aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/OpenSim/Region/Physics/OdePlugin (unfollow)
Commit message (Collapse)AuthorFilesLines
2008-11-01Revert last checkin. Avatars fall through non-physical prims now.Charles Krinke1-12/+7
There is more to the solution then just enabling soft_erp and soft_cfm for all d.Contact cases.
2008-11-01Added soft_cfm and soft_erp to the general "contact" initializationCharles Krinke1-7/+12
for physical prim interactions. They were not previously enabled for prim-prim interactions.
2008-10-22* Add a config option for filtering collisions. Sometimes, under load, ↵Teravus Ovares1-0/+5
this seems to cause bouncing on really thin flat prim.
2008-10-18* Changed the dupe collision depth limiter to be slightly more restrictive. ↵Teravus Ovares1-3/+3
(less chance for a dupe)
2008-10-17* Fix an over compensation for bounciness on flat PrimitiveTeravus Ovares2-9/+7
* Implement the linear impulse portion of llPushObject. We should have a lsl compatible implementation of that portion of the push. Angular.. well. still have yet to implement a torque accumulator. * llPushObject respects the region and parcel settings for Restrict Push, it also respects GodMode as is defined in the LSL spec.
2008-10-17* Adds a lot of stability and performance to the physics engine. The ↵Teravus Ovares1-1/+86
avatar bounces less and things are a bit less explosive. * Additionally, you can probably get more physical prim now together.. though, I think this puts us back on par with where we were in the beginning of the year on number of physical objects. Experiment. Make videos. Send Feedback. Enjoy.
2008-10-16* minor: get rid of pointless ipeSenderJustin Clarke Casey1-0/+1
2008-10-16* Apply http://opensimulator.org/mantis/view.php?id=2401Justin Clarke Casey1-0/+1
* Removes spacers that are also separators in llParseString2List * Thanks idb
2008-10-16* Releases the inter-region thread synchronization between physics in ODE on ↵Teravus Ovares3-6/+7
the same instance. * If you are hosting many regions on a single instance, you will probably notice a decrease in region startup time and maybe a slight increase in performance. * Single regions won't notice anything different
2008-10-14* Cleaned up tons of code duplication in ODEPrim Teravus Ovares2-313/+235
* Re-enabled the native ODE prim types when possible * Fixed several invalid assumptions in the prim recycle process. * Added better message for 'reused a disposed physicsactor' * Added a way to recover from errors during collision_optimized * Added a way to recover from an error condition where prim_geom wasn't reset properly
2008-10-13* Based on user reports, it looks like the OS specific settings have been ↵Teravus Ovares1-4/+4
unified as far as tuning (thank heavens). * If you're experiencing knee bendiness try the windows settings, as the *nix settings seem to now be incorrect. (this update does that, but you may have your own opensim.ini settings active.
2008-10-12* This updates ODE to the most up-to-date version as of today. 1558Teravus Ovares1-0/+1
* Mac users, pray to chi11ken to make you a .dylib version * This is semi-tuned and post teravus hack. (Though I didn't apply the terrain pitting fix hack. I'm still deciding if it's necessary as there was a lot of work over the past several months on the heightfield collider. * Please use '--enable-shared --disable-demos --disable-asserts' if you are building your own libode in the configure step. Asserts are pretty much useless for use with .NET * This also updates ODE.NET as, there were some API changes in May that were just added to ODE.NET today.
2008-09-28Implement the plumbing for llSetVehicleType from the LSLCharles Krinke2-0/+12
subroutine down through the physics modules through PhysActor and SceneObjectPart. No connection to the physics simulators.
2008-09-28Added the plumbing for llSetVehicleRotationParamCharles Krinke2-0/+11
in the classes between the LSL implementation and the underlying physics engines.
2008-09-28Plumb the connection though from llSetVehicleVectorParamCharles Krinke2-6/+14
to the various physics engines. No connection to the underlying physics simulator yet, just plumbing through the various classes.
2008-09-28Plumb the connection through from llSetVehicleFloatParamCharles Krinke2-0/+12
to the various physics engines. No connection to the underlying physics simulator yet, just plumbing through the various classes.
2008-09-22Disabled use of ODE internal geometry to see if it affects the "waves ↵Dahlia Trimble1-12/+12
finger" error
2008-09-21ODE was using a box collision shape for some spheres - changed those cases ↵Dahlia Trimble1-2/+3
to now use a mesh instead.
2008-09-21Update svn properties, minor formatting cleanup.Jeff Ames1-2/+2
2008-09-19re-enabled some ODE internal proxies for some simple prim types to try to ↵Dahlia Trimble2-50/+70
save some more memory
2008-09-18* Make the ode simulation update loop print out the stack if an exception ↵Justin Clarke Casey1-1/+1
occurs (at least, this is what will happen on linux)
2008-09-18XEngine: fix collisions, add event coalescing for collision events.Melanie Thielker1-6/+4
Fix a nasty concurrency issue that could cause a high event frequency to start more than one thread pool job for a single script.
