71 files changed, 15083 insertions, 0 deletions

diff --git a/urunlevel/archival/gzip.c b/urunlevel/archival/gzip.c
new file mode 100644
index 0000000..1092480
--- /dev/null
+++ b/urunlevel/archival/gzip.c
@@ -0,0 +1,2558 @@
+/* vi: set sw=4 ts=4: */
+/*
+ * Gzip implementation for busybox
+ *
+ * Based on GNU gzip Copyright (C) 1992-1993 Jean-loup Gailly.
+ *
+ * Originally adjusted for busybox by Charles P. Wright <cpw@unix.asb.com>
+ *              "this is a stripped down version of gzip I put into busybox, it does
+ *              only standard in to standard out with -9 compression.  It also requires
+ *              the zcat module for some important functions."
+ *
+ * Adjusted further by Erik Andersen <andersen@codepoet.org> to support
+ * files as well as stdin/stdout, and to generally behave itself wrt
+ * command line handling.
+ *
+ * Adjusted further by David Seikel <won_fang@yahoo.cam.au> to support
+ * just storing the file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+/* These defines are very important for BusyBox.  Without these,
+ * huge chunks of ram are pre-allocated making the BusyBox bss
+ * size Freaking Huge(tm), which is a bad thing.*/
+#define SMALL_MEM
+#define DYN_ALLOC
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <unistd.h>
+#include <errno.h>
+#include <sys/types.h>
+#include <signal.h>
+#include <utime.h>
+#include <ctype.h>
+#include <sys/types.h>
+#include <unistd.h>
+#include <dirent.h>
+#include <fcntl.h>
+#include <time.h>
+#include "busybox.h"
+
+#define memzero(s, n)     memset ((void *)(s), 0, (n))
+
+#ifndef RETSIGTYPE
+#  define RETSIGTYPE void
+#endif
+
+typedef unsigned char uch;
+typedef unsigned short ush;
+typedef unsigned long ulg;
+
+/* Return codes from gzip */
+#define OK      0
+#define ERROR   1
+#define WARNING 2
+
+/* Compression methods (see algorithm.doc) */
+/* Only STORED and DEFLATED are supported by this BusyBox module */
+#define STORED      0
+/* methods 4 to 7 reserved */
+#define DEFLATED    8
+
+int just_store = 0;
+
+/* To save memory for 16 bit systems, some arrays are overlaid between
+ * the various modules:
+ * deflate:  prev+head   window      d_buf  l_buf  outbuf
+ * unlzw:    tab_prefix  tab_suffix  stack  inbuf  outbuf
+ * For compression, input is done in window[]. For decompression, output
+ * is done in window except for unlzw.
+ */
+
+#ifndef INBUFSIZ
+#  ifdef SMALL_MEM
+#    define INBUFSIZ  0x2000    /* input buffer size */
+#  else
+#    define INBUFSIZ  0x8000    /* input buffer size */
+#  endif
+#endif
+#define INBUF_EXTRA  64 /* required by unlzw() */
+
+#ifndef OUTBUFSIZ
+#  ifdef SMALL_MEM
+#    define OUTBUFSIZ   8192    /* output buffer size */
+#  else
+#    define OUTBUFSIZ  16384    /* output buffer size */
+#  endif
+#endif
+#define OUTBUF_EXTRA 2048       /* required by unlzw() */
+
+#ifndef DIST_BUFSIZE
+#  ifdef SMALL_MEM
+#    define DIST_BUFSIZE 0x2000 /* buffer for distances, see trees.c */
+#  else
+#    define DIST_BUFSIZE 0x8000 /* buffer for distances, see trees.c */
+#  endif
+#endif
+
+#ifdef DYN_ALLOC
+#  define DECLARE(type, array, size)  static type * array
+#  define ALLOC(type, array, size) { \
+      array = (type*)xcalloc((size_t)(((size)+1L)/2), 2*sizeof(type)); \
+   }
+#  define FREE(array) {free(array), array=NULL;}
+#else
+#  define DECLARE(type, array, size)  static type array[size]
+#  define ALLOC(type, array, size)
+#  define FREE(array)
+#endif
+
+#define tab_suffix window
+#define tab_prefix prev /* hash link (see deflate.c) */
+#define head (prev+WSIZE)       /* hash head (see deflate.c) */
+
+static long bytes_in;   /* number of input bytes */
+
+#define isize bytes_in
+/* for compatibility with old zip sources (to be cleaned) */
+
+typedef int file_t;             /* Do not use stdio */
+
+#define NO_FILE  (-1)   /* in memory compression */
+
+
+#define PACK_MAGIC     "\037\036"       /* Magic header for packed files */
+#define GZIP_MAGIC     "\037\213"       /* Magic header for gzip files, 1F 8B */
+#define OLD_GZIP_MAGIC "\037\236"       /* Magic header for gzip 0.5 = freeze 1.x */
+#define LZH_MAGIC      "\037\240"       /* Magic header for SCO LZH Compress files */
+#define PKZIP_MAGIC    "\120\113\003\004"       /* Magic header for pkzip files */
+
+/* gzip flag byte */
+#define ASCII_FLAG   0x01       /* bit 0 set: file probably ascii text */
+#define CONTINUATION 0x02       /* bit 1 set: continuation of multi-part gzip file */
+#define EXTRA_FIELD  0x04       /* bit 2 set: extra field present */
+#define ORIG_NAME    0x08       /* bit 3 set: original file name present */
+#define COMMENT      0x10       /* bit 4 set: file comment present */
+#define RESERVED     0xC0       /* bit 6,7:   reserved */
+
+/* internal file attribute */
+#define UNKNOWN 0xffff
+#define BINARY  0
+#define ASCII   1
+
+#ifndef WSIZE
+#  define WSIZE 0x8000  /* window size--must be a power of two, and */
+#endif                                                  /*  at least 32K for zip's deflate method */
+
+#define MIN_MATCH  3
+#define MAX_MATCH  258
+/* The minimum and maximum match lengths */
+
+#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
+/* Minimum amount of lookahead, except at the end of the input file.
+ * See deflate.c for comments about the MIN_MATCH+1.
+ */
+
+#define MAX_DIST  (WSIZE-MIN_LOOKAHEAD)
+/* In order to simplify the code, particularly on 16 bit machines, match
+ * distances are limited to MAX_DIST instead of WSIZE.
+ */
+
+/* put_byte is used for the compressed output */
+#define put_byte(c) {outbuf[outcnt++]=(uch)(c); if (outcnt==OUTBUFSIZ)\
+   flush_outbuf();}
+
+
+/* Output a 32 bit value to the bit stream, lsb first */
+#if 0
+#define put_long(n) { \
+    put_short((n) & 0xffff); \
+    put_short(((ulg)(n)) >> 16); \
+}
+#endif
+
+#define seekable()    0 /* force sequential output */
+#define translate_eol 0 /* no option -a yet */
+
+/* Diagnostic functions */
+#ifdef DEBUG
+#  define Assert(cond,msg) {if(!(cond)) bb_error_msg(msg);}
+#  define Trace(x) fprintf x
+#  define Tracev(x) {if (verbose) fprintf x ;}
+#  define Tracevv(x) {if (verbose>1) fprintf x ;}
+#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
+#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
+#else
+#  define Assert(cond,msg)
+#  define Trace(x)
+#  define Tracev(x)
+#  define Tracevv(x)
+#  define Tracec(c,x)
+#  define Tracecv(c,x)
+#endif
+
+#define WARN(msg) {if (!quiet) fprintf msg ; \
+                   if (exit_code == OK) exit_code = WARNING;}
+
+#ifndef MAX_PATH_LEN
+#  define MAX_PATH_LEN   1024   /* max pathname length */
+#endif
+
+
+        /* from zip.c: */
+static int zip(int in, int out);
+static int file_read(char *buf, unsigned size);
+
+        /* from gzip.c */
+static RETSIGTYPE abort_gzip(void);
+
+                /* from deflate.c */
+static void lm_init(ush * flags);
+static ulg deflate(void);
+
+                /* from trees.c */
+static void ct_init(ush * attr, int *methodp);
+static int ct_tally(int dist, int lc);
+static ulg flush_block(char *buf, ulg stored_len, int eof);
+
+                /* from bits.c */
+static void bi_init(file_t zipfile);
+static void send_bits(int value, int length);
+static unsigned bi_reverse(unsigned value, int length);
+static void bi_windup(void);
+static void copy_block(char *buf, unsigned len, int header);
+static int (*read_buf) (char *buf, unsigned size);
+
+        /* from util.c: */
+static void flush_outbuf(void);
+
+/* lzw.h -- define the lzw functions.
+ * Copyright (C) 1992-1993 Jean-loup Gailly.
+ * This is free software; you can redistribute it and/or modify it under the
+ * terms of the GNU General Public License, see the file COPYING.
+ */
+
+#if !defined(OF) && defined(lint)
+#  include "gzip.h"
+#endif
+
+#ifndef BITS
+#  define BITS 16
+#endif
+#define INIT_BITS 9             /* Initial number of bits per code */
+
+#define BIT_MASK    0x1f        /* Mask for 'number of compression bits' */
+/* Mask 0x20 is reserved to mean a fourth header byte, and 0x40 is free.
+ * It's a pity that old uncompress does not check bit 0x20. That makes
+ * extension of the format actually undesirable because old compress
+ * would just crash on the new format instead of giving a meaningful
+ * error message. It does check the number of bits, but it's more
+ * helpful to say "unsupported format, get a new version" than
+ * "can only handle 16 bits".
+ */
+
+/* tailor.h -- target dependent definitions
+ * Copyright (C) 1992-1993 Jean-loup Gailly.
+ * This is free software; you can redistribute it and/or modify it under the
+ * terms of the GNU General Public License, see the file COPYING.
+ */
+
+/* The target dependent definitions should be defined here only.
+ * The target dependent functions should be defined in tailor.c.
+ */
+
+
+        /* Common defaults */
+
+#ifndef OS_CODE
+#  define OS_CODE  0x03 /* assume Unix */
+#endif
+
+#ifndef PATH_SEP
+#  define PATH_SEP '/'
+#endif
+
+#ifndef OPTIONS_VAR
+#  define OPTIONS_VAR "GZIP"
+#endif
+
+#ifndef Z_SUFFIX
+#  define Z_SUFFIX ".gz"
+#endif
+
+#ifdef MAX_EXT_CHARS
+#  define MAX_SUFFIX  MAX_EXT_CHARS
+#else
+#  define MAX_SUFFIX  30
+#endif
+
+                /* global buffers */
+
+DECLARE(uch, inbuf, INBUFSIZ + INBUF_EXTRA);
+DECLARE(uch, outbuf, OUTBUFSIZ + OUTBUF_EXTRA);
+DECLARE(ush, d_buf, DIST_BUFSIZE);
+DECLARE(uch, window, 2L * WSIZE);
+DECLARE(ush, tab_prefix, 1L << BITS);
+
+static int foreground;  /* set if program run in foreground */
+static int method = DEFLATED;   /* compression method */
+static int exit_code = OK;      /* program exit code */
+static int part_nb;             /* number of parts in .gz file */
+static long time_stamp; /* original time stamp (modification time) */
+static long ifile_size; /* input file size, -1 for devices (debug only) */
+static char z_suffix[MAX_SUFFIX + 1];   /* default suffix (can be set with --suffix) */
+static int z_len;               /* strlen(z_suffix) */
+
+static int ifd;                 /* input file descriptor */
+static int ofd;                 /* output file descriptor */
+static unsigned insize; /* valid bytes in inbuf */
+static unsigned outcnt; /* bytes in output buffer */
+
+
+/* Output a 16 bit value, lsb first */
+static void put_short(ush w)
+{
+        if (outcnt < OUTBUFSIZ - 2) {
+                outbuf[outcnt++] = (uch) ((w) & 0xff);
+                outbuf[outcnt++] = (uch) ((ush) (w) >> 8);
+        } else {
+                put_byte((uch) ((w) & 0xff));
+                put_byte((uch) ((ush) (w) >> 8));
+        }
+}
+
+/* ========================================================================
+ * Signal and error handler.
+ */
+static void abort_gzip()
+{
+        exit(ERROR);
+}
+
+/* ===========================================================================
+ * Clear input and output buffers
+ */
+static void clear_bufs(void)
+{
+        outcnt = 0;
+        insize = 0;
+        bytes_in = 0L;
+}
+
+static void write_bb_error_msg(void)
+{
+        fputc('\n', stderr);
+        bb_perror_nomsg();
+        abort_gzip();
+}
+
+/* ===========================================================================
+ * Does the same as write(), but also handles partial pipe writes and checks
+ * for error return.
+ */
+static void write_buf(int fd, void *buf, unsigned cnt)
+{
+        unsigned n;
+
+        while ((n = write(fd, buf, cnt)) != cnt) {
+                if (n == (unsigned) (-1)) {
+                        write_bb_error_msg();
+                }
+                cnt -= n;
+                buf = (void *) ((char *) buf + n);
+        }
+}
+
+/* ===========================================================================
+ * Run a set of bytes through the crc shift register.  If s is a NULL
+ * pointer, then initialize the crc shift register contents instead.
+ * Return the current crc in either case.
+ */
+static ulg updcrc(uch * s, unsigned n)
+{
+        static ulg crc = (ulg) 0xffffffffL;     /* shift register contents */
+        register ulg c;         /* temporary variable */
+        static unsigned long crc_32_tab[256];
+
+        if (crc_32_tab[1] == 0x00000000L) {
+                unsigned long csr;      /* crc shift register */
+                const unsigned long e = 0xedb88320L;    /* polynomial exclusive-or pattern */
+                int i;                  /* counter for all possible eight bit values */
+                int k;                  /* byte being shifted into crc apparatus */
+
+                /* Compute table of CRC's. */
+                for (i = 1; i < 256; i++) {
+                        csr = i;
+                        /* The idea to initialize the register with the byte instead of
+                           * zero was stolen from Haruhiko Okumura's ar002
+                         */
+                        for (k = 8; k; k--)
+                                csr = csr & 1 ? (csr >> 1) ^ e : csr >> 1;
+                        crc_32_tab[i] = csr;
+                }
+        }
+
+        if (s == NULL) {
+                c = 0xffffffffL;
+        } else {
+                c = crc;
+                if (n)
+                        do {
+                                c = crc_32_tab[((int) c ^ (*s++)) & 0xff] ^ (c >> 8);
+                        } while (--n);
+        }
+        crc = c;
+        return c ^ 0xffffffffL; /* (instead of ~c for 64-bit machines) */
+}
+
+/* bits.c -- output variable-length bit strings
+ * Copyright (C) 1992-1993 Jean-loup Gailly
+ * This is free software; you can redistribute it and/or modify it under the
+ * terms of the GNU General Public License, see the file COPYING.
+ */
+
+
+/*
+ *  PURPOSE
+ *
+ *      Output variable-length bit strings. Compression can be done
+ *      to a file or to memory. (The latter is not supported in this version.)
+ *
+ *  DISCUSSION
+ *
+ *      The PKZIP "deflate" file format interprets compressed file data
+ *      as a sequence of bits.  Multi-bit strings in the file may cross
+ *      byte boundaries without restriction.
+ *
+ *      The first bit of each byte is the low-order bit.
+ *
+ *      The routines in this file allow a variable-length bit value to
+ *      be output right-to-left (useful for literal values). For
+ *      left-to-right output (useful for code strings from the tree routines),
+ *      the bits must have been reversed first with bi_reverse().
+ *
+ *      For in-memory compression, the compressed bit stream goes directly
+ *      into the requested output buffer. The input data is read in blocks
+ *      by the mem_read() function. The buffer is limited to 64K on 16 bit
+ *      machines.
+ *
+ *  INTERFACE
+ *
+ *      void bi_init (FILE *zipfile)
+ *          Initialize the bit string routines.
+ *
+ *      void send_bits (int value, int length)
+ *          Write out a bit string, taking the source bits right to
+ *          left.
+ *
+ *      int bi_reverse (int value, int length)
+ *          Reverse the bits of a bit string, taking the source bits left to
+ *          right and emitting them right to left.
+ *
+ *      void bi_windup (void)
+ *          Write out any remaining bits in an incomplete byte.
+ *
+ *      void copy_block(char *buf, unsigned len, int header)
+ *          Copy a stored block to the zip file, storing first the length and
+ *          its one's complement if requested.
+ *
+ */
+
+/* ===========================================================================
+ * Local data used by the "bit string" routines.
+ */
+
+static file_t zfile;    /* output gzip file */
+
+static unsigned short bi_buf;
+
+/* Output buffer. bits are inserted starting at the bottom (least significant
+ * bits).
+ */
+
+#define Buf_size (8 * 2*sizeof(char))
+/* Number of bits used within bi_buf. (bi_buf might be implemented on
+ * more than 16 bits on some systems.)
+ */
+
+static int bi_valid;
+
+/* Current input function. Set to mem_read for in-memory compression */
+
+#ifdef DEBUG
+ulg bits_sent;                  /* bit length of the compressed data */
+#endif
+
+/* ===========================================================================
+ * Initialize the bit string routines.
+ */
+static void bi_init(file_t zipfile)
+{
+        zfile = zipfile;
+        bi_buf = 0;
+        bi_valid = 0;
+#ifdef DEBUG
+        bits_sent = 0L;
+#endif
+
+        /* Set the defaults for file compression. They are set by memcompress
+         * for in-memory compression.
+         */
+        if (zfile != NO_FILE) {
+                read_buf = file_read;
+        }
+}
+
+/* ===========================================================================
+ * Send a value on a given number of bits.
+ * IN assertion: length <= 16 and value fits in length bits.
+ */
+static void send_bits(int value, int length)
+{
+#ifdef DEBUG
+        Tracev((stderr, " l %2d v %4x ", length, value));
+        Assert(length > 0 && length <= 15, "invalid length");
+        bits_sent += (ulg) length;
+#endif
+        /* If not enough room in bi_buf, use (valid) bits from bi_buf and
+         * (16 - bi_valid) bits from value, leaving (width - (16-bi_valid))
+         * unused bits in value.
+         */
+        if (bi_valid > (int) Buf_size - length) {
+                bi_buf |= (value << bi_valid);
+                put_short(bi_buf);
+                bi_buf = (ush) value >> (Buf_size - bi_valid);
+                bi_valid += length - Buf_size;
+        } else {
+                bi_buf |= value << bi_valid;
+                bi_valid += length;
+        }
+}
+
+/* ===========================================================================
+ * Reverse the first len bits of a code, using straightforward code (a faster
+ * method would use a table)
+ * IN assertion: 1 <= len <= 15
+ */
+static unsigned bi_reverse(unsigned code, int len)
+{
+        register unsigned res = 0;
+
+        do {
+                res |= code & 1;
+                code >>= 1, res <<= 1;
+        } while (--len > 0);
+        return res >> 1;
+}
+
+/* ===========================================================================
+ * Write out any remaining bits in an incomplete byte.
+ */
+static void bi_windup()
+{
+        if (bi_valid > 8) {
+                put_short(bi_buf);
+        } else if (bi_valid > 0) {
+                put_byte(bi_buf);
+        }
+        bi_buf = 0;
+        bi_valid = 0;
+#ifdef DEBUG
+        bits_sent = (bits_sent + 7) & ~7;
+#endif
+}
+
+/* ===========================================================================
+ * Copy a stored block to the zip file, storing first the length and its
+ * one's complement if requested.
+ */
+static void copy_block(char *buf, unsigned len, int header)
+{
+        bi_windup();            /* align on byte boundary */
+
+        if (header) {
+                put_short((ush) len);
+                put_short((ush) ~ len);
+#ifdef DEBUG
+                bits_sent += 2 * 16;
+#endif
+        }
+#ifdef DEBUG
+        bits_sent += (ulg) len << 3;
+#endif
+        while (len--) {
+                put_byte(*buf++);
+        }
+}
+
+/* deflate.c -- compress data using the deflation algorithm
+ * Copyright (C) 1992-1993 Jean-loup Gailly
+ * This is free software; you can redistribute it and/or modify it under the
+ * terms of the GNU General Public License, see the file COPYING.
+ */
+
+/*
+ *  PURPOSE
+ *
+ *      Identify new text as repetitions of old text within a fixed-
+ *      length sliding window trailing behind the new text.
+ *
+ *  DISCUSSION
+ *
+ *      The "deflation" process depends on being able to identify portions
+ *      of the input text which are identical to earlier input (within a
+ *      sliding window trailing behind the input currently being processed).
+ *
+ *      The most straightforward technique turns out to be the fastest for
+ *      most input files: try all possible matches and select the longest.
+ *      The key feature of this algorithm is that insertions into the string
+ *      dictionary are very simple and thus fast, and deletions are avoided
+ *      completely. Insertions are performed at each input character, whereas
+ *      string matches are performed only when the previous match ends. So it
+ *      is preferable to spend more time in matches to allow very fast string
+ *      insertions and avoid deletions. The matching algorithm for small
+ *      strings is inspired from that of Rabin & Karp. A brute force approach
+ *      is used to find longer strings when a small match has been found.
+ *      A similar algorithm is used in comic (by Jan-Mark Wams) and freeze
+ *      (by Leonid Broukhis).
+ *         A previous version of this file used a more sophisticated algorithm
+ *      (by Fiala and Greene) which is guaranteed to run in linear amortized
+ *      time, but has a larger average cost, uses more memory and is patented.
+ *      However the F&G algorithm may be faster for some highly redundant
+ *      files if the parameter max_chain_length (described below) is too large.
+ *
+ *  ACKNOWLEDGMENTS
+ *
+ *      The idea of lazy evaluation of matches is due to Jan-Mark Wams, and
+ *      I found it in 'freeze' written by Leonid Broukhis.
+ *      Thanks to many info-zippers for bug reports and testing.
+ *
+ *  REFERENCES
+ *
+ *      APPNOTE.TXT documentation file in PKZIP 1.93a distribution.
+ *
+ *      A description of the Rabin and Karp algorithm is given in the book
+ *         "Algorithms" by R. Sedgewick, Addison-Wesley, p252.
+ *
+ *      Fiala,E.R., and Greene,D.H.
+ *         Data Compression with Finite Windows, Comm.ACM, 32,4 (1989) 490-595
+ *
+ *  INTERFACE
+ *
+ *      void lm_init (int pack_level, ush *flags)
+ *          Initialize the "longest match" routines for a new file
+ *
+ *      ulg deflate (void)
+ *          Processes a new input file and return its compressed length. Sets
+ *          the compressed length, crc, deflate flags and internal file
+ *          attributes.
+ */
+
+
+/* ===========================================================================
+ * Configuration parameters
+ */
+
+/* Compile with MEDIUM_MEM to reduce the memory requirements or
+ * with SMALL_MEM to use as little memory as possible. Use BIG_MEM if the
+ * entire input file can be held in memory (not possible on 16 bit systems).
+ * Warning: defining these symbols affects HASH_BITS (see below) and thus
+ * affects the compression ratio. The compressed output
+ * is still correct, and might even be smaller in some cases.
+ */
+
+#ifdef SMALL_MEM
+#   define HASH_BITS  13        /* Number of bits used to hash strings */
+#endif
+#ifdef MEDIUM_MEM
+#   define HASH_BITS  14
+#endif
+#ifndef HASH_BITS
+#   define HASH_BITS  15
+   /* For portability to 16 bit machines, do not use values above 15. */
+#endif
+
+/* To save space (see unlzw.c), we overlay prev+head with tab_prefix and
+ * window with tab_suffix. Check that we can do this:
+ */
+#if (WSIZE<<1) > (1<<BITS)
+#  error cannot overlay window with tab_suffix and prev with tab_prefix0
+#endif
+#if HASH_BITS > BITS-1
+#  error cannot overlay head with tab_prefix1
+#endif
+#define HASH_SIZE (unsigned)(1<<HASH_BITS)
+#define HASH_MASK (HASH_SIZE-1)
+#define WMASK     (WSIZE-1)
+/* HASH_SIZE and WSIZE must be powers of two */
+#define NIL 0
+/* Tail of hash chains */
+#define FAST 4
+#define SLOW 2
+/* speed options for the general purpose bit flag */
+#ifndef TOO_FAR
+#  define TOO_FAR 4096
+#endif
+/* Matches of length 3 are discarded if their distance exceeds TOO_FAR */
+/* ===========================================================================
+ * Local data used by the "longest match" routines.
+ */
+typedef ush Pos;
+typedef unsigned IPos;
+
+/* A Pos is an index in the character window. We use short instead of int to
+ * save space in the various tables. IPos is used only for parameter passing.
+ */
+
+/* DECLARE(uch, window, 2L*WSIZE); */
+/* Sliding window. Input bytes are read into the second half of the window,
+ * and move to the first half later to keep a dictionary of at least WSIZE
+ * bytes. With this organization, matches are limited to a distance of
+ * WSIZE-MAX_MATCH bytes, but this ensures that IO is always
+ * performed with a length multiple of the block size. Also, it limits
+ * the window size to 64K, which is quite useful on MSDOS.
+ * To do: limit the window size to WSIZE+BSZ if SMALL_MEM (the code would
+ * be less efficient).
+ */
+
+/* DECLARE(Pos, prev, WSIZE); */
+/* Link to older string with same hash index. To limit the size of this
+ * array to 64K, this link is maintained only for the last 32K strings.
+ * An index in this array is thus a window index modulo 32K.
+ */
+
+/* DECLARE(Pos, head, 1<<HASH_BITS); */
+/* Heads of the hash chains or NIL. */
+
+static const ulg window_size = (ulg) 2 * WSIZE;
+
+/* window size, 2*WSIZE except for MMAP or BIG_MEM, where it is the
+ * input file length plus MIN_LOOKAHEAD.
+ */
+
+static long block_start;
+
+/* window position at the beginning of the current output block. Gets
+ * negative when the window is moved backwards.
+ */
+
+static unsigned ins_h;  /* hash index of string to be inserted */
+
+#define H_SHIFT  ((HASH_BITS+MIN_MATCH-1)/MIN_MATCH)
+/* Number of bits by which ins_h and del_h must be shifted at each
+ * input step. It must be such that after MIN_MATCH steps, the oldest
+ * byte no longer takes part in the hash key, that is:
+ *   H_SHIFT * MIN_MATCH >= HASH_BITS
+ */
+
+static unsigned int prev_length;
+
+/* Length of the best match at previous step. Matches not greater than this
+ * are discarded. This is used in the lazy match evaluation.
+ */
+
+static unsigned strstart;       /* start of string to insert */
+static unsigned match_start;    /* start of matching string */
+static int eofile;              /* flag set at end of input file */
+static unsigned lookahead;      /* number of valid bytes ahead in window */
+
+static const unsigned max_chain_length = 4096;
+
+/* To speed up deflation, hash chains are never searched beyond this length.
+ * A higher limit improves compression ratio but degrades the speed.
+ */
+
+static const unsigned int max_lazy_match = 258;
+
+/* Attempt to find a better match only when the current match is strictly
+ * smaller than this value. This mechanism is used only for compression
+ * levels >= 4.
+ */
+#define max_insert_length  max_lazy_match
+/* Insert new strings in the hash table only if the match length
+ * is not greater than this length. This saves time but degrades compression.
+ * max_insert_length is used only for compression levels <= 3.
+ */
+
+static const unsigned good_match = 32;
+
+/* Use a faster search when the previous match is longer than this */
+
+
+/* Values for max_lazy_match, good_match and max_chain_length, depending on
+ * the desired pack level (0..9). The values given below have been tuned to
+ * exclude worst case performance for pathological files. Better values may be
+ * found for specific files.
+ */
+
+static const int nice_match = 258;      /* Stop searching when current match exceeds this */
+
+/* Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4
+ * For deflate_fast() (levels <= 3) good is ignored and lazy has a different
+ * meaning.
+ */
+
+#define EQUAL 0
+/* result of memcmp for equal strings */
+
+/* ===========================================================================
+ *  Prototypes for local functions.
+ */
+static void fill_window(void);
+
+static int longest_match(IPos cur_match);
+
+#ifdef DEBUG
+static void check_match(IPos start, IPos match, int length);
+#endif
+
+/* ===========================================================================
+ * Update a hash value with the given input byte
+ * IN  assertion: all calls to to UPDATE_HASH are made with consecutive
+ *    input characters, so that a running hash key can be computed from the
+ *    previous key instead of complete recalculation each time.
+ */
+#define UPDATE_HASH(h,c) (h = (((h)<<H_SHIFT) ^ (c)) & HASH_MASK)
+
+/* ===========================================================================
+ * Insert string s in the dictionary and set match_head to the previous head
+ * of the hash chain (the most recent string with same hash key). Return
+ * the previous length of the hash chain.
+ * IN  assertion: all calls to to INSERT_STRING are made with consecutive
+ *    input characters and the first MIN_MATCH bytes of s are valid
+ *    (except for the last MIN_MATCH-1 bytes of the input file).
+ */
+#define INSERT_STRING(s, match_head) \
+   (UPDATE_HASH(ins_h, window[(s) + MIN_MATCH-1]), \
+    prev[(s) & WMASK] = match_head = head[ins_h], \
+    head[ins_h] = (s))
+
+/* ===========================================================================
+ * Initialize the "longest match" routines for a new file
+ */
+static void lm_init(ush * flags)
+{
+        register unsigned j;
+
+        /* Initialize the hash table. */
+        memzero((char *) head, HASH_SIZE * sizeof(*head));
+        /* prev will be initialized on the fly */
+
+        *flags |= SLOW;
+        /* ??? reduce max_chain_length for binary files */
+
+        strstart = 0;
+        block_start = 0L;
+
+        lookahead = read_buf((char *) window,
+                                                 sizeof(int) <= 2 ? (unsigned) WSIZE : 2 * WSIZE);
+
+        if (lookahead == 0 || lookahead == (unsigned) EOF) {
+                eofile = 1, lookahead = 0;
+                return;
+        }
+        eofile = 0;
+        /* Make sure that we always have enough lookahead. This is important
+         * if input comes from a device such as a tty.
+         */
+        while (lookahead < MIN_LOOKAHEAD && !eofile)
+                fill_window();
+
+        ins_h = 0;
+        for (j = 0; j < MIN_MATCH - 1; j++)
+                UPDATE_HASH(ins_h, window[j]);
+        /* If lookahead < MIN_MATCH, ins_h is garbage, but this is
+         * not important since only literal bytes will be emitted.
+         */
+}
+
+/* ===========================================================================
+ * Set match_start to the longest match starting at the given string and
+ * return its length. Matches shorter or equal to prev_length are discarded,
+ * in which case the result is equal to prev_length and match_start is
+ * garbage.
+ * IN assertions: cur_match is the head of the hash chain for the current
+ *   string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1
+ */
+
+/* For MSDOS, OS/2 and 386 Unix, an optimized version is in match.asm or
+ * match.s. The code is functionally equivalent, so you can use the C version
+ * if desired.
+ */
+static int longest_match(IPos cur_match)
+{
+        unsigned chain_length = max_chain_length;       /* max hash chain length */
+        register uch *scan = window + strstart; /* current string */
+        register uch *match;    /* matched string */
+        register int len;       /* length of current match */
+        int best_len = prev_length;     /* best match length so far */
+        IPos limit =
+                strstart > (IPos) MAX_DIST ? strstart - (IPos) MAX_DIST : NIL;
+        /* Stop when cur_match becomes <= limit. To simplify the code,
+         * we prevent matches with the string of window index 0.
+         */
+
+/* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
+ * It is easy to get rid of this optimization if necessary.
+ */
+#if HASH_BITS < 8 || MAX_MATCH != 258
+#  error Code too clever
+#endif
+        register uch *strend = window + strstart + MAX_MATCH;
+        register uch scan_end1 = scan[best_len - 1];
+        register uch scan_end = scan[best_len];
+
+        /* Do not waste too much time if we already have a good match: */
+        if (prev_length >= good_match) {
+                chain_length >>= 2;
+        }
+        Assert(strstart <= window_size - MIN_LOOKAHEAD, "insufficient lookahead");
+
+        do {
+                Assert(cur_match < strstart, "no future");
+                match = window + cur_match;
+
+                /* Skip to next match if the match length cannot increase
+                 * or if the match length is less than 2:
+                 */
+                if (match[best_len] != scan_end ||
+                        match[best_len - 1] != scan_end1 ||
+                        *match != *scan || *++match != scan[1])
+                        continue;
+
+                /* The check at best_len-1 can be removed because it will be made
+                 * again later. (This heuristic is not always a win.)
+                 * It is not necessary to compare scan[2] and match[2] since they
+                 * are always equal when the other bytes match, given that
+                 * the hash keys are equal and that HASH_BITS >= 8.
+                 */
+                scan += 2, match++;
+
+                /* We check for insufficient lookahead only every 8th comparison;
+                 * the 256th check will be made at strstart+258.
+                 */
+                do {
+                } while (*++scan == *++match && *++scan == *++match &&
+                                 *++scan == *++match && *++scan == *++match &&
+                                 *++scan == *++match && *++scan == *++match &&
+                                 *++scan == *++match && *++scan == *++match && scan < strend);
+
+                len = MAX_MATCH - (int) (strend - scan);
+                scan = strend - MAX_MATCH;
+
+                if (len > best_len) {
+                        match_start = cur_match;
+                        best_len = len;
+                        if (len >= nice_match)
+                                break;
+                        scan_end1 = scan[best_len - 1];
+                        scan_end = scan[best_len];
+                }
+        } while ((cur_match = prev[cur_match & WMASK]) > limit
+                         && --chain_length != 0);
+
+        return best_len;
+}
+
+#ifdef DEBUG
+/* ===========================================================================
+ * Check that the match at match_start is indeed a match.
+ */
+static void check_match(IPos start, IPos match, int length)
+{
+        /* check that the match is indeed a match */
+        if (memcmp((char *) window + match,
+                           (char *) window + start, length) != EQUAL) {
+                bb_error_msg(" start %d, match %d, length %d", start, match, length);
+                bb_error_msg("invalid match");
+        }
+        if (verbose > 1) {
+                bb_error_msg("\\[%d,%d]", start - match, length);
+                do {
+                        putc(window[start++], stderr);
+                } while (--length != 0);
+        }
+}
+#else
+#  define check_match(start, match, length)
+#endif
+
+/* ===========================================================================
+ * Fill the window when the lookahead becomes insufficient.
+ * Updates strstart and lookahead, and sets eofile if end of input file.
+ * IN assertion: lookahead < MIN_LOOKAHEAD && strstart + lookahead > 0
+ * OUT assertions: at least one byte has been read, or eofile is set;
+ *    file reads are performed for at least two bytes (required for the
+ *    translate_eol option).
+ */
+static void fill_window()
+{
+        register unsigned n, m;
+        unsigned more =
+                (unsigned) (window_size - (ulg) lookahead - (ulg) strstart);
+        /* Amount of free space at the end of the window. */
+
+        /* If the window is almost full and there is insufficient lookahead,
+         * move the upper half to the lower one to make room in the upper half.
+         */
+        if (more == (unsigned) EOF) {
+                /* Very unlikely, but possible on 16 bit machine if strstart == 0
+                 * and lookahead == 1 (input done one byte at time)
+                 */
+                more--;
+        } else if (strstart >= WSIZE + MAX_DIST) {
+                /* By the IN assertion, the window is not empty so we can't confuse
+                 * more == 0 with more == 64K on a 16 bit machine.
+                 */
+                Assert(window_size == (ulg) 2 * WSIZE, "no sliding with BIG_MEM");
+
+                memcpy((char *) window, (char *) window + WSIZE, (unsigned) WSIZE);
+                match_start -= WSIZE;
+                strstart -= WSIZE;      /* we now have strstart >= MAX_DIST: */
+
+                block_start -= (long) WSIZE;
+
+                for (n = 0; n < HASH_SIZE; n++) {
+                        m = head[n];
+                        head[n] = (Pos) (m >= WSIZE ? m - WSIZE : NIL);
+                }
+                for (n = 0; n < WSIZE; n++) {
+                        m = prev[n];
+                        prev[n] = (Pos) (m >= WSIZE ? m - WSIZE : NIL);
+                        /* If n is not on any hash chain, prev[n] is garbage but
+                         * its value will never be used.
+                         */
+                }
+                more += WSIZE;
+        }
+        /* At this point, more >= 2 */
+        if (!eofile) {
+                n = read_buf((char *) window + strstart + lookahead, more);
+                if (n == 0 || n == (unsigned) EOF) {
+                        eofile = 1;
+                } else {
+                        lookahead += n;
+                }
+        }
+}
+
+/* ===========================================================================
+ * Flush the current block, with given end-of-file flag.
+ * IN assertion: strstart is set to the end of the current match.
+ */
+#define FLUSH_BLOCK(eof) \
+   flush_block(block_start >= 0L ? (char*)&window[(unsigned)block_start] : \
+                (char*)NULL, (long)strstart - block_start, (eof))
+
+/* ===========================================================================
+ * Same as above, but achieves better compression. We use a lazy
+ * evaluation for matches: a match is finally adopted only if there is
+ * no better match at the next window position.
+ */
+static ulg deflate()
+{
+        IPos hash_head;         /* head of hash chain */
+        IPos prev_match;        /* previous match */
+        int flush;                      /* set if current block must be flushed */
+        int match_available = 0;        /* set if previous match exists */
+        register unsigned match_length = MIN_MATCH - 1; /* length of best match */
+
+        /* Process the input block. */
+        while (lookahead != 0) {
+                /* Insert the string window[strstart .. strstart+2] in the
+                 * dictionary, and set hash_head to the head of the hash chain:
+                 */
+                INSERT_STRING(strstart, hash_head);
+
+                /* Find the longest match, discarding those <= prev_length.
+                 */
+                prev_length = match_length, prev_match = match_start;
+                match_length = MIN_MATCH - 1;
+
+                if (hash_head != NIL && prev_length < max_lazy_match &&
+                        strstart - hash_head <= MAX_DIST) {
+                        /* To simplify the code, we prevent matches with the string
+                         * of window index 0 (in particular we have to avoid a match
+                         * of the string with itself at the start of the input file).
+                         */
+                        match_length = longest_match(hash_head);
+                        /* longest_match() sets match_start */
+                        if (match_length > lookahead)
+                                match_length = lookahead;
+
+                        /* Ignore a length 3 match if it is too distant: */
+                        if (match_length == MIN_MATCH && strstart - match_start > TOO_FAR) {
+                                /* If prev_match is also MIN_MATCH, match_start is garbage
+                                 * but we will ignore the current match anyway.
+                                 */
+                                match_length--;
+                        }
+                }
+                /* If there was a match at the previous step and the current
+                 * match is not better, output the previous match:
+                 */
+                if (prev_length >= MIN_MATCH && match_length <= prev_length) {
+
+                        check_match(strstart - 1, prev_match, prev_length);
+
+                        flush =
+                                ct_tally(strstart - 1 - prev_match, prev_length - MIN_MATCH);
+
+                        /* Insert in hash table all strings up to the end of the match.
+                         * strstart-1 and strstart are already inserted.
+                         */
+                        lookahead -= prev_length - 1;
+                        prev_length -= 2;
+                        do {
+                                strstart++;
+                                INSERT_STRING(strstart, hash_head);
+                                /* strstart never exceeds WSIZE-MAX_MATCH, so there are
+                                 * always MIN_MATCH bytes ahead. If lookahead < MIN_MATCH
+                                 * these bytes are garbage, but it does not matter since the
+                                 * next lookahead bytes will always be emitted as literals.
+                                 */
+                        } while (--prev_length != 0);
+                        match_available = 0;
+                        match_length = MIN_MATCH - 1;
+                        strstart++;
+                        if (flush)
+                                FLUSH_BLOCK(0), block_start = strstart;
+
+                } else if (match_available) {
+                        /* If there was no match at the previous position, output a
+                         * single literal. If there was a match but the current match
+                         * is longer, truncate the previous match to a single literal.
+                         */
+                        Tracevv((stderr, "%c", window[strstart - 1]));
+                        if (ct_tally(0, window[strstart - 1])) {
+                                FLUSH_BLOCK(0), block_start = strstart;
+                        }
+                        strstart++;
+                        lookahead--;
+                } else {
+                        /* There is no previous match to compare with, wait for
+                         * the next step to decide.
+                         */
+                        match_available = 1;
+                        strstart++;
+                        lookahead--;
+                }
+                Assert(strstart <= isize && lookahead <= isize, "a bit too far");
+
+                /* Make sure that we always have enough lookahead, except
+                 * at the end of the input file. We need MAX_MATCH bytes
+                 * for the next match, plus MIN_MATCH bytes to insert the
+                 * string following the next match.
+                 */
+                while (lookahead < MIN_LOOKAHEAD && !eofile)
+                        fill_window();
+        }
+        if (match_available)
+                ct_tally(0, window[strstart - 1]);
+
+        return FLUSH_BLOCK(1);  /* eof */
+}
+
+/* gzip (GNU zip) -- compress files with zip algorithm and 'compress' interface
+ * Copyright (C) 1992-1993 Jean-loup Gailly
+ * The unzip code was written and put in the public domain by Mark Adler.
+ * Portions of the lzw code are derived from the public domain 'compress'
+ * written by Spencer Thomas, Joe Orost, James Woods, Jim McKie, Steve Davies,
+ * Ken Turkowski, Dave Mack and Peter Jannesen.
+ *
+ * See the license_msg below and the file COPYING for the software license.
+ * See the file algorithm.doc for the compression algorithms and file formats.
+ */
+
+/* Compress files with zip algorithm and 'compress' interface.
+ * See usage() and help() functions below for all options.
+ * Outputs:
+ *        file.gz:   compressed file with same mode, owner, and utimes
+ *     or stdout with -c option or if stdin used as input.
+ * If the output file name had to be truncated, the original name is kept
+ * in the compressed file.
+ */
+
+                /* configuration */
+
+typedef struct dirent dir_type;
+
+typedef RETSIGTYPE(*sig_type) (int);
+
+/* ======================================================================== */
+int gzip_main(int argc, char **argv)
+{
+        int result;
+        int inFileNum;
+        int outFileNum;
+        struct stat statBuf;
+        char *delFileName;
+        int tostdout = 0;
+        int force = 0;
+        int opt;
+
+        while ((opt = getopt(argc, argv, "cf0123456789dq")) != -1) {
+                switch (opt) {
+                case 'c':
+                        tostdout = 1;
+                        break;
+                case 'f':
+                        force = 1;
+                        break;
+
+                case '0':
+                        just_store = 1;
+                        break;
+
+                        /* Ignore 1-9 (compression level) options */
+                case '1':
+                case '2':
+                case '3':
+                case '4':
+                case '5':
+                case '6':
+                case '7':
+                case '8':
+                case '9':
+                        break;
+                case 'q':
+                        break;
+#ifdef CONFIG_GUNZIP
+                case 'd':
+                        optind = 1;
+                        return gunzip_main(argc, argv);
+#endif
+                default:
+                        bb_show_usage();
+                }
+        }
+
+        foreground = signal(SIGINT, SIG_IGN) != SIG_IGN;
+        if (foreground) {
+                (void) signal(SIGINT, (sig_type) abort_gzip);
+        }
+#ifdef SIGTERM
+        if (signal(SIGTERM, SIG_IGN) != SIG_IGN) {
+                (void) signal(SIGTERM, (sig_type) abort_gzip);
+        }
+#endif
+#ifdef SIGHUP
+        if (signal(SIGHUP, SIG_IGN) != SIG_IGN) {
+                (void) signal(SIGHUP, (sig_type) abort_gzip);
+        }
+#endif
+
+        strncpy(z_suffix, Z_SUFFIX, sizeof(z_suffix) - 1);
+        z_len = strlen(z_suffix);
+
+        /* Allocate all global buffers (for DYN_ALLOC option) */
+        ALLOC(uch, inbuf, INBUFSIZ + INBUF_EXTRA);
+        ALLOC(uch, outbuf, OUTBUFSIZ + OUTBUF_EXTRA);
+        ALLOC(ush, d_buf, DIST_BUFSIZE);
+        ALLOC(uch, window, 2L * WSIZE);
+        ALLOC(ush, tab_prefix, 1L << BITS);
+
+        clear_bufs();
+        part_nb = 0;
+
+        if (optind == argc) {
+                time_stamp = 0;
+                ifile_size = -1L;
+                zip(STDIN_FILENO, STDOUT_FILENO);
+        } else {
+                int i;
+
+                for (i = optind; i < argc; i++) {
+                        char *path = NULL;
+
+                        if (strcmp(argv[i], "-") == 0) {
+                                time_stamp = 0;
+                                ifile_size = -1L;
+                                inFileNum = STDIN_FILENO;
+                                outFileNum = STDOUT_FILENO;
+                        } else {
+                                inFileNum = open(argv[i], O_RDONLY);
+                                if (inFileNum < 0 || fstat(inFileNum, &statBuf) < 0)
+                                        bb_perror_msg_and_die("%s", argv[i]);
+                                time_stamp = statBuf.st_ctime;
+                                ifile_size = statBuf.st_size;
+
+                                if (!tostdout) {
+                                        path = xmalloc(strlen(argv[i]) + 4);
+                                        strcpy(path, argv[i]);
+                                        strcat(path, ".gz");
+
+                                        /* Open output file */
+#if (__GLIBC__ >= 2) && (__GLIBC_MINOR__ >= 1)
+                                        outFileNum =
+                                                open(path, O_RDWR | O_CREAT | O_EXCL | O_NOFOLLOW);
+#else
+                                        outFileNum = open(path, O_RDWR | O_CREAT | O_EXCL);
+#endif
+                                        if (outFileNum < 0) {
+                                                bb_perror_msg("%s", path);
+                                                free(path);
+                                                continue;
+                                        }
+
+                                        /* Set permissions on the file */
+                                        fchmod(outFileNum, statBuf.st_mode);
+                                } else
+                                        outFileNum = STDOUT_FILENO;
+                        }
+
+                        if (path == NULL && isatty(outFileNum) && force == 0) {
+                                bb_error_msg
+                                        ("compressed data not written to a terminal. Use -f to force compression.");
+                                free(path);
+                                continue;
+                        }
+
+                        result = zip(inFileNum, outFileNum);
+
+                        if (path != NULL) {
+                                close(inFileNum);
+                                close(outFileNum);
+
+                                /* Delete the original file */
+                                if (result == OK)
+                                        delFileName = argv[i];
+                                else
+                                        delFileName = path;
+
+                                if (unlink(delFileName) < 0)
+                                        bb_perror_msg("%s", delFileName);
+                        }
+
+                        free(path);
+                }
+        }
+
+        return (exit_code);
+}
+
+/* trees.c -- output deflated data using Huffman coding
+ * Copyright (C) 1992-1993 Jean-loup Gailly
+ * This is free software; you can redistribute it and/or modify it under the
+ * terms of the GNU General Public License, see the file COPYING.
+ */
+
+/*
+ *  PURPOSE
+ *
+ *      Encode various sets of source values using variable-length
+ *      binary code trees.
+ *
+ *  DISCUSSION
+ *
+ *      The PKZIP "deflation" process uses several Huffman trees. The more
+ *      common source values are represented by shorter bit sequences.
+ *
+ *      Each code tree is stored in the ZIP file in a compressed form
+ *      which is itself a Huffman encoding of the lengths of
+ *      all the code strings (in ascending order by source values).
+ *      The actual code strings are reconstructed from the lengths in
+ *      the UNZIP process, as described in the "application note"
+ *      (APPNOTE.TXT) distributed as part of PKWARE's PKZIP program.
+ *
+ *  REFERENCES
+ *
+ *      Lynch, Thomas J.
+ *          Data Compression:  Techniques and Applications, pp. 53-55.
+ *          Lifetime Learning Publications, 1985.  ISBN 0-534-03418-7.
+ *
+ *      Storer, James A.
+ *          Data Compression:  Methods and Theory, pp. 49-50.
+ *          Computer Science Press, 1988.  ISBN 0-7167-8156-5.
+ *
+ *      Sedgewick, R.
+ *          Algorithms, p290.
+ *          Addison-Wesley, 1983. ISBN 0-201-06672-6.
+ *
+ *  INTERFACE
+ *
+ *      void ct_init (ush *attr, int *methodp)
+ *          Allocate the match buffer, initialize the various tables and save
+ *          the location of the internal file attribute (ascii/binary) and
+ *          method (DEFLATE/STORE)
+ *
+ *      void ct_tally (int dist, int lc);
+ *          Save the match info and tally the frequency counts.
+ *
+ *      long flush_block (char *buf, ulg stored_len, int eof)
+ *          Determine the best encoding for the current block: dynamic trees,
+ *          static trees or store, and output the encoded block to the zip
+ *          file. Returns the total compressed length for the file so far.
+ *
+ */
+
+/* ===========================================================================
+ * Constants
+ */
+
+#define MAX_BITS 15
+/* All codes must not exceed MAX_BITS bits */
+
+#define MAX_BL_BITS 7
+/* Bit length codes must not exceed MAX_BL_BITS bits */
+
+#define LENGTH_CODES 29
+/* number of length codes, not counting the special END_BLOCK code */
+
+#define LITERALS  256
+/* number of literal bytes 0..255 */
+
+#define END_BLOCK 256
+/* end of block literal code */
+
+#define L_CODES (LITERALS+1+LENGTH_CODES)
+/* number of Literal or Length codes, including the END_BLOCK code */
+
+#define D_CODES   30
+/* number of distance codes */
+
+#define BL_CODES  19
+/* number of codes used to transfer the bit lengths */
+
+typedef uch extra_bits_t;
+
+/* extra bits for each length code */
+static const extra_bits_t extra_lbits[LENGTH_CODES]
+        = { 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2, 3, 3, 3, 3, 4, 4,
+        4, 4, 5, 5, 5, 5, 0
+};
+
+/* extra bits for each distance code */
+static const extra_bits_t extra_dbits[D_CODES]
+        = { 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, 7, 7, 8, 8, 9, 9,
+        10, 10, 11, 11, 12, 12, 13, 13
+};
+
+/* extra bits for each bit length code */
+static const extra_bits_t extra_blbits[BL_CODES]
+= { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 2, 3, 7 };
+
+#define STORED_BLOCK 0
+#define STATIC_TREES 1
+#define DYN_TREES    2
+/* The three kinds of block type */
+
+#ifndef LIT_BUFSIZE
+#  ifdef SMALL_MEM
+#    define LIT_BUFSIZE  0x2000
+#  else
+#  ifdef MEDIUM_MEM
+#    define LIT_BUFSIZE  0x4000
+#  else
+#    define LIT_BUFSIZE  0x8000
+#  endif
+#  endif
+#endif
+#ifndef DIST_BUFSIZE
+#  define DIST_BUFSIZE  LIT_BUFSIZE
+#endif
+/* Sizes of match buffers for literals/lengths and distances.  There are
+ * 4 reasons for limiting LIT_BUFSIZE to 64K:
+ *   - frequencies can be kept in 16 bit counters
+ *   - if compression is not successful for the first block, all input data is
+ *     still in the window so we can still emit a stored block even when input
+ *     comes from standard input.  (This can also be done for all blocks if
+ *     LIT_BUFSIZE is not greater than 32K.)
+ *   - if compression is not successful for a file smaller than 64K, we can
+ *     even emit a stored file instead of a stored block (saving 5 bytes).
+ *   - creating new Huffman trees less frequently may not provide fast
+ *     adaptation to changes in the input data statistics. (Take for
+ *     example a binary file with poorly compressible code followed by
+ *     a highly compressible string table.) Smaller buffer sizes give
+ *     fast adaptation but have of course the overhead of transmitting trees
+ *     more frequently.
+ *   - I can't count above 4
+ * The current code is general and allows DIST_BUFSIZE < LIT_BUFSIZE (to save
+ * memory at the expense of compression). Some optimizations would be possible
+ * if we rely on DIST_BUFSIZE == LIT_BUFSIZE.
+ */
+#if LIT_BUFSIZE > INBUFSIZ
+#error cannot overlay l_buf and inbuf
+#endif
+#define REP_3_6      16
+/* repeat previous bit length 3-6 times (2 bits of repeat count) */
+#define REPZ_3_10    17
+/* repeat a zero length 3-10 times  (3 bits of repeat count) */
+#define REPZ_11_138  18
+/* repeat a zero length 11-138 times  (7 bits of repeat count) */
+
+/* ===========================================================================
+ * Local data
+ */
+
+/* Data structure describing a single value and its code string. */
+typedef struct ct_data {
+        union {
+                ush freq;               /* frequency count */
+                ush code;               /* bit string */
+        } fc;
+        union {
+                ush dad;                /* father node in Huffman tree */
+                ush len;                /* length of bit string */
+        } dl;
+} ct_data;
+
+#define Freq fc.freq
+#define Code fc.code
+#define Dad  dl.dad
+#define Len  dl.len
+
+#define HEAP_SIZE (2*L_CODES+1)
+/* maximum heap size */
+
+static ct_data dyn_ltree[HEAP_SIZE];    /* literal and length tree */
+static ct_data dyn_dtree[2 * D_CODES + 1];      /* distance tree */
+
+static ct_data static_ltree[L_CODES + 2];
+
+/* The static literal tree. Since the bit lengths are imposed, there is no
+ * need for the L_CODES extra codes used during heap construction. However
+ * The codes 286 and 287 are needed to build a canonical tree (see ct_init
+ * below).
+ */
+
+static ct_data static_dtree[D_CODES];
+
+/* The static distance tree. (Actually a trivial tree since all codes use
+ * 5 bits.)
+ */
+
+static ct_data bl_tree[2 * BL_CODES + 1];
+
+/* Huffman tree for the bit lengths */
+
+typedef struct tree_desc {
+        ct_data *dyn_tree;      /* the dynamic tree */
+        ct_data *static_tree;   /* corresponding static tree or NULL */
+        const extra_bits_t *extra_bits; /* extra bits for each code or NULL */
+        int extra_base;         /* base index for extra_bits */
+        int elems;                      /* max number of elements in the tree */
+        int max_length;         /* max bit length for the codes */
+        int max_code;           /* largest code with non zero frequency */
+} tree_desc;
+
+static tree_desc l_desc =
+        { dyn_ltree, static_ltree, extra_lbits, LITERALS + 1, L_CODES,
+        MAX_BITS, 0
+};
+
+static tree_desc d_desc =
+        { dyn_dtree, static_dtree, extra_dbits, 0, D_CODES, MAX_BITS, 0 };
+
+static tree_desc bl_desc =
+        { bl_tree, (ct_data *) 0, extra_blbits, 0, BL_CODES, MAX_BL_BITS,
+        0
+};
+
+
+static ush bl_count[MAX_BITS + 1];
+
+/* number of codes at each bit length for an optimal tree */
+
+static const uch bl_order[BL_CODES]
+= { 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15 };
+
+/* The lengths of the bit length codes are sent in order of decreasing
+ * probability, to avoid transmitting the lengths for unused bit length codes.
+ */
+
+static int heap[2 * L_CODES + 1];       /* heap used to build the Huffman trees */
+static int heap_len;    /* number of elements in the heap */
+static int heap_max;    /* element of largest frequency */
+
+/* The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used.
+ * The same heap array is used to build all trees.
+ */
+
+static uch depth[2 * L_CODES + 1];
+
+/* Depth of each subtree used as tie breaker for trees of equal frequency */
+
+static uch length_code[MAX_MATCH - MIN_MATCH + 1];
+
+/* length code for each normalized match length (0 == MIN_MATCH) */
+
+static uch dist_code[512];
+
+/* distance codes. The first 256 values correspond to the distances
+ * 3 .. 258, the last 256 values correspond to the top 8 bits of
+ * the 15 bit distances.
+ */
+
+static int base_length[LENGTH_CODES];
+
+/* First normalized length for each code (0 = MIN_MATCH) */
+
+static int base_dist[D_CODES];
+
+/* First normalized distance for each code (0 = distance of 1) */
+
+#define l_buf inbuf
+/* DECLARE(uch, l_buf, LIT_BUFSIZE);  buffer for literals or lengths */
+
+/* DECLARE(ush, d_buf, DIST_BUFSIZE); buffer for distances */
+
+static uch flag_buf[(LIT_BUFSIZE / 8)];
+
+/* flag_buf is a bit array distinguishing literals from lengths in
+ * l_buf, thus indicating the presence or absence of a distance.
+ */
+
+static unsigned last_lit;       /* running index in l_buf */
+static unsigned last_dist;      /* running index in d_buf */
+static unsigned last_flags;     /* running index in flag_buf */
+static uch flags;               /* current flags not yet saved in flag_buf */
+static uch flag_bit;    /* current bit used in flags */
+
+/* bits are filled in flags starting at bit 0 (least significant).
+ * Note: these flags are overkill in the current code since we don't
+ * take advantage of DIST_BUFSIZE == LIT_BUFSIZE.
+ */
+
+static ulg opt_len;             /* bit length of current block with optimal trees */
+static ulg static_len;  /* bit length of current block with static trees */
+
+static ulg compressed_len;      /* total bit length of compressed file */
+
+
+static ush *file_type;  /* pointer to UNKNOWN, BINARY or ASCII */
+static int *file_method;        /* pointer to DEFLATE or STORE */
+
+/* ===========================================================================
+ * Local (static) routines in this file.
+ */
+
+static void init_block(void);
+static void pqdownheap(ct_data * tree, int k);
+static void gen_bitlen(tree_desc * desc);
+static void gen_codes(ct_data * tree, int max_code);
+static void build_tree(tree_desc * desc);
+static void scan_tree(ct_data * tree, int max_code);
+static void send_tree(ct_data * tree, int max_code);
+static int build_bl_tree(void);
+static void send_all_trees(int lcodes, int dcodes, int blcodes);
+static void compress_block(ct_data * ltree, ct_data * dtree);
+static void set_file_type(void);
+
+
+#ifndef DEBUG
+#  define send_code(c, tree) send_bits(tree[c].Code, tree[c].Len)
+   /* Send a code of the given tree. c and tree must not have side effects */
+
+#else                                                   /* DEBUG */
+#  define send_code(c, tree) \
+     { if (verbose>1) bb_error_msg("\ncd %3d ",(c)); \
+       send_bits(tree[c].Code, tree[c].Len); }
+#endif
+
+#define d_code(dist) \
+   ((dist) < 256 ? dist_code[dist] : dist_code[256+((dist)>>7)])
+/* Mapping from a distance to a distance code. dist is the distance - 1 and
+ * must not have side effects. dist_code[256] and dist_code[257] are never
+ * used.
+ */
+
+/* the arguments must not have side effects */
+
+/* ===========================================================================
+ * Allocate the match buffer, initialize the various tables and save the
+ * location of the internal file attribute (ascii/binary) and method
+ * (DEFLATE/STORE).
+ */
+static void ct_init(ush * attr, int *methodp)
+{
+        int n;                          /* iterates over tree elements */
+        int bits;                       /* bit counter */
+        int length;                     /* length value */
+        int code;                       /* code value */
+        int dist;                       /* distance index */
+
+        file_type = attr;
+        file_method = methodp;
+        compressed_len = 0L;
+
+        if (static_dtree[0].Len != 0)
+                return;                 /* ct_init already called */
+
+        /* Initialize the mapping length (0..255) -> length code (0..28) */
+        length = 0;
+        for (code = 0; code < LENGTH_CODES - 1; code++) {
+                base_length[code] = length;
+                for (n = 0; n < (1 << extra_lbits[code]); n++) {
+                        length_code[length++] = (uch) code;
+                }
+        }
+        Assert(length == 256, "ct_init: length != 256");
+        /* Note that the length 255 (match length 258) can be represented
+         * in two different ways: code 284 + 5 bits or code 285, so we
+         * overwrite length_code[255] to use the best encoding:
+         */
+        length_code[length - 1] = (uch) code;
+
+        /* Initialize the mapping dist (0..32K) -> dist code (0..29) */
+        dist = 0;
+        for (code = 0; code < 16; code++) {
+                base_dist[code] = dist;
+                for (n = 0; n < (1 << extra_dbits[code]); n++) {
+                        dist_code[dist++] = (uch) code;
+                }
+        }
+        Assert(dist == 256, "ct_init: dist != 256");
+        dist >>= 7;                     /* from now on, all distances are divided by 128 */
+        for (; code < D_CODES; code++) {
+                base_dist[code] = dist << 7;
+                for (n = 0; n < (1 << (extra_dbits[code] - 7)); n++) {
+                        dist_code[256 + dist++] = (uch) code;
+                }
+        }
+        Assert(dist == 256, "ct_init: 256+dist != 512");
+
+        /* Construct the codes of the static literal tree */
+        for (bits = 0; bits <= MAX_BITS; bits++)
+                bl_count[bits] = 0;
+        n = 0;
+        while (n <= 143)
+                static_ltree[n++].Len = 8, bl_count[8]++;
+        while (n <= 255)
+                static_ltree[n++].Len = 9, bl_count[9]++;
+        while (n <= 279)
+                static_ltree[n++].Len = 7, bl_count[7]++;
+        while (n <= 287)
+                static_ltree[n++].Len = 8, bl_count[8]++;
+        /* Codes 286 and 287 do not exist, but we must include them in the
+         * tree construction to get a canonical Huffman tree (longest code
+         * all ones)
+         */
+        gen_codes((ct_data *) static_ltree, L_CODES + 1);
+
+        /* The static distance tree is trivial: */
+        for (n = 0; n < D_CODES; n++) {
+                static_dtree[n].Len = 5;
+                static_dtree[n].Code = bi_reverse(n, 5);
+        }
+
+        /* Initialize the first block of the first file: */
+        init_block();
+}
+
+/* ===========================================================================
+ * Initialize a new block.
+ */
+static void init_block()
+{
+        int n;                          /* iterates over tree elements */
+
+        /* Initialize the trees. */
+        for (n = 0; n < L_CODES; n++)
+                dyn_ltree[n].Freq = 0;
+        for (n = 0; n < D_CODES; n++)
+                dyn_dtree[n].Freq = 0;
+        for (n = 0; n < BL_CODES; n++)
+                bl_tree[n].Freq = 0;
+
+        dyn_ltree[END_BLOCK].Freq = 1;
+        opt_len = static_len = 0L;
+        last_lit = last_dist = last_flags = 0;
+        flags = 0;
+        flag_bit = 1;
+}
+
+#define SMALLEST 1
+/* Index within the heap array of least frequent node in the Huffman tree */
+
+
+/* ===========================================================================
+ * Remove the smallest element from the heap and recreate the heap with
+ * one less element. Updates heap and heap_len.
+ */
+#define pqremove(tree, top) \
+{\
+    top = heap[SMALLEST]; \
+    heap[SMALLEST] = heap[heap_len--]; \
+    pqdownheap(tree, SMALLEST); \
+}
+
+/* ===========================================================================
+ * Compares to subtrees, using the tree depth as tie breaker when
+ * the subtrees have equal frequency. This minimizes the worst case length.
+ */
+#define smaller(tree, n, m) \
+   (tree[n].Freq < tree[m].Freq || \
+   (tree[n].Freq == tree[m].Freq && depth[n] <= depth[m]))
+
+/* ===========================================================================
+ * Restore the heap property by moving down the tree starting at node k,
+ * exchanging a node with the smallest of its two sons if necessary, stopping
+ * when the heap property is re-established (each father smaller than its
+ * two sons).
+ */
+static void pqdownheap(ct_data * tree, int k)
+{
+        int v = heap[k];
+        int j = k << 1;         /* left son of k */
+
+        while (j <= heap_len) {
+                /* Set j to the smallest of the two sons: */
+                if (j < heap_len && smaller(tree, heap[j + 1], heap[j]))
+                        j++;
+
+                /* Exit if v is smaller than both sons */
+                if (smaller(tree, v, heap[j]))
+                        break;
+
+                /* Exchange v with the smallest son */
+                heap[k] = heap[j];
+                k = j;
+
+                /* And continue down the tree, setting j to the left son of k */
+                j <<= 1;
+        }
+        heap[k] = v;
+}
+
+/* ===========================================================================
+ * Compute the optimal bit lengths for a tree and update the total bit length
+ * for the current block.
+ * IN assertion: the fields freq and dad are set, heap[heap_max] and
+ *    above are the tree nodes sorted by increasing frequency.
+ * OUT assertions: the field len is set to the optimal bit length, the
+ *     array bl_count contains the frequencies for each bit length.
+ *     The length opt_len is updated; static_len is also updated if stree is
+ *     not null.
+ */
+static void gen_bitlen(tree_desc * desc)
+{
+        ct_data *tree = desc->dyn_tree;
+        const extra_bits_t *extra = desc->extra_bits;
+        int base = desc->extra_base;
+        int max_code = desc->max_code;
+        int max_length = desc->max_length;
+        ct_data *stree = desc->static_tree;
+        int h;                          /* heap index */
+        int n, m;                       /* iterate over the tree elements */
+        int bits;                       /* bit length */
+        int xbits;                      /* extra bits */
+        ush f;                          /* frequency */
+        int overflow = 0;       /* number of elements with bit length too large */
+
+        for (bits = 0; bits <= MAX_BITS; bits++)
+                bl_count[bits] = 0;
+
+        /* In a first pass, compute the optimal bit lengths (which may
+         * overflow in the case of the bit length tree).
+         */
+        tree[heap[heap_max]].Len = 0;   /* root of the heap */
+
+        for (h = heap_max + 1; h < HEAP_SIZE; h++) {
+                n = heap[h];
+                bits = tree[tree[n].Dad].Len + 1;
+                if (bits > max_length)
+                        bits = max_length, overflow++;
+                tree[n].Len = (ush) bits;
+                /* We overwrite tree[n].Dad which is no longer needed */
+
+                if (n > max_code)
+                        continue;       /* not a leaf node */
+
+                bl_count[bits]++;
+                xbits = 0;
+                if (n >= base)
+                        xbits = extra[n - base];
+                f = tree[n].Freq;
+                opt_len += (ulg) f *(bits + xbits);
+
+                if (stree)
+                        static_len += (ulg) f *(stree[n].Len + xbits);
+        }
+        if (overflow == 0)
+                return;
+
+        Trace((stderr, "\nbit length overflow\n"));
+        /* This happens for example on obj2 and pic of the Calgary corpus */
+
+        /* Find the first bit length which could increase: */
+        do {
+                bits = max_length - 1;
+                while (bl_count[bits] == 0)
+                        bits--;
+                bl_count[bits]--;       /* move one leaf down the tree */
+                bl_count[bits + 1] += 2;        /* move one overflow item as its brother */
+                bl_count[max_length]--;
+                /* The brother of the overflow item also moves one step up,
+                 * but this does not affect bl_count[max_length]
+                 */
+                overflow -= 2;
+        } while (overflow > 0);
+
+        /* Now recompute all bit lengths, scanning in increasing frequency.
