27 files changed, 8559 insertions, 3149 deletions

diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSAPIUnman.cs b/OpenSim/Region/Physics/BulletSPlugin/BSAPIUnman.cs
new file mode 100755
index 0000000..14de2eb
--- /dev/null
+++ b/OpenSim/Region/Physics/BulletSPlugin/BSAPIUnman.cs
@@ -0,0 +1,1863 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyrightD
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+using System;
+using System.Collections.Generic;
+using System.Reflection;
+using System.Runtime.InteropServices;
+using System.Security;
+using System.Text;
+
+using OpenSim.Framework;
+
+using OpenMetaverse;
+
+namespace OpenSim.Region.Physics.BulletSPlugin
+{
+public sealed class BSAPIUnman : BSAPITemplate
+{
+
+private sealed class BulletWorldUnman : BulletWorld
+{
+    public IntPtr ptr;
+    public BulletWorldUnman(uint id, BSScene physScene, IntPtr xx)
+        : base(id, physScene)
+    {
+        ptr = xx;
+    }
+}
+
+private sealed class BulletBodyUnman : BulletBody
+{
+    public IntPtr ptr;
+    public BulletBodyUnman(uint id, IntPtr xx)
+        : base(id)
+    {
+        ptr = xx;
+    }
+    public override bool HasPhysicalBody
+    {
+        get { return ptr != IntPtr.Zero; }
+    }
+    public override void Clear()
+    {
+        ptr = IntPtr.Zero;
+    }
+    public override string AddrString
+    {
+        get { return ptr.ToString("X"); }
+    }
+}
+
+private sealed class BulletShapeUnman : BulletShape
+{
+    public IntPtr ptr;
+    public BulletShapeUnman(IntPtr xx, BSPhysicsShapeType typ) 
+        : base()
+    {
+        ptr = xx;
+        type = typ;
+    }
+    public override bool HasPhysicalShape
+    {
+        get { return ptr != IntPtr.Zero; }
+    }
+    public override void Clear()
+    {
+        ptr = IntPtr.Zero;
+    }
+    public override BulletShape Clone()
+    {
+        return new BulletShapeUnman(ptr, type);
+    }
+    public override bool ReferenceSame(BulletShape other)
+    {
+        BulletShapeUnman otheru = other as BulletShapeUnman;
+        return (otheru != null) && (this.ptr == otheru.ptr);
+
+    }
+    public override string AddrString
+    {
+        get { return ptr.ToString("X"); }
+    }
+}
+private sealed class BulletConstraintUnman : BulletConstraint
+{
+    public BulletConstraintUnman(IntPtr xx) : base()
+    {
+        ptr = xx;
+    }
+    public IntPtr ptr;
+
+    public override void Clear()
+    {
+        ptr = IntPtr.Zero;
+    }
+    public override bool HasPhysicalConstraint { get { return ptr != IntPtr.Zero; } }
+
+    // Used for log messages for a unique display of the memory/object allocated to this instance
+    public override string AddrString
+    {
+        get { return ptr.ToString("X"); }
+    }
+}
+
+// We pin the memory passed between the managed and unmanaged code.
+GCHandle m_paramsHandle;
+private GCHandle m_collisionArrayPinnedHandle;
+private GCHandle m_updateArrayPinnedHandle;
+
+// Handle to the callback used by the unmanaged code to call into the managed code.
+// Used for debug logging.
+// Need to store the handle in a persistant variable so it won't be freed.
+private BSAPICPP.DebugLogCallback m_DebugLogCallbackHandle;
+
+private BSScene PhysicsScene { get; set; }
+
+public override string BulletEngineName { get { return "BulletUnmanaged"; } }
+public override string BulletEngineVersion { get; protected set; }
+
+public BSAPIUnman(string paramName, BSScene physScene)
+{
+    PhysicsScene = physScene;
+
+    // Do something fancy with the paramName to get the right DLL implementation
+    //     like "Bullet-2.80-OpenCL-Intel" loading the version for Intel based OpenCL implementation, etc.
+    if (Util.IsWindows())
+        Util.LoadArchSpecificWindowsDll("BulletSim.dll");
+    // If not Windows, loading is performed by the
+    // Mono loader as specified in
+    // "bin/Physics/OpenSim.Region.Physics.BulletSPlugin.dll.config".
+}
+
+// Initialization and simulation
+public override BulletWorld Initialize(Vector3 maxPosition, ConfigurationParameters parms,
+                                                                                        int maxCollisions,  ref CollisionDesc[] collisionArray,
+                                                                                        int maxUpdates, ref EntityProperties[] updateArray
+                                            )
+{
+    // Pin down the memory that will be used to pass object collisions and updates back from unmanaged code
+    m_paramsHandle = GCHandle.Alloc(parms, GCHandleType.Pinned);
+    m_collisionArrayPinnedHandle = GCHandle.Alloc(collisionArray, GCHandleType.Pinned);
+    m_updateArrayPinnedHandle = GCHandle.Alloc(updateArray, GCHandleType.Pinned);
+
+    // If Debug logging level, enable logging from the unmanaged code
+    m_DebugLogCallbackHandle = null;
+    if (BSScene.m_log.IsDebugEnabled || PhysicsScene.PhysicsLogging.Enabled)
+    {
+        BSScene.m_log.DebugFormat("{0}: Initialize: Setting debug callback for unmanaged code", BSScene.LogHeader);
+        if (PhysicsScene.PhysicsLogging.Enabled)
+            // The handle is saved in a variable to make sure it doesn't get freed after this call
+            m_DebugLogCallbackHandle = new BSAPICPP.DebugLogCallback(BulletLoggerPhysLog);
+        else
+            m_DebugLogCallbackHandle = new BSAPICPP.DebugLogCallback(BulletLogger);
+    }
+
+    // Get the version of the DLL
+    // TODO: this doesn't work yet. Something wrong with marshaling the returned string.
+    // BulletEngineVersion = BulletSimAPI.GetVersion2();
+    BulletEngineVersion = "";
+
+    // Call the unmanaged code with the buffers and other information
+    return new BulletWorldUnman(0, PhysicsScene, BSAPICPP.Initialize2(maxPosition, m_paramsHandle.AddrOfPinnedObject(),
+                                    maxCollisions, m_collisionArrayPinnedHandle.AddrOfPinnedObject(),
+                                    maxUpdates, m_updateArrayPinnedHandle.AddrOfPinnedObject(),
+                                    m_DebugLogCallbackHandle));
+
+}
+
+// Called directly from unmanaged code so don't do much
+private void BulletLogger(string msg)
+{
+    BSScene.m_log.Debug("[BULLETS UNMANAGED]:" + msg);
+}
+
+// Called directly from unmanaged code so don't do much
+private void BulletLoggerPhysLog(string msg)
+{
+    PhysicsScene.DetailLog("[BULLETS UNMANAGED]:" + msg);
+}
+
+public override int PhysicsStep(BulletWorld world, float timeStep, int maxSubSteps, float fixedTimeStep,
+                        out int updatedEntityCount, out int collidersCount)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    return BSAPICPP.PhysicsStep2(worldu.ptr, timeStep, maxSubSteps, fixedTimeStep, out updatedEntityCount, out collidersCount);
+}
+
+public override void Shutdown(BulletWorld world)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BSAPICPP.Shutdown2(worldu.ptr);
+}
+
+public override bool PushUpdate(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.PushUpdate2(bodyu.ptr);
+}
+
+public override bool UpdateParameter(BulletWorld world, uint localID, String parm, float value)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    return BSAPICPP.UpdateParameter2(worldu.ptr, localID, parm, value);
+}
+
+// =====================================================================================
+// Mesh, hull, shape and body creation helper routines
+public override BulletShape CreateMeshShape(BulletWorld world,
+                int indicesCount, int[] indices,
+                int verticesCount, float[] vertices)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    return new BulletShapeUnman(
+                    BSAPICPP.CreateMeshShape2(worldu.ptr, indicesCount, indices, verticesCount, vertices),
+                    BSPhysicsShapeType.SHAPE_MESH);
+}
+
+public override BulletShape CreateHullShape(BulletWorld world, int hullCount, float[] hulls)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    return new BulletShapeUnman(
+                    BSAPICPP.CreateHullShape2(worldu.ptr, hullCount, hulls), 
+                    BSPhysicsShapeType.SHAPE_HULL);
+}
+
+public override BulletShape BuildHullShapeFromMesh(BulletWorld world, BulletShape meshShape)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletShapeUnman shapeu = meshShape as BulletShapeUnman;
+    return new BulletShapeUnman(
+                    BSAPICPP.BuildHullShapeFromMesh2(worldu.ptr, shapeu.ptr),
+                    BSPhysicsShapeType.SHAPE_HULL);
+}
+
+public override BulletShape BuildNativeShape(BulletWorld world, ShapeData shapeData)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    return new BulletShapeUnman(BSAPICPP.BuildNativeShape2(worldu.ptr, shapeData), shapeData.Type);
+}
+
+public override bool IsNativeShape(BulletShape shape)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    if (shapeu != null && shapeu.HasPhysicalShape)
+        return BSAPICPP.IsNativeShape2(shapeu.ptr);
+    return false;
+}
+
+public override void SetShapeCollisionMargin(BulletShape shape, float margin)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    if (shapeu != null && shapeu.HasPhysicalShape)
+        BSAPICPP.SetShapeCollisionMargin2(shapeu.ptr, margin);
+}
+
+public override BulletShape BuildCapsuleShape(BulletWorld world, float radius, float height, Vector3 scale)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    return new BulletShapeUnman(
+                   BSAPICPP.BuildCapsuleShape2(worldu.ptr, radius, height, scale),
+                   BSPhysicsShapeType.SHAPE_CAPSULE);
+}
+
+public override BulletShape CreateCompoundShape(BulletWorld world, bool enableDynamicAabbTree)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    return new BulletShapeUnman(
+                    BSAPICPP.CreateCompoundShape2(worldu.ptr, enableDynamicAabbTree),
+                    BSPhysicsShapeType.SHAPE_COMPOUND);
+
+}
+
+public override int GetNumberOfCompoundChildren(BulletShape shape)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    if (shapeu != null && shapeu.HasPhysicalShape)
+        return BSAPICPP.GetNumberOfCompoundChildren2(shapeu.ptr);
+    return 0;
+}
+
+public override void AddChildShapeToCompoundShape(BulletShape shape, BulletShape addShape, Vector3 pos, Quaternion rot)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    BulletShapeUnman addShapeu = addShape as BulletShapeUnman;
+    BSAPICPP.AddChildShapeToCompoundShape2(shapeu.ptr, addShapeu.ptr, pos, rot);
+}
+
+public override BulletShape GetChildShapeFromCompoundShapeIndex(BulletShape shape, int indx)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    return new BulletShapeUnman(BSAPICPP.GetChildShapeFromCompoundShapeIndex2(shapeu.ptr, indx), BSPhysicsShapeType.SHAPE_UNKNOWN);
+}
+
+public override BulletShape RemoveChildShapeFromCompoundShapeIndex(BulletShape shape, int indx)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    return new BulletShapeUnman(BSAPICPP.RemoveChildShapeFromCompoundShapeIndex2(shapeu.ptr, indx), BSPhysicsShapeType.SHAPE_UNKNOWN);
+}
+
+public override void RemoveChildShapeFromCompoundShape(BulletShape shape, BulletShape removeShape)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    BulletShapeUnman removeShapeu = removeShape as BulletShapeUnman;
+    BSAPICPP.RemoveChildShapeFromCompoundShape2(shapeu.ptr, removeShapeu.ptr);
+}
+
+public override void RecalculateCompoundShapeLocalAabb(BulletShape shape)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    BSAPICPP.RecalculateCompoundShapeLocalAabb2(shapeu.ptr);
+}
+
+public override BulletShape DuplicateCollisionShape(BulletWorld world, BulletShape srcShape, uint id)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletShapeUnman srcShapeu = srcShape as BulletShapeUnman;
+    return new BulletShapeUnman(BSAPICPP.DuplicateCollisionShape2(worldu.ptr, srcShapeu.ptr, id), srcShape.type);
+}
+
+public override bool DeleteCollisionShape(BulletWorld world, BulletShape shape)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    return BSAPICPP.DeleteCollisionShape2(worldu.ptr, shapeu.ptr);
+}
+
+public override CollisionObjectTypes GetBodyType(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return (CollisionObjectTypes)BSAPICPP.GetBodyType2(bodyu.ptr);
+}
+
+public override BulletBody CreateBodyFromShape(BulletWorld world, BulletShape shape, uint id, Vector3 pos, Quaternion rot)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    return new BulletBodyUnman(id, BSAPICPP.CreateBodyFromShape2(worldu.ptr, shapeu.ptr, id, pos, rot));
+}
+
+public override BulletBody CreateBodyWithDefaultMotionState(BulletShape shape, uint id, Vector3 pos, Quaternion rot)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    return new BulletBodyUnman(id, BSAPICPP.CreateBodyWithDefaultMotionState2(shapeu.ptr, id, pos, rot));
+}
+
+public override BulletBody CreateGhostFromShape(BulletWorld world, BulletShape shape, uint id, Vector3 pos, Quaternion rot)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    return new BulletBodyUnman(id, BSAPICPP.CreateGhostFromShape2(worldu.ptr, shapeu.ptr, id, pos, rot));
+}
+
+public override void DestroyObject(BulletWorld world, BulletBody obj)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.DestroyObject2(worldu.ptr, bodyu.ptr);
+}
+
+// =====================================================================================
+// Terrain creation and helper routines
+public override BulletShape CreateGroundPlaneShape(uint id, float height, float collisionMargin)
+{
+    return new BulletShapeUnman(BSAPICPP.CreateGroundPlaneShape2(id, height, collisionMargin), BSPhysicsShapeType.SHAPE_GROUNDPLANE);
+}
+
+public override BulletShape CreateTerrainShape(uint id, Vector3 size, float minHeight, float maxHeight, float[] heightMap,
+                                float scaleFactor, float collisionMargin)
+{
+    return new BulletShapeUnman(BSAPICPP.CreateTerrainShape2(id, size, minHeight, maxHeight, heightMap, scaleFactor, collisionMargin),
+                                                BSPhysicsShapeType.SHAPE_TERRAIN);
+}
+
+// =====================================================================================
+// Constraint creation and helper routines
+public override BulletConstraint Create6DofConstraint(BulletWorld world, BulletBody obj1, BulletBody obj2,
+                    Vector3 frame1loc, Quaternion frame1rot,
+                    Vector3 frame2loc, Quaternion frame2rot,
+                    bool useLinearReferenceFrameA, bool disableCollisionsBetweenLinkedBodies)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletBodyUnman bodyu1 = obj1 as BulletBodyUnman;
+    BulletBodyUnman bodyu2 = obj2 as BulletBodyUnman;
+    return new BulletConstraintUnman(BSAPICPP.Create6DofConstraint2(worldu.ptr, bodyu1.ptr, bodyu2.ptr, frame1loc, frame1rot,
+                    frame2loc, frame2rot, useLinearReferenceFrameA, disableCollisionsBetweenLinkedBodies));
+}
+
+public override BulletConstraint Create6DofConstraintToPoint(BulletWorld world, BulletBody obj1, BulletBody obj2,
+                    Vector3 joinPoint,
+                    bool useLinearReferenceFrameA, bool disableCollisionsBetweenLinkedBodies)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletBodyUnman bodyu1 = obj1 as BulletBodyUnman;
+    BulletBodyUnman bodyu2 = obj2 as BulletBodyUnman;
+    return new BulletConstraintUnman(BSAPICPP.Create6DofConstraintToPoint2(worldu.ptr, bodyu1.ptr, bodyu2.ptr,
+                    joinPoint, useLinearReferenceFrameA, disableCollisionsBetweenLinkedBodies));
+}
+
+public override BulletConstraint CreateHingeConstraint(BulletWorld world, BulletBody obj1, BulletBody obj2,
+                    Vector3 pivotinA, Vector3 pivotinB,
+                    Vector3 axisInA, Vector3 axisInB,
+                    bool useLinearReferenceFrameA, bool disableCollisionsBetweenLinkedBodies)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletBodyUnman bodyu1 = obj1 as BulletBodyUnman;
+    BulletBodyUnman bodyu2 = obj2 as BulletBodyUnman;
+    return new BulletConstraintUnman(BSAPICPP.CreateHingeConstraint2(worldu.ptr, bodyu1.ptr, bodyu2.ptr,
+                    pivotinA, pivotinB, axisInA, axisInB, useLinearReferenceFrameA, disableCollisionsBetweenLinkedBodies));
+}
+
+public override void SetConstraintEnable(BulletConstraint constrain, float numericTrueFalse)
+{
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    BSAPICPP.SetConstraintEnable2(constrainu.ptr, numericTrueFalse);
+}
+
+public override void SetConstraintNumSolverIterations(BulletConstraint constrain, float iterations)
+{
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    BSAPICPP.SetConstraintNumSolverIterations2(constrainu.ptr, iterations);
+}
+
+public override bool SetFrames(BulletConstraint constrain,
+                Vector3 frameA, Quaternion frameArot, Vector3 frameB, Quaternion frameBrot)
+{
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    return BSAPICPP.SetFrames2(constrainu.ptr, frameA, frameArot, frameB, frameBrot);
+}
+
+public override bool SetLinearLimits(BulletConstraint constrain, Vector3 low, Vector3 hi)
+{
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    return BSAPICPP.SetLinearLimits2(constrainu.ptr, low, hi);
+}
+
+public override bool SetAngularLimits(BulletConstraint constrain, Vector3 low, Vector3 hi)
+{
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    return BSAPICPP.SetAngularLimits2(constrainu.ptr, low, hi);
+}
+
+public override bool UseFrameOffset(BulletConstraint constrain, float enable)
+{
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    return BSAPICPP.UseFrameOffset2(constrainu.ptr, enable);
+}
+
+public override bool TranslationalLimitMotor(BulletConstraint constrain, float enable, float targetVel, float maxMotorForce)
+{
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    return BSAPICPP.TranslationalLimitMotor2(constrainu.ptr, enable, targetVel, maxMotorForce);
+}
+
+public override bool SetBreakingImpulseThreshold(BulletConstraint constrain, float threshold)
+{
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    return BSAPICPP.SetBreakingImpulseThreshold2(constrainu.ptr, threshold);
+}
+
+public override bool CalculateTransforms(BulletConstraint constrain)
+{
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    return BSAPICPP.CalculateTransforms2(constrainu.ptr);
+}
+
+public override bool SetConstraintParam(BulletConstraint constrain, ConstraintParams paramIndex, float value, ConstraintParamAxis axis)
+{
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    return BSAPICPP.SetConstraintParam2(constrainu.ptr, paramIndex, value, axis);
+}
+
+public override bool DestroyConstraint(BulletWorld world, BulletConstraint constrain)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    return BSAPICPP.DestroyConstraint2(worldu.ptr, constrainu.ptr);
+}
+
+// =====================================================================================
+// btCollisionWorld entries
+public override void UpdateSingleAabb(BulletWorld world, BulletBody obj)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.UpdateSingleAabb2(worldu.ptr, bodyu.ptr);
+}
+
+public override void UpdateAabbs(BulletWorld world)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BSAPICPP.UpdateAabbs2(worldu.ptr);
+}
+
+public override bool GetForceUpdateAllAabbs(BulletWorld world)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    return BSAPICPP.GetForceUpdateAllAabbs2(worldu.ptr);
+}
+
+public override void SetForceUpdateAllAabbs(BulletWorld world, bool force)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BSAPICPP.SetForceUpdateAllAabbs2(worldu.ptr, force);
+}
+
+// =====================================================================================
+// btDynamicsWorld entries
+public override bool AddObjectToWorld(BulletWorld world, BulletBody obj)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+
+    // Bullet resets several variables when an object is added to the world.
+    //   Gravity is reset to world default depending on the static/dynamic
+    //   type. Of course, the collision flags in the broadphase proxy are initialized to default.
+    Vector3 origGrav = BSAPICPP.GetGravity2(bodyu.ptr);
+
+    bool ret = BSAPICPP.AddObjectToWorld2(worldu.ptr, bodyu.ptr);
+
+    if (ret)
+    {
+        BSAPICPP.SetGravity2(bodyu.ptr, origGrav);
+        obj.ApplyCollisionMask(world.physicsScene);
+    }
+    return ret;
+}
+
+public override bool RemoveObjectFromWorld(BulletWorld world, BulletBody obj)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.RemoveObjectFromWorld2(worldu.ptr, bodyu.ptr);
+}
+
+public override bool AddConstraintToWorld(BulletWorld world, BulletConstraint constrain, bool disableCollisionsBetweenLinkedObjects)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    return BSAPICPP.AddConstraintToWorld2(worldu.ptr, constrainu.ptr, disableCollisionsBetweenLinkedObjects);
+}
+
+public override bool RemoveConstraintFromWorld(BulletWorld world, BulletConstraint constrain)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    return BSAPICPP.RemoveConstraintFromWorld2(worldu.ptr, constrainu.ptr);
+}
+// =====================================================================================
+// btCollisionObject entries
+public override Vector3 GetAnisotripicFriction(BulletConstraint constrain)
+{
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    return BSAPICPP.GetAnisotripicFriction2(constrainu.ptr);
+}
+
+public override Vector3 SetAnisotripicFriction(BulletConstraint constrain, Vector3 frict)
+{
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    return BSAPICPP.SetAnisotripicFriction2(constrainu.ptr, frict);
+}
+
+public override bool HasAnisotripicFriction(BulletConstraint constrain)
+{
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    return BSAPICPP.HasAnisotripicFriction2(constrainu.ptr);
+}
+
+public override void SetContactProcessingThreshold(BulletBody obj, float val)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetContactProcessingThreshold2(bodyu.ptr, val);
+}
+
+public override float GetContactProcessingThreshold(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetContactProcessingThreshold2(bodyu.ptr);
+}
+
+public override bool IsStaticObject(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.IsStaticObject2(bodyu.ptr);
+}
+
+public override bool IsKinematicObject(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.IsKinematicObject2(bodyu.ptr);
+}
+
+public override bool IsStaticOrKinematicObject(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.IsStaticOrKinematicObject2(bodyu.ptr);
+}
+
+public override bool HasContactResponse(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.HasContactResponse2(bodyu.ptr);
+}
+
+public override void SetCollisionShape(BulletWorld world, BulletBody obj, BulletShape shape)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    if (worldu != null && bodyu != null)
+    {
+        // Special case to allow the caller to zero out the reference to any physical shape
+        if (shapeu != null)
+            BSAPICPP.SetCollisionShape2(worldu.ptr, bodyu.ptr, shapeu.ptr);
+        else
+            BSAPICPP.SetCollisionShape2(worldu.ptr, bodyu.ptr, IntPtr.Zero);
+    }
+}
+
+public override BulletShape GetCollisionShape(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return new BulletShapeUnman(BSAPICPP.GetCollisionShape2(bodyu.ptr), BSPhysicsShapeType.SHAPE_UNKNOWN);
+}
+
+public override int GetActivationState(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetActivationState2(bodyu.ptr);
+}
+
+public override void SetActivationState(BulletBody obj, int state)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetActivationState2(bodyu.ptr, state);
+}
+
+public override void SetDeactivationTime(BulletBody obj, float dtime)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetDeactivationTime2(bodyu.ptr, dtime);
+}
+
+public override float GetDeactivationTime(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetDeactivationTime2(bodyu.ptr);
+}
+
+public override void ForceActivationState(BulletBody obj, ActivationState state)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.ForceActivationState2(bodyu.ptr, state);
+}
+
+public override void Activate(BulletBody obj, bool forceActivation)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.Activate2(bodyu.ptr, forceActivation);
+}
+
+public override bool IsActive(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.IsActive2(bodyu.ptr);
+}
+
+public override void SetRestitution(BulletBody obj, float val)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetRestitution2(bodyu.ptr, val);
+}
+
+public override float GetRestitution(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetRestitution2(bodyu.ptr);
+}
+
+public override void SetFriction(BulletBody obj, float val)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetFriction2(bodyu.ptr, val);
+}
+
+public override float GetFriction(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetFriction2(bodyu.ptr);
+}
+
+public override Vector3 GetPosition(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetPosition2(bodyu.ptr);
+}
+
+public override Quaternion GetOrientation(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetOrientation2(bodyu.ptr);
+}
+
+public override void SetTranslation(BulletBody obj, Vector3 position, Quaternion rotation)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetTranslation2(bodyu.ptr, position, rotation);
+}
+
+    /*
+public override IntPtr GetBroadphaseHandle(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetBroadphaseHandle2(bodyu.ptr);
+}
+
+public override void SetBroadphaseHandle(BulletBody obj, IntPtr handle)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetUserPointer2(bodyu.ptr, handle);
+}
+     */
+
+public override void SetInterpolationLinearVelocity(BulletBody obj, Vector3 vel)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetInterpolationLinearVelocity2(bodyu.ptr, vel);
+}
+
+public override void SetInterpolationAngularVelocity(BulletBody obj, Vector3 vel)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetInterpolationAngularVelocity2(bodyu.ptr, vel);
+}
+
+public override void SetInterpolationVelocity(BulletBody obj, Vector3 linearVel, Vector3 angularVel)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetInterpolationVelocity2(bodyu.ptr, linearVel, angularVel);
+}
+
+public override float GetHitFraction(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetHitFraction2(bodyu.ptr);
+}
+
+public override void SetHitFraction(BulletBody obj, float val)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetHitFraction2(bodyu.ptr, val);
+}
+
+public override CollisionFlags GetCollisionFlags(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetCollisionFlags2(bodyu.ptr);
+}
+
+public override CollisionFlags SetCollisionFlags(BulletBody obj, CollisionFlags flags)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.SetCollisionFlags2(bodyu.ptr, flags);
+}
+
+public override CollisionFlags AddToCollisionFlags(BulletBody obj, CollisionFlags flags)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.AddToCollisionFlags2(bodyu.ptr, flags);
+}
+
+public override CollisionFlags RemoveFromCollisionFlags(BulletBody obj, CollisionFlags flags)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.RemoveFromCollisionFlags2(bodyu.ptr, flags);
+}
+
+public override float GetCcdMotionThreshold(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetCcdMotionThreshold2(bodyu.ptr);
+}
+
+
+public override void SetCcdMotionThreshold(BulletBody obj, float val)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetCcdMotionThreshold2(bodyu.ptr, val);
+}
+
+public override float GetCcdSweptSphereRadius(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetCcdSweptSphereRadius2(bodyu.ptr);
+}
+
+public override void SetCcdSweptSphereRadius(BulletBody obj, float val)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetCcdSweptSphereRadius2(bodyu.ptr, val);
+}
+
+public override IntPtr GetUserPointer(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetUserPointer2(bodyu.ptr);
+}
+
+public override void SetUserPointer(BulletBody obj, IntPtr val)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetUserPointer2(bodyu.ptr, val);
+}
+
+// =====================================================================================
+// btRigidBody entries
+public override void ApplyGravity(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.ApplyGravity2(bodyu.ptr);
+}
+
+public override void SetGravity(BulletBody obj, Vector3 val)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetGravity2(bodyu.ptr, val);
+}
+
+public override Vector3 GetGravity(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetGravity2(bodyu.ptr);
+}
+
+public override void SetDamping(BulletBody obj, float lin_damping, float ang_damping)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetDamping2(bodyu.ptr, lin_damping, ang_damping);
+}
+
+public override void SetLinearDamping(BulletBody obj, float lin_damping)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetLinearDamping2(bodyu.ptr, lin_damping);
+}
+
+public override void SetAngularDamping(BulletBody obj, float ang_damping)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetAngularDamping2(bodyu.ptr, ang_damping);
+}
+
+public override float GetLinearDamping(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetLinearDamping2(bodyu.ptr);
+}
+
+public override float GetAngularDamping(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetAngularDamping2(bodyu.ptr);
+}
+
+public override float GetLinearSleepingThreshold(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetLinearSleepingThreshold2(bodyu.ptr);
+}
+
+public override void ApplyDamping(BulletBody obj, float timeStep)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.ApplyDamping2(bodyu.ptr, timeStep);
+}
+
+public override void SetMassProps(BulletBody obj, float mass, Vector3 inertia)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetMassProps2(bodyu.ptr, mass, inertia);
+}
+
+public override Vector3 GetLinearFactor(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetLinearFactor2(bodyu.ptr);
+}
+
+public override void SetLinearFactor(BulletBody obj, Vector3 factor)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetLinearFactor2(bodyu.ptr, factor);
+}
+
+public override void SetCenterOfMassByPosRot(BulletBody obj, Vector3 pos, Quaternion rot)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetCenterOfMassByPosRot2(bodyu.ptr, pos, rot);
+}
+
+// Add a force to the object as if its mass is one.
+// Deep down in Bullet: m_totalForce += force*m_linearFactor;
+public override void ApplyCentralForce(BulletBody obj, Vector3 force)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.ApplyCentralForce2(bodyu.ptr, force);
+}
+
+// Set the force being applied to the object as if its mass is one.
+public override void SetObjectForce(BulletBody obj, Vector3 force)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetObjectForce2(bodyu.ptr, force);
+}
+
+public override Vector3 GetTotalForce(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetTotalForce2(bodyu.ptr);
+}
+
+public override Vector3 GetTotalTorque(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetTotalTorque2(bodyu.ptr);
+}
+
+public override Vector3 GetInvInertiaDiagLocal(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetInvInertiaDiagLocal2(bodyu.ptr);
+}
+
+public override void SetInvInertiaDiagLocal(BulletBody obj, Vector3 inert)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetInvInertiaDiagLocal2(bodyu.ptr, inert);
+}
+
+public override void SetSleepingThresholds(BulletBody obj, float lin_threshold, float ang_threshold)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetSleepingThresholds2(bodyu.ptr, lin_threshold, ang_threshold);
+}
+
+// Deep down in Bullet: m_totalTorque += torque*m_angularFactor;
+public override void ApplyTorque(BulletBody obj, Vector3 torque)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.ApplyTorque2(bodyu.ptr, torque);
+}
+
+// Apply force at the given point. Will add torque to the object.
+// Deep down in Bullet: applyCentralForce(force);
+//                              applyTorque(rel_pos.cross(force*m_linearFactor));
+public override void ApplyForce(BulletBody obj, Vector3 force, Vector3 pos)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.ApplyForce2(bodyu.ptr, force, pos);
+}
+
+// Apply impulse to the object. Same as "ApplycentralForce" but force scaled by object's mass.
+// Deep down in Bullet: m_linearVelocity += impulse *m_linearFactor * m_inverseMass;
+public override void ApplyCentralImpulse(BulletBody obj, Vector3 imp)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.ApplyCentralImpulse2(bodyu.ptr, imp);
+}
+
+// Apply impulse to the object's torque. Force is scaled by object's mass.
+// Deep down in Bullet: m_angularVelocity += m_invInertiaTensorWorld * torque * m_angularFactor;
+public override void ApplyTorqueImpulse(BulletBody obj, Vector3 imp)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.ApplyTorqueImpulse2(bodyu.ptr, imp);
+}
+
+// Apply impulse at the point given. For is scaled by object's mass and effects both linear and angular forces.
+// Deep down in Bullet: applyCentralImpulse(impulse);
+//                              applyTorqueImpulse(rel_pos.cross(impulse*m_linearFactor));
+public override void ApplyImpulse(BulletBody obj, Vector3 imp, Vector3 pos)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.ApplyImpulse2(bodyu.ptr, imp, pos);
+}
+
+public override void ClearForces(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.ClearForces2(bodyu.ptr);
+}
+
+public override void ClearAllForces(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.ClearAllForces2(bodyu.ptr);
+}
+
+public override void UpdateInertiaTensor(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.UpdateInertiaTensor2(bodyu.ptr);
+}
+
+public override Vector3 GetLinearVelocity(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetLinearVelocity2(bodyu.ptr);
+}
+
+public override Vector3 GetAngularVelocity(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetAngularVelocity2(bodyu.ptr);
+}
+
+public override void SetLinearVelocity(BulletBody obj, Vector3 vel)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetLinearVelocity2(bodyu.ptr, vel);
+}
+
+public override void SetAngularVelocity(BulletBody obj, Vector3 angularVelocity)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetAngularVelocity2(bodyu.ptr, angularVelocity);
+}
+
+public override Vector3 GetVelocityInLocalPoint(BulletBody obj, Vector3 pos)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetVelocityInLocalPoint2(bodyu.ptr, pos);
+}
+
+public override void Translate(BulletBody obj, Vector3 trans)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.Translate2(bodyu.ptr, trans);
+}
+
+public override void UpdateDeactivation(BulletBody obj, float timeStep)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.UpdateDeactivation2(bodyu.ptr, timeStep);
+}
+
+public override bool WantsSleeping(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.WantsSleeping2(bodyu.ptr);
+}
+
+public override void SetAngularFactor(BulletBody obj, float factor)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetAngularFactor2(bodyu.ptr, factor);
+}
+
+public override void SetAngularFactorV(BulletBody obj, Vector3 factor)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetAngularFactorV2(bodyu.ptr, factor);
+}
+
+public override Vector3 GetAngularFactor(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetAngularFactor2(bodyu.ptr);
+}
+
+public override bool IsInWorld(BulletWorld world, BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.IsInWorld2(bodyu.ptr);
+}
+
+public override void AddConstraintRef(BulletBody obj, BulletConstraint constrain)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    BSAPICPP.AddConstraintRef2(bodyu.ptr, constrainu.ptr);
+}
+
+public override void RemoveConstraintRef(BulletBody obj, BulletConstraint constrain)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    BSAPICPP.RemoveConstraintRef2(bodyu.ptr, constrainu.ptr);
+}
+
+public override BulletConstraint GetConstraintRef(BulletBody obj, int index)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return new BulletConstraintUnman(BSAPICPP.GetConstraintRef2(bodyu.ptr, index));
+}
+
+public override int GetNumConstraintRefs(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetNumConstraintRefs2(bodyu.ptr);
+}
+
+public override bool SetCollisionGroupMask(BulletBody body, uint filter, uint mask)
+{
+    BulletBodyUnman bodyu = body as BulletBodyUnman;
+    return BSAPICPP.SetCollisionGroupMask2(bodyu.ptr, filter, mask);
+}
+
+// =====================================================================================
+// btCollisionShape entries
+
+public override float GetAngularMotionDisc(BulletShape shape)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    return BSAPICPP.GetAngularMotionDisc2(shapeu.ptr);
+}
+
+public override float GetContactBreakingThreshold(BulletShape shape, float defaultFactor)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    return BSAPICPP.GetContactBreakingThreshold2(shapeu.ptr, defaultFactor);
+}
+
+public override bool IsPolyhedral(BulletShape shape)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    return BSAPICPP.IsPolyhedral2(shapeu.ptr);
+}
+
+public override bool IsConvex2d(BulletShape shape)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    return BSAPICPP.IsConvex2d2(shapeu.ptr);
+}
+
+public override bool IsConvex(BulletShape shape)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    return BSAPICPP.IsConvex2(shapeu.ptr);
+}
+
+public override bool IsNonMoving(BulletShape shape)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    return BSAPICPP.IsNonMoving2(shapeu.ptr);
+}
+
+public override bool IsConcave(BulletShape shape)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    return BSAPICPP.IsConcave2(shapeu.ptr);
+}
+
+public override bool IsCompound(BulletShape shape)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    return BSAPICPP.IsCompound2(shapeu.ptr);
+}
+
+public override bool IsSoftBody(BulletShape shape)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    return BSAPICPP.IsSoftBody2(shapeu.ptr);
+}
+
+public override bool IsInfinite(BulletShape shape)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    return BSAPICPP.IsInfinite2(shapeu.ptr);
+}
+
+public override void SetLocalScaling(BulletShape shape, Vector3 scale)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    BSAPICPP.SetLocalScaling2(shapeu.ptr, scale);
+}
+
+public override Vector3 GetLocalScaling(BulletShape shape)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    return BSAPICPP.GetLocalScaling2(shapeu.ptr);
+}
+
+public override Vector3 CalculateLocalInertia(BulletShape shape, float mass)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    return BSAPICPP.CalculateLocalInertia2(shapeu.ptr, mass);
+}
+
+public override int GetShapeType(BulletShape shape)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    return BSAPICPP.GetShapeType2(shapeu.ptr);
+}
+
+public override void SetMargin(BulletShape shape, float val)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    BSAPICPP.SetMargin2(shapeu.ptr, val);
+}
+
+public override float GetMargin(BulletShape shape)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    return BSAPICPP.GetMargin2(shapeu.ptr);
+}
+
+// =====================================================================================
+// Debugging
+public override void DumpRigidBody(BulletWorld world, BulletBody collisionObject)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletBodyUnman bodyu = collisionObject as BulletBodyUnman;
+    BSAPICPP.DumpRigidBody2(worldu.ptr, bodyu.ptr);
+}
+
+public override void DumpCollisionShape(BulletWorld world, BulletShape collisionShape)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletShapeUnman shapeu = collisionShape as BulletShapeUnman;
+    BSAPICPP.DumpCollisionShape2(worldu.ptr, shapeu.ptr);
+}
+
+public override void DumpConstraint(BulletWorld world, BulletConstraint constrain)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    BSAPICPP.DumpConstraint2(worldu.ptr, constrainu.ptr);
+}
+
+public override void DumpActivationInfo(BulletWorld world)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BSAPICPP.DumpActivationInfo2(worldu.ptr);
+}
+
+public override void DumpAllInfo(BulletWorld world)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BSAPICPP.DumpAllInfo2(worldu.ptr);
+}
+
+public override void DumpPhysicsStatistics(BulletWorld world)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BSAPICPP.DumpPhysicsStatistics2(worldu.ptr);
+}
+public override void ResetBroadphasePool(BulletWorld world)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BSAPICPP.ResetBroadphasePool(worldu.ptr);
+}
+public override void ResetConstraintSolver(BulletWorld world)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BSAPICPP.ResetConstraintSolver(worldu.ptr);
+}
+
+// =====================================================================================
+// =====================================================================================
+// =====================================================================================
+// =====================================================================================
+// =====================================================================================
+// The actual interface to the unmanaged code
+static class BSAPICPP
+{
+// ===============================================================================
+// Link back to the managed code for outputting log messages
+[UnmanagedFunctionPointer(CallingConvention.Cdecl)]
+public delegate void DebugLogCallback([MarshalAs(UnmanagedType.LPStr)]string msg);
+
+// ===============================================================================
+// Initialization and simulation
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr Initialize2(Vector3 maxPosition, IntPtr parms,
+                                                                                        int maxCollisions,  IntPtr collisionArray,
+                                                                                        int maxUpdates, IntPtr updateArray,
+                                            DebugLogCallback logRoutine);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern int PhysicsStep2(IntPtr world, float timeStep, int maxSubSteps, float fixedTimeStep,
+                        out int updatedEntityCount, out int collidersCount);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void Shutdown2(IntPtr sim);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool PushUpdate2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool UpdateParameter2(IntPtr world, uint localID, String parm, float value);
+
+// =====================================================================================
+// Mesh, hull, shape and body creation helper routines
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr CreateMeshShape2(IntPtr world,
+                int indicesCount, [MarshalAs(UnmanagedType.LPArray)] int[] indices,
+                int verticesCount, [MarshalAs(UnmanagedType.LPArray)] float[] vertices );
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr CreateHullShape2(IntPtr world,
+                int hullCount, [MarshalAs(UnmanagedType.LPArray)] float[] hulls);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr BuildHullShapeFromMesh2(IntPtr world, IntPtr meshShape);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr BuildNativeShape2(IntPtr world, ShapeData shapeData);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool IsNativeShape2(IntPtr shape);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetShapeCollisionMargin2(IntPtr shape, float margin);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr BuildCapsuleShape2(IntPtr world, float radius, float height, Vector3 scale);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr CreateCompoundShape2(IntPtr sim, bool enableDynamicAabbTree);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern int GetNumberOfCompoundChildren2(IntPtr cShape);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void AddChildShapeToCompoundShape2(IntPtr cShape, IntPtr addShape, Vector3 pos, Quaternion rot);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr GetChildShapeFromCompoundShapeIndex2(IntPtr cShape, int indx);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr RemoveChildShapeFromCompoundShapeIndex2(IntPtr cShape, int indx);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void RemoveChildShapeFromCompoundShape2(IntPtr cShape, IntPtr removeShape);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void RecalculateCompoundShapeLocalAabb2(IntPtr cShape);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr DuplicateCollisionShape2(IntPtr sim, IntPtr srcShape, uint id);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool DeleteCollisionShape2(IntPtr world, IntPtr shape);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern int GetBodyType2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr CreateBodyFromShape2(IntPtr sim, IntPtr shape, uint id, Vector3 pos, Quaternion rot);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr CreateBodyWithDefaultMotionState2(IntPtr shape, uint id, Vector3 pos, Quaternion rot);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr CreateGhostFromShape2(IntPtr sim, IntPtr shape, uint id, Vector3 pos, Quaternion rot);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void DestroyObject2(IntPtr sim, IntPtr obj);
+
+// =====================================================================================
+// Terrain creation and helper routines
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr CreateGroundPlaneShape2(uint id, float height, float collisionMargin);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr CreateTerrainShape2(uint id, Vector3 size, float minHeight, float maxHeight, 
+                                            [MarshalAs(UnmanagedType.LPArray)] float[] heightMap,
+                                            float scaleFactor, float collisionMargin);
+
+// =====================================================================================
+// Constraint creation and helper routines
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr Create6DofConstraint2(IntPtr world, IntPtr obj1, IntPtr obj2,
+                    Vector3 frame1loc, Quaternion frame1rot,
+                    Vector3 frame2loc, Quaternion frame2rot,
+                    bool useLinearReferenceFrameA, bool disableCollisionsBetweenLinkedBodies);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr Create6DofConstraintToPoint2(IntPtr world, IntPtr obj1, IntPtr obj2,
+                    Vector3 joinPoint,
+                    bool useLinearReferenceFrameA, bool disableCollisionsBetweenLinkedBodies);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr CreateHingeConstraint2(IntPtr world, IntPtr obj1, IntPtr obj2,
+                    Vector3 pivotinA, Vector3 pivotinB,
+                    Vector3 axisInA, Vector3 axisInB,
+                    bool useLinearReferenceFrameA, bool disableCollisionsBetweenLinkedBodies);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetConstraintEnable2(IntPtr constrain, float numericTrueFalse);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetConstraintNumSolverIterations2(IntPtr constrain, float iterations);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool SetFrames2(IntPtr constrain,
+                Vector3 frameA, Quaternion frameArot, Vector3 frameB, Quaternion frameBrot);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool SetLinearLimits2(IntPtr constrain, Vector3 low, Vector3 hi);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool SetAngularLimits2(IntPtr constrain, Vector3 low, Vector3 hi);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool UseFrameOffset2(IntPtr constrain, float enable);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool TranslationalLimitMotor2(IntPtr constrain, float enable, float targetVel, float maxMotorForce);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool SetBreakingImpulseThreshold2(IntPtr constrain, float threshold);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool CalculateTransforms2(IntPtr constrain);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool SetConstraintParam2(IntPtr constrain, ConstraintParams paramIndex, float value, ConstraintParamAxis axis);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool DestroyConstraint2(IntPtr world, IntPtr constrain);
+
+// =====================================================================================
+// btCollisionWorld entries
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void UpdateSingleAabb2(IntPtr world, IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void UpdateAabbs2(IntPtr world);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool GetForceUpdateAllAabbs2(IntPtr world);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetForceUpdateAllAabbs2(IntPtr world, bool force);
+
+// =====================================================================================
+// btDynamicsWorld entries
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool AddObjectToWorld2(IntPtr world, IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool RemoveObjectFromWorld2(IntPtr world, IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool AddConstraintToWorld2(IntPtr world, IntPtr constrain, bool disableCollisionsBetweenLinkedObjects);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool RemoveConstraintFromWorld2(IntPtr world, IntPtr constrain);
+// =====================================================================================
+// btCollisionObject entries
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern Vector3 GetAnisotripicFriction2(IntPtr constrain);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern Vector3 SetAnisotripicFriction2(IntPtr constrain, Vector3 frict);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool HasAnisotripicFriction2(IntPtr constrain);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetContactProcessingThreshold2(IntPtr obj, float val);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern float GetContactProcessingThreshold2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool IsStaticObject2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool IsKinematicObject2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool IsStaticOrKinematicObject2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool HasContactResponse2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetCollisionShape2(IntPtr sim, IntPtr obj, IntPtr shape);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr GetCollisionShape2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern int GetActivationState2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetActivationState2(IntPtr obj, int state);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetDeactivationTime2(IntPtr obj, float dtime);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern float GetDeactivationTime2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void ForceActivationState2(IntPtr obj, ActivationState state);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void Activate2(IntPtr obj, bool forceActivation);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool IsActive2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetRestitution2(IntPtr obj, float val);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern float GetRestitution2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetFriction2(IntPtr obj, float val);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern float GetFriction2(IntPtr obj);
+
+    /* Haven't defined the type 'Transform'
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern Transform GetWorldTransform2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void setWorldTransform2(IntPtr obj, Transform trans);
+     */
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern Vector3 GetPosition2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern Quaternion GetOrientation2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetTranslation2(IntPtr obj, Vector3 position, Quaternion rotation);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr GetBroadphaseHandle2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetBroadphaseHandle2(IntPtr obj, IntPtr handle);
+
+    /*
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern Transform GetInterpolationWorldTransform2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetInterpolationWorldTransform2(IntPtr obj, Transform trans);
+     */
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetInterpolationLinearVelocity2(IntPtr obj, Vector3 vel);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetInterpolationAngularVelocity2(IntPtr obj, Vector3 vel);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetInterpolationVelocity2(IntPtr obj, Vector3 linearVel, Vector3 angularVel);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern float GetHitFraction2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetHitFraction2(IntPtr obj, float val);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern CollisionFlags GetCollisionFlags2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern CollisionFlags SetCollisionFlags2(IntPtr obj, CollisionFlags flags);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern CollisionFlags AddToCollisionFlags2(IntPtr obj, CollisionFlags flags);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern CollisionFlags RemoveFromCollisionFlags2(IntPtr obj, CollisionFlags flags);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern float GetCcdMotionThreshold2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetCcdMotionThreshold2(IntPtr obj, float val);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern float GetCcdSweptSphereRadius2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetCcdSweptSphereRadius2(IntPtr obj, float val);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr GetUserPointer2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetUserPointer2(IntPtr obj, IntPtr val);
+
+// =====================================================================================
+// btRigidBody entries
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void ApplyGravity2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetGravity2(IntPtr obj, Vector3 val);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern Vector3 GetGravity2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetDamping2(IntPtr obj, float lin_damping, float ang_damping);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetLinearDamping2(IntPtr obj, float lin_damping);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetAngularDamping2(IntPtr obj, float ang_damping);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern float GetLinearDamping2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern float GetAngularDamping2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern float GetLinearSleepingThreshold2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern float GetAngularSleepingThreshold2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void ApplyDamping2(IntPtr obj, float timeStep);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetMassProps2(IntPtr obj, float mass, Vector3 inertia);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern Vector3 GetLinearFactor2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetLinearFactor2(IntPtr obj, Vector3 factor);
+
+    /*
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetCenterOfMassTransform2(IntPtr obj, Transform trans);
+     */
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetCenterOfMassByPosRot2(IntPtr obj, Vector3 pos, Quaternion rot);
+
+// Add a force to the object as if its mass is one.
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void ApplyCentralForce2(IntPtr obj, Vector3 force);
+
+// Set the force being applied to the object as if its mass is one.
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetObjectForce2(IntPtr obj, Vector3 force);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern Vector3 GetTotalForce2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern Vector3 GetTotalTorque2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern Vector3 GetInvInertiaDiagLocal2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetInvInertiaDiagLocal2(IntPtr obj, Vector3 inert);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetSleepingThresholds2(IntPtr obj, float lin_threshold, float ang_threshold);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void ApplyTorque2(IntPtr obj, Vector3 torque);
+
+// Apply force at the given point. Will add torque to the object.
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void ApplyForce2(IntPtr obj, Vector3 force, Vector3 pos);
+
+// Apply impulse to the object. Same as "ApplycentralForce" but force scaled by object's mass.
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void ApplyCentralImpulse2(IntPtr obj, Vector3 imp);
+
+// Apply impulse to the object's torque. Force is scaled by object's mass.
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void ApplyTorqueImpulse2(IntPtr obj, Vector3 imp);
+
+// Apply impulse at the point given. For is scaled by object's mass and effects both linear and angular forces.
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void ApplyImpulse2(IntPtr obj, Vector3 imp, Vector3 pos);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void ClearForces2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void ClearAllForces2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void UpdateInertiaTensor2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern Vector3 GetCenterOfMassPosition2(IntPtr obj);
+
+    /*
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern Transform GetCenterOfMassTransform2(IntPtr obj);
+     */
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern Vector3 GetLinearVelocity2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern Vector3 GetAngularVelocity2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetLinearVelocity2(IntPtr obj, Vector3 val);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetAngularVelocity2(IntPtr obj, Vector3 angularVelocity);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern Vector3 GetVelocityInLocalPoint2(IntPtr obj, Vector3 pos);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void Translate2(IntPtr obj, Vector3 trans);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void UpdateDeactivation2(IntPtr obj, float timeStep);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool WantsSleeping2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetAngularFactor2(IntPtr obj, float factor);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetAngularFactorV2(IntPtr obj, Vector3 factor);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern Vector3 GetAngularFactor2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool IsInWorld2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void AddConstraintRef2(IntPtr obj, IntPtr constrain);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void RemoveConstraintRef2(IntPtr obj, IntPtr constrain);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr GetConstraintRef2(IntPtr obj, int index);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern int GetNumConstraintRefs2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool SetCollisionGroupMask2(IntPtr body, uint filter, uint mask);
+
+// =====================================================================================
+// btCollisionShape entries
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern float GetAngularMotionDisc2(IntPtr shape);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern float GetContactBreakingThreshold2(IntPtr shape, float defaultFactor);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool IsPolyhedral2(IntPtr shape);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool IsConvex2d2(IntPtr shape);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool IsConvex2(IntPtr shape);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool IsNonMoving2(IntPtr shape);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool IsConcave2(IntPtr shape);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool IsCompound2(IntPtr shape);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool IsSoftBody2(IntPtr shape);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool IsInfinite2(IntPtr shape);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetLocalScaling2(IntPtr shape, Vector3 scale);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern Vector3 GetLocalScaling2(IntPtr shape);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern Vector3 CalculateLocalInertia2(IntPtr shape, float mass);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern int GetShapeType2(IntPtr shape);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetMargin2(IntPtr shape, float val);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern float GetMargin2(IntPtr shape);
+
+// =====================================================================================
+// Debugging
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void DumpRigidBody2(IntPtr sim, IntPtr collisionObject);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void DumpCollisionShape2(IntPtr sim, IntPtr collisionShape);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void DumpMapInfo2(IntPtr sim, IntPtr manInfo);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void DumpConstraint2(IntPtr sim, IntPtr constrain);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void DumpActivationInfo2(IntPtr sim);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void DumpAllInfo2(IntPtr sim);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void DumpPhysicsStatistics2(IntPtr sim);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void ResetBroadphasePool(IntPtr sim);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void ResetConstraintSolver(IntPtr sim);
+
+}
+
+}
+
+}
diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSAPIXNA.cs b/OpenSim/Region/Physics/BulletSPlugin/BSAPIXNA.cs
new file mode 100755
index 0000000..0c7f315
--- /dev/null
+++ b/OpenSim/Region/Physics/BulletSPlugin/BSAPIXNA.cs
@@ -0,0 +1,1597 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyrightD
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+using System;
+using System.Collections.Generic;
+using System.IO;
+using System.Text;
+
+using OpenSim.Framework;
+
+using OpenMetaverse;
+
+using BulletXNA;
+using BulletXNA.LinearMath;
+using BulletXNA.BulletCollision;
+using BulletXNA.BulletDynamics;
+using BulletXNA.BulletCollision.CollisionDispatch;
+
+namespace OpenSim.Region.Physics.BulletSPlugin
+{
+public sealed class BSAPIXNA : BSAPITemplate
+{
+private sealed class BulletWorldXNA : BulletWorld
+{
+    public DiscreteDynamicsWorld world;
+    public BulletWorldXNA(uint id, BSScene physScene, DiscreteDynamicsWorld xx)
+        : base(id, physScene)
+    {
+        world = xx;
+    }
+}
+
+private sealed class BulletBodyXNA : BulletBody
+{
+    public CollisionObject body;
+    public RigidBody rigidBody { get { return RigidBody.Upcast(body); } }
+
+    public BulletBodyXNA(uint id, CollisionObject xx)
+        : base(id)
+    {
+        body = xx;
+    }
+    public override bool HasPhysicalBody
+    {
+        get { return body != null; }
+    }
+    public override void Clear()
+    {
+        body = null;
+    }
+    public override string AddrString
+    {
+        get { return "XNARigidBody"; }
+    }
+}
+
+private sealed class BulletShapeXNA : BulletShape
+{
+    public CollisionShape shape;
+    public BulletShapeXNA(CollisionShape xx, BSPhysicsShapeType typ) 
+        : base()
+    {
+        shape = xx;
+        type = typ;
+    }
+    public override bool HasPhysicalShape
+    {
+        get { return shape != null; }
+    }
+    public override void Clear()
+    {
+        shape = null;
+    }
+    public override BulletShape Clone()
+    {
+        return new BulletShapeXNA(shape, type);
+    }
+    public override bool ReferenceSame(BulletShape other)
+    {
+        BulletShapeXNA otheru = other as BulletShapeXNA;
+        return (otheru != null) && (this.shape == otheru.shape);
+
+    }
+    public override string AddrString
+    {
+        get { return "XNACollisionShape"; }
+    }
+}
+private sealed class BulletConstraintXNA : BulletConstraint
+{
+    public TypedConstraint constrain;
+    public BulletConstraintXNA(TypedConstraint xx) : base()
+    {
+        constrain = xx;
+    }
+
+    public override void Clear()
+    {
+        constrain = null;
+    }
+    public override bool HasPhysicalConstraint { get { return constrain != null; } }
+
+    // Used for log messages for a unique display of the memory/object allocated to this instance
+    public override string AddrString
+    {
+        get { return "XNAConstraint"; }
+    }
+}
+
+    private static int m_collisionsThisFrame;
+    private BSScene PhysicsScene { get; set; }
+
+    public override string BulletEngineName { get { return "BulletXNA"; } }
+    public override string BulletEngineVersion { get; protected set; }
+
+    public BSAPIXNA(string paramName, BSScene physScene)
+    {
+        PhysicsScene = physScene;
+    }
+
+    /// <summary>
+    /// 
+    /// </summary>
+    /// <param name="p"></param>
+    /// <param name="p_2"></param>
+    public override bool RemoveObjectFromWorld(BulletWorld pWorld, BulletBody pBody)
+    {
+        DiscreteDynamicsWorld world = ((BulletWorldXNA)pWorld).world;
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        world.RemoveRigidBody(body);
+        return true;
+    }
+
+    public override bool AddConstraintToWorld(BulletWorld world, BulletConstraint constrain, bool disableCollisionsBetweenLinkedObjects)
+    {
+        /* TODO */
+        return false;
+    }
+
+    public override bool RemoveConstraintFromWorld(BulletWorld world, BulletConstraint constrain)
+    {
+        /* TODO */
+        return false;
+    }
+
+    public override void SetRestitution(BulletBody pBody, float pRestitution)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        body.SetRestitution(pRestitution);
+    }
+
+    public override int GetShapeType(BulletShape pShape)
+    {
+        CollisionShape shape = ((BulletShapeXNA)pShape).shape;
+        return (int)shape.GetShapeType();
+    }
+    public override void SetMargin(BulletShape pShape, float pMargin)
+    {
+        CollisionShape shape = ((BulletShapeXNA)pShape).shape;
+        shape.SetMargin(pMargin);
+    }
+
+    public override float GetMargin(BulletShape pShape)
+    {
+        CollisionShape shape = ((BulletShapeXNA)pShape).shape;
+        return shape.GetMargin();
+    }
+
+    public override void SetLocalScaling(BulletShape pShape, Vector3 pScale)
+    {
+        CollisionShape shape = ((BulletShapeXNA)pShape).shape;
+        IndexedVector3 vec = new IndexedVector3(pScale.X, pScale.Y, pScale.Z);
+        shape.SetLocalScaling(ref vec);
+
+    }
+
+    public override void SetContactProcessingThreshold(BulletBody pBody, float contactprocessingthreshold)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        body.SetContactProcessingThreshold(contactprocessingthreshold);
+    }
+
+    public override void SetCcdMotionThreshold(BulletBody pBody, float pccdMotionThreashold)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        body.SetCcdMotionThreshold(pccdMotionThreashold);
+    }
+
+    public override void SetCcdSweptSphereRadius(BulletBody pBody, float pCcdSweptSphereRadius)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        body.SetCcdSweptSphereRadius(pCcdSweptSphereRadius);
+    }
+
+    public override void SetAngularFactorV(BulletBody pBody, Vector3 pAngularFactor)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        body.SetAngularFactor(new IndexedVector3(pAngularFactor.X, pAngularFactor.Y, pAngularFactor.Z));
+    }
+
+    public override CollisionFlags AddToCollisionFlags(BulletBody pBody, CollisionFlags pcollisionFlags)
+    {
+        CollisionObject body = ((BulletBodyXNA)pBody).body;
+        CollisionFlags existingcollisionFlags = (CollisionFlags)(uint)body.GetCollisionFlags();
+        existingcollisionFlags |= pcollisionFlags;
+        body.SetCollisionFlags((BulletXNA.BulletCollision.CollisionFlags)(uint)existingcollisionFlags);
+        return (CollisionFlags) (uint) existingcollisionFlags;
+    }
+
+    public override bool AddObjectToWorld(BulletWorld pWorld, BulletBody pBody)
+    {
+        DiscreteDynamicsWorld world = ((BulletWorldXNA)pWorld).world;
+        CollisionObject cbody = ((BulletBodyXNA)pBody).body;
+        RigidBody rbody = cbody as RigidBody;
+
+        // Bullet resets several variables when an object is added to the world. In particular,
+        //   BulletXNA resets position and rotation. Gravity is also reset depending on the static/dynamic
+        //   type. Of course, the collision flags in the broadphase proxy are initialized to default.
+        IndexedMatrix origPos = cbody.GetWorldTransform();
+        if (rbody != null)
+        {
+            IndexedVector3 origGrav = rbody.GetGravity();
+            world.AddRigidBody(rbody);
+            rbody.SetGravity(origGrav);
+        }
+        else
+        {
+            world.AddCollisionObject(rbody);
+        }
+        cbody.SetWorldTransform(origPos);
+
+        pBody.ApplyCollisionMask(pWorld.physicsScene);
+
+        //if (body.GetBroadphaseHandle() != null)
+        //    world.UpdateSingleAabb(body);
+        return true;
+    }
+
+    public override void ForceActivationState(BulletBody pBody, ActivationState pActivationState)
+    {
+        CollisionObject body = ((BulletBodyXNA)pBody).body;
+        body.ForceActivationState((BulletXNA.BulletCollision.ActivationState)(uint)pActivationState);
+    }
+
+    public override void UpdateSingleAabb(BulletWorld pWorld, BulletBody pBody)
+    {
+        DiscreteDynamicsWorld world = ((BulletWorldXNA)pWorld).world;
+        CollisionObject body = ((BulletBodyXNA)pBody).body;
+        world.UpdateSingleAabb(body);
+    }
+
+    public override void UpdateAabbs(BulletWorld world) { /* TODO */ }
+    public override bool GetForceUpdateAllAabbs(BulletWorld world) { /* TODO */ return false;  }
+    public override void SetForceUpdateAllAabbs(BulletWorld world, bool force) { /* TODO */ }
+
+    public override bool SetCollisionGroupMask(BulletBody pBody, uint pGroup, uint pMask)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        body.GetBroadphaseHandle().m_collisionFilterGroup = (BulletXNA.BulletCollision.CollisionFilterGroups) pGroup;
+        body.GetBroadphaseHandle().m_collisionFilterGroup = (BulletXNA.BulletCollision.CollisionFilterGroups) pGroup;
+        if ((uint) body.GetBroadphaseHandle().m_collisionFilterGroup == 0)
+            return false;
+        return true;
+    }
+
+    public override void ClearAllForces(BulletBody pBody)
+    {
+        CollisionObject body = ((BulletBodyXNA)pBody).body;
+        IndexedVector3 zeroVector = new IndexedVector3(0, 0, 0);
+        body.SetInterpolationLinearVelocity(ref zeroVector);
+        body.SetInterpolationAngularVelocity(ref zeroVector);
+        IndexedMatrix bodytransform = body.GetWorldTransform();
+
+        body.SetInterpolationWorldTransform(ref bodytransform);
+
+        if (body is RigidBody)
+        {
+            RigidBody rigidbody = body as RigidBody;
+            rigidbody.SetLinearVelocity(zeroVector);
+            rigidbody.SetAngularVelocity(zeroVector);
+            rigidbody.ClearForces();
+        }
+    }
+
+    public override void SetInterpolationAngularVelocity(BulletBody pBody, Vector3 pVector3)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        IndexedVector3 vec = new IndexedVector3(pVector3.X, pVector3.Y, pVector3.Z);
+        body.SetInterpolationAngularVelocity(ref vec);
+    }
+
+    public override void SetAngularVelocity(BulletBody pBody, Vector3 pVector3)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        IndexedVector3 vec = new IndexedVector3(pVector3.X, pVector3.Y, pVector3.Z);
+        body.SetAngularVelocity(ref vec);
+    }
+    public override Vector3 GetTotalForce(BulletBody pBody)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        IndexedVector3 iv3 = body.GetTotalForce();
+        return new Vector3(iv3.X, iv3.Y, iv3.Z);
+    }
+    public override Vector3 GetTotalTorque(BulletBody pBody)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        IndexedVector3 iv3 = body.GetTotalTorque();
+        return new Vector3(iv3.X, iv3.Y, iv3.Z);
+    }
+    public override Vector3 GetInvInertiaDiagLocal(BulletBody pBody)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        IndexedVector3 iv3 = body.GetInvInertiaDiagLocal();
+        return new Vector3(iv3.X, iv3.Y, iv3.Z);
+    }
+    public override void SetInvInertiaDiagLocal(BulletBody pBody, Vector3 inert)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        IndexedVector3 iv3 = new IndexedVector3(inert.X, inert.Y, inert.Z);
+        body.SetInvInertiaDiagLocal(ref iv3);
+    }
+    public override void ApplyForce(BulletBody pBody, Vector3 force, Vector3 pos)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        IndexedVector3 forceiv3 = new IndexedVector3(force.X, force.Y, force.Z);
+        IndexedVector3 posiv3 = new IndexedVector3(pos.X, pos.Y, pos.Z);
+        body.ApplyForce(ref forceiv3, ref posiv3);
+    }
+    public override void ApplyImpulse(BulletBody pBody, Vector3 imp, Vector3 pos)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        IndexedVector3 impiv3 = new IndexedVector3(imp.X, imp.Y, imp.Z);
+        IndexedVector3 posiv3 = new IndexedVector3(pos.X, pos.Y, pos.Z);
+        body.ApplyImpulse(ref impiv3, ref posiv3);
+    }
+
+    public override void ClearForces(BulletBody pBody)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        body.ClearForces();
+    }
+
+    public override void SetTranslation(BulletBody pBody, Vector3 _position, Quaternion _orientation)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        IndexedVector3 vposition = new IndexedVector3(_position.X, _position.Y, _position.Z);
+        IndexedQuaternion vquaternion = new IndexedQuaternion(_orientation.X, _orientation.Y, _orientation.Z,
+                                                              _orientation.W);
+        IndexedMatrix mat = IndexedMatrix.CreateFromQuaternion(vquaternion);
+        mat._origin = vposition;
+        body.SetWorldTransform(mat);
+        
+    }
+
+    public override Vector3 GetPosition(BulletBody pBody)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        IndexedVector3 pos = body.GetInterpolationWorldTransform()._origin;
+        return new Vector3(pos.X, pos.Y, pos.Z);
+    }
+
+    public override Vector3 CalculateLocalInertia(BulletShape pShape, float pphysMass)
+    {
+        CollisionShape shape = ((BulletShapeXNA)pShape).shape;
+        IndexedVector3 inertia = IndexedVector3.Zero;
+        shape.CalculateLocalInertia(pphysMass, out inertia);
+        return new Vector3(inertia.X, inertia.Y, inertia.Z);
+    }
+
+    public override void SetMassProps(BulletBody pBody, float pphysMass, Vector3 plocalInertia)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        IndexedVector3 inertia = new IndexedVector3(plocalInertia.X, plocalInertia.Y, plocalInertia.Z);
+        body.SetMassProps(pphysMass, inertia);
+    }
+
+
+    public override void SetObjectForce(BulletBody pBody, Vector3 _force)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        IndexedVector3 force = new IndexedVector3(_force.X, _force.Y, _force.Z);
+        body.SetTotalForce(ref force);
+    }
+
+    public override void SetFriction(BulletBody pBody, float _currentFriction)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        body.SetFriction(_currentFriction);
+    }
+
+    public override void SetLinearVelocity(BulletBody pBody, Vector3 _velocity)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        IndexedVector3 velocity = new IndexedVector3(_velocity.X, _velocity.Y, _velocity.Z);
+        body.SetLinearVelocity(velocity);
+    }
+
+    public override void Activate(BulletBody pBody, bool pforceactivation)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        body.Activate(pforceactivation);
+        
+    }
+
+    public override Quaternion GetOrientation(BulletBody pBody)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        IndexedQuaternion mat = body.GetInterpolationWorldTransform().GetRotation();
+        return new Quaternion(mat.X, mat.Y, mat.Z, mat.W);
+    }
+
+    public override CollisionFlags RemoveFromCollisionFlags(BulletBody pBody, CollisionFlags pcollisionFlags)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        CollisionFlags existingcollisionFlags = (CollisionFlags)(uint)body.GetCollisionFlags();
+        existingcollisionFlags &= ~pcollisionFlags;
+        body.SetCollisionFlags((BulletXNA.BulletCollision.CollisionFlags)(uint)existingcollisionFlags);
+        return (CollisionFlags)(uint)existingcollisionFlags;
+    }
+
+    public override float GetCcdMotionThreshold(BulletBody obj) { /* TODO */ return 0f;  }
+
+    public override float GetCcdSweptSphereRadius(BulletBody obj) { /* TODO */ return 0f;  }
+
+    public override IntPtr GetUserPointer(BulletBody obj) { /* TODO */ return IntPtr.Zero;  }
+
+    public override void SetUserPointer(BulletBody obj, IntPtr val) { /* TODO */ }
+
+    public override void SetGravity(BulletBody pBody, Vector3 pGravity)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        IndexedVector3 gravity = new IndexedVector3(pGravity.X, pGravity.Y, pGravity.Z);
+        body.SetGravity(gravity);
+    }
+
+    public override bool DestroyConstraint(BulletWorld pWorld, BulletConstraint pConstraint)
+    {
+        DiscreteDynamicsWorld world = ((BulletWorldXNA)pWorld).world;
+        TypedConstraint constraint = ((BulletConstraintXNA)pConstraint).constrain;
+        world.RemoveConstraint(constraint);
+        return true;
+    }
+
+    public override bool SetLinearLimits(BulletConstraint pConstraint, Vector3 low, Vector3 high)
