6 files changed, 121 insertions, 121 deletions

diff --git a/OpenSim/Region/ScriptEngine/Common/LSL_BuiltIn_Commands.cs b/OpenSim/Region/ScriptEngine/Common/LSL_BuiltIn_Commands.cs
index 25c0d9a..9195063 100644
--- a/OpenSim/Region/ScriptEngine/Common/LSL_BuiltIn_Commands.cs
+++ b/OpenSim/Region/ScriptEngine/Common/LSL_BuiltIn_Commands.cs
@@ -361,23 +361,23 @@ namespace OpenSim.Region.ScriptEngine.Common
         a vector pointing along the X axis, first rotating it 3 degrees around the global Z axis, then rotating the resulting
         vector 2 degrees around the global Y axis, and finally rotating that 1 degree around the global X axis.
         */
-        
+
         /* How we arrived at this llEuler2Rot
-         * 
+         *
          * Experiment in SL to determine conventions:
          *   llEuler2Rot(<PI,0,0>)=<1,0,0,0>
          *   llEuler2Rot(<0,PI,0>)=<0,1,0,0>
          *   llEuler2Rot(<0,0,PI>)=<0,0,1,0>
-         * 
+         *
          * Important facts about Quaternions
          *  - multiplication is non-commutative (a*b != b*a)
          *  - http://en.wikipedia.org/wiki/Quaternion#Basis_multiplication
-         * 
+         *
          * Above SL experiment gives (c1,c2,c3,s1,s2,s3 as defined in our llEuler2Rot):
          *   Qx = c1+i*s1
          *   Qy = c2+j*s2;
          *   Qz = c3+k*s3;
-         * 
+         *
          * Rotations applied in order (from above) Z, Y, X
          * Q = (Qz * Qy) * Qx
          * ((c1+i*s1)*(c2+j*s2))*(c3+k*s3)
@@ -389,23 +389,23 @@ namespace OpenSim.Region.ScriptEngine.Common
          *          y=j*(c1*s2*c3-s1*c2*s3)
          *          z=k*(s1*s2*c3+c1*c2*s3)
          *          s=   c1*c2*c3-s1*s2*s3
-         * 
+         *
          * This implementation agrees with the functions found here:
          * http://lslwiki.net/lslwiki/wakka.php?wakka=LibraryRotationFunctions
          * And with the results in SL.
-         * 
+         *
          * It's also possible to calculate llEuler2Rot by direct multiplication of
          * the Qz, Qy, and Qx vectors (as above - and done in the "accurate" function
-         * from the wiki). 
-         * Apparently in some cases this is better from a numerical precision perspective? 
-         */ 
+         * from the wiki).
+         * Apparently in some cases this is better from a numerical precision perspective?
+         */
 
         public LSL_Types.Quaternion llEuler2Rot(LSL_Types.Vector3 v)
         {
             m_host.AddScriptLPS(1);
 
             double x,y,z,s;
-            
+
             double c1 = Math.Cos(v.x/2.0);
             double c2 = Math.Cos(v.y/2.0);
             double c3 = Math.Cos(v.z/2.0);
@@ -417,7 +417,7 @@ namespace OpenSim.Region.ScriptEngine.Common
             y = c1*s2*c3-s1*c2*s3;
             z = s1*s2*c3+c1*c2*s3;
             s = c1*c2*c3-s1*s2*s3;
-            
+
             return new LSL_Types.Quaternion(x, y, z, s);
         }
 
@@ -427,7 +427,7 @@ namespace OpenSim.Region.ScriptEngine.Common
             double x,y,z,s;
             int f=0;
             // Important Note: q1=<x,y,z,s> is equal to q2=<-x,-y,-z,-s>
-            // Computing quaternion x,y,z,s values        
+            // Computing quaternion x,y,z,s values
             x = ((fwd.x - left.y - up.z + 1) / 4);
             x *= x;
             x = Math.Sqrt(Math.Sqrt(x));
@@ -441,7 +441,7 @@ namespace OpenSim.Region.ScriptEngine.Common
             s *= s;
             s = Math.Sqrt(Math.Sqrt(s));
 
-            // Set f for signs detection         
+            // Set f for signs detection
             if (fwd.y+left.x >= 0){f+=1;}
             if (fwd.z+up.x >= 0){f+=2;}
             if (left.z-up.y >= 0){f+=4;}
@@ -510,7 +510,7 @@ namespace OpenSim.Region.ScriptEngine.Common
             x = 2 * (r.x * r.y - r.z * r.s);
             y = -r.x * r.x + r.y * r.y - r.z * r.z + r.s * r.s;
             z = 2 * (r.x * r.s + r.y * r.z);
-            return (new LSL_Types.Vector3(x, y, z)); 
+            return (new LSL_Types.Vector3(x, y, z));
         }
 
         public LSL_Types.Vector3 llRot2Up(LSL_Types.Quaternion r)
@@ -536,7 +536,7 @@ namespace OpenSim.Region.ScriptEngine.Common
             z = -r.x * r.x - r.y * r.y + r.z * r.z + r.s * r.s;
             return (new LSL_Types.Vector3(x, y, z));
         }
-        
+
         public LSL_Types.Quaternion llRotBetween(LSL_Types.Vector3 a, LSL_Types.Vector3 b)
         {
             //A and B should both be normalized
@@ -1215,7 +1215,7 @@ namespace OpenSim.Region.ScriptEngine.Common
 
