aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/OpenSim/Region/Physics/ChOdePlugin/ODEDynamics.c_comments
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--OpenSim/Region/Physics/ChOdePlugin/ODEDynamics.c_comments630
1 files changed, 0 insertions, 630 deletions
diff --git a/OpenSim/Region/Physics/ChOdePlugin/ODEDynamics.c_comments b/OpenSim/Region/Physics/ChOdePlugin/ODEDynamics.c_comments
deleted file mode 100644
index 1060aa6..0000000
--- a/OpenSim/Region/Physics/ChOdePlugin/ODEDynamics.c_comments
+++ /dev/null
@@ -1,630 +0,0 @@
1/*
2 * Revised August 26 2009 by Kitto Flora. ODEDynamics.cs replaces
3 * ODEVehicleSettings.cs. It and ODEPrim.cs are re-organised:
4 * ODEPrim.cs contains methods dealing with Prim editing, Prim
5 * characteristics and Kinetic motion.
6 * ODEDynamics.cs contains methods dealing with Prim Physical motion
7 * (dynamics) and the associated settings. Old Linear and angular
8 * motors for dynamic motion have been replace with MoveLinear()
9 * and MoveAngular(); 'Physical' is used only to switch ODE dynamic
10 * simualtion on/off; VEHICAL_TYPE_NONE/VEHICAL_TYPE_<other> is to
11 * switch between 'VEHICLE' parameter use and general dynamics
12 * settings use.
13 *
14 * Copyright (c) Contributors, http://opensimulator.org/
15 * See CONTRIBUTORS.TXT for a full list of copyright holders.
16 *
17 * Redistribution and use in source and binary forms, with or without
18 * modification, are permitted provided that the following conditions are met:
19 * * Redistributions of source code must retain the above copyright
20 * notice, this list of conditions and the following disclaimer.
21 * * Redistributions in binary form must reproduce the above copyright
22 * notice, this list of conditions and the following disclaimer in the
23 * documentation and/or other materials provided with the distribution.
24 * * Neither the name of the OpenSimulator Project nor the
25 * names of its contributors may be used to endorse or promote products
26 * derived from this software without specific prior written permission.
27 *
28 * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
29 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
30 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
31 * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
32 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
33 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
34 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
35 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
36 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
37 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
38 */
39
40using System;
41using System.Collections.Generic;
42using System.Reflection;
43using System.Runtime.InteropServices;
44using log4net;
45using OpenMetaverse;
46using Ode.NET;
47using OpenSim.Framework;
48using OpenSim.Region.Physics.Manager;
49
50namespace OpenSim.Region.Physics.OdePlugin
51{
52 public class ODEDynamics
53 {
54 public Vehicle Type
55 {
56 get { return m_type; }
57 }
58
59 public IntPtr Body
60 {
61 get { return m_body; }
62 }
63
64 private int frcount = 0; // Used to limit dynamics debug output to
65 // every 100th frame
66
67 // private OdeScene m_parentScene = null;
