From 7c3e5afc0c983e490401253e16c49ff401e61b65 Mon Sep 17 00:00:00 2001 From: unknown Date: Mon, 5 Oct 2009 17:04:36 +0100 Subject: MSSQL changes for Grid server in ROBUST plus some code tweaks 'n tidy up --- OpenSim/Data/MSSQL/MSSQLLegacyRegionData.cs | 1531 +++++++++++++++++++++++++++ 1 file changed, 1531 insertions(+) create mode 100644 OpenSim/Data/MSSQL/MSSQLLegacyRegionData.cs (limited to 'OpenSim/Data/MSSQL/MSSQLLegacyRegionData.cs') diff --git a/OpenSim/Data/MSSQL/MSSQLLegacyRegionData.cs b/OpenSim/Data/MSSQL/MSSQLLegacyRegionData.cs new file mode 100644 index 0000000..adedcce --- /dev/null +++ b/OpenSim/Data/MSSQL/MSSQLLegacyRegionData.cs @@ -0,0 +1,1531 @@ +/* + * Copyright (c) Contributors, http://opensimulator.org/ + * See CONTRIBUTORS.TXT for a full list of copyright holders. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of the OpenSimulator Project nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +using System; +using System.Collections.Generic; +using System.Data; +using System.Data.SqlClient; +using System.Drawing; +using System.IO; +using System.Reflection; +using log4net; +using OpenMetaverse; +using OpenSim.Framework; +using OpenSim.Region.Framework.Interfaces; +using OpenSim.Region.Framework.Scenes; + +namespace OpenSim.Data.MSSQL +{ + /// + /// A MSSQL Interface for the Region Server. + /// + public class MSSQLRegionDataStore : IRegionDataStore + { + private const string _migrationStore = "RegionStore"; + + // private static FileSystemDataStore Instance = new FileSystemDataStore(); + private static readonly ILog _Log = LogManager.GetLogger(MethodBase.GetCurrentMethod().DeclaringType); + + /// + /// The database manager + /// + private MSSQLManager _Database; + + /// + /// Initialises the region datastore + /// + /// The connection string. + public void Initialise(string connectionString) + { + if (!string.IsNullOrEmpty(connectionString)) + { + _Database = new MSSQLManager(connectionString); + } + else + { + IniFile iniFile = new IniFile("mssql_connection.ini"); + string settingDataSource = iniFile.ParseFileReadValue("data_source"); + string settingInitialCatalog = iniFile.ParseFileReadValue("initial_catalog"); + string settingPersistSecurityInfo = iniFile.ParseFileReadValue("persist_security_info"); + string settingUserId = iniFile.ParseFileReadValue("user_id"); + string settingPassword = iniFile.ParseFileReadValue("password"); + + _Database = new MSSQLManager(settingDataSource, settingInitialCatalog, settingPersistSecurityInfo, settingUserId, settingPassword); + } + + //Migration settings + _Database.CheckMigration(_migrationStore); + } + + /// + /// Dispose the database + /// + public void Dispose() { } + + #region SceneObjectGroup region for loading and Store of the scene. + + /// + /// Loads the objects present in the region. + /// + /// The region UUID. + /// + public List LoadObjects(UUID regionUUID) + { + UUID lastGroupID = UUID.Zero; + + Dictionary prims = new Dictionary(); + Dictionary objects = new Dictionary(); + SceneObjectGroup grp = null; + + + string query = "SELECT *, " + + "sort = CASE WHEN prims.UUID = prims.SceneGroupID THEN 0 ELSE 1 END " + + "FROM prims " + + "LEFT JOIN primshapes ON prims.UUID = primshapes.UUID " + + "WHERE RegionUUID = @RegionUUID " + + "ORDER BY SceneGroupID asc, sort asc, LinkNumber asc"; + + using (AutoClosingSqlCommand command = _Database.Query(query)) + { + command.Parameters.Add(_Database.CreateParameter("@regionUUID", regionUUID)); + + using (SqlDataReader reader = command.ExecuteReader()) + { + while (reader.Read()) + { + SceneObjectPart sceneObjectPart = BuildPrim(reader); + if (reader["Shape"] is DBNull) + sceneObjectPart.Shape = PrimitiveBaseShape.Default; + else + sceneObjectPart.Shape = BuildShape(reader); + + prims[sceneObjectPart.UUID] = sceneObjectPart; + + UUID groupID = new UUID((Guid)reader["SceneGroupID"]); + + if (groupID != lastGroupID) // New SOG + { + if (grp != null) + objects[grp.UUID] = grp; + + lastGroupID = groupID; + + // There sometimes exist OpenSim bugs that 'orphan groups' so that none of the prims are + // recorded as the root prim (for which the UUID must equal the persisted group UUID). In + // this case, force the UUID to be the same as the group UUID so that at least these can be + // deleted (we need to change the UUID so that any other prims in the linkset can also be + // deleted). + if (sceneObjectPart.UUID != groupID && groupID != UUID.Zero) + { + _Log.WarnFormat( + "[REGION DB]: Found root prim {0} {1} at {2} where group was actually {3}. Forcing UUID to group UUID", + sceneObjectPart.Name, sceneObjectPart.UUID, sceneObjectPart.GroupPosition, groupID); + + sceneObjectPart.UUID = groupID; + } + + grp = new SceneObjectGroup(sceneObjectPart); + } + else + { + // Black magic to preserve link numbers + // Why is this needed, fix this in AddPart method. + int link = sceneObjectPart.LinkNum; + + grp.AddPart(sceneObjectPart); + + if (link != 0) + sceneObjectPart.LinkNum = link; + } + } + } + } + + if (grp != null) + objects[grp.UUID] = grp; + + // Instead of attempting to LoadItems on every prim, + // most of which probably have no items... get a + // list from DB of all prims which have items and + // LoadItems only on those + List primsWithInventory = new List(); + string qry = "select distinct primID from primitems"; + using (AutoClosingSqlCommand command = _Database.Query(qry)) + { + using (SqlDataReader itemReader = command.ExecuteReader()) + { + while (itemReader.Read()) + { + if (!(itemReader["primID"] is DBNull)) + { + UUID primID = new UUID(itemReader["primID"].ToString()); + if (prims.ContainsKey(primID)) + { + primsWithInventory.Add(prims[primID]); + } + } + } + } + } + + LoadItems(primsWithInventory); + + _Log.DebugFormat("[REGION DB]: Loaded {0} objects using {1} prims", objects.Count, prims.Count); + + return new List(objects.Values); + } + + /// + /// Load in the prim's persisted inventory. + /// + /// all prims with inventory on a region + private void LoadItems(List allPrimsWithInventory) + { + + using (AutoClosingSqlCommand command = _Database.Query("SELECT * FROM primitems WHERE PrimID = @PrimID")) + { + foreach (SceneObjectPart objectPart in allPrimsWithInventory) + { + command.Parameters.Clear(); + command.Parameters.Add(_Database.CreateParameter("@PrimID", objectPart.UUID)); + + List inventory = new List(); + + using (SqlDataReader reader = command.ExecuteReader()) + { + while (reader.Read()) + { + TaskInventoryItem item = BuildItem(reader); + + item.ParentID = objectPart.UUID; // Values in database are + // often wrong + inventory.Add(item); + } + } + + objectPart.Inventory.RestoreInventoryItems(inventory); + } + } + } + + /// + /// Stores all object's details apart from inventory + /// + /// + /// + public void StoreObject(SceneObjectGroup obj, UUID regionUUID) + { + _Log.InfoFormat("[MSSQL]: Adding/Changing SceneObjectGroup: {0} to region: {1}, object has {2} prims.", obj.UUID, regionUUID, obj.Children.Count); + + using (SqlConnection conn = _Database.DatabaseConnection()) + { + SqlTransaction transaction = conn.BeginTransaction(); + + try + { + foreach (SceneObjectPart sceneObjectPart in obj.Children.Values) + { + //Update prim + using (SqlCommand sqlCommand = conn.CreateCommand()) + { + sqlCommand.Transaction = transaction; + try + { + StoreSceneObjectPrim(sceneObjectPart, sqlCommand, obj.UUID, regionUUID); + } + catch (SqlException sqlEx) + { + _Log.ErrorFormat("[REGION DB]: Store SceneObjectPrim SQL error: {0} at line {1}", sqlEx.Message, sqlEx.LineNumber); + throw; + } + } + + //Update primshapes + using (SqlCommand sqlCommand = conn.CreateCommand()) + { + sqlCommand.Transaction = transaction; + try + { + StoreSceneObjectPrimShapes(sceneObjectPart, sqlCommand, obj.UUID, regionUUID); + } + catch (SqlException sqlEx) + { + _Log.ErrorFormat("[REGION DB]: Store SceneObjectPrimShapes SQL error: {0} at line {1}", sqlEx.Message, sqlEx.LineNumber); + throw; + } + } + } + + transaction.Commit(); + } + catch (Exception