         /// <summary>
         /// Set flexi parameters of a part.
-        /// 
+        ///
         /// FIXME: Much of this code should probably be within the part itself.
         /// </summary>
         /// <param name="part"></param>
@@ -1226,7 +1226,7 @@ namespace OpenSim.Region.ScriptEngine.Common
         /// <param name="wind"></param>
         /// <param name="tension"></param>
         /// <param name="Force"></param>
-        private void SetFlexi(SceneObjectPart part, bool flexi, int softness, float gravity, float friction, 
+        private void SetFlexi(SceneObjectPart part, bool flexi, int softness, float gravity, float friction,
             float wind, float tension, LSL_Types.Vector3 Force)
         {
             if (part == null)
@@ -1239,7 +1239,7 @@ namespace OpenSim.Region.ScriptEngine.Common
                 {
                     needs_fakedelete = true;
                 }
-                part.Shape.FlexiEntry = true;   // this setting flexi true isn't working, but the below parameters do 
+                part.Shape.FlexiEntry = true;   // this setting flexi true isn't working, but the below parameters do
                                                 // work once the prim is already flexi
                 part.Shape.FlexiSoftness = softness;
                 part.Shape.FlexiGravity = gravity;
@@ -1265,7 +1265,7 @@ namespace OpenSim.Region.ScriptEngine.Common
             if (needs_fakedelete)
             {
                 if (part.ParentGroup != null)
-                {                    
+                {
                     part.ParentGroup.FakeDeleteGroup();
                 }
             }
@@ -1276,7 +1276,7 @@ namespace OpenSim.Region.ScriptEngine.Common
 
         /// <summary>
         /// Set a light point on a part
-        /// 
+        ///
         /// FIXME: Much of this code should probably be in SceneObjectGroup
         /// </summary>
         /// <param name="part"></param>
@@ -1781,7 +1781,7 @@ namespace OpenSim.Region.ScriptEngine.Common
             m_host.SoundGain = volume;
             m_host.SoundFlags = 1;      // looping
             m_host.SoundRadius = 20;    // Magic number, 20 seems reasonable. Make configurable?
-            
+
             m_host.ScheduleFullUpdate();
             m_host.SendFullUpdateToAllClients();
         }
@@ -2908,13 +2908,13 @@ namespace OpenSim.Region.ScriptEngine.Common
             bool found = false;
             LLUUID destId = LLUUID.Zero;
             LLUUID objId = LLUUID.Zero;
-            
+
             if (!LLUUID.TryParse(destination, out destId))
             {
                 llSay(0, "Could not parse key " + destination);
                 return;
             }
-            
+
             // move the first object found with this inventory name
             foreach (KeyValuePair<LLUUID, TaskInventoryItem> inv in m_host.TaskInventory)
             {
@@ -2931,7 +2931,7 @@ namespace OpenSim.Region.ScriptEngine.Common
                 llSay(0, String.Format("Could not find object '{0}'", inventory));
                 throw new Exception(String.Format("The inventory object '{0}' could not be found", inventory));
             }
-            
+
             // check if destination is an avatar
             if (World.GetScenePresence(destId) != null)
             {
@@ -2993,7 +2993,7 @@ namespace OpenSim.Region.ScriptEngine.Common
                 {
                     LLUUID tid = m_ScriptEngine.m_ASYNCLSLCommandManager.m_Dataserver.RegisterRequest(
                         m_localID, m_itemID, item.AssetID.ToString());
-                    
+
                     LLVector3 region = new LLVector3(
                         World.RegionInfo.RegionLocX * Constants.RegionSize,
                         World.RegionInfo.RegionLocY * Constants.RegionSize,
@@ -4155,13 +4155,13 @@ namespace OpenSim.Region.ScriptEngine.Common
             if (LLUUID.TryParse(id,out key))
             {
                 ScenePresence presence = World.GetScenePresence(key);
-                
+
                 if (presence != null)
                 {
                     return presence.ControllingClient.Name;
                     //return presence.Name;
                 }
-                
+
                 if (World.GetSceneObjectPart(key) != null)
                 {
                     return World.GetSceneObjectPart(key).Name;
@@ -4516,7 +4516,7 @@ namespace OpenSim.Region.ScriptEngine.Common
         private Primitive.ParticleSystem getNewParticleSystemWithSLDefaultValues()
         {
             Primitive.ParticleSystem ps = new Primitive.ParticleSystem();
-            
+
             // TODO find out about the other defaults and add them here
             ps.PartStartColor = new LLColor(1.0f, 1.0f, 1.0f, 1.0f);
             ps.PartEndColor = new LLColor(1.0f, 1.0f, 1.0f, 1.0f);
@@ -4530,7 +4530,7 @@ namespace OpenSim.Region.ScriptEngine.Common
             ps.PartMaxAge = 10.0f;
             return ps;
         }
-        
+
         public void llParticleSystem(LSL_Types.list rules)
         {
             m_host.AddScriptLPS(1);
@@ -4725,7 +4725,7 @@ namespace OpenSim.Region.ScriptEngine.Common
                         itemList.Add(itemID);
                 }
             }
-            
+
             if (itemList.Count == 0)
                 return;
 
