else

-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR

-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do

-    IFS="$lt_save_ifs"

-    test -z "$ac_dir" && ac_dir=.

-    tmp_nm="$ac_dir/${ac_tool_prefix}nm"

-    if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then

-      # Check to see if the nm accepts a BSD-compat flag.

-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:

-      #   nm: unknown option "B" ignored

-      # Tru64's nm complains that /dev/null is an invalid object file

-      case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in

-      */dev/null* | *'Invalid file or object type'*)

-        lt_cv_path_NM="$tmp_nm -B"

-        break

-        ;;

-      *)

-        case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in

-        */dev/null*)

-          lt_cv_path_NM="$tmp_nm -p"

-          break

-          ;;

-        *)

-          lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but

-          continue # so that we can try to find one that supports BSD flags

-          ;;

-        esac

-      esac

-    fi

-  done

-  IFS="$lt_save_ifs"

-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm

-fi])

-NM="$lt_cv_path_NM"

-])# AC_PROG_NM

-

-

-# AC_CHECK_LIBM

-# -------------

-# check for math library

-AC_DEFUN([AC_CHECK_LIBM],

-[AC_REQUIRE([AC_CANONICAL_HOST])dnl

-LIBM=

-case $host in

-*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)

-  # These system don't have libm, or don't need it

-  ;;

-*-ncr-sysv4.3*)

-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")

-  AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")

-  ;;

-*)

-  AC_CHECK_LIB(m, cos, LIBM="-lm")

-  ;;

-esac

-])# AC_CHECK_LIBM

-

-

-# AC_LIBLTDL_CONVENIENCE([DIRECTORY])

-# -----------------------------------

-# sets LIBLTDL to the link flags for the libltdl convenience library and

-# LTDLINCL to the include flags for the libltdl header and adds

-# --enable-ltdl-convenience to the configure arguments.  Note that LIBLTDL

-# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If

-# DIRECTORY is not provided, it is assumed to be `libltdl'.  LIBLTDL will

-# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with

-# '${top_srcdir}/' (note the single quotes!).  If your package is not

-# flat and you're not using automake, define top_builddir and

-# top_srcdir appropriately in the Makefiles.

-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],

-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl

-  case $enable_ltdl_convenience in

-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;

-  "") enable_ltdl_convenience=yes

-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;

-  esac

-  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la

-  LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])

-  # For backwards non-gettext consistent compatibility...

-  INCLTDL="$LTDLINCL"

-])# AC_LIBLTDL_CONVENIENCE

-

-

-# AC_LIBLTDL_INSTALLABLE([DIRECTORY])

-# -----------------------------------

-# sets LIBLTDL to the link flags for the libltdl installable library and

-# LTDLINCL to the include flags for the libltdl header and adds

-# --enable-ltdl-install to the configure arguments.  Note that LIBLTDL

-# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If

-# DIRECTORY is not provided and an installed libltdl is not found, it is

-# assumed to be `libltdl'.  LIBLTDL will be prefixed with '${top_builddir}/'

-# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single

-# quotes!).  If your package is not flat and you're not using automake,

-# define top_builddir and top_srcdir appropriately in the Makefiles.

-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.

-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],

-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl

-  AC_CHECK_LIB(ltdl, lt_dlinit,

-  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],

-  [if test x"$enable_ltdl_install" = xno; then

-     AC_MSG_WARN([libltdl not installed, but installation disabled])

-   else

-     enable_ltdl_install=yes

-   fi

-  ])

-  if test x"$enable_ltdl_install" = x"yes"; then

-    ac_configure_args="$ac_configure_args --enable-ltdl-install"

-    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la

-    LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])

-  else

-    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"

-    LIBLTDL="-lltdl"

-    LTDLINCL=

-  fi

-  # For backwards non-gettext consistent compatibility...

-  INCLTDL="$LTDLINCL"

-])# AC_LIBLTDL_INSTALLABLE

-

-

-# AC_LIBTOOL_CXX

-# --------------

-# enable support for C++ libraries

-AC_DEFUN([AC_LIBTOOL_CXX],

-[AC_REQUIRE([_LT_AC_LANG_CXX])

-])# AC_LIBTOOL_CXX

-

-

-# _LT_AC_LANG_CXX

-# ---------------

-AC_DEFUN([_LT_AC_LANG_CXX],

-[AC_REQUIRE([AC_PROG_CXX])

-AC_REQUIRE([AC_PROG_CXXCPP])

-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX])

-])# _LT_AC_LANG_CXX

-

-

-# AC_LIBTOOL_F77

-# --------------

-# enable support for Fortran 77 libraries

-AC_DEFUN([AC_LIBTOOL_F77],

-[AC_REQUIRE([_LT_AC_LANG_F77])

-])# AC_LIBTOOL_F77

-

-

-# _LT_AC_LANG_F77

-# ---------------

-AC_DEFUN([_LT_AC_LANG_F77],

-[AC_REQUIRE([AC_PROG_F77])

-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77])

-])# _LT_AC_LANG_F77

-

-

-# AC_LIBTOOL_GCJ

-# --------------

-# enable support for GCJ libraries

-AC_DEFUN([AC_LIBTOOL_GCJ],

-[AC_REQUIRE([_LT_AC_LANG_GCJ])

-])# AC_LIBTOOL_GCJ

-

-

-# _LT_AC_LANG_GCJ

-# ---------------

-AC_DEFUN([_LT_AC_LANG_GCJ],

-[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],

-  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],

-    [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],

-      [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],

-         [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],

-           [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])

-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ])

-])# _LT_AC_LANG_GCJ

-

-

-# AC_LIBTOOL_RC

-# --------------

-# enable support for Windows resource files

-AC_DEFUN([AC_LIBTOOL_RC],

-[AC_REQUIRE([LT_AC_PROG_RC])

-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC])

-])# AC_LIBTOOL_RC

-

-

-# AC_LIBTOOL_LANG_C_CONFIG

-# ------------------------

-# Ensure that the configuration vars for the C compiler are

-# suitably defined.  Those variables are subsequently used by

-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.

-AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])

-AC_DEFUN([_LT_AC_LANG_C_CONFIG],

-[lt_save_CC="$CC"

-AC_LANG_PUSH(C)

-

-# Source file extension for C test sources.

-ac_ext=c

-

-# Object file extension for compiled C test sources.

-objext=o

-_LT_AC_TAGVAR(objext, $1)=$objext

-

-# Code to be used in simple compile tests

-lt_simple_compile_test_code="int some_variable = 0;\n"

-

-# Code to be used in simple link tests

-lt_simple_link_test_code='int main(){return(0);}\n'

-

-_LT_AC_SYS_COMPILER

-

-#

-# Check for any special shared library compilation flags.

-#

-_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)=

-if test "$GCC" = no; then

-  case $host_os in

-  sco3.2v5*)

-    _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf'

-    ;;

-  esac

-fi

-if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then

-  AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries])

-  if echo "$old_CC $old_CFLAGS " | grep "[[     ]]$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[        ]]" >/dev/null; then :

-  else

-    AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure])

-    _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no

-  fi

-fi

-

-

-#

-# Check to make sure the static flag actually works.

-#

-AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works],

-  _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),

-  $_LT_AC_TAGVAR(lt_prog_compiler_static, $1),

-  [],

-  [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])

-

-

-## CAVEAT EMPTOR:

-## There is no encapsulation within the following macros, do not change

-## the running order or otherwise move them around unless you know exactly

-## what you are doing...

-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)

-AC_LIBTOOL_PROG_COMPILER_PIC($1)

-AC_LIBTOOL_PROG_CC_C_O($1)

-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)

-AC_LIBTOOL_PROG_LD_SHLIBS($1)

-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)

-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)

-AC_LIBTOOL_SYS_LIB_STRIP

-AC_LIBTOOL_DLOPEN_SELF($1)

-

-# Report which librarie types wil actually be built

-AC_MSG_CHECKING([if libtool supports shared libraries])

-AC_MSG_RESULT([$can_build_shared])

-

-AC_MSG_CHECKING([whether to build shared libraries])

-test "$can_build_shared" = "no" && enable_shared=no

-

-# On AIX, shared libraries and static libraries use the same namespace, and

-# are all built from PIC.

-case "$host_os" in

-aix3*)

-  test "$enable_shared" = yes && enable_static=no

-  if test -n "$RANLIB"; then

-    archive_cmds="$archive_cmds~\$RANLIB \$lib"

-    postinstall_cmds='$RANLIB $lib'

-  fi

-  ;;

-

-aix4* | aix5*)

-  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then

-    test "$enable_shared" = yes && enable_static=no

-  fi

-  ;;

-  darwin* | rhapsody*)

-  if test "$GCC" = yes; then

-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no

-    case "$host_os" in

-    rhapsody* | darwin1.[[012]])

-      _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'

-      ;;

-    *) # Darwin 1.3 on

-      if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then

-        _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'

-      else

-        case ${MACOSX_DEPLOYMENT_TARGET} in

-          10.[[012]])

-            _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'

-            ;;

-          10.*)

-            _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup'

-            ;;

-        esac

-      fi

-      ;;

-    esac

-    output_verbose_link_cmd='echo'

-    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring'

-    _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'

-    # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's

-    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag  -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'

-    _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'

-    _LT_AC_TAGVAR(hardcode_direct, $1)=no

-    _LT_AC_TAGVAR(hardcode_automatic, $1)=yes

-    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported

-    _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'

-    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes

-  else

-    _LT_AC_TAGVAR(ld_shlibs, $1)=no

-  fi

-    ;;

-esac

-AC_MSG_RESULT([$enable_shared])

-

-AC_MSG_CHECKING([whether to build static libraries])

-# Make sure either enable_shared or enable_static is yes.

-test "$enable_shared" = yes || enable_static=yes

-AC_MSG_RESULT([$enable_static])

-

-AC_LIBTOOL_CONFIG($1)

-

-AC_LANG_POP

-CC="$lt_save_CC"

-])# AC_LIBTOOL_LANG_C_CONFIG

-

-

-# AC_LIBTOOL_LANG_CXX_CONFIG

-# --------------------------

-# Ensure that the configuration vars for the C compiler are

-# suitably defined.  Those variables are subsequently used by

-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.

-AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])

-AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],

-[AC_LANG_PUSH(C++)

-AC_REQUIRE([AC_PROG_CXX])

-AC_REQUIRE([AC_PROG_CXXCPP])

-

-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no

-_LT_AC_TAGVAR(allow_undefined_flag, $1)=

-_LT_AC_TAGVAR(always_export_symbols, $1)=no

-_LT_AC_TAGVAR(archive_expsym_cmds, $1)=

-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=

-_LT_AC_TAGVAR(hardcode_direct, $1)=no

-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=

-_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=

-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=

-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no

-_LT_AC_TAGVAR(hardcode_automatic, $1)=no

-_LT_AC_TAGVAR(module_cmds, $1)=

-_LT_AC_TAGVAR(module_expsym_cmds, $1)=

-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown

-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds

-_LT_AC_TAGVAR(no_undefined_flag, $1)=

-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=

-_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no

-

-# Dependencies to place before and after the object being linked:

-_LT_AC_TAGVAR(predep_objects, $1)=

-_LT_AC_TAGVAR(postdep_objects, $1)=

-_LT_AC_TAGVAR(predeps, $1)=

-_LT_AC_TAGVAR(postdeps, $1)=

-_LT_AC_TAGVAR(compiler_lib_search_path, $1)=

-

-# Source file extension for C++ test sources.

-ac_ext=cc

-

-# Object file extension for compiled C++ test sources.

-objext=o

-_LT_AC_TAGVAR(objext, $1)=$objext

-

-# Code to be used in simple compile tests

-lt_simple_compile_test_code="int some_variable = 0;\n"

-

-# Code to be used in simple link tests

-lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n'

-

-# ltmain only uses $CC for tagged configurations so make sure $CC is set.

-_LT_AC_SYS_COMPILER

-

-# Allow CC to be a program name with arguments.

-lt_save_CC=$CC

-lt_save_LD=$LD

-lt_save_GCC=$GCC

-GCC=$GXX

-lt_save_with_gnu_ld=$with_gnu_ld

-lt_save_path_LD=$lt_cv_path_LD

-if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then

-  lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx

-else

-  unset lt_cv_prog_gnu_ld

-fi

-if test -n "${lt_cv_path_LDCXX+set}"; then

-  lt_cv_path_LD=$lt_cv_path_LDCXX

-else

-  unset lt_cv_path_LD

-fi

-test -z "${LDCXX+set}" || LD=$LDCXX

-CC=${CXX-"c++"}

-compiler=$CC

-_LT_AC_TAGVAR(compiler, $1)=$CC

-cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`

-

-# We don't want -fno-exception wen compiling C++ code, so set the

-# no_builtin_flag separately

-if test "$GXX" = yes; then

-  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'

-else

-  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=

-fi

-

-if test "$GXX" = yes; then

-  # Set up default GNU C++ configuration

-

-  AC_PROG_LD

-

-  # Check if GNU C++ uses GNU ld as the underlying linker, since the

-  # archiving commands below assume that GNU ld is being used.

-  if test "$with_gnu_ld" = yes; then

-    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'

-    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'

-

-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'

-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'

-

-    # If archive_cmds runs LD, not CC, wlarc should be empty

-    # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to

-    #     investigate it a little bit more. (MM)

-    wlarc='${wl}'

-

-    # ancient GNU ld didn't support --whole-archive et. al.

-    if eval "`$CC -print-prog-name=ld` --help 2>&1" | \

-        grep 'no-whole-archive' > /dev/null; then

-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'

-    else

-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=

-    fi

-  else

-    with_gnu_ld=no

-    wlarc=

-

-    # A generic and very simple default shared library creation

-    # command for GNU C++ for the case where it uses the native

-    # linker, instead of GNU ld.  If possible, this setting should

-    # overridden to take advantage of the native linker features on

-    # the platform it is being used on.

-    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'

-  fi

-

-  # Commands to make compiler produce verbose output that lists

-  # what "hidden" libraries, object files and flags are used when

-  # linking a shared library.

-  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'

-

-else

-  GXX=no

-  with_gnu_ld=no

-  wlarc=

-fi

-

-# PORTME: fill in a description of your system's C++ link characteristics

-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])

-_LT_AC_TAGVAR(ld_shlibs, $1)=yes

-case $host_os in

-  aix3*)

-    # FIXME: insert proper C++ library support

-    _LT_AC_TAGVAR(ld_shlibs, $1)=no

-    ;;

-  aix4* | aix5*)

-    if test "$host_cpu" = ia64; then

-      # On IA64, the linker does run time linking by default, so we don't

-      # have to do anything special.

-      aix_use_runtimelinking=no

-      exp_sym_flag='-Bexport'

-      no_entry_flag=""

-    else

-      aix_use_runtimelinking=no

-

-      # Test if we are trying to use run time linking or normal

-      # AIX style linking. If -brtl is somewhere in LDFLAGS, we

-      # need to do runtime linking.

-      case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)

-        for ld_flag in $LDFLAGS; do

-          case $ld_flag in

-          *-brtl*)

-            aix_use_runtimelinking=yes

-            break

-            ;;

-          esac

-        done

-      esac

-

-      exp_sym_flag='-bexport'

-      no_entry_flag='-bnoentry'

-    fi

-

-    # When large executables or shared objects are built, AIX ld can

-    # have problems creating the table of contents.  If linking a library

-    # or program results in "error TOC overflow" add -mminimal-toc to

-    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not

-    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.

-

-    _LT_AC_TAGVAR(archive_cmds, $1)=''

-    _LT_AC_TAGVAR(hardcode_direct, $1)=yes

-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'

-    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes

-

-    if test "$GXX" = yes; then

-      case $host_os in aix4.[012]|aix4.[012].*)

-      # We only want to do this on AIX 4.2 and lower, the check

-      # below for broken collect2 doesn't work under 4.3+

-        collect2name=`${CC} -print-prog-name=collect2`

-        if test -f "$collect2name" && \

-           strings "$collect2name" | grep resolve_lib_name >/dev/null

-        then

-          # We have reworked collect2

-          _LT_AC_TAGVAR(hardcode_direct, $1)=yes

-        else

-          # We have old collect2

-          _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported

-          # It fails to find uninstalled libraries when the uninstalled

-          # path is not listed in the libpath.  Setting hardcode_minus_L

-          # to unsupported forces relinking

-          _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes

-          _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'

-          _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=

-        fi

-      esac

-      shared_flag='-shared'

-    else

-      # not using gcc

-      if test "$host_cpu" = ia64; then

-        # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release

-        # chokes on -Wl,-G. The following line is correct:

-        shared_flag='-G'

-      else

-        if test "$aix_use_runtimelinking" = yes; then

-          shared_flag='${wl}-G'

-        else

-          shared_flag='${wl}-bM:SRE'

-        fi

-      fi

-    fi

-

-    # It seems that -bexpall does not export symbols beginning with

-    # underscore (_), so it is better to generate a list of symbols to export.

-    _LT_AC_TAGVAR(always_export_symbols, $1)=yes

-    if test "$aix_use_runtimelinking" = yes; then

-      # Warning - without using the other runtime loading flags (-brtl),

-      # -berok will link without error, but may produce a broken library.

-      _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'

-      # Determine the default libpath from the value encoded in an empty executable.

-      _LT_AC_SYS_LIBPATH_AIX

-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"

-

-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"

-     else

-      if test "$host_cpu" = ia64; then

-        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'

-        _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"

-        _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"

-      else

-        # Determine the default libpath from the value encoded in an empty executable.

-        _LT_AC_SYS_LIBPATH_AIX

-        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"

-        # Warning - without using the other run time loading flags,

-        # -berok will link without error, but may produce a broken library.

-        _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'

-        _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'

-        # -bexpall does not export symbols beginning with underscore (_)

-        _LT_AC_TAGVAR(always_export_symbols, $1)=yes

-        # Exported symbols can be pulled into shared objects from archives

-        _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '

-        _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes

-        # This is similar to how AIX traditionally builds it's shared libraries.

-        _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'

-      fi

-    fi

-    ;;

-  chorus*)

-    case $cc_basename in

-      *)

-        # FIXME: insert proper C++ library support

-        _LT_AC_TAGVAR(ld_shlibs, $1)=no

-        ;;

-    esac

-    ;;

-

-  cygwin* | mingw* | pw32*)

-    # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,

-    # as there is no search path for DLLs.

-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'

-    _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported

-    _LT_AC_TAGVAR(always_export_symbols, $1)=no

-    _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes

-

-    if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then

-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'

-      # If the export-symbols file already is a .def file (1st line

-      # is EXPORTS), use it as is; otherwise, prepend...

-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then

-        cp $export_symbols $output_objdir/$soname.def;

-      else

-        echo EXPORTS > $output_objdir/$soname.def;

-        cat $export_symbols >> $output_objdir/$soname.def;

-      fi~

-      $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'

-    else

-      _LT_AC_TAGVAR(ld_shlibs, $1)=no

-    fi

-  ;;

-

-  darwin* | rhapsody*)

-  if test "$GXX" = yes; then

-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no

-    case "$host_os" in

-    rhapsody* | darwin1.[[012]])

-      _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'

-      ;;

-    *) # Darwin 1.3 on

-      if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then

-        _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'

-      else

-        case ${MACOSX_DEPLOYMENT_TARGET} in

-          10.[[012]])

-            _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'

-            ;;

-          10.*)

-            _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup'

-            ;;

-        esac

-      fi

-      ;;

-    esac

-    lt_int_apple_cc_single_mod=no

-    output_verbose_link_cmd='echo'

-    if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then

-      lt_int_apple_cc_single_mod=yes

-    fi

-    if test "X$lt_int_apple_cc_single_mod" = Xyes ; then

-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'

-    else

-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'

-    fi

-    _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'

-

-    # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's

-    if test "X$lt_int_apple_cc_single_mod" = Xyes ; then

-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'

-    else

-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'

-    fi

-    _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'

-    _LT_AC_TAGVAR(hardcode_direct, $1)=no

-    _LT_AC_TAGVAR(hardcode_automatic, $1)=yes

-    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported

-    _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'

-    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes

-  else

-    _LT_AC_TAGVAR(ld_shlibs, $1)=no

-  fi

-    ;;

-

-  dgux*)

-    case $cc_basename in

-      ec++)

-        # FIXME: insert proper C++ library support

-        _LT_AC_TAGVAR(ld_shlibs, $1)=no

-        ;;

-      ghcx)

-        # Green Hills C++ Compiler

-        # FIXME: insert proper C++ library support

-        _LT_AC_TAGVAR(ld_shlibs, $1)=no

-        ;;

-      *)

-        # FIXME: insert proper C++ library support

-        _LT_AC_TAGVAR(ld_shlibs, $1)=no

-        ;;

-    esac

-    ;;

-  freebsd[12]*)

-    # C++ shared libraries reported to be fairly broken before switch to ELF

-    _LT_AC_TAGVAR(ld_shlibs, $1)=no

-    ;;

-  freebsd-elf*)

-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no

-    ;;

-  freebsd* | kfreebsd*-gnu)

-    # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF

-    # conventions

-    _LT_AC_TAGVAR(ld_shlibs, $1)=yes

-    ;;

-  gnu*)

-    ;;

-  hpux9*)

-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'

-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:

-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'

-    _LT_AC_TAGVAR(hardcode_direct, $1)=yes

-    _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,

-                                # but as the default

-                                # location of the library.

-

-    case $cc_basename in

-    CC)

-      # FIXME: insert proper C++ library support

-      _LT_AC_TAGVAR(ld_shlibs, $1)=no

-      ;;

-    aCC)

-      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'

-      # Commands to make compiler produce verbose output that lists

-      # what "hidden" libraries, object files and flags are used when

-      # linking a shared library.

-      #

-      # There doesn't appear to be a way to prevent this compiler from

-      # explicitly linking system object files so we need to strip them

-      # from the output so that they don't get included in the library

-      # dependencies.

-      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'

-      ;;

-    *)

-      if test "$GXX" = yes; then

-        _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'

-      else

-        # FIXME: insert proper C++ library support

-        _LT_AC_TAGVAR(ld_shlibs, $1)=no

-      fi

-      ;;

-    esac

-    ;;

-  hpux10*|hpux11*)

-    if test $with_gnu_ld = no; then

-      case "$host_cpu" in

-      hppa*64*)

-        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'

-        _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'

-        _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:

-        ;;

-      ia64*)

-        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'

-        ;;

-      *)

-        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'

-        _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:

-        _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'

-        ;;

-      esac

-    fi

-    case "$host_cpu" in

-    hppa*64*)

-      _LT_AC_TAGVAR(hardcode_direct, $1)=no

-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no

-      ;;

-    ia64*)

-      _LT_AC_TAGVAR(hardcode_direct, $1)=no

-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no

-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,

-                                              # but as the default

-                                              # location of the library.

-      ;;

-    *)

-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes

-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,

-                                              # but as the default

-                                              # location of the library.

-      ;;

-    esac

-

-    case $cc_basename in

-      CC)

-        # FIXME: insert proper C++ library support

-        _LT_AC_TAGVAR(ld_shlibs, $1)=no

-        ;;

-      aCC)

-        case "$host_cpu" in

-        hppa*64*|ia64*)

-          _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'

-          ;;

-        *)

-          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'

-          ;;

-        esac

-        # Commands to make compiler produce verbose output that lists

-        # what "hidden" libraries, object files and flags are used when

-        # linking a shared library.

-        #

-        # There doesn't appear to be a way to prevent this compiler from

-        # explicitly linking system object files so we need to strip them

-        # from the output so that they don't get included in the library

-        # dependencies.

-        output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'

-        ;;

-      *)

-        if test "$GXX" = yes; then

-          if test $with_gnu_ld = no; then

-            case "$host_cpu" in

-            ia64*|hppa*64*)

-              _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'

-              ;;

-            *)

-              _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'

-              ;;

-            esac

-          fi

-        else

-          # FIXME: insert proper C++ library support

-          _LT_AC_TAGVAR(ld_shlibs, $1)=no

-        fi

-        ;;

-    esac

-    ;;

-  irix5* | irix6*)

-    case $cc_basename in

-      CC)

-        # SGI C++

-        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'

-

-        # Archives containing C++ object files must be created using

-        # "CC -ar", where "CC" is the IRIX C++ compiler.  This is

-        # necessary to make sure instantiated templates are included

-        # in the archive.

-        _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'

-        ;;

-      *)

-        if test "$GXX" = yes; then

-          if test "$with_gnu_ld" = no; then

-            _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'

-          else

-            _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'

-          fi

-        fi

-        _LT_AC_TAGVAR(link_all_deplibs, $1)=yes

-        ;;

-    esac

-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'

-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:

-    ;;

-  linux*)

-    case $cc_basename in

-      KCC)

-        # Kuck and Associates, Inc. (KAI) C++ Compiler

-

-        # KCC will only create a shared library if the output file

-        # ends with ".so" (or ".sl" for HP-UX), so rename the library

-        # to its proper name (with version) after linking.

-        _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'

-        _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'

-        # Commands to make compiler produce verbose output that lists

-        # what "hidden" libraries, object files and flags are used when

-        # linking a shared library.

-        #

-        # There doesn't appear to be a way to prevent this compiler from

-        # explicitly linking system object files so we need to strip them

-        # from the output so that they don't get included in the library

-        # dependencies.

-        output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'

-

-        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'

-        _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'

-

-        # Archives containing C++ object files must be created using

-        # "CC -Bstatic", where "CC" is the KAI C++ compiler.

-        _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'

-        ;;

-      icpc)

-        # Intel C++

-        with_gnu_ld=yes

-        _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no

-        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'

-        _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'

-        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'

-        _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'

-        _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'

-        ;;

-      cxx)

-        # Compaq C++

-        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'

-        _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'

-

-        runpath_var=LD_RUN_PATH

-        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'

-        _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:

-

-        # Commands to make compiler produce verbose output that lists

-        # what "hidden" libraries, object files and flags are used when

-        # linking a shared library.

-        #

-        # There doesn't appear to be a way to prevent this compiler from

-        # explicitly linking system object files so we need to strip them

-        # from the output so that they don't get included in the library

-        # dependencies.

