aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/OpenSim/Region/Physics (unfollow)
Commit message (Collapse)AuthorFilesLines
2009-04-16* Committing more BulletDotNETPlugin workTeravus Ovares3-10/+315
* Tweak the LLSetStatus results in the ODEPlugin. Hopefully it's a little less unstable. * ODEPlugin is using experimental math for LLSetStatus, use with caution! :)
2009-04-14* Adding some organization of vehicle type stuff in the ODEPlugin.Teravus Ovares3-183/+535
* Vehicles do NOT work. This is just organization and a bit of logical code to make doing vehicles easier
2009-04-14* Commit a variety of fixes to bugs discovered while trying to fix the NaN ↵Teravus Ovares1-11/+100
singularity. * WebStatsModule doesn't crash on restart. GodsModule doesn't crash when there is no Dialog Module. LLUDPServer doesn't crash when the Operation was Aborted. * ODEPlugin does 'Almost NaN' sanity checks. * ODEPlugin sacrifices NaN avatars to the NaN black hole to appease it and keep it from sucking the rest of the world in.
2009-04-11* BulletDotNETPlugin supports Axis lock (LLSetStatus) from the script engine ↵Teravus Ovares1-2/+93
now.
2009-04-11* Instead of referencing mesh stuff in the physics plugin.. change the IMesh ↵Teravus Ovares3-17/+29
Interface. (blame prebuild)
2009-04-10* Adds Physical/Active Linkset support to BulletDotNETPluginTeravus Ovares1-108/+268
2009-04-10* Tweak the character controller some moreTeravus Ovares2-191/+348
* Add cursory integration with script engine. * LLMoveToTarget, LLSetBouyancy, LLSetStatus (Physical only), LLApplyImpulse, LLApplyTorque, LLPushObject.. etc. * Still missing linked physical active and LLSetStatus with an axis lock.
2009-04-09* Whoops, never saved the BulletDotNETScene.. Last commit continued.....Teravus Ovares1-1/+1
2009-04-09* Changes the timstep of the bullet world Teravus Ovares2-11/+12
* Enables border crossings when using the BulletDotNETPlugin * Enabled variable time steps in BulletDotNETPlugin * Still no 'linked physical objects' yet * Still no script engine integration
2009-04-07* Added finite testing to the character and object constructorTeravus Ovares2-4/+35
2009-04-07* Added a routine to check if a PhysicsVector and Quaternion is finiteTeravus Ovares3-45/+193
* Now validating input to the Physics scene and warning when something is awry. * This should help nail down that Non Finite Avatar Position Detected issue.
2009-04-07* Tweak the BulletDotNETPlugin character controller so it feels more finished.Teravus Ovares2-3/+20
2009-04-07* This fixes BulletDotNET so it can now be used on linux.Teravus Ovares1-0/+2
2009-04-07* BulletDotNET Updates. Teravus Ovares2-59/+219
* Should react somewhat normally to editing, and setting physics now.
2009-04-06Add copyright headers, formatting cleanup.Jeff Ames4-4/+86
2009-04-05unspecified sculpt stitching mode now defaults to plane instead of sphere. ↵Dahlia Trimble1-1/+3
Addresses Mantis #3403
2009-04-05* Fixing SVN propertiesTeravus Ovares6-4031/+4031
2009-04-05* Committing what I have on the BulletDotNETPlugin that I have so far. Teravus Ovares6-0/+4033
* It's not ready to try. It doesn't do what you expect in many ways. * It throws errors and prints jibberish on the console * Test it out only if you're brave and you've backed up first. * The opensim.ini line is physics = BulletDotNETPlugin
2009-04-03fix an error in hollow cylinder face number calculationDahlia Trimble1-1/+2
2009-04-02partial support for sculpted prim "inside out" settingDahlia Trimble1-11/+38
2009-04-01* Upped trunk version number to 0.6.4 as we just tagged 0.6.4-releaselbsa716-6/+6
2009-04-01Hard code scaled image resolution to 96 dpi prior to sculpt meshing to ↵Dahlia Trimble1-2/+2
prevent a mono 2.4 failure. Thanks to cmickeyb for pointing out the failure.
2009-03-31From: Alan M Webb <alan_webb@us.ibm.com>Dr Scofield1-1/+9
Add sanity check to fly-height calculation so that it does not attempt to retrieve information from non-existent regions.
2009-03-30* Remove a debug line of localIDsTeravus Ovares1-1/+1
2009-03-30* Fixing thread safety of avatar adding and removing from the Physics Scene ↵Teravus Ovares3-7/+29
in the ODEPlugin * This may help one of the symptoms or mantis 3363 , however it probably won't solve the occasional NonFinite Avatar Position detected.. issues that some people see. That is probably an entirely different issue(NaN).