+    {
+        Generic6DofConstraint constraint = ((BulletConstraintXNA)pConstraint).constrain as Generic6DofConstraint;
+        IndexedVector3 lowlimit = new IndexedVector3(low.X, low.Y, low.Z);
+        IndexedVector3 highlimit = new IndexedVector3(high.X, high.Y, high.Z);
+        constraint.SetLinearLowerLimit(lowlimit);
+        constraint.SetLinearUpperLimit(highlimit);
+        return true;
+    }
+
+    public override bool SetAngularLimits(BulletConstraint pConstraint, Vector3 low, Vector3 high)
+    {
+        Generic6DofConstraint constraint = ((BulletConstraintXNA)pConstraint).constrain as Generic6DofConstraint;
+        IndexedVector3 lowlimit = new IndexedVector3(low.X, low.Y, low.Z);
+        IndexedVector3 highlimit = new IndexedVector3(high.X, high.Y, high.Z);
+        constraint.SetAngularLowerLimit(lowlimit);
+        constraint.SetAngularUpperLimit(highlimit);
+        return true;
+    }
+
+    public override void SetConstraintNumSolverIterations(BulletConstraint pConstraint, float cnt)
+    {
+        Generic6DofConstraint constraint = ((BulletConstraintXNA)pConstraint).constrain as Generic6DofConstraint;
+        constraint.SetOverrideNumSolverIterations((int)cnt);
+    }
+
+    public override bool CalculateTransforms(BulletConstraint pConstraint)
+    {
+        Generic6DofConstraint constraint = ((BulletConstraintXNA)pConstraint).constrain as Generic6DofConstraint;
+        constraint.CalculateTransforms();
+        return true;
+    }
+
+    public override void SetConstraintEnable(BulletConstraint pConstraint, float p_2)
+    {
+        Generic6DofConstraint constraint = ((BulletConstraintXNA)pConstraint).constrain as Generic6DofConstraint;
+        constraint.SetEnabled((p_2 == 0) ? false : true);
+    }
+
+
+    //BulletSimAPI.Create6DofConstraint(m_world.ptr, m_body1.ptr, m_body2.ptr,frame1, frame1rot,frame2, frame2rot,useLinearReferenceFrameA, disableCollisionsBetweenLinkedBodies));
+    public override BulletConstraint Create6DofConstraint(BulletWorld pWorld, BulletBody pBody1, BulletBody pBody2, Vector3 pframe1, Quaternion pframe1rot, Vector3 pframe2, Quaternion pframe2rot, bool puseLinearReferenceFrameA, bool pdisableCollisionsBetweenLinkedBodies)
+
+    {
+        DiscreteDynamicsWorld world = ((BulletWorldXNA)pWorld).world;
+        RigidBody body1 = ((BulletBodyXNA)pBody1).rigidBody;
+        RigidBody body2 = ((BulletBodyXNA)pBody2).rigidBody;
+        IndexedVector3 frame1v = new IndexedVector3(pframe1.X, pframe1.Y, pframe1.Z);
+        IndexedQuaternion frame1rot = new IndexedQuaternion(pframe1rot.X, pframe1rot.Y, pframe1rot.Z, pframe1rot.W);
+        IndexedMatrix frame1 = IndexedMatrix.CreateFromQuaternion(frame1rot);
+        frame1._origin = frame1v;
+
+        IndexedVector3 frame2v = new IndexedVector3(pframe2.X, pframe2.Y, pframe2.Z);
+        IndexedQuaternion frame2rot = new IndexedQuaternion(pframe2rot.X, pframe2rot.Y, pframe2rot.Z, pframe2rot.W);
+        IndexedMatrix frame2 = IndexedMatrix.CreateFromQuaternion(frame2rot);
+        frame2._origin = frame1v;
+
+        Generic6DofConstraint consttr = new Generic6DofConstraint(body1, body2, ref frame1, ref frame2,
+                                                                  puseLinearReferenceFrameA);
+        consttr.CalculateTransforms();
+        world.AddConstraint(consttr,pdisableCollisionsBetweenLinkedBodies);
+
+        return new BulletConstraintXNA(consttr);
+    }
+
+    
+    /// <summary>
+    /// 
+    /// </summary>
+    /// <param name="pWorld"></param>
+    /// <param name="pBody1"></param>
+    /// <param name="pBody2"></param>
+    /// <param name="pjoinPoint"></param>
+    /// <param name="puseLinearReferenceFrameA"></param>
+    /// <param name="pdisableCollisionsBetweenLinkedBodies"></param>
+    /// <returns></returns>
+    public override BulletConstraint Create6DofConstraintToPoint(BulletWorld pWorld, BulletBody pBody1, BulletBody pBody2, Vector3 pjoinPoint, bool puseLinearReferenceFrameA, bool pdisableCollisionsBetweenLinkedBodies)
+    {
+        DiscreteDynamicsWorld world = ((BulletWorldXNA)pWorld).world;
+        RigidBody body1 = ((BulletBodyXNA)pBody1).rigidBody;
+        RigidBody body2 = ((BulletBodyXNA)pBody2).rigidBody;
+        IndexedMatrix frame1 = new IndexedMatrix(IndexedBasisMatrix.Identity, new IndexedVector3(0, 0, 0));
+        IndexedMatrix frame2 = new IndexedMatrix(IndexedBasisMatrix.Identity, new IndexedVector3(0, 0, 0));
+
+        IndexedVector3 joinPoint = new IndexedVector3(pjoinPoint.X, pjoinPoint.Y, pjoinPoint.Z);
+        IndexedMatrix mat = IndexedMatrix.Identity;
+        mat._origin = new IndexedVector3(pjoinPoint.X, pjoinPoint.Y, pjoinPoint.Z);
+        frame1._origin = body1.GetWorldTransform().Inverse()*joinPoint;
+        frame2._origin = body2.GetWorldTransform().Inverse()*joinPoint;
+
+        Generic6DofConstraint consttr = new Generic6DofConstraint(body1, body2, ref frame1, ref frame2, puseLinearReferenceFrameA);
+        consttr.CalculateTransforms();
+        world.AddConstraint(consttr, pdisableCollisionsBetweenLinkedBodies);
+
+        return new BulletConstraintXNA(consttr);
+    }
+    //SetFrames(m_constraint.ptr, frameA, frameArot, frameB, frameBrot);
+    public override bool SetFrames(BulletConstraint pConstraint, Vector3 pframe1, Quaternion pframe1rot, Vector3 pframe2, Quaternion pframe2rot)
+    {
+        Generic6DofConstraint constraint = ((BulletConstraintXNA)pConstraint).constrain as Generic6DofConstraint;
+        IndexedVector3 frame1v = new IndexedVector3(pframe1.X, pframe1.Y, pframe1.Z);
+        IndexedQuaternion frame1rot = new IndexedQuaternion(pframe1rot.X, pframe1rot.Y, pframe1rot.Z, pframe1rot.W);
+        IndexedMatrix frame1 = IndexedMatrix.CreateFromQuaternion(frame1rot);
+        frame1._origin = frame1v;
+
+        IndexedVector3 frame2v = new IndexedVector3(pframe2.X, pframe2.Y, pframe2.Z);
+        IndexedQuaternion frame2rot = new IndexedQuaternion(pframe2rot.X, pframe2rot.Y, pframe2rot.Z, pframe2rot.W);
+        IndexedMatrix frame2 = IndexedMatrix.CreateFromQuaternion(frame2rot);
+        frame2._origin = frame1v;
+        constraint.SetFrames(ref frame1, ref frame2);
+        return true;
+    }
+
+    public override Vector3 GetLinearVelocity(BulletBody pBody)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        IndexedVector3 iv3 = body.GetLinearVelocity();
+        return new Vector3(iv3.X, iv3.Y, iv3.Z);
+    }
+    public override Vector3 GetAngularVelocity(BulletBody pBody)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        IndexedVector3 iv3 = body.GetAngularVelocity();
+        return new Vector3(iv3.X, iv3.Y, iv3.Z);
+    }
+    public override Vector3 GetVelocityInLocalPoint(BulletBody pBody, Vector3 pos)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        IndexedVector3 posiv3 = new IndexedVector3(pos.X, pos.Y, pos.Z);
+        IndexedVector3 iv3 = body.GetVelocityInLocalPoint(ref posiv3);
+        return new Vector3(iv3.X, iv3.Y, iv3.Z);
+    }
+    public override void Translate(BulletBody pBody, Vector3 trans)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+    }
+    public override void UpdateDeactivation(BulletBody pBody, float timeStep)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        body.UpdateDeactivation(timeStep);
+    }
+
+    public override bool WantsSleeping(BulletBody pBody)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        return body.WantsSleeping();
+    }
+
+    public override void SetAngularFactor(BulletBody pBody, float factor)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        body.SetAngularFactor(factor);
+    }
+
+    public override Vector3 GetAngularFactor(BulletBody pBody)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        IndexedVector3 iv3 =  body.GetAngularFactor();
+        return new Vector3(iv3.X, iv3.Y, iv3.Z);
+    }
+
+    public override bool IsInWorld(BulletWorld pWorld, BulletBody pBody)
+    {
+        DiscreteDynamicsWorld world = ((BulletWorldXNA)pWorld).world;
+        CollisionObject body = ((BulletBodyXNA)pBody).body;
+        return world.IsInWorld(body);
+    }
+
+    public override void AddConstraintRef(BulletBody pBody, BulletConstraint pConstrain)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        TypedConstraint constrain = ((BulletConstraintXNA)pConstrain).constrain;
+        body.AddConstraintRef(constrain);
+    }
+
+    public override void RemoveConstraintRef(BulletBody pBody, BulletConstraint pConstrain)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        TypedConstraint constrain = ((BulletConstraintXNA)pConstrain).constrain;
+        body.RemoveConstraintRef(constrain);
+    }
+
+    public override BulletConstraint GetConstraintRef(BulletBody pBody, int index)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        return new BulletConstraintXNA(body.GetConstraintRef(index));
+    }
+
+    public override int GetNumConstraintRefs(BulletBody pBody)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        return body.GetNumConstraintRefs();
+    }
+
+    public override void SetInterpolationLinearVelocity(BulletBody pBody, Vector3 VehicleVelocity)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        IndexedVector3 velocity = new IndexedVector3(VehicleVelocity.X, VehicleVelocity.Y, VehicleVelocity.Z);
+        body.SetInterpolationLinearVelocity(ref velocity);
+    }
+
+    public override bool UseFrameOffset(BulletConstraint pConstraint, float onOff)
+    {
+        Generic6DofConstraint constraint = ((BulletConstraintXNA)pConstraint).constrain as Generic6DofConstraint;
+        constraint.SetUseFrameOffset((onOff == 0) ? false : true);
+        return true;
+    }
+    //SetBreakingImpulseThreshold(m_constraint.ptr, threshold);
+    public override bool SetBreakingImpulseThreshold(BulletConstraint pConstraint, float threshold)
+    {
+        Generic6DofConstraint constraint = ((BulletConstraintXNA)pConstraint).constrain as Generic6DofConstraint;
+        constraint.SetBreakingImpulseThreshold(threshold);
+        return true;
+    }
+    //BulletSimAPI.SetAngularDamping(Prim.PhysBody.ptr, angularDamping);
+    public override void SetAngularDamping(BulletBody pBody, float angularDamping)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        float lineardamping = body.GetLinearDamping();
+        body.SetDamping(lineardamping, angularDamping);
+
+    }
+
+    public override void UpdateInertiaTensor(BulletBody pBody)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        body.UpdateInertiaTensor();
+    }
+
+    public override void RecalculateCompoundShapeLocalAabb(BulletShape pCompoundShape)
+    {
+        CompoundShape shape = ((BulletShapeXNA)pCompoundShape).shape as CompoundShape;
+        shape.RecalculateLocalAabb();
+    }
+
+    //BulletSimAPI.GetCollisionFlags(PhysBody.ptr)
+    public override CollisionFlags GetCollisionFlags(BulletBody pBody)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        uint flags = (uint)body.GetCollisionFlags();
+        return (CollisionFlags) flags;
+    }
+
+    public override void SetDamping(BulletBody pBody, float pLinear, float pAngular)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        body.SetDamping(pLinear, pAngular);
+    }
+    //PhysBody.ptr, PhysicsScene.Params.deactivationTime);
+    public override void SetDeactivationTime(BulletBody pBody, float pDeactivationTime)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        body.SetDeactivationTime(pDeactivationTime);
+    }
+    //SetSleepingThresholds(PhysBody.ptr, PhysicsScene.Params.linearSleepingThreshold, PhysicsScene.Params.angularSleepingThreshold);
+    public override void SetSleepingThresholds(BulletBody pBody, float plinearSleepingThreshold, float pangularSleepingThreshold)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        body.SetSleepingThresholds(plinearSleepingThreshold, pangularSleepingThreshold);
+    }
+
+    public override CollisionObjectTypes GetBodyType(BulletBody pBody)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        return (CollisionObjectTypes)(int) body.GetInternalType();
+    }
+
+    public override void ApplyGravity(BulletBody obj) { /* TODO */ }
+
+    public override Vector3 GetGravity(BulletBody obj) { /* TODO */ return Vector3.Zero;  }
+
+    public override void SetLinearDamping(BulletBody obj, float lin_damping) { /* TODO */ }
+
+    public override float GetLinearDamping(BulletBody obj) { /* TODO */ return 0f;  }
+
+    public override float GetAngularDamping(BulletBody obj) { /* TODO */ return 0f;  }
+
+    public override float GetLinearSleepingThreshold(BulletBody obj) { /* TODO */ return 0f;  }
+
+    public override void ApplyDamping(BulletBody obj, float timeStep) { /* TODO */ }
+
+    public override Vector3 GetLinearFactor(BulletBody obj) { /* TODO */ return Vector3.Zero; }
+
+    public override void SetLinearFactor(BulletBody obj, Vector3 factor) { /* TODO */ }
+
+    public override void SetCenterOfMassByPosRot(BulletBody obj, Vector3 pos, Quaternion rot) { /* TODO */ }
+
+    //BulletSimAPI.ApplyCentralForce(PhysBody.ptr, fSum);
+    public override void ApplyCentralForce(BulletBody pBody, Vector3 pfSum)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        IndexedVector3 fSum = new IndexedVector3(pfSum.X, pfSum.Y, pfSum.Z);
+        body.ApplyCentralForce(ref fSum);
+    }
+    public override void ApplyCentralImpulse(BulletBody pBody, Vector3 pfSum)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        IndexedVector3 fSum = new IndexedVector3(pfSum.X, pfSum.Y, pfSum.Z);
+        body.ApplyCentralImpulse(ref fSum);
+    }
+    public override void ApplyTorque(BulletBody pBody, Vector3 pfSum)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        IndexedVector3 fSum = new IndexedVector3(pfSum.X, pfSum.Y, pfSum.Z);
+        body.ApplyTorque(ref fSum);
+    }
+    public override void ApplyTorqueImpulse(BulletBody pBody, Vector3 pfSum)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        IndexedVector3 fSum = new IndexedVector3(pfSum.X, pfSum.Y, pfSum.Z);
+        body.ApplyTorqueImpulse(ref fSum);
+    }
+
+    public override void DestroyObject(BulletWorld p, BulletBody p_2)
+    {
+        //TODO:
+    }
+
+    public override void Shutdown(BulletWorld pWorld)
+    {
+        DiscreteDynamicsWorld world = ((BulletWorldXNA)pWorld).world;
+        world.Cleanup();
+    }
+
+    public override BulletShape DuplicateCollisionShape(BulletWorld sim, BulletShape srcShape, uint id)
+    {
+        return null;
+    }
+
+    public override bool DeleteCollisionShape(BulletWorld p, BulletShape p_2)
+    {
+        //TODO:
+        return false;
+    }
+    //(sim.ptr, shape.ptr, prim.LocalID, prim.RawPosition, prim.RawOrientation);
+               
+    public override BulletBody CreateBodyFromShape(BulletWorld pWorld, BulletShape pShape, uint pLocalID, Vector3 pRawPosition, Quaternion pRawOrientation)
+    {
+        CollisionWorld world = ((BulletWorldXNA)pWorld).world;
+        IndexedMatrix mat =
+            IndexedMatrix.CreateFromQuaternion(new IndexedQuaternion(pRawOrientation.X, pRawOrientation.Y,
+                                                                     pRawOrientation.Z, pRawOrientation.W));
+        mat._origin = new IndexedVector3(pRawPosition.X, pRawPosition.Y, pRawPosition.Z);
+        CollisionShape shape = ((BulletShapeXNA)pShape).shape;
+        //UpdateSingleAabb(world, shape);
+        // TODO: Feed Update array into null
+        RigidBody body = new RigidBody(0,new SimMotionState(world,pLocalID,mat,null),shape,IndexedVector3.Zero);
+        
+        body.SetUserPointer(pLocalID);
+        return new BulletBodyXNA(pLocalID, body);
+    }
+
+    
+    public override BulletBody CreateBodyWithDefaultMotionState( BulletShape pShape, uint pLocalID, Vector3 pRawPosition, Quaternion pRawOrientation)
+    {
+
+        IndexedMatrix mat =
+            IndexedMatrix.CreateFromQuaternion(new IndexedQuaternion(pRawOrientation.X, pRawOrientation.Y,
+                                                                     pRawOrientation.Z, pRawOrientation.W));
+        mat._origin = new IndexedVector3(pRawPosition.X, pRawPosition.Y, pRawPosition.Z);
+
+        CollisionShape shape = ((BulletShapeXNA)pShape).shape;
+
+        // TODO: Feed Update array into null
+        RigidBody body = new RigidBody(0, new DefaultMotionState( mat, IndexedMatrix.Identity), shape, IndexedVector3.Zero);
+        body.SetWorldTransform(mat);
+        body.SetUserPointer(pLocalID);
+        return new BulletBodyXNA(pLocalID, body);
+    }
+    //(m_mapInfo.terrainBody.ptr, CollisionFlags.CF_STATIC_OBJECT);
+    public override CollisionFlags SetCollisionFlags(BulletBody pBody, CollisionFlags collisionFlags)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        body.SetCollisionFlags((BulletXNA.BulletCollision.CollisionFlags) (uint) collisionFlags);
+        return (CollisionFlags)body.GetCollisionFlags();
+    }
+
+    public override Vector3 GetAnisotripicFriction(BulletConstraint pconstrain) { /* TODO */ return Vector3.Zero; }
+    public override Vector3 SetAnisotripicFriction(BulletConstraint pconstrain, Vector3 frict) { /* TODO */ return Vector3.Zero; }
+    public override bool HasAnisotripicFriction(BulletConstraint pconstrain) { /* TODO */ return false; }
+    public override float GetContactProcessingThreshold(BulletBody pBody) { /* TODO */ return 0f; }
+    public override bool IsStaticObject(BulletBody pBody) { /* TODO */ return false; }
+    public override bool IsKinematicObject(BulletBody pBody) { /* TODO */ return false; }
+    public override bool IsStaticOrKinematicObject(BulletBody pBody) { /* TODO */ return false; }
+    public override bool HasContactResponse(BulletBody pBody) { /* TODO */ return false; }
+    public override int GetActivationState(BulletBody pBody) { /* TODO */ return 0; }
+    public override void SetActivationState(BulletBody pBody, int state) { /* TODO */ }
+    public override float GetDeactivationTime(BulletBody pBody) { /* TODO */ return 0f; }
+    public override bool IsActive(BulletBody pBody) { /* TODO */ return false; }
+    public override float GetRestitution(BulletBody pBody) { /* TODO */ return 0f; }
+    public override float GetFriction(BulletBody pBody) { /* TODO */ return 0f; }
+    public override void SetInterpolationVelocity(BulletBody pBody, Vector3 linearVel, Vector3 angularVel) { /* TODO */ }
+    public override float GetHitFraction(BulletBody pBody) { /* TODO */ return 0f; }
+
+    //(m_mapInfo.terrainBody.ptr, PhysicsScene.Params.terrainHitFraction);
+    public override void SetHitFraction(BulletBody pBody, float pHitFraction)
+    {
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        body.SetHitFraction(pHitFraction);
+    }
+    //BuildCapsuleShape(physicsScene.World.ptr, 1f, 1f, prim.Scale);
+    public override BulletShape BuildCapsuleShape(BulletWorld pWorld, float pRadius, float pHeight, Vector3 pScale)
+    {
+        DiscreteDynamicsWorld world = ((BulletWorldXNA)pWorld).world;
+        IndexedVector3 scale = new IndexedVector3(pScale.X, pScale.Y, pScale.Z);
+        CapsuleShapeZ capsuleShapeZ = new CapsuleShapeZ(pRadius, pHeight);
+        capsuleShapeZ.SetMargin(world.WorldSettings.Params.collisionMargin);
+        capsuleShapeZ.SetLocalScaling(ref scale);
+
+        return new BulletShapeXNA(capsuleShapeZ, BSPhysicsShapeType.SHAPE_CAPSULE); ;
+    }
+
+    public override BulletWorld Initialize(Vector3 maxPosition, ConfigurationParameters parms,
+                                            int maxCollisions, ref CollisionDesc[] collisionArray,
+                                            int maxUpdates, ref EntityProperties[] updateArray
+                                            )
+    {
+        /* TODO */
+        return new BulletWorldXNA(1, null, null);
+    }
+
+    private static object Initialize2(Vector3 worldExtent, 
+                        ConfigurationParameters[] o,
+                        int mMaxCollisionsPerFrame, ref List<BulletXNA.CollisionDesc> collisionArray,
+                        int mMaxUpdatesPerFrame, ref List<BulletXNA.EntityProperties> updateArray, 
+                        object mDebugLogCallbackHandle)
+    {
+        CollisionWorld.WorldData.ParamData p = new CollisionWorld.WorldData.ParamData();
+
+        p.angularDamping = o[0].XangularDamping;
+        p.defaultFriction = o[0].defaultFriction;
+        p.defaultFriction = o[0].defaultFriction;
+        p.defaultDensity = o[0].defaultDensity;
+        p.defaultRestitution = o[0].defaultRestitution;
+        p.collisionMargin = o[0].collisionMargin;
+        p.gravity = o[0].gravity;
+
+        p.linearDamping = o[0].XlinearDamping;
+        p.angularDamping = o[0].XangularDamping;
+        p.deactivationTime = o[0].XdeactivationTime;
+        p.linearSleepingThreshold = o[0].XlinearSleepingThreshold;
+        p.angularSleepingThreshold = o[0].XangularSleepingThreshold;
+        p.ccdMotionThreshold = o[0].XccdMotionThreshold;
+        p.ccdSweptSphereRadius = o[0].XccdSweptSphereRadius;
+        p.contactProcessingThreshold = o[0].XcontactProcessingThreshold;
+
+        p.terrainImplementation = o[0].XterrainImplementation;
+        p.terrainFriction = o[0].XterrainFriction;
+
+        p.terrainHitFraction = o[0].XterrainHitFraction;
+        p.terrainRestitution = o[0].XterrainRestitution;
+        p.terrainCollisionMargin = o[0].XterrainCollisionMargin;
+
+        p.avatarFriction = o[0].XavatarFriction;
+        p.avatarStandingFriction = o[0].XavatarStandingFriction;
+        p.avatarDensity = o[0].XavatarDensity;
+        p.avatarRestitution = o[0].XavatarRestitution;
+        p.avatarCapsuleWidth = o[0].XavatarCapsuleWidth;
+        p.avatarCapsuleDepth = o[0].XavatarCapsuleDepth;
+        p.avatarCapsuleHeight = o[0].XavatarCapsuleHeight;
+        p.avatarContactProcessingThreshold = o[0].XavatarContactProcessingThreshold;
+       
+        p.vehicleAngularDamping = o[0].XvehicleAngularDamping;
+        
+        p.maxPersistantManifoldPoolSize = o[0].maxPersistantManifoldPoolSize;
+        p.maxCollisionAlgorithmPoolSize = o[0].maxCollisionAlgorithmPoolSize;
+        p.shouldDisableContactPoolDynamicAllocation = o[0].shouldDisableContactPoolDynamicAllocation;
+        p.shouldForceUpdateAllAabbs = o[0].shouldForceUpdateAllAabbs;
+        p.shouldRandomizeSolverOrder = o[0].shouldRandomizeSolverOrder;
+        p.shouldSplitSimulationIslands = o[0].shouldSplitSimulationIslands;
+        p.shouldEnableFrictionCaching = o[0].shouldEnableFrictionCaching;
+        p.numberOfSolverIterations = o[0].numberOfSolverIterations;
+
+        p.linksetImplementation = o[0].XlinksetImplementation;
+        p.linkConstraintUseFrameOffset = o[0].XlinkConstraintUseFrameOffset;
+        p.linkConstraintEnableTransMotor = o[0].XlinkConstraintEnableTransMotor;
+        p.linkConstraintTransMotorMaxVel = o[0].XlinkConstraintTransMotorMaxVel;
+        p.linkConstraintTransMotorMaxForce = o[0].XlinkConstraintTransMotorMaxForce;
+        p.linkConstraintERP = o[0].XlinkConstraintERP;
+        p.linkConstraintCFM = o[0].XlinkConstraintCFM;
+        p.linkConstraintSolverIterations = o[0].XlinkConstraintSolverIterations;
+        p.physicsLoggingFrames = o[0].XphysicsLoggingFrames;
+        DefaultCollisionConstructionInfo ccci = new DefaultCollisionConstructionInfo();
+        
+        DefaultCollisionConfiguration cci = new DefaultCollisionConfiguration();
+        CollisionDispatcher m_dispatcher = new CollisionDispatcher(cci);
+
+
+        if (p.maxPersistantManifoldPoolSize > 0)
+            cci.m_persistentManifoldPoolSize = (int)p.maxPersistantManifoldPoolSize;
+        if (p.shouldDisableContactPoolDynamicAllocation !=0)
+            m_dispatcher.SetDispatcherFlags(DispatcherFlags.CD_DISABLE_CONTACTPOOL_DYNAMIC_ALLOCATION);
+        //if (p.maxCollisionAlgorithmPoolSize >0 )
+
+        DbvtBroadphase m_broadphase = new DbvtBroadphase();
+        //IndexedVector3 aabbMin = new IndexedVector3(0, 0, 0);
+        //IndexedVector3 aabbMax = new IndexedVector3(256, 256, 256);
+
+        //AxisSweep3Internal m_broadphase2 = new AxisSweep3Internal(ref aabbMin, ref aabbMax, Convert.ToInt32(0xfffe), 0xffff, ushort.MaxValue/2, null, true);
+        m_broadphase.GetOverlappingPairCache().SetInternalGhostPairCallback(new GhostPairCallback());
+
+        SequentialImpulseConstraintSolver m_solver = new SequentialImpulseConstraintSolver();
+
+        DiscreteDynamicsWorld world = new DiscreteDynamicsWorld(m_dispatcher, m_broadphase, m_solver, cci);
+        world.UpdatedObjects = updateArray;
+        world.UpdatedCollisions = collisionArray;
+        world.WorldSettings.Params = p;
+        world.SetForceUpdateAllAabbs(p.shouldForceUpdateAllAabbs != 0);
+        world.GetSolverInfo().m_solverMode = SolverMode.SOLVER_USE_WARMSTARTING | SolverMode.SOLVER_SIMD;
+        if (p.shouldRandomizeSolverOrder != 0)
+            world.GetSolverInfo().m_solverMode |= SolverMode.SOLVER_RANDMIZE_ORDER;
+
+        world.GetSimulationIslandManager().SetSplitIslands(p.shouldSplitSimulationIslands != 0);
+        //world.GetDispatchInfo().m_enableSatConvex Not implemented in C# port
+
+        if (p.shouldEnableFrictionCaching != 0)
+            world.GetSolverInfo().m_solverMode |= SolverMode.SOLVER_ENABLE_FRICTION_DIRECTION_CACHING;
+
+        if (p.numberOfSolverIterations > 0)
+            world.GetSolverInfo().m_numIterations = (int) p.numberOfSolverIterations;
+
+
+        world.GetSolverInfo().m_damping = world.WorldSettings.Params.linearDamping;
+        world.GetSolverInfo().m_restitution = world.WorldSettings.Params.defaultRestitution;
+        world.GetSolverInfo().m_globalCfm = 0.0f;
+        world.GetSolverInfo().m_tau = 0.6f;
+        world.GetSolverInfo().m_friction = 0.3f;
+        world.GetSolverInfo().m_maxErrorReduction = 20f;
+        world.GetSolverInfo().m_numIterations = 10;
+        world.GetSolverInfo().m_erp = 0.2f;
+        world.GetSolverInfo().m_erp2 = 0.1f;
+        world.GetSolverInfo().m_sor = 1.0f;
+        world.GetSolverInfo().m_splitImpulse = false;
+        world.GetSolverInfo().m_splitImpulsePenetrationThreshold = -0.02f;
+        world.GetSolverInfo().m_linearSlop = 0.0f;
+        world.GetSolverInfo().m_warmstartingFactor = 0.85f;
+        world.GetSolverInfo().m_restingContactRestitutionThreshold = 2;
+        world.SetForceUpdateAllAabbs(true);
+
+
+        world.SetGravity(new IndexedVector3(0,0,p.gravity));
+
+        return world;
+    }
+    //m_constraint.ptr, ConstraintParams.BT_CONSTRAINT_STOP_CFM, cfm, ConstraintParamAxis.AXIS_ALL
+    public override bool SetConstraintParam(BulletConstraint pConstraint, ConstraintParams paramIndex, float paramvalue, ConstraintParamAxis axis)
+    {
+        Generic6DofConstraint constrain = ((BulletConstraintXNA)pConstraint).constrain as Generic6DofConstraint;
+        if (axis == ConstraintParamAxis.AXIS_LINEAR_ALL || axis == ConstraintParamAxis.AXIS_ALL)
+        {
+            constrain.SetParam((BulletXNA.BulletDynamics.ConstraintParams) (int) paramIndex, paramvalue, 0);
+            constrain.SetParam((BulletXNA.BulletDynamics.ConstraintParams) (int) paramIndex, paramvalue, 1);
+            constrain.SetParam((BulletXNA.BulletDynamics.ConstraintParams) (int) paramIndex, paramvalue, 2);
+        }
+        if (axis == ConstraintParamAxis.AXIS_ANGULAR_ALL || axis == ConstraintParamAxis.AXIS_ALL)
+        {
+            constrain.SetParam((BulletXNA.BulletDynamics.ConstraintParams)(int)paramIndex, paramvalue, 3);
+            constrain.SetParam((BulletXNA.BulletDynamics.ConstraintParams)(int)paramIndex, paramvalue, 4);
+            constrain.SetParam((BulletXNA.BulletDynamics.ConstraintParams)(int)paramIndex, paramvalue, 5);
+        }
+        if (axis == ConstraintParamAxis.AXIS_LINEAR_ALL)
+        {
+            constrain.SetParam((BulletXNA.BulletDynamics.ConstraintParams)(int)paramIndex, paramvalue, (int)axis);
+        }
+        return true;
+    }
+
+    public override bool PushUpdate(BulletBody pCollisionObject)
+    {
+        bool ret = false;
+        RigidBody rb = ((BulletBodyXNA)pCollisionObject).rigidBody;
+        if (rb != null)
+        {
+            SimMotionState sms = rb.GetMotionState() as SimMotionState;
+            if (sms != null)
+            {
+                IndexedMatrix wt = IndexedMatrix.Identity;
+                sms.GetWorldTransform(out wt);
+                sms.SetWorldTransform(ref wt, true);
+                ret = true;
+            }
+        }
+        return ret;
+        
+    }
+
+    public override float GetAngularMotionDisc(BulletShape pShape)
+    {
+        CollisionShape shape = ((BulletShapeXNA)pShape).shape;
+        return shape.GetAngularMotionDisc();
+    }
+    public override float GetContactBreakingThreshold(BulletShape pShape, float defaultFactor)
+    {
+        CollisionShape shape = ((BulletShapeXNA)pShape).shape;
+        return shape.GetContactBreakingThreshold(defaultFactor);
+    }
+    public override bool IsCompound(BulletShape pShape)
+    {
+        CollisionShape shape = ((BulletShapeXNA)pShape).shape;
+        return shape.IsCompound();
+    }
+    public override bool IsSoftBody(BulletShape pShape)
+    {
+        CollisionShape shape = ((BulletShapeXNA)pShape).shape;
+        return shape.IsSoftBody();
+    }
+    public override bool IsPolyhedral(BulletShape pShape)
+    {
+        CollisionShape shape = ((BulletShapeXNA)pShape).shape;
+        return shape.IsPolyhedral();
+    }
+    public override bool IsConvex2d(BulletShape pShape)
+    {
+        CollisionShape shape = ((BulletShapeXNA)pShape).shape;
+        return shape.IsConvex2d();
+    }
+    public override bool IsConvex(BulletShape pShape)
+    {
+        CollisionShape shape = ((BulletShapeXNA)pShape).shape;
+        return shape.IsConvex();
+    }
+    public override bool IsNonMoving(BulletShape pShape)
+    {
+        CollisionShape shape = ((BulletShapeXNA)pShape).shape;
+        return shape.IsNonMoving();
+    }
+    public override bool IsConcave(BulletShape pShape)
+    {
+        CollisionShape shape = ((BulletShapeXNA)pShape).shape;
+        return shape.IsConcave();
+    }
+    public override bool IsInfinite(BulletShape pShape)
+    {
+        CollisionShape shape = ((BulletShapeXNA)pShape).shape;
+        return shape.IsInfinite();
+    }
+    public override bool IsNativeShape(BulletShape pShape)
+    {
+        CollisionShape shape = ((BulletShapeXNA)pShape).shape;
+        bool ret;
+        switch (shape.GetShapeType())
+        {
+            case BroadphaseNativeTypes.BOX_SHAPE_PROXYTYPE:
+                case BroadphaseNativeTypes.CONE_SHAPE_PROXYTYPE:
+                case BroadphaseNativeTypes.SPHERE_SHAPE_PROXYTYPE:
+                case BroadphaseNativeTypes.CYLINDER_SHAPE_PROXYTYPE:
+                ret = true;
+                break;
+            default:
+                ret = false;
+                break;
+        }
+        return ret;
+    }
+
+    public override void SetShapeCollisionMargin(BulletShape shape, float margin) { /* TODO */ }
+
+    //sim.ptr, shape.ptr,prim.LocalID, prim.RawPosition, prim.RawOrientation
+    public override BulletBody CreateGhostFromShape(BulletWorld pWorld, BulletShape pShape, uint pLocalID, Vector3 pRawPosition, Quaternion pRawOrientation)
+    {
+        DiscreteDynamicsWorld world = ((BulletWorldXNA)pWorld).world;
+        IndexedMatrix bodyTransform = new IndexedMatrix();
+        bodyTransform._origin = new IndexedVector3(pRawPosition.X, pRawPosition.Y, pRawPosition.Z);
+        bodyTransform.SetRotation(new IndexedQuaternion(pRawOrientation.X,pRawOrientation.Y,pRawOrientation.Z,pRawOrientation.W));
+        GhostObject gObj = new PairCachingGhostObject();
+        gObj.SetWorldTransform(bodyTransform);
+        CollisionShape shape = ((BulletShapeXNA)pShape).shape;
+        gObj.SetCollisionShape(shape);
+        gObj.SetUserPointer(pLocalID);
+        // TODO: Add to Special CollisionObjects!
+        return new BulletBodyXNA(pLocalID, gObj);
+    }
+
+    public override void SetCollisionShape(BulletWorld pWorld, BulletBody pObj, BulletShape pShape)
+    {
+        DiscreteDynamicsWorld world = ((BulletWorldXNA)pWorld).world;
+        CollisionObject obj = ((BulletBodyXNA)pObj).body;
+        CollisionShape shape = ((BulletShapeXNA)pShape).shape;
+        obj.SetCollisionShape(shape);
+
+    }
+    public override BulletShape GetCollisionShape(BulletBody obj) { /* TODO */ return null; }
+
+    //(PhysicsScene.World.ptr, nativeShapeData)
+    public override BulletShape BuildNativeShape(BulletWorld pWorld, ShapeData pShapeData)
+    {
+        DiscreteDynamicsWorld world = ((BulletWorldXNA)pWorld).world;
+        CollisionShape shape = null;
+        switch (pShapeData.Type)
+        {
+            case BSPhysicsShapeType.SHAPE_BOX:
+                shape = new BoxShape(new IndexedVector3(0.5f,0.5f,0.5f));
+                break;
+            case BSPhysicsShapeType.SHAPE_CONE:
+                shape = new ConeShapeZ(0.5f, 1.0f);
+                break;
+            case BSPhysicsShapeType.SHAPE_CYLINDER:
+                shape = new CylinderShapeZ(new IndexedVector3(0.5f, 0.5f, 0.5f));
+                break;
+            case BSPhysicsShapeType.SHAPE_SPHERE:
+                shape = new SphereShape(0.5f);
+                break;
+
+        }
+        if (shape != null)
+        {
+            IndexedVector3 scaling = new IndexedVector3(pShapeData.Scale.X, pShapeData.Scale.Y, pShapeData.Scale.Z);
+            shape.SetMargin(world.WorldSettings.Params.collisionMargin);
+            shape.SetLocalScaling(ref scaling);
+
+        }
+        return new BulletShapeXNA(shape, pShapeData.Type);
+    }
+    //PhysicsScene.World.ptr, false
+    public override BulletShape CreateCompoundShape(BulletWorld pWorld, bool enableDynamicAabbTree)
+    {
+        return new BulletShapeXNA(new CompoundShape(enableDynamicAabbTree), BSPhysicsShapeType.SHAPE_COMPOUND);
+    }
+
+    public override int GetNumberOfCompoundChildren(BulletShape pCompoundShape)
+    {
+        CompoundShape compoundshape = ((BulletShapeXNA)pCompoundShape).shape as CompoundShape;
+        return compoundshape.GetNumChildShapes();
+    }
+    //LinksetRoot.PhysShape.ptr, newShape.ptr, displacementPos, displacementRot
+    public override void AddChildShapeToCompoundShape(BulletShape pCShape, BulletShape paddShape, Vector3 displacementPos, Quaternion displacementRot)
+    {
+        IndexedMatrix relativeTransform = new IndexedMatrix();
+        CompoundShape compoundshape = ((BulletShapeXNA)pCShape).shape as CompoundShape;
+        CollisionShape addshape = ((BulletShapeXNA)paddShape).shape;
+
+        relativeTransform._origin = new IndexedVector3(displacementPos.X, displacementPos.Y, displacementPos.Z);
+        relativeTransform.SetRotation(new IndexedQuaternion(displacementRot.X,displacementRot.Y,displacementRot.Z,displacementRot.W));
+        compoundshape.AddChildShape(ref relativeTransform, addshape);
+
+    }
+
+    public override BulletShape RemoveChildShapeFromCompoundShapeIndex(BulletShape pCShape, int pii)
+    {
+        CompoundShape compoundshape = ((BulletShapeXNA)pCShape).shape as CompoundShape;
+        CollisionShape ret = null;
+        ret = compoundshape.GetChildShape(pii);
+        compoundshape.RemoveChildShapeByIndex(pii);
+        return new BulletShapeXNA(ret, BSPhysicsShapeType.SHAPE_UNKNOWN);
+    }
+
+    public override BulletShape GetChildShapeFromCompoundShapeIndex(BulletShape cShape, int indx) { /* TODO */ return null; }
+    public override void RemoveChildShapeFromCompoundShape(BulletShape cShape, BulletShape removeShape) { /* TODO */ }
+
+    public override BulletShape CreateGroundPlaneShape(uint pLocalId, float pheight, float pcollisionMargin)
+    {
+        StaticPlaneShape m_planeshape = new StaticPlaneShape(new IndexedVector3(0,0,1),(int)pheight );
+        m_planeshape.SetMargin(pcollisionMargin);
+        m_planeshape.SetUserPointer(pLocalId);
+        return new BulletShapeXNA(m_planeshape, BSPhysicsShapeType.SHAPE_GROUNDPLANE);
+    }
+
+    public override BulletConstraint CreateHingeConstraint(BulletWorld pWorld, BulletBody pBody1, BulletBody ppBody2, Vector3 ppivotInA, Vector3 ppivotInB, Vector3 paxisInA, Vector3 paxisInB, bool puseLinearReferenceFrameA, bool pdisableCollisionsBetweenLinkedBodies)
+    {
+        HingeConstraint constrain = null;
+        DiscreteDynamicsWorld world = ((BulletWorldXNA)pWorld).world;
+        RigidBody rb1 = ((BulletBodyXNA)pBody1).rigidBody;
+        RigidBody rb2 = ((BulletBodyXNA)ppBody2).rigidBody;
+        if (rb1 != null && rb2 != null)
+        {
+            IndexedVector3 pivotInA = new IndexedVector3(ppivotInA.X, ppivotInA.Y, ppivotInA.Z);
+            IndexedVector3 pivotInB = new IndexedVector3(ppivotInB.X, ppivotInB.Y, ppivotInB.Z);
+            IndexedVector3 axisInA = new IndexedVector3(paxisInA.X, paxisInA.Y, paxisInA.Z);
+            IndexedVector3 axisInB = new IndexedVector3(paxisInB.X, paxisInB.Y, paxisInB.Z);
+            world.AddConstraint(constrain, pdisableCollisionsBetweenLinkedBodies);
+        }
+        return new BulletConstraintXNA(constrain);
+    }
+
+    public override BulletShape CreateHullShape(BulletWorld pWorld, int pHullCount, float[] pConvHulls)
+    {
+        DiscreteDynamicsWorld world = ((BulletWorldXNA)pWorld).world;
+        CompoundShape compoundshape = new CompoundShape(false);
+        
+        compoundshape.SetMargin(world.WorldSettings.Params.collisionMargin);
+        int ii = 1;
+
+        for (int i = 0; i < pHullCount; i++)
+        {
+            int vertexCount = (int) pConvHulls[ii];
+
+            IndexedVector3 centroid = new IndexedVector3(pConvHulls[ii + 1], pConvHulls[ii + 2], pConvHulls[ii + 3]);
+            IndexedMatrix childTrans = IndexedMatrix.Identity;
+            childTrans._origin = centroid;
+
+            List<IndexedVector3> virts = new List<IndexedVector3>();
+            int ender = ((ii + 4) + (vertexCount*3));
+            for (int iii = ii + 4; iii < ender; iii+=3)
+            {
+               
+                virts.Add(new IndexedVector3(pConvHulls[iii], pConvHulls[iii + 1], pConvHulls[iii +2]));
+            }
+            ConvexHullShape convexShape = new ConvexHullShape(virts, vertexCount);
+            convexShape.SetMargin(world.WorldSettings.Params.collisionMargin);
+            compoundshape.AddChildShape(ref childTrans, convexShape);
+            ii += (vertexCount*3 + 4);
+        }
+        
+        return new BulletShapeXNA(compoundshape, BSPhysicsShapeType.SHAPE_HULL);
+    }
+
+    public override BulletShape BuildHullShapeFromMesh(BulletWorld world, BulletShape meshShape) { /* TODO */ return null; }
+
+    public override BulletShape CreateMeshShape(BulletWorld pWorld, int pIndicesCount, int[] indices, int pVerticesCount, float[] verticesAsFloats)
+    {
+        //DumpRaw(indices,verticesAsFloats,pIndicesCount,pVerticesCount);
+        
+        for (int iter = 0; iter < pVerticesCount; iter++)
+        {
+            if (verticesAsFloats[iter] > 0 && verticesAsFloats[iter] < 0.0001) verticesAsFloats[iter] = 0;
+            if (verticesAsFloats[iter] < 0 && verticesAsFloats[iter] > -0.0001) verticesAsFloats[iter] = 0;
+        }
+        
+        ObjectArray<int> indicesarr = new ObjectArray<int>(indices);
+        ObjectArray<float> vertices = new ObjectArray<float>(verticesAsFloats);
+        DumpRaw(indicesarr,vertices,pIndicesCount,pVerticesCount);
+        DiscreteDynamicsWorld world = ((BulletWorldXNA)pWorld).world;
+        IndexedMesh mesh = new IndexedMesh();
+        mesh.m_indexType = PHY_ScalarType.PHY_INTEGER;
+        mesh.m_numTriangles = pIndicesCount/3;
+        mesh.m_numVertices = pVerticesCount;
+        mesh.m_triangleIndexBase = indicesarr;
+        mesh.m_vertexBase = vertices;
+        mesh.m_vertexStride = 3;
+        mesh.m_vertexType = PHY_ScalarType.PHY_FLOAT;
+        mesh.m_triangleIndexStride = 3;
+        
+        TriangleIndexVertexArray tribuilder = new TriangleIndexVertexArray();
+        tribuilder.AddIndexedMesh(mesh, PHY_ScalarType.PHY_INTEGER);
+        BvhTriangleMeshShape meshShape = new BvhTriangleMeshShape(tribuilder, true,true);
+        meshShape.SetMargin(world.WorldSettings.Params.collisionMargin);
+       // world.UpdateSingleAabb(meshShape);
+        return new BulletShapeXNA(meshShape, BSPhysicsShapeType.SHAPE_MESH);
+
+    }
+    public static void DumpRaw(ObjectArray<int>indices, ObjectArray<float> vertices, int pIndicesCount,int pVerticesCount )
+    {
+        
+        String fileName = "objTest3.raw";
+        String completePath = System.IO.Path.Combine(Util.configDir(), fileName);
+        StreamWriter sw = new StreamWriter(completePath);
+        IndexedMesh mesh = new IndexedMesh();
+
+        mesh.m_indexType = PHY_ScalarType.PHY_INTEGER;
+        mesh.m_numTriangles = pIndicesCount / 3;
+        mesh.m_numVertices = pVerticesCount;
+        mesh.m_triangleIndexBase = indices;
+        mesh.m_vertexBase = vertices;
+        mesh.m_vertexStride = 3;
+        mesh.m_vertexType = PHY_ScalarType.PHY_FLOAT;
+        mesh.m_triangleIndexStride = 3;
+
+        TriangleIndexVertexArray tribuilder = new TriangleIndexVertexArray();
+        tribuilder.AddIndexedMesh(mesh, PHY_ScalarType.PHY_INTEGER);
+
+
+
+        for (int i = 0; i < pVerticesCount; i++)
+        {
+
+            string s = vertices[indices[i * 3]].ToString("0.0000");
+            s += " " + vertices[indices[i * 3 + 1]].ToString("0.0000");
+            s += " " + vertices[indices[i * 3 + 2]].ToString("0.0000");
+        
+            sw.Write(s + "\n");
+        }
+
+        sw.Close();
+    }
+    public static void DumpRaw(int[] indices, float[] vertices, int pIndicesCount, int pVerticesCount)
+    {
+
+        String fileName = "objTest6.raw";
+        String completePath = System.IO.Path.Combine(Util.configDir(), fileName);
+        StreamWriter sw = new StreamWriter(completePath);
+        IndexedMesh mesh = new IndexedMesh();
+
+        mesh.m_indexType = PHY_ScalarType.PHY_INTEGER;
+        mesh.m_numTriangles = pIndicesCount / 3;
+        mesh.m_numVertices = pVerticesCount;
+        mesh.m_triangleIndexBase = indices;
+        mesh.m_vertexBase = vertices;
+        mesh.m_vertexStride = 3;
+        mesh.m_vertexType = PHY_ScalarType.PHY_FLOAT;
+        mesh.m_triangleIndexStride = 3;
+        
+        TriangleIndexVertexArray tribuilder = new TriangleIndexVertexArray();
+        tribuilder.AddIndexedMesh(mesh, PHY_ScalarType.PHY_INTEGER);
+
+
+        sw.WriteLine("Indices");
+        sw.WriteLine(string.Format("int[] indices = new int[{0}];",pIndicesCount));
+        for (int iter = 0; iter < indices.Length; iter++)
+        {
+            sw.WriteLine(string.Format("indices[{0}]={1};",iter,indices[iter]));
+        }
+        sw.WriteLine("VerticesFloats");
+        sw.WriteLine(string.Format("float[] vertices = new float[{0}];", pVerticesCount));
+        for (int iter = 0; iter < vertices.Length; iter++)
+        {
+            sw.WriteLine(string.Format("Vertices[{0}]={1};", iter, vertices[iter].ToString("0.0000")));
+        }
+
+            // for (int i = 0; i < pVerticesCount; i++)
+            // {
+            //
+            //     string s = vertices[indices[i * 3]].ToString("0.0000");
+            //     s += " " + vertices[indices[i * 3 + 1]].ToString("0.0000");
+            //    s += " " + vertices[indices[i * 3 + 2]].ToString("0.0000");
+            //
+            //     sw.Write(s + "\n");
+            //}
+
+            sw.Close();
+    }
+
+    public override BulletShape CreateTerrainShape(uint id, Vector3 size, float minHeight, float maxHeight, float[] heightMap, 
+                                                                float scaleFactor, float collisionMargin)
+    {
+        const int upAxis = 2;
+        HeightfieldTerrainShape terrainShape = new HeightfieldTerrainShape((int)size.X, (int)size.Y,
+                                                                           heightMap,  scaleFactor,
+                                                                           minHeight, maxHeight, upAxis,
+                                                                            false);
+        terrainShape.SetMargin(collisionMargin + 0.5f);
+        terrainShape.SetUseDiamondSubdivision(true);
+        terrainShape.SetUserPointer(id);
+        return new BulletShapeXNA(terrainShape, BSPhysicsShapeType.SHAPE_TERRAIN);
+    }
+
+    public override bool TranslationalLimitMotor(BulletConstraint pConstraint, float ponOff, float targetVelocity, float maxMotorForce)
+    {
+        TypedConstraint tconstrain = ((BulletConstraintXNA)pConstraint).constrain;
+        bool onOff = ponOff != 0;
+        bool ret = false;
+
+        switch (tconstrain.GetConstraintType())
+        {
+            case TypedConstraintType.D6_CONSTRAINT_TYPE:
+                Generic6DofConstraint constrain = tconstrain as Generic6DofConstraint;
+                constrain.GetTranslationalLimitMotor().m_enableMotor[0] = onOff;
+                constrain.GetTranslationalLimitMotor().m_targetVelocity[0] = targetVelocity;
+                constrain.GetTranslationalLimitMotor().m_maxMotorForce[0] = maxMotorForce;
+                ret = true;
+                break;
+        }
+
+
+        return ret;
+
+    }
+
+    public override int PhysicsStep(BulletWorld world, float timeStep, int maxSubSteps, float fixedTimeStep,
+                        out int updatedEntityCount, out int collidersCount)
+    {
+        /* TODO */
+        updatedEntityCount = 0;
+        collidersCount = 0;
+        return 1;
+    }
+
+    private int PhysicsStep2(BulletWorld pWorld, float timeStep, int m_maxSubSteps, float m_fixedTimeStep, 
+                    out int updatedEntityCount, out List<BulletXNA.EntityProperties> updatedEntities, 
+                    out int collidersCount, out List<BulletXNA.CollisionDesc>colliders)
+    {
+        int epic = PhysicsStepint(pWorld, timeStep, m_maxSubSteps, m_fixedTimeStep, out updatedEntityCount, out updatedEntities,
+                                out collidersCount, out colliders);
+        return epic;
+    }
+
+    private static int PhysicsStepint(BulletWorld pWorld,float timeStep, int m_maxSubSteps, float m_fixedTimeStep, out int updatedEntityCount, out List<BulletXNA.EntityProperties> updatedEntities, out int collidersCount, out List<BulletXNA.CollisionDesc> colliders)
+    {
+        int numSimSteps = 0;
+      
+
+        //if (updatedEntities is null)
+        //    updatedEntities = new List<BulletXNA.EntityProperties>();
+
+        //if (colliders is null)
+        //    colliders = new List<BulletXNA.CollisionDesc>();
+        
+
+        if (pWorld is BulletWorldXNA)
+        {
+            DiscreteDynamicsWorld world = ((BulletWorldXNA)pWorld).world;
+
+            numSimSteps = world.StepSimulation(timeStep, m_maxSubSteps, m_fixedTimeStep);
+            int updates = 0;
+
+            updatedEntityCount = world.UpdatedObjects.Count;
+            updatedEntities = new List<BulletXNA.EntityProperties>(world.UpdatedObjects);
+            updatedEntityCount = updatedEntities.Count;
+            world.UpdatedObjects.Clear();
+            
+
+            collidersCount = world.UpdatedCollisions.Count;
+            colliders = new List<BulletXNA.CollisionDesc>(world.UpdatedCollisions);
+
+            world.UpdatedCollisions.Clear();
+            m_collisionsThisFrame = 0;
+            int numManifolds = world.GetDispatcher().GetNumManifolds();
+            for (int j = 0; j < numManifolds; j++)
+            {
+                PersistentManifold contactManifold = world.GetDispatcher().GetManifoldByIndexInternal(j);
+                int numContacts = contactManifold.GetNumContacts();
+                if (numContacts == 0)
+                    continue;
+
+                CollisionObject objA = contactManifold.GetBody0() as CollisionObject;
+                CollisionObject objB = contactManifold.GetBody1() as CollisionObject;
+
+                ManifoldPoint manifoldPoint = contactManifold.GetContactPoint(0);
+                IndexedVector3 contactPoint = manifoldPoint.GetPositionWorldOnB();
+                IndexedVector3 contactNormal = -manifoldPoint.m_normalWorldOnB; // make relative to A
+
+                RecordCollision(world, objA, objB, contactPoint, contactNormal);
+                m_collisionsThisFrame ++;
+                if (m_collisionsThisFrame >= 9999999)
+                    break;
+
+
+            }
+
+
+        }
+        else
+        {
+            //if (updatedEntities is null)
+            updatedEntities = new List<BulletXNA.EntityProperties>();
+            updatedEntityCount = 0;
+            //if (colliders is null)
+            colliders = new List<BulletXNA.CollisionDesc>();
+            collidersCount = 0;
+        }
+        return numSimSteps;
+    }
+
+    private static void RecordCollision(CollisionWorld world, CollisionObject objA, CollisionObject objB, IndexedVector3 contact, IndexedVector3 norm)
+    {
+       
+        IndexedVector3 contactNormal = norm;
+        if ((objA.GetCollisionFlags() & BulletXNA.BulletCollision.CollisionFlags.BS_WANTS_COLLISIONS) == 0 &&
+            (objB.GetCollisionFlags() & BulletXNA.BulletCollision.CollisionFlags.BS_WANTS_COLLISIONS) == 0)
+        {
+            return;
+        }
+        uint idA = (uint)objA.GetUserPointer();
+        uint idB = (uint)objB.GetUserPointer();
+        if (idA > idB)
+        {
+            uint temp = idA;
+            idA = idB;
+            idB = temp;
+            contactNormal = -contactNormal;
+        }
+
+        ulong collisionID = ((ulong) idA << 32) | idB;
+
+        BulletXNA.CollisionDesc cDesc = new BulletXNA.CollisionDesc()
+                                            {
+                                                aID = idA,
+                                                bID = idB,
+                                                point = contact,
+                                                normal = contactNormal
+                                            };
+        world.UpdatedCollisions.Add(cDesc);
+        m_collisionsThisFrame++;
+
+
+    }
+    private static EntityProperties GetDebugProperties(BulletWorld pWorld, BulletBody pBody)
+    {
+        EntityProperties ent = new EntityProperties();
+        DiscreteDynamicsWorld world = ((BulletWorldXNA)pWorld).world;
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        IndexedMatrix transform = body.GetWorldTransform();
+        IndexedVector3 LinearVelocity = body.GetInterpolationLinearVelocity();
+        IndexedVector3 AngularVelocity = body.GetInterpolationAngularVelocity();
+        IndexedQuaternion rotation = transform.GetRotation();
+        ent.Acceleration = Vector3.Zero;
+        ent.ID = (uint)body.GetUserPointer();
+        ent.Position = new Vector3(transform._origin.X,transform._origin.Y,transform._origin.Z);
+        ent.Rotation = new Quaternion(rotation.X,rotation.Y,rotation.Z,rotation.W);
+        ent.Velocity = new Vector3(LinearVelocity.X, LinearVelocity.Y, LinearVelocity.Z);
+        ent.RotationalVelocity = new Vector3(AngularVelocity.X, AngularVelocity.Y, AngularVelocity.Z);
+        return ent;
+    }
+
+    public override bool UpdateParameter(BulletWorld world, uint localID, String parm, float value) { /* TODO */ return false; }
+
+    public override Vector3 GetLocalScaling(BulletShape pShape)
+    {
+        CollisionShape shape = ((BulletShapeXNA)pShape).shape;
+        IndexedVector3 scale = shape.GetLocalScaling();
+        return new Vector3(scale.X,scale.Y,scale.Z);
+    }
+
+    public bool RayCastGround(BulletWorld pWorld, Vector3 _RayOrigin, float pRayHeight, BulletBody NotMe)
+    {
+        DiscreteDynamicsWorld world = ((BulletWorldXNA)pWorld).world;
+        if (world != null)
+        {
+            if (NotMe is BulletBodyXNA && NotMe.HasPhysicalBody)
+            {
+                CollisionObject AvoidBody = ((BulletBodyXNA)NotMe).body;
+                
+                IndexedVector3 rOrigin = new IndexedVector3(_RayOrigin.X, _RayOrigin.Y, _RayOrigin.Z);
+                IndexedVector3 rEnd = new IndexedVector3(_RayOrigin.X, _RayOrigin.Y, _RayOrigin.Z - pRayHeight);
+                using (
+                    ClosestNotMeRayResultCallback rayCallback = 
+                                            new ClosestNotMeRayResultCallback(rOrigin, rEnd, AvoidBody)
+                    )
+                {
+                    world.RayTest(ref rOrigin, ref rEnd, rayCallback);
+                    if (rayCallback.HasHit())
+                    {
+                        IndexedVector3 hitLocation = rayCallback.m_hitPointWorld;
+                    }
+                    return rayCallback.HasHit();
+                }
+           }
+        }
+        return false;
+    }
+}
+}
diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSApiTemplate.cs b/OpenSim/Region/Physics/BulletSPlugin/BSApiTemplate.cs
new file mode 100644
index 0000000..794ee17
--- /dev/null
+++ b/OpenSim/Region/Physics/BulletSPlugin/BSApiTemplate.cs
@@ -0,0 +1,666 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+using System;
+using System.Collections.Generic;
+using System.Runtime.InteropServices;
+using System.Security;
+using System.Text;
+using OpenMetaverse;
+
+namespace OpenSim.Region.Physics.BulletSPlugin {
+
+    // Constraint type values as defined by Bullet
+public enum ConstraintType : int
+{
+        POINT2POINT_CONSTRAINT_TYPE = 3,
+        HINGE_CONSTRAINT_TYPE,
+        CONETWIST_CONSTRAINT_TYPE,
+        D6_CONSTRAINT_TYPE,
+        SLIDER_CONSTRAINT_TYPE,
+        CONTACT_CONSTRAINT_TYPE,
+        D6_SPRING_CONSTRAINT_TYPE,
+        MAX_CONSTRAINT_TYPE
+}
+
+// ===============================================================================
+[StructLayout(LayoutKind.Sequential)]
+public struct ConvexHull
+{
+        Vector3 Offset;
+        int VertexCount;
+        Vector3[] Vertices;
+}
+public enum BSPhysicsShapeType
+{
+        SHAPE_UNKNOWN   = 0,
+        SHAPE_CAPSULE   = 1,
+        SHAPE_BOX       = 2,
+        SHAPE_CONE      = 3,
+        SHAPE_CYLINDER  = 4,
+        SHAPE_SPHERE    = 5,
+        SHAPE_MESH      = 6,
+        SHAPE_HULL      = 7,
+    // following defined by BulletSim
+        SHAPE_GROUNDPLANE  = 20,
+        SHAPE_TERRAIN   = 21,
+        SHAPE_COMPOUND  = 22,
+        SHAPE_HEIGHTMAP = 23,
+    SHAPE_AVATAR    = 24,
+};
+
+// The native shapes have predefined shape hash keys
+public enum FixedShapeKey : ulong
+{
+    KEY_NONE        = 0,
+    KEY_BOX         = 1,
+    KEY_SPHERE      = 2,
+    KEY_CONE        = 3,
+    KEY_CYLINDER    = 4,
+    KEY_CAPSULE     = 5,
+    KEY_AVATAR      = 6,
+}
+
+[StructLayout(LayoutKind.Sequential)]
+public struct ShapeData
+{
+    public uint ID;
+    public BSPhysicsShapeType Type;
+    public Vector3 Position;
+    public Quaternion Rotation;
+    public Vector3 Velocity;
+    public Vector3 Scale;
+    public float Mass;
+    public float Buoyancy;
+    public System.UInt64 HullKey;
+    public System.UInt64 MeshKey;
+    public float Friction;
+    public float Restitution;
+    public float Collidable;    // true of things bump into this
+    public float Static;        // true if a static object. Otherwise gravity, etc.
+    public float Solid;         // true if object cannot be passed through
+    public Vector3 Size;
+
+    // note that bools are passed as floats since bool size changes by language and architecture
+    public const float numericTrue = 1f;
+    public const float numericFalse = 0f;
+}
+[StructLayout(LayoutKind.Sequential)]
+public struct SweepHit
+{
+    public uint ID;
+    public float Fraction;
+    public Vector3 Normal;
+    public Vector3 Point;
+}
+[StructLayout(LayoutKind.Sequential)]
+public struct RaycastHit
+{
+    public uint ID;
+    public float Fraction;
+    public Vector3 Normal;
+}
+[StructLayout(LayoutKind.Sequential)]
+public struct CollisionDesc
+{
+    public uint aID;
+    public uint bID;
+    public Vector3 point;
+    public Vector3 normal;
+}
+[StructLayout(LayoutKind.Sequential)]
+public struct EntityProperties
+{
+    public uint ID;
+    public Vector3 Position;
+    public Quaternion Rotation;
+    public Vector3 Velocity;
+    public Vector3 Acceleration;
+    public Vector3 RotationalVelocity;
+}
+
+// Format of this structure must match the definition in the C++ code
+// NOTE: adding the X causes compile breaks if used. These are unused symbols
+//      that can be removed from both here and the unmanaged definition of this structure.
+[StructLayout(LayoutKind.Sequential)]
+public struct ConfigurationParameters
+{
+    public float defaultFriction;
+    public float defaultDensity;
+    public float defaultRestitution;
+    public float collisionMargin;
+    public float gravity;
+
+    public float XlinearDamping;
+    public float XangularDamping;
+    public float XdeactivationTime;
+    public float XlinearSleepingThreshold;
+    public float XangularSleepingThreshold;
+        public float XccdMotionThreshold;
+        public float XccdSweptSphereRadius;
+    public float XcontactProcessingThreshold;
+
+    public float XterrainImplementation;
+    public float XterrainFriction;
+    public float XterrainHitFraction;
+    public float XterrainRestitution;
+    public float XterrainCollisionMargin;
+
+    public float XavatarFriction;
+    public float XavatarStandingFriction;
+    public float XavatarDensity;
+    public float XavatarRestitution;
+    public float XavatarCapsuleWidth;
+    public float XavatarCapsuleDepth;
+    public float XavatarCapsuleHeight;
+        public float XavatarContactProcessingThreshold;
+
+    public float XvehicleAngularDamping;
+
+        public float maxPersistantManifoldPoolSize;
+        public float maxCollisionAlgorithmPoolSize;
+        public float shouldDisableContactPoolDynamicAllocation;
+        public float shouldForceUpdateAllAabbs;
+        public float shouldRandomizeSolverOrder;
+        public float shouldSplitSimulationIslands;
+        public float shouldEnableFrictionCaching;
+        public float numberOfSolverIterations;
+
+    public float XlinksetImplementation;
+    public float XlinkConstraintUseFrameOffset;
+    public float XlinkConstraintEnableTransMotor;
+    public float XlinkConstraintTransMotorMaxVel;
+    public float XlinkConstraintTransMotorMaxForce;
+    public float XlinkConstraintERP;
+    public float XlinkConstraintCFM;
+    public float XlinkConstraintSolverIterations;
+
+    public float XphysicsLoggingFrames;
+
+    public const float numericTrue = 1f;
+    public const float numericFalse = 0f;
+}
+
+
+// The states a bullet collision object can have
+public enum ActivationState : uint
+{
+    ACTIVE_TAG = 1,
+    ISLAND_SLEEPING,
+    WANTS_DEACTIVATION,
+    DISABLE_DEACTIVATION,
+    DISABLE_SIMULATION,
+}
+
+public enum CollisionObjectTypes : int
+{
+    CO_COLLISION_OBJECT             = 1 << 0,
+    CO_RIGID_BODY                   = 1 << 1,
+    CO_GHOST_OBJECT                 = 1 << 2,
+    CO_SOFT_BODY                    = 1 << 3,
+    CO_HF_FLUID                     = 1 << 4,
+    CO_USER_TYPE                    = 1 << 5,
+}
+
+// Values used by Bullet and BulletSim to control object properties.
+// Bullet's "CollisionFlags" has more to do with operations on the
+//    object (if collisions happen, if gravity effects it, ...).
+public enum CollisionFlags : uint
+{
+    CF_STATIC_OBJECT                 = 1 << 0,
+    CF_KINEMATIC_OBJECT              = 1 << 1,
+    CF_NO_CONTACT_RESPONSE           = 1 << 2,
+    CF_CUSTOM_MATERIAL_CALLBACK      = 1 << 3,
+    CF_CHARACTER_OBJECT              = 1 << 4,
+    CF_DISABLE_VISUALIZE_OBJECT      = 1 << 5,
+    CF_DISABLE_SPU_COLLISION_PROCESS = 1 << 6,
+    // Following used by BulletSim to control collisions and updates
+    BS_SUBSCRIBE_COLLISION_EVENTS    = 1 << 10,
+    BS_FLOATS_ON_WATER               = 1 << 11,
+    BS_VEHICLE_COLLISIONS            = 1 << 12,
+    BS_NONE                          = 0,
+    BS_ALL                           = 0xFFFFFFFF
+};
+
+// Values f collisions groups and masks
+public enum CollisionFilterGroups : uint
+{
+    // Don't use the bit definitions!!  Define the use in a
+    //   filter/mask definition below. This way collision interactions
+    //   are more easily found and debugged.
+    BNoneGroup              = 0,
+    BDefaultGroup           = 1 << 0,   // 0001
+    BStaticGroup            = 1 << 1,   // 0002
+    BKinematicGroup         = 1 << 2,   // 0004
+    BDebrisGroup            = 1 << 3,   // 0008
+    BSensorTrigger          = 1 << 4,   // 0010
+    BCharacterGroup         = 1 << 5,   // 0020
+    BAllGroup               = 0x000FFFFF,
+    // Filter groups defined by BulletSim
+    BGroundPlaneGroup       = 1 << 10,  // 0400
+    BTerrainGroup           = 1 << 11,  // 0800
+    BRaycastGroup           = 1 << 12,  // 1000
+    BSolidGroup             = 1 << 13,  // 2000
+    // BLinksetGroup        = xx  // a linkset proper is either static or dynamic
+    BLinksetChildGroup      = 1 << 14,  // 4000
+};
+
+// CFM controls the 'hardness' of the constraint. 0=fixed, 0..1=violatable. Default=0
+// ERP controls amount of correction per tick. Usable range=0.1..0.8. Default=0.2.
+public enum ConstraintParams : int
+{
+    BT_CONSTRAINT_ERP = 1,  // this one is not used in Bullet as of 20120730
+    BT_CONSTRAINT_STOP_ERP,
+    BT_CONSTRAINT_CFM,
+    BT_CONSTRAINT_STOP_CFM,
+};
+public enum ConstraintParamAxis : int
+{
+    AXIS_LINEAR_X = 0,
+    AXIS_LINEAR_Y,
+    AXIS_LINEAR_Z,
+    AXIS_ANGULAR_X,
+    AXIS_ANGULAR_Y,
+    AXIS_ANGULAR_Z,
+    AXIS_LINEAR_ALL = 20,    // these last three added by BulletSim so we don't have to do zillions of calls
+    AXIS_ANGULAR_ALL,
+    AXIS_ALL
+};
+
+public abstract class BSAPITemplate
+{
+// Returns the name of the underlying Bullet engine
+public abstract string BulletEngineName { get; }
+public abstract string BulletEngineVersion { get; protected set;} 
+
+// Initialization and simulation
+public abstract BulletWorld Initialize(Vector3 maxPosition, ConfigurationParameters parms,
+                                                                                        int maxCollisions,  ref CollisionDesc[] collisionArray,
+                                                                                        int maxUpdates, ref EntityProperties[] updateArray
+                                            );
+
+public abstract int PhysicsStep(BulletWorld world, float timeStep, int maxSubSteps, float fixedTimeStep,
+                        out int updatedEntityCount, out int collidersCount);
+
+public abstract bool UpdateParameter(BulletWorld world, uint localID, String parm, float value);
+
+public abstract void Shutdown(BulletWorld sim);
+
+public abstract bool PushUpdate(BulletBody obj);
+
+// =====================================================================================
+// Mesh, hull, shape and body creation helper routines
+public abstract BulletShape CreateMeshShape(BulletWorld world,
+                int indicesCount, int[] indices,
+                int verticesCount, float[] vertices );
+
+public abstract BulletShape CreateHullShape(BulletWorld world,
+                int hullCount, float[] hulls);
+
+public abstract BulletShape BuildHullShapeFromMesh(BulletWorld world, BulletShape meshShape);
+
+public abstract BulletShape BuildNativeShape(BulletWorld world, ShapeData shapeData);
+
+public abstract bool IsNativeShape(BulletShape shape);
+
+public abstract void SetShapeCollisionMargin(BulletShape shape, float margin);
+
+public abstract BulletShape BuildCapsuleShape(BulletWorld world, float radius, float height, Vector3 scale);
+
+public abstract BulletShape CreateCompoundShape(BulletWorld sim, bool enableDynamicAabbTree);
+
+public abstract int GetNumberOfCompoundChildren(BulletShape cShape);
+
+public abstract void AddChildShapeToCompoundShape(BulletShape cShape, BulletShape addShape, Vector3 pos, Quaternion rot);
+
+public abstract BulletShape GetChildShapeFromCompoundShapeIndex(BulletShape cShape, int indx);
+
+public abstract BulletShape RemoveChildShapeFromCompoundShapeIndex(BulletShape cShape, int indx);
+
+public abstract void RemoveChildShapeFromCompoundShape(BulletShape cShape, BulletShape removeShape);
+
+public abstract void RecalculateCompoundShapeLocalAabb(BulletShape cShape);
+
+public abstract BulletShape DuplicateCollisionShape(BulletWorld sim, BulletShape srcShape, uint id);
+
+public abstract bool DeleteCollisionShape(BulletWorld world, BulletShape shape);
+
+public abstract CollisionObjectTypes GetBodyType(BulletBody obj);
+
+public abstract BulletBody CreateBodyFromShape(BulletWorld sim, BulletShape shape, uint id, Vector3 pos, Quaternion rot);
+
+public abstract BulletBody CreateBodyWithDefaultMotionState(BulletShape shape, uint id, Vector3 pos, Quaternion rot);
+
+public abstract BulletBody CreateGhostFromShape(BulletWorld sim, BulletShape shape, uint id, Vector3 pos, Quaternion rot);
+
+public abstract void DestroyObject(BulletWorld sim, BulletBody obj);
+
+// =====================================================================================
+public abstract BulletShape CreateGroundPlaneShape(uint id, float height, float collisionMargin);
+
+public abstract BulletShape CreateTerrainShape(uint id, Vector3 size, float minHeight, float maxHeight, float[] heightMap, 
+                                                                float scaleFactor, float collisionMargin);
+
+// =====================================================================================
+// Constraint creation and helper routines
+public abstract BulletConstraint Create6DofConstraint(BulletWorld world, BulletBody obj1, BulletBody obj2,
+                    Vector3 frame1loc, Quaternion frame1rot,
+                    Vector3 frame2loc, Quaternion frame2rot,
+                    bool useLinearReferenceFrameA, bool disableCollisionsBetweenLinkedBodies);
+
+public abstract BulletConstraint Create6DofConstraintToPoint(BulletWorld world, BulletBody obj1, BulletBody obj2,
+                    Vector3 joinPoint,
+                    bool useLinearReferenceFrameA, bool disableCollisionsBetweenLinkedBodies);
+
+public abstract BulletConstraint CreateHingeConstraint(BulletWorld world, BulletBody obj1, BulletBody obj2,
+                    Vector3 pivotinA, Vector3 pivotinB,
+                    Vector3 axisInA, Vector3 axisInB,
+                    bool useLinearReferenceFrameA, bool disableCollisionsBetweenLinkedBodies);
+
+public abstract void SetConstraintEnable(BulletConstraint constrain, float numericTrueFalse);
+
+public abstract void SetConstraintNumSolverIterations(BulletConstraint constrain, float iterations);
+
+public abstract bool SetFrames(BulletConstraint constrain,
+                Vector3 frameA, Quaternion frameArot, Vector3 frameB, Quaternion frameBrot);
+
+public abstract bool SetLinearLimits(BulletConstraint constrain, Vector3 low, Vector3 hi);
+
+public abstract bool SetAngularLimits(BulletConstraint constrain, Vector3 low, Vector3 hi);
+
+public abstract bool UseFrameOffset(BulletConstraint constrain, float enable);
+
+public abstract bool TranslationalLimitMotor(BulletConstraint constrain, float enable, float targetVel, float maxMotorForce);
+
+public abstract bool SetBreakingImpulseThreshold(BulletConstraint constrain, float threshold);
+
+public abstract bool CalculateTransforms(BulletConstraint constrain);
+
+public abstract bool SetConstraintParam(BulletConstraint constrain, ConstraintParams paramIndex, float value, ConstraintParamAxis axis);
+
+public abstract bool DestroyConstraint(BulletWorld world, BulletConstraint constrain);
+
+// =====================================================================================
+// btCollisionWorld entries
+public abstract void UpdateSingleAabb(BulletWorld world, BulletBody obj);
+
+public abstract void UpdateAabbs(BulletWorld world);
+
+public abstract bool GetForceUpdateAllAabbs(BulletWorld world);
+
+public abstract void SetForceUpdateAllAabbs(BulletWorld world, bool force);
+
+// =====================================================================================
+// btDynamicsWorld entries
+// public abstract bool AddObjectToWorld(BulletWorld world, BulletBody obj, Vector3 pos, Quaternion rot);
+public abstract bool AddObjectToWorld(BulletWorld world, BulletBody obj);
+
+public abstract bool RemoveObjectFromWorld(BulletWorld world, BulletBody obj);
+
+public abstract bool AddConstraintToWorld(BulletWorld world, BulletConstraint constrain, bool disableCollisionsBetweenLinkedObjects);
+
+public abstract bool RemoveConstraintFromWorld(BulletWorld world, BulletConstraint constrain);
+// =====================================================================================
+// btCollisionObject entries
+public abstract Vector3 GetAnisotripicFriction(BulletConstraint constrain);
+
+public abstract Vector3 SetAnisotripicFriction(BulletConstraint constrain, Vector3 frict);
+
+public abstract bool HasAnisotripicFriction(BulletConstraint constrain);
+
+public abstract void SetContactProcessingThreshold(BulletBody obj, float val);
+
+public abstract float GetContactProcessingThreshold(BulletBody obj);
+
+public abstract bool IsStaticObject(BulletBody obj);
+
+public abstract bool IsKinematicObject(BulletBody obj);
+
+public abstract bool IsStaticOrKinematicObject(BulletBody obj);
+
+public abstract bool HasContactResponse(BulletBody obj);
+
+public abstract void SetCollisionShape(BulletWorld sim, BulletBody obj, BulletShape shape);
+
+public abstract BulletShape GetCollisionShape(BulletBody obj);
+
+public abstract int GetActivationState(BulletBody obj);
+
+public abstract void SetActivationState(BulletBody obj, int state);
+
+public abstract void SetDeactivationTime(BulletBody obj, float dtime);
+
+public abstract float GetDeactivationTime(BulletBody obj);
+
+public abstract void ForceActivationState(BulletBody obj, ActivationState state);
+
+public abstract void Activate(BulletBody obj, bool forceActivation);
+
+public abstract bool IsActive(BulletBody obj);
+
+public abstract void SetRestitution(BulletBody obj, float val);
+
+public abstract float GetRestitution(BulletBody obj);
+
+public abstract void SetFriction(BulletBody obj, float val);
+
+public abstract float GetFriction(BulletBody obj);
+
+public abstract Vector3 GetPosition(BulletBody obj);
+
+public abstract Quaternion GetOrientation(BulletBody obj);
+
+public abstract void SetTranslation(BulletBody obj, Vector3 position, Quaternion rotation);
+
+// public abstract IntPtr GetBroadphaseHandle(BulletBody obj);
+
+// public abstract void SetBroadphaseHandle(BulletBody obj, IntPtr handle);
+
+public abstract void SetInterpolationLinearVelocity(BulletBody obj, Vector3 vel);
+
+public abstract void SetInterpolationAngularVelocity(BulletBody obj, Vector3 vel);
+
+public abstract void SetInterpolationVelocity(BulletBody obj, Vector3 linearVel, Vector3 angularVel);
+
+public abstract float GetHitFraction(BulletBody obj);
+
+public abstract void SetHitFraction(BulletBody obj, float val);
+
+public abstract CollisionFlags GetCollisionFlags(BulletBody obj);
+
+public abstract CollisionFlags SetCollisionFlags(BulletBody obj, CollisionFlags flags);
+
+public abstract CollisionFlags AddToCollisionFlags(BulletBody obj, CollisionFlags flags);
+
+public abstract CollisionFlags RemoveFromCollisionFlags(BulletBody obj, CollisionFlags flags);
+
+public abstract float GetCcdMotionThreshold(BulletBody obj);
+
+public abstract void SetCcdMotionThreshold(BulletBody obj, float val);
+
+public abstract float GetCcdSweptSphereRadius(BulletBody obj);
+
+public abstract void SetCcdSweptSphereRadius(BulletBody obj, float val);
+
+public abstract IntPtr GetUserPointer(BulletBody obj);
+
+public abstract void SetUserPointer(BulletBody obj, IntPtr val);
+
+// =====================================================================================
+// btRigidBody entries
+public abstract void ApplyGravity(BulletBody obj);
+
+public abstract void SetGravity(BulletBody obj, Vector3 val);
+
+public abstract Vector3 GetGravity(BulletBody obj);
+
+public abstract void SetDamping(BulletBody obj, float lin_damping, float ang_damping);
+
+public abstract void SetLinearDamping(BulletBody obj, float lin_damping);
+
+public abstract void SetAngularDamping(BulletBody obj, float ang_damping);
+
+public abstract float GetLinearDamping(BulletBody obj);
+
+public abstract float GetAngularDamping(BulletBody obj);
+
+public abstract float GetLinearSleepingThreshold(BulletBody obj);
+
+public abstract void ApplyDamping(BulletBody obj, float timeStep);
+
+public abstract void SetMassProps(BulletBody obj, float mass, Vector3 inertia);
+
+public abstract Vector3 GetLinearFactor(BulletBody obj);
+
+public abstract void SetLinearFactor(BulletBody obj, Vector3 factor);
+
+public abstract void SetCenterOfMassByPosRot(BulletBody obj, Vector3 pos, Quaternion rot);
+
+// Add a force to the object as if its mass is one.
+public abstract void ApplyCentralForce(BulletBody obj, Vector3 force);
+
+// Set the force being applied to the object as if its mass is one.
+public abstract void SetObjectForce(BulletBody obj, Vector3 force);
+
+public abstract Vector3 GetTotalForce(BulletBody obj);
+
+public abstract Vector3 GetTotalTorque(BulletBody obj);
+
+public abstract Vector3 GetInvInertiaDiagLocal(BulletBody obj);
+
+public abstract void SetInvInertiaDiagLocal(BulletBody obj, Vector3 inert);
+
+public abstract void SetSleepingThresholds(BulletBody obj, float lin_threshold, float ang_threshold);
+
+public abstract void ApplyTorque(BulletBody obj, Vector3 torque);
+
+// Apply force at the given point. Will add torque to the object.
+public abstract void ApplyForce(BulletBody obj, Vector3 force, Vector3 pos);
+
+// Apply impulse to the object. Same as "ApplycentralForce" but force scaled by object's mass.
+public abstract void ApplyCentralImpulse(BulletBody obj, Vector3 imp);
+
+// Apply impulse to the object's torque. Force is scaled by object's mass.
+public abstract void ApplyTorqueImpulse(BulletBody obj, Vector3 imp);
+
+// Apply impulse at the point given. For is scaled by object's mass and effects both linear and angular forces.
+public abstract void ApplyImpulse(BulletBody obj, Vector3 imp, Vector3 pos);
+
+public abstract void ClearForces(BulletBody obj);
+
+public abstract void ClearAllForces(BulletBody obj);
+
+public abstract void UpdateInertiaTensor(BulletBody obj);
+
+public abstract Vector3 GetLinearVelocity(BulletBody obj);
+
+public abstract Vector3 GetAngularVelocity(BulletBody obj);
+
+public abstract void SetLinearVelocity(BulletBody obj, Vector3 val);
+
+public abstract void SetAngularVelocity(BulletBody obj, Vector3 angularVelocity);
+
+public abstract Vector3 GetVelocityInLocalPoint(BulletBody obj, Vector3 pos);
+
+public abstract void Translate(BulletBody obj, Vector3 trans);
+
+public abstract void UpdateDeactivation(BulletBody obj, float timeStep);
+
+public abstract bool WantsSleeping(BulletBody obj);
+
+public abstract void SetAngularFactor(BulletBody obj, float factor);
+
+public abstract void SetAngularFactorV(BulletBody obj, Vector3 factor);
+
+public abstract Vector3 GetAngularFactor(BulletBody obj);
+
+public abstract bool IsInWorld(BulletWorld world, BulletBody obj);
+
+public abstract void AddConstraintRef(BulletBody obj, BulletConstraint constrain);
+
+public abstract void RemoveConstraintRef(BulletBody obj, BulletConstraint constrain);
+
+public abstract BulletConstraint GetConstraintRef(BulletBody obj, int index);
+
+public abstract int GetNumConstraintRefs(BulletBody obj);
+
+public abstract bool SetCollisionGroupMask(BulletBody body, uint filter, uint mask);
+
+// =====================================================================================
+// btCollisionShape entries
+
+public abstract float GetAngularMotionDisc(BulletShape shape);
+
+public abstract float GetContactBreakingThreshold(BulletShape shape, float defaultFactor);
+
+public abstract bool IsPolyhedral(BulletShape shape);
+
+public abstract bool IsConvex2d(BulletShape shape);
+
+public abstract bool IsConvex(BulletShape shape);
+
+public abstract bool IsNonMoving(BulletShape shape);
+
+public abstract bool IsConcave(BulletShape shape);
+
+public abstract bool IsCompound(BulletShape shape);
+
+public abstract bool IsSoftBody(BulletShape shape);
+
+public abstract bool IsInfinite(BulletShape shape);
+
+public abstract void SetLocalScaling(BulletShape shape, Vector3 scale);
+
+public abstract Vector3 GetLocalScaling(BulletShape shape);
+
+public abstract Vector3 CalculateLocalInertia(BulletShape shape, float mass);
+
+public abstract int GetShapeType(BulletShape shape);
+
+public abstract void SetMargin(BulletShape shape, float val);
+
+public abstract float GetMargin(BulletShape shape);
+
+// =====================================================================================
+// Debugging
+public virtual void DumpRigidBody(BulletWorld sim, BulletBody collisionObject) { }
+
+public virtual void DumpCollisionShape(BulletWorld sim, BulletShape collisionShape) { }
+
+public virtual void DumpConstraint(BulletWorld sim, BulletConstraint constrain) { }
+
+public virtual void DumpActivationInfo(BulletWorld sim) { }
+
+public virtual void DumpAllInfo(BulletWorld sim) { }
+
+public virtual void DumpPhysicsStatistics(BulletWorld sim) { }
+
+public virtual void ResetBroadphasePool(BulletWorld sim) { }
+
+public virtual void ResetConstraintSolver(BulletWorld sim) { }
+
+};
+}
diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSCharacter.cs b/OpenSim/Region/Physics/BulletSPlugin/BSCharacter.cs
index 4c195e1..939d38a 100644
--- a/OpenSim/Region/Physics/BulletSPlugin/BSCharacter.cs
+++ b/OpenSim/Region/Physics/BulletSPlugin/BSCharacter.cs
@@ -58,17 +58,16 @@ public sealed class BSCharacter : BSPhysObject
     private bool _flying;
     private bool _setAlwaysRun;
     private bool _throttleUpdates;
-    private bool _isColliding;
-    private bool _collidingObj;
     private bool _floatOnWater;
     private OMV.Vector3 _rotationalVelocity;
     private bool _kinematic;
     private float _buoyancy;
 
