aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/bin (unfollow)
Commit message (Collapse)AuthorFilesLines
2013-06-04Update HTTP serverMelanie1-0/+0
2013-04-22Add the enter uuid dialogMelanie1-0/+7
2013-04-22Add the set object owner floater templateMelanie1-0/+8
2013-03-16*Yet another HTTPServer update code changes in OpenSim Libs. * This fixes a ↵teravus3-0/+121
connection close issue by getting rid of the socket references * This adds a connection timeout checker to shutdown poor or evil connections and combats DOS attempts that just connect and make no complete requests and just wait. It also actually implements KeepAlive... instead of just understanding the connection header in the request... you can test by connecting and requesting a keepalive header and sending another request on the same connection. The new timeout checker closes expired keepalive sessions, just make sure you send the request within 70 seconds of connecting or the timeout checker will timeout the connection.
2013-03-14* Updates HttpServer again to re-add the code that closes the stream and ↵teravus2-0/+0
connection when It's done sending. Be on the lookout for an old linux/mono bug where the client doesn't get the last bit of the stream before it is disconnected!. Code on opensim-libs. All tests pass.. HttpServer's internal tests pass.. but just a bad feeling. More people should test :)
2013-03-12Add DisableInterRegionTeleportCancellation option in [EntityTransfer] ↵Justin Clark-Casey (justincc)2-0/+12
section of OpenSim.ini. False by default. This option allows the simulator to specify that the cancel button on inter-region teleports should never appear. This exists because sometimes cancellation will result in a stuck avatar requiring relog. It may be hard to prevent this due to the protocol design (the LL grid has the same issue) In small controlled grids where teleport failure is practically impossible it can be better to disable teleport cancellation entirely.
2013-03-10Update comment about setting physics=BulletSimN as the C# BulletRobert Adams1-2/+1
version has been wrapped into one BulletSim and the physics engine selection is now done as specified in OpenSimDefaults.ini.
2013-03-07One more comment inconsistency fixed.Diva Canto1-1/+1
2013-03-07Fixed inconsistency in comments. Thanks Ai Austin.Diva Canto1-8/+8
2013-03-04* Update LibOMV to f8f8e616b37a7ea22b7922b2331999bc06725bf9teravus3-0/+0
* Add zero length blocks to the new packet blocks to remain compatible with older viewers and avoid a NullRef when _packets_.cs calls the Length parameter.. which adds up the Length property all of the blocks.
2013-03-04GridUserService was missing from [Gatekeeper]Diva Canto1-0/+1
2013-03-02Added existance and default value for [XEngine]MinTimerInterval to ↵Robert Adams1-0/+4
OpenSimDefaults.ini
2013-03-02Move AllowedClients and BannedClients section to new [AccessControl] section ↵Justin Clark-Casey (justincc)1-2/+6
in OpenSim.ini from [Startup] This change also corrects the setting names - they were actually wrong (though the text in {} was correct). If there are settings in [Startup] they will continue to be used and anything there will override settings in [AccessControl]
2013-03-02Revert "Removed more vars from [Startup]. I think these were already moved ↵Justin Clark-Casey (justincc)1-0/+20
elsewhere, because I can't find any reference to them in the code." This reverts commit efa722786509bd8e02e23f11da974b4282dbd185.
2013-03-01Moved permissions config vars out of [Startup] into [Permissions]. Backwards ↵Diva Canto2-92/+93
compatible ([Startup] still being looked up), but please update your configs sometime soon.
2013-03-01Removed more vars from [Startup]. I think these were already moved ↵Diva Canto1-20/+0
elsewhere, because I can't find any reference to them in the code.
2013-02-28Robust.HG.ini.example updated to get an [Hypergrid] section too.Diva Canto1-14/+15
2013-02-27Moved the HG default variables out of [Startup] and into their own section ↵Diva Canto3-17/+41
[Hypergrid] in *Common.ini.example. Backwards compatible for now.
2013-02-27Do not have the Freeswitch connector on by default in Robust ini example files.Justin Clark-Casey (justincc)2-2/+4
This is not widely used (may even be currently broken), only allows very poor quality voice (not the fault of FreeSwitch) and requires a complicated Freeswitch setup. Having it on but not configured results in spurious warnings in the logs
2013-02-27Improve description of GenerateMapTiles config optionJustin Clark-Casey (justincc)1-7/+8
2013-02-27Add documentation on default or Warp3D image module choice to ↵Justin Clark-Casey (justincc)1-0/+6
OpenSim.ini.example. As before, default is MapImageModule. Thanks to Ai Austin for pointing out this omission.
2013-02-25Move map related settings from [Startup] to a new [Map] section in OpenSim.iniJustin Clark-Casey (justincc)2-52/+53
Existing map settings in [Startup] will continue to work, and if present will override anything in [Map] However, the proper place for such settings would now be [Map] This is to reduce the use of [Startup] as a bag for non-generic settings which should really go in sections, in common with other settings. This commit also extends Diva's previous work to allow a default setting to be given when looking at multiple sections for settings.
