| Commit message (Collapse) | Author | Files | Lines |
|---|
|
on-/offline updates, calling cards for friends.
This adds methods in the DB layer and changes the MessagingServer, so a full
update (incl. UGAIM) is necessary to get it working. Older regions shouldn't
break, nor should older UGAIM break newer regions, but friends/presence will
only work with all concerned parts (UGAIM, source region and destination
region) at this revision (or later).
I added the DB code for MSSQL, too, but couldn't test that.
BEWARE: May contain bugs.
|
|
- Added lookup in the data-layer
- MySQL works
- SQLite doesn't have a grid-db, so it won't work there
- I added MSSQL-code to the best of my knowledge; but I don't know MSSQL :-)
- Added the plumbing up to OGS1GridServices. This speaks with the grid-server
via XMLRPC.
- Modified MapSearchModule to use the new data. It's backward compatible; if
used with an old grid-server, it just returns one found region instead of a
list.
- Refactored a bit.
Note: This updates data, grid-server and region code. No new files.
|
|
standalone where port wasn't the http port.
* Removed spurious warning message
* More debug in EventQueueGet Module to figure out why we're loosing the handlers.
|
|
* Updates to libomv r2243,
* Remove lots of unnecessary typecasts
* Improves SendWindData()
Thanks jhurliman.
* Will update OpenSim-libs in 10 minutes..
|
|
Active gestures are sent as part of the login-response. Added
fetchActiveGestures to SQLite and MySQL; added an empty one for MSSQL and
NHibernate. Using the empty ones won't cause errors, but doesn't provide
persistence either, of course.
|
|
startup (script startup doesn't count here)
* There was a small window where region logins were allowed before modules were loaded - avatars logins that hit this window could have caused bad things to happen.
* A similar change will follow for grid mode sometime soon
|
|
methods don't need to be implemented on Grid hosted region servers
|
|
protected.
* Made several methods virtual to allow derivative overrides.
* Minor cleanups.
|
|
* This patch aims to introduce look at direction persistence between logins. It won't be active until the second part of the patch is committed in about two weeks time. At
this point, region servers that haven't upgraded past this revision may run into problems
* This checkin upgrades the user database. As always, we recommend you have backups in case something goes wrong.
* Many thanks to tyre for this patch.
|
|
|
|
* Now it should properly inform the user and stop a login if a region server could not be contacted in order to expect a user (the last commit didn't actually quite work correctly)
|
|
* This is a HUGE OMG update and will definitely have unknown side effects.. so this is really only for the strong hearted at this point. Regular people should let the dust settle.
* This has been tested to work with most basic functions. However.. make sure you back up 'everything' before using this. It's that big!
* Essentially we're back at square 1 in the testing phase.. so lets identify things that broke.
|
|
Thank you, cmickeyb, for a patch that fixes inventory folder retrieval.
|
|
standalone. It wouldn't let you in even if your destination region is online with a 'region x not found' message.
* The purpose of the check was to ensure that your home region was sent to your client properly when you connected. However, the desired result is that if the home region is down, but the destination region is online, the user should still get in.
* Changes: if the home region isn't available, set the message to the client so that the home region is the destination region.
|
|
currently on Forge in a nice, friendly modular format.
* There are a lot of changes and this is quite experimental. It's off by default, but you can turn it on by examining the bottom of the opensim.ini.example for the proper OpenSim.ini settings. Remember, you still need an agent domain..
* Furthermore, it isn't quite right when it comes to teleporting to remote regions (place_avatar)
|
|
LocalLoginService does not send the last position coords in
the login response. This patch fixes the issue.
|
|
Remove old comment in SnapshotStore pointed out by ChrisDown (bug #2000)
|
|
of removed in LocalBackEndServices It used to be like the change above a long long time ago but we found that it caused intermittent neighbor connectivity issues. I added comments above it so that it's looked at more closely next time.
|
|
|
|
Places touched:
- Added two events for in-packets to LLCLientView: RegionHandleRequest and
ParcelInfoRequest
- Added sending of two out-packets to LLCLientView: RegionIDAndHandleReply and
ParcelInfoReply.
- Scene handles the RegionHandleRequest, LandManagementModule the
ParcelInfoRequest
- Added inter-region request for LandData by RegionHandle and local position.