+         * h is still equal to HEAP_SIZE. (It is simpler to reconstruct all
+         * lengths instead of fixing only the wrong ones. This idea is taken
+         * from 'ar' written by Haruhiko Okumura.)
+         */
+        for (bits = max_length; bits != 0; bits--) {
+                n = bl_count[bits];
+                while (n != 0) {
+                        m = heap[--h];
+                        if (m > max_code)
+                                continue;
+                        if (tree[m].Len != (unsigned) bits) {
+                                Trace((stderr, "code %d bits %d->%d\n", m, tree[m].Len,
+                                           bits));
+                                opt_len +=
+                                        ((long) bits - (long) tree[m].Len) * (long) tree[m].Freq;
+                                tree[m].Len = (ush) bits;
+                        }
+                        n--;
+                }
+        }
+}
+
+/* ===========================================================================
+ * Generate the codes for a given tree and bit counts (which need not be
+ * optimal).
+ * IN assertion: the array bl_count contains the bit length statistics for
+ * the given tree and the field len is set for all tree elements.
+ * OUT assertion: the field code is set for all tree elements of non
+ *     zero code length.
+ */
+static void gen_codes(ct_data * tree, int max_code)
+{
+        ush next_code[MAX_BITS + 1];    /* next code value for each bit length */
+        ush code = 0;           /* running code value */
+        int bits;                       /* bit index */
+        int n;                          /* code index */
+
+        /* The distribution counts are first used to generate the code values
+         * without bit reversal.
+         */
+        for (bits = 1; bits <= MAX_BITS; bits++) {
+                next_code[bits] = code = (code + bl_count[bits - 1]) << 1;
+        }
+        /* Check that the bit counts in bl_count are consistent. The last code
+         * must be all ones.
+         */
+        Assert(code + bl_count[MAX_BITS] - 1 == (1 << MAX_BITS) - 1,
+                   "inconsistent bit counts");
+        Tracev((stderr, "\ngen_codes: max_code %d ", max_code));
+
+        for (n = 0; n <= max_code; n++) {
+                int len = tree[n].Len;
+
+                if (len == 0)
+                        continue;
+                /* Now reverse the bits */
+                tree[n].Code = bi_reverse(next_code[len]++, len);
+
+                Tracec(tree != static_ltree,
+                           (stderr, "\nn %3d %c l %2d c %4x (%x) ", n,
+                                (isgraph(n) ? n : ' '), len, tree[n].Code,
+                                next_code[len] - 1));
+        }
+}
+
+/* ===========================================================================
+ * Construct one Huffman tree and assigns the code bit strings and lengths.
+ * Update the total bit length for the current block.
+ * IN assertion: the field freq is set for all tree elements.
+ * OUT assertions: the fields len and code are set to the optimal bit length
+ *     and corresponding code. The length opt_len is updated; static_len is
+ *     also updated if stree is not null. The field max_code is set.
+ */
+static void build_tree(tree_desc * desc)
+{
+        ct_data *tree = desc->dyn_tree;
+        ct_data *stree = desc->static_tree;
+        int elems = desc->elems;
+        int n, m;                       /* iterate over heap elements */
+        int max_code = -1;      /* largest code with non zero frequency */
+        int node = elems;       /* next internal node of the tree */
+
+        /* Construct the initial heap, with least frequent element in
+         * heap[SMALLEST]. The sons of heap[n] are heap[2*n] and heap[2*n+1].
+         * heap[0] is not used.
+         */
+        heap_len = 0, heap_max = HEAP_SIZE;
+
+        for (n = 0; n < elems; n++) {
+                if (tree[n].Freq != 0) {
+                        heap[++heap_len] = max_code = n;
+                        depth[n] = 0;
+                } else {
+                        tree[n].Len = 0;
+                }
+        }
+
+        /* The pkzip format requires that at least one distance code exists,
+         * and that at least one bit should be sent even if there is only one
+         * possible code. So to avoid special checks later on we force at least
+         * two codes of non zero frequency.
+         */
+        while (heap_len < 2) {
+                int new = heap[++heap_len] = (max_code < 2 ? ++max_code : 0);
+
+                tree[new].Freq = 1;
+                depth[new] = 0;
+                opt_len--;
+                if (stree)
+                        static_len -= stree[new].Len;
+                /* new is 0 or 1 so it does not have extra bits */
+        }
+        desc->max_code = max_code;
+
+        /* The elements heap[heap_len/2+1 .. heap_len] are leaves of the tree,
+         * establish sub-heaps of increasing lengths:
+         */
+        for (n = heap_len / 2; n >= 1; n--)
+                pqdownheap(tree, n);
+
+        /* Construct the Huffman tree by repeatedly combining the least two
+         * frequent nodes.
+         */
+        do {
+                pqremove(tree, n);      /* n = node of least frequency */
+                m = heap[SMALLEST];     /* m = node of next least frequency */
+
+                heap[--heap_max] = n;   /* keep the nodes sorted by frequency */
+                heap[--heap_max] = m;
+
+                /* Create a new node father of n and m */
+                tree[node].Freq = tree[n].Freq + tree[m].Freq;
+                depth[node] = (uch) (MAX(depth[n], depth[m]) + 1);
+                tree[n].Dad = tree[m].Dad = (ush) node;
+#ifdef DUMP_BL_TREE
+                if (tree == bl_tree) {
+                        bb_error_msg("\nnode %d(%d), sons %d(%d) %d(%d)",
+                                        node, tree[node].Freq, n, tree[n].Freq, m, tree[m].Freq);
+                }
+#endif
+                /* and insert the new node in the heap */
+                heap[SMALLEST] = node++;
+                pqdownheap(tree, SMALLEST);
+
+        } while (heap_len >= 2);
+
+        heap[--heap_max] = heap[SMALLEST];
+
+        /* At this point, the fields freq and dad are set. We can now
+         * generate the bit lengths.
+         */
+        gen_bitlen((tree_desc *) desc);
+
+        /* The field len is now set, we can generate the bit codes */
+        gen_codes((ct_data *) tree, max_code);
+}
+
+/* ===========================================================================
+ * Scan a literal or distance tree to determine the frequencies of the codes
+ * in the bit length tree. Updates opt_len to take into account the repeat
+ * counts. (The contribution of the bit length codes will be added later
+ * during the construction of bl_tree.)
+ */
+static void scan_tree(ct_data * tree, int max_code)
+{
+        int n;                          /* iterates over all tree elements */
+        int prevlen = -1;       /* last emitted length */
+        int curlen;                     /* length of current code */
+        int nextlen = tree[0].Len;      /* length of next code */
+        int count = 0;          /* repeat count of the current code */
+        int max_count = 7;      /* max repeat count */
+        int min_count = 4;      /* min repeat count */
+
+        if (nextlen == 0)
+                max_count = 138, min_count = 3;
+        tree[max_code + 1].Len = (ush) 0xffff;  /* guard */
+
+        for (n = 0; n <= max_code; n++) {
+                curlen = nextlen;
+                nextlen = tree[n + 1].Len;
+                if (++count < max_count && curlen == nextlen) {
+                        continue;
+                } else if (count < min_count) {
+                        bl_tree[curlen].Freq += count;
+                } else if (curlen != 0) {
+                        if (curlen != prevlen)
+                                bl_tree[curlen].Freq++;
+                        bl_tree[REP_3_6].Freq++;
+                } else if (count <= 10) {
+                        bl_tree[REPZ_3_10].Freq++;
+                } else {
+                        bl_tree[REPZ_11_138].Freq++;
+                }
+                count = 0;
+                prevlen = curlen;
+                if (nextlen == 0) {
+                        max_count = 138, min_count = 3;
+                } else if (curlen == nextlen) {
+                        max_count = 6, min_count = 3;
+                } else {
+                        max_count = 7, min_count = 4;
+                }
+        }
+}
+
+/* ===========================================================================
+ * Send a literal or distance tree in compressed form, using the codes in
+ * bl_tree.
+ */
+static void send_tree(ct_data * tree, int max_code)
+{
+        int n;                          /* iterates over all tree elements */
+        int prevlen = -1;       /* last emitted length */
+        int curlen;                     /* length of current code */
+        int nextlen = tree[0].Len;      /* length of next code */
+        int count = 0;          /* repeat count of the current code */
+        int max_count = 7;      /* max repeat count */
+        int min_count = 4;      /* min repeat count */
+
+/* tree[max_code+1].Len = -1; *//* guard already set */
+        if (nextlen == 0)
+                max_count = 138, min_count = 3;
+
+        for (n = 0; n <= max_code; n++) {
+                curlen = nextlen;
+                nextlen = tree[n + 1].Len;
+                if (++count < max_count && curlen == nextlen) {
+                        continue;
+                } else if (count < min_count) {
+                        do {
+                                send_code(curlen, bl_tree);
+                        } while (--count != 0);
+
+                } else if (curlen != 0) {
+                        if (curlen != prevlen) {
+                                send_code(curlen, bl_tree);
+                                count--;
+                        }
+                        Assert(count >= 3 && count <= 6, " 3_6?");
+                        send_code(REP_3_6, bl_tree);
+                        send_bits(count - 3, 2);
+
+                } else if (count <= 10) {
+                        send_code(REPZ_3_10, bl_tree);
+                        send_bits(count - 3, 3);
+
+                } else {
+                        send_code(REPZ_11_138, bl_tree);
+                        send_bits(count - 11, 7);
+                }
+                count = 0;
+                prevlen = curlen;
+                if (nextlen == 0) {
+                        max_count = 138, min_count = 3;
+                } else if (curlen == nextlen) {
+                        max_count = 6, min_count = 3;
+                } else {
+                        max_count = 7, min_count = 4;
+                }
+        }
+}
+
+/* ===========================================================================
+ * Construct the Huffman tree for the bit lengths and return the index in
+ * bl_order of the last bit length code to send.
+ */
+static const int build_bl_tree()
+{
+        int max_blindex;        /* index of last bit length code of non zero freq */
+
+        /* Determine the bit length frequencies for literal and distance trees */
+        scan_tree((ct_data *) dyn_ltree, l_desc.max_code);
+        scan_tree((ct_data *) dyn_dtree, d_desc.max_code);
+
+        /* Build the bit length tree: */
+        build_tree((tree_desc *) (&bl_desc));
+        /* opt_len now includes the length of the tree representations, except
+         * the lengths of the bit lengths codes and the 5+5+4 bits for the counts.
+         */
+
+        /* Determine the number of bit length codes to send. The pkzip format
+         * requires that at least 4 bit length codes be sent. (appnote.txt says
+         * 3 but the actual value used is 4.)
+         */
+        for (max_blindex = BL_CODES - 1; max_blindex >= 3; max_blindex--) {
+                if (bl_tree[bl_order[max_blindex]].Len != 0)
+                        break;
+        }
+        /* Update opt_len to include the bit length tree and counts */
+        opt_len += 3 * (max_blindex + 1) + 5 + 5 + 4;
+        Tracev((stderr, "\ndyn trees: dyn %ld, stat %ld", opt_len, static_len));
+
+        return max_blindex;
+}
+
+/* ===========================================================================
+ * Send the header for a block using dynamic Huffman trees: the counts, the
+ * lengths of the bit length codes, the literal tree and the distance tree.
+ * IN assertion: lcodes >= 257, dcodes >= 1, blcodes >= 4.
+ */
+static void send_all_trees(int lcodes, int dcodes, int blcodes)
+{
+        int rank;                       /* index in bl_order */
+
+        Assert(lcodes >= 257 && dcodes >= 1 && blcodes >= 4, "not enough codes");
+        Assert(lcodes <= L_CODES && dcodes <= D_CODES
+                   && blcodes <= BL_CODES, "too many codes");
+        Tracev((stderr, "\nbl counts: "));
+        send_bits(lcodes - 257, 5);     /* not +255 as stated in appnote.txt */
+        send_bits(dcodes - 1, 5);
+        send_bits(blcodes - 4, 4);      /* not -3 as stated in appnote.txt */
+        for (rank = 0; rank < blcodes; rank++) {
+                Tracev((stderr, "\nbl code %2d ", bl_order[rank]));
+                send_bits(bl_tree[bl_order[rank]].Len, 3);
+        }
+        Tracev((stderr, "\nbl tree: sent %ld", bits_sent));
+
+        send_tree((ct_data *) dyn_ltree, lcodes - 1);   /* send the literal tree */
+        Tracev((stderr, "\nlit tree: sent %ld", bits_sent));
+
+        send_tree((ct_data *) dyn_dtree, dcodes - 1);   /* send the distance tree */
+        Tracev((stderr, "\ndist tree: sent %ld", bits_sent));
+}
+
+/* ===========================================================================
+ * Determine the best encoding for the current block: dynamic trees, static
+ * trees or store, and output the encoded block to the zip file. This function
+ * returns the total compressed length for the file so far.
+ */
+static ulg flush_block(char *buf, ulg stored_len, int eof)
+{
+        ulg opt_lenb, static_lenb;      /* opt_len and static_len in bytes */
+        int max_blindex;        /* index of last bit length code of non zero freq */
+
+        flag_buf[last_flags] = flags;   /* Save the flags for the last 8 items */
+
+        /* Check if the file is ascii or binary */
+        if (*file_type == (ush) UNKNOWN)
+                set_file_type();
+
+        /* Construct the literal and distance trees */
+        build_tree((tree_desc *) (&l_desc));
+        Tracev((stderr, "\nlit data: dyn %ld, stat %ld", opt_len, static_len));
+
+        build_tree((tree_desc *) (&d_desc));
+        Tracev((stderr, "\ndist data: dyn %ld, stat %ld", opt_len, static_len));
+        /* At this point, opt_len and static_len are the total bit lengths of
+         * the compressed block data, excluding the tree representations.
+         */
+
+        /* Build the bit length tree for the above two trees, and get the index
+         * in bl_order of the last bit length code to send.
+         */
+        max_blindex = build_bl_tree();
+
+        /* Determine the best encoding. Compute first the block length in bytes */
+        opt_lenb = (opt_len + 3 + 7) >> 3;
+        static_lenb = (static_len + 3 + 7) >> 3;
+
+        Trace((stderr,
+                   "\nopt %lu(%lu) stat %lu(%lu) stored %lu lit %u dist %u ",
+                   opt_lenb, opt_len, static_lenb, static_len, stored_len,
+                   last_lit, last_dist));
+
+        if (static_lenb <= opt_lenb)
+                opt_lenb = static_lenb;
+
+        /* If compression failed and this is the first and last block,
+         * and if the zip file can be seeked (to rewrite the local header),
+         * the whole file is transformed into a stored file:
+         */
+        if ((just_store || (stored_len <= opt_lenb)) && eof && compressed_len == 0L && seekable()) {
+                /* Since LIT_BUFSIZE <= 2*WSIZE, the input data must be there: */
+                if (buf == (char *) 0)
+                        bb_error_msg("block vanished");
+
+                copy_block(buf, (unsigned) stored_len, 0);      /* without header */
+                compressed_len = stored_len << 3;
+                *file_method = STORED;
+
+        } else if ((just_store || (stored_len + 4 <= opt_lenb)) && buf != (char *) 0) {
+                /* 4: two words for the lengths */
+                /* The test buf != NULL is only necessary if LIT_BUFSIZE > WSIZE.
+                 * Otherwise we can't have processed more than WSIZE input bytes since
+                 * the last block flush, because compression would have been
+                 * successful. If LIT_BUFSIZE <= WSIZE, it is never too late to
+                 * transform a block into a stored block.
+                 */
+                send_bits((STORED_BLOCK << 1) + eof, 3);        /* send block type */
+                compressed_len = (compressed_len + 3 + 7) & ~7L;
+                compressed_len += (stored_len + 4) << 3;
+
+                copy_block(buf, (unsigned) stored_len, 1);      /* with header */
+
+        } else if (static_lenb == opt_lenb) {
+                send_bits((STATIC_TREES << 1) + eof, 3);
+                compress_block((ct_data *) static_ltree, (ct_data *) static_dtree);
+                compressed_len += 3 + static_len;
+        } else {
+                send_bits((DYN_TREES << 1) + eof, 3);
+                send_all_trees(l_desc.max_code + 1, d_desc.max_code + 1,
+                                           max_blindex + 1);
+                compress_block((ct_data *) dyn_ltree, (ct_data *) dyn_dtree);
+                compressed_len += 3 + opt_len;
+        }
+        Assert(compressed_len == bits_sent, "bad compressed size");
+        init_block();
+
+        if (eof) {
+                bi_windup();
+                compressed_len += 7;    /* align on byte boundary */
+        }
+        Tracev((stderr, "\ncomprlen %lu(%lu) ", compressed_len >> 3,
+                        compressed_len - 7 * eof));
+
+        return compressed_len >> 3;
+}
+
+/* ===========================================================================
+ * Save the match info and tally the frequency counts. Return true if
+ * the current block must be flushed.
+ */
+static int ct_tally(int dist, int lc)
+{
+        l_buf[last_lit++] = (uch) lc;
+        if (dist == 0) {
+                /* lc is the unmatched char */
+                dyn_ltree[lc].Freq++;
+        } else {
+                /* Here, lc is the match length - MIN_MATCH */
+                dist--;                 /* dist = match distance - 1 */
+                Assert((ush) dist < (ush) MAX_DIST &&
+                           (ush) lc <= (ush) (MAX_MATCH - MIN_MATCH) &&
+                           (ush) d_code(dist) < (ush) D_CODES, "ct_tally: bad match");
+
+                dyn_ltree[length_code[lc] + LITERALS + 1].Freq++;
+                dyn_dtree[d_code(dist)].Freq++;
+
+                d_buf[last_dist++] = (ush) dist;
+                flags |= flag_bit;
+        }
+        flag_bit <<= 1;
+
+        /* Output the flags if they fill a byte: */
+        if ((last_lit & 7) == 0) {
+                flag_buf[last_flags++] = flags;
+                flags = 0, flag_bit = 1;
+        }
+        /* Try to guess if it is profitable to stop the current block here */
+        if ((last_lit & 0xfff) == 0) {
+                /* Compute an upper bound for the compressed length */
+                ulg out_length = (ulg) last_lit * 8L;
+                ulg in_length = (ulg) strstart - block_start;
+                int dcode;
+
+                for (dcode = 0; dcode < D_CODES; dcode++) {
+                        out_length +=
+                                (ulg) dyn_dtree[dcode].Freq * (5L + extra_dbits[dcode]);
+                }
+                out_length >>= 3;
+                Trace((stderr,
+                           "\nlast_lit %u, last_dist %u, in %ld, out ~%ld(%ld%%) ",
+                           last_lit, last_dist, in_length, out_length,
+                           100L - out_length * 100L / in_length));
+                if (last_dist < last_lit / 2 && out_length < in_length / 2)
+                        return 1;
+        }
+        return (last_lit == LIT_BUFSIZE - 1 || last_dist == DIST_BUFSIZE);
+        /* We avoid equality with LIT_BUFSIZE because of wraparound at 64K
+         * on 16 bit machines and because stored blocks are restricted to
+         * 64K-1 bytes.
+         */
+}
+
+/* ===========================================================================
+ * Send the block data compressed using the given Huffman trees
+ */
+static void compress_block(ct_data * ltree, ct_data * dtree)
+{
+        unsigned dist;          /* distance of matched string */
+        int lc;                         /* match length or unmatched char (if dist == 0) */
+        unsigned lx = 0;        /* running index in l_buf */
+        unsigned dx = 0;        /* running index in d_buf */
+        unsigned fx = 0;        /* running index in flag_buf */
+        uch flag = 0;           /* current flags */
+        unsigned code;          /* the code to send */
+        int extra;                      /* number of extra bits to send */
+
+        if (last_lit != 0)
+                do {
+                        if ((lx & 7) == 0)
+                                flag = flag_buf[fx++];
+                        lc = l_buf[lx++];
+                        if ((flag & 1) == 0) {
+                                send_code(lc, ltree);   /* send a literal byte */
+                                Tracecv(isgraph(lc), (stderr, " '%c' ", lc));
+                        } else {
+                                /* Here, lc is the match length - MIN_MATCH */
+                                code = length_code[lc];
+                                send_code(code + LITERALS + 1, ltree);  /* send the length code */
+                                extra = extra_lbits[code];
+                                if (extra != 0) {
+                                        lc -= base_length[code];
+                                        send_bits(lc, extra);   /* send the extra length bits */
+                                }
+                                dist = d_buf[dx++];
+                                /* Here, dist is the match distance - 1 */
+                                code = d_code(dist);
+                                Assert(code < D_CODES, "bad d_code");
+
+                                send_code(code, dtree); /* send the distance code */
+                                extra = extra_dbits[code];
+                                if (extra != 0) {
+                                        dist -= base_dist[code];
+                                        send_bits(dist, extra); /* send the extra distance bits */
+                                }
+                        }                       /* literal or match pair ? */
+                        flag >>= 1;
+                } while (lx < last_lit);
+
+        send_code(END_BLOCK, ltree);
+}
+
+/* ===========================================================================
+ * Set the file type to ASCII or BINARY, using a crude approximation:
+ * binary if more than 20% of the bytes are <= 6 or >= 128, ascii otherwise.
+ * IN assertion: the fields freq of dyn_ltree are set and the total of all
+ * frequencies does not exceed 64K (to fit in an int on 16 bit machines).
+ */
+static void set_file_type()
+{
+        int n = 0;
+        unsigned ascii_freq = 0;
+        unsigned bin_freq = 0;
+
+        while (n < 7)
+                bin_freq += dyn_ltree[n++].Freq;
+        while (n < 128)
+                ascii_freq += dyn_ltree[n++].Freq;
+        while (n < LITERALS)
+                bin_freq += dyn_ltree[n++].Freq;
+        *file_type = bin_freq > (ascii_freq >> 2) ? BINARY : ASCII;
+        if (*file_type == BINARY && translate_eol) {
+                bb_error_msg("-l used on binary file");
+        }
+}
+
+/* zip.c -- compress files to the gzip or pkzip format
+ * Copyright (C) 1992-1993 Jean-loup Gailly
+ * This is free software; you can redistribute it and/or modify it under the
+ * terms of the GNU General Public License, see the file COPYING.
+ */
+
+
+static ulg crc;                 /* crc on uncompressed file data */
+static long header_bytes;       /* number of bytes in gzip header */
+
+static void put_long(ulg n)
+{
+        put_short((n) & 0xffff);
+        put_short(((ulg) (n)) >> 16);
+}
+
+/* put_header_byte is used for the compressed output
+ * - for the initial 4 bytes that can't overflow the buffer.
+ */
+#define put_header_byte(c) {outbuf[outcnt++]=(uch)(c);}
+
+/* ===========================================================================
+ * Deflate in to out.
+ * IN assertions: the input and output buffers are cleared.
+ *   The variables time_stamp and save_orig_name are initialized.
+ */
+static int zip(int in, int out)
+{
+        uch my_flags = 0;       /* general purpose bit flags */
+        ush attr = 0;           /* ascii/binary flag */
+        ush deflate_flags = 0;  /* pkzip -es, -en or -ex equivalent */
+
+        ifd = in;
+        ofd = out;
+        outcnt = 0;
+
+        /* Write the header to the gzip file. See algorithm.doc for the format */
+
+
+        method = DEFLATED;
+        put_header_byte(GZIP_MAGIC[0]); /* magic header */
+        put_header_byte(GZIP_MAGIC[1]);
+        put_header_byte(DEFLATED);      /* compression method */
+
+        put_header_byte(my_flags);      /* general flags */
+        put_long(time_stamp);
+
+        /* Write deflated file to zip file */
+        crc = updcrc(0, 0);
+
+        bi_init(out);
+        ct_init(&attr, &method);
+        lm_init(&deflate_flags);
+
+        put_byte((uch) deflate_flags);  /* extra flags */
+        put_byte(OS_CODE);      /* OS identifier */
+
+        header_bytes = (long) outcnt;
+
+        (void) deflate();
+
+        /* Write the crc and uncompressed size */
+        put_long(crc);
+        put_long(isize);
+        header_bytes += 2 * sizeof(long);
+
+        flush_outbuf();
+        return OK;
+}
+
+
+/* ===========================================================================
+ * Read a new buffer from the current input file, perform end-of-line
+ * translation, and update the crc and input file size.
+ * IN assertion: size >= 2 (for end-of-line translation)
+ */
+static int file_read(char *buf, unsigned size)
+{
+        unsigned len;
+
+        Assert(insize == 0, "inbuf not empty");
+
+        len = read(ifd, buf, size);
+        if (len == (unsigned) (-1) || len == 0)
+                return (int) len;
+
+        crc = updcrc((uch *) buf, len);
+        isize += (ulg) len;
+        return (int) len;
+}
+
+/* ===========================================================================
+ * Write the output buffer outbuf[0..outcnt-1] and update bytes_out.
+ * (used for the compressed data only)
+ */
+static void flush_outbuf()
+{
+        if (outcnt == 0)
+                return;
+
+        write_buf(ofd, (char *) outbuf, outcnt);
+        outcnt = 0;
+}
diff --git a/urunlevel/include/applets.h b/urunlevel/include/applets.h
new file mode 100644
index 0000000..27fe124
--- /dev/null
+++ b/urunlevel/include/applets.h
@@ -0,0 +1,752 @@
+/*
+ * applets.h - a listing of all busybox applets.
+ *
+ * If you write a new applet, you need to add an entry to this list to make
+ * busybox aware of it.
+ *
+ * It is CRUCIAL that this listing be kept in ascii order, otherwise the binary
+ * search lookup contributed by Gaute B Strokkenes stops working. If you value
+ * your kneecaps, you'll be sure to *make sure* that any changes made to this
+ * file result in the listing remaining in ascii order. You have been warned.
+ */
+
+#undef APPLET
+#undef APPLET_ODDNAME
+#undef APPLET_NOUSAGE
+
+
+#if defined(PROTOTYPES)
+  #define APPLET(a,b,c,d) extern int b(int argc, char **argv);
+  #define APPLET_NOUSAGE(a,b,c,d) extern int b(int argc, char **argv);
+  #define APPLET_ODDNAME(a,b,c,d,e) extern int b(int argc, char **argv);
+  extern const char usage_messages[];
+#elif defined(MAKE_USAGE)
+  #ifdef CONFIG_FEATURE_VERBOSE_USAGE
+    #define APPLET(a,b,c,d) a##_trivial_usage "\n\n" a##_full_usage "\0"
+    #define APPLET_NOUSAGE(a,b,c,d) "\b\0"
+    #define APPLET_ODDNAME(a,b,c,d,e) e##_trivial_usage "\n\n" e##_full_usage "\0"
+  #else
+    #define APPLET(a,b,c,d) a##_trivial_usage "\0"
+    #define APPLET_NOUSAGE(a,b,c,d) "\b\0"
+    #define APPLET_ODDNAME(a,b,c,d,e) e##_trivial_usage "\0"
+  #endif
+#elif defined(MAKE_LINKS)
+#  define APPLET(a,b,c,d) LINK c a
+#  define APPLET_NOUSAGE(a,b,c,d) LINK c a
+#  define APPLET_ODDNAME(a,b,c,d,e) LINK c a
+#else
+  const struct BB_applet applets[] = {
+  #define APPLET(a,b,c,d) {#a,b,c,d},
+  #define APPLET_NOUSAGE(a,b,c,d) {a,b,c,d},
+  #define APPLET_ODDNAME(a,b,c,d,e) {a,b,c,d},
+#endif
+
+#ifdef CONFIG_INSTALL_NO_USR
+#define _BB_DIR_USR_BIN _BB_DIR_BIN
+#define _BB_DIR_USR_SBIN _BB_DIR_SBIN
+#endif
+
+
+
+#ifdef CONFIG_TEST
+        APPLET_NOUSAGE("[", test_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_ADDGROUP
+        APPLET(addgroup, addgroup_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_ADDUSER
+        APPLET(adduser, adduser_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_ADJTIMEX
+        APPLET(adjtimex, adjtimex_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_AR
+        APPLET(ar, ar_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_ARPING
+        APPLET(arping, arping_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_ASH
+        APPLET_NOUSAGE("ash", ash_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_AWK
+        APPLET(awk, awk_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_BASENAME
+        APPLET(basename, basename_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_BOOT_NAMED
+        APPLET(boot_named, boot_named_main, _BB_DIR_USR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_BOOT_PORTMAP
+        APPLET(boot_portmap, boot_portmap_main, _BB_DIR_USR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_BOOT_SYSLOG
+        APPLET(boot_syslog, boot_syslog_main, _BB_DIR_USR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_BOOT_TIME
+        APPLET(boot_time, boot_time_main, _BB_DIR_USR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_BUNZIP2
+        APPLET(bunzip2, bunzip2_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+        APPLET_NOUSAGE("busybox", busybox_main, _BB_DIR_BIN, _BB_SUID_MAYBE)
+#ifdef CONFIG_BUNZIP2
+        APPLET(bzcat, bunzip2_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_CAL
+        APPLET(cal, cal_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_CAT
+        APPLET(cat, cat_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_CHGRP
+        APPLET(chgrp, chgrp_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_CHMOD
+        APPLET(chmod, chmod_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_CHOWN
+        APPLET(chown, chown_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_CHROOT
+        APPLET(chroot, chroot_main, _BB_DIR_USR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_CHVT
+        APPLET(chvt, chvt_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_CLEAR
+        APPLET(clear, clear_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_CMP
+        APPLET(cmp, cmp_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_CP
+        APPLET(cp, cp_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_CPIO
+        APPLET(cpio, cpio_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_CROND
+        APPLET(crond, crond_main, _BB_DIR_USR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_CRONTAB
+        APPLET(crontab, crontab_main, _BB_DIR_USR_BIN, _BB_SUID_ALWAYS)
+#endif
+#ifdef CONFIG_CUT
+        APPLET(cut, cut_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_DATE
+        APPLET(date, date_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_DC
+        APPLET(dc, dc_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_DD
+        APPLET(dd, dd_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_DEALLOCVT
+        APPLET(deallocvt, deallocvt_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_DELGROUP
+        APPLET(delgroup, delgroup_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_DELUSER
+        APPLET(deluser, deluser_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_DEVFSD
+        APPLET(devfsd, devfsd_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_DF
+        APPLET(df, df_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_DIRNAME
+        APPLET(dirname, dirname_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_DMESG
+        APPLET(dmesg, dmesg_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_DOS2UNIX
+        APPLET(dos2unix, dos2unix_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_DPKG
+        APPLET(dpkg, dpkg_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_DPKG_DEB
+        APPLET_ODDNAME("dpkg-deb", dpkg_deb_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER, dpkg_deb)
+#endif
+#ifdef CONFIG_DU
+        APPLET(du, du_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_DUMPKMAP
+        APPLET(dumpkmap, dumpkmap_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_DUMPLEASES
+        APPLET(dumpleases, dumpleases_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_ECHO
+        APPLET(echo, echo_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#if defined(CONFIG_FEATURE_GREP_EGREP_ALIAS)
+        APPLET_NOUSAGE("egrep", grep_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_ENV
+        APPLET(env, env_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_EXPR
+        APPLET(expr, expr_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_FALSE
+        APPLET(false, false_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_FBSET
+        APPLET(fbset, fbset_main, _BB_DIR_USR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_FDFLUSH
+        APPLET(fdflush, fdflush_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_FDFORMAT
+        APPLET(fdformat, fdformat_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_FDISK
+        APPLET(fdisk, fdisk_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#if defined(CONFIG_FEATURE_GREP_FGREP_ALIAS)
+        APPLET_NOUSAGE("fgrep", grep_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_FIND
+        APPLET(find, find_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_FOLD
+        APPLET(fold, fold_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_FREE
+        APPLET(free, free_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_FREERAMDISK
+        APPLET(freeramdisk, freeramdisk_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_FSCK_MINIX
+        APPLET_ODDNAME("fsck.minix", fsck_minix_main, _BB_DIR_SBIN, _BB_SUID_NEVER, fsck_minix)
+#endif
+#ifdef CONFIG_FTPGET
+        APPLET(ftpget, ftpgetput_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_FTPPUT
+        APPLET(ftpput, ftpgetput_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_GETOPT
+        APPLET(getopt, getopt_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_GETPKG
+        APPLET(getpkg, getpkg_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_GETTY
+        APPLET(getty, getty_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_GREP
+        APPLET(grep, grep_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_GUNZIP
+        APPLET(gunzip, gunzip_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_GZIP
+        APPLET(gzip, gzip_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_HALT
+        APPLET(halt, halt_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_HDPARM
+        APPLET(hdparm, hdparm_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_HEAD
+        APPLET(head, head_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_HEXDUMP
+        APPLET(hexdump, hexdump_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_HOSTID
+        APPLET(hostid, hostid_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_HOSTNAME
+        APPLET(hostname, hostname_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_HTTPD
+        APPLET(httpd, httpd_main, _BB_DIR_USR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_HUSH
+        APPLET_NOUSAGE("hush", hush_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_HWCLOCK
+        APPLET(hwclock, hwclock_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_ID
+        APPLET(id, id_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_IFCONFIG
+        APPLET(ifconfig, ifconfig_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_IFUPDOWN
+        APPLET(ifdown, ifupdown_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_IFUPDOWN
+        APPLET(ifup, ifupdown_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_INETD
+        APPLET(inetd, inetd_main, _BB_DIR_USR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_INIT
+        APPLET(init, init_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_INSMOD
+        APPLET(insmod, insmod_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_INSTALL
+        APPLET(install, install_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_INSTALL_INITD
+        APPLET(install_initd, install_initd_main, _BB_DIR_USR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_IP
+        APPLET(ip, ip_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_IPADDR
+        APPLET(ipaddr, ipaddr_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_IPCALC
+        APPLET(ipcalc, ipcalc_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_IPLINK
+        APPLET(iplink, iplink_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_IPROUTE
+        APPLET(iproute, iproute_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_IPTUNNEL
+        APPLET(iptunnel, iptunnel_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_KILL
+        APPLET(kill, kill_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_KILLALL
+        APPLET(killall, kill_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_KILLPROC
+        APPLET(killproc, killproc_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_KLOGD
+        APPLET(klogd, klogd_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_LASH
+        APPLET(lash, lash_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_LAST
+        APPLET(last, last_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_LENGTH
+        APPLET(length, length_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_FEATURE_INITRD
+        APPLET_NOUSAGE("linuxrc", init_main, _BB_DIR_ROOT, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_LINUXRC
+        APPLET(linuxrc, linuxrc_main, _BB_DIR_ROOT, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_LN
+        APPLET(ln, ln_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_LOADFONT
+        APPLET(loadfont, loadfont_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_LOADKMAP
+        APPLET(loadkmap, loadkmap_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_LOCAL_FS
+        APPLET(local_fs, local_fs_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_LOG_FAILURE_MSG
+        APPLET(log_failure_msg, log_failure_msg_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_LOG_SUCCESS_MSG
+        APPLET(log_success_msg, log_success_msg_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_LOG_WARNING_MSG
+        APPLET(log_warning_msg, log_warning_msg_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_LOGGER
+        APPLET(logger, logger_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_LOGIN
+        APPLET(login, login_main, _BB_DIR_BIN, _BB_SUID_ALWAYS)
+#endif
+#ifdef CONFIG_LOGNAME
+        APPLET(logname, logname_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_LOGREAD
+        APPLET(logread, logread_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_LOSETUP
+        APPLET(losetup, losetup_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_LS
+        APPLET(ls, ls_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_LSMOD
+        APPLET(lsmod, lsmod_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_MAKEDEVS
+        APPLET(makedevs, makedevs_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_MAN
+        APPLET(man, man_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_MD5SUM
+        APPLET(md5sum, md5sum_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_MESG
+        APPLET(mesg, mesg_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_MKDIR
+        APPLET(mkdir, mkdir_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_MKFIFO
+        APPLET(mkfifo, mkfifo_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_MKFS_MINIX
+        APPLET_ODDNAME("mkfs.minix", mkfs_minix_main, _BB_DIR_SBIN, _BB_SUID_NEVER, mkfs_minix)
+#endif
+#ifdef CONFIG_MKNOD
+        APPLET(mknod, mknod_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_MKSWAP
+        APPLET(mkswap, mkswap_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_MKTEMP
+        APPLET(mktemp, mktemp_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_MODPROBE
+        APPLET(modprobe, modprobe_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_MORE
+        APPLET(more, more_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_MOUNT
+        APPLET(mount, mount_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_MSH
+        APPLET_NOUSAGE("msh", msh_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_MT
+        APPLET(mt, mt_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_MV
+        APPLET(mv, mv_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_NAMEIF
+        APPLET(nameif, nameif_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_NC
+        APPLET(nc, nc_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_NETSTAT
+        APPLET(netstat, netstat_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_NETWORK
+        APPLET(network, network_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_NSLOOKUP
+        APPLET(nslookup, nslookup_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_OD
+        APPLET(od, od_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_OPENVT
+        APPLET(openvt, openvt_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_PASSWD
+        APPLET(passwd, passwd_main, _BB_DIR_USR_BIN, _BB_SUID_ALWAYS)
+#endif
+#ifdef CONFIG_PATCH
+        APPLET(patch, patch_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_PIDOF
+        APPLET(pidof, pidof_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_PIDOFPROC
+        APPLET(pidofproc, pidofproc_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_PING
+        APPLET(ping, ping_main, _BB_DIR_BIN, _BB_SUID_MAYBE)
+#endif
+#ifdef CONFIG_PING6
+        APPLET(ping6, ping6_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_PIPE_PROGRESS
+        APPLET_NOUSAGE("pipe_progress", pipe_progress_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_PIVOT_ROOT
+        APPLET(pivot_root, pivot_root_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_POWEROFF
+        APPLET(poweroff, poweroff_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_PRINTF
+        APPLET(printf, printf_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_PS
+        APPLET(ps, ps_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_PWD
+        APPLET(pwd, pwd_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_RC
+        APPLET(rc, rc_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_RCS
+        APPLET(rcS, rcS_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_RDATE
+        APPLET(rdate, rdate_main, _BB_DIR_USR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_READLINK
+        APPLET(readlink, readlink_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_REALPATH
+        APPLET(realpath, realpath_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_REBOOT
+        APPLET(reboot, reboot_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_REMOTE_FS
+        APPLET(remote_fs, remote_fs_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_REMOVE_INITD
+        APPLET(remove_initd, remove_initd_main, _BB_DIR_USR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_RENICE
+        APPLET(renice, renice_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_RESET
+        APPLET(reset, reset_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_RM
+        APPLET(rm, rm_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_RMDIR
+        APPLET(rmdir, rmdir_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_RMMOD
+        APPLET(rmmod, rmmod_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_ROUTE
+        APPLET(route, route_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_RPM
+        APPLET(rpm, rpm_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_RPM2CPIO
+        APPLET(rpm2cpio, rpm2cpio_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_RUN_PARTS
+        APPLET_ODDNAME("run-parts", run_parts_main, _BB_DIR_BIN, _BB_SUID_NEVER, run_parts)
+#endif
+#ifdef CONFIG_RX
+        APPLET(rx, rx_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_SED
+        APPLET(sed, sed_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_SEQ
+        APPLET(seq, seq_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_SETKEYCODES
+        APPLET(setkeycodes, setkeycodes_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#if defined(CONFIG_FEATURE_SH_IS_ASH) && defined(CONFIG_ASH)
+        APPLET_NOUSAGE("sh", ash_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#elif defined(CONFIG_FEATURE_SH_IS_HUSH) && defined(CONFIG_HUSH)
+        APPLET_NOUSAGE("sh", hush_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#elif defined(CONFIG_FEATURE_SH_IS_LASH) && defined(CONFIG_LASH)
+        APPLET_NOUSAGE("sh", lash_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#elif defined(CONFIG_FEATURE_SH_IS_MSH) && defined(CONFIG_MSH)
+        APPLET_NOUSAGE("sh", msh_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_SHA1SUM
+        APPLET(sha1sum, sha1sum_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_SLEEP
+        APPLET(sleep, sleep_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_SORT
+        APPLET(sort, sort_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_START_STOP_DAEMON
+    APPLET_ODDNAME("start-stop-daemon", start_stop_daemon_main, _BB_DIR_SBIN, _BB_SUID_NEVER, start_stop_daemon)
+#endif
+#ifdef CONFIG_START_DAEMON
+        APPLET(start_daemon, start_daemon_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_STRINGS
+        APPLET(strings, strings_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_STTY
+        APPLET(stty, stty_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_SU
+        APPLET(su, su_main, _BB_DIR_BIN, _BB_SUID_ALWAYS)
+#endif
+#ifdef CONFIG_SULOGIN
+        APPLET(sulogin, sulogin_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_SWAPONOFF
+        APPLET(swapoff, swap_on_off_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_SWAPONOFF
+        APPLET(swapon, swap_on_off_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_SYNC
+        APPLET(sync, sync_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_SYSCTL
+        APPLET(sysctl, sysctl_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_SYSLOGD
+        APPLET(syslogd, syslogd_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_TAIL
+        APPLET(tail, tail_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_TAR
+        APPLET(tar, tar_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_TEE
+        APPLET(tee, tee_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_TELNET
+        APPLET(telnet, telnet_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_TELNETD
+        APPLET(telnetd, telnetd_main, _BB_DIR_USR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_TEST
+        APPLET(test, test_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_TFTP
+        APPLET(tftp, tftp_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_TIME
+        APPLET(time, time_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_TOP
+        APPLET(top, top_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_TOUCH
+        APPLET(touch, touch_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_TR
+        APPLET(tr, tr_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_TRACEROUTE
+        APPLET(traceroute, traceroute_main, _BB_DIR_USR_BIN, _BB_SUID_MAYBE)
+#endif
+#ifdef CONFIG_TRUE
+        APPLET(true, true_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_TTY
+        APPLET(tty, tty_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_UDHCPC
+        APPLET(udhcpc, udhcpc_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_UDHCPC_SCRIPT
+        APPLET(udhcpc_script, udhcpc_script_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_UDHCPD
+        APPLET(udhcpd, udhcpd_main, _BB_DIR_USR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_UMOUNT
+        APPLET(umount, umount_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_UNAME
+        APPLET(uname, uname_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_UNCOMPRESS
+        APPLET(uncompress, uncompress_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_UNIQ
+        APPLET(uniq, uniq_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_UNIX2DOS
+        APPLET(unix2dos, dos2unix_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_UNZIP
+        APPLET(unzip, unzip_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_UPTIME
+        APPLET(uptime, uptime_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_USLEEP
+        APPLET(usleep, usleep_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_UUDECODE
+        APPLET(uudecode, uudecode_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_UUENCODE
+        APPLET(uuencode, uuencode_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_VCONFIG
+        APPLET(vconfig, vconfig_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_VI
+        APPLET(vi, vi_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_VLOCK
+        APPLET(vlock, vlock_main, _BB_DIR_USR_BIN, _BB_SUID_ALWAYS)
+#endif
+#ifdef CONFIG_WATCH
+        APPLET(watch, watch_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_WATCHDOG
+        APPLET(watchdog, watchdog_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_WC
+        APPLET(wc, wc_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_WGET
+        APPLET(wget, wget_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_WHICH
+        APPLET(which, which_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_WHO
+        APPLET(who, who_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_WHOAMI
+        APPLET(whoami, whoami_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_XARGS
+        APPLET(xargs, xargs_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_YES
+        APPLET(yes, yes_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
+#endif
+#ifdef CONFIG_GUNZIP
+        APPLET(zcat, gunzip_main, _BB_DIR_BIN, _BB_SUID_NEVER)
+#endif
+
+#if !defined(PROTOTYPES) && !defined(MAKE_USAGE)
+        { 0,NULL,0 }
+};
+
+#endif
+
+
+
+
+
+
+
+
+
+
+
diff --git a/urunlevel/include/usage.h b/urunlevel/include/usage.h
new file mode 100644
index 0000000..c18bb20
--- /dev/null
+++ b/urunlevel/include/usage.h
@@ -0,0 +1,3077 @@
+#ifndef __BB_USAGE_H__
+#define __BB_USAGE_H__
+
+#define addgroup_trivial_usage \
+        "[-g GID] group_name [user_name]"
+#define addgroup_full_usage \
+        "Adds a group to the system\n\n" \
+        "Options:\n" \
+        "\t-g GID\t\tspecify gid"
+
+#define adduser_trivial_usage \
+        "[OPTIONS] user_name"
+#define adduser_full_usage \
+        "Adds a user to the system\n\n" \
+        "Options:\n" \
+        "\t-h DIR\t\tAssign home directory DIR\n" \
+        "\t-g GECOS\tAssign gecos field GECOS\n" \
+        "\t-s SHELL\tAssign login shell SHELL\n" \
+        "\t-G\t\tAdd the user to existing group GROUP\n" \
+        "\t-S\t\tcreate a system user (ignored)\n" \
+        "\t-D\t\tDo not assign a password (logins still possible via ssh)\n" \
+        "\t-H\t\tDo not create the home directory"
+
+#define adjtimex_trivial_usage \
+        "[-q] [-o offset] [-f frequency] [-p timeconstant] [-t tick]"
+#define adjtimex_full_usage \
+        "Reads and optionally sets system timebase parameters.\n" \
+        "See adjtimex(2).\n\n" \
+        "Options:\n" \
+        "\t-q\t\tquiet mode - do not print\n" \
+        "\t-o offset\ttime offset, microseconds\n" \
+        "\t-f frequency\tfrequency adjust, integer kernel units (65536 is 1ppm)\n" \
+        "\t\t\t(positive values make the system clock run fast)\n" \
+        "\t-t tick\t\tmicroseconds per tick, usually 10000\n" \
+        "\t-p timeconstant"
+
+#define ar_trivial_usage \
+        "[-o] [-v] [-p] [-t] [-x] ARCHIVE FILES"
+#define ar_full_usage \
+        "Extract or list FILES from an ar archive.\n\n" \
+        "Options:\n" \
+        "\t-o\t\tpreserve original dates\n" \
+        "\t-p\t\textract to stdout\n" \
+        "\t-t\t\tlist\n" \
+        "\t-x\t\textract\n" \
+        "\t-v\t\tverbosely list files processed"
+
+#define arping_trivial_usage \
+        "[-fqbDUA] [-c count] [-w timeout] [-I device] [-s sender] target\n"
+#define arping_full_usage \
+        "Ping hosts by ARP requests/replies.\n\n" \
+        "Options:\n" \
+        "\t-f\t\tQuit on first ARP reply\n" \
+        "\t-q\t\tBe quiet\n" \
+        "\t-b\t\tKeep broadcasting, don't go unicast\n" \
+        "\t-D\t\tDuplicated address detection mode\n" \
+        "\t-U\t\tUnsolicited ARP mode, update your neighbours\n" \
+        "\t-A\t\tARP answer mode, update your neighbours\n" \
+        "\t-c count\tStop after sending count ARP request packets\n" \
+        "\t-w timeout\tTime to wait for ARP reply, in seconds\n" \
+        "\t-I device\tOutgoing interface name, default is eth0\n" \
+        "\t-s sender\tSet specific sender IP address\n" \
+        "\ttarget\t\tTarget IP address of ARP request"
+
+#define ash_trivial_usage \
+        "[FILE]...\n" \
+        "or: ash -c command [args]...\n"
+#define ash_full_usage \
+        "The ash shell (command interpreter)"
+
+#define awk_trivial_usage \
+        "[OPTION]... [program-text] [FILE ...]"
+#define awk_full_usage \
+        "Options:\n" \
+        "\t-v var=val\t\tassign value 'val' to variable 'var'\n" \
+        "\t-F sep\t\tuse 'sep' as field separator\n" \
+        "\t-f progname\t\tread program source from file 'progname'"
+
+#define basename_trivial_usage \
+        "FILE [SUFFIX]"
+#define basename_full_usage \
+        "Strips directory path and suffixes from FILE.\n" \
+        "If specified, also removes any trailing SUFFIX."
+#define basename_example_usage \
+        "$ basename /usr/local/bin/foo\n" \
+        "foo\n" \
+        "$ basename /usr/local/bin/\n" \
+        "bin\n" \
+        "$ basename /foo/bar.txt .txt\n" \
+        "bar"
+
+
+#define boot_named_trivial_usage \
+        ""
+#define boot_named_full_usage \
+        "LSB boot_named init system."
+#define boot_named_example_usage \
+        "$ boot_named start\n"
+
+
+#define boot_portmap_trivial_usage \
+        ""
+#define boot_portmap_full_usage \
+        "LSB boot_portmap init system."
+#define boot_portmap_example_usage \
+        "$ boot_portmap start\n"
+
+
+#define boot_syslog_trivial_usage \
+        ""
+#define boot_syslog_full_usage \
+        "LSB boot_syslog init system."
+#define boot_syslog_example_usage \
+        "$ boot_syslog start\n"
+
+
+#define boot_time_trivial_usage \
+        ""
+#define boot_time_full_usage \
+        "LSB boot_time init system."
+#define boot_time_example_usage \
+        "$ boot_time start\n"
+
+
+#define bunzip2_trivial_usage \
+        "[OPTION]... [FILE]"
+#define bunzip2_full_usage \
+        "Uncompress FILE (or standard input if FILE is '-' or omitted).\n\n" \
+        "Options:\n" \
+        "\t-c\tWrite output to standard output\n" \
+        "\t-f\tForce"
+
+#define bzcat_trivial_usage \
+        "FILE"
+#define bzcat_full_usage \
+        "Uncompress to stdout."
+
+#define cal_trivial_usage \
+       "[-jy] [[month] year]"
+#define cal_full_usage \
+       "Display a calendar.\n" \
+       "\nOptions:\n" \
+       "\t-j\tUse julian dates.\n" \
+       "\t-y\tDisplay the entire year."
+
+#define cat_trivial_usage \
+        "[-u] [FILE]..."
+#define cat_full_usage \
+        "Concatenates FILE(s) and prints them to stdout.\n\n" \
+        "Options:\n" \
+        "\t-u\tignored since unbuffered i/o is always used"
+#define cat_example_usage \
+        "$ cat /proc/uptime\n" \
+        "110716.72 17.67"
+
+#define chgrp_trivial_usage \
+        "[OPTION]... GROUP FILE..."
+#define chgrp_full_usage \
+        "Change the group membership of each FILE to GROUP.\n" \
+        "\nOptions:\n" \
+        "\t-R\tChanges files and directories recursively."
+#define chgrp_example_usage \
+        "$ ls -l /tmp/foo\n" \
+        "-r--r--r--    1 andersen andersen        0 Apr 12 18:25 /tmp/foo\n" \
+        "$ chgrp root /tmp/foo\n" \
+        "$ ls -l /tmp/foo\n" \
+        "-r--r--r--    1 andersen root            0 Apr 12 18:25 /tmp/foo\n"
+
+#define chmod_trivial_usage \
+        "[-R] MODE[,MODE]... FILE..."
+#define chmod_full_usage \
+        "Each MODE is one or more of the letters ugoa, one of the\n" \
+        "symbols +-= and one or more of the letters rwxst.\n\n" \
+        "Options:\n" \
+        "\t-R\tChanges files and directories recursively."
+#define chmod_example_usage \
+        "$ ls -l /tmp/foo\n" \
+        "-rw-rw-r--    1 root     root            0 Apr 12 18:25 /tmp/foo\n" \
+        "$ chmod u+x /tmp/foo\n" \
+        "$ ls -l /tmp/foo\n" \
+        "-rwxrw-r--    1 root     root            0 Apr 12 18:25 /tmp/foo*\n" \
+        "$ chmod 444 /tmp/foo\n" \
+        "$ ls -l /tmp/foo\n" \
+        "-r--r--r--    1 root     root            0 Apr 12 18:25 /tmp/foo\n"
+
+#define chown_trivial_usage \
+        "[ -Rh ]...  OWNER[<.|:>[GROUP]] FILE..."
+#define chown_full_usage \
+        "Change the owner and/or group of each FILE to OWNER and/or GROUP.\n" \
+        "\nOptions:\n" \
+        "\t-R\tChanges files and directories recursively.\n" \
+        "\t-h\tDo not dereference symbolic links."
+#define chown_example_usage \
+        "$ ls -l /tmp/foo\n" \
+        "-r--r--r--    1 andersen andersen        0 Apr 12 18:25 /tmp/foo\n" \
+        "$ chown root /tmp/foo\n" \
+        "$ ls -l /tmp/foo\n" \
+        "-r--r--r--    1 root     andersen        0 Apr 12 18:25 /tmp/foo\n" \
+        "$ chown root.root /tmp/foo\n" \
+        "ls -l /tmp/foo\n" \
+        "-r--r--r--    1 root     root            0 Apr 12 18:25 /tmp/foo\n"
+
+#define chroot_trivial_usage \
+        "NEWROOT [COMMAND...]"
+#define chroot_full_usage \
+        "Run COMMAND with root directory set to NEWROOT."
+#define chroot_example_usage \
+        "$ ls -l /bin/ls\n" \
+        "lrwxrwxrwx    1 root     root          12 Apr 13 00:46 /bin/ls -> /BusyBox\n" \
+        "# mount /dev/hdc1 /mnt -t minix\n" \
+        "# chroot /mnt\n" \
+        "# ls -l /bin/ls\n" \
+        "-rwxr-xr-x    1 root     root        40816 Feb  5 07:45 /bin/ls*\n"
+
+#define chvt_trivial_usage \
+        "N"
+#define chvt_full_usage \
+        "Changes the foreground virtual terminal to /dev/ttyN"
+
+#define clear_trivial_usage \
+        ""
+#define clear_full_usage \
+        "Clear screen."
+
+#define cmp_trivial_usage \
+        "[-l] [-s] FILE1 [FILE2]"
+#define cmp_full_usage \
+        "Compare files.  Compares FILE1 vs stdin if FILE2 is not specified.\n\n" \
+        "Options:\n" \
+        "\t-l\tWrite the byte numbers (decimal) and values (octal)\n" \
+        "\t\t  for all differing bytes.\n" \
+        "\t-s\tquiet mode - do not print"
+
+#define cp_trivial_usage \
+        "[OPTION]... SOURCE DEST"
+#define cp_full_usage \
+        "Copies SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY.\n" \
+        "\n" \
+        "\t-a\tSame as -dpR\n" \
+        "\t-d\tPreserves links\n" \
+        "\t-p\tPreserves file attributes if possible\n" \
+        "\t-f\tforce (implied; ignored) - always set\n" \
+        "\t-i\tinteractive, prompt before overwrite\n" \
+        "\t-R,-r\tCopies directories recursively"
+
+#define cpio_trivial_usage \
+        "-[dimtuv][F cpiofile]"
+#define cpio_full_usage \
+        "Extract or list files from a cpio archive\n" \
+        "Main operation mode:\n" \
+        "\td\t\tmake leading directories\n" \
+        "\ti\t\textract\n" \
+        "\tm\t\tpreserve mtime\n" \
+        "\tt\t\tlist\n" \
+        "\tv\t\tverbose\n" \
+        "\tu\t\tunconditional overwrite\n" \
+        "\tF\t\tinput from file"
+
+#define crond_trivial_usage \
+        "-d[#] -c <crondir> -f -b"
+#define crond_full_usage \
+        "\t-d [#] -l [#] -S -L logfile -f -b -c dir\n" \
+        "\t-d num\tdebug level\n" \
+        "\t-l num\tlog level (8 - default)\n" \
+        "\t-S\tlog to syslogd (default)\n" \
+        "\t-L file\tlog to file\n" \
+        "\t-f\trun in fordeground\n" \
+        "\t-b\trun in background (default)\n" \
+        "\t-c dir\tworking dir"
+
+#define crontab_trivial_usage \
+        "[-c dir] {file|-}|[-u|-l|-e|-d user]"
+#define crontab_full_usage \
+        "\tfile <opts>  replace crontab from file\n" \
+        "\t-    <opts>  replace crontab from stdin\n" \
+        "\t-u user      specify user\n" \
+        "\t-l [user]    list crontab for user\n" \
+        "\t-e [user]    edit crontab for user\n" \
+        "\t-d [user]    delete crontab for user\n" \
+        "\t-c dir       specify crontab directory"
+
+
+#define cut_trivial_usage \
+        "[OPTION]... [FILE]..."
+#define cut_full_usage \
+        "Prints selected fields from each input FILE to standard output.\n\n" \
+        "Options:\n" \
+        "\t-b LIST\t\tOutput only bytes from LIST\n" \
+        "\t-c LIST\t\tOutput only characters from LIST\n" \
+        "\t-d CHAR\t\tUse CHAR instead of tab as the field delimiter\n" \
+        "\t-s\t\tOutput only the lines containing delimiter\n" \
+        "\t-f N\t\tPrint only these fields\n" \
+        "\t-n\t\tIgnored"
+#define cut_example_usage \
+        "$ echo "Hello world" | cut -f 1 -d ' '\n" \
+        "Hello\n" \
+        "$ echo "Hello world" | cut -f 2 -d ' '\n" \
+        "world\n"
+
+#ifdef CONFIG_FEATURE_DATE_ISOFMT
+#define USAGE_DATE_ISOFMT(a) a
+#else
+#define USAGE_DATE_ISOFMT(a)
+#endif
+
+#define date_trivial_usage \
+        "[OPTION]... [MMDDhhmm[[CC]YY][.ss]] [+FORMAT]"
+#define date_full_usage \
+        "Displays the current time in the given FORMAT, or sets the system date.\n" \
+        "\nOptions:\n" \
+        "\t-R\t\tOutputs RFC-822 compliant date string\n" \
+        "\t-d STRING\tDisplays time described by STRING, not `now'\n" \
+        USAGE_DATE_ISOFMT("\t-I[TIMESPEC]\tOutputs an ISO-8601 compliant date/time string.\n" \
+        "\t\t\tTIMESPEC=`date' (or missing) for date only,\n" \
+        "\t\t\t`hours', `minutes', or `seconds' for date and,\n" \
+        "\t\t\ttime to the indicated precision.\n") \
+        "\t-s\t\tSets time described by STRING\n" \
+        "\t-r FILE\t\tDisplays the last modification time of FILE\n" \
+        "\t-u\t\tPrints or sets Coordinated Universal Time"
+#define date_example_usage \
+        "$ date\n" \
+        "Wed Apr 12 18:52:41 MDT 2000\n"
+
+#define dc_trivial_usage \
+        "expression ..."
+#define dc_full_usage \
+        "This is a Tiny RPN calculator that understands the\n" \
+        "following operations: +, add, -, sub, *, mul, /, div, %, mod, "\
+        "**, exp, and, or, not, eor.\n" \
+        "For example: 'dc 2 2 add' -> 4, and 'dc 8 8 \\* 2 2 + /' -> 16.\n" \
+        "\nOptions:\n" \
+        "p - Prints the value on the top of the stack, without altering the stack.\n" \
+        "f - Prints the entire contents of the stack without altering anything.\n" \
+        "o - Pops the value off the top of the stack and uses it to set the output radix.\n" \
+        "    Only 10 and 16 are supported."
+#define dc_example_usage \
+        "$ dc 2 2 + p\n" \
+        "4\n" \
+        "$ dc 8 8 \\* 2 2 + / p\n" \
+        "16\n" \
+        "$ dc 0 1 and p\n" \
+        "0\n" \
+        "$ dc 0 1 or p\n" \
+        "1\n" \
+        "$ echo 72 9 div 8 mul p | dc\n" \
+        "64\n"
+
+#define dd_trivial_usage \
+        "[if=FILE] [of=FILE] [bs=N] [count=N] [skip=N]\n" \
+        "\t  [seek=N] [conv=notrunc|noerror|sync]"
+#define dd_full_usage \
+        "Copy a file, converting and formatting according to options\n\n" \
+        "\tif=FILE\t\tread from FILE instead of stdin\n" \
+        "\tof=FILE\t\twrite to FILE instead of stdout\n" \
+        "\tbs=N\t\tread and write N bytes at a time\n" \
+        "\tcount=N\t\tcopy only N input blocks\n" \
+        "\tskip=N\t\tskip N input blocks\n" \
+        "\tseek=N\t\tskip N output blocks\n" \
+        "\tconv=notrunc\tdon't truncate output file\n" \
+        "\tconv=noerror\tcontinue after read errors\n" \
+        "\tconv=sync\tpad blocks with zeros\n" \
+        "\n" \
+        "Numbers may be suffixed by c (x1), w (x2), b (x512), kD (x1000), k (x1024),\n" \
+        "MD (x1000000), M (x1048576), GD (x1000000000) or G (x1073741824)."
+#define dd_example_usage \
+        "$ dd if=/dev/zero of=/dev/ram1 bs=1M count=4\n" \
+        "4+0 records in\n" \
+        "4+0 records out\n"
+
+#define deallocvt_trivial_usage \
+        "[N]"
+#define deallocvt_full_usage \
+         "Deallocate unused virtual terminal /dev/ttyN"
+
+#define delgroup_trivial_usage \
+        "GROUP"
+#define delgroup_full_usage \
+         "Deletes group GROUP from the system"
+
+#define deluser_trivial_usage \
+        "USER"
+#define deluser_full_usage \
+         "Deletes user USER from the system"
+
+#ifdef CONFIG_DEVFSD_FG_NP
+  #define USAGE_DEVFSD_FG_NP(a) a
+#else
+  #define USAGE_DEVFSD_FG_NP(a)
+#endif
+
+#define devfsd_trivial_usage \
+        "mntpnt [-v]"\
+        USAGE_DEVFSD_FG_NP("[-fg][-np]" )
+#define devfsd_full_usage \
+        "Optional daemon for managing devfs permissions and old device name symlinks.\n" \
+        "\nOptions:\n" \
+        "\tmntpnt\tThe mount point where devfs is mounted.\n\n" \
+        "\t-v\tPrint the protocol version numbers for devfsd\n" \
+        "\t\tand the kernel-side protocol version and exits." \
+        USAGE_DEVFSD_FG_NP( "\n\n\t-fg\tRun the daemon in the foreground.\n\n" \
+        "\t-np\tExit  after  parsing  the configuration file\n" \
+        "\t\tand processing synthetic REGISTER events.\n" \
+        "\t\tDo not poll for events.")
+
+#ifdef CONFIG_FEATURE_HUMAN_READABLE
+  #define USAGE_HUMAN_READABLE(a) a
+  #define USAGE_NOT_HUMAN_READABLE(a)
+#else
+  #define USAGE_HUMAN_READABLE(a)
+  #define USAGE_NOT_HUMAN_READABLE(a) a
+#endif
+#define df_trivial_usage \
+        "[-" USAGE_HUMAN_READABLE("hm") USAGE_NOT_HUMAN_READABLE("") "k] [FILESYSTEM ...]"
+#define df_full_usage \
+        "Print the filesystem space used and space available.\n\n" \
+        "Options:\n" \
+        USAGE_HUMAN_READABLE( \
+        "\n\t-h\tprint sizes in human readable format (e.g., 1K 243M 2G )\n" \
+        "\t-m\tprint sizes in megabytes\n" \
+        "\t-k\tprint sizes in kilobytes(default)") USAGE_NOT_HUMAN_READABLE( \
+        "\n\t-k\tprint sizes in kilobytes(compatibility)")
+#define df_example_usage \
+        "$ df\n" \
+        "Filesystem           1k-blocks      Used Available Use% Mounted on\n" \
+        "/dev/sda3              8690864   8553540    137324  98% /\n" \
+        "/dev/sda1                64216     36364     27852  57% /boot\n" \
+        "$ df /dev/sda3\n" \
+        "Filesystem           1k-blocks      Used Available Use% Mounted on\n" \
+        "/dev/sda3              8690864   8553540    137324  98% /\n"
+
+#define dirname_trivial_usage \
+        "FILENAME"
+#define dirname_full_usage \
+        "Strips non-directory suffix from FILENAME"
+#define dirname_example_usage \
+        "$ dirname /tmp/foo\n" \
+        "/tmp\n" \
+        "$ dirname /tmp/foo/\n" \
+        "/tmp\n"
+
+#define dmesg_trivial_usage \
+        "[-c] [-n LEVEL] [-s SIZE]"
+#define dmesg_full_usage \
+        "Prints or controls the kernel ring buffer\n\n" \
+        "Options:\n" \
+        "\t-c\t\tClears the ring buffer's contents after printing\n" \
+        "\t-n LEVEL\tSets console logging level\n" \
+        "\t-s SIZE\t\tUse a buffer of size SIZE"
+
+#define dos2unix_trivial_usage \
+        "[option] [FILE]"
+#define dos2unix_full_usage \
+        "Converts FILE from dos format to unix format.  When no option\n" \
+        "is given, the input is converted to the opposite output format.\n" \
+        "When no file is given, uses stdin for input and stdout for output.\n\n" \
+        "Options:\n" \
+        "\t-u\toutput will be in UNIX format\n" \
+        "\t-d\toutput will be in DOS format"
+
+#define dpkg_trivial_usage \
+        "[-ilCPru] [-F option] package_name"
+#define dpkg_full_usage \
+        "dpkg is a utility to install, remove and manage Debian packages.\n\n" \
+        "Options:\n" \
+        "\t-i\t\tInstall the package\n" \
+        "\t-l\t\tList of installed packages\n" \
+        "\t-C\t\tConfigure an unpackaged package\n" \
+        "\t-F depends\tIgnore depency problems\n" \
+        "\t-P\t\tPurge all files of a package\n" \
+        "\t-r\t\tRemove all but the configuration files for a package\n" \
+        "\t-u\t\tUnpack a package, but don't configure it"
+
+#define dpkg_deb_trivial_usage \
+        "[-cefxX] FILE [argument]"
+#define dpkg_deb_full_usage \
+        "Perform actions on Debian packages (.debs)\n\n" \
+        "Options:\n" \
+        "\t-c\tList contents of filesystem tree\n" \
+        "\t-e\tExtract control files to [argument] directory\n" \
+        "\t-f\tDisplay control field name starting with [argument]\n" \
+        "\t-x\tExtract packages filesystem tree to directory\n" \
+        "\t-X\tVerbose extract"
+#define dpkg_deb_example_usage \
+        "$ dpkg-deb -X ./busybox_0.48-1_i386.deb /tmp\n"
+
+#ifdef CONFIG_FEATURE_DU_DEFALT_BLOCKSIZE_1K
+#define USAGE_DU_DEFALT_BLOCKSIZE_1k(a) a
+#define USAGE_NOT_DU_DEFALT_BLOCKSIZE_1k(a)
+#else
+#define USAGE_DU_DEFALT_BLOCKSIZE_1k(a)
+#define USAGE_NOT_DU_DEFALT_BLOCKSIZE_1k(a) a
+#endif
+
+#define du_trivial_usage \
+        "[-aHLdclsx" USAGE_HUMAN_READABLE("hm") "k] [FILE]..."
