From 51ea39199bc875aa0803231aa1dfc43471fcabd6 Mon Sep 17 00:00:00 2001
From: Diva Canto
Date: Thu, 8 Oct 2009 15:42:08 -0700
Subject: Putting the lock back in TryGetValue.
---
.../ClientStack/LindenUDP/LLUDPClientCollection.cs | 18 +-
.../Region/ClientStack/LindenUDP/OpenSimUDPBase.cs | 680 ++++++++++-----------
2 files changed, 349 insertions(+), 349 deletions(-)
(limited to 'OpenSim/Region')
diff --git a/OpenSim/Region/ClientStack/LindenUDP/LLUDPClientCollection.cs b/OpenSim/Region/ClientStack/LindenUDP/LLUDPClientCollection.cs
index f6ccf01..dbb9861 100644
--- a/OpenSim/Region/ClientStack/LindenUDP/LLUDPClientCollection.cs
+++ b/OpenSim/Region/ClientStack/LindenUDP/LLUDPClientCollection.cs
@@ -224,16 +224,16 @@ namespace OpenSim.Region.ClientStack.LindenUDP
////return success;
- //lock (m_sync)
- // return Dictionary1.TryGetValue(key, out value);
+ lock (m_sync)
+ return Dictionary1.TryGetValue(key, out value);
- try
- {
- return Dictionary1.TryGetValue(key, out value);
- }
- catch { }
- value = null;
- return false;
+ //try
+ //{
+ // return Dictionary1.TryGetValue(key, out value);
+ //}
+ //catch { }
+ //value = null;
+ //return false;
}
public bool TryGetValue(IPEndPoint key, out LLUDPClient value)
diff --git a/OpenSim/Region/ClientStack/LindenUDP/OpenSimUDPBase.cs b/OpenSim/Region/ClientStack/LindenUDP/OpenSimUDPBase.cs
index aaefbc6..218aaac 100644
--- a/OpenSim/Region/ClientStack/LindenUDP/OpenSimUDPBase.cs
+++ b/OpenSim/Region/ClientStack/LindenUDP/OpenSimUDPBase.cs
@@ -1,340 +1,340 @@
-/*
- * Copyright (c) 2006, Clutch, Inc.
- * Original Author: Jeff Cesnik
- * All rights reserved.
- *
- * - Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * - Redistributions of source code must retain the above copyright notice, this
- * list of conditions and the following disclaimer.
- * - Neither the name of the openmetaverse.org nor the names
- * of its contributors may be used to endorse or promote products derived from
- * this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-using System;
-using System.Net;
-using System.Net.Sockets;
-using System.Threading;
-using OpenMetaverse;
-
-namespace OpenSim.Region.ClientStack.LindenUDP
-{
- ///
- ///
- ///
- public abstract class OpenSimUDPBase
- {
- // these abstract methods must be implemented in a derived class to actually do
- // something with the packets that are sent and received.
- protected abstract void PacketReceived(UDPPacketBuffer buffer);
- protected abstract void PacketSent(UDPPacketBuffer buffer, int bytesSent);
-
- // the port to listen on
- internal int udpPort;
-
- // the UDP socket
- private Socket udpSocket;
-
- // the ReaderWriterLock is used solely for the purposes of shutdown (Stop()).
- // since there are potentially many "reader" threads in the internal .NET IOCP
- // thread pool, this is a cheaper synchronization primitive than using
- // a Mutex object. This allows many UDP socket "reads" concurrently - when
- // Stop() is called, it attempts to obtain a writer lock which will then
- // wait until all outstanding operations are completed before shutting down.
- // this avoids the problem of closing the socket with outstanding operations
- // and trying to catch the inevitable ObjectDisposedException.
- private ReaderWriterLock rwLock = new ReaderWriterLock();
-
- // number of outstanding operations. This is a reference count
- // which we use to ensure that the threads exit cleanly. Note that
- // we need this because the threads will potentially still need to process
- // data even after the socket is closed.
- private int rwOperationCount = 0;
-
- // the all important shutdownFlag. This is synchronized through the ReaderWriterLock.
