aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/OpenSim/Region/Physics (follow)
Commit message (Collapse)AuthorAgeFilesLines
...
* * Add enough infrastructure code to run an extremely basic and flaky add ↵Justin Clarke Casey2008-11-201-1/+1
| | | | root agent scene test
* Guard against a strange nullref in ODEMelanie Thielker2008-11-191-0/+5
|
* Changed sculpted prim texture scaling method to bilinear to reduce scaling ↵Dahlia Trimble2008-11-161-1/+2
| | | | artifacts
* * minor: remove mono compiler warningsJustin Clarke Casey2008-11-141-1/+1
|
* * refactor: as per a recent opensim-dev thread, rename InnerScene to ↵Justin Clarke Casey2008-11-121-1/+1
| | | | SceneGraph to make it more descriptive of its intended function
* Thank you, idb, for a patch that fixes avatar height calculationMelanie Thielker2008-11-101-3/+4
| | | | | | Our feet will now be above ground
* Enabled SoftERP for the contact structure but not SoftCFM.Charles Krinke2008-11-091-1/+6
| | | | | | A tube on a pole is a bit less "flubbery" so maybe this is the right direction.
* Clean up a few comments.Charles Krinke2008-11-091-11/+3
|
* Clean up the mass < 0 logic a tiny bit whenCharles Krinke2008-11-091-2/+1
| | | | | calculating mass.
* * minor: remove some mono compiler warningsJustin Clarke Casey2008-11-061-1/+1
|
* * minor: Make some 'startup config failed to load' log messages more consistentJustin Clarke Casey2008-11-061-1/+1
|
* Add more vertex normals and UV coordinates. Sync with primmesher.dll forge ↵Dahlia Trimble2008-11-051-49/+123
| | | | project.
* Revert last checkin. Avatars fall through non-physical prims now.Charles Krinke2008-11-011-12/+7
| | | | | | There is more to the solution then just enabling soft_erp and soft_cfm for all d.Contact cases.
* Added soft_cfm and soft_erp to the general "contact" initializationCharles Krinke2008-11-011-7/+12
| | | | | | for physical prim interactions. They were not previously enabled for prim-prim interactions.
* Viewer side normals and UV fixes on profile cuts. Sync with primmesher.dll ↵Dahlia Trimble2008-10-291-49/+59
| | | | forge project.
* * minor: remove mono compiler warningsJustin Clarke Casey2008-10-281-4/+4
|
* some sorely needed extruder code simplification and refactoring, also some ↵Dahlia Trimble2008-10-281-138/+50
| | | | fixes to cut face UV coordinates
* * minor: remove mono compiler warningsJustin Clarke Casey2008-10-271-2/+1
|
* Add end faces when radius setting is non-zeroDahlia Trimble2008-10-241-5/+8
|
* * minor: eliminate some mono compiler warningsJustin Clarke Casey2008-10-241-2/+1
|
* un-double-flipped some double-flipped normals in circular path prim end capsDahlia Trimble2008-10-241-42/+2
|
* Fixed a floating point error accumulation that was causing missing end faces ↵Dahlia Trimble2008-10-241-34/+68
| | | | on some twisted prims
* * Add a config option for filtering collisions. Sometimes, under load, ↵Teravus Ovares2008-10-221-0/+5
| | | | this seems to cause bouncing on really thin flat prim.
* More work in vertex normals and texture UVs. Syncing code with pyov.Dahlia Trimble2008-10-211-18/+328
|
* * minor: remove mono warningsJustin Clarke Casey2008-10-191-1/+1
|
* More progress towards implementing vertex normals - not complete yet.Dahlia Trimble2008-10-191-116/+371
|
* * Changed the dupe collision depth limiter to be slightly more restrictive. ↵Teravus Ovares2008-10-181-3/+3
| | | | (less chance for a dupe)
* * Fix an over compensation for bounciness on flat PrimitiveTeravus Ovares2008-10-172-9/+7
| | | | | | * Implement the linear impulse portion of llPushObject. We should have a lsl compatible implementation of that portion of the push. Angular.. well. still have yet to implement a torque accumulator. * llPushObject respects the region and parcel settings for Restrict Push, it also respects GodMode as is defined in the LSL spec.