2009-03-26add x-axis mirror capability to sculpted prim mesh - addresses Mantis #3342Dahlia Trimble2-2/+16
2009-03-26make some arrays static to prevent excessive re-initialization - suggested ↵Dahlia Trimble1-5/+5
by jhurliman
2009-03-20Ensure the remembered velocity is zero when physical is turned off on a ↵idb1-1/+5
prim. Without this the velocity gets sent to the client and the prim appears to move. Fixes Mantis #3303
2009-03-15fixed propagation of normalized sculpt mesh vertex normalsDahlia Trimble1-3/+3
2009-03-11* Make all coded defaults match settings in OpenSim.ini.exampleJustin Clarke Casey1-4/+4
* In most cases, the setting in OpenSim.ini.example is taken as the canonical one since this is the file virtually everyone ends up using * OpenSim will start up with a blank OpenSim.ini, in which case sqlite is the default database (as before)
2009-03-09* Tweak llMoveToTarget per mantis 3265Teravus Ovares1-1/+1
* Add some comments to the Wind Module * Add the BinBVH decoder/encoder as a scene object (to encode/decode animations programmatically). * Add m_sitState for upcoming code to improve sit results.
2009-03-07Minor formatting cleanup.Jeff Ames2-8/+36
2009-03-07Correct a typo, purely cosmetic.idb1-1/+1
FixesMantis #3263
2009-03-07* Making the minimum ground offset for flying a configurable offset in the ↵Teravus Ovares2-5/+11
OpenSim.ini. This is the code that causes you to rise off the ground when you press the fly button and attempts to keep you above ground automatically when flying in a simulator. * minimum_ground_flight_offset, by default is 3 meters, as per Kitto Flora See OpenSim.ini.example for an example.
2009-03-07* fixes mantis 3259Teravus Ovares1-0/+9
* I'm concerned however that the 'minimum fly height' should really be implemented in ScenePresence and not in the specific physics plugin so that all of the physics plugins can take advantage of it and if desired, a person could swap out the 'minimum fly height' functionality with other functionality.
2009-03-07* Added some limits to the maximum force applied per second by ↵Teravus Ovares2-2/+27
llMoveToTarget. Currently, it's 350 times the mass in newtons applied per second, maximum.
2009-03-06Fixes Mantis #3260. Thank you kindly, MCortez for a patch that:Charles Krinke9-2/+177
llSetHoverHeight() should not clamp the x/y position of an object the way MoveTo does, and it should recalculate the absolute height to hover at as an object moves to reflect the current ground/water height under it. Correctly implementing required adjusting the Physics interfaces and implementing at the physics plug-in level. The attached is a patch that correctly implements llSetHoverHeight() including updates to the ODE physics plug-in.
2009-03-05* Fixing a few mass calculation errors suggested by jhurlimanTeravus Ovares1-2/+2
2009-02-25* minor: Remove most mono compiler warningsJustin Clarke Casey1-1/+1
2009-02-24remove log4net dependency and from PrimMesher.csDahlia Trimble2-7/+18
sync PrimMesher.cs with PrimMesher.dll version 29 on forge
2009-02-22Mantis#3218. Thank you kindly, TLaukkan (Tommil) for a patch that:Charles Krinke7-27/+41
* Added log4net dependency to physxplugin in prebuild.xml. * Added missing m_log fields to classes. * Replaced Console.WriteLine with appropriate m_log.Xxxx * Tested that nant test target runs succesfully. * Tested that local opensim sandbox starts up without errors.
2009-02-20* Upped VersionInfo to 0.6.3 and in the process, changed assemblyinfo to ↵lbsa716-18/+18
0.6.3.* to better track down dll ref and overwrite problems.
2009-02-19* Changed all AssemblyInfo to explicit version 1.0.0.0 to not confuse poor ↵lbsa715-5/+5
poor Nant. We probably should take the opportunity to let the non-module bins reside in their /bin/Debug dirs later.
2009-02-15This started as way to correct Mantis #3158, which I believe should be fixed ↵diva6-7/+12
now. The flying status was temporarily being ignored, which caused the avie to drop sometimes -- there was a race condition. In the process it also fixes that annoying bug in basic physics where the avie would drop half-way to the ground upon region crossings (SetAppearance was missing). Additionally, a lot of child-agent-related code has been cleaned up; namely child agents are now consistently not added to physical scenes, and they also don't have appearances. All of that happens in MakeRoot, consistently.
2009-02-15Set sculpt map alpha to 255 prior to scaling and meshing. Addresses Mantis #3150Dahlia Trimble1-0/+8
2009-02-13Add copyright headers. Minor formatting cleanup. Fix some compiler ↵Jeff Ames2-3/+3
warnings. Fix some m_log declarations.
2009-02-12Thanks Kitto Flora for a patch that adds automatic min fly height to ODE - ↵Dahlia Trimble2-9/+21
Mantis #3134
2009-02-08* Some minor cleanupTeravus Ovares1-30/+30
* sealed OdeScene
2009-02-08Reverts patch from tuco/mikkopa/sempuki mantis #3072Teravus Ovares7-225/+216
2009-02-08* Limit the total number of joints created per frame to the maximum possible ↵Teravus Ovares1-12/+53
without causing a stack collision. * This fixes crashing on large sets of physical prims because of stack collisions (assuming you follow the directions on linux for starting ode with ulimit). After the maximum joints are created, objects will start to fall through the ground and be disabled. Not the best solution, but it's better then a crash caused by a stack collision with the process exceeding the maximum available memory/recursions per thread. * Make a clean region, make a stack of 5000 prim, 20 layers high. Make them physical, *SLOW*, but no crash.
generated by cgit v1.1 at 2024-07-18 07:07:27 +0000