68 private IntPtr m_body = IntPtr.Zero;
69 private IntPtr m_jointGroup = IntPtr.Zero;
70 private IntPtr m_aMotor = IntPtr.Zero;
71
72
73 // Vehicle properties
74 private Vehicle m_type = Vehicle.TYPE_NONE; // If a 'VEHICLE', and what kind
75 // private Quaternion m_referenceFrame = Quaternion.Identity; // Axis modifier
76 private VehicleFlag m_flags = (VehicleFlag) 0; // Boolean settings:
77 // HOVER_TERRAIN_ONLY
78 // HOVER_GLOBAL_HEIGHT
79 // NO_DEFLECTION_UP
80 // HOVER_WATER_ONLY
81 // HOVER_UP_ONLY
82 // LIMIT_MOTOR_UP
83 // LIMIT_ROLL_ONLY
84
85 // Linear properties
86 private Vector3 m_linearMotorDirection = Vector3.Zero; // velocity requested by LSL, decayed by time
87 private Vector3 m_linearMotorDirectionLASTSET = Vector3.Zero; // velocity requested by LSL
88 private Vector3 m_dir = Vector3.Zero; // velocity applied to body
89 private Vector3 m_linearFrictionTimescale = Vector3.Zero;
90 private float m_linearMotorDecayTimescale = 0;
91 private float m_linearMotorTimescale = 0;
92 private Vector3 m_lastLinearVelocityVector = Vector3.Zero;
93 // private bool m_LinearMotorSetLastFrame = false;
94 // private Vector3 m_linearMotorOffset = Vector3.Zero;
95
96 //Angular properties
97 private Vector3 m_angularMotorDirection = Vector3.Zero;
98 private Vector3 m_angularMotorDirectionLASTSET = Vector3.Zero;
99 private Vector3 m_angularFrictionTimescale = Vector3.Zero;
100 private float m_angularMotorDecayTimescale = 0;
101 private float m_angularMotorTimescale = 0;
102 private Vector3 m_lastAngularVelocityVector = Vector3.Zero;
103
104 //Deflection properties
105 // private float m_angularDeflectionEfficiency = 0;
106 // private float m_angularDeflectionTimescale = 0;
107 // private float m_linearDeflectionEfficiency = 0;
108 // private float m_linearDeflectionTimescale = 0;
109
110 //Banking properties
111 // private float m_bankingEfficiency = 0;
112 // private float m_bankingMix = 0;
113 // private float m_bankingTimescale = 0;
114
115 //Hover and Buoyancy properties
116 private float m_VhoverHeight = 0f;
117 private float m_VhoverEfficiency = 0f;
118 private float m_VhoverTimescale = 0f;
119 private float m_VhoverTargetHeight = -1.0f; // if <0 then no hover, else its the current target height
120 private float m_VehicleBuoyancy = 0f; //KF: m_VehicleBuoyancy is set by VEHICLE_BUOYANCY for a vehicle.
121 // Modifies gravity. Slider between -1 (double-gravity) and 1 (full anti-gravity)
122 // KF: So far I have found no good method to combine a script-requested .Z velocity and gravity.
123 // Therefore only m_VehicleBuoyancy=1 (0g) will use the script-requested .Z velocity.
124
125 //Attractor properties
126 private float m_verticalAttractionEfficiency = 0;
127 private float m_verticalAttractionTimescale = 0;
128
129
130
131
132
133 internal void ProcessFloatVehicleParam(Vehicle pParam, float pValue)
134 {
135 switch (pParam)
136 {
137 case Vehicle.ANGULAR_DEFLECTION_EFFICIENCY:
138 if (pValue < 0.01f) pValue = 0.01f;
139 // m_angularDeflectionEfficiency = pValue;
140 break;
141 case Vehicle.ANGULAR_DEFLECTION_TIMESCALE:
142 if (pValue < 0.01f) pValue = 0.01f;
143 // m_angularDeflectionTimescale = pValue;
144 break;
145 case Vehicle.ANGULAR_MOTOR_DECAY_TIMESCALE:
