/*
* Copyright (c) 2008, openmetaverse.org, http://opensimulator.org/
* All rights reserved.
*
* - Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
* - Neither the name of the openmetaverse.org nor the names
* of its contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
using System;
using System.Threading;
using System.Collections.Generic;
namespace OpenSim.Framework
{
///
/// A double dictionary that is thread abort safe.
///
///
/// This adapts OpenMetaverse.DoubleDictionary to be thread-abort safe by acquiring ReaderWriterLockSlim within
/// a finally section (which can't be interrupted by Thread.Abort()).
///
public class DoubleDictionaryThreadAbortSafe
{
Dictionary Dictionary1;
Dictionary Dictionary2;
ReaderWriterLockSlim rwLock = new ReaderWriterLockSlim();
public DoubleDictionaryThreadAbortSafe()
{
Dictionary1 = new Dictionary();
Dictionary2 = new Dictionary();
}
public DoubleDictionaryThreadAbortSafe(int capacity)
{
Dictionary1 = new Dictionary(capacity);
Dictionary2 = new Dictionary(capacity);
}
public void Add(TKey1 key1, TKey2 key2, TValue value)
{
bool gotLock = false;
try
{
// Avoid an asynchronous Thread.Abort() from possibly never existing an acquired lock by placing
// the acquision inside the main try. The inner finally block is needed because thread aborts cannot
// interrupt code in these blocks (hence gotLock is guaranteed to be set correctly).
try {}
finally
{
rwLock.EnterWriteLock();
gotLock = true;
}
if (Dictionary1.ContainsKey(key1))
{
if (!Dictionary2.ContainsKey(key2))
throw new ArgumentException("key1 exists in the dictionary but not key2");
}
else if (Dictionary2.ContainsKey(key2))
{
if (!Dictionary1.ContainsKey(key1))
throw new ArgumentException("key2 exists in the dictionary but not key1");
}
Dictionary1[key1] = value;
Dictionary2[key2] = value;
}
finally
{
if (gotLock)
rwLock.ExitWriteLock();
}
}
public bool Remove(TKey1 key1, TKey2 key2)
{
bool success;
bool gotLock = false;
try
{
// Avoid an asynchronous Thread.Abort() from possibly never existing an acquired lock by placing
// the acquision inside the main try. The inner finally block is needed because thread aborts cannot
// interrupt code in these blocks (hence gotLock is guaranteed to be set correctly).
try {}
finally
{
rwLock.EnterWriteLock();
gotLock = true;
}
Dictionary1.Remove(key1);
success = Dictionary2.Remove(key2);
}
finally
{
if (gotLock)
rwLock.ExitWriteLock();
}
return success;
}
public bool Remove(TKey1 key1)
{
bool found = false;
bool gotLock = false;
try
{
// Avoid an asynchronous Thread.Abort() from possibly never existing an acquired lock by placing
// the acquision inside the main try. The inner finally block is needed because thread aborts cannot
// interrupt code in these blocks (hence gotLock is guaranteed to be set correctly).
try {}
finally
{
rwLock.EnterWriteLock();
gotLock = true;
}
// This is an O(n) operation!
TValue value;
if (Dictionary1.TryGetValue(key1, out value))
{
foreach (KeyValuePair kvp in Dictionary2)
{
if (kvp.Value.Equals(value))
{
Dictionary1.Remove(key1);
Dictionary2.Remove(kvp.Key);
found = true;
break;
}
}
}
}
finally
{
if (gotLock)
rwLock.ExitWriteLock();
}
return found;
}
public bool Remove(TKey2 key2)
{
bool found = false;
bool gotLock = false;
try
{
// Avoid an asynchronous Thread.Abort() from possibly never existing an acquired lock by placing
// the acquision inside the main try. The inner finally block is needed because thread aborts cannot
// interrupt code in these blocks (hence gotLock is guaranteed to be set correctly).
try {}
finally
{
rwLock.EnterWriteLock();
gotLock = true;
}
// This is an O(n) operation!
TValue value;
if (Dictionary2.TryGetValue(key2, out value))
{
foreach (KeyValuePair kvp in Dictionary1)
{
if (kvp.Value.Equals(value))
{
Dictionary2.Remove(key2);
Dictionary1.Remove(kvp.Key);
found = true;
break;
}
}
}
}
finally
{
if (gotLock)
rwLock.ExitWriteLock();
}
return found;
}
public void Clear()
{
bool gotLock = false;
try
{
// Avoid an asynchronous Thread.Abort() from possibly never existing an acquired lock by placing
// the acquision inside the main try. The inner finally block is needed because thread aborts cannot
// interrupt code in these blocks (hence gotLock is guaranteed to be set correctly).
try {}
finally
{
rwLock.EnterWriteLock();
gotLock = true;
}
Dictionary1.Clear();
Dictionary2.Clear();
}
finally
{
if (gotLock)
rwLock.ExitWriteLock();
}
}
public int Count
{
get { return Dictionary1.Count; }
}
public bool ContainsKey(TKey1 key)
{
return Dictionary1.ContainsKey(key);
}
public bool ContainsKey(TKey2 key)
{
return Dictionary2.ContainsKey(key);
}
public bool TryGetValue(TKey1 key, out TValue value)
{
bool success;
bool gotLock = false;
try
{
// Avoid an asynchronous Thread.Abort() from possibly never existing an acquired lock by placing
// the acquision inside the main try. The inner finally block is needed because thread aborts cannot
// interrupt code in these blocks (hence gotLock is guaranteed to be set correctly).