@@ -4973,7 +4973,7 @@ namespace OpenSim.Region.ScriptEngine.Common
         public void llSetRemoteScriptAccessPin(int pin)
         {
             m_host.AddScriptLPS(1);
-            
+
             m_host.ScriptAccessPin = pin;
         }
 
@@ -4983,19 +4983,19 @@ namespace OpenSim.Region.ScriptEngine.Common
             bool found = false;
             LLUUID destId = LLUUID.Zero;
             LLUUID srcId = LLUUID.Zero;
-            
+
             if (!LLUUID.TryParse(target, out destId))
             {
                 llSay(0, "Could not parse key " + target);
                 return;
             }
-            
+
             // target must be a different prim than the one containing the script
             if (m_host.UUID == destId)
             {
                 return;
             }
-            
+
             // copy the first script found with this inventory name
             foreach (KeyValuePair<LLUUID, TaskInventoryItem> inv in m_host.TaskInventory)
             {
@@ -5010,13 +5010,13 @@ namespace OpenSim.Region.ScriptEngine.Common
                     }
                 }
             }
-            
+
             if (!found)
             {
                 llSay(0, "Could not find script " + name);
                 return;
             }
-            
+
             // the rest of the permission checks are done in RezScript, so check the pin there as well
             World.RezScript(srcId, m_host, destId, pin, running, start_param);
             // this will cause the delay even if the script pin or permissions were wrong - seems ok
@@ -5066,11 +5066,11 @@ namespace OpenSim.Region.ScriptEngine.Common
             m_host.AddScriptLPS(1);
             return Util.Md5Hash(src + ":" + nonce.ToString());
         }
-        
+
         private ObjectShapePacket.ObjectDataBlock SetPrimitiveShapeParams(int holeshape, LSL_Types.Vector3 cut, float hollow, LSL_Types.Vector3 twist)
         {
             ObjectShapePacket.ObjectDataBlock shapeBlock = new ObjectShapePacket.ObjectDataBlock();
-            
+
             if (holeshape != (int)BuiltIn_Commands_BaseClass.PRIM_HOLE_DEFAULT &&
                 holeshape != (int)BuiltIn_Commands_BaseClass.PRIM_HOLE_CIRCLE &&
                 holeshape != (int)BuiltIn_Commands_BaseClass.PRIM_HOLE_SQUARE &&
@@ -5128,23 +5128,23 @@ namespace OpenSim.Region.ScriptEngine.Common
             }
             shapeBlock.PathTwistBegin = (sbyte)(200 * twist.x);
             shapeBlock.PathTwist = (sbyte)(200 * twist.y);
-            
+
             shapeBlock.ObjectLocalID = m_host.LocalId;
-            
+
             // retain pathcurve
-            shapeBlock.PathCurve = m_host.Shape.PathCurve; 
-            
+            shapeBlock.PathCurve = m_host.Shape.PathCurve;
+
             return shapeBlock;
         }
-        
+
         private void SetPrimitiveShapeParams(int holeshape, LSL_Types.Vector3 cut, float hollow, LSL_Types.Vector3 twist, LSL_Types.Vector3 taper_b, LSL_Types.Vector3 topshear, byte fudge)
         {
             ObjectShapePacket.ObjectDataBlock shapeBlock;
-            
+
             shapeBlock = SetPrimitiveShapeParams(holeshape, cut, hollow, twist);
-            
+
             shapeBlock.ProfileCurve += fudge;
-            
+
             if (taper_b.x < 0f)
             {
                 taper_b.x = 0f;
@@ -5181,25 +5181,25 @@ namespace OpenSim.Region.ScriptEngine.Common
             }
             shapeBlock.PathShearX = (byte)(100 * topshear.x);
             shapeBlock.PathShearY = (byte)(100 * topshear.y);
-            
+
             m_host.UpdateShape(shapeBlock);
         }
-        
+
         private void SetPrimitiveShapeParams(int holeshape, LSL_Types.Vector3 cut, float hollow, LSL_Types.Vector3 twist, LSL_Types.Vector3 dimple, byte fudge)
         {
             ObjectShapePacket.ObjectDataBlock shapeBlock;
-            
+
             shapeBlock = SetPrimitiveShapeParams(holeshape, cut, hollow, twist);
-            
+
             // profile/path swapped for a sphere
             shapeBlock.PathBegin = shapeBlock.ProfileBegin;
             shapeBlock.PathEnd = shapeBlock.ProfileEnd;
-            
+
             shapeBlock.ProfileCurve += fudge;
-            
+
             shapeBlock.PathScaleX = 100;
             shapeBlock.PathScaleY = 100;
-            
+
             if (dimple.x < 0f)
             {
                 dimple.x = 0f;
@@ -5222,22 +5222,22 @@ namespace OpenSim.Region.ScriptEngine.Common
             }
             shapeBlock.ProfileBegin = (ushort)(50000 * dimple.x);
             shapeBlock.ProfileEnd   = (ushort)(50000 * (1 - dimple.y));
-            
+
             m_host.UpdateShape(shapeBlock);
         }
-        
+
         private void SetPrimitiveShapeParams(int holeshape, LSL_Types.Vector3 cut, float hollow, LSL_Types.Vector3 twist, LSL_Types.Vector3 holesize, LSL_Types.Vector3 topshear, LSL_Types.Vector3 profilecut, LSL_Types.Vector3 taper_a, float revolutions, float radiusoffset, float skew, byte fudge)
         {
             ObjectShapePacket.ObjectDataBlock shapeBlock;
-            
+
             shapeBlock = SetPrimitiveShapeParams(holeshape, cut, hollow, twist);
-            
+
             shapeBlock.ProfileCurve += fudge;
 