ex) + { + _Log.ErrorFormat("[REGION DB]: Store SceneObjectGroup error: {0}, Rolling back...", ex.Message); + try + { + transaction.Rollback(); + } + catch (Exception ex2) + { + //Show error + _Log.InfoFormat("[REGION DB]: Rollback of SceneObjectGroup store transaction failed with error: {0}", ex2.Message); + + } + } + } + + } + + /// + /// Stores the prim of the sceneobjectpart. + /// + /// The sceneobjectpart or prim. + /// The SQL command with the transaction. + /// The scenegroup UUID. + /// The region UUID. + private void StoreSceneObjectPrim(SceneObjectPart sceneObjectPart, SqlCommand sqlCommand, UUID sceneGroupID, UUID regionUUID) + { + //Big query to update or insert a new prim. + //Note for SQL Server 2008 this could be simplified + string queryPrims = @" +IF EXISTS (SELECT UUID FROM prims WHERE UUID = @UUID) + BEGIN + UPDATE prims SET + CreationDate = @CreationDate, Name = @Name, Text = @Text, Description = @Description, SitName = @SitName, + TouchName = @TouchName, ObjectFlags = @ObjectFlags, OwnerMask = @OwnerMask, NextOwnerMask = @NextOwnerMask, GroupMask = @GroupMask, + EveryoneMask = @EveryoneMask, BaseMask = @BaseMask, PositionX = @PositionX, PositionY = @PositionY, PositionZ = @PositionZ, + GroupPositionX = @GroupPositionX, GroupPositionY = @GroupPositionY, GroupPositionZ = @GroupPositionZ, VelocityX = @VelocityX, + VelocityY = @VelocityY, VelocityZ = @VelocityZ, AngularVelocityX = @AngularVelocityX, AngularVelocityY = @AngularVelocityY, + AngularVelocityZ = @AngularVelocityZ, AccelerationX = @AccelerationX, AccelerationY = @AccelerationY, + AccelerationZ = @AccelerationZ, RotationX = @RotationX, RotationY = @RotationY, RotationZ = @RotationZ, RotationW = @RotationW, + SitTargetOffsetX = @SitTargetOffsetX, SitTargetOffsetY = @SitTargetOffsetY, SitTargetOffsetZ = @SitTargetOffsetZ, + SitTargetOrientW = @SitTargetOrientW, SitTargetOrientX = @SitTargetOrientX, SitTargetOrientY = @SitTargetOrientY, + SitTargetOrientZ = @SitTargetOrientZ, RegionUUID = @RegionUUID, CreatorID = @CreatorID, OwnerID = @OwnerID, GroupID = @GroupID, + LastOwnerID = @LastOwnerID, SceneGroupID = @SceneGroupID, PayPrice = @PayPrice, PayButton1 = @PayButton1, PayButton2 = @PayButton2, + PayButton3 = @PayButton3, PayButton4 = @PayButton4, LoopedSound = @LoopedSound, LoopedSoundGain = @LoopedSoundGain, + TextureAnimation = @TextureAnimation, OmegaX = @OmegaX, OmegaY = @OmegaY, OmegaZ = @OmegaZ, CameraEyeOffsetX = @CameraEyeOffsetX, + CameraEyeOffsetY = @CameraEyeOffsetY, CameraEyeOffsetZ = @CameraEyeOffsetZ, CameraAtOffsetX = @CameraAtOffsetX, + CameraAtOffsetY = @CameraAtOffsetY, CameraAtOffsetZ = @CameraAtOffsetZ, ForceMouselook = @ForceMouselook, + ScriptAccessPin = @ScriptAccessPin, AllowedDrop = @AllowedDrop, DieAtEdge = @DieAtEdge, SalePrice = @SalePrice, + SaleType = @SaleType, ColorR = @ColorR, ColorG = @ColorG, ColorB = @ColorB, ColorA = @ColorA, ParticleSystem = @ParticleSystem, + ClickAction = @ClickAction, Material = @Material, CollisionSound = @CollisionSound, CollisionSoundVolume = @CollisionSoundVolume, PassTouches = @PassTouches, + LinkNumber = @LinkNumber + WHERE UUID = @UUID + END +ELSE + BEGIN + INSERT INTO + prims ( + UUID, CreationDate, Name, Text, Description, SitName, TouchName, ObjectFlags, OwnerMask, NextOwnerMask, GroupMask, + EveryoneMask, BaseMask, PositionX, PositionY, PositionZ, GroupPositionX, GroupPositionY, GroupPositionZ, VelocityX, + VelocityY, VelocityZ, AngularVelocityX, AngularVelocityY, AngularVelocityZ, AccelerationX, AccelerationY, AccelerationZ, + RotationX, RotationY, RotationZ, RotationW, SitTargetOffsetX, SitTargetOffsetY, SitTargetOffsetZ, SitTargetOrientW, + SitTargetOrientX, SitTargetOrientY, SitTargetOrientZ, RegionUUID, CreatorID, OwnerID, GroupID, LastOwnerID, SceneGroupID, + PayPrice, PayButton1, PayButton2, PayButton3, PayButton4, LoopedSound, LoopedSoundGain, TextureAnimation, OmegaX, + OmegaY, OmegaZ, CameraEyeOffsetX, CameraEyeOffsetY, CameraEyeOffsetZ, CameraAtOffsetX, CameraAtOffsetY, CameraAtOffsetZ, + ForceMouselook, ScriptAccessPin, AllowedDrop, DieAtEdge, SalePrice, SaleType, ColorR, ColorG, ColorB, ColorA, + ParticleSystem, ClickAction, Material, CollisionSound, CollisionSoundVolume, PassTouches, LinkNumber + ) VALUES ( + @UUID, @CreationDate, @Name, @Text, @Description, @SitName, @TouchName, @ObjectFlags, @OwnerMask, @NextOwnerMask, @GroupMask, + @EveryoneMask, @BaseMask, @PositionX, @PositionY, @PositionZ, @GroupPositionX, @GroupPositionY, @GroupPositionZ, @VelocityX, + @VelocityY, @VelocityZ, @AngularVelocityX, @AngularVelocityY, @AngularVelocityZ, @AccelerationX, @AccelerationY, @AccelerationZ, + @RotationX, @RotationY, @RotationZ, @RotationW, @SitTargetOffsetX, @SitTargetOffsetY, @SitTargetOffsetZ, @SitTargetOrientW, + @SitTargetOrientX, @SitTargetOrientY, @SitTargetOrientZ, @RegionUUID, @CreatorID, @OwnerID, @GroupID, @LastOwnerID, @SceneGroupID, + @PayPrice, @PayButton1, @PayButton2, @PayButton3, @PayButton4, @LoopedSound, @LoopedSoundGain, @TextureAnimation, @OmegaX, + @OmegaY, @OmegaZ, @CameraEyeOffsetX, @CameraEyeOffsetY, @CameraEyeOffsetZ, @CameraAtOffsetX, @CameraAtOffsetY, @CameraAtOffsetZ, + @ForceMouselook, @ScriptAccessPin, @AllowedDrop, @DieAtEdge, @SalePrice, @SaleType, @ColorR, @ColorG, @ColorB, @ColorA, + @ParticleSystem, @ClickAction, @Material, @CollisionSound, @CollisionSoundVolume, @PassTouches, @LinkNumber + ) + END"; + + //Set commandtext. + sqlCommand.CommandText = queryPrims; + //Add parameters + sqlCommand.Parameters.AddRange(CreatePrimParameters(sceneObjectPart, sceneGroupID, regionUUID)); + + //Execute the query. If it fails then error is trapped in calling function + sqlCommand.ExecuteNonQuery(); + } + + /// + /// Stores the scene object prim shapes. + /// + /// The sceneobjectpart containing prim shape. + /// The SQL command with the transaction. + /// The scenegroup UUID. + /// The region UUID. + private void StoreSceneObjectPrimShapes(SceneObjectPart sceneObjectPart, SqlCommand sqlCommand, UUID sceneGroupID, UUID regionUUID) + { + //Big query to or insert or update primshapes + //Note for SQL Server 2008 this can be simplified + string queryPrimShapes = @" +IF EXISTS (SELECT UUID FROM primshapes WHERE UUID = @UUID) + BEGIN + UPDATE primshapes SET + Shape = @Shape, ScaleX = @ScaleX, ScaleY = @ScaleY, ScaleZ = @ScaleZ, PCode = @PCode, PathBegin = @PathBegin, + PathEnd = @PathEnd, PathScaleX = @PathScaleX, PathScaleY = @PathScaleY, PathShearX = @PathShearX, PathShearY = @PathShearY, + PathSkew = @PathSkew, PathCurve = @PathCurve, PathRadiusOffset = @PathRadiusOffset, PathRevolutions = @PathRevolutions, + PathTaperX = @PathTaperX, PathTaperY = @PathTaperY, PathTwist = @PathTwist, PathTwistBegin = @PathTwistBegin, + ProfileBegin = @ProfileBegin, ProfileEnd = @ProfileEnd, ProfileCurve = @ProfileCurve, ProfileHollow = @ProfileHollow, + Texture = @Texture, ExtraParams = @ExtraParams, State = @State + WHERE UUID = @UUID + END +ELSE + BEGIN + INSERT INTO + primshapes ( + UUID, Shape, ScaleX, ScaleY, ScaleZ, PCode, PathBegin, PathEnd, PathScaleX, PathScaleY, PathShearX, PathShearY, + PathSkew, PathCurve, PathRadiusOffset, PathRevolutions, PathTaperX, PathTaperY, PathTwist, PathTwistBegin, ProfileBegin, + ProfileEnd, ProfileCurve, ProfileHollow, Texture, ExtraParams, State + ) VALUES ( + @UUID, @Shape, @ScaleX, @ScaleY, @ScaleZ, @PCode, @PathBegin, @PathEnd, @PathScaleX, @PathScaleY, @PathShearX, @PathShearY, + @PathSkew, @PathCurve, @PathRadiusOffset, @PathRevolutions, @PathTaperX, @PathTaperY, @PathTwist, @PathTwistBegin, @ProfileBegin, + @ProfileEnd, @ProfileCurve, @ProfileHollow, @Texture, @ExtraParams, @State + ) + END"; + + //Set commandtext. + sqlCommand.CommandText = queryPrimShapes; + + //Add parameters + sqlCommand.Parameters.AddRange(CreatePrimShapeParameters(sceneObjectPart, sceneGroupID, regionUUID)); + + //Execute the query. If it fails then error is trapped in calling function + sqlCommand.ExecuteNonQuery(); + + } + + /// + /// Removes a object from the database. + /// Meaning