146 if (pValue < 0.01f) pValue = 0.01f;
147 m_angularMotorDecayTimescale = pValue;
148 break;
149 case Vehicle.ANGULAR_MOTOR_TIMESCALE:
150 if (pValue < 0.01f) pValue = 0.01f;
151 m_angularMotorTimescale = pValue;
152 break;
153 case Vehicle.BANKING_EFFICIENCY:
154 if (pValue < 0.01f) pValue = 0.01f;
155 // m_bankingEfficiency = pValue;
156 break;
157 case Vehicle.BANKING_MIX:
158 if (pValue < 0.01f) pValue = 0.01f;
159 // m_bankingMix = pValue;
160 break;
161 case Vehicle.BANKING_TIMESCALE:
162 if (pValue < 0.01f) pValue = 0.01f;
163 // m_bankingTimescale = pValue;
164 break;
165 case Vehicle.BUOYANCY:
166 if (pValue < -1f) pValue = -1f;
167 if (pValue > 1f) pValue = 1f;
168 m_VehicleBuoyancy = pValue;
169 break;
170 case Vehicle.HOVER_EFFICIENCY:
171 if (pValue < 0f) pValue = 0f;
172 if (pValue > 1f) pValue = 1f;
173 m_VhoverEfficiency = pValue;
174 break;
175 case Vehicle.HOVER_HEIGHT:
176 m_VhoverHeight = pValue;
177 break;
178 case Vehicle.HOVER_TIMESCALE:
179 if (pValue < 0.01f) pValue = 0.01f;
180 m_VhoverTimescale = pValue;
181 break;
182 case Vehicle.LINEAR_DEFLECTION_EFFICIENCY:
183 if (pValue < 0.01f) pValue = 0.01f;
184 // m_linearDeflectionEfficiency = pValue;
185 break;
186 case Vehicle.LINEAR_DEFLECTION_TIMESCALE:
187 if (pValue < 0.01f) pValue = 0.01f;
188 // m_linearDeflectionTimescale = pValue;
189 break;
190 case Vehicle.LINEAR_MOTOR_DECAY_TIMESCALE:
191 if (pValue < 0.01f) pValue = 0.01f;
192 m_linearMotorDecayTimescale = pValue;
193 break;
194 case Vehicle.LINEAR_MOTOR_TIMESCALE:
195 if (pValue < 0.01f) pValue = 0.01f;
196 m_linearMotorTimescale = pValue;
197 break;
198 case Vehicle.VERTICAL_ATTRACTION_EFFICIENCY:
199 if (pValue < 0.0f) pValue = 0.0f;
200 if (pValue > 1.0f) pValue = 1.0f;
201 m_verticalAttractionEfficiency = pValue;
202 break;
203 case Vehicle.VERTICAL_ATTRACTION_TIMESCALE:
204 if (pValue < 0.01f) pValue = 0.01f;
205 m_verticalAttractionTimescale = pValue;
206 break;
207
208 // These are vector properties but the engine lets you use a single float value to
209 // set all of the components to the same value
210 case Vehicle.ANGULAR_FRICTION_TIMESCALE:
211 m_angularFrictionTimescale = new Vector3(pValue, pValue, pValue);
212 break;
213 case Vehicle.ANGULAR_MOTOR_DIRECTION:
214 m_angularMotorDirection = new Vector3(pValue, pValue, pValue);
215 m_angularMotorDirectionLASTSET = new Vector3(pValue, pValue, pValue);
216 break;
217 case Vehicle.LINEAR_FRICTION_TIMESCALE:
218 m_linearFrictionTimescale = new Vector3(pValue, pValue, pValue);
219 break;
220 case Vehicle.LINEAR_MOTOR_DIRECTION:
221 m_linearMotorDirection = new Vector3(pValue, pValue, pValue);
222 m_linearMotorDirectionLASTSET = new Vector3(pValue, pValue, pValue);
223 break;
224 case Vehicle.LINEAR_MOTOR_OFFSET:
225 // m_linearMotorOffset = new Vector3(pValue, pValue, pValue);
226 break;
227
228 }
229
230 }//end ProcessFloatVehicleParam
231
232 internal void ProcessVectorVehicleParam(Vehicle pParam, PhysicsVector pValue)
233 {
234 switch (pParam)
235 {
236 case Vehicle.ANGULAR_FRICTION_TIMESCALE:
237 m_angularFrictionTimescale = new Vector3(pValue.X, pValue.Y, pValue.Z);
238 break;
239 case Vehicle.ANGULAR_MOTOR_DIRECTION:
240 m_angularMotorDirection = new Vector3(pValue.X, pValue.Y, pValue.Z);
