From 8f02fd926e14dfad7f5eb77a67a6701f449511e0 Mon Sep 17 00:00:00 2001 From: Justin Clark-Casey (justincc) Date: Thu, 6 Sep 2012 22:12:05 +0100 Subject: If reusing dynamic textures, do not reuse small data length textures that fall below current viewer discard level 2 thresholds. Viewer LL 3.3.4 and before sometimes fail to properly redisplay dynamic textures that have a small data length compared to pixel size when pulled from cache. This appears to happen when the data length is smaller than the estimate discard level 2 size the viewer uses when making this GetTexture request. This commit works around this by always regenerating dynamic textures that fall below this threshold rather than reusing them if ReuseDynamicTextures = true This can be controlled by the [Textures] ReuseDynamicLowDataTextures config setting which defaults to false. --- .../DynamicTexture/DynamicTextureModule.cs | 59 ++++++++++++++++++---- .../Scripting/LoadImageURL/LoadImageURLModule.cs | 41 +++++++++------ .../VectorRender/Tests/VectorRenderModuleTests.cs | 42 +++++++++++++++ .../Scripting/VectorRender/VectorRenderModule.cs | 24 ++++----- .../Grid/Tests/GridConnectorsTests.cs | 2 +- .../World/Archiver/Tests/ArchiverTests.cs | 2 +- .../Framework/Interfaces/IDynamicTextureManager.cs | 57 +++++++++++++++++++-- bin/OpenSimDefaults.ini | 7 +++ 8 files changed, 188 insertions(+), 46 deletions(-) diff --git a/OpenSim/Region/CoreModules/Scripting/DynamicTexture/DynamicTextureModule.cs b/OpenSim/Region/CoreModules/Scripting/DynamicTexture/DynamicTextureModule.cs index e09f1a9..1f340df 100644 --- a/OpenSim/Region/CoreModules/Scripting/DynamicTexture/DynamicTextureModule.cs +++ b/OpenSim/Region/CoreModules/Scripting/DynamicTexture/DynamicTextureModule.cs @@ -42,7 +42,7 @@ namespace OpenSim.Region.CoreModules.Scripting.DynamicTexture { public class DynamicTextureModule : IRegionModule, IDynamicTextureManager { -// private static readonly ILog m_log = LogManager.GetLogger(MethodBase.GetCurrentMethod().DeclaringType); + private static readonly ILog m_log = LogManager.GetLogger(MethodBase.GetCurrentMethod().DeclaringType); private const int ALL_SIDES = -1; @@ -54,6 +54,17 @@ namespace OpenSim.Region.CoreModules.Scripting.DynamicTexture /// public bool ReuseTextures { get; set; } + /// + /// If false, then textures which have a low data size are not reused when ReuseTextures = true. + /// + /// + /// LL viewers 3.3.4 and before appear to not fully render textures pulled from the viewer cache if those + /// textures have a relatively high pixel surface but a small data size. Typically, this appears to happen + /// if the data size is smaller than the viewer's discard level 2 size estimate. So if this is setting is + /// false, textures smaller than the calculation in IsSizeReuseable are always regenerated rather than reused + /// to work around this problem. + public bool ReuseLowDataTextures { get; set; } + private Dictionary RegisteredScenes = new Dictionary(); private Dictionary RenderPlugins = @@ -83,18 +94,17 @@ namespace OpenSim.Region.CoreModules.Scripting.DynamicTexture /// /// Called by code which actually renders the dynamic texture to supply texture data. /// - /// - /// - /// True if the data generated can be reused for subsequent identical requests - public void ReturnData(UUID id, byte[] data, bool isReuseable) + /// + /// + public void ReturnData(UUID updaterId, IDynamicTexture texture) { DynamicTextureUpdater updater = null; lock (Updaters) { - if (Updaters.ContainsKey(id)) + if (Updaters.ContainsKey(updaterId)) { - updater = Updaters[id]; + updater = Updaters[updaterId]; } } @@ -103,11 +113,16 @@ namespace OpenSim.Region.CoreModules.Scripting.DynamicTexture if (RegisteredScenes.ContainsKey(updater.SimUUID)) { Scene scene = RegisteredScenes[updater.SimUUID]; - UUID newTextureID = updater.DataReceived(data, scene); + UUID newTextureID = updater.DataReceived(texture.Data, scene); - if (ReuseTextures && isReuseable && !updater.BlendWithOldTexture) + if (ReuseTextures + && !updater.BlendWithOldTexture + && texture.IsReuseable + && (ReuseLowDataTextures || IsDataSizeReuseable(texture))) + { m_reuseableDynamicTextures.Store( - GenerateReusableTextureKey(updater.BodyData, updater.Params), newTextureID); + GenerateReusableTextureKey(texture.InputCommands, texture.InputParams), newTextureID); + } } } @@ -123,6 +138,27 @@ namespace OpenSim.Region.CoreModules.Scripting.DynamicTexture } } + /// + /// Determines whether the texture is reuseable based on its data size. + /// + /// + /// This is a workaround for a viewer bug where very small data size textures relative to their pixel size + /// are not redisplayed properly when pulled from cache. The calculation here is based on the typical discard + /// level of 2, a 'rate' of 0.125 and 4 components (which makes for a factor of 0.5). + /// + /// + private bool IsDataSizeReuseable(IDynamicTexture texture) + { +// Console.WriteLine("{0} {1}", texture.Size.Width, texture.Size.Height); + int discardLevel2DataThreshold = (int)Math.Ceiling((texture.Size.Width >> 2) * (texture.Size.Height >> 2) * 0.5); + +// m_log.DebugFormat( +// "[DYNAMIC TEXTURE MODULE]: Discard level 2 threshold {0}, texture data length {1}", +// discardLevel2DataThreshold, texture.Data.Length); + + return discardLevel2DataThreshold < texture.Data.Length; + } + public UUID AddDynamicTextureURL(UUID simID, UUID primID, string contentType, string url, string extraParams, int updateTimer) { @@ -293,7 +329,10 @@ namespace OpenSim.Region.CoreModules.Scripting.DynamicTexture { IConfig texturesConfig = config.Configs["Textures"]; if (texturesConfig != null) + { ReuseTextures = texturesConfig.GetBoolean("ReuseDynamicTextures", false); + ReuseLowDataTextures = texturesConfig.GetBoolean("ReuseDynamicLowDataTextures", false); + } if (!RegisteredScenes.ContainsKey(scene.RegionInfo.RegionID)) { diff --git a/OpenSim/Region/CoreModules/Scripting/LoadImageURL/LoadImageURLModule.cs b/OpenSim/Region/CoreModules/Scripting/LoadImageURL/LoadImageURLModule.cs index 2b3a0f2..45e6527 100644 --- a/OpenSim/Region/CoreModules/Scripting/LoadImageURL/LoadImageURLModule.cs +++ b/OpenSim/Region/CoreModules/Scripting/LoadImageURL/LoadImageURLModule.cs @@ -32,6 +32,7 @@ using System.Net; using Nini.Config; using OpenMetaverse; using OpenMetaverse.Imaging; +using OpenSim.Region.CoreModules.Scripting.DynamicTexture; using OpenSim.Region.Framework.Interfaces; using OpenSim.Region.Framework.Scenes; using log4net; @@ -73,12 +74,12 @@ namespace OpenSim.Region.CoreModules.Scripting.LoadImageURL // return false; // } - public byte[] ConvertUrl(string url, string extraParams) + public IDynamicTexture ConvertUrl(string url, string extraParams) { return null; } - public byte[] ConvertData(string bodyData, string extraParams) + public IDynamicTexture ConvertData(string bodyData, string extraParams) { return null; } @@ -171,11 +172,11 @@ namespace OpenSim.Region.CoreModules.Scripting.LoadImageURL private void HttpRequestReturn(IAsyncResult result) { - RequestState state = (RequestState) result.AsyncState; WebRequest request = (WebRequest) state.Request; Stream stream = null; byte[] imageJ2000 = new byte[0]; + Size newSize = new Size(0, 0); try { @@ -188,37 +189,43 @@ namespace OpenSim.Region.CoreModules.Scripting.LoadImageURL try { Bitmap image = new Bitmap(stream); - Size newsize; // TODO: make this a bit less hard coded if ((image.Height < 64) && (image.Width < 64)) { - newsize = new Size(32, 32); + newSize.Width = 32; + newSize.Height = 32; } else if ((image.Height < 128) && (image.Width < 128)) { - newsize = new Size(64, 64); + newSize.Width = 64; + newSize.Height = 64; } else if ((image.Height < 256) && (image.Width < 256)) { - newsize = new Size(128, 128); + newSize.Width = 128; + newSize.Height = 128; } else if ((image.Height < 512 && image.Width < 512)) { - newsize = new Size(256, 256); + newSize.Width = 256; + newSize.Height = 256; } else if ((image.Height < 1024 && image.Width < 1024)) { - newsize = new Size(512, 512); + newSize.Width = 512; + newSize.Height = 512; } else { - newsize = new Size(1024, 1024); + newSize.Width = 1024; + newSize.Height = 1024; } - Bitmap resize = new Bitmap(image, newsize); - - imageJ2000 = OpenJPEG.EncodeFromImage(resize, true); + using (Bitmap resize = new Bitmap(image, newSize)) + { + imageJ2000 = OpenJPEG.EncodeFromImage(resize, true); + } } catch (Exception) { @@ -233,7 +240,6 @@ namespace OpenSim.Region.CoreModules.Scripting.LoadImageURL } catch (WebException) { - } finally { @@ -243,10 +249,13 @@ namespace OpenSim.Region.CoreModules.Scripting.LoadImageURL } } - m_log.DebugFormat("[LOADIMAGEURLMODULE] Returning {0} bytes of image data for request {1}", + m_log.DebugFormat("[LOADIMAGEURLMODULE]: Returning {0} bytes of image data for request {1}", imageJ2000.Length, state.RequestID); - m_textureManager.ReturnData(state.RequestID, imageJ2000, false); + m_textureManager.ReturnData( + state.RequestID, + new OpenSim.Region.CoreModules.Scripting.DynamicTexture.DynamicTexture( + request.RequestUri, null, imageJ2000, newSize, false)); } #region Nested type: RequestState diff --git a/OpenSim/Region/CoreModules/Scripting/VectorRender/Tests/VectorRenderModuleTests.cs b/OpenSim/Region/CoreModules/Scripting/VectorRender/Tests/VectorRenderModuleTests.cs index b50c0bd..41baccc 100644 --- a/OpenSim/Region/CoreModules/Scripting/VectorRender/Tests/VectorRenderModuleTests.cs +++ b/OpenSim/Region/CoreModules/Scripting/VectorRender/Tests/VectorRenderModuleTests.cs @@ -57,6 +57,7 @@ namespace OpenSim.Region.CoreModules.Scripting.VectorRender.Tests m_dtm = new DynamicTextureModule(); m_dtm.ReuseTextures = reuseTextures; +// m_dtm.ReuseLowDataTextures = reuseTextures; m_vrm = new VectorRenderModule(); @@ -201,6 +202,7 @@ namespace OpenSim.Region.CoreModules.Scripting.VectorRender.Tests public void TestRepeatSameDrawReusingTexture() { TestHelpers.InMethod(); +// TestHelpers.EnableLogging(); string dtText = "PenColour BLACK; MoveTo 40,220; FontSize 32; Text Hello World;"; @@ -228,6 +230,46 @@ namespace OpenSim.Region.CoreModules.Scripting.VectorRender.Tests Assert.That(firstDynamicTextureID, Is.EqualTo(so.RootPart.Shape.Textures.GetFace(0).TextureID)); } + /// + /// Test a low data dynamically generated texture such that it is treated as a low data texture that causes + /// problems for current viewers. + /// + /// + /// As we do not set DynamicTextureModule.ReuseLowDataTextures = true in this test, it should not reuse the + /// texture + /// + [Test] + public void TestRepeatSameDrawLowDataTexture() + { + TestHelpers.InMethod(); +// TestHelpers.EnableLogging(); + + string dtText = "PenColour BLACK; MoveTo 40,220; FontSize 32; Text Hello World;"; + + SetupScene(true); + SceneObjectGroup so = SceneHelpers.AddSceneObject(m_scene); + + m_dtm.AddDynamicTextureData( + m_scene.RegionInfo.RegionID, + so.UUID, + m_vrm.GetContentType(), + dtText, + "1024", + 0); + + UUID firstDynamicTextureID = so.RootPart.Shape.Textures.GetFace(0).TextureID; + + m_dtm.AddDynamicTextureData( + m_scene.RegionInfo.RegionID, + so.UUID, + m_vrm.GetContentType(), + dtText, + "1024", + 0); + + Assert.That(firstDynamicTextureID, Is.Not.EqualTo(so.RootPart.Shape.Textures.GetFace(0).TextureID)); + } + [Test] public