- private volatile bool shutdownFlag = true;
-
- // the remote endpoint to communicate with
- protected IPEndPoint remoteEndPoint = null;
-
-
- ///
- /// Initialize the UDP packet handler in server mode
- ///
- /// Port to listening for incoming UDP packets on
- public OpenSimUDPBase(int port)
- {
- udpPort = port;
- }
-
- ///
- /// Initialize the UDP packet handler in client mode
- ///
- /// Remote UDP server to connect to
- public OpenSimUDPBase(IPEndPoint endPoint)
- {
- remoteEndPoint = endPoint;
- udpPort = 0;
- }
-
- ///
- ///
- ///
- public void Start()
- {
- if (shutdownFlag)
- {
- if (remoteEndPoint == null)
- {
- // Server mode
-
- // create and bind the socket
- IPEndPoint ipep = new IPEndPoint(Settings.BIND_ADDR, udpPort);
- udpSocket = new Socket(
- AddressFamily.InterNetwork,
- SocketType.Dgram,
- ProtocolType.Udp);
- udpSocket.Bind(ipep);
- }
- else
- {
- // Client mode
- IPEndPoint ipep = new IPEndPoint(Settings.BIND_ADDR, udpPort);
- udpSocket = new Socket(
- AddressFamily.InterNetwork,
- SocketType.Dgram,
- ProtocolType.Udp);
- udpSocket.Bind(ipep);
- //udpSocket.Connect(remoteEndPoint);
- }
-
- // we're not shutting down, we're starting up
- shutdownFlag = false;
-
- // kick off an async receive. The Start() method will return, the
- // actual receives will occur asynchronously and will be caught in
- // AsyncEndRecieve().
- AsyncBeginReceive();
- }
- }
-
- ///
- ///
- ///
- public void Stop()
- {
- if (!shutdownFlag)
- {
- // wait indefinitely for a writer lock. Once this is called, the .NET runtime
- // will deny any more reader locks, in effect blocking all other send/receive
- // threads. Once we have the lock, we set shutdownFlag to inform the other
- // threads that the socket is closed.
- rwLock.AcquireWriterLock(-1);
- shutdownFlag = true;
- udpSocket.Close();
- rwLock.ReleaseWriterLock();
-
- // wait for any pending operations to complete on other
- // threads before exiting.
- const int FORCE_STOP = 100;
- int i = 0;
- while (rwOperationCount > 0 && i < FORCE_STOP)
- {
- Thread.Sleep(10);
- ++i;
- }
-
- if (i >= FORCE_STOP)
- {
- Logger.Log("UDPBase.Stop() forced shutdown while waiting on pending operations",
- Helpers.LogLevel.Warning);
- }
- }
- }
-
- ///
- ///
- ///
- public bool IsRunning
- {
- get { return !shutdownFlag; }
- }
-
- private void AsyncBeginReceive()
- {
- // this method actually kicks off the async read on the socket.
- // we aquire a reader lock here to ensure that no other thread
- // is trying to set shutdownFlag and close the socket.
- rwLock.AcquireReaderLock(-1);
-
- if (!shutdownFlag)
- {
- // increment the count of pending operations
- Interlocked.Increment(ref rwOperationCount);
-
- // allocate a packet buffer
- //WrappedObject wrappedBuffer = Pool.CheckOut();
- UDPPacketBuffer buf = new UDPPacketBuffer();
-
- try
- {
- // kick off an async read
- udpSocket.BeginReceiveFrom(
- //wrappedBuffer.Instance.Data,
- buf.Data,
- 0,
- UDPPacketBuffer.BUFFER_SIZE,
- SocketFlags.None,
- //ref wrappedBuffer.Instance.RemoteEndPoint,
- ref buf.RemoteEndPoint,
- new AsyncCallback(AsyncEndReceive),
- //wrappedBuffer);
- buf);
- }
- catch (SocketException)
- {
- // something bad happened
- //Logger.Log(
- // "A SocketException occurred in UDPServer.AsyncBeginReceive()",
- // Helpers.LogLevel.Error, se);
-
- // an error occurred, therefore the operation is void. Decrement the reference count.
- Interlocked.Decrement(ref rwOperationCount);
- }
- }
-
- // we're done with the socket for now, release the reader lock.
