aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/bin/OpenSimDefaults.ini (unfollow)
Commit message (Collapse)AuthorFilesLines
2012-11-11remove entry OpenGridProtocol in OpenSimDefaults.ini - module was deletedPixelTomsen1-10/+0
Signed-off-by: Diva Canto <diva@metaverseink.com>
2012-11-10One more module: EventQueueGetModule. Also making it non-optional for this dll.Diva Canto1-3/+0
2012-10-29refactoring to use assembly:classname style of configurationSignpostMarv1-2/+2
2012-10-29Renaming module back to SoundModule as the hypothetical plan was to make ↵SignpostMarv1-3/+2
another module using the shared region module interface, but this was pointed out by Melanie_T to be mostly pointless.
2012-10-29tweaking configuration logic so that the INonSharedRegionModule will load by ↵SignpostMarv1-0/+8
default
2012-10-20Add experimental [Groups] MessageOnlineUsersOnly option for Flotsam XmlRpc ↵Justin Clark-Casey (justincc)1-0/+5
groups. This retrieves and caches information from the PresenceService to only send messages to online users. This is reported to much improve performance for large groups where most users are offline. Cache is 20 seconds to balance requests against users not receiving messages until cache updates. This is an alternative to an approach where login/logout notification is sent directly from simulator to groups service. However, I'm not convinced that this PresenceService approach is actually better. Needs more thought.
2012-10-16Add optional pool for the UDPPacketBuffer objects that handle all incoming ↵Justin Clark-Casey (justincc)1-1/+5
UDP data. Even when an avatar is standing still, it's sending in a constant stream of AgentUpdate packets that the client creates new UDPPacketBuffer objects to handle. This option pools those objects. This reduces memory churn. Currently off by default. Works but the scope can be expanded.
2012-10-09av_av_collisions_off = false OdePhysics Settings in OpenSimDefaults.ini - ↵teravus1-0/+3
No Avatar Avatar Collisions. This causes avatar to be able to walk through each other as if they're ghosts but still interact with the environment.
2012-10-09Add config option to plant avatar where they are reducing avatar avatar ↵teravus1-0/+6
'pushability' av_planted see OpenSimDefaults.ini. Use when you have unruly visitors that rudely push each other around. Still allows a small amount of movement based on the avatar movement PID controller settings. You can increase the spring tension in the PID controller and really prevent any movement if you would like.
2012-10-04Make the asset retrieval concurrency a config switch. The current valueMic Bowman1-0/+4
of 30 is still hanging badly on some mono versions. The switch defaults to 30 to preserve current behavior.
2012-09-27BulletSim: btGhostObjects working to make 'volume detect' work.Robert Adams1-3/+3
Rearrangement and cleanup of shape collection code. Much more readable. Enabling and use of collision filters and masks. Addition of ID to body creation BulletSimAPI calls so always set in shape for collision reporting. Change default of ShouldSplitSimulationIslands and ShouldRandomizeSolverOrder from 'false' to 'true'. When 'false', this suppresses NO_CONTACT_RESPONSE which makes volume detect fail.
2012-09-28Comment out unused RestPlugins text in OpenSimDefaults.iniJustin Clark-Casey (justincc)1-24/+25
2012-09-27Removed the bits about the TOSModule. That module doesn't go into core. ↵Diva Canto1-4/+0
WARNING: migration on GridUser withdrawn too, but left the migration number there.
2012-09-27Add MaxPrimsUndo config setting to [Startup] section of OpenSim.ini.Justin Clark-Casey (justincc)1-0/+4
This controls how many undo steps the simulator will store for each prim. Default is now 20 rather than 5 as it briefly was. The default number could be increased through this is a memory tradeoff which will scale with the number of prims in the sim and level of activity.
2012-09-25TOS module. WARNING: migration in GridUser table.Diva Canto1-0/+4
2012-09-20Make ResendAppearanceUpdates = true by default in [Appearance] in ↵Justin Clark-Casey (justincc)1-2/+1
OpenSimDefaults.ini. This resends appearance uuids to avatars in the scene once a minute. I have seen this help in the past resolve grey appearance problems where viewers have for unknown reasons sometimes ignored the packet. The overhead is very small since only the UUIDs are sent - the viewer then requests the texture only if it does not have it cached. This setting will not help with cloudy avatars which are usually due to the viewer not uploading baked texture data or uploading something that isn't valid JPEG2000
2012-09-18Fix some inconsistencies in configurartion: NonPhys primsBlueWall1-2/+2
Fix inconsistencies between configuration parameter names and their description names. Changing the configuration parameters for non physical prim size min-max from Nonphys* to NonPhys*. Please update your OpenSim.ini and Regions.ini to reflect these changes.