2013-02-25Missing var in [LoginService] for HG Robust.Diva Canto1-0/+1
2013-02-23More clarification on the [Groups] sectionDiva Canto1-0/+1
2013-02-23Further clarification on the same spot.Diva Canto1-0/+1
2013-02-23Improved documentation of Groups section.Diva Canto1-2/+6
2013-02-21Err.. wrong dll name for groups in Robust.HG.ini.exampleDiva Canto2-1/+3
2013-02-21Minor formatting cleanup. No changes.Diva Canto1-12/+12
2013-02-21Simplification of HG configs: HomeURI and GatekeeperURI now are defined as ↵Diva Canto3-30/+74
default under [Startup]. They can then be overwritten in the other sections (but probably shouldn't). I kept the existing code for backwards compatibility, so this should not cause any breaks from people's current configurations. But people should move to have these 2 vars under [Startup] -- see OpenSim.ini.example and Robust.HG.ini.example. And yes, both names now end with "URI" for consistency.
2013-02-20Add information about MinLoginLevel to example ini filesJustin Clark-Casey (justincc)2-1/+11
2013-02-19Previous build failed. Checking in a dummy change to see if the fail persists.Diva Canto1-3/+3
2013-02-19First commit of Diva Groups. The Data bits went to OpenSim.Data core, the ↵Diva Canto3-15/+41
rest to Addons.Groups.dll.
2013-02-19Offline IM: moved the Data and MySQL bits to the corresponding places in ↵Diva Canto3-5/+3
core, so that it will be easier to plugin a SQLite backend, if anyone is interested in doing that.
2013-02-18Donating Diva OfflineIM as an addon in a single dll, OpenSim.Addons.OpenSim.dllDiva Canto3-15/+22
2013-02-17BulletSim: add calls for creating all the different Bullet constraint types.Robert Adams4-0/+0
Updated the DLLs and SOs and code for BulletXNA to create the types. All the detailed control calls are not all in place yet.
2013-02-12BulletSim: fix density since the simulator/viewer track density in aRobert Adams4-0/+0
funny unit that is 100 times real density (default 1000). Fix avatar drifting slowly when stationary flying. Fix for physical prims getting corrected for being under terrain when it was just its geometric center that was below terrain. Add PreUpdatePropertyAction allowing plugable modifiction of phys parameters returned from Bullet. Fix an exception setting GravityMultiplier on initialization. Update DLLs and SOs for good measure (no functional change).
2013-02-12Replaced Ionic.Zip.dll with a new one that fixes a bug in it. DotNetZip ↵Diva Canto1-0/+0
(from which Ionic.Zip.dll is derived) is now a fork in opensim-libs, forked from 1.9.1.8 and added that simple bug fix.
2013-02-08BulletSim: add parameter to set global contact breaking threshold. Update ↵Robert Adams4-0/+0
DLLs and SOs for setting same.
2013-02-08Adds size limits to JsonStore. Adds a separate configurationMic Bowman1-0/+4
variable to enable binding to dynamic attributes.
2013-02-07This is the final commit that enables the Websocket handlerteravus2-0/+0
2013-02-06minor: Add explanation of MaptileStaticUUID setting in Regions.ini.exampleJustin Clark-Casey (justincc)1-0/+4
2013-02-05BulletSim: make removing zero width triangles from meshes optionalRobert Adams2-0/+0
and, for the moment, default to 'off'.
2013-02-05BulletSim: remove degenerate triangles from meshes. This fixes theRobert Adams1-14/+2
invisible barriers in sculptie doorways (Mantis 6529). Bump up level-of-detail for physical meshes to 32 (the max). This fixes the invisible barriers that showed up in prim cut arches. NOTE: the default LOD values are removed from OpenSimDefaults.ini. If you don't change your OpenSimDefaults.ini, you will continue to see the arch problem.
2013-02-05BulletSim: rework some parameter setting implementation moving functionality ↵Robert Adams4-0/+0
that was in BSScene to BSParam. Remove unused parameters that were passed to the unmanaged code. Update DLLs and SOs for the new param block.
2013-02-05We're not really done here.. but we're getting there. Socket Read is ↵teravus3-2901/+2901
working.. Still have to do Header.ToBytes and compose a websocket frame with a payload.
2013-02-04Remove [XMLRPC] section I added by accident to the top of ↵Justin Clark-Casey (justincc)1-15/+0
OpenSimDefaults.ini in previous commit 95883282
2013-02-03Changing OpenSimDefaults back to defaultteravus1-1/+1
2013-02-03Adds the ability to load more then one IClientNetworkServer thereby allowing ↵teravus1-1/+1
additional client stacks. Use comma separated values in clientstack_plugin in your config.
2013-02-02Stop exceptions being thrown if GenerateMapTiles = false but no static map ↵Justin Clark-Casey (justincc)2-3/+18
tile has been set. Do more informative warn instead.
2013-01-30Add config option to Regions.ini for new maptile featureBlueWall1-0/+1
generated by cgit v1.1 at 2024-10-20 08:46:09 +0000