     // The friction and velocity of the avatar is modified depending on whether walking or not.
-    private OMV.Vector3 _appliedVelocity;   // the last velocity applied to the avatar
     private float _currentFriction;         // the friction currently being used (changed by setVelocity).
 
+    private BSVMotor _velocityMotor;
+
     private OMV.Vector3 _PIDTarget;
     private bool _usePID;
     private float _PIDTau;
@@ -83,34 +82,36 @@ public sealed class BSCharacter : BSPhysObject
         _physicsActorType = (int)ActorTypes.Agent;
         _position = pos;
 
-        // Old versions of ScenePresence passed only the height. If width and/or depth are zero,
-        //     replace with the default values.
-        _size = size;
-        if (_size.X == 0f) _size.X = PhysicsScene.Params.avatarCapsuleDepth;
-        if (_size.Y == 0f) _size.Y = PhysicsScene.Params.avatarCapsuleWidth;
-
         _flying = isFlying;
         _orientation = OMV.Quaternion.Identity;
         _velocity = OMV.Vector3.Zero;
-        _appliedVelocity = OMV.Vector3.Zero;
         _buoyancy = ComputeBuoyancyFromFlying(isFlying);
-        _currentFriction = PhysicsScene.Params.avatarStandingFriction;
-        _avatarDensity = PhysicsScene.Params.avatarDensity;
+        _currentFriction = BSParam.AvatarStandingFriction;
+        _avatarDensity = BSParam.AvatarDensity;
 
-        // The dimensions of the avatar capsule are kept in the scale.
+        // Old versions of ScenePresence passed only the height. If width and/or depth are zero,
+        //     replace with the default values.
+        _size = size;
+        if (_size.X == 0f) _size.X = BSParam.AvatarCapsuleDepth;
+        if (_size.Y == 0f) _size.Y = BSParam.AvatarCapsuleWidth;
+
+        // The dimensions of the physical capsule are kept in the scale.
         // Physics creates a unit capsule which is scaled by the physics engine.
-        ComputeAvatarScale(_size);
+        Scale = ComputeAvatarScale(_size);
         // set _avatarVolume and _mass based on capsule size, _density and Scale
         ComputeAvatarVolumeAndMass();
+
+        SetupMovementMotor();
+
         DetailLog("{0},BSCharacter.create,call,size={1},scale={2},density={3},volume={4},mass={5}",
                             LocalID, _size, Scale, _avatarDensity, _avatarVolume, RawMass);
 
-        // do actual create at taint time
+        // do actual creation in taint time
         PhysicsScene.TaintedObject("BSCharacter.create", delegate()
         {
             DetailLog("{0},BSCharacter.create,taint", LocalID);
             // New body and shape into PhysBody and PhysShape
-            PhysicsScene.Shapes.GetBodyAndShape(true, PhysicsScene.World, this, null, null);
+            PhysicsScene.Shapes.GetBodyAndShape(true, PhysicsScene.World, this);
 
             SetPhysicalProperties();
         });
@@ -120,54 +121,155 @@ public sealed class BSCharacter : BSPhysObject
     // called when this character is being destroyed and the resources should be released
     public override void Destroy()
     {
+        base.Destroy();
+
         DetailLog("{0},BSCharacter.Destroy", LocalID);
         PhysicsScene.TaintedObject("BSCharacter.destroy", delegate()
         {
             PhysicsScene.Shapes.DereferenceBody(PhysBody, true, null);
+            PhysBody.Clear();
             PhysicsScene.Shapes.DereferenceShape(PhysShape, true, null);
+            PhysShape.Clear();
         });
     }
 
     private void SetPhysicalProperties()
     {
-        BulletSimAPI.RemoveObjectFromWorld2(PhysicsScene.World.ptr, PhysBody.ptr);
+        PhysicsScene.PE.RemoveObjectFromWorld(PhysicsScene.World, PhysBody);
 
         ZeroMotion(true);
         ForcePosition = _position;
+
         // Set the velocity and compute the proper friction
+        _velocityMotor.Reset();
+        _velocityMotor.SetTarget(_velocity);
+        _velocityMotor.SetCurrent(_velocity);
         ForceVelocity = _velocity;
 
         // This will enable or disable the flying buoyancy of the avatar.
         // Needs to be reset especially when an avatar is recreated after crossing a region boundry.
         Flying = _flying;
 
-        BulletSimAPI.SetRestitution2(PhysBody.ptr, PhysicsScene.Params.avatarRestitution);
-        BulletSimAPI.SetMargin2(PhysShape.ptr, PhysicsScene.Params.collisionMargin);
-        BulletSimAPI.SetLocalScaling2(PhysShape.ptr, Scale);
-        BulletSimAPI.SetContactProcessingThreshold2(PhysBody.ptr, PhysicsScene.Params.contactProcessingThreshold);
-        if (PhysicsScene.Params.ccdMotionThreshold > 0f)
+        PhysicsScene.PE.SetRestitution(PhysBody, BSParam.AvatarRestitution);
+        PhysicsScene.PE.SetMargin(PhysShape, PhysicsScene.Params.collisionMargin);
+        PhysicsScene.PE.SetLocalScaling(PhysShape, Scale);
+        PhysicsScene.PE.SetContactProcessingThreshold(PhysBody, BSParam.ContactProcessingThreshold);
+        if (BSParam.CcdMotionThreshold > 0f)
         {
-            BulletSimAPI.SetCcdMotionThreshold2(PhysBody.ptr, PhysicsScene.Params.ccdMotionThreshold);
-            BulletSimAPI.SetCcdSweptSphereRadius2(PhysBody.ptr, PhysicsScene.Params.ccdSweptSphereRadius);
+            PhysicsScene.PE.SetCcdMotionThreshold(PhysBody, BSParam.CcdMotionThreshold);
+            PhysicsScene.PE.SetCcdSweptSphereRadius(PhysBody, BSParam.CcdSweptSphereRadius);
         }
 
-        UpdatePhysicalMassProperties(RawMass);
+        UpdatePhysicalMassProperties(RawMass, false);
 
         // Make so capsule does not fall over
-        BulletSimAPI.SetAngularFactorV2(PhysBody.ptr, OMV.Vector3.Zero);
+        PhysicsScene.PE.SetAngularFactorV(PhysBody, OMV.Vector3.Zero);
 
-        BulletSimAPI.AddToCollisionFlags2(PhysBody.ptr, CollisionFlags.CF_CHARACTER_OBJECT);
+        PhysicsScene.PE.AddToCollisionFlags(PhysBody, CollisionFlags.CF_CHARACTER_OBJECT);
 
-        BulletSimAPI.AddObjectToWorld2(PhysicsScene.World.ptr, PhysBody.ptr);
+        PhysicsScene.PE.AddObjectToWorld(PhysicsScene.World, PhysBody);
 
-        // BulletSimAPI.ForceActivationState2(BSBody.ptr, ActivationState.ACTIVE_TAG);
-        BulletSimAPI.ForceActivationState2(PhysBody.ptr, ActivationState.DISABLE_DEACTIVATION);
-        BulletSimAPI.UpdateSingleAabb2(PhysicsScene.World.ptr, PhysBody.ptr);
+        // PhysicsScene.PE.ForceActivationState(PhysBody, ActivationState.ACTIVE_TAG);
+        PhysicsScene.PE.ForceActivationState(PhysBody, ActivationState.DISABLE_DEACTIVATION);
+        PhysicsScene.PE.UpdateSingleAabb(PhysicsScene.World, PhysBody);
 
         // Do this after the object has been added to the world
-        BulletSimAPI.SetCollisionFilterMask2(PhysBody.ptr,
-                        (uint)CollisionFilterGroups.AvatarFilter,
-                        (uint)CollisionFilterGroups.AvatarMask);
+        PhysBody.collisionType = CollisionType.Avatar;
+        PhysBody.ApplyCollisionMask(PhysicsScene);
+    }
+
+    // The avatar's movement is controlled by this motor that speeds up and slows down
+    //    the avatar seeking to reach the motor's target speed.
+    // This motor runs as a prestep action for the avatar so it will keep the avatar
+    //    standing as well as moving. Destruction of the avatar will destroy the pre-step action.
+    private void SetupMovementMotor()
+    {
+        // Infinite decay and timescale values so motor only changes current to target values.
+        _velocityMotor = new BSVMotor("BSCharacter.Velocity", 
+                                            0.2f,                       // time scale
+                                            BSMotor.Infinite,           // decay time scale
+                                            BSMotor.InfiniteVector,     // friction timescale
+                                            1f                          // efficiency
+        );
+        // _velocityMotor.PhysicsScene = PhysicsScene; // DEBUG DEBUG so motor will output detail log messages.
+
+        RegisterPreStepAction("BSCharactor.Movement", LocalID, delegate(float timeStep)
+        {
+            // TODO: Decide if the step parameters should be changed depending on the avatar's
+            //     state (flying, colliding, ...). There is code in ODE to do this.
+
+            OMV.Vector3 stepVelocity = _velocityMotor.Step(timeStep);
+
+            // If falling, we keep the world's downward vector no matter what the other axis specify.
+            if (!Flying && !IsColliding)
+            {
+                stepVelocity.Z = _velocity.Z;
+                // DetailLog("{0},BSCharacter.MoveMotor,taint,overrideStepZWithWorldZ,stepVel={1}", LocalID, stepVelocity);
+            }
+
+            // 'stepVelocity' is now the speed we'd like the avatar to move in. Turn that into an instantanous force.
+            OMV.Vector3 moveForce = (stepVelocity - _velocity) * Mass;
+
+            // Should we check for move force being small and forcing velocity to zero?
+
+            // Add special movement force to allow avatars to walk up stepped surfaces.
+            moveForce += WalkUpStairs();
+
+            DetailLog("{0},BSCharacter.MoveMotor,move,stepVel={1},vel={2},mass={3},moveForce={4}", LocalID, stepVelocity, _velocity, Mass, moveForce);
+            PhysicsScene.PE.ApplyCentralImpulse(PhysBody, moveForce);
+        });
+    }
+
+    // Decide of the character is colliding with a low object and compute a force to pop the
+    //    avatar up so it has a chance of walking up and over the low object.
+    private OMV.Vector3 WalkUpStairs()
+    {
+        OMV.Vector3 ret = OMV.Vector3.Zero;
+
+        // This test is done if moving forward, not flying and is colliding with something.
+        // DetailLog("{0},BSCharacter.WalkUpStairs,IsColliding={1},flying={2},targSpeed={3},collisions={4}",
+        //                 LocalID, IsColliding, Flying, TargetSpeed, CollisionsLastTick.Count);
+        if (IsColliding && !Flying && TargetSpeed > 0.1f /* && ForwardSpeed < 0.1f */)
+        {
+            // The range near the character's feet where we will consider stairs
+            float nearFeetHeightMin = RawPosition.Z - (Size.Z / 2f) + 0.05f;
+            float nearFeetHeightMax = nearFeetHeightMin + BSParam.AvatarStepHeight;
+
+            // Look for a collision point that is near the character's feet and is oriented the same as the charactor is
+            foreach (KeyValuePair<uint, ContactPoint> kvp in CollisionsLastTick.m_objCollisionList)
+            {
+                // Don't care about collisions with the terrain
+                if (kvp.Key > PhysicsScene.TerrainManager.HighestTerrainID)
+                {
+                    OMV.Vector3 touchPosition = kvp.Value.Position;
+                    // DetailLog("{0},BSCharacter.WalkUpStairs,min={1},max={2},touch={3}",
+                    //                 LocalID, nearFeetHeightMin, nearFeetHeightMax, touchPosition);
+                    if (touchPosition.Z >= nearFeetHeightMin && touchPosition.Z <= nearFeetHeightMax)
+                    {
+                        // This contact is within the 'near the feet' range.
+                        // The normal should be our contact point to the object so it is pointing away
+                        //    thus the difference between our facing orientation and the normal should be small.
+                        OMV.Vector3 directionFacing = OMV.Vector3.UnitX * RawOrientation;
+                        OMV.Vector3 touchNormal = OMV.Vector3.Normalize(kvp.Value.SurfaceNormal);
+                        float diff = Math.Abs(OMV.Vector3.Distance(directionFacing, touchNormal));
+                        if (diff < BSParam.AvatarStepApproachFactor)
+                        {
+                            // Found the stairs contact point. Push up a little to raise the character.
+                            float upForce = (touchPosition.Z - nearFeetHeightMin) * Mass * BSParam.AvatarStepForceFactor;
+                            ret = new OMV.Vector3(0f, 0f, upForce);
+
+                            // Also move the avatar up for the new height
+                            OMV.Vector3 displacement = new OMV.Vector3(0f, 0f, BSParam.AvatarStepHeight / 2f);
+                            ForcePosition = RawPosition + displacement;
+                        }
+                        DetailLog("{0},BSCharacter.WalkUpStairs,touchPos={1},nearFeetMin={2},faceDir={3},norm={4},diff={5},ret={6}",
+                                LocalID, touchPosition, nearFeetHeightMin, directionFacing, touchNormal, diff, ret);
+                    }
+                }
+            }
+        }
+
+        return ret;
     }
 
     public override void RequestPhysicsterseUpdate()
@@ -185,24 +287,31 @@ public sealed class BSCharacter : BSPhysObject
         }
 
         set {
-            // When an avatar's size is set, only the height is changed.
             _size = value;
-            ComputeAvatarScale(_size);
+            // Old versions of ScenePresence passed only the height. If width and/or depth are zero,
+            //     replace with the default values.
+            if (_size.X == 0f) _size.X = BSParam.AvatarCapsuleDepth;
+            if (_size.Y == 0f) _size.Y = BSParam.AvatarCapsuleWidth;
+
+            Scale = ComputeAvatarScale(_size);
             ComputeAvatarVolumeAndMass();
             DetailLog("{0},BSCharacter.setSize,call,size={1},scale={2},density={3},volume={4},mass={5}",
                             LocalID, _size, Scale, _avatarDensity, _avatarVolume, RawMass);
 
             PhysicsScene.TaintedObject("BSCharacter.setSize", delegate()
             {
-                BulletSimAPI.SetLocalScaling2(PhysShape.ptr, Scale);
-                UpdatePhysicalMassProperties(RawMass);
+                if (PhysBody.HasPhysicalBody && PhysShape.HasPhysicalShape)
+                {
+                    PhysicsScene.PE.SetLocalScaling(PhysShape, Scale);
+                    UpdatePhysicalMassProperties(RawMass, true);
+                    // Make sure this change appears as a property update event
+                    PhysicsScene.PE.PushUpdate(PhysBody);
+                }
             });
 
         }
     }
 
-    public override OMV.Vector3 Scale { get; set; }
-
     public override PrimitiveBaseShape Shape
     {
         set { BaseShape = value; }
@@ -236,7 +345,8 @@ public sealed class BSCharacter : BSPhysObject
         // Zero some other properties directly into the physics engine
         PhysicsScene.TaintedObject(inTaintTime, "BSCharacter.ZeroMotion", delegate()
         {
-            BulletSimAPI.ClearAllForces2(PhysBody.ptr);
+            if (PhysBody.HasPhysicalBody)
+                PhysicsScene.PE.ClearAllForces(PhysBody);
         });
     }
     public override void ZeroAngularMotion(bool inTaintTime)
@@ -245,10 +355,13 @@ public sealed class BSCharacter : BSPhysObject
 
         PhysicsScene.TaintedObject(inTaintTime, "BSCharacter.ZeroMotion", delegate()
         {
-            BulletSimAPI.SetInterpolationAngularVelocity2(PhysBody.ptr, OMV.Vector3.Zero);
-            BulletSimAPI.SetAngularVelocity2(PhysBody.ptr, OMV.Vector3.Zero);
-            // The next also get rid of applied linear force but the linear velocity is untouched.
-            BulletSimAPI.ClearForces2(PhysBody.ptr);
+            if (PhysBody.HasPhysicalBody)
+            {
+                PhysicsScene.PE.SetInterpolationAngularVelocity(PhysBody, OMV.Vector3.Zero);
+                PhysicsScene.PE.SetAngularVelocity(PhysBody, OMV.Vector3.Zero);
+                // The next also get rid of applied linear force but the linear velocity is untouched.
+                PhysicsScene.PE.ClearForces(PhysBody);
+            }
         });
     }
 
@@ -263,29 +376,31 @@ public sealed class BSCharacter : BSPhysObject
     public override OMV.Vector3 Position {
         get {
             // Don't refetch the position because this function is called a zillion times
-            // _position = BulletSimAPI.GetObjectPosition2(Scene.World.ptr, LocalID);
+            // _position = PhysicsScene.PE.GetObjectPosition(Scene.World, LocalID);
             return _position;
         }
         set {
             _position = value;
-            PositionSanityCheck();
 
             PhysicsScene.TaintedObject("BSCharacter.setPosition", delegate()
             {
                 DetailLog("{0},BSCharacter.SetPosition,taint,pos={1},orient={2}", LocalID, _position, _orientation);
-                BulletSimAPI.SetTranslation2(PhysBody.ptr, _position, _orientation);
+                ForcePosition = _position;
             });
         }
     }
     public override OMV.Vector3 ForcePosition {
         get {
-            _position = BulletSimAPI.GetPosition2(PhysBody.ptr);
+            _position = PhysicsScene.PE.GetPosition(PhysBody);
             return _position;
         }
         set {
             _position = value;
-            PositionSanityCheck();
-            BulletSimAPI.SetTranslation2(PhysBody.ptr, _position, _orientation);
+            if (PhysBody.HasPhysicalBody)
+            {
+                PositionSanityCheck();
+                PhysicsScene.PE.SetTranslation(PhysBody, _position, _orientation);
+            }
         }
     }
 
@@ -297,8 +412,17 @@ public sealed class BSCharacter : BSPhysObject
     {
         bool ret = false;
 
+        // TODO: check for out of bounds
+        if (!PhysicsScene.TerrainManager.IsWithinKnownTerrain(RawPosition))
+        {
+            // The character is out of the known/simulated area.
+            // Upper levels of code will handle the transition to other areas so, for
+            //     the time, we just ignore the position.
+            return ret;
+        }
+
         // If below the ground, move the avatar up
-        float terrainHeight = PhysicsScene.TerrainManager.GetTerrainHeightAtXYZ(_position);
+        float terrainHeight = PhysicsScene.TerrainManager.GetTerrainHeightAtXYZ(RawPosition);
         if (Position.Z < terrainHeight)
         {
             DetailLog("{0},BSCharacter.PositionAdjustUnderGround,call,pos={1},terrain={2}", LocalID, _position, terrainHeight);
@@ -307,7 +431,7 @@ public sealed class BSCharacter : BSPhysObject
         }
         if ((CurrentCollisionFlags & CollisionFlags.BS_FLOATS_ON_WATER) != 0)
         {
-            float waterHeight = PhysicsScene.GetWaterLevelAtXYZ(_position);
+            float waterHeight = PhysicsScene.TerrainManager.GetWaterLevelAtXYZ(_position);
             if (Position.Z < waterHeight)
             {
                 _position.Z = waterHeight;
@@ -315,7 +439,6 @@ public sealed class BSCharacter : BSPhysObject
             }
         }
 
