1 files changed, 369 insertions, 0 deletions

diff --git a/libraries/ode-0.9/ode/src/capsule.cpp b/libraries/ode-0.9/ode/src/capsule.cpp
new file mode 100644
index 0000000..5680baa
--- /dev/null
+++ b/libraries/ode-0.9/ode/src/capsule.cpp
@@ -0,0 +1,369 @@
+/*************************************************************************
+ *                                                                       *
+ * Open Dynamics Engine, Copyright (C) 2001-2003 Russell L. Smith.       *
+ * All rights reserved.  Email: russ@q12.org   Web: www.q12.org          *
+ *                                                                       *
+ * This library is free software; you can redistribute it and/or         *
+ * modify it under the terms of EITHER:                                  *
+ *   (1) The GNU Lesser General Public License as published by the Free  *
+ *       Software Foundation; either version 2.1 of the License, or (at  *
+ *       your option) any later version. The text of the GNU Lesser      *
+ *       General Public License is included with this library in the     *
+ *       file LICENSE.TXT.                                               *
+ *   (2) The BSD-style license that is included with this library in     *
+ *       the file LICENSE-BSD.TXT.                                       *
+ *                                                                       *
+ * This library is distributed in the hope that it will be useful,       *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the files    *
+ * LICENSE.TXT and LICENSE-BSD.TXT for more details.                     *
+ *                                                                       *
+ *************************************************************************/
+
+/*
+
+standard ODE geometry primitives: public API and pairwise collision functions.
+
+the rule is that only the low level primitive collision functions should set
+dContactGeom::g1 and dContactGeom::g2.
+
+*/
+
+#include <ode/common.h>
+#include <ode/collision.h>
+#include <ode/matrix.h>
+#include <ode/rotation.h>
+#include <ode/odemath.h>
+#include "collision_kernel.h"
+#include "collision_std.h"
+#include "collision_util.h"
+
+#ifdef _MSC_VER
+#pragma warning(disable:4291)  // for VC++, no complaints about "no matching operator delete found"
+#endif
+
+//****************************************************************************
+// capped cylinder public API
+
+dxCapsule::dxCapsule (dSpaceID space, dReal _radius, dReal _length) :
+  dxGeom (space,1)
+{
+  dAASSERT (_radius > 0 && _length > 0);
+  type = dCapsuleClass;
+  radius = _radius;
+  lz = _length;
+}
+
+
+void dxCapsule::computeAABB()
+{
+  const dMatrix3& R = final_posr->R;
+  const dVector3& pos = final_posr->pos;
+  
+  dReal xrange = dFabs(R[2]  * lz) * REAL(0.5) + radius;
+  dReal yrange = dFabs(R[6]  * lz) * REAL(0.5) + radius;
+  dReal zrange = dFabs(R[10] * lz) * REAL(0.5) + radius;
+  aabb[0] = pos[0] - xrange;
+  aabb[1] = pos[0] + xrange;
+  aabb[2] = pos[1] - yrange;
+  aabb[3] = pos[1] + yrange;
+  aabb[4] = pos[2] - zrange;
+  aabb[5] = pos[2] + zrange;
+}
+
+
+dGeomID dCreateCapsule (dSpaceID space, dReal radius, dReal length)
+{
+  return new dxCapsule (space,radius,length);
+}
+
+
+void dGeomCapsuleSetParams (dGeomID g, dReal radius, dReal length)
+{
+  dUASSERT (g && g->type == dCapsuleClass,"argument not a ccylinder");
+  dAASSERT (radius > 0 && length > 0);
+  dxCapsule *c = (dxCapsule*) g;
+  c->radius = radius;
+  c->lz = length;
+  dGeomMoved (g);
+}
+
+
+void dGeomCapsuleGetParams (dGeomID g, dReal *radius, dReal *length)
+{
+  dUASSERT (g && g->type == dCapsuleClass,"argument not a ccylinder");
+  dxCapsule *c = (dxCapsule*) g;
+  *radius = c->radius;
+  *length = c->lz;
+}
+
+
+dReal dGeomCapsulePointDepth (dGeomID g, dReal x, dReal y, dReal z)
+{
+  dUASSERT (g && g->type == dCapsuleClass,"argument not a ccylinder");
+  g->recomputePosr();
+  dxCapsule *c = (dxCapsule*) g;
+
+  const dReal* R = g->final_posr->R;
+  const dReal* pos = g->final_posr->pos;
+  
+  dVector3 a;
+  a[0] = x - pos[0];
+  a[1] = y - pos[1];
+  a[2] = z - pos[2];
+  dReal beta = dDOT14(a,R+2);
+  dReal lz2 = c->lz*REAL(0.5);
+  if (beta < -lz2) beta = -lz2;
+  else if (beta > lz2) beta = lz2;
+  a[0] = c->final_posr->pos[0] + beta*R[0*4+2];
+  a[1] = c->final_posr->pos[1] + beta*R[1*4+2];
+  a[2] = c->final_posr->pos[2] + beta*R[2*4+2];
+  return c->radius -
+    dSqrt ((x-a[0])*(x-a[0]) + (y-a[1])*(y-a[1]) + (z-a[2])*(z-a[2]));
+}
+
+
+
+int dCollideCapsuleSphere (dxGeom *o1, dxGeom *o2, int flags,
+                             dContactGeom *contact, int skip)
+{
+  dIASSERT (skip >= (int)sizeof(dContactGeom));
+  dIASSERT (o1->type == dCapsuleClass);
+  dIASSERT (o2->type == dSphereClass);
+  dIASSERT ((flags & NUMC_MASK) >= 1);