-        output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'

-        ;;

-    esac

-    ;;

-  lynxos*)

-    # FIXME: insert proper C++ library support

-    _LT_AC_TAGVAR(ld_shlibs, $1)=no

-    ;;

-  m88k*)

-    # FIXME: insert proper C++ library support

-    _LT_AC_TAGVAR(ld_shlibs, $1)=no

-    ;;

-  mvs*)

-    case $cc_basename in

-      cxx)

-        # FIXME: insert proper C++ library support

-        _LT_AC_TAGVAR(ld_shlibs, $1)=no

-        ;;

-      *)

-        # FIXME: insert proper C++ library support

-        _LT_AC_TAGVAR(ld_shlibs, $1)=no

-        ;;

-    esac

-    ;;

-  netbsd* | knetbsd*-gnu)

-    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then

-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'

-      wlarc=

-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'

-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes

-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no

-    fi

-    # Workaround some broken pre-1.5 toolchains

-    output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'

-    ;;

-  osf3*)

-    case $cc_basename in

-      KCC)

-        # Kuck and Associates, Inc. (KAI) C++ Compiler

-

-        # KCC will only create a shared library if the output file

-        # ends with ".so" (or ".sl" for HP-UX), so rename the library

-        # to its proper name (with version) after linking.

-        _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'

-

-        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'

-        _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:

-

-        # Archives containing C++ object files must be created using

-        # "CC -Bstatic", where "CC" is the KAI C++ compiler.

-        _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'

-

-        ;;

-      RCC)

-        # Rational C++ 2.4.1

-        # FIXME: insert proper C++ library support

-        _LT_AC_TAGVAR(ld_shlibs, $1)=no

-        ;;

-      cxx)

-        _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'

-        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'

-

-        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'

-        _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:

-

-        # Commands to make compiler produce verbose output that lists

-        # what "hidden" libraries, object files and flags are used when

-        # linking a shared library.

-        #

-        # There doesn't appear to be a way to prevent this compiler from

-        # explicitly linking system object files so we need to strip them

-        # from the output so that they don't get included in the library

-        # dependencies.

-        output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'

-        ;;

-      *)

-        if test "$GXX" = yes && test "$with_gnu_ld" = no; then

-          _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'

-          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'

-

-          _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'

-          _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:

-

-          # Commands to make compiler produce verbose output that lists

-          # what "hidden" libraries, object files and flags are used when

-          # linking a shared library.

-          output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'

-

-        else

-          # FIXME: insert proper C++ library support

-          _LT_AC_TAGVAR(ld_shlibs, $1)=no

-        fi

-        ;;

-    esac

-    ;;

-  osf4* | osf5*)

-    case $cc_basename in

-      KCC)

-        # Kuck and Associates, Inc. (KAI) C++ Compiler

-

-        # KCC will only create a shared library if the output file

-        # ends with ".so" (or ".sl" for HP-UX), so rename the library

-        # to its proper name (with version) after linking.

-        _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'

-

-        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'

-        _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:

-

-        # Archives containing C++ object files must be created using

-        # the KAI C++ compiler.

-        _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'

-        ;;

-      RCC)

-        # Rational C++ 2.4.1

-        # FIXME: insert proper C++ library support

-        _LT_AC_TAGVAR(ld_shlibs, $1)=no

-        ;;

-      cxx)

-        _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'

-        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'

-        _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~

-          echo "-hidden">> $lib.exp~

-          $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~

-          $rm $lib.exp'

-

-        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'

-        _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:

-

-        # Commands to make compiler produce verbose output that lists

-        # what "hidden" libraries, object files and flags are used when

-        # linking a shared library.

-        #

-        # There doesn't appear to be a way to prevent this compiler from

-        # explicitly linking system object files so we need to strip them

-        # from the output so that they don't get included in the library

-        # dependencies.

-        output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'

-        ;;

-      *)

-        if test "$GXX" = yes && test "$with_gnu_ld" = no; then

-          _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'

-         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'

-

-          _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'

-          _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:

-

-          # Commands to make compiler produce verbose output that lists

-          # what "hidden" libraries, object files and flags are used when

-          # linking a shared library.

-          output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'

-

-        else

-          # FIXME: insert proper C++ library support

-          _LT_AC_TAGVAR(ld_shlibs, $1)=no

-        fi

-        ;;

-    esac

-    ;;

-  psos*)

-    # FIXME: insert proper C++ library support

-    _LT_AC_TAGVAR(ld_shlibs, $1)=no

-    ;;

-  sco*)

-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no

-    case $cc_basename in

-      CC)

-        # FIXME: insert proper C++ library support

-        _LT_AC_TAGVAR(ld_shlibs, $1)=no

-        ;;

-      *)

-        # FIXME: insert proper C++ library support

-        _LT_AC_TAGVAR(ld_shlibs, $1)=no

-        ;;

-    esac

-    ;;

-  sunos4*)

-    case $cc_basename in

-      CC)

-        # Sun C++ 4.x

-        # FIXME: insert proper C++ library support

-        _LT_AC_TAGVAR(ld_shlibs, $1)=no

-        ;;

-      lcc)

-        # Lucid

-        # FIXME: insert proper C++ library support

-        _LT_AC_TAGVAR(ld_shlibs, $1)=no

-        ;;

-      *)

-        # FIXME: insert proper C++ library support

-        _LT_AC_TAGVAR(ld_shlibs, $1)=no

-        ;;

-    esac

-    ;;

-  solaris*)

-    case $cc_basename in

-      CC)

-        # Sun C++ 4.2, 5.x and Centerline C++

-        _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'

-        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'

-        _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~

-        $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'

-

-        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'

-        _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no

-        case $host_os in

-          solaris2.[0-5] | solaris2.[0-5].*) ;;

-          *)

-            # The C++ compiler is used as linker so we must use $wl

-            # flag to pass the commands to the underlying system

-            # linker.

-            # Supported since Solaris 2.6 (maybe 2.5.1?)

-            _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'

-            ;;

-        esac

-        _LT_AC_TAGVAR(link_all_deplibs, $1)=yes

-

-        # Commands to make compiler produce verbose output that lists

-        # what "hidden" libraries, object files and flags are used when

-        # linking a shared library.

-        #

-        # There doesn't appear to be a way to prevent this compiler from

-        # explicitly linking system object files so we need to strip them

-        # from the output so that they don't get included in the library

-        # dependencies.

-        output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[[LR]]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'

-

-        # Archives containing C++ object files must be created using

-        # "CC -xar", where "CC" is the Sun C++ compiler.  This is

-        # necessary to make sure instantiated templates are included

-        # in the archive.

-        _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'

-        ;;

-      gcx)

-        # Green Hills C++ Compiler

-        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'

-

-        # The C++ compiler must be used to create the archive.

-        _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'

-        ;;

-      *)

-        # GNU C++ compiler with Solaris linker

-        if test "$GXX" = yes && test "$with_gnu_ld" = no; then

-          _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'

-          if $CC --version | grep -v '^2\.7' > /dev/null; then

-            _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'

-            _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~

-                $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'

-

-            # Commands to make compiler produce verbose output that lists

-            # what "hidden" libraries, object files and flags are used when

-            # linking a shared library.

-            output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""

-          else

-            # g++ 2.7 appears to require `-G' NOT `-shared' on this

-            # platform.

-            _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'

-            _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~

-                $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'

-

-            # Commands to make compiler produce verbose output that lists

-            # what "hidden" libraries, object files and flags are used when

-            # linking a shared library.

-            output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""

-          fi

-

-          _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'

-        fi

-        ;;

-    esac

-    ;;

-  sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)

-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no

-    ;;

-  tandem*)

-    case $cc_basename in

-      NCC)

-        # NonStop-UX NCC 3.20

-        # FIXME: insert proper C++ library support

-        _LT_AC_TAGVAR(ld_shlibs, $1)=no

-        ;;

-      *)

-        # FIXME: insert proper C++ library support

-        _LT_AC_TAGVAR(ld_shlibs, $1)=no

-        ;;

-    esac

-    ;;

-  vxworks*)

-    # FIXME: insert proper C++ library support

-    _LT_AC_TAGVAR(ld_shlibs, $1)=no

-    ;;

-  *)

-    # FIXME: insert proper C++ library support

-    _LT_AC_TAGVAR(ld_shlibs, $1)=no

-    ;;

-esac

-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])

-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no

-

-_LT_AC_TAGVAR(GCC, $1)="$GXX"

-_LT_AC_TAGVAR(LD, $1)="$LD"

-

-## CAVEAT EMPTOR:

-## There is no encapsulation within the following macros, do not change

-## the running order or otherwise move them around unless you know exactly

-## what you are doing...

-AC_LIBTOOL_POSTDEP_PREDEP($1)

-AC_LIBTOOL_PROG_COMPILER_PIC($1)

-AC_LIBTOOL_PROG_CC_C_O($1)

-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)

-AC_LIBTOOL_PROG_LD_SHLIBS($1)

-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)

-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)

-AC_LIBTOOL_SYS_LIB_STRIP

-AC_LIBTOOL_DLOPEN_SELF($1)

-

-AC_LIBTOOL_CONFIG($1)

-

-AC_LANG_POP

-CC=$lt_save_CC

-LDCXX=$LD

-LD=$lt_save_LD

-GCC=$lt_save_GCC

-with_gnu_ldcxx=$with_gnu_ld

-with_gnu_ld=$lt_save_with_gnu_ld

-lt_cv_path_LDCXX=$lt_cv_path_LD

-lt_cv_path_LD=$lt_save_path_LD

-lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld

-lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld

-])# AC_LIBTOOL_LANG_CXX_CONFIG

-

-# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])

-# ------------------------

-# Figure out "hidden" library dependencies from verbose

-# compiler output when linking a shared library.

-# Parse the compiler output and extract the necessary

-# objects, libraries and library flags.

-AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[

-dnl we can't use the lt_simple_compile_test_code here,

-dnl because it contains code intended for an executable,

-dnl not a library.  It's possible we should let each

-dnl tag define a new lt_????_link_test_code variable,

-dnl but it's only used here...

-ifelse([$1],[],[cat > conftest.$ac_ext <<EOF

-int a;

-void foo (void) { a = 0; }

-EOF

-],[$1],[CXX],[cat > conftest.$ac_ext <<EOF

-class Foo

-{

-public:

-  Foo (void) { a = 0; }

-private:

-  int a;

-};

-EOF

-],[$1],[F77],[cat > conftest.$ac_ext <<EOF

-      subroutine foo

-      implicit none

-      integer*4 a

-      a=0

-      return

-      end

-EOF

-],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF

-public class foo {

-  private int a;

-  public void bar (void) {

-    a = 0;

-  }

-};

-EOF

-])

-dnl Parse the compiler output and extract the necessary

-dnl objects, libraries and library flags.

-if AC_TRY_EVAL(ac_compile); then

-  # Parse the compiler output and extract the necessary

-  # objects, libraries and library flags.

-

-  # Sentinel used to keep track of whether or not we are before

-  # the conftest object file.

-  pre_test_object_deps_done=no

-

-  # The `*' in the case matches for architectures that use `case' in

-  # $output_verbose_cmd can trigger glob expansion during the loop

-  # eval without this substitution.

-  output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`"

-

-  for p in `eval $output_verbose_link_cmd`; do

-    case $p in

-

-    -L* | -R* | -l*)

-       # Some compilers place space between "-{L,R}" and the path.

-       # Remove the space.

-       if test $p = "-L" \

-          || test $p = "-R"; then

-         prev=$p

-         continue

-       else

-         prev=

-       fi

-

-       if test "$pre_test_object_deps_done" = no; then

-         case $p in

-         -L* | -R*)

-           # Internal compiler library paths should come after those

-           # provided the user.  The postdeps already come after the

-           # user supplied libs so there is no need to process them.

-           if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then

-             _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"

-           else

-             _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"

-           fi

-           ;;

-         # The "-l" case would never come before the object being

-         # linked, so don't bother handling this case.

-         esac

-       else

-         if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then

-           _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"

-         else

-           _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"

-         fi

-       fi

-       ;;

-

-    *.$objext)

-       # This assumes that the test object file only shows up

-       # once in the compiler output.

-       if test "$p" = "conftest.$objext"; then

-         pre_test_object_deps_done=yes

-         continue

-       fi

-

-       if test "$pre_test_object_deps_done" = no; then

-         if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then

-           _LT_AC_TAGVAR(predep_objects, $1)="$p"

-         else

-           _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"

-         fi

-       else

-         if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then

-           _LT_AC_TAGVAR(postdep_objects, $1)="$p"

-         else

-           _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"

-         fi

-       fi

-       ;;

-

-    *) ;; # Ignore the rest.

-

-    esac

-  done

-

-  # Clean up.

-  rm -f a.out a.exe

-else

-  echo "libtool.m4: error: problem compiling $1 test program"

-fi

-

-$rm -f confest.$objext

-

-case " $_LT_AC_TAGVAR(postdeps, $1) " in

-*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;

-esac

-])# AC_LIBTOOL_POSTDEP_PREDEP

-

-# AC_LIBTOOL_LANG_F77_CONFIG

-# ------------------------

-# Ensure that the configuration vars for the C compiler are

-# suitably defined.  Those variables are subsequently used by

-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.

-AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])

-AC_DEFUN([_LT_AC_LANG_F77_CONFIG],

-[AC_REQUIRE([AC_PROG_F77])

-AC_LANG_PUSH(Fortran 77)

-

-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no

-_LT_AC_TAGVAR(allow_undefined_flag, $1)=

-_LT_AC_TAGVAR(always_export_symbols, $1)=no

-_LT_AC_TAGVAR(archive_expsym_cmds, $1)=

-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=

-_LT_AC_TAGVAR(hardcode_direct, $1)=no

-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=

-_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=

-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=

-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no

-_LT_AC_TAGVAR(hardcode_automatic, $1)=no

-_LT_AC_TAGVAR(module_cmds, $1)=

-_LT_AC_TAGVAR(module_expsym_cmds, $1)=

-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown

-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds

-_LT_AC_TAGVAR(no_undefined_flag, $1)=

-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=

-_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no

-

-# Source file extension for f77 test sources.

-ac_ext=f

-

-# Object file extension for compiled f77 test sources.

-objext=o

-_LT_AC_TAGVAR(objext, $1)=$objext

-

-# Code to be used in simple compile tests

-lt_simple_compile_test_code="      subroutine t\n      return\n      end\n"

-

-# Code to be used in simple link tests

-lt_simple_link_test_code="      program t\n      end\n"

-

-# ltmain only uses $CC for tagged configurations so make sure $CC is set.

-_LT_AC_SYS_COMPILER

-

-# Allow CC to be a program name with arguments.

-lt_save_CC="$CC"

-CC=${F77-"f77"}

-compiler=$CC

-_LT_AC_TAGVAR(compiler, $1)=$CC

-cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`

-

-AC_MSG_CHECKING([if libtool supports shared libraries])

-AC_MSG_RESULT([$can_build_shared])

-

-AC_MSG_CHECKING([whether to build shared libraries])

-test "$can_build_shared" = "no" && enable_shared=no

-

-# On AIX, shared libraries and static libraries use the same namespace, and

-# are all built from PIC.

-case "$host_os" in

-aix3*)

-  test "$enable_shared" = yes && enable_static=no

-  if test -n "$RANLIB"; then

-    archive_cmds="$archive_cmds~\$RANLIB \$lib"

-    postinstall_cmds='$RANLIB $lib'

-  fi

-  ;;

-aix4* | aix5*)

-  test "$enable_shared" = yes && enable_static=no

-  ;;

-esac

-AC_MSG_RESULT([$enable_shared])

-

-AC_MSG_CHECKING([whether to build static libraries])

-# Make sure either enable_shared or enable_static is yes.

-test "$enable_shared" = yes || enable_static=yes

-AC_MSG_RESULT([$enable_static])

-

-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no

-

-_LT_AC_TAGVAR(GCC, $1)="$G77"

-_LT_AC_TAGVAR(LD, $1)="$LD"

-

-AC_LIBTOOL_PROG_COMPILER_PIC($1)

-AC_LIBTOOL_PROG_CC_C_O($1)

-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)

-AC_LIBTOOL_PROG_LD_SHLIBS($1)

-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)

-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)

-AC_LIBTOOL_SYS_LIB_STRIP

-

-

-AC_LIBTOOL_CONFIG($1)

-

-AC_LANG_POP

-CC="$lt_save_CC"

-])# AC_LIBTOOL_LANG_F77_CONFIG

-

-

-# AC_LIBTOOL_LANG_GCJ_CONFIG

-# --------------------------

-# Ensure that the configuration vars for the C compiler are

-# suitably defined.  Those variables are subsequently used by

-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.

-AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])

-AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],

-[AC_LANG_SAVE

-

-# Source file extension for Java test sources.

-ac_ext=java

-

-# Object file extension for compiled Java test sources.

-objext=o

-_LT_AC_TAGVAR(objext, $1)=$objext

-

-# Code to be used in simple compile tests

-lt_simple_compile_test_code="class foo {}\n"

-

-# Code to be used in simple link tests

-lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n'

-

-# ltmain only uses $CC for tagged configurations so make sure $CC is set.

-_LT_AC_SYS_COMPILER

-

-# Allow CC to be a program name with arguments.

-lt_save_CC="$CC"

-CC=${GCJ-"gcj"}

-compiler=$CC

-_LT_AC_TAGVAR(compiler, $1)=$CC

-

-# GCJ did not exist at the time GCC didn't implicitly link libc in.

-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no

-

-## CAVEAT EMPTOR:

-## There is no encapsulation within the following macros, do not change

-## the running order or otherwise move them around unless you know exactly

-## what you are doing...

-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)

-AC_LIBTOOL_PROG_COMPILER_PIC($1)

-AC_LIBTOOL_PROG_CC_C_O($1)

-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)

-AC_LIBTOOL_PROG_LD_SHLIBS($1)

-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)

-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)

-AC_LIBTOOL_SYS_LIB_STRIP

-AC_LIBTOOL_DLOPEN_SELF($1)

-

-AC_LIBTOOL_CONFIG($1)

-

-AC_LANG_RESTORE

-CC="$lt_save_CC"

-])# AC_LIBTOOL_LANG_GCJ_CONFIG

-

-

-# AC_LIBTOOL_LANG_RC_CONFIG

-# --------------------------

-# Ensure that the configuration vars for the Windows resource compiler are

-# suitably defined.  Those variables are subsequently used by

-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.

-AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])

-AC_DEFUN([_LT_AC_LANG_RC_CONFIG],

-[AC_LANG_SAVE

-

-# Source file extension for RC test sources.

-ac_ext=rc

-

-# Object file extension for compiled RC test sources.

-objext=o

-_LT_AC_TAGVAR(objext, $1)=$objext

-

-# Code to be used in simple compile tests

-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'

-

-# Code to be used in simple link tests

-lt_simple_link_test_code="$lt_simple_compile_test_code"

-

-# ltmain only uses $CC for tagged configurations so make sure $CC is set.

-_LT_AC_SYS_COMPILER

-

-# Allow CC to be a program name with arguments.

-lt_save_CC="$CC"

-CC=${RC-"windres"}

-compiler=$CC

-_LT_AC_TAGVAR(compiler, $1)=$CC

-_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes

-

-AC_LIBTOOL_CONFIG($1)

-

-AC_LANG_RESTORE

-CC="$lt_save_CC"

-])# AC_LIBTOOL_LANG_RC_CONFIG

-

-

-# AC_LIBTOOL_CONFIG([TAGNAME])

-# ----------------------------

-# If TAGNAME is not passed, then create an initial libtool script

-# with a default configuration from the untagged config vars.  Otherwise

-# add code to config.status for appending the configuration named by

-# TAGNAME from the matching tagged config vars.

-AC_DEFUN([AC_LIBTOOL_CONFIG],

-[# The else clause should only fire when bootstrapping the

-# libtool distribution, otherwise you forgot to ship ltmain.sh

-# with your package, and you will get complaints that there are

-# no rules to generate ltmain.sh.

-if test -f "$ltmain"; then

-  # See if we are running on zsh, and set the options which allow our commands through

-  # without removal of \ escapes.

-  if test -n "${ZSH_VERSION+set}" ; then

-    setopt NO_GLOB_SUBST

-  fi

-  # Now quote all the things that may contain metacharacters while being

-  # careful not to overquote the AC_SUBSTed values.  We take copies of the

-  # variables and quote the copies for generation of the libtool script.

-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \

-    SED SHELL STRIP \

-    libname_spec library_names_spec soname_spec extract_expsyms_cmds \

-    old_striplib striplib file_magic_cmd finish_cmds finish_eval \

-    deplibs_check_method reload_flag reload_cmds need_locks \

-    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \

-    lt_cv_sys_global_symbol_to_c_name_address \

-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \

-    old_postinstall_cmds old_postuninstall_cmds \

-    _LT_AC_TAGVAR(compiler, $1) \

-    _LT_AC_TAGVAR(CC, $1) \

-    _LT_AC_TAGVAR(LD, $1) \

-    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \

-    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \

-    _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \

-    _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \

-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \

-    _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \

-    _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \

-    _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \

-    _LT_AC_TAGVAR(old_archive_cmds, $1) \

-    _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \

-    _LT_AC_TAGVAR(predep_objects, $1) \

-    _LT_AC_TAGVAR(postdep_objects, $1) \

-    _LT_AC_TAGVAR(predeps, $1) \

-    _LT_AC_TAGVAR(postdeps, $1) \

-    _LT_AC_TAGVAR(compiler_lib_search_path, $1) \

-    _LT_AC_TAGVAR(archive_cmds, $1) \

-    _LT_AC_TAGVAR(archive_expsym_cmds, $1) \

-    _LT_AC_TAGVAR(postinstall_cmds, $1) \

-    _LT_AC_TAGVAR(postuninstall_cmds, $1) \

-    _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \

-    _LT_AC_TAGVAR(allow_undefined_flag, $1) \

-    _LT_AC_TAGVAR(no_undefined_flag, $1) \

-    _LT_AC_TAGVAR(export_symbols_cmds, $1) \

-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \

-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \

-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \

-    _LT_AC_TAGVAR(hardcode_automatic, $1) \

-    _LT_AC_TAGVAR(module_cmds, $1) \

-    _LT_AC_TAGVAR(module_expsym_cmds, $1) \

-    _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \

-    _LT_AC_TAGVAR(exclude_expsyms, $1) \

-    _LT_AC_TAGVAR(include_expsyms, $1); do

-

-    case $var in

-    _LT_AC_TAGVAR(old_archive_cmds, $1) | \

-    _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \

-    _LT_AC_TAGVAR(archive_cmds, $1) | \

-    _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \

-    _LT_AC_TAGVAR(module_cmds, $1) | \

-    _LT_AC_TAGVAR(module_expsym_cmds, $1) | \

-    _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \

-    _LT_AC_TAGVAR(export_symbols_cmds, $1) | \

-    extract_expsyms_cmds | reload_cmds | finish_cmds | \

-    postinstall_cmds | postuninstall_cmds | \

-    old_postinstall_cmds | old_postuninstall_cmds | \

-    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)

-      # Double-quote double-evaled strings.

-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""

-      ;;

-    *)

-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""

-      ;;

-    esac

-  done

-

-  case $lt_echo in

-  *'\[$]0 --fallback-echo"')

-    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`

-    ;;

-  esac

-

-ifelse([$1], [],

-  [cfgfile="${ofile}T"

-  trap "$rm \"$cfgfile\"; exit 1" 1 2 15

-  $rm -f "$cfgfile"

-  AC_MSG_NOTICE([creating $ofile])],

-  [cfgfile="$ofile"])

-

-  cat <<__EOF__ >> "$cfgfile"

-ifelse([$1], [],

-[#! $SHELL

-

-# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.

-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)

-# NOTE: Changes made to this file will be lost: look at ltmain.sh.

-#

-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001

-# Free Software Foundation, Inc.

-#

-# This file is part of GNU Libtool:

-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996

-#

-# This program is free software; you can redistribute it and/or modify

-# it under the terms of the GNU General Public License as published by

-# the Free Software Foundation; either version 2 of the License, or

-# (at your option) any later version.

-#

-# This program is distributed in the hope that it will be useful, but

-# WITHOUT ANY WARRANTY; without even the implied warranty of

-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU

-# General Public License for more details.

-#

-# You should have received a copy of the GNU General Public License

-# along with this program; if not, write to the Free Software

-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.

-#

-# As a special exception to the GNU General Public License, if you

-# distribute this file as part of a program that contains a

-# configuration script generated by Autoconf, you may include it under

-# the same distribution terms that you use for the rest of that program.

-

-# A sed program that does not truncate output.

-SED=$lt_SED

-

-# Sed that helps us avoid accidentally triggering echo(1) options like -n.

-Xsed="$SED -e s/^X//"

-

-# The HP-UX ksh and POSIX shell print the target directory to stdout

-# if CDPATH is set.

-if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi

-

-# The names of the tagged configurations supported by this script.

-available_tags=

-

-# ### BEGIN LIBTOOL CONFIG],

-[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])

-

-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:

-

-# Shell to use when invoking shell scripts.

-SHELL=$lt_SHELL

-

-# Whether or not to build shared libraries.

-build_libtool_libs=$enable_shared

-

-# Whether or not to build static libraries.

-build_old_libs=$enable_static

-

-# Whether or not to add -lc for building shared libraries.

-build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)

-

-# Whether or not to disallow shared libs when runtime libs are static

-allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)

-

-# Whether or not to optimize for fast installation.

-fast_install=$enable_fast_install

-

-# The host system.

-host_alias=$host_alias

-host=$host

-

-# An echo program that does not interpret backslashes.

-echo=$lt_echo

-

-# The archiver.

-AR=$lt_AR

-AR_FLAGS=$lt_AR_FLAGS

-

-# A C compiler.

-LTCC=$lt_LTCC

-

-# A language-specific compiler.

-CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)

-

-# Is the compiler the GNU C compiler?

-with_gcc=$_LT_AC_TAGVAR(GCC, $1)

-

-# An ERE matcher.

-EGREP=$lt_EGREP

-

-# The linker used to build libraries.