-        // TODO: check for out of bounds
         return ret;
     }
 
@@ -332,7 +455,8 @@ public sealed class BSCharacter : BSPhysObject
             PhysicsScene.TaintedObject(inTaintTime, "BSCharacter.PositionSanityCheck", delegate()
             {
                 DetailLog("{0},BSCharacter.PositionSanityCheck,taint,pos={1},orient={2}", LocalID, _position, _orientation);
-                BulletSimAPI.SetTranslation2(PhysBody.ptr, _position, _orientation);
+                if (PhysBody.HasPhysicalBody)
+                    PhysicsScene.PE.SetTranslation(PhysBody, _position, _orientation);
             });
             ret = true;
         }
@@ -345,10 +469,10 @@ public sealed class BSCharacter : BSPhysObject
     public override float RawMass { 
         get {return _mass; }
     }
-    public override void UpdatePhysicalMassProperties(float physMass)
+    public override void UpdatePhysicalMassProperties(float physMass, bool inWorld)
     {
-        OMV.Vector3 localInertia = BulletSimAPI.CalculateLocalInertia2(PhysShape.ptr, physMass);
-        BulletSimAPI.SetMassProps2(PhysBody.ptr, physMass, localInertia);
+        OMV.Vector3 localInertia = PhysicsScene.PE.CalculateLocalInertia(PhysShape, physMass);
+        PhysicsScene.PE.SetMassProps(PhysBody, physMass, localInertia);
     }
 
     public override OMV.Vector3 Force {
@@ -359,7 +483,8 @@ public sealed class BSCharacter : BSPhysObject
             PhysicsScene.TaintedObject("BSCharacter.SetForce", delegate()
             {
                 DetailLog("{0},BSCharacter.setForce,taint,force={1}", LocalID, _force);
-                BulletSimAPI.SetObjectForce2(PhysBody.ptr, _force);
+                if (PhysBody.HasPhysicalBody)
+                    PhysicsScene.PE.SetObjectForce(PhysBody, _force);
             });
         }
     }
@@ -376,6 +501,36 @@ public sealed class BSCharacter : BSPhysObject
 
     public override OMV.Vector3 GeometricCenter { get { return OMV.Vector3.Zero; } }
     public override OMV.Vector3 CenterOfMass { get { return OMV.Vector3.Zero; } }
+
+    // Sets the target in the motor. This starts the changing of the avatar's velocity.
+    public override OMV.Vector3 TargetVelocity
+    {
+        get
+        {
+            return _velocityMotor.TargetValue;
+        }
+        set
+        {
+            DetailLog("{0},BSCharacter.setTargetVelocity,call,vel={1}", LocalID, value);
+            OMV.Vector3 targetVel = value;
+            if (_setAlwaysRun)
+                targetVel *= BSParam.AvatarAlwaysRunFactor;
+
+            PhysicsScene.TaintedObject("BSCharacter.setTargetVelocity", delegate()
+            {
+                _velocityMotor.Reset();
+                _velocityMotor.SetTarget(targetVel);
+                _velocityMotor.SetCurrent(_velocity);
+                _velocityMotor.Enabled = true;
+            });
+        }
+    }
+    public override OMV.Vector3 RawVelocity
+    {
+        get { return _velocity; }
+        set { _velocity = value; }
+    }
+    // Directly setting velocity means this is what the user really wants now.
     public override OMV.Vector3 Velocity {
         get { return _velocity; }
         set {
@@ -383,6 +538,12 @@ public sealed class BSCharacter : BSPhysObject
             // m_log.DebugFormat("{0}: set velocity = {1}", LogHeader, _velocity);
             PhysicsScene.TaintedObject("BSCharacter.setVelocity", delegate()
             {
+                _velocityMotor.Reset();
+                _velocityMotor.SetCurrent(_velocity);
+                _velocityMotor.SetTarget(_velocity);
+                // Even though the motor is initialized, it's not used and the velocity goes straight into the avatar.
+                _velocityMotor.Enabled = false;
+
                 DetailLog("{0},BSCharacter.setVelocity,taint,vel={1}", LocalID, _velocity);
                 ForceVelocity = _velocity;
             });
@@ -391,30 +552,32 @@ public sealed class BSCharacter : BSPhysObject
     public override OMV.Vector3 ForceVelocity {
         get { return _velocity; }
         set {
+            PhysicsScene.AssertInTaintTime("BSCharacter.ForceVelocity");
+
+            _velocity = value;
             // Depending on whether the avatar is moving or not, change the friction
             //    to keep the avatar from slipping around
             if (_velocity.Length() == 0)
             {
-                if (_currentFriction != PhysicsScene.Params.avatarStandingFriction)
+                if (_currentFriction != BSParam.AvatarStandingFriction)
                 {
-                    _currentFriction = PhysicsScene.Params.avatarStandingFriction;
-                    BulletSimAPI.SetFriction2(PhysBody.ptr, _currentFriction);
+                    _currentFriction = BSParam.AvatarStandingFriction;
+                    if (PhysBody.HasPhysicalBody)
+                        PhysicsScene.PE.SetFriction(PhysBody, _currentFriction);
                 }
             }
             else
             {
-                if (_currentFriction != PhysicsScene.Params.avatarFriction)
+                if (_currentFriction != BSParam.AvatarFriction)
                 {
-                    _currentFriction = PhysicsScene.Params.avatarFriction;
-                    BulletSimAPI.SetFriction2(PhysBody.ptr, _currentFriction);
+                    _currentFriction = BSParam.AvatarFriction;
+                    if (PhysBody.HasPhysicalBody)
+                        PhysicsScene.PE.SetFriction(PhysBody, _currentFriction);
                 }
             }
-            _velocity = value;
-            // Remember the set velocity so we can suppress the reduction by friction, ...
-            _appliedVelocity = value;
 
-            BulletSimAPI.SetLinearVelocity2(PhysBody.ptr, _velocity);
-            BulletSimAPI.Activate2(PhysBody.ptr, true);
+            PhysicsScene.PE.SetLinearVelocity(PhysBody, _velocity);
+            PhysicsScene.PE.Activate(PhysBody, true);
         }
     }
     public override OMV.Vector3 Torque {
@@ -439,13 +602,16 @@ public sealed class BSCharacter : BSPhysObject
     public override OMV.Quaternion Orientation {
         get { return _orientation; }
         set {
-            _orientation = value;
-            // m_log.DebugFormat("{0}: set orientation to {1}", LogHeader, _orientation);
-            PhysicsScene.TaintedObject("BSCharacter.setOrientation", delegate()
+            // Orientation is set zillions of times when an avatar is walking. It's like
+            //      the viewer doesn't trust us.
+            if (_orientation != value)
             {
-                // _position = BulletSimAPI.GetPosition2(BSBody.ptr);
-                BulletSimAPI.SetTranslation2(PhysBody.ptr, _position, _orientation);
-            });
+                _orientation = value;
+                PhysicsScene.TaintedObject("BSCharacter.setOrientation", delegate()
+                {
+                    ForceOrientation = _orientation;
+                });
+            }
         }
     }
     // Go directly to Bullet to get/set the value.
@@ -453,13 +619,17 @@ public sealed class BSCharacter : BSPhysObject
     {
         get
         {
-            _orientation = BulletSimAPI.GetOrientation2(PhysBody.ptr);
+            _orientation = PhysicsScene.PE.GetOrientation(PhysBody);
             return _orientation;
         }
         set
         {
             _orientation = value;
-            BulletSimAPI.SetTranslation2(PhysBody.ptr, _position, _orientation);
+            if (PhysBody.HasPhysicalBody)
+            {
+                // _position = PhysicsScene.PE.GetPosition(BSBody);
+                PhysicsScene.PE.SetTranslation(PhysBody, _position, _orientation);
+            }
         }
     }
     public override int PhysicsActorType {
@@ -482,6 +652,7 @@ public sealed class BSCharacter : BSPhysObject
         get { return _flying; }
         set {
             _flying = value;
+
             // simulate flying by changing the effect of gravity
             Buoyancy = ComputeBuoyancyFromFlying(_flying);
         }
@@ -500,27 +671,18 @@ public sealed class BSCharacter : BSPhysObject
         get { return _throttleUpdates; }
         set { _throttleUpdates = value; }
     }
-    public override bool IsColliding {
-        get { return (CollidingStep == PhysicsScene.SimulationStep); }
-        set { _isColliding = value; }
-    }
-    public override bool CollidingGround {
-        get { return (CollidingGroundStep == PhysicsScene.SimulationStep); }
-        set { CollidingGround = value; }
-    }
-    public override bool CollidingObj {
-        get { return _collidingObj; }
-        set { _collidingObj = value; }
-    }
     public override bool FloatOnWater {
         set {
             _floatOnWater = value;
             PhysicsScene.TaintedObject("BSCharacter.setFloatOnWater", delegate()
             {
-                if (_floatOnWater)
-                    CurrentCollisionFlags = BulletSimAPI.AddToCollisionFlags2(PhysBody.ptr, CollisionFlags.BS_FLOATS_ON_WATER);
-                else
-                    CurrentCollisionFlags = BulletSimAPI.RemoveFromCollisionFlags2(PhysBody.ptr, CollisionFlags.BS_FLOATS_ON_WATER);
+                if (PhysBody.HasPhysicalBody)
+                {
+                    if (_floatOnWater)
+                        CurrentCollisionFlags = PhysicsScene.PE.AddToCollisionFlags(PhysBody, CollisionFlags.BS_FLOATS_ON_WATER);
+                    else
+                        CurrentCollisionFlags = PhysicsScene.PE.RemoveFromCollisionFlags(PhysBody, CollisionFlags.BS_FLOATS_ON_WATER);
+                }
             });
         }
     }
@@ -549,11 +711,15 @@ public sealed class BSCharacter : BSPhysObject
     }
     public override float ForceBuoyancy {
         get { return _buoyancy; }
-        set { _buoyancy = value;
+        set { 
+            PhysicsScene.AssertInTaintTime("BSCharacter.ForceBuoyancy");
+
+            _buoyancy = value;
             DetailLog("{0},BSCharacter.setForceBuoyancy,taint,buoy={1}", LocalID, _buoyancy);
             // Buoyancy is faked by changing the gravity applied to the object
             float grav = PhysicsScene.Params.gravity * (1f - _buoyancy);
-            BulletSimAPI.SetGravity2(PhysBody.ptr, new OMV.Vector3(0f, 0f, grav));
+            if (PhysBody.HasPhysicalBody)
+                PhysicsScene.PE.SetGravity(PhysBody, new OMV.Vector3(0f, 0f, grav));
         }
     }
 
@@ -589,24 +755,40 @@ public sealed class BSCharacter : BSPhysObject
     public override float APIDStrength { set { return; } }
     public override float APIDDamping { set { return; } }
 
-    public override void AddForce(OMV.Vector3 force, bool pushforce) {
+    public override void AddForce(OMV.Vector3 force, bool pushforce)
+    {
+        // Since this force is being applied in only one step, make this a force per second.
+        OMV.Vector3 addForce = force / PhysicsScene.LastTimeStep;
+        AddForce(addForce, pushforce, false);
+    }
+    private void AddForce(OMV.Vector3 force, bool pushforce, bool inTaintTime) {
         if (force.IsFinite())
         {
-            _force.X += force.X;
-            _force.Y += force.Y;
-            _force.Z += force.Z;
-            // m_log.DebugFormat("{0}: AddForce. adding={1}, newForce={2}", LogHeader, force, _force);
-            PhysicsScene.TaintedObject("BSCharacter.AddForce", delegate()
+            float magnitude = force.Length();
+            if (magnitude > BSParam.MaxAddForceMagnitude)
             {
-                DetailLog("{0},BSCharacter.setAddForce,taint,addedForce={1}", LocalID, _force);
-                BulletSimAPI.SetObjectForce2(PhysBody.ptr, _force);
+                // Force has a limit
+                force = force / magnitude * BSParam.MaxAddForceMagnitude;
+            }
+
+            OMV.Vector3 addForce = force;
+            // DetailLog("{0},BSCharacter.addForce,call,force={1}", LocalID, addForce);
+
+            PhysicsScene.TaintedObject(inTaintTime, "BSCharacter.AddForce", delegate()
+            {
+                // Bullet adds this central force to the total force for this tick
+                // DetailLog("{0},BSCharacter.addForce,taint,force={1}", LocalID, addForce);
+                if (PhysBody.HasPhysicalBody)
+                {
+                    PhysicsScene.PE.ApplyCentralForce(PhysBody, addForce);
+                }
             });
         }
         else
         {
-            m_log.ErrorFormat("{0}: Got a NaN force applied to a Character", LogHeader);
+            m_log.WarnFormat("{0}: Got a NaN force applied to a character. LocalID={1}", LogHeader, LocalID);
+            return;
         }
-        //m_lastUpdateSent = false;
     }
 
     public override void AddAngularForce(OMV.Vector3 force, bool pushforce) {
@@ -614,24 +796,31 @@ public sealed class BSCharacter : BSPhysObject
     public override void SetMomentum(OMV.Vector3 momentum) {
     }
 
-    private void ComputeAvatarScale(OMV.Vector3 size)
+    private OMV.Vector3 ComputeAvatarScale(OMV.Vector3 size)
     {
-        // The 'size' given by the simulator is the mid-point of the avatar
-        //    and X and Y are unspecified.
-
-        OMV.Vector3 newScale = size;
-        // newScale.X = PhysicsScene.Params.avatarCapsuleWidth;
-        // newScale.Y = PhysicsScene.Params.avatarCapsuleDepth;
-
-        // From the total height, remove the capsule half spheres that are at each end
-        // The 1.15f came from ODE. Not sure what this factors in.
-        // newScale.Z = (size.Z * 1.15f) - (newScale.X + newScale.Y);
+        OMV.Vector3 newScale;
+        
+        // Bullet's capsule total height is the "passed height + radius * 2";
+        // The base capsule is 1 diameter and 2 height (passed radius=0.5, passed height = 1)
+        // The number we pass in for 'scaling' is the multiplier to get that base
+        //     shape to be the size desired.
+        // So, when creating the scale for the avatar height, we take the passed height
+        //     (size.Z) and remove the caps.
+        // Another oddity of the Bullet capsule implementation is that it presumes the Y
+        //     dimension is the radius of the capsule. Even though some of the code allows
+        //     for a asymmetrical capsule, other parts of the code presume it is cylindrical.
+
+        // Scale is multiplier of radius with one of "0.5"
+        newScale.X = size.X / 2f;
+        newScale.Y = size.Y / 2f;
 
         // The total scale height is the central cylindar plus the caps on the two ends.
-        newScale.Z = size.Z + (Math.Min(size.X, size.Y) * 2f);
+        newScale.Z = (size.Z + (Math.Min(size.X, size.Y) * 2)) / 2f;
+        // If smaller than the endcaps, just fake like we're almost that small
+        if (newScale.Z < 0)
+            newScale.Z = 0.1f;
 
-        // Convert diameters to radii and height to half height -- the way Bullet expects it.
-        Scale = newScale / 2f;
+        return newScale;
     }
 
     // set _avatarVolume and _mass based on capsule size, _density and Scale
@@ -639,14 +828,14 @@ public sealed class BSCharacter : BSPhysObject
     {
         _avatarVolume = (float)(
                         Math.PI
-                        * Scale.X
-                        * Scale.Y    // the area of capsule cylinder
-                        * Scale.Z    // times height of capsule cylinder
+                        * Size.X / 2f
+                        * Size.Y / 2f    // the area of capsule cylinder
+                        * Size.Z         // times height of capsule cylinder
                       + 1.33333333f
                         * Math.PI
-                        * Scale.X
-                        * Math.Min(Scale.X, Scale.Y)
-                        * Scale.Y    // plus the volume of the capsule end caps
+                        * Size.X / 2f
+                        * Math.Min(Size.X, Size.Y) / 2
+                        * Size.Y / 2f    // plus the volume of the capsule end caps
                         );
         _mass = _avatarDensity * _avatarVolume;
     }
@@ -660,6 +849,7 @@ public sealed class BSCharacter : BSPhysObject
         _velocity = entprop.Velocity;
         _acceleration = entprop.Acceleration;
         _rotationalVelocity = entprop.RotationalVelocity;
+
         // Do some sanity checking for the avatar. Make sure it's above ground and inbounds.
         PositionSanityCheck(true);
 
@@ -667,17 +857,8 @@ public sealed class BSCharacter : BSPhysObject
         LastEntityProperties = CurrentEntityProperties;
         CurrentEntityProperties = entprop;
 
-        if (entprop.Velocity != LastEntityProperties.Velocity)
-        {
-            // Changes in the velocity are suppressed in avatars.
-            // That's just the way they are defined.
-            OMV.Vector3 avVel = new OMV.Vector3(_appliedVelocity.X, _appliedVelocity.Y, entprop.Velocity.Z);
-            _velocity = avVel;
-            BulletSimAPI.SetLinearVelocity2(PhysBody.ptr, avVel);
-        }
-
         // Tell the linkset about value changes
-        Linkset.UpdateProperties(this);
+        Linkset.UpdateProperties(this, true);
 
         // Avatars don't report their changes the usual way. Changes are checked for in the heartbeat loop.
         // base.RequestPhysicsterseUpdate();
diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSConstraint.cs b/OpenSim/Region/Physics/BulletSPlugin/BSConstraint.cs
index 65fac00..b813974 100755
--- a/OpenSim/Region/Physics/BulletSPlugin/BSConstraint.cs
+++ b/OpenSim/Region/Physics/BulletSPlugin/BSConstraint.cs
@@ -36,7 +36,8 @@ public abstract class BSConstraint : IDisposable
 {
     private static string LogHeader = "[BULLETSIM CONSTRAINT]";
 
-    protected BulletSim m_world;
+    protected BulletWorld m_world;
+    protected BSScene PhysicsScene;
     protected BulletBody m_body1;
     protected BulletBody m_body2;
     protected BulletConstraint m_constraint;
@@ -48,8 +49,10 @@ public abstract class BSConstraint : IDisposable
     public abstract ConstraintType Type { get; }
     public bool IsEnabled { get { return m_enabled; } }
 
-    public BSConstraint()
+    public BSConstraint(BulletWorld world)
     {
+        m_world = world;
+        PhysicsScene = m_world.physicsScene;
     }
 
     public virtual void Dispose()
@@ -57,15 +60,15 @@ public abstract class BSConstraint : IDisposable
         if (m_enabled)
         {
             m_enabled = false;
-            if (m_constraint.ptr != IntPtr.Zero)
+            if (m_constraint.HasPhysicalConstraint)
             {
-                bool success = BulletSimAPI.DestroyConstraint2(m_world.ptr, m_constraint.ptr);
+                bool success = PhysicsScene.PE.DestroyConstraint(m_world, m_constraint);
                 m_world.physicsScene.DetailLog("{0},BSConstraint.Dispose,taint,id1={1},body1={2},id2={3},body2={4},success={5}",
                                     BSScene.DetailLogZero,
-                                    m_body1.ID, m_body1.ptr.ToString("X"),
-                                    m_body2.ID, m_body2.ptr.ToString("X"),
+                                    m_body1.ID, m_body1.AddrString,
+                                    m_body2.ID, m_body2.AddrString,
                                     success);
-                m_constraint.ptr = System.IntPtr.Zero;
+                m_constraint.Clear();
             }
         }
     }
@@ -74,7 +77,7 @@ public abstract class BSConstraint : IDisposable
     {
         bool ret = false;
         if (m_enabled)
-            ret = BulletSimAPI.SetLinearLimits2(m_constraint.ptr, low, high);
+            ret = PhysicsScene.PE.SetLinearLimits(m_constraint, low, high);
         return ret;
     }
 
@@ -82,7 +85,7 @@ public abstract class BSConstraint : IDisposable
     {
         bool ret = false;
         if (m_enabled)
-            ret = BulletSimAPI.SetAngularLimits2(m_constraint.ptr, low, high);
+            ret = PhysicsScene.PE.SetAngularLimits(m_constraint, low, high);
         return ret;
     }
 
@@ -91,7 +94,7 @@ public abstract class BSConstraint : IDisposable
         bool ret = false;
         if (m_enabled)
         {
-            BulletSimAPI.SetConstraintNumSolverIterations2(m_constraint.ptr, cnt);
+            PhysicsScene.PE.SetConstraintNumSolverIterations(m_constraint, cnt);
             ret = true;
         }
         return ret;
@@ -103,7 +106,7 @@ public abstract class BSConstraint : IDisposable
         if (m_enabled)
         {
             // Recompute the internal transforms
-            BulletSimAPI.CalculateTransforms2(m_constraint.ptr);
+            PhysicsScene.PE.CalculateTransforms(m_constraint);
             ret = true;
         }
         return ret;
@@ -122,7 +125,7 @@ public abstract class BSConstraint : IDisposable
                 // Setting an object's mass to zero (making it static like when it's selected)
                 //     automatically disables the constraints.
                 // If the link is enabled, be sure to set the constraint itself to enabled.
-                BulletSimAPI.SetConstraintEnable2(m_constraint.ptr, m_world.physicsScene.NumericBool(true));
+                PhysicsScene.PE.SetConstraintEnable(m_constraint, BSParam.NumericBool(true));
             }
             else
             {
diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSConstraint6Dof.cs b/OpenSim/Region/Physics/BulletSPlugin/BSConstraint6Dof.cs
index 23ef052..ecb1b32 100755
--- a/OpenSim/Region/Physics/BulletSPlugin/BSConstraint6Dof.cs
+++ b/OpenSim/Region/Physics/BulletSPlugin/BSConstraint6Dof.cs
@@ -39,51 +39,49 @@ public sealed class BSConstraint6Dof : BSConstraint
     public override ConstraintType Type { get { return ConstraintType.D6_CONSTRAINT_TYPE; } }
 
     // Create a btGeneric6DofConstraint
-    public BSConstraint6Dof(BulletSim world, BulletBody obj1, BulletBody obj2,
+    public BSConstraint6Dof(BulletWorld world, BulletBody obj1, BulletBody obj2,
                     Vector3 frame1, Quaternion frame1rot,
                     Vector3 frame2, Quaternion frame2rot,
                     bool useLinearReferenceFrameA, bool disableCollisionsBetweenLinkedBodies)
+        : base(world)
     {
-        m_world = world;
         m_body1 = obj1;
         m_body2 = obj2;
-        m_constraint = new BulletConstraint(
-                            BulletSimAPI.Create6DofConstraint2(m_world.ptr, m_body1.ptr, m_body2.ptr,
+        m_constraint = PhysicsScene.PE.Create6DofConstraint(m_world, m_body1, m_body2,
                                 frame1, frame1rot,
                                 frame2, frame2rot,
-                                useLinearReferenceFrameA, disableCollisionsBetweenLinkedBodies));
+                                useLinearReferenceFrameA, disableCollisionsBetweenLinkedBodies);
         m_enabled = true;
         world.physicsScene.DetailLog("{0},BS6DofConstraint,createFrame,wID={1}, rID={2}, rBody={3}, cID={4}, cBody={5}",
                             BSScene.DetailLogZero, world.worldID,
-                            obj1.ID, obj1.ptr.ToString("X"), obj2.ID, obj2.ptr.ToString("X"));
+                            obj1.ID, obj1.AddrString, obj2.ID, obj2.AddrString);
     }
 
-    public BSConstraint6Dof(BulletSim world, BulletBody obj1, BulletBody obj2,
+    public BSConstraint6Dof(BulletWorld world, BulletBody obj1, BulletBody obj2,
                     Vector3 joinPoint,
                     bool useLinearReferenceFrameA, bool disableCollisionsBetweenLinkedBodies)
+        : base(world)
     {
-        m_world = world;
         m_body1 = obj1;
         m_body2 = obj2;
-        if (obj1.ptr == IntPtr.Zero || obj2.ptr == IntPtr.Zero)
+        if (!obj1.HasPhysicalBody || !obj2.HasPhysicalBody)
         {
             world.physicsScene.DetailLog("{0},BS6DOFConstraint,badBodyPtr,wID={1}, rID={2}, rBody={3}, cID={4}, cBody={5}",
                             BSScene.DetailLogZero, world.worldID,
-                            obj1.ID, obj1.ptr.ToString("X"), obj2.ID, obj2.ptr.ToString("X"));
+                            obj1.ID, obj1.AddrString, obj2.ID, obj2.AddrString);
             world.physicsScene.Logger.ErrorFormat("{0} Attempt to build 6DOF constraint with missing bodies: wID={1}, rID={2}, rBody={3}, cID={4}, cBody={5}",
-                            LogHeader, world.worldID, obj1.ID, obj1.ptr.ToString("X"), obj2.ID, obj2.ptr.ToString("X"));
+                            LogHeader, world.worldID, obj1.ID, obj1.AddrString, obj2.ID, obj2.AddrString);
             m_enabled = false;
         }
         else
         {
-            m_constraint = new BulletConstraint(
-                                BulletSimAPI.Create6DofConstraintToPoint2(m_world.ptr, m_body1.ptr, m_body2.ptr,
+            m_constraint = PhysicsScene.PE.Create6DofConstraintToPoint(m_world, m_body1, m_body2,
                                     joinPoint,
-                                    useLinearReferenceFrameA, disableCollisionsBetweenLinkedBodies));
-            world.physicsScene.DetailLog("{0},BS6DofConstraint,createMidPoint,wID={1}, csrt={2}, rID={3}, rBody={4}, cID={5}, cBody={6}",
-                                BSScene.DetailLogZero, world.worldID, m_constraint.ptr.ToString("X"),
-                                obj1.ID, obj1.ptr.ToString("X"), obj2.ID, obj2.ptr.ToString("X"));
-            if (m_constraint.ptr == IntPtr.Zero)
+                                    useLinearReferenceFrameA, disableCollisionsBetweenLinkedBodies);
+            PhysicsScene.DetailLog("{0},BS6DofConstraint,createMidPoint,wID={1}, csrt={2}, rID={3}, rBody={4}, cID={5}, cBody={6}",
+                                BSScene.DetailLogZero, world.worldID, m_constraint.AddrString,
+                                obj1.ID, obj1.AddrString, obj2.ID, obj2.AddrString);
+            if (!m_constraint.HasPhysicalConstraint)
             {
                 world.physicsScene.Logger.ErrorFormat("{0} Failed creation of 6Dof constraint. rootID={1}, childID={2}",
                                 LogHeader, obj1.ID, obj2.ID);
@@ -101,7 +99,7 @@ public sealed class BSConstraint6Dof : BSConstraint
         bool ret = false;
         if (m_enabled)
         {
-            BulletSimAPI.SetFrames2(m_constraint.ptr, frameA, frameArot, frameB, frameBrot);
+            PhysicsScene.PE.SetFrames(m_constraint, frameA, frameArot, frameB, frameBrot);
             ret = true;
         }
         return ret;
@@ -112,9 +110,9 @@ public sealed class BSConstraint6Dof : BSConstraint
         bool ret = false;
         if (m_enabled)
         {
-            BulletSimAPI.SetConstraintParam2(m_constraint.ptr, ConstraintParams.BT_CONSTRAINT_STOP_CFM, cfm, ConstraintParamAxis.AXIS_ALL);
-            BulletSimAPI.SetConstraintParam2(m_constraint.ptr, ConstraintParams.BT_CONSTRAINT_STOP_ERP, erp, ConstraintParamAxis.AXIS_ALL);
-            BulletSimAPI.SetConstraintParam2(m_constraint.ptr, ConstraintParams.BT_CONSTRAINT_CFM, cfm, ConstraintParamAxis.AXIS_ALL);
+            PhysicsScene.PE.SetConstraintParam(m_constraint, ConstraintParams.BT_CONSTRAINT_STOP_CFM, cfm, ConstraintParamAxis.AXIS_ALL);
+            PhysicsScene.PE.SetConstraintParam(m_constraint, ConstraintParams.BT_CONSTRAINT_STOP_ERP, erp, ConstraintParamAxis.AXIS_ALL);
+            PhysicsScene.PE.SetConstraintParam(m_constraint, ConstraintParams.BT_CONSTRAINT_CFM, cfm, ConstraintParamAxis.AXIS_ALL);
             ret = true;
         }
         return ret;
@@ -125,7 +123,7 @@ public sealed class BSConstraint6Dof : BSConstraint
         bool ret = false;
         float onOff = useOffset ? ConfigurationParameters.numericTrue : ConfigurationParameters.numericFalse;
         if (m_enabled)
-            ret = BulletSimAPI.UseFrameOffset2(m_constraint.ptr, onOff);
+            ret = PhysicsScene.PE.UseFrameOffset(m_constraint, onOff);
         return ret;
     }
 
@@ -135,7 +133,7 @@ public sealed class BSConstraint6Dof : BSConstraint
         float onOff = enable ? ConfigurationParameters.numericTrue : ConfigurationParameters.numericFalse;
         if (m_enabled)
         {
-            ret = BulletSimAPI.TranslationalLimitMotor2(m_constraint.ptr, onOff, targetVelocity, maxMotorForce);
+            ret = PhysicsScene.PE.TranslationalLimitMotor(m_constraint, onOff, targetVelocity, maxMotorForce);
             m_world.physicsScene.DetailLog("{0},BS6DOFConstraint,TransLimitMotor,enable={1},vel={2},maxForce={3}",
                             BSScene.DetailLogZero, enable, targetVelocity, maxMotorForce);
         }
@@ -146,7 +144,7 @@ public sealed class BSConstraint6Dof : BSConstraint
     {
         bool ret = false;
         if (m_enabled)
-            ret = BulletSimAPI.SetBreakingImpulseThreshold2(m_constraint.ptr, threshold);
+            ret = PhysicsScene.PE.SetBreakingImpulseThreshold(m_constraint, threshold);
         return ret;
     }
 }
diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSConstraintCollection.cs b/OpenSim/Region/Physics/BulletSPlugin/BSConstraintCollection.cs
index a9fd826..2aeff25 100755
--- a/OpenSim/Region/Physics/BulletSPlugin/BSConstraintCollection.cs
+++ b/OpenSim/Region/Physics/BulletSPlugin/BSConstraintCollection.cs
@@ -41,9 +41,9 @@ public sealed class BSConstraintCollection : IDisposable
     delegate bool ConstraintAction(BSConstraint constrain);
 
     private List<BSConstraint> m_constraints;
-    private BulletSim m_world;
+    private BulletWorld m_world;
 
-    public BSConstraintCollection(BulletSim world)
+    public BSConstraintCollection(BulletWorld world)
     {
         m_world = world;
         m_constraints = new List<BSConstraint>();
diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSConstraintHinge.cs b/OpenSim/Region/Physics/BulletSPlugin/BSConstraintHinge.cs
index ed3ffa7..7714a03 100755
--- a/OpenSim/Region/Physics/BulletSPlugin/BSConstraintHinge.cs
+++ b/OpenSim/Region/Physics/BulletSPlugin/BSConstraintHinge.cs
@@ -36,19 +36,17 @@ public sealed class BSConstraintHinge : BSConstraint
 {
     public override ConstraintType Type { get { return ConstraintType.HINGE_CONSTRAINT_TYPE; } }
 
-    public BSConstraintHinge(BulletSim world, BulletBody obj1, BulletBody obj2,
+    public BSConstraintHinge(BulletWorld world, BulletBody obj1, BulletBody obj2,
                     Vector3 pivotInA, Vector3 pivotInB,
                     Vector3 axisInA, Vector3 axisInB,
                     bool useLinearReferenceFrameA, bool disableCollisionsBetweenLinkedBodies)
+        : base(world)
     {
-        m_world = world;
         m_body1 = obj1;
         m_body2 = obj2;
-        m_constraint = new BulletConstraint(
-                            BulletSimAPI.CreateHingeConstraint2(m_world.ptr, m_body1.ptr, m_body2.ptr,
-                                pivotInA, pivotInB,
-                                axisInA, axisInB,
-                                useLinearReferenceFrameA, disableCollisionsBetweenLinkedBodies));
+        m_constraint = PhysicsScene.PE.CreateHingeConstraint(world, obj1, obj2,
+                                pivotInA, pivotInB, axisInA, axisInB, 
+                                useLinearReferenceFrameA, disableCollisionsBetweenLinkedBodies);
         m_enabled = true;
     }
 
diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSDynamics.cs b/OpenSim/Region/Physics/BulletSPlugin/BSDynamics.cs
index dbc9039..c34c05a 100644
--- a/OpenSim/Region/Physics/BulletSPlugin/BSDynamics.cs
+++ b/OpenSim/Region/Physics/BulletSPlugin/BSDynamics.cs
@@ -24,30 +24,17 @@
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
-
-/* RA: June 14, 2011. Copied from ODEDynamics.cs and converted to
- * call the BulletSim system.
- */
-/* Revised Aug, Sept 2009 by Kitto Flora. ODEDynamics.cs replaces
- * ODEVehicleSettings.cs. It and ODEPrim.cs are re-organised:
- * ODEPrim.cs contains methods dealing with Prim editing, Prim
- * characteristics and Kinetic motion.
- * ODEDynamics.cs contains methods dealing with Prim Physical motion
- * (dynamics) and the associated settings. Old Linear and angular
- * motors for dynamic motion have been replace with  MoveLinear()
- * and MoveAngular(); 'Physical' is used only to switch ODE dynamic
- * simualtion on/off; VEHICAL_TYPE_NONE/VEHICAL_TYPE_<other> is to
- * switch between 'VEHICLE' parameter use and general dynamics
- * settings use.
+ * The quotations from http://wiki.secondlife.com/wiki/Linden_Vehicle_Tutorial
+ * are Copyright (c) 2009 Linden Research, Inc and are used under their license
+ * of Creative Commons Attribution-Share Alike 3.0
+ * (http://creativecommons.org/licenses/by-sa/3.0/).
  */
 
 using System;
 using System.Collections.Generic;
 using System.Reflection;
 using System.Runtime.InteropServices;
-using log4net;
 using OpenMetaverse;
-using OpenSim.Framework;
 using OpenSim.Region.Physics.Manager;
 
 namespace OpenSim.Region.Physics.BulletSPlugin
@@ -80,10 +67,10 @@ namespace OpenSim.Region.Physics.BulletSPlugin
         private Quaternion m_referenceFrame = Quaternion.Identity;
 
         // Linear properties
+        private BSVMotor m_linearMotor = new BSVMotor("LinearMotor");
         private Vector3 m_linearMotorDirection = Vector3.Zero;          // velocity requested by LSL, decayed by time
         private Vector3 m_linearMotorOffset = Vector3.Zero;             // the point of force can be offset from the center
         private Vector3 m_linearMotorDirectionLASTSET = Vector3.Zero;   // velocity requested by LSL
-        private Vector3 m_newVelocity = Vector3.Zero;                   // velocity computed to be applied to body
         private Vector3 m_linearFrictionTimescale = Vector3.Zero;
         private float m_linearMotorDecayTimescale = 0;
         private float m_linearMotorTimescale = 0;
@@ -93,16 +80,18 @@ namespace OpenSim.Region.Physics.BulletSPlugin
         // private Vector3 m_linearMotorOffset = Vector3.Zero;
 
         //Angular properties
+        private BSVMotor m_angularMotor = new BSVMotor("AngularMotor");
         private Vector3 m_angularMotorDirection = Vector3.Zero;         // angular velocity requested by LSL motor
         // private int m_angularMotorApply = 0;                            // application frame counter
         private Vector3 m_angularMotorVelocity = Vector3.Zero;          // current angular motor velocity
         private float m_angularMotorTimescale = 0;                      // motor angular velocity ramp up rate
         private float m_angularMotorDecayTimescale = 0;                 // motor angular velocity decay rate
         private Vector3 m_angularFrictionTimescale = Vector3.Zero;      // body angular velocity  decay rate
-        private Vector3 m_lastAngularVelocity = Vector3.Zero;           // what was last applied to body
+        private Vector3 m_lastAngularVelocity = Vector3.Zero;
         private Vector3 m_lastVertAttractor = Vector3.Zero;             // what VA was last applied to body
 
         //Deflection properties
+        private BSVMotor m_angularDeflectionMotor = new BSVMotor("AngularDeflection");
         private float m_angularDeflectionEfficiency = 0;
         private float m_angularDeflectionTimescale = 0;
         private float m_linearDeflectionEfficiency = 0;
@@ -114,6 +103,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin
         private float m_bankingTimescale = 0;
 
         //Hover and Buoyancy properties
+        private BSVMotor m_hoverMotor = new BSVMotor("Hover");
         private float m_VhoverHeight = 0f;
         private float m_VhoverEfficiency = 0f;
         private float m_VhoverTimescale = 0f;
@@ -124,8 +114,15 @@ namespace OpenSim.Region.Physics.BulletSPlugin
                     // Therefore only m_VehicleBuoyancy=1 (0g) will use the script-requested .Z velocity.
 
         //Attractor properties
-        private float m_verticalAttractionEfficiency = 1.0f;        // damped
-        private float m_verticalAttractionTimescale = 500f;         // Timescale > 300  means no vert attractor.
+        private BSVMotor m_verticalAttractionMotor = new BSVMotor("VerticalAttraction");
+        private float m_verticalAttractionEfficiency = 1.0f; // damped
+        private float m_verticalAttractionCutoff = 500f;     // per the documentation
+        // Timescale > cutoff  means no vert attractor.
+        private float m_verticalAttractionTimescale = 510f;
+
+        // Just some recomputed constants:
+        static readonly float PIOverFour = ((float)Math.PI) / 4f;
+        static readonly float PIOverTwo = ((float)Math.PI) / 2f;
 
         public BSDynamics(BSScene myScene, BSPrim myPrim)
         {
@@ -137,9 +134,10 @@ namespace OpenSim.Region.Physics.BulletSPlugin
         // Return 'true' if this vehicle is doing vehicle things
         public bool IsActive
         {
-            get { return Type != Vehicle.TYPE_NONE; }
+            get { return Type != Vehicle.TYPE_NONE && Prim.IsPhysical; }
         }
 
+        #region Vehicle parameter setting
         internal void ProcessFloatVehicleParam(Vehicle pParam, float pValue)
         {
             VDetailLog("{0},ProcessFloatVehicleParam,param={1},val={2}", Prim.LocalID, pParam, pValue);
@@ -152,13 +150,15 @@ namespace OpenSim.Region.Physics.BulletSPlugin
                     m_angularDeflectionTimescale = Math.Max(pValue, 0.01f);
                     break;
                 case Vehicle.ANGULAR_MOTOR_DECAY_TIMESCALE:
-                    m_angularMotorDecayTimescale = Math.Max(pValue, 0.01f);
+                    m_angularMotorDecayTimescale = ClampInRange(0.01f, pValue, 120);
+                    m_angularMotor.TargetValueDecayTimeScale = m_angularMotorDecayTimescale;
                     break;
                 case Vehicle.ANGULAR_MOTOR_TIMESCALE:
                     m_angularMotorTimescale = Math.Max(pValue, 0.01f);
+                    m_angularMotor.TimeScale = m_angularMotorTimescale;
                     break;
                 case Vehicle.BANKING_EFFICIENCY:
-                    m_bankingEfficiency = Math.Max(-1f, Math.Min(pValue, 1f));
+                    m_bankingEfficiency = ClampInRange(-1f, pValue, 1f);
                     break;
                 case Vehicle.BANKING_MIX:
                     m_bankingMix = Math.Max(pValue, 0.01f);
@@ -167,10 +167,10 @@ namespace OpenSim.Region.Physics.BulletSPlugin
                     m_bankingTimescale = Math.Max(pValue, 0.01f);
                     break;
                 case Vehicle.BUOYANCY:
-                    m_VehicleBuoyancy = Math.Max(-1f, Math.Min(pValue, 1f));
+                    m_VehicleBuoyancy = ClampInRange(-1f, pValue, 1f);
                     break;
                 case Vehicle.HOVER_EFFICIENCY:
-                    m_VhoverEfficiency = Math.Max(0f, Math.Min(pValue, 1f));
+                    m_VhoverEfficiency = ClampInRange(0f, pValue, 1f);
                     break;
                 case Vehicle.HOVER_HEIGHT:
                     m_VhoverHeight = pValue;
@@ -185,33 +185,40 @@ namespace OpenSim.Region.Physics.BulletSPlugin
                     m_linearDeflectionTimescale = Math.Max(pValue, 0.01f);
                     break;
                 case Vehicle.LINEAR_MOTOR_DECAY_TIMESCALE:
-                    m_linearMotorDecayTimescale = Math.Max(pValue, 0.01f);
+                    m_linearMotorDecayTimescale = ClampInRange(0.01f, pValue, 120);
+                    m_linearMotor.TargetValueDecayTimeScale = m_linearMotorDecayTimescale;
                     break;
                 case Vehicle.LINEAR_MOTOR_TIMESCALE:
                     m_linearMotorTimescale = Math.Max(pValue, 0.01f);
+                    m_linearMotor.TimeScale = m_linearMotorTimescale;
                     break;
                 case Vehicle.VERTICAL_ATTRACTION_EFFICIENCY:
-                    m_verticalAttractionEfficiency = Math.Max(0.1f, Math.Min(pValue, 1f));
+                    m_verticalAttractionEfficiency = ClampInRange(0.1f, pValue, 1f);
+                    m_verticalAttractionMotor.Efficiency = m_verticalAttractionEfficiency;
                     break;
                 case Vehicle.VERTICAL_ATTRACTION_TIMESCALE:
                     m_verticalAttractionTimescale = Math.Max(pValue, 0.01f);
+                    m_verticalAttractionMotor.TimeScale = m_verticalAttractionTimescale;
                     break;
 
                 // These are vector properties but the engine lets you use a single float value to
                 // set all of the components to the same value
                 case Vehicle.ANGULAR_FRICTION_TIMESCALE:
                     m_angularFrictionTimescale = new Vector3(pValue, pValue, pValue);
+                    m_angularMotor.FrictionTimescale = m_angularFrictionTimescale;
                     break;
                 case Vehicle.ANGULAR_MOTOR_DIRECTION:
                     m_angularMotorDirection = new Vector3(pValue, pValue, pValue);
-                    // m_angularMotorApply = 100;
+                    m_angularMotor.SetTarget(m_angularMotorDirection);
                     break;
                 case Vehicle.LINEAR_FRICTION_TIMESCALE:
                     m_linearFrictionTimescale = new Vector3(pValue, pValue, pValue);
+                    m_linearMotor.FrictionTimescale = m_linearFrictionTimescale;
                     break;
                 case Vehicle.LINEAR_MOTOR_DIRECTION:
                     m_linearMotorDirection = new Vector3(pValue, pValue, pValue);
                     m_linearMotorDirectionLASTSET = new Vector3(pValue, pValue, pValue);
+                    m_linearMotor.SetTarget(m_linearMotorDirection);
                     break;
                 case Vehicle.LINEAR_MOTOR_OFFSET:
                     m_linearMotorOffset = new Vector3(pValue, pValue, pValue);
@@ -227,21 +234,24 @@ namespace OpenSim.Region.Physics.BulletSPlugin
             {
                 case Vehicle.ANGULAR_FRICTION_TIMESCALE:
                     m_angularFrictionTimescale = new Vector3(pValue.X, pValue.Y, pValue.Z);
+                    m_angularMotor.FrictionTimescale = m_angularFrictionTimescale;
                     break;
                 case Vehicle.ANGULAR_MOTOR_DIRECTION:
                     // Limit requested angular speed to 2 rps= 4 pi rads/sec
-                    pValue.X = Math.Max(-12.56f, Math.Min(pValue.X, 12.56f));
-                    pValue.Y = Math.Max(-12.56f, Math.Min(pValue.Y, 12.56f));
-                    pValue.Z = Math.Max(-12.56f, Math.Min(pValue.Z, 12.56f));
+                    pValue.X = ClampInRange(-12.56f, pValue.X, 12.56f);
+                    pValue.Y = ClampInRange(-12.56f, pValue.Y, 12.56f);
+                    pValue.Z = ClampInRange(-12.56f, pValue.Z, 12.56f);
                     m_angularMotorDirection = new Vector3(pValue.X, pValue.Y, pValue.Z);
-                    // m_angularMotorApply = 100;
+                    m_angularMotor.SetTarget(m_angularMotorDirection);
                     break;
                 case Vehicle.LINEAR_FRICTION_TIMESCALE:
                     m_linearFrictionTimescale = new Vector3(pValue.X, pValue.Y, pValue.Z);
+                    m_linearMotor.FrictionTimescale = m_linearFrictionTimescale;
                     break;
                 case Vehicle.LINEAR_MOTOR_DIRECTION:
                     m_linearMotorDirection = new Vector3(pValue.X, pValue.Y, pValue.Z);
                     m_linearMotorDirectionLASTSET = new Vector3(pValue.X, pValue.Y, pValue.Z);
+                    m_linearMotor.SetTarget(m_linearMotorDirection);
                     break;
                 case Vehicle.LINEAR_MOTOR_OFFSET:
                     m_linearMotorOffset = new Vector3(pValue.X, pValue.Y, pValue.Z);
@@ -303,7 +313,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin
                     m_VhoverEfficiency = 0;
                     m_VhoverTimescale = 0;
                     m_VehicleBuoyancy = 0;
-                    
+
                     m_linearDeflectionEfficiency = 1;
                     m_linearDeflectionTimescale = 1;
 
@@ -319,6 +329,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin
 
                     m_referenceFrame = Quaternion.Identity;
                     m_flags = (VehicleFlag)0;
+
                     break;
 
                 case Vehicle.TYPE_SLED:
@@ -351,10 +362,14 @@ namespace OpenSim.Region.Physics.BulletSPlugin
                     m_bankingMix = 1;
 
                     m_referenceFrame = Quaternion.Identity;
-                    m_flags |= (VehicleFlag.NO_DEFLECTION_UP | VehicleFlag.LIMIT_ROLL_ONLY | VehicleFlag.LIMIT_MOTOR_UP);
-                    m_flags &=
-                         ~(VehicleFlag.HOVER_WATER_ONLY | VehicleFlag.HOVER_TERRAIN_ONLY |
-                           VehicleFlag.HOVER_GLOBAL_HEIGHT | VehicleFlag.HOVER_UP_ONLY);
+                    m_flags &= ~(VehicleFlag.HOVER_WATER_ONLY
+                                | VehicleFlag.HOVER_TERRAIN_ONLY
+                                | VehicleFlag.HOVER_GLOBAL_HEIGHT
+                                | VehicleFlag.HOVER_UP_ONLY);
+                    m_flags |= (VehicleFlag.NO_DEFLECTION_UP
+                            | VehicleFlag.LIMIT_ROLL_ONLY
+                            | VehicleFlag.LIMIT_MOTOR_UP);
+
                     break;
                 case Vehicle.TYPE_CAR:
                     m_linearMotorDirection = Vector3.Zero;
@@ -498,6 +513,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin
                     m_bankingEfficiency = 0;
                     m_bankingMix = 0.7f;
                     m_bankingTimescale = 5;
+
                     m_referenceFrame = Quaternion.Identity;
 
                     m_referenceFrame = Quaternion.Identity;
@@ -510,7 +526,28 @@ namespace OpenSim.Region.Physics.BulletSPlugin
                                     | VehicleFlag.HOVER_GLOBAL_HEIGHT);
                     break;
             }
+
+            // Update any physical parameters based on this type.
+            Refresh();
+
+            m_linearMotor = new BSVMotor("LinearMotor", m_linearMotorTimescale,
+                                m_linearMotorDecayTimescale, m_linearFrictionTimescale,
+                                1f);
+            m_linearMotor.PhysicsScene = PhysicsScene;  // DEBUG DEBUG DEBUG (enables detail logging)
+
+            m_angularMotor = new BSVMotor("AngularMotor", m_angularMotorTimescale,
+                                m_angularMotorDecayTimescale, m_angularFrictionTimescale,
+                                1f);
+            m_angularMotor.PhysicsScene = PhysicsScene;  // DEBUG DEBUG DEBUG (enables detail logging)
+
+            m_verticalAttractionMotor = new BSVMotor("VerticalAttraction", m_verticalAttractionTimescale,
+                                BSMotor.Infinite, BSMotor.InfiniteVector,
+                                m_verticalAttractionEfficiency);
+            // Z goes away and we keep X and Y
+            m_verticalAttractionMotor.FrictionTimescale = new Vector3(BSMotor.Infinite, BSMotor.Infinite, 0.1f);
+            m_verticalAttractionMotor.PhysicsScene = PhysicsScene;  // DEBUG DEBUG DEBUG (enables detail logging)
         }
+        #endregion // Vehicle parameter setting
 
         // Some of the properties of this prim may have changed.
         // Do any updating needed for a vehicle
@@ -518,13 +555,35 @@ namespace OpenSim.Region.Physics.BulletSPlugin
         {
             if (IsActive)
             {
-                // Friction effects are handled by this vehicle code
-                BulletSimAPI.SetFriction2(Prim.PhysBody.ptr, 0f);
-                BulletSimAPI.SetHitFraction2(Prim.PhysBody.ptr, 0f);
+                // Remember the mass so we don't have to fetch it every step
+                m_vehicleMass = Prim.Linkset.LinksetMass;
 
-                // BulletSimAPI.SetAngularDamping2(Prim.PhysBody.ptr, 0.8f);
+                // Friction affects are handled by this vehicle code
+                float friction = 0f;
+                PhysicsScene.PE.SetFriction(Prim.PhysBody, friction);
 
-                VDetailLog("{0},BSDynamics.Refresh,zeroingFriction and adding damping", Prim.LocalID);
+                // Moderate angular movement introduced by Bullet.
+                // TODO: possibly set AngularFactor and LinearFactor for the type of vehicle.
+                //     Maybe compute linear and angular factor and damping from params.
+                float angularDamping = BSParam.VehicleAngularDamping;
+                PhysicsScene.PE.SetAngularDamping(Prim.PhysBody, angularDamping);
+
+                // Vehicles report collision events so we know when it's on the ground
+                PhysicsScene.PE.AddToCollisionFlags(Prim.PhysBody, CollisionFlags.BS_VEHICLE_COLLISIONS);
+
+                Vector3 localInertia = PhysicsScene.PE.CalculateLocalInertia(Prim.PhysShape, m_vehicleMass);
+                PhysicsScene.PE.SetMassProps(Prim.PhysBody, m_vehicleMass, localInertia);
+                PhysicsScene.PE.UpdateInertiaTensor(Prim.PhysBody);
+
+                Vector3 grav = PhysicsScene.DefaultGravity * (1f - Prim.Buoyancy);
+                PhysicsScene.PE.SetGravity(Prim.PhysBody, grav);
+
+                VDetailLog("{0},BSDynamics.Refresh,mass={1},frict={2},inert={3},aDamp={4}",
+                                Prim.LocalID, m_vehicleMass, friction, localInertia, angularDamping);
+            }
+            else
+            {
+                PhysicsScene.PE.RemoveFromCollisionFlags(Prim.PhysBody, CollisionFlags.BS_VEHICLE_COLLISIONS);
             }
         }
 
@@ -546,116 +605,343 @@ namespace OpenSim.Region.Physics.BulletSPlugin
             Refresh();
         }
 
+        #region Known vehicle value functions
+        // Vehicle physical parameters that we buffer from constant getting and setting.
+        // The "m_known*" values are unknown until they are fetched and the m_knownHas flag is set.
+        //      Changing is remembered and the parameter is stored back into the physics engine only if updated.
+        //      This does two things: 1) saves continuious calls into unmanaged code, and
+        //      2) signals when a physics property update must happen back to the simulator
+        //      to update values modified for the vehicle.
+        private int m_knownChanged;
+        private int m_knownHas;
+        private float m_knownTerrainHeight;
+        private float m_knownWaterLevel;
+        private Vector3 m_knownPosition;
+        private Vector3 m_knownVelocity;
+        private Vector3 m_knownForce;
+        private Quaternion m_knownOrientation;
+        private Vector3 m_knownRotationalVelocity;
+        private Vector3 m_knownRotationalForce;
+        private Vector3 m_knownForwardVelocity;    // vehicle relative forward speed
+
+        private const int m_knownChangedPosition           = 1 << 0;
+        private const int m_knownChangedVelocity           = 1 << 1;
+        private const int m_knownChangedForce              = 1 << 2;
+        private const int m_knownChangedOrientation        = 1 << 3;
+        private const int m_knownChangedRotationalVelocity = 1 << 4;
+        private const int m_knownChangedRotationalForce    = 1 << 5;
+        private const int m_knownChangedTerrainHeight      = 1 << 6;
+        private const int m_knownChangedWaterLevel         = 1 << 7;
+        private const int m_knownChangedForwardVelocity    = 1 << 8;
+
+        private void ForgetKnownVehicleProperties()
+        {
+            m_knownHas = 0;
+            m_knownChanged = 0;
+        }
+        // Push all the changed values back into the physics engine
+        private void PushKnownChanged()
+        {
+            if (m_knownChanged != 0)
+            {
+                if ((m_knownChanged & m_knownChangedPosition) != 0)
+                    Prim.ForcePosition = m_knownPosition;
+
+                if ((m_knownChanged & m_knownChangedOrientation) != 0)
+                    Prim.ForceOrientation = m_knownOrientation;
+
+                if ((m_knownChanged & m_knownChangedVelocity) != 0)
+                {
+                    Prim.ForceVelocity = m_knownVelocity;
+                    PhysicsScene.PE.SetInterpolationLinearVelocity(Prim.PhysBody, VehicleVelocity);
+                }
+
+                if ((m_knownChanged & m_knownChangedForce) != 0)
+                    Prim.AddForce((Vector3)m_knownForce, false, true);
+
+                if ((m_knownChanged & m_knownChangedRotationalVelocity) != 0)
+                {
+                    Prim.ForceRotationalVelocity = m_knownRotationalVelocity;
+                    // Fake out Bullet by making it think the velocity is the same as last time.
+                    PhysicsScene.PE.SetInterpolationAngularVelocity(Prim.PhysBody, m_knownRotationalVelocity);
+                }
+
+                if ((m_knownChanged & m_knownChangedRotationalForce) != 0)
+                    Prim.AddAngularForce((Vector3)m_knownRotationalForce, false, true);
+
+                // If we set one of the values (ie, the physics engine didn't do it) we must force
+                //      an UpdateProperties event to send the changes up to the simulator.
+                PhysicsScene.PE.PushUpdate(Prim.PhysBody);
+            }
+            m_knownChanged = 0;
+        }
+
+        // Since the computation of terrain height can be a little involved, this routine
+        //    is used to fetch the height only once for each vehicle simulation step.
+        private float GetTerrainHeight(Vector3 pos)
+        {
+            if ((m_knownHas & m_knownChangedTerrainHeight) == 0)
+            {
+                m_knownTerrainHeight = Prim.PhysicsScene.TerrainManager.GetTerrainHeightAtXYZ(pos);
+                m_knownHas |= m_knownChangedTerrainHeight;
+            }
+            return m_knownTerrainHeight;
+        }
+
+        // Since the computation of water level can be a little involved, this routine
+        //    is used ot fetch the level only once for each vehicle simulation step.
+        private float GetWaterLevel(Vector3 pos)
+        {
+            if ((m_knownHas & m_knownChangedWaterLevel) == 0)
+            {
+                m_knownWaterLevel = Prim.PhysicsScene.TerrainManager.GetWaterLevelAtXYZ(pos);
+                m_knownHas |= m_knownChangedWaterLevel;
+            }
+            return (float)m_knownWaterLevel;
+        }
+
+        private Vector3 VehiclePosition
+        {
+            get
+            {
+                if ((m_knownHas & m_knownChangedPosition) == 0)
+                {
+                    m_knownPosition = Prim.ForcePosition;
+                    m_knownHas |= m_knownChangedPosition;
+                }
+                return m_knownPosition;
+            }
+            set
+            {
+                m_knownPosition = value;
+                m_knownChanged |= m_knownChangedPosition;
+                m_knownHas |= m_knownChangedPosition;
+            }
+        }
+
+        private Quaternion VehicleOrientation
+        {
+            get
+            {
+                if ((m_knownHas & m_knownChangedOrientation) == 0)
+                {
+                    m_knownOrientation = Prim.ForceOrientation;
+                    m_knownHas |= m_knownChangedOrientation;
+                }
+                return m_knownOrientation;
+            }
+            set
+            {
+                m_knownOrientation = value;
+                m_knownChanged |= m_knownChangedOrientation;
+                m_knownHas |= m_knownChangedOrientation;
+            }
+        }
+
+        private Vector3 VehicleVelocity
+        {
+            get
+            {
+                if ((m_knownHas & m_knownChangedVelocity) == 0)
+                {
+                    m_knownVelocity = Prim.ForceVelocity;
+                    m_knownHas |= m_knownChangedVelocity;
+                }
+                return (Vector3)m_knownVelocity;
+            }
+            set
+            {
+                m_knownVelocity = value;
+                m_knownChanged |= m_knownChangedVelocity;
+                m_knownHas |= m_knownChangedVelocity;
+            }
+        }
+
+        private void VehicleAddForce(Vector3 aForce)
+        {
+            if ((m_knownHas & m_knownChangedForce) == 0)
+            {
+                m_knownForce = Vector3.Zero;
+            }
+            m_knownForce += aForce;
+            m_knownChanged |= m_knownChangedForce;
+            m_knownHas |= m_knownChangedForce;
+        }
+
+        private Vector3 VehicleRotationalVelocity
+        {
+            get
+            {
+                if ((m_knownHas & m_knownChangedRotationalVelocity) == 0)
+                {
+                    m_knownRotationalVelocity = Prim.ForceRotationalVelocity;
+                    m_knownHas |= m_knownChangedRotationalVelocity;
+                }
+                return (Vector3)m_knownRotationalVelocity;
+            }
+            set
+            {
+                m_knownRotationalVelocity = value;
+                m_knownChanged |= m_knownChangedRotationalVelocity;
+                m_knownHas |= m_knownChangedRotationalVelocity;
+            }
+        }
+        private void VehicleAddAngularForce(Vector3 aForce)
+        {
+            if ((m_knownHas & m_knownChangedRotationalForce) == 0)
+            {
+                m_knownRotationalForce = Vector3.Zero;
+            }
+            m_knownRotationalForce += aForce;
+            m_knownChanged |= m_knownChangedRotationalForce;
+            m_knownHas |= m_knownChangedRotationalForce;
+        }
+        // Vehicle relative forward velocity
+        private Vector3 VehicleForwardVelocity
+        {
+            get
+            {
+                if ((m_knownHas & m_knownChangedForwardVelocity) == 0)
+                {
+                    m_knownForwardVelocity = VehicleVelocity * Quaternion.Inverse(Quaternion.Normalize(VehicleOrientation));
+                    m_knownHas |= m_knownChangedForwardVelocity;
+                }
+                return m_knownForwardVelocity;
+            }
+        }
+        private float VehicleForwardSpeed
+        {
+            get
+            {
+                return VehicleForwardVelocity.X;
+            }
+        }
+
+        #endregion // Known vehicle value functions
+
         // One step of the vehicle properties for the next 'pTimestep' seconds.
         internal void Step(float pTimestep)
         {
             if (!IsActive) return;
 
-            // DEBUG
-            // Because Bullet does apply forces to the vehicle, our last computed
-            //     linear and angular velocities are not what is happening now.
-            // Vector3 externalAngularVelocity = Prim.ForceRotationalVelocity - m_lastAngularVelocity;
-            // m_lastAngularVelocity += (externalAngularVelocity * 0.5f) * pTimestep;
-            // m_lastAngularVelocity = Prim.ForceRotationalVelocity;   // DEBUG: account for what Bullet did last time
-            // m_lastLinearVelocityVector = Prim.ForceVelocity * Quaternion.Inverse(Prim.ForceOrientation);        // DEBUG:
-            // END DEBUG
+            if (PhysicsScene.VehiclePhysicalLoggingEnabled)
+                PhysicsScene.PE.DumpRigidBody(PhysicsScene.World, Prim.PhysBody);
 
-            m_vehicleMass = Prim.Linkset.LinksetMass;
+            ForgetKnownVehicleProperties();
 
             MoveLinear(pTimestep);
-            // Commented out for debug
             MoveAngular(pTimestep);
-            // Prim.ApplyTorqueImpulse(-Prim.RotationalVelocity * m_vehicleMass, false);    // DEBUG DEBUG
-            // Prim.ForceRotationalVelocity = -Prim.RotationalVelocity;    // DEBUG DEBUG
 
