9 files changed, 0 insertions, 1127 deletions
diff --git a/libraries/ode-0.9/contrib/OdeModelProcessor/LICENSE-BSD.TXT b/libraries/ode-0.9/contrib/OdeModelProcessor/LICENSE-BSD.TXT
deleted file mode 100644
index b2b1995..0000000
--- a/libraries/ode-0.9/contrib/OdeModelProcessor/LICENSE-BSD.TXT
+++ /dev/null
@@ -1,37 +0,0 @@
-This is the BSD-style license for The ODE Model Processor
----------------------------------------------------------
-The ODE Model Processor
-Copyright (c) 2007, Department Of Information Science,
-University of Otago, Dunedin, New Zealand.
-All rights reserved.
-Author: Richard Barrington <barri662@student.otago.ac.nz>
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:
-Redistributions of source code must retain the above copyright notice,
-this list of conditions and the following disclaimer.
-Redistributions in binary form must reproduce the above copyright notice,
-this list of conditions and the following disclaimer in the documentation
-and/or other materials provided with the distribution.
-Neither the names of the copyright owner nor the names of its
-contributors may be used to endorse or promote products derived from
-this software without specific prior written permission.
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
-TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
diff --git a/libraries/ode-0.9/contrib/OdeModelProcessor/LICENSE.TXT b/libraries/ode-0.9/contrib/OdeModelProcessor/LICENSE.TXT
deleted file mode 100644
index cfe59bc..0000000
--- a/libraries/ode-0.9/contrib/OdeModelProcessor/LICENSE.TXT
+++ /dev/null
@@ -1,502 +0,0 @@
-                  GNU LESSER GENERAL PUBLIC LICENSE
-                       Version 2.1, February 1999
- Copyright (C) 1991, 1999 Free Software Foundation, Inc.
-     59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-[This is the first released version of the Lesser GPL.  It also counts
- as the successor of the GNU Library Public License, version 2, hence
- the version number 2.1.]
-                            Preamble
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-Licenses are intended to guarantee your freedom to share and change
-free software--to make sure the software is free for all its users.
-  This license, the Lesser General Public License, applies to some
-specially designated software packages--typically libraries--of the
-Free Software Foundation and other authors who decide to use it.  You
-can use it too, but we suggest you first think carefully about whether
-this license or the ordinary General Public License is the better
-strategy to use in any particular case, based on the explanations below.
-  When we speak of free software, we are referring to freedom of use,
-not price.  Our General Public Licenses are designed to make sure that
-you have the freedom to distribute copies of free software (and charge
-for this service if you wish); that you receive source code or can get
-it if you want it; that you can change the software and use pieces of
-it in new free programs; and that you are informed that you can do
-these things.
-  To protect your rights, we need to make restrictions that forbid
-distributors to deny you these rights or to ask you to surrender these
-rights.  These restrictions translate to certain responsibilities for
-you if you distribute copies of the library or if you modify it.
-  For example, if you distribute copies of the library, whether gratis
-or for a fee, you must give the recipients all the rights that we gave
-you.  You must make sure that they, too, receive or can get the source
-code.  If you link other code with the library, you must provide
-complete object files to the recipients, so that they can relink them
-with the library after making changes to the library and recompiling
-it.  And you must show them these terms so they know their rights.
-  We protect your rights with a two-step method: (1) we copyright the
-library, and (2) we offer you this license, which gives you legal
-permission to copy, distribute and/or modify the library.
-  To protect each distributor, we want to make it very clear that
-there is no warranty for the free library.  Also, if the library is
-modified by someone else and passed on, the recipients should know
-that what they have is not the original version, so that the original
-author's reputation will not be affected by problems that might be
-introduced by others.
-  Finally, software patents pose a constant threat to the existence of
-any free program.  We wish to make sure that a company cannot
-effectively restrict the users of a free program by obtaining a
-restrictive license from a patent holder.  Therefore, we insist that
-any patent license obtained for a version of the library must be
-consistent with the full freedom of use specified in this license.
-  Most GNU software, including some libraries, is covered by the
-ordinary GNU General Public License.  This license, the GNU Lesser
-General Public License, applies to certain designated libraries, and
-is quite different from the ordinary General Public License.  We use
-this license for certain libraries in order to permit linking those
-libraries into non-free programs.
-  When a program is linked with a library, whether statically or using
-a shared library, the combination of the two is legally speaking a
-combined work, a derivative of the original library.  The ordinary
-General Public License therefore permits such linking only if the
-entire combination fits its criteria of freedom.  The Lesser General
-Public License permits more lax criteria for linking other code with
-the library.
-  We call this license the "Lesser" General Public License because it
-does Less to protect the user's freedom than the ordinary General
-Public License.  It also provides other free software developers Less
-of an advantage over competing non-free programs.  These disadvantages
-are the reason we use the ordinary General Public License for many
-libraries.  However, the Lesser license provides advantages in certain
-special circumstances.
-  For example, on rare occasions, there may be a special need to
-encourage the widest possible use of a certain library, so that it becomes
-a de-facto standard.  To achieve this, non-free programs must be
-allowed to use the library.  A more frequent case is that a free
-library does the same job as widely used non-free libraries.  In this
-case, there is little to gain by limiting the free library to free
-software only, so we use the Lesser General Public License.
-  In other cases, permission to use a particular library in non-free
-programs enables a greater number of people to use a large body of
-free software.  For example, permission to use the GNU C Library in
-non-free programs enables many more people to use the whole GNU
-operating system, as well as its variant, the GNU/Linux operating
-system.
