aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/OpenSim/Region/Physics (unfollow)
Commit message (Collapse)AuthorFilesLines
2009-02-25* minor: Remove most mono compiler warningsJustin Clarke Casey1-1/+1
2009-02-24remove log4net dependency and from PrimMesher.csDahlia Trimble2-7/+18
sync PrimMesher.cs with PrimMesher.dll version 29 on forge
2009-02-22Mantis#3218. Thank you kindly, TLaukkan (Tommil) for a patch that:Charles Krinke7-27/+41
* Added log4net dependency to physxplugin in prebuild.xml. * Added missing m_log fields to classes. * Replaced Console.WriteLine with appropriate m_log.Xxxx * Tested that nant test target runs succesfully. * Tested that local opensim sandbox starts up without errors.
2009-02-20* Upped VersionInfo to 0.6.3 and in the process, changed assemblyinfo to ↵lbsa716-18/+18
0.6.3.* to better track down dll ref and overwrite problems.
2009-02-19* Changed all AssemblyInfo to explicit version 1.0.0.0 to not confuse poor ↵lbsa715-5/+5
poor Nant. We probably should take the opportunity to let the non-module bins reside in their /bin/Debug dirs later.
2009-02-15This started as way to correct Mantis #3158, which I believe should be fixed ↵diva6-7/+12
now. The flying status was temporarily being ignored, which caused the avie to drop sometimes -- there was a race condition. In the process it also fixes that annoying bug in basic physics where the avie would drop half-way to the ground upon region crossings (SetAppearance was missing). Additionally, a lot of child-agent-related code has been cleaned up; namely child agents are now consistently not added to physical scenes, and they also don't have appearances. All of that happens in MakeRoot, consistently.
2009-02-15Set sculpt map alpha to 255 prior to scaling and meshing. Addresses Mantis #3150Dahlia Trimble1-0/+8
2009-02-13Add copyright headers. Minor formatting cleanup. Fix some compiler ↵Jeff Ames2-3/+3
warnings. Fix some m_log declarations.
2009-02-12Thanks Kitto Flora for a patch that adds automatic min fly height to ODE - ↵Dahlia Trimble2-9/+21
Mantis #3134
2009-02-08* Some minor cleanupTeravus Ovares1-30/+30
* sealed OdeScene
2009-02-08Reverts patch from tuco/mikkopa/sempuki mantis #3072Teravus Ovares7-225/+216
2009-02-08* Limit the total number of joints created per frame to the maximum possible ↵Teravus Ovares1-12/+53
without causing a stack collision. * This fixes crashing on large sets of physical prims because of stack collisions (assuming you follow the directions on linux for starting ode with ulimit). After the maximum joints are created, objects will start to fall through the ground and be disabled. Not the best solution, but it's better then a crash caused by a stack collision with the process exceeding the maximum available memory/recursions per thread. * Make a clean region, make a stack of 5000 prim, 20 layers high. Make them physical, *SLOW*, but no crash.
2009-02-08* Fixes colliding with the terrain lower then 0 and higher then 256mTeravus Ovares1-11/+10
* The actual AABB of the heightfield on the Z is now determined by the minimum and maximum heightfield value in the terrain array (assuming it's a reasonable number). This might optimize collisions in simulators that have a small difference between minimum and maximum heightfield values.
2009-02-03Change access levels from private to protected to facilitateMike Mazur7-216/+225
subclassing; also add new method signatures. Thanks tuco and mikkopa. Fix Mantis #3072.
2009-01-31* Tweaks some locks when modifying an ODECharacter. This actually allows a ↵Teravus Ovares2-17/+45
user to log-in while the physics scene and the scripts are starting up. This also seems to smooth out the jerks on teleport/connect/disconnect a little bit. * If you log-in while the simulator is starting up, you won't be able to move and the sim stats will say 0 FPS, and 0 Physics Frames and you may see only terrain. Once the sim finishes starting up, it'll all resume as normal.
2009-01-21* More friendly OpenJpeg error handling.Teravus Ovares1-0/+11
* Often times now the only reason OpenJpeg doesn't work is because it requires Glibc 2.4 The error messages reflect that. * In J2kDecoder module, It stops trying to decode modules if it encounters a dllnotfound exception and instead sends a full resolution layer that causes the texture sender to only send the full resolution image. (big decrease in texture download speed, but it's better then nasty repeating error messages)
2009-01-21Fix an error in sculpt LOD calculationDahlia Trimble1-3/+3
2009-01-14Improve parsing of joint parameters for NINJA physics (Mantis #2966). nlin1-1/+1
Multiple spaces or leading/trailing spaces when specifying the prims to connect should no longer cause problems.
2009-01-04sync with primmesher r26 on forgeDahlia Trimble1-36/+162
2009-01-04Improve LOD scaling for anisotropic sculpted prim meshesDahlia Trimble1-1/+2
2008-12-31Slight optimisation: Don't check for duplication if we won't use the result ↵Homer Horwitz1-7/+7
anyway.
2008-12-31- Added the fixed Ode.NET.dllHomer Horwitz1-5/+5
- Adapted code to match the corrected signatures - Fixes Mantis #2934. Hopefully. Note: Physics on linked objects still don't work correctly: It doesn't crash the region anymore, but the example object in the mentioned mantis now falls through the ground.