             LimitRotation(pTimestep);
 
             // remember the position so next step we can limit absolute movement effects
-            m_lastPositionVector = Prim.ForcePosition;
-
-            VDetailLog("{0},BSDynamics.Step,frict={1},grav={2},inertia={3},mass={4}",        // DEBUG DEBUG
-                                    Prim.LocalID, 
-                                    BulletSimAPI.GetFriction2(Prim.PhysBody.ptr),
-                                    BulletSimAPI.GetGravity2(Prim.PhysBody.ptr),
-                                    Prim.Inertia,
-                                    m_vehicleMass
-                                    );
+            m_lastPositionVector = VehiclePosition;
+
+            // If we forced the changing of some vehicle parameters, update the values and
+            //      for the physics engine to note the changes so an UpdateProperties event will happen.
+            PushKnownChanged();
+
+            if (PhysicsScene.VehiclePhysicalLoggingEnabled)
+                PhysicsScene.PE.DumpRigidBody(PhysicsScene.World, Prim.PhysBody);
+
             VDetailLog("{0},BSDynamics.Step,done,pos={1},force={2},velocity={3},angvel={4}",
-                    Prim.LocalID, Prim.ForcePosition, Prim.Force, Prim.ForceVelocity, Prim.RotationalVelocity);
-        }// end Step
+                    Prim.LocalID, VehiclePosition, Prim.Force, VehicleVelocity, VehicleRotationalVelocity);
+        }
 
-        // Apply the effect of the linear motor.
-        // Also does hover and float.
+        // Apply the effect of the linear motor and other linear motions (like hover and float).
         private void MoveLinear(float pTimestep)
         {
-            // m_linearMotorDirection is the target direction we are moving relative to the vehicle coordinates
-            // m_lastLinearVelocityVector is the current speed we are moving in that direction
-            if (m_linearMotorDirection.LengthSquared() > 0.001f)
-            {
-                Vector3 origDir = m_linearMotorDirection;       // DEBUG
-                Vector3 origVel = m_lastLinearVelocityVector;   // DEBUG
-                // DEBUG: the vehicle velocity rotated to be relative to vehicle coordinates for comparison
-                Vector3 vehicleVelocity = Prim.ForceVelocity * Quaternion.Inverse(Prim.ForceOrientation);   // DEBUG
+            Vector3 linearMotorContribution = m_linearMotor.Step(pTimestep);
 
-                // Add (desiredVelocity - lastAppliedVelocity) / howLongItShouldTakeToComplete
-                Vector3 addAmount = (m_linearMotorDirection - m_lastLinearVelocityVector)/(m_linearMotorTimescale) * pTimestep;
-                m_lastLinearVelocityVector += addAmount;
+            // The movement computed in the linear motor is relative to the vehicle
+            //     coordinates. Rotate the movement to world coordinates.
+            linearMotorContribution *= VehicleOrientation;
+            // All the contributions after this are world relative (mostly Z modifications)
 
-                float decayFactor = (1.0f / m_linearMotorDecayTimescale) * pTimestep;
-                m_linearMotorDirection *= (1f - decayFactor);
+            // ==================================================================
+            // Buoyancy: force to overcome gravity.
+            // m_VehicleBuoyancy: -1=2g; 0=1g; 1=0g;
+            // So, if zero, don't change anything (let gravity happen). If one, negate the effect of gravity.
+            Vector3 buoyancyContribution =  Prim.PhysicsScene.DefaultGravity * m_VehicleBuoyancy;
 
-                // Rotate new object velocity from vehicle relative to world coordinates
-                m_newVelocity = m_lastLinearVelocityVector * Prim.ForceOrientation;
+            Vector3 terrainHeightContribution = ComputeLinearTerrainHeightCorrection(pTimestep);
 
-                // Apply friction for next time
-                Vector3 frictionFactor = (Vector3.One / m_linearFrictionTimescale) * pTimestep;
-                m_lastLinearVelocityVector *= (Vector3.One - frictionFactor);
+            Vector3 hoverContribution = ComputeLinearHover(pTimestep);
 
-                VDetailLog("{0},MoveLinear,nonZero,origlmDir={1},origlvVel={2},vehVel={3},add={4},decay={5},frict={6},lmDir={7},lvVec={8},newVel={9}",
-                                Prim.LocalID, origDir, origVel, vehicleVelocity, addAmount, decayFactor, frictionFactor, 
-                                m_linearMotorDirection, m_lastLinearVelocityVector, m_newVelocity);
-            }
-            else
-            {
-                // if what remains of direction is very small, zero it.
-                m_linearMotorDirection = Vector3.Zero;
-                m_lastLinearVelocityVector = Vector3.Zero;
-                m_newVelocity = Vector3.Zero;
+            ComputeLinearBlockingEndPoint(pTimestep);
+
+            Vector3 limitMotorUpContribution = ComputeLinearMotorUp(pTimestep);
+
+            // ==================================================================
+            Vector3 newVelocity = linearMotorContribution
+                            + terrainHeightContribution
+                            + hoverContribution
+                            + limitMotorUpContribution;
 
-                VDetailLog("{0},MoveLinear,zeroed", Prim.LocalID);
+            Vector3 newForce = buoyancyContribution;
+
+            // If not changing some axis, reduce out velocity
+            if ((m_flags & (VehicleFlag.NO_X)) != 0)
+                newVelocity.X = 0;
+            if ((m_flags & (VehicleFlag.NO_Y)) != 0)
+                newVelocity.Y = 0;
+            if ((m_flags & (VehicleFlag.NO_Z)) != 0)
+                newVelocity.Z = 0;
+
+            // ==================================================================
+            // Clamp high or low velocities
+            float newVelocityLengthSq = newVelocity.LengthSquared();
+            if (newVelocityLengthSq > 1000f)
+            {
+                newVelocity /= newVelocity.Length();
+                newVelocity *= 1000f;
             }
+            else if (newVelocityLengthSq < 0.001f)
+                newVelocity = Vector3.Zero;
 
-            // m_newVelocity is velocity computed from linear motor in world coordinates
+            // ==================================================================
+            // Stuff new linear velocity into the vehicle.
+            // Since the velocity is just being set, it is not scaled by pTimeStep. Bullet will do that for us.
+            VehicleVelocity = newVelocity;
 
-            // Gravity and Buoyancy
-            // There is some gravity, make a gravity force vector that is applied after object velocity.
-            // m_VehicleBuoyancy: -1=2g; 0=1g; 1=0g;
-            Vector3 grav = Prim.PhysicsScene.DefaultGravity * (1f - m_VehicleBuoyancy);
+            // Other linear forces are applied as forces.
+            Vector3 totalDownForce = newForce * m_vehicleMass;
+            if (!totalDownForce.ApproxEquals(Vector3.Zero, 0.01f))
+            {
+                VehicleAddForce(totalDownForce);
+            }
 
-            /*
-             * RA: Not sure why one would do this unless we are hoping external forces are doing gravity, ...
-            // Preserve the current Z velocity
-            Vector3 vel_now = m_prim.Velocity;
-            m_dir.Z = vel_now.Z;        // Preserve the accumulated falling velocity
-             */
+            VDetailLog("{0},  MoveLinear,done,newVel={1},totDown={2},IsColliding={3}",
+                                Prim.LocalID, newVelocity, totalDownForce, Prim.IsColliding);
+            VDetailLog("{0},  MoveLinear,done,linContrib={1},terrContrib={2},hoverContrib={3},limitContrib={4},buoyContrib={5}",
+                                Prim.LocalID,
+                                linearMotorContribution, terrainHeightContribution, hoverContribution, 
+                                limitMotorUpContribution, buoyancyContribution
+            );
 
-            Vector3 pos = Prim.ForcePosition;
-//            Vector3 accel = new Vector3(-(m_dir.X - m_lastLinearVelocityVector.X / 0.1f), -(m_dir.Y - m_lastLinearVelocityVector.Y / 0.1f), m_dir.Z - m_lastLinearVelocityVector.Z / 0.1f);
+        } // end MoveLinear()
 
+        public Vector3 ComputeLinearTerrainHeightCorrection(float pTimestep)
+        {
+            Vector3 ret = Vector3.Zero;
             // If below the terrain, move us above the ground a little.
-            float terrainHeight = Prim.PhysicsScene.TerrainManager.GetTerrainHeightAtXYZ(pos);
-            // Taking the rotated size doesn't work here because m_prim.Size is the size of the root prim and not the linkset.
-            //     TODO: Add a m_prim.LinkSet.Size similar to m_prim.LinkSet.Mass.
-            // Vector3 rotatedSize = m_prim.Size * m_prim.ForceOrientation;
-            // if (rotatedSize.Z < terrainHeight)
-            if (pos.Z < terrainHeight)
+            // TODO: Consider taking the rotated size of the object or possibly casting a ray.
+            if (VehiclePosition.Z < GetTerrainHeight(VehiclePosition))
             {
-                pos.Z = terrainHeight + 2;
-                Prim.ForcePosition = pos;
-                VDetailLog("{0},MoveLinear,terrainHeight,terrainHeight={1},pos={2}", Prim.LocalID, terrainHeight, pos);
+                // Force position because applying force won't get the vehicle through the terrain
+                Vector3 newPosition = VehiclePosition;
+                newPosition.Z = GetTerrainHeight(VehiclePosition) + 1f;
+                VehiclePosition = newPosition;
+                VDetailLog("{0},  MoveLinear,terrainHeight,terrainHeight={1},pos={2}",
+                        Prim.LocalID, GetTerrainHeight(VehiclePosition), VehiclePosition);
             }
+            return ret;
+        }
+
+        public Vector3 ComputeLinearHover(float pTimestep)
+        {
+            Vector3 ret = Vector3.Zero;
 
-            // Check if hovering
             // m_VhoverEfficiency: 0=bouncy, 1=totally damped
             // m_VhoverTimescale: time to achieve height
             if ((m_flags & (VehicleFlag.HOVER_WATER_ONLY | VehicleFlag.HOVER_TERRAIN_ONLY | VehicleFlag.HOVER_GLOBAL_HEIGHT)) != 0)
@@ -663,11 +949,11 @@ namespace OpenSim.Region.Physics.BulletSPlugin
                 // We should hover, get the target height
                 if ((m_flags & VehicleFlag.HOVER_WATER_ONLY) != 0)
                 {
-                    m_VhoverTargetHeight = Prim.PhysicsScene.GetWaterLevelAtXYZ(pos) + m_VhoverHeight;
+                    m_VhoverTargetHeight = GetWaterLevel(VehiclePosition) + m_VhoverHeight;
                 }
                 if ((m_flags & VehicleFlag.HOVER_TERRAIN_ONLY) != 0)
                 {
-                    m_VhoverTargetHeight = terrainHeight + m_VhoverHeight;
+                    m_VhoverTargetHeight = GetTerrainHeight(VehiclePosition) + m_VhoverHeight;
                 }
                 if ((m_flags & VehicleFlag.HOVER_GLOBAL_HEIGHT) != 0)
                 {
@@ -677,45 +963,44 @@ namespace OpenSim.Region.Physics.BulletSPlugin
                 if ((m_flags & VehicleFlag.HOVER_UP_ONLY) != 0)
                 {
                     // If body is already heigher, use its height as target height
-                    if (pos.Z > m_VhoverTargetHeight)
-                        m_VhoverTargetHeight = pos.Z;
+                    if (VehiclePosition.Z > m_VhoverTargetHeight)
+                        m_VhoverTargetHeight = VehiclePosition.Z;
                 }
+                
                 if ((m_flags & VehicleFlag.LOCK_HOVER_HEIGHT) != 0)
                 {
-                    if (Math.Abs(pos.Z - m_VhoverTargetHeight) > 0.2f)
+                    if (Math.Abs(VehiclePosition.Z - m_VhoverTargetHeight) > 0.2f)
                     {
+                        Vector3 pos = VehiclePosition;
                         pos.Z = m_VhoverTargetHeight;
-                        Prim.ForcePosition = pos;
+                        VehiclePosition = pos;
                     }
                 }
                 else
                 {
-                    float verticalError = pos.Z - m_VhoverTargetHeight;
-                    // RA: where does the 50 come from?
-                    float verticalCorrectionVelocity = pTimestep * ((verticalError * 50.0f) / m_VhoverTimescale);
-                    // Replace Vertical speed with correction figure if significant
-                    if (Math.Abs(verticalError) > 0.01f)
-                    {
-                        m_newVelocity.Z += verticalCorrectionVelocity;
-                        //KF: m_VhoverEfficiency is not yet implemented
-                    }
-                    else if (verticalError < -0.01)
-                    {
-                        m_newVelocity.Z -= verticalCorrectionVelocity;
-                    }
-                    else
-                    {
-                        m_newVelocity.Z = 0f;
-                    }
+                    // Error is positive if below the target and negative if above.
+                    float verticalError = m_VhoverTargetHeight - VehiclePosition.Z;
+                    float verticalCorrectionVelocity = verticalError / m_VhoverTimescale;
+
+                    // TODO: implement m_VhoverEfficiency correctly
+                    ret = new Vector3(0f, 0f, verticalCorrectionVelocity);
                 }
 
-                VDetailLog("{0},MoveLinear,hover,pos={1},dir={2},height={3},target={4}", Prim.LocalID, pos, m_newVelocity, m_VhoverHeight, m_VhoverTargetHeight);
+                VDetailLog("{0},  MoveLinear,hover,pos={1},eff={2},hoverTS={3},height={4},target={5},ret={6}",
+                                Prim.LocalID, VehiclePosition, m_VhoverEfficiency, m_VhoverTimescale, m_VhoverHeight, m_VhoverTargetHeight, ret);
             }
 
+            return ret;
+        }
+
+        public bool ComputeLinearBlockingEndPoint(float pTimestep)
+        {
+            bool changed = false;
+
+            Vector3 pos = VehiclePosition;
             Vector3 posChange = pos - m_lastPositionVector;
             if (m_BlockingEndPoint != Vector3.Zero)
             {
-                bool changed = false;
                 if (pos.X >= (m_BlockingEndPoint.X - (float)1))
                 {
                     pos.X -= posChange.X + 1;
@@ -743,233 +1028,113 @@ namespace OpenSim.Region.Physics.BulletSPlugin
                 }
                 if (changed)
                 {
-                    Prim.ForcePosition = pos;
-                    VDetailLog("{0},MoveLinear,blockingEndPoint,block={1},origPos={2},pos={3}",
+                    VehiclePosition = pos;
+                    VDetailLog("{0},  MoveLinear,blockingEndPoint,block={1},origPos={2},pos={3}",
                                 Prim.LocalID, m_BlockingEndPoint, posChange, pos);
                 }
             }
+            return changed;
+        }
 
-            #region downForce
-            Vector3 downForce = Vector3.Zero;
+        // From http://wiki.secondlife.com/wiki/LlSetVehicleFlags :
+        //    Prevent ground vehicles from motoring into the sky. This flag has a subtle effect when
+        //    used with conjunction with banking: the strength of the banking will decay when the
+        //    vehicle no longer experiences collisions. The decay timescale is the same as
+        //    VEHICLE_BANKING_TIMESCALE. This is to help prevent ground vehicles from steering
+        //    when they are in mid jump. 
+        // TODO: this code is wrong. Also, what should it do for boats (height from water)?
+        //    This is just using the ground and a general collision check. Should really be using
+        //    a downward raycast to find what is below.
+        public Vector3 ComputeLinearMotorUp(float pTimestep)
+        {
+            Vector3 ret = Vector3.Zero;
+            float distanceAboveGround = 0f;
 
             if ((m_flags & (VehicleFlag.LIMIT_MOTOR_UP)) != 0)
             {
-                // If the vehicle is motoring into the sky, get it going back down.
-                // Is this an angular force or both linear and angular??
-                float distanceAboveGround = pos.Z - terrainHeight;
-                if (distanceAboveGround > 2f)
+                float targetHeight = Type == Vehicle.TYPE_BOAT ? GetWaterLevel(VehiclePosition) : GetTerrainHeight(VehiclePosition);
+                distanceAboveGround = VehiclePosition.Z - targetHeight;
+                // Not colliding if the vehicle is off the ground
+                if (!Prim.IsColliding)
                 {
-                    // downForce = new Vector3(0, 0, (-distanceAboveGround / m_bankingTimescale) * pTimestep);
                     // downForce = new Vector3(0, 0, -distanceAboveGround / m_bankingTimescale);
-                    downForce = new Vector3(0, 0, -distanceAboveGround);
+                    ret = new Vector3(0, 0, -distanceAboveGround);
                 }
-                // TODO: this calculation is all wrong. From the description at
+                // TODO: this calculation is wrong. From the description at
                 //     (http://wiki.secondlife.com/wiki/Category:LSL_Vehicle), the downForce
                 //     has a decay factor. This says this force should
                 //     be computed with a motor.
-                VDetailLog("{0},MoveLinear,limitMotorUp,distAbove={1},downForce={2}", 
-                                    Prim.LocalID, distanceAboveGround, downForce);
+                // TODO: add interaction with banking.
             }
-            #endregion // downForce
-
-            // If not changing some axis, reduce out velocity
-            if ((m_flags & (VehicleFlag.NO_X)) != 0)
-                m_newVelocity.X = 0;
-            if ((m_flags & (VehicleFlag.NO_Y)) != 0)
-                m_newVelocity.Y = 0;
-            if ((m_flags & (VehicleFlag.NO_Z)) != 0)
-                m_newVelocity.Z = 0;
-
-            // Clamp REALLY high or low velocities
-            if (m_newVelocity.LengthSquared() > 1e6f)
-            {
-                m_newVelocity /= m_newVelocity.Length();
-                m_newVelocity *= 1000f;
-            }
-            else if (m_newVelocity.LengthSquared() < 1e-6f)
-                m_newVelocity = Vector3.Zero;
-
-            // Stuff new linear velocity into the vehicle
-            Prim.ForceVelocity = m_newVelocity;
-            // Prim.ApplyForceImpulse((m_newVelocity - Prim.Velocity) * m_vehicleMass, false);    // DEBUG DEBUG
-
-            Vector3 totalDownForce = downForce + grav;
-            if (totalDownForce != Vector3.Zero)
-            {
-                Prim.AddForce(totalDownForce * m_vehicleMass, false);
-                // Prim.ApplyForceImpulse(totalDownForce * m_vehicleMass, false);
-            }
-
-            VDetailLog("{0},MoveLinear,done,lmDir={1},lmVel={2},newVel={3},primVel={4},totalDown={5}",
-                    Prim.LocalID, m_linearMotorDirection, m_lastLinearVelocityVector, m_newVelocity, Prim.Velocity, totalDownForce);
-
-        } // end MoveLinear()
+            VDetailLog("{0},  MoveLinear,limitMotorUp,distAbove={1},colliding={2},ret={3}",
+                                Prim.LocalID, distanceAboveGround, Prim.IsColliding, ret);
+            return ret;
+        }
 
         // =======================================================================
+        // =======================================================================
         // Apply the effect of the angular motor.
+        // The 'contribution' is how much angular correction velocity each function wants.
+        //     All the contributions are added together and the resulting velocity is
+        //     set directly on the vehicle.
         private void MoveAngular(float pTimestep)
         {
-            // m_angularMotorDirection         // angular velocity requested by LSL motor
-            // m_angularMotorApply             // application frame counter
-            // m_angularMotorVelocity          // current angular motor velocity (ramps up and down)
-            // m_angularMotorTimescale         // motor angular velocity ramp up rate
-            // m_angularMotorDecayTimescale    // motor angular velocity decay rate
-            // m_angularFrictionTimescale      // body angular velocity  decay rate
-            // m_lastAngularVelocity           // what was last applied to body
-
-            if (m_angularMotorDirection.LengthSquared() > 0.0001)
-            {
-                Vector3 origVel = m_angularMotorVelocity;
-                Vector3 origDir = m_angularMotorDirection;
-
-                //       new velocity    +=                      error                       /  (  time to get there   / step interval)
-                //                           requested direction   - current vehicle direction
-                m_angularMotorVelocity += (m_angularMotorDirection - m_angularMotorVelocity) /  (m_angularMotorTimescale / pTimestep);
-                // decay requested direction
-                m_angularMotorDirection *= (1.0f - (pTimestep * 1.0f/m_angularMotorDecayTimescale));
-
-                VDetailLog("{0},MoveAngular,angularMotorApply,angTScale={1},timeStep={2},origvel={3},origDir={4},vel={5}",
-                        Prim.LocalID, m_angularMotorTimescale, pTimestep, origVel, origDir, m_angularMotorVelocity);
-            }
-            else
+            // The user wants this many radians per second angular change?
+            Vector3 angularMotorContribution = m_angularMotor.Step(pTimestep);
+
+            // ==================================================================
+            // From http://wiki.secondlife.com/wiki/LlSetVehicleFlags :
+            //    This flag prevents linear deflection parallel to world z-axis. This is useful
+            //    for preventing ground vehicles with large linear deflection, like bumper cars,
+            //    from climbing their linear deflection into the sky. 
+            // That is, NO_DEFLECTION_UP says angular motion should not add any pitch or roll movement
+            if ((m_flags & (VehicleFlag.NO_DEFLECTION_UP)) != 0)
             {
-                m_angularMotorVelocity = Vector3.Zero;
+                angularMotorContribution.X = 0f;
+                angularMotorContribution.Y = 0f;
+                VDetailLog("{0},  MoveAngular,noDeflectionUp,angularMotorContrib={1}", Prim.LocalID, angularMotorContribution);
             }
 
-            #region Vertical attactor
-
-            Vector3 vertattr = Vector3.Zero;
-            Vector3 deflection = Vector3.Zero;
-            Vector3 banking = Vector3.Zero;
-
-            // If vertical attaction timescale is reasonable and we applied an angular force last time...
-            if (m_verticalAttractionTimescale < 300 && m_lastAngularVelocity != Vector3.Zero)
-            {
-                float VAservo = pTimestep * 0.2f / m_verticalAttractionTimescale;
-                if (Prim.IsColliding)
-                    VAservo = pTimestep * 0.05f / (m_verticalAttractionTimescale);
-
-                VAservo *= (m_verticalAttractionEfficiency * m_verticalAttractionEfficiency);
-
-                // Create a vector of the vehicle "up" in world coordinates
-                Vector3 verticalError = Vector3.UnitZ * Prim.ForceOrientation;
-                // verticalError.X and .Y are the World error amounts. They are 0 when there is no
-                //      error (Vehicle Body is 'vertical'), and .Z will be 1. As the body leans to its
-                //      side |.X| will increase to 1 and .Z fall to 0. As body inverts |.X| will fall
-                //      and .Z will go // negative. Similar for tilt and |.Y|. .X and .Y must be
-                //      modulated to prevent a stable inverted body.
-
-                // Error is 0 (no error) to +/- 2 (max error)
-                if (verticalError.Z < 0.0f)
-                {
-                    verticalError.X = 2.0f - verticalError.X;
-                    verticalError.Y = 2.0f - verticalError.Y;
-                }
-                // scale it by VAservo (timestep and timescale)
-                verticalError = verticalError * VAservo;
+            Vector3 verticalAttractionContribution = ComputeAngularVerticalAttraction();
 
-                // As the body rotates around the X axis, then verticalError.Y increases; Rotated around Y
-                //     then .X increases, so change  Body angular velocity  X based on Y, and Y based on X.
-                //     Z is not changed.
-                vertattr.X =    verticalError.Y;
-                vertattr.Y =  - verticalError.X;
-                vertattr.Z = 0f;
+            Vector3 deflectionContribution = ComputeAngularDeflection();
 
-                // scaling appears better usingsquare-law
-                Vector3 angularVelocity = Prim.ForceRotationalVelocity;
-                float bounce = 1.0f - (m_verticalAttractionEfficiency * m_verticalAttractionEfficiency);
-                vertattr.X += bounce * angularVelocity.X;
-                vertattr.Y += bounce * angularVelocity.Y;
+            Vector3 bankingContribution = ComputeAngularBanking();
 
-                VDetailLog("{0},MoveAngular,verticalAttraction,VAservo={1},effic={2},verticalError={3},bounce={4},vertattr={5}",
-                            Prim.LocalID, VAservo, m_verticalAttractionEfficiency, verticalError, bounce, vertattr);
+            // ==================================================================
+            m_lastVertAttractor = verticalAttractionContribution;
 
-            }
-            #endregion // Vertical attactor
+            m_lastAngularVelocity = angularMotorContribution
+                                    + verticalAttractionContribution
+                                    + deflectionContribution
+                                    + bankingContribution;
 
-            #region Deflection
+            // Add of the above computation are made relative to vehicle coordinates.
+            // Convert to world coordinates.
+            m_lastAngularVelocity *= VehicleOrientation;
 
-            if (m_angularDeflectionEfficiency != 0)
+            // ==================================================================
+            // Apply the correction velocity.
+            // TODO: Should this be applied as an angular force (torque)?
+            if (!m_lastAngularVelocity.ApproxEquals(Vector3.Zero, 0.01f))
             {
-                // Compute a scaled vector that points in the preferred axis (X direction)
-                Vector3 scaledDefaultDirection =
-                    new Vector3((pTimestep * 10 * (m_angularDeflectionEfficiency / m_angularDeflectionTimescale)), 0, 0);
-                // Adding the current vehicle orientation and reference frame displaces the orientation to the frame.
-                // Rotate the scaled default axix relative to the actual vehicle direction giving where it should point.
-                Vector3 preferredAxisOfMotion = scaledDefaultDirection * Quaternion.Add(Prim.ForceOrientation, m_referenceFrame);
-
-                // Scale by efficiency and timescale
-                deflection = (preferredAxisOfMotion * (m_angularDeflectionEfficiency) / m_angularDeflectionTimescale) * pTimestep;
-
-                VDetailLog("{0},MoveAngular,Deflection,perfAxis={1},deflection={2}", 
-                                        Prim.LocalID, preferredAxisOfMotion, deflection);
-                // This deflection computation is not correct.
-                deflection = Vector3.Zero;
-            }
+                VehicleRotationalVelocity = m_lastAngularVelocity;
 
-            #endregion
-
-            #region Banking
-
-            if (m_bankingEfficiency != 0)
+                VDetailLog("{0},  MoveAngular,done,nonZero,angMotorContrib={1},vertAttrContrib={2},bankContrib={3},deflectContrib={4},totalContrib={5}",
+                                    Prim.LocalID,
+                                    angularMotorContribution, verticalAttractionContribution,
+                                    bankingContribution, deflectionContribution,
+                                    m_lastAngularVelocity
+                                    );
+            }
+            else
             {
-                Vector3 dir = Vector3.One * Prim.ForceOrientation;
-                float mult = (m_bankingMix*m_bankingMix)*-1*(m_bankingMix < 0 ? -1 : 1);
-                    //Changes which way it banks in and out of turns
-
-                //Use the square of the efficiency, as it looks much more how SL banking works
-                float effSquared = (m_bankingEfficiency*m_bankingEfficiency);
-                if (m_bankingEfficiency < 0)
-                    effSquared *= -1; //Keep the negative!
-
-                float mix = Math.Abs(m_bankingMix);
-                if (m_angularMotorVelocity.X == 0)
-                {
-                    /*if (!parent.Orientation.ApproxEquals(this.m_referenceFrame, 0.25f))
-                    {
-                        Vector3 axisAngle;
-                        float angle;
-                        parent.Orientation.GetAxisAngle(out axisAngle, out angle);
-                        Vector3 rotatedVel = parent.Velocity * parent.Orientation;
-                        if ((rotatedVel.X < 0 && axisAngle.Y > 0) || (rotatedVel.X > 0 && axisAngle.Y < 0))
-                            m_angularMotorVelocity.X += (effSquared * (mult * mix)) * (1f) * 10;
-                        else
-                            m_angularMotorVelocity.X += (effSquared * (mult * mix)) * (-1f) * 10;
-                    }*/
-                }
-                else
-                    banking.Z += (effSquared*(mult*mix))*(m_angularMotorVelocity.X) * 4;
-                if (!Prim.IsColliding && Math.Abs(m_angularMotorVelocity.X) > mix)
-                    //If they are colliding, we probably shouldn't shove the prim around... probably
-                {
-                    float angVelZ = m_angularMotorVelocity.X*-1;
-                    /*if(angVelZ > mix)
-                        angVelZ = mix;
-                    else if(angVelZ < -mix)
-                        angVelZ = -mix;*/
-                    //This controls how fast and how far the banking occurs
-                    Vector3 bankingRot = new Vector3(angVelZ*(effSquared*mult), 0, 0);
-                    if (bankingRot.X > 3)
-                        bankingRot.X = 3;
-                    else if (bankingRot.X < -3)
-                        bankingRot.X = -3;
-                    bankingRot *= Prim.ForceOrientation;
-                    banking += bankingRot;
-                }
-                m_angularMotorVelocity.X *= m_bankingEfficiency == 1 ? 0.0f : 1 - m_bankingEfficiency;
-                VDetailLog("{0},MoveAngular,Banking,bEff={1},angMotVel={2},banking={3}", 
-                                Prim.LocalID, m_bankingEfficiency, m_angularMotorVelocity, banking);
+                // The vehicle is not adding anything angular wise.
+                VehicleRotationalVelocity = Vector3.Zero;
+                VDetailLog("{0},  MoveAngular,done,zero", Prim.LocalID);
             }
 
-            #endregion
-
-            m_lastVertAttractor = vertattr;
-
-            // Sum velocities
-            m_lastAngularVelocity = m_angularMotorVelocity + vertattr + banking + deflection;
-
-            #region Linear Motor Offset
-
+            // ==================================================================
             //Offset section
             if (m_linearMotorOffset != Vector3.Zero)
             {
@@ -985,8 +1150,8 @@ namespace OpenSim.Region.Physics.BulletSPlugin
                 //
                 // The torque created is the linear velocity crossed with the offset
 
-                // NOTE: this computation does should be in the linear section
-                //    because there we know the impulse being applied.
+                // TODO: this computation should be in the linear section
+                //    because that is where we know the impulse being applied.
                 Vector3 torqueFromOffset = Vector3.Zero;
                 // torqueFromOffset = Vector3.Cross(m_linearMotorOffset, appliedImpulse);
                 if (float.IsNaN(torqueFromOffset.X))
@@ -995,47 +1160,185 @@ namespace OpenSim.Region.Physics.BulletSPlugin
                     torqueFromOffset.Y = 0;
                 if (float.IsNaN(torqueFromOffset.Z))
                     torqueFromOffset.Z = 0;
-                torqueFromOffset *= m_vehicleMass;
-                Prim.ApplyTorqueImpulse(torqueFromOffset, true);
-                VDetailLog("{0},BSDynamic.MoveAngular,motorOffset,applyTorqueImpulse={1}", Prim.LocalID, torqueFromOffset);
+
+                VehicleAddAngularForce(torqueFromOffset * m_vehicleMass);
+                VDetailLog("{0},  BSDynamic.MoveAngular,motorOffset,applyTorqueImpulse={1}", Prim.LocalID, torqueFromOffset);
             }
 
-            #endregion
+        }
+        // From http://wiki.secondlife.com/wiki/Linden_Vehicle_Tutorial:
+        //      Some vehicles, like boats, should always keep their up-side up. This can be done by
+        //      enabling the "vertical attractor" behavior that springs the vehicle's local z-axis to
+        //      the world z-axis (a.k.a. "up"). To take advantage of this feature you would set the
+        //      VEHICLE_VERTICAL_ATTRACTION_TIMESCALE to control the period of the spring frequency,
+        //      and then set the VEHICLE_VERTICAL_ATTRACTION_EFFICIENCY to control the damping. An
+        //      efficiency of 0.0 will cause the spring to wobble around its equilibrium, while an
+        //      efficiency of 1.0 will cause the spring to reach its equilibrium with exponential decay.
+        public Vector3 ComputeAngularVerticalAttraction()
+        {
+            Vector3 ret = Vector3.Zero;
 
-            if ((m_flags & (VehicleFlag.NO_DEFLECTION_UP)) != 0)
+            // If vertical attaction timescale is reasonable
+            if (m_verticalAttractionTimescale < m_verticalAttractionCutoff)
             {
-                m_lastAngularVelocity.X = 0;
-                m_lastAngularVelocity.Y = 0;
-                VDetailLog("{0},MoveAngular,noDeflectionUp,lastAngular={1}", Prim.LocalID, m_lastAngularVelocity);
+                // Take a vector pointing up and convert it from world to vehicle relative coords.
+                Vector3 verticalError = Vector3.UnitZ * VehicleOrientation;
+
+                // If vertical attraction correction is needed, the vector that was pointing up (UnitZ)
+                //    is now:
+                //    leaning to one side: rotated around the X axis with the Y value going
+                //        from zero (nearly straight up) to one (completely to the side)) or
+                //    leaning front-to-back: rotated around the Y axis with the value of X being between
+                //         zero and one.
+                // The value of Z is how far the rotation is off with 1 meaning none and 0 being 90 degrees.
+
+                // Y error means needed rotation around X axis and visa versa.
+                // Since the error goes from zero to one, the asin is the corresponding angle.
+                ret.X = (float)Math.Asin(verticalError.Y);
+                // (Tilt forward (positive X) needs to tilt back (rotate negative) around Y axis.)
+                ret.Y = -(float)Math.Asin(verticalError.X);
+
+                // If verticalError.Z is negative, the vehicle is upside down. Add additional push.
+                if (verticalError.Z < 0f)
+                {
+                    ret.X += PIOverFour;
+                    ret.Y += PIOverFour;
+                }
+
+                // 'ret' is now the necessary velocity to correct tilt in one second.
+                //     Correction happens over a number of seconds.
+                Vector3 unscaledContrib = ret;
+                ret /= m_verticalAttractionTimescale;
+
+                VDetailLog("{0},  MoveAngular,verticalAttraction,,verticalError={1},unscaled={2},eff={3},ts={4},vertAttr={5}",
+                                Prim.LocalID, verticalError, unscaledContrib, m_verticalAttractionEfficiency, m_verticalAttractionTimescale, ret);
             }
+            return ret;
+        }
 
-            if (m_lastAngularVelocity.ApproxEquals(Vector3.Zero, 0.01f))
+        // Return the angular correction to correct the direction the vehicle is pointing to be
+        //      the direction is should want to be pointing.
+        // The vehicle is moving in some direction and correct its orientation to it is pointing
+        //     in that direction.
+        // TODO: implement reference frame.
+        public Vector3 ComputeAngularDeflection()
+        {
+            Vector3 ret = Vector3.Zero;
+
+            // Since angularMotorUp and angularDeflection are computed independently, they will calculate
+            //     approximately the same X or Y correction. When added together (when contributions are combined)
+            //     this creates an over-correction and then wabbling as the target is overshot.
+            // TODO: rethink how the different correction computations inter-relate.
+
+            if (m_angularDeflectionEfficiency != 0 && VehicleVelocity != Vector3.Zero)
             {
-                m_lastAngularVelocity = Vector3.Zero; // Reduce small value to zero.
-                Prim.ZeroAngularMotion(true);
-                VDetailLog("{0},MoveAngular,zeroAngularMotion,lastAngular={1}", Prim.LocalID, m_lastAngularVelocity);
+                // The direction the vehicle is moving
+                Vector3 movingDirection = VehicleVelocity;
+                movingDirection.Normalize();
+
+                // If the vehicle is going backward, it is still pointing forward
+                movingDirection *= Math.Sign(VehicleForwardSpeed);
+
+                // The direction the vehicle is pointing
+                Vector3 pointingDirection = Vector3.UnitX * VehicleOrientation;
+                pointingDirection.Normalize();
+
+                // The difference between what is and what should be.
+                Vector3 deflectionError = movingDirection - pointingDirection;
+
+                // Don't try to correct very large errors (not our job)
+                // if (Math.Abs(deflectionError.X) > PIOverFour) deflectionError.X = PIOverTwo * Math.Sign(deflectionError.X);
+                // if (Math.Abs(deflectionError.Y) > PIOverFour) deflectionError.Y = PIOverTwo * Math.Sign(deflectionError.Y);
+                // if (Math.Abs(deflectionError.Z) > PIOverFour) deflectionError.Z = PIOverTwo * Math.Sign(deflectionError.Z);
+                if (Math.Abs(deflectionError.X) > PIOverFour) deflectionError.X = 0f;
+                if (Math.Abs(deflectionError.Y) > PIOverFour) deflectionError.Y = 0f;
+                if (Math.Abs(deflectionError.Z) > PIOverFour) deflectionError.Z = 0f;
+
+                // ret = m_angularDeflectionCorrectionMotor(1f, deflectionError);
+
+                // Scale the correction by recovery timescale and efficiency
+                ret = (-deflectionError) * m_angularDeflectionEfficiency;
+                ret /= m_angularDeflectionTimescale;
+
+                VDetailLog("{0},  MoveAngular,Deflection,movingDir={1},pointingDir={2},deflectError={3},ret={4}",
+                    Prim.LocalID, movingDirection, pointingDirection, deflectionError, ret);
+                VDetailLog("{0},  MoveAngular,Deflection,fwdSpd={1},defEff={2},defTS={3}",
+                    Prim.LocalID, VehicleForwardSpeed, m_angularDeflectionEfficiency, m_angularDeflectionTimescale);
             }
-            else
+            return ret;
+        }
+
+        // Return an angular change to rotate the vehicle around the Z axis when the vehicle
+        //     is tipped around the X axis.
+        // From http://wiki.secondlife.com/wiki/Linden_Vehicle_Tutorial:
+        //      The vertical attractor feature must be enabled in order for the banking behavior to
+        //      function. The way banking works is this: a rotation around the vehicle's roll-axis will
+        //      produce a angular velocity around the yaw-axis, causing the vehicle to turn. The magnitude
+        //      of the yaw effect will be proportional to the
+        //          VEHICLE_BANKING_EFFICIENCY, the angle of the roll rotation, and sometimes the vehicle's
+        //                 velocity along its preferred axis of motion. 
+        //          The VEHICLE_BANKING_EFFICIENCY can vary between -1 and +1. When it is positive then any
+        //                  positive rotation (by the right-hand rule) about the roll-axis will effect a
+        //                  (negative) torque around the yaw-axis, making it turn to the right--that is the
+        //                  vehicle will lean into the turn, which is how real airplanes and motorcycle's work.
+        //                  Negating the banking coefficient will make it so that the vehicle leans to the
+        //                  outside of the turn (not very "physical" but might allow interesting vehicles so why not?). 
+        //           The VEHICLE_BANKING_MIX is a fake (i.e. non-physical) parameter that is useful for making
+        //                  banking vehicles do what you want rather than what the laws of physics allow.
+        //                  For example, consider a real motorcycle...it must be moving forward in order for
+        //                  it to turn while banking, however video-game motorcycles are often configured
+        //                  to turn in place when at a dead stop--because they are often easier to control
+        //                  that way using the limited interface of the keyboard or game controller. The
+        //                  VEHICLE_BANKING_MIX enables combinations of both realistic and non-realistic
+        //                  banking by functioning as a slider between a banking that is correspondingly
+        //                  totally static (0.0) and totally dynamic (1.0). By "static" we mean that the
+        //                  banking effect depends only on the vehicle's rotation about its roll-axis compared
+        //                  to "dynamic" where the banking is also proportional to its velocity along its
+        //                  roll-axis. Finding the best value of the "mixture" will probably require trial and error. 
+        //      The time it takes for the banking behavior to defeat a preexisting angular velocity about the
+        //      world z-axis is determined by the VEHICLE_BANKING_TIMESCALE. So if you want the vehicle to
+        //      bank quickly then give it a banking timescale of about a second or less, otherwise you can
+        //      make a sluggish vehicle by giving it a timescale of several seconds. 
+        public Vector3 ComputeAngularBanking()
+        {
+            Vector3 ret = Vector3.Zero;
+
+            if (m_bankingEfficiency != 0 && m_verticalAttractionTimescale < m_verticalAttractionCutoff)
             {
-                // Apply to the body.
-                // The above calculates the absolute angular velocity needed. Angular velocity is massless.
-                // Since we are stuffing the angular velocity directly into the object, the computed
-                //     velocity needs to be scaled by the timestep.
-                Vector3 applyAngularForce = ((m_lastAngularVelocity * pTimestep) - Prim.ForceRotationalVelocity);
-                Prim.ForceRotationalVelocity = applyAngularForce;
-
-                // Decay the angular movement for next time
-                Vector3 decayamount = (Vector3.One / m_angularFrictionTimescale) * pTimestep;
-                m_lastAngularVelocity *= Vector3.One - decayamount;
-
-                VDetailLog("{0},MoveAngular,done,newRotVel={1},decay={2},lastAngular={3}", 
-                                    Prim.LocalID, applyAngularForce, decayamount, m_lastAngularVelocity);
+                // Rotate a UnitZ vector (pointing up) to how the vehicle is oriented.
+                // As the vehicle rolls to the right or left, the Y value will increase from
+                //     zero (straight up) to 1 or -1 (full tilt right  or left)
+                Vector3 rollComponents = Vector3.UnitZ * VehicleOrientation;
+                
+                // Figure out the yaw value for this much roll.
+                // Squared because that seems to give a good value
+                float yawAngle = (float)Math.Asin(rollComponents.Y * rollComponents.Y) * m_bankingEfficiency;
+
+                //        actual error  =       static turn error            +           dynamic turn error
+                float mixedYawAngle = yawAngle * (1f - m_bankingMix) + yawAngle * m_bankingMix * VehicleForwardSpeed;
+
+                // TODO: the banking effect should not go to infinity but what to limit it to?
+                mixedYawAngle = ClampInRange(-20f, mixedYawAngle, 20f);
+
+                // Build the force vector to change rotation from what it is to what it should be
+                ret.Z = -mixedYawAngle;
+
+                // Don't do it all at once.
+                ret /= m_bankingTimescale;
+
+                VDetailLog("{0},  MoveAngular,Banking,rollComp={1},speed={2},rollComp={3},yAng={4},mYAng={5},ret={6}",
+                            Prim.LocalID, rollComponents, VehicleForwardSpeed, rollComponents, yawAngle, mixedYawAngle, ret);
             }
-        } //end MoveAngular
+            return ret;
+        }
 
+        // This is from previous instantiations of XXXDynamics.cs.
+        // Applies roll reference frame.
+        // TODO: is this the right way to separate the code to do this operation?
+        //    Should this be in MoveAngular()?
         internal void LimitRotation(float timestep)
         {
-            Quaternion rotq = Prim.ForceOrientation;
+            Quaternion rotq = VehicleOrientation;
             Quaternion m_rot = rotq;
             if (m_RollreferenceFrame != Quaternion.Identity)
             {
@@ -1063,12 +1366,18 @@ namespace OpenSim.Region.Physics.BulletSPlugin
             }
             if (rotq != m_rot)
             {
-                Prim.ForceOrientation = m_rot;
-                VDetailLog("{0},LimitRotation,done,orig={1},new={2}", Prim.LocalID, rotq, m_rot);
+                VehicleOrientation = m_rot;
+                VDetailLog("{0},  LimitRotation,done,orig={1},new={2}", Prim.LocalID, rotq, m_rot);
             }
 
         }
 
+        private float ClampInRange(float low, float val, float high)
+        {
+            return Math.Max(low, Math.Min(val, high));
+            // return Utils.Clamp(val, low, high);
+        }
+
         // Invoke the detailed logger and output something if it's enabled.
         private void VDetailLog(string msg, params Object[] args)
         {
diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSLinkset.cs b/OpenSim/Region/Physics/BulletSPlugin/BSLinkset.cs
index 0df4310..756faed 100755
--- a/OpenSim/Region/Physics/BulletSPlugin/BSLinkset.cs
+++ b/OpenSim/Region/Physics/BulletSPlugin/BSLinkset.cs
@@ -32,6 +32,15 @@ using OMV = OpenMetaverse;
 
 namespace OpenSim.Region.Physics.BulletSPlugin
 {
+
+// A BSPrim can get individual information about its linkedness attached
+//    to it through an instance of a subclass of LinksetInfo.
+// Each type of linkset will define the information needed for its type.
+public abstract class BSLinksetInfo
+{
+    public virtual void Clear() { }
+}
+
 public abstract class BSLinkset
 {
     // private static string LogHeader = "[BULLETSIM LINKSET]";
@@ -47,7 +56,7 @@ public abstract class BSLinkset
     {
         BSLinkset ret = null;
 
-        switch ((int)physScene.Params.linksetImplementation)
+        switch ((int)BSParam.LinksetImplementation)
         {
             case (int)LinksetImplementation.Constraint:
                 ret = new BSLinksetConstraints(physScene, parent);
@@ -87,22 +96,8 @@ public abstract class BSLinkset
         return BSPhysicsShapeType.SHAPE_UNKNOWN;
     }
 
-    // Linksets move around the children so the linkset might need to compute the child position
-    public virtual OMV.Vector3 Position(BSPhysObject member)
-        { return member.RawPosition; }
-    public virtual OMV.Quaternion Orientation(BSPhysObject member)
-        { return member.RawOrientation; }
-    // TODO: does this need to be done for Velocity and RotationalVelocityy?
-    
     // We keep the prim's mass in the linkset structure since it could be dependent on other prims
-    protected float m_mass;
-    public float LinksetMass
-    {
-        get
-        {
-            return m_mass;
-        }
-    }
+    public float LinksetMass { get; protected set; }
 
     public virtual bool LinksetIsColliding { get { return false; } }
 
@@ -116,7 +111,7 @@ public abstract class BSLinkset
         get { return ComputeLinksetGeometricCenter(); }
     }
 
-    protected void Initialize(BSScene scene, BSPhysObject parent)
+    protected BSLinkset(BSScene scene, BSPhysObject parent)
     {
         // A simple linkset of one (no children)
         LinksetID = m_nextLinksetID++;
@@ -126,7 +121,8 @@ public abstract class BSLinkset
         PhysicsScene = scene;
         LinksetRoot = parent;
         m_children = new HashSet<BSPhysObject>();
-        m_mass = parent.RawMass;
+        LinksetMass = parent.RawMass;
+        Rebuilding = false;
     }
 
     // Link to a linkset where the child knows the parent.
@@ -140,7 +136,7 @@ public abstract class BSLinkset
             // Don't add the root to its own linkset
             if (!IsRoot(child))
                 AddChildToLinkset(child);
-            m_mass = ComputeLinksetMass();
+            LinksetMass = ComputeLinksetMass();
         }
         return this;
     }
@@ -159,7 +155,7 @@ public abstract class BSLinkset
                 return this;
             }
             RemoveChildFromLinkset(child);
-            m_mass = ComputeLinksetMass();
+            LinksetMass = ComputeLinksetMass();
         }
 
         // The child is down to a linkset of just itself
@@ -219,7 +215,7 @@ public abstract class BSLinkset
     // I am the root of a linkset and a new child is being added
     // Called while LinkActivity is locked.
     protected abstract void AddChildToLinkset(BSPhysObject child);
-
+    
     // I am the root of a linkset and one of my children is being removed.
     // Safe to call even if the child is not really in my linkset.
     protected abstract void RemoveChildFromLinkset(BSPhysObject child);
@@ -227,7 +223,14 @@ public abstract class BSLinkset
     // When physical properties are changed the linkset needs to recalculate
     //   its internal properties.
     // May be called at runtime or taint-time.
-    public abstract void Refresh(BSPhysObject requestor);
+    public virtual void Refresh(BSPhysObject requestor)
+    {
+        LinksetMass = ComputeLinksetMass();
+    }
+
+    // Flag denoting the linkset is in the process of being rebuilt.
+    // Used to know not the schedule a rebuild in the middle of a rebuild.
+    protected bool Rebuilding { get; set; }
 
     // The object is going dynamic (physical). Do any setup necessary
     //     for a dynamic linkset.
@@ -245,8 +248,9 @@ public abstract class BSLinkset
 
     // Called when a parameter update comes from the physics engine for any object
     //      of the linkset is received.
+    // Passed flag is update came from physics engine (true) or the user (false).
     // Called at taint-time!!
-    public abstract void UpdateProperties(BSPhysObject physObject);
+    public abstract void UpdateProperties(BSPhysObject physObject, bool physicalUpdate);
 
     // Routine used when rebuilding the body of the root of the linkset
     // Destroy all the constraints have have been made to root.
diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSLinksetCompound.cs b/OpenSim/Region/Physics/BulletSPlugin/BSLinksetCompound.cs
index b9c2cf9..bd03d31 100755
--- a/OpenSim/Region/Physics/BulletSPlugin/BSLinksetCompound.cs
+++ b/OpenSim/Region/Physics/BulletSPlugin/BSLinksetCompound.cs
@@ -28,22 +28,54 @@ using System;
 using System.Collections.Generic;
 using System.Text;
 
+using OpenSim.Framework;
+
 using OMV = OpenMetaverse;
 
 namespace OpenSim.Region.Physics.BulletSPlugin
 {
+
+// When a child is linked, the relationship position of the child to the parent
+//    is remembered so the child's world position can be recomputed when it is
+//    removed from the linkset.
+sealed class BSLinksetCompoundInfo : BSLinksetInfo
+{
+    public OMV.Vector3 OffsetPos;
+    public OMV.Quaternion OffsetRot;
+    public BSLinksetCompoundInfo(OMV.Vector3 p, OMV.Quaternion r)
+    {
+        OffsetPos = p;
+        OffsetRot = r;
+    }
+    public override void Clear()
+    {
+        OffsetPos = OMV.Vector3.Zero;
+        OffsetRot = OMV.Quaternion.Identity;
+    }
+    public override string ToString()
+    {
+        StringBuilder buff = new StringBuilder();
+        buff.Append("<p=");
+        buff.Append(OffsetPos.ToString());
+        buff.Append(",r=");
+        buff.Append(OffsetRot.ToString());
+        buff.Append(">");
+        return buff.ToString();
+    }
+};
+
 public sealed class BSLinksetCompound : BSLinkset
 {
     private static string LogHeader = "[BULLETSIM LINKSET COMPOUND]";
 
-    public BSLinksetCompound(BSScene scene, BSPhysObject parent)
+    public BSLinksetCompound(BSScene scene, BSPhysObject parent) : base(scene, parent)
     {
-        base.Initialize(scene, parent);
     }
 
     // For compound implimented linksets, if there are children, use compound shape for the root.
     public override BSPhysicsShapeType PreferredPhysicalShape(BSPhysObject requestor)
     { 
+        // Returning 'unknown' means we don't have a preference.
         BSPhysicsShapeType ret = BSPhysicsShapeType.SHAPE_UNKNOWN;
         if (IsRoot(requestor) && HasAnyChildren)
         {
@@ -55,27 +87,33 @@ public sealed class BSLinksetCompound : BSLinkset
 
     // When physical properties are changed the linkset needs to recalculate
     //   its internal properties.
-    // This is queued in the 'post taint' queue so the
-    //   refresh will happen once after all the other taints are applied.
     public override void Refresh(BSPhysObject requestor)
     {
-        // External request for Refresh (from BSPrim) is not necessary
-        // InternalRefresh(requestor);
+        base.Refresh(requestor);
+
+        // Something changed so do the rebuilding thing
+        // ScheduleRebuild();
     }
 
-    private void InternalRefresh(BSPhysObject requestor)
+    // Schedule a refresh to happen after all the other taint processing.
+    private void ScheduleRebuild(BSPhysObject requestor)
     {
-        DetailLog("{0},BSLinksetCompound.Refresh,schedulingRefresh,requestor={1}", LinksetRoot.LocalID, requestor.LocalID);
-        // Queue to happen after all the other taint processing
-        PhysicsScene.PostTaintObject("BSLinksetCompound.Refresh", requestor.LocalID, delegate()
+        DetailLog("{0},BSLinksetCompound.ScheduleRebuild,,rebuilding={1},hasChildren={2}", 
+                            requestor.LocalID, Rebuilding, HasAnyChildren);
+        // When rebuilding, it is possible to set properties that would normally require a rebuild.
+        //    If already rebuilding, don't request another rebuild.
+        //    If a linkset with just a root prim (simple non-linked prim) don't bother rebuilding.
+        if (!Rebuilding && HasAnyChildren)
         {
-            if (IsRoot(requestor) && HasAnyChildren)
-                RecomputeLinksetCompound();
-        });
+            PhysicsScene.PostTaintObject("BSLinksetCompound.ScheduleRebuild", LinksetRoot.LocalID, delegate()
+            {
+                if (HasAnyChildren)
+                    RecomputeLinksetCompound();
+            });
+        }
     }
 
-    // The object is going dynamic (physical). Do any setup necessary
-    //     for a dynamic linkset.
+    // The object is going dynamic (physical). Do any setup necessary for a dynamic linkset.
     // Only the state of the passed object can be modified. The rest of the linkset
     //     has not yet been fully constructed.
     // Return 'true' if any properties updated on the passed object.
@@ -84,12 +122,22 @@ public sealed class BSLinksetCompound : BSLinkset
     {
         bool ret = false;
         DetailLog("{0},BSLinksetCompound.MakeDynamic,call,IsRoot={1}", child.LocalID, IsRoot(child));
-        if (!IsRoot(child))
+        if (IsRoot(child))
+        {
+            // The root is going dynamic. Rebuild the linkset so parts and mass get computed properly.
+            ScheduleRebuild(LinksetRoot);
+        }
+        else
         {
-            // Physical children are removed from the world as the shape ofthe root compound
+            // The origional prims are removed from the world as the shape of the root compound
             //     shape takes over.
-            BulletSimAPI.AddToCollisionFlags2(child.PhysBody.ptr, CollisionFlags.CF_NO_CONTACT_RESPONSE);
-            BulletSimAPI.ForceActivationState2(child.PhysBody.ptr, ActivationState.DISABLE_SIMULATION);
+            PhysicsScene.PE.AddToCollisionFlags(child.PhysBody, CollisionFlags.CF_NO_CONTACT_RESPONSE);
+            PhysicsScene.PE.ForceActivationState(child.PhysBody, ActivationState.DISABLE_SIMULATION);
+            // We don't want collisions from the old linkset children.
+            PhysicsScene.PE.RemoveFromCollisionFlags(child.PhysBody, CollisionFlags.BS_SUBSCRIBE_COLLISION_EVENTS);
+
+            child.PhysBody.collisionType = CollisionType.LinksetChild;
+
             ret = true;
         }
         return ret;
@@ -104,33 +152,39 @@ public sealed class BSLinksetCompound : BSLinkset
     {
         bool ret = false;
         DetailLog("{0},BSLinksetCompound.MakeStatic,call,IsRoot={1}", child.LocalID, IsRoot(child));
-        if (!IsRoot(child))
+        if (IsRoot(child))
+        {
+            ScheduleRebuild(LinksetRoot);
+        }
+        else
         {
             // The non-physical children can come back to life.
-            BulletSimAPI.RemoveFromCollisionFlags2(child.PhysBody.ptr, CollisionFlags.CF_NO_CONTACT_RESPONSE);
-            // Don't force activation so setting of DISABLE_SIMULATION can stay.
-            BulletSimAPI.Activate2(child.PhysBody.ptr, false);
+            PhysicsScene.PE.RemoveFromCollisionFlags(child.PhysBody, CollisionFlags.CF_NO_CONTACT_RESPONSE);
+
+            child.PhysBody.collisionType = CollisionType.LinksetChild;
+
+            // Don't force activation so setting of DISABLE_SIMULATION can stay if used.
+            PhysicsScene.PE.Activate(child.PhysBody, false);
             ret = true;
         }
         return ret;
     }
 
-    // Called at taint-time!!
-    public override void UpdateProperties(BSPhysObject updated)
-    {
-        // Nothing to do for constraints on property updates
-    }
-
-    // The children move around in relationship to the root.
-    // Just grab the current values of wherever it is right now.
-    public override OMV.Vector3 Position(BSPhysObject member)
-    {
-        return BulletSimAPI.GetPosition2(member.PhysBody.ptr);
-    }
-
-    public override OMV.Quaternion Orientation(BSPhysObject member)
+    public override void UpdateProperties(BSPhysObject updated, bool physicalUpdate)
     {
-        return BulletSimAPI.GetOrientation2(member.PhysBody.ptr);
+        // The user moving a child around requires the rebuilding of the linkset compound shape
+        // One problem is this happens when a border is crossed -- the simulator implementation
+        //    is to store the position into the group which causes the move of the object
+        //    but it also means all the child positions get updated.
+        //    What would cause an unnecessary rebuild so we make sure the linkset is in a
+        //    region before bothering to do a rebuild.
+        if (!IsRoot(updated) 
+                && !physicalUpdate 
+                && PhysicsScene.TerrainManager.IsWithinKnownTerrain(LinksetRoot.RawPosition))
+        {
+            updated.LinksetInfo = null;
+            ScheduleRebuild(updated);
+        }
     }
 
     // Routine called when rebuilding the body of some member of the linkset.
@@ -142,24 +196,62 @@ public sealed class BSLinksetCompound : BSLinkset
         bool ret = false;
 
         DetailLog("{0},BSLinksetCompound.RemoveBodyDependencies,refreshIfChild,rID={1},rBody={2},isRoot={3}",
-                        child.LocalID, LinksetRoot.LocalID, LinksetRoot.PhysBody.ptr.ToString("X"), IsRoot(child));
+                        child.LocalID, LinksetRoot.LocalID, LinksetRoot.PhysBody.AddrString, IsRoot(child));
 
         if (!IsRoot(child))
         {
-            // Cause the current shape to be freed and the new one to be built.
-            InternalRefresh(LinksetRoot);
-            ret = true;
+            // Because it is a convenient time, recompute child world position and rotation based on
+            //    its position in the linkset.
+            RecomputeChildWorldPosition(child, true);
         }
 
+        // Cannot schedule a refresh/rebuild here because this routine is called when
+        //     the linkset is being rebuilt.
+        // InternalRefresh(LinksetRoot);
+
         return ret;
     }
 