-LD=$lt_[]_LT_AC_TAGVAR(LD, $1)

-

-# Whether we need hard or soft links.

-LN_S=$lt_LN_S

-

-# A BSD-compatible nm program.

-NM=$lt_NM

-

-# A symbol stripping program

-STRIP=$lt_STRIP

-

-# Used to examine libraries when file_magic_cmd begins "file"

-MAGIC_CMD=$MAGIC_CMD

-

-# Used on cygwin: DLL creation program.

-DLLTOOL="$DLLTOOL"

-

-# Used on cygwin: object dumper.

-OBJDUMP="$OBJDUMP"

-

-# Used on cygwin: assembler.

-AS="$AS"

-

-# The name of the directory that contains temporary libtool files.

-objdir=$objdir

-

-# How to create reloadable object files.

-reload_flag=$lt_reload_flag

-reload_cmds=$lt_reload_cmds

-

-# How to pass a linker flag through the compiler.

-wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)

-

-# Object file suffix (normally "o").

-objext="$ac_objext"

-

-# Old archive suffix (normally "a").

-libext="$libext"

-

-# Shared library suffix (normally ".so").

-shrext_cmds='$shrext_cmds'

-

-# Executable file suffix (normally "").

-exeext="$exeext"

-

-# Additional compiler flags for building library objects.

-pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)

-pic_mode=$pic_mode

-

-# What is the maximum length of a command?

-max_cmd_len=$lt_cv_sys_max_cmd_len

-

-# Does compiler simultaneously support -c and -o options?

-compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)

-

-# Must we lock files when doing compilation ?

-need_locks=$lt_need_locks

-

-# Do we need the lib prefix for modules?

-need_lib_prefix=$need_lib_prefix

-

-# Do we need a version for libraries?

-need_version=$need_version

-

-# Whether dlopen is supported.

-dlopen_support=$enable_dlopen

-

-# Whether dlopen of programs is supported.

-dlopen_self=$enable_dlopen_self

-

-# Whether dlopen of statically linked programs is supported.

-dlopen_self_static=$enable_dlopen_self_static

-

-# Compiler flag to prevent dynamic linking.

-link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)

-

-# Compiler flag to turn off builtin functions.

-no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)

-

-# Compiler flag to allow reflexive dlopens.

-export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)

-

-# Compiler flag to generate shared objects directly from archives.

-whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)

-

-# Compiler flag to generate thread-safe objects.

-thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)

-

-# Library versioning type.

-version_type=$version_type

-

-# Format of library name prefix.

-libname_spec=$lt_libname_spec

-

-# List of archive names.  First name is the real one, the rest are links.

-# The last name is the one that the linker finds with -lNAME.

-library_names_spec=$lt_library_names_spec

-

-# The coded name of the library, if different from the real name.

-soname_spec=$lt_soname_spec

-

-# Commands used to build and install an old-style archive.

-RANLIB=$lt_RANLIB

-old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)

-old_postinstall_cmds=$lt_old_postinstall_cmds

-old_postuninstall_cmds=$lt_old_postuninstall_cmds

-

-# Create an old-style archive from a shared archive.

-old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)

-

-# Create a temporary old-style archive to link instead of a shared archive.

-old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)

-

-# Commands used to build and install a shared archive.

-archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)

-archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)

-postinstall_cmds=$lt_postinstall_cmds

-postuninstall_cmds=$lt_postuninstall_cmds

-

-# Commands used to build a loadable module (assumed same as above if empty)

-module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)

-module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)

-

-# Commands to strip libraries.

-old_striplib=$lt_old_striplib

-striplib=$lt_striplib

-

-# Dependencies to place before the objects being linked to create a

-# shared library.

-predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)

-

-# Dependencies to place after the objects being linked to create a

-# shared library.

-postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)

-

-# Dependencies to place before the objects being linked to create a

-# shared library.

-predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)

-

-# Dependencies to place after the objects being linked to create a

-# shared library.

-postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)

-

-# The library search path used internally by the compiler when linking

-# a shared library.

-compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)

-

-# Method to check whether dependent libraries are shared objects.

-deplibs_check_method=$lt_deplibs_check_method

-

-# Command to use when deplibs_check_method == file_magic.

-file_magic_cmd=$lt_file_magic_cmd

-

-# Flag that allows shared libraries with undefined symbols to be built.

-allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)

-

-# Flag that forces no undefined symbols.

-no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)

-

-# Commands used to finish a libtool library installation in a directory.

-finish_cmds=$lt_finish_cmds

-

-# Same as above, but a single script fragment to be evaled but not shown.

-finish_eval=$lt_finish_eval

-

-# Take the output of nm and produce a listing of raw symbols and C names.

-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe

-

-# Transform the output of nm in a proper C declaration

-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl

-

-# Transform the output of nm in a C name address pair

-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address

-

-# This is the shared library runtime path variable.

-runpath_var=$runpath_var

-

-# This is the shared library path variable.

-shlibpath_var=$shlibpath_var

-

-# Is shlibpath searched before the hard-coded library search path?

-shlibpath_overrides_runpath=$shlibpath_overrides_runpath

-

-# How to hardcode a shared library path into an executable.

-hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)

-

-# Whether we should hardcode library paths into libraries.

-hardcode_into_libs=$hardcode_into_libs

-

-# Flag to hardcode \$libdir into a binary during linking.

-# This must work even if \$libdir does not exist.

-hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)

-

-# If ld is used when linking, flag to hardcode \$libdir into

-# a binary during linking. This must work even if \$libdir does

-# not exist.

-hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)

-

-# Whether we need a single -rpath flag with a separated argument.

-hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)

-

-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the

-# resulting binary.

-hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)

-

-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the

-# resulting binary.

-hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)

-

-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into

-# the resulting binary.

-hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)

-

-# Set to yes if building a shared library automatically hardcodes DIR into the library

-# and all subsequent libraries and executables linked against it.

-hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)

-

-# Variables whose values should be saved in libtool wrapper scripts and

-# restored at relink time.

-variables_saved_for_relink="$variables_saved_for_relink"

-

-# Whether libtool must link a program against all its dependency libraries.

-link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)

-

-# Compile-time system search path for libraries

-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec

-

-# Run-time system search path for libraries

-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec

-

-# Fix the shell variable \$srcfile for the compiler.

-fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)"

-

-# Set to yes if exported symbols are required.

-always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)

-

-# The commands to list exported symbols.

-export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)

-

-# The commands to extract the exported symbol list from a shared archive.

-extract_expsyms_cmds=$lt_extract_expsyms_cmds

-

-# Symbols that should not be listed in the preloaded symbols.

-exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)

-

-# Symbols that must always be exported.

-include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)

-

-ifelse([$1],[],

-[# ### END LIBTOOL CONFIG],

-[# ### END LIBTOOL TAG CONFIG: $tagname])

-

-__EOF__

-

-ifelse([$1],[], [

-  case $host_os in

-  aix3*)

-    cat <<\EOF >> "$cfgfile"

-

-# AIX sometimes has problems with the GCC collect2 program.  For some

-# reason, if we set the COLLECT_NAMES environment variable, the problems

-# vanish in a puff of smoke.

-if test "X${COLLECT_NAMES+set}" != Xset; then

-  COLLECT_NAMES=

-  export COLLECT_NAMES

-fi

-EOF

-    ;;

-  esac

-

-  # We use sed instead of cat because bash on DJGPP gets confused if

-  # if finds mixed CR/LF and LF-only lines.  Since sed operates in

-  # text mode, it properly converts lines to CR/LF.  This bash problem

-  # is reportedly fixed, but why not run on old versions too?

-  sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)

-

-  mv -f "$cfgfile" "$ofile" || \

-    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")

-  chmod +x "$ofile"

-])

-else

-  # If there is no Makefile yet, we rely on a make rule to execute

-  # `config.status --recheck' to rerun these tests and create the

-  # libtool script then.

-  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`

-  if test -f "$ltmain_in"; then

-    test -f Makefile && make "$ltmain"

-  fi

-fi

-])# AC_LIBTOOL_CONFIG

-

-

-# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])

-# -------------------------------------------

-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],

-[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl

-

-_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=

-

-if test "$GCC" = yes; then

-  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'

-

-  AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],

-    lt_cv_prog_compiler_rtti_exceptions,

-    [-fno-rtti -fno-exceptions], [],

-    [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])

-fi

-])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI

-

-

-# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE

-# ---------------------------------

-AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],

-[AC_REQUIRE([AC_CANONICAL_HOST])

-AC_REQUIRE([AC_PROG_NM])

-AC_REQUIRE([AC_OBJEXT])

-# Check for command to grab the raw symbol name followed by C symbol from nm.

-AC_MSG_CHECKING([command to parse $NM output from $compiler object])

-AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],

-[

-# These are sane defaults that work on at least a few old systems.

-# [They come from Ultrix.  What could be older than Ultrix?!! ;)]

-

-# Character class describing NM global symbol codes.

-symcode='[[BCDEGRST]]'

-

-# Regexp to match symbols that can be accessed directly from C.

-sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'

-

-# Transform the above into a raw symbol and a C symbol.

-symxfrm='\1 \2\3 \3'

-

-# Transform an extracted symbol line into a proper C declaration

-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"

-

-# Transform an extracted symbol line into symbol name and symbol address

-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"

-

-# Define system-specific variables.

-case $host_os in

-aix*)

-  symcode='[[BCDT]]'

-  ;;

-cygwin* | mingw* | pw32*)

-  symcode='[[ABCDGISTW]]'

-  ;;

-hpux*) # Its linker distinguishes data from code symbols

-  if test "$host_cpu" = ia64; then

-    symcode='[[ABCDEGRST]]'

-  fi

-  lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"

-  lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"

-  ;;

-irix* | nonstopux*)

-  symcode='[[BCDEGRST]]'

-  ;;

-osf*)

-  symcode='[[BCDEGQRST]]'

-  ;;

-solaris* | sysv5*)

-  symcode='[[BDRT]]'

-  ;;

-sysv4)

-  symcode='[[DFNSTU]]'

-  ;;

-esac

-

-# Handle CRLF in mingw tool chain

-opt_cr=

-case $build_os in

-mingw*)

-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp

-  ;;

-esac

-

-# If we're using GNU nm, then use its standard symbol codes.

-case `$NM -V 2>&1` in

-*GNU* | *'with BFD'*)

-  symcode='[[ABCDGIRSTW]]' ;;

-esac

-

-# Try without a prefix undercore, then with it.

-for ac_symprfx in "" "_"; do

-

-  # Write the raw and C identifiers.

-  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[      ]]\($symcode$symcode*\)[[       ]][[    ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"

-

-  # Check to see that the pipe works correctly.

-  pipe_works=no

-

-  rm -f conftest*

-  cat > conftest.$ac_ext <<EOF

-#ifdef __cplusplus

-extern "C" {

-#endif

-char nm_test_var;

-void nm_test_func(){}

-#ifdef __cplusplus

-}

-#endif

-int main(){nm_test_var='a';nm_test_func();return(0);}

-EOF

-

-  if AC_TRY_EVAL(ac_compile); then

-    # Now try to grab the symbols.

-    nlist=conftest.nm

-    if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then

-      # Try sorting and uniquifying the output.

-      if sort "$nlist" | uniq > "$nlist"T; then

-        mv -f "$nlist"T "$nlist"

-      else

-        rm -f "$nlist"T

-      fi

-

-      # Make sure that we snagged all the symbols we need.

-      if grep ' nm_test_var$' "$nlist" >/dev/null; then

-        if grep ' nm_test_func$' "$nlist" >/dev/null; then

-          cat <<EOF > conftest.$ac_ext

-#ifdef __cplusplus

-extern "C" {

-#endif

-

-EOF

-          # Now generate the symbol file.

-          eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'

-

-          cat <<EOF >> conftest.$ac_ext

-#if defined (__STDC__) && __STDC__

-# define lt_ptr_t void *

-#else

-# define lt_ptr_t char *

-# define const

-#endif

-

-/* The mapping between symbol names and symbols. */

-const struct {

-  const char *name;

-  lt_ptr_t address;

-}

-lt_preloaded_symbols[[]] =

-{

-EOF

-          $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext

-          cat <<\EOF >> conftest.$ac_ext

-  {0, (lt_ptr_t) 0}

-};

-

-#ifdef __cplusplus

-}

-#endif

-EOF

-          # Now try linking the two files.

-          mv conftest.$ac_objext conftstm.$ac_objext

-          lt_save_LIBS="$LIBS"

-          lt_save_CFLAGS="$CFLAGS"

-          LIBS="conftstm.$ac_objext"

-          CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"

-          if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then

-            pipe_works=yes

-          fi

-          LIBS="$lt_save_LIBS"

-          CFLAGS="$lt_save_CFLAGS"

-        else

-          echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD

-        fi

-      else

-        echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD

-      fi

-    else

-      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD

-    fi

-  else

-    echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD

-    cat conftest.$ac_ext >&5

-  fi

-  rm -f conftest* conftst*

-

-  # Do not use the global_symbol_pipe unless it works.

-  if test "$pipe_works" = yes; then

-    break

-  else

-    lt_cv_sys_global_symbol_pipe=

-  fi

-done

-])

-if test -z "$lt_cv_sys_global_symbol_pipe"; then

-  lt_cv_sys_global_symbol_to_cdecl=

-fi

-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then

-  AC_MSG_RESULT(failed)

-else

-  AC_MSG_RESULT(ok)

-fi

-]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE

-

-

-# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])

-# ---------------------------------------

-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],

-[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=

-_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=

-_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=

-

-AC_MSG_CHECKING([for $compiler option to produce PIC])

- ifelse([$1],[CXX],[

-  # C++ specific cases for pic, static, wl, etc.

-  if test "$GXX" = yes; then

-    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'

-    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'

-

-    case $host_os in

-    aix*)

-      # All AIX code is PIC.

-      if test "$host_cpu" = ia64; then

-        # AIX 5 now supports IA64 processor

-        _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'

-      fi

-      ;;

-    amigaos*)

-      # FIXME: we need at least 68020 code to build shared libraries, but

-      # adding the `-m68020' flag to GCC prevents building anything better,

-      # like `-m68040'.

-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'

-      ;;

-    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)

-      # PIC is the default for these OSes.

-      ;;

-    mingw* | os2* | pw32*)

-      # This hack is so that the source file can tell whether it is being

-      # built for inclusion in a dll (and should export symbols for example).

-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'

-      ;;

-    darwin* | rhapsody*)

-      # PIC is the default on this platform

-      # Common symbols not allowed in MH_DYLIB files

-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'

-      ;;

-    *djgpp*)

-      # DJGPP does not support shared libraries at all

-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=

-      ;;

-    sysv4*MP*)

-      if test -d /usr/nec; then

-        _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic

-      fi

-      ;;

-    hpux*)

-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but

-      # not for PA HP-UX.

-      case "$host_cpu" in

-      hppa*64*|ia64*)

-        ;;

-      *)

-        _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'

-        ;;

-      esac

-      ;;

-    *)

-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'

-      ;;

-    esac

-  else

-    case $host_os in

-      aix4* | aix5*)

-        # All AIX code is PIC.

-        if test "$host_cpu" = ia64; then

-          # AIX 5 now supports IA64 processor

-          _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'

-        else

-          _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'

-        fi

-        ;;

-      chorus*)

-        case $cc_basename in

-        cxch68)

-          # Green Hills C++ Compiler

-          # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"

-          ;;

-        esac

-        ;;

-      dgux*)

-        case $cc_basename in

-          ec++)

-            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'

-            ;;

-          ghcx)

-            # Green Hills C++ Compiler

-            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'

-            ;;

-          *)

-            ;;

-        esac

-        ;;

-      freebsd* | kfreebsd*-gnu)

-        # FreeBSD uses GNU C++

-        ;;

-      hpux9* | hpux10* | hpux11*)

-        case $cc_basename in

-          CC)

-            _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'

-            _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"

-            if test "$host_cpu" != ia64; then

-              _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'

-            fi

-            ;;

-          aCC)

-            _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'

-            _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"

-            case "$host_cpu" in

-            hppa*64*|ia64*)

-              # +Z the default

-              ;;

-            *)

-              _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'

-              ;;

-            esac

-            ;;

-          *)

-            ;;

-        esac

-        ;;

-      irix5* | irix6* | nonstopux*)

-        case $cc_basename in

-          CC)

-            _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'

-            _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'

-            # CC pic flag -KPIC is the default.

-            ;;

-          *)

-            ;;

-        esac

-        ;;

-      linux*)

-        case $cc_basename in

-          KCC)

-            # KAI C++ Compiler

-            _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'

-            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'

-            ;;

-          icpc)

-            # Intel C++

-            _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'

-            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'

-            _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'

-            ;;

-          cxx)

-            # Compaq C++

-            # Make sure the PIC flag is empty.  It appears that all Alpha

-            # Linux and Compaq Tru64 Unix objects are PIC.

-            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=

-            _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'

-            ;;

-          *)

-            ;;

-        esac

-        ;;

-      lynxos*)

-        ;;

-      m88k*)

-        ;;

-      mvs*)

-        case $cc_basename in

-          cxx)

-            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'

-            ;;

-          *)

-            ;;

-        esac

-        ;;

-      netbsd* | knetbsd*-gnu)

-        ;;

-      osf3* | osf4* | osf5*)

-        case $cc_basename in

-          KCC)

-            _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'

-            ;;

-          RCC)

-            # Rational C++ 2.4.1

-            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'

-            ;;

-          cxx)

-            # Digital/Compaq C++

-            _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'

-            # Make sure the PIC flag is empty.  It appears that all Alpha

-            # Linux and Compaq Tru64 Unix objects are PIC.

-            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=

-            _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'

-            ;;

-          *)

-            ;;

-        esac

-        ;;

-      psos*)

-        ;;

-      sco*)

-        case $cc_basename in

-          CC)

-            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'

-            ;;

-          *)

-            ;;

-        esac

-        ;;

-      solaris*)

-        case $cc_basename in

-          CC)

-            # Sun C++ 4.2, 5.x and Centerline C++

-            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'

-            _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'

-            _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '

-            ;;

-          gcx)

-            # Green Hills C++ Compiler

-            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'

-            ;;

-          *)

-            ;;

-        esac

-        ;;

-      sunos4*)

-        case $cc_basename in

-          CC)

-            # Sun C++ 4.x

-            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'

-            _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'

-            ;;

-          lcc)

-            # Lucid

-            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'

-            ;;

-          *)

-            ;;

-        esac

-        ;;

-      tandem*)

-        case $cc_basename in

-          NCC)

-            # NonStop-UX NCC 3.20

-            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'

-            ;;

-          *)

-            ;;

-        esac

-        ;;

-      unixware*)

-        ;;

-      vxworks*)

-        ;;

-      *)

-        _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no

-        ;;

-    esac

-  fi

-],

-[

-  if test "$GCC" = yes; then

-    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'

-    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'

-

-    case $host_os in

-      aix*)

-      # All AIX code is PIC.

-      if test "$host_cpu" = ia64; then

-        # AIX 5 now supports IA64 processor

-        _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'

-      fi

-      ;;

-

-    amigaos*)

-      # FIXME: we need at least 68020 code to build shared libraries, but

-      # adding the `-m68020' flag to GCC prevents building anything better,

-      # like `-m68040'.

-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'

-      ;;

-

-    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)

-      # PIC is the default for these OSes.

-      ;;

-

-    mingw* | pw32* | os2*)

-      # This hack is so that the source file can tell whether it is being

-      # built for inclusion in a dll (and should export symbols for example).

-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'

-      ;;

-

-    darwin* | rhapsody*)

-      # PIC is the default on this platform

-      # Common symbols not allowed in MH_DYLIB files

-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'

-      ;;

-

-    msdosdjgpp*)

-      # Just because we use GCC doesn't mean we suddenly get shared libraries

-      # on systems that don't support them.

-      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no

-      enable_shared=no

-      ;;

-

-    sysv4*MP*)

-      if test -d /usr/nec; then

-        _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic

-      fi

-      ;;

-

-    hpux*)

-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but

-      # not for PA HP-UX.

-      case "$host_cpu" in

-      hppa*64*|ia64*)

-        # +Z the default

-        ;;

-      *)

-        _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'

-        ;;

-      esac

-      ;;

-

-    *)

-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'

-      ;;

-    esac

-  else

-    # PORTME Check for flag to pass linker flags through the system compiler.

-    case $host_os in

-    aix*)

-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'

-      if test "$host_cpu" = ia64; then

-        # AIX 5 now supports IA64 processor

-        _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'

-      else

-        _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'

-      fi

-      ;;

-

-    mingw* | pw32* | os2*)

-      # This hack is so that the source file can tell whether it is being

-      # built for inclusion in a dll (and should export symbols for example).

-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'

-      ;;

-

-    hpux9* | hpux10* | hpux11*)

-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'

-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but

-      # not for PA HP-UX.

-      case "$host_cpu" in

-      hppa*64*|ia64*)

-        # +Z the default

-        ;;

-      *)

-        _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'

-        ;;

-      esac

-      # Is there a better lt_prog_compiler_static that works with the bundled CC?

-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'

-      ;;

-

-    irix5* | irix6* | nonstopux*)

-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'

-      # PIC (with -KPIC) is the default.

-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'

-      ;;

-

-    newsos6)

-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'

-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'

-      ;;

-

-    linux*)

-      case $CC in

-      icc* | ecc*)

-        _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'

-        _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'

-        _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'

-        ;;

-      ccc*)

-        _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'

-        # All Alpha code is PIC.

-        _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'

-        ;;

-      esac

-      ;;

-

-    osf3* | osf4* | osf5*)

-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'

-      # All OSF/1 code is PIC.

-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'

-      ;;

-

-    sco3.2v5*)

-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic'

-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn'

-      ;;

-

-    solaris*)

-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'

-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'

-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'

-      ;;

-

-    sunos4*)

-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '

-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'

-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'

-      ;;

-

-    sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)

-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'

-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'

-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'

-      ;;

-

-    sysv4*MP*)

-      if test -d /usr/nec ;then

-        _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'

-        _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'

-      fi

-      ;;

-

-    uts4*)

-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'

-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'

-      ;;

-

-    *)

-      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no

-      ;;

-    esac

-  fi

-])

-AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])

-

-#

-# Check to make sure the PIC flag actually works.

-#

-if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then

-  AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],

-    _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1),

-    [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],

-    [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in

-     "" | " "*) ;;

-     *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;

-     esac],

-    [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=

-     _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])

-fi

-case "$host_os" in

-  # For platforms which do not support PIC, -DPIC is meaningless:

-  *djgpp*)

-    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=

-    ;;

-  *)

-    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"

-    ;;

-esac

-])

-

-

-# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])

-# ------------------------------------

-# See if the linker supports building shared libraries.

-AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],

-[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])

-ifelse([$1],[CXX],[

-  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'

-  case $host_os in

-  aix4* | aix5*)

-    # If we're using GNU nm, then we don't want the "-C" option.

-    # -C means demangle to AIX nm, but means don't demangle with GNU nm

-    if $NM -V 2>&1 | grep 'GNU' > /dev/null; then

-      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'

-    else

-      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'

-    fi

-    ;;

-  pw32*)

-    _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"

-  ;;

-  cygwin* | mingw*)

-    _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'

-  ;;

-  linux*)

-    _LT_AC_TAGVAR(link_all_deplibs, $1)=no

-  ;;

-  *)

-    _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'

-  ;;

-  esac

-],[

-  runpath_var=

-  _LT_AC_TAGVAR(allow_undefined_flag, $1)=

-  _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no

-  _LT_AC_TAGVAR(archive_cmds, $1)=

-  _LT_AC_TAGVAR(archive_expsym_cmds, $1)=

-  _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=

-  _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=

-  _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=

-  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=

-  _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=

-  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=

-  _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=

-  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=

-  _LT_AC_TAGVAR(hardcode_direct, $1)=no

-  _LT_AC_TAGVAR(hardcode_minus_L, $1)=no

-  _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported

-  _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown

-  _LT_AC_TAGVAR(hardcode_automatic, $1)=no

-  _LT_AC_TAGVAR(module_cmds, $1)=

-  _LT_AC_TAGVAR(module_expsym_cmds, $1)=

-  _LT_AC_TAGVAR(always_export_symbols, $1)=no

-  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'

-  # include_expsyms should be a list of space-separated symbols to be *always*

-  # included in the symbol list

-  _LT_AC_TAGVAR(include_expsyms, $1)=

-  # exclude_expsyms can be an extended regexp of symbols to exclude

-  # it will be wrapped by ` (' and `)$', so one must not match beginning or

-  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',

-  # as well as any symbol that contains `d'.

-  _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_"

-  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out

-  # platforms (ab)use it in PIC code, but their linkers get confused if

-  # the symbol is explicitly referenced.  Since portable code cannot

-  # rely on this symbol name, it's probably fine to never include it in

-  # preloaded symbol tables.

-  extract_expsyms_cmds=

-

-  case $host_os in

-  cygwin* | mingw* | pw32*)

-    # FIXME: the MSVC++ port hasn't been tested in a loooong time

-    # When not using gcc, we currently assume that we are using

-    # Microsoft Visual C++.

-    if test "$GCC" != yes; then

-      with_gnu_ld=no

-    fi

-    ;;

-  openbsd*)

-    with_gnu_ld=no

-    ;;

-  esac

-

-  _LT_AC_TAGVAR(ld_shlibs, $1)=yes

-  if test "$with_gnu_ld" = yes; then

-    # If archive_cmds runs LD, not CC, wlarc should be empty

-    wlarc='${wl}'

-

-    # See if GNU ld supports shared libraries.

-    case $host_os in

-    aix3* | aix4* | aix5*)

-      # On AIX/PPC, the GNU linker is very broken

-      if test "$host_cpu" != ia64; then

-        _LT_AC_TAGVAR(ld_shlibs, $1)=no

-        cat <<EOF 1>&2

-

-*** Warning: the GNU linker, at least up to release 2.9.1, is reported

-*** to be unable to reliably create shared libraries on AIX.

-*** Therefore, libtool is disabling shared libraries support.  If you

-*** really care for shared libraries, you may want to modify your PATH

-*** so that a non-GNU linker is found, and then restart.