-  Although the Lesser General Public License is Less protective of the
-users' freedom, it does ensure that the user of a program that is
-linked with the Library has the freedom and the wherewithal to run
-that program using a modified version of the Library.
-  The precise terms and conditions for copying, distribution and
-modification follow.  Pay close attention to the difference between a
-"work based on the library" and a "work that uses the library".  The
-former contains code derived from the library, whereas the latter must
-be combined with the library in order to run.
-                  GNU LESSER GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-  0. This License Agreement applies to any software library or other
-program which contains a notice placed by the copyright holder or
-other authorized party saying it may be distributed under the terms of
-this Lesser General Public License (also called "this License").
-Each licensee is addressed as "you".
-  A "library" means a collection of software functions and/or data
-prepared so as to be conveniently linked with application programs
-(which use some of those functions and data) to form executables.
-  The "Library", below, refers to any such software library or work
-which has been distributed under these terms.  A "work based on the
-Library" means either the Library or any derivative work under
-copyright law: that is to say, a work containing the Library or a
-portion of it, either verbatim or with modifications and/or translated
-straightforwardly into another language.  (Hereinafter, translation is
-included without limitation in the term "modification".)
-  "Source code" for a work means the preferred form of the work for
-making modifications to it.  For a library, complete source code means
-all the source code for all modules it contains, plus any associated
-interface definition files, plus the scripts used to control compilation
-and installation of the library.
-  Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running a program using the Library is not restricted, and output from
-such a program is covered only if its contents constitute a work based
-on the Library (independent of the use of the Library in a tool for
-writing it).  Whether that is true depends on what the Library does
-and what the program that uses the Library does.
-  
-  1. You may copy and distribute verbatim copies of the Library's
-complete source code as you receive it, in any medium, provided that
-you conspicuously and appropriately publish on each copy an
-appropriate copyright notice and disclaimer of warranty; keep intact
-all the notices that refer to this License and to the absence of any
-warranty; and distribute a copy of this License along with the
-Library.
-  You may charge a fee for the physical act of transferring a copy,
-and you may at your option offer warranty protection in exchange for a
-fee.
-  2. You may modify your copy or copies of the Library or any portion
-of it, thus forming a work based on the Library, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-    a) The modified work must itself be a software library.
-    b) You must cause the files modified to carry prominent notices
-    stating that you changed the files and the date of any change.
-    c) You must cause the whole of the work to be licensed at no
-    charge to all third parties under the terms of this License.
-    d) If a facility in the modified Library refers to a function or a
-    table of data to be supplied by an application program that uses
-    the facility, other than as an argument passed when the facility
-    is invoked, then you must make a good faith effort to ensure that,
-    in the event an application does not supply such function or
-    table, the facility still operates, and performs whatever part of
-    its purpose remains meaningful.
-    (For example, a function in a library to compute square roots has
-    a purpose that is entirely well-defined independent of the
-    application.  Therefore, Subsection 2d requires that any
-    application-supplied function or table used by this function must
-    be optional: if the application does not supply it, the square
-    root function must still compute square roots.)
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Library,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Library, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote
-it.
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Library.
-In addition, mere aggregation of another work not based on the Library
-with the Library (or with a work based on the Library) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-  3. You may opt to apply the terms of the ordinary GNU General Public
-License instead of this License to a given copy of the Library.  To do
-this, you must alter all the notices that refer to this License, so
-that they refer to the ordinary GNU General Public License, version 2,
-instead of to this License.  (If a newer version than version 2 of the
-ordinary GNU General Public License has appeared, then you can specify
-that version instead if you wish.)  Do not make any other change in
-these notices.
-  Once this change is made in a given copy, it is irreversible for
-that copy, so the ordinary GNU General Public License applies to all
-subsequent copies and derivative works made from that copy.
-  This option is useful when you wish to copy part of the code of
-the Library into a program that is not a library.
-  4. You may copy and distribute the Library (or a portion or
-derivative of it, under Section 2) in object code or executable form
-under the terms of Sections 1 and 2 above provided that you accompany
-it with the complete corresponding machine-readable source code, which
-must be distributed under the terms of Sections 1 and 2 above on a
-medium customarily used for software interchange.
-  If distribution of object code is made by offering access to copy
-from a designated place, then offering equivalent access to copy the
-source code from the same place satisfies the requirement to
-distribute the source code, even though third parties are not
-compelled to copy the source along with the object code.
-  5. A program that contains no derivative of any portion of the
-Library, but is designed to work with the Library by being compiled or
-linked with it, is called a "work that uses the Library".  Such a
-work, in isolation, is not a derivative work of the Library, and
-therefore falls outside the scope of this License.
-  However, linking a "work that uses the Library" with the Library
-creates an executable that is a derivative of the Library (because it
-contains portions of the Library), rather than a "work that uses the
-library".  The executable is therefore covered by this License.
-Section 6 states terms for distribution of such executables.
-  When a "work that uses the Library" uses material from a header file
-that is part of the Library, the object code for the work may be a
-derivative work of the Library even though the source code is not.
-Whether this is true is especially significant if the work can be
-linked without the Library, or if the work is itself a library.  The
-threshold for this to be true is not precisely defined by law.
-  If such an object file uses only numerical parameters, data
-structure layouts and accessors, and small macros and small inline
-functions (ten lines or less in length), then the use of the object
-file is unrestricted, regardless of whether it is legally a derivative
-work.  (Executables containing this object code plus portions of the
-Library will still fall under Section 6.)