+#define du_full_usage \
+        "Summarizes disk space used for each FILE and/or directory.\n" \
+        "Disk space is printed in units of " \
+        USAGE_DU_DEFALT_BLOCKSIZE_1k("1024") USAGE_NOT_DU_DEFALT_BLOCKSIZE_1k("512") \
+        " bytes.\n\n" \
+        "Options:\n" \
+        "\t-a\tshow sizes of files in addition to directories\n" \
+        "\t-H\tfollow symbolic links that are FILE command line args\n" \
+        "\t-L\tfollow all symbolic links encountered\n" \
+        "\t-d N\tlimit output to directories (and files with -a) of depth < N\n" \
+        "\t-c\toutput a grand total\n" \
+        "\t-l\tcount sizes many times if hard linked\n" \
+        "\t-s\tdisplay only a total for each argument\n" \
+        "\t-x\tskip directories on different filesystems\n" \
+        USAGE_HUMAN_READABLE( \
+        "\t-h\tprint sizes in human readable format (e.g., 1K 243M 2G )\n" \
+        "\t-m\tprint sizes in megabytes\n" ) \
+        "\t-k\tprint sizes in kilobytes" USAGE_DU_DEFALT_BLOCKSIZE_1k("(default)")
+#define du_example_usage \
+        "$ du\n" \
+        "16      ./CVS\n" \
+        "12      ./kernel-patches/CVS\n" \
+        "80      ./kernel-patches\n" \
+        "12      ./tests/CVS\n" \
+        "36      ./tests\n" \
+        "12      ./scripts/CVS\n" \
+        "16      ./scripts\n" \
+        "12      ./docs/CVS\n" \
+        "104     ./docs\n" \
+        "2417    .\n"
+
+#define dumpkmap_trivial_usage \
+        "> keymap"
+#define dumpkmap_full_usage \
+        "Prints out a binary keyboard translation table to standard output."
+#define dumpkmap_example_usage \
+        "$ dumpkmap > keymap\n"
+
+#define dumpleases_trivial_usage \
+        "[-r|-a] [-f LEASEFILE]"
+#define dumpleases_full_usage \
+        "Displays the DHCP leases granted by udhcpd.\n\n" \
+        "Options:\n" \
+        "\t-f,\t--file=FILENAME\tLeases file to load\n" \
+        "\t-r,\t--remaining\tInterpret lease times as time remaing\n" \
+        "\t-a,\t--absolute\tInterpret lease times as expire time"
+
+#ifdef CONFIG_FEATURE_FANCY_ECHO
+  #define USAGE_FANCY_ECHO(a) a
+#else
+  #define USAGE_FANCY_ECHO(a)
+#endif
+
+#define echo_trivial_usage \
+        USAGE_FANCY_ECHO("[-neE] ") "[ARG ...]"
+#define echo_full_usage \
+        "Prints the specified ARGs to stdout\n\n" \
+        USAGE_FANCY_ECHO("Options:\n" \
+        "\t-n\tsuppress trailing newline\n" \
+        "\t-e\tinterpret backslash-escaped characters (i.e., \\t=tab)\n" \
+        "\t-E\tdisable interpretation of backslash-escaped characters")
+#define echo_example_usage \
+        "$ echo "Erik is cool"\n" \
+        "Erik is cool\n" \
+        USAGE_FANCY_ECHO("$  echo -e "Erik\\nis\\ncool"\n" \
+        "Erik\n" \
+        "is\n" \
+        "cool\n" \
+        "$ echo "Erik\\nis\\ncool"\n" \
+        "Erik\\nis\\ncool\n")
+
+#define env_trivial_usage \
+        "[-iu] [-] [name=value]... [command]"
+#define env_full_usage \
+        "Prints the current environment or runs a program after setting\n" \
+        "up the specified environment.\n\n" \
+        "Options:\n" \
+        "\t-, -i\tstart with an empty environment\n" \
+        "\t-u\tremove variable from the environment"
+
+#define expr_trivial_usage \
+        "EXPRESSION"
+#define expr_full_usage \
+        "Prints the value of EXPRESSION to standard output.\n\n" \
+        "EXPRESSION may be:\n" \
+        "\tARG1 |  ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n" \
+        "\tARG1 &  ARG2 ARG1 if neither argument is null or 0, otherwise 0\n" \
+        "\tARG1 <  ARG2 ARG1 is less than ARG2\n" \
+        "\tARG1 <= ARG2 ARG1 is less than or equal to ARG2\n" \
+        "\tARG1 =  ARG2 ARG1 is equal to ARG2\n" \
+        "\tARG1 != ARG2 ARG1 is unequal to ARG2\n" \
+        "\tARG1 >= ARG2 ARG1 is greater than or equal to ARG2\n" \
+        "\tARG1 >  ARG2 ARG1 is greater than ARG2\n" \
+        "\tARG1 +  ARG2 arithmetic sum of ARG1 and ARG2\n" \
+        "\tARG1 -  ARG2 arithmetic difference of ARG1 and ARG2\n" \
+        "\tARG1 *  ARG2 arithmetic product of ARG1 and ARG2\n" \
+        "\tARG1 /  ARG2 arithmetic quotient of ARG1 divided by ARG2\n" \
+        "\tARG1 %  ARG2 arithmetic remainder of ARG1 divided by ARG2\n" \
+        "\tSTRING : REGEXP             anchored pattern match of REGEXP in STRING\n" \
+        "\tmatch STRING REGEXP         same as STRING : REGEXP\n" \
+        "\tsubstr STRING POS LENGTH    substring of STRING, POS counted from 1\n" \
+        "\tindex STRING CHARS          index in STRING where any CHARS is found,\n" \
+        "\t                            or 0\n" \
+        "\tlength STRING               length of STRING\n" \
+        "\tquote TOKEN                 interpret TOKEN as a string, even if\n" \
+        "\t                            it is a keyword like `match' or an\n" \
+        "\t                            operator like `/'\n" \
+        "\t( EXPRESSION )              value of EXPRESSION\n\n" \
+        "Beware that many operators need to be escaped or quoted for shells.\n" \
+        "Comparisons are arithmetic if both ARGs are numbers, else\n" \
+        "lexicographical.  Pattern matches return the string matched between \n" \
+        "\\( and \\) or null; if \\( and \\) are not used, they return the number \n" \
+        "of characters matched or 0."
+
+#define false_trivial_usage \
+        ""
+#define false_full_usage \
+        "Return an exit code of FALSE (1)."
+#define false_example_usage \
+        "$ false\n" \
+        "$ echo $?\n" \
+        "1\n"
+
+#define fbset_trivial_usage \
+        "[options] [mode]"
+#define fbset_full_usage \
+        "Show and modify frame buffer settings"
+#define fbset_example_usage \
+        "$ fbset\n" \
+        "mode "1024x768-76"\n" \
+        "\t# D: 78.653 MHz, H: 59.949 kHz, V: 75.694 Hz\n" \
+        "\tgeometry 1024 768 1024 768 16\n" \
+        "\ttimings 12714 128 32 16 4 128 4\n" \
+        "\taccel false\n" \
+        "\trgba 5/11,6/5,5/0,0/0\n" \
+        "endmode\n"
+
+#define fdflush_trivial_usage \
+        "DEVICE"
+#define fdflush_full_usage \
+        "Forces floppy disk drive to detect disk change"
+
+#define fdformat_trivial_usage \
+        "[-n] DEVICE"
+#define fdformat_full_usage \
+        "Low-level formats a floppy disk\n\n" \
+        "Options:\n" \
+        "\t-n\tDon't verify after format"
+
+#define fdisk_trivial_usage \
+        "[-luv] [-C CYLINDERS] [-H HEADS] [-S SECTORS] [-b SSZ] DISK"
+#define fdisk_full_usage \
+        "Change partition table\n" \
+        "Options:\n" \
+        "\t-l  List partition table(s)\n" \
+        "\t-u  Give Start and End in sector (instead of cylinder) units\n" \
+        "\t-s PARTITION  Give partition size(s) in blocks\n" \
+        "\t-b 2048: (for certain MO disks) use 2048-byte sectors\n" \
+        "\t-C CYLINDERS  Set the number of cylinders\n" \
+        "\t-H HEADS  Set the number of heads\n" \
+        "\t-S SECTORS  Set the number of sectors\n" \
+        "\t-v  Give fdisk version"
+
+#ifdef CONFIG_FEATURE_FIND_TYPE
+  #define USAGE_FIND_TYPE(a) a
+#else
+  #define USAGE_FIND_TYPE(a)
+#endif
+#ifdef CONFIG_FEATURE_FIND_PERM
+  #define USAGE_FIND_PERM(a) a
+#else
+  #define USAGE_FIND_PERM(a)
+#endif
+#ifdef CONFIG_FEATURE_FIND_MTIME
+  #define USAGE_FIND_MTIME(a) a
+#else
+  #define USAGE_FIND_MTIME(a)
+#endif
+#ifdef CONFIG_FEATURE_FIND_NEWER
+  #define USAGE_FIND_NEWER(a) a
+#else
+  #define USAGE_FIND_NEWER(a)
+#endif
+#ifdef CONFIG_FEATURE_FIND_INUM
+  #define USAGE_FIND_INUM(a) a
+#else
+  #define USAGE_FIND_INUM(a)
+#endif
+
+#define find_trivial_usage \
+        "[PATH...] [EXPRESSION]"
+#define find_full_usage \
+        "Search for files in a directory hierarchy.  The default PATH is\n" \
+        "the current directory; default EXPRESSION is '-print'\n" \
+        "\nEXPRESSION may consist of:\n" \
+        "\t-follow\t\tDereference symbolic links.\n" \
+        "\t-name PATTERN\tFile name (leading directories removed) matches PATTERN.\n" \
+        "\t-print\t\tPrint (default and assumed).\n" \
+        USAGE_FIND_TYPE( \
+        "\n\t-type X\t\tFiletype matches X (where X is one of: f,d,l,b,c,...)" \
+) USAGE_FIND_PERM( \
+        "\n\t-perm PERMS\tPermissions match any of (+NNN); all of (-NNN);\n\t\t\tor exactly (NNN)" \
+) USAGE_FIND_MTIME( \
+        "\n\t-mtime TIME\tModified time is greater than (+N); less than (-N);\n\t\t\tor exactly (N) days" \
+) USAGE_FIND_NEWER( \
+        "\n\t-newer FILE\tModified time is more recent than FILE's" \
+) USAGE_FIND_INUM( \
+        "\n\t-inum N\t\tFile has inode number N")
+#define find_example_usage \
+        "$ find / -name passwd\n" \
+        "/etc/passwd\n"
+
+#define fold_trivial_usage \
+        "[-bsw] [FILE]"
+#define fold_full_usage \
+        "Wrap input lines in each FILE (standard input by default), writing to\n" \
+        "standard output.\n\n" \
+        "Options:\n" \
+        "\t-b\tcount bytes rather than columns\n" \
+        "\t-s\tbreak at spaces\n" \
+        "\t-w\tuse WIDTH columns instead of 80"
+
+#define free_trivial_usage \
+        ""
+#define free_full_usage \
+        "Displays the amount of free and used system memory"
+#define free_example_usage \
+        "$ free\n" \
+        "              total         used         free       shared      buffers\n" \
+        "  Mem:       257628       248724         8904        59644        93124\n" \
+        " Swap:       128516         8404       120112\n" \
+        "Total:       386144       257128       129016\n" \
+
+#define freeramdisk_trivial_usage \
+        "DEVICE"
+#define freeramdisk_full_usage \
+        "Frees all memory used by the specified ramdisk."
+#define freeramdisk_example_usage \
+        "$ freeramdisk /dev/ram2\n"
+
+#define fsck_minix_trivial_usage \
+        "[-larvsmf] /dev/name"
+#define fsck_minix_full_usage \
+        "Performs a consistency check for MINIX filesystems.\n\n" \
+        "Options:\n" \
+        "\t-l\tLists all filenames\n" \
+        "\t-r\tPerform interactive repairs\n" \
+        "\t-a\tPerform automatic repairs\n" \
+        "\t-v\tverbose\n" \
+        "\t-s\tOutputs super-block information\n" \
+        "\t-m\tActivates MINIX-like \"mode not cleared\" warnings\n" \
+        "\t-f\tForce file system check."
+
+#define ftpget_trivial_usage \
+        "[options] remote-host local-file remote-file"
+#define ftpget_full_usage \
+        "Retrieve a remote file via FTP.\n\n" \
+        "Options:\n" \
+        "\t-c, --continue         Continue a previous transfer\n" \
+        "\t-v, --verbose          Verbose\n" \
+        "\t-u, --username         Username to be used\n" \
+        "\t-p, --password         Password to be used\n" \
+        "\t-P, --port             Port number to be used"
+
+#define ftpput_trivial_usage \
+        "[options] remote-host remote-file local-file"
+#define ftpput_full_usage \
+        "Store a local file on a remote machine via FTP.\n\n" \
+        "Options:\n" \
+        "\t-v, --verbose          Verbose\n" \
+        "\t-u, --username         Username to be used\n" \
+        "\t-p, --password         Password to be used\n" \
+        "\t-P, --port             Port number to be used"
+
+#define getopt_trivial_usage \
+        "[OPTIONS]..."
+#define getopt_full_usage \
+        "Parse command options\n" \
+        "\t-a, --alternative            Allow long options starting with single -\n" \
+        "\t-l, --longoptions=longopts   Long options to be recognized\n" \
+        "\t-n, --name=progname          The name under which errors are reported\n" \
+        "\t-o, --options=optstring      Short options to be recognized\n" \
+        "\t-q, --quiet                  Disable error reporting by getopt(3)\n" \
+        "\t-Q, --quiet-output           No normal output\n" \
+        "\t-s, --shell=shell            Set shell quoting conventions\n" \
+        "\t-T, --test                   Test for getopt(1) version\n" \
+        "\t-u, --unquoted               Do not quote the output"
+#define getopt_example_usage \
+        "$ cat getopt.test\n" \
+        "#!/bin/sh\n" \
+        "GETOPT=`getopt -o ab:c:: --long a-long,b-long:,c-long:: \\\n" \
+        "       -n 'example.busybox' -- "$@"`\n" \
+        "if [ $? != 0 ] ; then  exit 1 ; fi\n" \
+        "eval set -- "$GETOPT"\n" \
+        "while true ; do\n" \
+        " case $1 in\n" \
+        "   -a|--a-long) echo \"Option a\" ; shift ;;\n" \
+        "   -b|--b-long) echo \"Option b, argument `$2'\" ; shift 2 ;;\n" \
+        "   -c|--c-long)\n" \
+        "     case "$2" in\n" \
+        "       \"\") echo \"Option c, no argument\"; shift 2 ;;\n" \
+        "       *)  echo \"Option c, argument `$2'\" ; shift 2 ;;\n" \
+        "     esac ;;\n" \
+        "   --) shift ; break ;;\n" \
+        "   *) echo \"Internal error!\" ; exit 1 ;;\n" \
+        " esac\n" \
+        "done\n"
+
+
+#define getpkg_trivial_usage \
+        "[-afk] [PACKAGE] {[URL] | [DIR]}"
+#define getpkg_full_usage \
+        "Install a Trinux PACKAGE from a FILE or an URL ." \
+        "\t-a,\t\tget all packages\n" \
+        "\t-f,\t\tpackage file, no need to download\n" \
+        "\t-k,\t\tkernel package"
+#define getpkg_example_usage \
+        "$ getpkg\n" \
+        "$ getpkg -a\n" \
+        "$ getpkg -f name\n" \
+        "$ getpkg -fk name /media/cdrom/trinux/pkg\n" \
+        "$ getpkg -k name\n" \
+        "$ getpkg name http://www.trinux.org/pkg/\n"
+
+
+#define getty_trivial_usage \
+        "[OPTIONS]... baud_rate,... line [termtype]"
+#define getty_full_usage \
+        "Opens a tty, prompts for a login name, then invokes /bin/login\n\n" \
+        "Options:\n" \
+        "\t-h\t\tEnable hardware (RTS/CTS) flow control.\n" \
+        "\t-i\t\tDo not display /etc/issue before running login.\n" \
+        "\t-L\t\tLocal line, so do not do carrier detect.\n" \
+        "\t-m\t\tGet baud rate from modem's CONNECT status message.\n" \
+        "\t-w\t\tWait for a CR or LF before sending /etc/issue.\n" \
+        "\t-n\t\tDo not prompt the user for a login name.\n" \
+        "\t-f issue_file\tDisplay issue_file instead of /etc/issue.\n" \
+        "\t-l login_app\tInvoke login_app instead of /bin/login.\n" \
+        "\t-t timeout\tTerminate after timeout if no username is read.\n" \
+        "\t-I initstring\tSets the init string to send before anything else.\n" \
+        "\t-H login_host\tLog login_host into the utmp file as the hostname."
+
+
+#define grep_trivial_usage \
+        "[-ihHnqvs] PATTERN [FILEs...]"
+#define grep_full_usage \
+        "Search for PATTERN in each FILE or standard input.\n\n" \
+        "Options:\n" \
+        "\t-H\tprefix output lines with filename where match was found\n" \
+        "\t-h\tsuppress the prefixing filename on output\n" \
+        "\t-i\tignore case distinctions\n" \
+        "\t-l\tlist names of files that match\n" \
+        "\t-n\tprint line number with output lines\n" \
+        "\t-q\tbe quiet. Returns 0 if result was found, 1 otherwise\n" \
+        "\t-v\tselect non-matching lines\n" \
+        "\t-s\tsuppress file open/read error messages"
+#define grep_example_usage \
+        "$ grep root /etc/passwd\n" \
+        "root:x:0:0:root:/root:/bin/bash\n" \
+        "$ grep ^[rR]oo. /etc/passwd\n" \
+        "root:x:0:0:root:/root:/bin/bash\n"
+
+#define gunzip_trivial_usage \
+        "[OPTION]... FILE"
+#define gunzip_full_usage \
+        "Uncompress FILE (or standard input if FILE is '-').\n\n" \
+        "Options:\n" \
+        "\t-c\tWrite output to standard output\n" \
+        "\t-f\tForce read when source is a terminal\n" \
+        "\t-t\tTest compressed file integrity"
+#define gunzip_example_usage \
+        "$ ls -la /tmp/BusyBox*\n" \
+        "-rw-rw-r--    1 andersen andersen   557009 Apr 11 10:55 /tmp/BusyBox-0.43.tar.gz\n" \
+        "$ gunzip /tmp/BusyBox-0.43.tar.gz\n" \
+        "$ ls -la /tmp/BusyBox*\n" \
+        "-rw-rw-r--    1 andersen andersen  1761280 Apr 14 17:47 /tmp/BusyBox-0.43.tar\n"
+
+#define gzip_trivial_usage \
+        "[OPTION]... [FILE]..."
+#define gzip_full_usage \
+        "Compress FILE(s) with maximum compression.\n" \
+        "When FILE is '-' or unspecified, reads standard input.  Implies -c.\n\n" \
+        "Options:\n" \
+        "\t-c\tWrite output to standard output instead of FILE.gz\n" \
+        "\t-d\tDecompress\n" \
+        "\t-f\tForce write when destination is a terminal"
+#define gzip_example_usage \
+        "$ ls -la /tmp/busybox*\n" \
+        "-rw-rw-r--    1 andersen andersen  1761280 Apr 14 17:47 /tmp/busybox.tar\n" \
+        "$ gzip /tmp/busybox.tar\n" \
+        "$ ls -la /tmp/busybox*\n" \
+        "-rw-rw-r--    1 andersen andersen   554058 Apr 14 17:49 /tmp/busybox.tar.gz\n"
+
+#define halt_trivial_usage \
+        "[-d<delay>]"
+#define halt_full_usage \
+        "Halt the system.\n" \
+        "Options:\n" \
+        "\t-d\t\tdelay interval for halting."
+
+#ifdef CONFIG_FEATURE_HDPARM_GET_IDENTITY
+#define USAGE_HDPARM_IDENT(a) a
+#else
+#define USAGE_HDPARM_IDENT(a)
+#endif
+
+#ifdef CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF
+#define USAGE_SCAN_HWIF(a) a
+#else
+#define USAGE_SCAN_HWIF(a)
+#endif
+
+#ifdef CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF
+#define USAGE_UNREGISTER_HWIF(a) a
+#else
+#define USAGE_UNREGISTER_HWIF(a)
+#endif
+
+#ifdef CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET
+#define USAGE_DRIVE_RESET(a) a
+#else
+#define USAGE_DRIVE_RESET(a)
+#endif
+
+#ifdef CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF
+#define USAGE_TRISTATE_HWIF(a) a
+#else
+#define USAGE_TRISTATE_HWIF(a)
+#endif
+
+#ifdef CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA
+#define USAGE_GETSET_DMA(a) a
+#else
+#define USAGE_GETSET_DMA(a)
+#endif
+
+#define hdparm_trivial_usage \
+        "[options] [device] .."
+#define hdparm_full_usage \
+        "Options:" \
+        "\t-a   get/set fs readahead\n" \
+        "\t-A   set drive read-lookahead flag (0/1)\n" \
+        "\t-b   get/set bus state (0 == off, 1 == on, 2 == tristate)\n" \
+        "\t-B   set Advanced Power Management setting (1-255)\n" \
+        "\t-c   get/set IDE 32-bit IO setting\n" \
+        "\t-C   check IDE power mode status\n" \
+        USAGE_GETSET_DMA("\t-d   get/set using_dma flag\n") \
+        "\t-D   enable/disable drive defect-mgmt\n" \
+        "\t-f   flush buffer cache for device on exit\n" \
+        "\t-g   display drive geometry\n" \
+        "\t-h   display terse usage information\n" \
+        "\t-i   display drive identification\n" \
+        USAGE_HDPARM_IDENT("\t-I   detailed/current information directly from drive\n") \
+        USAGE_HDPARM_IDENT("\t-Istdin  similar to -I, but wants /proc/ide/" "*" "/hd?/identify as input\n") \
+        "\t-k   get/set keep_settings_over_reset flag (0/1)\n" \
+        "\t-K   set drive keep_features_over_reset flag (0/1)\n" \
+        "\t-L   set drive doorlock (0/1) (removable harddisks only)\n" \
+        "\t-m   get/set multiple sector count\n" \
+        "\t-n   get/set ignore-write-errors flag (0/1)\n" \
+        "\t-p   set PIO mode on IDE interface chipset (0,1,2,3,4,...)\n" \
+        "\t-P   set drive prefetch count\n" \
+        "\t-q   change next setting quietly\n" \
+        "\t-Q   get/set DMA tagged-queuing depth (if supported)\n" \
+        "\t-r   get/set readonly flag (DANGEROUS to set)\n" \
+        USAGE_SCAN_HWIF("\t-R   register an IDE interface (DANGEROUS)\n") \
+        "\t-S   set standby (spindown) timeout\n" \
+        "\t-t   perform device read timings\n" \
+        "\t-T   perform cache read timings\n" \
+        "\t-u   get/set unmaskirq flag (0/1)\n" \
+        USAGE_UNREGISTER_HWIF("\t-U   un-register an IDE interface (DANGEROUS)\n") \
+        "\t-v   defaults; same as -mcudkrag for IDE drives\n" \
+        "\t-V   display program version and exit immediately\n" \
+        USAGE_DRIVE_RESET("\t-w   perform device reset (DANGEROUS)\n") \
+        "\t-W   set drive write-caching flag (0/1) (DANGEROUS)\n" \
+        USAGE_TRISTATE_HWIF("\t-x   tristate device for hotswap (0/1) (DANGEROUS)\n") \
+        "\t-X   set IDE xfer mode (DANGEROUS)\n" \
+        "\t-y   put IDE drive in standby mode\n" \
+        "\t-Y   put IDE drive to sleep\n" \
+        "\t-Z   disable Seagate auto-powersaving mode\n" \
+        "\t-z   re-read partition table"
+
+#ifdef CONFIG_FEATURE_FANCY_HEAD
+#define USAGE_FANCY_HEAD(a) a
+#else
+#define USAGE_FANCY_HEAD(a)
+#endif
+
+#define head_trivial_usage \
+        "[OPTION]... [FILE]..."
+#define head_full_usage \
+        "Print first 10 lines of each FILE to standard output.\n" \
+        "With more than one FILE, precede each with a header giving the\n" \
+        "file name. With no FILE, or when FILE is -, read standard input.\n\n" \
+        "Options:\n" \
+        "\t-n NUM\t\tPrint first NUM lines instead of first 10" \
+        USAGE_FANCY_HEAD( \
+        "\n\t-c NUM\t\toutput the first NUM bytes\n" \
+        "\t-q\t\tnever output headers giving file names\n" \
+        "\t-v\t\talways output headers giving file names" )
+#define head_example_usage \
+        "$ head -n 2 /etc/passwd\n" \
+        "root:x:0:0:root:/root:/bin/bash\n" \
+        "daemon:x:1:1:daemon:/usr/sbin:/bin/sh\n"
+
+#define hexdump_trivial_usage \
+        "[-[bcdefnosvx]] [OPTION] FILE"
+#define hexdump_full_usage \
+        "The hexdump utility is a filter which displays the specified files,\n" \
+        "or the standard input, if no files are specified, in a user specified\n"\
+        "format\n" \
+        "\t-b\t\tOne-byte octal display\n" \
+        "\t-c\t\tOne-byte character display\n" \
+        "\t-d\t\tTwo-byte decimal display\n" \
+        "\t-e FORMAT STRING\n" \
+        "\t-f FORMAT FILE\n" \
+        "\t-n LENGTH\tInterpret only length bytes of input\n" \
+        "\t-o\t\tTwo-byte octal display\n" \
+        "\t-s OFFSET\tSkip offset byte\n" \
+        "\t-v\t\tdisplay all input data\n" \
+        "\t-x\t\tTwo-byte hexadecimal display"
+
+#define hostid_trivial_usage \
+        ""
+#define hostid_full_usage \
+        "Print out a unique 32-bit identifier for the machine."
+
+#define hostname_trivial_usage \
+        "[OPTION] {hostname | -F FILE}"
+#define hostname_full_usage \
+        "Get or set the hostname or DNS domain name. If a hostname is given\n" \
+        "(or FILE with the -F parameter), the host name will be set.\n\n" \
+        "Options:\n" \
+        "\t-s\tShort\n" \
+        "\t-i\tAddresses for the hostname\n" \
+        "\t-d\tDNS domain name\n" \
+        "\t-f\tFully qualified domain name\n" \
+        "\t-F FILE\tUse the contents of FILE to specify the hostname"
+#define hostname_example_usage \
+        "$ hostname\n" \
+        "sage\n"
+
+#ifdef CONFIG_FEATURE_HTTPD_BASIC_AUTH
+  #define USAGE_HTTPD_BASIC_AUTH(a) a
+  #ifdef CONFIG_FEATURE_HTTPD_AUTH_MD5
+    #define USAGE_HTTPD_AUTH_MD5(a) a
+  #else
+    #define USAGE_HTTPD_AUTH_MD5(a)
+  #endif
+#else
+  #define USAGE_HTTPD_BASIC_AUTH(a)
+  #define USAGE_HTTPD_AUTH_MD5(a)
+#endif
+#ifdef CONFIG_FEATURE_HTTPD_USAGE_FROM_INETD_ONLY
+  #define USAGE_HTTPD_STANDALONE(a)
+  #define USAGE_HTTPD_SETUID(a)
+#else
+  #define USAGE_HTTPD_STANDALONE(a) a
+  #ifdef CONFIG_FEATURE_HTTPD_SETUID
+    #define USAGE_HTTPD_SETUID(a) a
+  #else
+    #define USAGE_HTTPD_SETUID(a)
+  #endif
+#endif
+#define httpd_trivial_usage \
+        "[-c <conf file>]" \
+        USAGE_HTTPD_STANDALONE(" [-p <port>]") \
+        USAGE_HTTPD_SETUID(" [-u user]") \
+        USAGE_HTTPD_BASIC_AUTH(" [-r <realm>]") \
+        USAGE_HTTPD_AUTH_MD5(" [-m pass]") \
+        " [-h home]" \
+        " [-d/-e <string>]"
+#define httpd_full_usage \
+       "Listens for incoming http server requests.\n\n"\
+       "Options:\n" \
+       "\t-c FILE\t\tSpecifies configuration file. (default httpd.conf)\n" \
+       USAGE_HTTPD_STANDALONE("\t-p PORT\tServer port (default 80)\n") \
+       USAGE_HTTPD_SETUID("\t-u USER\tSet uid to USER after listening privileges port\n") \
+       USAGE_HTTPD_BASIC_AUTH("\t-r REALM\tAuthentication Realm for Basic Authentication\n") \
+       USAGE_HTTPD_AUTH_MD5("\t-m PASS\t\tCrypt PASS with md5 algorithm\n") \
+       "\t-h HOME  \tSpecifies http HOME directory (default ./)\n" \
+       "\t-e STRING\tHtml encode STRING\n" \
+       "\t-d STRING\tURL decode STRING"
+
+#define hwclock_trivial_usage \
+        "[-r|--show] [-s|--hctosys] [-w|--systohc] [-l|--localtime] [-u|--utc]"
+#define hwclock_full_usage \
+        "Query and set the hardware clock (RTC)\n\n" \
+        "Options:\n" \
+        "\t-r\tread hardware clock and print result\n" \
+        "\t-s\tset the system time from the hardware clock\n" \
+        "\t-w\tset the hardware clock to the current system time\n" \
+        "\t-u\tthe hardware clock is kept in coordinated universal time\n" \
+        "\t-l\tthe hardware clock is kept in local time"
+
+#ifdef CONFIG_SELINUX
+  #define USAGE_SELINUX(a) a
+#else
+  #define USAGE_SELINUX(a)
+#endif
+
+#define id_trivial_usage \
+        "[OPTIONS]... [USERNAME]"
+#define id_full_usage \
+        "Print information for USERNAME or the current user\n\n" \
+        "Options:\n" \
+        USAGE_SELINUX("\t-c\tprints only the security context\n") \
+        "\t-g\tprints only the group ID\n" \
+        "\t-u\tprints only the user ID\n" \
+        "\t-n\tprint a name instead of a number\n" \
+        "\t-r\tprints the real user ID instead of the effective ID"
+#define id_example_usage \
+        "$ id\n" \
+        "uid=1000(andersen) gid=1000(andersen)\n"
+
+#ifdef CONFIG_FEATURE_IFCONFIG_SLIP
+  #define USAGE_SIOCSKEEPALIVE(a) a
+#else
+  #define USAGE_SIOCSKEEPALIVE(a)
+#endif
+#ifdef CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
+  #define USAGE_IFCONFIG_MII(a) a
+#else
+  #define USAGE_IFCONFIG_MII(a)
+#endif
+#ifdef CONFIG_FEATURE_IFCONFIG_HW
+  #define USAGE_IFCONFIG_HW(a) a
+#else
+  #define USAGE_IFCONFIG_HW(a)
+#endif
+#ifdef CONFIG_FEATURE_IFCONFIG_STATUS
+  #define USAGE_IFCONFIG_OPT_A(a) a
+#else
+  #define USAGE_IFCONFIG_OPT_A(a)
+#endif
+#ifdef CONFIG_FEATURE_IPV6
+  #define USAGE_IPV6(a) a
+#else
+  #define USAGE_IPV6(a)
+#endif
+
+#define ifconfig_trivial_usage \
+        USAGE_IFCONFIG_OPT_A("[-a]") " <interface> [<address>]"
+#define ifconfig_full_usage \
+        "configure a network interface\n\n" \
+        "Options:\n" \
+        USAGE_IPV6("[add <address>[/<prefixlen>]]\n") \
+        USAGE_IPV6("[del <address>[/<prefixlen>]]\n") \
+        "\t[[-]broadcast [<address>]]  [[-]pointopoint [<address>]]\n" \
+        "\t[netmask <address>]  [dstaddr <address>]\n" \
+        USAGE_SIOCSKEEPALIVE("\t[outfill <NN>] [keepalive <NN>]\n") \
+        "\t" USAGE_IFCONFIG_HW("[hw ether <address>]  ") \
+    "[metric <NN>]  [mtu <NN>]\n" \
+        "\t[[-]trailers]  [[-]arp]  [[-]allmulti]\n" \
+        "\t[multicast]  [[-]promisc]  [txqueuelen <NN>]  [[-]dynamic]\n" \
+        USAGE_IFCONFIG_MII("\t[mem_start <NN>]  [io_addr <NN>]  [irq <NN>]\n") \
+        "\t[up|down] ..."
+
+#define ifup_trivial_usage \
+        "<-ahinv> <ifaces...>"
+#define ifup_full_usage \
+        "ifup <options> <ifaces...>\n\n" \
+        "Options:\n" \
+        "\t-h\tthis help\n" \
+        "\t-a\tde/configure all interfaces automatically\n" \
+        "\t-i FILE\tuse FILE for interface definitions\n" \
+        "\t-n\tprint out what would happen, but don't do it\n" \
+        "\t\t\t(note that this option doesn't disable mappings)\n" \
+        "\t-v\tprint out what would happen before doing it\n" \
+        "\t-m\tdon't run any mappings\n" \
+        "\t-f\tforce de/configuration"
+
+#define ifdown_trivial_usage \
+        "<-ahinv> <ifaces...>"
+#define ifdown_full_usage \
+        "ifdown <options> <ifaces...>\n\n" \
+        "Options:\n" \
+        "\t-h\tthis help\n" \
+        "\t-a\tde/configure all interfaces automatically\n" \
+        "\t-i FILE\tuse FILE for interface definitions\n" \
+        "\t-n\tprint out what would happen, but don't do it\n" \
+        "\t\t(note that this option doesn't disable mappings)\n" \
+        "\t-v\tprint out what would happen before doing it\n" \
+        "\t-m\tdon't run any mappings\n" \
+        "\t-f\tforce de/configuration"
+
+#define inetd_trivial_usage \
+        "[-q len] [conf]"
+#define inetd_full_usage \
+        "Listens for network connections and launches programs\n\n" \
+        "Option:\n" \
+        "\t-q\tSets the size of the socket listen queue to\n" \
+        "\t\tthe specified value. Default is 128."
+
+#define init_trivial_usage \
+        ""
+#define init_full_usage \
+        "Init is the parent of all processes."
+#define init_notes_usage \
+"This version of init is designed to be run only by the kernel.\n" \
+"\n" \
+"BusyBox init doesn't support multiple runlevels.  The runlevels field of\n" \
+"the /etc/inittab file is completely ignored by BusyBox init. If you want \n" \
+"runlevels, use sysvinit.\n" \
+"\n" \
+"BusyBox init works just fine without an inittab.  If no inittab is found, \n" \
+"it has the following default behavior:\n" \
+"\n" \
+"       ::sysinit:/etc/init.d/rcS\n" \
+"       ::askfirst:/bin/sh\n" \
+"       ::ctrlaltdel:/sbin/reboot\n" \
+"       ::shutdown:/sbin/swapoff -a\n" \
+"       ::shutdown:/bin/umount -a -r\n" \
+"       ::restart:/sbin/init\n" \
+"\n" \
+"if it detects that /dev/console is _not_ a serial console, it will also run:\n" \
+"\n" \
+"       tty2::askfirst:/bin/sh\n" \
+"       tty3::askfirst:/bin/sh\n" \
+"       tty4::askfirst:/bin/sh\n" \
+"\n" \
+"If you choose to use an /etc/inittab file, the inittab entry format is as follows:\n" \
+"\n" \
+"       <id>:<runlevels>:<action>:<process>\n" \
+"\n" \
+"       <id>:\n" \
+"\n" \
+"               WARNING: This field has a non-traditional meaning for BusyBox init!\n" \
+"               The id field is used by BusyBox init to specify the controlling tty for\n" \
+"               the specified process to run on.  The contents of this field are\n" \
+"               appended to "/dev/" and used as-is.  There is no need for this field to\n" \
+"               be unique, although if it isn't you may have strange results.  If this\n" \
+"               field is left blank, the controlling tty is set to the console.  Also\n" \
+"               note that if BusyBox detects that a serial console is in use, then only\n" \
+"               entries whose controlling tty is either the serial console or /dev/null\n" \
+"               will be run.  BusyBox init does nothing with utmp.  We don't need no\n" \
+"               stinkin' utmp.\n" \
+"\n" \
+"       <runlevels>:\n" \
+"\n" \
+"               The runlevels field is completely ignored.\n" \
+"\n" \
+"       <action>:\n" \
+"\n" \
+"               Valid actions include: sysinit, respawn, askfirst, wait,\n" \
+"               once, restart, ctrlaltdel, and shutdown.\n" \
+"\n" \
+"               The available actions can be classified into two groups: actions\n" \
+"               that are run only once, and actions that are re-run when the specified\n" \
+"               process exits.\n" \
+"\n" \
+"               Run only-once actions:\n" \
+"\n" \
+"                       'sysinit' is the first item run on boot.  init waits until all\n" \
+"                       sysinit actions are completed before continuing.  Following the\n" \
+"                       completion of all sysinit actions, all 'wait' actions are run.\n" \
+"                       'wait' actions, like  'sysinit' actions, cause init to wait until\n" \
+"                       the specified task completes.  'once' actions are asynchronous,\n" \
+"                       therefore, init does not wait for them to complete.  'restart' is\n" \
+"                       the action taken to restart the init process.  By default this should\n" \
+"                       simply run /sbin/init, but can be a script which runs pivot_root or it\n" \
+"                       can do all sorts of other interesting things.  The 'ctrlaltdel' init\n" \
+"                       actions are run when the system detects that someone on the system\n" \
+"                       console has pressed the CTRL-ALT-DEL key combination.  Typically one\n" \
+"                       wants to run 'reboot' at this point to cause the system to reboot.\n" \
+"                       Finally the 'shutdown' action specifies the actions to taken when\n" \
+"                       init is told to reboot.  Unmounting filesystems and disabling swap\n" \
+"                       is a very good here\n" \
+"\n" \
+"               Run repeatedly actions:\n" \
+"\n" \
+"                       'respawn' actions are run after the 'once' actions.  When a process\n" \
+"                       started with a 'respawn' action exits, init automatically restarts\n" \
+"                       it.  Unlike sysvinit, BusyBox init does not stop processes from\n" \
+"                       respawning out of control.  The 'askfirst' actions acts just like\n" \
+"                       respawn, except that before running the specified process it\n" \
+"                       displays the line "Please press Enter to activate this console."\n" \
+"                       and then waits for the user to press enter before starting the\n" \
+"                       specified process.\n" \
+"\n" \
+"               Unrecognized actions (like initdefault) will cause init to emit an\n" \
+"               error message, and then go along with its business.  All actions are\n" \
+"               run in the order they appear in /etc/inittab.\n" \
+"\n" \
+"       <process>:\n" \
+"\n" \
+"               Specifies the process to be executed and its command line.\n" \
+"\n" \
+"Example /etc/inittab file:\n" \
+"\n" \
+"       # This is run first except when booting in single-user mode.\n" \
+"       #\n" \
+"       ::sysinit:/etc/init.d/rcS\n" \
+"       \n" \
+"       # /bin/sh invocations on selected ttys\n" \
+"       #\n" \
+"       # Start an "askfirst" shell on the console (whatever that may be)\n" \
+"       ::askfirst:-/bin/sh\n" \
+"       # Start an "askfirst" shell on /dev/tty2-4\n" \
+"       tty2::askfirst:-/bin/sh\n" \
+"       tty3::askfirst:-/bin/sh\n" \
+"       tty4::askfirst:-/bin/sh\n" \
+"       \n" \
+"       # /sbin/getty invocations for selected ttys\n" \
+"       #\n" \
+"       tty4::respawn:/sbin/getty 38400 tty4\n" \
+"       tty5::respawn:/sbin/getty 38400 tty5\n" \
+"       \n" \
+"       \n" \
+"       # Example of how to put a getty on a serial line (for a terminal)\n" \
+"       #\n" \
+"       #::respawn:/sbin/getty -L ttyS0 9600 vt100\n" \
+"       #::respawn:/sbin/getty -L ttyS1 9600 vt100\n" \
+"       #\n" \
+"       # Example how to put a getty on a modem line.\n" \
+"       #::respawn:/sbin/getty 57600 ttyS2\n" \
+"       \n" \
+"       # Stuff to do when restarting the init process\n" \
+"       ::restart:/sbin/init\n" \
+"       \n" \
+"       # Stuff to do before rebooting\n" \
+"       ::ctrlaltdel:/sbin/reboot\n" \
+"       ::shutdown:/bin/umount -a -r\n" \
+"       ::shutdown:/sbin/swapoff -a\n"
+
+#ifdef CONFIG_FEATURE_INSMOD_LOAD_MAP
+  #define USAGE_INSMOD_MAP(a) a
+#else
+  #define USAGE_INSMOD_MAP(a)
+#endif
+#define insmod_trivial_usage \
+        "[OPTION]... MODULE [symbol=value]..."
+#define insmod_full_usage \
+        "Loads the specified kernel modules into the kernel.\n\n" \
+        "Options:\n" \
+        "\t-f\tForce module to load into the wrong kernel version.\n" \
+        "\t-k\tMake module autoclean-able.\n" \
+        "\t-v\tverbose output\n"  \
+        "\t-q\tquiet output\n" \
+        "\t-L\tLock to prevent simultaneous loads of a module\n" \
+        USAGE_INSMOD_MAP("\t-m\tOutput load map to stdout\n") \
+        "\t-o NAME\tSet internal module name to NAME\n" \
+        "\t-x\tdo not export externs"
+
+#define install_trivial_usage \
+        "[-cgmops] [sources] <dest|directory>"
+#define install_full_usage \
+        "Copies files and set attributes\n\n" \
+        "Options:\n" \
+        "\t-c\tcopy the file, default\n" \
+        "\t-d\tcreate directories\n" \
+        "\t-g\tset group ownership\n" \
+        "\t-m\tset permission modes\n" \
+        "\t-o\tset ownership\n" \
+        "\t-p\tpreserve date\n" \
+        "\t-s\tstrip symbol tables"
+
+
+#define install_initd_trivial_usage \
+        ""
+#define install_initd_full_usage \
+        "LSB install_initd init system."
+#define install_initd_example_usage \
+        "$ install_initd start\n"
+
+
+#define ip_trivial_usage \
+        "[ OPTIONS ] { address | link | route | tunnel } { COMMAND | help }"
+#define ip_full_usage \
+        "ip [ OPTIONS ] OBJECT { COMMAND | help }\n" \
+        "where  OBJECT := { link | addr | route | tunnel }\n" \
+        "OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }"
+
+#define ipaddr_trivial_usage \
+        "{ {add|del} IFADDR dev STRING | {show|flush}\n" \
+        "\t\t[ dev STRING ] [ to PREFIX ] }"
+#define ipaddr_full_usage \
+        "ipaddr {add|del} IFADDR dev STRING\n" \
+        "ipaddr {show|flush} [ dev STRING ] [ scope SCOPE-ID ]\n" \
+        "\t\t\t[ to PREFIX ] [ label PATTERN ]\n" \
+        "\t\t\tIFADDR := PREFIX | ADDR peer PREFIX\n" \
+        "\t\t\t[ broadcast ADDR ] [ anycast ADDR ]\n" \
+        "\t\t\t[ label STRING ] [ scope SCOPE-ID ]\n" \
+        "\t\t\tSCOPE-ID := [ host | link | global | NUMBER ]"
+
+#ifdef CONFIG_FEATURE_IPCALC_FANCY
+  #define XUSAGE_IPCALC_FANCY(a) a
+#else
+  #define XUSAGE_IPCALC_FANCY(a)
+#endif
+#define ipcalc_trivial_usage \
+        "[OPTION]... <ADDRESS>[[/]<NETMASK>] [NETMASK]"
+#define ipcalc_full_usage \
+        "Calculate IP network settings from a IP address\n\n" \
+        "Options:\n" \
+        "\t-b\t--broadcast\tDisplay calculated broadcast address.\n" \
+        "\t-n\t--network\tDisplay calculated network address.\n" \
+        "\t-m\t--netmask\tDisplay default netmask for IP." \
+        XUSAGE_IPCALC_FANCY(\
+        "\n\t-p\t--prefix\tDisplay the prefix for IP/NETMASK." \
+        "\t-h\t--hostname\tDisplay first resolved host name.\n" \
+        "\t-s\t--silent\tDon't ever display error messages.")
+
+#define iplink_trivial_usage \
+        "{ set DEVICE { up | down | arp { on | off } | show [ DEVICE ] }"
+#define iplink_full_usage \
+        "iplink set DEVICE { up | down | arp { on | off } |\n" \
+        "\t\t\tdynamic { on | off } |\n" \
+        "\t\t\tmtu MTU }\n" \
+        "\tiplink show [ DEVICE ]"
+
+#define iproute_trivial_usage \
+        "{ list | flush | { add | del | change | append |\n" \
+        "\t\treplace | monitor } ROUTE }"
+#define iproute_full_usage \
+        "iproute { list | flush } SELECTOR\n" \
+        "iproute get ADDRESS [ from ADDRESS iif STRING ]\n" \
+        "\t\t\t[ oif STRING ]  [ tos TOS ]\n" \
+        "\tiproute { add | del | change | append | replace | monitor } ROUTE\n" \
+        "\t\t\tSELECTOR := [ root PREFIX ] [ match PREFIX ] [ proto RTPROTO ]\n" \
+        "\t\t\tROUTE := [ TYPE ] PREFIX [ tos TOS ] [ proto RTPROTO ]"
+
+#define iptunnel_trivial_usage \
+        "{ add | change | del | show } [ NAME ]\n" \
+        "\t\t[ mode { ipip | gre | sit } ]\n" \
+        "\t\t[ remote ADDR ] [ local ADDR ] [ ttl TTL ]"
+#define iptunnel_full_usage \
+        "iptunnel { add | change | del | show } [ NAME ]\n" \
+        "\t\t\t[ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]\n" \
+        "\t\t\t[ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n" \
+        "\t\t\t[ ttl TTL ] [ tos TOS ] [ [no]pmtudisc ] [ dev PHYS_DEV ]"
+
+#define kill_trivial_usage \
+        "[-signal] process-id [process-id ...]"
+#define kill_full_usage \
+        "Send a signal (default is SIGTERM) to the specified process(es).\n\n"\
+        "Options:\n" \
+        "\t-l\tList all signal names and numbers."
+#define kill_example_usage \
+        "$ ps | grep apache\n" \
+        "252 root     root     S [apache]\n" \
+        "263 www-data www-data S [apache]\n" \
+        "264 www-data www-data S [apache]\n" \
+        "265 www-data www-data S [apache]\n" \
+        "266 www-data www-data S [apache]\n" \
+        "267 www-data www-data S [apache]\n" \
+        "$ kill 252\n"
+
+#define killall_trivial_usage \
+        "[-q] [-signal] process-name [process-name ...]"
+#define killall_full_usage \
+        "Send a signal (default is SIGTERM) to the specified process(es).\n\n"\
+        "Options:\n" \
+        "\t-l\tList all signal names and numbers.\n"\
+        "\t-q\tDo not complain if no processes were killed."
+#define killall_example_usage \
+        "$ killall apache\n"
+
+#define killproc_trivial_usage \
+        ""
+#define killproc_full_usage \
+        "LSB killproc."
+#define killproc_example_usage \
+        "$ killproc 5\n"
+
+
+#define klogd_trivial_usage \
+        "[-c n] [-n]"
+#define klogd_full_usage \
+        "Kernel logger.\n"\
+        "Options:\n"\
+        "\t-c n\tSets the default log level of console messages to n.\n"\
+        "\t-n\tRun as a foreground process."
+
+#define length_trivial_usage \
+        "STRING"
+#define length_full_usage \
+        "Prints out the length of the specified STRING."
+#define length_example_usage \
+        "$ length Hello\n" \
+        "5\n"
+
+#define linuxrc_trivial_usage \
+        ""
+#define linuxrc_full_usage \
+        "linuxrc pre boot."
+#define linuxrc_example_usage \
+        "$ linuxrc\n"
+
+
+#define ln_trivial_usage \
+        "[OPTION] TARGET... LINK_NAME|DIRECTORY"
+#define ln_full_usage \
+        "Create a link named LINK_NAME or DIRECTORY to the specified TARGET\n"\
+        "\nYou may use '--' to indicate that all following arguments are non-options.\n\n" \
+        "Options:\n" \
+        "\t-s\tmake symbolic links instead of hard links\n" \
+        "\t-f\tremove existing destination files\n" \
+        "\t-n\tno dereference symlinks - treat like normal file"
+#define ln_example_usage \
+        "$ ln -s BusyBox /tmp/ls\n" \
+        "$ ls -l /tmp/ls\n" \
+        "lrwxrwxrwx    1 root     root            7 Apr 12 18:39 ls -> BusyBox*\n"
+
+#define loadfont_trivial_usage \
+        "< font"
+#define loadfont_full_usage \
+        "Loads a console font from standard input."
+#define loadfont_example_usage \
+        "$ loadfont < /etc/i18n/fontname\n"
+
+#define loadkmap_trivial_usage \
+        "< keymap"
+#define loadkmap_full_usage \
+        "Loads a binary keyboard translation table from standard input."
+#define loadkmap_example_usage \
+        "$ loadkmap < /etc/i18n/lang-keymap\n"
+
+#define local_fs_trivial_usage \
+        ""
+#define local_fs_full_usage \
+        "LSB local_fs init system."
+#define local_fs_example_usage \
+        "$ local_fs start\n"
+
+
+#define log_failure_msg_trivial_usage \
+        ""
+#define log_failure_msg_full_usage \
+        "LSB log_failure_msg."
+#define log_failure_msg_example_usage \
+        "$ log_failure_msg ""\n"
+
+
+#define log_success_msg_trivial_usage \
+        ""
+#define log_success_msg_full_usage \
+        "LSB log_success_msg."
+#define log_success_msg_example_usage \
+        "$ log_success_msg ""\n"
+
+
+#define log_warning_msg_trivial_usage \
+        ""
+#define log_warning_msg_full_usage \
+        "LSB log_warning_msg."
+#define log_warning_msg_example_usage \
+        "$ log_warning_msg ""\n"
+
+
+#define logger_trivial_usage \
+        "[OPTION]... [MESSAGE]"
+#define logger_full_usage \
+        "Write MESSAGE to the system log.  If MESSAGE is omitted, log stdin.\n\n" \
+        "Options:\n" \
+        "\t-s\tLog to stderr as well as the system log.\n" \
+        "\t-t TAG\tLog using the specified tag (defaults to user name).\n" \
+        "\t-p PRIORITY\tEnter the message with the specified priority.\n" \
+        "\t\tThis may be numerical or a ``facility.level'' pair."
+#define logger_example_usage \
+        "$ logger "hello"\n"
+
+#define login_trivial_usage \
+        "[OPTION]... [username] [ENV=VAR ...]"
+#define login_full_usage \
+        "Begin a new session on the system\n\n" \
+        "Options:\n" \
+        "\t-f\tDo not authenticate (user already authenticated)\n" \
+        "\t-h\tName of the remote host for this login.\n" \
+        "\t-p\tPreserve environment."
+
+#define logname_trivial_usage \
+        ""
+#define logname_full_usage \
+        "Print the name of the current user."
+#define logname_example_usage \
+        "$ logname\n" \
+        "root\n"
+
+#define logread_trivial_usage \
+        "[OPTION]..."
+#define logread_full_usage \
+        "Shows the messages from syslogd (using circular buffer).\n\n" \
+        "Options:\n" \
+        "\t-f\t\toutput data as the log grows"
+
+#define losetup_trivial_usage \
+        "[OPTION]... LOOPDEVICE FILE\n" \
+        "or: losetup [OPTION]... -d LOOPDEVICE"
+#define losetup_full_usage \
+        "Associate LOOPDEVICE with FILE.\n\n" \
+        "Options:\n" \
+        "\t-d\t\tDisassociate LOOPDEVICE.\n" \
+        "\t-o OFFSET\tStart OFFSET bytes into FILE."
+
+#ifdef CONFIG_FEATURE_LS_TIMESTAMPS
+  #define USAGE_LS_TIMESTAMPS(a) a
+#else
+  #define USAGE_LS_TIMESTAMPS(a)
+#endif
+#ifdef CONFIG_FEATURE_LS_FILETYPES
+  #define USAGE_LS_FILETYPES(a) a
+#else
+  #define USAGE_LS_FILETYPES(a)
+#endif
+#ifdef CONFIG_FEATURE_LS_FOLLOWLINKS
+  #define USAGE_LS_FOLLOWLINKS(a) a
+#else
+  #define USAGE_LS_FOLLOWLINKS(a)
+#endif
+#ifdef CONFIG_FEATURE_LS_RECURSIVE
+  #define USAGE_LS_RECURSIVE(a) a
+#else
+  #define USAGE_LS_RECURSIVE(a)
+#endif
+#ifdef CONFIG_FEATURE_LS_SORTFILES
+  #define USAGE_LS_SORTFILES(a) a
+#else
+  #define USAGE_LS_SORTFILES(a)
+#endif
+#ifdef CONFIG_FEATURE_AUTOWIDTH
+  #define USAGE_AUTOWIDTH(a) a
+#else
+  #define USAGE_AUTOWIDTH(a)
+#endif
+
+#define ls_trivial_usage \
+        "[-1Aa" USAGE_LS_TIMESTAMPS("c") "Cd" USAGE_LS_TIMESTAMPS("e") USAGE_LS_FILETYPES("F") "iln" USAGE_LS_FILETYPES("p") USAGE_LS_FOLLOWLINKS("L") USAGE_LS_RECURSIVE("R") USAGE_LS_SORTFILES("rS") "s" USAGE_AUTOWIDTH("T") USAGE_LS_TIMESTAMPS("tu") USAGE_LS_SORTFILES("v") USAGE_AUTOWIDTH("w") "x" USAGE_LS_SORTFILES("X") USAGE_HUMAN_READABLE("h") USAGE_NOT_HUMAN_READABLE("") "k" USAGE_SELINUX("K") "] [filenames...]"
+#define ls_full_usage \
+        "List directory contents\n\n" \
+        "Options:\n" \
+        "\t-1\tlist files in a single column\n" \
+        "\t-A\tdo not list implied . and ..\n" \
+        "\t-a\tdo not hide entries starting with .\n" \
+        "\t-C\tlist entries by columns\n" \
+        USAGE_LS_TIMESTAMPS("\t-c\twith -l: show ctime\n") \
+        "\t-d\tlist directory entries instead of contents\n" \
+        USAGE_LS_TIMESTAMPS("\t-e\tlist both full date and full time\n") \
+        USAGE_LS_FILETYPES("\t-F\tappend indicator (one of */=@|) to entries\n") \
+        "\t-i\tlist the i-node for each file\n" \
+        "\t-l\tuse a long listing format\n" \
+        "\t-n\tlist numeric UIDs and GIDs instead of names\n" \
+        USAGE_LS_FILETYPES("\t-p\tappend indicator (one of /=@|) to entries\n") \
+        USAGE_LS_FOLLOWLINKS("\t-L\tlist entries pointed to by symbolic links\n") \
+        USAGE_LS_RECURSIVE("\t-R\tlist subdirectories recursively\n") \
+        USAGE_LS_SORTFILES("\t-r\tsort the listing in reverse order\n") \
+        USAGE_LS_SORTFILES("\t-S\tsort the listing by file size\n") \
+        "\t-s\tlist the size of each file, in blocks\n" \
+        USAGE_AUTOWIDTH("\t-T NUM\tassume Tabstop every NUM columns\n") \
+        USAGE_LS_TIMESTAMPS("\t-t\twith -l: show modification time\n") \
+        USAGE_LS_TIMESTAMPS("\t-u\twith -l: show access time\n") \
+        USAGE_LS_SORTFILES("\t-v\tsort the listing by version\n") \
+        USAGE_AUTOWIDTH("\t-w NUM\tassume the terminal is NUM columns wide\n") \
+        "\t-x\tlist entries by lines instead of by columns\n" \
+        USAGE_LS_SORTFILES("\t-X\tsort the listing by extension\n") \
+        USAGE_HUMAN_READABLE( \
+        "\t-h\tprint sizes in human readable format (e.g., 1K 243M 2G )\n") \
+        USAGE_SELINUX("\t-k\tprint security context\n") \
+        USAGE_SELINUX("\t-K\tprint security context in long format\n")
+
+#define lsmod_trivial_usage \
+        ""
+#define lsmod_full_usage \
+        "List the currently loaded kernel modules."
+
+#define makedevs_trivial_usage \
+        "NAME TYPE MAJOR MINOR FIRST LAST [s]"
+#define makedevs_full_usage \
+        "Creates a range of block or character special files\n\n" \
+        "TYPEs include:\n" \
+        "\tb:\tMake a block (buffered) device.\n" \
+        "\tc or u:\tMake a character (un-buffered) device.\n" \
+        "\tp:\tMake a named pipe. MAJOR and MINOR are ignored for named pipes.\n\n" \
+        "FIRST specifies the number appended to NAME to create the first device.\n" \
+        "LAST specifies the number of the last item that should be created.\n" \
+        "If 's' is the last argument, the base device is created as well.\n\n" \
+        "For example:\n" \
+        "\tmakedevs /dev/ttyS c 4 66 2 63   ->  ttyS2-ttyS63\n" \
+        "\tmakedevs /dev/hda b 3 0 0 8 s    ->  hda,hda1-hda8"
+#define makedevs_example_usage \
+        "# makedevs /dev/ttyS c 4 66 2 63\n" \
+        "[creates ttyS2-ttyS63]\n" \
+        "# makedevs /dev/hda b 3 0 0 8 s\n" \
+        "[creates hda,hda1-hda8]\n"
+
+#define man_trivial_usage \
+        "[NAME]"
+#define man_full_usage \
+        "Show documentation for Trinux software."
+#define man_example_usage \
+        "$ man basics\n"
+
+
+#ifdef CONFIG_FEATURE_MD5_SHA1_SUM_CHECK
+#define USAGE_MD5_SHA1_SUM_CHECK(a) a
+#else
+#define USAGE_MD5_SHA1_SUM_CHECK(a)
+#endif
+
+#define md5sum_trivial_usage \
+        "[OPTION] [FILEs...]" \
+        USAGE_MD5_SHA1_SUM_CHECK("\n   or: md5sum [OPTION] -c [FILE]")
+#define md5sum_full_usage \
+        "Print" USAGE_MD5_SHA1_SUM_CHECK(" or check") " MD5 checksums.\n\n" \
+        "Options:\n" \
+        "With no FILE, or when FILE is -, read standard input." \
+        USAGE_MD5_SHA1_SUM_CHECK("\n\n" \
+        "\t-c\tcheck MD5 sums against given list\n" \
+        "\nThe following two options are useful only when verifying checksums:\n" \
+        "\t-s\tdon't output anything, status code shows success\n" \
+        "\t-w\twarn about improperly formated MD5 checksum lines")
+#define md5sum_example_usage \
+        "$ md5sum < busybox\n" \
+        "6fd11e98b98a58f64ff3398d7b324003\n" \
+        "$ md5sum busybox\n" \
+        "6fd11e98b98a58f64ff3398d7b324003  busybox\n" \
+        "$ md5sum -c -\n" \
+        "6fd11e98b98a58f64ff3398d7b324003  busybox\n" \
+        "busybox: OK\n" \
+        "^D\n"
+
+#define mesg_trivial_usage \
+        "[y|n]"
+#define mesg_full_usage \
+        "mesg controls write access to your terminal\n" \
+        "\ty\tAllow write access to your terminal.\n" \
+        "\tn\tDisallow write access to your terminal.\n"
+
+#define mkdir_trivial_usage \
+        "[OPTION] DIRECTORY..."
+#define mkdir_full_usage \
+        "Create the DIRECTORY(ies) if they do not already exist\n\n" \
+        "Options:\n" \
+        "\t-m\tset permission mode (as in chmod), not rwxrwxrwx - umask\n" \
+        "\t-p\tno error if existing, make parent directories as needed"
+#define mkdir_example_usage \
+        "$ mkdir /tmp/foo\n" \
+        "$ mkdir /tmp/foo\n" \
+        "/tmp/foo: File exists\n" \
+        "$ mkdir /tmp/foo/bar/baz\n" \
+        "/tmp/foo/bar/baz: No such file or directory\n" \
+        "$ mkdir -p /tmp/foo/bar/baz\n"
+
+#define mkfifo_trivial_usage \
+        "[OPTIONS] name"
+#define mkfifo_full_usage \
+        "Creates a named pipe (identical to 'mknod name p')\n\n" \
+        "Options:\n" \
+        "\t-m\tcreate the pipe using the specified mode (default a=rw)"
+
+#define mkfs_minix_trivial_usage \
+        "[-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]"
+#define mkfs_minix_full_usage \
+        "Make a MINIX filesystem.\n\n" \
+        "Options:\n" \
+        "\t-c\t\tCheck the device for bad blocks\n" \
+        "\t-n [14|30]\tSpecify the maximum length of filenames\n" \
+        "\t-i INODES\tSpecify the number of inodes for the filesystem\n" \
+        "\t-l FILENAME\tRead the bad blocks list from FILENAME\n" \
+        "\t-v\t\tMake a Minix version 2 filesystem"
+
+#define mknod_trivial_usage \
+        "[OPTIONS] NAME TYPE MAJOR MINOR"
+#define mknod_full_usage \
+        "Create a special file (block, character, or pipe).\n\n" \
+        "Options:\n" \
+        "\t-m\tcreate the special file using the specified mode (default a=rw)\n\n" \
+        "TYPEs include:\n" \
+        "\tb:\tMake a block (buffered) device.\n" \
+        "\tc or u:\tMake a character (un-buffered) device.\n" \
+        "\tp:\tMake a named pipe. MAJOR and MINOR are ignored for named pipes."
+#define mknod_example_usage \
+        "$ mknod /dev/fd0 b 2 0\n" \
+        "$ mknod -m 644 /tmp/pipe p\n"
+
+#define mkswap_trivial_usage \
+        "[-c] [-v0|-v1] device [block-count]"
+#define mkswap_full_usage \
+        "Prepare a disk partition to be used as a swap partition.\n\n" \
+        "Options:\n" \
+        "\t-c\t\tCheck for read-ability.\n" \
+        "\t-v0\t\tMake version 0 swap [max 128 Megs].\n" \
+        "\t-v1\t\tMake version 1 swap [big!] (default for kernels >\n\t\t\t2.1.117).\n" \
+        "\tblock-count\tNumber of block to use (default is entire partition)."
+
+#define mktemp_trivial_usage \
+        "[-dq] TEMPLATE"
+#define mktemp_full_usage \
+        "Creates a temporary file with its name based on TEMPLATE.\n" \
+        "TEMPLATE is any name with six `Xs' (i.e., /tmp/temp.XXXXXX).\n\n" \
+        "Options:\n" \
+        "\t-d\t\tMake a directory instead of a file\n" \
+        "\t-q\t\tFail silently if an error occurs"
+#define mktemp_example_usage \
+        "$ mktemp /tmp/temp.XXXXXX\n" \
+        "/tmp/temp.mWiLjM\n" \
+        "$ ls -la /tmp/temp.mWiLjM\n" \
+        "-rw-------    1 andersen andersen        0 Apr 25 17:10 /tmp/temp.mWiLjM\n"
+
+#define modprobe_trivial_usage \
+        "[-knqrsv] [MODULE ...]"
+#define modprobe_full_usage \
+        "Used for high level module loading and unloading.\n\n" \
+        "Options:\n" \
+        "\t-k\tMake module autoclean-able.\n" \
+        "\t-n\tJust show what would be done.\n" \
+        "\t-q\tQuiet output.\n" \
+        "\t-r\tRemove module (stacks) or do autoclean.\n" \
+        "\t-s\tReport via syslog instead of stderr.\n" \
+        "\t-v\tVerbose output."
+#define modprobe_example_usage \
+        "$ modprobe cdrom\n"
+
+#define more_trivial_usage \
+        "[FILE ...]"
+#define more_full_usage \
+        "More is a filter for viewing FILE one screenful at a time."
