1 files changed, 153 insertions, 0 deletions
diff --git a/bin/AssetServer.ini.example b/bin/AssetServer.ini.example
new file mode 100644
index 0000000..f346624
--- /dev/null
+++ b/bin/AssetServer.ini.example
@@ -0,0 +1,153 @@
+[Config]
+; The port number for the asset server to listen on. If a valid SSL certificate
+; file is given for SSLCertFile, the HTTPS protocol will be used. Otherwise, the
+; HTTP protocol is used.
+ListenPort = 8003
+; An SSL certificate file for the server. If a valid raw certificate or PKCS#12
+; file is given the server will run in HTTPS mode.
+;SSLCertFile = server.p12
+[Extensions]
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Storage Providers
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Simple storage is a very basic storage system for the purposes of illustrating
+; a storage backend example. The assets are stored in SimpleAssets/ and 
+; TempAssets/ (which is deleted when the server shuts down). Metadata is
+; generated for all of the files at startup and when new assets are uploaded.
+;SimpleStorage
+; OpenSimMySQL storage connects to a MySQL server that has an assets table created
+; by OpenSim. Open the AssetServer_Config.xml file from OpenSim and use the
+; database connection string for the database_connect option in the MySQL section
+; below. This backend combined with the OpenSimFrontend will allow the asset 
+; server to be used as a drop-in replacement for OpenSim.Grid.AssetServer.exe, 
+; while also allowing other frontends to run.
+OpenSimMySQLStorage
+; Uses Amazon.com's Simple Storage Service (http://aws.amazon.com/s3/) to store
+; asset data and metadata. This backend does not handle any data requests, as the
+; data is stored remotely and metadata replies will contain the amazon.com URL
+; holding the actual asset data. Your Access Key ID and Secret Access Key must be
+; set in the [Amazon] section below for this backend to function. If
+; UseCloudFront is true and your Amazon account has CloudFront enabled, 
+; CloudFront URLs will be returned in metadata instead of normal S3 URLs.
+;AmazonS3Storage
+; Uses memcached (http://www.danga.com/memcached/) as a caching layer on top of
+; another storage backend. If you use this, make sure you enable another storage
+; provider as the actual backend, and that the MemcacheStorage line appears in 
+; this config file after the other storage provider.
+;MemcachedStorage
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Inventory Providers
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Simple inventory is a very basic inventory storage system for the purposes of
+; illustrating an inventory backend example. The inventory is stored in 
+; SimpleInventory/ by creating a folder for each agent that contains all of the
+; inventory items and folders serialized as XML files.
+;SimpleInventory
+; OpenSimMySQL inventory connects to a MySQL server that has an inventory table
+; created by OpenSim. If the OpenSimMySQLStorage backend is also being used, the
+; inventory and asset tables must be stored in the same database. The 
+; database_connect string in the MySQL section below is used to connect to the 
+; database. This backend combined with the OpenSimInventoryFrontend will allow
+; the server to be used as a drop-in replacement for 
+; OpenSim.Grid.InventoryServer.exe, while also allowing other frontends to run.
+OpenSimMySQLInventory
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Authentication Providers
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; OpenID provides a direct method of authenticating with the asset server. Users
+; can provide credentials and receive a session token directly from the asset 
+; server. The OpenIdAuth module provides a browser-based form login and an 
+; XML-based API, both accessible through the URL /authenticate.
+;OpenIdAuth
+NullAuthentication
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Authorization Providers
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Authorize all is a dummy authorization module that allows all requests for
+; metadata, data, and asset creation. Use this extension if your primary
+; storage provider or front-end interface does not support authentication.
+AuthorizeAll
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Metrics Providers
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; NullMetrics contains empty logging functions. Use this metrics provider if
+; you want to disable metrics collection and reporting.
+NullMetrics
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Frontends
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; A simple frontend that provides three basic REST methods. /assetid/metadata
+; will return the metadata for an asset (currently in LLSD format, that will
+; change soon). /assetid/data will return the raw asset data with proper
+; Content-Type and Content-Disposition headers to make downloading assets in a
+; web browser easy.
+ReferenceFrontend
+; A frontend that matches the existing OpenSim XML for transferring grid
+; assets. This will allow the asset server to function as a drop-in replacement
+; for OpenSim.Grid.AssetServer.exe, and can be combined with OpenSimMySQLStorage
+; to provide an identical replacement or any other storage backend.