* * Adds a lot of stability and performance to the physics engine. The ↵Teravus Ovares2008-10-171-1/+86
| | | | | | | avatar bounces less and things are a bit less explosive. * Additionally, you can probably get more physical prim now together.. though, I think this puts us back on par with where we were in the beginning of the year on number of physical objects. Experiment. Make videos. Send Feedback. Enjoy.
* * minor: get rid of pointless ipeSenderJustin Clarke Casey2008-10-161-0/+1
|
* * Apply http://opensimulator.org/mantis/view.php?id=2401Justin Clarke Casey2008-10-161-0/+1
| | | | | | | * Removes spacers that are also separators in llParseString2List * Thanks idb
* * Releases the inter-region thread synchronization between physics in ODE on ↵Teravus Ovares2008-10-163-6/+7
| | | | | | | | the same instance. * If you are hosting many regions on a single instance, you will probably notice a decrease in region startup time and maybe a slight increase in performance. * Single regions won't notice anything different
* * minor: Oh go on, one more warning. Oooh, you are naughtyJustin Clarke Casey2008-10-151-1/+0
|
* * minor: remove some warningsJustin Clarke Casey2008-10-151-3/+3
|
* * Cleaned up tons of code duplication in ODEPrim Teravus Ovares2008-10-142-313/+235
| | | | | | | | | * Re-enabled the native ODE prim types when possible * Fixed several invalid assumptions in the prim recycle process. * Added better message for 'reused a disposed physicsactor' * Added a way to recover from errors during collision_optimized * Added a way to recover from an error condition where prim_geom wasn't reset properly
* Committing more work towards implementing vertex normals. Also added some ↵Dahlia Trimble2008-10-132-63/+174
| | | | (hopefully) helpful messages for identifying corrupt prims and some fixup code for corrupt profile cut data.
* * Based on user reports, it looks like the OS specific settings have been ↵Teravus Ovares2008-10-131-4/+4
| | | | | | | unified as far as tuning (thank heavens). * If you're experiencing knee bendiness try the windows settings, as the *nix settings seem to now be incorrect. (this update does that, but you may have your own opensim.ini settings active.
* * This updates ODE to the most up-to-date version as of today. 1558Teravus Ovares2008-10-121-0/+1
| | | | | | | | * Mac users, pray to chi11ken to make you a .dylib version * This is semi-tuned and post teravus hack. (Though I didn't apply the terrain pitting fix hack. I'm still deciding if it's necessary as there was a lot of work over the past several months on the heightfield collider. * Please use '--enable-shared --disable-demos --disable-asserts' if you are building your own libode in the configure step. Asserts are pretty much useless for use with .NET * This also updates ODE.NET as, there were some API changes in May that were just added to ODE.NET today.
* removed some more extraneous hidden faces Dahlia Trimble2008-10-121-9/+23
|
* Fixed a missing face on a profile cutDahlia Trimble2008-10-121-4/+23
|
* Optimization: calculation of profile vertex normals is now disabled as default.Dahlia Trimble2008-10-121-14/+102
|
* Eliminate some unnecessary polygonsDahlia Trimble2008-10-111-10/+25
|
* * minor: remove warningsJustin Clarke Casey2008-10-102-25/+25
|
* Some more decruftingDahlia Trimble2008-10-101-108/+30
|
* Some decruftingDahlia Trimble2008-10-101-228/+46
|
* refactoring PrimMesher to add viewer compatable features and some code cleanupDahlia Trimble2008-10-103-91/+283
|
* Cap proxy mesh scale minimum to 0.01 meter for X, Y, and Z terms.Dahlia Trimble2008-10-041-0/+4
|
* Square hollow size in cylinder meshes were a little too small - fixed.Dahlia Trimble2008-10-021-0/+2
|
* Implement the plumbing for llSetVehicleType from the LSLCharles Krinke2008-09-288-0/+55
| | | | | | subroutine down through the physics modules through PhysActor and SceneObjectPart. No connection to the physics simulators.
* Added the plumbing for llSetVehicleRotationParamCharles Krinke2008-09-288-0/+47
| | | | | | in the classes between the LSL implementation and the underlying physics engines.
generated by cgit v1.1 at 2024-10-30 05:23:02 +0000