aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/OpenSim/Region/ScriptEngine/XEngine (unfollow)
Commit message (Collapse)AuthorFilesLines
2012-12-17Extend default 1 second wait for event completion to other thread script ↵Justin Clark-Casey (justincc)1-1/+1
reset (as called by llResetOtherScript()). As with script stop (via llDie()) aborting other scripts event threads, llResetOtherScript() can also abort any current event thread on another script. On mono 2.6, 2.10 and possibly later this may cause locking problems in certain code areas. This commit reuses the recently introduced [XEngine] WaitForEventCompletionOnScriptStop to make this a 1 sec timeout, rather than 0 secs.
2012-12-13Add WaitForEventCompletionOnScriptStop [XEngine] config param to ↵Justin Clark-Casey (justincc)1-10/+24
OpenSimDefaults.ini to allow change of the wait time for an event to complete on script removal before aborting its thread Default is 1000, as has previously been the case. This parameter exists for further debug work concerning mono 2.10 crashes that may be related to locks not being removed on Thread.Abort
2012-12-12Add "debug script log" command to allow setting a numeric debug level on ↵Justin Clark-Casey (justincc)1-5/+48
individual IScriptInstances for debugging purposes. Current, state changes and event fires can be logged for individual scripts. See command help for more details.
2012-12-12Add asset id to "show script" and "show scripts" command output to make it ↵Justin Clark-Casey (justincc)1-0/+1
easier to extract and inspect the script's asset via "dump asset"
2012-12-05Add engine-wide events queued and events processed numbers to output of ↵Justin Clark-Casey (justincc)1-1/+14
"xengine status" console command. For debugging purposes.
2012-12-05Add IScriptInstance.EventsQueued to match EventsProcessed instead of asking ↵Justin Clark-Casey (justincc)1-4/+1
callers to lock and directly inspect the EventQueue
2012-12-05For now, sort "show scripts" output in descending order sorted by events ↵Justin Clark-Casey (justincc)1-3/+21
processed. For debug purposes - should later add options to allow different sorting or show only highest 10, etc.
2012-12-05Add IScriptInstance.EventsProcessed stat so that we can record this ↵Justin Clark-Casey (justincc)1-0/+1
information and display in "show scripts" for debug purposes
2012-12-05In XEngine.DoOnRezScript() use Culture.SetCurrentCulture() instead of ↵Justin Clark-Casey (justincc)1-2/+1
constructing a new CultureInfo separately
2012-12-05On XEngine.ProcessEventHandler(), instead of creating a new CultureInfo on ↵Justin Clark-Casey (justincc)1-2/+1
every call use the single one set by Culture.SetCurrentCulture() This is slightly different in that SetCurrentCulture() does not use overridden settings if the system culture matches en-US but some settings there have been changed. This is what we want - we do not want to use any system overriden settings.
2012-11-24Consistenly make NUnit test cases inherit from OpenSimTestCase which ↵Justin Clark-Casey (justincc)1-1/+1
automatically turns off any logging enabled between tests
2012-11-14Added AssemblyInfos to every dll in the OpenSim.Region namespace.Diva Canto1-0/+33
2012-10-31Make "show object part" command correctly display script status.Justin Clark-Casey (justincc)1-2/+8
Uses new IEntityInventory.TryGetScriptInstanceRunning() Makes it clearer that TaskInventoryItem.ScriptRunning cannot be used as it is temporary and not updated.
2012-10-02Add money event routing to the script engine.Melanie1-0/+3
2012-10-02Send money() events to the clicked prim. Reverting a change I made over a ↵Melanie1-1/+1
year ago.
2012-08-25Log initial script startup info notice when xengine actually starts to do ↵Justin Clark-Casey (justincc)1-2/+4
this for debugging purposes, rather than before it actually starts to do this.
2012-08-23If a script state save fails for some reason on shutdown/region removal, get ↵Justin Clark-Casey (justincc)1-2/+25
xengine to spit out some useful information and continue to save other script states
2012-08-18constructor means not having to manually refer to individual propertiesSignpostMarv2-4/+4
2012-08-18refactoring for Vector3 operator & constructor tweaksSignpostMarv2-16/+8
2012-08-17minor: Make xengine debug message on script load a scripting loading message ↵Justin Clark-Casey (justincc)1-7/+9
instead. This is more useful if compilation fails due to an uncatchable exception since we know what was being compiled.
2012-07-25Make SceneManager.OnRegionsReadyStatusChange event available.Justin Clark-Casey (justincc)1-1/+1
This is fired when all regions are ready or when at least one region becomes not ready. Recently added EventManager.OnRegionReady becomes OnRegionReadyStatusChange to match OnLoginsEnabledStatusChange
2012-07-18Stop the 15 second initial script compile wait if a script is being rezzed ↵Justin Clark-Casey (justincc)1-0/+4
on a previously empty region.
2012-07-17Make the scrpt running flag work properlyMelanie1-0/+16
2012-07-16Revert "Fix script "Running" behavior"Melanie1-7/+0
A better solution using the already present flags must be found. This reverts commit 6d3ee8bb39d47ed7b32e8905fa0b2fc31c5a9f80.
2012-07-11Where possible, use the system Encoding.ASCII and Encoding.UTF8 rather than ↵Justin Clark-Casey (justincc)1-1/+1
constructing fresh copies. The encodings are thread-safe and already used in such a manner in other places. This isn't done where Byte Order Mark output is suppressed, since Encoding.UTF8 is constructed to output the BOM.