+OpenSimFrontend
+; A frontend that matches the existing OpenSim XML for handling inventory
+; transactions. This will allow the asset server to function as a drop-in
+; replacement for OpenSim.Grid.InventoryServer.exe, and can be combined with 
+; OpenSimMySQLInventory to provide an identical replacement or any other 
+; inventory backend.
+OpenSimInventoryFrontend
+; An HTML interface for browsing through the asset store
+BrowseFrontend
+[MySQL]
+; Database connection string used by the OpenSim MySQL backend. If this line is
+; commented out or missing, the server will look for an AssetServer_Config.xml 
+; in the current working directory. This file is generated by 
+; OpenSim.Grid.AssetServer.exe and can be used without modification.
+database_connect = "Server=localhost; Database=opensim; User=changeme; Password=changeme;"
+[Amazon]
+; Get these values by logging in to your Amazon S3 account and going to
+; https://aws-portal.amazon.com/gp/aws/developer/account/index.html?ie=UTF8&action=access-key
+AccessKeyID = xxxxxxxxxxxxxxxxxxxx
+SecretAccessKey = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+; The bucket, or namespace, in your Amazon S3 account for storing assets in.
+; Bucket names on S3 are global identifiers, and must be unique. Think up 
+; something clever or random.
+BucketName = changeme
+; Amazon CloudFront is a Content Distribution Network for S3 stores. If this is
+; set to true, AmazonS3Storage will try to locate the first available CloudFront
+; distribution tied to the active S3 bucket. If no usable distribution is found,
+; a new one will be created.
+UseCloudFront = true
+[Memcached]
+; A comma-separated list of the memcached servers that make up your caching
+; pool. Each server is a hostname or IP address, optionally followed by a 
+; colon and port number if the server is not listening on the default 11211
+; port.
+Servers = localhost

diff --git a/bin/AssetServer.ini.example b/bin/AssetServer.ini.example new file mode 100644 index 0000000..f346624 --- /dev/null +++ b/bin/AssetServer.ini.example
@@ -0,0 +1,153 @@
	1	[Config]
	2
	3	; The port number for the asset server to listen on. If a valid SSL certificate
	4	; file is given for SSLCertFile, the HTTPS protocol will be used. Otherwise, the
	5	; HTTP protocol is used.
	6	ListenPort = 8003
	7
	8	; An SSL certificate file for the server. If a valid raw certificate or PKCS#12
	9	; file is given the server will run in HTTPS mode.
	10	;SSLCertFile = server.p12
	11
	12	[Extensions]
	13
	14	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
	15	; Storage Providers
	16	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
	17
	18	; Simple storage is a very basic storage system for the purposes of illustrating
	19	; a storage backend example. The assets are stored in SimpleAssets/ and
	20	; TempAssets/ (which is deleted when the server shuts down). Metadata is
	21	; generated for all of the files at startup and when new assets are uploaded.
	22	;SimpleStorage
	23
	24	; OpenSimMySQL storage connects to a MySQL server that has an assets table created
	25	; by OpenSim. Open the AssetServer_Config.xml file from OpenSim and use the
	26	; database connection string for the database_connect option in the MySQL section
	27	; below. This backend combined with the OpenSimFrontend will allow the asset
	28	; server to be used as a drop-in replacement for OpenSim.Grid.AssetServer.exe,
	29	; while also allowing other frontends to run.
	30	OpenSimMySQLStorage
	31
	32	; Uses Amazon.com's Simple Storage Service (http://aws.amazon.com/s3/) to store
	33	; asset data and metadata. This backend does not handle any data requests, as the
	34	; data is stored remotely and metadata replies will contain the amazon.com URL
	35	; holding the actual asset data. Your Access Key ID and Secret Access Key must be
	36	; set in the [Amazon] section below for this backend to function. If
	37	; UseCloudFront is true and your Amazon account has CloudFront enabled,
	38	; CloudFront URLs will be returned in metadata instead of normal S3 URLs.
	39	;AmazonS3Storage
	40
	41	; Uses memcached (http://www.danga.com/memcached/) as a caching layer on top of
	42	; another storage backend. If you use this, make sure you enable another storage
	43	; provider as the actual backend, and that the MemcacheStorage line appears in
	44	; this config file after the other storage provider.
	45	;MemcachedStorage
	46
	47	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
	48	; Inventory Providers
	49	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
	50
	51	; Simple inventory is a very basic inventory storage system for the purposes of
	52	; illustrating an inventory backend example. The inventory is stored in
	53	; SimpleInventory/ by creating a folder for each agent that contains all of the
	54	; inventory items and folders serialized as XML files.