             // profile/path swapped for a torrus, tube, ring
             shapeBlock.PathBegin = shapeBlock.ProfileBegin;
             shapeBlock.PathEnd = shapeBlock.ProfileEnd;
-            
+
             if (holesize.x < 0.05f)
             {
                 holesize.x = 0.05f;
@@ -5342,15 +5342,15 @@ namespace OpenSim.Region.ScriptEngine.Common
                 skew = 0.95f;
             }
             shapeBlock.PathSkew = (sbyte)(100 * skew);
-            
+
             m_host.UpdateShape(shapeBlock);
         }
-        
+
         private void SetPrimitiveShapeParams(string map, int type)
         {
             ObjectShapePacket.ObjectDataBlock shapeBlock = new ObjectShapePacket.ObjectDataBlock();
             LLUUID sculptId;
-            
+
             if (!LLUUID.TryParse(map, out sculptId))
             {
                 llSay(0, "Could not parse key " + map);
@@ -5360,7 +5360,7 @@ namespace OpenSim.Region.ScriptEngine.Common
             shapeBlock.ObjectLocalID = m_host.LocalId;
             shapeBlock.PathScaleX = 100;
             shapeBlock.PathScaleY = 150;
-            
+
             if (type != (int)BuiltIn_Commands_BaseClass.PRIM_SCULPT_TYPE_CYLINDER &&
                 type != (int)BuiltIn_Commands_BaseClass.PRIM_SCULPT_TYPE_PLANE &&
                 type != (int)BuiltIn_Commands_BaseClass.PRIM_SCULPT_TYPE_SPHERE &&
@@ -5369,7 +5369,7 @@ namespace OpenSim.Region.ScriptEngine.Common
                 // default
                 type = (int)BuiltIn_Commands_BaseClass.PRIM_SCULPT_TYPE_SPHERE;
             }
-            
+
             // retain pathcurve
             shapeBlock.PathCurve = m_host.Shape.PathCurve;
 
@@ -5422,7 +5422,7 @@ namespace OpenSim.Region.ScriptEngine.Common
 
                         v=new LSL_Types.Vector3(rules.Data[idx++].ToString());
                         SetScale(part, v);
-                        
+
                         break;
                     case (int)BuiltIn_Commands_BaseClass.PRIM_ROTATION:
                         if (remain < 1)
@@ -5432,13 +5432,13 @@ namespace OpenSim.Region.ScriptEngine.Common
                         SetRot(part, q);
 