241 m_angularMotorDirectionLASTSET = new Vector3(pValue.X, pValue.Y, pValue.Z);
242 break;
243 case Vehicle.LINEAR_FRICTION_TIMESCALE:
244 m_linearFrictionTimescale = new Vector3(pValue.X, pValue.Y, pValue.Z);
245 break;
246 case Vehicle.LINEAR_MOTOR_DIRECTION:
247 m_linearMotorDirection = new Vector3(pValue.X, pValue.Y, pValue.Z);
248 m_linearMotorDirectionLASTSET = new Vector3(pValue.X, pValue.Y, pValue.Z);
249 break;
250 case Vehicle.LINEAR_MOTOR_OFFSET:
251 // m_linearMotorOffset = new Vector3(pValue.X, pValue.Y, pValue.Z);
252 break;
253 }
254
255 }//end ProcessVectorVehicleParam
256
257 internal void ProcessRotationVehicleParam(Vehicle pParam, Quaternion pValue)
258 {
259 switch (pParam)
260 {
261 case Vehicle.REFERENCE_FRAME:
262 // m_referenceFrame = pValue;
263 break;
264 }
265
266 }//end ProcessRotationVehicleParam
267
268 internal void ProcessTypeChange(Vehicle pType)
269 {
270Console.WriteLine("ProcessTypeChange to " + pType);
271
272 // Set Defaults For Type
273 m_type = pType;
274 switch (pType)
275 {
276 case Vehicle.TYPE_SLED:
277 m_linearFrictionTimescale = new Vector3(30, 1, 1000);
278 m_angularFrictionTimescale = new Vector3(1000, 1000, 1000);
279 m_linearMotorDirection = Vector3.Zero;
280 m_linearMotorTimescale = 1000;
281 m_linearMotorDecayTimescale = 120;
282 m_angularMotorDirection = Vector3.Zero;
283 m_angularMotorTimescale = 1000;
284 m_angularMotorDecayTimescale = 120;
285 m_VhoverHeight = 0;
286 m_VhoverEfficiency = 1;
287 m_VhoverTimescale = 10;
288 m_VehicleBuoyancy = 0;
289 // m_linearDeflectionEfficiency = 1;
290 // m_linearDeflectionTimescale = 1;
291 // m_angularDeflectionEfficiency = 1;
292 // m_angularDeflectionTimescale = 1000;
293 // m_bankingEfficiency = 0;
294 // m_bankingMix = 1;
295 // m_bankingTimescale = 10;
296 // m_referenceFrame = Quaternion.Identity;
297 m_flags &=
298 ~(VehicleFlag.HOVER_WATER_ONLY | VehicleFlag.HOVER_TERRAIN_ONLY |
299 VehicleFlag.HOVER_GLOBAL_HEIGHT | VehicleFlag.HOVER_UP_ONLY);
300 m_flags |= (VehicleFlag.NO_DEFLECTION_UP | VehicleFlag.LIMIT_ROLL_ONLY | VehicleFlag.LIMIT_MOTOR_UP);
301 break;
302 case Vehicle.TYPE_CAR:
303 m_linearFrictionTimescale = new Vector3(100, 2, 1000);
304 m_angularFrictionTimescale = new Vector3(1000, 1000, 1000);
305 m_linearMotorDirection = Vector3.Zero;
306 m_linearMotorTimescale = 1;
307 m_linearMotorDecayTimescale = 60;
308 m_angularMotorDirection = Vector3.Zero;
309 m_angularMotorTimescale = 1;
310 m_angularMotorDecayTimescale = 0.8f;
311 m_VhoverHeight = 0;
312 m_VhoverEfficiency = 0;
313 m_VhoverTimescale = 1000;
314 m_VehicleBuoyancy = 0;
315 // // m_linearDeflectionEfficiency = 1;
316 // // m_linearDeflectionTimescale = 2;
317 // // m_angularDeflectionEfficiency = 0;
318 // m_angularDeflectionTimescale = 10;
319 m_verticalAttractionEfficiency = 1;
320 m_verticalAttractionTimescale = 10;
321 // m_bankingEfficiency = -0.2f;
322 // m_bankingMix = 1;
323 // m_bankingTimescale = 1;
324 // m_referenceFrame = Quaternion.Identity;
325 m_flags &= ~(VehicleFlag.HOVER_WATER_ONLY | VehicleFlag.HOVER_TERRAIN_ONLY | VehicleFlag.HOVER_GLOBAL_HEIGHT);
326 m_flags |= (VehicleFlag.NO_DEFLECTION_UP | VehicleFlag.LIMIT_ROLL_ONLY | VehicleFlag.HOVER_UP_ONLY |
327 VehicleFlag.LIMIT_MOTOR_UP);
328 break;