removing it from tables Prims, PrimShapes and PrimItems + /// + /// id of scenegroup + /// regionUUID (is this used anyway + public void RemoveObject(UUID objectID, UUID regionUUID) + { + _Log.InfoFormat("[MSSQL]: Removing obj: {0} from region: {1}", objectID, regionUUID); + + //Remove from prims and primsitem table + string sqlPrims = "DELETE FROM PRIMS WHERE SceneGroupID = @objectID"; + string sqlPrimItems = "DELETE FROM PRIMITEMS WHERE primID in (SELECT UUID FROM PRIMS WHERE SceneGroupID = @objectID)"; + string sqlPrimShapes = "DELETE FROM PRIMSHAPES WHERE uuid in (SELECT UUID FROM PRIMS WHERE SceneGroupID = @objectID)"; + + lock (_Database) + { + //Using the non transaction mode. + using (AutoClosingSqlCommand cmd = _Database.Query(sqlPrimShapes)) + { + cmd.Parameters.Add(_Database.CreateParameter("objectID", objectID)); + cmd.ExecuteNonQuery(); + + cmd.CommandText = sqlPrimItems; + cmd.ExecuteNonQuery(); + + cmd.CommandText = sqlPrims; + cmd.ExecuteNonQuery(); + } + } + } + + /// + /// Store the inventory of a prim. Warning deletes everything first and then adds all again. + /// + /// + /// + public void StorePrimInventory(UUID primID, ICollection items) + { + //_Log.InfoFormat("[REGION DB: Persisting Prim Inventory with prim ID {0}", primID); + + //Statement from MySQL section! + // For now, we're just going to crudely remove all the previous inventory items + // no matter whether they have changed or not, and replace them with the current set. + + //Delete everything from PrimID + //TODO add index on PrimID in DB, if not already exist + using (AutoClosingSqlCommand cmd = _Database.Query("DELETE PRIMITEMS WHERE primID = @primID")) + { + cmd.Parameters.Add(_Database.CreateParameter("@primID", primID)); + cmd.ExecuteNonQuery(); + } + + string sql = + @"INSERT INTO primitems ( + itemID,primID,assetID,parentFolderID,invType,assetType,name,description,creationDate,creatorID,ownerID,lastOwnerID,groupID, + nextPermissions,currentPermissions,basePermissions,everyonePermissions,groupPermissions,flags) + VALUES (@itemID,@primID,@assetID,@parentFolderID,@invType,@assetType,@name,@description,@creationDate,@creatorID,@ownerID, + @lastOwnerID,@groupID,@nextPermissions,@currentPermissions,@basePermissions,@everyonePermissions,@groupPermissions,@flags)"; + + using (AutoClosingSqlCommand cmd = _Database.Query(sql)) + { + foreach (TaskInventoryItem taskItem in items) + { + cmd.Parameters.AddRange(CreatePrimInventoryParameters(taskItem)); + cmd.ExecuteNonQuery(); + + cmd.Parameters.Clear(); + } + } + } + + #endregion + + /// + /// Loads the terrain map. + /// + /// regionID. + /// + public double[,] LoadTerrain(UUID regionID) + { + double[,] terrain = new double[(int)Constants.RegionSize, (int)Constants.RegionSize]; + terrain.Initialize(); + + string sql = "select top 1 RegionUUID, Revision, Heightfield from terrain where RegionUUID = @RegionUUID order by Revision desc"; + + using (AutoClosingSqlCommand cmd = _Database.Query(sql)) + { + // MySqlParameter param = new MySqlParameter(); + cmd.Parameters.Add(_Database.CreateParameter("@RegionUUID", regionID)); + + using (SqlDataReader reader = cmd.ExecuteReader()) + { + int rev; + if (reader.Read()) + { + MemoryStream str = new MemoryStream((byte[])reader["Heightfield"]); + BinaryReader br = new BinaryReader(str); + for (int x = 0; x < (int)Constants.RegionSize; x++) + { + for (int y = 0; y < (int)Constants.RegionSize; y++) + { + terrain[x, y] = br.ReadDouble(); + } + } + rev = (int)reader["Revision"]; + } + else + { + _Log.Info("[REGION DB]: No terrain found for region"); + return null; + } + _Log.Info("[REGION DB]: Loaded terrain revision r" + rev); + } + } + + return terrain; + } + + /// + /// Stores the terrain map to DB. + /// + /// terrain map data. + /// regionID. + public void StoreTerrain(double[,] terrain, UUID regionID) + { + int revision = Util.UnixTimeSinceEpoch(); + + //Delete old terrain map + string sql = "delete from terrain where RegionUUID=@RegionUUID"; + using (AutoClosingSqlCommand cmd = _Database.Query(sql)) + { + cmd.Parameters.Add(_Database.CreateParameter("@RegionUUID", regionID)); + cmd.ExecuteNonQuery(); + } + + sql = "insert into terrain(RegionUUID, Revision, Heightfield) values(@RegionUUID, @Revision, @Heightfield)"; + + using (AutoClosingSqlCommand cmd = _Database.Query(sql)) + { + cmd.Parameters.Add(_Database.CreateParameter("@RegionUUID", regionID)); + cmd.Parameters.Add(_Database.CreateParameter("@Revision", revision)); + cmd.Parameters.Add(_Database.CreateParameter("@Heightfield", serializeTerrain(terrain))); + cmd.ExecuteNonQuery(); + } + + _Log.Info("[REGION DB]: Stored terrain revision r " + revision); + } + + /// + /// Loads all the land objects of a region. + /// + /// The region UUID. + /// + public List LoadLandObjects(UUID regionUUID) + { + List landDataForRegion = new List(); + + string sql = "select * from land where RegionUUID = @RegionUUID"; + + //Retrieve all land data from region + using (AutoClosingSqlCommand cmdLandData = _Database.Query(sql)) + { + cmdLandData.Parameters.Add(_Database.CreateParameter("@RegionUUID", regionUUID)); + + using (SqlDataReader readerLandData = cmdLandData.ExecuteReader()) + { + while (readerLandData.Read()) + { + landDataForRegion.Add(BuildLandData(readerLandData)); + } + } + } + + //Retrieve all accesslist data for all landdata + foreach (LandData landData in landDataForRegion) + { + sql = "select * from landaccesslist where LandUUID = @LandUUID"; + using (AutoClosingSqlCommand cmdAccessList = _Database.Query(sql)) + { + cmdAccessList.Parameters.Add(_Database.CreateParameter("@LandUUID", landData.GlobalID)); + using (SqlDataReader readerAccessList = cmdAccessList.ExecuteReader()) + { + while (readerAccessList.Read()) + { + landData.ParcelAccessList.Add(BuildLandAccessData(readerAccessList)); + } + } + } + } + + //Return data + return landDataForRegion; + } + + /// + /// Stores land object with landaccess list. + /// + /// parcel data. + public void StoreLandObject(ILandObject parcel) + { + //As this is only one record in land table I just delete all and then add a new record. + //As the delete landaccess is already in the mysql code + + //Delete old values + RemoveLandObject(parcel.landData.GlobalID); + + //Insert new values + string sql = @"INSERT INTO [land] +([UUID],[RegionUUID],[LocalLandID],[Bitmap],[Name],[Description],[OwnerUUID],[IsGroupOwned],[Area],[AuctionID],[Category],[ClaimDate],[ClaimPrice],[GroupUUID],[SalePrice],[LandStatus],[LandFlags],[LandingType],[MediaAutoScale],[MediaTextureUUID],[MediaURL],[MusicURL],[PassHours],[PassPrice],[SnapshotUUID],[UserLocationX],[UserLocationY],[UserLocationZ],[UserLookAtX],[UserLookAtY],[UserLookAtZ],[AuthbuyerID],[OtherCleanTime],[Dwell]) +VALUES +(@UUID,@RegionUUID,@LocalLandID,@Bitmap,@Name,@Description,@OwnerUUID,@IsGroupOwned,@Area,@AuctionID,@Category,@ClaimDate,@ClaimPrice,@GroupUUID,@SalePrice,@LandStatus,@LandFlags,@LandingType,@MediaAutoScale,@MediaTextureUUID,@MediaURL,@MusicURL,@PassHours,@PassPrice,@SnapshotUUID,@UserLocationX,@UserLocationY,@UserLocationZ,@UserLookAtX,@UserLookAtY,@UserLookAtZ,@AuthbuyerID,@OtherCleanTime,@Dwell)"; + + using (AutoClosingSqlCommand cmd = _Database.Query(sql)) + { + cmd.Parameters.AddRange(CreateLandParameters(parcel.landData, parcel.regionUUID)); + + cmd.ExecuteNonQuery(); + } + + sql = "INSERT INTO [landaccesslist] ([LandUUID],[AccessUUID],[Flags]) VALUES (@LandUUID,@AccessUUID,@Flags)"; + + using (AutoClosingSqlCommand cmd = _Database.Query(sql)) + { + foreach (ParcelManager.ParcelAccessEntry parcelAccessEntry in parcel.landData.ParcelAccessList) + { + cmd.Parameters.AddRange(CreateLandAccessParameters(parcelAccessEntry, parcel.regionUUID)); + + cmd.ExecuteNonQuery(); + cmd.Parameters.Clear(); + } + } + } + + /// + /// Removes a land object from DB. + /// + /// UUID of landobject + public void RemoveLandObject(UUID globalID) + { + using (AutoClosingSqlCommand cmd = _Database.Query("delete from land where