2012-07-11Allow XEngine StartDelay to be configured in the [XEngine] config section.Justin Clark-Casey (justincc)2-2/+10
This is only currently meant for use by regression tests that don't have any issues if XEngine is started up quickly, since no other operations will be occuring simultaneously. Therefore, this is not yet documented externally.
2012-07-11Remove WorldComm module from the regression TestCompileAndStartScript() ↵Justin Clark-Casey (justincc)1-4/+1
since the infrastructure no longer fails if this module isn't present, at least on the tested codepaths
2012-07-11Add regression TestDetachScriptedAttachmentToInventory()Justin Clark-Casey (justincc)1-2/+2
This currently only does a relatively crude check for a ScriptState node in the serialized xml
2012-07-10If a script is being stopped manually, then give the scriptpool thread 1 ↵Justin Clark-Casey (justincc)1-1/+5
second to finish normally before forcibly aborting. This is to avoid the worst of the problems in mono 2.6, 2.10 where an aborted thread does not always release all its locks. This very short grace period is identical to the existing behaviour when a script is removed from the scene.
2012-07-01Add preservation of running state of scripts when drag-copying.Melanie1-0/+12
2012-06-28If rest of first line after colon is blank then still warn about running in ↵Justin Clark-Casey (justincc)1-11/+18
XEngine if engine specified does not exist. This is to take account of situations where the user was intending to specify a script engine using colon using its default language. This probably generates few false positive as scripts are less likely to end a first line colon with a comment for other purposes.
2012-06-28Avoid reporting false positives when a colon is in a comment in the first ↵Justin Clark-Casey (justincc)1-17/+41
line of a script where the user was not trying to select a different script engine. This works by only posting the "Selected engine unavailable" message if we're falling back on XEngine and the language is one handled by XEngine. In cases where the language is not handled or not allowed, the user will still be notified by the later compiler error. This avoids the overwhelming majority of false positives where the first line contains a : for other reasons (e.g. source control systems, vim settings, etc.) Ultimately, I think it would be better to detect script language/engine with a mechanism that didn't just rely on : detection (e.g like #! in unix scripts).
2012-06-28minor: reuse colon index calculation in XEngine.OnRezScript. The index if a ↵Justin Clark-Casey (justincc)1-2/+2
colon is found on the first line will always be the same as for the whole script.
2012-06-23Fix script "Running" behaviorBlueWall1-0/+7
Unchecking "Running" box in script editor now persists. This fixes http://opensimulator.org/mantis/view.php?id=6057
2012-06-22Avoid race condition between m_PrimObjects iteration in ↵Justin Clark-Casey (justincc)1-14/+14
XEngine.PostObjectEvent and places where the list is modified by extending the m_PrimObjects lock.
2012-06-22If starting scripts on initial sim start, provide INFO level log feedback ↵Justin Clark-Casey (justincc)1-6/+10
each time 50 scripts have been started. This is to provide an indication of what's happening now that the default isn't to report every single script start. Changes XEngine logging level in OpenSim.exe.config from WARN to INFO.
2012-06-22Eliminate unnecessary extra call to TriggerEmptyScriptCompileQueue in ↵Justin Clark-Casey (justincc)1-9/+2
XEngine.DoOnRezScriptQueue() The later invocation of this function will happen on an empty compile queue.
2012-06-20Comment out recently added log message detailing number of scripts started ↵Justin Clark-Casey (justincc)1-2/+2
when compile queue empties for now
2012-06-20Raise some IO associated Exception logging in XEngine to error level, in ↵Justin Clark-Casey (justincc)1-7/+5
line with other similar cases. Remove more unnecessary Close() calls - these are being triggered by the Dispose() called when exiting the using statement for these sdk io objects.
2012-06-20Log how many scripts are candidates for starting and how many are actually ↵Justin Clark-Casey (justincc)1-4/+60
started. Adds DebugLevel infrastructure to XEngine though currently commented out and unused.
2012-06-19Like the assembly and text files, only write the c#-lsl linemap in ↵Justin Clark-Casey (justincc)1-27/+27
XEngine.SetXMLState() if the trust binaries flag is set. This doesn't affect other locations where the map is written, such as on script compilation.
2012-06-19minor: Add a little more detail to IOException logging in XEngine.SetXMLState()Justin Clark-Casey (justincc)1-11/+14
Also removes superflous Close() commands for statements taking place within using() constructs Also adds some comment out debug log messages for future use.
2012-04-27Add regression test for teleporting an agent between separated regions on ↵Justin Clark-Casey (justincc)1-1/+1
the same simulator. This involves a large amount of change in test scene setup code to allow test scenes to share shared modules SetupScene is now an instance method that requires an instantiation of SceneHelpers, though other SceneHelpers methods are still static May split these out into separate classes in the future.
2012-04-24Minor improvements to loggingOren Hurvitz1-3/+5
Eliminated an extra newline in the console if the log line doesn't contain a category (example of a category: "[ASSETS]").
2012-04-18Fix a logic error in app domain creationMelanie1-1/+1
2012-04-18Don't re-add the assembly resolver for each script if not creating the appdomainMelanie1-4/+8
2012-04-12Mantis 55025 Implement script time.Talun1-34/+48
Signed-off-by: nebadon <michael@osgrid.org>
2012-03-19Stop console command "xengine status" throwing an exception if there are no ↵Justin Clark-Casey (justincc)1-4/+4
scripts in a region. Addresses http://opensimulator.org/mantis/view.php?id=5940
2012-03-16refactor: separate out console and status report generation parts of XEngineJustin Clark-Casey (justincc)1-1/+6
2012-03-16Aggregate script execution times by linksets rather than individual prims.Justin Clark-Casey (justincc)1-3/+2
This is for the top scripts report.