329 case Vehicle.TYPE_BOAT:
330 m_linearFrictionTimescale = new Vector3(10, 3, 2);
331 m_angularFrictionTimescale = new Vector3(10,10,10);
332 m_linearMotorDirection = Vector3.Zero;
333 m_linearMotorTimescale = 5;
334 m_linearMotorDecayTimescale = 60;
335 m_angularMotorDirection = Vector3.Zero;
336 m_angularMotorTimescale = 4;
337 m_angularMotorDecayTimescale = 4;
338 m_VhoverHeight = 0;
339 m_VhoverEfficiency = 0.5f;
340 m_VhoverTimescale = 2;
341 m_VehicleBuoyancy = 1;
342 // m_linearDeflectionEfficiency = 0.5f;
343 // m_linearDeflectionTimescale = 3;
344 // m_angularDeflectionEfficiency = 0.5f;
345 // m_angularDeflectionTimescale = 5;
346 m_verticalAttractionEfficiency = 0.5f;
347 m_verticalAttractionTimescale = 5;
348 // m_bankingEfficiency = -0.3f;
349 // m_bankingMix = 0.8f;
350 // m_bankingTimescale = 1;
351 // m_referenceFrame = Quaternion.Identity;
352 m_flags &= ~(VehicleFlag.HOVER_TERRAIN_ONLY | VehicleFlag.LIMIT_ROLL_ONLY |
353 VehicleFlag.HOVER_GLOBAL_HEIGHT | VehicleFlag.HOVER_UP_ONLY);
354 m_flags |= (VehicleFlag.NO_DEFLECTION_UP | VehicleFlag.HOVER_WATER_ONLY |
355 VehicleFlag.LIMIT_MOTOR_UP);
356 break;
357 case Vehicle.TYPE_AIRPLANE:
358 m_linearFrictionTimescale = new Vector3(200, 10, 5);
359 m_angularFrictionTimescale = new Vector3(20, 20, 20);
360 m_linearMotorDirection = Vector3.Zero;
361 m_linearMotorTimescale = 2;
362 m_linearMotorDecayTimescale = 60;
363 m_angularMotorDirection = Vector3.Zero;
364 m_angularMotorTimescale = 4;
365 m_angularMotorDecayTimescale = 4;
366 m_VhoverHeight = 0;
367 m_VhoverEfficiency = 0.5f;
368 m_VhoverTimescale = 1000;
369 m_VehicleBuoyancy = 0;
370 // m_linearDeflectionEfficiency = 0.5f;
371 // m_linearDeflectionTimescale = 3;
372 // m_angularDeflectionEfficiency = 1;
373 // m_angularDeflectionTimescale = 2;
374 m_verticalAttractionEfficiency = 0.9f;
375 m_verticalAttractionTimescale = 2;
376 // m_bankingEfficiency = 1;
377 // m_bankingMix = 0.7f;
378 // m_bankingTimescale = 2;
379 // m_referenceFrame = Quaternion.Identity;
380 m_flags &= ~(VehicleFlag.NO_DEFLECTION_UP | VehicleFlag.HOVER_WATER_ONLY | VehicleFlag.HOVER_TERRAIN_ONLY |
381 VehicleFlag.HOVER_GLOBAL_HEIGHT | VehicleFlag.HOVER_UP_ONLY | VehicleFlag.LIMIT_MOTOR_UP);
382 m_flags |= (VehicleFlag.LIMIT_ROLL_ONLY);
383 break;
384 case Vehicle.TYPE_BALLOON:
385 m_linearFrictionTimescale = new Vector3(5, 5, 5);
386 m_angularFrictionTimescale = new Vector3(10, 10, 10);
387 m_linearMotorDirection = Vector3.Zero;
388 m_linearMotorTimescale = 5;
389 m_linearMotorDecayTimescale = 60;
390 m_angularMotorDirection = Vector3.Zero;
391 m_angularMotorTimescale = 6;
392 m_angularMotorDecayTimescale = 10;
393 m_VhoverHeight = 5;
394 m_VhoverEfficiency = 0.8f;
395 m_VhoverTimescale = 10;
396 m_VehicleBuoyancy = 1;
397 // m_linearDeflectionEfficiency = 0;
398 // m_linearDeflectionTimescale = 5;
399 // m_angularDeflectionEfficiency = 0;
400 // m_angularDeflectionTimescale = 5;
401 m_verticalAttractionEfficiency = 1;
402 m_verticalAttractionTimescale = 1000;
403 // m_bankingEfficiency = 0;
404 // m_bankingMix = 0.7f;
405 // m_bankingTimescale = 5;
406 // m_referenceFrame = Quaternion.Identity;
407 m_flags &= ~(VehicleFlag.NO_DEFLECTION_UP | VehicleFlag.HOVER_WATER_ONLY | VehicleFlag.HOVER_TERRAIN_ONLY |