+#define more_example_usage \
+        "$ dmesg | more\n"
+
+#ifdef CONFIG_FEATURE_MOUNT_LOOP
+  #define USAGE_MOUNT_LOOP(a) a
+#else
+  #define USAGE_MOUNT_LOOP(a)
+#endif
+#ifdef CONFIG_FEATURE_MTAB_SUPPORT
+  #define USAGE_MTAB(a) a
+#else
+  #define USAGE_MTAB(a)
+#endif
+#define mount_trivial_usage \
+        "[flags] DEVICE NODE [-o options,more-options]"
+#define mount_full_usage \
+        "Mount a filesystem.  Autodetection of filesystem type requires the\n" \
+        "/proc filesystem be already mounted.\n\n" \
+        "Flags:\n"  \
+        "\t-a:\t\tMount all filesystems in fstab.\n" \
+        USAGE_MTAB( \
+        "\t-f:\t\t\"Fake\" Add entry to mount table but don't mount it.\n" \
+        "\t-n:\t\tDon't write a mount table entry.\n" \
+        ) \
+        "\t-o option:\tOne of many filesystem options, listed below.\n" \
+        "\t-r:\t\tMount the filesystem read-only.\n" \
+        "\t-t fs-type:\tSpecify the filesystem type.\n" \
+        "\t-w:\t\tMount for reading and writing (default).\n" \
+        "\n" \
+        "Options for use with the \"-o\" flag:\n" \
+        "\tasync/sync:\tWrites are asynchronous / synchronous.\n" \
+        "\tatime/noatime:\tEnable / disable updates to inode access times.\n" \
+        "\tdev/nodev:\tAllow use of special device files / disallow them.\n" \
+        "\texec/noexec:\tAllow use of executable files / disallow them.\n" \
+        USAGE_MOUNT_LOOP( \
+        "\tloop:\t\tMounts a file via loop device.\n" \
+        ) \
+        "\tsuid/nosuid:\tAllow set-user-id-root programs / disallow them.\n" \
+        "\tremount:\tRe-mount a mounted filesystem, changing its flags.\n" \
+        "\tro/rw:\t\tMount for read-only / read-write.\n" \
+        "\tbind:\t\tUse the linux 2.4.x \"bind\" feature.\n" \
+        "\nThere are EVEN MORE flags that are specific to each filesystem.\n" \
+        "You'll have to see the written documentation for those filesystems."
+#define mount_example_usage \
+        "$ mount\n" \
+        "/dev/hda3 on / type minix (rw)\n" \
+        "proc on /proc type proc (rw)\n" \
+        "devpts on /dev/pts type devpts (rw)\n" \
+        "$ mount /dev/fd0 /mnt -t msdos -o ro\n" \
+        "$ mount /tmp/diskimage /opt -t ext2 -o loop\n"
+
+#define mt_trivial_usage \
+        "[-f device] opcode value"
+#define mt_full_usage \
+        "Control magnetic tape drive operation\n" \
+        "\nAvailable Opcodes:\n\n" \
+        "bsf bsfm bsr bss datacompression drvbuffer eof eom erase\n" \
+        "fsf fsfm fsr fss load lock mkpart nop offline ras1 ras2\n" \
+        "ras3 reset retension rewind rewoffline seek setblk setdensity\n" \
+        "setpart tell unload unlock weof wset"
+
+#define mv_trivial_usage \
+        "[OPTION]... SOURCE DEST\n" \
+        "or: mv [OPTION]... SOURCE... DIRECTORY"
+#define mv_full_usage \
+        "Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY.\n\n" \
+        "Options:\n" \
+        "\t-f\tdon't prompt before overwriting\n" \
+        "\t-i\tinteractive, prompt before overwrite"
+#define mv_example_usage \
+        "$ mv /tmp/foo /bin/bar\n"
+
+#define nameif_trivial_usage \
+        "[-s] [-c FILE] [{IFNAME MACADDR}]"
+#define nameif_full_usage \
+        "Nameif renaming network interface while it in the down state.\n\n" \
+        "Options:\n" \
+        "\t-c FILE\t\tUse configuration file (default is /etc/mactab)\n" \
+        "\t-s\t\tUse syslog (LOCAL0 facility).\n" \
+        "\tIFNAME MACADDR\tnew_interface_name interface_mac_address"
+#define nameif_example_usage \
+        "$ nameif -s dmz0 00:A0:C9:8C:F6:3F\n" \
+        " or\n" \
+        "$ nameif -c /etc/my_mactab_file\n" \
+
+#define nc_trivial_usage \
+        "[OPTIONS] [IP] [port]"
+#define nc_full_usage \
+        "Netcat opens a pipe to IP:port\n\n" \
+        "Options:\n" \
+        "\t-l\t\tlisten mode, for inbound connects\n" \
+        "\t-p PORT\t\tlocal port number\n" \
+        "\t-i SECS\t\tdelay interval for lines sent\n" \
+        "\t-e PROG\t\tprogram to exec after connect (dangerous!)"
+#define nc_example_usage \
+        "$ nc foobar.somedomain.com 25\n" \
+        "220 foobar ESMTP Exim 3.12 #1 Sat, 15 Apr 2000 00:03:02 -0600\n" \
+        "help\n" \
+        "214-Commands supported:\n" \
+        "214-    HELO EHLO MAIL RCPT DATA AUTH\n" \
+        "214     NOOP QUIT RSET HELP\n" \
+        "quit\n" \
+        "221 foobar closing connection\n"
+
+#define netstat_trivial_usage \
+        "[-laenrtuwx]"
+#define netstat_full_usage \
+        "Netstat displays Linux networking information.\n\n" \
+        "Options:\n" \
+        "\t-l display listening server sockets\n" \
+        "\t-a display all sockets (default: connected)\n" \
+        "\t-e display other/more information\n" \
+        "\t-n don't resolve names\n" \
+        "\t-r display routing table\n" \
+        "\t-t tcp sockets\n" \
+        "\t-u udp sockets\n" \
+        "\t-w raw sockets\n" \
+        "\t-x unix sockets"
+
+
+#define network_trivial_usage \
+        ""
+#define network_full_usage \
+        "LSB network init system."
+#define network_example_usage \
+        "$ network start\n"
+
+
+#define nslookup_trivial_usage \
+        "[HOST] [SERVER]"
+#define nslookup_full_usage \
+        "Queries the nameserver for the IP address of the given HOST\n" \
+        "optionally using a specified DNS server"
+#define nslookup_example_usage \
+        "$ nslookup localhost\n" \
+        "Server:     default\n" \
+        "Address:    default\n" \
+        "\n" \
+        "Name:       debian\n" \
+        "Address:    127.0.0.1\n"
+
+#define od_trivial_usage \
+        "[-aBbcDdeFfHhIiLlOovXx] [FILE]"
+#define od_full_usage \
+        "Write an unambiguous representation, octal bytes by default, of FILE\n"\
+        "to standard output.  With no FILE, or when FILE is -, read standard input."
+
+#define openvt_trivial_usage \
+        "<vtnum> <COMMAND> [ARGS...]"
+#define openvt_full_usage \
+        "Start a command on a new virtual terminal"
+#define openvt_example_usage \
+        "openvt 2 /bin/ash\n"
+
+#ifdef CONFIG_FEATURE_SHA1_PASSWORDS
+  #define PASSWORD_ALG_TYPES(a) a
+#else
+  #define PASSWORD_ALG_TYPES(a)
+#endif
+#define passwd_trivial_usage \
+        "[OPTION] [name]"
+#define passwd_full_usage \
+        "Change a user password. If no name is specified,\n" \
+        "changes the password for the current user.\n" \
+        "Options:\n" \
+        "\t-a\tDefine which algorithm shall be used for the password.\n" \
+        "\t\t\t(Choices: des, md5" \
+        PASSWORD_ALG_TYPES(", sha1") \
+        ")\n\t-d\tDelete the password for the specified user account.\n" \
+        "\t-l\tLocks (disables) the specified user account.\n" \
+        "\t-u\tUnlocks (re-enables) the specified user account."
+
+#define patch_trivial_usage \
+        "[-p<num>]"
+#define patch_full_usage \
+        "[-p<num>]"
+#define patch_example_usage \
+        "$ patch -p1 <example.diff"
+
+#define pidof_trivial_usage \
+        "process-name [OPTION] [process-name ...]"
+#define pidof_full_usage \
+        "Lists the PIDs of all processes with names that match the\n" \
+        "names on the command line.\n" \
+        "Options:\n" \
+        "\t-s\t\tdisplay only a single PID."
+#define pidof_example_usage \
+        "$ pidof init\n" \
+        "1\n"
+
+#define pidofproc_trivial_usage \
+        ""
+#define pidofproc_full_usage \
+        "LSB pidofproc."
+#define pidofproc_example_usage \
+        "$ pidofproc 5\n"
+
+
+#ifndef CONFIG_FEATURE_FANCY_PING
+#define ping_trivial_usage "host"
+#define ping_full_usage    "Send ICMP ECHO_REQUEST packets to network hosts"
+#else
+#define ping_trivial_usage \
+        "[OPTION]... host"
+#define ping_full_usage \
+        "Send ICMP ECHO_REQUEST packets to network hosts.\n\n" \
+        "Options:\n" \
+        "\t-c COUNT\tSend only COUNT pings.\n" \
+        "\t-s SIZE\t\tSend SIZE data bytes in packets (default=56).\n" \
+        "\t-q\t\tQuiet mode, only displays output at start\n" \
+        "\t\t\tand when finished."
+#endif
+#define ping_example_usage \
+        "$ ping localhost\n" \
+        "PING slag (127.0.0.1): 56 data bytes\n" \
+        "64 bytes from 127.0.0.1: icmp_seq=0 ttl=255 time=20.1 ms\n" \
+        "\n" \
+        "--- debian ping statistics ---\n" \
+        "1 packets transmitted, 1 packets received, 0% packet loss\n" \
+        "round-trip min/avg/max = 20.1/20.1/20.1 ms\n"
+
+#ifndef CONFIG_FEATURE_FANCY_PING6
+#define ping6_trivial_usage "host"
+#define ping6_full_usage    "Send ICMP ECHO_REQUEST packets to network hosts"
+#else
+#define ping6_trivial_usage \
+        "[OPTION]... host"
+#define ping6_full_usage \
+        "Send ICMP ECHO_REQUEST packets to network hosts.\n\n" \
+        "Options:\n" \
+        "\t-c COUNT\tSend only COUNT pings.\n" \
+        "\t-s SIZE\t\tSend SIZE data bytes in packets (default=56).\n" \
+        "\t-q\t\tQuiet mode, only displays output at start\n" \
+        "\t\t\tand when finished."
+#endif
+#define ping6_example_usage \
+        "$ ping6 ip6-localhost\n" \
+        "PING ip6-localhost (::1): 56 data bytes\n" \
+        "64 bytes from ::1: icmp6_seq=0 ttl=64 time=20.1 ms\n" \
+        "\n" \
+        "--- ip6-localhost ping statistics ---\n" \
+        "1 packets transmitted, 1 packets received, 0% packet loss\n" \
+        "round-trip min/avg/max = 20.1/20.1/20.1 ms\n"
+
+#define pivot_root_trivial_usage \
+        "NEW_ROOT PUT_OLD"
+#define pivot_root_full_usage \
+        "Move the current root file system to PUT_OLD and make NEW_ROOT\n" \
+        "the new root file system."
+
+#define poweroff_trivial_usage \
+        "[-d<delay>]"
+#define poweroff_full_usage \
+        "Halt the system and request that the kernel shut off the power.\n" \
+        "Options:\n" \
+        "\t-d\t\tdelay interval for shutting off."
+
+#define printf_trivial_usage \
+        "FORMAT [ARGUMENT...]"
+#define printf_full_usage \
+        "Formats and prints ARGUMENT(s) according to FORMAT,\n" \
+        "Where FORMAT controls the output exactly as in C printf."
+#define printf_example_usage \
+        "$ printf "Val=%d\\n" 5\n" \
+        "Val=5\n"
+
+#ifdef CONFIG_SELINUX
+#define USAGE_NONSELINUX(a)
+#else
+#define USAGE_NONSELINUX(a) a
+#endif
+
+#define ps_trivial_usage \
+        ""
+#define ps_full_usage \
+        "Report process status\n" \
+        USAGE_NONSELINUX("\n\tThis version of ps accepts no options.") \
+        USAGE_SELINUX("\nOptions:\n\t-c\tshow SE Linux context")
+
+#define ps_example_usage \
+        "$ ps\n" \
+        "  PID  Uid      Gid State Command\n" \
+        "    1 root     root     S init\n" \
+        "    2 root     root     S [kflushd]\n" \
+        "    3 root     root     S [kupdate]\n" \
+        "    4 root     root     S [kpiod]\n" \
+        "    5 root     root     S [kswapd]\n" \
+        "  742 andersen andersen S [bash]\n" \
+        "  743 andersen andersen S -bash\n" \
+        "  745 root     root     S [getty]\n" \
+        " 2990 andersen andersen R ps\n"
+
+#define pwd_trivial_usage \
+        ""
+#define pwd_full_usage \
+        "Print the full filename of the current working directory."
+#define pwd_example_usage \
+        "$ pwd\n" \
+        "/root\n"
+
+#define rc_trivial_usage \
+        ""
+#define rc_full_usage \
+        "LSB rc init system."
+#define rc_example_usage \
+        "$ rc 5\n"
+
+
+#define rcS_trivial_usage \
+        ""
+#define rcS_full_usage \
+        "sysinit for inittab."
+#define rcS_example_usage \
+        "$ rcS\n"
+
+
+#define rdate_trivial_usage \
+        "[-sp] HOST"
+#define rdate_full_usage \
+        "Get and possibly set the system date and time from a remote HOST.\n\n" \
+        "Options:\n" \
+        "\t-s\tSet the system date and time (default).\n" \
+        "\t-p\tPrint the date and time."
+
+#define readlink_trivial_usage \
+        ""
+#define readlink_full_usage \
+        "Displays the value of a symbolic link."
+
+#define realpath_trivial_usage \
+        "pathname  ..."
+#define realpath_full_usage \
+        "Returns the absolute pathnames of given argument."
+
+#define reboot_trivial_usage \
+        "[-d<delay>]"
+#define reboot_full_usage \
+        "Reboot the system.\n" \
+        "Options:\n" \
+        "\t-d\t\tdelay interval for rebooting."
+
+#define remote_fs_trivial_usage \
+        ""
+#define remote_fs_full_usage \
+        "LSB remote_fs init system."
+#define remote_fs_example_usage \
+        "$ remote_fs start\n"
+
+
+#define remove_initd_trivial_usage \
+        ""
+#define remove_initd_full_usage \
+        "LSB remove_initd init system."
+#define remove_initd_example_usage \
+        "$ remove_initd start\n"
+
+
+#define renice_trivial_usage \
+        "priority pid [pid ...]"
+#define renice_full_usage \
+        "Changes priority of running processes. Allowed priorities range\n" \
+        "from 20 (the process runs only when nothing else is running) to 0\n" \
+        "(default priority) to -20 (almost nothing else ever gets to run)."
+
+#define reset_trivial_usage \
+        ""
+#define reset_full_usage \
+        "Resets the screen."
+
+#define rm_trivial_usage \
+        "[OPTION]... FILE..."
+#define rm_full_usage \
+        "Remove (unlink) the FILE(s).  You may use '--' to\n" \
+        "indicate that all following arguments are non-options.\n\n" \
+        "Options:\n" \
+        "\t-i\t\talways prompt before removing each destination\n" \
+        "\t-f\t\tremove existing destinations, never prompt\n" \
+        "\t-r or -R\tremove the contents of directories recursively"
+#define rm_example_usage \
+        "$ rm -rf /tmp/foo\n"
+
+#define rmdir_trivial_usage \
+        "[OPTION]... DIRECTORY..."
+#define rmdir_full_usage \
+        "Remove the DIRECTORY(ies), if they are empty."
+#define rmdir_example_usage \
+        "# rmdir /tmp/foo\n"
+
+#define rmmod_trivial_usage \
+        "[OPTION]... [MODULE]..."
+#define rmmod_full_usage \
+        "Unloads the specified kernel modules from the kernel.\n\n" \
+        "Options:\n" \
+        "\t-a\tRemove all unused modules (recursively)"
+#define rmmod_example_usage \
+        "$ rmmod tulip\n"
+
+#ifdef CONFIG_FEATURE_IPV6
+  #define USAGE_ROUTE_IPV6(a) a
+#else
+  #define USAGE_ROUTE_IPV6(a) "\t"
+#endif
+
+
+#define route_trivial_usage \
+        "[{add|del|delete}]"
+#define route_full_usage \
+        "Edit the kernel's routing tables.\n\n" \
+        "Options:\n" \
+        "\t-n\t\tDont resolve names.\n" \
+        "\t-e\t\tDisplay other/more information.\n" \
+        "\t-A inet" USAGE_ROUTE_IPV6("{6}") "\tSelect address family."
+
+#define rpm_trivial_usage \
+        "-i -q[ildc]p package.rpm"
+#define rpm_full_usage \
+        "Manipulates RPM packages" \
+        "\n\nOptions:" \
+        "\n\t-i Install package" \
+        "\n\t-q Query package" \
+        "\n\t-p Query uninstalled package" \
+        "\n\t-i Show information" \
+        "\n\t-l List contents" \
+        "\n\t-d List documents" \
+        "\n\t-c List config files"
+
+#define rpm2cpio_trivial_usage \
+        "package.rpm"
+#define rpm2cpio_full_usage \
+        "Outputs a cpio archive of the rpm file."
+
+#define run_parts_trivial_usage \
+        "[-t] [-a ARG] [-u MASK] DIRECTORY"
+#define run_parts_full_usage \
+        "Run a bunch of scripts in a directory.\n\n" \
+        "Options:\n" \
+        "\t-t\tPrints what would be run, but does not actually run anything.\n" \
+        "\t-a ARG\tPass ARG as an argument for every program invoked.\n" \
+        "\t-u MASK\tSet the umask to MASK before executing every program."
+
+#define rx_trivial_usage \
+        "FILE"
+#define rx_full_usage \
+        "Receive a file using the xmodem protocol."
+#define rx_example_usage \
+        "$ rx /tmp/foo\n"
+
+#define sed_trivial_usage \
+        "[-efinr] pattern [files...]"
+#define sed_full_usage \
+        "Options:\n" \
+        "\t-e script\tadd the script to the commands to be executed\n" \
+        "\t-f scriptfile\tadd script-file contents to the\n" \
+            "\t\t\tcommands to be executed\n" \
+        "\t-i\t\tedit files in-place\n" \
+        "\t-n\t\tsuppress automatic printing of pattern space\n" \
+        "\t-r\t\tuse extended regular expression syntax\n" \
+        "\n" \
+        "If no -e or -f is given, the first non-option argument is taken as the sed\n"\
+        "script to interpret. All remaining arguments are names of input files; if no\n"\
+        "input files are specified, then the standard input is read.  Source files\n" \
+        "will not be modified unless -i option is given."
+
+#define sed_example_usage \
+        "$ echo "foo" | sed -e 's/f[a-zA-Z]o/bar/g'\n" \
+        "bar\n"
+
+#define seq_trivial_usage \
+        "[first [increment]] last"
+#define seq_full_usage \
+        "Print numbers from FIRST to LAST, in steps of INCREMENT.\n" \
+        "FIRST, INCREMENT default to 1\n" \
+        "Arguments:\n" \
+        "\tLAST\n" \
+        "\tFIRST\tLAST\n" \
+        "\tFIRST\tINCREMENT\tLAST"
+
+#define setkeycodes_trivial_usage \
+        "SCANCODE KEYCODE ..."
+#define setkeycodes_full_usage \
+        "Set entries into the kernel's scancode-to-keycode map,\n" \
+        "allowing unusual keyboards to generate usable keycodes.\n\n" \
+        "SCANCODE may be either xx or e0xx (hexadecimal),\n" \
+        "and KEYCODE is given in decimal"
+#define setkeycodes_example_usage \
+        "$ setkeycodes e030 127\n"
+
+#define lash_trivial_usage \
+        "[FILE]...\n" \
+        "or: sh -c command [args]..."
+#define lash_full_usage \
+        "The BusyBox LAme SHell (command interpreter)"
+#define lash_notes_usage \
+        "This command does not yet have proper documentation.\n\n" \
+        "Use lash just as you would use any other shell.  It properly handles pipes,\n" \
+        "redirects, job control, can be used as the shell for scripts, and has a\n" \
+        "sufficient set of builtins to do what is needed.  It does not (yet) support\n" \
+        "Bourne Shell syntax.  If you need things like "if-then-else", "while", and such\n" \
+        "use ash or bash.  If you just need a very simple and extremely small shell,\n" \
+        "this will do the job."
+
+#define last_trivial_usage \
+        ""
+#define last_full_usage \
+        "Shows listing of the last users that logged into the system"
+
+#define sha1sum_trivial_usage \
+        "[OPTION] [FILEs...]" \
+        USAGE_MD5_SHA1_SUM_CHECK("\n   or: sha1sum [OPTION] -c [FILE]")
+#define sha1sum_full_usage \
+        "Print" USAGE_MD5_SHA1_SUM_CHECK(" or check") " SHA1 checksums.\n\n" \
+        "Options:\n" \
+        "With no FILE, or when FILE is -, read standard input." \
+        USAGE_MD5_SHA1_SUM_CHECK("\n\n" \
+        "\t-c\tcheck SHA1 sums against given list\n" \
+        "\nThe following two options are useful only when verifying checksums:\n" \
+        "\t-s\tdon't output anything, status code shows success\n" \
+        "\t-w\twarn about improperly formated SHA1 checksum lines")
+
+#ifdef CONFIG_FEATURE_FANCY_SLEEP
+  #define USAGE_FANCY_SLEEP(a) a
+  #define USAGE_NOT_FANCY_SLEEP(a)
+#else
+  #define USAGE_FANCY_SLEEP(a)
+  #define USAGE_NOT_FANCY_SLEEP(a) a
+#endif
+
+#define sleep_trivial_usage \
+        USAGE_FANCY_SLEEP("[") "N" USAGE_FANCY_SLEEP("]...")
+#define sleep_full_usage \
+        USAGE_NOT_FANCY_SLEEP("Pause for N seconds.") \
+        USAGE_FANCY_SLEEP( \
+        "Pause for a time equal to the total of the args given, where each arg can\n" \
+        "\t\thave an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays.")
+#define sleep_example_usage \
+        "$ sleep 2\n" \
+        "[2 second delay results]\n" \
+        USAGE_FANCY_SLEEP("$ sleep 1d 3h 22m 8s\n" \
+        "[98528 second delay results]\n")
+
+#ifdef CONFIG_FEATURE_SORT_UNIQUE
+  #define USAGE_SORT_UNIQUE(a) a
+#else
+  #define USAGE_SORT_UNIQUE(a)
+#endif
+#ifdef CONFIG_FEATURE_SORT_REVERSE
+  #define USAGE_SORT_REVERSE(a) a
+#else
+  #define USAGE_SORT_REVERSE(a)
+#endif
+#define sort_trivial_usage \
+        "[-n" USAGE_SORT_REVERSE("r") USAGE_SORT_UNIQUE("u") "] [FILE]..."
+#define sort_full_usage \
+        "Sorts lines of text in the specified files\n\n"\
+        "Options:\n" \
+        USAGE_SORT_UNIQUE("\t-u\tsuppress duplicate lines\n") \
+        USAGE_SORT_REVERSE("\t-r\tsort in reverse order\n") \
+        "\t-n\tsort numerics"
+#define sort_example_usage \
+        "$ echo -e \"e\\nf\\nb\\nd\\nc\\na\" | sort\n" \
+        "a\n" \
+        "b\n" \
+        "c\n" \
+        "d\n" \
+        "e\n" \
+        "f\n"
+
+#define start_daemon_trivial_usage \
+        ""
+#define start_daemon_full_usage \
+        "LSB start_daemon."
+#define start_daemon_example_usage \
+        "$ start_daemon 5\n"
+
+
+#define start_stop_daemon_trivial_usage \
+        "[OPTIONS] [--start|--stop] ... [-- arguments...]\n"
+#define start_stop_daemon_full_usage \
+        "Program to start and stop services."\
+        "\n\nOptions:"\
+        "\n\t-S|--start\t\t\tstart"\
+        "\n\t-K|--stop\t\t\tstop"\
+        "\n\t-a|--startas <pathname>\t\tstarts process specified by pathname"\
+        "\n\t-b|--background\t\t\tforce process into background"\
+        "\n\t-u|--user <username>|<uid>\tstop this user's processes"\
+        "\n\t-x|--exec <executable>\t\tprogram to either start or check"\
+        "\n\t-m|--make-pidfile <filename>\tcreate the -p file and enter pid in it"\
+        "\n\t-n|--name <process-name>\tstop processes with this name"\
+        "\n\t-p|--pidfile <pid-file>\t\tsave or load pid using a pid-file"\
+        "\n\t-q|--quiet\t\t\tbe quiet" \
+        "\n\t-s|--signal <signal>\t\tsignal to send (default TERM)"
+
+#define strings_trivial_usage \
+        "[-afo] [-n length] [file ... ]"
+#define strings_full_usage \
+        "Display printable strings in a binary file." \
+        "\n\nOptions:" \
+        "\n\t-a\tScan the whole files (this is the default)."\
+        "\n\t-f\tPrecede each string with the name of the file where it was found." \
+        "\n\t-n N\tSpecifies that at least N characters forms a sequence (default 4)" \
+        "\n\t-o\tEach string is preceded by its decimal offset in the file."
+
+#define stty_trivial_usage \
+        "[-a|g] [-F DEVICE] [SETTING]..."
+#define stty_full_usage \
+        "Without arguments, prints baud rate, line discipline," \
+        "\nand deviations from stty sane." \
+        "\n\nOptions:" \
+        "\n\t-F DEVICE\topen device instead of stdin" \
+        "\n\t-a\t\tprint all current settings in human-readable form" \
+        "\n\t-g\t\tprint in stty-readable form" \
+        "\n\t[SETTING]\tsee manpage"
+
+#define su_trivial_usage \
+        "[OPTION]... [-] [username]"
+#define su_full_usage \
+        "Change user id or become root.\n" \
+        "Options:\n" \
+        "\t-p\tPreserve environment"
+
+#define sulogin_trivial_usage \
+        "[OPTION]... [tty-device]"
+#define sulogin_full_usage \
+        "Single user login\n" \
+        "Options:\n" \
+        "\t-f\tDo not authenticate (user already authenticated)\n" \
+        "\t-h\tName of the remote host for this login.\n" \
+        "\t-p\tPreserve environment."
+
+#define swapoff_trivial_usage \
+        "[OPTION] [DEVICE]"
+#define swapoff_full_usage \
+        "Stop swapping virtual memory pages on DEVICE.\n\n" \
+        "Options:\n" \
+        "\t-a\tStop swapping on all swap devices"
+
+#define swapon_trivial_usage \
+        "[OPTION] [DEVICE]"
+#define swapon_full_usage \
+        "Start swapping virtual memory pages on DEVICE.\n\n" \
+        "Options:\n" \
+        "\t-a\tStart swapping on all swap devices"
+
+#define sync_trivial_usage \
+        ""
+#define sync_full_usage \
+        "Write all buffered filesystem blocks to disk."
+
+
+#ifdef CONFIG_FEATURE_ROTATE_LOGFILE
+        #define USAGE_ROTATE_LOGFILE(a) a
+#else
+        #define USAGE_ROTATE_LOGFILE(a)
+#endif
+#ifdef CONFIG_FEATURE_REMOTE_LOG
+  #define USAGE_REMOTE_LOG(a) a
+#else
+  #define USAGE_REMOTE_LOG(a)
+#endif
+#ifdef CONFIG_FEATURE_IPC_SYSLOG
+  #define USAGE_IPC_LOG(a) a
+#else
+  #define USAGE_IPC_LOG(a)
+#endif
+
+#ifdef CONFIG_SYSCTL
+#define sysctl_trivial_usage \
+        "[OPTIONS]... [VALUE]...\n"
+#define sysctl_full_usage
+        "sysctl - configure kernel parameters at runtime\n\n" \
+        "Options:\n" \
+        "\t-n\tUse this option to disable printing of the key name when printing values.\n" \
+        "\t-w\tUse this option when you want to change a sysctl setting.\n" \
+        "\t-p\tLoad in sysctl settings from the file specified or /etc/sysctl.conf if none given.\n" \
+        "\t-a\tDisplay all values currently available.\n" \
+        "\t-A\tDisplay all values currently available in table form."
+#define sysctl_example_usage
+        "sysctl [-n] variable ...\n" \
+        "sysctl [-n] -w variable=value ...\n" \
+        "sysctl [-n] -a\n" \
+        "sysctl [-n] -p <file>\t(default /etc/sysctl.conf)\n" \
+        "sysctl [-n] -A\n"
+#endif
+
+#define syslogd_trivial_usage \
+        "[OPTION]..."
+#define syslogd_full_usage \
+        "Linux system and kernel logging utility.\n" \
+        "Note that this version of syslogd ignores /etc/syslog.conf.\n\n" \
+        "Options:\n" \
+        "\t-m MIN\t\tMinutes between MARK lines (default=20, 0=off)\n" \
+        "\t-n\t\tRun as a foreground process\n" \
+        "\t-O FILE\t\tUse an alternate log file (default=/var/log/messages)\n" \
+        "\t-S\t\tMake logging output smaller." \
+        USAGE_ROTATE_LOGFILE( \
+        "\n\t-s SIZE\t\tMax size (KB) before rotate (default=200KB, 0=off)\n" \
+        "\t-b NUM\t\tNumber of rotated logs to keep (default=1, max=99, 0=purge)") \
+        USAGE_REMOTE_LOG( \
+        "\n\t-R HOST[:PORT]\tLog to IP or hostname on PORT (default PORT=514/UDP)\n" \
+        "\t-L\t\tLog locally and via network logging (default is network only)") \
+        USAGE_IPC_LOG( \
+        "\n\t-C [size(KiB)]\tLog to a circular buffer (read the buffer using logread)")
+#define syslogd_example_usage \
+        "$ syslogd -R masterlog:514\n" \
+        "$ syslogd -R 192.168.1.1:601\n"
+
+
+#ifndef CONFIG_FEATURE_FANCY_TAIL
+  #define USAGE_UNSIMPLE_TAIL(a)
+#else
+  #define USAGE_UNSIMPLE_TAIL(a) a
+#endif
+#define tail_trivial_usage \
+        "[OPTION]... [FILE]..."
+#define tail_full_usage \
+        "Print last 10 lines of each FILE to standard output.\n" \
+        "With more than one FILE, precede each with a header giving the\n" \
+        "file name. With no FILE, or when FILE is -, read standard input.\n\n" \
+        "Options:\n" \
+        USAGE_UNSIMPLE_TAIL("\t-c N[kbm]\toutput the last N bytes\n") \
+        "\t-n N[kbm]\tprint last N lines instead of last 10\n" \
+        "\t-f\t\toutput data as the file grows" \
+        USAGE_UNSIMPLE_TAIL( "\n\t-q\t\tnever output headers giving file names\n" \
+        "\t-s SEC\t\twait SEC seconds between reads with -f\n" \
+        "\t-v\t\talways output headers giving file names\n\n" \
+        "If the first character of N (bytes or lines) is a '+', output begins with \n" \
+        "the Nth item from the start of each file, otherwise, print the last N items\n" \
+        "in the file. N bytes may be suffixed by k (x1024), b (x512), or m (1024^2)." )
+#define tail_example_usage \
+        "$ tail -n 1 /etc/resolv.conf\n" \
+        "nameserver 10.0.0.1\n"
+
+#ifdef CONFIG_FEATURE_TAR_CREATE
+  #define USAGE_TAR_CREATE(a) a
+#else
+  #define USAGE_TAR_CREATE(a)
+#endif
+#ifdef CONFIG_FEATURE_TAR_EXCLUDE
+  #define USAGE_TAR_EXCLUDE(a) a
+#else
+  #define USAGE_TAR_EXCLUDE(a)
+#endif
+#ifdef CONFIG_FEATURE_TAR_GZIP
+  #define USAGE_TAR_GZIP(a) a
+#else
+  #define USAGE_TAR_GZIP(a)
+#endif
+#ifdef CONFIG_FEATURE_TAR_BZIP2
+  #define USAGE_TAR_BZIP2(a) a
+#else
+  #define USAGE_TAR_BZIP2(a)
+#endif
+#ifdef CONFIG_FEATURE_TAR_COMPRESS
+  #define USAGE_TAR_COMPRESS(a) a
+#else
+  #define USAGE_TAR_COMPRESS(a)
+#endif
+
+#define tar_trivial_usage \
+        "-[" USAGE_TAR_CREATE("c") USAGE_TAR_GZIP("z") USAGE_TAR_BZIP2("j") USAGE_TAR_COMPRESS("Z") "xtvO] " \
+        USAGE_TAR_EXCLUDE("[-X FILE]") \
+        "[-f TARFILE] [-C DIR] [FILE(s)] ..."
+#define tar_full_usage \
+        "Create, extract, or list files from a tar file.\n\n" \
+        "Options:\n" \
+        USAGE_TAR_CREATE("\tc\t\tcreate\n") \
+        "\tx\t\textract\n" \
+        "\tt\t\tlist\n" \
+        "\nArchive format selection:\n" \
+        USAGE_TAR_GZIP("\tz\t\tFilter the archive through gzip\n") \
+        USAGE_TAR_BZIP2("\tj\t\tFilter the archive through bzip2\n") \
+        USAGE_TAR_COMPRESS("\tZ\t\tFilter the archive through compress\n") \
+        "\nFile selection:\n" \
+        "\tf\t\tname of TARFILE or \"-\" for stdin\n" \
+        "\tO\t\textract to stdout\n" \
+        USAGE_TAR_EXCLUDE( \
+        "\texclude\t\tfile to exclude\n" \
+         "\tX\t\tfile with names to exclude\n" \
+        ) \
+        "\tC\t\tchange to directory DIR before operation\n" \
+        "\tv\t\tverbosely list files processed"
+#define tar_example_usage \
+        "$ zcat /tmp/tarball.tar.gz | tar -xf -\n" \
+        "$ tar -cf /tmp/tarball.tar /usr/local\n"
+
+#define tee_trivial_usage \
+        "[OPTION]... [FILE]..."
+#define tee_full_usage \
+        "Copy standard input to each FILE, and also to standard output.\n\n" \
+        "Options:\n" \
+        "\t-a\tappend to the given FILEs, do not overwrite\n" \
+        "\t-i\tignore interrupt signals (SIGINT)"
+#define tee_example_usage \
+        "$ echo "Hello" | tee /tmp/foo\n" \
+        "$ cat /tmp/foo\n" \
+        "Hello\n"
+
+#ifdef CONFIG_FEATURE_TELNET_AUTOLOGIN
+#define telnet_trivial_usage \
+        "[-a] [-l USER] HOST [PORT]"
+#define telnet_full_usage \
+        "Telnet is used to establish interactive communication with another\n" \
+        "computer over a network using the TELNET protocol.\n\n" \
+        "Options:\n" \
+        "\t-a\t\tAttempt an automatic login with the USER variable.\n" \
+        "\t-l USER\t\tAttempt an automatic login with the USER argument.\n" \
+        "\tHOST\t\tThe official name, alias or the IP address of the\n" \
+        "\t\t\tremote host.\n" \
+        "\tPORT\t\tThe remote port number to connect to. If it is not\n" \
+        "\t\t\tspecified, the default telnet (23) port is used."
+#else
+#define telnet_trivial_usage \
+        "HOST [PORT]"
+#define telnet_full_usage \
+        "Telnet is used to establish interactive communication with another\n"\
+        "computer over a network using the TELNET protocol."
+#endif
+
+#ifdef CONFIG_FEATURE_TELNETD_INETD
+#define telnetd_trivial_usage \
+        "(inetd mode) [OPTION]"
+#define telnetd_full_usage \
+        "Telnetd uses incoming TELNET connections via inetd.\n"\
+        "Options:\n" \
+        "\t-l LOGIN\texec LOGIN on connect (default /bin/sh)\n" \
+        "\t-f issue_file\tDisplay issue_file instead of /etc/issue."
+#else
+#define telnetd_trivial_usage \
+        "[OPTION]"
+#define telnetd_full_usage \
+        "Telnetd listens for incoming TELNET connections on PORT.\n"\
+        "Options:\n" \
+        "\t-p PORT\tlisten for connections on PORT (default 23)\n"\
+        "\t-l LOGIN\texec LOGIN on connect (default /bin/sh)\n"\
+        "\t-f issue_file\tDisplay issue_file instead of /etc/issue."
+#endif
+
+#define test_trivial_usage \
+        "EXPRESSION\n  or   [ EXPRESSION ]"
+#define test_full_usage \
+        "Checks file types and compares values returning an exit\n" \
+        "code determined by the value of EXPRESSION."
+#define test_example_usage \
+        "$ test 1 -eq 2\n" \
+        "$ echo $?\n" \
+        "1\n" \
+        "$ test 1 -eq 1\n" \
+        "$ echo $?\n" \
+        "0\n" \
+        "$ [ -d /etc ]\n" \
+        "$ echo $?\n" \
+        "0\n" \
+        "$ [ -d /junk ]\n" \
+        "$ echo $?\n" \
+        "1\n"
+
+#ifdef CONFIG_FEATURE_TFTP_GET
+  #define USAGE_TFTP_GET(a) a
+#else
+  #define USAGE_TFTP_GET(a)
+#endif
+#ifdef CONFIG_FEATURE_TFTP_PUT
+  #define USAGE_TFTP_PUT(a) a
+#else
+  #define USAGE_TFTP_PUT(a)
+#endif
+#ifdef CONFIG_FEATURE_TFTP_BLOCKSIZE
+  #define USAGE_TFTP_BS(a) a
+#else
+  #define USAGE_TFTP_BS(a)
+#endif
+
+#define tftp_trivial_usage \
+        "[OPTION]... HOST [PORT]"
+#define tftp_full_usage \
+        "Transfers a file from/to a tftp server using \"octet\" mode.\n\n" \
+        "Options:\n" \
+        "\t-l FILE\tLocal FILE.\n" \
+        "\t-r FILE\tRemote FILE." \
+        USAGE_TFTP_GET( \
+        "\n\t-g\tGet file." \
+        ) \
+        USAGE_TFTP_PUT( \
+        "\n\t-p\tPut file." \
+        ) \
+        USAGE_TFTP_BS( \
+        "\n\t-b SIZE\tTransfer blocks of SIZE octets." \
+        )
+#define time_trivial_usage \
+        "[OPTION]... COMMAND [ARGS...]"
+#define time_full_usage \
+        "Runs the program COMMAND with arguments ARGS.  When COMMAND finishes,\n" \
+        "COMMAND's resource usage information is displayed\n\n" \
+        "Options:\n" \
+        "\t-v\tDisplays verbose resource usage information."
+
+#define top_trivial_usage \
+        "[-d <seconds>]"
+#define top_full_usage \
+        "top provides an view of processor activity in real time.\n" \
+        "This utility reads the status for all processes in /proc each <seconds>\n" \
+        "and shows the status for however many processes will fit on the screen.\n" \
+        "This utility will not show processes that are started after program startup,\n" \
+        "but it will show the EXIT status for and PIDs that exit while it is running."
+
+#define touch_trivial_usage \
+        "[-c] FILE [FILE ...]"
+#define touch_full_usage \
+        "Update the last-modified date on the given FILE[s].\n\n" \
+        "Options:\n" \
+        "\t-c\tDo not create any files"
+#define touch_example_usage \
+        "$ ls -l /tmp/foo\n" \
+        "/bin/ls: /tmp/foo: No such file or directory\n" \
+        "$ touch /tmp/foo\n" \
+        "$ ls -l /tmp/foo\n" \
+        "-rw-rw-r--    1 andersen andersen        0 Apr 15 01:11 /tmp/foo\n"
+
+#define tr_trivial_usage \
+        "[-cds] STRING1 [STRING2]"
+#define tr_full_usage \
+        "Translate, squeeze, and/or delete characters from\n" \
+        "standard input, writing to standard output.\n\n" \
+        "Options:\n" \
+        "\t-c\ttake complement of STRING1\n" \
+        "\t-d\tdelete input characters coded STRING1\n" \
+        "\t-s\tsqueeze multiple output characters of STRING2 into one character"
+#define tr_example_usage \
+        "$ echo "gdkkn vnqkc" | tr [a-y] [b-z]\n" \
+        "hello world\n"
+
+#define traceroute_trivial_usage \
+        "[-dnrv] [-m max_ttl] [-p port#] [-q nqueries]\n"\
+        "\t[-s src_addr] [-t tos] [-w wait] host [data size]"
+#define traceroute_full_usage \
+        "trace the route ip packets follow going to \"host\"\n" \
+        "Options:\n" \
+        "\t-d\tset SO_DEBUG options to socket\n" \
+        "\t-n\tPrint hop addresses numerically rather than symbolically\n" \
+        "\t-r\tBypass the normal routing tables and send directly to a host\n" \
+        "\t-v\tVerbose output\n" \
+        "\t-m max_ttl\tSet the max time-to-live (max number of hops)\n" \
+        "\t-p port#\tSet the base UDP port number used in probes\n" \
+        "\t\t(default is 33434)\n" \
+        "\t-q nqueries\tSet the number of probes per ``ttl'' to nqueries\n" \
+        "\t\t(default is 3)\n" \
+        "\t-s src_addr\tUse the following IP address as the source address\n" \
+        "\t-t tos\tSet the type-of-service in probe packets to the following value\n" \
+        "\t\t(default 0)\n" \
+        "\t-w wait\tSet the time (in seconds) to wait for a response to a probe\n" \
+        "\t\t(default 3 sec.)."
+
+
+#define true_trivial_usage \
+        ""
+#define true_full_usage \
+        "Return an exit code of TRUE (0)."
+#define true_example_usage \
+        "$ true\n" \
+        "$ echo $?\n" \
+        "0\n"
+
+#define tty_trivial_usage \
+        ""
+#define tty_full_usage \
+        "Print the file name of the terminal connected to standard input.\n\n"\
+        "Options:\n" \
+        "\t-s\tprint nothing, only return an exit status"
+#define tty_example_usage \
+        "$ tty\n" \
+        "/dev/tty2\n"
+
+#define udhcpc_trivial_usage \
+        "[-fbnqv] [-c CLIENTID] [-H HOSTNAME] [-i INTERFACE]\n[-p pidfile] [-r IP] [-s script]"
+#define udhcpc_full_usage \
+        "\t-c,\t--clientid=CLIENTID\tClient identifier\n" \
+        "\t-H,\t--hostname=HOSTNAME\tClient hostname\n" \
+        "\t-h,\t                   \tAlias for -H\n" \
+        "\t-f,\t--foreground\tDo not fork after getting lease\n" \
+        "\t-b,\t--background\tFork to background if lease cannot be immediately negotiated.\n" \
+        "\t-i,\t--interface=INTERFACE\tInterface to use (default: eth0)\n" \
+        "\t-n,\t--now\tExit with failure if lease cannot be immediately negotiated.\n" \
+        "\t-p,\t--pidfile=file\tStore process ID of daemon in file\n" \
+        "\t-q,\t--quit\tQuit after obtaining lease\n" \
+        "\t-r,\t--request=IP\tIP address to request (default: none)\n" \
+        "\t-s,\t--script=file\tRun file at dhcp events (default: /usr/share/udhcpc/default.script)\n" \
+        "\t-v,\t--version\tDisplay version"
+
+#define udhcpc_script_trivial_usage \
+        "[ACTION]"
+#define udhcpc_script_full_usage \
+        "Should only be called by udhcpc."
+
+#define udhcpd_trivial_usage \
+        "[configfile]\n" \
+
+#define udhcpd_full_usage \
+        ""
+
+#ifdef CONFIG_FEATURE_MOUNT_FORCE
+  #define USAGE_MOUNT_FORCE(a) a
+#else
+  #define USAGE_MOUNT_FORCE(a)
+#endif
+#define umount_trivial_usage \
+        "[flags] FILESYSTEM|DIRECTORY"
+#define umount_full_usage \
+        "Unmount file systems\n" \
+        "\nFlags:\n" "\t-a\tUnmount all file systems" \
+        USAGE_MTAB(" in /etc/mtab\n\t-n\tDon't erase /etc/mtab entries") \
+        "\n\t-r\tTry to remount devices as read-only if mount is busy" \
+        USAGE_MOUNT_FORCE("\n\t-f\tForce umount (i.e., unreachable NFS server)") \
+        USAGE_MOUNT_LOOP("\n\t-l\tDo not free loop device (if a loop device has been used)")
+#define umount_example_usage \
+        "$ umount /dev/hdc1 \n"
+
+#define uname_trivial_usage \
+        "[OPTION]..."
+#define uname_full_usage \
+        "Print certain system information.  With no OPTION, same as -s.\n\n" \
+        "Options:\n" \
+        "\t-a\tprint all information\n" \
+        "\t-m\tthe machine (hardware) type\n" \
+        "\t-n\tprint the machine's network node hostname\n" \
+        "\t-r\tprint the operating system release\n" \
+        "\t-s\tprint the operating system name\n" \
+        "\t-p\tprint the host processor type\n" \
+        "\t-v\tprint the operating system version"
+#define uname_example_usage \
+        "$ uname -a\n" \
+        "Linux debian 2.4.23 #2 Tue Dec 23 17:09:10 MST 2003 i686 GNU/Linux\n"
+
+#define uncompress_trivial_usage \
+        "[-c] [-f] [ name ... ]"
+#define uncompress_full_usage \
+        "Uncompress .Z file[s]\n" \
+        "Options:\n" \
+        "\t-c\textract to stdout\n" \
+        "\t-f\tforce overwrite an existing file"
+
+#define uniq_trivial_usage \
+        "[OPTION]... [INPUT [OUTPUT]]"
+#define uniq_full_usage \
+        "Discard all but one of successive identical lines from INPUT\n" \
+        "(or standard input), writing to OUTPUT (or standard output).\n\n" \
+        "Options:\n" \
+        "\t-c\tprefix lines by the number of occurrences\n" \
+        "\t-d\tonly print duplicate lines\n" \
+        "\t-u\tonly print unique lines\n" \
+        "\t-f N\tskip the first N fields\n" \
+        "\t-s N\tskip the first N chars (after any skipped fields)"
+#define uniq_example_usage \
+        "$ echo -e \"a\\na\\nb\\nc\\nc\\na\" | sort | uniq\n" \
+        "a\n" \
+        "b\n" \
+        "c\n"
+
+#define unix2dos_trivial_usage \
+        "[option] [FILE]"
+#define unix2dos_full_usage \
+        "Converts FILE from unix format to dos format.  When no option\n" \
+        "is given, the input is converted to the opposite output format.\n" \
+        "When no file is given, uses stdin for input and stdout for output.\n" \
+        "Options:\n" \
+        "\t-u\toutput will be in UNIX format\n" \
+        "\t-d\toutput will be in DOS format"
+
+#define unzip_trivial_usage \
+        "[-opts[modifiers]] file[.zip] [list] [-x xlist] [-d exdir]"
+#define unzip_full_usage \
+        "Extracts files from ZIP archives.\n\n" \
+        "Options:\n" \
+        "\t-l\tlist archive contents (short form)\n" \
+        "\t-n\tnever overwrite existing files (default)\n" \
+        "\t-o\toverwrite files without prompting\n" \
+        "\t-p\tsend output to stdout\n" \
+        "\t-q\tbe quiet\n" \
+        "\t-x\texclude these files\n" \
+        "\t-d\textract files into this directory"
+
+#define uptime_trivial_usage \
+        ""
+#define uptime_full_usage \
+        "Display the time since the last boot."
+#define uptime_example_usage \
+        "$ uptime\n" \
+        "  1:55pm  up  2:30, load average: 0.09, 0.04, 0.00\n"
+
+#define usleep_trivial_usage \
+        "N"
+#define usleep_full_usage \
+        "Pause for N microseconds."
+#define usleep_example_usage \
+        "$ usleep 1000000\n" \
+        "[pauses for 1 second]\n"
+
+#define uudecode_trivial_usage \
+        "[FILE]..."
+#define uudecode_full_usage \
+        "Uudecode a file that is uuencoded.\n\n" \
+        "Options:\n" \
+        "\t-o FILE\tdirect output to FILE"
+#define uudecode_example_usage \
+        "$ uudecode -o busybox busybox.uu\n" \
+        "$ ls -l busybox\n" \
+        "-rwxr-xr-x   1 ams      ams        245264 Jun  7 21:35 busybox\n"
+
+#define uuencode_trivial_usage \
+        "[OPTION] [INFILE] REMOTEFILE"
+#define uuencode_full_usage \
+        "Uuencode a file.\n\n" \
+        "Options:\n" \
+        "\t-m\tuse base64 encoding per RFC1521"
+#define uuencode_example_usage \
+        "$ uuencode busybox busybox\n" \
+        "begin 755 busybox\n" \
+        "<encoded file snipped>\n" \
+        "$ uudecode busybox busybox > busybox.uu\n" \
+        "$\n"
+
+#define vconfig_trivial_usage \
+        "COMMAND [OPTIONS] ..."
+#define vconfig_full_usage \
+        "vconfig lets you create and remove virtual ethernet devices.\n\n" \
+        "Options:\n" \
+        "\tadd             [interface-name] [vlan_id]\n" \
+        "\trem             [vlan-name]\n" \
+        "\tset_flag        [interface-name] [flag-num]       [0 | 1]\n" \
+        "\tset_egress_map  [vlan-name]      [skb_priority]   [vlan_qos]\n" \
+        "\tset_ingress_map [vlan-name]      [skb_priority]   [vlan_qos]\n" \
+        "\tset_name_type   [name-type]"
+
+#define vi_trivial_usage \
+        "[OPTION] [FILE]..."
+#define vi_full_usage \
+        "edit FILE.\n\n" \
+        "Options:\n" \
+        "\t-R\tRead-only- do not write to the file."
+
+#define vlock_trivial_usage \
+        "[OPTIONS]"
+#define vlock_full_usage \
+        "Lock a virtual terminal.  A password is required to unlock\n" \
+        "Options:\n" \
+        "\t-a\tLock all VTs"
+
+#define watch_trivial_usage \
+        "[-n <seconds>] COMMAND..."
+#define watch_full_usage \
+        "Executes a program periodically.\n" \
+        "Options:\n" \
+        "\t-n\tLoop period in seconds - default is 2."
+#define watch_example_usage \
+        "$ watch date\n" \
+        "Mon Dec 17 10:31:40 GMT 2000\n" \
+        "Mon Dec 17 10:31:42 GMT 2000\n" \
+        "Mon Dec 17 10:31:44 GMT 2000"
+
+#define watchdog_trivial_usage \
+        "[-t <seconds>] DEV"
+#define watchdog_full_usage \
+        "Periodically write to watchdog device DEV.\n" \
+        "Options:\n" \
+        "\t-t\tTimer period in seconds - default is 30."
+
+#define wc_trivial_usage \
+        "[OPTION]... [FILE]..."
+#define wc_full_usage \
+        "Print line, word, and byte counts for each FILE, and a total line if\n" \
+        "more than one FILE is specified.  With no FILE, read standard input.\n\n" \
+        "Options:\n" \
+        "\t-c\tprint the byte counts\n" \
+        "\t-l\tprint the newline counts\n" \
+        "\t-L\tprint the length of the longest line\n" \
+        "\t-w\tprint the word counts"
+#define wc_example_usage \
+        "$ wc /etc/passwd\n" \
+        "     31      46    1365 /etc/passwd\n"
+
+#define wget_trivial_usage \
+        "[-c|--continue] [-q|--quiet] [-O|--output-document file]\n" \
+        "\t\t[--header 'header: value'] [-Y|--proxy on/off] [-P DIR] url"
+#define wget_full_usage \
+        "wget retrieves files via HTTP or FTP\n\n" \
+        "Options:\n" \
+        "\t-c\tcontinue retrieval of aborted transfers\n" \
+        "\t-q\tquiet mode - do not print\n" \
+        "\t-P\tSet directory prefix to DIR\n" \
+        "\t-O\tsave to filename ('-' for stdout)\n" \
+        "\t-Y\tuse proxy ('on' or 'off')"
+
+#define which_trivial_usage \
+        "[COMMAND ...]"
+#define which_full_usage \
+        "Locates a COMMAND."
+#define which_example_usage \
+        "$ which login\n" \
+        "/bin/login\n"
+
+#define who_trivial_usage \
+        " "
+#define who_full_usage \
+        "Prints the current user names and related information"
+
+#define whoami_trivial_usage \
+        ""
+#define whoami_full_usage \
+        "Prints the user name associated with the current effective user id."
+
+#ifdef CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION
+#define USAGE_XARGS_CONFIRMATION(a) a
+#else
+#define USAGE_XARGS_CONFIRMATION(a)
+#endif
+#ifdef CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT
+#define USAGE_XARGS_TERMOPT(a) a
+#else
+#define USAGE_XARGS_TERMOPT(a)
+#endif
+#ifdef CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM
+#define USAGE_XARGS_ZERO_TERM(a) a
+#else
+#define USAGE_XARGS_ZERO_TERM(a)
+#endif
+
+
+#define xargs_trivial_usage \
+        "[COMMAND] [OPTIONS] [ARGS...]"
+#define xargs_full_usage \
+        "Executes COMMAND on every item given by standard input.\n\n" \
+        "Options:\n" \
+        USAGE_XARGS_CONFIRMATION("\t-p\tPrompt the user about whether to run each command\n") \
+        "\t-r\tDo not run command for empty readed lines\n" \
+        USAGE_XARGS_TERMOPT("\t-x\tExit if the size is exceeded\n") \
+        USAGE_XARGS_ZERO_TERM("\t-0\tInput filenames are terminated by a null character\n") \
+        "\t-t\tPrint the command line on stderr before executing it."
+#define xargs_example_usage \
+        "$ ls | xargs gzip\n" \
+        "$ find . -name '*.c' -print | xargs rm\n"
+
+#define yes_trivial_usage \
+        "[OPTION]... [STRING]..."
+#define yes_full_usage \
+        "Repeatedly outputs a line with all specified STRING(s), or 'y'."
+
+#define zcat_trivial_usage \
+        "FILE"
+#define zcat_full_usage \
+        "Uncompress to stdout."
+
+#endif /* __BB_USAGE_H__ */
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/urunlevel/my_linux/Config.in b/urunlevel/my_linux/Config.in
new file mode 100644
index 0000000..89f3c24
--- /dev/null
+++ b/urunlevel/my_linux/Config.in
@@ -0,0 +1,32 @@
+#
+# For a description of the syntax of this configuration file,
+# see scripts/kbuild/config-language.txt.
+#
+
+menu "My Linux Utilities"
+
+config CONFIG_GETPKG
+        bool "getpkg"
+        default y
+        help
+          An implementation of the My Linux getpkg script.
+
+config CONFIG_LINUXRC
+        bool "linuxrc"
+        default y
+        help
+          An implementation of the linuxrc boot script.
+
+config CONFIG_MAN
+        bool "man"
+        default y
+        help
+          An implementation of the My Linux man script.
+
+config CONFIG_RCS
+        bool "rcS"
+        default y
+        help
+          An implementation of rcS.
+
+endmenu
diff --git a/urunlevel/my_linux/Makefile b/urunlevel/my_linux/Makefile
new file mode 100644
index 0000000..5160a99
--- /dev/null
+++ b/urunlevel/my_linux/Makefile
@@ -0,0 +1,32 @@
+# Makefile for busybox
+#
+# Copyright (C) 1999-2004 by Erik Andersen <andersen@codepoet.org>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+
+top_srcdir=..
+top_builddir=..
+srcdir=$(top_srcdir)/my_linux
+MY_LINUX_DIR:=./
+include $(top_builddir)/Rules.mak
+include $(top_builddir)/.config
+include $(srcdir)/Makefile.in
+all: $(libraries-y)
+-include $(top_builddir)/.depend
+
+clean:
+        rm -f *.o *.a $(AR_TARGET)
+
diff --git a/urunlevel/my_linux/Makefile.in b/urunlevel/my_linux/Makefile.in
new file mode 100644
index 0000000..db30a61
--- /dev/null
+++ b/urunlevel/my_linux/Makefile.in
@@ -0,0 +1,40 @@
+# Makefile for busybox
+#
+# Copyright (C) 1999-2004 by Erik Andersen <andersen@codepoet.org>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+
+MY_LINUX_AR:=my_linux.a
+ifndef $(MY_LINUX_DIR)
+MY_LINUX_DIR:=$(top_builddir)/my_linux/
+endif
+srcdir=$(top_srcdir)/my_linux
+
+MY_LINUX-y:=
+MY_LINUX-$(CONFIG_GETPKG)       += getpkg.o
+MY_LINUX-$(CONFIG_LINUXRC)      += linuxrc.o
+MY_LINUX-$(CONFIG_MAN)  += man.o
+MY_LINUX-$(CONFIG_MAN)  += mkrootfs.o
+MY_LINUX-$(CONFIG_RCS)  += rcS.o
+
+libraries-y+=$(MY_LINUX_DIR)$(MY_LINUX_AR)
+
+$(MY_LINUX_DIR)$(MY_LINUX_AR): $(patsubst %,$(MY_LINUX_DIR)%, $(MY_LINUX-y))
+        $(AR) -ro $@ $(patsubst %,$(MY_LINUX_DIR)%, $(MY_LINUX-y))
+
+$(MY_LINUX_DIR)%.o: $(srcdir)/%.c
+        $(CC) $(CFLAGS) $(EXTRA_CFLAGS) -c -o $@ $<
+
diff --git a/urunlevel/my_linux/Trinux/README b/urunlevel/my_linux/Trinux/README
new file mode 100644
index 0000000..b07fa7f
--- /dev/null
+++ b/urunlevel/my_linux/Trinux/README
@@ -0,0 +1,346 @@
+Trinux Documentation                            Matthew Franz <mfranz@cisco.com>
+http://trinux.sf.net/docs.txt               21 August 2003
+
+0. Introduction
+
+        0.1 What is Trinux?
+
+                Trinux is a ramdisk-based Linux distribution that was first
+                released in April of 1998 and has been maintained on and off
+                since then. Like other Linux distributions it consists of a 
+                Linux kernel, base utilities, and a variety of packages. Like
+                many embedded distributions, Trinux uses Busybox, which contains
+                small versions of common utilities. See http://www.busybox.net.
+
+        0.2 Where can I get the source?
+
+                Many of the standard utilities came from Slackware 7.1 or
+                when components needed to be upgraded, I pulled the source
+                from the Debian stable. The "original code" would be in the
+                /linuxrc script that is executed within
+
+        0.3 Installation
+
+                Trinux is released in either 1.4 meg floppy images or small ISO
+                images. For the floppy images use dd on unix boxes or rawrite
+                on Windows. Search the web for info.
+
+        0.4 If in doubt look at the /linuxrc script!
+
+1. Boot Media
+
+        1.1 Common Format
+
+                * bzImage - compressed linux kernel
+                * tux - trinux configuration directory (like /etc on Unix) that
+                  gets copied to /etc/tux when trinux boots
+                * bootpkg - packages that need to be loaded early
+                * kpkg - modular kernel packages
+                * initrd.gz - compressed initial ramdisk
+                * modules - raw (*.o) modules will be automatically loaded
+
+        1.2 Floppy Disks
+
+                Trinux uses MS-DOS (vfat actually) formatted disks and syslinux
+                as the bootloader. The files/directories described in 1.1 are 
+                directly off the root of the drive.
+
+                * syslinux.cfg - bootloader configuration file
+                * ldlinux.sys - SYSLINUX bootloader (http://syslinux.zytor.com/)
+
+        1.3 CD-ROM
+
+                Bootable CD's are ISO9660 filesytem contain 2 directories:
+                * isolinux - bzImage, initrd.gz, isolinux.bin, isolinux.cfg
+                * trinux - bootpkg, kpkg, modules, tux
+
+        1.4 Fixed Partition (IDE Drive)
+
+                Trinux can also be booted from a Windows 95/98, MS-DOS, or
+                FreeDOS partition using loadlin.exe. This is an option for older
+                hardware that might not have a CD-ROM (or a bootable one) or
+                if you want to load packages from a compact Flash drive using an
+                IDE Compact-Flash Adapter.
+
+                1.4.1 Prepping the Drive
+
+                        Use a Windows 95/98 or MS-DOS boot disk or the Trinux FreeDOS
+                        Utility Disk (available on the downloads page) to create a FAT
+                        partition. This involves running FDISK, FORMAT, and SYS. You
+                        should copy loadlin.exe to the drive and it is also useful to have
+                        a text editor (FreeDOS has TE) to edit batch files. You will 
+                        need to create trinux directory. My C:\ drive (mounted from
+                        within Trinux as a vfat) looks like this:
+
+                        trinux> ls -al
+                        root     root        16384 Jul 24 23:28 .
+                        root     root          832 Sep  3  2002 ..
+                        root     root         2048 Jul 20 18:51 .links
+                        root     root           50 Jul 20 17:35 autoexec.bat
+                        root     root       618999 Jul 20 18:11 bzimage
+                        root     root        86561 Aug 15  2001 command.com
+                        root     root        45836 Jul 20 17:35 fdisk.exe
+                        root     root        13741 Jul 20 17:35 format.exe
+                        root     root       600357 Jul 21 01:01 initrd.gz
+                        root     root        75663 Sep  3  2001 kernel.sys
+                        root     root        32177 Jul 20 17:35 loadlin.exe
+                        root     root        32719 Jul 20 17:35 loadlin.txt
+                        root     root         2048 Jul 20 18:33 old
+                        root     root         8634 Jul 20 17:36 sys.com
+                        root     root        44706 Jul 20 17:35 te.exe
+                        root     root         2048 Jul 21 12:31 trinux
+
+                        TRINUX.BAT on the FreeDOS boot floppy contains the following
+                        which I renamed to AUTOEXEC.BAT once I new it was stable.
+
+                                loadlin bzimage initrd=initrd.gz root=/dev/ram0 rw
+
+                        I have had mixed results with FreeDOS, so it might be best
+                        to find a Windows 95/98/SE boot disk with fdisk and format.
+                        I found a DOS 6.22 boot disk with the right tools from
+                        http://www.bootdisk.com.
+
+                        Copy a kernel that has IDE support (all the kernels on the
+                        boot floppies after Trinux 0.890 should have the or a kernel
+                        from the CD-ROM will work to) and an initrd.gz to the c:\
+                        drive. You can do this from DOS or from Linux.
+
+                1.4.2 Copying necessary files to the DOS partition
+
+                        Boot with a Trinux floppy (or CD-ROM) that has IDE support
+                        and then mount the MS-DOS partition with the following 
+                        command
+                        
+                                # mount -t vfat /dev/hda1 /mnt
+
+                        This assumes the first IDE drive and should work for most
+                        cases. Now create (or cd) the trinux directory on that 
+                        partition and create the subdirectories for packages
+
+                                # cd /mnt/trinux
+                                # mkdir bootpkg kpkg pkg modules
+                                # mkdir -p tux/config
+                                # mkdir tux/
+
+                        Now you need to get a minimum set of packages into the bootpkg
+                        directory. If you have network access you can download them with
+                        links (getpkg links) or you can copy them to floppies. I have
+                        the following in mine:
+
+                        root     root       245776 Jul 20 19:17 baselib.tgz
+                        root     root        15932 Jul 20 18:17 dhcpcd.tgz
+                        root     root        90312 Jul 20 18:17 dnslibs.tgz
+                        root     root       163951 Jul 21 12:28 iptables.tgz
+                        root     root       131200 Jul 21 12:28 netfilter.tgz
+                        root     root        77834 Jul 20 19:22 pthread.tgz
+                        root     root       378444 Jul 20 19:22 term.tgz
+
+                        These will always get loaded. You can also put packages in the
+                        pkg directory and these may/may not load depending on your
+                        configuration.
+
+                        Remember, after you are through modifying the partition, it
+                        needs to be unmounted with:
+
+                        #umount /dev/hda1  
+                                or
+                        #umount /mnt
+                        
+                1.4.3 Configuarition
+
+
+2. Networking
+
+        2.1 Hardware Detection
+
+                In order for you to use networking your interface(s) must be
+                detected by the kernel. In order for this to occur you must either
+                have support for your NIC compiled into the kernel or use a kernel
+                module. Older versions of Trinux had support for the most common
+                NiCs built in, but that is no longer the case.
+
+                If your hardware was succuessfully found
+
+                # dmesg | grep eth0
+                eth0: OEM i82557/i82558 10/100 Ethernet, 00:03:47:B9:12:08, IRQ 11
+
+        2.2 Module Selection
+
+3. Kernel Modules
+
+        Raw (non-packaged kernel modules are available at:
+        http://trinux.sf.net/kernel/
+        
+        Packaged kernel modules are available at http://trinux.sf.net/pkg/2.4.x/ 
+        and may be installed with the "getkpkg <name>"
+
+        Trinux puts all packages in /lib/modules or /usr/lib/modules instead
+        of the standard linux convention of /lib/modules/2.4.x/...
+
+4. Packages
+        
+        4.1 Package Format
+
+                Packages are simply tarballs with an initialization script that
+                will be executed from within /etc/init.d/package_name or 
+                /etc/init.m/kernel_package_name
+
+        4.2 Scripts
+        
+                * pkgadd  - loads a package from a local filesystem
+                * getpkg  - loads the package from the network
+                * getkpkg - loads a kernel package from the network
+        * pkglist - lists available packages
+                * rmpkg   - deletes package
+                * mypkg   - shows packages currently installed
+
+        4.3 Building your own
+
+                All the Trinux packages are compiled with glibc 2.1.3 using
+                Slackware 7.1. I upgraded the compiler to gcc 2.95 and have upgraded
+                libraries as necessary.