-  Otherwise, if the work is a derivative of the Library, you may
-distribute the object code for the work under the terms of Section 6.
-Any executables containing that work also fall under Section 6,
-whether or not they are linked directly with the Library itself.
-  6. As an exception to the Sections above, you may also combine or
-link a "work that uses the Library" with the Library to produce a
-work containing portions of the Library, and distribute that work
-under terms of your choice, provided that the terms permit
-modification of the work for the customer's own use and reverse
-engineering for debugging such modifications.
-  You must give prominent notice with each copy of the work that the
-Library is used in it and that the Library and its use are covered by
-this License.  You must supply a copy of this License.  If the work
-during execution displays copyright notices, you must include the
-copyright notice for the Library among them, as well as a reference
-directing the user to the copy of this License.  Also, you must do one
-of these things:
-    a) Accompany the work with the complete corresponding
-    machine-readable source code for the Library including whatever
-    changes were used in the work (which must be distributed under
-    Sections 1 and 2 above); and, if the work is an executable linked
-    with the Library, with the complete machine-readable "work that
-    uses the Library", as object code and/or source code, so that the
-    user can modify the Library and then relink to produce a modified
-    executable containing the modified Library.  (It is understood
-    that the user who changes the contents of definitions files in the
-    Library will not necessarily be able to recompile the application
-    to use the modified definitions.)
-    b) Use a suitable shared library mechanism for linking with the
-    Library.  A suitable mechanism is one that (1) uses at run time a
-    copy of the library already present on the user's computer system,
-    rather than copying library functions into the executable, and (2)
-    will operate properly with a modified version of the library, if
-    the user installs one, as long as the modified version is
-    interface-compatible with the version that the work was made with.
-    c) Accompany the work with a written offer, valid for at
-    least three years, to give the same user the materials
-    specified in Subsection 6a, above, for a charge no more
-    than the cost of performing this distribution.
-    d) If distribution of the work is made by offering access to copy
-    from a designated place, offer equivalent access to copy the above
-    specified materials from the same place.
-    e) Verify that the user has already received a copy of these
-    materials or that you have already sent this user a copy.
-  For an executable, the required form of the "work that uses the
-Library" must include any data and utility programs needed for
-reproducing the executable from it.  However, as a special exception,
-the materials to be distributed need not include anything that is
-normally distributed (in either source or binary form) with the major
-components (compiler, kernel, and so on) of the operating system on
-which the executable runs, unless that component itself accompanies
-the executable.
-  It may happen that this requirement contradicts the license
-restrictions of other proprietary libraries that do not normally
-accompany the operating system.  Such a contradiction means you cannot
-use both them and the Library together in an executable that you
-distribute.
-  7. You may place library facilities that are a work based on the
-Library side-by-side in a single library together with other library
-facilities not covered by this License, and distribute such a combined
-library, provided that the separate distribution of the work based on
-the Library and of the other library facilities is otherwise
-permitted, and provided that you do these two things:
-    a) Accompany the combined library with a copy of the same work
-    based on the Library, uncombined with any other library
-    facilities.  This must be distributed under the terms of the
-    Sections above.
-    b) Give prominent notice with the combined library of the fact
-    that part of it is a work based on the Library, and explaining
-    where to find the accompanying uncombined form of the same work.
-  8. You may not copy, modify, sublicense, link with, or distribute
-the Library except as expressly provided under this License.  Any
-attempt otherwise to copy, modify, sublicense, link with, or
-distribute the Library is void, and will automatically terminate your
-rights under this License.  However, parties who have received copies,
-or rights, from you under this License will not have their licenses
-terminated so long as such parties remain in full compliance.
-  9. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Library or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Library (or any work based on the
-Library), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Library or works based on it.
-  10. Each time you redistribute the Library (or any work based on the
-Library), the recipient automatically receives a license from the
-original licensor to copy, distribute, link with or modify the Library
-subject to these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties with
-this License.
-  11. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Library at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Library by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Library.
-If any portion of this section is held invalid or unenforceable under any
-particular circumstance, the balance of the section is intended to apply,
-and the section as a whole is intended to apply in other circumstances.
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-  12. If the distribution and/or use of the Library is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Library under this License may add
-an explicit geographical distribution limitation excluding those countries,
-so that distribution is permitted only in or among countries not thus
-excluded.  In such case, this License incorporates the limitation as if
-written in the body of this License.
-  13. The Free Software Foundation may publish revised and/or new
-versions of the Lesser General Public License from time to time.
-Such new versions will be similar in spirit to the present version,
-but may differ in detail to address new problems or concerns.
-Each version is given a distinguishing version number.  If the Library
-specifies a version number of this License which applies to it and
-"any later version", you have the option of following the terms and
-conditions either of that version or of any later version published by
-the Free Software Foundation.  If the Library does not specify a
-license version number, you may choose any version ever published by
-the Free Software Foundation.
-  14. If you wish to incorporate parts of the Library into other free
-programs whose distribution conditions are incompatible with these,
-write to the author to ask for permission.  For software which is
-copyrighted by the Free Software Foundation, write to the Free
-Software Foundation; we sometimes make exceptions for this.  Our
-decision will be guided by the two goals of preserving the free status
-of all derivatives of our free software and of promoting the sharing
-and reuse of software generally.