2012-09-12Fix indentation and issues where tabs were used instead of spaces in commit ↵Justin Clark-Casey (justincc)1-3/+3
783ee949
2012-09-09implementing per-region configuration of limits on the number of prims one ↵SignpostMarv1-0/+4
can have in a linkset Applied with changes - patch was based on a repo different from core Signed-off-by: Melanie <melanie@t-data.com>
2012-09-06If reusing dynamic textures, do not reuse small data length textures that ↵Justin Clark-Casey (justincc)1-0/+7
fall below current viewer discard level 2 thresholds. Viewer LL 3.3.4 and before sometimes fail to properly redisplay dynamic textures that have a small data length compared to pixel size when pulled from cache. This appears to happen when the data length is smaller than the estimate discard level 2 size the viewer uses when making this GetTexture request. This commit works around this by always regenerating dynamic textures that fall below this threshold rather than reusing them if ReuseDynamicTextures = true This can be controlled by the [Textures] ReuseDynamicLowDataTextures config setting which defaults to false.
2012-08-30Make ReuseDynamicTextures an experimental config setting in [Textures]. ↵Justin Clark-Casey (justincc)1-0/+11
Default is false, as before. If true, this setting reuses dynamically generated textures (i.e. created through osSetDynamicTextureData() and similar OSSL functions) where possible rather than always regenerating them. This results in much quicker updates viewer-side but may bloat the asset cache (though this is fixable). Also, sometimes issue have been seen where dynamic textures do not transfer to the viewer properly (permanently blurry). If this happens and that flag is set then they are not regenerated, the viewer has to clear cache or wait for 24 hours before all cached uuids are invalidated. CUrrently experimental. Default is false, as before.
2012-08-17BulletSim: add parameters and functionality to specify the meshRobert Adams1-0/+3
level of detail for large meshes. Remove parameter and code for DetailLog (conditional logging into regular log file).
2012-08-15BulletSim: add physics logging parameters to OpenSimDefaults.ini. Remove ↵Robert Adams1-12/+17
trailing semis from some the of the value definitions.
2012-08-08BulletSim: add avatar code to keep avatars from ending up trapped under the ↵Robert Adams1-1/+1
terrain
2012-08-03Consolidate PersistBakedTextures, DelayBeforeAppearanceSend and ↵Justin Clark-Casey (justincc)1-19/+14
DelayBeforeAppearanceSave into [Appearance] section from [Startup] config section so that all appearance settings are in the same place and not in the startup bucket. All these settings are in OpenSimDefaults.ini only. If you are using them then please adjust your OpenSim.ini
2012-08-03Move previously unadvertised SendPeriodicAppearanceUpdates setting from ↵Justin Clark-Casey (justincc)1-1/+8
[Startup] to [Appearance] config section. Add description and default of false (as before) to OpenSimDefaults.ini If set to true, this config switch will resend avatar appearance information (a small amount of UUID data, not the baked textures themselves) to other avatars in the sim every 60 seconds. For me, this has helped with situations where avatars appear persistently grey - the LL viewer sometimes did not appear to request assets the first time the appearance data was sent. However, this switch will not help with other appearance failure situations (e.g. failure to bake assets). This setting is experimental but will not have any significant impact on the simulator if turned to true.
2012-08-02BulletSim: Debugging log statements added. Reduced size of updata buffer ↵Robert Adams1-1/+1
trying to find a corrupted memory problem. Update DLL and SO.
2012-07-26BulletSim: refactor all the linkset logic out of the prim classRobert Adams1-2/+2
and into its own class. The BulletSim data structures track individual prims as linksets of 1 so most of the prim code is not different between a linked and unlinked object.
2012-07-25BulletSim: add parameters for setting linkset constraint factorsRobert Adams1-0/+6
2012-06-16Implement max_external_urls_per_simulator setting in [LL-Functions] to allow ↵Justin Clark-Casey (justincc)1-1/+3
configuration of how many urls can be set up by llRequestURL() Defaults remains as 100. This setting is per simulator instead of per region due to how the url script module is structured.
2012-06-12Add the updated OpenSimDefaults.ini for the prior timer_Interval patch.BlueWall1-0/+4
2012-06-09Add documentation to AllowGodFunctions setting in [LL-Functions]Justin Clark-Casey (justincc)1-0/+2
2012-06-05Mantis 4597 AgentPaused packet is ignored.Talun1-0/+13
The packet was actually being handled but not acted on. This change extends the default timeout for paused clients to 5 minutes and makes both the paused and non-paused timeout periods configurable.