+
+        4.4 Adding packages after bootup
+
+                You can either use the getpkg/getkpkg commands to load a package
+                from the network. If /etc/tux/config/localpkg is set 
+                (added 0.891)
+
+        4.5 Configuration
+
+                Add list of package (in order) to /etc/tux/config/pkglist and these
+                will be loaded at boot
+
+        4.6 Miscellaneous
+
+5. Filesystems
+
+        5.1 Supported Filesytems
+
+                Trinux may only have support for a few filesystems such as minix
+                vfat (Windows) and ISO9660 (for CDROMs). To see which filesystems
+                are currently supported in the kernel:
+
+                # cat /proc/filesystems | grep -v nodev
+                        minix
+                                vfat
+                                iso9660
+                        reiserfs
+
+                In this case I installed the reiserfs module:
+
+                # lsmod
+                reiserfs              165600   1
+                3c59x                  24560   1
+                8139too                13396   1
+                mii                     2092   0 [8139too]
+
+
+                To mount a device you use the following command:
+                
+                        mount <device> -t <filesystem type> <mount point)
+                
+                So to mount the floppy you would 
+
+                You can determine the which IDE devices are present by the following
+                command:
+
+                # dmesg | grep hd
+                ide0: BM-DMA at 0x1850-0x1857, BIOS settings: hda:DMA, hdb:pio
+                ide1: BM-DMA at 0x1858-0x185f, BIOS settings: hdc:pio, hdd:pio
+                hda: IC25N040ATCS04-0, ATA DISK drive
+                hda: 78140160 sectors (40008 MB) w/1768KiB Cache, CHS=5168/240/63
+                hda: hda1 hda2 hda3 < hda5 hda6 > hda4
+                hde: LEXAR ATA FLASH, ATA DISK drive
+                hde: 96384 sectors (49 MB) w/1KiB Cache, CHS=753/4/32
+                hde: hde1
+
+                So assuming hde1 were a vfat partition, you would use:
+
+                # mount -t vfat /dev/hde1 /mnt
+                # mount
+                /dev/hda2 on / type ext3 (rw,errors=remount-ro)
+                proc on /proc type proc (rw)
+                devpts on /dev/pts type devpts (rw,gid=5,mode=620)
+                /dev/hda4 on /alt type reiserfs (rw)
+                /trinux/boot/trinux.img on /loop type vfat (rw,loop=/dev/loop0)
+                /dev/hde1 on /mnt type vfat (rw)
+
+                This was from my laptop. Within Trinux, the following is more
+                typical:
+
+                # mount
+                /dev/ram0 on / type minix (rw)
+                /proc on /proc type proc (rw)
+                /dev/null on /usr type tmpfs (rw)
+                /dev/null on /home type tmpfs (rw)
+                /dev/null on /var type tmpfs (rw)
+                /dev/hda2 on /hda2 type reiserfs (rw)
+
+                
+        5.3 Swap
+
+                Usually, you probably have enough memory (otherwise you wouldn't
+                be running ramdisks) but if you want to set up a swap file or swap
+                filesystem, put the name of the file (within an existing filesytem)
+                the name of the partition (/dev/hda3) in /etc/tux/config/swap and 
+                the linuxrc will automatically run mkswap and swapon. You may 
+                want to make sure the swaputils.tgz package is included, 
+                although it will be loaded automatically if /sbin/makeswap 
+                isn't found.
+
+        5.4 Tmpfs
+
+                A neat feature that came out in 2.4 was the ability to use the
+                temporary or shared memory filesystem instead of ramdisks. The key
+                advantage is that ramdisks are completed allocated when the are
+                created, but tmpfs partitions only use RAM as they are filled.
+
+
+                Trinux only has support for a minimal set of filesystems
+
+6. Management and Monitoring
+
+                Although it is probably not the most common option, Trinux can be
+                used in a headless server capacity
+
+        6.1 Serial Console
+
+        6.2 SSH Remote Logins
+
+        6.3 Enabling Cisco Discovery Protocol (CDP)
+
+        6.4 Building a Local Package Server
+
+7. Miscellaneous
+
+        6.1 Troubleshooting
+
+                Recent versions of trinux have a /sbin/hwinfo script that gathers
+                hardware information about the system and saves it to the file
+                /tmp/hwinfo. It basically saves the output of the dmesg command
+                and copies the values of some /proc files that can be used to help
+                troubleshoot hardware problems. The following commands allow you to
+                save this file to the boot floppy (assuming you have enough room)
+                
+                        # fmount
+                        # cp /tmp/hwinfo /floppy
+                        # fumount
+
+                You can then post some or all of this file to the trinux-talk mailing
+                list when you have a problem.
+
+        6.2 Where to get help
+
+                You should subscribe to the trinux-talk mailing list
+
+        6.3 Floppy Errors
+
+                If you do not have a floppy drive or you floppy drive takes very 
+                long to time out, append "nofloppy" to the kernel boot arguments.
+                CD-ROM booting automatically disables this checking. I had to do
+                this on an old Compaq 486-66 because it was taking several minutes
+                to complete the bootup:
+
+                        loadlin bzimage initrd=initrd.gz root=/dev/ram0 rw nofloppy
+
diff --git a/urunlevel/my_linux/Trinux/chkfixed b/urunlevel/my_linux/Trinux/chkfixed
new file mode 100755
index 0000000..4cbb45b
--- /dev/null
+++ b/urunlevel/my_linux/Trinux/chkfixed
@@ -0,0 +1,99 @@
+#!/bin/sh
+#
+# chkfixed - look for legitimate parititions and build mount points
+# and populate /etc/proc
+#
+
+rm /tmp/partitions 2> /dev/null
+
+
+[ -d /etc/proc ] || mkdir /etc/proc
+
+if [ -f /etc/tux/config/fstab ] 
+then
+        echo "fstab found, exiting..."
+        exit 1
+fi
+
+for i in `grep -v nodev /proc/filesystems`
+do
+        echo "$i"
+done > /etc/proc/availfs
+
+echo "The following filesystems are supported:"
+cat /etc/proc/availfs
+echo
+
+cdpart=`dmesg | grep D-ROM | grep hd | cut -d: -f1`
+
+if [ "$cdpart" ] 
+then
+        echo "A CD-ROM was found at $cdpart"
+        echo "$cdpart" > /tmp/partitions
+fi
+
+partitions=`dmesg | grep ' hd[abcdef]' | cut -d':' -f2`
+scsiparts=`dmesg | grep "^ sd[abcdef][12345]"`
+
+echo IDE Partitions: $partitions
+echo SCSI Partitions: $scsiparts
+
+for i in $partitions
+do
+
+        if  echo "$partitions"  | grep unknown > /dev/null
+        then
+                echo "Unkown partition"
+        else
+                echo $i >> /tmp/partitions 
+        fi
+done
+
+for i in $partitions
+do
+
+        if  echo "$partitions"  | grep unknown > /dev/null
+        then
+                echo "Unkown partition"
+        else
+                echo $i >> /tmp/partitions 
+        fi
+done
+
+
+for i in $scsiparts
+do
+        echo $i >> /tmp/partitions 
+done
+
+if [ ! -f /tmp/partitions ]
+then
+        echo "No fixed partitions found!"
+        exit
+fi
+
+sort /tmp/partitions | uniq | grep "hd" > /etc/proc/partitions
+sort /tmp/partitions | uniq | grep "sd" >> /etc/proc/partitions
+
+echo "The following partitions were found: "
+cat /etc/proc/partitions
+echo
+
+##echo "The following filesystems were found: "
+for i in `cat /etc/proc/partitions`
+do
+        mkdir /$i 2> /dev/null
+
+        for j in `cat /etc/proc/availfs`
+        do
+                echo -n Checking $i:
+                if mount -o ro -t $j /dev/$i /$i  2> /dev/null > /dev/null
+                then
+                        echo " found $j"
+                        echo "$i:$j" >> /etc/tux/config/fstab
+                        umount /dev/$i 2> /dev/null > /dev/null
+                else
+                        echo
+                fi
+        done
+done
diff --git a/urunlevel/my_linux/Trinux/fmount b/urunlevel/my_linux/Trinux/fmount
new file mode 100755
index 0000000..db8595b
--- /dev/null
+++ b/urunlevel/my_linux/Trinux/fmount
@@ -0,0 +1,2 @@
+#!/bin/sh
+mount -t vfat /dev/fd0 /floppy
diff --git a/urunlevel/my_linux/Trinux/fumount b/urunlevel/my_linux/Trinux/fumount
new file mode 100755
index 0000000..003ce14
--- /dev/null
+++ b/urunlevel/my_linux/Trinux/fumount
@@ -0,0 +1,3 @@
+#!/bin/sh
+cd /
+umount /dev/fd0 
diff --git a/urunlevel/my_linux/Trinux/gethome b/urunlevel/my_linux/Trinux/gethome
new file mode 100755
index 0000000..c47c238
--- /dev/null
+++ b/urunlevel/my_linux/Trinux/gethome
@@ -0,0 +1,61 @@
+#!/bin/sh
+
+if [ "$1" ]
+then
+        home=$1
+else
+        home="home"
+fi
+
+homeline=`cat /etc/tux/config/home`
+
+if [ "$homeline" ]
+then
+        PROTO=`cut -d':' -f1 /etc/tux/config/home`
+        HOST=`cut -d':' -f2 /etc/tux/config/home`
+        USER=`cut -d':' -f3 /etc/tux/config/home`
+else
+        echo -n "ftp or ssh: "
+        read PROTO
+        echo -n "Host: "
+        read HOST
+        echo -n "User: "
+        read USER
+        echo $PROTO:$HOST:$USER > /etc/tux/config/home
+fi
+
+
+echo "Retrieving home directory from $USER@$HOST via $PROTO"
+
+if [ $PROTO = "ssh" ]
+then
+        scp $USER@$HOST:~/$home.tgz / 
+fi
+
+if [ $PROTO = "ftp" ]
+then
+        echo "Using FTP to transfor $home.tgz -- your passwords are sniffable"
+
+        if [ -x /usr/bin/curl ]
+        then
+                curl -u $USER ftp://$HOST/$home.tgz > /$home.tgz
+
+        else
+                echo "Curl is not installed.  You will have to login with your" 
+                echo "username and upload $home.tgz manually"
+
+                ftp $HOST
+
+        fi
+fi
+
+cd /
+echo
+echo "Uncompressing archive..."
+gunzip -c $home.tgz | tar xvf -
+rm /$home.tgz 2> /dev/null
+
+ 
+
+
+
diff --git a/urunlevel/my_linux/Trinux/getkpkg b/urunlevel/my_linux/Trinux/getkpkg
new file mode 100755
index 0000000..ceab0ce
--- /dev/null
+++ b/urunlevel/my_linux/Trinux/getkpkg
@@ -0,0 +1,9 @@
+#!/bin/sh
+
+if [ "$1" ]
+then
+        KERNEL=`uname -r`
+        getpkg $KERNEL/$1
+else
+        echo "No package specified!"
+fi
diff --git a/urunlevel/my_linux/Trinux/getpkg b/urunlevel/my_linux/Trinux/getpkg
new file mode 100755
index 0000000..adeab02
--- /dev/null
+++ b/urunlevel/my_linux/Trinux/getpkg
@@ -0,0 +1,171 @@
+#!/bin/sh
+#
+# getpkg - retrieves a single package from package server
+#
+# Author: Matthew D. Franz <mdfranz@io.com>
+#
+# $1 - name of package
+# $2 - URL of server
+#
+############################################################################
+
+[ -d /var/pkg/contents ] || mkdir -p /var/pkg/contents
+
+# if in current directory, call pkgadd
+
+if [ -f "$1" ]
+then
+        pkgadd $i
+else
+        if [ -f /etc/tux/config/localpkg ]
+        then
+                print "Using local package repository"
+                if [ -f /etc/proc/fixed ]
+                then
+                        print "Found /etc/proc/fixed"
+                fi
+        fi
+fi
+
+
+if [ -f /etc/tux/config/proxy ]
+then
+        SNARF_PROXY=`cat /etc/tux/config/proxy`
+        export SNARF_PROXY
+fi
+
+mkdir /etc/init.d/running 2> /dev/null
+
+if [ "$1" = "list" ]
+then
+        pkglist
+        exit
+fi
+
+if [ "$1" = "all" ]
+        then
+                echo "Downloading all packages..."
+
+                if [ ! -f /etc/tux/config/eth0 ]
+                then
+                        echo "Network was not configured"
+                        if dmesg | grep eth0 > /dev/null
+                        then    
+                                echo -n "Attempting DHCP on eth0: "
+                                if dhcpcd > /dev/null 2> /dev/null
+                                then
+                                        echo "Successful"
+                                else
+                                        echo "Failed"
+                                        exit
+                                fi
+                        else
+                                echo "No ethernet interfaces were found"
+                                exit
+                        fi
+                fi
+
+                if [ -f /etc/tux/config/pkglist ]
+                then
+                        pkglist=`cat /etc/tux/config/pkglist`
+                        for i in $pkglist
+                        do
+                                getpkg $i
+                        done
+                else
+                        echo "No package list found, retrieving a minimal set"
+                        getpkg baselib
+                        getpkg term
+                        getpkg vi
+                        getpkg tcpdump
+                fi
+
+                exit 
+fi
+
+if [ "$1" = "" ]
+then
+        echo; echo "You did not specify a package or server!"; echo     
+        echo "getpkg all will load all the packages from /etc/tux/config/pkglist"
+        getpkg all 
+else
+        if [ "$2" = "" ]
+                then
+                if [ "$URL" = "" ]
+                then
+                        if [ -f /etc/tux/config/server ]
+                        then
+                                blah=1
+                        else
+                                echo -n "Enter URL for package retrieval: "
+                                read URL
+                                if [ "$URL" != "" ] 
+                                then
+                                        echo "Using $URL as your package server from now on..."
+                                        echo "$URL" > /etc/tux/config/server
+                                fi
+                        fi
+                fi
+        else
+                        URL=$2  
+        fi
+
+        if echo $1 | grep tgz > /dev/null
+        then
+                FILE=$1
+        else
+                FILE=$1.tgz
+        fi
+
+        cd /
+
+        PREFIX=`basename $FILE ".tgz"`
+
+        #echo $PREFIX   
+
+        MODPKGNAME=`echo ${1} | cut -d'/' -f2`
+
+
+        if echo $MODPKGNAME | grep tgz > /dev/null
+        then
+                MODPKGNAME=`basename $MODPKGNAME ".tgz"`
+        fi
+
+        # Loop through servers listed in  
+
+        for URL in `cat /etc/tux/config/server`
+        do
+                if snarf $URL - > /dev/null 2> /dev/null
+                then
+                        echo "Retrieving ${URL}${FILE}"
+                        output=`snarf ${URL}/${FILE} - | gunzip -c | tar xvf -`
+                fi 
+
+                echo $output > /var/pkg/contents/$PREFIX
+
+                if [ -f /etc/init.d/${PREFIX} ]
+                then            
+                        chmod a+x /etc/init.d/${PREFIX} 2> /dev/null
+                        echo; echo "Initializing ${PREFIX}"
+                        /etc/init.d/${PREFIX} 2>  /dev/null
+                fi
+
+
+                if [ "$MODPKGNAME" ]
+                then            
+                        chmod a+x /etc/init.m/${MODPKGNAME} 2> /dev/null
+                        if [ -x /etc/init.m/$MODPKGNAME ]
+                        then
+                                /etc/init.m/$MODPKGNAME
+                                echo "Initializing $1 modules"
+                        fi
+                fi
+
+
+                break
+        done
+
+        [ $? -eq 0 ] || exit 1
+
+fi
+
diff --git a/urunlevel/my_linux/Trinux/hwinfo b/urunlevel/my_linux/Trinux/hwinfo
new file mode 100755
index 0000000..5e32126
--- /dev/null
+++ b/urunlevel/my_linux/Trinux/hwinfo
@@ -0,0 +1,23 @@
+#!/bin/sh
+
+echo "Gathering hardware information, saving to /tmp/hwinfo"
+
+echo "[--- dmesg ---]" > /tmp/hwinfo
+dmesg >> /tmp/hwinfo
+echo "[--- /proc/devices ---]" >> /tmp/hwinfo
+cat /proc/devices >> /tmp/hwinfo
+echo "[--- /proc/iomem ---]" >> /tmp/hwinfo
+cat /proc/iomem >> /tmp/hwinfo
+echo "[--- /proc/ioports ---]" >> /tmp/hwinfo
+cat /proc/ioports >> /tmp/hwinfo
+echo "[--- /proc/interrupts ---]" >> /tmp/hwinfo
+cat /proc/interrupts >> /tmp/hwinfo
+echo "[--- /proc/pci ---]" >> /tmp/hwinfo
+cat /proc/pci >> /tmp/hwinfo
+echo "[--- /proc/meminfo ---]" >> /tmp/hwinfo
+cat /proc/meminfo >> /tmp/hwinfo
+echo "[--- /proc/partitions ---]" >> /tmp/hwinfo
+cat /proc/partitions >> /tmp/hwinfo
+echo "[--- /proc/modules ---]" >> /tmp/hwinfo
+cat /proc/modules >> /tmp/hwinfo
+
diff --git a/urunlevel/my_linux/Trinux/killmod b/urunlevel/my_linux/Trinux/killmod
new file mode 100755
index 0000000..7dc80b6
--- /dev/null
+++ b/urunlevel/my_linux/Trinux/killmod
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+echo "Unloading all kernel modules"
+for i in `lsmod`
+do
+        mod=`echo $i | cut -d' ' -f1`   
+        rmmod $mod 2> /dev/null
+done
diff --git a/urunlevel/my_linux/Trinux/linuxrc b/urunlevel/my_linux/Trinux/linuxrc
new file mode 100755
index 0000000..4597234
--- /dev/null
+++ b/urunlevel/my_linux/Trinux/linuxrc
@@ -0,0 +1,1261 @@
+#!/bin/sh
+#
+# linuxrc - main trinux initialization script
+# 
+# Author:       Matthew Franz <mfranz@cisco.com>
+#           Bill Burdick for the User-Mode-Linux fixes
+########################################################################
+#
+# Attempts to do the following:
+#
+# -  Determine where trinux booted from [ Floppy/CD-ROM/IDE/UML ]
+# -  Mount boot device and copy configuration files to /etc/tux
+# -  Initialize and create ramdisks/tmpfs or mount filesystems
+# -  Determine where packages are located and to be loaded from
+# -  Initialize kernel modules and detect hardware
+# -  Configure and enable networking
+# -  Load and initialize packages
+# -  Initialize system daemons
+#
+########################################################################
+## Define stuff that is probably rejected by busybox
+########################################################################
+
+UMLROOT="/trinux-uml"
+PATH="/usr/bin:/usr/sbin:/bin:/sbin:/usr/local/bin:/usr/local/sbin"
+TERM=linux
+PS1="trinux> "
+PS2='>'
+
+export PATH TERM PS1 PS2 VERSION PKGSRC BOOT PKGSRC BOOTFS FLCFG FXCFG PKGLIST FIXED 
+umask 022
+[ -d /etc/proc ] || mkdir -p /etc/proc
+mount -t proc proc /proc
+mkdir -p /lib/modules
+mkdir -p /etc/tux/config
+ln -sf /proc/self/fd/0 /dev/stdin
+ln -sf /proc/self/fd/2 /dev/stderr
+ln -sf /proc/self/fd/1 /dev/stdout
+
+chmod a+w /tmp
+chmod a+w /dev/null
+
+#####################################################################
+## Gather information about system
+#####################################################################
+
+MEMORY=`grep MemTotal /proc/meminfo | cut -d':' -f2 | cut -d'k' -f1`
+KERNEL=`cat /proc/version | cut -d' ' -f3`
+CDEV=`dmesg | grep D-ROM | grep hd | cut -d: -f1 | sort | uniq`  # CD-ROM devices
+FDEV=`dmesg | grep -v LDM | grep -v "ldm_val" | grep "^ [sh]d[a-f]" | cut -d':' -f2 | sort | uniq`  # FIXED
+
+echo "Checking for fixed disks"
+/sbin/chkfixed
+
+
+
+echo "FDEV: $FDEV"
+echo "CDEV: $CDEV"
+sleep 1
+
+echo "$FDEV" > /tmp/fixed
+
+
+for i in `cat /tmp/fixed`
+do
+        echo $i 
+done  > /etc/proc/fixed
+
+
+[ "$CDEV" ] && echo "$CDEV" >> /etc/proc/fixed
+
+
+#check initial filesytem support
+
+for i in `grep -v nodev /proc/filesystems`
+do
+        echo $i 
+done > /etc/proc/filesystems
+
+
+######################################################################
+### Special Probing stuff
+######################################################################
+
+## Did we boot from UML?
+#if dmesg | grep 'User-mode Linux' > /dev/null
+
+if grep ' ubd' /proc/devices > /dev/null
+then
+        echo "Trinux booted via User Mode Linux (UML)"
+    sleep 3
+    UML="true"
+    BOOT="UML"
+fi
+
+## Did we boot from ms-dos loadlin
+
+echo "Checking all vfat partitions for loadlin.exe"
+
+for i in `cat /etc/proc/fixed 2> /dev/null`
+do
+#       [ -d /${i} ] || mkdir /${i}
+#       echo "Checking $i"
+
+        if mount -o ro -t vfat /dev/${i} /mnt 2> /dev/null
+        then
+                echo -n "VFAT found on $i"
+                if ls /mnt/loadlin.exe 2> /dev/null
+                then
+                        echo -n " found loadlin.exe"
+                        if [ -d /mnt/trinux ]
+                        then
+                                echo " found trinux"
+                                BOOT="/dev/${i}"
+                                BOOTFS="vfat"
+                                echo "BOOT=$BOOT"
+                                echo "$i" > /etc/proc/fixedpkg
+                                LOADLIN="true"
+                                cd /
+                                umount /mnt 2> /dev/null
+                                break
+                        fi              
+                fi
+                
+        fi
+        umount /mnt 2> /dev/null
+done
+
+# Check to see if checking for floppy drive should be disabled
+
+if grep nofloppy /proc/cmdline > /dev/null
+then
+        NOFLOPPY="true"
+        echo "Disabling checks for floppy drive"
+fi
+
+########################################################################
+# Determine where Trinux booted from in order of likelihood
+#
+#   /dev/fd0         - floppy (this is normally the case)
+#   /dev/hd[alpha]   - IDE CD-ROM (usually /dev/hdc)
+#   /dev/hd[numeric] - IDE Hard Disk (including flash disk)
+#
+#  We assume that if a floppy is present and no-›
+#
+########################################################################
+#
+# first check if CD-ROM is present
+
+if [ "$CDEV" ]
+then
+        echo -n "Attempting to mount CD-ROM at $CDEV:"
+
+        if mount -t iso9660 /dev/${CDEV} /mnt 2> /dev/null > /dev/null
+        then
+                echo "successful"
+                if [ -d /mnt/trinux ]
+                then
+                        echo "/trinux found on $CDEV"
+                        PKGSRC=$CDEV # we assume packages will be loaded from it
+                        
+                        # Now check and see if we booted from CD-ROM
+
+                        if [ -d /mnt/isolinux ]
+                        then
+                                BOOT=/dev/${CDEV}
+                                BOOTFS="iso9660"
+                                NOFLOPPY="true"
+                                echo $CDEV > /etc/proc/fixedpkg
+                        fi
+                        cd /
+                        umount /mnt 2> /dev/null
+                fi
+        else
+                echo "failed"
+                [ "$UML" ] || BOOT="/dev/fd0"
+        fi
+fi
+
+if [ ! "$NOFLOPPY" ]
+then
+        echo "Checking for floppy in /dev/fd0"
+        sleep 1
+
+        if mount -t vfat /dev/fd0 /boot 2> /dev/null
+        then
+                [ -d /boot/bootpkg ] && BOOT="/dev/fd0"
+                [ -d /boot/tux ] && FLCFG="true"
+                [ -f /boot/tux/options/floppy ] && PKGSRC="/dev/fd0"
+                umount /boot 2> /dev/null
+
+                [ "$BOOT" = "/dev/fd0" ] && echo "Trinux booted from a floppy."
+                [ "$PKGSRC" = "/dev/fd0" ] && echo "Trinux will load packages from one or more floppies."
+        else
+                echo "Unable to mount boot floppy"
+        fi
+else
+        echo "Floppy checking is disabled"
+fi
+
+echo $BOOT > /etc/proc/boot
+echo $BOOTFS > /etc/proc/bootfs
+
+echo
+echo "========================"
+echo "BOOT: $BOOT"
+echo "KERNEL: $KERNEL"
+echo -n "CDEV: "
+
+if [ $CDEV ]
+then
+        echo "$CDEV"
+else
+        echo "none" 
+fi
+
+echo -n "FDEV: " 
+
+if [ "$FDEV" ]
+then
+        echo $FDEV
+else
+        echo "none" 
+fi
+
+
+## Determine boot filesystem type
+
+if [ "$BOOT" = "/dev/fd0" ] 
+then
+        BOOTFS="vfat"
+elif [ "$UML" ]
+then
+        BOOTFS="ext2"
+elif [ "$BOOT" = "$CDEV" ]
+then
+        BOOTFS="iso9660"        
+fi
+
+echo "BOOTFS: $BOOTFS"
+echo "========================"
+sleep 2
+
+####################################################################
+# Determine where packages should be loaded from. By default, Trinux
+# will look at /etc/tux/config/pkgsrc otherwise it will look at 
+# parameters passed from syslinux.cfg (i.e. pkgsrc=/dev/hda1). 
+# Otherwise Trinux will assume network package loading unlesss
+# the network is unable to be configured
+####################################################################
+
+if grep 'pkg=floppy' /proc/cmdline > /dev/null
+then
+        PKGSRC="/dev/fd0"
+fi
+
+PKGSRC="network"   ## Assume network package loading unless...
+
+#####################################################################
+## Mount the boot filesystem
+## 1) copy config from tux over
+## 2) install kernel module pkgs from kpkg
+#####################################################################
+
+if [ "$UML" ]
+then
+        echo 
+        # mount the host ext2 filesystem RO so initial packages can be installed
+        mount none /boot -t hostfs -o $UMLROOT,ro
+else
+        mount -o ro -t $BOOTFS $BOOT /boot
+        VERSION=`cat /boot/version 2> /dev/null`
+        PS1="Trinux $VERSION> "
+fi
+
+[ "$BOOT" != "/dev/fd0" ] && PREFIX="trinux/"
+
+cd /boot
+
+#pwd
+#ls -al
+
+echo "Copying /tux from boot filesystem..." 
+cp -a ${PREFIX}tux /etc
+
+
+echo "Copying modules from boot filesystem..."
+
+# support either within /trinux/modules or /trinux/*.o
+
+cp ${PREFIX}*.o /lib/modules  2> /dev/null
+cp ${PREFIX}modules/*.o /lib/modules  2> /dev/null
+cp ${PREFIX}modules/*.gz /lib/modules  2> /dev/null
+
+cd /lib/modules
+
+for i in `ls *.gz`
+do
+        FNAME=`basename $i .gz`
+        echo "Uncompressing $i"
+        gunzip $i
+        mv $FNAME $FNAME.o
+done
+
+if [ -f /etc/tux/version ]
+then
+        VERSION=`cat /etc/tux/version 2> /dev/null`
+else
+        VERSION="unknown"
+fi
+
+cd /boot
+if cd ${PREFIX}kpkg 2> /dev/null
+then
+        echo "Installing kernel module packages from boot device"
+        for i in `ls`
+        do
+                pkgadd $i 
+                echo $i >> /etc/proc/kpkg.installed
+        done
+fi
+
+######## Store temporary scripts in scripts directory ###########
+
+if [ -d ${PREFIX}scripts ]
+then
+        echo "Copying local scripts to /bin:"
+        cd ${PREFIX}scripts
+        for i in `ls`
+        do      
+                cp $i /bin/
+                chmod u+x /bin/$i
+        done
+fi
+
+cd /
+umount /boot
+
+echo "Unmounting boot filesystem"
+
+# load in kernel modules
+
+#cd /lib/modules
+
+if [ -f /etc/tux/config/modules ]
+then
+        while read i
+        do
+                echo "Installing $i"
+                insmod /lib/modules/$i  2> /dev/null > /dev/null
+        done < /etc/tux/config/modules
+fi 
+
+
+echo "Waiting for modules to settle..."
+
+sleep 3
+
+#### Since modules have already been loaded now is a good
+#### time to scour the partitions, checking for devices
+
+echo "Checking for fixed disks"
+
+/sbin/chkfixed
+
+#### Check for a saved fixedpkg to avoid checking all found partitions
+
+if [ -f /etc/tux/config/fixedpkg ] 
+then
+        echo -n "Found previously saved fixed package source: "
+        FIXEDPKG=`cat /etc/tux/config/fixedpkg`
+        if [ "$FIXEDPKG" = "cdrom" -o "$FIXEDPKG" = "cd-rom" ]
+        then
+                FIXEDPKG=$CDEV
+        fi
+
+        echo $FIXEDPKG  
+        echo $FIXEDPKG > /etc/proc/fixed
+fi 
+
+for i in `cat /etc/proc/fixed`  # loop through fixed devices
+do
+        [ -d /${i} ] || mkdir /${i}  # create mount point
+
+        for j in `cat /etc/proc/filesystems` # loop through supported fstype
+        do
+                #echo -n "Checking $i:" 
+        if mount -o ro -t $j /dev/$i /$i  2> /dev/null > /dev/null
+                then
+           #echo " found $j"
+           echo "$i:$j" >> /etc/tux/config/fstab
+           umount /dev/$i 2> /dev/null > /dev/null 2> /dev/null
+        else
+            echo
+        fi
+        done
+done
+
+if [ -f /etc/tux/config/fstab ]
+then 
+        echo "The following partitions/filesytems were found:"
+        cat /etc/tux/config/fstab
+        cat /etc/tux/config/fstab | sort | uniq > /tmp/fstab
+        cat /tmp/fstab > /etc/tux/config/fstab
+fi
+
+######### 
+# Search filesystems for /trinux directories 
+
+if [ -f /etc/proc/fixedpkg ]
+then
+        fixedpkg=`cat /etc/proc/fixedpkg`
+        echo "/trinux already found on $fixedpkg, aborting search"
+        mount
+else
+        if [ -f /etc/tux/config/fstab ]
+        then  
+                for i in `cat /etc/tux/config/fstab`
+                do
+                        part=`cut -d: -f1 /etc/tux/config/fstab`
+                        fstype=`cut -d: -f2 /etc/tux/config/fstab`
+
+                        if mount -t $fstype /dev/${part} /mnt 2> /dev/null
+                        then
+                                echo -n "Checking $part for trinux directory: "
+
+                                if [ -d /mnt/trinux/ ]  
+                                then
+                                        echo " found"   
+                                        umount /mnt 2> /dev/null
+                                        echo $part > /etc/proc/fixedpkg
+                                        break
+                                else
+                                        echo " not found"
+                                fi
+
+                                cd /; umount /mnt 2> /dev/null
+                        else
+                                echo -n "Failed to mount $part"
+                        fi
+                done
+        fi
+fi
+
+chmod a+x /etc/tux/init/first 2> /dev/null
+if [  -x /etc/tux/init/first ]
+then
+        . /etc/tux/init/first
+fi
+
+#################################################################
+################### Ramdisk building stuff ######################
+#################################################################
+
+if grep ' 2.4' /proc/version 2> /dev/null
+then
+        echo "Found 2.4.x kernel: tmpfs capable"
+        if [ -f /etc/tux/config/tmpfs ]
+        then
+                echo "Using tmpfs"
+                TMPFS="true"
+        fi
+else
+        TMPFS="false"
+fi
+
+#### If /etc/tux/config/corefs is present we use that for 
+#### partitions *other* than root. If fstab is blank then
+#### everything is mounted as root. Trinux will attempt to mount
+#### to filesystem and will *not* reformat
+####
+#### An additional file (/etc/tux/config/suppfs) will be mounted
+#### later so that nfs/smbfs can be mounted
+####
+#### corefs format
+#### partition:mount point:size in Kb:filesystem:options 
+####
+#### /dev/sda1:/var:512:minix:keep,ro
+####
+####
+#### possible filesystems
+####   vfat, minix, tmpfs, ram (actually minix)
+####
+#### plus anything compiled in your kernel
+
+if [ -f /etc/tux/config/corefs ]
+then   
+        for i in `cat /etc/tux/config/corefs`
+        do 
+                DEV=`echo $i | cut -d: -f1`
+                MOUNT=`echo $i | cut -d: -f2`
+                SIZE=`echo $i | cut -d: -f3`
+                FSTYPE=`echo $i | cut -d: -f4`
+                OPTIONS=`echo $i | cut -d: -f5`
+
+                echo "[DEV: $DEV]"
+                echo "MOUNT: $MOUNT"
+                echo "SIZE: $SIZE"
+                echo "FSTYPE: $FSTYPE"
+                echo "OPTIONS: $OPTIONS"
+
+                if [ ! "$DEV"  ]
+                then 
+                        # if no device is specified, assume tmpfs
+                        mount -n -t tmpfs -o size=${SIZE}000 /dev/null $MOUNT
+                else
+                        mkdir $MOUNT 2> /dev/null
+
+                        if grep "$FSTYPE" /proc/filesystems > /dev/null
+                        then
+                                        if [ ! "$SIZE" ]
+                                        then
+
+                                                # assume entire partition should formatted
+                                                if [ "$FSTYPE" = "minix" ]
+                                                then
+                                                        mkfs.minix $DEV
+                                                        mount -t minix $DEV $MOUNT
+                                                else
+                                                        echo "Currently only minix is supported: skipping $$DEV"
+                                                fi
+
+                                        fi # not $SIZE
+                        else 
+                                # if no FSTYPE is specified, assume minix
+                                mkfs.minix $DEV # 2> /dev/null > /dev/null
+                                mount -t minix $DEV $MOUNT 
+                        fi
+
+                fi      # no $DEV
+        done # loop through each line of corefs
+else
+        #
+        # Autosize ramdisks based on amount of RAM discovered
+        #
+
+        LIB=""
+        VAR=""
+        USR=""
+        USRLOC=""
+        HOMEP=""
+
+        echo "RAM: $MEMORY MB"
+        echo -n "RAM is "
+
+        if [ $MEMORY -lt 16000 ]
+        then
+                echo "< 16MB, you may run into problems"
+                USR="2048"
+                HOMEP="128"
+                VAR="512"
+                PKGMEM="min"
+        #       echo "USR: $USR USRLOC: $USRLOC HOME: $HOMEP"
+        elif [ $MEMORY -lt 24000 ]
+        then
+                echo "> 16MB"
+                USR="4096"
+                HOMEP="256"
+                VAR="512"
+                PKGMEM="16"
+        #       echo "USR: $USR USRLOC: $USRLOC HOME: $HOMEP"
+        elif [ $MEMORY -lt 32000 ]
+        then
+                echo "> 24MB"
+                USR="8192"
+                HOMEP="512"
+                VAR="1024"
+                PKGMEM="24"
+        #       echo "USR: $USR USRLOC: $USRLOC HOME: $HOMEP"
+        elif [ $MEMORY -lt 48000 ]
+        then
+                echo "> 32MB"
+                USR="16384"
+                HOMEP="1024"
+                VAR="1024"
+                LIB="4896"
+                PKGMEM="32"
+
+        #       echo "USR: $USR USRLOC: $USRLOC HOME: $HOMEP"
+        elif [ $MEMORY -lt 64000 ]
+        then
+                echo "> 48MB"
+                USR="16384"
+                LIB="8192"
+                USRLOC="8192"
+                HOMEP="2048"
+                VAR="2048"
+                PKGMEM="48"
+        #       echo "USR: $USR USRLOC: $USRLOC HOME: $HOMEP"
+        elif [ $MEMORY -lt 96000 ]
+        then
+                echo "> 64MB"
+
+                LIB="8192"
+                USR="16384"
+                USRLOC="16384"
+                HOMEP="4096"
+                VAR="2048"
+                PKGMEM="64" 
+        #       echo "USR: $USR USRLOC: $USRLOC HOME: $HOMEP"
+        elif [ $MEMORY -lt 128000 ]
+        then
+                echo "> 96MB"
+                LIB="16384"
+                USR="16384"
+                USRLOC="32768"
+                HOMEP="8192"
+                VAR="4192"
+                PKGMEM="96"
+        #       echo "USR: $USR USRLOC: $USRLOC HOME: $HOMEP"
+        else
+                echo "> 128MB"
+                USR="16384"
+                USRLOC="16384"
+                HOMEP="16384"
+                VAR="4192"
+                PKGMEM="128"
+        #       echo "USR: $USR USRLOC: $USRLOC HOME: $HOMEP"
+        fi
+
+        #if [ "$LIB" != "" ]
+        #then
+        #       echo "Creating /lib"
+        #       echo "USR: $USR USRLOC: $USRLOC HOME: $HOMEP"
+
+        #       if [ "$TMPFS" = "true" ]
+        #       then
+        #               mount -n -t tmpfs -o size=${LIB}000 /dev/null /lib
+        #       else
+        #               mkdir /usr 2> /dev/null
+        #               mkfs.minix /dev/ram3 $LIB 2> /dev/null > /dev/null
+        #               mount -t minix /dev/ram7 /lib
+        #       fi
+        #fi
+
+        if [ "$USR" != "" ]
+        then
+                echo "Creating /usr"
+        #       echo "USR: $USR USRLOC: $USRLOC HOME: $HOMEP"
+
+                if [ "$TMPFS" = "true" ]
+                then
+                        mount -n -t tmpfs -o size=${USR}000 /dev/null /usr
+                else
+                        mkdir /usr 2> /dev/null
+                        mkfs.minix /dev/ram3 $USR 2> /dev/null > /dev/null
+                        mount -t minix /dev/ram3 /usr
+                fi
+        fi
+
+        if [ "$USRLOC" -gt 0 ]
+        then
+
+                echo "Creating /usr/local"
+        #       echo "USR: $USR USRLOC: $USRLOC HOME: $HOMEP"
+                mkdir /usr/local 2> /dev/null
+
+                if [ "$TMPFS" = "true" ]
+                then
+                        mount -n -t tmpfs -o size=${USRLOC}000 /dev/null /usr/local
+                else
+                        mkfs.minix /dev/ram4 $USRLOC 2> /dev/null > /dev/null
+                        mount -t minix /dev/ram4 /usr/local
+                fi
+        fi
+
+        if [ "$HOME" != "" ]
+        then
+                echo "Creating /home"
+                mkdir /home 2> /dev/null
+                if [ "$TMPFS" = "true" ]
+                then
+                        mount -n -t tmpfs -o size=${HOMEP}000 /dev/null /home
+                else
+                        mkfs.minix /dev/ram5 $HOMEP 2> /dev/null > /dev/null
+                        mount -t minix /dev/ram5 /home
+                fi
+        fi
+
+        #
+        # Need to add a check for "physical" var
+        #
+
+        if [ "$VAR" != "" ]
+        then
+                echo "Creating /var"
+                mkdir /var 2> /dev/null
+                if [ "$TMPFS" = "true" ]
+                then
+                        mount -n -t tmpfs -o size=${VAR}000 /dev/null /var
+                else
+                        mkfs.minix /dev/ram5 $VAR 2> /dev/null > /dev/null
+                        mount -t minix /dev/ram6 /var
+                fi
+        fi
+
+fi
+
+############################################################################
+#
+# handle /etc/tux/config/permfs
+#
+# mount "permanent filesystems" -- for now these should be umounted
+# manually to avoid corruption 
+#
+# partition:mount point:filesystem:options 
+#
+############################################################################
+
+
+
+
+if [ -f /etc/tux/config/permfs ]
+then
+        echo "Mounting permanent (non-ramdisk) filesystems based on /etc/tux/config/permfs"
+
+        for  i in `/etc/tux/config/permfs`
+        do
+                DEV=`cat /etc/tux/config/permfs | cut -d":" -f1`
+                MOUNT=`cat /etc/tux/config/permfs | cut -d":" -f2`
+                FSTYPE=`cat /etc/tux/config/permfs | cut -d":" -f3`
+
+                if mount -t $FSTYPE $DEV $MOUNT
+                then
+                        echo "-- $DEV ($FSTYPE) was mounted at $MOUNT"
+                else
+                        echo "-- $DEV ($FSTYPE) failed to mount at $MOUNT!"
+                fi
+        done
+
+        echo "Remember, these must be manually umounted prior to reboot"
+fi
+
+echo "--------------------- FILESYSTEM CONFIGURATION ------------------------"
+df
+sleep 1
+echo "-----------------------------------------------------------------------"
+echo
+
+#################################################################
+#
+# Kludgy stuff to do after the filesystems have been created
+#
+################################################################
+
+echo "Creating misc links and directories..."
+
+mkdir -p /lib/modules/`uname -r`
+touch /lib/modules/`uname -r`/modules.dep
+mkdir /usr/lib/ 2> /dev/null
+ln -sf /lib/terminfo /usr/lib/terminfo
+mkdir /usr/home
+cd /var
+mkdir pkg log spool run 2> /dev/null
+cd log
+cp /dev/null mtp
+cd /
+echo
+
+if [ -f /etc/proc/fixedpkg -o "$UML" ]
+then
+        if [ -f /etc/proc/fixedpkg ]
+        then
+                part=`cat /etc/proc/fixedpkg 2> /dev/null`
+                echo "Trinux packages were found on $part"
+                PKGSRC=$part
+
+                cat /etc/tux/config/fstab | grep $part | cut -d: -f2 2> /dev/null
+
+                fstype=`cat /etc/tux/config/fstab | grep $part | cut -d: -f2 2> /dev/null`
+        fi
+        
+        ##echo "[PKGSRC] = $PKGSRC"
+        ##echo "[fstype] = $fstype"
+
+        if [ "$fstype" ]
+        then
+                if mount -t $fstype /dev/${part} /mnt 2> /dev/null
+                then
+                        mounted="true"  
+                fi
+        fi
+
+
+
+        if [ "$UML" ]
+        then
+                echo -n "Attempting to mount UML host filesystem: "
+                if mount none /mnt -t hostfs -o $UMLROOT,ro      
+                then
+                        mounted="true"
+                        echo "ok"
+                else
+                        echo "failed"
+                fi
+        fi
+
+        echo "[mounted] = $mounted"
+
+        if [ "$mounted" ]
+        then
+                echo "Preparing to load base packages from $part"               
+                if cd /mnt/trinux/bootpkg 2> /dev/null
+                then
+                        for i in `ls *.tgz 2> /dev/null` 
+                        do
+                                pkgadd $i
+                        done
+                else
+                        "No base packages found, hmmm..."
+                fi
+
+                echo "Preparing to load kernel packages from $part"             
+                if cd /mnt/trinux/kpkg 2> /dev/null
+                then    
+                        if [ -f /etc/tux/conf/kpkglist ]
+                        then    
+                                for i in `cat /etc/tux/conf/pkglist`
+                                do
+                                        pkgadd $i
+                                done
+                        else
+                                echo "No kpkglist found, loading everything"
+                                for i in `ls *.tgz 2> /dev/null` 
+                                do
+                                        if grep $i /etc/proc/kpkg.installed > /dev/null 
+                                        then
+                                                echo "$i is already installed."
+                                        else
+                                                pkgadd $i
+                                        fi
+                                done
+                                
+                        fi
+                else
+                        echo "Kernel package directory not found on $part!"
+                fi
+
+                echo "Preparing to load packages from $part"
+                
+                if cd /mnt/trinux/pkg 2> /dev/null
+                then    
+                        if [ -f /etc/tux/conf/pkglist ]
+                        then    
+                                for i in `cat /etc/tux/conf/pkglist`
+                                do
+                                        pkgadd $i
+                                done
+
+                        # NOTE: now the desired behavior is to put whatever
+                        # you want to load into bootpkg
+                        #
+                        #else
+                        #       echo "No pkglist found, loading everything"
+                        #       for i in `ls *.tgz 2> /dev/null` 
+                        #       do 
+                        #               pkgadd $i
+                        #       done
+                                
+                        fi
+                else
+                        echo "Package directory not found on $part!"
+                fi
+
+                cd /
+                umount /mnt
+        else
+                echo -n "Failed to mount $part"
+        fi
+else
+        ### This should only go for a floppy
+        ### Load required packages from boot device
+        ### echo "For some reason we made it here"
+
+        sleep 1
+
+        if mount -t $BOOTFS $BOOT /boot 2> /dev/null
+        then
+                if [ "$PKGSRC" != "$CDEV" ]
+                then 
+                        if cd /boot/bootpkg 
+                        then
+                                echo "Installing base packages from boot device"
+                                for i in `ls`
+                                do
+                                        pkgadd $i 
+                                done
+                                echo
+                        fi
+                fi
+                cd / 
+                umount /boot
+        else
+                echo "Unable to mount $BOOT on $BOOTFS"
+        fi
+        cd /
+        umount /boot 2> /dev/null
+fi
+
+
+[ -x /etc/init.d/pcmcia ] && . /etc/init.d/pcmcia
+
+sleep 1
+
+
+
+
+############### Syslog Configuration ###################
+
+LOGHOST=`cat /etc/tux/options/loghost 2> /dev/null`
+if [ "$LOGHOST" ]
+then
+        if [ "$LOGHOST" = "prompt" ]
+        then
+                echo -n "Enter syslog server: "
+                read $LOGHOST
+        fi
+        $REMOTELOG="-R $LOGHOST"
+fi
+
+echo "Starting syslogd"
+[ -x /sbin/syslogd ] && syslogd $REMOTELOG
+
+#
+# At this point we have loaded all the packages if a CD-ROM
+# boot or package load from fixed partition
+# otherwise base packages have been loaded from the 
+# floppy.  We also have any saved config data. Now we attempt 
+# to configure the network, then load packages from an HTTP/FTP server 
+#
+
+chmod a+x /etc/tux/init/prenet 2> /dev/null
+if [  -x /etc/tux/init/prenet ]
+then
+        . /etc/tux/init/prenet
+fi
+
+
+##### Attempt to initialize networking #######################
+
+
+ifconfig lo 127.0.0.1 up
+
+
+
+# [ "$IPADDR" ] && echo "Network configured successfully"
+
+
+if [ -f /etc/tux/config/eth0 ]
+then 
+        /sbin/net-start
+        IPADDR=`cat /etc/proc/ipaddr 2> /dev/null`
+else
+        echo 'No network configuration found. Type "net-config"'
+fi
+
+if [ -f /etc/tux/config/proxy ] 
+then
+        SNARF_PROXY=`cat /etc/tux/config/proxy`
+        export SNARF_PROXY
+        echo "Found proxy: $SNARF_PROXY"
+        echo
+fi
+
+if [ "$PKGSRC" = "network" ]
+then
+        
+        if [ "$IPADDR" != "" ]
+        then
+                echo "The network was succesfully configured"
+
+                [ -f /etc/tux/config/pkglist ] && PKGLIST=`cat /etc/tux/config/pkglist`
+
+                # attempt to connect to servers in /etc/tux/config/server
+
+                #snarf $server | grep tgz | cut -d">" -f3 | cut -d"<" -f1 > /tmp/packages
+
+                #echo "3" > /proc/sys/net/ipv4/tcp_syn_retries
+                #echo "3" > /proc/sys/net/ipv4/tcp_retries1
+                #echo "3" > /proc/sys/net/ipv4/tcp_retries2
+
+                if [ -f /etc/tux/config/server ]
+                then
+
+                                for SERVER in `cat /etc/tux/config/server`
+                                do
+                                        echo "Contacting $SERVER..."
+                                        if snarf $SERVER > /dev/null 2> /dev/null
+                                        then
+                                                getpkg all
+                                #                       echo; echo "Retrieving base packages from $SERVER"
+                                #               for i in $PKGLIST
+                                #               do
+                                #                       getpkg $i $SERVER
+                                #               done
+                                
+                                                if  [ -f /etc/tux/config/kpkglist ] 
+                                                then
+                                                        KPKGLIST=`cat /etc/tux/config/kpkglist`
+                                                        echo "Retrieving Linux $KERNEL packages from $SERVER"
+                                                        for i in $KPKGLIST
+                                                        do
+                                                                getpkg $KERNEL/${i} $SERVER
+                                                        done
+                                                fi
+
+                                                break
+                                        fi
+                                done
+                fi
+        else            
+                PKGSRC="/dev/fd0"
+        fi
+fi 
+
+if [ "$PKGSRC" = "/dev/fd0" ]
+then
+        echo -n "Do you have a package disk? "
+        read response
+
+        until  [ "$response" != "y" ]
+        do
+                if mount -t vfat -r /dev/fd0 /floppy 2> /dev/null
+                then
+                        cd /floppy
+
+                        if ls *.o > /dev/null 2> /dev/null
+                        then
+                                echo "Copying modules from package disk"
+                                cp *.o /lib/modules 2> /dev/null
+                                cp modules/*.o  /lib/modules 2> /dev/null
+                        fi
+
+                        for i in *.tgz
+                        do
+                                cd /floppy
+                                pkgadd $i
+                        done    
+                fi
+                
+                cd /; umount /floppy
+                echo -n "Do you have another floppy? "
+                read response
+        done
+
+
+        #if ifconfig | grep eth0 /dev/null 2> /dev/null
+        #then
+        #               echo "Network was sucessfully initialized"
+        #else
+        #net-start
+        # fi
+else
+        if echo $PKGSRC | grep "/dev/[sh]d" > /dev/null
+        then
+                echo "Packages will be loaded from fixed disk: $PKGSRC"
+        fi
+fi
+
+
+if [  -x /etc/tux/init/postnet ]
+then
+        chmod a+x /etc/tux/init/postnet 2> /dev/null
+        . /etc/tux/init/postnet
+fi
+
+# Install modules that end up in /lib/modules
+# this will include any on the boot disk
+#
+# Consult /etc/tux/config/modules for any parameters
+# (i.e. irq's io's for NIC modules
+#
+
+# This should be moved to /etc/init.d/system
+
+echo "Enabling port scan (scanlogd)"
+[ -x /sbin/scanlogd ] && scanlogd
+
+
+### Fix the linker/library stuff
+if [ -x /usr/sbin/ldconfig ]
+then
+        echo "Rebuilding ld.so.cache one last time"
+        ldconfig -v 2> /dev/null > /dev/null
+else
+        echo "Unable to rebuild run-time link bindings"
+fi
+
+
+chmod a+x /etc/tux/init/prepkg 2> /dev/null
+if [  -x /etc/tux/init/prepkg ]
+then
+        . /etc/tux/init/prepkg
+fi
+
+[ -x /usr/bin/bash ] && ln -sf /usr/bin/bash /bin/sh
+
+
+
+## This needs to be fixed *bad*
+
+##/sbin/loadmodules # load any last minute kernel modules
+
+chmod a+x /etc/tux/init/last 2> /dev/null
+if [  -x /etc/tux/init/last ]
+then
+        . /etc/tux/init/last
+fi
+
+# Increasing syn_retries to something more reasonable
+echo "7" > /proc/sys/net/ipv4/tcp_syn_retries
+
+######################################################################
+# Set up swap space
+######################################################################
+
+SWAPCONF=`cat /etc/tux/config/swap 2> /dev/null`
+
+if [ "$SWAPCONF" ]
+then
+        echo "Configuring swap space"
+
+        [ -x /sbin/mkswap ] || getpkg swaputil
+
+        SWAPFILE=`echo $SWAPCONF | cut -d: -f1`
+        SWAPSIZE=`echo $SWAPCONF | cut -d: -f2`
+
+        [ "$SWAPSIZE" ] || SWAPSIZE=8192     # default to 8MB swap
+        
+        if echo "$SWAPFILE" | grep "dev" > /dev/null    
+        then
+                # user specified a partition
+                echo "Attempting to use $SWAPFILE for swap partition"
+        else
+                echo "Using $SWAPFILE as your swap file"
+                dd if=/dev/zero of=$SWAPFILE bs=512 count=$SWAPSIZE
+        fi
+
+        mkswap $SWAPFILE
+        swapon $SWAPFILE
+        free
+fi
+
+
+####
+
+if [ -f /etc/tux/config/ipfwd ]
+then
+        echo "Enabling IP forwarding"
+        echo "1" > /proc/sys/net/ipv4/ip_forward
+fi
+
+if [ -f /etc/tux/config/noping ]
+then
+        echo "1" > /proc/sys/net/ipv4/icmp_echo_ignore_all      
+fi
+
+
+
+#### This stuff should all get moved to the system direcotry ######
+###
+#### Notify any emails addr in /etc/tux/options/mailmon that you're up
+
+if [ -f /etc/tux/config/monitor/smtp ]
+then
+    for ADDR in `cat /etc/tux/config/emaildst`
+    do
+        echo | mail $ADDR UP
+    done
+fi
+
+if [ -f /etc/tux/config/monitor/http ]
+then
+        webmon
+        # add to crontab
+        echo '0,10,20,30,40,50 * * * * /usr/sbin/webmon' >> /etc/tux/config/crontab
+fi
+
+if [ -f /etc/tux/config/monitor/cdp ]
+then
+        echo "Starting CDP (Cisco Discovery Protocol)"
+        echo '* * * * * /usr/sbin/cdpdump' >> /etc/tux/config/crontab
+fi
+
+
+if [ -f /etc/tux/config/crontab ]
+then
+        if /usr/sbin/crond 2> /dev/null
+        then
+                echo "Starting crond"
+                sort /etc/tux/config/crontab | uniq > /tmp/crontab 2> /dev/null
+                cat /tmp/crontab > /etc/tux/config/crontab 2> /dev/null
+                /usr/sbin/crontab /etc/tux/config/crontab 2> /dev/null
+                crontab -l
+                echo
+        else
+                echo "Unable to start crond"
+        fi
+else
+        echo "No crontab config found, not starting"
+fi
+
+### Erase /floppy/tux/options/console to disable console access
+### 
+##if [ -f /etc/tux/options/console ]
+##then
+##      [  -f /etc/tux/config/home ] && gethome
+##else
+##      grep -v askfirst /etc/inittab > /etc/inittab.new
+##      rm /etc/inittab
+##      mv /etc/inittab.new /etc/inittab 
+##fi
+
+### Add a hack for dropbear with fixed partition
+
+
+# check for custom /etc/inittab
+
+if [ -f /etc/tux/config/inittab ]
+then
+        echo "Found custom inittab"
+        cp /etc/tux/config/inittab /etc/inittab
+else
+        echo "Using default inittab"
+fi
+
+if [ -x /etc/init.d/dropbear ]
+then
+        killall dropbear >2
+        echo "Restarting dropbear"
+        /etc/init.d/dropbear
+fi
+
+### This shouldn't be necessary, but just in case
+
+if [ -x /usr/local/sbin/sshd ]
+then
+        if ps | grep -v sshd > /dev/null
+        then
+                echo "SSH server failed to start, trying again"
+                /etc/init.d/opensshd    
+        fi
+fi
+
+cat /README | tr '\t' ' ' >  /usr/doc/trinux
+
+#################################################################
+
+sleep 1 
+clear
+echo -n "Welcome to Trinux: A Linux Security Toolkit" 
+if [ "$VERSION" ]
+then
+        echo -n " (version "
+        echo -n $VERSION
+        echo ")"
+fi
+echo
+echo "Type 'man' for a list of help topics or 'man trinux' for docs."
+echo "ALT-<Left/Right> allows you to view other virtual terminals. " 
+echo
diff --git a/urunlevel/my_linux/Trinux/loadmodules b/urunlevel/my_linux/Trinux/loadmodules
new file mode 100755
index 0000000..69c28ad
--- /dev/null
+++ b/urunlevel/my_linux/Trinux/loadmodules
@@ -0,0 +1,30 @@
+#!/bin/sh
+
+ls /lib/modules/*.o > /tmp/modules.in 2> /dev/null
+ls /usr/local/lib/modules/*.o >> /tmp/modules.in 2> /dev/null
+
+sort /tmp/modules.in | uniq > /tmp/modules
+
+for module in `cat /tmp/modules`
+do
+        base=`basename $module`
+        naked=`basename $base .o`
+
+
+        #echo "base: $base"
+        #echo "naked: $naked"
+
+
+        if grep $naked /etc/tux/config/modules 2> /dev/null
+        then
+                param=`grep $naked /etc/tux/config/modules | cut -d' ' -f2- 2> /dev/null`
+                echo "Loading $module $param"
+                if insmod $module $param 2> /dev/null
+                then
+                        echo $module >> /etc/proc/modules.in
+                else
+                        echo $module >> /etc/proc/modules.out
+                fi
+        fi
+done
+        
diff --git a/urunlevel/my_linux/Trinux/net-config b/urunlevel/my_linux/Trinux/net-config
new file mode 100755
index 0000000..2b85baa
--- /dev/null
+++ b/urunlevel/my_linux/Trinux/net-config
@@ -0,0 +1,18 @@
+#!/bin/sh
+
+echo "By default Trinux configures eth0 via DHCP"
+found_faces=`dmesg | grep eth[0-9]: | cut -d: -f1`
+
+
+# Check for pcmcia
+if lsmod | grep pcmcia_core > /dev/null 2> /dev/null
+then
+        echo "PCMCIA modules running"
+        if ifconfig $face | grep UP > /dev/null 2> /dev/null
+        then
+                echo "PCMCIA interface already configured: exiting..."
+                exit  
+        else
+                echo "PCMCIA interface was not configured: trying again"
+        fi
+fi
diff --git a/urunlevel/my_linux/Trinux/net-start b/urunlevel/my_linux/Trinux/net-start
new file mode 100755
index 0000000..a090d85
--- /dev/null
+++ b/urunlevel/my_linux/Trinux/net-start
@@ -0,0 +1,141 @@
+#!/bin/sh
+# net-start
+#
+# can also be run via "start net" or "start network"
+#
+
+
+# find which dhcp client
+
+
+if [ -x /usr/sbin/dhcpcd ]
+then
+        DHCPCLIENT="/usr/sbin/dhcpcd"
+elif [ -x /sbin/udhcpc ]
+then
+        DHCPCLIENT="/sbin/udhcpc"
+else
+        echo "No DHCP client found!"
+fi
+
+/sbin/net-stop  # bring down any interfaces and kill dhcp clients
+
+[ -d /etc/proc ] || mkdir /etc/proc
+
+probed=`dmesg | grep eth[0-9]: | cut -d: -f1`
+
+cd /etc/tux/config/
+found_faces=`ls eth*`
+
+echo "Found configs for: $found_faces" 
+
+# first bring up interfaces
+
+for i in $found_faces
+do
+        echo -n "Configuring $i:"
+                
+        if grep dhcp /etc/tux/config/$i > /dev/null 2> /dev/null
+        then
+                DHCP="true"
+                # things are really easy we just do dhcp
+                echo " using DHCP"
+                killall dhcpcd 2> /dev/null
+                sleep 1
+                if [ $DHCPCLIENT = "/usr/sbin/dhcpcd" ]
+                then
+                        $DHCPCLIENT $i 2> /dev/null
+                else
+                        $DHCPCLIENT -i $i 2> /dev/null
+                fi
+                
+        else # static IP
+        
+                if [ -f /etc/tux/config/$i ]
+                then
+                        echo "settings found"   
+                        IP=`cut -d" " -f1 /etc/tux/config/$i`
+                        MASK=`cut -d" " -f2 /etc/tux/config/$i`
+                        
+                        if [ "$IP" ]
+                        then
+                                ifconfig $i $IP netmask $MASK up
+                        fi
+                        
+                else
+                        echo "no settings found, skipping..."   
+                fi
+        fi
+
+
+        if [ "$i" = "eth0" ]
+        then
+                ifconfig $face | grep inet | cut -d":" -f2 | cut -d" " -f1 | grep -v 127.0.0.1 > /etc/proc/ipaddr 
+                ln -sf /etc/proc/ipaddr /etc/proc/$i
+                nslookup `cat /etc/proc/ipaddr` | grep -v default | grep Name | cut -d":" -f2 | tr -d ' ' | tail -n 1 > /etc/proc/hostname
+        fi
+
+done
+
+if [ "$DHCP" ]
+then
+        echo "Skipping DNS and gateway config"
+else
+        echo -n "Adding default route: "
+
+        GW=`cat /etc/tux/config/gateway`
+
+        echo "$GW"
+        if [ "$GW" ]
+        then
+                route add default gw $GW
+                echo "done"                     
+        else
+                echo "failed"
+        fi
+
+        echo -n "Builing /etc/resolv.conf (DNS): "
+        # need to fix this for multiple DNS servers
+
+        DNS=`cat /etc/tux/config/dns 2>/dev/null`
+
+        if [ "$DNS" ]
+        then
+                echo "nameserver $DNS" > /etc/resolv.conf
+        else
+                echo "failed"
+        fi
+fi
+
+
+# update /etc/hosts and set HOSTNAME
+
+IPADDR=`cat /etc/proc/ipaddr`
+
+if [ -f /etc/tux/config/hostname ]
+then
+        HOSTNAME=`cat /etc/tux/config/hostname`
+else
+        HOSTNAME=`cat /etc/proc/hostname`
+        hlen=`length "$HOSTNAME"` 
+
+        if [ "$hlen" -lt 1 ]
+        then
+                HOSTNAME='trinux'
+        fi
+fi
+
+echo "Setting hostname: $HOSTNAME"
+hostname $HOSTNAME
+
+echo "Building /etc/hosts"
+if [ -f /etc/tux/config/hosts ]
+then
+        cp /etc/tux/config/hosts /etc/hosts
+fi
+
+echo "127.0.0.1    localhost" >> /etc/hosts
+echo "$IPADDR      $HOSTNAME" >> /etc/hosts
+
+sleep 3
+
diff --git a/urunlevel/my_linux/Trinux/net-stop b/urunlevel/my_linux/Trinux/net-stop
new file mode 100755
index 0000000..4b60457
--- /dev/null
+++ b/urunlevel/my_linux/Trinux/net-stop
@@ -0,0 +1,11 @@
+#!/bin/sh
+
+killall udhcpcd 2> /dev/null
+killall dhcpcd 2> /dev/null
+killall pump 2> /dev/mull
+
+for i in `grep eth /proc/net/dev | cut -d: -f1`
+do
+        echo "Bringing down $i"
+        ifconfig $i down 2> /dev/null
+done
diff --git a/urunlevel/my_linux/Trinux/pkgadd b/urunlevel/my_linux/Trinux/pkgadd
new file mode 100755
index 0000000..f04834b
--- /dev/null
+++ b/urunlevel/my_linux/Trinux/pkgadd
@@ -0,0 +1,62 @@
+#!/bin/sh
+#
+# pkgadd - adds trinux packages  (c) 1999 OpenSEC under GPL
+#
+# Author: Matthew Franz <mfranz@cisco.com>
+#
+# $1 = name of package
+#
+##########################################################################
+
+if [ $# -ne 0  ]
+then
+        rm /*.tgz 2> /dev/null; rm /*.md5 2> /dev/null
+
+        # accepting package name with/without tarball extension
+
+        if echo $1 | grep -v tgz > /dev/null
+        then
+                FILE="$1.tgz"
+        else
+                FILE=$1
+        fi
+
+        PREFIX=`echo $FILE | cut -d"." -f1`
+
+        if [ -f $FILE ]
+        then
+                echo "Adding $FILE"
+                PF=`pwd`
+                #cp $FILE /; cd /
+                cd /
+                gunzip -c $PF/${FILE} | tar xf -
+
+        if [ -f /etc/init.d/${PREFIX} ]
+        then
+            chmod a+x /etc/init.d/${PREFIX} 2> /dev/null
+            echo; echo "Initializing package: $PREFIX"
+            /etc/init.d/${PREFIX} 2> /dev/null
+        elif [ -f /etc/init.m/${PREFIX} ]
+        then
+            chmod a+x /etc/init.m/${PREFIX} 2> /dev/null
+            echo; echo "Initializing module: $PREFIX"
+            /etc/init.m/${PREFIX} 2>  /dev/null
+        fi
+
+#               base=`echo $FILE | cut -d"." -f1`
+#               tar xf $base.tar
+
+                #rm $FILE
+
+                [ -x /etc/pkg/$PREFIX ] && ./etc/pkg/$PREFIX
+        else
+                echo "$FILE not found"
+        fi
+
+else                        # no parameters !!
+        echo "Usage: "
+        echo '      pkgadd filename[.tgz] '
+        echo
+fi
+
+
diff --git a/urunlevel/my_linux/Trinux/pkglist b/urunlevel/my_linux/Trinux/pkglist
new file mode 100755
index 0000000..0fc82b0
--- /dev/null
+++ b/urunlevel/my_linux/Trinux/pkglist
@@ -0,0 +1,12 @@
+#!/bin/sh
+
+if [ -f /etc/tux/config/server ]
+then
+        SERVER=`cat /etc/tux/config/server`
+else
+        SERVER="http://trinux.sf.net/pkg"
+fi
+
+snarf $SERVER - | cut -d'"' -f6 | grep "tgz" | sort | more
+
+
diff --git a/urunlevel/my_linux/Trinux/quit b/urunlevel/my_linux/Trinux/quit
new file mode 100755
index 0000000..555644b
--- /dev/null
+++ b/urunlevel/my_linux/Trinux/quit
@@ -0,0 +1,10 @@
+#!/bin/sh
+
+echo "Preparing for reboot..."
+
+savehome
+savecfg
+sync
+sync
+sync
+reboot
diff --git a/urunlevel/my_linux/Trinux/rmpkg b/urunlevel/my_linux/Trinux/rmpkg
new file mode 100755
index 0000000..28e105a
--- /dev/null
+++ b/urunlevel/my_linux/Trinux/rmpkg
@@ -0,0 +1,24 @@
+#!/bin/sh
+
+if [ ! "$1" ]
+then
+        echo "No package specified"; exit
+fi
+
+if [ -f /var/pkg/contents/$1 ]
+then
+
+        echo "Deleting $1:"
+
+        for i in `cat /var/pkg/contents/$1`
+        do
+                if echo $i | grep -v "\/$" 2> /dev/null
+                then
+                        rm /${i} 2> /dev/null
+                fi      
+        done
+
+        rm /var/pkg/contents/$1 2> /dev/null
+else
+        echo "/var/pkg/contents/$1 does not exist!"