                         break;
-                    
+
                     case (int)BuiltIn_Commands_BaseClass.PRIM_TYPE:
                         if (remain < 3)
                             return;
-                    
+
                         code = Convert.ToInt32(rules.Data[idx++]);
-                    
+
                         remain = rules.Length - idx;
                         float hollow;
                         LSL_Types.Vector3 twist;
@@ -5449,9 +5449,9 @@ namespace OpenSim.Region.ScriptEngine.Common
                         float skew;
                         LSL_Types.Vector3 holesize;
                         LSL_Types.Vector3 profilecut;
-                    
+
                         switch (code)
-                        {                        
+                        {
                             case (int)BuiltIn_Commands_BaseClass.PRIM_TYPE_BOX:
                                 if (remain < 6)
                                     return;
@@ -5465,7 +5465,7 @@ namespace OpenSim.Region.ScriptEngine.Common
                                 m_host.Shape.PathCurve = (byte) Extrusion.Straight;
                                 SetPrimitiveShapeParams(face, v, hollow, twist, taper_b, topshear, 1);
                                 break;
-                        
+
                             case (int)BuiltIn_Commands_BaseClass.PRIM_TYPE_CYLINDER:
                                 if (remain < 6)
                                     return;
@@ -5480,12 +5480,12 @@ namespace OpenSim.Region.ScriptEngine.Common
                                 m_host.Shape.PathCurve = (byte) Extrusion.Straight;
                                 SetPrimitiveShapeParams(face, v, hollow, twist, taper_b, topshear, 0);
                                 break;
-                        
+
                             case (int)BuiltIn_Commands_BaseClass.PRIM_TYPE_PRISM:
                                 if (remain < 6)
                                     return;
 
-                                face = Convert.ToInt32(rules.Data[idx++]); // holeshape 
+                                face = Convert.ToInt32(rules.Data[idx++]); // holeshape
                                 v = new LSL_Types.Vector3(rules.Data[idx++].ToString()); //cut
                                 hollow = (float)Convert.ToDouble(rules.Data[idx++]);
                                 twist = new LSL_Types.Vector3(rules.Data[idx++].ToString());
@@ -5507,12 +5507,12 @@ namespace OpenSim.Region.ScriptEngine.Common
                                 m_host.Shape.PathCurve = (byte) Extrusion.Curve1;
                                 SetPrimitiveShapeParams(face, v, hollow, twist, taper_b, 5);
                                 break;
-                        
+
                             case (int)BuiltIn_Commands_BaseClass.PRIM_TYPE_TORUS:
                                 if (remain < 11)
                                     return;
 
-                                face = Convert.ToInt32(rules.Data[idx++]); // holeshape 
+                                face = Convert.ToInt32(rules.Data[idx++]); // holeshape
                                 v = new LSL_Types.Vector3(rules.Data[idx++].ToString()); //cut
                                 hollow = (float)Convert.ToDouble(rules.Data[idx++]);
                                 twist = new LSL_Types.Vector3(rules.Data[idx++].ToString());
@@ -5526,12 +5526,12 @@ namespace OpenSim.Region.ScriptEngine.Common
                                 m_host.Shape.PathCurve = (byte) Extrusion.Curve1;
                                 SetPrimitiveShapeParams(face, v, hollow, twist, holesize, topshear, profilecut, taper_b, revolutions, radiusoffset, skew, 0);
                                 break;
-                        
+
                             case (int)BuiltIn_Commands_BaseClass.PRIM_TYPE_TUBE:
                                 if (remain < 11)
                                     return;
 
-                                face = Convert.ToInt32(rules.Data[idx++]); // holeshape 
+                                face = Convert.ToInt32(rules.Data[idx++]); // holeshape
                                 v = new LSL_Types.Vector3(rules.Data[idx++].ToString()); //cut
                                 hollow = (float)Convert.ToDouble(rules.Data[idx++]);
                                 twist = new LSL_Types.Vector3(rules.Data[idx++].ToString());
@@ -5545,12 +5545,12 @@ namespace OpenSim.Region.ScriptEngine.Common
                                 m_host.Shape.PathCurve = (byte) Extrusion.Curve1;
                                 SetPrimitiveShapeParams(face, v, hollow, twist, holesize, topshear, profilecut, taper_b, revolutions, radiusoffset, skew, 1);
                                 break;
-                        
+
                             case (int)BuiltIn_Commands_BaseClass.PRIM_TYPE_RING:
                                 if (remain < 11)
                                     return;
 
-                                face = Convert.ToInt32(rules.Data[idx++]); // holeshape 
+                                face = Convert.ToInt32(rules.Data[idx++]); // holeshape
                                 v = new LSL_Types.Vector3(rules.Data[idx++].ToString()); //cut
                                 hollow = (float)Convert.ToDouble(rules.Data[idx++]);
                                 twist = new LSL_Types.Vector3(rules.Data[idx++].ToString());
@@ -5564,7 +5564,7 @@ namespace OpenSim.Region.ScriptEngine.Common
                                 m_host.Shape.PathCurve = (byte) Extrusion.Curve1;
                                 SetPrimitiveShapeParams(face, v, hollow, twist, holesize, topshear, profilecut, taper_b, revolutions, radiusoffset, skew, 3);
                                 break;
-                        
+
                             case (int)BuiltIn_Commands_BaseClass.PRIM_TYPE_SCULPT:
                                 if (remain < 2)
                                     return;
@@ -5575,7 +5575,7 @@ namespace OpenSim.Region.ScriptEngine.Common
                                 SetPrimitiveShapeParams(map, face);
                                 break;
                         }
-                    
+
                         break;
 
                     case (int)BuiltIn_Commands_BaseClass.PRIM_TEXTURE:
@@ -5630,7 +5630,7 @@ namespace OpenSim.Region.ScriptEngine.Common
                         float intensity = (float)Convert.ToDouble(rules.Data[idx++]);
                         float radius = (float)Convert.ToDouble(rules.Data[idx++]);
                         float falloff = (float)Convert.ToDouble(rules.Data[idx++]);
-                        
+
                         SetPointLight(part, (light == 1), lightcolor, intensity, radius, falloff);
 