-

-EOF

-      fi

-      ;;

-

-    amigaos*)

-      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'

-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'

-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes

-

-      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports

-      # that the semantics of dynamic libraries on AmigaOS, at least up

-      # to version 4, is to share data among multiple programs linked

-      # with the same dynamic library.  Since this doesn't match the

-      # behavior of shared libraries on other platforms, we can't use

-      # them.

-      _LT_AC_TAGVAR(ld_shlibs, $1)=no

-      ;;

-

-    beos*)

-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then

-        _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported

-        # Joseph Beckenbach <jrb3@best.com> says some releases of gcc

-        # support --undefined.  This deserves some investigation.  FIXME

-        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'

-      else

-        _LT_AC_TAGVAR(ld_shlibs, $1)=no

-      fi

-      ;;

-

-    cygwin* | mingw* | pw32*)

-      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,

-      # as there is no search path for DLLs.

-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'

-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported

-      _LT_AC_TAGVAR(always_export_symbols, $1)=no

-      _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes

-      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'

-

-      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then

-        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'

-        # If the export-symbols file already is a .def file (1st line

-        # is EXPORTS), use it as is; otherwise, prepend...

-        _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then

-          cp $export_symbols $output_objdir/$soname.def;

-        else

-          echo EXPORTS > $output_objdir/$soname.def;

-          cat $export_symbols >> $output_objdir/$soname.def;

-        fi~

-        $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000  ${wl}--out-implib,$lib'

-      else

-        ld_shlibs=no

-      fi

-      ;;

-

-    netbsd* | knetbsd*-gnu)

-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then

-        _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'

-        wlarc=

-      else

-        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'

-        _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'

-      fi

-      ;;

-

-    solaris* | sysv5*)

-      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then

-        _LT_AC_TAGVAR(ld_shlibs, $1)=no

-        cat <<EOF 1>&2

-

-*** Warning: The releases 2.8.* of the GNU linker cannot reliably

-*** create shared libraries on Solaris systems.  Therefore, libtool

-*** is disabling shared libraries support.  We urge you to upgrade GNU

-*** binutils to release 2.9.1 or newer.  Another option is to modify

-*** your PATH or compiler configuration so that the native linker is

-*** used, and then restart.

-

-EOF

-      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then

-        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'

-        _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'

-      else

-        _LT_AC_TAGVAR(ld_shlibs, $1)=no

-      fi

-      ;;

-

-    sunos4*)

-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'

-      wlarc=

-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes

-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no

-      ;;

-

-  linux*)

-    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then

-        tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'

-        _LT_AC_TAGVAR(archive_cmds, $1)="$tmp_archive_cmds"

-      supports_anon_versioning=no

-      case `$LD -v 2>/dev/null` in

-        *\ [01].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11

-        *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...

-        *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...

-        *\ 2.11.*) ;; # other 2.11 versions

-        *) supports_anon_versioning=yes ;;

-      esac

-      if test $supports_anon_versioning = yes; then

-        _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~

-cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~

-$echo "local: *; };" >> $output_objdir/$libname.ver~

-        $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'

-      else

-        _LT_AC_TAGVAR(archive_expsym_cmds, $1)="$tmp_archive_cmds"

-      fi

-      _LT_AC_TAGVAR(link_all_deplibs, $1)=no

-    else

-      _LT_AC_TAGVAR(ld_shlibs, $1)=no

-    fi

-    ;;

-

-    *)

-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then

-        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'

-        _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'

-      else

-        _LT_AC_TAGVAR(ld_shlibs, $1)=no

-      fi

-      ;;

-    esac

-

-    if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then

-      runpath_var=LD_RUN_PATH

-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'

-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'

-      # ancient GNU ld didn't support --whole-archive et. al.

-      if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then

-        _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'

-      else

-        _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=

-      fi

-    fi

-  else

-    # PORTME fill in a description of your system's linker (not GNU ld)

-    case $host_os in

-    aix3*)

-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported

-      _LT_AC_TAGVAR(always_export_symbols, $1)=yes

-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'

-      # Note: this linker hardcodes the directories in LIBPATH if there

-      # are no directories specified by -L.

-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes

-      if test "$GCC" = yes && test -z "$link_static_flag"; then

-        # Neither direct hardcoding nor static linking is supported with a

-        # broken collect2.

-        _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported

-      fi

-      ;;

-

-    aix4* | aix5*)

-      if test "$host_cpu" = ia64; then

-        # On IA64, the linker does run time linking by default, so we don't

-        # have to do anything special.

-        aix_use_runtimelinking=no

-        exp_sym_flag='-Bexport'

-        no_entry_flag=""

-      else

-        # If we're using GNU nm, then we don't want the "-C" option.

-        # -C means demangle to AIX nm, but means don't demangle with GNU nm

-        if $NM -V 2>&1 | grep 'GNU' > /dev/null; then

-          _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'

-        else

-          _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'

-        fi

-        aix_use_runtimelinking=no

-

-        # Test if we are trying to use run time linking or normal

-        # AIX style linking. If -brtl is somewhere in LDFLAGS, we

-        # need to do runtime linking.

-        case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)

-          for ld_flag in $LDFLAGS; do

-          if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then

-            aix_use_runtimelinking=yes

-            break

-          fi

-          done

-        esac

-

-        exp_sym_flag='-bexport'

-        no_entry_flag='-bnoentry'

-      fi

-

-      # When large executables or shared objects are built, AIX ld can

-      # have problems creating the table of contents.  If linking a library

-      # or program results in "error TOC overflow" add -mminimal-toc to

-      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not

-      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.

-

-      _LT_AC_TAGVAR(archive_cmds, $1)=''

-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes

-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'

-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes

-

-      if test "$GCC" = yes; then

-        case $host_os in aix4.[012]|aix4.[012].*)

-        # We only want to do this on AIX 4.2 and lower, the check

-        # below for broken collect2 doesn't work under 4.3+

-          collect2name=`${CC} -print-prog-name=collect2`

-          if test -f "$collect2name" && \

-           strings "$collect2name" | grep resolve_lib_name >/dev/null

-          then

-          # We have reworked collect2

-          _LT_AC_TAGVAR(hardcode_direct, $1)=yes

-          else

-          # We have old collect2

-          _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported

-          # It fails to find uninstalled libraries when the uninstalled

-          # path is not listed in the libpath.  Setting hardcode_minus_L

-          # to unsupported forces relinking

-          _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes

-          _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'

-          _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=

-          fi

-        esac

-        shared_flag='-shared'

-      else

-        # not using gcc

-        if test "$host_cpu" = ia64; then

-        # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release

-        # chokes on -Wl,-G. The following line is correct:

-          shared_flag='-G'

-        else

-        if test "$aix_use_runtimelinking" = yes; then

-            shared_flag='${wl}-G'

-          else

-            shared_flag='${wl}-bM:SRE'

-        fi

-        fi

-      fi

-

-      # It seems that -bexpall does not export symbols beginning with

-      # underscore (_), so it is better to generate a list of symbols to export.

-      _LT_AC_TAGVAR(always_export_symbols, $1)=yes

-      if test "$aix_use_runtimelinking" = yes; then

-        # Warning - without using the other runtime loading flags (-brtl),

-        # -berok will link without error, but may produce a broken library.

-        _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'

-       # Determine the default libpath from the value encoded in an empty executable.

-       _LT_AC_SYS_LIBPATH_AIX

-       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"

-        _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"

-       else

-        if test "$host_cpu" = ia64; then

-          _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'

-          _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"

-          _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"

-        else

-         # Determine the default libpath from the value encoded in an empty executable.

-         _LT_AC_SYS_LIBPATH_AIX

-         _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"

-          # Warning - without using the other run time loading flags,

-          # -berok will link without error, but may produce a broken library.

-          _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'

-          _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'

-          # -bexpall does not export symbols beginning with underscore (_)

-          _LT_AC_TAGVAR(always_export_symbols, $1)=yes

-          # Exported symbols can be pulled into shared objects from archives

-          _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '

-          _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes

-          # This is similar to how AIX traditionally builds it's shared libraries.

-          _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'

-        fi

-      fi

-      ;;

-

-    amigaos*)

-      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'

-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'

-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes

-      # see comment about different semantics on the GNU ld section

-      _LT_AC_TAGVAR(ld_shlibs, $1)=no

-      ;;

-

-    bsdi4*)

-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic

-      ;;

-

-    cygwin* | mingw* | pw32*)

-      # When not using gcc, we currently assume that we are using

-      # Microsoft Visual C++.

-      # hardcode_libdir_flag_spec is actually meaningless, as there is

-      # no search path for DLLs.

-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '

-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported

-      # Tell ltmain to make .lib files, not .a files.

-      libext=lib

-      # Tell ltmain to make .dll files, not .so files.

-      shrext_cmds=".dll"

-      # FIXME: Setting linknames here is a bad hack.

-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='

-      # The linker will automatically build a .lib file if we build a DLL.

-      _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'

-      # FIXME: Should let the user specify the lib program.

-      _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs'

-      fix_srcfile_path='`cygpath -w "$srcfile"`'

-      _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes

-      ;;

-

-    darwin* | rhapsody*)

-    if test "$GXX" = yes ; then

-      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no

-      case "$host_os" in

-      rhapsody* | darwin1.[[012]])

-        _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'

-        ;;

-      *) # Darwin 1.3 on

-      if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then

-        _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'

-      else

-        case ${MACOSX_DEPLOYMENT_TARGET} in

-          10.[[012]])

-            _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'

-            ;;

-          10.*)

-            _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup'

-            ;;

-        esac

-      fi

-        ;;

-      esac

-        lt_int_apple_cc_single_mod=no

-        output_verbose_link_cmd='echo'

-        if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then

-          lt_int_apple_cc_single_mod=yes

-        fi

-        if test "X$lt_int_apple_cc_single_mod" = Xyes ; then

-          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'

-        else

-        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'

-      fi

-      _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'

-      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's

-        if test "X$lt_int_apple_cc_single_mod" = Xyes ; then

-          _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'

-        else

-          _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'

-        fi

-          _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'

-      _LT_AC_TAGVAR(hardcode_direct, $1)=no

-      _LT_AC_TAGVAR(hardcode_automatic, $1)=yes

-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported

-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'

-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes

-    else

-      _LT_AC_TAGVAR(ld_shlibs, $1)=no

-    fi

-      ;;

-

-    dgux*)

-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'

-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'

-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no

-      ;;

-

-    freebsd1*)

-      _LT_AC_TAGVAR(ld_shlibs, $1)=no

-      ;;

-

-    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor

-    # support.  Future versions do this automatically, but an explicit c++rt0.o

-    # does not break anything, and helps significantly (at the cost of a little

-    # extra space).

-    freebsd2.2*)

-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'

-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'

-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes

-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no

-      ;;

-

-    # Unfortunately, older versions of FreeBSD 2 do not have this feature.

-    freebsd2*)

-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'

-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes

-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes

-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no

-      ;;

-

-    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.

-    freebsd* | kfreebsd*-gnu)

-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'

-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'

-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes

-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no

-      ;;

-

-    hpux9*)

-      if test "$GCC" = yes; then

-        _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'

-      else

-        _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'

-      fi

-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'

-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:

-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes

-

-      # hardcode_minus_L: Not really in the search PATH,

-      # but as the default location of the library.

-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes

-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'

-      ;;

-

-    hpux10* | hpux11*)

-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then

-        case "$host_cpu" in

-        hppa*64*|ia64*)

-          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'

-          ;;

-        *)

-          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'

-          ;;

-        esac

-      else

-        case "$host_cpu" in

-        hppa*64*|ia64*)

-          _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'

-          ;;

-        *)

-          _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'

-          ;;

-        esac

-      fi

-      if test "$with_gnu_ld" = no; then

-        case "$host_cpu" in

-        hppa*64*)

-          _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'

-          _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'

-          _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:

-          _LT_AC_TAGVAR(hardcode_direct, $1)=no

-          _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no

-          ;;

-        ia64*)

-          _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'

-          _LT_AC_TAGVAR(hardcode_direct, $1)=no

-          _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no

-

-          # hardcode_minus_L: Not really in the search PATH,

-          # but as the default location of the library.

-          _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes

-          ;;

-        *)

-          _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'

-          _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:

-          _LT_AC_TAGVAR(hardcode_direct, $1)=yes

-          _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'

-

-          # hardcode_minus_L: Not really in the search PATH,

-          # but as the default location of the library.

-          _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes

-          ;;

-        esac

-      fi

-      ;;

-

-    irix5* | irix6* | nonstopux*)

-      if test "$GCC" = yes; then

-        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'

-      else

-        _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'

-        _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'

-      fi

-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'

-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:

-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes

-      ;;

-

-    netbsd* | knetbsd*-gnu)

-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then

-        _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out

-      else

-        _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF

-      fi

-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'

-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes

-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no

-      ;;

-

-    newsos6)

-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'

-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes

-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'

-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:

-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no

-      ;;

-

-    openbsd*)

-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes

-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no

-      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then

-        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'

-        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'

-        _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'

-      else

-       case $host_os in

-         openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)

-           _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'

-           _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'

-           ;;

-         *)

-           _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'

-           _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'

-           ;;

-       esac

-      fi

-      ;;

-

-    os2*)

-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'

-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes

-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported

-      _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'

-      _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'

-      ;;

-

-    osf3*)

-      if test "$GCC" = yes; then

-        _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'

-        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'

-      else

-        _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'

-        _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'

-      fi

-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'

-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:

-      ;;

-

-    osf4* | osf5*)      # as osf3* with the addition of -msym flag

-      if test "$GCC" = yes; then

-        _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'

-        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'

-        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'

-      else

-        _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'

-        _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'

-        _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~

-        $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'

-

-        # Both c and cxx compiler support -rpath directly

-        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'

-      fi

-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:

-      ;;

-

-    sco3.2v5*)

-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'

-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no

-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'

-      runpath_var=LD_RUN_PATH

-      hardcode_runpath_var=yes

-      ;;

-

-    solaris*)

-      _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'

-      if test "$GCC" = yes; then

-        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'

-        _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~

-          $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'

-      else

-        _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'

-        _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~

-        $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'

-      fi

-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'

-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no

-      case $host_os in

-      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;

-      *) # Supported since Solaris 2.6 (maybe 2.5.1?)

-        _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;;

-      esac

-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes

-      ;;

-

-    sunos4*)

-      if test "x$host_vendor" = xsequent; then

-        # Use $CC to link under sequent, because it throws in some extra .o

-        # files that make .init and .fini sections work.

-        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'

-      else

-        _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'

-      fi

-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'

-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes

-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes

-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no

-      ;;

-

-    sysv4)

-      case $host_vendor in

-        sni)

-          _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'

-          _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???

-        ;;

-        siemens)

-          ## LD is ld it makes a PLAMLIB

-          ## CC just makes a GrossModule.

-          _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'

-          _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'

-          _LT_AC_TAGVAR(hardcode_direct, $1)=no

-        ;;

-        motorola)

-          _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'

-          _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie

-        ;;

-      esac

-      runpath_var='LD_RUN_PATH'

-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no

-      ;;

-

-    sysv4.3*)

-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'

-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no

-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'

-      ;;

-

-    sysv4*MP*)

-      if test -d /usr/nec; then

-        _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'

-        _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no

-        runpath_var=LD_RUN_PATH

-        hardcode_runpath_var=yes

-        _LT_AC_TAGVAR(ld_shlibs, $1)=yes

-      fi

-      ;;

-

-    sysv4.2uw2*)

-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'

-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes

-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=no

-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no

-      hardcode_runpath_var=yes

-      runpath_var=LD_RUN_PATH

-      ;;

-

-   sysv5OpenUNIX8* | sysv5UnixWare7* |  sysv5uw[[78]]* | unixware7*)

-      _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text'

-      if test "$GCC" = yes; then

-        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'

-      else

-        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'

-      fi

-      runpath_var='LD_RUN_PATH'

-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no

-      ;;

-

-    sysv5*)

-      _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'

-      # $CC -shared without GNU ld will not create a library from C++

-      # object files and a static libstdc++, better avoid it by now

-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'

-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~

-                $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'

-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=

-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no

-      runpath_var='LD_RUN_PATH'

-      ;;

-

-    uts4*)

-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'

-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'

-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no

-      ;;

-

-    *)

-      _LT_AC_TAGVAR(ld_shlibs, $1)=no

-      ;;

-    esac

-  fi

-])

-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])

-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no

-

-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"

-if test "$GCC" = yes; then

-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"

-fi

-

-#

-# Do we need to explicitly link libc?

-#

-case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in

-x|xyes)

-  # Assume -lc should be added

-  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes

-

-  if test "$enable_shared" = yes && test "$GCC" = yes; then

-    case $_LT_AC_TAGVAR(archive_cmds, $1) in

-    *'~'*)

-      # FIXME: we may have to deal with multi-command sequences.

-      ;;

-    '$CC '*)

-      # Test whether the compiler implicitly links with -lc since on some

-      # systems, -lgcc has to come before -lc. If gcc already passes -lc

-      # to ld, don't add -lc before -lgcc.

-      AC_MSG_CHECKING([whether -lc should be explicitly linked in])

-      $rm conftest*

-      printf "$lt_simple_compile_test_code" > conftest.$ac_ext

-

-      if AC_TRY_EVAL(ac_compile) 2>conftest.err; then

-        soname=conftest

-        lib=conftest

-        libobjs=conftest.$ac_objext

-        deplibs=

-        wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)

-        compiler_flags=-v

-        linker_flags=-v

-        verstring=

-        output_objdir=.

-        libname=conftest

-        lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)

-        _LT_AC_TAGVAR(allow_undefined_flag, $1)=

-        if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)

-        then

-          _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no

-        else

-          _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes

-        fi

-        _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag

-      else

-        cat conftest.err 1>&5

-      fi

-      $rm conftest*

-      AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])

-      ;;

-    esac

-  fi

-  ;;

-esac

-])# AC_LIBTOOL_PROG_LD_SHLIBS

-

-

-# _LT_AC_FILE_LTDLL_C

-# -------------------

-# Be careful that the start marker always follows a newline.

-AC_DEFUN([_LT_AC_FILE_LTDLL_C], [

-# /* ltdll.c starts here */

-# #define WIN32_LEAN_AND_MEAN

-# #include <windows.h>

-# #undef WIN32_LEAN_AND_MEAN

-# #include <stdio.h>

-#

-# #ifndef __CYGWIN__

-# #  ifdef __CYGWIN32__

-# #    define __CYGWIN__ __CYGWIN32__

-# #  endif

-# #endif

-#

-# #ifdef __cplusplus

-# extern "C" {

-# #endif

-# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);

-# #ifdef __cplusplus

-# }

-# #endif

-#

-# #ifdef __CYGWIN__

-# #include <cygwin/cygwin_dll.h>

-# DECLARE_CYGWIN_DLL( DllMain );

-# #endif

-# HINSTANCE __hDllInstance_base;

-#

-# BOOL APIENTRY

-# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)

-# {

-#   __hDllInstance_base = hInst;

-#   return TRUE;

-# }

-# /* ltdll.c ends here */

-])# _LT_AC_FILE_LTDLL_C

-

-

-# _LT_AC_TAGVAR(VARNAME, [TAGNAME])

-# ---------------------------------

-AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])

-

-

-# old names

-AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])

-AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])

-AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])

-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])

-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])

-AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])

-AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])

-

-# This is just to silence aclocal about the macro not being used

-ifelse([AC_DISABLE_FAST_INSTALL])

-

-AC_DEFUN([LT_AC_PROG_GCJ],

-[AC_CHECK_TOOL(GCJ, gcj, no)

-  test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"

-  AC_SUBST(GCJFLAGS)

-])

-

-AC_DEFUN([LT_AC_PROG_RC],

-[AC_CHECK_TOOL(RC, windres, no)

-])

-

-############################################################

-# NOTE: This macro has been submitted for inclusion into   #

-#  GNU Autoconf as AC_PROG_SED.  When it is available in   #

-#  a released version of Autoconf we should remove this    #

-#  macro and use it instead.                               #

-############################################################

-# LT_AC_PROG_SED

-# --------------

-# Check for a fully-functional sed program, that truncates

-# as few characters as possible.  Prefer GNU sed if found.

-AC_DEFUN([LT_AC_PROG_SED],

-[AC_MSG_CHECKING([for a sed that does not truncate output])

-AC_CACHE_VAL(lt_cv_path_SED,

-[# Loop through the user's path and test for sed and gsed.

-# Then use that list of sed's as ones to test for truncation.

-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR

-for as_dir in $PATH

-do

-  IFS=$as_save_IFS

-  test -z "$as_dir" && as_dir=.

-  for lt_ac_prog in sed gsed; do

-    for ac_exec_ext in '' $ac_executable_extensions; do

-      if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then

-        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"

-      fi

-    done

-  done

-done

-lt_ac_max=0

-lt_ac_count=0

-# Add /usr/xpg4/bin/sed as it is typically found on Solaris

-# along with /bin/sed that truncates output.

-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do

-  test ! -f $lt_ac_sed && break

-  cat /dev/null > conftest.in

-  lt_ac_count=0

-  echo $ECHO_N "0123456789$ECHO_C" >conftest.in

-  # Check for GNU sed and select it if it is found.

-  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then

-    lt_cv_path_SED=$lt_ac_sed

-    break

-  fi

-  while true; do

-    cat conftest.in conftest.in >conftest.tmp

-    mv conftest.tmp conftest.in

-    cp conftest.in conftest.nl

-    echo >>conftest.nl

-    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break

-    cmp -s conftest.out conftest.nl || break

-    # 10000 chars as input seems more than enough

-    test $lt_ac_count -gt 10 && break

-    lt_ac_count=`expr $lt_ac_count + 1`

-    if test $lt_ac_count -gt $lt_ac_max; then

-      lt_ac_max=$lt_ac_count

-      lt_cv_path_SED=$lt_ac_sed

-    fi

-  done

-done

-SED=$lt_cv_path_SED

-])

-AC_MSG_RESULT([$SED])

-])

+# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+## Copyright 1996, 1997, 1998, 1999, 2000, 2001
+## Free Software Foundation, Inc.
+## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful, but
+## WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+## General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+##
+## As a special exception to the GNU General Public License, if you
+## distribute this file as part of a program that contains a
+## configuration script generated by Autoconf, you may include it under
+## the same distribution terms that you use for the rest of that program.
+
+# serial 47 AC_PROG_LIBTOOL
+# Debian $Rev: 961 $
+
+
+# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
+# -----------------------------------------------------------
+# If this macro is not defined by Autoconf, define it here.
+m4_ifdef([AC_PROVIDE_IFELSE],
+         [],
+         [m4_define([AC_PROVIDE_IFELSE],
+                 [m4_ifdef([AC_PROVIDE_$1],
+                           [$2], [$3])])])
+
+
+# AC_PROG_LIBTOOL
+# ---------------
+AC_DEFUN([AC_PROG_LIBTOOL],
+[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
+dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
+dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
+  AC_PROVIDE_IFELSE([AC_PROG_CXX],
+    [AC_LIBTOOL_CXX],
+    [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
+  ])])
+dnl And a similar setup for Fortran 77 support
+  AC_PROVIDE_IFELSE([AC_PROG_F77],
+    [AC_LIBTOOL_F77],
+    [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
+])])
+
+dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
+dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
+dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
+  AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+    [AC_LIBTOOL_GCJ],
+    [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+      [AC_LIBTOOL_GCJ],
+      [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
+        [AC_LIBTOOL_GCJ],
+      [ifdef([AC_PROG_GCJ],
+             [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
+       ifdef([A][M_PROG_GCJ],
+             [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
+       ifdef([LT_AC_PROG_GCJ],
+             [define([LT_AC_PROG_GCJ],
+                defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
+])])# AC_PROG_LIBTOOL
+
+
+# _AC_PROG_LIBTOOL
+# ----------------
+AC_DEFUN([_AC_PROG_LIBTOOL],
+[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
+AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
+AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
+AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
+
+# Prevent multiple expansion
+define([AC_PROG_LIBTOOL], [])
+])# _AC_PROG_LIBTOOL
+
+
+# AC_LIBTOOL_SETUP
+# ----------------
+AC_DEFUN([AC_LIBTOOL_SETUP],
+[AC_PREREQ(2.50)dnl
+AC_REQUIRE([AC_ENABLE_SHARED])dnl
+AC_REQUIRE([AC_ENABLE_STATIC])dnl
+AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_PROG_LD])dnl
+AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
+AC_REQUIRE([AC_PROG_NM])dnl
+
+AC_REQUIRE([AC_PROG_LN_S])dnl
+AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
+# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
+AC_REQUIRE([AC_OBJEXT])dnl
+AC_REQUIRE([AC_EXEEXT])dnl
+dnl
+
+AC_LIBTOOL_SYS_MAX_CMD_LEN
+AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
+AC_LIBTOOL_OBJDIR
+
+AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+_LT_AC_PROG_ECHO_BACKSLASH
+
+case $host_os in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test "X${COLLECT_NAMES+set}" != Xset; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e s/^X//'
+[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
+
+# Same as above, but do not quote variable references.
+[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+# Constants:
+rm="rm -f"
+
+# Global variables:
+default_ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except M$VC,
+# which needs '.lib').
+libext=a
+ltmain="$ac_aux_dir/ltmain.sh"
+ofile="$default_ofile"
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+AC_CHECK_TOOL(AR, ar, false)
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+AC_CHECK_TOOL(STRIP, strip, :)
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+test -z "$AS" && AS=as
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+test -z "$LD" && LD=ld
+test -z "$LN_S" && LN_S="ln -s"
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+test -z "$NM" && NM=nm
+test -z "$SED" && SED=sed
+test -z "$OBJDUMP" && OBJDUMP=objdump
+test -z "$RANLIB" && RANLIB=:
+test -z "$STRIP" && STRIP=:
+test -z "$ac_objext" && ac_objext=o
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  openbsd*)
+    old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
+    ;;
+  *)
+    old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+fi
+
+# Only perform the check for file, if the check method requires it
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    AC_PATH_MAGIC
+  fi
+  ;;
+esac
+
+AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
+AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
+enable_win32_dll=yes, enable_win32_dll=no)
+
+AC_ARG_ENABLE([libtool-lock],
+    [AC_HELP_STRING([--disable-libtool-lock],
+        [avoid locking (might break parallel builds)])])
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+AC_ARG_WITH([pic],
+    [AC_HELP_STRING([--with-pic],
+        [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
+    [pic_mode="$withval"],
+    [pic_mode=default])
+test -z "$pic_mode" && pic_mode=default
+
+# Use C for the default configuration in the libtool script
+tagname=
+AC_LIBTOOL_LANG_C_CONFIG
+_LT_AC_TAGCONFIG
+])# AC_LIBTOOL_SETUP
+
+
+# _LT_AC_SYS_COMPILER
+# -------------------
+AC_DEFUN([_LT_AC_SYS_COMPILER],
+[AC_REQUIRE([AC_PROG_CC])dnl
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+])# _LT_AC_SYS_COMPILER
+
+
+# _LT_AC_SYS_LIBPATH_AIX
+# ----------------------
+# Links a minimal program and checks the executable
+# for the system default hardcoded library path. In most cases,
+# this is /usr/lib:/lib, but when the MPI compilers are used
+# the location of the communication and MPI libs are included too.
+# If we don't find anything, use the default library path according
+# to the aix ld manual.
+AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
+[AC_LINK_IFELSE(AC_LANG_PROGRAM,[
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`; fi],[])
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+])# _LT_AC_SYS_LIBPATH_AIX
+
+
+# _LT_AC_SHELL_INIT(ARG)
+# ----------------------
+AC_DEFUN([_LT_AC_SHELL_INIT],
+[ifdef([AC_DIVERSION_NOTICE],
+             [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
+         [AC_DIVERT_PUSH(NOTICE)])
+$1
+AC_DIVERT_POP
+])# _LT_AC_SHELL_INIT
+
+
+# _LT_AC_PROG_ECHO_BACKSLASH
+# --------------------------
+# Add some code to the start of the generated configure script which
+# will find an echo command which doesn't interpret backslashes.
+AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
+[_LT_AC_SHELL_INIT([
+# Check that we are running under the correct shell.
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+case X$ECHO in
+X*--fallback-echo)
+  # Remove one level of quotation (which was required for Make).
+  ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
+  ;;
+esac
+
+echo=${ECHO-echo}
+if test "X[$]1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X[$]1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
+  # Yippee, $echo works!
+  :
+else
+  # Restart under the correct shell.
+  exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
+fi
+
+if test "X[$]1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<EOF
+[$]*
+EOF
+  exit 0
+fi
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+
+if test -z "$ECHO"; then
+if test "X${echo_test_string+set}" != Xset; then
+# find a string as large as possible, as long as the shell can cope with it
+  for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
+    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+    if (echo_test_string="`eval $cmd`") 2>/dev/null &&
+       echo_test_string="`eval $cmd`" &&
+       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
+    then
+      break
+    fi
+  done
+fi
+
+if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+   test "X$echo_testing_string" = "X$echo_test_string"; then
+  :
+else
+  # The Solaris, AIX, and Digital Unix default echo programs unquote
+  # backslashes.  This makes it impossible to quote backslashes using
+  #   echo "$something" | sed 's/\\/\\\\/g'
+  #
+  # So, first we look for a working echo in the user's PATH.
+
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for dir in $PATH /usr/ucb; do
+    IFS="$lt_save_ifs"
+    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+       test "X$echo_testing_string" = "X$echo_test_string"; then
+      echo="$dir/echo"
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+
+  if test "X$echo" = Xecho; then
+    # We didn't find a better echo, so look for alternatives.
+    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
+       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
+       test "X$echo_testing_string" = "X$echo_test_string"; then
+      # This shell has a builtin print -r that does the trick.
+      echo='print -r'
+    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
+         test "X$CONFIG_SHELL" != X/bin/ksh; then
+      # If we have ksh, try running configure again with it.
+      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+      export ORIGINAL_CONFIG_SHELL
+      CONFIG_SHELL=/bin/ksh
+      export CONFIG_SHELL
+      exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
+    else
+      # Try using printf.
+      echo='printf %s\n'
+      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+         echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+         test "X$echo_testing_string" = "X$echo_test_string"; then
+        # Cool, printf works
+        :
+      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+           test "X$echo_testing_string" = 'X\t' &&
+           echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+           test "X$echo_testing_string" = "X$echo_test_string"; then
+        CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+        export CONFIG_SHELL
+        SHELL="$CONFIG_SHELL"
+        export SHELL
+        echo="$CONFIG_SHELL [$]0 --fallback-echo"
+      elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+           test "X$echo_testing_string" = 'X\t' &&
+           echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+           test "X$echo_testing_string" = "X$echo_test_string"; then
+        echo="$CONFIG_SHELL [$]0 --fallback-echo"
+      else
+        # maybe with a smaller string...
+        prev=:
+
+        for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
+          if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
+          then
+            break
+          fi
+          prev="$cmd"
+        done
+
+        if test "$prev" != 'sed 50q "[$]0"'; then
+          echo_test_string=`eval $prev`
+          export echo_test_string
+          exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
+        else
+          # Oops.  We lost completely, so just stick with echo.
+          echo=echo
+        fi
+      fi
+    fi
+  fi
+fi
+fi
+
+# Copy echo and quote the copy suitably for passing to libtool from
+# the Makefile, instead of quoting the original, which is used later.
+ECHO=$echo
+if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
+   ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
+fi
+
+AC_SUBST(ECHO)
+])])# _LT_AC_PROG_ECHO_BACKSLASH
+
+
+# _LT_AC_LOCK
+# -----------
+AC_DEFUN([_LT_AC_LOCK],
+[AC_ARG_ENABLE([libtool-lock],
+    [AC_HELP_STRING([--disable-libtool-lock],
+        [avoid locking (might break parallel builds)])])
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case `/usr/bin/file conftest.$ac_objext` in
+    *ELF-32*)
+      HPUX_IA64_MODE="32"
+      ;;
+    *ELF-64*)
+      HPUX_IA64_MODE="64"
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+*-*-irix6*)
+  # Find out which ABI we are using.
+  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+   if test "$lt_cv_prog_gnu_ld" = yes; then
+    case `/usr/bin/file conftest.$ac_objext` in
+    *32-bit*)
+      LD="${LD-ld} -melf32bsmip"
+      ;;
+    *N32*)
+      LD="${LD-ld} -melf32bmipn32"
+      ;;
+    *64-bit*)
+      LD="${LD-ld} -melf64bmip"
+      ;;
+    esac
+   else
+    case `/usr/bin/file conftest.$ac_objext` in
+    *32-bit*)
+      LD="${LD-ld} -32"
+      ;;
+    *N32*)
+      LD="${LD-ld} -n32"
+      ;;
+    *64-bit*)
+      LD="${LD-ld} -64"
+      ;;
+    esac
+   fi
+  fi
+  rm -rf conftest*
+  ;;
+
+x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case "`/usr/bin/file conftest.o`" in
+    *32-bit*)
+      case $host in
+        x86_64-*linux*)
+          LD="${LD-ld} -m elf_i386"
+          ;;
+        ppc64-*linux*|powerpc64-*linux*)
+          LD="${LD-ld} -m elf32ppclinux"
+          ;;
+        s390x-*linux*)
+          LD="${LD-ld} -m elf_s390"
+          ;;
+        sparc64-*linux*)
+          LD="${LD-ld} -m elf32_sparc"
+          ;;
+      esac
+      ;;
+    *64-bit*)
+      case $host in
+        x86_64-*linux*)
+          LD="${LD-ld} -m elf_x86_64"
+          ;;
+        ppc*-*linux*|powerpc*-*linux*)
+          LD="${LD-ld} -m elf64ppc"
+          ;;
+        s390*-*linux*)
+          LD="${LD-ld} -m elf64_s390"
+          ;;
+        sparc*-*linux*)
+          LD="${LD-ld} -m elf64_sparc"
+          ;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -belf"
+  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+    [AC_LANG_PUSH(C)
+     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+     AC_LANG_POP])
+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS="$SAVE_CFLAGS"
+  fi
+  ;;
+AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
+[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
+  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+  AC_CHECK_TOOL(AS, as, false)
+  AC_CHECK_TOOL(OBJDUMP, objdump, false)
+  ;;
+  ])
+esac
+
+need_locks="$enable_libtool_lock"
+
+])# _LT_AC_LOCK
+
+
+# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+#               [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------------------
+# Check whether the given compiler option works
+AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
+[AC_REQUIRE([LT_AC_PROG_SED])
+AC_CACHE_CHECK([$1], [$2],
+  [$2=no
+  ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
+   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$3"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&AS_MESSAGE_LOG_FD
+   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test ! -s conftest.err; then
+       $2=yes
+     fi
+   fi
+   $rm conftest*
+])
+
+if test x"[$]$2" = xyes; then
+    ifelse([$5], , :, [$5])
+else
+    ifelse([$6], , :, [$6])
+fi
+])# AC_LIBTOOL_COMPILER_OPTION
+
+
+# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+#                          [ACTION-SUCCESS], [ACTION-FAILURE])
+# ------------------------------------------------------------
+# Check whether the given compiler option works
+AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
+[AC_CACHE_CHECK([$1], [$2],
+  [$2=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $3"
+   printf "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&AS_MESSAGE_LOG_FD
+     else
+       $2=yes
+     fi
+   fi
+   $rm conftest*
+   LDFLAGS="$save_LDFLAGS"
+])
+
+if test x"[$]$2" = xyes; then
+    ifelse([$4], , :, [$4])
+else
+    ifelse([$5], , :, [$5])
+fi
+])# AC_LIBTOOL_LINKER_OPTION
+
+
+# AC_LIBTOOL_SYS_MAX_CMD_LEN
+# --------------------------
+AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
+[# find the maximum length of command line arguments
+AC_MSG_CHECKING([the maximum length of command line arguments])
+AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
+  i=0
+  teststring="ABCD"
+
+  case $build_os in
+  msdosdjgpp*)
+    # On DJGPP, this test can blow up pretty badly due to problems in libc
+    # (any single argument exceeding 2000 bytes causes a buffer overrun
+    # during glob expansion).  Even if it were fixed, the result of this
+    # check would be larger than it should be.
+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+    ;;
+
+  gnu*)
+    # Under GNU Hurd, this test is not required because there is
+    # no limit to the length of command line arguments.
+    # Libtool will interpret -1 as no limit whatsoever
+    lt_cv_sys_max_cmd_len=-1;
+    ;;
+
+  cygwin* | mingw*)
+    # On Win9x/ME, this test blows up -- it succeeds, but takes
+    # about 5 minutes as the teststring grows exponentially.
+    # Worse, since 9x/ME are not pre-emptively multitasking,
+    # you end up with a "frozen" computer, even though with patience
+    # the test eventually succeeds (with a max line length of 256k).
+    # Instead, let's just punt: use the minimum linelength reported by
+    # all of the supported platforms: 8192 (on NT/2K/XP).
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+ *)
+    # If test is not a shell built-in, we'll probably end up computing a
+    # maximum length that is only half of the actual maximum length, but
+    # we can't tell.
+    while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
+               = "XX$teststring") >/dev/null 2>&1 &&
+            new_result=`expr "X$teststring" : ".*" 2>&1` &&
+            lt_cv_sys_max_cmd_len=$new_result &&
+            test $i != 17 # 1/2 MB should be enough
+    do
+      i=`expr $i + 1`
+      teststring=$teststring$teststring
+    done
+    teststring=
+    # Add a significant safety factor because C++ compilers can tack on massive
+    # amounts of additional arguments before passing them to the linker.
+    # It appears as though 1/2 is a usable value.
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    ;;
+  esac
+])
+if test -n $lt_cv_sys_max_cmd_len ; then
+  AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
+else
+  AC_MSG_RESULT(none)
+fi
+])# AC_LIBTOOL_SYS_MAX_CMD_LEN
+
+
+# _LT_AC_CHECK_DLFCN
+# --------------------
+AC_DEFUN([_LT_AC_CHECK_DLFCN],
+[AC_CHECK_HEADERS(dlfcn.h)dnl
+])# _LT_AC_CHECK_DLFCN
+
+
+# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+#                           ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+# ------------------------------------------------------------------
+AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
+[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+if test "$cross_compiling" = yes; then :
+  [$4]
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<EOF
+[#line __oline__ "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL           RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL         DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL         0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW            RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW          DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW        RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW      DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW      0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+#ifdef __cplusplus
+extern "C" void exit (int);
+#endif
+
+void fnord() { int i=42;}
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+      /* dlclose (self); */
+    }
+
+    exit (status);
+}]
+EOF
+  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) $1 ;;
+      x$lt_dlneed_uscore) $2 ;;
+      x$lt_unknown|x*) $3 ;;
+    esac
+  else :
+    # compilation failed
+    $3
+  fi
+fi
+rm -fr conftest*
+])# _LT_AC_TRY_DLOPEN_SELF
+
+
+# AC_LIBTOOL_DLOPEN_SELF
+# -------------------
+AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
+[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+if test "x$enable_dlopen" != xyes; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+  lt_cv_dlopen=no
+  lt_cv_dlopen_libs=
+
+  case $host_os in
+  beos*)
+    lt_cv_dlopen="load_add_on"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ;;
+
+  mingw* | pw32*)
+    lt_cv_dlopen="LoadLibrary"
+    lt_cv_dlopen_libs=
+   ;;
+
+  cygwin*)
+    lt_cv_dlopen="dlopen"
+    lt_cv_dlopen_libs=
+   ;;
+
+  darwin*)
+  # if libdl is installed we need to link against it
+    AC_CHECK_LIB([dl], [dlopen],
+                [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
+    lt_cv_dlopen="dyld"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ])
+   ;;
+
+  *)
+    AC_CHECK_FUNC([shl_load],
+          [lt_cv_dlopen="shl_load"],
+      [AC_CHECK_LIB([dld], [shl_load],
+            [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
+        [AC_CHECK_FUNC([dlopen],
+              [lt_cv_dlopen="dlopen"],
+          [AC_CHECK_LIB([dl], [dlopen],
+                [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+            [AC_CHECK_LIB([svld], [dlopen],
+                  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+              [AC_CHECK_LIB([dld], [dld_link],
+                    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
+              ])
+            ])
+          ])
+        ])
+      ])
+    ;;
+  esac
+
+  if test "x$lt_cv_dlopen" != xno; then
+    enable_dlopen=yes
+  else
+    enable_dlopen=no
+  fi
+
+  case $lt_cv_dlopen in
+  dlopen)
+    save_CPPFLAGS="$CPPFLAGS"
+    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+    save_LDFLAGS="$LDFLAGS"
+    eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+    save_LIBS="$LIBS"
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+    AC_CACHE_CHECK([whether a program can dlopen itself],
+          lt_cv_dlopen_self, [dnl
+          _LT_AC_TRY_DLOPEN_SELF(
+            lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
+            lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
+    ])
+
+    if test "x$lt_cv_dlopen_self" = xyes; then
+      LDFLAGS="$LDFLAGS $link_static_flag"
+      AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
+          lt_cv_dlopen_self_static, [dnl
+          _LT_AC_TRY_DLOPEN_SELF(
+            lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
+            lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
+      ])
+    fi
+
+    CPPFLAGS="$save_CPPFLAGS"
+    LDFLAGS="$save_LDFLAGS"
+    LIBS="$save_LIBS"
+    ;;
+  esac
+
+  case $lt_cv_dlopen_self in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case $lt_cv_dlopen_self_static in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+])# AC_LIBTOOL_DLOPEN_SELF
+
+
+# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
+# ---------------------------------
+# Check to see if options -c and -o are simultaneously supported by compiler
+AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
+[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
+  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
+  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
+   $rm -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&AS_MESSAGE_LOG_FD
+   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test ! -s out/conftest.err; then
+       _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+     fi
+   fi
+   chmod u+w .
+   $rm conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
+   $rm out/* && rmdir out
+   cd ..
+   rmdir conftest
+   $rm conftest*
+])
+])# AC_LIBTOOL_PROG_CC_C_O
+
+
+# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
+# -----------------------------------------
+# Check to see if we can do hard links to lock some files if needed
+AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
+[AC_REQUIRE([_LT_AC_LOCK])dnl
+
+hard_links="nottested"
+if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  AC_MSG_CHECKING([if we can lock with hard links])
+  hard_links=yes
+  $rm conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  AC_MSG_RESULT([$hard_links])
+  if test "$hard_links" = no; then
+    AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
+
+
+# AC_LIBTOOL_OBJDIR
+# -----------------
+AC_DEFUN([AC_LIBTOOL_OBJDIR],
+[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
+[rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  lt_cv_objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null])
+objdir=$lt_cv_objdir
+])# AC_LIBTOOL_OBJDIR
+
+
+# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
+# ----------------------------------------------
+# Check hardcoding attributes.
+AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
+[AC_MSG_CHECKING([how to hardcode library paths into programs])
+_LT_AC_TAGVAR(hardcode_action, $1)=
+if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
+   test -n "$_LT_AC_TAGVAR(runpath_var $1)" || \
+   test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)"="Xyes" ; then
+
+  # We can hardcode non-existant directories.
+  if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
+     test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
+    # Linking always hardcodes the temporary library directory.
+    _LT_AC_TAGVAR(hardcode_action, $1)=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    _LT_AC_TAGVAR(hardcode_action, $1)=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
+fi
+AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
+
+if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
+
+
+# AC_LIBTOOL_SYS_LIB_STRIP
+# ------------------------
+AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
+[striplib=
+old_striplib=
+AC_MSG_CHECKING([whether stripping libraries is possible])
+if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  AC_MSG_RESULT([yes])
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+   darwin*)
+       if test -n "$STRIP" ; then
+         striplib="$STRIP -x"
+         AC_MSG_RESULT([yes])
+       else
+  AC_MSG_RESULT([no])
+fi
+       ;;
+   *)
+  AC_MSG_RESULT([no])
+    ;;
+  esac
+fi
+])# AC_LIBTOOL_SYS_LIB_STRIP
+
+
+# AC_LIBTOOL_SYS_DYNAMIC_LINKER
+# -----------------------------
+# PORTME Fill in your ld.so characteristics
+AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
+[AC_MSG_CHECKING([dynamic linker characteristics])
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+if test "$GCC" = yes; then
+  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+  else
+    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+  fi
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix4* | aix5*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[[01]] | aix4.[[01]].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+           echo ' yes '
+           echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+        :
+      else
+        can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  library_names_spec='$libname.ixlibrary $libname.a'
+  # Create ${libname}_ixlibrary.a entries in /sys/libs.
+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi4*)
+  version_type=linux
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$host_os in
+  yes,cygwin* | yes,mingw* | yes,pw32*)
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $rm \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+      ;;
+    mingw*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+      if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
+        # It is most probably a Windows format PATH printed by
+        # mingw gcc, but we are running on Cygwin. Gcc prints its search
+        # path with ; separators, and with drive letters. We can handle the
+        # drive letters (cygwin fileutils understands them), so leave them,
+        # especially as we might pass files found there to a mingw objdump,
+        # which wouldn't understand a cygwinified path. Ahh.
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    ;;
+
+  *)
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    ;;
+  esac
+  dynamic_linker='Win32 ld.exe'
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
+  # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
+  if test "$GCC" = yes; then
+    sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
+  else
+    sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
+  fi
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd1*)
+  dynamic_linker=no
+  ;;
+
+kfreebsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='GNU ld.so'
+  ;;
+
+freebsd*)
+  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  *) # from 3.2 on
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case "$host_cpu" in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+   hppa*64*)
+     shrext_cmds='.sl'
+     hardcode_into_libs=yes
+     dynamic_linker="$host_os dld.sl"
+     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+     soname_spec='${libname}${release}${shared_ext}$major'
+     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+     ;;
+   *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
+  postinstall_cmds='chmod 555 $lib'
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+        if test "$lt_cv_prog_gnu_ld" = yes; then
+                version_type=linux
+        else
+                version_type=irix
+        fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be Linux ELF.
+linux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`$SED -e 's/[:,\t]/ /g;s/=[^=]*$//;s/=[^= ]* / /g' /etc/ld.so.conf | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+knetbsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='GNU ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+nto-qnx*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+openbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=yes
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[[89]] | openbsd2.[[89]].*)
+        shlibpath_overrides_runpath=no
+        ;;
+      *)
+        shlibpath_overrides_runpath=yes
+        ;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+sco3.2v5*)
+  version_type=osf
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+solaris*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      export_dynamic_flag_spec='${wl}-Blargedynsym'
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+uts4*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+AC_MSG_RESULT([$dynamic_linker])
+test "$dynamic_linker" = no && can_build_shared=no
+])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
+
+
+# _LT_AC_TAGCONFIG
+# ----------------
+AC_DEFUN([_LT_AC_TAGCONFIG],
+[AC_ARG_WITH([tags],
+    [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
+        [include additional configurations @<:@automatic@:>@])],
+    [tagnames="$withval"])
+
+if test -f "$ltmain" && test -n "$tagnames"; then
+  if test ! -f "${ofile}"; then
+    AC_MSG_WARN([output file `$ofile' does not exist])
+  fi
+
+  if test -z "$LTCC"; then
+    eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
+    if test -z "$LTCC"; then
+      AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
+    else
+      AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
+    fi
+  fi
+
+  # Extract list of available tagged configurations in $ofile.
+  # Note that this assumes the entire list is on one line.
+  available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
+
+  lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+  for tagname in $tagnames; do
+    IFS="$lt_save_ifs"
+    # Check whether tagname contains only valid characters
+    case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
+    "") ;;
+    *)  AC_MSG_ERROR([invalid tag name: $tagname])
+        ;;
+    esac
+
+    if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
+    then
+      AC_MSG_ERROR([tag name \"$tagname\" already exists])
+    fi
+
+    # Update the list of available tags.
+    if test -n "$tagname"; then
+      echo appending configuration tag \"$tagname\" to $ofile
+
+      case $tagname in
+      CXX)
+        if test -n "$CXX" && test "X$CXX" != "Xno"; then
+          AC_LIBTOOL_LANG_CXX_CONFIG
+        else
+          tagname=""
+        fi
+        ;;
+
+      F77)
+        if test -n "$F77" && test "X$F77" != "Xno"; then
+          AC_LIBTOOL_LANG_F77_CONFIG
+        else
+          tagname=""
+        fi
+        ;;
+
+      GCJ)
+        if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
+          AC_LIBTOOL_LANG_GCJ_CONFIG
+        else
+          tagname=""
+        fi
+        ;;
+
+      RC)
+        AC_LIBTOOL_LANG_RC_CONFIG
+        ;;
+
+      *)
+        AC_MSG_ERROR([Unsupported tag name: $tagname])
+        ;;
+      esac
+
+      # Append the new tag name to the list of available tags.
+      if test -n "$tagname" ; then
+      available_tags="$available_tags $tagname"
+    fi
+    fi
+  done
+  IFS="$lt_save_ifs"
+
+  # Now substitute the updated list of available tags.
+  if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
+    mv "${ofile}T" "$ofile"
+    chmod +x "$ofile"
+  else
+    rm -f "${ofile}T"
+    AC_MSG_ERROR([unable to update list of available tagged configurations.])
+  fi
+fi
+])# _LT_AC_TAGCONFIG
+
+
+# AC_LIBTOOL_DLOPEN
+# -----------------
+# enable checks for dlopen support
+AC_DEFUN([AC_LIBTOOL_DLOPEN],
+ [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
+])# AC_LIBTOOL_DLOPEN
+
+
+# AC_LIBTOOL_WIN32_DLL
+# --------------------
+# declare package support for building win32 dll's
+AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
+[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
+])# AC_LIBTOOL_WIN32_DLL
+
+
+# AC_ENABLE_SHARED([DEFAULT])
+# ---------------------------
+# implement the --enable-shared flag
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+AC_DEFUN([AC_ENABLE_SHARED],
+[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE([shared],
+    [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
+        [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+        IFS="$lt_save_ifs"
+        if test "X$pkg" = "X$p"; then
+          enable_shared=yes
+        fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
+])# AC_ENABLE_SHARED
+
+
+# AC_DISABLE_SHARED
+# -----------------
+#- set the default shared flag to --disable-shared
+AC_DEFUN([AC_DISABLE_SHARED],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_SHARED(no)
+])# AC_DISABLE_SHARED
+
+
+# AC_ENABLE_STATIC([DEFAULT])
+# ---------------------------
+# implement the --enable-static flag
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+AC_DEFUN([AC_ENABLE_STATIC],
+[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE([static],
+    [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
+        [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+        IFS="$lt_save_ifs"
+        if test "X$pkg" = "X$p"; then
+          enable_static=yes
+        fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [enable_static=]AC_ENABLE_STATIC_DEFAULT)
+])# AC_ENABLE_STATIC
+
+
+# AC_DISABLE_STATIC
+# -----------------
+# set the default static flag to --disable-static
+AC_DEFUN([AC_DISABLE_STATIC],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_STATIC(no)
+])# AC_DISABLE_STATIC
+
+
+# AC_ENABLE_FAST_INSTALL([DEFAULT])
+# ---------------------------------
+# implement the --enable-fast-install flag
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+AC_DEFUN([AC_ENABLE_FAST_INSTALL],
+[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE([fast-install],
+    [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
+    [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+        IFS="$lt_save_ifs"
+        if test "X$pkg" = "X$p"; then
+          enable_fast_install=yes
+        fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
+])# AC_ENABLE_FAST_INSTALL
+
+
+# AC_DISABLE_FAST_INSTALL
+# -----------------------
+# set the default to --disable-fast-install
+AC_DEFUN([AC_DISABLE_FAST_INSTALL],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_FAST_INSTALL(no)
+])# AC_DISABLE_FAST_INSTALL
+
+
+# AC_LIBTOOL_PICMODE([MODE])
+# --------------------------