408 VehicleFlag.HOVER_UP_ONLY | VehicleFlag.LIMIT_MOTOR_UP);
409 m_flags |= (VehicleFlag.LIMIT_ROLL_ONLY | VehicleFlag.HOVER_GLOBAL_HEIGHT);
410 break;
411
412 }
413 }//end SetDefaultsForType
414
415 internal void Enable(IntPtr pBody, OdeScene pParentScene)
416 {
417//Console.WriteLine("Enable m_type=" + m_type + " m_VehicleBuoyancy=" + m_VehicleBuoyancy);
418 if (m_type == Vehicle.TYPE_NONE)
419 return;
420
421 m_body = pBody;
422 //KF: This used to set up the linear and angular joints
423 }
424
425 internal void Step(float pTimestep, OdeScene pParentScene)
426 {
427 if (m_body == IntPtr.Zero || m_type == Vehicle.TYPE_NONE)
428 return;
429 frcount++; // used to limit debug comment output
430 if (frcount > 100)
431 frcount = 0;
432
433 MoveLinear(pTimestep, pParentScene);
434 MoveAngular(pTimestep);
435 }// end Step
436
437 private void MoveLinear(float pTimestep, OdeScene _pParentScene)
438 {
439 if (!m_linearMotorDirection.ApproxEquals(Vector3.Zero, 0.01f)) // requested m_linearMotorDirection is significant
440 {
441 if(!d.BodyIsEnabled (Body)) d.BodyEnable (Body);
442
443 // add drive to body
444 Vector3 addAmount = m_linearMotorDirection/(m_linearMotorTimescale/pTimestep);
445 m_lastLinearVelocityVector += (addAmount*10); // lastLinearVelocityVector is the current body velocity vector?
446
447 // This will work temporarily, but we really need to compare speed on an axis
448 // KF: Limit body velocity to applied velocity?
449 if (Math.Abs(m_lastLinearVelocityVector.X) > Math.Abs(m_linearMotorDirectionLASTSET.X))
450 m_lastLinearVelocityVector.X = m_linearMotorDirectionLASTSET.X;
451 if (Math.Abs(m_lastLinearVelocityVector.Y) > Math.Abs(m_linearMotorDirectionLASTSET.Y))
452 m_lastLinearVelocityVector.Y = m_linearMotorDirectionLASTSET.Y;
453 if (Math.Abs(m_lastLinearVelocityVector.Z) > Math.Abs(m_linearMotorDirectionLASTSET.Z))
454 m_lastLinearVelocityVector.Z = m_linearMotorDirectionLASTSET.Z;
455
456 // decay applied velocity
457 Vector3 decayfraction = ((Vector3.One/(m_linearMotorDecayTimescale/pTimestep)));
458 //Console.WriteLine("decay: " + decayfraction);
459 m_linearMotorDirection -= m_linearMotorDirection * decayfraction;
460 //Console.WriteLine("actual: " + m_linearMotorDirection);
461 }
462 else
463 { // requested is not significant
464 // if what remains of applied is small, zero it.
465 if (m_lastLinearVelocityVector.ApproxEquals(Vector3.Zero, 0.01f))
466 m_lastLinearVelocityVector = Vector3.Zero;
467 }
468
469
470 // convert requested object velocity to world-referenced vector
471 m_dir = m_lastLinearVelocityVector;
472 d.Quaternion rot = d.BodyGetQuaternion(Body);
473 Quaternion rotq = new Quaternion(rot.X, rot.Y, rot.Z, rot.W); // rotq = rotation of object
474 m_dir *= rotq; // apply obj rotation to velocity vector
475
476 // add Gravity andBuoyancy
477 // KF: So far I have found no good method to combine a script-requested
478 // .Z velocity and gravity. Therefore only 0g will used script-requested
479 // .Z velocity. >0g (m_VehicleBuoyancy < 1) will used modified gravity only.
480 Vector3 grav = Vector3.Zero;
481 if(m_VehicleBuoyancy < 1.0f)
482 {
483 // There is some gravity, make a gravity force vector
484 // that is applied after object velocity.