UUID=@UUID")) + { + cmd.Parameters.Add(_Database.CreateParameter("@UUID", globalID)); + cmd.ExecuteNonQuery(); + } + + using (AutoClosingSqlCommand cmd = _Database.Query("delete from landaccesslist where LandUUID=@UUID")) + { + cmd.Parameters.Add(_Database.CreateParameter("@UUID", globalID)); + cmd.ExecuteNonQuery(); + } + } + + /// + /// Loads the settings of a region. + /// + /// The region UUID. + /// + public RegionSettings LoadRegionSettings(UUID regionUUID) + { + string sql = "select * from regionsettings where regionUUID = @regionUUID"; + RegionSettings regionSettings; + using (AutoClosingSqlCommand cmd = _Database.Query(sql)) + { + cmd.Parameters.Add(_Database.CreateParameter("@regionUUID", regionUUID)); + using (SqlDataReader reader = cmd.ExecuteReader()) + { + if (reader.Read()) + { + regionSettings = BuildRegionSettings(reader); + regionSettings.OnSave += StoreRegionSettings; + + return regionSettings; + } + } + } + + //If comes here then there is now region setting for that region + regionSettings = new RegionSettings(); + regionSettings.RegionUUID = regionUUID; + regionSettings.OnSave += StoreRegionSettings; + + //Store new values + StoreNewRegionSettings(regionSettings); + + return regionSettings; + } + + /// + /// Store region settings, need to check if the check is really necesary. If we can make something for creating new region. + /// + /// region settings. + public void StoreRegionSettings(RegionSettings regionSettings) + { + //Little check if regionUUID already exist in DB + string regionUUID; + using (AutoClosingSqlCommand cmd = _Database.Query("SELECT regionUUID FROM regionsettings WHERE regionUUID = @regionUUID")) + { + cmd.Parameters.Add(_Database.CreateParameter("@regionUUID", regionSettings.RegionUUID)); + regionUUID = cmd.ExecuteScalar().ToString(); + } + + if (string.IsNullOrEmpty(regionUUID)) + { + StoreNewRegionSettings(regionSettings); + } + else + { + //This method only updates region settings!!! First call LoadRegionSettings to create new region settings in DB + string sql = + @"UPDATE [regionsettings] SET [block_terraform] = @block_terraform ,[block_fly] = @block_fly ,[allow_damage] = @allow_damage +,[restrict_pushing] = @restrict_pushing ,[allow_land_resell] = @allow_land_resell ,[allow_land_join_divide] = @allow_land_join_divide +,[block_show_in_search] = @block_show_in_search ,[agent_limit] = @agent_limit ,[object_bonus] = @object_bonus ,[maturity] = @maturity +,[disable_scripts] = @disable_scripts ,[disable_collisions] = @disable_collisions ,[disable_physics] = @disable_physics +,[terrain_texture_1] = @terrain_texture_1 ,[terrain_texture_2] = @terrain_texture_2 ,[terrain_texture_3] = @terrain_texture_3 +,[terrain_texture_4] = @terrain_texture_4 ,[elevation_1_nw] = @elevation_1_nw ,[elevation_2_nw] = @elevation_2_nw +,[elevation_1_ne] = @elevation_1_ne ,[elevation_2_ne] = @elevation_2_ne ,[elevation_1_se] = @elevation_1_se ,[elevation_2_se] = @elevation_2_se +,[elevation_1_sw] = @elevation_1_sw ,[elevation_2_sw] = @elevation_2_sw ,[water_height] = @water_height ,[terrain_raise_limit] = @terrain_raise_limit +,[terrain_lower_limit] = @terrain_lower_limit ,[use_estate_sun] = @use_estate_sun ,[fixed_sun] = @fixed_sun ,[sun_position] = @sun_position +,[covenant] = @covenant , [sunvectorx] = @sunvectorx, [sunvectory] = @sunvectory, [sunvectorz] = @sunvectorz, [Sandbox] = @Sandbox, [loaded_creation_datetime] = @loaded_creation_datetime, [loaded_creation_id] = @loaded_creation_id + WHERE [regionUUID] = @regionUUID"; + + using (AutoClosingSqlCommand cmd = _Database.Query(sql)) + { + cmd.Parameters.AddRange(CreateRegionSettingParameters(regionSettings)); + + cmd.ExecuteNonQuery(); + } + } + } + + public void Shutdown() + { + //Not used?? + } + + #region Private Methods + + /// + /// Serializes the terrain data for storage in DB. + /// + /// terrain data + /// + private static Array serializeTerrain(double[,] val) + { + MemoryStream str = new MemoryStream(((int)Constants.RegionSize * (int)Constants.RegionSize) * sizeof(double)); + BinaryWriter bw = new BinaryWriter(str); + + // TODO: COMPATIBILITY - Add byte-order conversions + for (int x = 0; x < (int)Constants.RegionSize; x++) + for (int y = 0; y < (int)Constants.RegionSize; y++) + { + double height = val[x, y]; + if (height == 0.0) + height = double.Epsilon; + + bw.Write(height); + } + + return str.ToArray(); + } + + /// + /// Stores new regionsettings. + /// + /// The region settings. + private void StoreNewRegionSettings(RegionSettings regionSettings) + { + string sql = @"INSERT INTO [regionsettings] + ([regionUUID],[block_terraform],[block_fly],[allow_damage],[restrict_pushing],[allow_land_resell],[allow_land_join_divide], + [block_show_in_search],[agent_limit],[object_bonus],[maturity],[disable_scripts],[disable_collisions],[disable_physics], + [terrain_texture_1],[terrain_texture_2],[terrain_texture_3],[terrain_texture_4],[elevation_1_nw],[elevation_2_nw],[elevation_1_ne], + [elevation_2_ne],[elevation_1_se],[elevation_2_se],[elevation_1_sw],[elevation_2_sw],[water_height],[terrain_raise_limit], + [terrain_lower_limit],[use_estate_sun],[fixed_sun],[sun_position],[covenant],[sunvectorx], [sunvectory], [sunvectorz],[Sandbox], [loaded_creation_datetime], [loaded_creation_id] + ) + VALUES + (@regionUUID,@block_terraform,@block_fly,@allow_damage,@restrict_pushing,@allow_land_resell,@allow_land_join_divide, + @block_show_in_search,@agent_limit,@object_bonus,@maturity,@disable_scripts,@disable_collisions,@disable_physics, + @terrain_texture_1,@terrain_texture_2,@terrain_texture_3,@terrain_texture_4,@elevation_1_nw,@elevation_2_nw,@elevation_1_ne, + @elevation_2_ne,@elevation_1_se,@elevation_2_se,@elevation_1_sw,@elevation_2_sw,@water_height,@terrain_raise_limit, + @terrain_lower_limit,@use_estate_sun,@fixed_sun,@sun_position,@covenant,@sunvectorx,@sunvectory, @sunvectorz, @Sandbox, @loaded_creation_datetime, @loaded_creation_id)"; + + using (AutoClosingSqlCommand cmd = _Database.Query(sql)) + { + cmd.Parameters.AddRange(CreateRegionSettingParameters(regionSettings)); + cmd.ExecuteNonQuery(); + } + } + + #region Private DataRecord conversion methods + + /// + /// Builds the region settings from a datarecod. + /// + /// datarecord with regionsettings. + /// + private static RegionSettings BuildRegionSettings(IDataRecord row) + { + //TODO change this is some more generic code so we doesnt have to change it every time a new field is added? + RegionSettings newSettings = new RegionSettings(); + + newSettings.RegionUUID = new UUID((Guid)row["regionUUID"]); + newSettings.BlockTerraform = Convert.ToBoolean(row["block_terraform"]); + newSettings.AllowDamage = Convert.ToBoolean(row["allow_damage"]); + newSettings.BlockFly = Convert.ToBoolean(row["block_fly"]); + newSettings.RestrictPushing = Convert.ToBoolean(row["restrict_pushing"]); + newSettings.AllowLandResell = Convert.ToBoolean(row["allow_land_resell"]); + newSettings.AllowLandJoinDivide = Convert.ToBoolean(row["allow_land_join_divide"]); + newSettings.BlockShowInSearch = Convert.ToBoolean(row["block_show_in_search"]); + newSettings.AgentLimit = Convert.ToInt32(row["agent_limit"]); + newSettings.ObjectBonus = Convert.ToDouble(row["object_bonus"]); + newSettings.Maturity = Convert.ToInt32(row["maturity"]); + newSettings.DisableScripts = Convert.ToBoolean(row["disable_scripts"]); + newSettings.DisableCollisions = Convert.ToBoolean(row["disable_collisions"]); + newSettings.DisablePhysics = Convert.ToBoolean(row["disable_physics"]); + newSettings.TerrainTexture1 = new UUID((Guid)row["terrain_texture_1"]); + newSettings.TerrainTexture2 = new UUID((Guid)row["terrain_texture_2"]); + newSettings.TerrainTexture3 = new UUID((Guid)row["terrain_texture_3"]); + newSettings.TerrainTexture4 = new UUID((Guid)row["terrain_texture_4"]); + newSettings.Elevation1NW = Convert.ToDouble(row["elevation_1_nw"]); + newSettings.Elevation2NW = Convert.ToDouble(row["elevation_2_nw"]); + newSettings.Elevation1NE = Convert.ToDouble(row["elevation_1_ne"]); + newSettings.Elevation2NE = Convert.ToDouble(row["elevation_2_ne"]); + newSettings.Elevation1SE = Convert.ToDouble(row["elevation_1_se"]); + newSettings.Elevation2SE = Convert.ToDouble(row["elevation_2_se"]); + newSettings.Elevation1SW = Convert.ToDouble(row["elevation_1_sw"]); + newSettings.Elevation2SW = Convert.ToDouble(row["elevation_2_sw"]); + newSettings.WaterHeight = Convert.ToDouble(row["water_height"]); + newSettings.TerrainRaiseLimit = Convert.ToDouble(row["terrain_raise_limit"]); + newSettings.TerrainLowerLimit = Convert.ToDouble(row["terrain_lower_limit"]); + newSettings.UseEstateSun = Convert.ToBoolean(row["use_estate_sun"]); + newSettings.Sandbox = Convert.ToBoolean(row["sandbox"]); + newSettings.FixedSun = Convert.ToBoolean(row["fixed_sun"]); + newSettings.SunPosition = Convert.ToDouble(row["sun_position"]); + newSettings.SunVector = new Vector3( + Convert.ToSingle(row["sunvectorx"]), + Convert.ToSingle(row["sunvectory"]), + Convert.ToSingle(row["sunvectorz"]) + ); + newSettings.Covenant = new UUID((Guid)row["covenant"]); + + newSettings.LoadedCreationDateTime = Convert.ToInt32(row["loaded_creation_datetime"]); + + if (row["loaded_creation_id"] is DBNull) + newSettings.LoadedCreationID = ""; + else + newSettings.LoadedCreationID = (String)row["loaded_creation_id"]; + return newSettings; + } + + /// + /// Builds the land data from a datarecord. + /// + /// datarecord with land data + /// + private static LandData BuildLandData(IDataRecord row) + { + LandData newData = new LandData(); + + newData.GlobalID = new UUID((Guid)row["UUID"]); + newData.LocalID = Convert.ToInt32(row["LocalLandID"]); + + // Bitmap is a byte[512] + newData.Bitmap = (Byte[])row["Bitmap"]; + + newData.Name = (string)row["Name"]; + newData.Description = (string)row["Description"]; + newData.OwnerID = new UUID((Guid)row["OwnerUUID"]); + newData.IsGroupOwned = Convert.ToBoolean(row["IsGroupOwned"]); + newData.Area = Convert.ToInt32(row["Area"]); + newData.AuctionID = Convert.ToUInt32(row["AuctionID"]); //Unemplemented + newData.Category = (ParcelCategory)Convert.ToInt32(row["Category"]); + //Enum libsecondlife.Parcel.ParcelCategory + newData.ClaimDate = Convert.ToInt32(row["ClaimDate"]); + newData.ClaimPrice = Convert.ToInt32(row["ClaimPrice"]); + newData.GroupID = new UUID((Guid)row["GroupUUID"]); + newData.SalePrice = Convert.ToInt32(row["SalePrice"]); + newData.Status = (ParcelStatus)Convert.ToInt32(row["LandStatus"]); + //Enum. libsecondlife.Parcel.ParcelStatus + newData.Flags = Convert.ToUInt32(row["LandFlags"]); + newData.LandingType = Convert.ToByte(row["LandingType"]); + newData.MediaAutoScale = Convert.ToByte(row["MediaAutoScale"]); + newData.MediaID = new UUID((Guid)row["MediaTextureUUID"]); + newData.MediaURL = (string)row["MediaURL"]; + newData.MusicURL = (string)row["MusicURL"]; + newData.PassHours = Convert.ToSingle(row["PassHours"]); + newData.PassPrice = Convert.ToInt32(row["PassPrice"]); + +// UUID authedbuyer; +// UUID snapshotID; +// +// if (UUID.TryParse((string)row["AuthBuyerID"], out authedbuyer)) +// newData.AuthBuyerID = authedbuyer; +// +// if (UUID.TryParse((string)row["SnapshotUUID"], out snapshotID)) +// newData.SnapshotID = snapshotID; + newData.AuthBuyerID = new UUID((Guid) row["AuthBuyerID"]); + newData.SnapshotID = new UUID((Guid)row["SnapshotUUID"]); + + newData.OtherCleanTime = Convert.ToInt32(row["OtherCleanTime"]); + newData.Dwell = Convert.ToInt32(row["Dwell"]); + + try + { + newData.UserLocation = + new Vector3(Convert.ToSingle(row["UserLocationX"]), Convert.ToSingle(row["UserLocationY"]), + Convert.ToSingle(row["UserLocationZ"])); + newData.UserLookAt = + new Vector3(Convert.ToSingle(row["UserLookAtX"]), Convert.ToSingle(row["UserLookAtY"]), + Convert.ToSingle(row["UserLookAtZ"])); + } + catch (InvalidCastException) + { + newData.UserLocation = Vector3.Zero; + newData.UserLookAt = Vector3.Zero; + _Log.ErrorFormat("[PARCEL]: unable to get parcel telehub settings for {1}", newData.Name); + } + + newData.ParcelAccessList = new List(); + + return newData; + } + + /// + /// Builds the landaccess data from a data record. + /// + /// datarecord with landaccess data + /// + private static ParcelManager.ParcelAccessEntry BuildLandAccessData(IDataRecord row) + { + ParcelManager.ParcelAccessEntry entry = new ParcelManager.ParcelAccessEntry(); + entry.AgentID = new UUID((Guid)row["AccessUUID"]); + entry.Flags = (AccessList)Convert.ToInt32(row["Flags"]); + entry.Time = new DateTime(); + return entry; + } + + /// + /// Builds the prim from a datarecord. + /// + /// datarecord + /// + private static SceneObjectPart BuildPrim(IDataRecord primRow) + { + SceneObjectPart prim = new SceneObjectPart(); + + prim.UUID = new UUID((Guid)primRow["UUID"]); + // explicit conversion of integers is required, which sort + // of sucks. No idea if there is a shortcut here or not. + prim.CreationDate = Convert.ToInt32(primRow["CreationDate"]); + prim.Name = (string)primRow["Name"]; + // various text fields + prim.Text = (string)primRow["Text"]; + prim.Color = Color.FromArgb(Convert.ToInt32(primRow["ColorA"]), + Convert.ToInt32(primRow["ColorR"]), + Convert.ToInt32(primRow["ColorG"]), + Convert.ToInt32(primRow["ColorB"])); + prim.Description = (string)primRow["Description"]; + prim.SitName = (string)primRow["SitName"]; + prim.TouchName = (string)primRow["TouchName"]; + // permissions + prim.ObjectFlags = Convert.ToUInt32(primRow["ObjectFlags"]); + prim.CreatorID = new UUID((Guid)primRow["CreatorID"]); + prim.OwnerID = new UUID((Guid)primRow["OwnerID"]); + prim.GroupID = new UUID((Guid)primRow["GroupID"]); + prim.LastOwnerID = new UUID((Guid)primRow["LastOwnerID"]); + prim.OwnerMask = Convert.ToUInt32(primRow["OwnerMask"]); + prim.NextOwnerMask = Convert.ToUInt32(primRow["NextOwnerMask"]); + prim.GroupMask = Convert.ToUInt32(primRow["GroupMask"]); + prim.EveryoneMask = Convert.ToUInt32(primRow["EveryoneMask"]); + prim.BaseMask = Convert.ToUInt32(primRow["BaseMask"]); + // vectors + prim.OffsetPosition = new Vector3( + Convert.ToSingle(primRow["PositionX"]), + Convert.ToSingle(primRow["PositionY"]), + Convert.ToSingle(primRow["PositionZ"])); + + prim.GroupPosition = new Vector3( + Convert.ToSingle(primRow["GroupPositionX"]), + Convert.ToSingle(primRow["GroupPositionY"]), + Convert.ToSingle(primRow["GroupPositionZ"])); + + prim.Velocity = new Vector3( + Convert.ToSingle(primRow["VelocityX"]), + Convert.ToSingle(primRow["VelocityY"]), + Convert.ToSingle(primRow["VelocityZ"])); + + prim.AngularVelocity = new Vector3( + Convert.ToSingle(primRow["AngularVelocityX"]), + Convert.ToSingle(primRow["AngularVelocityY"]), + Convert.ToSingle(primRow["AngularVelocityZ"])); + + prim.Acceleration = new Vector3( + Convert.ToSingle(primRow["AccelerationX"]), + Convert.ToSingle(primRow["AccelerationY"]), + Convert.ToSingle(primRow["AccelerationZ"])); + + // quaternions + prim.RotationOffset = new Quaternion( + Convert.ToSingle(primRow["RotationX"]), + Convert.ToSingle(primRow["RotationY"]), + Convert.ToSingle(primRow["RotationZ"]), + Convert.ToSingle(primRow["RotationW"])); + + prim.SitTargetPositionLL = new Vector3( + Convert.ToSingle(primRow["SitTargetOffsetX"]), + Convert.ToSingle(primRow["SitTargetOffsetY"]), + Convert.ToSingle(primRow["SitTargetOffsetZ"])); + + prim.SitTargetOrientationLL = new Quaternion( + Convert.ToSingle(primRow["SitTargetOrientX"]), + Convert.ToSingle(primRow["SitTargetOrientY"]), + Convert.ToSingle(primRow["SitTargetOrientZ"]), + Convert.ToSingle(primRow["SitTargetOrientW"])); + + prim.PayPrice[0] = Convert.ToInt32(primRow["PayPrice"]); + prim.PayPrice[1] = Convert.ToInt32(primRow["PayButton1"]); + prim.PayPrice[2] = Convert.ToInt32(primRow["PayButton2"]); + prim.PayPrice[3] = Convert.ToInt32(primRow["PayButton3"]); + prim.PayPrice[4] = Convert.ToInt32(primRow["PayButton4"]); + + prim.Sound = new UUID((Guid)primRow["LoopedSound"]); + prim.SoundGain = Convert.ToSingle(primRow["LoopedSoundGain"]); + prim.SoundFlags = 1; // If it's persisted at all, it's looped + + if (!