+# implement the --with-pic flag
+# MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
+AC_DEFUN([AC_LIBTOOL_PICMODE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+pic_mode=ifelse($#,1,$1,default)
+])# AC_LIBTOOL_PICMODE
+
+
+# AC_PROG_EGREP
+# -------------
+# This is predefined starting with Autoconf 2.54, so this conditional
+# definition can be removed once we require Autoconf 2.54 or later.
+m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
+[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],
+   [if echo a | (grep -E '(a|b)') >/dev/null 2>&1
+    then ac_cv_prog_egrep='grep -E'
+    else ac_cv_prog_egrep='egrep'
+    fi])
+ EGREP=$ac_cv_prog_egrep
+ AC_SUBST([EGREP])
+])])
+
+
+# AC_PATH_TOOL_PREFIX
+# -------------------
+# find a file program which can recognise shared library
+AC_DEFUN([AC_PATH_TOOL_PREFIX],
+[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_MSG_CHECKING([for $1])
+AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
+[case $MAGIC_CMD in
+[[\\/*] |  ?:[\\/]*])
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+dnl $ac_dummy forces splitting on constant user-supplied paths.
+dnl POSIX.2 word splitting is done only on the output of word expansions,
+dnl not every word.  This closes a longstanding sh security hole.
+  ac_dummy="ifelse([$2], , $PATH, [$2])"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$1; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
+      if test -n "$file_magic_test_file"; then
+        case $deplibs_check_method in
+        "file_magic "*)
+          file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+          MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+          if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+            $EGREP "$file_magic_regex" > /dev/null; then
+            :
+          else
+            cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+          fi ;;
+        esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac])
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  AC_MSG_RESULT($MAGIC_CMD)
+else
+  AC_MSG_RESULT(no)
+fi
+])# AC_PATH_TOOL_PREFIX
+
+
+# AC_PATH_MAGIC
+# -------------
+# find a file program which can recognise a shared library
+AC_DEFUN([AC_PATH_MAGIC],
+[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
+  else
+    MAGIC_CMD=:
+  fi
+fi
+])# AC_PATH_MAGIC
+
+
+# AC_PROG_LD
+# ----------
+# find the pathname to the GNU or non-GNU linker
+AC_DEFUN([AC_PROG_LD],
+[AC_ARG_WITH([gnu-ld],
+    [AC_HELP_STRING([--with-gnu-ld],
+        [assume the C compiler uses GNU ld @<:@default=no@:>@])],
+    [test "$withval" = no || with_gnu_ld=yes],
+    [with_gnu_ld=no])
+AC_REQUIRE([LT_AC_PROG_SED])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  AC_MSG_CHECKING([for ld used by $CC])
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [[\\/]]* | ?:[[\\/]]*)
+      re_direlt='/[[^/]][[^/]]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
+      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+        ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  AC_MSG_CHECKING([for GNU ld])
+else
+  AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(lt_cv_path_LD,
+[if test -z "$LD"; then
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some GNU ld's only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+        test "$with_gnu_ld" != no && break
+        ;;
+      *)
+        test "$with_gnu_ld" != yes && break
+        ;;
+      esac
+    fi
+  done
+  IFS="$lt_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  AC_MSG_RESULT($LD)
+else
+  AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+AC_PROG_LD_GNU
+])# AC_PROG_LD
+
+
+# AC_PROG_LD_GNU
+# --------------
+AC_DEFUN([AC_PROG_LD_GNU],
+[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac])
+with_gnu_ld=$lt_cv_prog_gnu_ld
+])# AC_PROG_LD_GNU
+
+
+# AC_PROG_LD_RELOAD_FLAG
+# ----------------------
+# find reload flag for linker
+#   -- PORTME Some linkers may need a different reload flag.
+AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
+[AC_CACHE_CHECK([for $LD option to reload object files],
+  lt_cv_ld_reload_flag,
+  [lt_cv_ld_reload_flag='-r'])
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+])# AC_PROG_LD_RELOAD_FLAG
+
+
+# AC_DEPLIBS_CHECK_METHOD
+# -----------------------
+# how to check for library dependencies
+#  -- PORTME fill in with the dynamic library characteristics
+AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
+[AC_CACHE_CHECK([how to recognise dependent libraries],
+lt_cv_deplibs_check_method,
+[lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix4* | aix5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+bsdi4*)
+  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
+
+cygwin*)
+  # func_win32_libid is a shell function defined in ltmain.sh
+  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+  lt_cv_file_magic_cmd='func_win32_libid'
+  ;;
+
+mingw* | pw32*)
+  # Base MSYS/MinGW do not provide the 'file' command needed by
+  # func_win32_libid shell function, so use a weaker test based on 'objdump'.
+  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
+
+darwin* | rhapsody*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+freebsd* | kfreebsd*-gnu)
+  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+    case $host_cpu in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library'
+      lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+hpux10.20* | hpux11*)
+  lt_cv_file_magic_cmd=/usr/bin/file
+  case "$host_cpu" in
+  ia64*)
+    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
+    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+    ;;
+  hppa*64*)
+    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
+    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+    ;;
+  *)
+    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
+    lt_cv_file_magic_test_file=/usr/lib/libc.sl
+    ;;
+  esac
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $LD in
+  *-32|*"-32 ") libmagic=32-bit;;
+  *-n32|*"-n32 ") libmagic=N32;;
+  *-64|*"-64 ") libmagic=64-bit;;
+  *) libmagic=never-match;;
+  esac
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+# This must be Linux ELF.
+linux*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+netbsd* | knetbsd*-gnu)
+  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
+  fi
+  ;;
+
+newos6*)
+  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
+  ;;
+
+nto-qnx*)
+  lt_cv_deplibs_check_method=unknown
+  ;;
+
+openbsd*)
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object'
+  else
+    lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
+  fi
+  ;;
+
+osf3* | osf4* | osf5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sco3.2v5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+solaris*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+  case $host_vendor in
+  motorola)
+    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  sequent)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
+    ;;
+  sni)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
+    lt_cv_file_magic_test_file=/lib/libc.so
+    ;;
+  siemens)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  esac
+  ;;
+
+sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+esac
+])
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+])# AC_DEPLIBS_CHECK_METHOD
+
+
+# AC_PROG_NM
+# ----------
+# find the pathname to a BSD-compatible name lister
+AC_DEFUN([AC_PROG_NM],
+[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
+[if test -n "$NM"; then
+  # Let the user override the test.
+  lt_cv_path_NM="$NM"
+else
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    tmp_nm="$ac_dir/${ac_tool_prefix}nm"
+    if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+      # Check to see if the nm accepts a BSD-compat flag.
+      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+      #   nm: unknown option "B" ignored
+      # Tru64's nm complains that /dev/null is an invalid object file
+      case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+      */dev/null* | *'Invalid file or object type'*)
+        lt_cv_path_NM="$tmp_nm -B"
+        break
+        ;;
+      *)
+        case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+        */dev/null*)
+          lt_cv_path_NM="$tmp_nm -p"
+          break
+          ;;
+        *)
+          lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+          continue # so that we can try to find one that supports BSD flags
+          ;;
+        esac
+      esac
+    fi
+  done
+  IFS="$lt_save_ifs"
+  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+fi])
+NM="$lt_cv_path_NM"
+])# AC_PROG_NM
+
+
+# AC_CHECK_LIBM
+# -------------
+# check for math library
+AC_DEFUN([AC_CHECK_LIBM],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case $host in
+*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
+  # These system don't have libm, or don't need it
+  ;;
+*-ncr-sysv4.3*)
+  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+  AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
+  ;;
+*)
+  AC_CHECK_LIB(m, cos, LIBM="-lm")
+  ;;
+esac
+])# AC_CHECK_LIBM
+
+
+# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
+# -----------------------------------
+# sets LIBLTDL to the link flags for the libltdl convenience library and
+# LTDLINCL to the include flags for the libltdl header and adds
+# --enable-ltdl-convenience to the configure arguments.  Note that LIBLTDL
+# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If
+# DIRECTORY is not provided, it is assumed to be `libltdl'.  LIBLTDL will
+# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with
+# '${top_srcdir}/' (note the single quotes!).  If your package is not
+# flat and you're not using automake, define top_builddir and
+# top_srcdir appropriately in the Makefiles.
+AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+  case $enable_ltdl_convenience in
+  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
+  "") enable_ltdl_convenience=yes
+      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
+  esac
+  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
+  LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+  # For backwards non-gettext consistent compatibility...
+  INCLTDL="$LTDLINCL"
+])# AC_LIBLTDL_CONVENIENCE
+
+
+# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
+# -----------------------------------
+# sets LIBLTDL to the link flags for the libltdl installable library and
+# LTDLINCL to the include flags for the libltdl header and adds
+# --enable-ltdl-install to the configure arguments.  Note that LIBLTDL
+# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If
+# DIRECTORY is not provided and an installed libltdl is not found, it is
+# assumed to be `libltdl'.  LIBLTDL will be prefixed with '${top_builddir}/'
+# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single
+# quotes!).  If your package is not flat and you're not using automake,
+# define top_builddir and top_srcdir appropriately in the Makefiles.
+# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
+AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+  AC_CHECK_LIB(ltdl, lt_dlinit,
+  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+  [if test x"$enable_ltdl_install" = xno; then
+     AC_MSG_WARN([libltdl not installed, but installation disabled])
+   else
+     enable_ltdl_install=yes
+   fi
+  ])
+  if test x"$enable_ltdl_install" = x"yes"; then
+    ac_configure_args="$ac_configure_args --enable-ltdl-install"
+    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
+    LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+  else
+    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+    LIBLTDL="-lltdl"
+    LTDLINCL=
+  fi
+  # For backwards non-gettext consistent compatibility...
+  INCLTDL="$LTDLINCL"
+])# AC_LIBLTDL_INSTALLABLE
+
+
+# AC_LIBTOOL_CXX
+# --------------
+# enable support for C++ libraries
+AC_DEFUN([AC_LIBTOOL_CXX],
+[AC_REQUIRE([_LT_AC_LANG_CXX])
+])# AC_LIBTOOL_CXX
+
+
+# _LT_AC_LANG_CXX
+# ---------------
+AC_DEFUN([_LT_AC_LANG_CXX],
+[AC_REQUIRE([AC_PROG_CXX])
+AC_REQUIRE([AC_PROG_CXXCPP])
+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX])
+])# _LT_AC_LANG_CXX
+
+
+# AC_LIBTOOL_F77
+# --------------
+# enable support for Fortran 77 libraries
+AC_DEFUN([AC_LIBTOOL_F77],
+[AC_REQUIRE([_LT_AC_LANG_F77])
+])# AC_LIBTOOL_F77
+
+
+# _LT_AC_LANG_F77
+# ---------------
+AC_DEFUN([_LT_AC_LANG_F77],
+[AC_REQUIRE([AC_PROG_F77])
+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77])
+])# _LT_AC_LANG_F77
+
+
+# AC_LIBTOOL_GCJ
+# --------------
+# enable support for GCJ libraries
+AC_DEFUN([AC_LIBTOOL_GCJ],
+[AC_REQUIRE([_LT_AC_LANG_GCJ])
+])# AC_LIBTOOL_GCJ
+
+
+# _LT_AC_LANG_GCJ
+# ---------------
+AC_DEFUN([_LT_AC_LANG_GCJ],
+[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
+  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
+    [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
+      [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
+         [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
+           [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ])
+])# _LT_AC_LANG_GCJ
+
+
+# AC_LIBTOOL_RC
+# --------------
+# enable support for Windows resource files
+AC_DEFUN([AC_LIBTOOL_RC],
+[AC_REQUIRE([LT_AC_PROG_RC])
+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC])
+])# AC_LIBTOOL_RC
+
+
+# AC_LIBTOOL_LANG_C_CONFIG
+# ------------------------
+# Ensure that the configuration vars for the C compiler are
+# suitably defined.  Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
+AC_DEFUN([_LT_AC_LANG_C_CONFIG],
+[lt_save_CC="$CC"
+AC_LANG_PUSH(C)
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+_LT_AC_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;\n"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}\n'
+
+_LT_AC_SYS_COMPILER
+
+#
+# Check for any special shared library compilation flags.
+#
+_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)=
+if test "$GCC" = no; then
+  case $host_os in
+  sco3.2v5*)
+    _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf'
+    ;;
+  esac
+fi
+if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then
+  AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries])
+  if echo "$old_CC $old_CFLAGS " | grep "[[     ]]$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[        ]]" >/dev/null; then :
+  else
+    AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure])
+    _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no
+  fi
+fi
+
+
+#
+# Check to make sure the static flag actually works.
+#
+AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works],
+  _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
+  $_LT_AC_TAGVAR(lt_prog_compiler_static, $1),
+  [],
+  [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
+
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
+AC_LIBTOOL_PROG_COMPILER_PIC($1)
+AC_LIBTOOL_PROG_CC_C_O($1)
+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
+AC_LIBTOOL_PROG_LD_SHLIBS($1)
+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+AC_LIBTOOL_SYS_LIB_STRIP
+AC_LIBTOOL_DLOPEN_SELF($1)
+
+# Report which librarie types wil actually be built
+AC_MSG_CHECKING([if libtool supports shared libraries])
+AC_MSG_RESULT([$can_build_shared])
+
+AC_MSG_CHECKING([whether to build shared libraries])
+test "$can_build_shared" = "no" && enable_shared=no
+
+# On AIX, shared libraries and static libraries use the same namespace, and
+# are all built from PIC.
+case "$host_os" in
+aix3*)
+  test "$enable_shared" = yes && enable_static=no
+  if test -n "$RANLIB"; then
+    archive_cmds="$archive_cmds~\$RANLIB \$lib"
+    postinstall_cmds='$RANLIB $lib'
+  fi
+  ;;
+
+aix4* | aix5*)
+  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+    test "$enable_shared" = yes && enable_static=no
+  fi
+  ;;
+  darwin* | rhapsody*)
+  if test "$GCC" = yes; then
+    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+    case "$host_os" in
+    rhapsody* | darwin1.[[012]])
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
+      ;;
+    *) # Darwin 1.3 on
+      if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+        _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
+      else
+        case ${MACOSX_DEPLOYMENT_TARGET} in
+          10.[[012]])
+            _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
+            ;;
+          10.*)
+            _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup'
+            ;;
+        esac
+      fi
+      ;;
+    esac
+    output_verbose_link_cmd='echo'
+    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring'
+    _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+    # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
+    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag  -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    _LT_AC_TAGVAR(hardcode_direct, $1)=no
+    _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
+    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+    _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
+    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+  else
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+  fi
+    ;;
+esac
+AC_MSG_RESULT([$enable_shared])
+
+AC_MSG_CHECKING([whether to build static libraries])
+# Make sure either enable_shared or enable_static is yes.
+test "$enable_shared" = yes || enable_static=yes
+AC_MSG_RESULT([$enable_static])
+
+AC_LIBTOOL_CONFIG($1)
+
+AC_LANG_POP
+CC="$lt_save_CC"
+])# AC_LIBTOOL_LANG_C_CONFIG
+
+
+# AC_LIBTOOL_LANG_CXX_CONFIG
+# --------------------------
+# Ensure that the configuration vars for the C compiler are
+# suitably defined.  Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
+AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
+[AC_LANG_PUSH(C++)
+AC_REQUIRE([AC_PROG_CXX])
+AC_REQUIRE([AC_PROG_CXXCPP])
+
+_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_AC_TAGVAR(allow_undefined_flag, $1)=
+_LT_AC_TAGVAR(always_export_symbols, $1)=no
+_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
+_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_AC_TAGVAR(hardcode_direct, $1)=no
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
+_LT_AC_TAGVAR(hardcode_automatic, $1)=no
+_LT_AC_TAGVAR(module_cmds, $1)=
+_LT_AC_TAGVAR(module_expsym_cmds, $1)=
+_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_AC_TAGVAR(no_undefined_flag, $1)=
+_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Dependencies to place before and after the object being linked:
+_LT_AC_TAGVAR(predep_objects, $1)=
+_LT_AC_TAGVAR(postdep_objects, $1)=
+_LT_AC_TAGVAR(predeps, $1)=
+_LT_AC_TAGVAR(postdeps, $1)=
+_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
+
+# Source file extension for C++ test sources.
+ac_ext=cc
+
+# Object file extension for compiled C++ test sources.
+objext=o
+_LT_AC_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;\n"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_AC_SYS_COMPILER
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_LD=$LD
+lt_save_GCC=$GCC
+GCC=$GXX
+lt_save_with_gnu_ld=$with_gnu_ld
+lt_save_path_LD=$lt_cv_path_LD
+if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+  lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+else
+  unset lt_cv_prog_gnu_ld
+fi
+if test -n "${lt_cv_path_LDCXX+set}"; then
+  lt_cv_path_LD=$lt_cv_path_LDCXX
+else
+  unset lt_cv_path_LD
+fi
+test -z "${LDCXX+set}" || LD=$LDCXX
+CC=${CXX-"c++"}
+compiler=$CC
+_LT_AC_TAGVAR(compiler, $1)=$CC
+cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
+
+# We don't want -fno-exception wen compiling C++ code, so set the
+# no_builtin_flag separately
+if test "$GXX" = yes; then
+  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+else
+  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+fi
+
+if test "$GXX" = yes; then
+  # Set up default GNU C++ configuration
+
+  AC_PROG_LD
+
+  # Check if GNU C++ uses GNU ld as the underlying linker, since the
+  # archiving commands below assume that GNU ld is being used.
+  if test "$with_gnu_ld" = yes; then
+    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+    #     investigate it a little bit more. (MM)
+    wlarc='${wl}'
+
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
+        grep 'no-whole-archive' > /dev/null; then
+      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+    fi
+  else
+    with_gnu_ld=no
+    wlarc=
+
+    # A generic and very simple default shared library creation
+    # command for GNU C++ for the case where it uses the native
+    # linker, instead of GNU ld.  If possible, this setting should
+    # overridden to take advantage of the native linker features on
+    # the platform it is being used on.
+    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+  fi
+
+  # Commands to make compiler produce verbose output that lists
+  # what "hidden" libraries, object files and flags are used when
+  # linking a shared library.
+  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+
+else
+  GXX=no
+  with_gnu_ld=no
+  wlarc=
+fi
+
+# PORTME: fill in a description of your system's C++ link characteristics
+AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+_LT_AC_TAGVAR(ld_shlibs, $1)=yes
+case $host_os in
+  aix3*)
+    # FIXME: insert proper C++ library support
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  aix4* | aix5*)
+    if test "$host_cpu" = ia64; then
+      # On IA64, the linker does run time linking by default, so we don't
+      # have to do anything special.
+      aix_use_runtimelinking=no
+      exp_sym_flag='-Bexport'
+      no_entry_flag=""
+    else
+      aix_use_runtimelinking=no
+
+      # Test if we are trying to use run time linking or normal
+      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+      # need to do runtime linking.
+      case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
+        for ld_flag in $LDFLAGS; do
+          case $ld_flag in
+          *-brtl*)
+            aix_use_runtimelinking=yes
+            break
+            ;;
+          esac
+        done
+      esac
+
+      exp_sym_flag='-bexport'
+      no_entry_flag='-bnoentry'
+    fi
+
+    # When large executables or shared objects are built, AIX ld can
+    # have problems creating the table of contents.  If linking a library
+    # or program results in "error TOC overflow" add -mminimal-toc to
+    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+    _LT_AC_TAGVAR(archive_cmds, $1)=''
+    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
+    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+
+    if test "$GXX" = yes; then
+      case $host_os in aix4.[012]|aix4.[012].*)
+      # We only want to do this on AIX 4.2 and lower, the check
+      # below for broken collect2 doesn't work under 4.3+
+        collect2name=`${CC} -print-prog-name=collect2`
+        if test -f "$collect2name" && \
+           strings "$collect2name" | grep resolve_lib_name >/dev/null
+        then
+          # We have reworked collect2
+          _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+        else
+          # We have old collect2
+          _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
+          # It fails to find uninstalled libraries when the uninstalled
+          # path is not listed in the libpath.  Setting hardcode_minus_L
+          # to unsupported forces relinking
+          _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+          _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+          _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+        fi
+      esac
+      shared_flag='-shared'
+    else
+      # not using gcc
+      if test "$host_cpu" = ia64; then
+        # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+        # chokes on -Wl,-G. The following line is correct:
+        shared_flag='-G'
+      else
+        if test "$aix_use_runtimelinking" = yes; then
+          shared_flag='${wl}-G'
+        else
+          shared_flag='${wl}-bM:SRE'
+        fi
+      fi
+    fi
+
+    # It seems that -bexpall does not export symbols beginning with
+    # underscore (_), so it is better to generate a list of symbols to export.
+    _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+    if test "$aix_use_runtimelinking" = yes; then
+      # Warning - without using the other runtime loading flags (-brtl),
+      # -berok will link without error, but may produce a broken library.
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
+      # Determine the default libpath from the value encoded in an empty executable.
+      _LT_AC_SYS_LIBPATH_AIX
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+     else
+      if test "$host_cpu" = ia64; then
+        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+        _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+        _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+      else
+        # Determine the default libpath from the value encoded in an empty executable.
+        _LT_AC_SYS_LIBPATH_AIX
+        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+        # Warning - without using the other run time loading flags,
+        # -berok will link without error, but may produce a broken library.
+        _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+        _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+        # -bexpall does not export symbols beginning with underscore (_)
+        _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+        # Exported symbols can be pulled into shared objects from archives
+        _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
+        _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+        # This is similar to how AIX traditionally builds it's shared libraries.
+        _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+      fi
+    fi
+    ;;
+  chorus*)
+    case $cc_basename in
+      *)
+        # FIXME: insert proper C++ library support
+        _LT_AC_TAGVAR(ld_shlibs, $1)=no
+        ;;
+    esac
+    ;;
+
+  cygwin* | mingw* | pw32*)
+    # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+    # as there is no search path for DLLs.
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+    _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+    _LT_AC_TAGVAR(always_export_symbols, $1)=no
+    _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+
+    if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
+      # If the export-symbols file already is a .def file (1st line
+      # is EXPORTS), use it as is; otherwise, prepend...
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+        cp $export_symbols $output_objdir/$soname.def;
+      else
+        echo EXPORTS > $output_objdir/$soname.def;
+        cat $export_symbols >> $output_objdir/$soname.def;
+      fi~
+      $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
+    else
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    fi
+  ;;
+
+  darwin* | rhapsody*)
+  if test "$GXX" = yes; then
+    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+    case "$host_os" in
+    rhapsody* | darwin1.[[012]])
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
+      ;;
+    *) # Darwin 1.3 on
+      if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+        _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
+      else
+        case ${MACOSX_DEPLOYMENT_TARGET} in
+          10.[[012]])
+            _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
+            ;;
+          10.*)
+            _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup'
+            ;;
+        esac
+      fi
+      ;;
+    esac
+    lt_int_apple_cc_single_mod=no
+    output_verbose_link_cmd='echo'
+    if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
+      lt_int_apple_cc_single_mod=yes
+    fi
+    if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+    else
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+    fi
+    _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+
+    # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
+    if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    else
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    fi
+    _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    _LT_AC_TAGVAR(hardcode_direct, $1)=no
+    _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
+    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+    _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
+    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+  else
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+  fi
+    ;;
+
+  dgux*)
+    case $cc_basename in
+      ec++)
+        # FIXME: insert proper C++ library support
+        _LT_AC_TAGVAR(ld_shlibs, $1)=no
+        ;;
+      ghcx)
+        # Green Hills C++ Compiler
+        # FIXME: insert proper C++ library support
+        _LT_AC_TAGVAR(ld_shlibs, $1)=no
+        ;;
+      *)
+        # FIXME: insert proper C++ library support
+        _LT_AC_TAGVAR(ld_shlibs, $1)=no
+        ;;
+    esac
+    ;;
+  freebsd[12]*)
+    # C++ shared libraries reported to be fairly broken before switch to ELF
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  freebsd-elf*)
+    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+    ;;
+  freebsd* | kfreebsd*-gnu)
+    # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+    # conventions
+    _LT_AC_TAGVAR(ld_shlibs, $1)=yes
+    ;;
+  gnu*)
+    ;;
+  hpux9*)
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+    _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+                                # but as the default
+                                # location of the library.
+
+    case $cc_basename in
+    CC)
+      # FIXME: insert proper C++ library support
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      ;;
+    aCC)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      # Commands to make compiler produce verbose output that lists
+      # what "hidden" libraries, object files and flags are used when
+      # linking a shared library.
+      #
+      # There doesn't appear to be a way to prevent this compiler from
+      # explicitly linking system object files so we need to strip them
+      # from the output so that they don't get included in the library
+      # dependencies.
+      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+      ;;
+    *)
+      if test "$GXX" = yes; then
+        _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+        # FIXME: insert proper C++ library support
+        _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+    esac
+    ;;
+  hpux10*|hpux11*)
+    if test $with_gnu_ld = no; then
+      case "$host_cpu" in
+      hppa*64*)
+        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+        _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
+        _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+        ;;
+      ia64*)
+        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+        ;;
+      *)
+        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+        _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+        _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+        ;;
+      esac
+    fi
+    case "$host_cpu" in
+    hppa*64*)
+      _LT_AC_TAGVAR(hardcode_direct, $1)=no
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+    ia64*)
+      _LT_AC_TAGVAR(hardcode_direct, $1)=no
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+                                              # but as the default
+                                              # location of the library.
+      ;;
+    *)
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+                                              # but as the default
+                                              # location of the library.
+      ;;
+    esac
+
+    case $cc_basename in
+      CC)
+        # FIXME: insert proper C++ library support
+        _LT_AC_TAGVAR(ld_shlibs, $1)=no
+        ;;
+      aCC)
+        case "$host_cpu" in
+        hppa*64*|ia64*)
+          _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
+          ;;
+        *)
+          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+          ;;
+        esac
+        # Commands to make compiler produce verbose output that lists
+        # what "hidden" libraries, object files and flags are used when
+        # linking a shared library.
+        #
+        # There doesn't appear to be a way to prevent this compiler from
+        # explicitly linking system object files so we need to strip them
+        # from the output so that they don't get included in the library
+        # dependencies.
+        output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+        ;;
+      *)
+        if test "$GXX" = yes; then
+          if test $with_gnu_ld = no; then
+            case "$host_cpu" in
+            ia64*|hppa*64*)
+              _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
+              ;;
+            *)
+              _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+              ;;
+            esac
+          fi
+        else
+          # FIXME: insert proper C++ library support
+          _LT_AC_TAGVAR(ld_shlibs, $1)=no
+        fi
+        ;;
+    esac
+    ;;
+  irix5* | irix6*)
+    case $cc_basename in
+      CC)
+        # SGI C++
+        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+
+        # Archives containing C++ object files must be created using
+        # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
+        # necessary to make sure instantiated templates are included
+        # in the archive.
+        _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
+        ;;
+      *)
+        if test "$GXX" = yes; then
+          if test "$with_gnu_ld" = no; then
+            _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+          else
+            _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
+          fi
+        fi
+        _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+        ;;
+    esac
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+    ;;
+  linux*)
+    case $cc_basename in
+      KCC)
+        # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+        # KCC will only create a shared library if the output file
+        # ends with ".so" (or ".sl" for HP-UX), so rename the library
+        # to its proper name (with version) after linking.
+        _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+        _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+        # Commands to make compiler produce verbose output that lists
+        # what "hidden" libraries, object files and flags are used when
+        # linking a shared library.
+        #
+        # There doesn't appear to be a way to prevent this compiler from
+        # explicitly linking system object files so we need to strip them
+        # from the output so that they don't get included in the library
+        # dependencies.
+        output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+
+        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
+        _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+        # Archives containing C++ object files must be created using
+        # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+        _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+        ;;
+      icpc)
+        # Intel C++
+        with_gnu_ld=yes
+        _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+        _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+        _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+        ;;
+      cxx)
+        # Compaq C++
+        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+
+        runpath_var=LD_RUN_PATH