- rwLock.ReleaseReaderLock();
- }
-
- private void AsyncEndReceive(IAsyncResult iar)
- {
- // Asynchronous receive operations will complete here through the call
- // to AsyncBeginReceive
-
- // aquire a reader lock
- rwLock.AcquireReaderLock(-1);
-
- if (!shutdownFlag)
- {
- // get the buffer that was created in AsyncBeginReceive
- // this is the received data
- //WrappedObject wrappedBuffer = (WrappedObject)iar.AsyncState;
- //UDPPacketBuffer buffer = wrappedBuffer.Instance;
- UDPPacketBuffer buffer = (UDPPacketBuffer)iar.AsyncState;
-
- try
- {
- // get the length of data actually read from the socket, store it with the
- // buffer
- buffer.DataLength = udpSocket.EndReceiveFrom(iar, ref buffer.RemoteEndPoint);
-
- // this operation is now complete, decrement the reference count
- Interlocked.Decrement(ref rwOperationCount);
-
- // we're done with the socket, release the reader lock
- rwLock.ReleaseReaderLock();
-
- // call the abstract method PacketReceived(), passing the buffer that
- // has just been filled from the socket read.
- PacketReceived(buffer);
- }
- catch (SocketException)
- {
- // an error occurred, therefore the operation is void. Decrement the reference count.
- Interlocked.Decrement(ref rwOperationCount);
-
- // we're done with the socket for now, release the reader lock.
- rwLock.ReleaseReaderLock();
- }
- finally
- {
- // start another receive - this keeps the server going!
- AsyncBeginReceive();
-
- //wrappedBuffer.Dispose();
- }
- }
- else
- {
- // nothing bad happened, but we are done with the operation
- // decrement the reference count and release the reader lock
- Interlocked.Decrement(ref rwOperationCount);
- rwLock.ReleaseReaderLock();
- }
- }
-
- public void AsyncBeginSend(UDPPacketBuffer buf)
- {
- rwLock.AcquireReaderLock(-1);
-
- if (!shutdownFlag)
- {
- try
- {
- Interlocked.Increment(ref rwOperationCount);
- udpSocket.BeginSendTo(
- buf.Data,
- 0,
- buf.DataLength,
- SocketFlags.None,
- buf.RemoteEndPoint,
- new AsyncCallback(AsyncEndSend),
- buf);
- }
- catch (SocketException)
- {
- //Logger.Log(
- // "A SocketException occurred in UDPServer.AsyncBeginSend()",
- // Helpers.LogLevel.Error, se);
- }
- }
-
- rwLock.ReleaseReaderLock();
- }
-
- private void AsyncEndSend(IAsyncResult iar)
- {
- rwLock.AcquireReaderLock(-1);
-
- if (!shutdownFlag)
- {
- UDPPacketBuffer buffer = (UDPPacketBuffer)iar.AsyncState;
-
- try
- {
- int bytesSent = udpSocket.EndSendTo(iar);
-
- // note that call to the abstract PacketSent() method - we are passing the number
- // of bytes sent in a separate parameter, since we can't use buffer.DataLength which
- // is the number of bytes to send (or bytes received depending upon whether this
- // buffer was part of a send or a receive).
- PacketSent(buffer, bytesSent);
- }
- catch (SocketException)
- {
- //Logger.Log(
- // "A SocketException occurred in UDPServer.AsyncEndSend()",
- // Helpers.LogLevel.Error, se);
- }
- }
-
- Interlocked.Decrement(ref rwOperationCount);
- rwLock.ReleaseReaderLock();
- }
- }
-}
+/*
+ * Copyright (c) 2006, Clutch, Inc.
+ * Original Author: Jeff Cesnik
+ * All rights reserved.
+ *
+ * - Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ * - Neither the name of the openmetaverse.org nor the names
+ * of its contributors may be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+using System;
+using System.Net;
+using System.Net.Sockets;
+using System.Threading;
+using OpenMetaverse;
+
+namespace OpenSim.Region.ClientStack.LindenUDP
+{
+ ///
+ ///
+ ///
+ public abstract class OpenSimUDPBase
+ {
+ // these abstract methods must be implemented in a derived class to actually do
+ // something with the packets that are sent and received.
+ protected abstract void PacketReceived(UDPPacketBuffer buffer);
+ protected abstract void PacketSent(UDPPacketBuffer buffer, int bytesSent);
+
+ // the port to listen on
+ internal int udpPort;
+
+ // the UDP socket
+ private Socket udpSocket;
+
+ // the ReaderWriterLock is used solely for the purposes of shutdown (Stop()).
+ // since there are potentially many "reader" threads in the internal .NET IOCP
+ // thread pool, this is a cheaper synchronization primitive than using
+ // a Mutex object. This allows many UDP socket "reads" concurrently - when
+ // Stop() is called, it attempts to obtain a writer lock which will then
+ // wait until all outstanding operations are completed before shutting down.
+ // this avoids the problem of closing the socket with outstanding operations
+ // and trying to catch the inevitable ObjectDisposedException.