+  

+  dxCapsule *ccyl = (dxCapsule*) o1;
+  dxSphere *sphere = (dxSphere*) o2;
+
+  contact->g1 = o1;
+  contact->g2 = o2;
+
+  // find the point on the cylinder axis that is closest to the sphere
+  dReal alpha = 
+    o1->final_posr->R[2]  * (o2->final_posr->pos[0] - o1->final_posr->pos[0]) +
+    o1->final_posr->R[6]  * (o2->final_posr->pos[1] - o1->final_posr->pos[1]) +
+    o1->final_posr->R[10] * (o2->final_posr->pos[2] - o1->final_posr->pos[2]);
+  dReal lz2 = ccyl->lz * REAL(0.5);
+  if (alpha > lz2) alpha = lz2;
+  if (alpha < -lz2) alpha = -lz2;
+
+  // collide the spheres
+  dVector3 p;
+  p[0] = o1->final_posr->pos[0] + alpha * o1->final_posr->R[2];
+  p[1] = o1->final_posr->pos[1] + alpha * o1->final_posr->R[6];
+  p[2] = o1->final_posr->pos[2] + alpha * o1->final_posr->R[10];
+  return dCollideSpheres (p,ccyl->radius,o2->final_posr->pos,sphere->radius,contact);
+}
+
+
+int dCollideCapsuleBox (dxGeom *o1, dxGeom *o2, int flags,
+                          dContactGeom *contact, int skip)
+{
+  dIASSERT (skip >= (int)sizeof(dContactGeom));
+  dIASSERT (o1->type == dCapsuleClass);
+  dIASSERT (o2->type == dBoxClass);
+  dIASSERT ((flags & NUMC_MASK) >= 1);

+

+  dxCapsule *cyl = (dxCapsule*) o1;
+  dxBox *box = (dxBox*) o2;
+
+  contact->g1 = o1;
+  contact->g2 = o2;
+
+  // get p1,p2 = cylinder axis endpoints, get radius
+  dVector3 p1,p2;
+  dReal clen = cyl->lz * REAL(0.5);
+  p1[0] = o1->final_posr->pos[0] + clen * o1->final_posr->R[2];
+  p1[1] = o1->final_posr->pos[1] + clen * o1->final_posr->R[6];
+  p1[2] = o1->final_posr->pos[2] + clen * o1->final_posr->R[10];
+  p2[0] = o1->final_posr->pos[0] - clen * o1->final_posr->R[2];
+  p2[1] = o1->final_posr->pos[1] - clen * o1->final_posr->R[6];
+  p2[2] = o1->final_posr->pos[2] - clen * o1->final_posr->R[10];
+  dReal radius = cyl->radius;
+
+  // copy out box center, rotation matrix, and side array
+  dReal *c = o2->final_posr->pos;
+  dReal *R = o2->final_posr->R;
+  const dReal *side = box->side;
+
+  // get the closest point between the cylinder axis and the box
+  dVector3 pl,pb;
+  dClosestLineBoxPoints (p1,p2,c,R,side,pl,pb);
+
+  // generate contact point
+  return dCollideSpheres (pl,radius,pb,0,contact);
+}
+
+
+int dCollideCapsuleCapsule (dxGeom *o1, dxGeom *o2,
+                                int flags, dContactGeom *contact, int skip)
+{

+  dIASSERT (skip >= (int)sizeof(dContactGeom));

+  dIASSERT (o1->type == dCapsuleClass);