485 d.Mass objMass;
486 d.BodyGetMass(Body, out objMass);
487 // m_VehicleBuoyancy: -1=2g; 0=1g; 1=0g;
488 grav.Z = _pParentScene.gravityz * objMass.mass * (1f - m_VehicleBuoyancy);
489 // Preserve the current Z velocity
490 d.Vector3 vel_now = d.BodyGetLinearVel(Body);
491 m_dir.Z = vel_now.Z; // Preserve the accumulated falling velocity
492 } // else its 1.0, no gravity.
493
494 // Check if hovering
495 if( (m_flags & (VehicleFlag.HOVER_WATER_ONLY | VehicleFlag.HOVER_TERRAIN_ONLY | VehicleFlag.HOVER_GLOBAL_HEIGHT)) != 0)
496 {
497 // We should hover, get the target height
498 d.Vector3 pos = d.BodyGetPosition(Body);
499 if((m_flags & VehicleFlag.HOVER_WATER_ONLY) == VehicleFlag.HOVER_WATER_ONLY)
500 {
501 m_VhoverTargetHeight = _pParentScene.GetWaterLevel() + m_VhoverHeight;
502 }
503 else if((m_flags & VehicleFlag.HOVER_TERRAIN_ONLY) == VehicleFlag.HOVER_TERRAIN_ONLY)
504 {
505 m_VhoverTargetHeight = _pParentScene.GetTerrainHeightAtXY(pos.X, pos.Y) + m_VhoverHeight;
506 }
507 else if((m_flags & VehicleFlag.HOVER_GLOBAL_HEIGHT) == VehicleFlag.HOVER_GLOBAL_HEIGHT)
508 {
509 m_VhoverTargetHeight = m_VhoverHeight;
510 }
511
512 if((m_flags & VehicleFlag.HOVER_UP_ONLY) == VehicleFlag.HOVER_UP_ONLY)
513 {
514 // If body is aready heigher, use its height as target height
515 if(pos.Z > m_VhoverTargetHeight) m_VhoverTargetHeight = pos.Z;
516 }
517
518// m_VhoverEfficiency = 0f; // 0=boucy, 1=Crit.damped
519// m_VhoverTimescale = 0f; // time to acheive height
520// pTimestep is time since last frame,in secs
521 float herr0 = pos.Z - m_VhoverTargetHeight;
522//if(frcount == 0) Console.WriteLine("herr0=" + herr0);
523 // Replace Vertical speed with correction figure if significant
524 if(Math.Abs(herr0) > 0.01f )
525 {
526 d.Mass objMass;
527 d.BodyGetMass(Body, out objMass);
528 m_dir.Z = - ( (herr0 * pTimestep * 50.0f) / m_VhoverTimescale);
529 // m_VhoverEfficiency is not yet implemented
530 }
531 else
532 {
533 m_dir.Z = 0f;
534 }
535 }
536
537 // Apply velocity
538 d.BodySetLinearVel(Body, m_dir.X, m_dir.Y, m_dir.Z);
539//if(frcount == 0) Console.WriteLine("Move " + Body + ":"+ m_dir.X + " " + m_dir.Y + " " + m_dir.Z);
540 // apply gravity force
541 d.BodyAddForce(Body, grav.X, grav.Y, grav.Z);
542//if(frcount == 0) Console.WriteLine("Force " + Body + ":" + grav.X + " " + grav.Y + " " + grav.Z);
543
544
545 // apply friction
546 Vector3 decayamount = Vector3.One / (m_linearFrictionTimescale / pTimestep);
547 m_lastLinearVelocityVector -= m_lastLinearVelocityVector * decayamount;
548 } // end MoveLinear()
549
550 private void MoveAngular(float pTimestep)
551 {
552
553 // m_angularMotorDirection is the latest value from the script, and is decayed here
554 // m_angularMotorDirectionLASTSET is the latest value from the script
555 // m_lastAngularVelocityVector is what is being applied to the Body, varied up and down here
556
557 if (!m_angularMotorDirection.ApproxEquals(Vector3.Zero, 0.01f))
558 {
559 if(!d.BodyIsEnabled (Body)) d.BodyEnable (Body);
560 // ramp up to new value
561 Vector3 addAmount = m_angularMotorDirection / (m_angularMotorTimescale / pTimestep);
562 m_lastAngularVelocityVector += (addAmount * 10f);
563//if(frcount == 0) Console.WriteLine("add: " + addAmount);