-                            NO WARRANTY
-  15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
-WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
-EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
-OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
-KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
-LIBRARY IS WITH YOU.  SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
-THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
-  16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
-WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
-AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
-FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
-CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
-LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
-RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
-FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
-SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
-DAMAGES.
-                     END OF TERMS AND CONDITIONS
-           How to Apply These Terms to Your New Libraries
-  If you develop a new library, and you want it to be of the greatest
-possible use to the public, we recommend making it free software that
-everyone can redistribute and change.  You can do so by permitting
-redistribution under these terms (or, alternatively, under the terms of the
-ordinary General Public License).
-  To apply these terms, attach the following notices to the library.  It is
-safest to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least the
-"copyright" line and a pointer to where the full notice is found.
-    <one line to give the library's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-    This library is free software; you can redistribute it and/or
-    modify it under the terms of the GNU Lesser General Public
-    License as published by the Free Software Foundation; either
-    version 2.1 of the License, or (at your option) any later version.
-    This library is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-    Lesser General Public License for more details.
-    You should have received a copy of the GNU Lesser General Public
-    License along with this library; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-Also add information on how to contact you by electronic and paper mail.
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the library, if
-necessary.  Here is a sample; alter the names:
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the
-  library `Frob' (a library for tweaking knobs) written by James Random Hacker.
-  <signature of Ty Coon>, 1 April 1990
-  Ty Coon, President of Vice
-That's all there is to it!
diff --git a/libraries/ode-0.9/contrib/OdeModelProcessor/OdeModelProcessor.sln b/libraries/ode-0.9/contrib/OdeModelProcessor/OdeModelProcessor.sln
deleted file mode 100644
index 6a3f521..0000000
--- a/libraries/ode-0.9/contrib/OdeModelProcessor/OdeModelProcessor.sln
+++ /dev/null
@@ -1,20 +0,0 @@
-Microsoft Visual Studio Solution File, Format Version 9.00
-# Visual C# Express 2005
-Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "OdeModelProcessor", "OdeModelProcessor\OdeModelProcessor.csproj", "{246F3075-FEE3-45F9-8CB6-47DADBFFD1F2}"
-EndProject
-Global
-        GlobalSection(SolutionConfigurationPlatforms) = preSolution
-                Debug|Any CPU = Debug|Any CPU
-                Release|Any CPU = Release|Any CPU
-        EndGlobalSection
-        GlobalSection(ProjectConfigurationPlatforms) = postSolution
-                {246F3075-FEE3-45F9-8CB6-47DADBFFD1F2}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
-                {246F3075-FEE3-45F9-8CB6-47DADBFFD1F2}.Debug|Any CPU.Build.0 = Debug|Any CPU
-                {246F3075-FEE3-45F9-8CB6-47DADBFFD1F2}.Release|Any CPU.ActiveCfg = Release|Any CPU
-                {246F3075-FEE3-45F9-8CB6-47DADBFFD1F2}.Release|Any CPU.Build.0 = Release|Any CPU
-        EndGlobalSection
-        GlobalSection(SolutionProperties) = preSolution
-                HideSolutionNode = FALSE
-        EndGlobalSection
-EndGlobal
diff --git a/libraries/ode-0.9/contrib/OdeModelProcessor/OdeModelProcessor/OdeModelProcessor.cs b/libraries/ode-0.9/contrib/OdeModelProcessor/OdeModelProcessor/OdeModelProcessor.cs
deleted file mode 100644
index 9c974eb..0000000
--- a/libraries/ode-0.9/contrib/OdeModelProcessor/OdeModelProcessor/OdeModelProcessor.cs
+++ /dev/null
@@ -1,354 +0,0 @@
-/*
- * The ODE Model Processor
- * -----------------------
- * 
- * Copyright 2007, Department of Information Science,
- * University of Otago, Dunedin, New Zealand.
- * 
- * Author: Richard Barrington <barri662@student.otago.ac.nz>
- * 
- * This is a Content Processor and Tag library written for use with
- * Microsoft Visual C# 2005 Express Edition and Microsoft XNA Game 
- * Studio Express 1.0.
- * 
- * It can be used to read .x model vertex and index data before 
- * insertion into the content pipeline. This is used to build ODE
- * Triangle Meshes which are then used for collision detection that
- * is more accurate than the default XNA bounding boxes or spheres.
- * 
- * Usage is simple:
- * Build the library and reference the DLL in your project.
- * Add the DLL to the Content Pipeline
- * Set the content processor for you .x models to OdeModelProcessor.
- * 
- * Create triangle meshes as follows:
- * 1) Create a space, but only one for all of models.
- * 2) Create a triangle data.
- * 3) Load the model.
- * 4) Retreive the tag from the model.
- * 6) Build the triangle mesh by calling d.GeomTriMeshDataBuildSimple.
