1 files changed, 211 insertions, 0 deletions

diff --git a/bin/config.preview.donotuseyet-v2/defaults/scriptengines.ini.defaults b/bin/config.preview.donotuseyet-v2/defaults/scriptengines.ini.defaults
new file mode 100644
index 0000000..c615581
--- /dev/null
+++ b/bin/config.preview.donotuseyet-v2/defaults/scriptengines.ini.defaults
@@ -0,0 +1,211 @@
+; Script engine settings
+
+
+[XEngine]
+    ; Enable this engine in this OpenSim instance
+    Enabled = true
+
+    ; How many threads to keep alive even if nothing is happening
+    MinThreads = 2
+
+    ; How many threads to start at maximum load
+    MaxThreads = 100
+
+    ; Time a thread must be idle (in seconds) before it dies
+    IdleTimeout = 60
+
+    ; Thread priority ("Lowest", "BelowNormal", "Normal", "AboveNormal", "Highest")
+    Priority = "BelowNormal"
+
+    ; Maximum number of events to queue for a script (excluding timers)
+    MaxScriptEventQueue = 300
+
+    ; Stack size per thread created
+    ThreadStackSize = 262144
+
+    ; Rate to poll for asynchronous command replies (ms)
+    ; currently unused
+    ;AsyncLLCommandLoopms = 50
+
+    ; Save the source of all compiled scripts
+    WriteScriptSourceToDebugFile = false
+
+    ; Default language for scripts
+    DefaultCompileLanguage = lsl
+
+    ; List of allowed languages (lsl,vb,js,cs)
+    ; AllowedCompilers=lsl,cs,js,vb.  
+    ; *warning*, non lsl languages have access to static methods such as System.IO.File.  Enable at your own risk.
+    AllowedCompilers=lsl
+
+    ; Compile debug info (line numbers) into the script assemblies
+    CompileWithDebugInformation = true
+
+    ; Allow the use of os* functions (some are dangerous)
+    AllowOSFunctions = false
+
+    ; Threat level to allow, one of None, VeryLow, Low, Moderate, High, VeryHigh, Severe
+    OSFunctionThreatLevel = VeryLow
+
+    ; Interval (s) between background save of script states
+    SaveInterval = 120
+
+    ; Interval (s) between maintenance runs (0 = disable)
+    MaintenanceInterval = 10
+
+    ; Time a script can spend in an event handler before it is interrupted
+    EventLimit = 30
+
+    ; If a script overruns it's event limit, kill the script?
+    KillTimedOutScripts = false
+
+    ; Sets the multiplier for the scripting delays
+    ScriptDelayFactor = 1.0
+
+    ; The factor the 10 m distances llimits are multiplied by
+    ScriptDistanceLimitFactor = 1.0
+
+    ; OS Functions enable/disable
+    ; For each function, you can add one line, as shown
+    ; The default for all functions allows them if below threat level
+
+    ; true allows the use of the function unconditionally
+    ; Allow_osSetRegionWaterHeight = true
+
+    ; false disables the function completely
+    ; Allow_osSetRegionWaterHeight = false
+
+    ; Comma separated list of UUIDS allows the function for that list of UUIDS
+    ; Allow_osSetRegionWaterHeight = 888760cb-a3cf-43ac-8ea4-8732fd3ee2bb
+
+    ; Allow for llCreateLink and llBreakLink to work without asking for permission 
+    ; only enable this in a trusted environment otherwise you may be subject to hijacking
+    ; AutomaticLinkPermission = false
+
+
+[ScriptEngine.DotNetEngine]
+    Enabled = true
+
+    ScriptDelayFactor = 1.0
+    ScriptDistanceLimitFactor = 1.0
+
+    ;
+    ; These settings are specific to DotNetEngine script engine
+    ; Other script engines based on OpenSim.Region.ScriptEngine.Common.dll will have almost identical settings, but in another section of this config file.
+    ;
+
+    ; When a script receives an event the event is queued.
+    ; Any free thread will start executing this event. One script can only have one event executed simultaneously.
+    ; If you have only one thread, and one script has a loop or does a lot of work, then no other scripts can run at the same time.
+    ; Same if you have 10 threads, then only 10 scripts can be run simultaneously.
+    ; But because most scripts exit after their task, the threads are free to go on to the next script.
+
+    ; Refresh ScriptEngine config options (these settings) every xx seconds
+    ; 0 = Do not refresh
+    ; Set it to number of seconds between refresh, for example 30.
+    ; Will allow you to change ScriptEngine settings while server is running just by using "CONFIG SET" on console
+    ; For example to increase or decrease number of threads: CONFIG SET NumberOfScriptThreads 10
+    ; NOTE! Disabled for now. Feature does not work.
