| Commit message (Collapse) | Author | Files | Lines |
|---|
|
* Fixes mantis #3922
|
|
|
|
* Commented logic that wasn't being used.
* This should fix the errors in OdeScene.near
|
|
a raycast test safely.
* Test for prim obstructions between the avatar and camera. If there are obstructions, inform the client to move the camera closer. This makes it so that walls and objects don't obstruct your view while you're moving around. Try walking inside a hollowed tori. You'll see how much easier it is now because your camera automatically moves closer so you can still see.
* Created a way to know if the user's camera is alt + cammed or just following the avatar.
* Changes IClientAPI interface by adding SendCameraConstraint(Vector4 CameraConstraint)
|
|
Set av_capsule_tilted to false in opensim.ini. Default is true, so there is
no change in avatar behavior (and no breaking of existing content which
relies on the tilted capsule).
This commit straightens up the avatar capsule so it behaves consistently
(e.g. same collision behavior against prims regardless of which direction
the avatar is coming from; ability to fit through narrow doorways).
Please note this introduces other side effects which have not been fixed.
In particular:
* The avatar frequently falls through the terrain if it is not flat, though
the avatar behaves pretty well on flat terrain. This requires investigation
of the ode terrain collider.
* The apparent foot position of the avatar with respect to the ground
is changed. This requires investigation of the avatar height/capsule height.
Please consider this as work in progress.
|
|
engine, caused by an "avatar infinite position" occurring under
heavy load.
- fixes "value too small" exception in ChatModule
|
|
Eat collision errors --- NOTE: this fix might be naive, it seems to
have helped us getting to 81 avatars (whereas we'd crash with 20
before), but it sure would benefit from some check-over by a person
skilled in the art of ODE physics.
|
|
|
|
NOTE: we currently have a gazillion warnings caused stuff flagged as
"obsolete" (OGS1 stuff) --- what's up with that?
|
|
* Define low friction and medium bounce for Glass
|
|
OpenSim.ini which will use meshes for collisions with simple prim shapes rather than internal ODE algorithms. This may help with Mantis #2905 and Mantis #3487 for those experimenting with capsule settings.
Note that this will increase memory usage and region startup time.
|
|
Add sanity check to fly-height calculation so that it does
not attempt to retrieve information from non-existent
regions.
|
|
in the ODEPlugin
* This may help one of the symptoms or mantis 3363 , however it probably won't solve the occasional NonFinite Avatar Position detected.. issues that some people see. That is probably an entirely different issue(NaN).
|
|
* In most cases, the setting in OpenSim.ini.example is taken as the canonical one since this is the file virtually everyone ends up using
* OpenSim will start up with a blank OpenSim.ini, in which case sqlite is the default database (as before)
|
|
FixesMantis #3263
|
|
OpenSim.ini. This is the code that causes you to rise off the ground when you press the fly button and attempts to keep you above ground automatically when flying in a simulator.
* minimum_ground_flight_offset, by default is 3 meters, as per Kitto Flora See OpenSim.ini.example for an example.
|
|
* I'm concerned however that the 'minimum fly height' should really be implemented in ScenePresence and not in the specific physics plugin so that all of the physics plugins can take advantage of it and if desired, a person could swap out the 'minimum fly height' functionality with other functionality.
|
|
llMoveToTarget. Currently, it's 350 times the mass in newtons applied per second, maximum.
|
|
llSetHoverHeight() should not clamp the x/y position of an object the way MoveTo does,
and it should recalculate the absolute height to hover at as an object moves to reflect
the current ground/water height under it.
Correctly implementing required adjusting the Physics interfaces and implementing at
the physics plug-in level. The attached is a patch that correctly implements
llSetHoverHeight() including updates to the ODE physics plug-in.
|
|
* Added log4net dependency to physxplugin in prebuild.xml.
* Added missing m_log fields to classes.
* Replaced Console.WriteLine with appropriate m_log.Xxxx
* Tested that nant test target runs succesfully.