try {}
finally
{
rwLock.EnterReadLock();
gotLock = true;
}
success = Dictionary1.TryGetValue(key, out value);
}
finally
{
if (gotLock)
rwLock.ExitReadLock();
}
return success;
}
public bool TryGetValue(TKey2 key, out TValue value)
{
bool success;
bool gotLock = false;
try
{
// Avoid an asynchronous Thread.Abort() from possibly never existing an acquired lock by placing
// the acquision inside the main try. The inner finally block is needed because thread aborts cannot
// interrupt code in these blocks (hence gotLock is guaranteed to be set correctly).
try {}
finally
{
rwLock.EnterReadLock();
gotLock = true;
}
success = Dictionary2.TryGetValue(key, out value);
}
finally
{
if (gotLock)
rwLock.ExitReadLock();
}
return success;
}
public void ForEach(Action action)
{
bool gotLock = false;
try
{
// Avoid an asynchronous Thread.Abort() from possibly never existing an acquired lock by placing
// the acquision inside the main try. The inner finally block is needed because thread aborts cannot
// interrupt code in these blocks (hence gotLock is guaranteed to be set correctly).
try {}
finally
{
rwLock.EnterReadLock();
gotLock = true;
}
foreach (TValue value in Dictionary1.Values)
action(value);
}
finally
{
if (gotLock)
rwLock.ExitReadLock();
}
}
public void ForEach(Action> action)
{
bool gotLock = false;
try
{
// Avoid an asynchronous Thread.Abort() from possibly never existing an acquired lock by placing
// the acquision inside the main try. The inner finally block is needed because thread aborts cannot
// interrupt code in these blocks (hence gotLock is guaranteed to be set correctly).
try {}
finally
{
rwLock.EnterReadLock();
gotLock = true;
}
foreach (KeyValuePair entry in Dictionary1)
action(entry);
}
finally
{
if (gotLock)
rwLock.ExitReadLock();
}
}
public void ForEach(Action> action)
{
bool gotLock = false;
try
{
// Avoid an asynchronous Thread.Abort() from possibly never existing an acquired lock by placing
// the acquision inside the main try. The inner finally block is needed because thread aborts cannot
// interrupt code in these blocks (hence gotLock is guaranteed to be set correctly).
try {}
finally
{
rwLock.EnterReadLock();
gotLock = true;
}
foreach (KeyValuePair entry in Dictionary2)
action(entry);
}
finally
{
if (gotLock)
rwLock.ExitReadLock();
}
}
public TValue FindValue(Predicate predicate)
{
bool gotLock = false;
try
{
// Avoid an asynchronous Thread.Abort() from possibly never existing an acquired lock by placing
// the acquision inside the main try. The inner finally block is needed because thread aborts cannot
// interrupt code in these blocks (hence gotLock is guaranteed to be set correctly).
try {}
finally
{
rwLock.EnterReadLock();
gotLock = true;
}
foreach (TValue value in Dictionary1.Values)
{
if (predicate(value))
return value;
}
}
finally
{
if (gotLock)
rwLock.ExitReadLock();
}
return default(TValue);
}
public IList FindAll(Predicate predicate)
{
IList list = new List();
bool gotLock = false;
try
{
// Avoid an asynchronous Thread.Abort() from possibly never existing an acquired lock by placing
// the acquision inside the main try. The inner finally block is needed because thread aborts cannot
// interrupt code in these blocks (hence gotLock is guaranteed to be set correctly).
try {}
finally
{
rwLock.EnterReadLock();
gotLock = true;
}
foreach (TValue value in Dictionary1.Values)
{
if (predicate(value))
list.Add(value);
}
}
finally
{
if (gotLock)
rwLock.ExitReadLock();
}
return list;
}
public int RemoveAll(Predicate predicate)
{
IList list = new List();
bool gotUpgradeableLock = false;
try
{
// Avoid an asynchronous Thread.Abort() from possibly never existing an acquired lock by placing
// the acquision inside the main try. The inner finally block is needed because thread aborts cannot
// interrupt code in these blocks (hence gotLock is guaranteed to be set correctly).
try {}
finally
{
rwLock.EnterUpgradeableReadLock();
gotUpgradeableLock = true;
}
foreach (KeyValuePair kvp in Dictionary1)
{
if (predicate(kvp.Value))
list.Add(kvp.Key);
}
IList list2 = new List(list.Count);
foreach (KeyValuePair kvp in Dictionary2)
{
if (predicate(kvp.Value))
list2.Add(kvp.Key);
}
bool gotWriteLock = false;
try
{
try {}
finally
{
rwLock.EnterUpgradeableReadLock();
gotWriteLock = true;
}
for (int i = 0; i < list.Count; i++)
Dictionary1.Remove(list[i]);
for (int i = 0; i < list2.Count; i++)
Dictionary2.Remove(list2[i]);
}
finally
{
if (gotWriteLock)
rwLock.ExitWriteLock();
}
}
finally
{
if (gotUpgradeableLock)
rwLock.ExitUpgradeableReadLock();
}
return list.Count;
}
}
}