+        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+        _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+        # Commands to make compiler produce verbose output that lists
+        # what "hidden" libraries, object files and flags are used when
+        # linking a shared library.
+        #
+        # There doesn't appear to be a way to prevent this compiler from
+        # explicitly linking system object files so we need to strip them
+        # from the output so that they don't get included in the library
+        # dependencies.
+        output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+        ;;
+    esac
+    ;;
+  lynxos*)
+    # FIXME: insert proper C++ library support
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  m88k*)
+    # FIXME: insert proper C++ library support
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  mvs*)
+    case $cc_basename in
+      cxx)
+        # FIXME: insert proper C++ library support
+        _LT_AC_TAGVAR(ld_shlibs, $1)=no
+        ;;
+      *)
+        # FIXME: insert proper C++ library support
+        _LT_AC_TAGVAR(ld_shlibs, $1)=no
+        ;;
+    esac
+    ;;
+  netbsd* | knetbsd*-gnu)
+    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+      wlarc=
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+    fi
+    # Workaround some broken pre-1.5 toolchains
+    output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+    ;;
+  osf3*)
+    case $cc_basename in
+      KCC)
+        # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+        # KCC will only create a shared library if the output file
+        # ends with ".so" (or ".sl" for HP-UX), so rename the library
+        # to its proper name (with version) after linking.
+        _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+        _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+        # Archives containing C++ object files must be created using
+        # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+        _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+
+        ;;
+      RCC)
+        # Rational C++ 2.4.1
+        # FIXME: insert proper C++ library support
+        _LT_AC_TAGVAR(ld_shlibs, $1)=no
+        ;;
+      cxx)
+        _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+
+        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+        _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+        # Commands to make compiler produce verbose output that lists
+        # what "hidden" libraries, object files and flags are used when
+        # linking a shared library.
+        #
+        # There doesn't appear to be a way to prevent this compiler from
+        # explicitly linking system object files so we need to strip them
+        # from the output so that they don't get included in the library
+        # dependencies.
+        output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+        ;;
+      *)
+        if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+          _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+
+          _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+          _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+          # Commands to make compiler produce verbose output that lists
+          # what "hidden" libraries, object files and flags are used when
+          # linking a shared library.
+          output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+
+        else
+          # FIXME: insert proper C++ library support
+          _LT_AC_TAGVAR(ld_shlibs, $1)=no
+        fi
+        ;;
+    esac
+    ;;
+  osf4* | osf5*)
+    case $cc_basename in
+      KCC)
+        # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+        # KCC will only create a shared library if the output file
+        # ends with ".so" (or ".sl" for HP-UX), so rename the library
+        # to its proper name (with version) after linking.
+        _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+        _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+        # Archives containing C++ object files must be created using
+        # the KAI C++ compiler.
+        _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
+        ;;
+      RCC)
+        # Rational C++ 2.4.1
+        # FIXME: insert proper C++ library support
+        _LT_AC_TAGVAR(ld_shlibs, $1)=no
+        ;;
+      cxx)
+        _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+        _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+          echo "-hidden">> $lib.exp~
+          $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~
+          $rm $lib.exp'
+
+        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+        _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+        # Commands to make compiler produce verbose output that lists
+        # what "hidden" libraries, object files and flags are used when
+        # linking a shared library.
+        #
+        # There doesn't appear to be a way to prevent this compiler from
+        # explicitly linking system object files so we need to strip them
+        # from the output so that they don't get included in the library
+        # dependencies.
+        output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+        ;;
+      *)
+        if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+          _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+
+          _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+          _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+          # Commands to make compiler produce verbose output that lists
+          # what "hidden" libraries, object files and flags are used when
+          # linking a shared library.
+          output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+
+        else
+          # FIXME: insert proper C++ library support
+          _LT_AC_TAGVAR(ld_shlibs, $1)=no
+        fi
+        ;;
+    esac
+    ;;
+  psos*)
+    # FIXME: insert proper C++ library support
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  sco*)
+    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+    case $cc_basename in
+      CC)
+        # FIXME: insert proper C++ library support
+        _LT_AC_TAGVAR(ld_shlibs, $1)=no
+        ;;
+      *)
+        # FIXME: insert proper C++ library support
+        _LT_AC_TAGVAR(ld_shlibs, $1)=no
+        ;;
+    esac
+    ;;
+  sunos4*)
+    case $cc_basename in
+      CC)
+        # Sun C++ 4.x
+        # FIXME: insert proper C++ library support
+        _LT_AC_TAGVAR(ld_shlibs, $1)=no
+        ;;
+      lcc)
+        # Lucid
+        # FIXME: insert proper C++ library support
+        _LT_AC_TAGVAR(ld_shlibs, $1)=no
+        ;;
+      *)
+        # FIXME: insert proper C++ library support
+        _LT_AC_TAGVAR(ld_shlibs, $1)=no
+        ;;
+    esac
+    ;;
+  solaris*)
+    case $cc_basename in
+      CC)
+        # Sun C++ 4.2, 5.x and Centerline C++
+        _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+        _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+        $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+        _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+        case $host_os in
+          solaris2.[0-5] | solaris2.[0-5].*) ;;
+          *)
+            # The C++ compiler is used as linker so we must use $wl
+            # flag to pass the commands to the underlying system
+            # linker.
+            # Supported since Solaris 2.6 (maybe 2.5.1?)
+            _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+            ;;
+        esac
+        _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+
+        # Commands to make compiler produce verbose output that lists
+        # what "hidden" libraries, object files and flags are used when
+        # linking a shared library.
+        #
+        # There doesn't appear to be a way to prevent this compiler from
+        # explicitly linking system object files so we need to strip them
+        # from the output so that they don't get included in the library
+        # dependencies.
+        output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[[LR]]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+
+        # Archives containing C++ object files must be created using
+        # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+        # necessary to make sure instantiated templates are included
+        # in the archive.
+        _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+        ;;
+      gcx)
+        # Green Hills C++ Compiler
+        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+
+        # The C++ compiler must be used to create the archive.
+        _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+        ;;
+      *)
+        # GNU C++ compiler with Solaris linker
+        if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+          _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+          if $CC --version | grep -v '^2\.7' > /dev/null; then
+            _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+            _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+                $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+            # Commands to make compiler produce verbose output that lists
+            # what "hidden" libraries, object files and flags are used when
+            # linking a shared library.
+            output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
+          else
+            # g++ 2.7 appears to require `-G' NOT `-shared' on this
+            # platform.
+            _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+            _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+                $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+            # Commands to make compiler produce verbose output that lists
+            # what "hidden" libraries, object files and flags are used when
+            # linking a shared library.
+            output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
+          fi
+
+          _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+        fi
+        ;;
+    esac
+    ;;
+  sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
+    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+    ;;
+  tandem*)
+    case $cc_basename in
+      NCC)
+        # NonStop-UX NCC 3.20
+        # FIXME: insert proper C++ library support
+        _LT_AC_TAGVAR(ld_shlibs, $1)=no
+        ;;
+      *)
+        # FIXME: insert proper C++ library support
+        _LT_AC_TAGVAR(ld_shlibs, $1)=no
+        ;;
+    esac
+    ;;
+  vxworks*)
+    # FIXME: insert proper C++ library support
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  *)
+    # FIXME: insert proper C++ library support
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+esac
+AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
+test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+_LT_AC_TAGVAR(GCC, $1)="$GXX"
+_LT_AC_TAGVAR(LD, $1)="$LD"
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+AC_LIBTOOL_POSTDEP_PREDEP($1)
+AC_LIBTOOL_PROG_COMPILER_PIC($1)
+AC_LIBTOOL_PROG_CC_C_O($1)
+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
+AC_LIBTOOL_PROG_LD_SHLIBS($1)
+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+AC_LIBTOOL_SYS_LIB_STRIP
+AC_LIBTOOL_DLOPEN_SELF($1)
+
+AC_LIBTOOL_CONFIG($1)
+
+AC_LANG_POP
+CC=$lt_save_CC
+LDCXX=$LD
+LD=$lt_save_LD
+GCC=$lt_save_GCC
+with_gnu_ldcxx=$with_gnu_ld
+with_gnu_ld=$lt_save_with_gnu_ld
+lt_cv_path_LDCXX=$lt_cv_path_LD
+lt_cv_path_LD=$lt_save_path_LD
+lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+])# AC_LIBTOOL_LANG_CXX_CONFIG
+
+# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
+# ------------------------
+# Figure out "hidden" library dependencies from verbose
+# compiler output when linking a shared library.
+# Parse the compiler output and extract the necessary
+# objects, libraries and library flags.
+AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[
+dnl we can't use the lt_simple_compile_test_code here,
+dnl because it contains code intended for an executable,
+dnl not a library.  It's possible we should let each
+dnl tag define a new lt_????_link_test_code variable,
+dnl but it's only used here...
+ifelse([$1],[],[cat > conftest.$ac_ext <<EOF
+int a;
+void foo (void) { a = 0; }
+EOF
+],[$1],[CXX],[cat > conftest.$ac_ext <<EOF
+class Foo
+{
+public:
+  Foo (void) { a = 0; }
+private:
+  int a;
+};
+EOF
+],[$1],[F77],[cat > conftest.$ac_ext <<EOF
+      subroutine foo
+      implicit none
+      integer*4 a
+      a=0
+      return
+      end
+EOF
+],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF
+public class foo {
+  private int a;
+  public void bar (void) {
+    a = 0;
+  }
+};
+EOF
+])
+dnl Parse the compiler output and extract the necessary
+dnl objects, libraries and library flags.
+if AC_TRY_EVAL(ac_compile); then
+  # Parse the compiler output and extract the necessary
+  # objects, libraries and library flags.
+
+  # Sentinel used to keep track of whether or not we are before
+  # the conftest object file.
+  pre_test_object_deps_done=no
+
+  # The `*' in the case matches for architectures that use `case' in
+  # $output_verbose_cmd can trigger glob expansion during the loop
+  # eval without this substitution.
+  output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`"
+
+  for p in `eval $output_verbose_link_cmd`; do
+    case $p in
+
+    -L* | -R* | -l*)
+       # Some compilers place space between "-{L,R}" and the path.
+       # Remove the space.
+       if test $p = "-L" \
+          || test $p = "-R"; then
+         prev=$p
+         continue
+       else
+         prev=
+       fi
+
+       if test "$pre_test_object_deps_done" = no; then
+         case $p in
+         -L* | -R*)
+           # Internal compiler library paths should come after those
+           # provided the user.  The postdeps already come after the
+           # user supplied libs so there is no need to process them.
+           if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
+             _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
+           else
+             _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
+           fi
+           ;;
+         # The "-l" case would never come before the object being
+         # linked, so don't bother handling this case.
+         esac
+       else
+         if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
+           _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
+         else
+           _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
+         fi
+       fi
+       ;;
+
+    *.$objext)
+       # This assumes that the test object file only shows up
+       # once in the compiler output.
+       if test "$p" = "conftest.$objext"; then
+         pre_test_object_deps_done=yes
+         continue
+       fi
+
+       if test "$pre_test_object_deps_done" = no; then
+         if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
+           _LT_AC_TAGVAR(predep_objects, $1)="$p"
+         else
+           _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
+         fi
+       else
+         if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
+           _LT_AC_TAGVAR(postdep_objects, $1)="$p"
+         else
+           _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
+         fi
+       fi
+       ;;
+
+    *) ;; # Ignore the rest.
+
+    esac
+  done
+
+  # Clean up.
+  rm -f a.out a.exe
+else
+  echo "libtool.m4: error: problem compiling $1 test program"
+fi
+
+$rm -f confest.$objext
+
+case " $_LT_AC_TAGVAR(postdeps, $1) " in
+*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
+esac
+])# AC_LIBTOOL_POSTDEP_PREDEP
+
+# AC_LIBTOOL_LANG_F77_CONFIG
+# ------------------------
+# Ensure that the configuration vars for the C compiler are
+# suitably defined.  Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])
+AC_DEFUN([_LT_AC_LANG_F77_CONFIG],
+[AC_REQUIRE([AC_PROG_F77])
+AC_LANG_PUSH(Fortran 77)
+
+_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_AC_TAGVAR(allow_undefined_flag, $1)=
+_LT_AC_TAGVAR(always_export_symbols, $1)=no
+_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
+_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_AC_TAGVAR(hardcode_direct, $1)=no
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
+_LT_AC_TAGVAR(hardcode_automatic, $1)=no
+_LT_AC_TAGVAR(module_cmds, $1)=
+_LT_AC_TAGVAR(module_expsym_cmds, $1)=
+_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_AC_TAGVAR(no_undefined_flag, $1)=
+_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for f77 test sources.
+ac_ext=f
+
+# Object file extension for compiled f77 test sources.
+objext=o
+_LT_AC_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="      subroutine t\n      return\n      end\n"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="      program t\n      end\n"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_AC_SYS_COMPILER
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+CC=${F77-"f77"}
+compiler=$CC
+_LT_AC_TAGVAR(compiler, $1)=$CC
+cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
+
+AC_MSG_CHECKING([if libtool supports shared libraries])
+AC_MSG_RESULT([$can_build_shared])
+
+AC_MSG_CHECKING([whether to build shared libraries])
+test "$can_build_shared" = "no" && enable_shared=no
+
+# On AIX, shared libraries and static libraries use the same namespace, and
+# are all built from PIC.
+case "$host_os" in
+aix3*)
+  test "$enable_shared" = yes && enable_static=no
+  if test -n "$RANLIB"; then
+    archive_cmds="$archive_cmds~\$RANLIB \$lib"
+    postinstall_cmds='$RANLIB $lib'
+  fi
+  ;;
+aix4* | aix5*)
+  test "$enable_shared" = yes && enable_static=no
+  ;;
+esac
+AC_MSG_RESULT([$enable_shared])
+
+AC_MSG_CHECKING([whether to build static libraries])
+# Make sure either enable_shared or enable_static is yes.
+test "$enable_shared" = yes || enable_static=yes
+AC_MSG_RESULT([$enable_static])
+
+test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+_LT_AC_TAGVAR(GCC, $1)="$G77"
+_LT_AC_TAGVAR(LD, $1)="$LD"
+
+AC_LIBTOOL_PROG_COMPILER_PIC($1)
+AC_LIBTOOL_PROG_CC_C_O($1)
+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
+AC_LIBTOOL_PROG_LD_SHLIBS($1)
+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+AC_LIBTOOL_SYS_LIB_STRIP
+
+
+AC_LIBTOOL_CONFIG($1)
+
+AC_LANG_POP
+CC="$lt_save_CC"
+])# AC_LIBTOOL_LANG_F77_CONFIG
+
+
+# AC_LIBTOOL_LANG_GCJ_CONFIG
+# --------------------------
+# Ensure that the configuration vars for the C compiler are
+# suitably defined.  Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
+AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
+[AC_LANG_SAVE
+
+# Source file extension for Java test sources.
+ac_ext=java
+
+# Object file extension for compiled Java test sources.
+objext=o
+_LT_AC_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="class foo {}\n"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_AC_SYS_COMPILER
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+CC=${GCJ-"gcj"}
+compiler=$CC
+_LT_AC_TAGVAR(compiler, $1)=$CC
+
+# GCJ did not exist at the time GCC didn't implicitly link libc in.
+_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
+AC_LIBTOOL_PROG_COMPILER_PIC($1)
+AC_LIBTOOL_PROG_CC_C_O($1)
+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
+AC_LIBTOOL_PROG_LD_SHLIBS($1)
+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+AC_LIBTOOL_SYS_LIB_STRIP
+AC_LIBTOOL_DLOPEN_SELF($1)
+
+AC_LIBTOOL_CONFIG($1)
+
+AC_LANG_RESTORE
+CC="$lt_save_CC"
+])# AC_LIBTOOL_LANG_GCJ_CONFIG
+
+
+# AC_LIBTOOL_LANG_RC_CONFIG
+# --------------------------
+# Ensure that the configuration vars for the Windows resource compiler are
+# suitably defined.  Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
+AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
+[AC_LANG_SAVE
+
+# Source file extension for RC test sources.
+ac_ext=rc
+
+# Object file extension for compiled RC test sources.
+objext=o
+_LT_AC_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="$lt_simple_compile_test_code"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_AC_SYS_COMPILER
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+CC=${RC-"windres"}
+compiler=$CC
+_LT_AC_TAGVAR(compiler, $1)=$CC
+_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+
+AC_LIBTOOL_CONFIG($1)
+
+AC_LANG_RESTORE
+CC="$lt_save_CC"
+])# AC_LIBTOOL_LANG_RC_CONFIG
+
+
+# AC_LIBTOOL_CONFIG([TAGNAME])
+# ----------------------------
+# If TAGNAME is not passed, then create an initial libtool script
+# with a default configuration from the untagged config vars.  Otherwise
+# add code to config.status for appending the configuration named by
+# TAGNAME from the matching tagged config vars.
+AC_DEFUN([AC_LIBTOOL_CONFIG],
+[# The else clause should only fire when bootstrapping the
+# libtool distribution, otherwise you forgot to ship ltmain.sh
+# with your package, and you will get complaints that there are
+# no rules to generate ltmain.sh.
+if test -f "$ltmain"; then
+  # See if we are running on zsh, and set the options which allow our commands through
+  # without removal of \ escapes.
+  if test -n "${ZSH_VERSION+set}" ; then
+    setopt NO_GLOB_SUBST
+  fi
+  # Now quote all the things that may contain metacharacters while being
+  # careful not to overquote the AC_SUBSTed values.  We take copies of the
+  # variables and quote the copies for generation of the libtool script.
+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \
+    SED SHELL STRIP \
+    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
+    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
+    deplibs_check_method reload_flag reload_cmds need_locks \
+    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
+    lt_cv_sys_global_symbol_to_c_name_address \
+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+    old_postinstall_cmds old_postuninstall_cmds \
+    _LT_AC_TAGVAR(compiler, $1) \
+    _LT_AC_TAGVAR(CC, $1) \
+    _LT_AC_TAGVAR(LD, $1) \
+    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
+    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
+    _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
+    _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
+    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
+    _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
+    _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
+    _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \
+    _LT_AC_TAGVAR(old_archive_cmds, $1) \
+    _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
+    _LT_AC_TAGVAR(predep_objects, $1) \
+    _LT_AC_TAGVAR(postdep_objects, $1) \
+    _LT_AC_TAGVAR(predeps, $1) \
+    _LT_AC_TAGVAR(postdeps, $1) \
+    _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
+    _LT_AC_TAGVAR(archive_cmds, $1) \
+    _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
+    _LT_AC_TAGVAR(postinstall_cmds, $1) \
+    _LT_AC_TAGVAR(postuninstall_cmds, $1) \
+    _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
+    _LT_AC_TAGVAR(allow_undefined_flag, $1) \
+    _LT_AC_TAGVAR(no_undefined_flag, $1) \
+    _LT_AC_TAGVAR(export_symbols_cmds, $1) \
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \
+    _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
+    _LT_AC_TAGVAR(hardcode_automatic, $1) \
+    _LT_AC_TAGVAR(module_cmds, $1) \
+    _LT_AC_TAGVAR(module_expsym_cmds, $1) \
+    _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
+    _LT_AC_TAGVAR(exclude_expsyms, $1) \
+    _LT_AC_TAGVAR(include_expsyms, $1); do
+
+    case $var in
+    _LT_AC_TAGVAR(old_archive_cmds, $1) | \
+    _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
+    _LT_AC_TAGVAR(archive_cmds, $1) | \
+    _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
+    _LT_AC_TAGVAR(module_cmds, $1) | \
+    _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
+    _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
+    _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
+    extract_expsyms_cmds | reload_cmds | finish_cmds | \
+    postinstall_cmds | postuninstall_cmds | \
+    old_postinstall_cmds | old_postuninstall_cmds | \
+    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+      # Double-quote double-evaled strings.
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
+      ;;
+    *)
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+      ;;
+    esac
+  done
+
+  case $lt_echo in
+  *'\[$]0 --fallback-echo"')
+    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
+    ;;
+  esac
+
+ifelse([$1], [],
+  [cfgfile="${ofile}T"
+  trap "$rm \"$cfgfile\"; exit 1" 1 2 15
+  $rm -f "$cfgfile"
+  AC_MSG_NOTICE([creating $ofile])],
+  [cfgfile="$ofile"])
+
+  cat <<__EOF__ >> "$cfgfile"
+ifelse([$1], [],
+[#! $SHELL
+
+# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
+#
+# This file is part of GNU Libtool:
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# A sed program that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="$SED -e s/^X//"
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+
+# The names of the tagged configurations supported by this script.
+available_tags=
+
+# ### BEGIN LIBTOOL CONFIG],
+[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
+
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
+
+# Whether or not to disallow shared libs when runtime libs are static
+allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+
+# An echo program that does not interpret backslashes.
+echo=$lt_echo
+
+# The archiver.
+AR=$lt_AR
+AR_FLAGS=$lt_AR_FLAGS
+
+# A C compiler.
+LTCC=$lt_LTCC
+
+# A language-specific compiler.
+CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
+
+# Is the compiler the GNU C compiler?
+with_gcc=$_LT_AC_TAGVAR(GCC, $1)
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# The linker used to build libraries.
+LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
+
+# Whether we need hard or soft links.
+LN_S=$lt_LN_S
+
+# A BSD-compatible nm program.
+NM=$lt_NM
+
+# A symbol stripping program
+STRIP=$lt_STRIP
+
+# Used to examine libraries when file_magic_cmd begins "file"
+MAGIC_CMD=$MAGIC_CMD
+
+# Used on cygwin: DLL creation program.
+DLLTOOL="$DLLTOOL"
+
+# Used on cygwin: object dumper.
+OBJDUMP="$OBJDUMP"
+
+# Used on cygwin: assembler.
+AS="$AS"
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# How to pass a linker flag through the compiler.
+wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
+
+# Object file suffix (normally "o").
+objext="$ac_objext"
+
+# Old archive suffix (normally "a").
+libext="$libext"
+
+# Shared library suffix (normally ".so").
+shrext_cmds='$shrext_cmds'
+
+# Executable file suffix (normally "").
+exeext="$exeext"
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
+pic_mode=$pic_mode
+
+# What is the maximum length of a command?
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
+
+# Must we lock files when doing compilation ?
+need_locks=$lt_need_locks
+
+# Do we need the lib prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
+
+# Compiler flag to generate thread-safe objects.
+thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
+
+# Library versioning type.
+version_type=$version_type
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME.
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Commands used to build and install an old-style archive.
+RANLIB=$lt_RANLIB
+old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
+
+# Commands used to build and install a shared archive.
+archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
+archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
+postinstall_cmds=$lt_postinstall_cmds
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to build a loadable module (assumed same as above if empty)
+module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)
+module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method == file_magic.
+file_magic_cmd=$lt_file_magic_cmd
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
+
+# Flag that forces no undefined symbols.
+no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# Same as above, but a single script fragment to be evaled but not shown.
+finish_eval=$lt_finish_eval
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# This is the shared library runtime path variable.
+runpath_var=$runpath_var
+
+# This is the shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
+
+# If ld is used when linking, flag to hardcode \$libdir into
+# a binary during linking. This must work even if \$libdir does
+# not exist.
+hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
+
+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
+
+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+# the resulting binary.
+hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
+
+# Set to yes if building a shared library automatically hardcodes DIR into the library
+# and all subsequent libraries and executables linked against it.
+hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at relink time.
+variables_saved_for_relink="$variables_saved_for_relink"
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
+
+# Compile-time system search path for libraries
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)"
+
+# Set to yes if exported symbols are required.
+always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
+
+# Symbols that must always be exported.
+include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
+
+ifelse([$1],[],
+[# ### END LIBTOOL CONFIG],
+[# ### END LIBTOOL TAG CONFIG: $tagname])
+
+__EOF__
+
+ifelse([$1],[], [
+  case $host_os in
+  aix3*)
+    cat <<\EOF >> "$cfgfile"
+
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+EOF
+    ;;
+  esac
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
+
+  mv -f "$cfgfile" "$ofile" || \
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+])
+else
+  # If there is no Makefile yet, we rely on a make rule to execute
+  # `config.status --recheck' to rerun these tests and create the
+  # libtool script then.
+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
+  if test -f "$ltmain_in"; then
+    test -f Makefile && make "$ltmain"
+  fi
+fi
+])# AC_LIBTOOL_CONFIG
+
+
+# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
+# -------------------------------------------
+AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
+[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+
+_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+
+if test "$GCC" = yes; then
+  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+
+  AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
+    lt_cv_prog_compiler_rtti_exceptions,
+    [-fno-rtti -fno-exceptions], [],
+    [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
+fi
+])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
+
+
+# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
+# ---------------------------------
+AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
+[AC_REQUIRE([AC_CANONICAL_HOST])
+AC_REQUIRE([AC_PROG_NM])
+AC_REQUIRE([AC_OBJEXT])
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+AC_MSG_CHECKING([command to parse $NM output from $compiler object])
+AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
+[
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[[BCDEGRST]]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
+
+# Transform the above into a raw symbol and a C symbol.
+symxfrm='\1 \2\3 \3'
+
+# Transform an extracted symbol line into a proper C declaration
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[[BCDT]]'
+  ;;
+cygwin* | mingw* | pw32*)
+  symcode='[[ABCDGISTW]]'
+  ;;
+hpux*) # Its linker distinguishes data from code symbols
+  if test "$host_cpu" = ia64; then
+    symcode='[[ABCDEGRST]]'
+  fi
+  lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+  lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+  ;;
+irix* | nonstopux*)
+  symcode='[[BCDEGRST]]'
+  ;;
+osf*)
+  symcode='[[BCDEGQRST]]'
+  ;;
+solaris* | sysv5*)
+  symcode='[[BDRT]]'
+  ;;
+sysv4)
+  symcode='[[DFNSTU]]'
+  ;;
+esac
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[[ABCDGIRSTW]]' ;;
+esac
+
+# Try without a prefix undercore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Write the raw and C identifiers.
+  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[      ]]\($symcode$symcode*\)[[       ]][[    ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+
+  rm -f conftest*
+  cat > conftest.$ac_ext <<EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+EOF
+
+  if AC_TRY_EVAL(ac_compile); then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+        mv -f "$nlist"T "$nlist"
+      else
+        rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if grep ' nm_test_var$' "$nlist" >/dev/null; then
+        if grep ' nm_test_func$' "$nlist" >/dev/null; then
+          cat <<EOF > conftest.$ac_ext
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+EOF
+          # Now generate the symbol file.
+          eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
+
+          cat <<EOF >> conftest.$ac_ext
+#if defined (__STDC__) && __STDC__
+# define lt_ptr_t void *
+#else
+# define lt_ptr_t char *
+# define const
+#endif
+
+/* The mapping between symbol names and symbols. */
+const struct {
+  const char *name;
+  lt_ptr_t address;
+}
+lt_preloaded_symbols[[]] =
+{
+EOF
+          $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
+          cat <<\EOF >> conftest.$ac_ext
+  {0, (lt_ptr_t) 0}
+};
+
+#ifdef __cplusplus
+}
+#endif
+EOF
+          # Now try linking the two files.
+          mv conftest.$ac_objext conftstm.$ac_objext
+          lt_save_LIBS="$LIBS"
+          lt_save_CFLAGS="$CFLAGS"
+          LIBS="conftstm.$ac_objext"
+          CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
+          if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
+            pipe_works=yes
+          fi
+          LIBS="$lt_save_LIBS"
+          CFLAGS="$lt_save_CFLAGS"
+        else
+          echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
+        fi
+      else
+        echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
+    fi
+  else
+    echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
+    cat conftest.$ac_ext >&5
+  fi
+  rm -f conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+])
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+  AC_MSG_RESULT(failed)
+else
+  AC_MSG_RESULT(ok)
+fi
+]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
+
+
+# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
+# ---------------------------------------
+AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
+[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
+_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
+
+AC_MSG_CHECKING([for $compiler option to produce PIC])
+ ifelse([$1],[CXX],[
+  # C++ specific cases for pic, static, wl, etc.
+  if test "$GXX" = yes; then
+    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+    case $host_os in
+    aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+        # AIX 5 now supports IA64 processor
+        _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      fi
+      ;;
+    amigaos*)
+      # FIXME: we need at least 68020 code to build shared libraries, but
+      # adding the `-m68020' flag to GCC prevents building anything better,
+      # like `-m68040'.
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+      ;;
+    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+    mingw* | os2* | pw32*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
+      ;;
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+      ;;
+    *djgpp*)
+      # DJGPP does not support shared libraries at all
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+      ;;