     // Companion to RemoveBodyDependencies(). If RemoveBodyDependencies() returns 'true',
-    // this routine will restore the removed constraints.
+    //     this routine will restore the removed constraints.
     // Called at taint-time!!
     public override void RestoreBodyDependencies(BSPrim child)
     {
-        // The Refresh operation queued by RemoveBodyDependencies() will build any missing constraints.
+    }
+
+    // When the linkset is built, the child shape is added to the compound shape relative to the
+    //    root shape. The linkset then moves around but this does not move the actual child
+    //    prim. The child prim's location must be recomputed based on the location of the root shape.
+    private void RecomputeChildWorldPosition(BSPhysObject child, bool inTaintTime)
+    {
+        BSLinksetCompoundInfo lci = child.LinksetInfo as BSLinksetCompoundInfo;
+        if (lci != null)
+        {
+            if (inTaintTime)
+            {
+                OMV.Vector3 oldPos = child.RawPosition;
+                child.ForcePosition = LinksetRoot.RawPosition + lci.OffsetPos;
+                child.ForceOrientation = LinksetRoot.RawOrientation * lci.OffsetRot;
+                DetailLog("{0},BSLinksetCompound.RecomputeChildWorldPosition,oldPos={1},lci={2},newPos={3}",
+                                            child.LocalID, oldPos, lci, child.RawPosition);
+            }
+            else
+            {
+                // TaintedObject is not used here so the raw position is set now and not at taint-time.
+                child.Position = LinksetRoot.RawPosition + lci.OffsetPos;
+                child.Orientation = LinksetRoot.RawOrientation * lci.OffsetRot;
+            }
+        }
+        else
+        {
+            // This happens when children have been added to the linkset but the linkset
+            //     has not been constructed yet. So like, at taint time, adding children to a linkset
+            //     and then changing properties of the children (makePhysical, for instance)
+            //     but the post-print action of actually rebuilding the linkset has not yet happened.
+            // PhysicsScene.Logger.WarnFormat("{0} Restoring linkset child position failed because of no relative position computed. ID={1}",
+            //                                 LogHeader, child.LocalID);
+            DetailLog("{0},BSLinksetCompound.recomputeChildWorldPosition,noRelativePositonInfo", child.LocalID);
+        }
     }
 
     // ================================================================
@@ -174,24 +266,25 @@ public sealed class BSLinksetCompound : BSLinkset
 
             DetailLog("{0},BSLinksetCompound.AddChildToLinkset,call,child={1}", LinksetRoot.LocalID, child.LocalID);
 
-            // Cause constraints and assorted properties to be recomputed before the next simulation step.
-            InternalRefresh(LinksetRoot);
+            // Rebuild the compound shape with the new child shape included
+            ScheduleRebuild(child);
         }
         return;
     }
 
     // Remove the specified child from the linkset.
-    // Safe to call even if the child is not really in my linkset.
+    // Safe to call even if the child is not really in the linkset.
     protected override void RemoveChildFromLinkset(BSPhysObject child)
     {
         if (m_children.Remove(child))
         {
             DetailLog("{0},BSLinksetCompound.RemoveChildFromLinkset,call,rID={1},rBody={2},cID={3},cBody={4}",
                             child.LocalID,
-                            LinksetRoot.LocalID, LinksetRoot.PhysBody.ptr.ToString("X"),
-                            child.LocalID, child.PhysBody.ptr.ToString("X"));
+                            LinksetRoot.LocalID, LinksetRoot.PhysBody.AddrString,
+                            child.LocalID, child.PhysBody.AddrString);
 
             // Cause the child's body to be rebuilt and thus restored to normal operation
+            RecomputeChildWorldPosition(child, false);
             child.ForceBodyShapeRebuild(false);
 
             if (!HasAnyChildren)
@@ -201,8 +294,8 @@ public sealed class BSLinksetCompound : BSLinkset
             }
             else
             {
-                // Schedule a rebuild of the linkset  before the next simulation tick.
-                InternalRefresh(LinksetRoot);
+                // Rebuild the compound shape with the child removed
+                ScheduleRebuild(child);
             }
         }
         return;
@@ -215,61 +308,85 @@ public sealed class BSLinksetCompound : BSLinkset
     // Called at taint time!!
     private void RecomputeLinksetCompound()
     {
-        // Cause the root shape to be rebuilt as a compound object with just the root in it
-        LinksetRoot.ForceBodyShapeRebuild(true);
-
-        DetailLog("{0},BSLinksetCompound.RecomputeLinksetCompound,start,rBody={1},rShape={2},numChildren={3}",
-                        LinksetRoot.LocalID, LinksetRoot.PhysBody, LinksetRoot.PhysShape, NumberOfChildren);
-
-        // Add a shape for each of the other children in the linkset
-        ForEachMember(delegate(BSPhysObject cPrim)
+        try
         {
-            if (!IsRoot(cPrim))
-            {
-                // Each child position and rotation is given relative to the root.
-                OMV.Quaternion invRootOrientation = OMV.Quaternion.Inverse(LinksetRoot.RawOrientation);
-                OMV.Vector3 displacementPos = (cPrim.RawPosition - LinksetRoot.RawPosition) * invRootOrientation;
-                OMV.Quaternion displacementRot = cPrim.RawOrientation * invRootOrientation;
+            // Suppress rebuilding while rebuilding
+            Rebuilding = true;
 
-                DetailLog("{0},BSLinksetCompound.RecomputeLinksetCompound,addMemberToShape,mID={1},mShape={2},dispPos={3},dispRot={4}",
-                    LinksetRoot.LocalID, cPrim.LocalID, cPrim.PhysShape, displacementPos, displacementRot);
+            // Cause the root shape to be rebuilt as a compound object with just the root in it
+            LinksetRoot.ForceBodyShapeRebuild(true);
 
-                if (cPrim.PhysShape.isNativeShape)
-                {
-                    // Native shapes are not shared so we need to create a new one.
-                    // A mesh or hull is created because scale is not available on a native shape.
-                    //     (TODO: Bullet does have a btScaledCollisionShape. Can that be used?)
-                    BulletShape saveShape = cPrim.PhysShape;
-                    cPrim.PhysShape.ptr = IntPtr.Zero;  // Don't let the create free the child's shape
-                    PhysicsScene.Shapes.CreateGeomMeshOrHull(cPrim, null);
-                    BulletShape newShape = cPrim.PhysShape;
-                    cPrim.PhysShape = saveShape;
-                    BulletSimAPI.AddChildShapeToCompoundShape2(LinksetRoot.PhysShape.ptr, newShape.ptr, displacementPos, displacementRot);
-                }
-                else
+            DetailLog("{0},BSLinksetCompound.RecomputeLinksetCompound,start,rBody={1},rShape={2},numChildren={3}",
+                            LinksetRoot.LocalID, LinksetRoot.PhysBody, LinksetRoot.PhysShape, NumberOfChildren);
+
+            // Add a shape for each of the other children in the linkset
+            ForEachMember(delegate(BSPhysObject cPrim)
+            {
+                if (!IsRoot(cPrim))
                 {
-                    // For the shared shapes (meshes and hulls), just use the shape in the child.
-                    if (PhysicsScene.Shapes.ReferenceShape(cPrim.PhysShape))
+                    // Compute the displacement of the child from the root of the linkset.
+                    // This info is saved in the child prim so the relationship does not
+                    //    change over time and the new child position can be computed
+                    //    when the linkset is being disassembled (the linkset may have moved).
+                    BSLinksetCompoundInfo lci = cPrim.LinksetInfo as BSLinksetCompoundInfo;
+                    if (lci == null)
                     {
-                        PhysicsScene.Logger.ErrorFormat("{0} Rebuilt sharable shape when building linkset! Region={1}, primID={2}, shape={3}",
-                                            LogHeader, PhysicsScene.RegionName, cPrim.LocalID, cPrim.PhysShape);
+                        // Each child position and rotation is given relative to the root.
+                        OMV.Quaternion invRootOrientation = OMV.Quaternion.Inverse(LinksetRoot.RawOrientation);
+                        OMV.Vector3 displacementPos = (cPrim.RawPosition - LinksetRoot.RawPosition) * invRootOrientation;
+                        OMV.Quaternion displacementRot = cPrim.RawOrientation * invRootOrientation;
+
+                        // Save relative position for recomputing child's world position after moving linkset.
+                        lci = new BSLinksetCompoundInfo(displacementPos, displacementRot);
+                        cPrim.LinksetInfo = lci;
+                        DetailLog("{0},BSLinksetCompound.RecomputeLinksetCompound,creatingRelPos,lci={1}", cPrim.LocalID, lci);
                     }
-                    BulletSimAPI.AddChildShapeToCompoundShape2(LinksetRoot.PhysShape.ptr, cPrim.PhysShape.ptr, displacementPos, displacementRot);
-                }
-            }
-            return false;   // 'false' says to move onto the next child in the list
-        });
 
-        // With all of the linkset packed into the root prim, it has the mass of everyone.
-        float linksetMass = LinksetMass;
-        LinksetRoot.UpdatePhysicalMassProperties(linksetMass);
+                    DetailLog("{0},BSLinksetCompound.RecomputeLinksetCompound,addMemberToShape,mID={1},mShape={2},dispPos={3},dispRot={4}",
+                        LinksetRoot.LocalID, cPrim.LocalID, cPrim.PhysShape, lci.OffsetPos, lci.OffsetRot);
 
-        BulletSimAPI.RecalculateCompoundShapeLocalAabb2(LinksetRoot.PhysShape.ptr);
+                    if (cPrim.PhysShape.isNativeShape)
+                    {
+                        // A native shape is turning into a hull collision shape because native
+                        //    shapes are not shared so we have to hullify it so it will be tracked
+                        //    and freed at the correct time. This also solves the scaling problem
+                        //    (native shapes scaled but hull/meshes are assumed to not be).
+                        // TODO: decide of the native shape can just be used in the compound shape.
+                        //    Use call to CreateGeomNonSpecial().
+                        BulletShape saveShape = cPrim.PhysShape;
+                        cPrim.PhysShape.Clear();        // Don't let the create free the child's shape
+                        // PhysicsScene.Shapes.CreateGeomNonSpecial(true, cPrim, null);
+                        PhysicsScene.Shapes.CreateGeomMeshOrHull(cPrim, null);
+                        BulletShape newShape = cPrim.PhysShape;
+                        cPrim.PhysShape = saveShape;
+                        PhysicsScene.PE.AddChildShapeToCompoundShape(LinksetRoot.PhysShape, newShape, lci.OffsetPos, lci.OffsetRot);
+                    }
+                    else
+                    {
+                        // For the shared shapes (meshes and hulls), just use the shape in the child.
+                        // The reference count added here will be decremented when the compound shape
+                        //     is destroyed in BSShapeCollection (the child shapes are looped over and dereferenced).
+                        if (PhysicsScene.Shapes.ReferenceShape(cPrim.PhysShape))
+                        {
+                            PhysicsScene.Logger.ErrorFormat("{0} Rebuilt sharable shape when building linkset! Region={1}, primID={2}, shape={3}",
+                                                LogHeader, PhysicsScene.RegionName, cPrim.LocalID, cPrim.PhysShape);
+                        }
+                        PhysicsScene.PE.AddChildShapeToCompoundShape(LinksetRoot.PhysShape, cPrim.PhysShape, lci.OffsetPos, lci.OffsetRot);
+                    }
+                }
+                return false;   // 'false' says to move onto the next child in the list
+            });
 
-        // DEBUG: see of inter-linkset collisions are causing problems for constraint linksets.
-        // BulletSimAPI.SetCollisionFilterMask2(LinksetRoot.BSBody.ptr, 
-        //                     (uint)CollisionFilterGroups.LinksetFilter, (uint)CollisionFilterGroups.LinksetMask);
+            // With all of the linkset packed into the root prim, it has the mass of everyone.
+            LinksetMass = ComputeLinksetMass();
+            LinksetRoot.UpdatePhysicalMassProperties(LinksetMass, true);
+        }
+        finally
+        {
+            Rebuilding = false;
+        }
 
+        PhysicsScene.PE.RecalculateCompoundShapeLocalAabb(LinksetRoot.PhysShape);
     }
 }
 }
\ No newline at end of file
diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSLinksetConstraints.cs b/OpenSim/Region/Physics/BulletSPlugin/BSLinksetConstraints.cs
index c855fda..d0b2a56 100755
--- a/OpenSim/Region/Physics/BulletSPlugin/BSLinksetConstraints.cs
+++ b/OpenSim/Region/Physics/BulletSPlugin/BSLinksetConstraints.cs
@@ -36,9 +36,8 @@ public sealed class BSLinksetConstraints : BSLinkset
 {
     // private static string LogHeader = "[BULLETSIM LINKSET CONSTRAINTS]";
 
-    public BSLinksetConstraints(BSScene scene, BSPhysObject parent)
+    public BSLinksetConstraints(BSScene scene, BSPhysObject parent) : base(scene, parent)
     {
-        base.Initialize(scene, parent);
     }
 
     // When physical properties are changed the linkset needs to recalculate
@@ -47,12 +46,17 @@ public sealed class BSLinksetConstraints : BSLinkset
     //   refresh will happen once after all the other taints are applied.
     public override void Refresh(BSPhysObject requestor)
     {
-        // Queue to happen after all the other taint processing
-        PhysicsScene.PostTaintObject("BSLinksetContraints.Refresh", requestor.LocalID, delegate()
-            {
-                if (HasAnyChildren && IsRoot(requestor))
-                    RecomputeLinksetConstraints();
-            });
+        base.Refresh(requestor);
+
+        if (HasAnyChildren && IsRoot(requestor))
+        {
+            // Queue to happen after all the other taint processing
+            PhysicsScene.PostTaintObject("BSLinksetContraints.Refresh", requestor.LocalID, delegate()
+                {
+                    if (HasAnyChildren && IsRoot(requestor))
+                        RecomputeLinksetConstraints();
+                });
+        }
     }
 
     // The object is going dynamic (physical). Do any setup necessary
@@ -79,23 +83,11 @@ public sealed class BSLinksetConstraints : BSLinkset
     }
 
     // Called at taint-time!!
-    public override void UpdateProperties(BSPhysObject updated)
+    public override void UpdateProperties(BSPhysObject updated, bool inTaintTime)
     {
         // Nothing to do for constraints on property updates
     }
 
-    // The children of the linkset are moved around by the constraints.
-    // Just grab the current values of wherever it is right now.
-    public override OMV.Vector3 Position(BSPhysObject member)
-    {
-        return BulletSimAPI.GetPosition2(member.PhysBody.ptr);
-    }
-
-    public override OMV.Quaternion Orientation(BSPhysObject member)
-    {
-        return BulletSimAPI.GetOrientation2(member.PhysBody.ptr);
-    }
-
     // Routine called when rebuilding the body of some member of the linkset.
     // Destroy all the constraints have have been made to root and set
     //     up to rebuild the constraints before the next simulation step.
@@ -106,7 +98,7 @@ public sealed class BSLinksetConstraints : BSLinkset
         bool ret = false;
 
         DetailLog("{0},BSLinksetConstraint.RemoveBodyDependencies,removeChildrenForRoot,rID={1},rBody={2}",
-                                    child.LocalID, LinksetRoot.LocalID, LinksetRoot.PhysBody.ptr.ToString("X"));
+                                    child.LocalID, LinksetRoot.LocalID, LinksetRoot.PhysBody.AddrString);
 
         lock (m_linksetActivityLock)
         {
@@ -155,8 +147,8 @@ public sealed class BSLinksetConstraints : BSLinkset
 
             DetailLog("{0},BSLinksetConstraints.RemoveChildFromLinkset,call,rID={1},rBody={2},cID={3},cBody={4}",
                             childx.LocalID,
-                            rootx.LocalID, rootx.PhysBody.ptr.ToString("X"),
-                            childx.LocalID, childx.PhysBody.ptr.ToString("X"));
+                            rootx.LocalID, rootx.PhysBody.AddrString,
+                            childx.LocalID, childx.PhysBody.AddrString);
 
             PhysicsScene.TaintedObject("BSLinksetConstraints.RemoveChildFromLinkset", delegate()
             {
@@ -195,8 +187,8 @@ public sealed class BSLinksetConstraints : BSLinkset
 
         DetailLog("{0},BSLinksetConstraint.BuildConstraint,taint,root={1},rBody={2},child={3},cBody={4},rLoc={5},cLoc={6},midLoc={7}",
                                         rootPrim.LocalID,
-                                        rootPrim.LocalID, rootPrim.PhysBody.ptr.ToString("X"),
-                                        childPrim.LocalID, childPrim.PhysBody.ptr.ToString("X"),
+                                        rootPrim.LocalID, rootPrim.PhysBody.AddrString,
+                                        childPrim.LocalID, childPrim.PhysBody.AddrString,
                                         rootPrim.Position, childPrim.Position, midPoint);
 
         // create a constraint that allows no freedom of movement between the two objects
@@ -239,14 +231,14 @@ public sealed class BSLinksetConstraints : BSLinkset
         constrain.SetAngularLimits(OMV.Vector3.Zero, OMV.Vector3.Zero);
 
         // tweek the constraint to increase stability
-        constrain.UseFrameOffset(PhysicsScene.BoolNumeric(PhysicsScene.Params.linkConstraintUseFrameOffset));
-        constrain.TranslationalLimitMotor(PhysicsScene.BoolNumeric(PhysicsScene.Params.linkConstraintEnableTransMotor),
-                        PhysicsScene.Params.linkConstraintTransMotorMaxVel,
-                        PhysicsScene.Params.linkConstraintTransMotorMaxForce);
-        constrain.SetCFMAndERP(PhysicsScene.Params.linkConstraintCFM, PhysicsScene.Params.linkConstraintERP);
-        if (PhysicsScene.Params.linkConstraintSolverIterations != 0f)
+        constrain.UseFrameOffset(BSParam.BoolNumeric(BSParam.LinkConstraintUseFrameOffset));
+        constrain.TranslationalLimitMotor(BSParam.BoolNumeric(BSParam.LinkConstraintEnableTransMotor),
+                        BSParam.LinkConstraintTransMotorMaxVel,
+                        BSParam.LinkConstraintTransMotorMaxForce);
+        constrain.SetCFMAndERP(BSParam.LinkConstraintCFM, BSParam.LinkConstraintERP);
+        if (BSParam.LinkConstraintSolverIterations != 0f)
         {
-            constrain.SetSolverIterations(PhysicsScene.Params.linkConstraintSolverIterations);
+            constrain.SetSolverIterations(BSParam.LinkConstraintSolverIterations);
         }
         return constrain;
     }
@@ -260,14 +252,14 @@ public sealed class BSLinksetConstraints : BSLinkset
         bool ret = false;
         DetailLog("{0},BSLinksetConstraint.PhysicallyUnlinkAChildFromRoot,taint,root={1},rBody={2},child={3},cBody={4}",
                             rootPrim.LocalID,
-                            rootPrim.LocalID, rootPrim.PhysBody.ptr.ToString("X"),
-                            childPrim.LocalID, childPrim.PhysBody.ptr.ToString("X"));
+                            rootPrim.LocalID, rootPrim.PhysBody.AddrString,
+                            childPrim.LocalID, childPrim.PhysBody.AddrString);
 
         // Find the constraint for this link and get rid of it from the overall collection and from my list
         if (PhysicsScene.Constraints.RemoveAndDestroyConstraint(rootPrim.PhysBody, childPrim.PhysBody))
         {
             // Make the child refresh its location
-            BulletSimAPI.PushUpdate2(childPrim.PhysBody.ptr);
+            PhysicsScene.PE.PushUpdate(childPrim.PhysBody);
             ret = true;
         }
 
@@ -292,20 +284,17 @@ public sealed class BSLinksetConstraints : BSLinkset
     private void RecomputeLinksetConstraints()
     {
         float linksetMass = LinksetMass;
-        LinksetRoot.UpdatePhysicalMassProperties(linksetMass);
+        LinksetRoot.UpdatePhysicalMassProperties(linksetMass, true);
 
-        // DEBUG: see of inter-linkset collisions are causing problems
-        // BulletSimAPI.SetCollisionFilterMask2(LinksetRoot.BSBody.ptr, 
-        //                     (uint)CollisionFilterGroups.LinksetFilter, (uint)CollisionFilterGroups.LinksetMask);
         DetailLog("{0},BSLinksetConstraint.RecomputeLinksetConstraints,set,rBody={1},linksetMass={2}",
-                            LinksetRoot.LocalID, LinksetRoot.PhysBody.ptr.ToString("X"), linksetMass);
+                            LinksetRoot.LocalID, LinksetRoot.PhysBody.AddrString, linksetMass);
 
         foreach (BSPhysObject child in m_children)
         {
             // A child in the linkset physically shows the mass of the whole linkset.
             // This allows Bullet to apply enough force on the child to move the whole linkset.
             // (Also do the mass stuff before recomputing the constraint so mass is not zero.)
-            child.UpdatePhysicalMassProperties(linksetMass);
+            child.UpdatePhysicalMassProperties(linksetMass, true);
 
             BSConstraint constrain;
             if (!PhysicsScene.Constraints.TryGetConstraint(LinksetRoot.PhysBody, child.PhysBody, out constrain))
@@ -315,11 +304,7 @@ public sealed class BSLinksetConstraints : BSLinkset
             }
             constrain.RecomputeConstraintVariables(linksetMass);
 
-            // DEBUG: see of inter-linkset collisions are causing problems
-            // BulletSimAPI.SetCollisionFilterMask2(child.BSBody.ptr, 
-            //                 (uint)CollisionFilterGroups.LinksetFilter, (uint)CollisionFilterGroups.LinksetMask);
-
-            // BulletSimAPI.DumpConstraint2(PhysicsScene.World.ptr, constrain.Constraint.ptr);    // DEBUG DEBUG
+            // PhysicsScene.PE.DumpConstraint(PhysicsScene.World, constrain.Constraint);    // DEBUG DEBUG
         }
 
     }
diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSMaterials.cs b/OpenSim/Region/Physics/BulletSPlugin/BSMaterials.cs
new file mode 100755
index 0000000..92d62ff
--- /dev/null
+++ b/OpenSim/Region/Physics/BulletSPlugin/BSMaterials.cs
@@ -0,0 +1,200 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyrightD
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+using System;
+using System.Collections.Generic;
+using System.Text;
+using System.Reflection;
+using Nini.Config;
+
+namespace OpenSim.Region.Physics.BulletSPlugin
+{
+
+public struct MaterialAttributes
+{
+    // Material type values that correspond with definitions for LSL
+    public enum Material : int
+    {
+        Stone = 0,
+        Metal,
+        Glass,
+        Wood,
+        Flesh,
+        Plastic,
+        Rubber,
+        Light,
+        // Hereafter are BulletSim additions
+        Avatar,
+        NumberOfTypes   // the count of types in the enum.
+    }
+
+    // Names must be in the order of the above enum.
+    // These names must coorespond to the lower case field names in the MaterialAttributes
+    //     structure as reflection is used to select the field to put the value in.
+    public static readonly string[] MaterialAttribs = { "Density", "Friction", "Restitution"};
+
+    public MaterialAttributes(string t, float d, float f, float r)
+    {
+        type = t;
+        density = d;
+        friction = f;
+        restitution = r;
+    }
+    public string type;
+    public float density;
+    public float friction;
+    public float restitution;
+}
+
+public static class BSMaterials
+{
+    // Attributes for each material type
+    private static readonly MaterialAttributes[] Attributes;
+
+    // Map of material name to material type code
+    public static readonly Dictionary<string, MaterialAttributes.Material> MaterialMap;
+
+    static BSMaterials()
+    {
+        // Attribute sets for both the non-physical and physical instances of materials.
+        Attributes = new MaterialAttributes[(int)MaterialAttributes.Material.NumberOfTypes * 2];
+
+        // Map of name to type code.
+        MaterialMap = new Dictionary<string, MaterialAttributes.Material>();
+        MaterialMap.Add("Stone", MaterialAttributes.Material.Stone);
+        MaterialMap.Add("Metal", MaterialAttributes.Material.Metal);
+        MaterialMap.Add("Glass", MaterialAttributes.Material.Glass);
+        MaterialMap.Add("Wood", MaterialAttributes.Material.Wood);
+        MaterialMap.Add("Flesh", MaterialAttributes.Material.Flesh);
+        MaterialMap.Add("Plastic", MaterialAttributes.Material.Plastic);
+        MaterialMap.Add("Rubber", MaterialAttributes.Material.Rubber);
+        MaterialMap.Add("Light", MaterialAttributes.Material.Light);
+        MaterialMap.Add("Avatar", MaterialAttributes.Material.Avatar);
+    }
+
+    // This is where all the default material attributes are defined.
+    public static void InitializeFromDefaults(ConfigurationParameters parms)
+    {
+        // Values from http://wiki.secondlife.com/wiki/PRIM_MATERIAL
+        float dDensity = parms.defaultDensity;
+        float dFriction = parms.defaultFriction;
+        float dRestitution = parms.defaultRestitution;
+        Attributes[(int)MaterialAttributes.Material.Stone] =
+                    new MaterialAttributes("stone",dDensity, 0.8f, 0.4f);
+        Attributes[(int)MaterialAttributes.Material.Metal] =
+                    new MaterialAttributes("metal",dDensity, 0.3f, 0.4f);
+        Attributes[(int)MaterialAttributes.Material.Glass] =
+                    new MaterialAttributes("glass",dDensity, 0.2f, 0.7f);
+        Attributes[(int)MaterialAttributes.Material.Wood] =
+                    new MaterialAttributes("wood",dDensity, 0.6f, 0.5f);
+        Attributes[(int)MaterialAttributes.Material.Flesh] =
+                    new MaterialAttributes("flesh",dDensity, 0.9f, 0.3f);
+        Attributes[(int)MaterialAttributes.Material.Plastic] =
+                    new MaterialAttributes("plastic",dDensity, 0.4f, 0.7f);
+        Attributes[(int)MaterialAttributes.Material.Rubber] =
+                    new MaterialAttributes("rubber",dDensity, 0.9f, 0.9f);
+        Attributes[(int)MaterialAttributes.Material.Light] =
+                    new MaterialAttributes("light",dDensity, dFriction, dRestitution);
+        Attributes[(int)MaterialAttributes.Material.Avatar] =
+                    new MaterialAttributes("avatar",3.5f, 0.2f, 0f);
+
+        Attributes[(int)MaterialAttributes.Material.Stone + (int)MaterialAttributes.Material.NumberOfTypes] =
+                    new MaterialAttributes("stonePhysical",dDensity, 0.8f, 0.4f);
+        Attributes[(int)MaterialAttributes.Material.Metal + (int)MaterialAttributes.Material.NumberOfTypes] =
+                    new MaterialAttributes("metalPhysical",dDensity, 0.3f, 0.4f);
+        Attributes[(int)MaterialAttributes.Material.Glass + (int)MaterialAttributes.Material.NumberOfTypes] =
+                    new MaterialAttributes("glassPhysical",dDensity, 0.2f, 0.7f);
+        Attributes[(int)MaterialAttributes.Material.Wood + (int)MaterialAttributes.Material.NumberOfTypes] =
+                    new MaterialAttributes("woodPhysical",dDensity, 0.6f, 0.5f);
+        Attributes[(int)MaterialAttributes.Material.Flesh + (int)MaterialAttributes.Material.NumberOfTypes] =
+                    new MaterialAttributes("fleshPhysical",dDensity, 0.9f, 0.3f);
+        Attributes[(int)MaterialAttributes.Material.Plastic + (int)MaterialAttributes.Material.NumberOfTypes] =
+                    new MaterialAttributes("plasticPhysical",dDensity, 0.4f, 0.7f);
+        Attributes[(int)MaterialAttributes.Material.Rubber + (int)MaterialAttributes.Material.NumberOfTypes] =
+                    new MaterialAttributes("rubberPhysical",dDensity, 0.9f, 0.9f);
+        Attributes[(int)MaterialAttributes.Material.Light + (int)MaterialAttributes.Material.NumberOfTypes] =
+                    new MaterialAttributes("lightPhysical",dDensity, dFriction, dRestitution);
+        Attributes[(int)MaterialAttributes.Material.Avatar + (int)MaterialAttributes.Material.NumberOfTypes] =
+                    new MaterialAttributes("avatarPhysical",3.5f, 0.2f, 0f);
+    }
+
+    // Under the [BulletSim] section, one can change the individual material
+    //    attribute values. The format of the configuration parameter is:
+    //        <materialName><Attribute>["Physical"] = floatValue
+    //    For instance:
+    //        [BulletSim]
+    //             StoneFriction = 0.2
+    //             FleshRestitutionPhysical = 0.8
+    // Materials can have different parameters for their static and
+    //    physical instantiations. When setting the non-physical value,
+    //    both values are changed. Setting the physical value only changes
+    //    the physical value.
+    public static void InitializefromParameters(IConfig pConfig)
+    {
+        foreach (KeyValuePair<string, MaterialAttributes.Material> kvp in MaterialMap)
+        {
+            string matName = kvp.Key;
+            foreach (string attribName in MaterialAttributes.MaterialAttribs)
+            {
+                string paramName = matName + attribName;
+                if (pConfig.Contains(paramName))
+                {
+                    float paramValue = pConfig.GetFloat(paramName);
+                    SetAttributeValue((int)kvp.Value, attribName, paramValue);
+                    // set the physical value also
+                    SetAttributeValue((int)kvp.Value + (int)MaterialAttributes.Material.NumberOfTypes, attribName, paramValue);
+                }
+                paramName += "Physical";
+                if (pConfig.Contains(paramName))
+                {
+                    float paramValue = pConfig.GetFloat(paramName);
+                    SetAttributeValue((int)kvp.Value + (int)MaterialAttributes.Material.NumberOfTypes, attribName, paramValue);
+                }
+            }
+        }
+    }
+
+    // Use reflection to set the value in the attribute structure.
+    private static void SetAttributeValue(int matType, string attribName, float val)
+    {
+        MaterialAttributes thisAttrib = Attributes[matType];
+        FieldInfo fieldInfo = thisAttrib.GetType().GetField(attribName.ToLower());
+        if (fieldInfo != null)
+        {
+            fieldInfo.SetValue(thisAttrib, val);
+            Attributes[matType] = thisAttrib;
+        }
+    }
+
+    // Given a material type, return a structure of attributes.
+    public static MaterialAttributes GetAttributes(MaterialAttributes.Material type, bool isPhysical)
+    {
+        int ind = (int)type;
+        if (isPhysical) ind += (int)MaterialAttributes.Material.NumberOfTypes;
+        return Attributes[ind];
+    }
+}
+}
diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSMotors.cs b/OpenSim/Region/Physics/BulletSPlugin/BSMotors.cs
index bc6e4c4..6d0db2e 100755
--- a/OpenSim/Region/Physics/BulletSPlugin/BSMotors.cs
+++ b/OpenSim/Region/Physics/BulletSPlugin/BSMotors.cs
@@ -1,104 +1,467 @@
-using System;

-using System.Collections.Generic;

-using System.Text;

-using OpenMetaverse;

-

-namespace OpenSim.Region.Physics.BulletSPlugin

-{

-public abstract class BSMotor

-{

-    public virtual void Reset() { }

-    public virtual void Zero() { }

-}

-// Can all the incremental stepping be replaced with motor classes?

-public class BSVMotor : BSMotor

-{

-    public Vector3 FrameOfReference { get; set; }

-    public Vector3 Offset { get; set; }

-

-    public float TimeScale { get; set; }

-    public float TargetValueDecayTimeScale { get; set; }

-    public Vector3 CurrentValueReductionTimescale { get; set; }

-    public float Efficiency { get; set; }

-

-    public Vector3 TargetValue { get; private set; }

-    public Vector3 CurrentValue { get; private set; }

-

-

-

-    BSVMotor(float timeScale, float decayTimeScale, Vector3 frictionTimeScale, float efficiency)

-    {

-        TimeScale = timeScale;

-        TargetValueDecayTimeScale = decayTimeScale;

-        CurrentValueReductionTimescale = frictionTimeScale;

-        Efficiency = efficiency;

-    }

-    public void SetCurrent(Vector3 current)

-    {

-        CurrentValue = current;

-    }

-    public void SetTarget(Vector3 target)

-    {

-        TargetValue = target;

-    }

-    public Vector3 Step(float timeStep)

-    {

-        if (CurrentValue.LengthSquared() > 0.001f)

-        {

-            // Vector3 origDir = Target;       // DEBUG

-            // Vector3 origVel = CurrentValue;   // DEBUG

-

-            // Add (desiredVelocity - currentAppliedVelocity) / howLongItShouldTakeToComplete

-            Vector3 addAmount = (TargetValue - CurrentValue)/(TargetValue) * timeStep;

-            CurrentValue += addAmount;

-

-            float decayFactor = (1.0f / TargetValueDecayTimeScale) * timeStep;

-            TargetValue *= (1f - decayFactor);

-

-            Vector3 frictionFactor = (Vector3.One / CurrentValueReductionTimescale) * timeStep;

-            CurrentValue *= (Vector3.One - frictionFactor);

-        }

-        else

-        {

-            // if what remains of direction is very small, zero it.

-            TargetValue = Vector3.Zero;

-            CurrentValue = Vector3.Zero;

-

-            // VDetailLog("{0},MoveLinear,zeroed", Prim.LocalID);

-        }

-        return CurrentValue;

-    }

-}

-

-public class BSFMotor : BSMotor

-{

-    public float TimeScale { get; set; }

-    public float DecayTimeScale { get; set; }

-    public float Friction { get; set; }

-    public float Efficiency { get; set; }

-

-    public float Target { get; private set; }

-    public float CurrentValue { get; private set; }

-

-    BSFMotor(float timeScale, float decayTimescale, float friction, float efficiency)

-    {

-    }

-    public void SetCurrent(float target)

-    {

-    }

-    public void SetTarget(float target)

-    {

-    }

-    public float Step(float timeStep)

-    {

-        return 0f;

-    }

-}

-public class BSPIDMotor : BSMotor

-{

-    // TODO: write and use this one

-    BSPIDMotor()