                         break;
@@ -5701,7 +5701,7 @@ namespace OpenSim.Region.ScriptEngine.Common
         public LSL_Types.list llGetAnimationList( string id )
         {
             m_host.AddScriptLPS(1);
-            
+
             LSL_Types.list l = new LSL_Types.list();
             ScenePresence av = World.GetScenePresence(id);
             if (av == null)
@@ -6560,7 +6560,7 @@ namespace OpenSim.Region.ScriptEngine.Common
             IConfigSource config = new IniConfigSource(Application.iniFilePath);
             if (config.Configs["LL-Functions"] == null)
                 config.AddConfig("LL-Functions");
-            
+
             if (config.Configs["LL-Functions"].GetBoolean("AllowGodFunctions", false))
             {
                 if (World.ExternalChecks.ExternalChecksCanRunConsoleCommand(m_host.OwnerID))
@@ -6829,7 +6829,7 @@ namespace OpenSim.Region.ScriptEngine.Common
             //PARCEL_MEDIA_COMMAND_LOOP_SET    float loop      Use this to get or set the parcel's media loop duration. (1.19.1 RC0 or later)
             m_host.AddScriptLPS(1);
             for (int i = 0; i < commandList.Data.Length; i++)
-            {                
+            {
                 switch ((ParcelMediaCommandEnum)commandList.Data[i])
                 {
                     case ParcelMediaCommandEnum.Play:
@@ -6839,7 +6839,7 @@ namespace OpenSim.Region.ScriptEngine.Common
                             if (!agent.IsChildAgent)
                             {
                                 agent.ControllingClient.SendParcelMediaCommand((uint)(4), ParcelMediaCommandEnum.Play, 0);
-                            }                                
+                            }
                         }
                         break;
                     case ParcelMediaCommandEnum.Stop:
@@ -6870,7 +6870,7 @@ namespace OpenSim.Region.ScriptEngine.Common
                             {
                                 //Set the new media URL only if the user is the owner of the land
                                 osSetParcelMediaURL(commandList.Data[i + 1].ToString());
-                                                                    
+
                                 List<ScenePresence> scenePresenceList = World.GetScenePresences();
                                 LandData landData = World.GetLandData(m_host.AbsolutePosition.X, m_host.AbsolutePosition.Y);
                                 //Send an update of the mediaURL to all the clients that are in the parcel
@@ -6881,8 +6881,8 @@ namespace OpenSim.Region.ScriptEngine.Common
                                         //Send parcel media update to the client
                                         agent.ControllingClient.SendParcelMediaUpdate(landData.MediaURL, landData.MediaID, landData.MediaAutoScale, "", landData.Description, 0, 0, 1);
                                     }
-                                }                    
-                                
+                                }
+
                             }
                             i++;
                         }
@@ -6892,7 +6892,7 @@ namespace OpenSim.Region.ScriptEngine.Common
                         NotImplemented("llParcelMediaCommandList parameter do not supported yet: " + Enum.Parse(mediaCommandEnum.GetType(), commandList.Data[i].ToString()).ToString());
                         break;
                 }//end switch
-                
+
             }
 
 
@@ -6935,7 +6935,7 @@ namespace OpenSim.Region.ScriptEngine.Common
                 }
             }
             return list;
-            
+
         }
 
         public LSL_Types.LSLInteger llModPow(int a, int b, int c)
@@ -6979,7 +6979,7 @@ namespace OpenSim.Region.ScriptEngine.Common
         {
             m_host.AddScriptLPS(1);
             LLUUID invItemID=InventorySelf();
-            if (invItemID == LLUUID.Zero) 
+            if (invItemID == LLUUID.Zero)
                 return new LSL_Types.Vector3();
             if (m_host.TaskInventory[invItemID].PermsGranter == LLUUID.Zero)
                return new LSL_Types.Vector3();
@@ -6989,7 +6989,7 @@ namespace OpenSim.Region.ScriptEngine.Common
                 return new LSL_Types.Vector3();
             }
             ScenePresence presence = World.GetScenePresence(m_host.OwnerID);
-            if (presence != null) 
+            if (presence != null)
             {
                 LSL_Types.Vector3 pos = new LSL_Types.Vector3(presence.CameraPosition.x,presence.CameraPosition.y,presence.CameraPosition.z);
                 return pos;
@@ -7111,8 +7111,8 @@ namespace OpenSim.Region.ScriptEngine.Common
         public void llSetCameraParams(LSL_Types.list rules)
         {
             m_host.AddScriptLPS(1);
-            
-            // our key in the object we are in 
+
+            // our key in the object we are in
             LLUUID invItemID=InventorySelf();
             if (invItemID == LLUUID.Zero) return;
 