- * 
- * Eg:
- * IntPtr space = d.SimpleSpaceCreate(IntPtr.Zero);
- * IntPtr triangleData = d.GeomTriMeshDataCreate();
- * Model obj = content.Load<Model>("Content\\mycube");
- * OdeTag tag = (OdeTag)obj.Tag;
- * IntPtr vertexArray = tag.getVertices();
- * IntPtr indexArray = tag.getIndices();
- * d.GeomTriMeshDataBuildSimple
- * (
- *     triangleData,
- *     vertexArray, tag.getVertexStride(), tag.getVertexCount(),
- *     indexArray, tag.getIndexCount(), tag.getIndexStride()
- * );
- * IntPtr triangleMesh = d.CreateTriMesh(space, triangleData, null, null, null);
- * 
- * You can load multiple models and test for collisions with something
- * like this in the update method:
- * 
- * d.GeomSetPosition(odeTri1, obj1Position.X, obj1Position.Y, obj1Position.Z);
- * d.GeomSetPosition(odeTri2, obj2Position.X, obj2Position.Y, obj2Position.Z);
- * int numberOfContacts = d.Collide(odeTri1, odeTri2, ODE_CONTACTS,
- *     contactGeom, d.ContactGeom.SizeOf);
- * 
- * Where odeTri1 and odeTri2 are triangle meshes you've created, obj1Position
- * and obj2Position are the positions of your rendered models in the scene,
- * ODE_CONTACTS is a constant defining the maximum number of contacts
- * to test for, contactGeom is a d.ContactGeom[] of length ODE_CONTACTS.
- * 
- * If numberOfContacts is greater than 0, you have a collision.
- * 
- * Other ODE functions such as d.SpaceCollide() also work; see ODE.NET BoxTest.cs.
- * 
- * This library is free software; you can redistribute it and/or
- * modify it under the same terms as the ODE and ODE.Net libraries.
- * Specifically, the terms are one of EITHER:
- * 
- *   (1) The GNU Lesser General Public License as published by the Free
- *       Software Foundation; either version 2.1 of the License, or (at
- *       your option) any later version. The text of the GNU Lesser
- *       General Public License is included with this library in the
- *       file LICENSE.TXT.
- * 
- *   (2) The BSD-style license that is included with this library in
- *       the file LICENSE-BSD.TXT.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the files
- * LICENSE.TXT and LICENSE-BSD.TXT for more details.
- * 
- */
-using System;
-using System.Collections.Generic;
-using System.Text;
-using Microsoft.Xna.Framework;
-using Microsoft.Xna.Framework.Content;
-using Microsoft.Xna.Framework.Graphics;
-using Microsoft.Xna.Framework.Design;
-using Microsoft.Xna.Framework.Content.Pipeline;
-using Microsoft.Xna.Framework.Content.Pipeline.Graphics;
-using Microsoft.Xna.Framework.Content.Pipeline.Processors;
-using Microsoft.Xna.Framework.Content.Pipeline.Serialization.Compiler;
-using Ode.NET;
-using System.Runtime.InteropServices;
-namespace OdeModelProcessor
-{
-    /*
-     * Container for vertex and index data in a format
-     * that ODE.Net can use
-     */
-    public class OdeTag
-    {
-        private float[] vertexData;
-        private int[] indexData;
-        private const int indexStride = (sizeof(int));
-        private const int vertexStride = (3 * sizeof(float));
-        /* Constructors */
-        public OdeTag()
-        {
-            vertexData = new float[0];
-            indexData = new int[0];
-        }
-        
-        public OdeTag(float[] vertexData, int[] indexData)
-        {
-            this.vertexData = vertexData;
-            this.indexData = indexData;
-        }
-        
-        /* Data setter */
-        public void setData(float[] vertexData, int[] indexData)
-        {
-            this.vertexData = vertexData;
-            this.indexData = indexData;
-        }
-        /* Data appenders */
-        public void appendVertexData(float[] vertexData)
-        {
-            int newVertexDataLength = vertexData.Length;
-            float[] tempVertexArray = new float[newVertexDataLength + this.vertexData.Length];
-            this.vertexData.CopyTo(tempVertexArray, 0);
-            vertexData.CopyTo(tempVertexArray, this.vertexData.Length);
-            this.vertexData = tempVertexArray;
-        }
-        public void appendIndexData(int[] indexData)
-        {
-            int newIndexDataLength = indexData.Length;
-            int[] tempIndexArray = new int[newIndexDataLength + this.indexData.Length];
-            this.indexData.CopyTo(tempIndexArray, 0);
-            indexData.CopyTo(tempIndexArray, this.indexData.Length);
-            this.indexData = tempIndexArray;
-        }
-        /* Data getters */
-        public float[] getVertexData()
-        {
-            return this.vertexData;
-        }
-        public int[] getIndexData()
-        {
-            return this.indexData;
-        }
-        /* Native data getters */
-        public IntPtr getVertices()
-        {
-            int count = getVertexData().Length;
-            int memsize = count * Marshal.SizeOf(getVertexData()[0].GetType());
-            IntPtr pointer = Marshal.AllocCoTaskMem(memsize);
-            Marshal.Copy(getVertexData(), 0, pointer, count);
-            return pointer;
-        }
-        public IntPtr getIndices()
-        {
-            int count = getIndexData().Length;
-            int memsize = count * Marshal.SizeOf(getIndexData()[0].GetType());
-            IntPtr pointer = Marshal.AllocCoTaskMem(memsize);
-            Marshal.Copy(getIndexData(), 0, pointer, count);
-            return pointer;
-        }
-        /* Count getters */
-        public int getVertexCount()
-        {
-            return vertexData.Length/3;
-        }
-        public int getIndexCount()
-        {
-            return indexData.Length;
-        }
-        /* Stride getters */
-        public int getVertexStride()
-        {
-            return vertexStride;
-        }
-        public int getIndexStride()
-        {
-            return indexStride;
-        }
-        /*
-         * Convienience method to build the mesh and return it. The triangleData
-         * is passed in to allow the calling application to delete it afterwards.
-         *
-         * Be sure to destroy the returned TriangleMesh in the client application.
-         * 
-         * Can't destroy the index and vertex arrays here though, so best to handle
-         * this manually - only use this method if nothing else makes sense.