(primRow["TextureAnimation"] is DBNull)) + prim.TextureAnimation = (Byte[])primRow["TextureAnimation"]; + if (!(primRow["ParticleSystem"] is DBNull)) + prim.ParticleSystem = (Byte[])primRow["ParticleSystem"]; + + prim.RotationalVelocity = new Vector3( + Convert.ToSingle(primRow["OmegaX"]), + Convert.ToSingle(primRow["OmegaY"]), + Convert.ToSingle(primRow["OmegaZ"])); + + prim.SetCameraEyeOffset(new Vector3( + Convert.ToSingle(primRow["CameraEyeOffsetX"]), + Convert.ToSingle(primRow["CameraEyeOffsetY"]), + Convert.ToSingle(primRow["CameraEyeOffsetZ"]) + )); + + prim.SetCameraAtOffset(new Vector3( + Convert.ToSingle(primRow["CameraAtOffsetX"]), + Convert.ToSingle(primRow["CameraAtOffsetY"]), + Convert.ToSingle(primRow["CameraAtOffsetZ"]) + )); + + if (Convert.ToInt16(primRow["ForceMouselook"]) != 0) + prim.SetForceMouselook(true); + + prim.ScriptAccessPin = Convert.ToInt32(primRow["ScriptAccessPin"]); + + if (Convert.ToInt16(primRow["AllowedDrop"]) != 0) + prim.AllowedDrop = true; + + if (Convert.ToInt16(primRow["DieAtEdge"]) != 0) + prim.DIE_AT_EDGE = true; + + prim.SalePrice = Convert.ToInt32(primRow["SalePrice"]); + prim.ObjectSaleType = Convert.ToByte(primRow["SaleType"]); + + prim.Material = Convert.ToByte(primRow["Material"]); + + if (!(primRow["ClickAction"] is DBNull)) + prim.ClickAction = Convert.ToByte(primRow["ClickAction"]); + + prim.CollisionSound = new UUID((Guid)primRow["CollisionSound"]); + prim.CollisionSoundVolume = Convert.ToSingle(primRow["CollisionSoundVolume"]); + if (Convert.ToInt16(primRow["PassTouches"]) != 0) + prim.PassTouches = true; + prim.LinkNum = Convert.ToInt32(primRow["LinkNumber"]); + + return prim; + } + + /// + /// Builds the prim shape from a datarecord. + /// + /// The row. + /// + private static PrimitiveBaseShape BuildShape(IDataRecord shapeRow) + { + PrimitiveBaseShape baseShape = new PrimitiveBaseShape(); + + baseShape.Scale = new Vector3( + Convert.ToSingle(shapeRow["ScaleX"]), + Convert.ToSingle(shapeRow["ScaleY"]), + Convert.ToSingle(shapeRow["ScaleZ"])); + + // paths + baseShape.PCode = Convert.ToByte(shapeRow["PCode"]); + baseShape.PathBegin = Convert.ToUInt16(shapeRow["PathBegin"]); + baseShape.PathEnd = Convert.ToUInt16(shapeRow["PathEnd"]); + baseShape.PathScaleX = Convert.ToByte(shapeRow["PathScaleX"]); + baseShape.PathScaleY = Convert.ToByte(shapeRow["PathScaleY"]); + baseShape.PathShearX = Convert.ToByte(shapeRow["PathShearX"]); + baseShape.PathShearY = Convert.ToByte(shapeRow["PathShearY"]); + baseShape.PathSkew = Convert.ToSByte(shapeRow["PathSkew"]); + baseShape.PathCurve = Convert.ToByte(shapeRow["PathCurve"]); + baseShape.PathRadiusOffset = Convert.ToSByte(shapeRow["PathRadiusOffset"]); + baseShape.PathRevolutions = Convert.ToByte(shapeRow["PathRevolutions"]); + baseShape.PathTaperX = Convert.ToSByte(shapeRow["PathTaperX"]); + baseShape.PathTaperY = Convert.ToSByte(shapeRow["PathTaperY"]); + baseShape.PathTwist = Convert.ToSByte(shapeRow["PathTwist"]); + baseShape.PathTwistBegin = Convert.ToSByte(shapeRow["PathTwistBegin"]); + // profile + baseShape.ProfileBegin = Convert.ToUInt16(shapeRow["ProfileBegin"]); + baseShape.ProfileEnd = Convert.ToUInt16(shapeRow["ProfileEnd"]); + baseShape.ProfileCurve = Convert.ToByte(shapeRow["ProfileCurve"]); + baseShape.ProfileHollow = Convert.ToUInt16(shapeRow["ProfileHollow"]); + + byte[] textureEntry = (byte[])shapeRow["Texture"]; + baseShape.TextureEntry = textureEntry; + + baseShape.ExtraParams = (byte[])shapeRow["ExtraParams"]; + + try + { + baseShape.State = Convert.ToByte(shapeRow["State"]); + } + catch (InvalidCastException) + { + } + + return baseShape; + } + + /// + /// Build a prim inventory item from the persisted data. + /// + /// + /// + private static TaskInventoryItem BuildItem(IDataRecord inventoryRow) + { + TaskInventoryItem taskItem = new TaskInventoryItem(); + + taskItem.ItemID = new UUID((Guid)inventoryRow["itemID"]); + taskItem.ParentPartID = new UUID((Guid)inventoryRow["primID"]); + taskItem.AssetID = new UUID((Guid)inventoryRow["assetID"]); + taskItem.ParentID = new UUID((Guid)inventoryRow["parentFolderID"]); + + taskItem.InvType = Convert.ToInt32(inventoryRow["invType"]); + taskItem.Type = Convert.ToInt32(inventoryRow["assetType"]); + + taskItem.Name = (string)inventoryRow["name"]; + taskItem.Description = (string)inventoryRow["description"]; + taskItem.CreationDate = Convert.ToUInt32(inventoryRow["creationDate"]); + taskItem.CreatorID = new UUID((Guid)inventoryRow["creatorID"]); + taskItem.OwnerID = new UUID((Guid)inventoryRow["ownerID"]); + taskItem.LastOwnerID = new UUID((Guid)inventoryRow["lastOwnerID"]); + taskItem.GroupID = new UUID((Guid)inventoryRow["groupID"]); + + taskItem.NextPermissions = Convert.ToUInt32(inventoryRow["nextPermissions"]); + taskItem.CurrentPermissions = Convert.ToUInt32(inventoryRow["currentPermissions"]); + taskItem.BasePermissions = Convert.ToUInt32(inventoryRow["basePermissions"]); + taskItem.EveryonePermissions = Convert.ToUInt32(inventoryRow["everyonePermissions"]); + taskItem.GroupPermissions = Convert.ToUInt32(inventoryRow["groupPermissions"]); + taskItem.Flags = Convert.ToUInt32(inventoryRow["flags"]); + + return taskItem; + } + + #endregion + + #region Create parameters methods + + /// + /// Creates the prim inventory parameters. + /// + /// item in inventory. + /// + private SqlParameter[] CreatePrimInventoryParameters(TaskInventoryItem taskItem) + { + List parameters = new List(); + + parameters.Add(_Database.CreateParameter("itemID", taskItem.ItemID)); + parameters.Add(_Database.CreateParameter("primID", taskItem.ParentPartID)); + parameters.Add(_Database.CreateParameter("assetID", taskItem.AssetID)); + parameters.Add(_Database.CreateParameter("parentFolderID", taskItem.ParentID)); + parameters.Add(_Database.CreateParameter("invType", taskItem.InvType)); + parameters.Add(_Database.CreateParameter("assetType", taskItem.Type)); + + parameters.Add(_Database.CreateParameter("name", taskItem.Name)); + parameters.Add(_Database.CreateParameter("description", taskItem.Description)); + parameters.Add(_Database.CreateParameter("creationDate", taskItem.CreationDate)); + parameters.Add(_Database.CreateParameter("creatorID", taskItem.CreatorID)); + parameters.Add(_Database.CreateParameter("ownerID", taskItem.OwnerID)); + parameters.Add(_Database.CreateParameter("lastOwnerID", taskItem.LastOwnerID)); + parameters.Add(_Database.CreateParameter("groupID", taskItem.GroupID)); + parameters.Add(_Database.CreateParameter("nextPermissions", taskItem.NextPermissions)); + parameters.Add(_Database.CreateParameter("currentPermissions", taskItem.CurrentPermissions)); + parameters.Add(_Database.CreateParameter("basePermissions", taskItem.BasePermissions)); + parameters.Add(_Database.CreateParameter("everyonePermissions", taskItem.EveryonePermissions)); + parameters.Add(_Database.CreateParameter("groupPermissions", taskItem.GroupPermissions)); + parameters.Add(_Database.CreateParameter("flags", taskItem.Flags)); + + return parameters.ToArray(); + } + + /// + /// Creates the region setting parameters. + /// + /// regionsettings. + /// + private SqlParameter[] CreateRegionSettingParameters(RegionSettings settings) + { + List parameters = new