+fi
diff --git a/urunlevel/my_linux/Trinux/save-config b/urunlevel/my_linux/Trinux/save-config
new file mode 100755
index 0000000..587728b
--- /dev/null
+++ b/urunlevel/my_linux/Trinux/save-config
@@ -0,0 +1,38 @@
+#!/bin/sh
+
+echo 
+echo "Trinux will save configuration information to the /tux directory"
+echo "on a DOS formatted floppy or to C:\trinux\tux\ if you booted "
+echo "from a fixed disk using loadlin"
+
+if [ -f /etc/proc/boot ]
+then
+        BOOT=`cat /etc/proc/boot`
+else
+        BOOT="/dev/fd0" 
+fi
+
+echo
+echo "Boot device: $BOOT"
+
+if [ "$BOOT" = "/dev/fd0" ]
+then
+        echo -n "Please enter your boot/config floppy, then hit return: "
+        read blah
+else
+        PREFIX="/trinux"
+fi
+
+if mount -t vfat $BOOT /boot 
+then
+        echo "Backing up old configuration"
+        cd /boot${PREFIX} 
+        rm -r tux.bak 2> /dev/null
+        mv tux tux.bak
+        cp -a /etc/tux .
+
+        echo "Unmounting $BOOT"
+        cd /; umount /boot
+else
+        echo "Unable to mount boot device!"
+fi
diff --git a/urunlevel/my_linux/Trinux/savecfg b/urunlevel/my_linux/Trinux/savecfg
new file mode 100755
index 0000000..587728b
--- /dev/null
+++ b/urunlevel/my_linux/Trinux/savecfg
@@ -0,0 +1,38 @@
+#!/bin/sh
+
+echo 
+echo "Trinux will save configuration information to the /tux directory"
+echo "on a DOS formatted floppy or to C:\trinux\tux\ if you booted "
+echo "from a fixed disk using loadlin"
+
+if [ -f /etc/proc/boot ]
+then
+        BOOT=`cat /etc/proc/boot`
+else
+        BOOT="/dev/fd0" 
+fi
+
+echo
+echo "Boot device: $BOOT"
+
+if [ "$BOOT" = "/dev/fd0" ]
+then
+        echo -n "Please enter your boot/config floppy, then hit return: "
+        read blah
+else
+        PREFIX="/trinux"
+fi
+
+if mount -t vfat $BOOT /boot 
+then
+        echo "Backing up old configuration"
+        cd /boot${PREFIX} 
+        rm -r tux.bak 2> /dev/null
+        mv tux tux.bak
+        cp -a /etc/tux .
+
+        echo "Unmounting $BOOT"
+        cd /; umount /boot
+else
+        echo "Unable to mount boot device!"
+fi
diff --git a/urunlevel/my_linux/Trinux/savehome b/urunlevel/my_linux/Trinux/savehome
new file mode 100755
index 0000000..837c639
--- /dev/null
+++ b/urunlevel/my_linux/Trinux/savehome
@@ -0,0 +1,79 @@
+#!/bin/sh
+
+# savehome  - saves home directory to
+
+if [ "$1" ]
+then
+    home=$1
+else
+    home="home"
+fi
+
+
+
+if [ -f /etc/tux/config/home ]
+then
+        PROTO=`cut -d':' -f1 /etc/tux/config/home`
+        HOST=`cut -d':' -f2 /etc/tux/config/home`
+        USER=`cut -d':' -f3 /etc/tux/config/home`
+else
+        echo -n "ftp or ssh: "
+        read PROTO
+        echo -n "Host: "
+        read HOST
+        echo -n "User: "
+        read USER
+        echo $PROTO:$HOST:$USER > /etc/tux/config/home
+fi
+
+[ -d /usr/local/tmp ] || mkdir -p /usr/local/tmp 
+
+cd /
+tar cf - home | gzip -f > /usr/local/tmp/$home.tgz
+echo "Saving home directory to $USER@$HOST via $PROTO"
+
+cd /usr/local/tmp
+
+if [ "$PROTO" = "ssh" ]
+then
+        scp $home.tgz $USER@$HOST:~
+fi
+
+if [ "$PROTO" = "ftp" ]
+then
+        echo "Using FTP to transfor $home.tgz -- your passwords are sniffable"
+        if [ -x /usr/bin/curl ]
+        then
+                curl -u $USER -T $home.tgz ftp://$HOST
+
+        else
+                echo "Curl is not installed.  You will have to login with your" 
+                echo "username and upload $home.tgz manually"
+
+                ftp $HOST
+
+        fi
+fi
+
+if [ "$PROTO" = "fixed" ]
+then
+        if mount -t $PROTO $HOST /mnt
+        then
+                [ "$USER" ] && cd /mnt/$USER
+                cp /usr/local/tmp/$home.tgz .
+                cd /
+                umount /mnt
+        fi
+fi
+
+if [ "$PROTO" = "floppy" ]
+then 
+        if mount -t vfat /dev/fd0 /mnt
+        then
+                cp /usr/local/tmp/$home.tgz /mnt
+                cd /
+                umount /mnt
+        else
+                echo "Unable to mount floppy"
+        fi
+fi
diff --git a/urunlevel/my_linux/Trinux/update b/urunlevel/my_linux/Trinux/update
new file mode 100755
index 0000000..ebeff6b
--- /dev/null
+++ b/urunlevel/my_linux/Trinux/update
@@ -0,0 +1,62 @@
+#!/bin/sh
+
+if [ ! "$*" ]
+then
+        echo
+        echo "Usage: "
+        echo "      update [kernel|initrd|pkglist]"
+        exit
+fi
+
+
+if [ -f /etc/proc/boot ]
+then
+        BOOT=`cat /etc/proc/boot`
+else
+        BOOT="/dev/fd0"
+fi
+
+echo
+echo "Boot device: $BOOT"
+
+if [ "$BOOT" = "/dev/fd0" ]
+then
+        echo -n "Please enter your boot/config floppy, then hit return: "
+        read blah
+else
+        PREFIX="/trinux"
+fi
+
+if mount -t vfat $BOOT /boot
+then
+        if echo $* | grep "initrd"
+        then    
+                INITRD=`cat /etc/tux/config/src/initrd`
+                if [ "$INITRD" ]
+                then
+                        echo "Updating initrd from $INITRD"
+                        cd /tmp
+                        if snarf $INITRD
+                        then
+                                echo -n "Are you sure? "
+                                read quest
+                                if [ "$quest" != "n" ]
+                                then
+                                        echo "Deleting existing initrd.gz"
+                                        cd /boot/$PREFIX
+                                        ls -al
+                                        rm initrd.gz
+                                        mv /tmp/initrd.gz . 
+                                fi
+                        fi
+                else
+                        echo "No initrd found"
+                fi
+        fi
+                
+        sync
+    echo "Unmounting $BOOT"
+    cd /; umount /boot
+else
+        echo "Unable to mount boot device!"
+fi
diff --git a/urunlevel/my_linux/bootrc b/urunlevel/my_linux/bootrc
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/urunlevel/my_linux/bootrc
diff --git a/urunlevel/my_linux/getpkg.c b/urunlevel/my_linux/getpkg.c
new file mode 100644
index 0000000..9127c45
--- /dev/null
+++ b/urunlevel/my_linux/getpkg.c
@@ -0,0 +1,240 @@
+/*
+ * Mini getpkg implementation for busybox.
+ *
+ * Copyright (C) 2004 by David Seikel won_fang@yahoo.com.au
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307 USA
+ *
+ */
+
+#include <string.h>
+#include <errno.h>
+#include <unistd.h>
+#include <sys/utsname.h>                /* for uname(2) */
+
+#include "busybox.h"
+#include "lib_init_d.h"
+#include "my_linux.h"
+
+
+#define GETPKG_OPT_ALL          1
+#define GETPKG_OPT_FILE         2
+#define GETPKG_OPT_KERNEL       4
+
+
+void init_package(char *temp)
+{
+    if (stat(temp, &path_stat) == 0)
+    {
+        doit(0, "chmod a+x %s 2> /dev/null", temp);
+        bb_printf("Initializing %s\n", temp);
+        doit(0, "%s 2> /dev/null", temp);
+    }
+}
+
+
+static char *DEFAULT_PACKAGES = 
+"LIB\n"
+"system\n"
+"baselib\n"
+"term\n"
+"modutil\n"
+"swaputil\n"
+"bash2\n"
+"pthread\n"
+"mc\n"
+"ext2tools\n"
+"sysutil\n"
+"fileutil\n"
+"diskutil\n"
+"modutils\n"
+"portmap\n"
+"openssh\n"
+"links";
+
+static char *DEFAULT_SERVERS =
+"ftp://0.0.0.0/distros/Linux-on-net/Trinux/pkg/\n"
+"ftp://192.168.146.25/distros/Linux-on-net/Trinux/pkg/\n"
+"http://0.0.0.0/ftp/distros/Linux-on-net/Trinux/pkg/\n"
+"http://www.trinux.org/pkg/\n"
+"http://www.io.com/~mdfranz/trinux/pkg/";
+
+static char *DEFAULT_PATHS =
+"/trinux/pkg\n"
+"/trinux/bootpkg\n"
+"/trinux/kpkg\n"
+"/trinux\n"
+"/pkg";
+
+static llist_t *package_head = NULL;   /* growable list of packages */
+static llist_t *source_head = NULL;    /* growable list of sources */
+
+
+int get_package(int opt, char *source, char *package, const char *KERNEL)
+{
+    int result = 0;
+    int incomplete = 0;
+    char *PACKAGE = 0;
+    char *PRE = 0;
+    char *temp = "";
+
+    if (strcmp(&package[bb_strlen(package) - 4], ".tgz") != 0)
+        temp = ".tgz";
+
+    bb_xasprintf(&PACKAGE, "%s%s%s", KERNEL, package, temp);
+    bb_xasprintf(&PRE,  "%s%s", KERNEL, package);
+
+    if (opt & GETPKG_OPT_FILE)
+    {
+        temp = concat_path_file(source, PACKAGE);
+        free(PACKAGE);
+        PACKAGE = temp;
+        bb_printf("Installing %s\n", PACKAGE);
+    }
+    else
+    {
+        char *URL;
+
+        temp = concat_path_file("/tmp", PACKAGE);
+        bb_xasprintf(&URL, "%s%s", source, PACKAGE);
+        free(PACKAGE);
+        PACKAGE = temp;
+
+//bb_printf("Retrieving %s\n", URL);
+        doit(0, "wget -O %s %s", PACKAGE, URL);
+        if (errno)
+            incomplete = 1;
+
+        free(URL);
+    }
+
+    temp = "";
+    if ((incomplete == 0) && (stat(PACKAGE, &path_stat) == 0))
+    {
+        bb_xasprintf(&temp, doit(0, "gunzip -c %s | tar xvf -", PACKAGE));
+        result = 1;
+        if (!(opt & GETPKG_OPT_FILE))
+            remove_file(PACKAGE, FILEUTILS_FORCE);
+    }
+    doit(0, "echo \"%s\" > /var/lib/my_linux/contents/%s", temp, PRE);
+
+    if (result)
+    {
+        free(temp);
+        bb_xasprintf(&temp, "/etc/init.d/%s", PRE);
+        init_package(temp);
+        temp[10] = 'm';
+        init_package(temp);
+        free(temp);
+        bb_xasprintf(&temp, "/etc/pkg/%s", PRE);
+        init_package(temp);
+    }
+
+    free(temp);
+    free(PACKAGE);
+    return result;
+}
+
+
+int getpkg_main(int argc, char **argv)
+{
+    int i;
+    unsigned long opt;
+    char *PACKAGE = 0;
+    char *KERNEL = "";
+    char *SRC = 0;
+    char *token;
+    char *strtok_temp;
+
+    opt = bb_getopt_ulflags(argc, argv, "afk");
+
+    if (argv[optind])
+        PACKAGE = argv[optind++];
+    if (argv[optind])
+        SRC  = argv[optind++];
+    if (PACKAGE == 0)
+        opt |= GETPKG_OPT_ALL;
+    if (opt & GETPKG_OPT_KERNEL)
+    {
+        struct utsname name;
+
+        if (uname(&name) == -1)
+            bb_perror_msg_and_die("cannot get system information");
+        bb_xasprintf(&KERNEL, "%s/", name.release);
+    }
+
+    if (opt & GETPKG_OPT_ALL)
+    {
+        if (PACKAGE != 0)
+        {
+            SRC = PACKAGE;
+            PACKAGE = 0;
+        }
+        PACKAGE = quick_read("/var/lib/my_linux/config/pkglist");
+        if ((PACKAGE == 0) || (PACKAGE[0] == '\0'))
+        {
+            PACKAGE = (char *) xmalloc (sizeof (char) * bb_strlen(DEFAULT_PACKAGES) + 1);
+            strcpy(PACKAGE, DEFAULT_PACKAGES);
+        }
+    }
+
+    if (SRC == 0)
+    {
+        SRC = quick_read("/var/lib/my_linux/config/server");
+        if ((SRC == 0) || (SRC[0] == '\0'))
+        {
+            if (opt & GETPKG_OPT_FILE)
+                token = DEFAULT_PATHS;
+            else
+                token = DEFAULT_SERVERS;
+            SRC = (char *) xmalloc (sizeof (char) * bb_strlen(token) + 1);
+            strcpy(SRC, token);
+        }
+    }
+
+    token = strtok_r(PACKAGE, " \r\n", &strtok_temp);
+    for (i = 0; token != NULL; i++)
+    {
+        package_head = llist_add_to_end(package_head, token);
+        token = strtok_r(NULL, " \r\n", &strtok_temp);
+    }
+
+    token = strtok_r(SRC, " \r\n", &strtok_temp);
+    for (i = 0; token != NULL; i++)
+    {
+        source_head = llist_add_to_end(source_head, token);
+        token = strtok_r(NULL, " \r\n", &strtok_temp);
+    }
+
+
+    llist_t *package_current = package_head;
+    while (package_current) 
+    {
+        int found = 0;
+        llist_t *source_current = source_head;
+
+        while (source_current) 
+        {
+            if ((found = get_package(opt, source_current->data, package_current->data, KERNEL)))
+                break;
+            source_current = source_current->link;
+        }
+
+        package_current = package_current->link;
+    }
+
+    return EXIT_SUCCESS;
+}
diff --git a/urunlevel/my_linux/inittab b/urunlevel/my_linux/inittab
new file mode 100644
index 0000000..2f90616
--- /dev/null
+++ b/urunlevel/my_linux/inittab
@@ -0,0 +1,17 @@
+::sysinit:/sbin/rcS
+#tty1::respawn:/sbin/getty 38400 tty1
+#tty2::respawn:/sbin/getty 38400 tty2
+tty1::respawn:/sbin/getty -inl /usr/sbin/tw1 38400 tty1
+tty2::respawn:/sbin/getty -inl /usr/sbin/tw2 38400 tty2
+tty3::respawn:/sbin/getty -inl /usr/sbin/tw3 38400 tty3
+tty4::respawn:/sbin/getty -inl /usr/sbin/tw4 38400 tty4
+#tty5::respawn:/usr/X11R6/bin/X
+tty9::once:/sbin/rc
+tty10::respawn:/bin/tail -f /var/log/messages
+tty11::once:/bin/dmesg
+tty11::respawn:/sbin/klogd -n
+::ctrlaltdel:/sbin/reboot
+::shutdown:/sbin/rc 0
+::shutdown:/sbin/swapoff -a
+::shutdown:/bin/umount -a -r
+::restart:/sbin/init
diff --git a/urunlevel/my_linux/lib_init_d.h b/urunlevel/my_linux/lib_init_d.h
new file mode 100644
index 0000000..13253e9
--- /dev/null
+++ b/urunlevel/my_linux/lib_init_d.h
@@ -0,0 +1,183 @@
+/*
+ * Copyright (C) 2005 by David Seikel won_fang@yahoo.com.au
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307 USA
+ *
+ */
+
+#ifndef _INIT_D_H
+#define _INIT_D_H
+
+
+/*
+ * init script defines
+ */
+
+#define INIT_D_COMMENT  "\n#// "
+#define INIT_D_BEGIN    "\n### BEGIN INIT INFO "
+#define INIT_D_PROV     "\n# Provides: "
+#define INIT_D_RSTART   "\n# Required-Start: "
+#define INIT_D_RSTOP    "\n# Required-Stop: "
+#define INIT_D_SSTART   "\n# Should-Start: "
+#define INIT_D_SSTOP    "\n# Should-Stop: "
+#define INIT_D_DSTART   "\n# Default-Start: "
+#define INIT_D_DSTOP    "\n# Default-Stop: "
+#define INIT_D_SDESC    "\n# Short-Description: "
+#define INIT_D_DESC     "\n# Description: "
+#define INIT_D_CONT     "\n#\t"
+#define INIT_D_CONT2    "\n#  "
+#define INIT_D_END      "\n### END INIT INFO\n"
+#define INIT_D_CUSTOM   "\n# X-"
+
+
+/*
+ * init info
+ */
+
+typedef struct init_d_info_s {
+        char **provides;
+        char **reqstart;
+        char **reqstop;
+        char **shouldstart;
+        char **shouldstop;
+        int  *defstart;
+        int  *defstop;
+        char *shortdesc;
+        char *desc;
+        char *comment;
+        int sizes[11];
+        char *path;
+        llist_t *start;
+} init_d_info_t;
+
+
+/*
+ * init commands
+ */
+
+typedef struct init_d_handle_s {
+        int (*start)(struct init_d_handle_s *);
+        int (*stop)(struct init_d_handle_s *);
+        int (*restart)(struct init_d_handle_s *);
+        int (*try_restart)(struct init_d_handle_s *);
+        int (*reload)(struct init_d_handle_s *);
+        int (*force_reload)(struct init_d_handle_s *);
+        int (*status)(struct init_d_handle_s *, int);
+        int (*show_info)(struct init_d_handle_s *);
+        char *basename;
+        char *pathname;
+        char *args;
+        char *pidfile;
+        char *info;
+} init_d_handle_t;
+
+
+int do_init_from_main(int argc, char **argv, struct init_d_handle_s *init_d);
+int do_init(struct init_d_handle_s *init_d, const char *command);
+
+int default_start(struct init_d_handle_s *);
+int default_stop(struct init_d_handle_s *);
+int default_restart(struct init_d_handle_s *);
+int default_try_restart(struct init_d_handle_s *);
+int default_reload(struct init_d_handle_s *);
+int default_force_reload(struct init_d_handle_s *);
+int default_status(struct init_d_handle_s *, int);
+int default_show_info(struct init_d_handle_s *);
+
+int no_stop(struct init_d_handle_s *);
+int no_reload(struct init_d_handle_s *);
+int no_status(struct init_d_handle_s *, int);
+
+/*
+ * error codes
+ */
+
+#define INIT_D_OK                       0
+#define INIT_D_ERROR_GENERIC            1
+#define INIT_D_ERROR_ARGS               2
+#define INIT_D_ERROR_NOT_IMPLEMENTED    3
+#define INIT_D_ERROR_SECURITY           4
+#define INIT_D_ERROR_NOT_INSTALLED      5
+#define INIT_D_ERROR_NOT_CONFIGURED     6
+#define INIT_D_ERROR_NOT_RUNNING        7
+
+
+/*
+ * status codes
+ */
+
+#define INIT_D_STATUS_OK                0
+#define INIT_D_STATUS_DEAD_PID          1
+#define INIT_D_STATUS_DEAD_LOCK         2
+#define INIT_D_STATUS_NOT_RUNNING       3
+#define INIT_D_STATUS_UNKNOWN           4
+
+
+/*
+ * /lib/lsb/init-functions
+ */
+int start_daemon(int force, int nice_level, char *pidfile, char *pathname, char *args);
+int killproc(char *pidfile, char *pathname, int my_signal);
+int checkpid(char *pid);
+int pidofproc(char *pidfile, char *pathname, char **pids);
+void log_success_msg(char *message);
+void log_failure_msg(char *message);
+void log_warning_msg(char *message);
+
+
+#define REDIR    1
+#define QUIET    2
+#define ERRONLY  4
+#define FORK     8
+#define NOFORK   16
+#define DAEMON   32
+
+extern struct stat path_stat;
+
+typedef struct nodes_s
+{
+        const char *name;
+        mode_t mode;
+        int major;
+        int minor;
+        int count;
+} nodes_t;
+
+
+char *argv_cat(int argc, char **argv);
+char *big_chomp(char *s);
+int checkpid(char *pid);
+char *doit(int mode, char *command, ...);
+
+#ifndef CONFIG_IFUPDOWN
+#define RUNLEVEL_LIST           1
+#endif
+#ifdef RUNLEVEL_LIST
+// From ifupdown, so it should probably be in libbb.
+llist_t *llist_add_to_end(llist_t *list_head, char *data);
+#else
+extern llist_t *llist_add_to_end(llist_t *list_head, char *data);
+#endif
+
+llist_t *llist_delete(llist_t **unsorted, llist_t *previous, llist_t *current);
+void make_disk(char *token, const nodes_t *nodes);
+void make_ram_disk(int size, int number, char *place, int TMPFS);
+void quick_mount(char *type, char *device, char *path, char *data, ...);
+char *quick_read(char *filename);
+void quick_write(const char *filename, const char *data, ...);
+
+
+#endif
diff --git a/urunlevel/my_linux/linuxrc.c b/urunlevel/my_linux/linuxrc.c
new file mode 100644
index 0000000..15fba1a
--- /dev/null
+++ b/urunlevel/my_linux/linuxrc.c
@@ -0,0 +1,829 @@
+/*
+ * Mini linuxrc implementation for busybox.
+ * An implementation of the linuxrc boot script.
+ *
+ * Copyright (C) 2004 by David Seikel won_fang@yahoo.com.au
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307 USA
+ *
+ */
+
+#include <dirent.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <errno.h>
+#include <signal.h>
+#include <string.h>
+#include <sys/poll.h>
+#include <sys/wait.h>
+#include <sys/utsname.h>                /* for uname(2) */
+
+#include "busybox.h"
+#include "lib_init_d.h"
+#include "my_linux.h"
+
+
+const static char *directories[] =
+{
+    "boot",
+    "dev/pts",
+    "dev/input",
+    "lib",
+    "media/ROOT",
+    "media/cdrom",
+    "media/floppy",
+    "mnt",
+    "opt",
+    "proc",
+    "sbin",
+    "sys",
+    "udev",
+    "usr/bin",
+    "usr/etc/init.d",
+    "usr/lib",
+    "usr/sbin",
+    "var/cache",
+    "var/etc/network/if-down.d",
+    "var/etc/network/if-post-down.d",
+    "var/etc/network/if-pre-up.d",
+    "var/etc/network/if-up.d",
+    "var/etc/sysconfig",
+    "var/home/root",
+    "var/lib/misc",
+    "var/lib/network",
+    "var/lib/my_linux/init.m/done",
+    "var/lib/my_linux/pkg",
+    "var/lib/my_linux/config",
+    "var/lib/my_linux/contents",
+    "var/log",
+    "var/spool/cron/crontabs",
+    "var/temp",
+    "var/tmp",
+#ifdef CONFIG_FEATURE_FULL_LSB
+    "boot/grub",
+    "bin",
+    "dev/net",
+    "etc/X11",
+    "etc/cron.d",
+    "etc/cron.daily",
+    "etc/cron.fortnightly",
+    "etc/cron.hourly",
+    "etc/cron.monthly",
+    "etc/cron.weekly",
+    "etc/cups",
+    "etc/opt",
+    "etc/sgml",
+    "etc/udev",
+    "lib/lsb",
+    "lib/modules/2.6.9/kernel",
+    "opt/bin",
+    "opt/doc",
+    "opt/include",
+    "opt/info",
+    "opt/lib",
+    "opt/man",
+    "usr/X11R6",
+    "usr/X11R6/bin",
+    "usr/X11R6/include/X11",
+    "usr/X11R6/lib/X11",
+    "usr/X11R6/man/en/man8",
+    "usr/doc",
+    "usr/games",
+    "usr/i386-linux-uclibc/include",
+    "usr/i386-linux-uclibc/lib",
+    "usr/i386-linux-uclibc/games",
+    "usr/i386-linux-uclibc/lsb",
+    "usr/include/bsd",
+    "usr/local/bin",
+    "usr/local/games",
+    "usr/local/i386-linux-uclibc/include",
+    "usr/local/i386-linux-uclibc/lib",
+    "usr/local/include",
+    "usr/local/lib",
+    "usr/local/man/en/man8",
+    "usr/local/sbin",
+    "usr/local/share",
+    "usr/local/src",
+    "usr/share/dict",
+    "usr/share/doc",
+    "usr/share/games",
+    "usr/share/ghostscript",
+    "usr/share/groff",
+    "usr/share/info",
+    "usr/share/kbd",
+    "usr/share/locale",
+    "usr/share/man/en/man8",
+    "usr/share/misc/getopt",
+    "usr/share/nls",
+    "usr/share/perl",
+    "usr/share/sgml/docbook",
+    "usr/share/sgml/html/dtd",
+    "usr/share/sgml/tei",
+    "usr/share/terminfo",
+    "usr/share/texmf",
+    "usr/share/zoneinfo",
+    "usr/src/linux-2.6.9/include",
+    "usr/src/packages/BUILD",
+    "usr/src/packages/RPMS/athlon",
+    "usr/src/packages/RPMS/i386",
+    "usr/src/packages/RPMS/i486",
+    "usr/src/packages/RPMS/i586",
+    "usr/src/packages/RPMS/i686",
+    "usr/src/packages/RPMS/noarch",
+    "usr/src/packages/SOURCES",
+    "usr/src/packages/SPECS",
+    "usr/src/packages/SRPMS",
+    "var/account",
+    "var/backups",
+    "var/cache/fonts",
+    "var/cache/man/en/man8",
+    "var/cache/www",
+    "var/cron",
+    "var/games",
+    "var/lib/hwclock",
+    "var/lib/xdm",
+    "var/local",
+    "var/msgs",
+    "var/nis",
+    "var/opt",
+    "var/preserve",
+    "var/spool/lpd",
+    "var/spool/mail",
+    "var/spool/mqueue",
+    "var/spool/news",
+    "var/spool/rwho",
+    "var/spool/uucp",
+    "var/yp",
+#endif
+    NULL
+};
+
+
+const static nodes_t nodes[] =
+{
+        {"initctl",        S_IFIFO,   0,  0, 0},
+        {"log",            S_IFIFO,   0,  0, 0},
+        {"mem",            S_IFCHR,   1,  1, 0},
+        {"kmem",           S_IFCHR,   1,  2, 0},
+        {"port",           S_IFCHR,   1,  4, 0},
+        {"zero",           S_IFCHR,   1,  5, 0},
+        {"full",           S_IFCHR,   1,  7, 0},
+        {"random",         S_IFCHR,   1,  8, 0},
+        {"urandom",        S_IFCHR,   1,  9, 0},
+        {"tty",            S_IFCHR,   5,  0, 0},
+        {"psaux",          S_IFCHR,  10,  1, 0},
+        {"hda",            S_IFBLK,   3,  0, 0},
+        {"hdb",            S_IFBLK,   3, 64, 0},
+        {"hdc",            S_IFBLK,  22,  0, 0},
+        {"hdd",            S_IFBLK,  22, 64, 0},
+        {"ram",            S_IFBLK,   1,  0, 9},
+        {"fd",             S_IFBLK,   2,  0, 1},
+        {"tty",            S_IFCHR,   4,  0,12},
+        {"ttyS",           S_IFCHR,   4, 64,47},
+        {"loop",           S_IFBLK,   7,  0,63},
+        {"cloop",          S_IFBLK, 240,  0, 7},
+        {"vcs",            S_IFBLK,   7,  0, 9},
+        {"vcsa",           S_IFBLK,   7,  0, 9},
+        {"input/keyboard", S_IFCHR,  10,150, 0},
+        {"input/js",       S_IFCHR,  13,  0, 31},
+        {"input/mouse",    S_IFCHR,  13, 32, 30},
+        {"input/mice",     S_IFCHR,  13, 63, 0},
+        {"input/event",    S_IFCHR,  13, 64, 63},
+#ifdef CONFIG_FEATURE_FULL_LSB
+        {"net/tun",        S_IFCHR,  10,200, 0},
+        {"fb0",            S_IFCHR,  29,  0, 0},
+        {"fb1",            S_IFCHR,  29, 32, 0},
+        {"fb2",            S_IFCHR,  29, 64, 0},
+        {"fb3",            S_IFCHR,  29, 96, 0},
+#endif
+        {0, 0, 0, 0, 0}
+};
+
+
+const static char *files[][2] =
+{
+    {"/var/etc/crontab",        ""},
+//    {"/var/etc/fstab",                "none\t/dev/shm\tshm\tdefaults\t0 0\n/\t/dev/ram0\tminix\tdefaults\t0 0\n"},
+    {"/var/etc/fstab",          ""},
+    {"/var/etc/group",          "root:x:0:\ndaemon:x:2:\nshadow:x:42:\nusers:x:100:\nnogroup:x:65534:\n"},
+    {"/var/etc/host.conf",      "order hosts,bind\nmulti on\n"},
+    {"/var/etc/hosts",          "127.0.0.1 localhost\n"},
+    {"/var/etc/inittab",        "::sysinit:/sbin/rcS\ntty1::respawn:/bin/ash\ntty9::once:/sbin/rc 1\ntty11::once:/bin/dmesg\n::ctrlaltdel:/sbin/reboot\n::shutdown:/sbin/rc 0\n::shutdown:/sbin/swapoff -a\n::shutdown:/bin/umount -a -r\n::restart:/sbin/init\n"},
+    {"/var/etc/ld.so.conf",     ""},
+    {"/var/etc/network/interfaces", "auto lo eth0\niface lo inet loopback\niface eth0 inet dhcp\n"},
+    {"/var/etc/passwd",         "root::0:0:My Linux Root:/root:/bin/sh\nftp:x:40:2:ftp:/tmp:/bin/sh\nsshd:x:41:2:sshd:/tmp:/bin/sh\nnobody:x:65534:65534:nobody:/tmp:/bin/sh\n"},
+    {"/var/etc/resolv.conf",    "search cluster.meeting.humbug.org.au\nnameserver 192.168.254.254\n"},
+    {"/var/etc/securetty",      "tty1\n"},
+    {"/var/etc/shells",         "/bin/ash\n/bin/hush\n/bin/lash\n/bin/msh\n/bin/sh\n"},
+#ifdef CONFIG_FEATURE_FULL_LSB
+    {"/boot/grub/device.map",   "(hd0)\t/dev/hda\n(hd1)\t/dev/hdb\n(hd2)\t/dev/hdc\n(hd3)\t/dev/hdd\n(fd0)\t/dev/fd0\n"},
+#endif
+    {NULL, NULL}
+};
+
+
+const static char *scripts[][2] =
+{
+    {"/sbin/shownet",           "#!/bin/sh\necho \"\"\nifconfig\nroute\nip addr list\nip link list\nip route list\necho \"\"\n"},
+    {"/var/etc/profile",        "#!/bin/sh\nPATH=/usr/bin:/usr/sbin:/bin:/sbin\nexport PATH\n"},
+#ifdef CONFIG_FEATURE_FULL_LSB
+#endif
+    {NULL, NULL}
+};
+
+
+const static char *links[][2] =
+{
+    {"/proc/kcore",             "/dev/core"},
+    {"/dev/ram1",               "/dev/ram"},
+    {"/dev/vcs0",               "/dev/vcs"},
+    {"/dev/vcsa0",              "/dev/vcsa"},
+    {"/var/home",               "/home"},
+    {"/home/root",              "/root"},
+    {"/bin/busybox",            "/sbin/init"},
+    {"/bin/busybox",            "/sbin/local_fs"},
+    {"/bin/busybox",            "/sbin/network"},
+    {"/var/temp",               "/tmp"},
+    {"/sbin/local_fs",          "/usr/etc/init.d/local_fs" },
+    {"/sbin/boot_named",        "/usr/etc/init.d/boot_named"},
+    {"/sbin/network",           "/usr/etc/init.d/network"},
+    {"/sbin/boot_portmap",      "/usr/etc/init.d/boot_portmap"},
+    {"/sbin/remote_fs",         "/usr/etc/init.d/remote_fs" },
+    {"/sbin/boot_syslog",       "/usr/etc/init.d/boot_syslog"},
+    {"/sbin/boot_time",         "/usr/etc/init.d/boot_time"},
+    {"/usr/sbin/install_initd", "/usr/lib/lsb/install_initd" },
+    {"/usr/sbin/remove_initd",  "/usr/lib/lsb/remove_initd" },
+    {"/usr/etc/init.d",         "/var/etc/init.d"},
+    {"/usr/etc/protocols",      "/var/etc/protocols"},
+    {"/usr/etc/rpc",            "/var/etc/rpc"},
+    {"/usr/etc/services",       "/var/etc/services"},
+    {"/var/lib/my_linux",       "/var/etc/tux"},
+    {"/.mc",                    "/var/home/root/.mc"},
+    {"/tmp",                    "/var/lock"},
+    {"/tmp",                    "/var/run"},
+#ifdef CONFIG_FEATURE_FULL_LSB
+#endif
+    {NULL, NULL}
+};
+
+
+const static char *modules[] =
+{
+//    "af_packet",
+// Should try all NICS instead.
+// "mii",
+// "ne2k-pci",
+//    "nfs",
+    NULL
+};
+
+
+llist_t *floppies_list = NULL;
+llist_t *cdroms_list = NULL;
+llist_t *hard_disks_list = NULL;
+static void find_all_drives(void)
+{
+    int count;
+    struct dirent **dir;
+
+    if ((floppies_list == NULL) && (cdroms_list == NULL) && (hard_disks_list == NULL))
+    {
+// This is hard coded for now.
+floppies_list = llist_add_to(floppies_list, "fd0");
+        if ((count = scandir("/proc/ide", &dir, 0, alphasort)))
+        {
+            int n;
+
+            for (n = 0; n < count; n++)
+            {
+                struct dirent *script = dir[n];
+                struct stat script_stat;
+                char *info_text = NULL;
+
+                bb_xasprintf(&info_text, "/proc/ide/%s", script->d_name);
+                if (stat(info_text, &script_stat) == 0)
+                {
+                    if (strncmp(info_text, "/proc/ide/hd", 12) == 0)
+                    {
+                        char *text = NULL;
+                        char *name = NULL;
+
+                        bb_xasprintf(&text, "%s", doit(REDIR, "cat %s/media", info_text));
+                        bb_xasprintf(&name, "%s", script->d_name);
+                        if (strcmp(text, "disk") == 0)
+                        {
+// Should add partitions instead.
+                            hard_disks_list = llist_add_to(hard_disks_list, name);
+                        }
+                        else
+                            cdroms_list = llist_add_to(cdroms_list, name);
+                    }
+                    free(info_text);
+                }
+                free(dir[n]);
+            }
+            free(dir);
+        }
+    }
+}
+
+
+static int is_boot_device(char *device, char *image, char **type);
+static int find_boot_device_in_list(llist_t *disks, char *image, char **device, char **type)
+{
+    int result = 0;
+    char *original = *device;
+    llist_t *current = disks;
+
+    while (current) 
+    {
+        char *disc = current->data;
+
+bb_printf("Checking %s for %s\n", disc, image);
+        bb_xasprintf(device, "/dev/%s", disc);
+        if (is_boot_device(*device, image, type))
+        {
+            result = 1;
+            free(*device);
+            bb_xasprintf(device, "/dev/%s", disc);
+            *device = concat_path_file(*device, image);
+            break;
+        }
+        current = current->link;
+        free(*device);
+        *device = original;
+    }
+    return result;
+}
+
+
+static int is_boot_device(char *device, char *image, char **type)
+{
+    int result = 0;
+
+    if (*type == NULL)
+    {
+// Should try to detect it.
+*type = "auto";
+    }
+    quick_mount(*type, device, "/boot", "-o ro");
+    if (errno == 0)
+    {
+        char *dest = concat_path_file("/boot", image);
+
+        if (stat(dest, &path_stat) == 0)
+        {
+            if (stat("/boot/bootrc", &path_stat) == 0)
+                result = 1;
+        }
+        if (result == 0)
+            doit(QUIET, "umount /boot");
+        free(dest);
+    }
+
+    return result;
+}
+
+
+static void pivot_dir(char *place, const char *root)
+{
+    char *dest = concat_path_file(root, place);
+
+    remove_file(place, FILEUTILS_FORCE | FILEUTILS_RECUR);
+    symlink(dest, place);
+    free(dest);
+}
+
+
+static int rebuild_fs(char *root)
+{
+    int result = 0;
+    char *check = concat_path_file(root, "var/lib/distro");
+
+    if (stat(check, &path_stat) == 0)
+    {
+        free(check);
+        bb_printf("Rebuilding root fs from %s.\n", root);
+        check = concat_path_file(root, "bootrc");
+        copy_file(check, "/bootrc", FILEUTILS_FORCE | FILEUTILS_PRESERVE_STATUS);
+        free(check);
+        pivot_dir("/boot", root);
+        pivot_dir("/etc", root);
+        remove_file("/var/etc", FILEUTILS_FORCE | FILEUTILS_RECUR);
+        pivot_dir("/opt", root);
+        pivot_dir("/sbin", root);
+        pivot_dir("/usr", root);
+// Should pivot dev and var if root is writable.
+        check = concat_path_file(root, "dev");
+        copy_file(check, "/dev", FILEUTILS_FORCE | FILEUTILS_RECUR | FILEUTILS_PRESERVE_STATUS);
+        free(check);
+        check = concat_path_file(root, "var");
+        copy_file(check, "/var", FILEUTILS_FORCE | FILEUTILS_RECUR | FILEUTILS_PRESERVE_STATUS);
+//      doit(QUIET, "ln -sf %s/lib/* /lib", root);
+        pivot_dir("/lib", root);
+        doit(0, "/sbin/ldconfig");
+        pivot_dir("/bin", root);
+        result = 1;
+    }
+
+    free(check);
+    return result;
+}
+
+
+void set_boot_env(char *token);
+void read_bootrc(void)
+{
+    if (stat("/bootrc", &path_stat) == 0)
+    {
+        char *line;
+        FILE *contents;
+
+        contents = fopen("/bootrc", "r");
+        if (contents != NULL)
+        {
+            char *buffer = (char *) xmalloc(sizeof (char) * 256);
+
+            bb_printf("Parsing configuration.\n");
+            do
+            {
+                line = fgets(buffer, 255, contents);
+                if (line != NULL)
+                    set_boot_env(buffer);
+            } while (line != NULL);
+        }
+    }
+}
+
+
+void set_boot_env(char *token)
+{
+    int i;
+    char *eq = NULL;
+    char *ha = NULL;
+
+//bb_printf("$$   %s\n", token);
+    for(i = 0; token[i] != '\0'; i++)
+    {
+        switch (token[i])
+        {
+            case '=' :  if (eq == NULL)  eq = &token[i];  break;
+            case '#' :  if (ha == NULL)  ha = &token[i];  break;
+        }
+    }
+
+    if ((eq != token) && (ha != token))
+    {
+        char *name = (char *) xmalloc(sizeof (char) * (i + 5));
+
+        if (eq != NULL)
+            *eq = '\0';
+        if (ha != NULL)
+            *ha = '\0';
+        sprintf(name, "%s", token);
+        trim(name);
+        if (name[0] != '\0')
+        {
+            if (eq != NULL)
+            {
+                setenv(name, &eq[1], 1);
+//bb_printf("  SET %s=%s\n", name, &eq[1]);
+            }
+            else
+            {
+                setenv(name, "", 1);
+//bb_printf("  SET %s=\n", name);
+            }
+        }
+        free(name);
+        if (eq != NULL)
+            *eq = '=';
+        if (ha != NULL)
+            *ha = '#';
+    }
+}
+
+
+int linuxrc_main(int argc, char **argv)
+{
+    int i;
+    int root_write = 0;
+    long MEMORY = 0;
+    char *CMDLINE = 0;
+    char *BOOT = 0;
+    char *ROOT = 0;
+    char *ROOT_TYPE = "auto";
+    char *BOOTFS = 0;
+    char *ROOT_MOUNT = "/media/ROOT";
+//    char *PKGSRC = "network";
+    int  TMPFS = 0;
+    int  USR = 0;
+    int  VAR = 0;
+    char *NFSADDR = 0;
+    char temp[32];
+    char *token;
+    char *strtok_temp;
+    struct sysinfo info;
+    struct utsname name;
+
+    mkrootfs(directories, nodes, files, scripts, links);
+
+    for (i = 0; modules[i] != 0; i++)
+    {
+//bb_printf("\n\n modprobe %s\n\n\n", modules[i]);
+        doit(0, "modprobe %s", modules[i]);
+    }
+//    quick_mount("usbfs",   "usbfs",      "/proc/bus/usb", "");
+
+
+    doit(0, "dmesg >/var/log/dmesg.txt");
+
+    sysinfo(&info);
+    /* Kernels prior to 2.4.x will return info.mem_unit==0, so cope... */
+    if (info.mem_unit==0) {
+        info.mem_unit=1;
+    }
+    if ( info.mem_unit == 1 ) {
+        info.mem_unit=1024;
+
+        /* TODO:  Make all this stuff not overflow when mem >= 4 Gib */
+        info.totalram/=info.mem_unit;
+    } else {
+        info.mem_unit/=1024;
+        /* TODO:  Make all this stuff not overflow when mem >= 4 Gib */
+        info.totalram*=info.mem_unit;
+    }
+    MEMORY = info.totalram;
+    USR = MEMORY / 2.5;
+    VAR = MEMORY / 16;
+
+    if (uname(&name) == -1)
+        bb_perror_msg_and_die("cannot get system information");
+    if (atof(name.release) > 2.4)
+        TMPFS = 1;
+
+    make_ram_disk(VAR, 2, "/var", TMPFS);
+
+    bb_xasprintf(&CMDLINE, "%s", doit(REDIR, "cat /proc/cmdline"));
+//bb_printf("%s\n", CMDLINE);
+    for (token = strtok_r(CMDLINE, " \t\n\r", &strtok_temp); token != NULL; token = strtok_r(NULL, " \t\n\r", &strtok_temp))
+    {
+        if (strcmp(token, "RW") == 0)
+        {
+            root_write = 1;
+            sprintf(temp, "ROOT_MODE=RW");
+            set_boot_env(temp);
+        }
+        else if (strcmp(token, "RO") == 0)
+        {
+            root_write = 0;
+            sprintf(temp, "ROOT_MODE=RO");
+            set_boot_env(temp);
+        }
+    }
+
+    BOOT = getenv("BOOT_IMAGE");
+    if (BOOT != NULL)
+    {
+#define  CDROM          1
+#define  FLOPPY         2
+#define  HD             3
+#define  NETWORK        4
+        int type = 0;
+        int disk = -1;
+        int part = -1;
+        char *image = BOOT;
+        char device[16];
+
+/*
+ * BOOT_IMAGE=(hd0,4)/boot/bzImage
+ * BOOT_IMAGE=(hd3)/boot/bzImage
+ * BOOT_IMAGE=(hdx,y)/boot/bzImage
+ *   translate to /dev/hd(x+1)(y+1)
+ * BOOT_IMAGE=(cd)/boot/bzImage
+ *   scan cd drives
+ * BOOT_IMAGE=/boot/bzImage
+ *   try to avoid this, but scan all disks
+ * BOOT_IMAGE=bzImage
+ *   probably syslinux, assume floppy boot (see next)
+ * BOOT_IMAGE=(fd0)/bzImage
+ *   try to find bootrc on first floppy
+ * BOOT_IMAGE=(nd)/tftpboot/vmlinux
+ *   try to tftp bootrc from network
+ */
+        if ((BOOT[0] == '(') && (BOOT[2] == 'd')  ) /* This is a grub boot, based on my BOOT_IMAGE patch for grub1. */
+        {
+            while (image[0] != '\0')
+            {
+                if (image[0] == ')')
+                {
+                    image++;
+                    break;
+                }
+                image++;
+            }
+            switch (BOOT[1])
+            {
+                case 'c' :  type = CDROM;    break;
+                case 'f' :  type = FLOPPY;   break;
+                case 'h' :  type = HD;       break;
+                case 'n' :  type = NETWORK;  break;
+            }
+            if (BOOT[3] != ')')
+            {
+                disk = atoi(&BOOT[3]) + 1;
+                if (BOOT[4] == ',')
+                    part = atoi(&BOOT[5]) + 1;
+            }
+        }
+
+        device[0] = '\0';
+        switch (type)
+        {
+            case FLOPPY :
+                sprintf(device, "/dev/fd%d", disk - 1);
+                break;
+
+            case HD :
+                sprintf(device, "/dev/hd%c%d", 'a' + disk, part);
+                break;
+
+            case NETWORK :
+                sprintf(device, "tftp:/");
+                break;
+        }
+
+        if (device[0] == '\0')
+        {
+            find_all_drives();
+            if (type == CDROM)
+            {
+                BOOTFS="iso9660";
+                bb_printf("Scanning all CD and DVD drives for %s.\n", image);
+                if (find_boot_device_in_list(cdroms_list, image, &BOOT, &BOOTFS) == 0)
+                    BOOTFS=NULL;
+            }
+            else
+            {
+                BOOTFS="vfat";
+                bb_printf("Scanning all drives for %s.\n", image);
+                if (find_boot_device_in_list(floppies_list, image, &BOOT, &BOOTFS) == 0)
+                {
+                    BOOTFS="iso9660";
+                    if (find_boot_device_in_list(cdroms_list, image, &BOOT, &BOOTFS) == 0)
+                    {
+                        BOOTFS=NULL;
+                        if (find_boot_device_in_list(hard_disks_list, image, &BOOT, &BOOTFS) == 0)
+                            BOOTFS=NULL;
+                    }
+                }
+            }
+        }
+        else
+        {
+            if (type == NETWORK)
+            {
+                bb_xasprintf(&BOOT, "%s%s", device, image);
+                BOOTFS="Network";
+                bb_printf("Kicking network into life.\n");
+                doit(0, "rc network start");
+                if (stat("/var/lib/network/tftpaddr", &path_stat) == 0)
+                {
+                    bb_printf("\nDownloading configuration from network.\n");
+                    doit(QUIET, "tftp -gr /tftpboot/bootrc -l /bootrc %s", quick_read("/var/lib/network/tftpaddr"));
+                }
+                else if (stat("/var/lib/network/nfsaddr", &path_stat) == 0)
+                {
+                    bb_printf("\nDownloading configuration from network.\n");
+                    doit(QUIET, "tftp -gr /tftpboot/bootrc -l /bootrc %s", quick_read("/var/lib/network/nfsaddr"));
+                }
+            }
+            else
+            {
+                bb_xasprintf(&BOOT, "%s%s", device, image);
+                if (is_boot_device(device, image, &BOOTFS))
+                    BOOT=device;
+            }
+        }
+
+        if (BOOTFS == NULL)
+            BOOTFS = "Unknown";
+
+        if (stat("/boot/bootrc", &path_stat) == 0)
+        {
+            bb_printf("Copying configuration from boot filesystem.\n");
+            copy_file("/boot/bootrc", "/bootrc", FILEUTILS_RECUR | FILEUTILS_PRESERVE_STATUS);
+            doit(QUIET, "umount /boot");
+        }
+    }
+    else
+    {
+        BOOT = "";
+        BOOTFS = "";
+    }
+
+    read_bootrc();
+
+    ROOT = getenv("ROOT");
+    if (ROOT == 0)
+    {
+        if (strncmp(BOOT, "/dev/", 5) == 0)
+        {
+            bb_xasprintf(&ROOT, "%s", BOOT);
+            for (i = 5; ROOT[i] != '\0'; i++)
+            {
+                if (ROOT[i] == '/')
+                {
+                    ROOT[i] = '\0';
+                    ROOT_TYPE = BOOTFS;
+                    break;
+                }
+            }
+        }
+    }
+
+/*
+#VERSION=`cat /boot/version 2> /dev/null`
+#PS1="My Linux $VERSION> "
+*/
+
+    bb_printf("================================\n");
+    bb_printf("Kernel: %s %s\n", name.release, TMPFS ? "- tmpfs capable" : "");
+    bb_printf("RAM: %li MB %s\n", MEMORY / 1024, (MEMORY < (16 * 1024)) ? "< 16 MB, you may run into problems" : "" );
+    bb_printf("Boot: %s - %s\n", BOOT, BOOTFS);
+    bb_printf("Root: %s - %s\n", ROOT, root_write ? "read/write" : "read only");
+    bb_printf("================================\n");
+
+/*
+ROOT=/dev/hda6
+ROOT=nfs://REAL/MDS/TEST
+*/
+    if (ROOT == 0)
+    {
+        ;
+    }
+    else
+    {
+        if (strncmp(ROOT, "/dev/", 5) == 0)
+        {
+//      PKGSRC=BOOT;
+// Should fsck this partition first.
+            bb_printf("Mounting %s \n  on %s  as type %s\n", ROOT, ROOT_MOUNT, ROOT_TYPE);
+            make_disk(&ROOT[5], nodes);
+            quick_mount(ROOT_TYPE, ROOT, ROOT_MOUNT, root_write ? "-o rw" : "-o ro");
+        }
+        else if (strncmp(ROOT, "nfs://", 5) == 0)
+        {
+            doit(0, "rc network start");
+            if (stat("/var/lib/network/ipaddr", &path_stat) == 0)
+                NFSADDR = quick_read("/var/lib/network/nfsaddr");
+            if ((NFSADDR != 0) && (NFSADDR[0] != '\0'))
+            {
+                char *NFSMOUNT = 0;
+
+                ROOT_TYPE = "nfs";
+                if (NFSMOUNT == 0)
+                    bb_xasprintf(&NFSMOUNT, "%s:%s", NFSADDR, &ROOT[5]);
+                bb_printf("Mounting %s \n  on %s  as type %s\n", NFSMOUNT, ROOT_MOUNT, ROOT_TYPE);
+                quick_mount(ROOT_TYPE, NFSMOUNT, ROOT_MOUNT, root_write ? "-o nolock,rw" : "-o nolock,ro");
+
+                free(NFSMOUNT);
+            }
+            free(NFSADDR);
+        }
+    }
+
+if (root_write)
+    copy_file("/bin/busybox", "/media/ROOT/bin/busybox", FILEUTILS_FORCE | FILEUTILS_PRESERVE_STATUS);
+
+    if (!rebuild_fs(ROOT_MOUNT))
+    {
+//      make_ram_disk(USR, 3, "/usr", TMPFS);
+//      doit(0, "getpkg");
+    }
+    else
+    {
+        read_bootrc();
+    }
+
+    doit(0, "/sbin/ldconfig");
+
+    free(CMDLINE);
+
+    execl("/sbin/init", "/sbin/init");
+    return EXIT_FAILURE;
+}
+
diff --git a/urunlevel/my_linux/man.c b/urunlevel/my_linux/man.c
new file mode 100644
index 0000000..162cac8
--- /dev/null
+++ b/urunlevel/my_linux/man.c
@@ -0,0 +1,41 @@
+/*
+ * Mini man implementation for busybox.
+ *
+ * Copyright (C) 2004 by David Seikel won_fang@yahoo.com.au
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307 USA
+ *
+ */
+
+#include <unistd.h>
+
+#include "busybox.h"
+#include "lib_init_d.h"
+#include "my_linux.h"
+
+
+int man_main(int argc, char **argv)
+{
+    argv += optind;
+    if (!*argv)
+    {
+        bb_printf("\nThe following manual topics are available:\n");
+        doit(NOFORK, "ls -m /usr/doc");
+    }
+    else
+        doit(NOFORK, "less /usr/doc/%s", *argv);
+    return EXIT_SUCCESS;
+}
diff --git a/urunlevel/my_linux/mkrootfs.c b/urunlevel/my_linux/mkrootfs.c
new file mode 100644
index 0000000..9098be6
--- /dev/null
+++ b/urunlevel/my_linux/mkrootfs.c
@@ -0,0 +1,104 @@
+/*
+ * Copyright (C) 2004 by David Seikel won_fang@yahoo.com.au
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307 USA
+ *
+ */
+
+#include <dirent.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <errno.h>
+#include <signal.h>
+#include <string.h>
+#include <sys/poll.h>
+#include <sys/wait.h>
+#include <sys/utsname.h>                /* for uname(2) */
+
+#include "busybox.h"
+#include "lib_init_d.h"
+
+
+void mkrootfs(const char *directories[], const nodes_t *nodes, const char *files[][2], const char *scripts[][2], const char *links[][2])
+{
+    int i;
+    char temp[64];
+
+    umask(022);
+    sprintf(temp, "/dev");
+    bb_make_directory(temp, -1l, FILEUTILS_RECUR);
+    mknod("/dev/console", S_IFCHR, makedev(4, 0));
+    chmod("/dev/console", S_IRUSR | S_IWUSR);
+    mknod("/dev/null",    S_IFCHR, makedev(1, 3));
+    chmod("/dev/null",    S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH | S_IWOTH);
+    mknod("/dev/ptmx",    S_IFCHR, makedev(5, 2));
+    chmod("/dev/ptmx",    S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
+    sprintf(temp, "/bin");
+    bb_make_directory(temp, -1l, FILEUTILS_RECUR);
+    symlink("/bin/busybox", "/bin/sh");
+
+    bb_printf("\n\nCreating directories, devices, files, and links.\n");
+    for (i = 0; directories[i] != 0; i++)
+    {
+        /* Can't use it directly, coz bb_make_directory segfaults. */
+        sprintf(temp, "/%s", directories[i]);
+        bb_make_directory(temp, -1l, FILEUTILS_RECUR);
+    }
+
+    symlink("/var/etc", "/etc");
+    symlink("/proc/mounts", "/var/etc/mtab");
+    quick_mount("proc",    "proc",       "/proc",    "");
+    quick_mount("sysfs",   "sysfs",      "/sys",     "");
+    for (i = 0; nodes[i].name != 0; i++)
+    {
+        if (nodes[i].count)
+        {
+            int j;
+            for (j = 0; j <= nodes[i].count; j++)
+            {
+                sprintf(temp, "/dev/%s%i", nodes[i].name, j);
+                mknod(temp, nodes[i].mode, makedev(nodes[i].major, nodes[i].minor + j));
+            }
+        }
+        else
+        {
+            sprintf(temp, "/dev/%s", nodes[i].name);
+            mknod(temp, nodes[i].mode, makedev(nodes[i].major, nodes[i].minor));
+        }
+    } 
+
+    for (i = 0; files[i][0] != NULL; i++)
+        quick_write(files[i][0], files[i][1]);
+
+    for (i = 0; scripts[i][0] != NULL; i++)
+    {
+        quick_write(scripts[i][0], scripts[i][1]);
+        chmod(scripts[i][0], S_IRUSR | S_IXUSR | S_IRGRP | S_IXGRP | S_IROTH | S_IXOTH);
+    }
+
+    for (i = 0; links[i][0] != NULL; i++)
+        symlink(links[i][0], links[i][1]);
+
+    quick_mount("devpts",  "devpts",     "/dev/pts", "");
+    doit(0, "busybox --install");
+
+    /* This must be last, as it currently defines a valid install. */
+    /* Can't use it directly, coz bb_make_directory segfaults. */
+    sprintf(temp, "/var/lib/distro");
+    bb_make_directory(temp, -1l, FILEUTILS_RECUR);
+
+    bb_printf("Created.\n");
+}
diff --git a/urunlevel/my_linux/my_linux.h b/urunlevel/my_linux/my_linux.h
new file mode 100644
index 0000000..7be8fe4
--- /dev/null
+++ b/urunlevel/my_linux/my_linux.h
@@ -0,0 +1,27 @@
+/* vi: set sw=4 ts=4: */
+/*
+ * Copyright (C) 2004 by David Seikel won_fang@yahoo.com.au
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307 USA
+ *
+ */
+
+#ifndef _MY_LINUX_H
+#define _MY_LINUX_H
+
+void mkrootfs(const char *directories[], const nodes_t *nodes, const char *files[][2], const char *scripts[][2], const char *links[][2]);
+
+#endif
diff --git a/urunlevel/my_linux/rcS b/urunlevel/my_linux/rcS
new file mode 100755
index 0000000..5d3785e
--- /dev/null
+++ b/urunlevel/my_linux/rcS
@@ -0,0 +1,2 @@
+#!/bin/sh
+/bin/busybox rcS
diff --git a/urunlevel/my_linux/rcS.c b/urunlevel/my_linux/rcS.c
new file mode 100644
index 0000000..6d1f64f
--- /dev/null
+++ b/urunlevel/my_linux/rcS.c
@@ -0,0 +1,47 @@
+/*
+ * Mini rcS implementation for busybox.
+ *
+ * Copyright (C) 2004 by David Seikel won_fang@yahoo.com.au
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307 USA
+ *
+ */
+
+#include <unistd.h>
+
+#include "busybox.h"
+#include "lib_init_d.h"
+#include "my_linux.h"
+
+
+int rcS_main(int argc, char **argv)
+{
+    doit(FORK | QUIET, "gpm -m /dev/input/mice -t exps2 -M -m /dev/ttyS0 -t ms");
+
+//    doit(FORK | QUIET, "/usr/sbin/crond");
+//    if (errno == 0)
+//    {
+//      bb_printf("Starting cron.\n");
+//      doit(0, "sort /etc/crontab | uniq > /tmp/crontab 2> /dev/null");
+//      copy_file("/tmp/crontab", "/etc/crontab", FILEUTILS_FORCE | FILEUTILS_PRESERVE_STATUS);
+//      doit(0, "/usr/sbin/crontab /etc/crontab 2> /dev/null");
+//      doit(0, "crontab -l");
+//    }
+
+    bb_printf("\n\nALT-<Left/Right> allows you to view other virtual terminals.\n");
+
+    return EXIT_SUCCESS;
+}
diff --git a/urunlevel/my_linux/shownet b/urunlevel/my_linux/shownet
new file mode 100755
index 0000000..94f1172
--- /dev/null
+++ b/urunlevel/my_linux/shownet
@@ -0,0 +1,8 @@
+#!/bin/sh
+echo ""
+ifconfig
+route
+ip addr list
+ip link list
+ip route list
+echo ""
diff --git a/urunlevel/my_linux/vt_manager b/urunlevel/my_linux/vt_manager
new file mode 100755
index 0000000..978f2ec
--- /dev/null
+++ b/urunlevel/my_linux/vt_manager
@@ -0,0 +1,22 @@
+#!/bin/sh
+
+runlevel=`cat /etc/runlevel`
+
+if [ -f /var/lib/misc/runlevel ]
+then
+    runlevel=`/var/lib/misc/runlevel`
+fi
+
+if [ "$runlevel" = "3" ]
+then
+    /sbin/getty 38400 tty$1
+elif [ "$runlevel" = "4" ]
+then
+    sleep 1
+    /usr/bin/openvt $1 twdm --quiet --hw=tty@/dev/tty$1,stdout,TERM=linux
+    sleep 1d
+elif [ "$runlevel" = "5" ]
+then
+    /usr/bin/openvt $1 /usr/X11R6/bin/X
+    sleep 1d
+fi
diff --git a/urunlevel/networking/udhcp/dhcpc.h b/urunlevel/networking/udhcp/dhcpc.h
new file mode 100644
index 0000000..25252af
--- /dev/null
+++ b/urunlevel/networking/udhcp/dhcpc.h
@@ -0,0 +1,38 @@
+/* dhcpc.h */
+#ifndef _DHCPC_H
+#define _DHCPC_H
+
+//#define DEFAULT_SCRIPT  "/usr/share/udhcpc/default.script"
+#define DEFAULT_SCRIPT  "/sbin/udhcpc_script"
+
+/* allow libbb_udhcp.h to redefine DEFAULT_SCRIPT */
+#include "libbb_udhcp.h"
+
+#define INIT_SELECTING  0
+#define REQUESTING      1
+#define BOUND           2
+#define RENEWING        3
+#define REBINDING       4
+#define INIT_REBOOT     5
+#define RENEW_REQUESTED 6
+#define RELEASED        7
+
+
+struct client_config_t {
+        char foreground;                /* Do not fork */
+        char quit_after_lease;          /* Quit after obtaining lease */
+        char abort_if_no_lease;         /* Abort if no lease */
+        char background_if_no_lease;    /* Fork to background if no lease */
+        char *interface;                /* The name of the interface to use */
+        char *pidfile;                  /* Optionally store the process ID */
+        char *script;                   /* User script to run at dhcp events */
+        uint8_t *clientid;              /* Optional client id to use */
+        uint8_t *hostname;              /* Optional hostname to use */
+        int ifindex;                    /* Index number of the interface to use */
+        uint8_t arp[6];                 /* Our arp address */
+};
+
+extern struct client_config_t client_config;
+
+
+#endif
diff --git a/urunlevel/networking/udhcp/libbb_udhcp.h b/urunlevel/networking/udhcp/libbb_udhcp.h
new file mode 100644
index 0000000..3204be0
--- /dev/null
+++ b/urunlevel/networking/udhcp/libbb_udhcp.h
@@ -0,0 +1,55 @@
+/* libbb_udhcp.h - busybox compatability wrapper */
+
+/* bit of a hack, do this no matter what the order of the includes.
+ * (for busybox) */
+
+#ifdef CONFIG_INSTALL_NO_USR
+#undef DEFAULT_SCRIPT
+//#define DEFAULT_SCRIPT  "/share/udhcpc/default.script"
+#define DEFAULT_SCRIPT  "/sbin/udhcpc_script"
+#endif
+
+#ifndef _LIBBB_UDHCP_H
+#define _LIBBB_UDHCP_H
+
+#ifdef IN_BUSYBOX
+#include "busybox.h"
+
+#ifdef CONFIG_FEATURE_UDHCP_SYSLOG
+#define UDHCP_SYSLOG
+#endif
+
+#ifdef CONFIG_FEATURE_UDHCP_DEBUG
+#define UDHCP_DEBUG
+#endif
+
+#define COMBINED_BINARY
+#include "version.h"
+
+#define xfopen bb_xfopen
+
+#else /* ! BB_VER */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <sys/sysinfo.h>
+
+#define TRUE                    1
+#define FALSE                   0
+
+#define xmalloc malloc
+#define xcalloc calloc
+
+static inline FILE *xfopen(const char *file, const char *mode)
+{
+        FILE *fp;
+        if (!(fp = fopen(file, mode))) {
+                perror("could not open input file");
+                exit(0);
+        }
+        return fp;
+}
+
+#endif /* BB_VER */
+
+#endif /* _LIBBB_UDHCP_H */
diff --git a/urunlevel/runlevel/Config.in b/urunlevel/runlevel/Config.in
new file mode 100644
index 0000000..36be84b
--- /dev/null
+++ b/urunlevel/runlevel/Config.in
@@ -0,0 +1,110 @@
+#
+# For a description of the syntax of this configuration file,
+# see scripts/kbuild/config-language.txt.
+#
+
+menu "Runlevel Utilities"
+
+config CONFIG_BOOT_NAMED
+        bool "boot_named"
+        default y
+        help
+          An implementation of LSB $named.
+
+config CONFIG_BOOT_PORTMAP
+        bool "boot_portmap"
+        default y
+        help
+          An implementation of LSB $.
+
+config CONFIG_BOOT_SYSLOG
+        bool "boot_syslog"
+        default y
+        help
+          An implementation of LSB $syslog.
+
+config CONFIG_BOOT_TIME
+        bool "boot_time"
+        default y
+        help
+          An implementation of LSB $time.
+
+config CONFIG_INSTALL_INITD
+        bool "install_initd"
+        default y
+        help
+          An implementation of install_initd.
+
+config CONFIG_KILLPROC
+        bool "killproc"
+        default y
+        help
+          An implementation of killproc.
+
+config CONFIG_LOCAL_FS
+        bool "local_fs"
+        default y
+        help
+          A $local_fs boot script.
+
+config CONFIG_LOG_FAILURE_MSG
+        bool "log_failure_msg"
+        default y
+        help
+          An implementation of log_failure_msg.
+
+config CONFIG_LOG_SUCCESS_MSG
+        bool "log_success_msg"
+        default y
+        help
+          An implementation of log_success_msg.
+
+config CONFIG_LOG_WARNING_MSG
+        bool "log_warning_msg"
+        default y
+        help
+          An implementation of log_warning_msg.
+
+config CONFIG_NETWORK
+        bool "network"
+        default y
+        help
+          A $network boot script.
+
+config CONFIG_PIDOFPROC
+        bool "pidofproc"
+        default y
+        help
+          An implementation of pidofproc.
+
+config CONFIG_RC
+        bool "rc"
+        default y
+        help
+          An implementation of rc.
+
+config CONFIG_REMOTE_FS
+        bool "remote_fs"
+        default y
+        help
+          A $remote_fs boot script.
+
+config CONFIG_REMOVE_INITD
+        bool "remove_initd"
+        default y
+        help
+          An implementation of remove_initd.
+
+config CONFIG_START_DAEMON
+        bool "start_daemon"
+        default y
+        help
+          An implementation of start_daemon.
+
+config CONFIG_UDHCPC_SCRIPT
+        bool "udhcpc_script"
+        default y
+        help
+          An implementation of udhcpc.script.
+
+endmenu
diff --git a/urunlevel/runlevel/Makefile b/urunlevel/runlevel/Makefile
new file mode 100644
index 0000000..e7e9466
--- /dev/null
+++ b/urunlevel/runlevel/Makefile
@@ -0,0 +1,32 @@
+# Makefile for busybox
+#
+# Copyright (C) 1999-2004 by Erik Andersen <andersen@codepoet.org>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+
+top_srcdir=..
+top_builddir=..