-         */ 
-        public IntPtr getTriangleMesh(IntPtr space, IntPtr triangleData)
-        {
-            d.GeomTriMeshDataBuildSimple(
-                triangleData,
-                getVertices(), getVertexStride(), getVertexCount(),
-                getIndices(), getIndexCount(), getIndexStride()
-            );
-            return d.CreateTriMesh(space, triangleData, null, null, null);
-        }
-    }
-    /*
-     * Subclass of the XNA .x model processor, which creates and appends a tag
-     * containing vertex and index data for ODE.Net to use.
-     */ 
-    [ContentProcessor]
-    public class OdeModelProcessor : ModelProcessor
-    {
-        private OdeTag tag;
-        private int indexOffset = 0;
-        public override ModelContent Process(NodeContent input, ContentProcessorContext context)
-        {
-            tag = new OdeTag();
-            GenerateVerticesRecursive( input );
-            ModelContent model = base.Process(input, context);
-            model.Tag = tag;
-            indexOffset = 0;
-            return model;
-        }
-        public void GenerateVerticesRecursive(NodeContent input)
-        {
-            
-            MeshContent mesh = input as MeshContent;
-            
-            if (mesh != null)
-            {
-                GeometryContentCollection gc = mesh.Geometry;
-                foreach (GeometryContent g in gc)
-                {
-                    VertexContent vc = g.Vertices;
-                    IndirectPositionCollection ipc = vc.Positions;
-                    IndexCollection ic = g.Indices;
-                    float[] vertexData = new float[ipc.Count * 3];
-                    for (int i = 0; i < ipc.Count; i++)
-                    {
-                        
-                        Vector3 v0 = ipc[i];
-                        vertexData[(i * 3) + 0] = v0.X;
-                        vertexData[(i * 3) + 1] = v0.Y;
-                        vertexData[(i * 3) + 2] = v0.Z;                        
-                        
-                    }
-                    int[] indexData = new int[ic.Count];
-                    for (int j = 0; j < ic.Count; j ++)
-                    {
-                        indexData[j] = ic[j] + indexOffset;
-                    }
-                    tag.appendVertexData(vertexData);
-                    tag.appendIndexData(indexData);
-                    indexOffset += ipc.Count;
-                }
-                
-            }
-            foreach (NodeContent child in input.Children)
-            {
-                GenerateVerticesRecursive(child);
-            }
-        }
-    }
-    /* Writer for the OdeTag class */
-    [ContentTypeWriter]
-    public class OdeTagWriter : ContentTypeWriter<OdeTag>
-    {
-        protected override void Write(ContentWriter output, OdeTag value)
-        {
-            float[] vertexData = value.getVertexData();
-            int[] indexData = value.getIndexData();
-            output.Write(vertexData.Length);
-            output.Write(indexData.Length);
-            for (int j = 0; j < vertexData.Length; j++)
-            {
-                output.Write(vertexData[j]);
-            }
-            for (int i = 0; i < indexData.Length; i++)
-            {
-                output.Write(indexData[i]);
-            }
-        }
-        public override string GetRuntimeType(TargetPlatform targetPlatform)
-        {
-            return typeof(OdeTag).AssemblyQualifiedName;
-        }
-        public override string GetRuntimeReader(TargetPlatform targetPlatform)
-        {
-            return "OdeModelProcessor.OdeTagReader, OdeModelProcessor, Version=1.0.0.0, Culture=neutral";
-        }
-    }
-    /* Reader for the OdeTag class */
-    public class OdeTagReader : ContentTypeReader<OdeTag>
-    {
-        protected override OdeTag Read(ContentReader input, OdeTag existingInstance)
-        {
-            float[] vertexData = new float[input.ReadInt32()];
-            int[] indexData = new int[input.ReadInt32()];
-            for (int j = 0; j < vertexData.Length; j++)
-            {
-                vertexData[j] = input.ReadSingle();
-            }
-            for (int i = 0; i < indexData.Length; i++)
-            {
-                indexData[i] = input.ReadInt32();
-            }
-            OdeTag tag = null;
-            if (existingInstance == null)
-            {
-                tag = new OdeTag(vertexData, indexData);
-            }
-            else
-            {
-                tag = existingInstance;
-                tag.setData(vertexData, indexData);
-            }
-            return tag;
-        }
-    }
-}
diff --git a/libraries/ode-0.9/contrib/OdeModelProcessor/OdeModelProcessor/OdeModelProcessor.csproj b/libraries/ode-0.9/contrib/OdeModelProcessor/OdeModelProcessor/OdeModelProcessor.csproj
deleted file mode 100644
index 3a36a12..0000000
--- a/libraries/ode-0.9/contrib/OdeModelProcessor/OdeModelProcessor/OdeModelProcessor.csproj
+++ /dev/null
@@ -1,69 +0,0 @@
-<Project DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <PropertyGroup>
-    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
-    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