-    {

-    }

-}

-}

+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+using System;
+using System.Collections.Generic;
+using System.Text;
+using OpenMetaverse;
+using OpenSim.Framework;
+
+namespace OpenSim.Region.Physics.BulletSPlugin
+{
+public abstract class BSMotor
+{
+    // Timescales and other things can be turned off by setting them to 'infinite'.
+    public const float Infinite = 12345.6f;
+    public readonly static Vector3 InfiniteVector = new Vector3(BSMotor.Infinite, BSMotor.Infinite, BSMotor.Infinite);
+
+    public BSMotor(string useName)
+    {
+        UseName = useName;
+        PhysicsScene = null;
+        Enabled = true;
+    }
+    public virtual bool Enabled { get; set; }
+    public virtual void Reset() { }
+    public virtual void Zero() { }
+    public virtual void GenerateTestOutput(float timeStep) { }
+
+    // A name passed at motor creation for easily identifyable debugging messages.
+    public string UseName { get; private set; }
+
+    // Used only for outputting debug information. Might not be set so check for null.
+    public BSScene PhysicsScene { get; set; }
+    protected void MDetailLog(string msg, params Object[] parms)
+    {
+        if (PhysicsScene != null)
+        {
+            PhysicsScene.DetailLog(msg, parms);
+        }
+    }
+}
+
+// Motor which moves CurrentValue to TargetValue over TimeScale seconds.
+// The TargetValue decays in TargetValueDecayTimeScale and
+//     the CurrentValue will be held back by FrictionTimeScale.
+// This motor will "zero itself" over time in that the targetValue will
+//    decay to zero and the currentValue will follow it to that zero.
+//    The overall effect is for the returned correction value to go from large
+//    values (the total difference between current and target minus friction)
+//    to small and eventually zero values.
+// TimeScale and TargetDelayTimeScale may be 'infinite' which means no decay.
+
+// For instance, if something is moving at speed X and the desired speed is Y,
+//    CurrentValue is X and TargetValue is Y. As the motor is stepped, new
+//    values of CurrentValue are returned that approach the TargetValue.
+// The feature of decaying TargetValue is so vehicles will eventually
+//    come to a stop rather than run forever. This can be disabled by
+//    setting TargetValueDecayTimescale to 'infinite'.
+// The change from CurrentValue to TargetValue is linear over TimeScale seconds.
+public class BSVMotor : BSMotor
+{
+    // public Vector3 FrameOfReference { get; set; }
+    // public Vector3 Offset { get; set; }
+
+    public virtual float TimeScale { get; set; }
+    public virtual float TargetValueDecayTimeScale { get; set; }
+    public virtual Vector3 FrictionTimescale { get; set; }
+    public virtual float Efficiency { get; set; }
+
+    public virtual float ErrorZeroThreshold { get; set; }
+
+    public virtual Vector3 TargetValue { get; protected set; }
+    public virtual Vector3 CurrentValue { get; protected set; }
+    public virtual Vector3 LastError { get; protected set; }
+
+    public virtual bool ErrorIsZero()
+    {
+        return ErrorIsZero(LastError);
+    }
+    public virtual bool ErrorIsZero(Vector3 err)
+    { 
+        return (err == Vector3.Zero || err.ApproxEquals(Vector3.Zero, ErrorZeroThreshold));
+    }
+
+    public BSVMotor(string useName)
+        : base(useName)
+    {
+        TimeScale = TargetValueDecayTimeScale = BSMotor.Infinite;
+        Efficiency = 1f;
+        FrictionTimescale = BSMotor.InfiniteVector;
+        CurrentValue = TargetValue = Vector3.Zero;
+        ErrorZeroThreshold = 0.001f;
+    }
+    public BSVMotor(string useName, float timeScale, float decayTimeScale, Vector3 frictionTimeScale, float efficiency) 
+        : this(useName)
+    {
+        TimeScale = timeScale;
+        TargetValueDecayTimeScale = decayTimeScale;
+        FrictionTimescale = frictionTimeScale;
+        Efficiency = efficiency;
+        CurrentValue = TargetValue = Vector3.Zero;
+    }
+    public void SetCurrent(Vector3 current)
+    {
+        CurrentValue = current;
+    }
+    public void SetTarget(Vector3 target)
+    {
+        TargetValue = target;
+    }
+    public override void Zero()
+    {
+        base.Zero();
+        CurrentValue = TargetValue = Vector3.Zero;
+    }
+
+    // Compute the next step and return the new current value
+    public virtual Vector3 Step(float timeStep)
+    {
+        if (!Enabled) return TargetValue;
+
+        Vector3 origTarget = TargetValue;       // DEBUG
+        Vector3 origCurrVal = CurrentValue;     // DEBUG
+
+        Vector3 correction = Vector3.Zero;
+        Vector3 error = TargetValue - CurrentValue;
+        if (!ErrorIsZero(error))
+        {
+            correction = Step(timeStep, error);
+
+            CurrentValue += correction;
+
+            // The desired value reduces to zero which also reduces the difference with current.
+            // If the decay time is infinite, don't decay at all.
+            float decayFactor = 0f;
+            if (TargetValueDecayTimeScale != BSMotor.Infinite)
+            {
+                decayFactor = (1.0f / TargetValueDecayTimeScale) * timeStep;
+                TargetValue *= (1f - decayFactor);
+            }
+
+            // The amount we can correct the error is reduced by the friction
+            Vector3 frictionFactor = Vector3.Zero;
+            if (FrictionTimescale != BSMotor.InfiniteVector)
+            {
+                // frictionFactor = (Vector3.One / FrictionTimescale) * timeStep;
+                // Individual friction components can be 'infinite' so compute each separately.
+                frictionFactor.X = (FrictionTimescale.X == BSMotor.Infinite) ? 0f : (1f / FrictionTimescale.X);
+                frictionFactor.Y = (FrictionTimescale.Y == BSMotor.Infinite) ? 0f : (1f / FrictionTimescale.Y);
+                frictionFactor.Z = (FrictionTimescale.Z == BSMotor.Infinite) ? 0f : (1f / FrictionTimescale.Z);
+                frictionFactor *= timeStep;
+                CurrentValue *= (Vector3.One - frictionFactor);
+            }
+
+            MDetailLog("{0},  BSVMotor.Step,nonZero,{1},origCurr={2},origTarget={3},timeStep={4},err={5},corr={6}",
+                                BSScene.DetailLogZero, UseName, origCurrVal, origTarget,
+                                timeStep, error, correction);
+            MDetailLog("{0},  BSVMotor.Step,nonZero,{1},tgtDecayTS={2},decayFact={3},frictTS={4},frictFact={5},tgt={6},curr={7}",
+                                BSScene.DetailLogZero, UseName,
+                                TargetValueDecayTimeScale, decayFactor, FrictionTimescale, frictionFactor,
+                                TargetValue, CurrentValue);
+        }
+        else
+        {
+            // Difference between what we have and target is small. Motor is done.
+            CurrentValue = TargetValue;
+            MDetailLog("{0},  BSVMotor.Step,zero,{1},origTgt={2},origCurr={3},ret={4}",
+                        BSScene.DetailLogZero, UseName, origCurrVal, origTarget, CurrentValue);
+        }
+
+        return CurrentValue;
+    }
+    public virtual Vector3 Step(float timeStep, Vector3 error)
+    {
+        if (!Enabled) return Vector3.Zero;
+
+        LastError = error;
+        Vector3 returnCorrection = Vector3.Zero;
+        if (!ErrorIsZero())
+        {
+            // correction =  error / secondsItShouldTakeToCorrect
+            Vector3 correctionAmount;
+            if (TimeScale == 0f || TimeScale == BSMotor.Infinite)
+                correctionAmount = error * timeStep;
+            else
+                correctionAmount = error / TimeScale * timeStep;
+
+            returnCorrection = correctionAmount;
+            MDetailLog("{0},  BSVMotor.Step,nonZero,{1},timeStep={2},timeScale={3},err={4},corr={5}",
+                                    BSScene.DetailLogZero, UseName, timeStep, TimeScale, error, correctionAmount);
+        }
+        return returnCorrection;
+    }
+
+    // The user sets all the parameters and calls this which outputs values until error is zero.
+    public override void GenerateTestOutput(float timeStep)
+    {
+        // maximum number of outputs to generate.
+        int maxOutput = 50;
+        MDetailLog("{0},BSVMotor.Test,{1},===================================== BEGIN Test Output", BSScene.DetailLogZero, UseName);
+        MDetailLog("{0},BSVMotor.Test,{1},timeScale={2},targDlyTS={3},frictTS={4},eff={5},curr={6},tgt={7}",
+                                BSScene.DetailLogZero, UseName,
+                                TimeScale, TargetValueDecayTimeScale, FrictionTimescale, Efficiency, 
+                                CurrentValue, TargetValue);
+
+        LastError = BSMotor.InfiniteVector;
+        while (maxOutput-- > 0 && !LastError.ApproxEquals(Vector3.Zero, ErrorZeroThreshold))
+        {
+            Vector3 lastStep = Step(timeStep);
+            MDetailLog("{0},BSVMotor.Test,{1},cur={2},tgt={3},lastError={4},lastStep={5}",
+                            BSScene.DetailLogZero, UseName, CurrentValue, TargetValue, LastError, lastStep);
+        }
+        MDetailLog("{0},BSVMotor.Test,{1},===================================== END Test Output", BSScene.DetailLogZero, UseName);
+        
+
+    }
+
+    public override string ToString()
+    {
+        return String.Format("<{0},curr={1},targ={2},lastErr={3},decayTS={4},frictTS={5}>",
+            UseName, CurrentValue, TargetValue, LastError, TargetValueDecayTimeScale, FrictionTimescale);
+    }
+}
+
+// ============================================================================
+// ============================================================================
+public class BSFMotor : BSMotor
+{
+    public virtual float TimeScale { get; set; }
+    public virtual float TargetValueDecayTimeScale { get; set; }
+    public virtual float FrictionTimescale { get; set; }
+    public virtual float Efficiency { get; set; }
+
+    public virtual float ErrorZeroThreshold { get; set; }
+
+    public virtual float TargetValue { get; protected set; }
+    public virtual float CurrentValue { get; protected set; }
+    public virtual float LastError { get; protected set; }
+
+    public virtual bool ErrorIsZero()
+    {
+        return ErrorIsZero(LastError);
+    }
+    public virtual bool ErrorIsZero(float err)
+    { 
+        return (err >= -ErrorZeroThreshold && err <= ErrorZeroThreshold);
+    }
+
+    public BSFMotor(string useName, float timeScale, float decayTimescale, float friction, float efficiency)
+        : base(useName)
+    {
+        TimeScale = TargetValueDecayTimeScale = BSMotor.Infinite;
+        Efficiency = 1f;
+        FrictionTimescale = BSMotor.Infinite;
+        CurrentValue = TargetValue = 0f;
+        ErrorZeroThreshold = 0.01f;
+    }
+    public void SetCurrent(float current)
+    {
+        CurrentValue = current;
+    }
+    public void SetTarget(float target)
+    {
+        TargetValue = target;
+    }
+    public override void Zero()
+    {
+        base.Zero();
+        CurrentValue = TargetValue = 0f;
+    }
+
+    public virtual float Step(float timeStep)
+    {
+        if (!Enabled) return TargetValue;
+
+        float origTarget = TargetValue;       // DEBUG
+        float origCurrVal = CurrentValue;     // DEBUG
+
+        float correction = 0f;
+        float error = TargetValue - CurrentValue;
+        if (!ErrorIsZero(error))
+        {
+            correction = Step(timeStep, error);
+
+            CurrentValue += correction;
+
+            // The desired value reduces to zero which also reduces the difference with current.
+            // If the decay time is infinite, don't decay at all.
+            float decayFactor = 0f;
+            if (TargetValueDecayTimeScale != BSMotor.Infinite)
+            {
+                decayFactor = (1.0f / TargetValueDecayTimeScale) * timeStep;
+                TargetValue *= (1f - decayFactor);
+            }
+
+            // The amount we can correct the error is reduced by the friction
+            float frictionFactor = 0f;
+            if (FrictionTimescale != BSMotor.Infinite)
+            {
+                // frictionFactor = (Vector3.One / FrictionTimescale) * timeStep;
+                // Individual friction components can be 'infinite' so compute each separately.
+                frictionFactor = 1f / FrictionTimescale;
+                frictionFactor *= timeStep;
+                CurrentValue *= (1f - frictionFactor);
+            }
+
+            MDetailLog("{0},  BSFMotor.Step,nonZero,{1},origCurr={2},origTarget={3},timeStep={4},err={5},corr={6}",
+                                BSScene.DetailLogZero, UseName, origCurrVal, origTarget,
+                                timeStep, error, correction);
+            MDetailLog("{0},  BSFMotor.Step,nonZero,{1},tgtDecayTS={2},decayFact={3},frictTS={4},frictFact={5},tgt={6},curr={7}",
+                                BSScene.DetailLogZero, UseName,
+                                TargetValueDecayTimeScale, decayFactor, FrictionTimescale, frictionFactor,
+                                TargetValue, CurrentValue);
+        }
+        else
+        {
+            // Difference between what we have and target is small. Motor is done.
+            CurrentValue = TargetValue;
+            MDetailLog("{0},  BSFMotor.Step,zero,{1},origTgt={2},origCurr={3},ret={4}",
+                        BSScene.DetailLogZero, UseName, origCurrVal, origTarget, CurrentValue);
+        }
+
+        return CurrentValue;
+    }
+
+    public virtual float Step(float timeStep, float error)
+    {
+        if (!Enabled) return 0f;
+
+        LastError = error;
+        float returnCorrection = 0f;
+        if (!ErrorIsZero())
+        {
+            // correction =  error / secondsItShouldTakeToCorrect
+            float correctionAmount;
+            if (TimeScale == 0f || TimeScale == BSMotor.Infinite)
+                correctionAmount = error * timeStep;
+            else
+                correctionAmount = error / TimeScale * timeStep;
+
+            returnCorrection = correctionAmount;
+            MDetailLog("{0},  BSFMotor.Step,nonZero,{1},timeStep={2},timeScale={3},err={4},corr={5}",
+                                    BSScene.DetailLogZero, UseName, timeStep, TimeScale, error, correctionAmount);
+        }
+        return returnCorrection;
+    }
+
+    public override string ToString()
+    {
+        return String.Format("<{0},curr={1},targ={2},lastErr={3},decayTS={4},frictTS={5}>",
+            UseName, CurrentValue, TargetValue, LastError, TargetValueDecayTimeScale, FrictionTimescale);
+    }
+
+}
+
+// ============================================================================
+// ============================================================================
+// Proportional, Integral, Derivitive Motor
+// Good description at http://www.answers.com/topic/pid-controller . Includes processes for choosing p, i and d factors.
+public class BSPIDVMotor : BSVMotor
+{
+    // Larger makes more overshoot, smaller means converge quicker. Range of 0.1 to 10.
+    public Vector3 proportionFactor { get; set; }
+    public Vector3 integralFactor { get; set; }
+    public Vector3 derivFactor { get; set; }
+
+    // The factors are vectors for the three dimensions. This is the proportional of each
+    //    that is applied. This could be multiplied through the actual factors but it
+    //    is sometimes easier to manipulate the factors and their mix separately.
+    //      to 
+    public Vector3 FactorMix;
+
+    // Arbritrary factor range.
+    // EfficiencyHigh means move quickly to the correct number. EfficiencyLow means might over correct.
+    public float EfficiencyHigh = 0.4f;
+    public float EfficiencyLow = 4.0f;
+
+    // Running integration of the error
+    Vector3 RunningIntegration { get; set; }
+
+    public BSPIDVMotor(string useName)
+        : base(useName)
+    {
+        proportionFactor = new Vector3(1.00f, 1.00f, 1.00f);
+        integralFactor = new Vector3(1.00f, 1.00f, 1.00f);
+        derivFactor = new Vector3(1.00f, 1.00f, 1.00f);
+        FactorMix = new Vector3(0.5f, 0.25f, 0.25f);
+        RunningIntegration = Vector3.Zero;
+        LastError = Vector3.Zero;
+    }
+
+    public override void Zero()
+    {
+        base.Zero();
+    }
+
+    public override float Efficiency
+    {
+        get { return base.Efficiency; }
+        set
+        {
+            base.Efficiency = Util.Clamp(value, 0f, 1f);
+
+            // Compute factors based on efficiency.
+            // If efficiency is high (1f), use a factor value that moves the error value to zero with little overshoot.
+            // If efficiency is low (0f), use a factor value that overcorrects.
+            // TODO: might want to vary contribution of different factor depending on efficiency.
+            float factor = ((1f - this.Efficiency) * EfficiencyHigh + EfficiencyLow) / 3f;
+            // float factor = (1f - this.Efficiency) * EfficiencyHigh + EfficiencyLow;
+
+            proportionFactor = new Vector3(factor, factor, factor);
+            integralFactor = new Vector3(factor, factor, factor);
+            derivFactor = new Vector3(factor, factor, factor);
+
+            MDetailLog("{0},BSPIDVMotor.setEfficiency,eff={1},factor={2}", BSScene.DetailLogZero, Efficiency, factor);
+        }
+    }
+
+    // Ignore Current and Target Values and just advance the PID computation on this error.
+    public override Vector3 Step(float timeStep, Vector3 error)
+    {
+        if (!Enabled) return Vector3.Zero;
+
+        // Add up the error so we can integrate over the accumulated errors
+        RunningIntegration += error * timeStep;
+
+        // A simple derivitive is the rate of change from the last error.
+        Vector3 derivitive = (error - LastError) * timeStep;
+        LastError = error;
+
+        // Correction = (proportionOfPresentError + accumulationOfPastError + rateOfChangeOfError)
+        Vector3 ret   =   error * timeStep   * proportionFactor * FactorMix.X
+                        + RunningIntegration * integralFactor   * FactorMix.Y
+                        + derivitive         * derivFactor      * FactorMix.Z
+                        ;
+
+        MDetailLog("{0},BSPIDVMotor.step,ts={1},err={2},runnInt={3},deriv={4},ret={5}",
+                        BSScene.DetailLogZero, timeStep, error, RunningIntegration, derivitive, ret);
+
+        return ret;
+    }
+}
+}
diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSParam.cs b/OpenSim/Region/Physics/BulletSPlugin/BSParam.cs
new file mode 100755
index 0000000..23d573f
--- /dev/null
+++ b/OpenSim/Region/Physics/BulletSPlugin/BSParam.cs
@@ -0,0 +1,628 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyrightD
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+using System;
+using System.Collections.Generic;
+using System.Text;
+
+using OpenSim.Region.Physics.Manager;
+
+using OpenMetaverse;
+using Nini.Config;
+
+namespace OpenSim.Region.Physics.BulletSPlugin
+{
+public static class BSParam
+{
+    // Level of Detail values kept as float because that's what the Meshmerizer wants
+    public static float MeshLOD { get; private set; }
+    public static float MeshMegaPrimLOD { get; private set; }
+    public static float MeshMegaPrimThreshold { get; private set; }
+    public static float SculptLOD { get; private set; }
+
+    public static float MinimumObjectMass { get; private set; }
+    public static float MaximumObjectMass { get; private set; }
+
+    public static float LinearDamping { get; private set; }
+    public static float AngularDamping { get; private set; }
+    public static float DeactivationTime { get; private set; }
+    public static float LinearSleepingThreshold { get; private set; }
+    public static float AngularSleepingThreshold { get; private set; }
+        public static float CcdMotionThreshold { get; private set; }
+        public static float CcdSweptSphereRadius { get; private set; }
+    public static float ContactProcessingThreshold { get; private set; }
+
+    public static bool ShouldMeshSculptedPrim { get; private set; }   // cause scuplted prims to get meshed
+    public static bool ShouldForceSimplePrimMeshing { get; private set; }   // if a cube or sphere, let Bullet do internal shapes
+    public static bool ShouldUseHullsForPhysicalObjects { get; private set; }   // 'true' if should create hulls for physical objects
+
+    public static float TerrainImplementation { get; private set; }
+    public static float TerrainFriction { get; private set; }
+    public static float TerrainHitFraction { get; private set; }
+    public static float TerrainRestitution { get; private set; }
+    public static float TerrainCollisionMargin { get; private set; }
+
+    // Avatar parameters
+    public static float AvatarFriction { get; private set; }
+    public static float AvatarStandingFriction { get; private set; }
+    public static float AvatarAlwaysRunFactor { get; private set; }
+    public static float AvatarDensity { get; private set; }
+    public static float AvatarRestitution { get; private set; }
+    public static float AvatarCapsuleWidth { get; private set; }
+    public static float AvatarCapsuleDepth { get; private set; }
+    public static float AvatarCapsuleHeight { get; private set; }
+        public static float AvatarContactProcessingThreshold { get; private set; }
+        public static float AvatarStepHeight { get; private set; }
+        public static float AvatarStepApproachFactor { get; private set; }
+        public static float AvatarStepForceFactor { get; private set; }
+
+    public static float VehicleAngularDamping { get; private set; }
+
+    public static float LinksetImplementation { get; private set; }
+    public static float LinkConstraintUseFrameOffset { get; private set; }
+    public static float LinkConstraintEnableTransMotor { get; private set; }
+    public static float LinkConstraintTransMotorMaxVel { get; private set; }
+    public static float LinkConstraintTransMotorMaxForce { get; private set; }
+    public static float LinkConstraintERP { get; private set; }
+    public static float LinkConstraintCFM { get; private set; }
+    public static float LinkConstraintSolverIterations { get; private set; }
+
+    public static float PID_D { get; private set; }    // derivative
+    public static float PID_P { get; private set; }    // proportional
+
+    // Various constants that come from that other virtual world that shall not be named
+    public const float MinGravityZ = -1f;
+    public const float MaxGravityZ = 28f;
+    public const float MinFriction = 0f;
+    public const float MaxFriction = 255f;
+    public const float MinDensity = 0f;
+    public const float MaxDensity = 22587f;
+    public const float MinRestitution = 0f;
+    public const float MaxRestitution = 1f;
+    public const float MaxAddForceMagnitude = 20000f;
+
+    // ===========================================================================
+    public delegate void ParamUser(BSScene scene, IConfig conf, string paramName, float val);
+    public delegate float ParamGet(BSScene scene);
+    public delegate void ParamSet(BSScene scene, string paramName, uint localID, float val);
+    public delegate void SetOnObject(BSScene scene, BSPhysObject obj, float val);
+
+    public struct ParameterDefn
+    {
+        public string name;         // string name of the parameter
+        public string desc;         // a short description of what the parameter means
+        public float defaultValue;  // default value if not specified anywhere else
+        public ParamUser userParam; // get the value from the configuration file
+        public ParamGet getter;     // return the current value stored for this parameter
+        public ParamSet setter;     // set the current value for this parameter
+        public SetOnObject onObject;    // set the value on an object in the physical domain
+        public ParameterDefn(string n, string d, float v, ParamUser u, ParamGet g, ParamSet s)
+        {
+            name = n;
+            desc = d;
+            defaultValue = v;
+            userParam = u;
+            getter = g;
+            setter = s;
+            onObject = null;
+        }
+        public ParameterDefn(string n, string d, float v, ParamUser u, ParamGet g, ParamSet s, SetOnObject o)
+        {
+            name = n;
+            desc = d;
+            defaultValue = v;
+            userParam = u;
+            getter = g;
+            setter = s;
+            onObject = o;
+        }
+    }
+
+    // List of all of the externally visible parameters.
+    // For each parameter, this table maps a text name to getter and setters.
+    // To add a new externally referencable/settable parameter, add the paramter storage
+    //    location somewhere in the program and make an entry in this table with the
+    //    getters and setters.
+    // It is easiest to find an existing definition and copy it.
+    // Parameter values are floats. Booleans are converted to a floating value.
+    //
+    // A ParameterDefn() takes the following parameters:
+    //    -- the text name of the parameter. This is used for console input and ini file.
+    //    -- a short text description of the parameter. This shows up in the console listing.
+    //    -- a default value (float)
+    //    -- a delegate for fetching the parameter from the ini file.
+    //          Should handle fetching the right type from the ini file and converting it.
+    //    -- a delegate for getting the value as a float
+    //    -- a delegate for setting the value from a float
+    //    -- an optional delegate to update the value in the world. Most often used to
+    //          push the new value to an in-world object.
+    //
+    // The single letter parameters for the delegates are:
+    //    s = BSScene
+    //    o = BSPhysObject
+    //    p = string parameter name
+    //    l = localID of referenced object
+    //    v = value (float)
+    //    cf = parameter configuration class (for fetching values from ini file)
+    private static ParameterDefn[] ParameterDefinitions =
+    {
+        new ParameterDefn("MeshSculptedPrim", "Whether to create meshes for sculpties",
+            ConfigurationParameters.numericTrue,
+            (s,cf,p,v) => { ShouldMeshSculptedPrim = cf.GetBoolean(p, BSParam.BoolNumeric(v)); },
+            (s) => { return BSParam.NumericBool(ShouldMeshSculptedPrim); },
+            (s,p,l,v) => { ShouldMeshSculptedPrim = BSParam.BoolNumeric(v); } ),
+        new ParameterDefn("ForceSimplePrimMeshing", "If true, only use primitive meshes for objects",
+            ConfigurationParameters.numericFalse,
+            (s,cf,p,v) => { ShouldForceSimplePrimMeshing = cf.GetBoolean(p, BSParam.BoolNumeric(v)); },
+            (s) => { return BSParam.NumericBool(ShouldForceSimplePrimMeshing); },
+            (s,p,l,v) => { ShouldForceSimplePrimMeshing = BSParam.BoolNumeric(v); } ),
+        new ParameterDefn("UseHullsForPhysicalObjects", "If true, create hulls for physical objects",
+            ConfigurationParameters.numericTrue,
+            (s,cf,p,v) => { ShouldUseHullsForPhysicalObjects = cf.GetBoolean(p, BSParam.BoolNumeric(v)); },
+            (s) => { return BSParam.NumericBool(ShouldUseHullsForPhysicalObjects); },
+            (s,p,l,v) => { ShouldUseHullsForPhysicalObjects = BSParam.BoolNumeric(v); } ),
+
+        new ParameterDefn("MeshLevelOfDetail", "Level of detail to render meshes (32, 16, 8 or 4. 32=most detailed)",
+            8f,
+            (s,cf,p,v) => { MeshLOD = (float)cf.GetInt(p, (int)v); },
+            (s) => { return MeshLOD; },
+            (s,p,l,v) => { MeshLOD = v; } ),
+        new ParameterDefn("MeshLevelOfDetailMegaPrim", "Level of detail to render meshes larger than threshold meters",
+            16f,
+            (s,cf,p,v) => { MeshMegaPrimLOD = (float)cf.GetInt(p, (int)v); },
+            (s) => { return MeshMegaPrimLOD; },
+            (s,p,l,v) => { MeshMegaPrimLOD = v; } ),
+        new ParameterDefn("MeshLevelOfDetailMegaPrimThreshold", "Size (in meters) of a mesh before using MeshMegaPrimLOD",
+            10f,
+            (s,cf,p,v) => { MeshMegaPrimThreshold = (float)cf.GetInt(p, (int)v); },
+            (s) => { return MeshMegaPrimThreshold; },
+            (s,p,l,v) => { MeshMegaPrimThreshold = v; } ),
+        new ParameterDefn("SculptLevelOfDetail", "Level of detail to render sculpties (32, 16, 8 or 4. 32=most detailed)",
+            32f,
+            (s,cf,p,v) => { SculptLOD = (float)cf.GetInt(p, (int)v); },
+            (s) => { return SculptLOD; },
+            (s,p,l,v) => { SculptLOD = v; } ),
+
+        new ParameterDefn("MaxSubStep", "In simulation step, maximum number of substeps",
+            10f,
+            (s,cf,p,v) => { s.m_maxSubSteps = cf.GetInt(p, (int)v); },
+            (s) => { return (float)s.m_maxSubSteps; },
+            (s,p,l,v) => { s.m_maxSubSteps = (int)v; } ),
+        new ParameterDefn("FixedTimeStep", "In simulation step, seconds of one substep (1/60)",
+            1f / 60f,
+            (s,cf,p,v) => { s.m_fixedTimeStep = cf.GetFloat(p, v); },
+            (s) => { return (float)s.m_fixedTimeStep; },
+            (s,p,l,v) => { s.m_fixedTimeStep = v; } ),
+        new ParameterDefn("NominalFrameRate", "The base frame rate we claim",
+            55f,
+            (s,cf,p,v) => { s.NominalFrameRate = cf.GetInt(p, (int)v); },
+            (s) => { return (float)s.NominalFrameRate; },
+            (s,p,l,v) => { s.NominalFrameRate = (int)v; } ),
+        new ParameterDefn("MaxCollisionsPerFrame", "Max collisions returned at end of each frame",
+            2048f,
+            (s,cf,p,v) => { s.m_maxCollisionsPerFrame = cf.GetInt(p, (int)v); },
+            (s) => { return (float)s.m_maxCollisionsPerFrame; },
+            (s,p,l,v) => { s.m_maxCollisionsPerFrame = (int)v; } ),
+        new ParameterDefn("MaxUpdatesPerFrame", "Max updates returned at end of each frame",
+            8000f,
+            (s,cf,p,v) => { s.m_maxUpdatesPerFrame = cf.GetInt(p, (int)v); },
+            (s) => { return (float)s.m_maxUpdatesPerFrame; },
+            (s,p,l,v) => { s.m_maxUpdatesPerFrame = (int)v; } ),
+        new ParameterDefn("MaxTaintsToProcessPerStep", "Number of update taints to process before each simulation step",
+            500f,
+            (s,cf,p,v) => { s.m_taintsToProcessPerStep = cf.GetInt(p, (int)v); },
+            (s) => { return (float)s.m_taintsToProcessPerStep; },
+            (s,p,l,v) => { s.m_taintsToProcessPerStep = (int)v; } ),
+        new ParameterDefn("MinObjectMass", "Minimum object mass (0.0001)",
+            0.0001f,
+            (s,cf,p,v) => { MinimumObjectMass = cf.GetFloat(p, v); },
+            (s) => { return (float)MinimumObjectMass; },
+            (s,p,l,v) => { MinimumObjectMass = v; } ),
+        new ParameterDefn("MaxObjectMass", "Maximum object mass (10000.01)",
+            10000.01f,
+            (s,cf,p,v) => { MaximumObjectMass = cf.GetFloat(p, v); },
+            (s) => { return (float)MaximumObjectMass; },
+            (s,p,l,v) => { MaximumObjectMass = v; } ),
+
+        new ParameterDefn("PID_D", "Derivitive factor for motion smoothing",
+            2200f,
+            (s,cf,p,v) => { PID_D = cf.GetFloat(p, v); },
+            (s) => { return (float)PID_D; },
+            (s,p,l,v) => { PID_D = v; } ),
+        new ParameterDefn("PID_P", "Parameteric factor for motion smoothing",
+            900f,
+            (s,cf,p,v) => { PID_P = cf.GetFloat(p, v); },
+            (s) => { return (float)PID_P; },
+            (s,p,l,v) => { PID_P = v; } ),
+
+        new ParameterDefn("DefaultFriction", "Friction factor used on new objects",
+            0.2f,
+            (s,cf,p,v) => { s.UnmanagedParams[0].defaultFriction = cf.GetFloat(p, v); },
+            (s) => { return s.UnmanagedParams[0].defaultFriction; },
+            (s,p,l,v) => { s.UnmanagedParams[0].defaultFriction = v; } ),
+        new ParameterDefn("DefaultDensity", "Density for new objects" ,
+            10.000006836f,  // Aluminum g/cm3
+            (s,cf,p,v) => { s.UnmanagedParams[0].defaultDensity = cf.GetFloat(p, v); },
+            (s) => { return s.UnmanagedParams[0].defaultDensity; },
+            (s,p,l,v) => { s.UnmanagedParams[0].defaultDensity = v; } ),
+        new ParameterDefn("DefaultRestitution", "Bouncyness of an object" ,
+            0f,
+            (s,cf,p,v) => { s.UnmanagedParams[0].defaultRestitution = cf.GetFloat(p, v); },
+            (s) => { return s.UnmanagedParams[0].defaultRestitution; },
+            (s,p,l,v) => { s.UnmanagedParams[0].defaultRestitution = v; } ),
+        new ParameterDefn("CollisionMargin", "Margin around objects before collisions are calculated (must be zero!)",
+            0.04f,
+            (s,cf,p,v) => { s.UnmanagedParams[0].collisionMargin = cf.GetFloat(p, v); },
+            (s) => { return s.UnmanagedParams[0].collisionMargin; },
+            (s,p,l,v) => { s.UnmanagedParams[0].collisionMargin = v; } ),
+        new ParameterDefn("Gravity", "Vertical force of gravity (negative means down)",
+            -9.80665f,
+            (s,cf,p,v) => { s.UnmanagedParams[0].gravity = cf.GetFloat(p, v); },
+            (s) => { return s.UnmanagedParams[0].gravity; },
+            (s,p,l,v) => { s.UpdateParameterObject((x)=>{s.UnmanagedParams[0].gravity=x;}, p, PhysParameterEntry.APPLY_TO_NONE, v); },
+            (s,o,v) => { s.PE.SetGravity(o.PhysBody, new Vector3(0f,0f,v)); } ),
+
+
+        new ParameterDefn("LinearDamping", "Factor to damp linear movement per second (0.0 - 1.0)",
+            0f,
+            (s,cf,p,v) => { LinearDamping = cf.GetFloat(p, v); },
+            (s) => { return LinearDamping; },
+            (s,p,l,v) => { s.UpdateParameterObject((x)=>{LinearDamping=x;}, p, l, v); },
+            (s,o,v) => { s.PE.SetDamping(o.PhysBody, v, AngularDamping); } ),
+        new ParameterDefn("AngularDamping", "Factor to damp angular movement per second (0.0 - 1.0)",
+            0f,
+            (s,cf,p,v) => { AngularDamping = cf.GetFloat(p, v); },
+            (s) => { return AngularDamping; },
+            (s,p,l,v) => { s.UpdateParameterObject((x)=>{AngularDamping=x;}, p, l, v); },
+            (s,o,v) => { s.PE.SetDamping(o.PhysBody, LinearDamping, v); } ),
+        new ParameterDefn("DeactivationTime", "Seconds before considering an object potentially static",
+            0.2f,
+            (s,cf,p,v) => { DeactivationTime = cf.GetFloat(p, v); },
+            (s) => { return DeactivationTime; },
+            (s,p,l,v) => { s.UpdateParameterObject((x)=>{DeactivationTime=x;}, p, l, v); },
+            (s,o,v) => { s.PE.SetDeactivationTime(o.PhysBody, v); } ),
+        new ParameterDefn("LinearSleepingThreshold", "Seconds to measure linear movement before considering static",
+            0.8f,
+            (s,cf,p,v) => { LinearSleepingThreshold = cf.GetFloat(p, v); },
+            (s) => { return LinearSleepingThreshold; },
+            (s,p,l,v) => { s.UpdateParameterObject((x)=>{LinearSleepingThreshold=x;}, p, l, v); },
+            (s,o,v) => { s.PE.SetSleepingThresholds(o.PhysBody, v, v); } ),
+        new ParameterDefn("AngularSleepingThreshold", "Seconds to measure angular movement before considering static",
+            1.0f,
+            (s,cf,p,v) => { AngularSleepingThreshold = cf.GetFloat(p, v); },
+            (s) => { return AngularSleepingThreshold; },
+            (s,p,l,v) => { s.UpdateParameterObject((x)=>{AngularSleepingThreshold=x;}, p, l, v); },
+            (s,o,v) => { s.PE.SetSleepingThresholds(o.PhysBody, v, v); } ),
+        new ParameterDefn("CcdMotionThreshold", "Continuious collision detection threshold (0 means no CCD)" ,
+            0f,     // set to zero to disable
+            (s,cf,p,v) => { CcdMotionThreshold = cf.GetFloat(p, v); },
+            (s) => { return CcdMotionThreshold; },
+            (s,p,l,v) => { s.UpdateParameterObject((x)=>{CcdMotionThreshold=x;}, p, l, v); },
+            (s,o,v) => { s.PE.SetCcdMotionThreshold(o.PhysBody, v); } ),
+        new ParameterDefn("CcdSweptSphereRadius", "Continuious collision detection test radius" ,
+            0f,
+            (s,cf,p,v) => { CcdSweptSphereRadius = cf.GetFloat(p, v); },
+            (s) => { return CcdSweptSphereRadius; },
+            (s,p,l,v) => { s.UpdateParameterObject((x)=>{CcdSweptSphereRadius=x;}, p, l, v); },
+            (s,o,v) => { s.PE.SetCcdSweptSphereRadius(o.PhysBody, v); } ),
+        new ParameterDefn("ContactProcessingThreshold", "Distance between contacts before doing collision check" ,
+            0.1f,
+            (s,cf,p,v) => { ContactProcessingThreshold = cf.GetFloat(p, v); },
+            (s) => { return ContactProcessingThreshold; },
+            (s,p,l,v) => { s.UpdateParameterObject((x)=>{ContactProcessingThreshold=x;}, p, l, v); },
+            (s,o,v) => { s.PE.SetContactProcessingThreshold(o.PhysBody, v); } ),
+
+            new ParameterDefn("TerrainImplementation", "Type of shape to use for terrain (0=heightmap, 1=mesh)",
+            (float)BSTerrainPhys.TerrainImplementation.Mesh,
+            (s,cf,p,v) => { TerrainImplementation = cf.GetFloat(p,v); },
+            (s) => { return TerrainImplementation; },
+            (s,p,l,v) => { TerrainImplementation = v; } ),
+        new ParameterDefn("TerrainFriction", "Factor to reduce movement against terrain surface" ,
+            0.3f,
+            (s,cf,p,v) => { TerrainFriction = cf.GetFloat(p, v); },
+            (s) => { return TerrainFriction; },
+            (s,p,l,v) => { TerrainFriction = v;  /* TODO: set on real terrain */} ),
+        new ParameterDefn("TerrainHitFraction", "Distance to measure hit collisions" ,
+            0.8f,
+            (s,cf,p,v) => { TerrainHitFraction = cf.GetFloat(p, v); },
+            (s) => { return TerrainHitFraction; },
+            (s,p,l,v) => { TerrainHitFraction = v; /* TODO: set on real terrain */ } ),
+        new ParameterDefn("TerrainRestitution", "Bouncyness" ,
+            0f,
+            (s,cf,p,v) => { TerrainRestitution = cf.GetFloat(p, v); },
+            (s) => { return TerrainRestitution; },
+            (s,p,l,v) => { TerrainRestitution = v;  /* TODO: set on real terrain */ } ),
+        new ParameterDefn("TerrainCollisionMargin", "Margin where collision checking starts" ,
+            0.04f,
+            (s,cf,p,v) => { TerrainCollisionMargin = cf.GetFloat(p, v); },
+            (s) => { return TerrainCollisionMargin; },
+            (s,p,l,v) => { TerrainCollisionMargin = v;  /* TODO: set on real terrain */ } ),
+
+        new ParameterDefn("AvatarFriction", "Factor to reduce movement against an avatar. Changed on avatar recreation.",
+            0.2f,
+            (s,cf,p,v) => { AvatarFriction = cf.GetFloat(p, v); },
+            (s) => { return AvatarFriction; },
+            (s,p,l,v) => { s.UpdateParameterObject((x)=>{AvatarFriction=x;}, p, l, v); } ),
+        new ParameterDefn("AvatarStandingFriction", "Avatar friction when standing. Changed on avatar recreation.",
+            10.0f,
+            (s,cf,p,v) => { AvatarStandingFriction = cf.GetFloat(p, v); },
+            (s) => { return AvatarStandingFriction; },
+            (s,p,l,v) => { AvatarStandingFriction = v; } ),
+        new ParameterDefn("AvatarAlwaysRunFactor", "Speed multiplier if avatar is set to always run",
+            1.3f,
+            (s,cf,p,v) => { AvatarAlwaysRunFactor = cf.GetFloat(p, v); },
+            (s) => { return AvatarAlwaysRunFactor; },
+            (s,p,l,v) => { AvatarAlwaysRunFactor = v; } ),
+        new ParameterDefn("AvatarDensity", "Density of an avatar. Changed on avatar recreation.",
+            3.5f,
+            (s,cf,p,v) => { AvatarDensity = cf.GetFloat(p, v); },
+            (s) => { return AvatarDensity; },
+            (s,p,l,v) => { s.UpdateParameterObject((x)=>{AvatarDensity=x;}, p, l, v); } ),
+        new ParameterDefn("AvatarRestitution", "Bouncyness. Changed on avatar recreation.",
+            0f,
+            (s,cf,p,v) => { AvatarRestitution = cf.GetFloat(p, v); },
+            (s) => { return AvatarRestitution; },
+            (s,p,l,v) => { s.UpdateParameterObject((x)=>{AvatarRestitution=x;}, p, l, v); } ),
+        new ParameterDefn("AvatarCapsuleWidth", "The distance between the sides of the avatar capsule",
+            0.6f,
+            (s,cf,p,v) => { AvatarCapsuleWidth = cf.GetFloat(p, v); },
+            (s) => { return AvatarCapsuleWidth; },
+            (s,p,l,v) => { s.UpdateParameterObject((x)=>{AvatarCapsuleWidth=x;}, p, l, v); } ),
+        new ParameterDefn("AvatarCapsuleDepth", "The distance between the front and back of the avatar capsule",
+            0.45f,
+            (s,cf,p,v) => { AvatarCapsuleDepth = cf.GetFloat(p, v); },
+            (s) => { return AvatarCapsuleDepth; },
+            (s,p,l,v) => { s.UpdateParameterObject((x)=>{AvatarCapsuleDepth=x;}, p, l, v); } ),
+        new ParameterDefn("AvatarCapsuleHeight", "Default height of space around avatar",
+            1.5f,
+            (s,cf,p,v) => { AvatarCapsuleHeight = cf.GetFloat(p, v); },
+            (s) => { return AvatarCapsuleHeight; },
+            (s,p,l,v) => { s.UpdateParameterObject((x)=>{AvatarCapsuleHeight=x;}, p, l, v); } ),
+            new ParameterDefn("AvatarContactProcessingThreshold", "Distance from capsule to check for collisions",
+            0.1f,
+            (s,cf,p,v) => { AvatarContactProcessingThreshold = cf.GetFloat(p, v); },
+            (s) => { return AvatarContactProcessingThreshold; },
+            (s,p,l,v) => { s.UpdateParameterObject((x)=>{AvatarContactProcessingThreshold=x;}, p, l, v); } ),
+            new ParameterDefn("AvatarStepHeight", "Height of a step obstacle to consider step correction",
+            0.3f,
+            (s,cf,p,v) => { AvatarStepHeight = cf.GetFloat(p, v); },
+            (s) => { return AvatarStepHeight; },
+            (s,p,l,v) => { AvatarStepHeight = v; } ),
+            new ParameterDefn("AvatarStepApproachFactor", "Factor to control angle of approach to step (0=straight on)",
+            0.6f,
+            (s,cf,p,v) => { AvatarStepApproachFactor = cf.GetFloat(p, v); },
+            (s) => { return AvatarStepApproachFactor; },
+            (s,p,l,v) => { AvatarStepApproachFactor = v; } ),
+            new ParameterDefn("AvatarStepForceFactor", "Controls the amount of force up applied to step up onto a step",
+            2.0f,
+            (s,cf,p,v) => { AvatarStepForceFactor = cf.GetFloat(p, v); },
+            (s) => { return AvatarStepForceFactor; },
+            (s,p,l,v) => { AvatarStepForceFactor = v; } ),
+
+        new ParameterDefn("VehicleAngularDamping", "Factor to damp vehicle angular movement per second (0.0 - 1.0)",
+            0.95f,
+            (s,cf,p,v) => { VehicleAngularDamping = cf.GetFloat(p, v); },
+            (s) => { return VehicleAngularDamping; },
+            (s,p,l,v) => { VehicleAngularDamping = v; } ),
+
+            new ParameterDefn("MaxPersistantManifoldPoolSize", "Number of manifolds pooled (0 means default of 4096)",
+            0f,
+            (s,cf,p,v) => { s.UnmanagedParams[0].maxPersistantManifoldPoolSize = cf.GetFloat(p, v); },
+            (s) => { return s.UnmanagedParams[0].maxPersistantManifoldPoolSize; },
+            (s,p,l,v) => { s.UnmanagedParams[0].maxPersistantManifoldPoolSize = v; } ),
+            new ParameterDefn("MaxCollisionAlgorithmPoolSize", "Number of collisions pooled (0 means default of 4096)",
+            0f,
+            (s,cf,p,v) => { s.UnmanagedParams[0].maxCollisionAlgorithmPoolSize = cf.GetFloat(p, v); },
+            (s) => { return s.UnmanagedParams[0].maxCollisionAlgorithmPoolSize; },
+            (s,p,l,v) => { s.UnmanagedParams[0].maxCollisionAlgorithmPoolSize = v; } ),
+            new ParameterDefn("ShouldDisableContactPoolDynamicAllocation", "Enable to allow large changes in object count",
+            ConfigurationParameters.numericFalse,
+            (s,cf,p,v) => { s.UnmanagedParams[0].shouldDisableContactPoolDynamicAllocation = BSParam.NumericBool(cf.GetBoolean(p, BSParam.BoolNumeric(v))); },
+            (s) => { return s.UnmanagedParams[0].shouldDisableContactPoolDynamicAllocation; },
+            (s,p,l,v) => { s.UnmanagedParams[0].shouldDisableContactPoolDynamicAllocation = v; } ),
+            new ParameterDefn("ShouldForceUpdateAllAabbs", "Enable to recomputer AABBs every simulator step",
+            ConfigurationParameters.numericFalse,
+            (s,cf,p,v) => { s.UnmanagedParams[0].shouldForceUpdateAllAabbs = BSParam.NumericBool(cf.GetBoolean(p, BSParam.BoolNumeric(v))); },
+            (s) => { return s.UnmanagedParams[0].shouldForceUpdateAllAabbs; },
+            (s,p,l,v) => { s.UnmanagedParams[0].shouldForceUpdateAllAabbs = v; } ),
+            new ParameterDefn("ShouldRandomizeSolverOrder", "Enable for slightly better stacking interaction",
+            ConfigurationParameters.numericTrue,
+            (s,cf,p,v) => { s.UnmanagedParams[0].shouldRandomizeSolverOrder = BSParam.NumericBool(cf.GetBoolean(p, BSParam.BoolNumeric(v))); },
+            (s) => { return s.UnmanagedParams[0].shouldRandomizeSolverOrder; },
+            (s,p,l,v) => { s.UnmanagedParams[0].shouldRandomizeSolverOrder = v; } ),
+            new ParameterDefn("ShouldSplitSimulationIslands", "Enable splitting active object scanning islands",
+            ConfigurationParameters.numericTrue,
+            (s,cf,p,v) => { s.UnmanagedParams[0].shouldSplitSimulationIslands = BSParam.NumericBool(cf.GetBoolean(p, BSParam.BoolNumeric(v))); },
+            (s) => { return s.UnmanagedParams[0].shouldSplitSimulationIslands; },
+            (s,p,l,v) => { s.UnmanagedParams[0].shouldSplitSimulationIslands = v; } ),
+            new ParameterDefn("ShouldEnableFrictionCaching", "Enable friction computation caching",
+            ConfigurationParameters.numericFalse,
+            (s,cf,p,v) => { s.UnmanagedParams[0].shouldEnableFrictionCaching = BSParam.NumericBool(cf.GetBoolean(p, BSParam.BoolNumeric(v))); },
+            (s) => { return s.UnmanagedParams[0].shouldEnableFrictionCaching; },
+            (s,p,l,v) => { s.UnmanagedParams[0].shouldEnableFrictionCaching = v; } ),
+            new ParameterDefn("NumberOfSolverIterations", "Number of internal iterations (0 means default)",
+            0f,     // zero says use Bullet default
+            (s,cf,p,v) => { s.UnmanagedParams[0].numberOfSolverIterations = cf.GetFloat(p, v); },
+            (s) => { return s.UnmanagedParams[0].numberOfSolverIterations; },
+            (s,p,l,v) => { s.UnmanagedParams[0].numberOfSolverIterations = v; } ),
+
+            new ParameterDefn("LinksetImplementation", "Type of linkset implementation (0=Constraint, 1=Compound, 2=Manual)",
+            (float)BSLinkset.LinksetImplementation.Compound,
+            (s,cf,p,v) => { LinksetImplementation = cf.GetFloat(p,v); },
+            (s) => { return LinksetImplementation; },
+            (s,p,l,v) => { LinksetImplementation = v; } ),
+            new ParameterDefn("LinkConstraintUseFrameOffset", "For linksets built with constraints, enable frame offsetFor linksets built with constraints, enable frame offset.",
+            ConfigurationParameters.numericFalse,
+            (s,cf,p,v) => { LinkConstraintUseFrameOffset = BSParam.NumericBool(cf.GetBoolean(p, BSParam.BoolNumeric(v))); },
+            (s) => { return LinkConstraintUseFrameOffset; },
+            (s,p,l,v) => { LinkConstraintUseFrameOffset = v; } ),
+            new ParameterDefn("LinkConstraintEnableTransMotor", "Whether to enable translational motor on linkset constraints",
+            ConfigurationParameters.numericTrue,
+            (s,cf,p,v) => { LinkConstraintEnableTransMotor = BSParam.NumericBool(cf.GetBoolean(p, BSParam.BoolNumeric(v))); },
+            (s) => { return LinkConstraintEnableTransMotor; },
+            (s,p,l,v) => { LinkConstraintEnableTransMotor = v; } ),
+            new ParameterDefn("LinkConstraintTransMotorMaxVel", "Maximum velocity to be applied by translational motor in linkset constraints",
+            5.0f,
+            (s,cf,p,v) => { LinkConstraintTransMotorMaxVel = cf.GetFloat(p, v); },
+            (s) => { return LinkConstraintTransMotorMaxVel; },
+            (s,p,l,v) => { LinkConstraintTransMotorMaxVel = v; } ),
+            new ParameterDefn("LinkConstraintTransMotorMaxForce", "Maximum force to be applied by translational motor in linkset constraints",
+            0.1f,
+            (s,cf,p,v) => { LinkConstraintTransMotorMaxForce = cf.GetFloat(p, v); },
+            (s) => { return LinkConstraintTransMotorMaxForce; },
+            (s,p,l,v) => { LinkConstraintTransMotorMaxForce = v; } ),
+            new ParameterDefn("LinkConstraintCFM", "Amount constraint can be violated. 0=no violation, 1=infinite. Default=0.1",
+            0.1f,
+            (s,cf,p,v) => { LinkConstraintCFM = cf.GetFloat(p, v); },
+            (s) => { return LinkConstraintCFM; },
+            (s,p,l,v) => { LinkConstraintCFM = v; } ),
+            new ParameterDefn("LinkConstraintERP", "Amount constraint is corrected each tick. 0=none, 1=all. Default = 0.2",
+            0.1f,
+            (s,cf,p,v) => { LinkConstraintERP = cf.GetFloat(p, v); },
+            (s) => { return LinkConstraintERP; },
+            (s,p,l,v) => { LinkConstraintERP = v; } ),
+            new ParameterDefn("LinkConstraintSolverIterations", "Number of solver iterations when computing constraint. (0 = Bullet default)",
+            40,
+            (s,cf,p,v) => { LinkConstraintSolverIterations = cf.GetFloat(p, v); },
+            (s) => { return LinkConstraintSolverIterations; },
+            (s,p,l,v) => { LinkConstraintSolverIterations = v; } ),
+
+        new ParameterDefn("PhysicsMetricFrames", "Frames between outputting detailed phys metrics. (0 is off)",
+            0f,
+            (s,cf,p,v) => { s.PhysicsMetricDumpFrames = cf.GetFloat(p, (int)v); },
+            (s) => { return (float)s.PhysicsMetricDumpFrames; },
+            (s,p,l,v) => { s.PhysicsMetricDumpFrames = (int)v; } ),
+        new ParameterDefn("ResetBroadphasePool", "Setting this is any value resets the broadphase collision pool",
+            0f,
+            (s,cf,p,v) => { ; },
+            (s) => { return 0f; },
+            (s,p,l,v) => { BSParam.ResetBroadphasePoolTainted(s, v); } ),
+        new ParameterDefn("ResetConstraintSolver", "Setting this is any value resets the constraint solver",
+            0f,
+            (s,cf,p,v) => { ; },
+            (s) => { return 0f; },
+            (s,p,l,v) => { BSParam.ResetConstraintSolverTainted(s, v); } ),
+    };
+
+    // Convert a boolean to our numeric true and false values
+    public static float NumericBool(bool b)
+    {
+        return (b ? ConfigurationParameters.numericTrue : ConfigurationParameters.numericFalse);
+    }
+
+    // Convert numeric true and false values to a boolean
+    public static bool BoolNumeric(float b)
+    {
+        return (b == ConfigurationParameters.numericTrue ? true : false);
+    }
+
+    private static void ResetBroadphasePoolTainted(BSScene pPhysScene, float v)
+    {
+        BSScene physScene = pPhysScene;
+        physScene.TaintedObject("BSParam.ResetBroadphasePoolTainted", delegate()
+        {
+            physScene.PE.ResetBroadphasePool(physScene.World);
+        });
+    }
+
+    private static void ResetConstraintSolverTainted(BSScene pPhysScene, float v)
+    {
+        BSScene physScene = pPhysScene;
+        physScene.TaintedObject("BSParam.ResetConstraintSolver", delegate()
+        {
+            physScene.PE.ResetConstraintSolver(physScene.World);
+        });
+    }
+
+    // Search through the parameter definitions and return the matching
+    //    ParameterDefn structure.
+    // Case does not matter as names are compared after converting to lower case.
+    // Returns 'false' if the parameter is not found.
+    internal static bool TryGetParameter(string paramName, out ParameterDefn defn)
+    {
+        bool ret = false;
+        ParameterDefn foundDefn = new ParameterDefn();
+        string pName = paramName.ToLower();
+
+        foreach (ParameterDefn parm in ParameterDefinitions)
+        {
+            if (pName == parm.name.ToLower())
+            {
+                foundDefn = parm;
+                ret = true;
+                break;
+            }
+        }
+        defn = foundDefn;
+        return ret;
+    }
+
+    // Pass through the settable parameters and set the default values
+    internal static void SetParameterDefaultValues(BSScene physicsScene)
+    {
+        foreach (ParameterDefn parm in ParameterDefinitions)
+        {
+            parm.setter(physicsScene, parm.name, PhysParameterEntry.APPLY_TO_NONE, parm.defaultValue);
+        }
+    }
+
+    // Get user set values out of the ini file.
+    internal static void SetParameterConfigurationValues(BSScene physicsScene, IConfig cfg)
+    {
+        foreach (ParameterDefn parm in ParameterDefinitions)
+        {
+            parm.userParam(physicsScene, cfg, parm.name, parm.defaultValue);
+        }
+    }
+
+    internal static PhysParameterEntry[] SettableParameters = new PhysParameterEntry[1];
+
+    // This creates an array in the correct format for returning the list of
+    //    parameters. This is used by the 'list' option of the 'physics' command.
+    internal static void BuildParameterTable()
+    {
+        if (SettableParameters.Length < ParameterDefinitions.Length)
+        {
+            List<PhysParameterEntry> entries = new List<PhysParameterEntry>();
+            for (int ii = 0; ii < ParameterDefinitions.Length; ii++)
+            {
+                ParameterDefn pd = ParameterDefinitions[ii];
+                entries.Add(new PhysParameterEntry(pd.name, pd.desc));
+            }
+
+            // make the list in alphabetical order for estetic reasons
+            entries.Sort(delegate(PhysParameterEntry ppe1, PhysParameterEntry ppe2)
+            {
+                return ppe1.name.CompareTo(ppe2.name);
+            });
+
+            SettableParameters = entries.ToArray();
+        }
+    }
+
+
+}
+}
diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSPhysObject.cs b/OpenSim/Region/Physics/BulletSPlugin/BSPhysObject.cs
index f6a890e..e8575f6 100755
--- a/OpenSim/Region/Physics/BulletSPlugin/BSPhysObject.cs
+++ b/OpenSim/Region/Physics/BulletSPlugin/BSPhysObject.cs
@@ -45,6 +45,16 @@ namespace OpenSim.Region.Physics.BulletSPlugin
  *      ForceVariableName: direct reference (store and fetch) to the value in the physics engine.
  *  The last two (and certainly the last one) should be referenced only in taint-time.
  */
+
+/*
+ * As of 20121221, the following are the call sequences (going down) for different script physical functions:
+ * llApplyImpulse       llApplyRotImpulse           llSetTorque             llSetForce
+ * SOP.ApplyImpulse     SOP.ApplyAngularImpulse     SOP.SetAngularImpulse   SOP.SetForce
+ * SOG.ApplyImpulse     SOG.ApplyAngularImpulse     SOG.SetAngularImpulse
+ * PA.AddForce          PA.AddAngularForce          PA.Torque = v           PA.Force = v
+ * BS.ApplyCentralForce BS.ApplyTorque              
+ */
+
 public abstract class BSPhysObject : PhysicsActor
 {
     protected BSPhysObject()
@@ -57,26 +67,43 @@ public abstract class BSPhysObject : PhysicsActor
         PhysObjectName = name;
         TypeName = typeName;
 
+        // We don't have any physical representation yet.
+        PhysBody = new BulletBody(localID);
+        PhysShape = new BulletShape();
+
+        // A linkset of just me
         Linkset = BSLinkset.Factory(PhysicsScene, this);
         LastAssetBuildFailed = false;
 
+        // Default material type
+        Material = MaterialAttributes.Material.Wood;
+
         CollisionCollection = new CollisionEventUpdate();
+        CollisionsLastTick = CollisionCollection;
         SubscribedEventsMs = 0;
         CollidingStep = 0;
         CollidingGroundStep = 0;
     }
 
+    // Tell the object to clean up.
+    public virtual void Destroy()
+    {
+        UnRegisterAllPreStepActions();
+    }
+
     public BSScene PhysicsScene { get; protected set; }
     // public override uint LocalID { get; set; } // Use the LocalID definition in PhysicsActor
     public string PhysObjectName { get; protected set; }
     public string TypeName { get; protected set; }
 
     public BSLinkset Linkset { get; set; }
+    public BSLinksetInfo LinksetInfo { get; set; }
 
     // Return the object mass without calculating it or having side effects
     public abstract float RawMass { get; }
     // Set the raw mass but also update physical mass properties (inertia, ...)
-    public abstract void UpdatePhysicalMassProperties(float mass);
+    // 'inWorld' true if the object has already been added to the dynamic world.
+    public abstract void UpdatePhysicalMassProperties(float mass, bool inWorld);
 
     // The last value calculated for the prim's inertia
     public OMV.Vector3 Inertia { get; set; }
@@ -105,10 +132,17 @@ public abstract class BSPhysObject : PhysicsActor
     public EntityProperties CurrentEntityProperties { get; set; }
     public EntityProperties LastEntityProperties { get; set; }
 
-    public abstract OMV.Vector3 Scale { get; set; }
+    public virtual OMV.Vector3 Scale { get; set; }
     public abstract bool IsSolid { get; }
     public abstract bool IsStatic { get; }
 
+    // Materialness
+    public MaterialAttributes.Material Material { get; private set; }
+    public override void SetMaterial(int material)
+    {
+        Material = (MaterialAttributes.Material)material;
+    }
+
     // Stop all physical motion.
     public abstract void ZeroMotion(bool inTaintTime);
     public abstract void ZeroAngularMotion(bool inTaintTime);
@@ -119,15 +153,33 @@ public abstract class BSPhysObject : PhysicsActor
     // Update the physical location and motion of the object. Called with data from Bullet.
     public abstract void UpdateProperties(EntityProperties entprop);
 
-    // Tell the object to clean up.
-    public abstract void Destroy();
-
     public abstract OMV.Vector3 RawPosition { get; set; }
     public abstract OMV.Vector3 ForcePosition { get; set; }
 
     public abstract OMV.Quaternion RawOrientation { get; set; }
     public abstract OMV.Quaternion ForceOrientation { get; set; }
 
+    // The system is telling us the velocity it wants to move at.
+    // Velocity in world coordinates.
+    // protected OMV.Vector3 m_targetVelocity;  // use the definition in PhysicsActor
+    public override OMV.Vector3 TargetVelocity
+    {
+        get { return m_targetVelocity; }
+        set
+        {
+            m_targetVelocity = value;
+            Velocity = value;
+        }
+    }
+    public virtual float TargetSpeed
+    {
+        get
+        {
+            OMV.Vector3 characterOrientedVelocity = TargetVelocity * OMV.Quaternion.Inverse(OMV.Quaternion.Normalize(RawOrientation));
+            return characterOrientedVelocity.X;
+        }
+    }
+    public abstract OMV.Vector3 RawVelocity { get; set; }
     public abstract OMV.Vector3 ForceVelocity { get; set; }
 
     public abstract OMV.Vector3 ForceRotationalVelocity { get; set; }
@@ -136,6 +188,15 @@ public abstract class BSPhysObject : PhysicsActor
 
     public virtual bool ForceBodyShapeRebuild(bool inTaintTime) { return false; }
 
+    public virtual float ForwardSpeed
+    {
+        get
+        {
+            OMV.Vector3 characterOrientedVelocity = RawVelocity * OMV.Quaternion.Inverse(OMV.Quaternion.Normalize(RawOrientation));
+            return characterOrientedVelocity.X;
+        }
+    }
+
     #region Collisions
 
     // Requested number of milliseconds between collision events. Zero means disabled.
@@ -146,26 +207,65 @@ public abstract class BSPhysObject : PhysicsActor
     protected long CollidingStep { get; set; }
     // The simulation step that last had a collision with the ground
     protected long CollidingGroundStep { get; set; }
+    // The simulation step that last collided with an object
+    protected long CollidingObjectStep { get; set; }
     // The collision flags we think are set in Bullet
     protected CollisionFlags CurrentCollisionFlags { get; set; }
 
+    public override bool IsColliding {
+        get { return (CollidingStep == PhysicsScene.SimulationStep); }
+        set {
+            if (value)
+                CollidingStep = PhysicsScene.SimulationStep;
+            else
+                CollidingStep = 0;
+            }
+    }
+    public override bool CollidingGround {
+        get { return (CollidingGroundStep == PhysicsScene.SimulationStep); }
+        set
+        {
+            if (value)
+                CollidingGroundStep = PhysicsScene.SimulationStep;
+            else
+                CollidingGroundStep = 0;
+        }
+    }
+    public override bool CollidingObj {
+        get { return (CollidingObjectStep == PhysicsScene.SimulationStep); }
+        set { 
+            if (value)
+                CollidingObjectStep = PhysicsScene.SimulationStep;
+            else
+                CollidingObjectStep = 0;
+        }
+    }
+
     // The collisions that have been collected this tick
     protected CollisionEventUpdate CollisionCollection;
+    // Remember collisions from last tick for fancy collision based actions
+    //     (like a BSCharacter walking up stairs).
+    protected CollisionEventUpdate CollisionsLastTick;
 
     // The simulation step is telling this object about a collision.
     // Return 'true' if a collision was processed and should be sent up.
+    // Return 'false' if this object is not enabled/subscribed/appropriate for or has already seen this collision.
     // Called at taint time from within the Step() function
     public virtual bool Collide(uint collidingWith, BSPhysObject collidee,
                     OMV.Vector3 contactPoint, OMV.Vector3 contactNormal, float pentrationDepth)
     {
         bool ret = false;
 
-        // The following lines make IsColliding() and IsCollidingGround() work
+        // The following lines make IsColliding(), CollidingGround() and CollidingObj work
         CollidingStep = PhysicsScene.SimulationStep;
         if (collidingWith <= PhysicsScene.TerrainManager.HighestTerrainID)
         {
             CollidingGroundStep = PhysicsScene.SimulationStep;
         }
+        else
+        {
+            CollidingObjectStep = PhysicsScene.SimulationStep;
+        }
 
         // prims in the same linkset cannot collide with each other
         if (collidee != null && (this.Linkset.LinksetID == collidee.Linkset.LinksetID))
@@ -192,7 +292,7 @@ public abstract class BSPhysObject : PhysicsActor
     {
         bool ret = true;
         // If the 'no collision' call, force it to happen right now so quick collision_end
-        bool force = CollisionCollection.Count == 0;
+        bool force = (CollisionCollection.Count == 0);
 
         // throttle the collisions to the number of milliseconds specified in the subscription
         if (force || (PhysicsScene.SimulationNowTime >= NextCollisionOkTime))
@@ -210,8 +310,13 @@ public abstract class BSPhysObject : PhysicsActor
             // DetailLog("{0},{1}.SendCollisionUpdate,call,numCollisions={2}", LocalID, TypeName, CollisionCollection.Count);
             base.SendCollisionUpdate(CollisionCollection);
 
-            // The collisionCollection structure is passed around in the simulator.
+            // Remember the collisions from this tick for some collision specific processing.
+            CollisionsLastTick = CollisionCollection;
+
+            // The CollisionCollection instance is passed around in the simulator.
             // Make sure we don't have a handle to that one and that a new one is used for next time.
+            //    This fixes an interesting 'gotcha'. If we call CollisionCollection.Clear() here, 
+            //    a race condition is created for the other users of this instance.
             CollisionCollection = new CollisionEventUpdate();
         }
         return ret;
@@ -229,7 +334,8 @@ public abstract class BSPhysObject : PhysicsActor
 
             PhysicsScene.TaintedObject(TypeName+".SubscribeEvents", delegate()
             {
-                CurrentCollisionFlags = BulletSimAPI.AddToCollisionFlags2(PhysBody.ptr, CollisionFlags.BS_SUBSCRIBE_COLLISION_EVENTS);
+                if (PhysBody.HasPhysicalBody)
+                    CurrentCollisionFlags = PhysicsScene.PE.AddToCollisionFlags(PhysBody, CollisionFlags.BS_SUBSCRIBE_COLLISION_EVENTS);
             });
         }
         else
@@ -243,7 +349,9 @@ public abstract class BSPhysObject : PhysicsActor
         SubscribedEventsMs = 0;
         PhysicsScene.TaintedObject(TypeName+".UnSubscribeEvents", delegate()
         {
-            CurrentCollisionFlags = BulletSimAPI.RemoveFromCollisionFlags2(PhysBody.ptr, CollisionFlags.BS_SUBSCRIBE_COLLISION_EVENTS);
+            // Make sure there is a body there because sometimes destruction happens in an un-ideal order.
+            if (PhysBody.HasPhysicalBody)
+                CurrentCollisionFlags = PhysicsScene.PE.RemoveFromCollisionFlags(PhysBody, CollisionFlags.BS_SUBSCRIBE_COLLISION_EVENTS);
         });
     }
     // Return 'true' if the simulator wants collision events
@@ -253,11 +361,57 @@ public abstract class BSPhysObject : PhysicsActor
 
     #endregion // Collisions
 
+    #region Per Simulation Step actions
+    // There are some actions that must be performed for a physical object before each simulation step.
+    // These actions are optional so, rather than scanning all the physical objects and asking them
+    //     if they have anything to do, a physical object registers for an event call before the step is performed.
+    // This bookkeeping makes it easy to add, remove and clean up after all these registrations.
+    private Dictionary<string, BSScene.PreStepAction> RegisteredActions = new Dictionary<string, BSScene.PreStepAction>();
+    protected void RegisterPreStepAction(string op, uint id, BSScene.PreStepAction actn)
+    {
+        string identifier = op + "-" + id.ToString();
+
+        // Clean out any existing action
+        UnRegisterPreStepAction(op, id);
+
+        RegisteredActions[identifier] = actn;
+        PhysicsScene.BeforeStep += actn;
+        DetailLog("{0},BSPhysObject.RegisterPreStepAction,id={1}", LocalID, identifier);
+    }
+
+    // Unregister a pre step action. Safe to call if the action has not been registered.
+    protected void UnRegisterPreStepAction(string op, uint id)
+    {
+        string identifier = op + "-" + id.ToString();
+        bool removed = false;
+        if (RegisteredActions.ContainsKey(identifier))
+        {
+            PhysicsScene.BeforeStep -= RegisteredActions[identifier];
+            RegisteredActions.Remove(identifier);
+            removed = true;
+        }
+        DetailLog("{0},BSPhysObject.UnRegisterPreStepAction,id={1},removed={2}", LocalID, identifier, removed);
+    }
+
+    protected void UnRegisterAllPreStepActions()
+    {
+        foreach (KeyValuePair<string, BSScene.PreStepAction> kvp in RegisteredActions)
+        {
+            PhysicsScene.BeforeStep -= kvp.Value;
+        }
+        RegisteredActions.Clear();
+        DetailLog("{0},BSPhysObject.UnRegisterAllPreStepActions,", LocalID);
+    }
+
+    
+    #endregion // Per Simulation Step actions
+
     // High performance detailed logging routine used by the physical objects.
     protected void DetailLog(string msg, params Object[] args)
     {
         if (PhysicsScene.PhysicsLogging.Enabled)
             PhysicsScene.DetailLog(msg, args);
     }
+
 }
 }
diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSPlugin.cs b/OpenSim/Region/Physics/BulletSPlugin/BSPlugin.cs
index 20f5180..65be52a 100644
--- a/OpenSim/Region/Physics/BulletSPlugin/BSPlugin.cs
+++ b/OpenSim/Region/Physics/BulletSPlugin/BSPlugin.cs
@@ -59,12 +59,6 @@ public class BSPlugin : IPhysicsPlugin
     {
         if (_mScene == null)
         {
-            if (Util.IsWindows())
-                Util.LoadArchSpecificWindowsDll("BulletSim.dll");
-            // If not Windows, loading is performed by the
-            // Mono loader as specified in
-            // "bin/Physics/OpenSim.Region.Physics.BulletSPlugin.dll.config".
-
             _mScene = new BSScene(sceneIdentifier);
         }
         return (_mScene);
diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSPrim.cs b/OpenSim/Region/Physics/BulletSPlugin/BSPrim.cs
index 2b3fa25..8fd054f 100644
--- a/OpenSim/Region/Physics/BulletSPlugin/BSPrim.cs
+++ b/OpenSim/Region/Physics/BulletSPlugin/BSPrim.cs
@@ -45,7 +45,6 @@ public sealed class BSPrim : BSPhysObject
     private static readonly string LogHeader = "[BULLETS PRIM]";
 
     // _size is what the user passed. Scale is what we pass to the physics engine with the mesh.
-    // Often Scale is unity because the meshmerizer will apply _size when creating the mesh.
     private OMV.Vector3 _size;  // the multiplier for each mesh dimension as passed by the user
 
     private bool _grabbed;
@@ -67,9 +66,6 @@ public sealed class BSPrim : BSPhysObject
     private float _restitution;
     private bool _setAlwaysRun;
     private bool _throttleUpdates;
-    private bool _isColliding;
-    private bool _collidingGround;
-    private bool _collidingObj;
     private bool _floatOnWater;
     private OMV.Vector3 _rotationalVelocity;
     private bool _kinematic;
@@ -77,13 +73,14 @@ public sealed class BSPrim : BSPhysObject
 
     private BSDynamics _vehicle;
 
+    private BSVMotor _targetMotor;
     private OMV.Vector3 _PIDTarget;
-    private bool _usePID;
     private float _PIDTau;
-    private bool _useHoverPID;
+
+    private BSFMotor _hoverMotor;
     private float _PIDHoverHeight;
     private PIDHoverType _PIDHoverType;
-    private float _PIDHoverTao;
+    private float _PIDHoverTau;
 
     public BSPrim(uint localID, String primName, BSScene parent_scene, OMV.Vector3 pos, OMV.Vector3 size,
                        OMV.Quaternion rotation, PrimitiveBaseShape pbs, bool pisPhysical)
@@ -93,23 +90,27 @@ public sealed class BSPrim : BSPhysObject
         _physicsActorType = (int)ActorTypes.Prim;
         _position = pos;
         _size = size;
-        Scale = size;   // the scale will be set by CreateGeom depending on object type
+        Scale = size;   // prims are the size the user wants them to be (different for BSCharactes).
         _orientation = rotation;
-        _buoyancy = 1f;
+        _buoyancy = 0f;
         _velocity = OMV.Vector3.Zero;
         _rotationalVelocity = OMV.Vector3.Zero;
         BaseShape = pbs;
         _isPhysical = pisPhysical;
         _isVolumeDetect = false;
-        _friction = PhysicsScene.Params.defaultFriction;  // TODO: compute based on object material
-        _density = PhysicsScene.Params.defaultDensity;    // TODO: compute based on object material
+
+        // Someday set default attributes based on the material but, for now, we don't know the prim material yet.
+        // MaterialAttributes primMat = BSMaterials.GetAttributes(Material, pisPhysical);
+        _density = PhysicsScene.Params.defaultDensity;
+        _friction = PhysicsScene.Params.defaultFriction;
         _restitution = PhysicsScene.Params.defaultRestitution;
+
         _vehicle = new BSDynamics(PhysicsScene, this);            // add vehicleness
+
         _mass = CalculateMass();
 
-        // No body or shape yet
-        PhysBody = new BulletBody(LocalID, IntPtr.Zero);
-        PhysShape = new BulletShape(IntPtr.Zero);
+        // Cause linkset variables to be initialized (like mass)
+        Linkset.Refresh(this);
 
         DetailLog("{0},BSPrim.constructor,call", LocalID);
         // do the actual object creation at taint time
@@ -117,7 +118,7 @@ public sealed class BSPrim : BSPhysObject
         {
             CreateGeomAndObject(true);
 
-            CurrentCollisionFlags = BulletSimAPI.GetCollisionFlags2(PhysBody.ptr);
+            CurrentCollisionFlags = PhysicsScene.PE.GetCollisionFlags(PhysBody);
         });
     }
 
@@ -125,6 +126,7 @@ public sealed class BSPrim : BSPhysObject
     public override void Destroy()
     {
         // m_log.DebugFormat("{0}: Destroy, id={1}", LogHeader, LocalID);
+        base.Destroy();
 
         // Undo any links between me and any other object
         BSPhysObject parentBefore = Linkset.LinksetRoot;
@@ -143,7 +145,9 @@ public sealed class BSPrim : BSPhysObject
             DetailLog("{0},BSPrim.Destroy,taint,", LocalID);
             // If there are physical body and shape, release my use of same.
             PhysicsScene.Shapes.DereferenceBody(PhysBody, true, null);
+            PhysBody.Clear();
             PhysicsScene.Shapes.DereferenceShape(PhysShape, true, null);
+            PhysShape.Clear();
         });
     }
 
@@ -157,16 +161,15 @@ public sealed class BSPrim : BSPhysObject
             // We presume the scale and size are the same. If scale must be changed for
             //     the physical shape, that is done when the geometry is built.
             _size = value;
+            Scale = _size;
             ForceBodyShapeRebuild(false);
         }
     }
-    // Scale is what we set in the physics engine. It is different than 'size' in that
-    //     'size' can be encorporated into the mesh. In that case, the scale is <1,1,1>.
-    public override OMV.Vector3 Scale { get; set; }
 
     public override PrimitiveBaseShape Shape {
         set {
             BaseShape = value;
+            LastAssetBuildFailed = false;
             ForceBodyShapeRebuild(false);
         }
     }
@@ -176,7 +179,6 @@ public sealed class BSPrim : BSPhysObject
 
     public override bool ForceBodyShapeRebuild(bool inTaintTime)
     {
-        LastAssetBuildFailed = false;
         PhysicsScene.TaintedObject(inTaintTime, "BSPrim.ForceBodyShapeRebuild", delegate()
         {
             _mass = CalculateMass();   // changing the shape changes the mass
@@ -189,13 +191,17 @@ public sealed class BSPrim : BSPhysObject
         }
     }
     public override bool Selected {
-        set {
-            _isSelected = value;
-            PhysicsScene.TaintedObject("BSPrim.setSelected", delegate()
+        set
+        {
+            if (value != _isSelected)
             {
-                DetailLog("{0},BSPrim.selected,taint,selected={1}", LocalID, _isSelected);
-                SetObjectDynamic(false);
-            });
+                _isSelected = value;
+                PhysicsScene.TaintedObject("BSPrim.setSelected", delegate()
+                {
+                    DetailLog("{0},BSPrim.selected,taint,selected={1}", LocalID, _isSelected);
+                    SetObjectDynamic(false);
+                });
+            }
         }
     }
     public override void CrossingFailure() { return; }
@@ -244,7 +250,8 @@ public sealed class BSPrim : BSPhysObject
         // Zero some other properties in the physics engine
         PhysicsScene.TaintedObject(inTaintTime, "BSPrim.ZeroMotion", delegate()
         {
-            BulletSimAPI.ClearAllForces2(PhysBody.ptr);
+            if (PhysBody.HasPhysicalBody)
+                PhysicsScene.PE.ClearAllForces(PhysBody);
         });
     }
     public override void ZeroAngularMotion(bool inTaintTime)
@@ -253,8 +260,12 @@ public sealed class BSPrim : BSPhysObject
         // Zero some other properties in the physics engine
         PhysicsScene.TaintedObject(inTaintTime, "BSPrim.ZeroMotion", delegate()
         {
-            BulletSimAPI.SetInterpolationAngularVelocity2(PhysBody.ptr, OMV.Vector3.Zero);
-            BulletSimAPI.SetAngularVelocity2(PhysBody.ptr, OMV.Vector3.Zero);
+            // DetailLog("{0},BSPrim.ZeroAngularMotion,call,rotVel={1}", LocalID, _rotationalVelocity);
+            if (PhysBody.HasPhysicalBody)
+            {
+                PhysicsScene.PE.SetInterpolationAngularVelocity(PhysBody, _rotationalVelocity);
+                PhysicsScene.PE.SetAngularVelocity(PhysBody, _rotationalVelocity);
+            }
         });
     }
 
@@ -271,41 +282,50 @@ public sealed class BSPrim : BSPhysObject
     }
     public override OMV.Vector3 Position {
         get {
+            /* NOTE: this refetch is not necessary. The simulator knows about linkset children
+             *    and does not fetch this position info for children. Thus this is commented out.
             // child prims move around based on their parent. Need to get the latest location
             if (!Linkset.IsRoot(this))
-                _position = Linkset.Position(this);
+                _position = Linkset.PositionGet(this);
+            */
 
             // don't do the GetObjectPosition for root elements because this function is called a zillion times.
-            // _position = BulletSimAPI.GetObjectPosition2(PhysicsScene.World.ptr, BSBody.ptr);
+            // _position = PhysicsScene.PE.GetObjectPosition2(PhysicsScene.World, BSBody);
             return _position;
         }
         set {
             // If the position must be forced into the physics engine, use ForcePosition.
+            // All positions are given in world positions.
             if (_position == value)
             {
+                DetailLog("{0},BSPrim.setPosition,call,positionNotChanging,pos={1},orient={2}", LocalID, _position, _orientation);
                 return;
             }
             _position = value;
-            // TODO: what does it mean to set the position of a child prim?? Rebuild the constraint?
             PositionSanityCheck(false);
+
+            // A linkset might need to know if a component information changed.
+            Linkset.UpdateProperties(this, false);
+
             PhysicsScene.TaintedObject("BSPrim.setPosition", delegate()
             {
-                // DetailLog("{0},BSPrim.SetPosition,taint,pos={1},orient={2}", LocalID, _position, _orientation);
-                BulletSimAPI.SetTranslation2(PhysBody.ptr, _position, _orientation);
-                ActivateIfPhysical(false);
+                DetailLog("{0},BSPrim.SetPosition,taint,pos={1},orient={2}", LocalID, _position, _orientation);
+                ForcePosition = _position;
             });
         }
     }
     public override OMV.Vector3 ForcePosition {
         get {
-            _position = BulletSimAPI.GetPosition2(PhysBody.ptr);
+            _position = PhysicsScene.PE.GetPosition(PhysBody);
             return _position;
         }
         set {
             _position = value;
-            // PositionSanityCheck();   // Don't do this! Causes a loop and caller should know better.
-            BulletSimAPI.SetTranslation2(PhysBody.ptr, _position, _orientation);
-            ActivateIfPhysical(false);
+            if (PhysBody.HasPhysicalBody)
+            {
+                PhysicsScene.PE.SetTranslation(PhysBody, _position, _orientation);
+                ActivateIfPhysical(false);
+            }
         }
     }
 
@@ -316,51 +336,58 @@ public sealed class BSPrim : BSPhysObject
     {
         bool ret = false;
 
+        if (!PhysicsScene.TerrainManager.IsWithinKnownTerrain(_position))
+        {
+            // The physical object is out of the known/simulated area.
+            // Upper levels of code will handle the transition to other areas so, for
+            //     the time, we just ignore the position.
+            return ret;
+        }
+
         float terrainHeight = PhysicsScene.TerrainManager.GetTerrainHeightAtXYZ(_position);
         OMV.Vector3 upForce = OMV.Vector3.Zero;
-        if (Position.Z < terrainHeight)
+        if (RawPosition.Z < terrainHeight)
         {
             DetailLog("{0},BSPrim.PositionAdjustUnderGround,call,pos={1},terrain={2}", LocalID, _position, terrainHeight);
             float targetHeight = terrainHeight + (Size.Z / 2f);
             // Upforce proportional to the distance away from the terrain. Correct the error in 1 sec.
-            upForce.Z = (terrainHeight - Position.Z) * 1f;
+            upForce.Z = (terrainHeight - RawPosition.Z) * 1f;
             ret = true;
         }
 
         if ((CurrentCollisionFlags & CollisionFlags.BS_FLOATS_ON_WATER) != 0)
         {
-            float waterHeight = PhysicsScene.GetWaterLevelAtXYZ(_position);
+            float waterHeight = PhysicsScene.TerrainManager.GetWaterLevelAtXYZ(_position);
             // TODO: a floating motor so object will bob in the water
-            if (Math.Abs(Position.Z - waterHeight) > 0.1f)
+            if (Math.Abs(RawPosition.Z - waterHeight) > 0.1f)
             {
                 // Upforce proportional to the distance away from the water. Correct the error in 1 sec.
-                upForce.Z = (waterHeight - Position.Z) * 1f;
+                upForce.Z = (waterHeight - RawPosition.Z) * 1f;
                 ret = true;
             }
         }
 