+srcdir=$(top_srcdir)/runlevel
+RUNLEVEL_DIR:=./
+include $(top_builddir)/Rules.mak
+include $(top_builddir)/.config
+include $(srcdir)/Makefile.in
+all: $(libraries-y)
+-include $(top_builddir)/.depend
+
+clean:
+        rm -f *.o *.a $(AR_TARGET)
+
diff --git a/urunlevel/runlevel/Makefile.in b/urunlevel/runlevel/Makefile.in
new file mode 100644
index 0000000..787dd18
--- /dev/null
+++ b/urunlevel/runlevel/Makefile.in
@@ -0,0 +1,75 @@
+# Makefile for busybox
+#
+# Copyright (C) 1999-2004 by Erik Andersen <andersen@codepoet.org>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+
+RUNLEVEL_AR:=runlevel.a
+ifndef $(RUNLEVEL_DIR)
+RUNLEVEL_DIR:=$(top_builddir)/runlevel/
+endif
+srcdir=$(top_srcdir)/runlevel
+
+RUNLEVEL-y:=
+RUNLEVEL-$(CONFIG_BOOT_NAMED)   += boot_named.o
+RUNLEVEL-$(CONFIG_BOOT_PORTMAP) += boot_portmap.o
+RUNLEVEL-$(CONFIG_BOOT_SYSLOG)  += boot_syslog.o
+RUNLEVEL-$(CONFIG_BOOT_TIME)    += boot_time.o
+RUNLEVEL-$(CONFIG_INSTALL_INITD)        += install_initd.o
+RUNLEVEL-$(CONFIG_KILLPROC)     += killproc.o
+RUNLEVEL-$(CONFIG_LOCAL_FS)     += local_fs.o
+RUNLEVEL-$(CONFIG_LOG_FAILURE_MSG)      += log_failure_msg.o
+RUNLEVEL-$(CONFIG_LOG_SUCCESS_MSG)      += log_success_msg.o
+RUNLEVEL-$(CONFIG_LOG_WARNING_MSG)      += log_warning_msg.o
+RUNLEVEL-$(CONFIG_NETWORK)      += network.o
+RUNLEVEL-$(CONFIG_PIDOFPROC)    += pidofproc.o
+RUNLEVEL-$(CONFIG_RC)   += rc.o
+RUNLEVEL-$(CONFIG_REMOTE_FS)    += remote_fs.o
+RUNLEVEL-$(CONFIG_REMOVE_INITD) += remove_initd.o
+RUNLEVEL-$(CONFIG_START_DAEMON) += start_daemon.o
+RUNLEVEL-$(CONFIG_UDHCPC_SCRIPT)        += udhcpc_script.o
+
+
+#ifeq ($(CONFIG_HALT), y)
+CONFIG_RUNLEVEL_SHARED=y
+#else
+#ifeq ($(CONFIG_INIT), y)
+#CONFIG_RUNLEVEL_SHARED=y
+#else
+#ifeq ($(CONFIG_POWEROFF), y)
+#CONFIG_RUNLEVEL_SHARED=y
+#else
+#ifeq ($(CONFIG_REBOOT), y)
+#CONFIG_RUNLEVEL_SHARED=y
+#else
+#CONFIG_RUNLEVEL_SHARED=n
+#endif
+#endif
+#endif
+#endif
+
+ifeq ($(CONFIG_RUNLEVEL_SHARED), y)
+RUNLEVEL-$(CONFIG_RUNLEVEL_SHARED)        += lib_init_d.o
+endif
+
+libraries-y+=$(RUNLEVEL_DIR)$(RUNLEVEL_AR)
+
+$(RUNLEVEL_DIR)$(RUNLEVEL_AR): $(patsubst %,$(RUNLEVEL_DIR)%, $(RUNLEVEL-y))
+        $(AR) -ro $@ $(patsubst %,$(RUNLEVEL_DIR)%, $(RUNLEVEL-y))
+
+$(RUNLEVEL_DIR)%.o: $(srcdir)/%.c
+        $(CC) $(CFLAGS) $(EXTRA_CFLAGS) -c -o $@ $<
+
diff --git a/urunlevel/runlevel/README b/urunlevel/runlevel/README
new file mode 100644
index 0000000..7c3e2ce
--- /dev/null
+++ b/urunlevel/runlevel/README
@@ -0,0 +1,3 @@
+Busybox does not include named and portmap applets, so boot_named.c and 
+boot_portmap.c should be considered as examples.  Skeleton is also an example.
+
diff --git a/urunlevel/runlevel/TODO b/urunlevel/runlevel/TODO
new file mode 100644
index 0000000..d522d93
--- /dev/null
+++ b/urunlevel/runlevel/TODO
@@ -0,0 +1,55 @@
++ LSB niceness
+* LSB compliance
+! fix bug
+$ store config info in -
+    kernel command line
+    boot://bootrc
+    /etc/sysconfig/*  syslog network/config network/routes
+
+    if (stat("/var/lib/my_linux/config/ipfwd", &path_stat) == 0)
+    if (stat("/var/lib/my_linux/config/noping", &path_stat) == 0)
+    /var/lib/my_linux/config/hostname - hostname
+    /var/lib/my_linux/config/loghost - syslogd remote host
+
+
+  review init.d script dependencies
+    local_fs    -
+    time        ? network?
+    syslog      ? (local_fs? or network) and time
+    network     - syslog
+    remote_fs   - network
+    portmap     - network
+    named       - network and syslog
+
+$ write a proper network & friends
+  add fsck support to local_fs and linuxrc
+  local_fs should only umount things it mounted
+! try to detect ext3 before mount whinges
+! redirect console to some other VT
+
+* do something with info->shouldstart's in rc
++ rc foo start - start dependencies of foo first
++ rc foo stop  - stop things dependent on foo first
+* add a database of runlevels per script
+* add database editing and reporting commands to rc
+
+* finish install_initd & remove_initd
+$ finish boot_syslog
+$ finish boot_time
+! double check status functions
+
++ write init_d_from_script
++ rewrite skeleton to use initd_from_script
+
+! pidofproc needs to check the name of the proc as well as the pid in /proc/$pid
+  remove start_daemon's reliance on start-stop-daemon
+! remove need for sleep(1) in start_daemon
+! fix forking, daemon begat's daemon, and daemonic hell breaks loose.
+    My doit() is probably to blame.
+
+  on boot - hard link /linuxrc to /bin/busybox
+  turn makefs into a full blown applet
+  CONFIG_FEATURE_FULL_LSB
+  permissions for files
+  move cron out of rcS
+
diff --git a/urunlevel/runlevel/boot_named.c b/urunlevel/runlevel/boot_named.c
new file mode 100644
index 0000000..fba83c7
--- /dev/null
+++ b/urunlevel/runlevel/boot_named.c
@@ -0,0 +1,57 @@
+/*
+ * Mini named boot implementation for busybox.
+ *
+ * Copyright (C) 2005 by David Seikel won_fang@yahoo.com.au
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307 USA
+ *
+ */
+
+#include <unistd.h>
+
+#include "busybox.h"
+#include "lib_init_d.h"
+
+
+static init_d_handle_t my_commands =
+{
+    NULL,
+    NULL,
+    NULL,
+    NULL,
+    &sighup_reload,
+    NULL,
+    NULL,
+    NULL,
+    "boot_named",
+    "named",
+    NULL,
+    NULL,
+    INIT_D_BEGIN \
+    INIT_D_PROV "$named" \
+    INIT_D_RSTART "$network $syslog" \
+    INIT_D_DSTART "3 4 5" \
+    INIT_D_DSTOP "0 1 2 6" \
+    INIT_D_SDESC "Hostname resolution service." \
+    INIT_D_DESC "Hostname resolution service." \
+    INIT_D_END
+};
+
+
+int boot_named_main(int argc, char **argv)
+{
+    return do_init_from_main(argc, argv, &my_commands);
+}
diff --git a/urunlevel/runlevel/boot_portmap.c b/urunlevel/runlevel/boot_portmap.c
new file mode 100644
index 0000000..d354b3b
--- /dev/null
+++ b/urunlevel/runlevel/boot_portmap.c
@@ -0,0 +1,78 @@
+/*
+ * Mini portmap boot implementation for busybox.
+ *
+ * Copyright (C) 2005 by David Seikel won_fang@yahoo.com.au
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307 USA
+ *
+ */
+
+#include <unistd.h>
+
+#include "busybox.h"
+#include "lib_init_d.h"
+
+static int restart(struct init_d_handle_s *init_d, int just_checking);
+
+
+static init_d_handle_t my_commands =
+{
+    NULL,
+    NULL,
+    &restart,
+    NULL,
+    NULL,
+    NULL,
+    NULL,
+    NULL,
+    "boot_portmap",
+    "/sbin/portmap",
+    NULL,
+    NULL,
+    INIT_D_BEGIN \
+    INIT_D_PROV "$portmap" \
+    INIT_D_RSTART "$network" \
+    INIT_D_DSTART "3 4 5" \
+    INIT_D_DSTOP "0 1 2 6" \
+    INIT_D_SDESC "RPC port mapper." \
+    INIT_D_DESC "The RPC port mapper provides SunPRC/ONCRPC portmapping" \
+    INIT_D_CONT "services." \
+    INIT_D_END
+};
+
+
+int boot_portmap_main(int argc, char **argv)
+{
+    return do_init_from_main(argc, argv, &my_commands);
+}
+
+
+static const char *state = "/var/run/portmap.state";
+static int restart(struct init_d_handle_s *init_d, int just_checking)
+{
+    int status = (init_d->status)(init_d, 0);
+
+    if (status == INIT_D_STATUS_OK)
+    {
+        doit(0, "pmap_dump > %s", state);
+        status = default_restart(init_d, 0);
+        doit(0, "pmap_set < %s", state);
+        remove_file(state, FILEUTILS_FORCE);
+    }
+    else
+        status = default_restart(init_d, 0);
+    return status;
+}
diff --git a/urunlevel/runlevel/boot_syslog.c b/urunlevel/runlevel/boot_syslog.c
new file mode 100644
index 0000000..dc7548a
--- /dev/null
+++ b/urunlevel/runlevel/boot_syslog.c
@@ -0,0 +1,79 @@
+/*
+ * Mini syslog boot implementation for busybox.
+ *
+ * Copyright (C) 2004 by David Seikel won_fang@yahoo.com.au
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307 USA
+ *
+ */
+
+#include <unistd.h>
+
+#include "busybox.h"
+#include "lib_init_d.h"
+
+
+static int start(struct init_d_handle_s *, int);
+
+
+static init_d_handle_t my_commands =
+{
+    &start,
+    NULL,
+    NULL,
+    NULL,
+    &no_reload,
+    NULL,
+    NULL,
+    NULL,
+    "boot_syslogd",
+    "/sbin/syslogd",
+    "-n",
+    NULL,
+    INIT_D_BEGIN \
+    INIT_D_PROV "$syslog" \
+    INIT_D_RSTART "$local_fs $time" \
+    INIT_D_SSTART "$network" \
+    INIT_D_DSTART "1 2 3 4 5" \
+    INIT_D_DSTOP "0 6" \
+    INIT_D_SDESC "System logger." \
+    INIT_D_DESC "System logger." \
+    INIT_D_END
+};
+
+
+int boot_syslog_main(int argc, char **argv)
+{
+    return do_init_from_main(argc, argv, &my_commands);
+}
+
+
+static int start(struct init_d_handle_s *init_d, int just_checking)
+{
+/*
+#LOGHOST=`cat /var/lib/my_linux/config/loghost 2> /dev/null`
+#if [ "$LOGHOST" ]
+#then
+#    if [ "$LOGHOST" = "prompt" ]
+#    then
+#       echo -n "Enter syslog server: "
+#       read $LOGHOST
+#    fi
+#       $REMOTELOG = "-R $LOGHOST"
+#fi
+*/
+    return default_start(init_d, 0);
+}
diff --git a/urunlevel/runlevel/boot_time.c b/urunlevel/runlevel/boot_time.c
new file mode 100644
index 0000000..aa1fde7
--- /dev/null
+++ b/urunlevel/runlevel/boot_time.c
@@ -0,0 +1,88 @@
+/*
+ * Mini time boot implementation for busybox.
+ *
+ * Copyright (C) 2005 by David Seikel won_fang@yahoo.com.au
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307 USA
+ *
+ */
+
+#include <unistd.h>
+
+#include "busybox.h"
+#include "lib_init_d.h"
+
+
+static int start(struct init_d_handle_s *, int);
+static int status(struct init_d_handle_s *, int);
+static int stop(struct init_d_handle_s *, int);
+
+
+static init_d_handle_t my_commands =
+{
+    &start,
+    &stop,
+    NULL,
+    NULL,
+    &no_reload,
+    NULL,
+    &status,
+    NULL,
+    "boot_time",
+    NULL,
+    NULL,
+    NULL,
+    INIT_D_BEGIN \
+    INIT_D_PROV "$time" \
+    INIT_D_DSTART "1 2 3 4 5" \
+    INIT_D_DSTOP "0 6" \
+    INIT_D_SDESC "Set the system time." \
+    INIT_D_DESC "Set the system time, maybe from the hardware clock," \
+    INIT_D_CONT "maybe from the network via NTP or DATE." \
+    INIT_D_END
+};
+//    INIT_D_SSTART "$network" \
+
+
+int boot_time_main(int argc, char **argv)
+{
+    return do_init_from_main(argc, argv, &my_commands);
+}
+
+
+static int start(struct init_d_handle_s *init_d, int just_checking)
+{
+// Should check if we need to NTP or whatever
+// Should check for -l/-u
+    doit(0, "/sbin/hwclock -su");
+// Should check errno and convert into INIT_D_ERROR_?
+    return INIT_D_OK;
+}
+
+
+static int status(struct init_d_handle_s *init_d, int quiet)
+{
+    return print_status(init_d, quiet, INIT_D_STATUS_OK);
+}
+
+
+static int stop(struct init_d_handle_s *init_d, int just_checking)
+{
+// Should check for -l/-u
+    doit(0, "/sbin/hwclock -wu");
+// Should check errno and convert into INIT_D_ERROR_?
+    return INIT_D_OK;
+}
diff --git a/urunlevel/runlevel/default.script b/urunlevel/runlevel/default.script
new file mode 100755
index 0000000..9b11c8a
--- /dev/null
+++ b/urunlevel/runlevel/default.script
@@ -0,0 +1,2 @@
+#!/bin/bash
+/bin/busybox udhcpc_script
\ No newline at end of file
diff --git a/urunlevel/runlevel/init-functions b/urunlevel/runlevel/init-functions
new file mode 100644
index 0000000..8b2200c
--- /dev/null
+++ b/urunlevel/runlevel/init-functions
@@ -0,0 +1,30 @@
+function start_daemon ()
+{
+    /bin/busybox start_daemon ${1+"$@"}
+}
+
+function killproc ()
+{
+    /bin/busybox killproc ${1+"$@"}
+}
+
+function pidofproc ()
+{
+    /bin/busybox pidofproc ${1+"$@"}
+}
+
+function log_success_msg ()
+{
+    /bin/busybox log_success_msg ${1+"$@"}
+}
+
+function log_failure_msg ()
+{
+    /bin/busybox log_failure_msg ${1+"$@"}
+}
+
+function log_warning_msg ()
+{
+    /bin/busybox log_warning_msg ${1+"$@"}
+}
+
diff --git a/urunlevel/runlevel/inittab b/urunlevel/runlevel/inittab
new file mode 100644
index 0000000..f1e6c11
--- /dev/null
+++ b/urunlevel/runlevel/inittab
@@ -0,0 +1,12 @@
+::sysinit:/sbin/rcS
+tty1::respawn:/sbin/getty 38400 tty1
+tty2::respawn:/sbin/getty 38400 tty2
+tty9::once:/sbin/rc
+tty10::respawn:/bin/tail -f /var/log/messages
+tty11::once:/bin/dmesg
+tty11::respawn:/sbin/klogd -n
+::ctrlaltdel:/sbin/reboot
+::shutdown:/sbin/rc 0
+::shutdown:/sbin/swapoff -a
+::shutdown:/bin/umount -a -r
+::restart:/sbin/init
diff --git a/urunlevel/runlevel/install_initd.c b/urunlevel/runlevel/install_initd.c
new file mode 100644
index 0000000..4b9ab88
--- /dev/null
+++ b/urunlevel/runlevel/install_initd.c
@@ -0,0 +1,48 @@
+/*
+ * Mini install_initd implementation for busybox.
+ *
+ * Copyright (C) 2005 by David Seikel won_fang@yahoo.com.au
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307 USA
+ *
+ */
+
+#include <unistd.h>
+
+#include "busybox.h"
+#include "lib_init_d.h"
+
+
+int install_initd_main(int argc, char **argv)
+{
+    llist_t *sorted = NULL;
+    llist_t *unsorted = get_scripts();
+//    char *info_text = NULL;
+//    char *pathname = NULL;
+//    init_d_info_t *info = NULL;
+
+//    bb_xasprintf(&pathname, "/etc/init.d/%s", script->d_name);
+//    info_text = get_init_info(pathname);
+//    info = parse_init_info(info_text, script->d_name);
+//    if (info)
+//        result = llist_add_to(result, (char *) info);
+
+    sorted = sort_scripts(unsorted);
+// Should return 1 if this script is in unsorted.
+
+//    free(info_text);
+    return EXIT_SUCCESS;
+}
diff --git a/urunlevel/runlevel/killproc.c b/urunlevel/runlevel/killproc.c
new file mode 100644
index 0000000..fd91c10
--- /dev/null
+++ b/urunlevel/runlevel/killproc.c
@@ -0,0 +1,162 @@
+/*
+ * Mini killproc implementation for busybox.
+ *
+ * Copyright (C) 2005 by David Seikel won_fang@yahoo.com.au
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307 USA
+ *
+ */
+
+#include <ctype.h>
+#include <signal.h>
+#include <string.h>
+#include <unistd.h>
+
+#include "busybox.h"
+#include "lib_init_d.h"
+
+
+int killproc(char *pidfile, char *pathname, int my_signal)
+{
+    char *pids = NULL;
+    int status = pidofproc(pidfile, pathname, &pids);
+
+    if (status == INIT_D_STATUS_OK)
+    {
+        int i;
+        char *pid;
+        char *strtok_temp;
+
+        pid = strtok_r(pids, " ", &strtok_temp);
+        for (i = 0; pid != NULL; i++)
+        {
+            int pid_num;
+
+            if (!isdigit(*pid))
+                bb_error_msg( "Bad PID '%s'", pid);
+            pid_num = strtol(pid, NULL, 0);
+            if (my_signal != 0)
+            {
+                if (kill(pid_num, my_signal) != 0)
+                    bb_perror_msg( "Could not kill pid '%d'", pid_num);
+            }
+            else
+            {
+                if (kill(pid_num, SIGTERM) != 0)
+                    bb_perror_msg( "Could not kill pid '%d'", pid_num);
+                sleep(1);
+                status = pidofproc(pidfile, pathname, &pids);
+                if (status == INIT_D_STATUS_OK)
+                {
+                    sleep(5);
+                    status = pidofproc(pidfile, pathname, &pids);
+                    if (status == INIT_D_STATUS_OK)
+                    {
+                        if (kill(pid_num, SIGKILL) != 0)
+                            bb_perror_msg( "Could not kill pid '%d'", pid_num);
+                    }
+                }
+            }
+
+            pid = strtok_r(NULL, " ", &strtok_temp);
+        }
+
+        status = pidofproc(pidfile, pathname, &pids);
+        if (status == INIT_D_STATUS_DEAD_PID)
+        {
+            if (pidfile != NULL)
+                remove_file(pidfile, FILEUTILS_FORCE);
+            status = INIT_D_STATUS_NOT_RUNNING;
+        }
+        if ((my_signal == 0) && (status == INIT_D_STATUS_NOT_RUNNING))
+            status = INIT_D_STATUS_OK;
+    }
+
+    return status;
+}
+
+
+/*
+killproc [-p pidfile] pathname [signal]
+    This stops the specified program. The program is 
+    found using the algorithm given above. If a
+    signal is specified, using the
+    -signal_name or -signal_number syntaxes
+    as specified by the kill command,
+    the program is sent that signal.
+    Otherwise, a SIGTERM followed by a SIGKILL
+    after some number of seconds shall be sent.
+    If a program has been terminated, the pidfile should be removed if the
+    terminated process has not already done so.
+    Compliant applications may use the basename instead of the 
+    pathname.
+
+    killproc should return the LSB defined exit status codes. If called
+    without a signal, it shall return 0 if the program has been stopped or
+    is not running and not 0 otherwise. If a signal is given, it shall return 0
+    only if the program is running.
+*/
+
+
+int killproc_main(int argc, char **argv)
+{
+    int i;
+    int my_signal = 0;
+    char *pidfile = NULL;
+    char *pathname = NULL;
+    char *signame = NULL;
+
+    for (i = 1; i < argc; i++)
+    {
+        char *p = argv[i];
+        
+        if (*p == '-')
+        {
+            p++;
+            if (*p == 'p')
+            {
+                if ((i + 1) < argc)
+                    pidfile = argv[++i];
+                else
+                    bb_show_usage();
+            }
+            else
+                signame = &argv[i][1];
+        }
+        else if (pathname == NULL)
+            pathname = p;
+        else if (signame == NULL)
+            signame = p;
+        else
+            bb_show_usage();
+    }
+
+    if (pathname == NULL)
+        bb_show_usage();
+
+    if (signame != NULL)
+    {
+        u_signal_names(signame, &my_signal, 1);
+        if (my_signal == 0)
+        {
+            log_failure_msg("unknown signal.");
+            bb_show_usage();
+        }
+    }
+
+//bb_printf("ARGS - %s %s %d = %s\n", pidfile, pathname, my_signal, u_signal_names(NULL, &signal, 1));
+    return killproc(pidfile, pathname, my_signal);
+}
diff --git a/urunlevel/runlevel/lib_init_d.c b/urunlevel/runlevel/lib_init_d.c
new file mode 100644
index 0000000..866888c
--- /dev/null
+++ b/urunlevel/runlevel/lib_init_d.c
@@ -0,0 +1,425 @@
+/*
+ * Copyright (C) 2004 by David Seikel won_fang@yahoo.com.au
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307 USA
+ *
+ */
+
+#include <dirent.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <errno.h>
+#include <signal.h>
+#include <string.h>
+#include <sys/poll.h>
+#include <sys/wait.h>
+#include <sys/utsname.h>                /* for uname(2) */
+
+#include "busybox.h"
+#include "lib_init_d.h"
+
+
+static char *shell = 0;
+struct stat path_stat;
+
+
+char *argv_cat(int argc, char **argv)
+{
+    int i;
+    int length = 1;
+    char *message = NULL;
+
+    for (i = 0; i < argc; i++)
+        length += strlen(argv[i]);
+    message = (char *) xmalloc(sizeof (char) * length);
+
+    if (message != NULL)
+    {
+        message[0] = '\0';
+        for (i = 1; i < argc; i++)
+        {
+            strcat(message, argv[i]);
+            if (i < (argc - 1))
+            strcat(message, " ");
+        }
+    }
+    return message;
+}
+
+
+char *big_chomp(char *s)
+{
+    char *lc = index(s, '\n');
+
+    if(lc)
+        *lc = '\0';
+    return s;
+}
+
+
+char *doit(int mode, char *command, ...)
+{
+    int buffsize = 63;
+    char *buffer = NULL;
+    int dataPipe[2] = { -1, -1 };
+    int statusPipe[2] = { -1, -1 };
+    int n;
+    pid_t pid = 0;
+    volatile int vfork_exec_errno = 0;
+    char **args;
+    char *commandBuffer;
+
+    if (mode & DAEMON)
+        mode |= FORK | QUIET;
+
+    va_list p;
+    int r;
+
+    va_start(p, command);
+    r = vasprintf(&commandBuffer, command, p);
+    va_end(p);
+
+    if (r < 0)
+        bb_perror_msg_and_die("doit");
+
+    if (shell == 0)
+    {
+        shell = getenv("SHELL");
+        if (shell == 0)
+            shell = "/bin/sh";
+    }
+
+    args = (char **) xmalloc (sizeof (char *) * 4);
+    n = 0;
+    args[n++] = shell;
+    args[n++] = "-c";
+    if (mode & QUIET)
+        bb_xasprintf(&(args[n++]), "%s 2>/dev/null", commandBuffer);
+    else
+        args[n++] = commandBuffer;
+    args[n++] = 0;
+
+    if (!(mode & NOFORK))
+    {
+        if (!(mode & DAEMON))
+        {
+            if (pipe(dataPipe) < 0 || pipe(statusPipe) < 0) 
+                bb_perror_msg("Failed to create pipe");
+            signal(SIGPIPE, SIG_IGN);   /* we only want EPIPE on errors */
+        }
+//      pid = vfork();
+        pid = fork();
+    }
+    if (pid == 0)  /* child */
+    {
+        if ((!(mode & NOFORK)) && (!(mode & NOFORK)))
+        {
+            close(STDIN_FILENO);
+            dup2(dataPipe[1], STDOUT_FILENO);
+            dup2(dataPipe[1], STDERR_FILENO);
+            close(dataPipe[0]);
+            close(statusPipe[0]);
+            fcntl(statusPipe[1], F_SETFD, FD_CLOEXEC);  /* close on exec shows sucess */
+        }
+
+        if ((mode & DAEMON))
+        {
+            if (!(mode & NOFORK))
+            {
+                close(dataPipe[1]);
+                close(statusPipe[1]);
+                close(STDOUT_FILENO);
+                close(STDERR_FILENO);
+            }
+            daemon(1, 0);
+        }
+        errno = 0;
+        execvp(shell, (char **) args );
+
+        vfork_exec_errno = errno;
+        if (!(mode & NOFORK))
+            close(statusPipe[1]);
+        _exit(-1);
+    }
+    else if (pid > 0)  /* parent */
+    {
+        close(dataPipe[1]);
+        close(statusPipe[1]);
+
+        while (1) 
+        {
+            char buf;
+
+            n = read(statusPipe[0], &buf, 1);
+
+            if ((n < 0) && ((errno == EAGAIN) || (errno == EINTR)) && !(mode & FORK))
+                continue;       /* try it again */
+            else if (n == 0 && vfork_exec_errno != 0)
+            {
+                errno = vfork_exec_errno;
+                bb_perror_msg("Could not exec process");
+            }
+            break;
+        }
+        close(statusPipe[0]);
+
+        if (buffer == NULL)
+            buffer = (char *) xcalloc(buffsize + 1, sizeof (char));
+
+        if ((mode & FORK) == 0)
+        {
+            ssize_t cc;
+            struct pollfd poller[1];
+
+            poller[0].fd      = dataPipe[0];
+            poller[0].events  = POLLIN | POLLPRI;
+            poller[0].revents = 0;
+
+            n = 0;
+            while (1)
+            {
+                if ((buffsize - n) <= 0)
+                {
+                    int i;
+
+                    buffsize += buffsize;
+                    buffer = xrealloc(buffer, sizeof(char) * (buffsize + 1));
+                    for (i = n; i <= buffsize; i++)
+                        buffer[i] = '\0';
+                }
+
+                errno = 0;
+                cc = poll(poller, 1, 1010);  /* network sleeps for 1000 between '.' outputs */
+                if (cc > 0)
+                    cc = read(dataPipe[0], &buffer[n], buffsize - n);
+
+                if (cc < 0)
+                {
+                        if (errno == EINTR)
+                            continue;
+                        if (errno == EAGAIN)
+                            continue;
+                        break;
+                }
+                else if (cc == 0)
+                        break;
+
+                if ((mode & (QUIET | REDIR)) == 0)
+                    bb_printf(&buffer[n]);
+                n += cc;
+            }
+        }
+
+        if (mode & REDIR)
+            chomp(buffer);
+    }
+    else
+    {
+        bb_perror_msg("Failed to fork process");
+    }
+
+    n = 0;
+    if (pid) 
+    {
+        close(dataPipe[0]);
+
+        if ((mode & FORK) == 0)
+        {
+            if (waitpid(pid, &n, 0) == -1)
+                bb_printf("Couldn't wait?");
+        }
+        if (WIFEXITED(n))
+            n = WEXITSTATUS(n);
+        else
+            n = -1;
+    }
+
+    free(args);
+    free(commandBuffer);
+    errno = n;
+    return buffer;
+}
+
+
+#ifdef RUNLEVEL_LIST
+// From ifupdown, so it should probably be in libbb.
+llist_t *llist_add_to_end(llist_t *list_head, char *data)
+{
+        llist_t *new_item, *tmp, *prev;
+
+        new_item = xmalloc(sizeof(llist_t));
+        new_item->data = data;
+        new_item->link = NULL;
+
+        prev = NULL;
+        tmp = list_head;
+        while(tmp)
+        {
+            prev = tmp;
+            tmp = tmp->link;
+        }
+        if (prev)
+            prev->link = new_item;
+        else
+            list_head = new_item;
+
+        return(list_head);
+}
+#endif
+
+
+llist_t *llist_delete(llist_t **head, llist_t *previous, llist_t *current)
+{
+    if (previous == NULL)
+    {
+        *head = current->link;
+        free(current);
+        current = *head;
+    }
+    else
+    {
+        previous->link = current->link;
+        free(current);
+        current = previous->link;
+    }
+
+    return current;
+}
+
+
+void make_disk(char *token, const nodes_t *nodes)
+{
+    int i;
+    char temp[32];
+
+    for (i = 0; nodes[i].name != 0; i++)
+    {
+        if (strncmp(nodes[i].name, token, 3) == 0)
+        {
+            int m = atoi(&token[3]);
+            sprintf(temp, "/dev/%s", token);
+            mknod(temp, nodes[i].mode, makedev(nodes[i].major, nodes[i].minor + m));
+            break;
+        }
+    }
+    sprintf(temp, "/media/%s", token);
+    bb_make_directory(temp, -1l, FILEUTILS_RECUR);
+}
+
+
+void make_ram_disk(int size, int number, char *place, int TMPFS)
+{
+    if (size > 0)
+    {
+        char *place2;
+
+        bb_printf( "Creating ramdisk at %s\n", place);
+        bb_xasprintf(&place2, "%s2", place);
+        if (copy_file(place, place2, FILEUTILS_RECUR | FILEUTILS_PRESERVE_STATUS) >= 0)
+            remove_file(place, FILEUTILS_RECUR | FILEUTILS_FORCE);
+        bb_make_directory (place, -1l, 0);
+        if (TMPFS)
+            quick_mount("tmpfs", "/dev/null", place, "-n -o size=%i", size * 1024);
+        else
+        {
+            doit(QUIET, "mkfs.minix /dev/ram%i %i", number, size);
+            quick_mount("minix", "", "", "/dev/ram%i %s", number, place);
+        }
+        if (copy_file(place2, place, FILEUTILS_RECUR | FILEUTILS_PRESERVE_STATUS) >= 0)
+            remove_file(place2, FILEUTILS_RECUR | FILEUTILS_FORCE);
+        free(place2);
+    }
+}
+
+
+void quick_mount(char *type, char *device, char *path, char *data, ...)
+{
+    char *dataBuffer;
+    va_list p;
+    int r;
+
+    va_start(p, data);
+    r = vasprintf(&dataBuffer, data, p);
+    va_end(p);
+    if (r < 0)
+        bb_perror_msg("quick_mount");
+    else
+    {
+        doit(QUIET, "busybox mount -t %s %s %s %s", type, device, path, dataBuffer);
+    }
+
+    free(dataBuffer);
+}
+
+
+char *quick_read(char *filename)
+{
+    char *result = NULL;
+
+    if (stat(filename, &path_stat) == 0)
+    {
+//      if (S_ISREG(path_stat.st_mode))
+        {
+            int ifd;
+            ssize_t size = path_stat.st_size;
+
+            if (size <= 0)
+                size = 1024;
+            result = (char *) xmalloc (sizeof (char) * size + 1);
+            if ((ifd = open(filename, O_RDONLY)) < 0)
+                bb_perror_msg("%s", filename);
+            else
+            {
+                ssize_t total = bb_full_read(ifd, result, size);
+//              result[path_stat.st_size] = '\0';
+                result[total] = '\0';
+                if (close (ifd) < 0)
+                    bb_perror_msg("%s", filename);
+            }
+        }
+    }
+
+    return result;
+}
+
+
+void quick_write(const char *filename, const char *data, ...)
+{
+    char *dataBuffer;
+    va_list p;
+    int r;
+
+    va_start(p, data);
+    r = vasprintf(&dataBuffer, data, p);
+    va_end(p);
+    if (r >= 0)
+    {
+        int ofd;
+
+        if ((ofd = open(filename, O_WRONLY | O_CREAT | O_TRUNC, 0666)) < 0)
+            bb_perror_msg("%s", filename);
+        else
+        {
+            r = bb_full_write(ofd, dataBuffer, r);
+            if (close (ofd) < 0)
+                bb_perror_msg("%s", filename);
+        }
+    }
+    if (r < 0)
+        bb_perror_msg("quick_write");
+
+    free(dataBuffer);
+}
diff --git a/urunlevel/runlevel/lib_init_d.h b/urunlevel/runlevel/lib_init_d.h
new file mode 100644
index 0000000..a9179d5
--- /dev/null
+++ b/urunlevel/runlevel/lib_init_d.h
@@ -0,0 +1,202 @@
+/*
+ * Copyright (C) 2005 by David Seikel won_fang@yahoo.com.au
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307 USA
+ *
+ */
+
+#ifndef _INIT_D_H
+#define _INIT_D_H
+
+
+/*
+ * init script defines
+ */
+
+#define INIT_D_COMMENT  "\n#// "
+#define INIT_D_BEGIN    "\n### BEGIN INIT INFO "
+#define INIT_D_PROV     "\n# Provides: "
+#define INIT_D_RSTART   "\n# Required-Start: "
+#define INIT_D_RSTOP    "\n# Required-Stop: "
+#define INIT_D_SSTART   "\n# Should-Start: "
+#define INIT_D_SSTOP    "\n# Should-Stop: "
+#define INIT_D_DSTART   "\n# Default-Start: "
+#define INIT_D_DSTOP    "\n# Default-Stop: "
+#define INIT_D_SDESC    "\n# Short-Description: "
+#define INIT_D_DESC     "\n# Description: "
+#define INIT_D_CONT     "\n#\t"
+#define INIT_D_CONT2    "\n#  "
+#define INIT_D_END      "\n### END INIT INFO\n"
+#define INIT_D_CUSTOM   "\n# X-"
+
+
+/*
+ * init info
+ */
+
+typedef struct init_d_info_s {
+        char **provides;
+        char **reqstart;
+        char **reqstop;
+        char **shouldstart;
+        char **shouldstop;
+        int  *defstart;
+        int  *defstop;
+        char *shortdesc;
+        char *desc;
+        char *comment;
+        int sizes[11];
+        char *path;
+        llist_t *start;
+} init_d_info_t;
+
+
+/*
+ * init commands
+ */
+
+typedef struct init_d_handle_s {
+        int (*start)(struct init_d_handle_s *, int);
+        int (*stop)(struct init_d_handle_s *, int);
+        int (*restart)(struct init_d_handle_s *, int);
+        int (*try_restart)(struct init_d_handle_s *, int);
+        int (*reload)(struct init_d_handle_s *, int);
+        int (*force_reload)(struct init_d_handle_s *, int);
+        int (*status)(struct init_d_handle_s *, int);
+        int (*show_info)(struct init_d_handle_s *, int);
+        char *basename;
+        char *pathname;
+        char *args;
+        char *pidfile;
+        char *info;
+} init_d_handle_t;
+
+
+int do_init_from_main(int argc, char **argv, struct init_d_handle_s *init_d);
+int do_init(struct init_d_handle_s *init_d, const char *command);
+
+int default_start(struct init_d_handle_s *, int);
+int default_stop(struct init_d_handle_s *, int);
+int default_restart(struct init_d_handle_s *, int);
+int default_try_restart(struct init_d_handle_s *, int);
+int default_reload(struct init_d_handle_s *, int);
+int default_force_reload(struct init_d_handle_s *, int);
+int default_status(struct init_d_handle_s *, int);
+int default_show_info(struct init_d_handle_s *, int);
+
+int no_stop(struct init_d_handle_s *, int);
+int no_reload(struct init_d_handle_s *, int);
+int no_status(struct init_d_handle_s *, int);
+
+int sighup_reload(struct init_d_handle_s *, int);
+int print_status(struct init_d_handle_s *init_d, int quiet, int status);
+
+/*
+ * error codes
+ */
+
+#define INIT_D_OK                       0
+#define INIT_D_ERROR_GENERIC            1
+#define INIT_D_ERROR_ARGS               2
+#define INIT_D_ERROR_NOT_IMPLEMENTED    3
+#define INIT_D_ERROR_SECURITY           4
+#define INIT_D_ERROR_NOT_INSTALLED      5
+#define INIT_D_ERROR_NOT_CONFIGURED     6
+#define INIT_D_ERROR_NOT_RUNNING        7
+
+
+/*
+ * internal error codes
+ *
+ * Only used internally to support just_checking.
+ */
+
+#define INIT_D_ERROR_JUST_RUNNING       150
+#define INIT_D_ERROR_JUST_NOT_RUNNING   151
+
+
+/*
+ * status codes
+ */
+
+#define INIT_D_STATUS_OK                0
+#define INIT_D_STATUS_DEAD_PID          1
+#define INIT_D_STATUS_DEAD_LOCK         2
+#define INIT_D_STATUS_NOT_RUNNING       3
+#define INIT_D_STATUS_UNKNOWN           4
+
+
+/*
+ * /lib/lsb/init-functions
+ */
+int start_daemon(int force, int nice_level, char *pidfile, char *pathname, char *args);
+int killproc(char *pidfile, char *pathname, int my_signal);
+int checkpid(char *pid);
+int pidofproc(char *pidfile, char *pathname, char **pids);
+void log_success_msg(char *message);
+void log_failure_msg(char *message);
+void log_warning_msg(char *message);
+
+
+init_d_info_t *parse_init_info(char *info_text, char *name);
+char *get_init_info(char *pathname);
+llist_t *get_scripts(void);
+llist_t *sort_scripts(llist_t *unsorted);
+
+
+#define REDIR    1
+#define QUIET    2
+#define ERRONLY  4
+#define FORK     8
+#define NOFORK   16
+#define DAEMON   32
+
+extern struct stat path_stat;
+
+typedef struct nodes_s
+{
+        const char *name;
+        mode_t mode;
+        int major;
+        int minor;
+        int count;
+} nodes_t;
+
+
+char *argv_cat(int argc, char **argv);
+char *big_chomp(char *s);
+int checkpid(char *pid);
+char *doit(int mode, char *command, ...);
+
+#ifndef CONFIG_IFUPDOWN
+#define RUNLEVEL_LIST           1
+#endif
+#ifdef RUNLEVEL_LIST
+// From ifupdown, so it should probably be in libbb.
+llist_t *llist_add_to_end(llist_t *list_head, char *data);
+#else
+extern llist_t *llist_add_to_end(llist_t *list_head, char *data);
+#endif
+
+llist_t *llist_delete(llist_t **unsorted, llist_t *previous, llist_t *current);
+void make_disk(char *token, const nodes_t *nodes);
+void make_ram_disk(int size, int number, char *place, int TMPFS);
+void quick_mount(char *type, char *device, char *path, char *data, ...);
+char *quick_read(char *filename);
+void quick_write(const char *filename, const char *data, ...);
+
+
+#endif
diff --git a/urunlevel/runlevel/local_fs.c b/urunlevel/runlevel/local_fs.c
new file mode 100644
index 0000000..17b45f6
--- /dev/null
+++ b/urunlevel/runlevel/local_fs.c
@@ -0,0 +1,199 @@
+/*
+ * Mini $local_fs boot implementation for busybox.
+ *
+ * Copyright (C) 2004 by David Seikel won_fang@yahoo.com.au
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307 USA
+ *
+ */
+
+#include <string.h>
+#include <unistd.h>
+
+#include "busybox.h"
+#include "lib_init_d.h"
+
+
+const static nodes_t nodes[] =
+{
+        {"hda",            S_IFBLK,   3,  0, 0},
+        {"hdb",            S_IFBLK,   3, 64, 0},
+        {"hdc",            S_IFBLK,  22,  0, 0},
+        {"hdd",            S_IFBLK,  22, 64, 0},
+        {"ram",            S_IFBLK,   1,  0, 9},
+        {"fd",             S_IFBLK,   2,  0, 1},
+        {"loop",           S_IFBLK,   7,  0,63},
+        {"cloop",          S_IFBLK, 240,  0, 7},
+        {"vcs",            S_IFBLK,   7,  0, 9},
+        {"vcsa",           S_IFBLK,   7,  0, 9},
+        {0, 0, 0, 0, 0}
+};
+
+
+static int start(struct init_d_handle_s *, int);
+static int status(struct init_d_handle_s *, int);
+static int stop(struct init_d_handle_s *, int);
+
+
+static init_d_handle_t my_commands =
+{
+    &start,
+    &stop,
+    NULL,
+    NULL,
+    &no_reload,
+    NULL,
+    &status,
+    NULL,
+    "local_fs",
+    NULL,
+    NULL,
+    NULL,
+    INIT_D_BEGIN \
+    INIT_D_PROV "$local_fs" \
+    INIT_D_DSTART "1 2 3 4 5" \
+    INIT_D_DSTOP "0 6" \
+    INIT_D_SDESC "Mount all local file systems." \
+    INIT_D_DESC "Mount all local file systems." \
+    INIT_D_CONT "Including any left over partitions not otherwise mounted." \
+    INIT_D_END
+};
+
+
+static const char *i386_sys_types[] = 
+{
+//      " 0Empty",
+//      " 1fat",
+//      " 4fat",
+//      " 6fat",
+//      " bvfat",
+        " cvfat",
+//      " evfat",
+//      " fvfat",
+        "80minix",
+        "81minix",
+        "82swap",
+        "83ext2",
+        "85Linux extended",
+        0
+};
+
+
+int local_fs_main(int argc, char **argv)
+{
+    return do_init_from_main(argc, argv, &my_commands);
+}
+
+
+static int start(struct init_d_handle_s *init_d, int just_checking)
+{
+    int i;
+    char *CMDLINE = 0;
+    char *ROOT = 0;
+    char *CDEV = 0;
+    char *FDEV = 0;
+    char *token;
+    char *strtok_temp;
+
+sleep(5); // delay it for testing purposes
+// Should fsck all non root partitions first.
+    doit(0, "/bin/mount -a");
+    bb_xasprintf(&CMDLINE, "%s", doit(REDIR, "cat /proc/cmdline"));
+    for (token = strtok_r(CMDLINE, " \t\n\r", &strtok_temp); token != NULL; token = strtok_r(NULL, " \t\n\r", &strtok_temp))
+    {
+        if (strncmp(token, "ROOT=", 5) == 0)
+            ROOT = &token[5];
+    }
+
+    bb_xasprintf(&CDEV, "%s", doit(REDIR, "dmesg | grep D-ROM | grep hd | cut -d: -f1 | sort | uniq"));
+
+    bb_xasprintf(&FDEV, "%s %s", doit(REDIR, "dmesg | grep -v LDM | grep \"^ [sh]d[a-f]\" | cut -d':' -f2 | sort | uniq"), (CDEV != 0) ? CDEV : "");
+    token = strtok_r(FDEV, " \r\n", &strtok_temp);
+    for (i = 0; token != NULL; i++)
+    {
+        if (strlen(token) > 2)
+            make_disk(token, nodes);
+        token = strtok_r(NULL, " \r\n", &strtok_temp);
+    }
+
+    bb_xasprintf(&FDEV, "%s", doit(REDIR, "fdisk -l | grep \"^/dev/\" | cut -b6-10,52-55"));
+    token = strtok_r(FDEV, "\r\n", &strtok_temp);
+    for (i = 0; token != NULL; i++)
+    {
+        int j;
+        int found = 0;
+        char *type = &token[6];
+        token[4] = '\0';
+        for (j = 0; i386_sys_types[j] != 0; j++)
+        {
+            if (strncmp(i386_sys_types[j], type, 2) == 0)
+            {
+                char *DEV = 0;
+                char *MOUNT = 0;
+                char *TYPE = 0;
+
+                bb_xasprintf(&DEV, "/dev/%s", token);
+                bb_xasprintf(&MOUNT, "/media/%s", token);
+                bb_xasprintf(&TYPE, "%s", &i386_sys_types[j][2]);
+                found = 1;
+                if (strncmp(&i386_sys_types[j][2], "swap", 4) == 0)
+                {
+                    doit(QUIET, "mkswap %s", DEV);
+                    doit(QUIET, "swapon %s", DEV);
+                }
+                else
+                {
+// Should not mount it if it is already mounted.
+                    if ((ROOT == 0) || strcmp(ROOT, DEV) != 0)  /* Don't try to remount ROOT, */
+                    {
+                        make_disk(token, nodes);
+                        quick_mount(TYPE, DEV, MOUNT, "-o ro");
+//                      quick_mount("auto", DEV, MOUNT, "-o ro");
+                    }
+                }
+
+                break;
+            }
+        }
+//      if (found == 0)
+//          bb_printf(" %s - unknown\n", token);
+        
+        token = strtok_r(NULL, "\r\n", &strtok_temp);
+    }
+
+    free(FDEV);
+    free(CDEV);
+    free(ROOT);
+    free(CMDLINE);
+
+    return INIT_D_OK;
+}
+
+
+static int status(struct init_d_handle_s *init_d, int quiet)
+{
+    return print_status(init_d, quiet, INIT_D_STATUS_OK);
+}
+
+
+static int stop(struct init_d_handle_s *init_d, int just_checking)
+{
+// Should only umount things we mounted in the first place.
+// Same for swap
+    doit(0, "/sbin/swapoff -a");
+    doit(0, "/bin/umount -a -r");
+    return INIT_D_OK;
+}
diff --git a/urunlevel/runlevel/log_failure_msg.c b/urunlevel/runlevel/log_failure_msg.c
new file mode 100644
index 0000000..47f43f7
--- /dev/null
+++ b/urunlevel/runlevel/log_failure_msg.c
@@ -0,0 +1,54 @@
+/*
+ * Mini log_failure_msg implementation for busybox.
+ *
+ * Copyright (C) 2005 by David Seikel won_fang@yahoo.com.au
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307 USA
+ *
+ */
+
+#include <unistd.h>
+
+#include "busybox.h"
+#include "lib_init_d.h"
+
+
+void log_failure_msg(char *message)
+{
+    bb_perror_msg("Failure - %s\n", message);
+}
+
+
+/*
+log_failure_msg "message"
+    This requests the distribution to print a failure
+    message.  The message should be relatively short; no
+    more than 60 characters is highly desirable.
+*/
+
+int log_failure_msg_main(int argc, char **argv)
+{
+    char *message = argv_cat(argc, argv);
+
+    if (message != NULL)
+    {
+        log_failure_msg(message);
+
+        free(message);
+        return EXIT_SUCCESS;
+    }
+    return EXIT_FAILURE;
+}
diff --git a/urunlevel/runlevel/log_success_msg.c b/urunlevel/runlevel/log_success_msg.c
new file mode 100644
index 0000000..caa1eed
--- /dev/null
+++ b/urunlevel/runlevel/log_success_msg.c
@@ -0,0 +1,54 @@
+/*
+ * Mini log_success_msg implementation for busybox.
+ *
+ * Copyright (C) 2005 by David Seikel won_fang@yahoo.com.au
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307 USA
+ *
+ */
+
+#include <unistd.h>
+
+#include "busybox.h"
+#include "lib_init_d.h"
+
+
+void log_success_msg(char *message)
+{
+    bb_printf("Success - %s\n", message);
+}
+
+
+/*
+log_success_msg "message"
+    This requests the distribution to print a success
+    message.  The message should be relatively short; no
+    more than 60 characters is highly desirable.
+*/
+
+int log_success_msg_main(int argc, char **argv)
+{
+    char *message = argv_cat(argc, argv);
+
+    if (message != NULL)
+    {
+        log_success_msg(message);
+
+        free(message);
+        return EXIT_SUCCESS;
+    }
+    return EXIT_FAILURE;
+}
diff --git a/urunlevel/runlevel/log_warning_msg.c b/urunlevel/runlevel/log_warning_msg.c
new file mode 100644
index 0000000..81ef204
--- /dev/null
+++ b/urunlevel/runlevel/log_warning_msg.c
@@ -0,0 +1,54 @@
+/*
+ * Mini log_warning_msg implementation for busybox.
+ *
+ * Copyright (C) 2005 by David Seikel won_fang@yahoo.com.au
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307 USA
+ *
+ */
+
+#include <unistd.h>
+
+#include "busybox.h"
+#include "lib_init_d.h"
+
+
+void log_warning_msg(char *message)
+{
+    bb_perror_msg("Warning - %s\n", message);
+}
+
+
+/*
+log_warning_msg "message"
+    This requests the distribution to print a warning
+    message.  The message should be relatively short; no
+    more than 60 characters is highly desirable.
+*/
+
+int log_warning_msg_main(int argc, char **argv)
+{
+    char *message = argv_cat(argc, argv);
+
+    if (message != NULL)
+    {
+        log_warning_msg(message);
+
+        free(message);
+        return EXIT_SUCCESS;
+    }
+    return EXIT_FAILURE;
+}
diff --git a/urunlevel/runlevel/network.c b/urunlevel/runlevel/network.c
new file mode 100644
index 0000000..dff5fc1
--- /dev/null
+++ b/urunlevel/runlevel/network.c
@@ -0,0 +1,146 @@
+/*
+ * Mini network boot implementation for busybox.
+ *
+ * Copyright (C) 2004 by David Seikel won_fang@yahoo.com.au
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307 USA
+ *
+ */
+
+#include <string.h>
+#include <unistd.h>
+
+#include "busybox.h"
+#include "lib_init_d.h"
+
+
+static int start(struct init_d_handle_s *, int);
+static int status(struct init_d_handle_s *init_d, int);
+static int stop(struct init_d_handle_s *, int);
+
+
+static init_d_handle_t my_commands =
+{
+    &start,
+    &stop,
+    NULL,
+    NULL,
+    NULL,
+    NULL,
+    &status,
+    NULL,
+    "network",
+    NULL,
+    NULL,
+    NULL,
+    INIT_D_BEGIN \
+    INIT_D_PROV "$network" \
+    INIT_D_RSTART "$syslog" \
+    INIT_D_DSTART "3 4 5" \
+    INIT_D_DSTOP "0 1 2 6" \
+    INIT_D_SDESC "Basic network setup" \
+    INIT_D_DESC "Configures all your network interfaces," \
+    INIT_D_CONT "brings them all up and sets up routing." \
+    INIT_D_CONT "Also configures things like port forwarding," \
+    INIT_D_CONT "hostnames, etc." \
+    INIT_D_END
+};
+
+
+int network_main(int argc, char **argv)
+{
+    return do_init_from_main(argc, argv, &my_commands);
+}
+
+
+static int start(struct init_d_handle_s *init_d, int just_checking)
+{
+    int i;
+    int my_status = (init_d->status)(init_d, 0);
+    char *IPADDR = 0;
+
+    if (my_status == INIT_D_STATUS_NOT_RUNNING)
+    {
+        my_status = INIT_D_ERROR_NOT_RUNNING;
+//      if (stat("/proc/net/pnp", &path_stat) == 0)
+//          copy_file("/proc/net/pnp", "/etc/resolv.conf", FILEUTILS_FORCE | FILEUTILS_PRESERVE_STATUS);
+
+        fflush(stdout);
+        doit(QUIET, "ifup -af");
+        for (i = 20; stat("/var/lib/network/ipaddr", &path_stat) != 0; i--)
+        {
+            bb_printf(".");
+            fflush(stdout);
+            sleep(2);
+            if (i <= 0)
+            {
+                bb_printf(" timeout.");
+                break;
+            }
+        }
+
+        if (stat("/var/lib/network/ipaddr", &path_stat) == 0)
+            IPADDR = quick_read("/var/lib/network/ipaddr");
+
+        if ((IPADDR != 0) && (IPADDR[0] != '\0'))
+        {
+            if (stat("/proc/sys/net/ipv4/tcp_syn_retries", &path_stat) == 0)
+                quick_write("/proc/sys/net/ipv4/tcp_syn_retries", "7");
+            if (stat("/var/lib/my_linux/config/ipfwd", &path_stat) == 0)
+            {
+                bb_printf("Enabling IP forwarding\n");
+                quick_write("/proc/sys/net/ipv4/ip_forward", "1");
+            }
+            if (stat("/var/lib/my_linux/config/noping", &path_stat) == 0)
+                quick_write("/proc/sys/net/ipv4/icmp_echo_ignore_all", "1");
+            my_status = INIT_D_OK;
+        }
+        else
+            my_status = INIT_D_ERROR_GENERIC;
+
+        free(IPADDR);
+    }
+    else
+        my_status = INIT_D_OK;
+
+    return my_status;
+}
+
+
+static int status(struct init_d_handle_s *init_d, int quiet)
+{
+    int my_status = INIT_D_STATUS_NOT_RUNNING;
+    char *ip = NULL;
+
+    bb_xasprintf(&ip, "%s", doit(REDIR, "ip -o addr | grep lo: | cut -d\" \" -f3 | cut -d\",\" -f2"));
+    if ((ip != NULL) && (strncmp("UP", ip, 2) == 0))
+        my_status = INIT_D_STATUS_OK;
+
+    return print_status(init_d, quiet, my_status);
+}
+
+
+static int stop(struct init_d_handle_s *init_d, int just_checking)
+{
+    int my_status = default_stop(init_d, 1);
+
+    if (my_status == INIT_D_ERROR_JUST_RUNNING)
+    {
+        doit(QUIET, "ifdown -af");
+        my_status = INIT_D_OK;
+    }
+    return my_status;
+}
diff --git a/urunlevel/runlevel/pidofproc.c b/urunlevel/runlevel/pidofproc.c
new file mode 100644
index 0000000..6d03ae8
--- /dev/null
+++ b/urunlevel/runlevel/pidofproc.c
@@ -0,0 +1,192 @@
+/*
+ * Mini pidofproc implementation for busybox.
+ *
+ * Copyright (C) 2005 by David Seikel won_fang@yahoo.com.au
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307 USA
+ *
+ */
+
+#include <getopt.h>
+#include <string.h>
+#include <unistd.h>
+
+#include "busybox.h"
+#include "lib_init_d.h"
+
+
+int checkpid(char *pid)
+{
+    int found = 0;
+    char proc[132];
+
+    sprintf(proc, "/proc/%s", pid);
+    if (stat(proc, &path_stat) == 0)
+    {
+        char *state = NULL;
+
+        sprintf(proc, "/proc/%s/stat", pid);
+        state = quick_read(proc);
+        if (state != NULL)
+        {
+            /* Read and interpret the third space seperated field (State - DRSW = OK - ZX = DEAD_PID - T = STOPPED) */
+            if (state[0] != '\0')
+            {
+                while (*state != ' ')  state++;
+                while (*state == ' ')  state++;
+                while (*state != ' ')  state++
+// Should compare the name while scanning this.
+                    ;
+                while (*state == ' ')  state++;
+                switch (*state)
+                {
+                    case 'D' :
+                    case 'R' :
+                    case 'S' :
+                    case 'W' :
+                    case 'T' :  /* Until proven otherwise, I'm assuming this means OK. */
+                        found = 1;
+                }
+            }
+        }
+        else  /* Paranoid fallbacks. */
+        {
+            sprintf(proc, "/proc/%s/exe", pid);
+            if (stat(proc, &path_stat) == 0)
+            {
+// Should check that it is a link to our executable.
+                found = 1;
+            }
+            else
+            {
+                sprintf(proc, "/proc/%s/cmdline", pid);
+                if (stat(proc, &path_stat) == 0)
+                {
+// Should compare the name.
+                    found = 1;
+                }
+            }
+        }
+        
+    }
+
+    return found;
+}
+
+
+int pidofproc(char *pidfile, char *pathname, char **pids)
+{
+    int status = INIT_D_STATUS_UNKNOWN;
+    char *our_pidfile = pidfile;
+    char *our_pids = NULL;
+
+    if (our_pidfile == NULL)
+        bb_xasprintf(&our_pidfile, "/var/run/%s.pid", bb_get_last_path_component(pathname));
+
+    our_pids = quick_read(our_pidfile);
+
+    if (our_pids != NULL)
+    {
+        int i;
+        char *pid;
+        char *strtok_temp;
+
+        status = INIT_D_STATUS_DEAD_PID;
+        if (pids != NULL)
+        {
+            (*pids) = (char *) xmalloc(sizeof (char) * strlen(our_pids) + 1);
+            (*pids)[0] = '\0';
+        }
+
+        pid = strtok_r(our_pids, " \n\r", &strtok_temp);
+        for (i = 0; pid != NULL; i++)
+        {
+            if (checkpid(pid))
+            {
+                if (pids != NULL)
+                {
+                    strcat(*pids, pid);
+                    strcat(*pids, " ");
+                }
+                status = INIT_D_STATUS_OK;
+            }
+
+            pid = strtok_r(NULL, " \n\r", &strtok_temp);
+        }
+
+        free(our_pids);
+    }
+    else
+        status = INIT_D_STATUS_NOT_RUNNING;
+
+    if (pidfile == NULL)
+        free(our_pidfile);
+
+    return status;
+}
+
+
+/*
+pidofproc [-p pidfile] pathname
+    This function returns one or more pid(s) for a particular
+    daemon using the algorithm given above. Only pids of running processes
+    should be returned.
+
+    Multiple pid(s) shall be separated by a single space in the pidfile
+    and in the output of pidofproc.
+
+    Compliant applications may use the basename instead of the pathname.
+    pidofproc should return the LSB defined exit status
+    codes for "status". It shall return 0 if the program is
+    running and not 0 otherwise.
+*/
+
+static const struct option long_options[] = 
+{
+        { "pidfile",    1,      NULL,   'p' },
+        { 0,            0,      0,      0 }
+};
+
+int pidofproc_main(int argc, char **argv)
+{
+    int result = EXIT_FAILURE;
+    char *pidfile = NULL;
+    char *pids = NULL;
+    int opt;
+
+    while ((opt = getopt_long (argc, argv, "p:", long_options, NULL)) > 0)
+    {
+        switch (opt) 
+        {
+            case 'p':
+                pidfile = optarg;
+                break;
+
+            default:
+                bb_show_usage();
+        }
+    }
+
+    /* We require exactly one argument: the path name */
+    if (optind != (argc - 1)) 
+        bb_show_usage();
+
+    result = pidofproc(pidfile, argv[optind], &pids);
+    if (pids != NULL)
+        bb_printf("%s\n", pids);
+
+    return result;
+}
diff --git a/urunlevel/runlevel/rc.c b/urunlevel/runlevel/rc.c
new file mode 100644
index 0000000..9efe84d
--- /dev/null
+++ b/urunlevel/runlevel/rc.c
@@ -0,0 +1,1271 @@
+/*
+ * Mini rc implementation for busybox.
+ *
+ * Copyright (C) 2005 by David Seikel won_fang@yahoo.com.au
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307 USA
+ *
+ */
+
+#include <sys/types.h>
+#include <ctype.h>
+#include <dirent.h>
+#include <errno.h>
+#include <signal.h>
+#include <stdio.h>
+#include <string.h>
+#include <unistd.h>
+
+#include "busybox.h"
+#include "lib_init_d.h"
+
+
+const static char *commands[] =
+{
+    "start",
+    "stop",
+    "restart",
+    "try-restart",
+    "reload",
+    "force-reload",
+    "status",
+    "info",
+    NULL
+};
+
+
+const static char *INFOS[] =
+{
+    INIT_D_BEGIN,
+    INIT_D_PROV,
+    INIT_D_RSTART,
+    INIT_D_RSTOP,
+    INIT_D_SSTART,
+    INIT_D_SSTOP,
+    INIT_D_DSTART,
+    INIT_D_DSTOP,
+    INIT_D_SDESC,
+    INIT_D_DESC,
+    INIT_D_COMMENT,
+    INIT_D_CONT,
+    INIT_D_CONT2,
+    INIT_D_END,
+    NULL
+};
+
+
+int default_start(struct init_d_handle_s *init_d, int just_checking)
+{
+    int status = (init_d->status)(init_d, 0);
+
+    switch (status)
+    {
+        case INIT_D_STATUS_OK :
+        {
+            status = INIT_D_OK;
+            break;
+        }
+
+        case INIT_D_STATUS_DEAD_PID :
+        {
+            log_warning_msg("Stale pid file exists!");
+            status = INIT_D_ERROR_GENERIC;  // LSB is not clear on what to return, but this is an error condition.
+            break;
+        }
+
+        case INIT_D_STATUS_DEAD_LOCK :
+        {
+            log_warning_msg("Stale lock file exists!");
+            status = INIT_D_ERROR_GENERIC;  // LSB is not clear on what to return, but this is an error condition.
+            break;
+        }
+
+        case INIT_D_STATUS_NOT_RUNNING :
+        {
+            struct stat script_stat;
+
+            if (stat(init_d->pathname, &script_stat) == 0)
+            {
+                if (just_checking)
+                    status = INIT_D_ERROR_JUST_NOT_RUNNING;
+                else
+                    status = start_daemon(0, 0, init_d->pidfile, init_d->pathname, init_d->args);
+            }
+            else
+                status = INIT_D_ERROR_NOT_INSTALLED;
+            break;
+        }
+        
+        default :
+        {
+            status = INIT_D_ERROR_GENERIC;
+            break;
+        }
+    }
+
+    return status;
+}
+
+
+int default_stop(struct init_d_handle_s *init_d, int just_checking)
+{
+    int status = (init_d->status)(init_d, 0);
+
+    switch (status)
+    {
+        case INIT_D_STATUS_OK :
+        {
+            if (just_checking)
+                status = INIT_D_ERROR_JUST_RUNNING;
+            else
+                status = killproc(init_d->pidfile, init_d->pathname, 0);
+            break;
+        }
+
+        case INIT_D_STATUS_DEAD_PID :
+        {
+            log_warning_msg("Stale pid file exists!");
+            status = INIT_D_ERROR_GENERIC;  // LSB is not clear on what to return, but this is an error condition.
+            break;
+        }
+
+        case INIT_D_STATUS_DEAD_LOCK :
+        {
+            log_warning_msg("Stale lock file exists!");
+            status = INIT_D_ERROR_GENERIC;  // LSB is not clear on what to return, but this is an error condition.
+            break;
+        }
+
+        case INIT_D_STATUS_NOT_RUNNING :
+        {
+            status = INIT_D_OK;
+            break;
+        }
+        
+        default :
+        {
+            status = INIT_D_ERROR_GENERIC;
+            break;
+        }
+    }
+
+    return status;
+}
+
+
+int default_restart(struct init_d_handle_s *init_d, int just_checking)
+{
+    int status = (init_d->status)(init_d, 0);
+
+    switch (status)
+    {
+        case INIT_D_STATUS_OK :
+        {
+            status = (init_d->stop)(init_d, just_checking);
+            if ((status == INIT_D_OK) || (status == INIT_D_ERROR_NOT_RUNNING))
+                status = INIT_D_STATUS_NOT_RUNNING;
+            else
+                status = INIT_D_STATUS_UNKNOWN;
+            break;
+        }
+        
+        case INIT_D_STATUS_DEAD_PID :
+        {
+            log_warning_msg("Stale pid file exists!");
+            break;
+        }
+
+        case INIT_D_STATUS_DEAD_LOCK :
+        {
+            log_warning_msg("Stale lock file exists!");
+            break;
+        }
+    }
+    if (status == INIT_D_STATUS_NOT_RUNNING)
+        status = (init_d->start)(init_d, just_checking);
+    else
+        status = INIT_D_ERROR_GENERIC;
+
+    return status;
+}
+
+
+int default_try_restart(struct init_d_handle_s *init_d, int just_checking)
+{
+    int status = (init_d->status)(init_d, 0);
+
+    switch (status)
+    {
+        case INIT_D_STATUS_OK :
+        {
+            status = (init_d->stop)(init_d, just_checking);
+            if (status == INIT_D_OK)
+                status =  (init_d->start)(init_d, just_checking);
+            else if (status == INIT_D_ERROR_NOT_RUNNING)  /* I think this is what LSB 8.2.61 means.  LSB 8.2.59 means that this should never happen though. */
+                status = INIT_D_OK;
+            break;
+        }
+        
+        case INIT_D_STATUS_NOT_RUNNING :  /* I think this is what LSB 8.2.61 means. */
+        {  /* If try-restart was meant to start a stopped service, then it would be no different from restart.
+            * LSB 8.2.42-44 may have some bearing on this, but the english is broken, rendering it unintelligable.
+            * OTH, try-restart is optional, so a broken implentation is no problem B-).
+            * OTGH, our force-reload uses this as it's fallback position.