+ private ReaderWriterLock rwLock = new ReaderWriterLock();
+
+ // number of outstanding operations. This is a reference count
+ // which we use to ensure that the threads exit cleanly. Note that
+ // we need this because the threads will potentially still need to process
+ // data even after the socket is closed.
+ private int rwOperationCount = 0;
+
+ // the all important shutdownFlag. This is synchronized through the ReaderWriterLock.
+ private volatile bool shutdownFlag = true;
+
+ // the remote endpoint to communicate with
+ protected IPEndPoint remoteEndPoint = null;
+
+
+ ///
+ /// Initialize the UDP packet handler in server mode
+ ///
+ /// Port to listening for incoming UDP packets on
+ public OpenSimUDPBase(int port)
+ {
+ udpPort = port;
+ }
+
+ ///
+ /// Initialize the UDP packet handler in client mode
+ ///
+ /// Remote UDP server to connect to
+ public OpenSimUDPBase(IPEndPoint endPoint)
+ {
+ remoteEndPoint = endPoint;
+ udpPort = 0;
+ }
+
+ ///
+ ///
+ ///
+ public void Start()
+ {
+ if (shutdownFlag)
+ {
+ if (remoteEndPoint == null)
+ {
+ // Server mode
+
+ // create and bind the socket
+ IPEndPoint ipep = new IPEndPoint(Settings.BIND_ADDR, udpPort);
+ udpSocket = new Socket(
+ AddressFamily.InterNetwork,
+ SocketType.Dgram,
+ ProtocolType.Udp);
+ udpSocket.Bind(ipep);
+ }
+ else
+ {
+ // Client mode
+ IPEndPoint ipep = new IPEndPoint(Settings.BIND_ADDR, udpPort);
+ udpSocket = new Socket(
+ AddressFamily.InterNetwork,
+ SocketType.Dgram,
+ ProtocolType.Udp);
+ udpSocket.Bind(ipep);
+ //udpSocket.Connect(remoteEndPoint);
+ }
+
+ // we're not shutting down, we're starting up
+ shutdownFlag = false;
+
+ // kick off an async receive. The Start() method will return, the
+ // actual receives will occur asynchronously and will be caught in
+ // AsyncEndRecieve().
+ AsyncBeginReceive();
+ }
+ }
+
+ ///
+ ///
+ ///
+ public void Stop()
+ {
+ if (!shutdownFlag)
+ {
+ // wait indefinitely for a writer lock. Once this is called, the .NET runtime
+ // will deny any more reader locks, in effect blocking all other send/receive
+ // threads. Once we have the lock, we set shutdownFlag to inform the other
+ // threads that the socket is closed.
+ rwLock.AcquireWriterLock(-1);
+ shutdownFlag = true;
+ udpSocket.Close();
+ rwLock.ReleaseWriterLock();
+
+ // wait for any pending operations to complete on other
+ // threads before exiting.
+ const int FORCE_STOP = 100;
+ int i = 0;
+ while (rwOperationCount > 0 && i < FORCE_STOP)
+ {
+ Thread.Sleep(10);
+ ++i;
+ }
+
+ if (i >= FORCE_STOP)
+ {
+ Logger.Log("UDPBase.Stop() forced shutdown while waiting on pending operations",
+ Helpers.LogLevel.Warning);
+ }
+ }
+ }
+
+ ///
+ ///
+ ///
+ public bool IsRunning
+ {
+ get { return !shutdownFlag; }
+ }
+
+ private void AsyncBeginReceive()
+ {
+ // this method actually kicks off the async read on the socket.
+ // we aquire a reader lock here to ensure that no other thread
+ // is trying to set shutdownFlag and close the socket.
+ rwLock.AcquireReaderLock(-1);
+
+ if (!shutdownFlag)
+ {
+ // increment the count of pending operations
+ Interlocked.Increment(ref rwOperationCount);
+
+ // allocate a packet buffer
+ //WrappedObject wrappedBuffer = Pool.CheckOut();
+ UDPPacketBuffer buf = new UDPPacketBuffer();
+
+ try
+ {
+ // kick off an async read
+ udpSocket.BeginReceiveFrom(
+ //wrappedBuffer.Instance.Data,
+ buf.Data,
+ 0,
+ UDPPacketBuffer.BUFFER_SIZE,
+ SocketFlags.None,
+ //ref wrappedBuffer.Instance.RemoteEndPoint,
+ ref buf.RemoteEndPoint,
+ new AsyncCallback(AsyncEndReceive),
+ //wrappedBuffer);
+ buf);
+ }
+ catch (SocketException)
+ {
+ // something bad happened
+ //Logger.Log(
+ // "A SocketException occurred in UDPServer.AsyncBeginReceive()",
+ // Helpers.LogLevel.Error, se);
+
+ // an error occurred, therefore the operation is void. Decrement the reference count.
