| Commit message (Collapse) | Author | Files | Lines |
|---|
|
May have some effect on http://opensimulator.org/mantis/view.php?id=5644
|
|
rather than abort.
When a user logs in, the attachment item ids are pulled from persistence in the Avatars table. However,
the asset ids are not saved. When the avatar enters a simulator the attachments are set again. If
we simply perform an item check then the asset ids (which are now present) are never set, and NPC attachments
later fail unless the attachment is detached and reattached.
Hopefully resolves part of http://opensimulator.org/mantis/view.php?id=5653
|
|
The second was already being filtered out so this has no user level effect
|
|
This was happening because we were using the source avatar's item IDs in the clone appearance.
Switch to using the asset IDs of attachments instead for NPCs.
The InventoryAccessModule and AttachmentModule had to be changed to allow rezzing of an object without an associated inventory item.
Hopefully goes some way towards resolving http://opensimulator.org/mantis/view.php?id=5653
|
|
rather than letting it terminate the simulator.
Exceptions don't appear to do this with the SmartThreadPool but they do with UnsafeQueueUserWorkItem (and maybe others)
|
|
|
|
|
|
If the inventory service is configured not to allow deletion then these will not disappear from inventory
|
|
PrimitiveBaseShape
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
|
|
|
|
|
|
|
|
|
|
|
|
BaseHttpServer.RemoveLLSDHandler()
|
|
|
|
|
|
|
|
removed from the scene.
This is done by introducing a PresenceType enum into ScenePresence which currently has two values, User and Npc.
This seems better than a SaveAttachments flag in terms of code comprehension, though I'm still slightly uneasy about introducing these semantics to core objects
|
|
This executes the callback on the same thread that made the request. Designed for use only by regression tests that rely on a predicable event ordering.
|
|
this is to allow walking on prims. it will be up to the script writer to be sure that there is a continuous path.
currently implemented in osNpcMoveToTarget(), but none of this is final.
|
|
|
|
agent
|
|
storage.
This works by serializing and deserializing NPC AvatarAppearance to a notecard in the prim inventory and making the required baked textures permanent.
By using notecards, we avoid lots of awkward, technical and user-unfriendly issues concerning retaining asset references and creating a new asset type.
Notecards also allow different appearances to be swapped and manipulated easily.
This also allows stored NPC appearances to work transparently with OARs/IARs since the UUID scan will pick up and store the necessary references from the notecard text.
This works in my basic test but is not at all ready for user use or bug reporting yet.
|
|
|
|
|
|
This is not used for anything - appearances are always properties of objects with ids (ScenePresence, AgentCircuitData) and just has the potential to get out of sync when the appearance is cloned.
|
|
Had to stop using AvatarService for now since it doesn't store baked texture IDs (which is why this was failing).
Also failing because cloning appearance was also cloning the AvatarApperance.Owner field, which we weren't then changing.
Extended TestCreate() to check this.
|
|
retrieved via GetDataBlock() then create a new stack instead of throwing an exception
|
|
continuing wtih the invocation.
This is to avoid bugs where the locale is not manually set on the thread and bad data values get sent to the database or over the wire.
Lots of code does this manually but as we've seen, a subtle change can hit code which has forgotton to do this.
Since en_US show be used throughout the server at present, setting it at FireAndForget seems reasonable.
Arguably, it would be better to do this where data is sent, but doing it here is much easier.
All the manual BeginInvokes() remaining in the code should probably call FireAndForget instead.
|
|
|
|
authorization service rather than from the account.
This is to accomodate situations where the authorization service is being used by the hypergrid, where visitors have no user account.
See http://opensimulator.org/mantis/view.php?id=5517, this code is somewhat adapted/cleaned up from Michelle's patch
I'm a little ambivalent about this since visitors could put anything in firstname/lastname so it's not much of an auth measure.
It's up to the auth service to decide which data it actually uses.
Possibly we should be passing through other info such as agent circuit ip
|
|
they use the defaults instead.
Some items had completely wrong permissions - this is easier than correcting them all.
The ability to set permissions in xml is retained since there are use cases for this (e.g. to create no-mod library scripts)
|
|
item xml files - always use PermissionMask.All instead (which was the existing default)."
There actually are uses for this. I will correct the perms instead since some entries appear to be wrong.
This reverts commit 667b54f5a2a04fa5a2859397868d270eab3913f1.
|
|
files - always use PermissionMask.All instead (which was the existing default).
Library items always need the same permissions, so it doesn't make sense to load them from the xml files. This just opens the door to permissions mistakes.
|
|
from XML properly.
|
|
Signed-off-by: root <root@grid00001.t-data.com>
|
|
remove OpenSim.Framework.UndoStack
|
|
own homebrew.
system stack also uses an array, so no performance penalty.
Also exposes undo count and adds a test assertion for correct undo count after resize
|
|
|
|
WebException rather than proceeding.
|
|
404, log the exception for diagnostic purposes
This is instead of logging "Invalid XML" for all failures, even if they weren't a result of invalid xml.
A default TReponse is returned in the event of a 404, which is the same behaviour as previously.
|
|
|
|
(setting SculptData is done through the property)
|
|
Unable to get to the bottom of why resizing a mesh fails to properly reset the physics proxy, when toggling phantom does
After a mesh is generated, the existing sculptdata is set to zero in PrimitiveBaseShape to save memory
When phantom is toggled, the sculptdata is regenerated before remeshing.
But on resize, the sculptdata is not regenerated.
So clearly, resetting sculptdata is possible, but haven't quite been able to pin down how this is being done when phantom is toggled.
|
|
an existing one with the same id.
We compare existing and loaded asset by doing an SHA1 on both, so that a changed library asset will still update the store.
This cuts asset library load time from 10 seconds to <1 sec.
Note, a fix on the previous commit revealed a bug where a library script cannot be copied except on the first login after a cache clear.
This is unrelated to this commit and needs to be fixed at some subsequent time.
|
|
As per http://wiki.secondlife.com/wiki/Mesh/Mesh_Asset_Format, some submesh blocks may just have the flag "NoGeometry" to signal that they provide no mesh data.
If a block contains this, ignore it for meshing purposes rather than suffer a ClassCastException
This fixes physics proxy meshing, so you can now walk through mesh doorways, properly stand on the trailer of mesh trucks, etc.
To get mesh physics proxy, the UseMeshiesPhysicsMesh must be true in a [Mesh] config section in OpenSim.ini (example in OpenSimDefaults.ini).
Convex hull physics not currently supported.
|
|
Disabled temporarily since file system caching disrupts subsequent test runs
|
|
user expectations.
It also matches the default setting in the OpenSim.ini.example file
|
|
automatically by dereferencing .git/HEAD
A blank bin/.version file will stop this being displayed.
|