+            */
+            status = INIT_D_OK;
+            break;
+        }
+
+        default :
+        {
+            status = INIT_D_ERROR_GENERIC;
+        }
+    }
+
+    return status;
+}
+
+
+int default_reload(struct init_d_handle_s *init_d, int just_checking)
+{
+    return INIT_D_ERROR_NOT_IMPLEMENTED;
+}
+
+
+int sighup_reload(struct init_d_handle_s *init_d, int just_checking)
+{
+    int status = (init_d->status)(init_d, 0);
+
+    switch (status)
+    {
+        case INIT_D_STATUS_OK :
+        {
+            if (just_checking)
+                status = INIT_D_ERROR_JUST_RUNNING;
+            else
+                status = killproc(init_d->pidfile, init_d->pathname, SIGHUP);
+            break;
+        }
+
+        case INIT_D_STATUS_NOT_RUNNING :
+        {
+            status = INIT_D_ERROR_NOT_RUNNING;
+            break;
+        }
+
+        default :
+        {
+            status = INIT_D_ERROR_GENERIC;
+            break;
+        }
+    }
+
+    return status;
+}
+
+
+int default_force_reload(struct init_d_handle_s *init_d, int just_checking)
+{
+    int status = (init_d->reload)(init_d, just_checking);
+
+    if (status ==  INIT_D_ERROR_NOT_IMPLEMENTED)
+        status = (init_d->try_restart)(init_d, just_checking);
+
+    return status;
+}
+
+
+int print_status(struct init_d_handle_s *init_d, int quiet, int status)
+{
+    if (quiet)
+        switch (status)
+        {
+            case INIT_D_STATUS_OK :
+            {
+                bb_printf("%s is running.\n", init_d->basename);
+                break;
+            }
+
+            case INIT_D_STATUS_DEAD_PID :
+            {
+                bb_printf("%s is not running, but there is a stale %s.\n", init_d->basename, init_d->pidfile);
+                break;
+            }
+
+            case INIT_D_STATUS_DEAD_LOCK :
+            {
+                bb_printf("%s is not running, but there is a stale lock file.\n", init_d->basename);
+                break;
+            }
+
+            case INIT_D_STATUS_NOT_RUNNING :
+            {
+                bb_printf("%s is not running.\n", init_d->basename);
+                break;
+            }
+        
+            default :
+            {
+                bb_printf("The status of %s is not known.\n", init_d->basename);
+                break;
+            }
+        }
+
+    return status;
+}
+
+
+int default_status(struct init_d_handle_s *init_d, int quiet)
+{
+    return print_status(init_d, quiet, pidofproc(init_d->pidfile, init_d->pathname, NULL));
+}
+
+
+int default_show_info(struct init_d_handle_s *init_d, int just_checking)
+{
+    bb_printf("%s", init_d->info);
+    return INIT_D_OK;
+}
+
+
+int no_stop(struct init_d_handle_s *init_d, int just_checking)
+{
+    return INIT_D_ERROR_NOT_IMPLEMENTED;
+}
+
+
+int no_reload(struct init_d_handle_s *init_d, int just_checking)
+{
+    return INIT_D_ERROR_NOT_IMPLEMENTED;
+}
+
+
+int no_status(struct init_d_handle_s *init_d, int quiet)
+{
+    return INIT_D_ERROR_NOT_IMPLEMENTED;
+}
+
+
+int do_init_from_main(int argc, char **argv, struct init_d_handle_s *init_d)
+{
+    return do_init(init_d, (argc > 1) ? argv[1] : NULL);
+}
+
+
+int do_init(struct init_d_handle_s *init_d, const char *command)
+{
+    int i;
+    int status = INIT_D_ERROR_NOT_IMPLEMENTED;
+    char *original_pidfile = init_d->pidfile;
+
+    if (init_d->start           == NULL)        init_d->start           = &default_start;
+    if (init_d->stop            == NULL)        init_d->stop            = &default_stop;
+    if (init_d->restart         == NULL)        init_d->restart         = &default_restart;
+    if (init_d->try_restart     == NULL)        init_d->try_restart     = &default_try_restart;
+    if (init_d->reload          == NULL)        init_d->reload          = &default_reload;
+    if (init_d->force_reload    == NULL)        init_d->force_reload    = &default_force_reload;
+    if (init_d->status          == NULL)        init_d->status          = &default_status;
+    if (init_d->show_info       == NULL)        init_d->show_info       = &default_show_info;
+    if (init_d->basename        == NULL)        init_d->basename        = bb_get_last_path_component(init_d->pathname);
+    if (init_d->pathname        == NULL)        init_d->pathname        = init_d->basename;
+    if (init_d->args            == NULL)        init_d->args            = "";
+    if (init_d->pidfile         == NULL)        bb_xasprintf(&(init_d->pidfile), "/var/run/%s.pid", init_d->basename);
+    if (init_d->info            == NULL)        init_d->info            = "";
+
+    if (command == NULL)
+        command = commands[2];  // Default to restart.
+
+    for (i = 0; commands[i] != 0; i++)
+    {
+        if (strcmp(commands[i], command ) == 0)
+        {
+            switch (i)
+            {
+                case 0 :  status = (init_d->start)(init_d, 0);          break;
+                case 1 :  status = (init_d->stop)(init_d, 0);           break;
+                case 2 :  status = (init_d->restart)(init_d, 0);        break;
+                case 3 :  status = (init_d->try_restart)(init_d, 0);    break;
+                case 4 :  status = (init_d->reload)(init_d, 0);         break;
+                case 5 :  status = (init_d->force_reload)(init_d, 0);   break;
+                case 6 :  status = (init_d->status)(init_d, 1);         break;
+                case 7 :  status = (init_d->show_info)(init_d, 0);      break;
+            }
+            break;
+        }
+    }
+
+    if (original_pidfile == NULL)
+        free(init_d->pidfile);
+    return status;
+}
+
+
+static int init_script(char *script, char *command)
+{
+    int status = INIT_D_ERROR_NOT_IMPLEMENTED;
+
+    bb_printf("%c%s %s ... ", toupper(command[0]), &command[1], script);
+    fflush(stdout);
+    doit(0, "/etc/init.d/%s %s", script, command);
+    status = errno;
+    if (strcmp("status", command) != 0)
+    {
+        bb_printf("\t\t");
+        switch (status)
+        {
+            case INIT_D_OK :                    bb_printf("OK");        break;
+            case INIT_D_ERROR_NOT_IMPLEMENTED : bb_printf("not implemented");   break;
+            case INIT_D_ERROR_NOT_INSTALLED :   bb_printf("not installed");     break;
+            case INIT_D_ERROR_NOT_CONFIGURED :  bb_printf("not configured");    break;
+            case INIT_D_ERROR_NOT_RUNNING :     bb_printf("not running");       break;
+            case INIT_D_ERROR_GENERIC :         bb_printf("failed");    break;
+            case INIT_D_ERROR_ARGS :            bb_printf("invalid arguments"); break;
+            case INIT_D_ERROR_SECURITY :        bb_printf("security failure");  break;
+            default :                           bb_printf("Failed!");   break;
+        }
+        bb_printf("\n");
+    }
+    return status;
+}
+
+
+init_d_info_t *parse_init_info(char *info_text, char *name)
+{
+    init_d_info_t *info = NULL;
+
+    // if init info found
+    if ((info_text != NULL) && (strncmp(info_text, INIT_D_BEGIN, strlen(INIT_D_BEGIN) - 1) == 0))
+    {
+        if (strncmp(info_text, INIT_D_BEGIN, strlen(INIT_D_BEGIN) - 1) == 0)
+        {
+            int lastfound = -1;
+            char *strtok_line;
+            char *line;
+            char *linecopy;
+
+            info = (init_d_info_t *) xcalloc(1, sizeof(init_d_info_t));
+            bb_xasprintf(&info->path, "%s", name);
+
+//bb_printf("%s is an init script -%s", name, info_text);
+//bb_printf("%s is an init script\n", name);
+            // parse info into structure
+            for (line = strtok_r(info_text, "\n\r", &strtok_line); line != NULL; line = strtok_r(NULL, "\n\r", &strtok_line))
+            {
+                int count = 0;
+                int found = -1;
+                char *strtok_token;
+                char *token;
+
+                bb_xasprintf(&linecopy, "%s", line);
+                for (token = strtok_r(line, " \t", &strtok_token); token != NULL; token = strtok_r(NULL, " \t", &strtok_token))
+                {
+                    switch (count++)
+                    {
+                        case 0 :  break;  /*  Ignore the "#". */
+
+                        case 1 :
+                        {
+                            int j;
+                            for (j = 1; INFOS[j] != NULL; j++)
+                            {
+//bb_printf("%s = %s %s\n", linecopy, &(INFOS[j][1]), token);
+                                if (strncmp(&(INFOS[j][1]), linecopy, strlen(&(INFOS[j][1])) - 1) == 0)
+                                {
+                                    found = j - 1;
+                                    break;
+                                }
+                            }
+                            break;
+                        }
+
+                        default :
+                        {
+                            int multi = 1;
+                            int string = 1;
+                            void **kludge = (void **)info;
+
+                            switch (found)
+                            {
+                                case 5 : /* INIT_D_DSTART */  string = 0;  break;
+                                case 6 : /* INIT_D_DSTOP */   string = 0;  break;
+                                case 7 : /* INIT_D_SDESC */   multi = 0;   break;
+                                case 8 : /* INIT_D_DESC */    multi = 0;   break;
+                                case 10 : /* INIT_D_CONT */  
+                                case 11 : /* INIT_D_CONT2 */  multi = 0;  found = lastfound;  break;
+                                case 12 : /* INIT_D_END */    found = -1;  break;
+                            }
+
+                            if (found != -1)
+                            {
+                                void *temp = kludge[found];
+
+                                if (multi == 1)
+                                {
+                                    int size = info->sizes[found];
+
+                                    info->sizes[found]++;
+// not LSB, but SuSE does it
+if (token[0] == '$')
+    token = &token[1];
+// not LSB, but SuSE does it
+if (strncmp(token, "boot.", 5) == 0)
+    token = &token[5];
+                                    if (temp != NULL)
+                                        kludge[found] = xrealloc(kludge[found], sizeof (char **) * (size + 1));
+                                    else
+                                        kludge[found] = xcalloc(1, sizeof (char **));
+                                    if (string == 1)
+                                        bb_xasprintf(&((char **) kludge[found])[size], "%s", token);
+                                    else
+                                    {
+// not LSB, but SuSE does it
+if (token[0] == 'B')
+{
+    token[0] = '5';
+    kludge[found] = xrealloc(kludge[found], sizeof (char **) * (10 + 1));
+    ((int *) kludge[found])[0] = 1;
+    ((int *) kludge[found])[1] = 2;
+    ((int *) kludge[found])[2] = 3;
+    ((int *) kludge[found])[3] = 4;
+    size = 4;
+    info->sizes[found] = 5;
+}
+// not LSB, but SuSE does it
+if (token[0] == 'S')
+    token[0] = '1';
+                                        ((int *) kludge[found])[size] = atoi(token);
+                                    }
+                                    temp = NULL;
+                                }
+                                else
+                                {
+                                    if (string == 1)
+                                    {
+                                        if (kludge[found] == NULL)
+                                            bb_xasprintf((char **) &kludge[found], "%s", token);
+                                        else
+                                            bb_xasprintf((char **) &kludge[found], "%s %s", (char *) kludge[found], token);
+                                    }
+                                    else
+                                    {
+// Should never happen.                     int value = atoi(token);
+                                        temp = NULL;
+                                    }
+                                }
+
+                                if (temp != NULL)
+                                    free(temp);
+                            }
+                            lastfound = found;
+
+                            break;
+                        }
+                    }
+                }
+            }
+
+
+#if 0
+{
+    int k;
+
+    bb_printf("SCRIPT %s path %s\n", name, info->path);
+//    bb_printf("%s sizes ", name);
+//    for(k = 0; k < 10; k++)
+//      bb_printf("%d ", info->sizes[k]);
+//    bb_printf("\n");
+    if (info->provides != NULL)
+    {
+        bb_printf("%s provides ", name);
+        for(k = 0; k < info->sizes[0]; k++)
+            bb_printf("%s ", info->provides[k]);
+        bb_printf("\n");
+    }
+    if (info->reqstart != NULL)
+    {
+        bb_printf("%s reqstart ", name);
+        for(k = 0; k < info->sizes[1]; k++)
+            bb_printf("%s ", info->reqstart[k]);
+        bb_printf("\n");
+    }
+    if (info->reqstop != NULL)
+    {
+        bb_printf("%s reqstop ", name);
+        for(k = 0; k < info->sizes[2]; k++)
+            bb_printf("%s ", info->reqstop[k]);
+        bb_printf("\n");
+    }
+
+    if (info->shouldstart != NULL)
+    {
+        bb_printf("%s shouldstart ", name);
+        for(k = 0; k < info->sizes[3]; k++)
+            bb_printf("%s ", info->shouldstart[k]);
+        bb_printf("\n");
+    }
+    if (info->shouldstop != NULL)
+    {
+        bb_printf("%s shouldstop ", name);
+        for(k = 0; k < info->sizes[4]; k++)
+            bb_printf("%s ", info->shouldstop[k]);
+        bb_printf("\n");
+    }
+
+    if (info->defstart != NULL)
+    {
+        bb_printf("%s defstart ", name);
+        for(k = 0; k < info->sizes[5]; k++)
+            bb_printf("%d ", info->defstart[k]);
+        bb_printf("\n");
+    }
+    if (info->defstop != NULL)
+    {
+        bb_printf("%s defstop ", name);
+        for(k = 0; k < info->sizes[6]; k++)
+            bb_printf("%d ", info->defstop[k]);
+        bb_printf("\n");
+    }
+    if (info->shortdesc != NULL)
+        bb_printf("%s shortdes %s\n", name, info->shortdesc);
+    if (info->desc != NULL)
+        bb_printf("%s descript %s\n", name, info->desc);
+    bb_printf("\n");
+}
+#endif
+
+        // if database of runlevels per script includes overrides
+            // change info structure accordingly
+        }
+    }
+
+    return info;
+}
+
+
+char *get_init_info(char *pathname)
+{
+    struct stat script_stat;
+    char *info_text = NULL;
+    char *base_name = bb_get_last_path_component(pathname);
+
+
+//bb_printf("CHECKING %s, ", pathname);
+    // ignore rc, rcS, directories, non executables
+    if ((strcmp(base_name, "rc") != 0) && 
+        (strcmp(base_name, "rcS") != 0) &&
+        (stat(pathname, &script_stat) == 0))
+    {
+        if ((!S_ISDIR(script_stat.st_mode)) && 
+        S_ISREG(script_stat.st_mode) && 
+        ((script_stat.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)) != 0 ))
+        {
+//bb_printf("maybe init script, ");
+            // script info
+            if ((info_text == NULL) || (strncmp(info_text, INIT_D_BEGIN, strlen(INIT_D_BEGIN) - 1) != 0))
+                bb_xasprintf(&info_text, "%s", doit(REDIR | QUIET, "%s info", pathname));
+//bb_printf("INFO = %s\n", info_text);
+
+            // if not proper response
+            if ((info_text == NULL) || (strncmp(info_text, INIT_D_BEGIN, strlen(INIT_D_BEGIN) - 1) != 0))
+            {
+                int count = 1;
+                int found = -1;
+                char *line;
+                FILE *contents;
+
+//bb_printf("search for INFO, ");
+                // search script for init info
+                info_text = (char *) xmalloc(sizeof (char) * 256 * 64);
+                info_text[0] = '\n';
+                info_text[1] = '\0';
+                contents = fopen(pathname, "r");
+                if (contents != NULL)
+                {
+                    do
+                    {
+                        line = fgets(&info_text[count], 255, contents);
+                        if (line != NULL)
+                        {
+                            line--;
+                            if ((found == -1) && (strncmp(line, INIT_D_BEGIN, strlen(INIT_D_BEGIN) - 1) == 0))
+                                found = 0;
+
+                            if (found != -1)
+                            {
+
+                                if (strncmp(line, INIT_D_CUSTOM, strlen(INIT_D_CUSTOM)) != 0)
+                                {
+                                    if (strncmp(line, INIT_D_END, strlen(INIT_D_END) - 1) == 0)
+                                    {
+//bb_printf("INFO found, ");
+                                        line = NULL;
+                                        found = 64 + 1;
+                                    }
+                                    else
+                                    {
+                                        int cont = 0;
+
+                                        if (strncmp(line, INIT_D_CONT, strlen(INIT_D_CONT)) == 0)
+                                            cont = 1;
+                                        if (strncmp(line, INIT_D_CONT2, strlen(INIT_D_CONT2)) == 0)
+                                            cont = 1;
+                                        if (cont == 1)
+                                        {
+//bb_printf("\n\n\nCONT found%s\n\n\n, ", line);
+                                            info_text[count - 1] = ' ';
+                                            info_text[count] = ' ';
+                                        }
+
+                                        found++;
+                                        count += strlen(line) - 1;
+                                        if (info_text[count - 1] != '\n')
+                                        {
+                                            info_text[count++] = '\n';
+// Should seek until the next \n,
+                                        }
+                                    }
+                                    info_text[count] = '\0';
+                                }
+                            }
+                        }
+                    } while ((line != NULL) && (found < 64));
+
+                    fclose(contents);
+                }
+            }
+        }
+    }
+//bb_printf("\n");
+
+    return info_text;
+}
+
+
+llist_t *get_scripts(void)
+{
+    llist_t *result = NULL;
+    DIR *initd = opendir("/etc/init.d");
+
+        if (initd != NULL)
+        {
+            struct dirent *script;
+
+            // foreach ls /etc/init.d
+            while ((script = readdir(initd)) != NULL)
+            {
+                char *info_text = NULL;
+                char *pathname = NULL;
+                init_d_info_t *info = NULL;
+
+                bb_xasprintf(&pathname, "/etc/init.d/%s", script->d_name);
+                info_text = get_init_info(pathname);
+                info = parse_init_info(info_text, script->d_name);
+                if (info)
+                    result = llist_add_to(result, (char *) info);
+
+                free(info_text);
+            }
+            closedir(initd);
+        }
+
+    return result;
+}
+
+
+llist_t *sort_scripts(llist_t *unsorted)
+{
+// Should do something with info->shouldstart's
+    int count_moves = 0;
+    // all scripts start in unsorted list
+    llist_t *sorted = NULL;
+    llist_t *current = unsorted;
+    llist_t *previous = NULL;
+
+    // pull out those with no deps and create a sorted list for each
+    while (current) 
+    {
+        init_d_info_t *info = (init_d_info_t *) current->data;
+
+        if (info->reqstart == NULL)
+        {
+            llist_t *new_list = NULL;
+            new_list = llist_add_to_end(new_list, (char *) info);
+            sorted = llist_add_to_end(sorted, (char *) new_list);
+            current = llist_delete(&unsorted, previous, current);
+        }
+        else
+        {
+            previous = current;
+            current = current->link;
+        }
+    }
+
+    do
+    {
+        count_moves = 0;
+        current = unsorted;
+        previous = NULL;
+        // foreach in unsorted list
+        while (current) 
+        {
+            int moved = 0;
+            init_d_info_t *info = (init_d_info_t *) current->data;
+
+            if (info->reqstart != NULL)
+            {
+                int k;
+                llist_t *current_sort = sorted;
+                short done[info->sizes[1]];
+
+                // foreach sorted list
+                while (current_sort) 
+                {
+                    llist_t *current_list = (llist_t *) current_sort->data;
+
+                    // if ALL deps are in sorted list move script to end of sorted list
+                    for(k = 0; k < info->sizes[1]; k++)
+                        done[k] = 0;
+                    while (current_list) 
+                    {
+                        init_d_info_t *this_info = (init_d_info_t *) current_list->data;
+
+                        for(k = 0; k < info->sizes[1]; k++)
+                        {
+                            int i;
+                            char *needs = info->reqstart[k];
+
+                            if (done[k] == 0)
+                            {
+//bb_printf("%s NEEDS %s - ", info->path, needs);
+                                for(i = 0; i < this_info->sizes[0]; i++)
+                                {
+//bb_printf("%s ", this_info->provides[i]);
+                                    if (strcmp(this_info->provides[i], needs) == 0)
+                                    {
+                                        done[k] = 1;
+                                        break;
+                                    }
+                                }
+//bb_printf("\n");
+                            }
+                        }
+                        current_list = current_list->link;
+                    }
+
+                    moved = 1;
+                    for(k = 0; k < info->sizes[1]; k++)
+                    {
+                        if (done[k] == 0)
+                        {
+                            moved = 0;
+                            break;
+                        }
+                    }
+                    if (moved == 1)
+                    {
+                        llist_t *list = (llist_t *) current_sort->data;
+                        llist_add_to_end(list, (char *) info);
+                        current = llist_delete(&unsorted, previous, current);
+                        moved = 1;
+                        count_moves++;
+                        current_sort = NULL;
+                    }
+                    else
+                        current_sort = current_sort->link;
+                }
+            }
+
+            if (moved == 0)
+            {
+                previous = current;
+                current = current->link;
+            }
+        }
+    } while (count_moves != 0);
+    // until no more moves happen
+
+
+    do
+    {
+        count_moves = 0;
+        current = unsorted;
+        previous = NULL;
+        // foreach in unsorted list
+        while (current) 
+        {
+            int moved = 1;
+            init_d_info_t *info = (init_d_info_t *) current->data;
+            short done[info->sizes[1]];
+
+            if (info->reqstart != NULL)
+            {
+                int k;
+                llist_t *current_sortof = sorted;
+
+                // if ALL deps are in sorted lists
+                for(k = 0; k < info->sizes[1]; k++)
+                    done[k] = 0;
+                while ((moved == 1) && (current_sortof != NULL))
+                {
+                    llist_t *current_listof = (llist_t *) current_sortof->data;
+
+                    while (current_listof)
+                    {
+                        init_d_info_t *this_info = (init_d_info_t *) current_listof->data;
+
+                        for(k = 0; k < info->sizes[1]; k++)
+                        {
+                            int i;
+                            char *needs = info->reqstart[k];
+
+                            if (done[k] == 0)
+                            {
+//bb_printf("%s NEEDS %s - ", info->path, needs);
+                                for(i = 0; i < this_info->sizes[0]; i++)
+                                {
+//bb_printf("%s ", this_info->provides[i]);
+                                    if (strcmp(this_info->provides[i], needs) == 0)
+                                    {
+                                        done[k] = 1;
+                                        break;
+                                    }
+                                }
+//bb_printf("\n");
+                            }
+                        }
+                        current_listof = current_listof->link;
+                    }
+                    current_sortof = current_sortof->link;
+                }
+
+                moved = 1;
+                for(k = 0; k < info->sizes[1]; k++)
+                {
+                    if (done[k] == 0)
+                    {
+                        moved = 0;
+                        break;
+                    }
+                }
+
+                if (moved == 1)
+                {
+                    // create a merged list for script
+                    llist_t *current_sort = sorted;
+                    llist_t *new_list = NULL;
+                    new_list = llist_add_to_end(new_list, (char *) info);
+                    count_moves++;
+
+                    // foreach sorted | merged list
+                    while (current_sort)
+                    {
+                        int found = 0;
+                        llist_t *current_list = (llist_t *) current_sort->data;
+
+                        // if A dep is in s|m add s|m to end of new merged list & continue with next s|m
+                        while (current_list)
+                        {
+                            init_d_info_t *this_info = (init_d_info_t *) current_list->data;
+
+                            for(k = 0; k < info->sizes[1]; k++)
+                            {
+                                int i;
+                                char *needs = info->reqstart[k];
+
+                                for(i = 0; i < this_info->sizes[0]; i++)
+                                {
+                                    if (strcmp(this_info->provides[i], needs) == 0)
+                                    {
+                                        found = 1;
+                                        break;
+                                    }
+                                }
+                                if (found == 1)
+                                    break;
+                            }
+                            if (found == 1)
+                            {
+                                init_d_info_t *new_info = (init_d_info_t *) xcalloc(1, sizeof(init_d_info_t));
+                                new_info->start = current_sort;
+                                new_list = llist_add_to_end(new_list, (char *) new_info);
+                                current_list = NULL;
+                            }
+                            else
+                                current_list = current_list->link;
+                        }
+
+                        current_sort = current_sort->link;
+                    }
+
+                    sorted = llist_add_to_end(sorted, (char *) new_list);
+                    current = llist_delete(&unsorted, previous, current);
+                }
+            }
+
+            if (moved == 0)
+            {
+                previous = current;
+                current = current->link;
+            }
+        }
+    } while (count_moves != 0);
+    // until no more creates happen
+
+
+    // unsorted list now contains unsatisfied and circular dependencies
+    // complain if not empty.
+    if (unsorted != NULL)
+    {
+        bb_printf("\nWARNING, the following init scripts have unresolved or circular dependencies -\n");
+        current = unsorted;
+
+        while (current) 
+        {
+            init_d_info_t *info = (init_d_info_t *) current->data;
+
+            bb_printf("%s\n", info->path);
+            current = current->link;
+#if 0
+{
+    int k;
+
+    bb_printf("SCRIPT %s - ", info->path);
+    if (info->defstart != NULL)
+    {
+        bb_printf("\t\t ");
+        for(k = 0; k < info->sizes[5]; k++)
+            bb_printf("%d ", info->defstart[k]);
+//      bb_printf("\n");
+    }
+    if (info->provides != NULL)
+    {
+        bb_printf("\t\t ");
+        for(k = 0; k < info->sizes[0]; k++)
+            bb_printf("%s ", info->provides[k]);
+//      bb_printf("\n");
+    }
+    if (info->reqstart != NULL)
+    {
+        bb_printf("\n\t ");
+        for(k = 0; k < info->sizes[1]; k++)
+            bb_printf("%s ", info->reqstart[k]);
+//      bb_printf("\n");
+    }
+    bb_printf("\n");
+}
+#endif
+        }
+        bb_printf("\n");
+    }
+
+    return sorted;
+}
+
+
+static void call_scripts(llist_t *sorted, char *command, int oldlevel, int level)
+{
+    // call init_script(script, command) for each script in each list in created order
+    llist_t *current_sort = sorted;
+
+    while (current_sort) 
+    {
+        llist_t *current_list = (llist_t *) current_sort->data;
+
+//bb_printf("\nLIST\n");
+        while (current_list) 
+        {
+            init_d_info_t *info = (init_d_info_t *) current_list->data;
+
+            if (info->path != NULL)
+            {
+                if (info->defstart != NULL)
+                {
+                    int k;
+                    int found = 0;
+
+                    // if info->DefaultStart includes level
+                    for(k = 0; k < info->sizes[5]; k++)
+                    {
+                        if (info->defstart[k] == level)
+                        {
+                            found = 1;
+                            break;
+                        }
+                    }
+                    // if info->DefaultStart does not include previous level
+                    for(k = 0; k < info->sizes[5]; k++)
+                    {
+                        if (info->defstart[k] == oldlevel)
+                        {
+                            found = 0;
+                            break;
+                        }
+                    }
+                    // add info structure to list
+                    if (found == 1)
+                        init_script(info->path, command);
+                }
+
+#if 0
+{
+    int k;
+
+    bb_printf("SCRIPT %s - ", info->path);
+    if (info->defstart != NULL)
+    {
+        bb_printf("\t\t ");
+        for(k = 0; k < info->sizes[5]; k++)
+            bb_printf("%d ", info->defstart[k]);
+//      bb_printf("\n");
+    }
+    if (info->provides != NULL)
+    {
+        bb_printf("\t\t ");
+        for(k = 0; k < info->sizes[0]; k++)
+            bb_printf("%s ", info->provides[k]);
+//      bb_printf("\n");
+    }
+    if (info->reqstart != NULL)
+    {
+        bb_printf("\n\t ");
+        for(k = 0; k < info->sizes[1]; k++)
+            bb_printf("%s ", info->reqstart[k]);
+//      bb_printf("\n");
+    }
+    bb_printf("\n");
+}
+#endif
+            }
+            current_list = current_list->link;
+        }
+        current_sort = current_sort->link;
+    }
+}
+
+
+int run_level(char *level)
+{
+    int oldlevel = 0;
+    int newlevel = atoi(level);
+    char *temp;
+    llist_t *sorted = NULL;
+    llist_t *reversed = NULL;
+    llist_t *current_sort = NULL;
+
+    bb_printf("\n\nSwitching to run level %d", newlevel);
+
+    // get previous run level
+    temp = quick_read("/var/lib/misc/runlevel");
+    if (temp != NULL)
+    {
+        oldlevel = atoi(temp);
+        if (oldlevel < 0)
+            oldlevel = 1;
+        if (oldlevel > 6)
+            oldlevel = 5;
+        bb_printf(" from run level %d", oldlevel);
+        free(temp);
+    }
+    bb_printf(".\n\n");
+
+    // get scripts and sort dependencies, careful with circular dependencies
+    sorted = sort_scripts(get_scripts());
+
+    // reverse
+    current_sort = sorted;
+    while (current_sort) 
+    {
+        llist_t *current_list = (llist_t *) current_sort->data;
+        llist_t *new_list = NULL;
+
+        while (current_list) 
+        {
+            new_list = llist_add_to(new_list, current_list->data);
+            current_list = current_list->link;
+        }
+        reversed = llist_add_to(reversed, (char *) new_list);
+        current_sort = current_sort->link;
+    }
+
+    // call "stop" for each script
+    bb_printf("\n");
+    call_scripts(reversed, "stop", newlevel, oldlevel);
+
+    // call "start" for each script
+    bb_printf("\n");
+    call_scripts(sorted, "start", oldlevel, newlevel);
+// free all infos
+
+    // set previous run level to new run level
+    quick_write("/var/lib/misc/runlevel", "%d", newlevel);
+
+
+// Later, optionally call them in parallel when possible.
+
+
+// Later, add a database of runlevels per script and allow editing them -
+//   rc network --runlevels 3 4 5
+//   cat /etc/runlevels.conf
+//      runlevel="3"
+//      runlevel3="multi user with network."
+//      runlevel4="multi user with network and twin."
+//      runlevel5="multi user with network and X."
+//      local_fs="1 2 3 4 5"
+//      network="3 4 5"
+//      script1="2 3 5"
+//      script1="3 5"
+//   rc network --runlevels
+//      3 4 5
+//   rc network --runlevels -v
+//      The "network" service will be active during these run levels :
+//        3 - multi user with network.
+//        4 - multi user with network and twin.
+//        5 - multi user with network and X.
+
+    return EXIT_SUCCESS;
+}
+
+
+/*
+ * rc
+ * rc 1
+ * rc network start
+ * rc network --runlevels
+ * rc network --runlevels -v
+ * rc network --runlevels 3 4 5
+ */
+
+int rc_main(int argc, char **argv)
+{
+    switch (argc)
+    {
+        case  0 :
+        case  1 :
+        {
+            return run_level(quick_read("/etc/runlevel"));
+        }
+        case  2 :  return run_level(argv[1]);
+        case  3 :
+        {
+// Should take care of dependencies for argv[1] script.
+            return init_script(argv[1], argv[2]);
+        }
+        default :
+        {
+            return INIT_D_ERROR_NOT_IMPLEMENTED;
+        }
+    }
+}
diff --git a/urunlevel/runlevel/remote_fs.c b/urunlevel/runlevel/remote_fs.c
new file mode 100644
index 0000000..6da11f5
--- /dev/null
+++ b/urunlevel/runlevel/remote_fs.c
@@ -0,0 +1,83 @@
+/*
+ * Mini remote_fs boot implementation for busybox.
+ *
+ * Copyright (C) 2005 by David Seikel won_fang@yahoo.com.au
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307 USA
+ *
+ */
+
+#include <unistd.h>
+
+#include "busybox.h"
+#include "lib_init_d.h"
+
+
+static int start(struct init_d_handle_s *, int);
+static int status(struct init_d_handle_s *, int);
+static int stop(struct init_d_handle_s *, int);
+
+
+static init_d_handle_t my_commands =
+{
+    &start,
+    &stop,
+    NULL,
+    NULL,
+    &no_reload,
+    NULL,
+    &status,
+    NULL,
+    "remote_fs",
+    NULL,
+    NULL,
+    NULL,
+    INIT_D_BEGIN \
+    INIT_D_PROV "$remote_fs" \
+    INIT_D_RSTART "$network" \
+    INIT_D_SSTART "nfs smbfs codafs" \
+    INIT_D_DSTART "3 4 5" \
+    INIT_D_DSTOP "0 1 2 6" \
+    INIT_D_SDESC "Mount all remote file systems." \
+    INIT_D_DESC "Mount all remote file systems.  Actually, this is just a" \
+    INIT_D_CONT "dummy that depends on all the init scripts that could" \
+    INIT_D_CONT "possibly mount remote file systems." \
+    INIT_D_END
+};
+
+
+int remote_fs_main(int argc, char **argv)
+{
+    return do_init_from_main(argc, argv, &my_commands);
+}
+
+
+static int start(struct init_d_handle_s *init_d, int just_checking)
+{
+    return INIT_D_OK;
+}
+
+
+static int status(struct init_d_handle_s *init_d, int quiet)
+{
+    return print_status(init_d, quiet, INIT_D_STATUS_OK);
+}
+
+
+static int stop(struct init_d_handle_s *init_d, int just_checking)
+{
+    return INIT_D_OK;
+}
diff --git a/urunlevel/runlevel/remove_initd.c b/urunlevel/runlevel/remove_initd.c
new file mode 100644
index 0000000..1224b03
--- /dev/null
+++ b/urunlevel/runlevel/remove_initd.c
@@ -0,0 +1,38 @@
+/*
+ * Mini remove_initd implementation for busybox.
+ *
+ * Copyright (C) 2005 by David Seikel won_fang@yahoo.com.au
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307 USA
+ *
+ */
+
+#include <unistd.h>
+
+#include "busybox.h"
+#include "lib_init_d.h"
+
+
+int remove_initd_main(int argc, char **argv)
+{
+    llist_t *sorted = NULL;
+    llist_t *unsorted = get_scripts();
+
+// Should remove this script from unsorted.
+    sorted = sort_scripts(unsorted);
+// Should return 1 if there are unsatisfied dependencies if this is removed.
+    return EXIT_SUCCESS;
+}
diff --git a/urunlevel/runlevel/skeleton b/urunlevel/runlevel/skeleton
new file mode 100755
index 0000000..cbd8b0e
--- /dev/null
+++ b/urunlevel/runlevel/skeleton
@@ -0,0 +1,282 @@
+#! /bin/sh
+# Copyright (c) 1995-2004 SUSE Linux AG, Nuernberg, Germany.
+# All rights reserved.
+#
+# Author: Kurt Garloff
+# Please send feedback to http://www.suse.de/feedback/
+#
+# /etc/init.d/FOO
+#   and its symbolic link
+# /(usr/)sbin/rcFOO
+#
+#    This program is free software; you can redistribute it and/or modify 
+#    it under the terms of the GNU General Public License as published by 
+#    the Free Software Foundation; either version 2 of the License, or 
+#    (at your option) any later version. 
+# 
+#    This program is distributed in the hope that it will be useful, 
+#    but WITHOUT ANY WARRANTY; without even the implied warranty of 
+#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
+#    GNU General Public License for more details. 
+# 
+#    You should have received a copy of the GNU General Public License 
+#    along with this program; if not, write to the Free Software 
+#    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+#
+# Template system startup script for some example service/daemon FOO
+#
+# LSB compatible service control script; see http://www.linuxbase.org/spec/
+# 
+# Note: This template uses functions rc_XXX defined in /etc/rc.status on
+# UnitedLinux (UL) based Linux distributions. If you want to base your 
+# script on this template and ensure that it works on non UL based LSB 
+# compliant Linux distributions, you either have to provide the rc.status
+# functions from UL or change the script to work without them.
+#
+### BEGIN INIT INFO
+# Provides:          FOO
+# Required-Start:    $syslog $remote_fs
+# Should-Start: $time ypbind sendmail
+# Required-Stop:     $syslog $remote_fs
+# Should-Stop: $time ypbind sendmail
+# Default-Start:     3 5
+# Default-Stop:      0 1 2 6
+# Short-Description: FOO XYZ daemon providing ZYX
+# Description:       Start FOO to allow XY and provide YZ
+#       continued on second line by '#<TAB>'
+#       should contain enough info for the runlevel editor
+#       to give admin some idea what this service does and
+#       what it's needed for ...
+#       (The Short-Description should already be a good hint.)
+### END INIT INFO
+# 
+# Any extensions to the keywords given above should be preceeded by 
+# X-VendorTag- (X-UnitedLinux- X-SuSE- for us) according to LSB.
+# 
+# Notes on Required-Start/Should-Start:
+# * There are two different issues that are solved by Required-Start
+#    and Should-Start
+# (a) Hard dependencies: This is used by the runlevel editor to determine
+#     which services absolutely need to be started to make the start of
+#     this service make sense. Example: nfsserver should have
+#     Required-Start: $portmap
+#     Also, required services are started before the dependent ones.
+#     The runlevel editor will warn about such missing hard dependencies
+#     and suggest enabling. During system startup, you may expect an error,
+#     if the dependency is not fulfilled.
+# (b) Specifying the init script ordering, not real (hard) dependencies.
+#     This is needed by insserv to determine which service should be
+#     started first (and at a later stage what services can be started
+#     in parallel). The tag Should-Start: is used for this.
+#     It tells, that if a service is available, it should be started
+#     before. If not, never mind.
+# * When specifying hard dependencies or ordering requirements, you can 
+#   use names of services (contents of their Provides: section)
+#   or pseudo names starting with a $. The following ones are available
+#   according to LSB (1.1):
+#       $local_fs               all local file systems are mounted
+#                               (most services should need this!)
+#       $remote_fs              all remote file systems are mounted
+#                               (note that /usr may be remote, so
+#                                many services should Require this!)
+#       $syslog                 system logging facility up
+#       $network                low level networking (eth card, ...)
+#       $named                  hostname resolution available
+#       $netdaemons             all network daemons are running
+#   The $netdaemons pseudo service has been removed in LSB 1.2.
+#   For now, we still offer it for backward compatibility.
+#   These are new (LSB 1.2):
+#       $time                   the system time has been set correctly  
+#       $portmap                SunRPC portmapping service available
+#   UnitedLinux extensions:
+#       $ALL                    indicates that a script should be inserted
+#                               at the end
+# * The services specified in the stop tags 
+#   (Required-Stop/Should-Stop)
+#   specify which services need to be still running when this service
+#   is shut down. Often the entries there are just copies or a subset 
+#   from the respective start tag.
+# * Should-Start/Stop are now part of LSB as of 2.0,
+#   formerly SUSE/Unitedlinux used X-UnitedLinux-Should-Start/-Stop.
+#   insserv does support both variants.
+# * X-UnitedLinux-Default-Enabled: yes/no is used at installation time
+#   (%fillup_and_insserv macro in %post of many RPMs) to specify whether
+#   a startup script should default to be enabled after installation.
+#   It's not used by insserv.
+#
+# Note on runlevels:
+# 0 - halt/poweroff                     6 - reboot
+# 1 - single user                       2 - multiuser without network exported
+# 3 - multiuser w/ network (text mode)  5 - multiuser w/ network and X11 (xdm)
+# 
+# Note on script names:
+# http://www.linuxbase.org/spec/refspecs/LSB_1.3.0/gLSB/gLSB/scrptnames.html
+# A registry has been set up to manage the init script namespace.
+# http://www.lanana.org/
+# Please use the names already registered or register one or use a
+# vendor prefix.
+
+
+# Check for missing binaries (stale symlinks should not happen)
+# Note: Special treatment of stop for LSB conformance
+FOO_BIN=/usr/sbin/FOO
+test -x $FOO_BIN || { echo "$FOO_BIN not installed"; 
+        if [ "$1" = "stop" ]; then exit 0;
+        else exit 5; fi; }
+
+# Check for existence of needed config file and read it
+FOO_CONFIG=/etc/sysconfig/FOO
+test -r $FOO_CONFIG || { echo "$FOO_CONFIG not existing";
+        if [ "$1" = "stop" ]; then exit 0;
+        else exit 6; fi; }
+
+# Read config   
+. $FOO_CONFIG
+
+# Source LSB init functions
+# providing start_daemon, killproc, pidofproc, 
+# log_success_msg, log_failure_msg and log_warning_msg.
+# This is currently not used by UnitedLinux based distributions and
+# not needed for init scripts for UnitedLinux only. If it is used,
+# the functions from rc.status should not be sourced or used.
+#. /lib/lsb/init-functions
+
+# Shell functions sourced from /etc/rc.status:
+#      rc_check         check and set local and overall rc status
+#      rc_status        check and set local and overall rc status
+#      rc_status -v     be verbose in local rc status and clear it afterwards
+#      rc_status -v -r  ditto and clear both the local and overall rc status
+#      rc_status -s     display "skipped" and exit with status 3
+#      rc_status -u     display "unused" and exit with status 3
+#      rc_failed        set local and overall rc status to failed
+#      rc_failed <num>  set local and overall rc status to <num>
+#      rc_reset         clear both the local and overall rc status
+#      rc_exit          exit appropriate to overall rc status
+#      rc_active        checks whether a service is activated by symlinks
+. /etc/rc.status
+
+# Reset status of this service
+rc_reset
+
+# Return values acc. to LSB for all commands but status:
+# 0       - success
+# 1       - generic or unspecified error
+# 2       - invalid or excess argument(s)
+# 3       - unimplemented feature (e.g. "reload")
+# 4       - user had insufficient privileges
+# 5       - program is not installed
+# 6       - program is not configured
+# 7       - program is not running
+# 8--199  - reserved (8--99 LSB, 100--149 distrib, 150--199 appl)
+# 
+# Note that starting an already running service, stopping
+# or restarting a not-running service as well as the restart
+# with force-reload (in case signaling is not supported) are
+# considered a success.
+
+case "$1" in
+    start)
+        echo -n "Starting FOO "
+        ## Start daemon with startproc(8). If this fails
+        ## the return value is set appropriately by startproc.
+        startproc $FOO_BIN
+
+        # Remember status and be verbose
+        rc_status -v
+        ;;
+    stop)
+        echo -n "Shutting down FOO "
+        ## Stop daemon with killproc(8) and if this fails
+        ## killproc sets the return value according to LSB.
+
+        killproc -TERM $FOO_BIN
+
+        # Remember status and be verbose
+        rc_status -v
+        ;;
+    try-restart|condrestart)
+        ## Do a restart only if the service was active before.
+        ## Note: try-restart is now part of LSB (as of 1.9).
+        ## RH has a similar command named condrestart.
+        if test "$1" = "condrestart"; then
+                echo "${attn} Use try-restart ${done}(LSB)${attn} rather than condrestart ${warn}(RH)${norm}"
+        fi
+        $0 status
+        if test $? = 0; then
+                $0 restart
+        else
+                rc_reset        # Not running is not a failure.
+        fi
+        # Remember status and be quiet
+        rc_status
+        ;;
+    restart)
+        ## Stop the service and regardless of whether it was
+        ## running or not, start it again.
+        $0 stop
+        $0 start
+
+        # Remember status and be quiet
+        rc_status
+        ;;
+    force-reload)
+        ## Signal the daemon to reload its config. Most daemons
+        ## do this on signal 1 (SIGHUP).
+        ## If it does not support it, restart.
+
+        echo -n "Reload service FOO "
+        ## if it supports it:
+        killproc -HUP $FOO_BIN
+        #touch /var/run/FOO.pid
+        rc_status -v
+
+        ## Otherwise:
+        #$0 try-restart
+        #rc_status
+        ;;
+    reload)
+        ## Like force-reload, but if daemon does not support
+        ## signaling, do nothing (!)
+
+        # If it supports signaling:
+        echo -n "Reload service FOO "
+        killproc -HUP $FOO_BIN
+        #touch /var/run/FOO.pid
+        rc_status -v
+        
+        ## Otherwise if it does not support reload:
+        #rc_failed 3
+        #rc_status -v
+        ;;
+    status)
+        echo -n "Checking for service FOO "
+        ## Check status with checkproc(8), if process is running
+        ## checkproc will return with exit status 0.
+
+        # Return value is slightly different for the status command:
+        # 0 - service up and running
+        # 1 - service dead, but /var/run/  pid  file exists
+        # 2 - service dead, but /var/lock/ lock file exists
+        # 3 - service not running (unused)
+        # 4 - service status unknown :-(
+        # 5--199 reserved (5--99 LSB, 100--149 distro, 150--199 appl.)
+        
+        # NOTE: checkproc returns LSB compliant status values.
+        checkproc $FOO_BIN
+        # NOTE: rc_status knows that we called this init script with
+        # "status" option and adapts its messages accordingly.
+        rc_status -v
+        ;;
+    probe)
+        ## Optional: Probe for the necessity of a reload, print out the
+        ## argument to this init script which is required for a reload.
+        ## Note: probe is not (yet) part of LSB (as of 1.9)
+
+        test /etc/FOO/FOO.conf -nt /var/run/FOO.pid && echo reload
+        ;;
+    *)
+        echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload|probe}"
+        exit 1
+        ;;
+esac
+rc_exit
diff --git a/urunlevel/runlevel/start_daemon.c b/urunlevel/runlevel/start_daemon.c
new file mode 100644
index 0000000..ba922fa
--- /dev/null
+++ b/urunlevel/runlevel/start_daemon.c
@@ -0,0 +1,153 @@
+/*
+ * Mini start_daemon implementation for busybox.
+ *
+ * Copyright (C) 2005 by David Seikel won_fang@yahoo.com.au
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307 USA
+ *
+ */
+
+#include <errno.h>
+#include <getopt.h>
+#include <string.h>
+#include <sys/time.h>
+#include <sys/resource.h>
+#include <unistd.h>
+
+#include "busybox.h"
+#include "lib_init_d.h"
+
+
+int start_daemon(int force, int nice_level, char *pidfile, char *pathname, char *args)
+{
+    int status = 0;
+    status = pidofproc(pidfile, pathname, NULL);
+
+    if ((status != INIT_D_STATUS_OK) || (force))
+    {
+        char *pids = NULL;
+        char *strtok_temp;
+
+        doit(DAEMON, "start-stop-daemon -Sbmp %s -x %s -- %s", pidfile, pathname, args);
+sleep(1);
+        status = pidofproc(pidfile, pathname, &pids);
+        if ((status == INIT_D_STATUS_OK) && (nice_level))
+        {
+            int i;
+            char *pid;
+
+            pid = strtok_r(pids, " ", &strtok_temp);
+            for (i = 0; pid != NULL; i++)
+            {
+                int ps = atoi(pid);
+                int oldp;
+
+                errno = 0;
+                oldp = getpriority(PRIO_PROCESS, ps);
+                if (errno == 0)
+                    setpriority(PRIO_PROCESS, ps, oldp + nice_level);
+                pid = strtok_r(NULL, " ", &strtok_temp);
+            }
+        }
+    }
+
+    return status;
+}
+
+
+/*
+start_daemon [-f] [-n nicelevel] [-p pidfile] pathname [args]
+    This runs the specified program as a daemon.
+    start_daemon shall check if the program is already running
+    using the algorithm given above. If so, it shall not
+    start another copy of the daemon unless the -f
+    option is given. The -n option specifies a nice
+    level. See nice(1).
+
+    start_daemon should return the LSB defined exit status codes. It
+    shall return 0 if the program has been successfully started or
+    is running and not 0 otherwise.
+*/
+
+
+int start_daemon_main(int argc, char **argv)
+{
+    int result = EXIT_FAILURE;
+    int force = 0;
+    int nice_level = 0;
+    char *pidfile = NULL;
+    char *pathname = NULL;
+    char *args = NULL;
+    int i;
+
+    for (i = 1; i < argc; i++)
+    {
+        char *p = argv[i];
+        
+        if (*p == '-')
+        {
+            while (*(++p))
+            {
+                switch (*p)
+                {
+                    case 'f' :
+                        force = 1;
+                        break;
+
+                    case 'n' :
+                        if ((++i) < argc)
+                            nice_level = atoi(argv[i]);
+                        else
+                            bb_show_usage();
+                        break;
+
+                    case 'p' :
+                        if ((++i) < argc)
+                            pidfile = argv[i];
+                        else
+                            bb_show_usage();
+                        break;
+
+                    default:
+                        bb_show_usage();
+                }
+            }
+        }
+        else if (pathname == NULL)
+        {
+            pathname = p;
+            break;
+        }
+        else
+            bb_show_usage();
+    }
+
+    if (pathname == NULL)
+        bb_show_usage();
+
+    if (i < argc)
+        args = argv_cat(argc - i, &argv[i]);
+
+//bb_printf("ARGS - |%s|%s|%d|%d|%s\n", pidfile, pathname, force, nice_level, args);
+    result = start_daemon(force, nice_level, pidfile, pathname, args);
+
+    if (args != NULL)
+        free(args);
+
+    return result;
+}
+
+
diff --git a/urunlevel/runlevel/udhcpc_script.c b/urunlevel/runlevel/udhcpc_script.c
new file mode 100644
index 0000000..5d5f592
--- /dev/null
+++ b/urunlevel/runlevel/udhcpc_script.c
@@ -0,0 +1,191 @@
+/*
+ * Mini udhcpc_script implementation for busybox.
+ *
+ * Copyright (C) 2004 by David Seikel won_fang@yahoo.com.au
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307 USA
+ *
+ */
+
+#include <errno.h>
+#include <string.h>
+#include <unistd.h>
+
+#include "busybox.h"
+#include "lib_init_d.h"
+
+
+static void printit(char *name, char *description, char *value)
+{
+    if (value != NULL)
+        bb_printf("%s=%s\t\t- %s\n", name, value, description);
+}
+
+int udhcpc_script_main(int argc, char **argv)
+{
+    argv += optind;
+
+#if 0
+    printit("action", "What action the script should perform", *argv);
+    printit("HOME", "The set $HOME env or '/'", getenv("HOME"));
+    printit("PATH", "the set $PATH env or '/bin:/usr/bin:/sbin:/usr/sbin'", getenv("PATH"));
+    printit("interface", "The interface this was obtained on", getenv("interface"));
+    printit("ip", "The obtained IP", getenv("ip"));
+    printit("mask", "The number of bits in the netmask (ie: 24)", getenv("mask"));
+    printit("siaddr", "The bootp next server option", getenv("siaddr"));
+    printit("sname", "The bootp server name option", getenv("sname"));
+    printit("boot_file", "The bootp boot file option", getenv("boot_file"));
+    printit("subnet", "The assigend subnet mask", getenv("subnet"));
+    printit("timezone", "Offset in seconds from UTC", getenv("timezone"));
+    printit("router", "A list of routers", getenv("router"));
+    printit("timesvr", "A list of time servers", getenv("timesvr"));
+    printit("namesvr", "A list of IEN 116 name servers", getenv("namesvr"));
+    printit("dns", "A list of DNS server", getenv("dns"));
+    printit("logsvr", "A list of MIT-LCS UDP log servers", getenv("logsvr"));
+    printit("cookiesvr", "A list of RFC 865 cookie servers", getenv("cookiesvr"));
+    printit("lprsvr", "A list of LPR servers", getenv("lprsvr"));
+    printit("hostname", "The assigned hostname", getenv("hostname"));
+    printit("bootsize", "The length in 512 octect blocks of the bootfile", getenv("bootsize"));
+    printit("domain", "The domain name of the network", getenv("domain"));
+    printit("swapsvr", "The IP address of the client's swap server", getenv("swapsvr"));
+    printit("rootpath", "The path name of the client's root disk", getenv("rootpath"));
+    printit("ipttl", "The TTL to use for this network", getenv("ipttl"));
+    printit("mtu", "The MTU to use for this network", getenv("mtu"));
+    printit("broadcast", "The broadcast address for this network", getenv("broadcast"));
+    printit("ntpsrv", "A list of NTP servers", getenv("ntpsrv"));
+    printit("wins", "A list of WINS servers", getenv("wins"));
+    printit("lease", "The lease time, in seconds", getenv("lease"));
+    printit("dhcptype", "DHCP message type (safely ignored)", getenv("dhcptype"));
+    printit("serverid", "The IP of the server", getenv("serverid"));
+    printit("message", "Reason for a DHCPNAK", getenv("message"));
+    printit("tftp", "The TFTP server name", getenv("tftp"));
+    printit("bootfile", "The bootfile name", getenv("bootfile"));
+#endif
+
+    if (!*argv)
+        bb_printf("Error: should be called from udhcpc\n");
+    else
+    {
+        char *interface = getenv("interface");
+
+        if (strcmp(*argv, "deconfig") == 0)
+        {
+#ifdef CONFIG_FEATURE_IFUPDOWN_IP
+            doit(QUIET, "ip route flush dev %s", interface);
+            doit(QUIET, "ip addr flush dev %s", interface);
+            doit(QUIET, "ip link set %s up", interface);
+#else
+            errno = 0;
+            while (errno == 0)
+                doit(QUIET, "route del default gw 0.0.0.0 dev %s", interface);
+            doit(QUIET, "ifconfig %s 0.0.0.0", interface);
+#endif
+        }
+        else if (strcmp(*argv, "nak") == 0)
+            bb_printf("udhcpc received a NAK: %s\n", getenv("message"));
+        else if ((strcmp(*argv, "bound") == 0) || (strcmp(*argv, "renew") == 0))
+        {
+            const char *RESOLV_CONF = "/etc/resolv.conf";
+            char *broadcast = getenv("broadcast");
+            char *subnet = getenv("subnet");
+            char *mask = getenv("mask");
+            char *ip = getenv("ip");
+            char *hostname = getenv("hostname");
+            char *domain = getenv("domain");
+            char *router = getenv("router");
+            char *dns = getenv("dns");
+            char *siaddr = getenv("siaddr");
+            char *tftp = getenv("tftp");
+            char *BROADCAST = "";
+            char *NETMASK = "";
+            char *MASK = "";
+            char *HOSTNAME = 0;
+            int i, metric = 0;
+            char *token;
+            char *strtok_temp;
+
+            if (broadcast != 0)
+                bb_xasprintf(&BROADCAST, "broadcast %s", broadcast);
+            if (subnet != 0)
+                bb_xasprintf(&NETMASK, "netmask %s", subnet);
+            if (mask != 0)
+                bb_xasprintf(&MASK, "/%s", mask);
+            if (hostname != 0)
+                bb_xasprintf(&HOSTNAME, "/%s", hostname);
+#ifdef CONFIG_FEATURE_IFUPDOWN_IP
+            doit(0, "ip addr add %s%s %s dev %s", ip, MASK, BROADCAST, interface);
+            doit(0, "ip link set %s up", interface);
+#else
+            doit(0, "/sbin/ifconfig %s %s %s %s", interface, ip, BROADCAST, NETMASK);
+#endif
+            if (router != 0)
+            {
+                token = strtok_r(router, " ,\t\r\n", &strtok_temp);
+                for (i = 0; token != NULL; i++)
+                {
+#ifdef CONFIG_FEATURE_IFUPDOWN_IP
+                    doit(0, "ip route add to default via %s dev %s", token, interface, metric++);
+#else
+                    doit(0, "route add default gw %s dev %s metric %d", token, interface, metric++);
+#endif
+                    token = strtok_r(NULL, " ,\t\r\n", &strtok_temp);
+                }
+            }
+
+            doit(0, "echo -n > %s", RESOLV_CONF);
+            if (domain != 0)
+                doit(0, "echo \"search %s\" > %s", domain, RESOLV_CONF);
+
+            token = strtok_r(dns, " \r\n", &strtok_temp);
+            for (i = 0; token != NULL; i++)
+            {
+                doit(0, "echo \"nameserver %s\" >> %s", token, RESOLV_CONF);
+
+                token = strtok_r(NULL, " \r\n", &strtok_temp);
+            }
+
+            if (HOSTNAME == 0)
+            {
+                bb_xasprintf(&HOSTNAME, doit(REDIR, "nslookup %s | grep -v default | grep Name | cut -d\":\" -f2 | tr -d ' ' | tail -n 1", ip));
+                if ((HOSTNAME == 0) && (stat("/var/lib/my_linux/config/hostname", &path_stat) == 0))
+                    HOSTNAME = quick_read("/var/lib/my_linux/config/hostname");
+                if (HOSTNAME == 0)
+                    HOSTNAME = "my_linux";
+            }
+            doit(0, "hostname %s", HOSTNAME);
+// Should remove old entry
+            doit(0, "echo \"%s      %s\" >> /etc/hosts", ip, HOSTNAME);
+
+// Should dump these in a per interface file
+            if (siaddr != NULL)
+                quick_write("/var/lib/network/nfsaddr", siaddr);
+            if (tftp != NULL)
+                quick_write("/var/lib/network/tftpaddr", tftp);
+
+            /* This is what the network init script is waiting for. */
+            quick_write("/var/lib/network/ipaddr", ip);
+            bb_printf("IP %s HOSTNAME %s\n", ip, HOSTNAME);
+
+            free(HOSTNAME);
+        }
+        else
+        {
+            bb_printf("Huh?\n");
+        }
+    }
+
+    return EXIT_SUCCESS;
+}
diff --git a/urunlevel/sysdeps/linux/Config.in b/urunlevel/sysdeps/linux/Config.in
new file mode 100644
index 0000000..2e364f2
--- /dev/null
+++ b/urunlevel/sysdeps/linux/Config.in
@@ -0,0 +1,296 @@
+#
+# For a description of the syntax of this configuration file,
+# see scripts/kbuild/config-language.txt.
+#
+
+mainmenu "BusyBox Configuration"
+
+config HAVE_DOT_CONFIG
+        bool
+        default y
+
+menu "General Configuration"
+
+choice
+        prompt "Buffer allocation policy"
+        default CONFIG_FEATURE_BUFFERS_USE_MALLOC
+        help
+          There are 3 ways BusyBox can handle buffer allocations:
+          - Use malloc. This costs code size for the call to xmalloc.
+          - Put them on stack. For some very small machines with limited stack
+            space, this can be deadly.  For most folks, this works just fine.
+          - Put them in BSS. This works beautifully for computers with a real
+            MMU (and OS support), but wastes runtime RAM for uCLinux. This
+            behavior was the only one available for BusyBox versions 0.48 and
+            earlier.
+
+config CONFIG_FEATURE_BUFFERS_USE_MALLOC
+        bool "Allocate with Malloc"
+
+config CONFIG_FEATURE_BUFFERS_GO_ON_STACK
+        bool "Allocate on the Stack"
+
+config CONFIG_FEATURE_BUFFERS_GO_IN_BSS
+        bool "Allocate in the .bss section"
+
+endchoice
+
+config CONFIG_FEATURE_VERBOSE_USAGE
+        bool "Show verbose applet usage messages"
+        default n
+        help
+          All BusyBox applets will show more verbose help messages when
+          busybox is invoked with --help.  This will add a lot of text to the
+          busybox binary.  In the default configuration, this will add about
+          13k, but it can add much more depending on your configuration.
+
+config CONFIG_FEATURE_INSTALLER
+        bool "Support --install [-s] to install applet links at runtime"
+        default n
+        help
+          Enable 'busybox --install [-s]' support.  This will allow you to use
+          busybox at runtime to create hard links or symlinks for all the
+          applets that are compiled into busybox.  This feature requires the
+          /proc filesystem.
+
+config CONFIG_LOCALE_SUPPORT
+        bool "Enable locale support (system needs locale for this to work)"
+        default n
+        help
+          Enable this if your system has locale support and you would like
+          busybox to support locale settings.
+
+config CONFIG_FEATURE_DEVFS
+        bool "Support for devfs"
+        default n
+        help
+          Enable if you want BusyBox to work with devfs.
+
+config CONFIG_FEATURE_DEVPTS
+        bool "Use the devpts filesystem for Unix98 PTYs"
+        default y if CONFIG_FEATURE_DEVFS
+        help
+          Enable if you want BusyBox to use Unix98 PTY support. If enabled,
+          busybox will use /dev/ptmx for the master side of the pseudoterminal
+          and /dev/pts/<number> for the slave side.  Otherwise, BSD style
+          /dev/ttyp<number> will be used. To use this option, you should have
+          devpts or devfs mounted.
+
+config CONFIG_FEATURE_CLEAN_UP
+        bool "Clean up all memory before exiting (usually not needed)"
+        default n
+        help
+          As a size optimization, busybox by default does not cleanup memory
+          that is dynamically allocated or close files before exiting. This
+          saves space and is usually not needed since the OS will clean up for
+          us.  Don't enable this unless you have a really good reason to clean
+          things up manually.
+
+config CONFIG_FEATURE_SUID
+        bool "Support for SUID/SGID handling"
+        default n
+        help
+          Support SUID and SGID binaries.
+
+config CONFIG_FEATURE_SUID_CONFIG
+        bool "Runtime SUID/SGID configuration via /etc/busybox.conf"
+        default y if CONFIG_FEATURE_SUID
+        depends on CONFIG_FEATURE_SUID
+        help
+          Allow the SUID / SGID state of an applet to be determined runtime by
+          checking /etc/busybox.conf.  The format of this file is as follows:
+
+          <applet> = [Ssx-][Ssx-][x-] (<username>|<uid>).(<groupname>|<gid>)
+        
+          An example might help:
+
+          [SUID]
+          su = ssx root.0 # applet su can be run by anyone and runs with euid=0/egid=0
+          su = ssx        # exactly the same
+
+          mount = sx- root.disk # applet mount can be run by root and members of group disk
+                                # and runs with euid=0
+
+          cp = --- # disable applet cp for everyone
+
+          Robert 'sandman' Griebl has more information here:
+          <url: http://www.softforge.de/bb/suid.html >.
+
+config CONFIG_FEATURE_SUID_CONFIG_QUIET
+        bool "Suppress warning message if /etc/busybox.conf is not readable"
+        default n
+        depends on CONFIG_FEATURE_SUID_CONFIG
+        help
+          /etc/busybox.conf should be readable by the user needing the SUID, check
+          this option to avoid users to be notified about missing permissions.
+
+config CONFIG_SELINUX
+        bool "Support NSA Security Enhanced Linux"
+        default n
+        help
+          Enable support for SE Linux in applets ls, ps, and id.  Also provide
+          the option of compiling in SE Linux applets.
+
+          If you do not have a complete SE Linux Full Userland installed, this
+          stuff will not compile.  Go visit
+                http://www.nsa.gov/selinux/index.html
+          to download the necessary stuff to allow busybox to compile with this
+          option enabled.
+
+          Most people will leave this set to 'N'.
+
+endmenu
+
+menu 'Build Options'
+
+config CONFIG_STATIC
+        bool "Build BusyBox as a static binary (no shared libs)"
+        default n
+        help
+          If you want to build a static BusyBox binary, which does not
+          use or require any shared libraries, then enable this option.
+          This can cause BusyBox to be considerably larger, so you should
+          leave this option false unless you have a good reason (i.e.
+          your target platform does not support shared libraries, or
+          you are building an initrd which doesn't need anything but
+          BusyBox, etc).
+
+          Most people will leave this set to 'N'.
+
+config CONFIG_LFS
+        bool "Build with Large File Support (for accessing files > 2 GB)"
+        default n
+        select FDISK_SUPPORT_LARGE_DISKS
+        help
+          If you want to build BusyBox with large file support, then enable
+          this option.  This will have no effect if your kernel or your C
+          library lacks large file support for large files.  Some of the
+          programs that can benefit from large file support include dd, gzip,
+          cp, mount, tar, and many others.  If you want to access files larger
+          than 2 Gigabytes, enable this option.  Otherwise, leave it set to 'N'.
+
+config USING_CROSS_COMPILER
+        bool "Do you want to build BusyBox with a Cross Compiler?"
+        default n
+        help
+          Do you want to build BusyBox with a Cross Compiler?  If so,
+          then enable this option.  Otherwise leave it set to 'N'.
+
+config CROSS_COMPILER_PREFIX
+        string "Cross Compiler prefix"
+        default "/usr/i386-linux-uclibc/bin/i386-uclibc-"
+        depends on USING_CROSS_COMPILER
+        help
+          If you want to build BusyBox with a cross compiler, then you
+          will need to set this to the cross-compiler prefix.  For example,
+          if my cross-compiler is /usr/i386-linux-uclibc/bin/i386-uclibc-gcc
+          then I would enter '/usr/i386-linux-uclibc/bin/i386-uclibc-' here,
+          which will ensure the correct compiler is used.
+
+config EXTRA_CFLAGS_OPTIONS
+        string "Any extra CFLAGS options for the compiler?"
+        default ""
+        help
+          Do you want to pass any extra CFLAGS options to the compiler as
+          you build BusyBox? If so, this is the option for you...  For example,
+          if you want to add some simple compiler switches (like -march=i686),
+          or check for warnings using -Werror, just those options here.
+
+endmenu
+
+menu 'Installation Options'
+
+config CONFIG_INSTALL_NO_USR
+        bool "Don't use /usr"
+        default n
+        help
+          Disable use of /usr. Don't activate this option if you don't know
+          that you really want this behaviour.
+
+config PREFIX
+        string "BusyBox installation prefix"
+        default "./_install"
+        help
+          Define your directory to install BusyBox files/subdirs in.
+
+
+
+endmenu
+
+source archival/Config.in
+source coreutils/Config.in
+source console-tools/Config.in
+source debianutils/Config.in
+source editors/Config.in
+source findutils/Config.in
+source my_linux/Config.in
+source runlevel/Config.in
+source init/Config.in
+source loginutils/Config.in
+source miscutils/Config.in
+source modutils/Config.in
+source networking/Config.in
+source procps/Config.in
+source shell/Config.in
+source sysklogd/Config.in
+source util-linux/Config.in
+
+menu 'Debugging Options'
+
+config CONFIG_DEBUG
+        bool "Build BusyBox with Debugging symbols"
+        default n
+        help
+          Say Y here if you wish to compile BusyBox with debugging symbols.
+          This will allow you to use a debugger to examine BusyBox internals
+          while applets are running.  This increases the size of the binary
+          considerably and should only be used when doing development.
+          If you are doing development and want to debug BusyBox, answer Y.
+
+          Most people should answer N.
+
+choice
+        prompt "Additional debugging library"
+        default CONFIG_NO_DEBUG_LIB
+        depends on CONFIG_DEBUG
+        help
+          Using an additional debugging library will make BusyBox become
+          considerable larger and will cause it to run more slowly.  You
+          should always leave this option disabled for production use.
+
+          dmalloc support:
+          ----------------
+          This enables compiling with dmalloc ( http://dmalloc.com/ )
+          which is an excellent public domain mem leak and malloc problem
+          detector.  To enable dmalloc, before running busybox you will
+          want to properly set your environment, for example:
+            export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile
+          The 'debug=' value is generated using the following command
+            dmalloc -p log-stats -p log-non-free -p log-bad-space -p log-elapsed-time \
+               -p check-fence -p check-heap -p check-lists -p check-blank \
+               -p check-funcs -p realloc-copy -p allow-free-null
+
+          Electric-fence support:
+          -----------------------
+          This enables compiling with Electric-fence support.  Electric
+          fence is another very useful malloc debugging library which uses
+          your computer's virtual memory hardware to detect illegal memory
+          accesses.  This support will make BusyBox be considerable larger
+          and run slower, so you should leave this option disabled unless
+          you are hunting a hard to find memory problem.
+
+
+config CONFIG_NO_DEBUG_LIB
+        bool "None"
+
+config CONFIG_DMALLOC
+        bool "Dmalloc"
+
+config CONFIG_EFENCE
+        bool "Electric-fence"
+
+endchoice
+
+
+endmenu
+