+    RefreshConfig=0
+
+    ; Number of threads to use for script event execution
+    ; Threads are shared across all regions
+    NumberOfScriptThreads=2
+
+    ; Script event execution thread priority inside application.
+    ; Valid values: Lowest, BelowNormal, Normal, AboveNormal, Highest
+    ScriptThreadPriority=BelowNormal
+
+    ; How long MAX should a script event be allowed to run (per event execution)?
+    ; Do not set this too low (like 50ms) as there are some time wasted in simply executing a function
+    ; There is also a small speed penalty for every kill that is made
+    MaxEventExecutionTimeMs=5000
+
+    ; Should we enable the max script event execution thread to look for scripts that exceed their timeslice?
+    EnforceMaxEventExecutionTime=true
+
+    ; Should we stop the script completely when time exceeds?
+    ; This is useful if you have a high <MaxEventExecutionTimeMs> and want to deactivate scripts that go wrong
+    ; Note that for example physics engine can slow down the system and make scripts spend more time
+    DeactivateScriptOnTimeout=false
+
+    ; If no scripts have executed in this pass how long should we sleep before checking again
+    ; Impact:
+    ; Too low and you will waste lots of CPU
+    ; Too high and people touching object or similar will have to wait up to this amount of time before script responding
+    SleepTimeIfNoScriptExecutionMs=50
+
+    ; AppDomains are used for two things:
+    ; * Security: Scripts inside AppDomains are limited in permissions.
+    ; * Script unloading: When a script is deactivated it can not be unloaded. Only whole AppDomains can be unloaded.
+    ;                     AppDomains are therefore only unloaded once ALL active scripts inside it has been deactivated (removed from prims).
+    ; Each AppDomain has some memory overhead. But leaving dead scripts in memory also has memory overhead.
+    ScriptsPerAppDomain=1
+
+    ; MaintenanceLoop
+    ; How often to run maintenance loop
+    ; Maintenance loop is doing: script compile/load, script unload, reload config, adjust running config and enforce max execution time
+    MaintenanceLoopms=50
+
+    ; How many maintenanceloops between each of these.
+    ; (if 2 then function will be executed every MaintenanceLoopms*2 ms)
+    ; Script loading/unloading
+
+    ; How long load/unload thread should sleep if there is nothing to do
+    ; Higher value makes it respond slower when scripts are added/removed from prims
+    ; But once active it will process all in queue before sleeping again
+    MaintenanceLoopTicks_ScriptLoadUnload=1
+
+    ; Other tasks
+    ; check if we need to reload config, adjust running config and enforce max execution time
+    MaintenanceLoopTicks_Other=10
+
+    ; Allow the use of os* functions (some are dangerous)
+    ; Default is false
+    AllowOSFunctions = false
+
+    ; Threat level to allow if os functions are enabled
+    ; One of None, VeryLow, Low, Moderate, High, VeryHigh, Severe
+    ; Default is VeryLow
+    OSFunctionThreatLevel = VeryLow
+
+    ; Maximum number of items in load/unload queue before we start rejecting loads
+    ; Note that we will only be rejecting load. Unloads will still be able to queue.
+    LoadUnloadMaxQueueSize=100
+
+    ; Maximum number of (LSL) events that can be queued before new events are ignored.
+    EventExecutionMaxQueueSize=300
+
+    ; Async LL command sleep
+    ; If no async LL commands are waiting, how long should thread sleep before checking again
+    ; Async LL commands are LSL-commands that causes an event to be fired back with result
+    ; currently unused
+    ; AsyncLLCommandLoopms=50
+
+    ; When script is converted from LSL to C#, or just plain compiled, a copy of the script source will be put in the ScriptEngine folder
+    WriteScriptSourceToDebugFile=false
+
+    ; Specify default script compiler
+    ; If you do not specify //cs, //vb, //js or //lsl tag as the first characters of your script then the default compiler will be chosen
+    ; Valid languages are: lsl, cs, js and vb
+    DefaultCompileLanguage=lsl
+
+    ; Specify what compilers are allowed to be used
+    ; Note vb only works on Windows for now (Mono lacks VB compile support)
+    ; Valid languages are: lsl, cs, js and vb
+    ; AllowedCompilers=lsl,cs,js,vb.  *warning*, non lsl languages have access to static methods such as System.IO.File.  Enable at your own risk.
+    AllowedCompilers=lsl
+
+    ; Compile scripts with debugging
+    ; Probably a thousand times slower, but gives you a line number when something goes wrong.
+    CompileWithDebugInformation=true
+
+    ; Remove old scripts on next startup
+    ; currently unused
+    ;CleanUpOldScriptsOnStartup=true
+
+
+[MRM]
+    ; Enables the Mini Region Modules Script Engine. WARNING: SECURITY RISK.
+    ; default is false
+          Enabled = false