+ Interlocked.Decrement(ref rwOperationCount);
+ }
+ }
+
+ // we're done with the socket for now, release the reader lock.
+ rwLock.ReleaseReaderLock();
+ }
+
+ private void AsyncEndReceive(IAsyncResult iar)
+ {
+ // Asynchronous receive operations will complete here through the call
+ // to AsyncBeginReceive
+
+ // aquire a reader lock
+ rwLock.AcquireReaderLock(-1);
+
+ if (!shutdownFlag)
+ {
+ // get the buffer that was created in AsyncBeginReceive
+ // this is the received data
+ //WrappedObject wrappedBuffer = (WrappedObject)iar.AsyncState;
+ //UDPPacketBuffer buffer = wrappedBuffer.Instance;
+ UDPPacketBuffer buffer = (UDPPacketBuffer)iar.AsyncState;
+
+ try
+ {
+ // get the length of data actually read from the socket, store it with the
+ // buffer
+ buffer.DataLength = udpSocket.EndReceiveFrom(iar, ref buffer.RemoteEndPoint);
+
+ // this operation is now complete, decrement the reference count
+ Interlocked.Decrement(ref rwOperationCount);
+
+ // we're done with the socket, release the reader lock
+ rwLock.ReleaseReaderLock();
+
+ // call the abstract method PacketReceived(), passing the buffer that
+ // has just been filled from the socket read.
+ PacketReceived(buffer);
+ }
+ catch (SocketException)
+ {
+ // an error occurred, therefore the operation is void. Decrement the reference count.
+ Interlocked.Decrement(ref rwOperationCount);
+
+ // we're done with the socket for now, release the reader lock.
+ rwLock.ReleaseReaderLock();
+ }
+ finally
+ {
+ // start another receive - this keeps the server going!
+ AsyncBeginReceive();
+
+ //wrappedBuffer.Dispose();
+ }
+ }
+ else
+ {
+ // nothing bad happened, but we are done with the operation
+ // decrement the reference count and release the reader lock
+ Interlocked.Decrement(ref rwOperationCount);
+ rwLock.ReleaseReaderLock();
+ }
+ }
+
+ public void AsyncBeginSend(UDPPacketBuffer buf)
+ {
+ rwLock.AcquireReaderLock(-1);
+
+ if (!shutdownFlag)
+ {
+ try
+ {
+ Interlocked.Increment(ref rwOperationCount);
+ udpSocket.BeginSendTo(
+ buf.Data,
+ 0,
+ buf.DataLength,
+ SocketFlags.None,
+ buf.RemoteEndPoint,
+ new AsyncCallback(AsyncEndSend),
+ buf);
+ }
+ catch (SocketException)
+ {
+ //Logger.Log(
+ // "A SocketException occurred in UDPServer.AsyncBeginSend()",
+ // Helpers.LogLevel.Error, se);
+ }
+ }
+
+ rwLock.ReleaseReaderLock();
+ }
+
+ private void AsyncEndSend(IAsyncResult iar)
+ {
+ rwLock.AcquireReaderLock(-1);
+
+ if (!shutdownFlag)
+ {
+ UDPPacketBuffer buffer = (UDPPacketBuffer)iar.AsyncState;
+
+ try
+ {
+ int bytesSent = udpSocket.EndSendTo(iar);
+
+ // note that call to the abstract PacketSent() method - we are passing the number
+ // of bytes sent in a separate parameter, since we can't use buffer.DataLength which
+ // is the number of bytes to send (or bytes received depending upon whether this
+ // buffer was part of a send or a receive).
+ PacketSent(buffer, bytesSent);
+ }
+ catch (SocketException)
+ {
+ //Logger.Log(
+ // "A SocketException occurred in UDPServer.AsyncEndSend()",
+ // Helpers.LogLevel.Error, se);
+ }
+ }
+
+ Interlocked.Decrement(ref rwOperationCount);
+ rwLock.ReleaseReaderLock();
+ }
+ }
+}
--
cgit v1.1