-    <ProductVersion>8.0.50727</ProductVersion>
-    <SchemaVersion>2.0</SchemaVersion>
-    <ProjectGuid>{246F3075-FEE3-45F9-8CB6-47DADBFFD1F2}</ProjectGuid>
-    <OutputType>Library</OutputType>
-    <AppDesignerFolder>Properties</AppDesignerFolder>
-    <RootNamespace>OdeModelProcessor</RootNamespace>
-    <AssemblyName>OdeModelProcessor</AssemblyName>
-  </PropertyGroup>
-  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
-    <DebugSymbols>true</DebugSymbols>
-    <DebugType>full</DebugType>
-    <Optimize>false</Optimize>
-    <OutputPath>bin\Debug\</OutputPath>
-    <DefineConstants>DEBUG</DefineConstants>
-    <ErrorReport>prompt</ErrorReport>
-    <WarningLevel>4</WarningLevel>
-    <AllowUnsafeBlocks>false</AllowUnsafeBlocks>
-    <UseVSHostingProcess>false</UseVSHostingProcess>
-  </PropertyGroup>
-  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
-    <DebugType>pdbonly</DebugType>
-    <Optimize>true</Optimize>
-    <OutputPath>bin\Release\</OutputPath>
-    <DefineConstants>
-    </DefineConstants>
-    <ErrorReport>prompt</ErrorReport>
-    <WarningLevel>4</WarningLevel>
-    <AllowUnsafeBlocks>false</AllowUnsafeBlocks>
-    <UseVSHostingProcess>false</UseVSHostingProcess>
-  </PropertyGroup>
-  <ItemGroup>
-    <Reference Include="Microsoft.Xna.Framework, Version=1.0.0.0, Culture=neutral, PublicKeyToken=6d5c3888ef60e27d, processorArchitecture=x86" />
-    <Reference Include="Microsoft.Xna.Framework.Content.Pipeline, Version=1.0.0.0, Culture=neutral, PublicKeyToken=6d5c3888ef60e27d, processorArchitecture=x86" />
-    <Reference Include="Ode.NET, Version=0.7.0.0, Culture=neutral, processorArchitecture=MSIL">
-      <SpecificVersion>False</SpecificVersion>
-      <HintPath>..\..\ODE\Ode.NET-0.8\bin\Release\Ode.NET.dll</HintPath>
-    </Reference>
-    <Reference Include="System" />
-    <Reference Include="System.Data" />
-    <Reference Include="System.Xml" />
-  </ItemGroup>
-  <ItemGroup>
-    <Compile Include="OdeModelProcessor.cs" />
-    <Compile Include="Properties\AssemblyInfo.cs" />
-    <Compile Include="Properties\Settings.Designer.cs">
-      <AutoGen>True</AutoGen>
-      <DesignTimeSharedInput>True</DesignTimeSharedInput>
-      <DependentUpon>Settings.settings</DependentUpon>
-    </Compile>
-  </ItemGroup>
-  <ItemGroup>
-    <None Include="Properties\Settings.settings">
-      <Generator>SettingsSingleFileGenerator</Generator>
-      <LastGenOutput>Settings.Designer.cs</LastGenOutput>
-    </None>
-  </ItemGroup>
-  <Import Project="$(MSBuildBinPath)\Microsoft.CSharp.targets" />
-  <!-- To modify your build process, add your task inside one of the targets below and uncomment it. 
-       Other similar extension points exist, see Microsoft.Common.targets.
-  <Target Name="BeforeBuild">
-  </Target>
-  <Target Name="AfterBuild">
-  </Target>
-  -->
-</Project>
-\ No newline at end of file
diff --git a/libraries/ode-0.9/contrib/OdeModelProcessor/OdeModelProcessor/Properties/AssemblyInfo.cs b/libraries/ode-0.9/contrib/OdeModelProcessor/OdeModelProcessor/Properties/AssemblyInfo.cs
deleted file mode 100644
index 1ecad3e..0000000
--- a/libraries/ode-0.9/contrib/OdeModelProcessor/OdeModelProcessor/Properties/AssemblyInfo.cs
+++ /dev/null
@@ -1,35 +0,0 @@
-using System.Reflection;
-using System.Runtime.CompilerServices;
-using System.Runtime.InteropServices;
-// General Information about an assembly is controlled through the following 
-// set of attributes. Change these attribute values to modify the information
-// associated with an assembly.
-[assembly: AssemblyTitle("OdeModelProcessor")]
-[assembly: AssemblyDescription("")]
-[assembly: AssemblyConfiguration("")]
-[assembly: AssemblyCompany("")]
-[assembly: AssemblyProduct("OdeModelProcessor")]
-[assembly: AssemblyCopyright("Copyright ©  2007")]
-[assembly: AssemblyTrademark("")]
-[assembly: AssemblyCulture("")]
-// Setting ComVisible to false makes the types in this assembly not visible 
-// to COM components.  If you need to access a type in this assembly from 
-// COM, set the ComVisible attribute to true on that type.
-[assembly: ComVisible(false)]
-// The following GUID is for the ID of the typelib if this project is exposed to COM
-[assembly: Guid("29c5609a-cd5f-480b-b4ef-5c11de022268")]
-// Version information for an assembly consists of the following four values:
-//
-//      Major Version
-//      Minor Version 
-//      Build Number
-//      Revision
-//
-// You can specify all the values or you can default the Revision and Build Numbers 
-// by using the '*' as shown below:
-[assembly: AssemblyVersion("1.0.0.0")]
-[assembly: AssemblyFileVersion("1.0.0.0")]
diff --git a/libraries/ode-0.9/contrib/OdeModelProcessor/OdeModelProcessor/Properties/Settings.Designer.cs b/libraries/ode-0.9/contrib/OdeModelProcessor/OdeModelProcessor/Properties/Settings.Designer.cs
deleted file mode 100755
index 6ab60a8..0000000
--- a/libraries/ode-0.9/contrib/OdeModelProcessor/OdeModelProcessor/Properties/Settings.Designer.cs
+++ /dev/null
@@ -1,26 +0,0 @@
-//------------------------------------------------------------------------------
-// <auto-generated>
-//     This code was generated by a tool.