* Tested that local opensim sandbox starts up without errors.
|
|
now. The flying status was temporarily being ignored, which caused the avie to drop sometimes -- there was a race condition. In the process it also fixes that annoying bug in basic physics where the avie would drop half-way to the ground upon region crossings (SetAppearance was missing). Additionally, a lot of child-agent-related code has been cleaned up; namely child agents are now consistently not added to physical scenes, and they also don't have appearances. All of that happens in MakeRoot, consistently.
|
|
warnings. Fix some m_log declarations.
|
|
Mantis #3134
|
|
* sealed OdeScene
|
|
|
|
without causing a stack collision.
* This fixes crashing on large sets of physical prims because of stack collisions (assuming you follow the directions on linux for starting ode with ulimit). After the maximum joints are created, objects will start to fall through the ground and be disabled. Not the best solution, but it's better then a crash caused by a stack collision with the process exceeding the maximum available memory/recursions per thread.
* Make a clean region, make a stack of 5000 prim, 20 layers high. Make them physical, *SLOW*, but no crash.
|
|
* The actual AABB of the heightfield on the Z is now determined by the minimum and maximum heightfield value in the terrain array (assuming it's a reasonable number). This might optimize collisions in simulators that have a small difference between minimum and maximum heightfield values.
|
|
subclassing; also add new method signatures. Thanks tuco and mikkopa.
Fix Mantis #3072.
|
|
user to log-in while the physics scene and the scripts are starting up. This also seems to smooth out the jerks on teleport/connect/disconnect a little bit.
* If you log-in while the simulator is starting up, you won't be able to move and the sim stats will say 0 FPS, and 0 Physics Frames and you may see only terrain. Once the sim finishes starting up, it'll all resume as normal.
|
|
Multiple spaces or leading/trailing spaces when specifying the prims
to connect should no longer cause problems.
|
|
anyway.
|
|
|
|
* Thanks nlin!
* To try it out, set ninja joints active in the ODEPhysicsSettings
and use the example at:
* http://forge.opensimulator.org/gf/download/frsrelease/142/304/demo-playground.tgz.
* Don't forget to change the .tgz to .oar and load it with load-oar.
|
|
On a call of llVolumeDetect(1) (or any other number !=0) volume
detection is enabled. Together with VD, the phantom flag is set to the GUI.
On a call of llVolumeDetect(0), vd detection is switched of again,
also the phantom state is removed. On a call to llSetState(STATE_PHANTOM,
false) while VD is active, also VD is switched off. The same is true for
unchecking the phantom flag via GUI. This allows to take back VD without
the need to script just by removing the phantom flag.
Things missing in this patch: persistance of the volume-detection flag.
This needs more discussion and will be included in another patch soon.
|
|
|
|
* This pushes an identifier for the OpenSim scene to the physics scene. This allows log messages from the physics scene to identify which OpenSim scene they relate to.
* Thanks Gerhard
|
|
condition eliminator.
* The modifications that I made were only so that it didn't require changes to the public physics api.
|
|
* Warning! Physics API change. This means that the NBodySimulation needs to be updated!
* PhysicsActor -> void SetVolumeDetect(int) needs to go into classes that use PhysicsActor as their base class.
|
|
|
|
linked prim more stable and probably the last obstacle to vehicles physics wise.
* Fixed a bug that caused physics proxies to be scattered when you link an object.
* Single physical prim work exactly the same as before, just linked physical prim will have changed.
|
|
* Initializes ODE only when a scene is grabbed rather than on plugin load. This means we don't initialize ode if that physics engine is not used, and it allows other ode use
plugins to be used instead.
|
|
|
|
A tube on a pole is a bit less "flubbery" so maybe this is
the right direction.
|
|
|
|
There is more to the solution then just enabling soft_erp and
soft_cfm for all d.Contact cases.
|
|
for physical prim interactions. They were not previously enabled
for prim-prim interactions.
|
|
this seems to cause bouncing on really thin flat prim.
|
|
(less chance for a dupe)
|
|
* Implement the linear impulse portion of llPushObject. We should have a lsl compatible implementation of that portion of the push. Angular.. well. still have yet to implement a torque accumulator.
* llPushObject respects the region and parcel settings for Restrict Push, it also respects GodMode as is defined in the LSL spec.
|
|
avatar bounces less and things are a bit less explosive.
* Additionally, you can probably get more physical prim now together.. though, I think this puts us back on par with where we were in the beginning of the year on number of physical objects. Experiment. Make videos. Send Feedback. Enjoy.
|