@@ -7126,10 +7126,10 @@ namespace OpenSim.Region.ScriptEngine.Common
             if ((m_host.TaskInventory[invItemID].PermsMask & BuiltIn_Commands_BaseClass.PERMISSION_CONTROL_CAMERA) == 0) return;
 
             ScenePresence presence = World.GetScenePresence(agentID);
-            
+
             // we are not interested in child-agents
             if (presence.IsChildAgent) return;
-            
+
             SortedDictionary<int, float> parameters = new SortedDictionary<int, float>();
             object[] data = rules.Data;
             for (int i = 0; i < data.Length; ++i) {
@@ -7142,8 +7142,8 @@ namespace OpenSim.Region.ScriptEngine.Common
                 case BuiltIn_Commands_BaseClass.CAMERA_FOCUS_OFFSET:
                 case BuiltIn_Commands_BaseClass.CAMERA_POSITION:
                     LSL_Types.Vector3 v = (LSL_Types.Vector3)data[i];
-                    parameters.Add(type + 1, (float)v.x); 
-                    parameters.Add(type + 2, (float)v.y); 
+                    parameters.Add(type + 1, (float)v.x);
+                    parameters.Add(type + 2, (float)v.y);
                     parameters.Add(type + 3, (float)v.z);
                     break;
                 default:
@@ -7163,7 +7163,7 @@ namespace OpenSim.Region.ScriptEngine.Common
         {
             m_host.AddScriptLPS(1);
 
-            // our key in the object we are in 
+            // our key in the object we are in
             LLUUID invItemID=InventorySelf();
             if (invItemID == LLUUID.Zero) return;
 
@@ -7177,10 +7177,10 @@ namespace OpenSim.Region.ScriptEngine.Common
             if ((m_host.TaskInventory[invItemID].PermsMask & BuiltIn_Commands_BaseClass.PERMISSION_CONTROL_CAMERA) == 0) return;
 
             ScenePresence presence = World.GetScenePresence(agentID);
-            
+
             // we are not interested in child-agents
             if (presence.IsChildAgent) return;
-            
+
             presence.ControllingClient.SendClearFollowCamProperties(objectID);
         }
 
diff --git a/OpenSim/Region/ScriptEngine/Common/LSL_Types.cs b/OpenSim/Region/ScriptEngine/Common/LSL_Types.cs
index e98dec6..3b317ac 100644
--- a/OpenSim/Region/ScriptEngine/Common/LSL_Types.cs
+++ b/OpenSim/Region/ScriptEngine/Common/LSL_Types.cs
@@ -703,7 +703,7 @@ namespace OpenSim.Region.ScriptEngine.Common
                         // Otherwise, if we have strings, compare them alphabetically.
                         string str1 = new string(space1);
                         string str2 = new string(space2);
-                        
+
                         int result;
 