List(); + + parameters.Add(_Database.CreateParameter("regionUUID", settings.RegionUUID)); + parameters.Add(_Database.CreateParameter("block_terraform", settings.BlockTerraform)); + parameters.Add(_Database.CreateParameter("block_fly", settings.BlockFly)); + parameters.Add(_Database.CreateParameter("allow_damage", settings.AllowDamage)); + parameters.Add(_Database.CreateParameter("restrict_pushing", settings.RestrictPushing)); + parameters.Add(_Database.CreateParameter("allow_land_resell", settings.AllowLandResell)); + parameters.Add(_Database.CreateParameter("allow_land_join_divide", settings.AllowLandJoinDivide)); + parameters.Add(_Database.CreateParameter("block_show_in_search", settings.BlockShowInSearch)); + parameters.Add(_Database.CreateParameter("agent_limit", settings.AgentLimit)); + parameters.Add(_Database.CreateParameter("object_bonus", settings.ObjectBonus)); + parameters.Add(_Database.CreateParameter("maturity", settings.Maturity)); + parameters.Add(_Database.CreateParameter("disable_scripts", settings.DisableScripts)); + parameters.Add(_Database.CreateParameter("disable_collisions", settings.DisableCollisions)); + parameters.Add(_Database.CreateParameter("disable_physics", settings.DisablePhysics)); + parameters.Add(_Database.CreateParameter("terrain_texture_1", settings.TerrainTexture1)); + parameters.Add(_Database.CreateParameter("terrain_texture_2", settings.TerrainTexture2)); + parameters.Add(_Database.CreateParameter("terrain_texture_3", settings.TerrainTexture3)); + parameters.Add(_Database.CreateParameter("terrain_texture_4", settings.TerrainTexture4)); + parameters.Add(_Database.CreateParameter("elevation_1_nw", settings.Elevation1NW)); + parameters.Add(_Database.CreateParameter("elevation_2_nw", settings.Elevation2NW)); + parameters.Add(_Database.CreateParameter("elevation_1_ne", settings.Elevation1NE)); + parameters.Add(_Database.CreateParameter("elevation_2_ne", settings.Elevation2NE)); + parameters.Add(_Database.CreateParameter("elevation_1_se", settings.Elevation1SE)); + parameters.Add(_Database.CreateParameter("elevation_2_se", settings.Elevation2SE)); + parameters.Add(_Database.CreateParameter("elevation_1_sw", settings.Elevation1SW)); + parameters.Add(_Database.CreateParameter("elevation_2_sw", settings.Elevation2SW)); + parameters.Add(_Database.CreateParameter("water_height", settings.WaterHeight)); + parameters.Add(_Database.CreateParameter("terrain_raise_limit", settings.TerrainRaiseLimit)); + parameters.Add(_Database.CreateParameter("terrain_lower_limit", settings.TerrainLowerLimit)); + parameters.Add(_Database.CreateParameter("use_estate_sun", settings.UseEstateSun)); + parameters.Add(_Database.CreateParameter("sandbox", settings.Sandbox)); + parameters.Add(_Database.CreateParameter("fixed_sun", settings.FixedSun)); + parameters.Add(_Database.CreateParameter("sun_position", settings.SunPosition)); + parameters.Add(_Database.CreateParameter("sunvectorx", settings.SunVector.X)); + parameters.Add(_Database.CreateParameter("sunvectory", settings.SunVector.Y)); + parameters.Add(_Database.CreateParameter("sunvectorz", settings.SunVector.Z)); + parameters.Add(_Database.CreateParameter("covenant", settings.Covenant)); + parameters.Add(_Database.CreateParameter("Loaded_Creation_DateTime", settings.LoadedCreationDateTime)); + parameters.Add(_Database.CreateParameter("Loaded_Creation_ID", settings.LoadedCreationID)); + + return parameters.ToArray(); + } + + /// + /// Creates the land parameters. + /// + /// land parameters. + /// region UUID. + /// + private SqlParameter[] CreateLandParameters(LandData land, UUID regionUUID) + { + List parameters = new List(); + + parameters.Add(_Database.CreateParameter("UUID", land.GlobalID)); + parameters.Add(_Database.CreateParameter("RegionUUID", regionUUID)); + parameters.Add(_Database.CreateParameter("LocalLandID", land.LocalID)); + + // Bitmap is a byte[512] + parameters.Add(_Database.CreateParameter("Bitmap", land.Bitmap)); + + parameters.Add(_Database.CreateParameter("Name", land.Name)); + parameters.Add(_Database.CreateParameter("Description", land.Description)); + parameters.Add(_Database.CreateParameter("OwnerUUID", land.OwnerID)); + parameters.Add(_Database.CreateParameter("IsGroupOwned", land.IsGroupOwned)); + parameters.Add(_Database.CreateParameter("Area", land.Area)); + parameters.Add(_Database.CreateParameter("AuctionID", land.AuctionID)); //Unemplemented + parameters.Add(_Database.CreateParameter("Category", (int)land.Category)); //Enum libsecondlife.Parcel.ParcelCategory + parameters.Add(_Database.CreateParameter("ClaimDate", land.ClaimDate)); + parameters.Add(_Database.CreateParameter("ClaimPrice", land.ClaimPrice)); + parameters.Add(_Database.CreateParameter("GroupUUID", land.GroupID)); + parameters.Add(_Database.CreateParameter("SalePrice", land.SalePrice)); + parameters.Add(_Database.CreateParameter("LandStatus", (int)land.Status)); //Enum. libsecondlife.Parcel.ParcelStatus + parameters.Add(_Database.CreateParameter("LandFlags", land.Flags)); + parameters.Add(_Database.CreateParameter("LandingType", land.LandingType)); + parameters.Add(_Database.CreateParameter("MediaAutoScale", land.MediaAutoScale)); + parameters.Add(_Database.CreateParameter("MediaTextureUUID", land.MediaID)); + parameters.Add(_Database.CreateParameter("MediaURL", land.MediaURL)); + parameters.Add(_Database.CreateParameter("MusicURL", land.MusicURL)); + parameters.Add(_Database.CreateParameter("PassHours", land.PassHours)); + parameters.Add(_Database.CreateParameter("PassPrice", land.PassPrice)); + parameters.Add(_Database.CreateParameter("SnapshotUUID", land.SnapshotID)); + parameters.Add(_Database.CreateParameter("UserLocationX", land.UserLocation.X)); + parameters.Add(_Database.CreateParameter("UserLocationY", land.UserLocation.Y)); + parameters.Add(_Database.CreateParameter("UserLocationZ", land.UserLocation.Z)); + parameters.Add(_Database.CreateParameter("UserLookAtX", land.UserLookAt.X)); + parameters.Add(_Database.CreateParameter("UserLookAtY", land.UserLookAt.Y)); + parameters.Add(_Database.CreateParameter("UserLookAtZ", land.UserLookAt.Z)); + parameters.Add(_Database.CreateParameter("AuthBuyerID", land.AuthBuyerID)); + parameters.Add(_Database.CreateParameter("OtherCleanTime", land.OtherCleanTime)); + parameters.Add(_Database.CreateParameter("Dwell", land.Dwell)); + + return parameters.ToArray(); + } + + /// + /// Creates the land access parameters. + /// + /// parcel access entry. + /// parcel ID. + /// + private SqlParameter[] CreateLandAccessParameters(ParcelManager.ParcelAccessEntry parcelAccessEntry, UUID parcelID) + { + List parameters = new List(); + + parameters.Add(_Database.CreateParameter("LandUUID", parcelID)); + parameters.Add(_Database.CreateParameter("AccessUUID", parcelAccessEntry.AgentID)); + parameters.Add(_Database.CreateParameter("Flags", parcelAccessEntry.Flags)); + + return parameters.ToArray(); + } + + /// + /// Creates the prim parameters for storing in DB. + /// + /// Basic data of SceneObjectpart prim. + /// The scenegroup ID. + /// The region ID. + /// + private SqlParameter[] CreatePrimParameters(SceneObjectPart prim, UUID sceneGroupID, UUID regionUUID) + { + List parameters = new List(); + + parameters.Add(_Database.CreateParameter("UUID", prim.UUID)); + parameters.Add(_Database.CreateParameter("RegionUUID", regionUUID)); + parameters.Add(_Database.CreateParameter("CreationDate", prim.CreationDate)); + parameters.Add(_Database.CreateParameter("Name", prim.Name)); + parameters.Add(_Database.CreateParameter("SceneGroupID", sceneGroupID)); + // the UUID of the root part for this SceneObjectGroup + // various text fields + parameters.Add(_Database.CreateParameter("Text", prim.Text)); + parameters.Add(_Database.CreateParameter("ColorR", prim.Color.R)); + parameters.Add(_Database.CreateParameter("ColorG", prim.Color.G)); + parameters.Add(_Database.CreateParameter("ColorB", prim.Color.B)); + parameters.Add(_Database.CreateParameter("ColorA", prim.Color.A)); + parameters.Add(_Database.CreateParameter("Description", prim.Description)); + parameters.Add(_Database.CreateParameter("SitName", prim.SitName)); + parameters.Add(_Database.CreateParameter("TouchName", prim.TouchName)); + // permissions + parameters.Add(_Database.CreateParameter("ObjectFlags", prim.ObjectFlags)); + parameters.Add(_Database.CreateParameter("CreatorID", prim.CreatorID)); + parameters.Add(_Database.CreateParameter("OwnerID", prim.OwnerID)); + parameters.Add(_Database.CreateParameter("GroupID", prim.GroupID)); + parameters.Add(_Database.CreateParameter("LastOwnerID", prim.LastOwnerID)); + parameters.Add(_Database.CreateParameter("OwnerMask", prim.OwnerMask)); + parameters.Add(_Database.CreateParameter("NextOwnerMask", prim.NextOwnerMask)); + parameters.Add(_Database.CreateParameter("GroupMask", prim.GroupMask)); + parameters.Add(_Database.CreateParameter("EveryoneMask", prim.EveryoneMask)); + parameters.Add(_Database.CreateParameter("BaseMask", prim.BaseMask)); + // vectors + parameters.Add(_Database.CreateParameter("PositionX", prim.OffsetPosition.X)); + parameters.Add(_Database.CreateParameter("PositionY", prim.OffsetPosition.Y)); + parameters.Add(_Database.CreateParameter("PositionZ", prim.OffsetPosition.Z)); + parameters.Add(_Database.CreateParameter("GroupPositionX", prim.GroupPosition.X)); + parameters.Add(_Database.CreateParameter("GroupPositionY", prim.GroupPosition.Y)); + parameters.Add(_Database.CreateParameter("GroupPositionZ", prim.GroupPosition.Z)); + parameters.Add(_Database.CreateParameter("VelocityX", prim.Velocity.X)); + parameters.Add(_Database.CreateParameter("VelocityY", prim.Velocity.Y)); + parameters.Add(_Database.CreateParameter("VelocityZ", prim.Velocity.Z)); + parameters.Add(_Database.CreateParameter("AngularVelocityX", prim.AngularVelocity.X)); + parameters.Add(_Database.CreateParameter("AngularVelocityY", prim.AngularVelocity.Y)); + parameters.Add(_Database.CreateParameter("AngularVelocityZ", prim.AngularVelocity.Z)); + parameters.Add(_Database.CreateParameter("AccelerationX", prim.Acceleration.X)); + parameters.Add(_Database.CreateParameter("AccelerationY", prim.Acceleration.Y)); + parameters.Add(_Database.CreateParameter("AccelerationZ", prim.Acceleration.Z)); + // quaternions + parameters.Add(_Database.CreateParameter("RotationX", prim.RotationOffset.X)); + parameters.Add(_Database.CreateParameter("RotationY", prim.RotationOffset.Y)); + parameters.Add(_Database.CreateParameter("RotationZ", prim.RotationOffset.Z)); + parameters.Add(_Database.CreateParameter("RotationW", prim.RotationOffset.W)); + + // Sit target + Vector3 sitTargetPos = prim.SitTargetPositionLL; + parameters.Add(_Database.CreateParameter("SitTargetOffsetX", sitTargetPos.X)); + parameters.Add(_Database.CreateParameter("SitTargetOffsetY", sitTargetPos.Y)); + parameters.Add(_Database.CreateParameter("SitTargetOffsetZ", sitTargetPos.Z)); + + Quaternion sitTargetOrient = prim.SitTargetOrientationLL; + parameters.Add(_Database.CreateParameter("SitTargetOrientW", sitTargetOrient.W)); + parameters.Add(_Database.CreateParameter("SitTargetOrientX", sitTargetOrient.X)); + parameters.Add(_Database.CreateParameter("SitTargetOrientY", sitTargetOrient.Y)); + parameters.Add(_Database.CreateParameter("SitTargetOrientZ", sitTargetOrient.Z)); + + parameters.Add(_Database.CreateParameter("PayPrice", prim.PayPrice[0])); + parameters.Add(_Database.CreateParameter("PayButton1", prim.PayPrice[1])); + parameters.Add(_Database.CreateParameter("PayButton2", prim.PayPrice[2])); + parameters.Add(_Database.CreateParameter("PayButton3", prim.PayPrice[3])); + parameters.Add(_Database.CreateParameter("PayButton4", prim.PayPrice[4])); + + if ((prim.SoundFlags & 1) != 0) // Looped + { + parameters.Add(_Database.CreateParameter("LoopedSound", prim.Sound)); + parameters.Add(_Database.CreateParameter("LoopedSoundGain", prim.SoundGain)); + } + else + { + parameters.Add(_Database.CreateParameter("LoopedSound", UUID.Zero)); + parameters.Add(_Database.CreateParameter("LoopedSoundGain", 0.0f)); + } + + parameters.Add(_Database.CreateParameter("TextureAnimation", prim.TextureAnimation)); + parameters.Add(_Database.CreateParameter("ParticleSystem", prim.ParticleSystem)); + + parameters.Add(_Database.CreateParameter("OmegaX", prim.RotationalVelocity.X)); + parameters.Add(_Database.CreateParameter("OmegaY", prim.RotationalVelocity.Y)); + parameters.Add(_Database.CreateParameter("OmegaZ", prim.RotationalVelocity.Z)); + + parameters.Add(_Database.CreateParameter("CameraEyeOffsetX", prim.GetCameraEyeOffset().X)); + parameters.Add(_Database.CreateParameter("CameraEyeOffsetY", prim.GetCameraEyeOffset().Y)); + parameters.Add(_Database.CreateParameter("CameraEyeOffsetZ", prim.GetCameraEyeOffset().Z)); + + parameters.Add(_Database.CreateParameter("CameraAtOffsetX", prim.GetCameraAtOffset().X)); + parameters.Add(_Database.CreateParameter("CameraAtOffsetY", prim.GetCameraAtOffset().Y)); + parameters.Add(_Database.CreateParameter("CameraAtOffsetZ", prim.GetCameraAtOffset().Z)); + + if (prim.GetForceMouselook()) + parameters.Add(_Database.CreateParameter("ForceMouselook", 1)); + else + parameters.Add(_Database.CreateParameter("ForceMouselook", 0)); + + parameters.Add(_Database.CreateParameter("ScriptAccessPin", prim.ScriptAccessPin)); + + if (prim.AllowedDrop) + parameters.Add(_Database.CreateParameter("AllowedDrop", 1)); + else + parameters.Add(_Database.CreateParameter("AllowedDrop", 0)); + + if (prim.DIE_AT_EDGE) + parameters.Add(_Database.CreateParameter("DieAtEdge", 1)); + else + parameters.Add(_Database.CreateParameter("DieAtEdge", 0)); + + parameters.Add(_Database.CreateParameter("SalePrice", prim.SalePrice)); + parameters.Add(_Database.CreateParameter("SaleType", prim.ObjectSaleType)); + + byte clickAction = prim.ClickAction; + parameters.Add(_Database.CreateParameter("ClickAction", clickAction)); + + parameters.Add(_Database.CreateParameter("Material", prim.Material)); + + parameters.Add(_Database.CreateParameter("CollisionSound", prim.CollisionSound)); + parameters.Add(_Database.CreateParameter("CollisionSoundVolume", prim.CollisionSoundVolume)); + if (prim.PassTouches) + parameters.Add(_Database.CreateParameter("PassTouches", 1)); + else + parameters.Add(_Database.CreateParameter("PassTouches", 0)); + parameters.Add(_Database.CreateParameter("LinkNumber", prim.LinkNum)); + + return parameters.ToArray(); + } + + /// + /// Creates the primshape parameters for stroing in DB. + /// + /// Basic data of SceneObjectpart prim. + /// The scene group ID. + /// The region UUID. + /// + private SqlParameter[] CreatePrimShapeParameters(SceneObjectPart prim, UUID sceneGroupID, UUID regionUUID) + { + List parameters = new List(); + + PrimitiveBaseShape s = prim.Shape; + parameters.Add(_Database.CreateParameter("UUID", prim.UUID)); + // shape is an enum + parameters.Add(_Database.CreateParameter("Shape", 0)); + // vectors + parameters.Add(_Database.CreateParameter("ScaleX", s.Scale.X)); + parameters.Add(_Database.CreateParameter("ScaleY", s.Scale.Y)); + parameters.Add(_Database.CreateParameter("ScaleZ", s.Scale.Z)); + // paths + parameters.Add(_Database.CreateParameter("PCode", s.PCode)); + parameters.Add(_Database.CreateParameter("PathBegin", s.PathBegin)); + parameters.Add(_Database.CreateParameter("PathEnd", s.PathEnd)); + parameters.Add(_Database.CreateParameter("PathScaleX", s.PathScaleX)); + parameters.Add(_Database.CreateParameter("PathScaleY", s.PathScaleY)); + parameters.Add(_Database.CreateParameter("PathShearX", s.PathShearX)); + parameters.Add(_Database.CreateParameter("PathShearY", s.PathShearY)); + parameters.Add(_Database.CreateParameter("PathSkew", s.PathSkew)); + parameters.Add(_Database.CreateParameter("PathCurve", s.PathCurve)); + parameters.Add(_Database.CreateParameter("PathRadiusOffset", s.PathRadiusOffset)); + parameters.Add(_Database.CreateParameter("PathRevolutions", s.PathRevolutions)); + parameters.Add(_Database.CreateParameter("PathTaperX", s.PathTaperX)); + parameters.Add(_Database.CreateParameter("PathTaperY", s.PathTaperY)); + parameters.Add(_Database.CreateParameter("PathTwist", s.PathTwist)); + parameters.Add(_Database.CreateParameter("PathTwistBegin", s.PathTwistBegin)); + // profile + parameters.Add(_Database.CreateParameter("ProfileBegin", s.ProfileBegin)); + parameters.Add(_Database.CreateParameter("ProfileEnd", s.ProfileEnd)); + parameters.Add(_Database.CreateParameter("ProfileCurve", s.ProfileCurve)); + parameters.Add(_Database.CreateParameter("ProfileHollow", s.ProfileHollow)); + parameters.Add(_Database.CreateParameter("Texture", s.TextureEntry)); + parameters.Add(_Database.CreateParameter("ExtraParams", s.ExtraParams)); + parameters.Add(_Database.CreateParameter("State", s.State)); + + return parameters.ToArray(); + } + + #endregion + + #endregion + } +} -- cgit v1.1