From b6b505163c98683adaf7f298026c5bd2f954c05c Mon Sep 17 00:00:00 2001 From: Robert Adams Date: Tue, 2 Oct 2012 10:50:29 -0700 Subject: BulletSim: call ForcePosition and ForceOrientation in BSDynamics so there is no lag between what the vehicle code sees and what the physics engine is using. --- OpenSim/Region/Physics/BulletSPlugin/BSDynamics.cs | 96 +++++++++++++--------- 1 file changed, 57 insertions(+), 39 deletions(-) (limited to 'OpenSim/Region') diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSDynamics.cs b/OpenSim/Region/Physics/BulletSPlugin/BSDynamics.cs index cbfd7e3..4ba2f62 100644 --- a/OpenSim/Region/Physics/BulletSPlugin/BSDynamics.cs +++ b/OpenSim/Region/Physics/BulletSPlugin/BSDynamics.cs @@ -92,7 +92,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin private float m_angularMotorDecayTimescale = 0; // motor angular velocity decay rate private Vector3 m_angularFrictionTimescale = Vector3.Zero; // body angular velocity decay rate private Vector3 m_lastAngularVelocity = Vector3.Zero; // what was last applied to body - // private Vector3 m_lastVertAttractor = Vector3.Zero; // what VA was last applied to body + private Vector3 m_lastVertAttractor = Vector3.Zero; // what VA was last applied to body //Deflection properties // private float m_angularDeflectionEfficiency = 0; @@ -352,8 +352,9 @@ namespace OpenSim.Region.Physics.BulletSPlugin // m_bankingMix = 1; // m_bankingTimescale = 1; // m_referenceFrame = Quaternion.Identity; - m_flags |= (VehicleFlag.NO_DEFLECTION_UP | VehicleFlag.LIMIT_ROLL_ONLY | - VehicleFlag.LIMIT_MOTOR_UP); + m_flags |= (VehicleFlag.NO_DEFLECTION_UP + | VehicleFlag.LIMIT_ROLL_ONLY + | VehicleFlag.LIMIT_MOTOR_UP); m_flags &= ~(VehicleFlag.HOVER_WATER_ONLY | VehicleFlag.HOVER_TERRAIN_ONLY | VehicleFlag.HOVER_GLOBAL_HEIGHT); m_flags |= (VehicleFlag.HOVER_UP_ONLY); break; @@ -380,12 +381,13 @@ namespace OpenSim.Region.Physics.BulletSPlugin // m_bankingMix = 0.8f; // m_bankingTimescale = 1; // m_referenceFrame = Quaternion.Identity; - m_flags &= ~(VehicleFlag.HOVER_TERRAIN_ONLY | - VehicleFlag.HOVER_GLOBAL_HEIGHT | VehicleFlag.HOVER_UP_ONLY); - m_flags &= ~(VehicleFlag.LIMIT_ROLL_ONLY); - m_flags |= (VehicleFlag.NO_DEFLECTION_UP | - VehicleFlag.LIMIT_MOTOR_UP); - m_flags |= (VehicleFlag.HOVER_WATER_ONLY); + m_flags &= ~(VehicleFlag.HOVER_TERRAIN_ONLY + | VehicleFlag.HOVER_GLOBAL_HEIGHT + | VehicleFlag.LIMIT_ROLL_ONLY + | VehicleFlag.HOVER_UP_ONLY); + m_flags |= (VehicleFlag.NO_DEFLECTION_UP + | VehicleFlag.LIMIT_MOTOR_UP + | VehicleFlag.HOVER_WATER_ONLY); break; case Vehicle.TYPE_AIRPLANE: m_linearFrictionTimescale = new Vector3(200, 10, 5); @@ -410,9 +412,12 @@ namespace OpenSim.Region.Physics.BulletSPlugin // m_bankingMix = 0.7f; // m_bankingTimescale = 2; // m_referenceFrame = Quaternion.Identity; - m_flags &= ~(VehicleFlag.HOVER_WATER_ONLY | VehicleFlag.HOVER_TERRAIN_ONLY | - VehicleFlag.HOVER_GLOBAL_HEIGHT | VehicleFlag.HOVER_UP_ONLY); - m_flags &= ~(VehicleFlag.NO_DEFLECTION_UP | VehicleFlag.LIMIT_MOTOR_UP); + m_flags &= ~(VehicleFlag.HOVER_WATER_ONLY + | VehicleFlag.HOVER_TERRAIN_ONLY + | VehicleFlag.HOVER_GLOBAL_HEIGHT + | VehicleFlag.HOVER_UP_ONLY + | VehicleFlag.NO_DEFLECTION_UP + | VehicleFlag.LIMIT_MOTOR_UP); m_flags |= (VehicleFlag.LIMIT_ROLL_ONLY); break; case Vehicle.TYPE_BALLOON: @@ -438,11 +443,13 @@ namespace OpenSim.Region.Physics.BulletSPlugin // m_bankingMix = 0.7f; // m_bankingTimescale = 5; // m_referenceFrame = Quaternion.Identity; - m_flags &= ~(VehicleFlag.HOVER_WATER_ONLY | VehicleFlag.HOVER_TERRAIN_ONLY | - VehicleFlag.HOVER_UP_ONLY); - m_flags &= ~(VehicleFlag.NO_DEFLECTION_UP | VehicleFlag.LIMIT_MOTOR_UP); - m_flags |= (VehicleFlag.LIMIT_ROLL_ONLY); - m_flags |= (VehicleFlag.HOVER_GLOBAL_HEIGHT); + m_flags &= ~(VehicleFlag.HOVER_WATER_ONLY + | VehicleFlag.HOVER_TERRAIN_ONLY + | VehicleFlag.HOVER_UP_ONLY + | VehicleFlag.NO_DEFLECTION_UP + | VehicleFlag.LIMIT_MOTOR_UP); + m_flags |= (VehicleFlag.LIMIT_ROLL_ONLY + | VehicleFlag.HOVER_GLOBAL_HEIGHT); break; } }//end SetDefaultsForType @@ -451,7 +458,8 @@ namespace OpenSim.Region.Physics.BulletSPlugin // Do any updating needed for a vehicle public void Refresh() { - if (Type == Vehicle.TYPE_NONE) return; + if (!IsActive) + return; // Set the prim's inertia to zero. The vehicle code handles that and this // removes the torque action introduced by Bullet. @@ -470,7 +478,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin LimitRotation(pTimestep); // remember the position so next step we can limit absolute movement effects - m_lastPositionVector = Prim.Position; + m_lastPositionVector = Prim.ForcePosition; VDetailLog("{0},BSDynamics.Step,done,pos={1},force={2},velocity={3},angvel={4}", Prim.LocalID, Prim.Position, Prim.Force, Prim.Velocity, Prim.RotationalVelocity); @@ -524,7 +532,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin } // convert requested object velocity to object relative vector - Quaternion rotq = Prim.Orientation; + Quaternion rotq = Prim.ForceOrientation; m_newVelocity = m_lastLinearVelocityVector * rotq; // Add the various forces into m_dir which will be our new direction vector (velocity) @@ -541,19 +549,19 @@ namespace OpenSim.Region.Physics.BulletSPlugin m_dir.Z = vel_now.Z; // Preserve the accumulated falling velocity */ - Vector3 pos = Prim.Position; + Vector3 pos = Prim.ForcePosition; // Vector3 accel = new Vector3(-(m_dir.X - m_lastLinearVelocityVector.X / 0.1f), -(m_dir.Y - m_lastLinearVelocityVector.Y / 0.1f), m_dir.Z - m_lastLinearVelocityVector.Z / 0.1f); // If below the terrain, move us above the ground a little. float terrainHeight = Prim.PhysicsScene.TerrainManager.GetTerrainHeightAtXYZ(pos); // Taking the rotated size doesn't work here because m_prim.Size is the size of the root prim and not the linkset. // Need to add a m_prim.LinkSet.Size similar to m_prim.LinkSet.Mass. - // Vector3 rotatedSize = m_prim.Size * m_prim.Orientation; + // Vector3 rotatedSize = m_prim.Size * m_prim.ForceOrientation; // if (rotatedSize.Z < terrainHeight) if (pos.Z < terrainHeight) { pos.Z = terrainHeight + 2; - Prim.Position = pos; + Prim.ForcePosition = pos; VDetailLog("{0},MoveLinear,terrainHeight,terrainHeight={1},pos={2}", Prim.LocalID, terrainHeight, pos); } @@ -583,7 +591,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin { if ((pos.Z - m_VhoverTargetHeight) > .2 || (pos.Z - m_VhoverTargetHeight) < -.2) { - Prim.Position = pos; + Prim.ForcePosition = pos; } } else @@ -635,12 +643,13 @@ namespace OpenSim.Region.Physics.BulletSPlugin } if (changed) { - Prim.Position = pos; + Prim.ForcePosition = pos; VDetailLog("{0},MoveLinear,blockingEndPoint,block={1},origPos={2},pos={3}", Prim.LocalID, m_BlockingEndPoint, posChange, pos); } } + // Limit absolute vertical change float Zchange = Math.Abs(posChange.Z); if ((m_flags & (VehicleFlag.LIMIT_MOTOR_UP)) != 0) { @@ -659,6 +668,8 @@ namespace OpenSim.Region.Physics.BulletSPlugin grav.Z = (float)(grav.Z * 1.037125); VDetailLog("{0},MoveLinear,limitMotorUp,grav={1}", Prim.LocalID, grav); } + + // If not changing some axis, reduce out velocity if ((m_flags & (VehicleFlag.NO_X)) != 0) m_newVelocity.X = 0; if ((m_flags & (VehicleFlag.NO_Y)) != 0) @@ -701,19 +712,19 @@ namespace OpenSim.Region.Physics.BulletSPlugin // a newly set velocity, this routine steps the value from the previous // value (m_angularMotorVelocity) to the