-//     Runtime Version:2.0.50727.832
-//
-//     Changes to this file may cause incorrect behavior and will be lost if
-//     the code is regenerated.
-// </auto-generated>
-//------------------------------------------------------------------------------
-namespace OdeModelProcessor.Properties {
-    
-    
-    [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()]
-    [global::System.CodeDom.Compiler.GeneratedCodeAttribute("Microsoft.VisualStudio.Editors.SettingsDesigner.SettingsSingleFileGenerator", "8.0.0.0")]
-    internal sealed partial class Settings : global::System.Configuration.ApplicationSettingsBase {
-        
-        private static Settings defaultInstance = ((Settings)(global::System.Configuration.ApplicationSettingsBase.Synchronized(new Settings())));
-        
-        public static Settings Default {
-            get {
-                return defaultInstance;
-            }
-        }
-    }
-}
diff --git a/libraries/ode-0.9/contrib/OdeModelProcessor/OdeModelProcessor/Properties/Settings.settings b/libraries/ode-0.9/contrib/OdeModelProcessor/OdeModelProcessor/Properties/Settings.settings
deleted file mode 100755
index 15034e7..0000000
--- a/libraries/ode-0.9/contrib/OdeModelProcessor/OdeModelProcessor/Properties/Settings.settings
+++ /dev/null
@@ -1,6 +0,0 @@
-<?xml version='1.0' encoding='utf-8'?>
-<SettingsFile xmlns="http://schemas.microsoft.com/VisualStudio/2004/01/settings" CurrentProfile="(Default)">
-  <Profiles>
-    <Profile Name="(Default)" />
-  </Profiles>
-</SettingsFile>
diff --git a/libraries/ode-0.9/contrib/OdeModelProcessor/README.TXT b/libraries/ode-0.9/contrib/OdeModelProcessor/README.TXT
deleted file mode 100644
index 97683f9..0000000
--- a/libraries/ode-0.9/contrib/OdeModelProcessor/README.TXT
+++ /dev/null
@@ -1,78 +0,0 @@
-The ODE Model Processor
-----------------------
-Copyright 2007, Department of Information Science,
-University of Otago, Dunedin, New Zealand.
-Author: Richard Barrington <barri662@student.otago.ac.nz>
-This is a Content Processor and Tag library written for use with
-Microsoft Visual C# 2005 Express Edition and Microsoft XNA Game 
-Studio Express 1.0.
-It can be used to read .x model vertex and index data before 
-insertion into the content pipeline. This is used to build ODE
-Triangle Meshes which are then used for collision detection that
-is more accurate than the default XNA bounding boxes or spheres.
-Usage is fairly simple:
-Build the library and reference the DLL in your project.
-Add the DLL to the Content Pipeline
-Set the content processor for you .x models to OdeModelProcessor.
-Create triangle meshes as follows:
-1) Create a space, but only one for all of models.
-2) Create a triangle data.
-3) Load the model.
-4) Retreive the tag from the model.
-6) Build the triangle mesh by calling d.GeomTriMeshDataBuildSimple.
-Eg:
-IntPtr space = d.SimpleSpaceCreate(IntPtr.Zero);
-IntPtr triangleData = d.GeomTriMeshDataCreate();
-Model obj = content.Load<Model>("Content\\mycube");
-OdeTag tag = (OdeTag)obj.Tag;
-IntPtr vertexArray = tag.getVertices();
-IntPtr indexArray = tag.getIndices();
-d.GeomTriMeshDataBuildSimple
-(
-        triangleData,
-        vertexArray, tag.getVertexStride(), tag.getVertexCount(),
-        indexArray, tag.getIndexCount(), tag.getIndexStride()
-);
-IntPtr triangleMesh = d.CreateTriMesh(space, triangleData, null, null, null);
-You can load multiple models and test for collisions with something
-like this in the update method:
-d.GeomSetPosition(odeTri1, obj1Position.X, obj1Position.Y, obj1Position.Z);
-d.GeomSetPosition(odeTri2, obj2Position.X, obj2Position.Y, obj2Position.Z);
-int numberOfContacts = d.Collide(odeTri1, odeTri2, ODE_CONTACTS,
-                           contactGeom, d.ContactGeom.SizeOf);
-Where odeTri1 and odeTri2 are triangle meshes you've created, obj1Position
-and obj2Position are the positions of your rendered models in the scene,
-ODE_CONTACTS is a constant defining the maximum number of contacts
-to test for, contactGeom is a d.ContactGeom[] of length ODE_CONTACTS.
-If numberOfContacts is greater than 0, you have a collision.
-Other ODE functions such as d.SpaceCollide() also work; see ODE.NET BoxTest.cs.
-This library is free software; you can redistribute it and/or
-modify it under the same terms as the ODE and ODE.Net libraries.
-Specifically, the terms are one of EITHER:
-  (1) The GNU Lesser General Public License as published by the Free
-      Software Foundation; either version 2.1 of the License, or (at
-      your option) any later version. The text of the GNU Lesser
-      General Public License is included with this library in the
-      file LICENSE.TXT.
-  (2) The BSD-style license that is included with this library in
-      the file LICENSE-BSD.TXT.
- 
-This library is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the files
-LICENSE.TXT and LICENSE-BSD.TXT for more details.