void TestRepeatSameDrawDifferentExtraParamsReusingTexture() { diff --git a/OpenSim/Region/CoreModules/Scripting/VectorRender/VectorRenderModule.cs b/OpenSim/Region/CoreModules/Scripting/VectorRender/VectorRenderModule.cs index 0e7051e..d82551e 100644 --- a/OpenSim/Region/CoreModules/Scripting/VectorRender/VectorRenderModule.cs +++ b/OpenSim/Region/CoreModules/Scripting/VectorRender/VectorRenderModule.cs @@ -35,6 +35,7 @@ using System.Net; using Nini.Config; using OpenMetaverse; using OpenMetaverse.Imaging; +using OpenSim.Region.CoreModules.Scripting.DynamicTexture; using OpenSim.Region.Framework.Interfaces; using OpenSim.Region.Framework.Scenes; using log4net; @@ -85,20 +86,14 @@ namespace OpenSim.Region.CoreModules.Scripting.VectorRender // return lines.Any((str, r) => str.StartsWith("Image")); // } - public byte[] ConvertUrl(string url, string extraParams) + public IDynamicTexture ConvertUrl(string url, string extraParams) { return null; } - public byte[] ConvertData(string bodyData, string extraParams) + public IDynamicTexture ConvertData(string bodyData, string extraParams) { - bool reuseable; - return Draw(bodyData, extraParams, out reuseable); - } - - private byte[] ConvertData(string bodyData, string extraParams, out bool reuseable) - { - return Draw(bodyData, extraParams, out reuseable); + return Draw(bodyData, extraParams); } public bool AsyncConvertUrl(UUID id, string url, string extraParams) @@ -109,10 +104,7 @@ namespace OpenSim.Region.CoreModules.Scripting.VectorRender public bool AsyncConvertData(UUID id, string bodyData, string extraParams) { // XXX: This isn't actually being done asynchronously! - bool reuseable; - byte[] data = ConvertData(bodyData, extraParams, out reuseable); - - m_textureManager.ReturnData(id, data, reuseable); + m_textureManager.ReturnData(id, ConvertData(bodyData, extraParams)); return true; } @@ -191,7 +183,7 @@ namespace OpenSim.Region.CoreModules.Scripting.VectorRender #endregion - private byte[] Draw(string data, string extraParams, out bool reuseable) + private IDynamicTexture Draw(string data, string extraParams) { // We need to cater for old scripts that didnt use extraParams neatly, they use either an integer size which represents both width and height, or setalpha // we will now support multiple comma seperated params in the form width:256,height:512,alpha:255 @@ -334,6 +326,7 @@ namespace OpenSim.Region.CoreModules.Scripting.VectorRender Bitmap bitmap = null; Graphics graph = null; + bool reuseable = false; try { @@ -396,7 +389,8 @@ namespace OpenSim.Region.CoreModules.Scripting.VectorRender e.Message, e.StackTrace); } - return imageJ2000; + return new OpenSim.Region.CoreModules.Scripting.DynamicTexture.DynamicTexture( + data, extraParams, imageJ2000, new Size(width, height), reuseable); } finally { diff --git a/OpenSim/Region/CoreModules/ServiceConnectorsOut/Grid/Tests/GridConnectorsTests.cs b/OpenSim/Region/CoreModules/ServiceConnectorsOut/Grid/Tests/GridConnectorsTests.cs index b286d17..57ae549 100644 --- a/OpenSim/Region/CoreModules/ServiceConnectorsOut/Grid/Tests/GridConnectorsTests.cs +++ b/OpenSim/Region/CoreModules/ServiceConnectorsOut/Grid/Tests/GridConnectorsTests.cs @@ -43,7 +43,7 @@ using OpenSim.Tests.Common; namespace OpenSim.Region.CoreModules.ServiceConnectorsOut.Grid.Tests { [TestFixture] - public class GridConnectorsTests + public class GridConnectorsTests : OpenSimTestCase { LocalGridServicesConnector m_LocalConnector; private void SetUp() diff --git a/OpenSim/Region/CoreModules/World/Archiver/Tests/ArchiverTests.cs b/OpenSim/Region/CoreModules/World/Archiver/Tests/ArchiverTests.cs index 5deaf52..904110e 100644 --- a/OpenSim/Region/CoreModules/World/Archiver/Tests/ArchiverTests.cs +++ b/OpenSim/Region/CoreModules/World/Archiver/Tests/ArchiverTests.cs @@ -51,7 +51,7 @@ using RegionSettings = OpenSim.Framework.RegionSettings; namespace OpenSim.Region.CoreModules.World.Archiver.Tests { [TestFixture] - public class ArchiverTests + public class ArchiverTests : OpenSimTestCase { private Guid m_lastRequestId; private string m_lastErrorMessage; diff --git a/OpenSim/Region/Framework/Interfaces/IDynamicTextureManager.cs b/OpenSim/Region/Framework/Interfaces/IDynamicTextureManager.cs index 1a3bcbb..6df5cc2 100644 --- a/OpenSim/Region/Framework/Interfaces/IDynamicTextureManager.cs +++ b/OpenSim/Region/Framework/Interfaces/IDynamicTextureManager.cs @@ -25,6 +25,8 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ +using System; +using System.Drawing; using System.IO; using OpenMetaverse; @@ -33,7 +35,14 @@ namespace OpenSim.Region.Framework.Interfaces public interface IDynamicTextureManager { void RegisterRender(string handleType, IDynamicTextureRender render); - void ReturnData(UUID id, byte[] data, bool isReuseable); + + /// + /// Used by IDynamicTextureRender implementations to return renders + /// + /// + /// + /// + void ReturnData(UUID id, IDynamicTexture texture); UUID AddDynamicTextureURL(UUID simID, UUID primID, string contentType, string url, string extraParams, int updateTimer); @@ -125,11 +134,53 @@ namespace OpenSim.Region.Framework.Interfaces // /// // bool AlwaysIdenticalConversion(string bodyData, string extraParams); - byte[] ConvertUrl(string url, string extraParams); - byte[] ConvertData(string bodyData, string extraParams); + IDynamicTexture ConvertUrl(string url, string extraParams); + IDynamicTexture ConvertData(string bodyData, string extraParams); + bool AsyncConvertUrl(UUID id, string url, string extraParams); bool AsyncConvertData(UUID id, string bodyData, string extraParams); + void GetDrawStringSize(string text, string fontName, int fontSize, out double xSize, out double ySize); } + + public interface IDynamicTexture + { + /// + /// Input commands used to generate this data. + /// + /// + /// Null if input commands were not used. + /// + string InputCommands { get; } + + /// + /// Uri used to generate this data. + /// + /// + /// Null if a uri was not used. + /// + Uri InputUri { get; } + + /// + /// Extra input params used to generate this data. + /// + string InputParams { get; } + + /// + /// Texture data. + /// + byte[] Data { get; } + + /// + /// Size of texture. + /// + Size Size { get; } + + /// + /// Signal whether the texture is reuseable (i.e. whether the same input data will always generate the same + /// texture). + /// + bool IsReuseable { get; } + } } diff --git a/bin/OpenSimDefaults.ini b/bin/OpenSimDefaults.ini index 42b295f..dbd3e3a 100644 --- a/bin/OpenSimDefaults.ini +++ b/bin/OpenSimDefaults.ini @@ -703,6 +703,13 @@ ; Default is false. ReuseDynamicTextures = false + ; If true, then textures generated dynamically that have a low data size relative to their pixel size are not reused + ; This is to workaround an apparent LL 3.3.4 and earlier viewer bug where such textures are not redisplayed properly when pulled from the viewer cache. + ; Only set this to true if you are sure that all the viewers using your simulator will not suffer from this problem. + ; This setting only has an affect is ReuseDynamicTextures = true + ; Default is false + ReuseDynamicLowDataTextures = false + [ODEPhysicsSettings] ; ## -- cgit v1.1 From d2b00749ef71729555d393da7fef1dcdb84f5cbc Mon Sep 17 00:00:00 2001 From: Justin Clark-Casey (justincc) Date: Thu, 6 Sep 2012 23:14:48 +0100 Subject: Add missing DynamicTexture.cs file from last commit --- .../Scripting/DynamicTexture/DynamicTexture.cs | 61 ++++++++++++++++++++++ 1 file changed, 61 insertions(+) create mode 100644 OpenSim/Region/CoreModules/Scripting/DynamicTexture/DynamicTexture.cs diff --git a/OpenSim/Region/CoreModules/Scripting/DynamicTexture/DynamicTexture.cs b/OpenSim/Region/CoreModules/Scripting/DynamicTexture/DynamicTexture.cs new file mode 100644 index 0000000..fce9490 --- /dev/null +++ b/OpenSim/Region/CoreModules/Scripting/DynamicTexture/DynamicTexture.cs @@ -0,0 +1,61 @@ +/* + * Copyright (c) Contributors, http://opensimulator.org/ + * See CONTRIBUTORS.TXT for a full list of copyright holders. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of the OpenSimulator Project nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +using System; +using System.Drawing; +using OpenSim.Region.Framework.Interfaces; + +namespace OpenSim.Region.CoreModules.Scripting.DynamicTexture +{ + public class DynamicTexture : IDynamicTexture + { + public string InputCommands { get; private set; } + public Uri InputUri { get; private set; } + public string InputParams { get; private set; } + public byte[] Data { get; private set; } + public Size Size { get; private set; } + public bool IsReuseable { get; private set; } + + public DynamicTexture(string inputCommands, string inputParams, byte[] data, Size size, bool isReuseable) + { + InputCommands = inputCommands; + InputParams = inputParams; + Data = data; + Size = size; + IsReuseable = isReuseable; + } + + public DynamicTexture(Uri inputUri, string inputParams, byte[] data, Size size, bool isReuseable) + { + InputUri = inputUri; + InputParams = inputParams; + Data = data; + Size = size; + IsReuseable = isReuseable; + } + } +} \ No newline at end of file -- cgit v1.1 From 288baaecaf4933568c53fc052314599d1520bbed Mon Sep 17 00:00:00 2001 From: Justin Clark-Casey (justincc) Date: Fri, 7 Sep 2012 00:46:24 +0100 Subject: Add warning chevrons around the GC.Collect added to Warp3DImageModule in commit 5eb2526 Manually calling GC.Collect() really shouldnt' be necessary and is generally regarded as a bad idea. A GC should occur anyway pretty shortly afterwards. However, can leave this in development code for now to see if it does actually make a significant difference rather than simply doing a GC a little earlier. --- OpenSim/Region/CoreModules/World/Warp3DMap/Warp3DImageModule.cs | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/OpenSim/Region/CoreModules/World/Warp3DMap/Warp3DImageModule.cs b/OpenSim/Region/CoreModules/World/Warp3DMap/Warp3DImageModule.cs index ed9b127..2d762fb 100644 --- a/OpenSim/Region/CoreModules/World/Warp3DMap/Warp3DImageModule.cs +++ b/OpenSim/Region/CoreModules/World/Warp3DMap/Warp3DImageModule.cs @@ -208,6 +208,10 @@ namespace OpenSim.Region.CoreModules.World.Warp3DMap bitmap = ImageUtils.ResizeImage(origBitmap, viewport.Width, viewport.Height); } + // XXX: It shouldn't really be necesary to force a GC here as one should occur anyway pretty shortly + // afterwards. It's generally regarded as a bad idea to manually GC. If Warp3D is using lots of memory + // then this may be some issue with the Warp3D code itself, though it's also quite possible that generating + // this map tile simply takes a lot of memory. GC.Collect(); m_log.Debug("[WARP 3D IMAGE MODULE]: GC.Collect()"); -- cgit v1.1 From 2ec34580ce3807cede97539488237040e1a8a6cc Mon Sep 17 00:00:00 2001 From: BlueWall Date: Fri, 7 Sep 2012 10:13:51 -0400 Subject: Move addin information to CoreModulePlugin.addin.xml Move the addin information from attributes in the source file to the CoreModulePlugin.xml, which is the standard. This will help us automate addin version dependency information when we make new OpenSim releases. --- OpenSim/Region/CoreModules/Asset/FlotsamAssetCache.cs | 6 +----- OpenSim/Region/CoreModules/Asset/Tests/FlotsamAssetCacheTests.cs | 2 +- OpenSim/Region/CoreModules/Resources/CoreModulePlugin.addin.xml | 1 + 3 files changed, 3 insertions(+), 6 deletions(-) diff --git a/OpenSim/Region/CoreModules/Asset/FlotsamAssetCache.cs b/OpenSim/Region/CoreModules/Asset/FlotsamAssetCache.cs index fab489d..4bce416 100644 --- a/OpenSim/Region/CoreModules/Asset/FlotsamAssetCache.cs +++ b/OpenSim/Region/CoreModules/Asset/FlotsamAssetCache.cs @@ -49,12 +49,8 @@ using OpenSim.Region.Framework.Scenes; using OpenSim.Services.Interfaces; -[assembly: Addin("FlotsamAssetCache", "1.1")] -[assembly: AddinDependency("OpenSim", "0.5")] - -namespace Flotsam.RegionModules.AssetCache +namespace OpenSim.Region.CoreModules.Asset { - [Extension(Path = "/OpenSim/RegionModules", NodeName = "RegionModule")] public class FlotsamAssetCache : ISharedRegionModule, IImprovedAssetCache, IAssetService { private static readonly ILog m_log = diff --git a/OpenSim/Region/CoreModules/Asset/Tests/FlotsamAssetCacheTests.cs b/OpenSim/Region/CoreModules/Asset/Tests/FlotsamAssetCacheTests.cs index c91b25f..9276d1a 100644 --- a/OpenSim/Region/CoreModules/Asset/Tests/FlotsamAssetCacheTests.cs +++ b/OpenSim/Region/CoreModules/Asset/Tests/FlotsamAssetCacheTests.cs @@ -35,7 +35,7 @@ using Nini.Config; using NUnit.Framework; using OpenMetaverse; using OpenMetaverse.Assets; -using Flotsam.RegionModules.AssetCache; +using OpenSim.Region.CoreModules.Asset; using OpenSim.Framework; using OpenSim.Region.Framework.Scenes; using OpenSim.Region.Framework.Scenes.Serialization; diff --git a/OpenSim/Region/CoreModules/Resources/CoreModulePlugin.addin.xml b/OpenSim/Region/CoreModules/Resources/CoreModulePlugin.addin.xml index 424e0ab..a09945e 100644 --- a/OpenSim/Region/CoreModules/Resources/CoreModulePlugin.addin.xml +++ b/OpenSim/Region/CoreModules/Resources/CoreModulePlugin.addin.xml @@ -34,6 +34,7 @@ + -- cgit v1.1 From 1f18ce516fe203aaa7a51d3f70d7fff5f6c8a423 Mon Sep 17 00:00:00 2001 From: BlueWall Date: Fri, 7 Sep 2012 11:04:00 -0400 Subject: Move addin information to RegionCombinerModule.addin.xml Move addin information from attributes to RegionCombinerModule.addin.xml to aid in automation of addin dependency tracking. --- .../Region/RegionCombinerModule/RegionCombinerModule.cs | 4 +--- .../Resources/RegionCombinerModule.addin.xml | 14 ++++++++++++++ 2 files changed, 15 insertions(+), 3 deletions(-) create mode 100644 OpenSim/Region/RegionCombinerModule/Resources/RegionCombinerModule.addin.xml diff --git a/OpenSim/Region/RegionCombinerModule/RegionCombinerModule.cs b/OpenSim/Region/RegionCombinerModule/RegionCombinerModule.cs index 3144d76..7a49cd8 100644 --- a/OpenSim/Region/RegionCombinerModule/RegionCombinerModule.cs +++ b/OpenSim/Region/RegionCombinerModule/RegionCombinerModule.cs @@ -39,11 +39,9 @@ using OpenSim.Framework.Console; using OpenSim.Region.Physics.Manager; using Mono.Addins; -[assembly: Addin("RegionCombinerModule", "0.1")] -[assembly: AddinDependency("OpenSim", "0.5")] + namespace OpenSim.Region.RegionCombinerModule { - [Extension(Path = "/OpenSim/RegionModules", NodeName = "RegionModule")] public class RegionCombinerModule : ISharedRegionModule, IRegionCombinerModule { private static readonly ILog m_log = LogManager.GetLogger(MethodBase.GetCurrentMethod().DeclaringType); diff --git a/OpenSim/Region/RegionCombinerModule/Resources/RegionCombinerModule.addin.xml b/OpenSim/Region/RegionCombinerModule/Resources/RegionCombinerModule.addin.xml new file mode 100644 index 0000000..6101e63 --- /dev/null +++ b/OpenSim/Region/RegionCombinerModule/Resources/RegionCombinerModule.addin.xml @@ -0,0 +1,14 @@ + + + + + + + + + + + + + + -- cgit v1.1