requested value (m_angularMotorDirection). // There are m_angularMotorApply steps. - Vector3 origAngularVelocity = m_angularMotorVelocity; + Vector3 origVel = m_angularMotorVelocity; + Vector3 origDir = m_angularMotorDirection; + // ramp up to new value - // current velocity += error / ( time to get there / step interval) + // new velocity += error / ( time to get there / step interval) // requested speed - last motor speed m_angularMotorVelocity.X += (m_angularMotorDirection.X - m_angularMotorVelocity.X) / (m_angularMotorTimescale / pTimestep); m_angularMotorVelocity.Y += (m_angularMotorDirection.Y - m_angularMotorVelocity.Y) / (m_angularMotorTimescale / pTimestep); m_angularMotorVelocity.Z += (m_angularMotorDirection.Z - m_angularMotorVelocity.Z) / (m_angularMotorTimescale / pTimestep); - VDetailLog("{0},MoveAngular,angularMotorApply,apply={1},angTScale={2},timeStep={3},origvel={4},dir={5},vel={6}", - Prim.LocalID, m_angularMotorApply, m_angularMotorTimescale, pTimestep, origAngularVelocity, m_angularMotorDirection, m_angularMotorVelocity); + VDetailLog("{0},MoveAngular,angularMotorApply,apply={1},angTScale={2},timeStep={3},origvel={4},origDir={5},vel={6}", + Prim.LocalID, m_angularMotorApply, m_angularMotorTimescale, pTimestep, origVel, origDir, m_angularMotorVelocity); - // This is done so that if script request rate is less than phys frame rate the expected - // velocity may still be acheived. m_angularMotorApply--; } else @@ -727,25 +738,32 @@ namespace OpenSim.Region.Physics.BulletSPlugin // Vertical attractor section Vector3 vertattr = Vector3.Zero; - if (m_verticalAttractionTimescale < 300) + Vector3 deflection = Vector3.Zero; + Vector3 banking = Vector3.Zero; + + if (m_verticalAttractionTimescale < 300 && m_lastAngularVelocity != Vector3.Zero) { float VAservo = 0.2f / (m_verticalAttractionTimescale / pTimestep); + VAservo *= (m_verticalAttractionEfficiency * m_verticalAttractionEfficiency); + // get present body rotation - Quaternion rotq = Prim.Orientation; - // make a vector pointing up + Quaternion rotq = Prim.ForceOrientation; + // vector pointing up Vector3 verterr = Vector3.Zero; verterr.Z = 1.0f; + // rotate it to Body Angle verterr = verterr * rotq; - // verterr.X and .Y are the World error ammounts. They are 0 when there is no error (Vehicle Body is 'vertical'), and .Z will be 1. + // verterr.X and .Y are the World error amounts. They are 0 when there is no error (Vehicle Body is 'vertical'), and .Z will be 1. // As the body leans to its side |.X| will increase to 1 and .Z fall to 0. As body inverts |.X| will fall and .Z will go // negative. Similar for tilt and |.Y|. .X and .Y must be modulated to prevent a stable inverted body. + + // Error is 0 (no error) to +/- 2 (max error) if (verterr.Z < 0.0f) { verterr.X = 2.0f - verterr.X; verterr.Y = 2.0f - verterr.Y; } - // Error is 0 (no error) to +/- 2 (max error) // scale it by VAservo verterr = verterr * VAservo; @@ -765,7 +783,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin } // else vertical attractor is off - // m_lastVertAttractor = vertattr; + m_lastVertAttractor = vertattr; // Bank section tba @@ -799,7 +817,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin internal void LimitRotation(float timestep) { - Quaternion rotq = Prim.Orientation; + Quaternion rotq = Prim.ForceOrientation; Quaternion m_rot = rotq; bool changed = false; if (m_RollreferenceFrame != Quaternion.Identity) @@ -834,7 +852,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin } if (changed) { - Prim.Orientation = m_rot; + Prim.ForceOrientation = m_rot; VDetailLog("{0},LimitRotation,done,orig={1},new={2}", Prim.LocalID, rotq, m_rot); } -- cgit v1.1