+    sysv4*MP*)
+      if test -d /usr/nec; then
+        _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+      fi
+      ;;
+    hpux*)
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case "$host_cpu" in
+      hppa*64*|ia64*)
+        ;;
+      *)
+        _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+        ;;
+      esac
+      ;;
+    *)
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+      ;;
+    esac
+  else
+    case $host_os in
+      aix4* | aix5*)
+        # All AIX code is PIC.
+        if test "$host_cpu" = ia64; then
+          # AIX 5 now supports IA64 processor
+          _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+        else
+          _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+        fi
+        ;;
+      chorus*)
+        case $cc_basename in
+        cxch68)
+          # Green Hills C++ Compiler
+          # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+          ;;
+        esac
+        ;;
+      dgux*)
+        case $cc_basename in
+          ec++)
+            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+            ;;
+          ghcx)
+            # Green Hills C++ Compiler
+            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+            ;;
+          *)
+            ;;
+        esac
+        ;;
+      freebsd* | kfreebsd*-gnu)
+        # FreeBSD uses GNU C++
+        ;;
+      hpux9* | hpux10* | hpux11*)
+        case $cc_basename in
+          CC)
+            _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+            _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
+            if test "$host_cpu" != ia64; then
+              _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+            fi
+            ;;
+          aCC)
+            _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+            _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
+            case "$host_cpu" in
+            hppa*64*|ia64*)
+              # +Z the default
+              ;;
+            *)
+              _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+              ;;
+            esac
+            ;;
+          *)
+            ;;
+        esac
+        ;;
+      irix5* | irix6* | nonstopux*)
+        case $cc_basename in
+          CC)
+            _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+            _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+            # CC pic flag -KPIC is the default.
+            ;;
+          *)
+            ;;
+        esac
+        ;;
+      linux*)
+        case $cc_basename in
+          KCC)
+            # KAI C++ Compiler
+            _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+            ;;
+          icpc)
+            # Intel C++
+            _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+            _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+            ;;
+          cxx)
+            # Compaq C++
+            # Make sure the PIC flag is empty.  It appears that all Alpha
+            # Linux and Compaq Tru64 Unix objects are PIC.
+            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+            _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+            ;;
+          *)
+            ;;
+        esac
+        ;;
+      lynxos*)
+        ;;
+      m88k*)
+        ;;
+      mvs*)
+        case $cc_basename in
+          cxx)
+            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
+            ;;
+          *)
+            ;;
+        esac
+        ;;
+      netbsd* | knetbsd*-gnu)
+        ;;
+      osf3* | osf4* | osf5*)
+        case $cc_basename in
+          KCC)
+            _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+            ;;
+          RCC)
+            # Rational C++ 2.4.1
+            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+            ;;
+          cxx)
+            # Digital/Compaq C++
+            _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+            # Make sure the PIC flag is empty.  It appears that all Alpha
+            # Linux and Compaq Tru64 Unix objects are PIC.
+            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+            _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+            ;;
+          *)
+            ;;
+        esac
+        ;;
+      psos*)
+        ;;
+      sco*)
+        case $cc_basename in
+          CC)
+            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+            ;;
+          *)
+            ;;
+        esac
+        ;;
+      solaris*)
+        case $cc_basename in
+          CC)
+            # Sun C++ 4.2, 5.x and Centerline C++
+            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+            _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+            _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+            ;;
+          gcx)
+            # Green Hills C++ Compiler
+            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+            ;;
+          *)
+            ;;
+        esac
+        ;;
+      sunos4*)
+        case $cc_basename in
+          CC)
+            # Sun C++ 4.x
+            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+            _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+            ;;
+          lcc)
+            # Lucid
+            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+            ;;
+          *)
+            ;;
+        esac
+        ;;
+      tandem*)
+        case $cc_basename in
+          NCC)
+            # NonStop-UX NCC 3.20
+            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+            ;;
+          *)
+            ;;
+        esac
+        ;;
+      unixware*)
+        ;;
+      vxworks*)
+        ;;
+      *)
+        _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+        ;;
+    esac
+  fi
+],
+[
+  if test "$GCC" = yes; then
+    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+        # AIX 5 now supports IA64 processor
+        _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      # FIXME: we need at least 68020 code to build shared libraries, but
+      # adding the `-m68020' flag to GCC prevents building anything better,
+      # like `-m68040'.
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+      ;;
+
+    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      enable_shared=no
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+        _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+      fi
+      ;;
+
+    hpux*)
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case "$host_cpu" in
+      hppa*64*|ia64*)
+        # +Z the default
+        ;;
+      *)
+        _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+        ;;
+      esac
+      ;;
+
+    *)
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      if test "$host_cpu" = ia64; then
+        # AIX 5 now supports IA64 processor
+        _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      else
+        _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+
+    mingw* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case "$host_cpu" in
+      hppa*64*|ia64*)
+        # +Z the default
+        ;;
+      *)
+        _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+        ;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # PIC (with -KPIC) is the default.
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      ;;
+
+    newsos6)
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    linux*)
+      case $CC in
+      icc* | ecc*)
+        _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+        _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+        _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+        ;;
+      ccc*)
+        _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+        # All Alpha code is PIC.
+        _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+        ;;
+      esac
+      ;;
+
+    osf3* | osf4* | osf5*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # All OSF/1 code is PIC.
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      ;;
+
+    sco3.2v5*)
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic'
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn'
+      ;;
+
+    solaris*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    sunos4*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+        _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
+        _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      fi
+      ;;
+
+    uts4*)
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    *)
+      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      ;;
+    esac
+  fi
+])
+AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
+  AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
+    _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1),
+    [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
+    [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
+     "" | " "*) ;;
+     *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
+     esac],
+    [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+     _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
+fi
+case "$host_os" in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+    ;;
+  *)
+    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
+    ;;
+esac
+])
+
+
+# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
+# ------------------------------------
+# See if the linker supports building shared libraries.
+AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
+[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+ifelse([$1],[CXX],[
+  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  case $host_os in
+  aix4* | aix5*)
+    # If we're using GNU nm, then we don't want the "-C" option.
+    # -C means demangle to AIX nm, but means don't demangle with GNU nm
+    if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
+      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+    else
+      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+    fi
+    ;;
+  pw32*)
+    _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
+  ;;
+  cygwin* | mingw*)
+    _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
+  ;;
+  linux*)
+    _LT_AC_TAGVAR(link_all_deplibs, $1)=no
+  ;;
+  *)
+    _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  ;;
+  esac
+],[
+  runpath_var=
+  _LT_AC_TAGVAR(allow_undefined_flag, $1)=
+  _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+  _LT_AC_TAGVAR(archive_cmds, $1)=
+  _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
+  _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
+  _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
+  _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
+  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+  _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
+  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+  _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+  _LT_AC_TAGVAR(hardcode_direct, $1)=no
+  _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
+  _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+  _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
+  _LT_AC_TAGVAR(hardcode_automatic, $1)=no
+  _LT_AC_TAGVAR(module_cmds, $1)=
+  _LT_AC_TAGVAR(module_expsym_cmds, $1)=
+  _LT_AC_TAGVAR(always_export_symbols, $1)=no
+  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  _LT_AC_TAGVAR(include_expsyms, $1)=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_"
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  extract_expsyms_cmds=
+
+  case $host_os in
+  cygwin* | mingw* | pw32*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  _LT_AC_TAGVAR(ld_shlibs, $1)=yes
+  if test "$with_gnu_ld" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix3* | aix4* | aix5*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+        _LT_AC_TAGVAR(ld_shlibs, $1)=no
+        cat <<EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+
+EOF
+      fi
+      ;;
+
+    amigaos*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+
+      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
+      # that the semantics of dynamic libraries on AmigaOS, at least up
+      # to version 4, is to share data among multiple programs linked
+      # with the same dynamic library.  Since this doesn't match the
+      # behavior of shared libraries on other platforms, we can't use
+      # them.
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+        _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+        # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+        # support --undefined.  This deserves some investigation.  FIXME
+        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+        _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32*)
+      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+      # as there is no search path for DLLs.
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_AC_TAGVAR(always_export_symbols, $1)=no
+      _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
+
+      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
+        # If the export-symbols file already is a .def file (1st line
+        # is EXPORTS), use it as is; otherwise, prepend...
+        _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+          cp $export_symbols $output_objdir/$soname.def;
+        else
+          echo EXPORTS > $output_objdir/$soname.def;
+          cat $export_symbols >> $output_objdir/$soname.def;
+        fi~
+        $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000  ${wl}--out-implib,$lib'
+      else
+        ld_shlibs=no
+      fi
+      ;;
+
+    netbsd* | knetbsd*-gnu)
+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+        _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+        wlarc=
+      else
+        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris* | sysv5*)
+      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
+        _LT_AC_TAGVAR(ld_shlibs, $1)=no
+        cat <<EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+EOF
+      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+        _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    sunos4*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+  linux*)
+    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+        tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        _LT_AC_TAGVAR(archive_cmds, $1)="$tmp_archive_cmds"
+      supports_anon_versioning=no
+      case `$LD -v 2>/dev/null` in
+        *\ [01].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
+        *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+        *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+        *\ 2.11.*) ;; # other 2.11 versions
+        *) supports_anon_versioning=yes ;;
+      esac
+      if test $supports_anon_versioning = yes; then
+        _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~
+cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+$echo "local: *; };" >> $output_objdir/$libname.ver~
+        $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+      else
+        _LT_AC_TAGVAR(archive_expsym_cmds, $1)="$tmp_archive_cmds"
+      fi
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=no
+    else
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    fi
+    ;;
+
+    *)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+        _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+    esac
+
+    if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then
+      runpath_var=LD_RUN_PATH
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+      # ancient GNU ld didn't support --whole-archive et. al.
+      if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
+        _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      else
+        _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+      fi
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      if test "$GCC" = yes && test -z "$link_static_flag"; then
+        # Neither direct hardcoding nor static linking is supported with a
+        # broken collect2.
+        _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
+      fi
+      ;;
+
+    aix4* | aix5*)
+      if test "$host_cpu" = ia64; then
+        # On IA64, the linker does run time linking by default, so we don't
+        # have to do anything special.
+        aix_use_runtimelinking=no
+        exp_sym_flag='-Bexport'
+        no_entry_flag=""
+      else
+        # If we're using GNU nm, then we don't want the "-C" option.
+        # -C means demangle to AIX nm, but means don't demangle with GNU nm
+        if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
+          _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+        else
+          _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+        fi
+        aix_use_runtimelinking=no
+
+        # Test if we are trying to use run time linking or normal
+        # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+        # need to do runtime linking.
+        case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
+          for ld_flag in $LDFLAGS; do
+          if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+            aix_use_runtimelinking=yes
+            break
+          fi
+          done
+        esac
+
+        exp_sym_flag='-bexport'
+        no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      _LT_AC_TAGVAR(archive_cmds, $1)=''
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+
+      if test "$GCC" = yes; then
+        case $host_os in aix4.[012]|aix4.[012].*)
+        # We only want to do this on AIX 4.2 and lower, the check
+        # below for broken collect2 doesn't work under 4.3+
+          collect2name=`${CC} -print-prog-name=collect2`
+          if test -f "$collect2name" && \
+           strings "$collect2name" | grep resolve_lib_name >/dev/null
+          then
+          # We have reworked collect2
+          _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+          else
+          # We have old collect2
+          _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
+          # It fails to find uninstalled libraries when the uninstalled
+          # path is not listed in the libpath.  Setting hardcode_minus_L
+          # to unsupported forces relinking
+          _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+          _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+          _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+          fi
+        esac
+        shared_flag='-shared'
+      else
+        # not using gcc
+        if test "$host_cpu" = ia64; then
+        # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+        # chokes on -Wl,-G. The following line is correct:
+          shared_flag='-G'
+        else
+        if test "$aix_use_runtimelinking" = yes; then
+            shared_flag='${wl}-G'
+          else
+            shared_flag='${wl}-bM:SRE'
+        fi
+        fi
+      fi
+
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+      if test "$aix_use_runtimelinking" = yes; then
+        # Warning - without using the other runtime loading flags (-brtl),
+        # -berok will link without error, but may produce a broken library.
+        _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
+       # Determine the default libpath from the value encoded in an empty executable.
+       _LT_AC_SYS_LIBPATH_AIX
+       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+        _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+       else
+        if test "$host_cpu" = ia64; then
+          _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+          _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+          _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+        else
+         # Determine the default libpath from the value encoded in an empty executable.
+         _LT_AC_SYS_LIBPATH_AIX
+         _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+          # Warning - without using the other run time loading flags,
+          # -berok will link without error, but may produce a broken library.
+          _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+          _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+          # -bexpall does not export symbols beginning with underscore (_)
+          _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+          # Exported symbols can be pulled into shared objects from archives
+          _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
+          _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+          # This is similar to how AIX traditionally builds it's shared libraries.
+          _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+        fi
+      fi
+      ;;
+
+    amigaos*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      # see comment about different semantics on the GNU ld section
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      ;;
+
+    bsdi4*)
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+      # Tell ltmain to make .lib files, not .a files.
+      libext=lib
+      # Tell ltmain to make .dll files, not .so files.
+      shrext_cmds=".dll"
+      # FIXME: Setting linknames here is a bad hack.
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
+      # The linker will automatically build a .lib file if we build a DLL.
+      _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
+      # FIXME: Should let the user specify the lib program.
+      _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs'
+      fix_srcfile_path='`cygpath -w "$srcfile"`'
+      _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+      ;;
+
+    darwin* | rhapsody*)
+    if test "$GXX" = yes ; then
+      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+      case "$host_os" in
+      rhapsody* | darwin1.[[012]])
+        _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
+        ;;
+      *) # Darwin 1.3 on
+      if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+        _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
+      else
+        case ${MACOSX_DEPLOYMENT_TARGET} in
+          10.[[012]])
+            _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
+            ;;
+          10.*)
+            _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup'
+            ;;
+        esac
+      fi
+        ;;
+      esac
+        lt_int_apple_cc_single_mod=no
+        output_verbose_link_cmd='echo'
+        if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
+          lt_int_apple_cc_single_mod=yes
+        fi
+        if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+        else
+        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+      fi
+      _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
+        if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+          _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+        else
+          _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+        fi
+          _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=no
+      _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+    else
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    fi
+      ;;
+
+    dgux*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    freebsd1*)
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | kfreebsd*-gnu)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+        _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+        _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      ;;
+
+    hpux10* | hpux11*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+        case "$host_cpu" in
+        hppa*64*|ia64*)
+          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+          ;;
+        *)
+          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+          ;;
+        esac
+      else
+        case "$host_cpu" in
+        hppa*64*|ia64*)
+          _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
+          ;;
+        *)
+          _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+          ;;
+        esac
+      fi
+      if test "$with_gnu_ld" = no; then
+        case "$host_cpu" in
+        hppa*64*)
+          _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+          _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
+          _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+          _LT_AC_TAGVAR(hardcode_direct, $1)=no
+          _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+          ;;
+        ia64*)
+          _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+          _LT_AC_TAGVAR(hardcode_direct, $1)=no
+          _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+
+          # hardcode_minus_L: Not really in the search PATH,
+          # but as the default location of the library.
+          _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+          ;;
+        *)
+          _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+          _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+          _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+          _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+
+          # hardcode_minus_L: Not really in the search PATH,
+          # but as the default location of the library.
+          _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+          ;;
+        esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+        _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+        _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+      ;;
+
+    netbsd* | knetbsd*-gnu)
+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+        _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+        _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    newsos6)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    openbsd*)
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+        _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      else
+       case $host_os in
+         openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
+           _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+           _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+           ;;
+         *)
+           _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+           _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+           ;;
+       esac
+      fi
+      ;;
+
+    os2*)
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+        _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+        _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+        _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+      ;;
+
+    osf4* | osf5*)      # as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+        _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      else
+        _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+        _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+        _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
+        $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
+
+        # Both c and cxx compiler support -rpath directly
+        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+      ;;
+
+    sco3.2v5*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+      runpath_var=LD_RUN_PATH
+      hardcode_runpath_var=yes
+      ;;
+
+    solaris*)
+      _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
+      if test "$GCC" = yes; then
+        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+        _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+          $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
+      else
+        _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+        _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+        $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      case $host_os in
+      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+      *) # Supported since Solaris 2.6 (maybe 2.5.1?)
+        _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;;
+      esac
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+        # Use $CC to link under sequent, because it throws in some extra .o
+        # files that make .init and .fini sections work.
+        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+        _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+        sni)
+          _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+          _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
+        ;;
+        siemens)
+          ## LD is ld it makes a PLAMLIB
+          ## CC just makes a GrossModule.
+          _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+          _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
+          _LT_AC_TAGVAR(hardcode_direct, $1)=no
+        ;;
+        motorola)
+          _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+          _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
+        ;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    sysv4.3*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+        _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+        _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+        runpath_var=LD_RUN_PATH
+        hardcode_runpath_var=yes
+        _LT_AC_TAGVAR(ld_shlibs, $1)=yes
+      fi
+      ;;
+
+    sysv4.2uw2*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      hardcode_runpath_var=yes
+      runpath_var=LD_RUN_PATH
+      ;;
+
+   sysv5OpenUNIX8* | sysv5UnixWare7* |  sysv5uw[[78]]* | unixware7*)
+      _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text'
+      if test "$GCC" = yes; then
+        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      runpath_var='LD_RUN_PATH'
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    sysv5*)
+      _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
+      # $CC -shared without GNU ld will not create a library from C++
+      # object files and a static libstdc++, better avoid it by now
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+                $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      runpath_var='LD_RUN_PATH'
+      ;;
+
+    uts4*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    *)
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      ;;
+    esac
+  fi
+])
+AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
+test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in
+x|xyes)
+  # Assume -lc should be added
+  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $_LT_AC_TAGVAR(archive_cmds, $1) in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      AC_MSG_CHECKING([whether -lc should be explicitly linked in])
+      $rm conftest*
+      printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+      if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+        soname=conftest
+        lib=conftest
+        libobjs=conftest.$ac_objext
+        deplibs=
+        wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
+        compiler_flags=-v
+        linker_flags=-v
+        verstring=
+        output_objdir=.
+        libname=conftest
+        lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
+        _LT_AC_TAGVAR(allow_undefined_flag, $1)=
+        if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
+        then
+          _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+        else
+          _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+        fi
+        _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+      else
+        cat conftest.err 1>&5
+      fi
+      $rm conftest*
+      AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
+      ;;
+    esac
+  fi
+  ;;
+esac
+])# AC_LIBTOOL_PROG_LD_SHLIBS
+
+
+# _LT_AC_FILE_LTDLL_C
+# -------------------
+# Be careful that the start marker always follows a newline.
+AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
+# /* ltdll.c starts here */
+# #define WIN32_LEAN_AND_MEAN
+# #include <windows.h>
+# #undef WIN32_LEAN_AND_MEAN
+# #include <stdio.h>
+#
+# #ifndef __CYGWIN__
+# #  ifdef __CYGWIN32__
+# #    define __CYGWIN__ __CYGWIN32__
+# #  endif
+# #endif
+#
+# #ifdef __cplusplus
+# extern "C" {
+# #endif
+# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
+# #ifdef __cplusplus
+# }
+# #endif
+#
+# #ifdef __CYGWIN__
+# #include <cygwin/cygwin_dll.h>
+# DECLARE_CYGWIN_DLL( DllMain );
+# #endif
+# HINSTANCE __hDllInstance_base;
+#
+# BOOL APIENTRY
+# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
+# {
+#   __hDllInstance_base = hInst;
+#   return TRUE;
+# }
+# /* ltdll.c ends here */
+])# _LT_AC_FILE_LTDLL_C
+
+
+# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
+# ---------------------------------
+AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
+
+
+# old names
+AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
+AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])
+AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])
+AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
+AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
+AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])
+AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])
+
+# This is just to silence aclocal about the macro not being used
+ifelse([AC_DISABLE_FAST_INSTALL])
+
+AC_DEFUN([LT_AC_PROG_GCJ],
+[AC_CHECK_TOOL(GCJ, gcj, no)
+  test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+  AC_SUBST(GCJFLAGS)
+])
+
+AC_DEFUN([LT_AC_PROG_RC],
+[AC_CHECK_TOOL(RC, windres, no)
+])
+
+############################################################
+# NOTE: This macro has been submitted for inclusion into   #
+#  GNU Autoconf as AC_PROG_SED.  When it is available in   #
+#  a released version of Autoconf we should remove this    #
+#  macro and use it instead.                               #
+############################################################
+# LT_AC_PROG_SED
+# --------------
+# Check for a fully-functional sed program, that truncates
+# as few characters as possible.  Prefer GNU sed if found.
+AC_DEFUN([LT_AC_PROG_SED],
+[AC_MSG_CHECKING([for a sed that does not truncate output])
+AC_CACHE_VAL(lt_cv_path_SED,
+[# Loop through the user's path and test for sed and gsed.
+# Then use that list of sed's as ones to test for truncation.
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for lt_ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
+        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
+      fi
+    done
+  done
+done
+lt_ac_max=0
+lt_ac_count=0
+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
+# along with /bin/sed that truncates output.
+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
+  test ! -f $lt_ac_sed && break
+  cat /dev/null > conftest.in
+  lt_ac_count=0
+  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
+  # Check for GNU sed and select it if it is found.
+  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
+    lt_cv_path_SED=$lt_ac_sed
+    break
+  fi
+  while true; do
+    cat conftest.in conftest.in >conftest.tmp
+    mv conftest.tmp conftest.in
+    cp conftest.in conftest.nl
+    echo >>conftest.nl
+    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
+    cmp -s conftest.out conftest.nl || break
+    # 10000 chars as input seems more than enough
+    test $lt_ac_count -gt 10 && break
+    lt_ac_count=`expr $lt_ac_count + 1`
+    if test $lt_ac_count -gt $lt_ac_max; then
+      lt_ac_max=$lt_ac_count
+      lt_cv_path_SED=$lt_ac_sed
+    fi
+  done
+done
+SED=$lt_cv_path_SED
+])
+AC_MSG_RESULT([$SED])
+])