+  dIASSERT (o2->type == dCapsuleClass);

+  dIASSERT ((flags & NUMC_MASK) >= 1);

+
+  int i;
+  const dReal tolerance = REAL(1e-5);
+
+  dxCapsule *cyl1 = (dxCapsule*) o1;
+  dxCapsule *cyl2 = (dxCapsule*) o2;
+
+  contact->g1 = o1;
+  contact->g2 = o2;
+
+  // copy out some variables, for convenience
+  dReal lz1 = cyl1->lz * REAL(0.5);
+  dReal lz2 = cyl2->lz * REAL(0.5);
+  dReal *pos1 = o1->final_posr->pos;
+  dReal *pos2 = o2->final_posr->pos;
+  dReal axis1[3],axis2[3];
+  axis1[0] = o1->final_posr->R[2];
+  axis1[1] = o1->final_posr->R[6];
+  axis1[2] = o1->final_posr->R[10];
+  axis2[0] = o2->final_posr->R[2];
+  axis2[1] = o2->final_posr->R[6];
+  axis2[2] = o2->final_posr->R[10];
+
+  // if the cylinder axes are close to parallel, we'll try to detect up to
+  // two contact points along the body of the cylinder. if we can't find any
+  // points then we'll fall back to the closest-points algorithm. note that
+  // we are not treating this special case for reasons of degeneracy, but
+  // because we want two contact points in some situations. the closet-points
+  // algorithm is robust in all casts, but it can return only one contact.
+
+  dVector3 sphere1,sphere2;
+  dReal a1a2 = dDOT (axis1,axis2);
+  dReal det = REAL(1.0)-a1a2*a1a2;
+  if (det < tolerance) {
+    // the cylinder axes (almost) parallel, so we will generate up to two
+    // contacts. alpha1 and alpha2 (line position parameters) are related by:
+    //       alpha2 =   alpha1 + (pos1-pos2)'*axis1   (if axis1==axis2)
+    //    or alpha2 = -(alpha1 + (pos1-pos2)'*axis1)  (if axis1==-axis2)
+    // first compute where the two cylinders overlap in alpha1 space:
+    if (a1a2 < 0) {
+      axis2[0] = -axis2[0];
+      axis2[1] = -axis2[1];
+      axis2[2] = -axis2[2];
+    }
+    dReal q[3];
+    for (i=0; i<3; i++) q[i] = pos1[i]-pos2[i];
+    dReal k = dDOT (axis1,q);
+    dReal a1lo = -lz1;
+    dReal a1hi = lz1;
+    dReal a2lo = -lz2 - k;
+    dReal a2hi = lz2 - k;
+    dReal lo = (a1lo > a2lo) ? a1lo : a2lo;
+    dReal hi = (a1hi < a2hi) ? a1hi : a2hi;
+    if (lo <= hi) {
+      int num_contacts = flags & NUMC_MASK;
+      if (num_contacts >= 2 && lo < hi) {
+        // generate up to two contacts. if one of those contacts is
+        // not made, fall back on the one-contact strategy.
+        for (i=0; i<3; i++) sphere1[i] = pos1[i] + lo*axis1[i];
+        for (i=0; i<3; i++) sphere2[i] = pos2[i] + (lo+k)*axis2[i];
+        int n1 = dCollideSpheres (sphere1,cyl1->radius,
+                                  sphere2,cyl2->radius,contact);
+        if (n1) {
+          for (i=0; i<3; i++) sphere1[i] = pos1[i] + hi*axis1[i];
+          for (i=0; i<3; i++) sphere2[i] = pos2[i] + (hi+k)*axis2[i];
+          dContactGeom *c2 = CONTACT(contact,skip);
+          int n2 = dCollideSpheres (sphere1,cyl1->radius,
+                                    sphere2,cyl2->radius, c2);
+          if (n2) {
+            c2->g1 = o1;
+            c2->g2 = o2;
+            return 2;
+          }
+        }
+      }
+
+      // just one contact to generate, so put it in the middle of
+      // the range
+      dReal alpha1 = (lo + hi) * REAL(0.5);
+      dReal alpha2 = alpha1 + k;
+      for (i=0; i<3; i++) sphere1[i] = pos1[i] + alpha1*axis1[i];
+      for (i=0; i<3; i++) sphere2[i] = pos2[i] + alpha2*axis2[i];
+      return dCollideSpheres (sphere1,cyl1->radius,
+                              sphere2,cyl2->radius,contact);
+    }
+  }
+          
+  // use the closest point algorithm
+  dVector3 a1,a2,b1,b2;
+  a1[0] = o1->final_posr->pos[0] + axis1[0]*lz1;
+  a1[1] = o1->final_posr->pos[1] + axis1[1]*lz1;
+  a1[2] = o1->final_posr->pos[2] + axis1[2]*lz1;
+  a2[0] = o1->final_posr->pos[0] - axis1[0]*lz1;
+  a2[1] = o1->final_posr->pos[1] - axis1[1]*lz1;
+  a2[2] = o1->final_posr->pos[2] - axis1[2]*lz1;
+  b1[0] = o2->final_posr->pos[0] + axis2[0]*lz2;
+  b1[1] = o2->final_posr->pos[1] + axis2[1]*lz2;
+  b1[2] = o2->final_posr->pos[2] + axis2[2]*lz2;
+  b2[0] = o2->final_posr->pos[0] - axis2[0]*lz2;
+  b2[1] = o2->final_posr->pos[1] - axis2[1]*lz2;
+  b2[2] = o2->final_posr->pos[2] - axis2[2]*lz2;
+
+  dClosestLineSegmentPoints (a1,a2,b1,b2,sphere1,sphere2);
+  return dCollideSpheres (sphere1,cyl1->radius,sphere2,cyl2->radius,contact);
+}
+
+
+int dCollideCapsulePlane (dxGeom *o1, dxGeom *o2, int flags,
+                            dContactGeom *contact, int skip)
+{
+  dIASSERT (skip >= (int)sizeof(dContactGeom));
+  dIASSERT (o1->type == dCapsuleClass);
+  dIASSERT (o2->type == dPlaneClass);
+  dIASSERT ((flags & NUMC_MASK) >= 1);