2012-05-31Add an optional mechanism for physics modules to collect and return ↵Justin Clark-Casey (justincc)1-11/+19
arbitrary stats. If active, the physics module can return arbitrary stat counters that can be seen via the MonitoringModule (http://opensimulator.org/wiki/Monitoring_Module) This is only active in OdeScene if collect_stats = true in [ODEPhysicsSettings]. This patch allows OdeScene to collect elapsed time information for calls to the ODE native collision methods to assess what proportion of time this takes compared to total physics processing. This data is returned as ODENativeCollisionFrameMS in the monitoring module, updated every 3 seconds. The performance effect of collecting stats is probably extremely minor, dwarfed by the rest of the physics code.
2012-05-23Environment Module - allows Environment settings for Viewer3 warning: ↵PixelTomsen1-1/+2
includes database region store migrations for mssql, mysql, sqlite enable/disable this module: Cap_EnvironmentSettings = "localhost" (for enable) Cap_EnvironmentSettings = "" (for disable) at ClientStack.LindenCaps section (OpenSimDefaults.ini file) or owerwrite in OpenSim.ini mantis: http://opensimulator.org/mantis/view.php?id=5860 Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2012-05-19Enable FetchInventoryDescendents2 and FetchInventory2 caps by default. This ↵Justin Clark-Casey (justincc)1-5/+4
appears to be required now for LL 3.3.1 to work properly. Without this, LL 3.3.1 continually pushes LLInventoryModelFetchDescendentsResponder::error 499 to its log. This cap will be ignored by older viewers - UDP inventory will work normally.
2012-04-25Add a configuration switch to turn on/off the use of the trashMic Bowman1-0/+7
folder when deleting objects from a scene. The use of the trash folder causes assets to be created and stored everytime you delete an object from the scene (slows down the delete and adds mostly useless assets to your database). Default is on (use the trash folder) which is the standard behavior.
2012-04-17add configuration for jsonstore module, disabled by defaultMic Bowman1-0/+6
2012-04-10Correct max_listeners_per_region in OpenSimDefaults.ini to ↵Justin Clark-Casey (justincc)1-1/+1
max_listens_per_region Value for this setting in OpenSimDefaults.ini (1000) is same as setting in code (1000) so this should have no effect Thanks to Ovi Chris Rouly for pointing this out.
2012-03-27User level based restrictions for HyperGrid teleports, asset uploads, group ↵Snoopy Pfeffer1-0/+12
creations and getting contacted from other grids. Incoming HyperGrid teleports can also be restricted to local users.
2012-03-26BulletSim: update BulletSim binaries and configuration fixing a crash which ↵Robert Adams1-1/+2
happens when there are more than a few hundred physical objects.
2012-03-23BulletSim: change default of shouldDisableContactPoolDynamicAllocation from ↵Robert Adams1-1/+1
False to True. It seems that collisions don't happen well when it is False (things fall through terrain).
2012-03-23BulletSim: add a bunch of internal Bullet configuration parameters to ↵Robert Adams1-0/+9
OpenSimDefaults.ini and the code.
2012-03-23BulletSim: Add AvatarRestitution parameter. Centralize computation of ↵Robert Adams1-1/+2
buoyancy for flying. Tweek avatar default friction and resititution
2012-03-23BulletSim: add some new runtime setable parameters to match the dll.Robert Adams1-1/+1
2012-03-23Add information about SendPeriodicAppearanceUpdates to OpenSimDefaults.ini ↵Justin Clark-Casey (justincc)1-0/+5
for now. Default remains false.
2012-03-22Added new simple_build_permissions config to the .ini and .example files.Diva Canto1-0/+8
2012-03-22Revert "Simple build permissions feature. NOTE: EXPERIMENTAL, DISABLED BY ↵Melanie1-7/+0
DEFAULT. Turns out that this can't be expressed by cascading Permission modules, so I did it as per this patch." This reverts commit 6146e7ef258b10888ad7464b72b75cca701e02c9.
2012-03-22Simple build permissions feature. NOTE: EXPERIMENTAL, DISABLED BY DEFAULT. ↵Diva Canto1-0/+7
Turns out that this can't be expressed by cascading Permission modules, so I did it as per this patch.
2012-03-21BulletSim: Add AvatarRestitution parameter. Centralize computation of ↵Robert Adams1-1/+2
buoyancy for flying. Tweek avatar default friction and resititution