2008-09-06* This is the fabled LibOMV update with all of the libOMV types from JHurlimanTeravus Ovares4-80/+74
* This is a HUGE OMG update and will definitely have unknown side effects.. so this is really only for the strong hearted at this point. Regular people should let the dust settle. * This has been tested to work with most basic functions. However.. make sure you back up 'everything' before using this. It's that big! * Essentially we're back at square 1 in the testing phase.. so lets identify things that broke.
2008-08-27ODEPlugin now frees source mesh data after conversion to pinned lists to ↵Dahlia Trimble1-0/+2
save memory
2008-08-18Formatting cleanup.Jeff Ames2-89/+81
2008-07-25Re-enables testing for config option mesh_sculpted_prim which was ↵Dahlia Trimble2-28/+35
inadvertently disabled in a prior modification (oops) :)
2008-07-25* Fix the ODEPlugin unit testTeravus Ovares1-3/+3
2008-07-24Changed application of constant forces to after PID force is applied. ↵Dahlia Trimble1-3/+7
llSetForce() should behave identical to the Linden implementation now.
2008-07-24Implements llSetForce() and llGetForce(). These are experimental and the ↵Dahlia Trimble2-3/+8
units may not match the Linden implementation.
2008-07-18refactor - commenting out needsMeshing() and all references as createMesh() ↵Dahlia Trimble2-179/+297
has the same logic and obsoletes the need for it.
2008-07-12Passes prim physical status to mesher from physics pluginsDahlia Trimble2-3/+3
Small prims now get a full mesh if they are physical Fixed a logic bug that was preventing many prim meshes from having excess memory cleaned up Switched to more conservative method of vertex and triangle list trimming to prevent possible crash
2008-07-12Overloads CreateMesh method of interface IMesher to pass prim physical ↵Dahlia Trimble1-1/+1
status to mesher
2008-06-27dr scofield's warnings safari:Dr Scofield3-21/+22
* commenting out unused variables
2008-06-25Minor formatting cleanup.Jeff Ames1-16/+17
2008-06-21Changes selection criteria to allow meshing of more sphere prim configurations.Dahlia Trimble1-1/+4
Adds comments to some functions in Meshmerizer.cs.
2008-06-20* Patch from nlin to enable DIF state file writing from the ODEPluginTeravus Ovares1-0/+28
* Rebuilt libode.so, ode.dll * If you roll your own ODE library, make sure to update your opensim-libs.
2008-06-04* Added a check for a non-finite heightfield array value passed to the ↵Teravus Ovares1-0/+9
ODEPlugin. This may, or may not fix anything.
2008-06-02* While I couldn't reproduce it, I was able to see how it *might* happen, so ↵Teravus Ovares1-2/+5
therefore; fix to: 0001058: Physics crash when changing Type of Prim intersecting with ground.
2008-05-29* Applying Dahlia's interim path curve patch. it adds initial support for ↵Teravus Ovares1-0/+19
some tori/ring parameters. Thanks Dahlia! * Some situations do not match the client's render of the tori, we know and are working on it. This is an initial support patch, so expect it to not be exact. * Some tapers are acting slightly odd. Will fix.
2008-05-25* Adds Top Colliders when using ODE. Access it from the estate tools/debug tab.Teravus Ovares3-2/+34
2008-05-25* Releases Pinned vertex/index list in ODE on next mesh request.Teravus Ovares1-2/+15
2008-05-18Formatting cleanup, minor refactoring. Fixed some comparisons of value ↵Jeff Ames1-53/+46
types and null.
2008-05-17Formatting cleanup.Jeff Ames1-133/+21
2008-05-16* This finishes the ODE options section of the OpenSim.ini.example. I've ↵Teravus Ovares2-40/+100
added 44 configurable options! * This includes if you want to mesh sculpties and the Level of detail on the sculptie meshing for non physical and a separate LOD on physical sculpties. * The options range from gravity.. to avatar movement speed, to friction management.. to object density.. to update throttling.
2008-05-16Formatting cleanup.Jeff Ames3-284/+212
2008-05-15* Adds various tweakable avatar control options to the OpenSim.ini.example.Teravus Ovares2-41/+70
2008-05-15* Added about half of the planned ODE physics options to OpenSim.ini.example.Teravus Ovares3-61/+133
* Some will do cool things, some will make your scene explode dramatically if you're not careful.
2008-05-15* Got rid of an old crufty sleep that was being called. Thanks for your ↵Teravus Ovares1-1/+1
support in load testing Adam's simulator was what pointed this old crufty sleep out. * Please, we need more load tests with profilers running. :D
2008-05-14* Refactored IConfigSource into Physics plug-ins and Scene. We can get rid ↵Teravus Ovares2-2/+7
of some of the parameters we pass to it's constructor now like, 'm_allowPhysicalPrim', 'seeIntoOtherRegions', etc.. so on * The main purpose of this is to provide configuration options for ODE and other physics plug-ins that are advanced enough to be able to be configured.
2008-05-14More formatting cleanup.Jeff Ames1-2/+2