This was implemented as XML-RPC request. The returned LandData isn't
complete, it only contains the data necessary for answering the
ParcelInfoRequest
- Added new CAPS (0009) for RemoteParcelRequest and some methods for LandData
handling to LandManagementModule
- Added methods for fake parcelID creation and parsing to Util
- Fixed missing implementation of interface methods.
- Added new file:
OpenSim/Framework/Communications/Capabilities/LLSDRemoteParcelResponse.cs
NOTE: This is part of the patch, too.
Due to the many places touched, I would consider this patch as experimental.
|
|
|
|
Thank you, HomerHorwitz, for a patch that corrects and improves TP
to landmark and home position handling.
|
|
'Available', which would lead to intermittent failures on parallell teleport requests.
* Solidified CheckRegion somewhat, adding a second try if the first failed.
|
|
When a region is re-registered (e.g. because of region restart),
it is removed from m_regions. If I understood that correctly,
the old entry should be replaced, instead.
|
|
GetInventorySkeleton
|
|
than inter grid
|
|
* more to follow
|
|
Patch 7 of the region patches. Finish off the region parts of the estate dialog. Full user functionality. Terrain textures, heights, water, avatar counts, prim bonus, debug settings and region toggles can now be set from the dialog on a per-region basis. Estate stuff defaults to sane values where there are no defaults, to estate_settings.xml otherwise. Sun still b0rked :(
|
|
Patch #4 of the region settings series. Partial functionality of the new
storage system. More patches to follow.
|
|
The Login service should now read/create new inventory on the inventory server that is set in a users profile.
Also added "Add-InventoryHost" console command to add a support for a new server to a region.
So it would be good if someone could test this. Set up the grid as normal, but then also run extra inventory server on a different computer (well actually it just has to be on a different network hostname, so one using "http://localhost:8004" and one using "http://127.0.0.1:8005" should work) then you need to manually edit the user profile database to set the new servers url in a user's "userInventoryURI" field.
Then on a region server, use the Add-InventoryHost to add the new server url (always include the full url, including http, but don't add a final /)
Login with that account and see if the inventory works.
Of course these needs to be made more user friendly.
|
|
and moved them into a IAvatarService
Although "out of the box", there is no actual functional change to behavior
|
|
TODO next is to make the login server read/write a users inventory from the correct server (the inventory url set in a userprofile)
On the region side, although not tested with multiple servers it should work if that inventory url was set, and the inventory servers urls have been added to the CommunicationsManager, using CommunicationsManager.AddInventoryService(string hostUrl)
|
|
* commented out [Obsolete(....)] attributes where no replacement feature
was available: if we want to attribute code that we think needs to be
reworked, we should define a new attribute and use that instead
(together with a little tool to retrieve all the attributed code then)
* commenting out unused variables
|
|
* User tries to log-in but is already logged in. Userserver will send message to simulator user was in to log the user out there.
* From the UserServer, admin types 'logoff-user firstname lastname message'.
* Some regions may not get the message because they're not updated yet.
|
|
|
|
Rename SearializableRegionInfo to SerializableRegionInfo (class was already named correctly)
|
|
|
|
|
|
|
|
almost every inventory method
* This allows lots of redundant inventory methods with only slightly different names to be eliminated.
|
|
with namespaces.
|
|
Thanks A_Biondi and Melanie!
* This builds but might not work. JustinCC will examine.. it may work out of the box.
|
|
the patch below adds support for start_location = uri:region&x&y&z to
OpenSim which allows us to provide -url secondlife:///region/X/Y/Z to
the SecondLife client during start up --- which will take you directly
to region "region" at position X, Y, Z.
also, i did increase the default Z value from 70 to 128 as we otherwise
have the problem that on some regions we'd end up inside a mountain
instead of on top of it.
|
|
* On standalone, folders (and their items) should now be persistently deleted on trash emptying, as well as immediate child items
* An implementation for grid mode will follow.
|
|
(this took a while to run).
|
|
before the region had completely received the inventory for the user.
* A much larger race condition where the inventory request could be made before the region gets any data at all will also be fixed in the near future.
* This change also fixes a regression from two patches ago where items stopped appearing in standalone inventory
|
|
|
|
at once, rather than each individual
* This is required in order to work towards eliminating some inventory race conditions and to better deal with situations where a grid inventory server is slow or not responding.
|
|
|
|
grief than expected, as monodevelop doesn't like to refactor
properties of properties.
|