564
565 // limit applied value to what was set by script
566 // This will work temporarily, but we really need to compare speed on an axis
567 if (Math.Abs(m_lastAngularVelocityVector.X) > Math.Abs(m_angularMotorDirectionLASTSET.X))
568 m_lastAngularVelocityVector.X = m_angularMotorDirectionLASTSET.X;
569 if (Math.Abs(m_lastAngularVelocityVector.Y) > Math.Abs(m_angularMotorDirectionLASTSET.Y))
570 m_lastAngularVelocityVector.Y = m_angularMotorDirectionLASTSET.Y;
571 if (Math.Abs(m_lastAngularVelocityVector.Z) > Math.Abs(m_angularMotorDirectionLASTSET.Z))
572 m_lastAngularVelocityVector.Z = m_angularMotorDirectionLASTSET.Z;
573
574 // decay the requested value
575 Vector3 decayfraction = ((Vector3.One / (m_angularMotorDecayTimescale / pTimestep)));
576 //Console.WriteLine("decay: " + decayfraction);
577 m_angularMotorDirection -= m_angularMotorDirection * decayfraction;
578 //Console.WriteLine("actual: " + m_linearMotorDirection);
579 }
580 // KF: m_lastAngularVelocityVector is rotational speed in rad/sec ?
581
582 // Vertical attractor section
583
584// d.Mass objMass;
585// d.BodyGetMass(Body, out objMass);
586// float servo = 100f * objMass.mass * m_verticalAttractionEfficiency / (m_verticalAttractionTimescale * pTimestep);
587 float servo = 0.1f * m_verticalAttractionEfficiency / (m_verticalAttractionTimescale * pTimestep);
588 // get present body rotation
589 d.Quaternion rot = d.BodyGetQuaternion(Body);
590 Quaternion rotq = new Quaternion(rot.X, rot.Y, rot.Z, rot.W);
591 // make a vector pointing up
592 Vector3 verterr = Vector3.Zero;
593 verterr.Z = 1.0f;
594 // rotate it to Body Angle
595 verterr = verterr * rotq;
596 // verterr.X and .Y are the World error ammounts. They are 0 when there is no error (Vehicle Body is 'vertical'), and .Z will be 1.
597 // As the body leans to its side |.X| will increase to 1 and .Z fall to 0. As body inverts |.X| will fall and .Z will go
598 // negative. Similar for tilt and |.Y|. .X and .Y must be modulated to prevent a stable inverted body.
599 if (verterr.Z < 0.0f)
600 {
601 verterr.X = 2.0f - verterr.X;
602 verterr.Y = 2.0f - verterr.Y;
603 }
604 // Error is 0 (no error) to +/- 2 (max error)
605 // scale it by servo
606 verterr = verterr * servo;
607
608 // rotate to object frame
609 // verterr = verterr * rotq;
610
611 // As the body rotates around the X axis, then verterr.Y increases; Rotated around Y then .X increases, so
612 // Change Body angular velocity X based on Y, and Y based on X. Z is not changed.
613 m_lastAngularVelocityVector.X += verterr.Y;
614 m_lastAngularVelocityVector.Y -= verterr.X;
615/*
616if(frcount == 0)
617 {
618// Console.WriteLine("AngleMotor " + m_lastAngularVelocityVector);
619 Console.WriteLine(String.Format("VA Body:{0} servo:{1} err:<{2},{3},{4}> VAE:{5}",
620 Body, servo, verterr.X, verterr.Y, verterr.Z, m_verticalAttractionEfficiency));
621 }
622 */
623 d.BodySetAngularVel (Body, m_lastAngularVelocityVector.X, m_lastAngularVelocityVector.Y, m_lastAngularVelocityVector.Z);
624 // apply friction
625 Vector3 decayamount = Vector3.One / (m_angularFrictionTimescale / pTimestep);
626 m_lastAngularVelocityVector -= m_lastAngularVelocityVector * decayamount;
627
628 } //end MoveAngular
629 }
630}