2008-12-31Added a missing setMass for initializing the mass of primsHomer Horwitz1-1/+2
2008-12-30* Remove mono compiler warningsJustin Clarke Casey1-1/+0
* Leaving the 23 warnings in ChildAgentDataUpdate.cs for Diva to look at
2008-12-30Update svn properties, minor formatting cleanup.Jeff Ames3-112/+112
2008-12-28* More NINJA Joint physics fixes from nlin.Teravus Ovares3-11/+11
fixes mantis #2874
2008-12-27* Fixes mantis #2922Teravus Ovares3-11/+11
* Converts some C# 3.0 syntax into it's 2.0 equivalent so that Visual Studio 2005 can compile it successfully.
2008-12-26* Applying Nlin's NINJA Joint patch. v2. Mantis# 2874Teravus Ovares6-2/+769
* Thanks nlin! * To try it out, set ninja joints active in the ODEPhysicsSettings and use the example at: * http://forge.opensimulator.org/gf/download/frsrelease/142/304/demo-playground.tgz. * Don't forget to change the .tgz to .oar and load it with load-oar.
2008-12-22Removed some debugging code that was inadvertently left in in my last commit :/Dahlia Trimble1-3/+0
2008-12-22Fix a floating point comparison that was causing some misshaped triangles on ↵Dahlia Trimble1-8/+19
some prim faces
2008-12-20Mantis#2796. Thank you kindly, Gerhard for a patch that addresses:Charles Krinke2-2/+25
On a call of llVolumeDetect(1) (or any other number !=0) volume detection is enabled. Together with VD, the phantom flag is set to the GUI. On a call of llVolumeDetect(0), vd detection is switched of again, also the phantom state is removed. On a call to llSetState(STATE_PHANTOM, false) while VD is active, also VD is switched off. The same is true for unchecking the phantom flag via GUI. This allows to take back VD without the need to script just by removing the phantom flag. Things missing in this patch: persistance of the volume-detection flag. This needs more discussion and will be included in another patch soon.
2008-12-18Enabled complex meshing for simple box prims with non-zero shearDahlia Trimble1-2/+3
2008-12-17* remove mono compiler warningsJustin Clarke Casey4-8/+8
* should work - the last compile failure looks like a random glitch...
2008-12-15* Apply http://opensimulator.org/mantis/view.php?id=2775 with small tweaksJustin Clarke Casey8-20/+38
* This pushes an identifier for the OpenSim scene to the physics scene. This allows log messages from the physics scene to identify which OpenSim scene they relate to. * Thanks Gerhard
2008-12-14* Implements the torque/Rotational Impulse methods in the PhysicsAPI and the ↵Teravus Ovares8-3/+160
ODEPlugin and pipes them to their respective LSL method. * NBody will need to be updated, this is an API change. Torque property and AddAngularForce
2008-12-14* Added Avatar minimum size in the ODEPlugin and a stern warning about ↵Teravus Ovares1-0/+15
setting the capsule size too low in OpenSim.ini
2008-12-14* A Few physical prim + linkset fixes. Prevent some crashesTeravus Ovares1-19/+51
2008-12-10* Committing a slightly distilled version of nlin's ODECharacter race ↵Teravus Ovares2-45/+139
condition eliminator. * The modifications that I made were only so that it didn't require changes to the public physics api.
2008-12-09* Fixes a few instances of llSetStatus with Axis lock gone wrong. Teravus Ovares1-4/+46
* Sums up the masses of the objects within a physical linkset
2008-12-09Minor formatting cleanup.Jeff Ames1-2/+2
2008-12-09* Gerhard's patch m2781. Does some initial work for setting up llVolumeDetect.Teravus Ovares9-1/+48
* Warning! Physics API change. This means that the NBodySimulation needs to be updated! * PhysicsActor -> void SetVolumeDetect(int) needs to go into classes that use PhysicsActor as their base class.
2008-12-09clean up some old debugging codeDahlia Trimble1-43/+0
2008-12-08* Adds some rudimentary error handling to the physics debug drawstuff tool.Teravus Ovares1-6/+16
2008-12-07* Tweaks physics so that linked prim are a single body. This will make ↵Teravus Ovares3-83/+687
linked prim more stable and probably the last obstacle to vehicles physics wise. * Fixed a bug that caused physics proxies to be scattered when you link an object. * Single physical prim work exactly the same as before, just linked physical prim will have changed.
2008-12-05killing warnings, reformatting RemoteAdminPluginDr Scofield1-1/+1
2008-12-04* Apply http://opensimulator.org/mantis/view.php?id=2750 with a small tweak.Justin Clarke Casey1-2/+5
* Initializes ODE only when a scene is grabbed rather than on plugin load. This means we don't initialize ode if that physics engine is not used, and it allows other ode use plugins to be used instead.
2008-12-03Update svn properties.Jeff Ames2-2511/+2511
2008-12-01Remove duplicated avatar height calculation in lsl functions.idb3-17/+34
Use height calculation in Basic Physics and Physics of Simplicity so that avatars larger than the default walk with straight legs and shorter walk on the ground.
2008-11-30Revert r7548 and r7549 until someone with prebuild-fu can help structure the ↵Dahlia Trimble2-0/+2511
dependencies
2008-11-30Removed remaining meshing codeDahlia Trimble2-2511/+0
Add PrimMesher.dll r21 All meshing tasks are now passed through Meshmerizer and handled by PrimMesher.dll