	55	;SimpleInventory
	56
	57	; OpenSimMySQL inventory connects to a MySQL server that has an inventory table
	58	; created by OpenSim. If the OpenSimMySQLStorage backend is also being used, the
	59	; inventory and asset tables must be stored in the same database. The
	60	; database_connect string in the MySQL section below is used to connect to the
	61	; database. This backend combined with the OpenSimInventoryFrontend will allow
	62	; the server to be used as a drop-in replacement for
	63	; OpenSim.Grid.InventoryServer.exe, while also allowing other frontends to run.
	64	OpenSimMySQLInventory
	65
	66	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
	67	; Authentication Providers
	68	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
	69
	70	; OpenID provides a direct method of authenticating with the asset server. Users
	71	; can provide credentials and receive a session token directly from the asset
	72	; server. The OpenIdAuth module provides a browser-based form login and an
	73	; XML-based API, both accessible through the URL /authenticate.
	74	;OpenIdAuth
	75	NullAuthentication
	76
	77	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
	78	; Authorization Providers
	79	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
	80
	81	; Authorize all is a dummy authorization module that allows all requests for
	82	; metadata, data, and asset creation. Use this extension if your primary
	83	; storage provider or front-end interface does not support authentication.
	84	AuthorizeAll
	85
	86	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
	87	; Metrics Providers
	88	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
	89
	90	; NullMetrics contains empty logging functions. Use this metrics provider if
	91	; you want to disable metrics collection and reporting.
	92	NullMetrics
	93
	94	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
	95	; Frontends
	96	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
	97
	98	; A simple frontend that provides three basic REST methods. /assetid/metadata
	99	; will return the metadata for an asset (currently in LLSD format, that will
	100	; change soon). /assetid/data will return the raw asset data with proper
	101	; Content-Type and Content-Disposition headers to make downloading assets in a
	102	; web browser easy.
	103	ReferenceFrontend
	104
	105	; A frontend that matches the existing OpenSim XML for transferring grid
	106	; assets. This will allow the asset server to function as a drop-in replacement
	107	; for OpenSim.Grid.AssetServer.exe, and can be combined with OpenSimMySQLStorage
	108	; to provide an identical replacement or any other storage backend.
	109	OpenSimFrontend
	110
	111	; A frontend that matches the existing OpenSim XML for handling inventory
	112	; transactions. This will allow the asset server to function as a drop-in
	113	; replacement for OpenSim.Grid.InventoryServer.exe, and can be combined with
	114	; OpenSimMySQLInventory to provide an identical replacement or any other
	115	; inventory backend.
	116	OpenSimInventoryFrontend
	117
	118	; An HTML interface for browsing through the asset store
	119	BrowseFrontend
	120
	121	[MySQL]
	122
	123	; Database connection string used by the OpenSim MySQL backend. If this line is
	124	; commented out or missing, the server will look for an AssetServer_Config.xml
	125	; in the current working directory. This file is generated by
	126	; OpenSim.Grid.AssetServer.exe and can be used without modification.
	127	database_connect = "Server=localhost; Database=opensim; User=changeme; Password=changeme;"
	128
	129	[Amazon]
	130
	131	; Get these values by logging in to your Amazon S3 account and going to
	132	; https://aws-portal.amazon.com/gp/aws/developer/account/index.html?ie=UTF8&action=access-key
	133	AccessKeyID = xxxxxxxxxxxxxxxxxxxx
	134	SecretAccessKey = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
	135
	136	; The bucket, or namespace, in your Amazon S3 account for storing assets in.
	137	; Bucket names on S3 are global identifiers, and must be unique. Think up
	138	; something clever or random.
	139	BucketName = changeme
	140
	141	; Amazon CloudFront is a Content Distribution Network for S3 stores. If this is
	142	; set to true, AmazonS3Storage will try to locate the first available CloudFront
	143	; distribution tied to the active S3 bucket. If no usable distribution is found,
	144	; a new one will be created.
	145	UseCloudFront = true
	146
	147	[Memcached]
	148
	149	; A comma-separated list of the memcached servers that make up your caching
	150	; pool. Each server is a hostname or IP address, optionally followed by a
	151	; colon and port number if the server is not listening on the default 11211
	152	; port.
	153	Servers = localhost