                         if (char.IsDigit(space1[0]) && char.IsDigit(space2[0]))
@@ -1427,22 +1427,22 @@ namespace OpenSim.Region.ScriptEngine.Common
                 bool ret = i1.value != i2.value;
                 return ret;
             }
-            
+
             static public LSLInteger operator +(LSLInteger i1, int i2)
             {
                 return new LSLInteger(i1.value + i2);
             }
-            
+
             static public LSLInteger operator -(LSLInteger i1, int i2)
             {
                 return new LSLInteger(i1.value - i2);
             }
-            
+
             static public LSLInteger operator *(LSLInteger i1, int i2)
             {
                 return new LSLInteger(i1.value * i2);
             }
-            
+
             static public LSLInteger operator /(LSLInteger i1, int i2)
             {
                 return new LSLInteger(i1.value / i2);
@@ -1452,22 +1452,22 @@ namespace OpenSim.Region.ScriptEngine.Common
             {
                 return new LSLFloat((double)i1.value + f);
             }
-            
+
             static public LSLFloat operator -(LSLInteger i1, double f)
             {
                 return new LSLFloat((double)i1.value - f);
             }
-            
+
             static public LSLFloat operator *(LSLInteger i1, double f)
             {
                 return new LSLFloat((double)i1.value * f);
             }
-            
+
             static public LSLFloat operator /(LSLInteger i1, double f)
             {
                 return new LSLFloat((double)i1.value / f);
             }
-            
+
             static public LSLInteger operator -(LSLInteger i)
             {
                 return new LSLInteger(-i.value);
@@ -1623,17 +1623,17 @@ namespace OpenSim.Region.ScriptEngine.Common
                 f.value--;
                 return f;
             }
-            
+
             static public LSLFloat operator +(LSLFloat f, int i)
             {
                 return new LSLFloat(f.value + (double)i);
             }
-            
+
             static public LSLFloat operator -(LSLFloat f, int i)
             {
                 return new LSLFloat(f.value - (double)i);
             }
-            
+
             static public LSLFloat operator *(LSLFloat f, int i)
             {
                 return new LSLFloat(f.value * (double)i);
diff --git a/OpenSim/Region/ScriptEngine/Common/ScriptEngineBase/AsyncCommandPlugins/Dataserver.cs b/OpenSim/Region/ScriptEngine/Common/ScriptEngineBase/AsyncCommandPlugins/Dataserver.cs
index 5f86c9c..77cc7ea 100644
--- a/OpenSim/Region/ScriptEngine/Common/ScriptEngineBase/AsyncCommandPlugins/Dataserver.cs
+++ b/OpenSim/Region/ScriptEngine/Common/ScriptEngineBase/AsyncCommandPlugins/Dataserver.cs
@@ -88,7 +88,7 @@ namespace OpenSim.Region.ScriptEngine.Common.ScriptEngineBase.AsyncCommandPlugin
             {
                 if (!DataserverRequests.ContainsKey(identifier))
                     return;
-                
+
                 ds=DataserverRequests[identifier];
                 DataserverRequests.Remove(identifier);
             }
diff --git a/OpenSim/Region/ScriptEngine/Common/ScriptEngineBase/EventQueueManager.cs b/OpenSim/Region/ScriptEngine/Common/ScriptEngineBase/EventQueueManager.cs
index 79c1dde..5c57874 100644
--- a/OpenSim/Region/ScriptEngine/Common/ScriptEngineBase/EventQueueManager.cs
+++ b/OpenSim/Region/ScriptEngine/Common/ScriptEngineBase/EventQueueManager.cs
@@ -126,7 +126,7 @@ namespace OpenSim.Region.ScriptEngine.Common.ScriptEngineBase
         /// Queue containing events waiting to be executed
         /// </summary>
         public Queue<QueueItemStruct> eventQueue = new Queue<QueueItemStruct>();
-        
+
         #region " Queue structures "
         /// <summary>
         /// Queue item structure
@@ -193,7 +193,7 @@ namespace OpenSim.Region.ScriptEngine.Common.ScriptEngineBase
         }
 
         #endregion
-        
+
         #region " Shutdown all threads "
         ~EventQueueManager()
         {
@@ -408,10 +408,10 @@ namespace OpenSim.Region.ScriptEngine.Common.ScriptEngineBase
 
                             // Set flag if script should be removed or not
                             EventQueueThread.KillCurrentScript = KillScriptOnMaxFunctionExecutionTime;
-                            
+
                             // Abort this thread
                             AbortThreadClass(EventQueueThread);
-                            
+
                             // We do not need to start another, MaintenenceThread will do that for us
                             //StartNewThreadClass();
                         }
diff --git a/OpenSim/Region/ScriptEngine/Common/ScriptEngineBase/EventQueueThreadClass.cs b/OpenSim/Region/ScriptEngine/Common/ScriptEngineBase/EventQueueThreadClass.cs
index 255ab99..4376e00 100644
--- a/OpenSim/Region/ScriptEngine/Common/ScriptEngineBase/EventQueueThreadClass.cs
+++ b/OpenSim/Region/ScriptEngine/Common/ScriptEngineBase/EventQueueThreadClass.cs
@@ -44,7 +44,7 @@ namespace OpenSim.Region.ScriptEngine.Common.ScriptEngineBase
     public class EventQueueThreadClass : iScriptEngineFunctionModule
     {
         // private static readonly ILog m_log = LogManager.GetLogger(MethodBase.GetCurrentMethod().DeclaringType);
-        
+
         /// <summary>
         /// How many ms to sleep if queue is empty
         /// </summary>
diff --git a/OpenSim/Region/ScriptEngine/Common/ScriptServerInterfaces.cs b/OpenSim/Region/ScriptEngine/Common/ScriptServerInterfaces.cs
index f04ac01..9a465f6 100644
--- a/OpenSim/Region/ScriptEngine/Common/ScriptServerInterfaces.cs
+++ b/OpenSim/Region/ScriptEngine/Common/ScriptServerInterfaces.cs
@@ -73,7 +73,7 @@ namespace OpenSim.Region.ScriptEngine.Common
             void remote_data(uint localID, LLUUID itemID);
             void http_response(uint localID, LLUUID itemID);
         }
-        
+
         public interface ServerRemotingObject
         {
             RemoteEvents Events();