+

+  dxCapsule *ccyl = (dxCapsule*) o1;
+  dxPlane *plane = (dxPlane*) o2;
+
+  // collide the deepest capping sphere with the plane
+  dReal sign = (dDOT14 (plane->p,o1->final_posr->R+2) > 0) ? REAL(-1.0) : REAL(1.0);
+  dVector3 p;
+  p[0] = o1->final_posr->pos[0] + o1->final_posr->R[2]  * ccyl->lz * REAL(0.5) * sign;
+  p[1] = o1->final_posr->pos[1] + o1->final_posr->R[6]  * ccyl->lz * REAL(0.5) * sign;
+  p[2] = o1->final_posr->pos[2] + o1->final_posr->R[10] * ccyl->lz * REAL(0.5) * sign;
+
+  dReal k = dDOT (p,plane->p);
+  dReal depth = plane->p[3] - k + ccyl->radius;
+  if (depth < 0) return 0;
+  contact->normal[0] = plane->p[0];
+  contact->normal[1] = plane->p[1];
+  contact->normal[2] = plane->p[2];
+  contact->pos[0] = p[0] - plane->p[0] * ccyl->radius;
+  contact->pos[1] = p[1] - plane->p[1] * ccyl->radius;
+  contact->pos[2] = p[2] - plane->p[2] * ccyl->radius;
+  contact->depth = depth;
+
+  int ncontacts = 1;
+  if ((flags & NUMC_MASK) >= 2) {
+    // collide the other capping sphere with the plane
+    p[0] = o1->final_posr->pos[0] - o1->final_posr->R[2]  * ccyl->lz * REAL(0.5) * sign;
+    p[1] = o1->final_posr->pos[1] - o1->final_posr->R[6]  * ccyl->lz * REAL(0.5) * sign;
+    p[2] = o1->final_posr->pos[2] - o1->final_posr->R[10] * ccyl->lz * REAL(0.5) * sign;
+
+    k = dDOT (p,plane->p);
+    depth = plane->p[3] - k + ccyl->radius;
+    if (depth >= 0) {
+      dContactGeom *c2 = CONTACT(contact,skip);
+      c2->normal[0] = plane->p[0];
+      c2->normal[1] = plane->p[1];
+      c2->normal[2] = plane->p[2];
+      c2->pos[0] = p[0] - plane->p[0] * ccyl->radius;
+      c2->pos[1] = p[1] - plane->p[1] * ccyl->radius;
+      c2->pos[2] = p[2] - plane->p[2] * ccyl->radius;
+      c2->depth = depth;
+      ncontacts = 2;
+    }
+  }
+
+  for (int i=0; i < ncontacts; i++) {
+    CONTACT(contact,i*skip)->g1 = o1;
+    CONTACT(contact,i*skip)->g2 = o2;
+  }
+  return ncontacts;
+}
+