-        // TODO: check for out of bounds
-
         // The above code computes a force to apply to correct any out-of-bounds problems. Apply same.
+        // TODO: This should be intergrated with a geneal physics action mechanism.
+        // TODO: This should be moderated with PID'ness.
         if (ret)
         {
-            PhysicsScene.TaintedObject(inTaintTime, "BSPrim.PositionSanityCheck:belowTerrain", delegate()
-            {
-                // Apply upforce and overcome gravity.
-                ForceVelocity = ForceVelocity + upForce - PhysicsScene.DefaultGravity;
-            });
+            // Apply upforce and overcome gravity.
+            OMV.Vector3 correctionForce = upForce - PhysicsScene.DefaultGravity;
+            DetailLog("{0},BSPrim.PositionSanityCheck,applyForce,pos={1},upForce={2},correctionForce={3}", LocalID, _position, upForce, correctionForce);
+            AddForce(correctionForce, false, inTaintTime);
         }
         return ret;
     }
 
     // Return the effective mass of the object.
-    // If there are multiple items in the linkset, add them together for the root
+        // The definition of this call is to return the mass of the prim.
+        // If the simulator cares about the mass of the linkset, it will sum it itself.
     public override float Mass
     {
         get
         {
-            return Linkset.LinksetMass;
-            // return _mass;
+            return _mass;
         }
     }
 
@@ -370,25 +397,64 @@ public sealed class BSPrim : BSPhysObject
     }
     // Set the physical mass to the passed mass.
     // Note that this does not change _mass!
-    public override void UpdatePhysicalMassProperties(float physMass)
+    public override void UpdatePhysicalMassProperties(float physMass, bool inWorld)
     {
-        if (IsStatic)
-        {
-            Inertia = OMV.Vector3.Zero;
-            BulletSimAPI.SetMassProps2(PhysBody.ptr, 0f, Inertia);
-            BulletSimAPI.UpdateInertiaTensor2(PhysBody.ptr);
-        }
-        else
+        if (PhysBody.HasPhysicalBody)
         {
-            Inertia = BulletSimAPI.CalculateLocalInertia2(PhysShape.ptr, physMass);
-            BulletSimAPI.SetMassProps2(PhysBody.ptr, physMass, Inertia);
-            BulletSimAPI.UpdateInertiaTensor2(PhysBody.ptr);
-            // center of mass is at the zero of the object
-            // DEBUG DEBUG BulletSimAPI.SetCenterOfMassByPosRot2(PhysBody.ptr, ForcePosition, ForceOrientation);
-            DetailLog("{0},BSPrim.UpdateMassProperties,mass={1},localInertia={2}", LocalID, physMass, Inertia);
+            if (IsStatic)
+            {
+                PhysicsScene.PE.SetGravity(PhysBody, PhysicsScene.DefaultGravity);
+                Inertia = OMV.Vector3.Zero;
+                PhysicsScene.PE.SetMassProps(PhysBody, 0f, Inertia);
+                PhysicsScene.PE.UpdateInertiaTensor(PhysBody);
+            }
+            else
+            {
+                OMV.Vector3 grav = ComputeGravity();
+
+                if (inWorld)
+                {
+                    // Changing interesting properties doesn't change proxy and collision cache
+                    //    information. The Bullet solution is to re-add the object to the world
+                    //    after parameters are changed.
+                    PhysicsScene.PE.RemoveObjectFromWorld(PhysicsScene.World, PhysBody);
+                }
+
+                // The computation of mass props requires gravity to be set on the object.
+                PhysicsScene.PE.SetGravity(PhysBody, grav);
+
+                Inertia = PhysicsScene.PE.CalculateLocalInertia(PhysShape, physMass);
+                PhysicsScene.PE.SetMassProps(PhysBody, physMass, Inertia);
+                PhysicsScene.PE.UpdateInertiaTensor(PhysBody);
+
+                // center of mass is at the zero of the object
+                // DEBUG DEBUG PhysicsScene.PE.SetCenterOfMassByPosRot(PhysBody, ForcePosition, ForceOrientation);
+                DetailLog("{0},BSPrim.UpdateMassProperties,mass={1},localInertia={2},grav={3},inWorld={4}", LocalID, physMass, Inertia, grav, inWorld);
+
+                if (inWorld)
+                {
+                    AddObjectToPhysicalWorld();
+                }
+
+                // Must set gravity after it has been added to the world because, for unknown reasons,
+                //     adding the object resets the object's gravity to world gravity
+                PhysicsScene.PE.SetGravity(PhysBody, grav);
+
+            }
         }
     }
 
+    // Return what gravity should be set to this very moment
+    private OMV.Vector3 ComputeGravity()
+    {
+        OMV.Vector3 ret = PhysicsScene.DefaultGravity;
+
+        if (!IsStatic)
+            ret *= (1f - Buoyancy);
+
+        return ret;
+    }
+
     // Is this used?
     public override OMV.Vector3 CenterOfMass
     {
@@ -405,11 +471,26 @@ public sealed class BSPrim : BSPhysObject
         get { return _force; }
         set {
             _force = value;
-            PhysicsScene.TaintedObject("BSPrim.setForce", delegate()
+            if (_force != OMV.Vector3.Zero)
             {
-                // DetailLog("{0},BSPrim.setForce,taint,force={1}", LocalID, _force);
-                BulletSimAPI.SetObjectForce2(PhysBody.ptr, _force);
-            });
+                // If the force is non-zero, it must be reapplied each tick because
+                //    Bullet clears the forces applied last frame.
+                RegisterPreStepAction("BSPrim.setForce", LocalID,
+                    delegate(float timeStep)
+                    {
+                        DetailLog("{0},BSPrim.setForce,preStep,force={1}", LocalID, _force);
+                        if (PhysBody.HasPhysicalBody)
+                        {
+                            PhysicsScene.PE.ApplyCentralForce(PhysBody, _force);
+                            ActivateIfPhysical(false);
+                        }
+                    }
+                );
+            }
+            else
+            {
+                UnRegisterPreStepAction("BSPrim.setForce", LocalID);
+            }
         }
     }
 
@@ -420,15 +501,18 @@ public sealed class BSPrim : BSPhysObject
         set {
             Vehicle type = (Vehicle)value;
 
-            // Tell the scene about the vehicle so it will get processing each frame.
-            PhysicsScene.VehicleInSceneTypeChanged(this, type);
-
             PhysicsScene.TaintedObject("setVehicleType", delegate()
             {
                 // Done at taint time so we're sure the physics engine is not using the variables
                 // Vehicle code changes the parameters for this vehicle type.
                 _vehicle.ProcessTypeChange(type);
                 ActivateIfPhysical(false);
+
+                // If an active vehicle, register the vehicle code to be called before each step
+                if (_vehicle.Type == Vehicle.TYPE_NONE)
+                    UnRegisterPreStepAction("BSPrim.Vehicle", LocalID);
+                else
+                    RegisterPreStepAction("BSPrim.Vehicle", LocalID, _vehicle.Step);
             });
         }
     }
@@ -464,23 +548,6 @@ public sealed class BSPrim : BSPhysObject
         });
     }
 
-    // Called each simulation step to advance vehicle characteristics.
-    // Called from Scene when doing simulation step so we're in taint processing time.
-    public override void StepVehicle(float timeStep)
-    {
-        if (IsPhysical && _vehicle.IsActive)
-        {
-            _vehicle.Step(timeStep);
-            /* // TEST TEST DEBUG DEBUG -- trying to reduce the extra action of Bullet simulation step
-            PhysicsScene.PostTaintObject("BSPrim.StepVehicles", LocalID, delegate()
-            {
-                // This resets the interpolation values and recomputes the tensor variables
-                BulletSimAPI.SetCenterOfMassByPosRot2(BSBody.ptr, ForcePosition, ForceOrientation);
-            });
-             */
-        }
-    }
-
     // Allows the detection of collisions with inherently non-physical prims. see llVolumeDetect for more
     public override void SetVolumeDetect(int param) {
         bool newValue = (param != 0);
@@ -495,6 +562,11 @@ public sealed class BSPrim : BSPhysObject
         }
         return;
     }
+    public override OMV.Vector3 RawVelocity
+    {
+        get { return _velocity; }
+        set { _velocity = value; }
+    }
     public override OMV.Vector3 Velocity {
         get { return _velocity; }
         set {
@@ -502,22 +574,43 @@ public sealed class BSPrim : BSPhysObject
             PhysicsScene.TaintedObject("BSPrim.setVelocity", delegate()
             {
                 // DetailLog("{0},BSPrim.SetVelocity,taint,vel={1}", LocalID, _velocity);
-                BulletSimAPI.SetLinearVelocity2(PhysBody.ptr, _velocity);
+                ForceVelocity = _velocity;
             });
         }
     }
     public override OMV.Vector3 ForceVelocity {
         get { return _velocity; }
         set {
+            PhysicsScene.AssertInTaintTime("BSPrim.ForceVelocity");
+
             _velocity = value;
-            BulletSimAPI.SetLinearVelocity2(PhysBody.ptr, _velocity);
+            if (PhysBody.HasPhysicalBody)
+            {
+                PhysicsScene.PE.SetLinearVelocity(PhysBody, _velocity);
+                ActivateIfPhysical(false);
+            }
         }
     }
     public override OMV.Vector3 Torque {
         get { return _torque; }
         set {
             _torque = value;
-            AddAngularForce(_torque, false, false);
+            if (_torque != OMV.Vector3.Zero)
+            {
+                // If the torque is non-zero, it must be reapplied each tick because
+                //    Bullet clears the forces applied last frame.
+                RegisterPreStepAction("BSPrim.setTorque", LocalID,
+                    delegate(float timeStep)
+                    {
+                        if (PhysBody.HasPhysicalBody)
+                            AddAngularForce(_torque, false, true);
+                    }
+                );
+            }
+            else
+            {
+                UnRegisterPreStepAction("BSPrim.setTorque", LocalID);
+            }
             // DetailLog("{0},BSPrim.SetTorque,call,torque={1}", LocalID, _torque);
         }
     }
@@ -537,23 +630,32 @@ public sealed class BSPrim : BSPhysObject
     }
     public override OMV.Quaternion Orientation {
         get {
+            /* NOTE: this refetch is not necessary. The simulator knows about linkset children
+             *    and does not fetch this position info for children. Thus this is commented out.
             // Children move around because tied to parent. Get a fresh value.
             if (!Linkset.IsRoot(this))
             {
-                _orientation = Linkset.Orientation(this);
+                _orientation = Linkset.OrientationGet(this);
             }
+             */
             return _orientation;
         }
         set {
             if (_orientation == value)
                 return;
             _orientation = value;
-            // TODO: what does it mean if a child in a linkset changes its orientation? Rebuild the constraint?
+
+            // A linkset might need to know if a component information changed.
+            Linkset.UpdateProperties(this, false);
+
             PhysicsScene.TaintedObject("BSPrim.setOrientation", delegate()
             {
-                // _position = BulletSimAPI.GetObjectPosition2(PhysicsScene.World.ptr, BSBody.ptr);
-                // DetailLog("{0},BSPrim.setOrientation,taint,pos={1},orient={2}", LocalID, _position, _orientation);
-                BulletSimAPI.SetTranslation2(PhysBody.ptr, _position, _orientation);
+                if (PhysBody.HasPhysicalBody)
+                {
+                    // _position = PhysicsScene.PE.GetObjectPosition(PhysicsScene.World, BSBody);
+                    // DetailLog("{0},BSPrim.setOrientation,taint,pos={1},orient={2}", LocalID, _position, _orientation);
+                    PhysicsScene.PE.SetTranslation(PhysBody, _position, _orientation);
+                }
             });
         }
     }
@@ -562,13 +664,13 @@ public sealed class BSPrim : BSPhysObject
     {
         get
         {
-            _orientation = BulletSimAPI.GetOrientation2(PhysBody.ptr);
+            _orientation = PhysicsScene.PE.GetOrientation(PhysBody);
             return _orientation;
         }
         set
         {
             _orientation = value;
-            BulletSimAPI.SetTranslation2(PhysBody.ptr, _position, _orientation);
+            PhysicsScene.PE.SetTranslation(PhysBody, _position, _orientation);
         }
     }
     public override int PhysicsActorType {
@@ -583,7 +685,7 @@ public sealed class BSPrim : BSPhysObject
                 _isPhysical = value;
                 PhysicsScene.TaintedObject("BSPrim.setIsPhysical", delegate()
                 {
-                    // DetailLog("{0},setIsPhysical,taint,isPhys={1}", LocalID, _isPhysical);
+                    DetailLog("{0},setIsPhysical,taint,isPhys={1}", LocalID, _isPhysical);
                     SetObjectDynamic(true);
                     // whether phys-to-static or static-to-phys, the object is not moving.
                     ZeroMotion(true);
@@ -624,7 +726,7 @@ public sealed class BSPrim : BSPhysObject
 
         // Mangling all the physical properties requires the object not be in the physical world.
         // This is a NOOP if the object is not in the world (BulletSim and Bullet ignore objects not found).
-        BulletSimAPI.RemoveObjectFromWorld2(PhysicsScene.World.ptr, PhysBody.ptr);
+        PhysicsScene.PE.RemoveObjectFromWorld(PhysicsScene.World, PhysBody);
 
         // Set up the object physicalness (does gravity and collisions move this object)
         MakeDynamic(IsStatic);
@@ -638,16 +740,10 @@ public sealed class BSPrim : BSPhysObject
         // Make solid or not (do things bounce off or pass through this object).
         MakeSolid(IsSolid);
 
-        BulletSimAPI.AddObjectToWorld2(PhysicsScene.World.ptr, PhysBody.ptr);
+        AddObjectToPhysicalWorld();
 
         // Rebuild its shape
-        BulletSimAPI.UpdateSingleAabb2(PhysicsScene.World.ptr, PhysBody.ptr);
-
-        // Collision filter can be set only when the object is in the world
-        if (PhysBody.collisionFilter != 0 || PhysBody.collisionMask != 0)
-        {
-            BulletSimAPI.SetCollisionFilterMask2(PhysBody.ptr, (uint)PhysBody.collisionFilter, (uint)PhysBody.collisionMask);
-        }
+        PhysicsScene.PE.UpdateSingleAabb(PhysicsScene.World, PhysBody);
 
         // Recompute any linkset parameters.
         // When going from non-physical to physical, this re-enables the constraints that
@@ -655,8 +751,8 @@ public sealed class BSPrim : BSPhysObject
         // For compound based linksets, this enables and disables interactions of the children.
         Linkset.Refresh(this);
 
-        DetailLog("{0},BSPrim.UpdatePhysicalParameters,taintExit,static={1},solid={2},mass={3},collide={4},cf={5:X},body={6},shape={7}",
-                        LocalID, IsStatic, IsSolid, _mass, SubscribedEvents(), CurrentCollisionFlags, PhysBody, PhysShape);
+        DetailLog("{0},BSPrim.UpdatePhysicalParameters,taintExit,static={1},solid={2},mass={3},collide={4},cf={5:X},cType={6},body={7},shape={8}",
+                        LocalID, IsStatic, IsSolid, Mass, SubscribedEvents(), CurrentCollisionFlags, PhysBody.collisionType, PhysBody, PhysShape);
     }
 
     // "Making dynamic" means changing to and from static.
@@ -669,74 +765,80 @@ public sealed class BSPrim : BSPhysObject
         if (makeStatic)
         {
             // Become a Bullet 'static' object type
-            CurrentCollisionFlags = BulletSimAPI.AddToCollisionFlags2(PhysBody.ptr, CollisionFlags.CF_STATIC_OBJECT);
+            CurrentCollisionFlags = PhysicsScene.PE.AddToCollisionFlags(PhysBody, CollisionFlags.CF_STATIC_OBJECT);
             // Stop all movement
             ZeroMotion(true);
-            // Center of mass is at the center of the object
-            // DEBUG DEBUG BulletSimAPI.SetCenterOfMassByPosRot2(Linkset.LinksetRoot.PhysBody.ptr, _position, _orientation);
+
+            // Set various physical properties so other object interact properly
+            MaterialAttributes matAttrib = BSMaterials.GetAttributes(Material, false);
+            PhysicsScene.PE.SetFriction(PhysBody, matAttrib.friction);
+            PhysicsScene.PE.SetRestitution(PhysBody, matAttrib.restitution);
+
             // Mass is zero which disables a bunch of physics stuff in Bullet
-            UpdatePhysicalMassProperties(0f);
+            UpdatePhysicalMassProperties(0f, false);
             // Set collision detection parameters
-            if (PhysicsScene.Params.ccdMotionThreshold > 0f)
+            if (BSParam.CcdMotionThreshold > 0f)
             {
-                BulletSimAPI.SetCcdMotionThreshold2(PhysBody.ptr, PhysicsScene.Params.ccdMotionThreshold);
-                BulletSimAPI.SetCcdSweptSphereRadius2(PhysBody.ptr, PhysicsScene.Params.ccdSweptSphereRadius);
+                PhysicsScene.PE.SetCcdMotionThreshold(PhysBody, BSParam.CcdMotionThreshold);
+                PhysicsScene.PE.SetCcdSweptSphereRadius(PhysBody, BSParam.CcdSweptSphereRadius);
             }
-            // There can be special things needed for implementing linksets
-            Linkset.MakeStatic(this);
+
             // The activation state is 'disabled' so Bullet will not try to act on it.
-            BulletSimAPI.ForceActivationState2(PhysBody.ptr, ActivationState.DISABLE_SIMULATION);
+            // PhysicsScene.PE.ForceActivationState(PhysBody, ActivationState.DISABLE_SIMULATION);
             // Start it out sleeping and physical actions could wake it up.
-            // BulletSimAPI.ForceActivationState2(BSBody.ptr, ActivationState.ISLAND_SLEEPING);
+            PhysicsScene.PE.ForceActivationState(PhysBody, ActivationState.ISLAND_SLEEPING);
+
+            // This collides like a static object
+            PhysBody.collisionType = CollisionType.Static;
 
-            PhysBody.collisionFilter = CollisionFilterGroups.StaticObjectFilter;
-            PhysBody.collisionMask = CollisionFilterGroups.StaticObjectMask;
+            // There can be special things needed for implementing linksets
+            Linkset.MakeStatic(this);
         }
         else
         {
             // Not a Bullet static object
-            CurrentCollisionFlags = BulletSimAPI.RemoveFromCollisionFlags2(PhysBody.ptr, CollisionFlags.CF_STATIC_OBJECT);
+            CurrentCollisionFlags = PhysicsScene.PE.RemoveFromCollisionFlags(PhysBody, CollisionFlags.CF_STATIC_OBJECT);
 
-            // Set various physical properties so internal dynamic properties will get computed correctly as they are set
-            BulletSimAPI.SetFriction2(PhysBody.ptr, PhysicsScene.Params.defaultFriction);
-            BulletSimAPI.SetRestitution2(PhysBody.ptr, PhysicsScene.Params.defaultRestitution);
+            // Set various physical properties so other object interact properly
+            MaterialAttributes matAttrib = BSMaterials.GetAttributes(Material, true);
+            PhysicsScene.PE.SetFriction(PhysBody, matAttrib.friction);
+            PhysicsScene.PE.SetRestitution(PhysBody, matAttrib.restitution);
 
             // per http://www.bulletphysics.org/Bullet/phpBB3/viewtopic.php?t=3382
             // Since this can be called multiple times, only zero forces when becoming physical
-            // BulletSimAPI.ClearAllForces2(BSBody.ptr);
+            // PhysicsScene.PE.ClearAllForces(BSBody);
 
             // For good measure, make sure the transform is set through to the motion state
-            BulletSimAPI.SetTranslation2(PhysBody.ptr, _position, _orientation);
+            PhysicsScene.PE.SetTranslation(PhysBody, _position, _orientation);
 
             // Center of mass is at the center of the object
-            // DEBUG DEBUG BulletSimAPI.SetCenterOfMassByPosRot2(Linkset.LinksetRoot.PhysBody.ptr, _position, _orientation);
+            // DEBUG DEBUG PhysicsScene.PE.SetCenterOfMassByPosRot(Linkset.LinksetRoot.PhysBody, _position, _orientation);
 
             // A dynamic object has mass
-            UpdatePhysicalMassProperties(RawMass);
+            UpdatePhysicalMassProperties(RawMass, false);
 
             // Set collision detection parameters
-            if (PhysicsScene.Params.ccdMotionThreshold > 0f)
+            if (BSParam.CcdMotionThreshold > 0f)
             {
-                BulletSimAPI.SetCcdMotionThreshold2(PhysBody.ptr, PhysicsScene.Params.ccdMotionThreshold);
-                BulletSimAPI.SetCcdSweptSphereRadius2(PhysBody.ptr, PhysicsScene.Params.ccdSweptSphereRadius);
+                PhysicsScene.PE.SetCcdMotionThreshold(PhysBody, BSParam.CcdMotionThreshold);
+                PhysicsScene.PE.SetCcdSweptSphereRadius(PhysBody, BSParam.CcdSweptSphereRadius);
             }
 
             // Various values for simulation limits
-            BulletSimAPI.SetDamping2(PhysBody.ptr, PhysicsScene.Params.linearDamping, PhysicsScene.Params.angularDamping);
-            BulletSimAPI.SetDeactivationTime2(PhysBody.ptr, PhysicsScene.Params.deactivationTime);
-            BulletSimAPI.SetSleepingThresholds2(PhysBody.ptr, PhysicsScene.Params.linearSleepingThreshold, PhysicsScene.Params.angularSleepingThreshold);
-            BulletSimAPI.SetContactProcessingThreshold2(PhysBody.ptr, PhysicsScene.Params.contactProcessingThreshold);
+            PhysicsScene.PE.SetDamping(PhysBody, BSParam.LinearDamping, BSParam.AngularDamping);
+            PhysicsScene.PE.SetDeactivationTime(PhysBody, BSParam.DeactivationTime);
+            PhysicsScene.PE.SetSleepingThresholds(PhysBody, BSParam.LinearSleepingThreshold, BSParam.AngularSleepingThreshold);
+            PhysicsScene.PE.SetContactProcessingThreshold(PhysBody, BSParam.ContactProcessingThreshold);
 
-            // There might be special things needed for implementing linksets.
-            Linkset.MakeDynamic(this);
+            // This collides like an object.
+            PhysBody.collisionType = CollisionType.Dynamic;
 
             // Force activation of the object so Bullet will act on it.
             // Must do the ForceActivationState2() to overcome the DISABLE_SIMULATION from static objects.
-            BulletSimAPI.ForceActivationState2(PhysBody.ptr, ActivationState.ACTIVE_TAG);
-            // BulletSimAPI.Activate2(BSBody.ptr, true);
+            PhysicsScene.PE.ForceActivationState(PhysBody, ActivationState.ACTIVE_TAG);
 
-            PhysBody.collisionFilter = CollisionFilterGroups.ObjectFilter;
-            PhysBody.collisionMask = CollisionFilterGroups.ObjectMask;
+            // There might be special things needed for implementing linksets.
+            Linkset.MakeDynamic(this);
         }
     }
 
@@ -746,7 +848,7 @@ public sealed class BSPrim : BSPhysObject
     //     the functions after this one set up the state of a possibly newly created collision body.
     private void MakeSolid(bool makeSolid)
     {
-        CollisionObjectTypes bodyType = (CollisionObjectTypes)BulletSimAPI.GetBodyType2(PhysBody.ptr);
+        CollisionObjectTypes bodyType = (CollisionObjectTypes)PhysicsScene.PE.GetBodyType(PhysBody);
         if (makeSolid)
         {
             // Verify the previous code created the correct shape for this type of thing.
@@ -754,7 +856,7 @@ public sealed class BSPrim : BSPhysObject
             {
                 m_log.ErrorFormat("{0} MakeSolid: physical body of wrong type for solidity. id={1}, type={2}", LogHeader, LocalID, bodyType);
             }
-            CurrentCollisionFlags = BulletSimAPI.RemoveFromCollisionFlags2(PhysBody.ptr, CollisionFlags.CF_NO_CONTACT_RESPONSE);
+            CurrentCollisionFlags = PhysicsScene.PE.RemoveFromCollisionFlags(PhysBody, CollisionFlags.CF_NO_CONTACT_RESPONSE);
         }
         else
         {
@@ -762,9 +864,10 @@ public sealed class BSPrim : BSPhysObject
             {
                 m_log.ErrorFormat("{0} MakeSolid: physical body of wrong type for non-solidness. id={1}, type={2}", LogHeader, LocalID, bodyType);
             }
-            CurrentCollisionFlags = BulletSimAPI.AddToCollisionFlags2(PhysBody.ptr, CollisionFlags.CF_NO_CONTACT_RESPONSE);
-            PhysBody.collisionFilter = CollisionFilterGroups.VolumeDetectFilter;
-            PhysBody.collisionMask = CollisionFilterGroups.VolumeDetectMask;
+            CurrentCollisionFlags = PhysicsScene.PE.AddToCollisionFlags(PhysBody, CollisionFlags.CF_NO_CONTACT_RESPONSE);
+
+            // Change collision info from a static object to a ghosty collision object
+            PhysBody.collisionType = CollisionType.VolumeDetect;
         }
     }
 
@@ -773,8 +876,8 @@ public sealed class BSPrim : BSPhysObject
     // Called in taint-time!!
     private void ActivateIfPhysical(bool forceIt)
     {
-        if (IsPhysical)
-            BulletSimAPI.Activate2(PhysBody.ptr, forceIt);
+        if (IsPhysical && PhysBody.HasPhysicalBody)
+            PhysicsScene.PE.Activate(PhysBody, forceIt);
     }
 
     // Turn on or off the flag controlling whether collision events are returned to the simulator.
@@ -782,11 +885,27 @@ public sealed class BSPrim : BSPhysObject
     {
         if (wantsCollisionEvents)
         {
-            CurrentCollisionFlags = BulletSimAPI.AddToCollisionFlags2(PhysBody.ptr, CollisionFlags.BS_SUBSCRIBE_COLLISION_EVENTS);
+            CurrentCollisionFlags = PhysicsScene.PE.AddToCollisionFlags(PhysBody, CollisionFlags.BS_SUBSCRIBE_COLLISION_EVENTS);
+        }
+        else
+        {
+            CurrentCollisionFlags = PhysicsScene.PE.RemoveFromCollisionFlags(PhysBody, CollisionFlags.BS_SUBSCRIBE_COLLISION_EVENTS);
+        }
+    }
+
+    // Add me to the physical world.
+    // Object MUST NOT already be in the world.
+    // This routine exists because some assorted properties get mangled by adding to the world.
+    internal void AddObjectToPhysicalWorld()
+    {
+        if (PhysBody.HasPhysicalBody)
+        {
+            PhysicsScene.PE.AddObjectToWorld(PhysicsScene.World, PhysBody);
         }
         else
         {
-            CurrentCollisionFlags = BulletSimAPI.RemoveFromCollisionFlags2(PhysBody.ptr, CollisionFlags.BS_SUBSCRIBE_COLLISION_EVENTS);
+            m_log.ErrorFormat("{0} Attempt to add physical object without body. id={1}", LogHeader, LocalID);
+            DetailLog("{0},BSPrim.UpdatePhysicalParameters,addObjectWithoutBody,cType={1}", LocalID, PhysBody.collisionType);
         }
     }
 
@@ -805,18 +924,6 @@ public sealed class BSPrim : BSPhysObject
         get { return _throttleUpdates; }
         set { _throttleUpdates = value; }
     }
-    public override bool IsColliding {
-        get { return (CollidingStep == PhysicsScene.SimulationStep); }
-        set { _isColliding = value; }
-    }
-    public override bool CollidingGround {
-        get { return (CollidingGroundStep == PhysicsScene.SimulationStep); }
-        set { _collidingGround = value; }
-    }
-    public override bool CollidingObj {
-        get { return _collidingObj; }
-        set { _collidingObj = value; }
-    }
     public bool IsPhantom {
         get {
             // SceneObjectPart removes phantom objects from the physics scene
@@ -831,23 +938,14 @@ public sealed class BSPrim : BSPhysObject
             PhysicsScene.TaintedObject("BSPrim.setFloatOnWater", delegate()
             {
                 if (_floatOnWater)
-                    CurrentCollisionFlags = BulletSimAPI.AddToCollisionFlags2(PhysBody.ptr, CollisionFlags.BS_FLOATS_ON_WATER);
+                    CurrentCollisionFlags = PhysicsScene.PE.AddToCollisionFlags(PhysBody, CollisionFlags.BS_FLOATS_ON_WATER);
                 else
-                    CurrentCollisionFlags = BulletSimAPI.RemoveFromCollisionFlags2(PhysBody.ptr, CollisionFlags.BS_FLOATS_ON_WATER);
+                    CurrentCollisionFlags = PhysicsScene.PE.RemoveFromCollisionFlags(PhysBody, CollisionFlags.BS_FLOATS_ON_WATER);
             });
         }
     }
     public override OMV.Vector3 RotationalVelocity {
         get {
-            /*
-            OMV.Vector3 pv = OMV.Vector3.Zero;
-            // if close to zero, report zero
-            // This is copied from ODE but I'm not sure why it returns zero but doesn't
-            //    zero the property in the physics engine.
-            if (_rotationalVelocity.ApproxEquals(pv, 0.2f))
-                return pv;
-             */
-
             return _rotationalVelocity;
         }
         set {
@@ -856,7 +954,7 @@ public sealed class BSPrim : BSPhysObject
             PhysicsScene.TaintedObject("BSPrim.setRotationalVelocity", delegate()
             {
                 DetailLog("{0},BSPrim.SetRotationalVel,taint,rotvel={1}", LocalID, _rotationalVelocity);
-                BulletSimAPI.SetAngularVelocity2(PhysBody.ptr, _rotationalVelocity);
+                ForceRotationalVelocity = _rotationalVelocity;
             });
         }
     }
@@ -866,7 +964,11 @@ public sealed class BSPrim : BSPhysObject
         }
         set {
             _rotationalVelocity = value;
-            BulletSimAPI.SetAngularVelocity2(PhysBody.ptr, _rotationalVelocity);
+            if (PhysBody.HasPhysicalBody)
+            {
+                PhysicsScene.PE.SetAngularVelocity(PhysBody, _rotationalVelocity);
+                ActivateIfPhysical(false);
+            }
         }
     }
     public override bool Kinematic {
@@ -890,9 +992,10 @@ public sealed class BSPrim : BSPhysObject
         set {
             _buoyancy = value;
             // DetailLog("{0},BSPrim.setForceBuoyancy,taint,buoy={1}", LocalID, _buoyancy);
-            // Buoyancy is faked by changing the gravity applied to the object
-            float grav = PhysicsScene.Params.gravity * (1f - _buoyancy);
-            BulletSimAPI.SetGravity2(PhysBody.ptr, new OMV.Vector3(0f, 0f, grav));
+            // Force the recalculation of the various inertia,etc variables in the object
+            DetailLog("{0},BSPrim.ForceBuoyancy,buoy={1},mass={2}", LocalID, _buoyancy, _mass);
+            UpdatePhysicalMassProperties(_mass, true);
+            ActivateIfPhysical(false);
         }
     }
 
@@ -900,17 +1003,103 @@ public sealed class BSPrim : BSPhysObject
     public override OMV.Vector3 PIDTarget {
         set { _PIDTarget = value; }
     }
-    public override bool PIDActive {
-        set { _usePID = value; }
-    }
     public override float PIDTau {
         set { _PIDTau = value; }
     }
+    public override bool PIDActive {
+        set {
+            if (value)
+            {
+                // We're taking over after this.
+                ZeroMotion(true);
+
+                _targetMotor = new BSVMotor("BSPrim.PIDTarget",
+                                            _PIDTau,                    // timeScale
+                                            BSMotor.Infinite,           // decay time scale
+                                            BSMotor.InfiniteVector,     // friction timescale
+                                            1f                          // efficiency
+                );
+                _targetMotor.PhysicsScene = PhysicsScene; // DEBUG DEBUG so motor will output detail log messages.
+                _targetMotor.SetTarget(_PIDTarget);
+                _targetMotor.SetCurrent(RawPosition);
+                /*
+                _targetMotor = new BSPIDVMotor("BSPrim.PIDTarget");
+                _targetMotor.PhysicsScene = PhysicsScene; // DEBUG DEBUG so motor will output detail log messages.
+
+                _targetMotor.SetTarget(_PIDTarget);
+                _targetMotor.SetCurrent(RawPosition);
+                _targetMotor.TimeScale = _PIDTau;
+                _targetMotor.Efficiency = 1f;
+                 */
+
+                RegisterPreStepAction("BSPrim.PIDTarget", LocalID, delegate(float timeStep)
+                {
+                    OMV.Vector3 origPosition = RawPosition;     // DEBUG DEBUG (for printout below)
+
+                    // 'movePosition' is where we'd like the prim to be at this moment.
+                    OMV.Vector3 movePosition = _targetMotor.Step(timeStep);
+
+                    // If we are very close to our target, turn off the movement motor.
+                    if (_targetMotor.ErrorIsZero())
+                    {
+                        DetailLog("{0},BSPrim.PIDTarget,zeroMovement,movePos={1},pos={2},mass={3}",
+                                                LocalID, movePosition, RawPosition, Mass);
+                        ForcePosition = _targetMotor.TargetValue;
+                        _targetMotor.Enabled = false;
+                    }
+                    else
+                    {
+                        ForcePosition = movePosition;
+                    }
+                    DetailLog("{0},BSPrim.PIDTarget,move,fromPos={1},movePos={2}", LocalID, origPosition, movePosition);
+                });
+            }
+            else
+            {
+                // Stop any targetting
+                UnRegisterPreStepAction("BSPrim.PIDTarget", LocalID);
+            }
+        }
+    }
 
     // Used for llSetHoverHeight and maybe vehicle height
     // Hover Height will override MoveTo target's Z
     public override bool PIDHoverActive {
-        set { _useHoverPID = value; }
+        set {
+            if (value)
+            {
+                // Turning the target on
+                _hoverMotor = new BSFMotor("BSPrim.Hover",
+                                            _PIDHoverTau,               // timeScale
+                                            BSMotor.Infinite,           // decay time scale
+                                            BSMotor.Infinite,           // friction timescale
+                                            1f                          // efficiency
+                );
+                _hoverMotor.SetTarget(ComputeCurrentPIDHoverHeight());
+                _hoverMotor.SetCurrent(RawPosition.Z);
+                _hoverMotor.PhysicsScene = PhysicsScene; // DEBUG DEBUG so motor will output detail log messages.
+
+                RegisterPreStepAction("BSPrim.Hover", LocalID, delegate(float timeStep)
+                {
+                    _hoverMotor.SetCurrent(RawPosition.Z);
+                    _hoverMotor.SetTarget(ComputeCurrentPIDHoverHeight());
+                    float targetHeight = _hoverMotor.Step(timeStep);
+
+                    // 'targetHeight' is where we'd like the Z of the prim to be at this moment.
+                    // Compute the amount of force to push us there.
+                    float moveForce = (targetHeight - RawPosition.Z) * Mass;
+                    // Undo anything the object thinks it's doing at the moment
+                    moveForce = -RawVelocity.Z * Mass;
+
+                    PhysicsScene.PE.ApplyCentralImpulse(PhysBody, new OMV.Vector3(0f, 0f, moveForce));
+                    DetailLog("{0},BSPrim.Hover,move,targHt={1},moveForce={2},mass={3}", LocalID, targetHeight, moveForce, Mass);
+                });
+            }
+            else
+            {
+                UnRegisterPreStepAction("BSPrim.Hover", LocalID);
+            }
+        }
     }
     public override float PIDHoverHeight {
         set { _PIDHoverHeight = value; }
@@ -919,8 +1108,35 @@ public sealed class BSPrim : BSPhysObject
         set { _PIDHoverType = value; }
     }
     public override float PIDHoverTau {
-        set { _PIDHoverTao = value; }
+        set { _PIDHoverTau = value; }
     }
+    // Based on current position, determine what we should be hovering at now.
+    // Must recompute often. What if we walked offa cliff>
+    private float ComputeCurrentPIDHoverHeight()
+    {
+        float ret = _PIDHoverHeight;
+        float groundHeight = PhysicsScene.TerrainManager.GetTerrainHeightAtXYZ(RawPosition);
+
+        switch (_PIDHoverType)
+        {
+            case PIDHoverType.Ground:
+                ret = groundHeight + _PIDHoverHeight;
+                break;
+            case PIDHoverType.GroundAndWater:
+                float waterHeight = PhysicsScene.TerrainManager.GetWaterLevelAtXYZ(RawPosition);
+                if (groundHeight > waterHeight)
+                {
+                    ret = groundHeight + _PIDHoverHeight;
+                }
+                else
+                {
+                    ret = waterHeight + _PIDHoverHeight;
+                }
+                break;
+        }
+        return ret;
+    }
+
 
     // For RotLookAt
     public override OMV.Quaternion APIDTarget { set { return; } }
@@ -928,54 +1144,45 @@ public sealed class BSPrim : BSPhysObject
     public override float APIDStrength { set { return; } }
     public override float APIDDamping { set { return; } }
 
-    private List<OMV.Vector3> m_accumulatedForces = new List<OMV.Vector3>();
     public override void AddForce(OMV.Vector3 force, bool pushforce) {
-        AddForce(force, pushforce, false);
+        // Since this force is being applied in only one step, make this a force per second.
+        OMV.Vector3 addForce = force / PhysicsScene.LastTimeStep;
+        AddForce(addForce, pushforce, false);
     }
     // Applying a force just adds this to the total force on the object.
+    // This added force will only last the next simulation tick.
     public void AddForce(OMV.Vector3 force, bool pushforce, bool inTaintTime) {
         // for an object, doesn't matter if force is a pushforce or not
-        if (force.IsFinite())
+        if (!IsStatic && force.IsFinite())
         {
-            // _force += force;
-            lock (m_accumulatedForces)
-                m_accumulatedForces.Add(new OMV.Vector3(force));
+            float magnitude = force.Length();
+            if (magnitude > BSParam.MaxAddForceMagnitude)
+            {
+                // Force has a limit
+                force = force / magnitude * BSParam.MaxAddForceMagnitude;
+            }
+
+            OMV.Vector3 addForce = force;
+            // DetailLog("{0},BSPrim.addForce,call,force={1}", LocalID, addForce);
+
+            PhysicsScene.TaintedObject(inTaintTime, "BSPrim.AddForce", delegate()
+            {
+                // Bullet adds this central force to the total force for this tick
+                DetailLog("{0},BSPrim.addForce,taint,force={1}", LocalID, addForce);
+                if (PhysBody.HasPhysicalBody)
+                {
+                    PhysicsScene.PE.ApplyCentralForce(PhysBody, addForce);
+                    ActivateIfPhysical(false);
+                }
+            });
         }
         else
         {
             m_log.WarnFormat("{0}: Got a NaN force applied to a prim. LocalID={1}", LogHeader, LocalID);
             return;
         }
-        PhysicsScene.TaintedObject(inTaintTime, "BSPrim.AddForce", delegate()
-        {
-            OMV.Vector3 fSum = OMV.Vector3.Zero;
-            lock (m_accumulatedForces)
-            {
-                // Sum the accumulated additional forces for one big force to apply once.
-                foreach (OMV.Vector3 v in m_accumulatedForces)
-                {
-                    fSum += v;
-                }
-                m_accumulatedForces.Clear();
-            }
-            DetailLog("{0},BSPrim.AddForce,taint,force={1}", LocalID, fSum);
-            if (fSum != OMV.Vector3.Zero)
-                BulletSimAPI.ApplyCentralForce2(PhysBody.ptr, fSum);
-        });
     }
 
-    // An impulse force is scaled by the mass of the object.
-    public void ApplyForceImpulse(OMV.Vector3 impulse, bool inTaintTime)
-    {
-        OMV.Vector3 applyImpulse = impulse;
-        PhysicsScene.TaintedObject(inTaintTime, "BSPrim.ApplyForceImpulse", delegate()
-        {
-            DetailLog("{0},BSPrim.ApplyForceImpulse,taint,tImpulse={1}", LocalID, applyImpulse);
-            BulletSimAPI.ApplyCentralImpulse2(PhysBody.ptr, applyImpulse);
-        });
-    }
-
-    private List<OMV.Vector3> m_accumulatedAngularForces = new List<OMV.Vector3>();
     public override void AddAngularForce(OMV.Vector3 force, bool pushforce) {
         AddAngularForce(force, pushforce, false);
     }
@@ -983,42 +1190,37 @@ public sealed class BSPrim : BSPhysObject
     {
         if (force.IsFinite())
         {
-            // _force += force;
-            lock (m_accumulatedAngularForces)
-                m_accumulatedAngularForces.Add(new OMV.Vector3(force));
+            OMV.Vector3 angForce = force;
+            PhysicsScene.TaintedObject(inTaintTime, "BSPrim.AddAngularForce", delegate()
+            {
+                if (PhysBody.HasPhysicalBody)
+                {
+                    PhysicsScene.PE.ApplyTorque(PhysBody, angForce);
+                    ActivateIfPhysical(false);
+                }
+            });
         }
         else
         {
             m_log.WarnFormat("{0}: Got a NaN force applied to a prim. LocalID={1}", LogHeader, LocalID);
             return;
         }
-        PhysicsScene.TaintedObject(inTaintTime, "BSPrim.AddAngularForce", delegate()
-        {
-            OMV.Vector3 fSum = OMV.Vector3.Zero;
-            lock (m_accumulatedAngularForces)
-            {
-                // Sum the accumulated additional forces for one big force to apply once.
-                foreach (OMV.Vector3 v in m_accumulatedAngularForces)
-                {
-                    fSum += v;
-                }
-                m_accumulatedAngularForces.Clear();
-            }
-            DetailLog("{0},BSPrim.AddAngularForce,taint,aForce={1}", LocalID, fSum);
-            if (fSum != OMV.Vector3.Zero)
-            {
-                BulletSimAPI.ApplyTorque2(PhysBody.ptr, fSum);
-                _torque = fSum;
-            }
-        });
     }
+
     // A torque impulse.
+    // ApplyTorqueImpulse adds torque directly to the angularVelocity.
+    // AddAngularForce accumulates the force and applied it to the angular velocity all at once.
+    // Computed as: angularVelocity += impulse * inertia;
     public void ApplyTorqueImpulse(OMV.Vector3 impulse, bool inTaintTime)
     {
         OMV.Vector3 applyImpulse = impulse;
         PhysicsScene.TaintedObject(inTaintTime, "BSPrim.ApplyTorqueImpulse", delegate()
         {
-            BulletSimAPI.ApplyTorqueImpulse2(PhysBody.ptr, applyImpulse);
+            if (PhysBody.HasPhysicalBody)
+            {
+                PhysicsScene.PE.ApplyTorqueImpulse(PhysBody, applyImpulse);
+                ActivateIfPhysical(false);
+            }
         });
     }
 
@@ -1313,11 +1515,7 @@ public sealed class BSPrim : BSPhysObject
         }
          */
 
-        if (returnMass <= 0)
-            returnMass = 0.0001f;
-
-        if (returnMass > PhysicsScene.MaximumObjectMass)
-            returnMass = PhysicsScene.MaximumObjectMass;
+        returnMass = Util.Clamp(returnMass, BSParam.MinimumObjectMass, BSParam.MaximumObjectMass);
 
         return returnMass;
     }// end CalculateMass
@@ -1326,7 +1524,7 @@ public sealed class BSPrim : BSPhysObject
     // Rebuild the geometry and object.
     // This is called when the shape changes so we need to recreate the mesh/hull.
     // Called at taint-time!!!
-    private void CreateGeomAndObject(bool forceRebuild)
+    public void CreateGeomAndObject(bool forceRebuild)
     {
         // If this prim is part of a linkset, we must remove and restore the physical
         //    links if the body is rebuilt.
@@ -1336,12 +1534,11 @@ public sealed class BSPrim : BSPhysObject
         // Create the correct physical representation for this type of object.
         // Updates PhysBody and PhysShape with the new information.
         // Ignore 'forceRebuild'. This routine makes the right choices and changes of necessary.
-        // Returns 'true' if either the body or the shape was changed.
         PhysicsScene.Shapes.GetBodyAndShape(false, PhysicsScene.World, this, null, delegate(BulletBody dBody)
         {
             // Called if the current prim body is about to be destroyed.
             // Remove all the physical dependencies on the old body.
-            // (Maybe someday make the changing of BSShape an event handled by BSLinkset.)
+            // (Maybe someday make the changing of BSShape an event to be subscribed to by BSLinkset, ...)
             needToRestoreLinkset = Linkset.RemoveBodyDependencies(this);
             needToRestoreVehicle = _vehicle.RemoveBodyDependencies(this);
         });
@@ -1381,54 +1578,16 @@ public sealed class BSPrim : BSPhysObject
 
     public override void UpdateProperties(EntityProperties entprop)
     {
-        /*
-        UpdatedProperties changed = 0;
-        // assign to the local variables so the normal set action does not happen
-        // if (_position != entprop.Position)
-        if (!_position.ApproxEquals(entprop.Position, POSITION_TOLERANCE))
-        {
-            _position = entprop.Position;
-            changed |= UpdatedProperties.Position;
-        }
-        // if (_orientation != entprop.Rotation)
-        if (!_orientation.ApproxEquals(entprop.Rotation, ROTATION_TOLERANCE))
-        {
-            _orientation = entprop.Rotation;
-            changed |= UpdatedProperties.Rotation;
-        }
-        // if (_velocity != entprop.Velocity)
-        if (!_velocity.ApproxEquals(entprop.Velocity, VELOCITY_TOLERANCE))
-        {
-            _velocity = entprop.Velocity;
-            changed |= UpdatedProperties.Velocity;
-        }
-        // if (_acceleration != entprop.Acceleration)
-        if (!_acceleration.ApproxEquals(entprop.Acceleration, ACCELERATION_TOLERANCE))
-        {
-            _acceleration = entprop.Acceleration;
-            changed |= UpdatedProperties.Acceleration;
-        }
-        // if (_rotationalVelocity != entprop.RotationalVelocity)
-        if (!_rotationalVelocity.ApproxEquals(entprop.RotationalVelocity, ROTATIONAL_VELOCITY_TOLERANCE))
-        {
-            _rotationalVelocity = entprop.RotationalVelocity;
-            changed |= UpdatedProperties.RotationalVel;
-        }
-        if (changed != 0)
+        // Updates only for individual prims and for the root object of a linkset.
+        if (Linkset.IsRoot(this))
         {
-            // Only update the position of single objects and linkset roots
-            if (Linkset.IsRoot(this))
+            // A temporary kludge to suppress the rotational effects introduced on vehicles by Bullet
+            // TODO: handle physics introduced by Bullet with computed vehicle physics.
+            if (_vehicle.IsActive)
             {
-                base.RequestPhysicsterseUpdate();
+                entprop.RotationalVelocity = OMV.Vector3.Zero;
             }
-        }
-        */
-
-        // Don't check for damping here -- it's done in BulletSim and SceneObjectPart.
 
-        // Updates only for individual prims and for the root object of a linkset.
-        if (Linkset.IsRoot(this))
-        {
             // Assign directly to the local variables so the normal set action does not happen
             _position = entprop.Position;
             _orientation = entprop.Rotation;
@@ -1437,21 +1596,19 @@ public sealed class BSPrim : BSPhysObject
             _rotationalVelocity = entprop.RotationalVelocity;
 
             // The sanity check can change the velocity and/or position.
-            if (PositionSanityCheck(true))
+            if (IsPhysical && PositionSanityCheck(true))
             {
                 entprop.Position = _position;
                 entprop.Velocity = _velocity;
             }
 
-            // remember the current and last set values
-            LastEntityProperties = CurrentEntityProperties;
-            CurrentEntityProperties = entprop;
-
-            OMV.Vector3 direction = OMV.Vector3.UnitX * _orientation;
+            OMV.Vector3 direction = OMV.Vector3.UnitX * _orientation;   // DEBUG DEBUG DEBUG
             DetailLog("{0},BSPrim.UpdateProperties,call,pos={1},orient={2},dir={3},vel={4},rotVel={5}",
                     LocalID, _position, _orientation, direction, _velocity, _rotationalVelocity);
 
-            // BulletSimAPI.DumpRigidBody2(PhysicsScene.World.ptr, BSBody.ptr);   // DEBUG DEBUG DEBUG
+            // remember the current and last set values
+            LastEntityProperties = CurrentEntityProperties;
+            CurrentEntityProperties = entprop;
 
             base.RequestPhysicsterseUpdate();
         }
@@ -1466,7 +1623,7 @@ public sealed class BSPrim : BSPhysObject
              */
 
         // The linkset implimentation might want to know about this.
-        Linkset.UpdateProperties(this);
+        Linkset.UpdateProperties(this, true);
     }
 }
 }
diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSScene.cs b/OpenSim/Region/Physics/BulletSPlugin/BSScene.cs
index 27a78d1..7017194 100644
--- a/OpenSim/Region/Physics/BulletSPlugin/BSScene.cs
+++ b/OpenSim/Region/Physics/BulletSPlugin/BSScene.cs
@@ -26,6 +26,7 @@
  */
 using System;
 using System.Collections.Generic;
+using System.Reflection;
 using System.Runtime.InteropServices;
 using System.Text;
 using System.Threading;
@@ -38,40 +39,22 @@ using Nini.Config;
 using log4net;
 using OpenMetaverse;
 
-// TODOs for BulletSim (for BSScene, BSPrim, BSCharacter and BulletSim)
-// Test sculpties (verified that they don't work)
-// Compute physics FPS reasonably
-// Based on material, set density and friction
-// Don't use constraints in linksets of non-physical objects. Means having to move children manually.
-// Four states of prim: Physical, regular, phantom and selected. Are we modeling these correctly?
-//     In SL one can set both physical and phantom (gravity, does not effect others, makes collisions with ground)
-//     At the moment, physical and phantom causes object to drop through the terrain
-// Physical phantom objects and related typing (collision options )
-// Check out llVolumeDetect. Must do something for that.
-// Use collision masks for collision with terrain and phantom objects
-// More efficient memory usage when passing hull information from BSPrim to BulletSim
-// Should prim.link() and prim.delink() membership checking happen at taint time?
-// Mesh sharing. Use meshHash to tell if we already have a hull of that shape and only create once.
-// Do attachments need to be handled separately? Need collision events. Do not collide with VolumeDetect
-// Implement LockAngularMotion
-// Decide if clearing forces is the right thing to do when setting position (BulletSim::SetObjectTranslation)
-// Remove mesh and Hull stuff. Use mesh passed to bullet and use convexdecom from bullet.
-// Add PID movement operations. What does ScenePresence.MoveToTarget do?
-// Check terrain size. 128 or 127?
-// Raycast
-//
 namespace OpenSim.Region.Physics.BulletSPlugin
 {
 public sealed class BSScene : PhysicsScene, IPhysicsParameters
 {
-    private static readonly ILog m_log = LogManager.GetLogger(System.Reflection.MethodBase.GetCurrentMethod().DeclaringType);
-    private static readonly string LogHeader = "[BULLETS SCENE]";
+    internal static readonly ILog m_log = LogManager.GetLogger(System.Reflection.MethodBase.GetCurrentMethod().DeclaringType);
+    internal static readonly string LogHeader = "[BULLETS SCENE]";
 
     // The name of the region we're working for.
     public string RegionName { get; private set; }
 
     public string BulletSimVersion = "?";
 
+    // The handle to the underlying managed or unmanaged version of Bullet being used.
+    public string BulletEngineName { get; private set; }
+    public BSAPITemplate PE;
+
     public Dictionary<uint, BSPhysObject> PhysObjects;
     public BSShapeCollection Shapes;
 
@@ -82,32 +65,30 @@ public sealed class BSScene : PhysicsScene, IPhysicsParameters
     //    every tick so OpenSim will update its animation.
     private HashSet<BSPhysObject> m_avatars = new HashSet<BSPhysObject>();
 
-    // List of all the objects that have vehicle properties and should be called
-    //    to update each physics step.
-    private List<BSPhysObject> m_vehicles = new List<BSPhysObject>();
-
     // let my minuions use my logger
     public ILog Logger { get { return m_log; } }
 
     public IMesher mesher;
-    // Level of Detail values kept as float because that's what the Meshmerizer wants
-    public float MeshLOD { get; private set; }
-    public float MeshMegaPrimLOD { get; private set; }
-    public float MeshMegaPrimThreshold { get; private set; }
-    public float SculptLOD { get; private set; }
-
     public uint WorldID { get; private set; }
-    public BulletSim World { get; private set; }
+    public BulletWorld World { get; private set; }
 
     // All the constraints that have been allocated in this instance.
     public BSConstraintCollection Constraints { get; private set; }
 
     // Simulation parameters
-    private int m_maxSubSteps;
-    private float m_fixedTimeStep;
-    private long m_simulationStep = 0;
+    internal int m_maxSubSteps;
+    internal float m_fixedTimeStep;
+    internal long m_simulationStep = 0;
+    internal float NominalFrameRate { get; set; }
     public long SimulationStep { get { return m_simulationStep; } }
-    private int m_taintsToProcessPerStep;
+    internal int m_taintsToProcessPerStep;
+    internal float LastTimeStep { get; private set; }
+
+    // Physical objects can register for prestep or poststep events
+    public delegate void PreStepAction(float timeStep);
+    public delegate void PostStepAction(float timeStep);
+    public event PreStepAction BeforeStep;
+    public event PreStepAction AfterStep;
 
     // A value of the time now so all the collision and update routines do not have to get their own
     // Set to 'now' just before all the prims and actors are called for collisions and updates
@@ -121,31 +102,22 @@ public sealed class BSScene : PhysicsScene, IPhysicsParameters
     public bool InTaintTime { get; private set; }
 
     // Pinned memory used to pass step information between managed and unmanaged
-    private int m_maxCollisionsPerFrame;
-    private CollisionDesc[] m_collisionArray;
-    private GCHandle m_collisionArrayPinnedHandle;
+    internal int m_maxCollisionsPerFrame;
+    internal CollisionDesc[] m_collisionArray;
 
-    private int m_maxUpdatesPerFrame;
-    private EntityProperties[] m_updateArray;
-    private GCHandle m_updateArrayPinnedHandle;
-
-    public bool ShouldMeshSculptedPrim { get; private set; }   // cause scuplted prims to get meshed
-    public bool ShouldForceSimplePrimMeshing { get; private set; }   // if a cube or sphere, let Bullet do internal shapes
-    public bool ShouldUseHullsForPhysicalObjects { get; private set; }   // 'true' if should create hulls for physical objects
-
-    public float PID_D { get; private set; }    // derivative
-    public float PID_P { get; private set; }    // proportional
+    internal int m_maxUpdatesPerFrame;
+    internal EntityProperties[] m_updateArray;
 
     public const uint TERRAIN_ID = 0;       // OpenSim senses terrain with a localID of zero
     public const uint GROUNDPLANE_ID = 1;
     public const uint CHILDTERRAIN_ID = 2;  // Terrain allocated based on our mega-prim childre start here
 
-    private float m_waterLevel;
+    public float SimpleWaterLevel { get; set; }
     public BSTerrainManager TerrainManager { get; private set; }
 
     public ConfigurationParameters Params
     {
-        get { return m_params[0]; }
+        get { return UnmanagedParams[0]; }
     }
     public Vector3 DefaultGravity
     {
@@ -157,8 +129,6 @@ public sealed class BSScene : PhysicsScene, IPhysicsParameters
         get { return Params.gravity; }
     }
 
-    public float MaximumObjectMass { get; private set; }
-
     // When functions in the unmanaged code must be called, it is only
     //   done at a known time just before the simulation step. The taint
     //   system saves all these function calls and executes them in
@@ -181,13 +151,7 @@ public sealed class BSScene : PhysicsScene, IPhysicsParameters
 
     // A pointer to an instance if this structure is passed to the C++ code
     // Used to pass basic configuration values to the unmanaged code.
-    ConfigurationParameters[] m_params;
-    GCHandle m_paramsHandle;
-
-    // Handle to the callback used by the unmanaged code to call into the managed code.
-    // Used for debug logging.
-    // Need to store the handle in a persistant variable so it won't be freed.
-    private BulletSimAPI.DebugLogCallback m_DebugLogCallbackHandle;
+    internal ConfigurationParameters[] UnmanagedParams;
 
     // Sometimes you just have to log everything.
     public Logging.LogWriter PhysicsLogging;
@@ -195,8 +159,12 @@ public sealed class BSScene : PhysicsScene, IPhysicsParameters
     private string m_physicsLoggingDir;
     private string m_physicsLoggingPrefix;
     private int m_physicsLoggingFileMinutes;
+    private bool m_physicsLoggingDoFlush;
+    private bool m_physicsPhysicalDumpEnabled;
+    public float PhysicsMetricDumpFrames { get; set; }
     // 'true' of the vehicle code is to log lots of details
     public bool VehicleLoggingEnabled { get; private set; }
+    public bool VehiclePhysicalLoggingEnabled { get; private set; }
 
     #region Construction and Initialization
     public BSScene(string identifier)
@@ -216,17 +184,13 @@ public sealed class BSScene : PhysicsScene, IPhysicsParameters
         Shapes = new BSShapeCollection(this);
 
         // Allocate pinned memory to pass parameters.
-        m_params = new ConfigurationParameters[1];
-        m_paramsHandle = GCHandle.Alloc(m_params, GCHandleType.Pinned);
+        UnmanagedParams = new ConfigurationParameters[1];
 
         // Set default values for physics parameters plus any overrides from the ini file
         GetInitialParameterValues(config);
 
-        // allocate more pinned memory close to the above in an attempt to get the memory all together
-        m_collisionArray = new CollisionDesc[m_maxCollisionsPerFrame];
-        m_collisionArrayPinnedHandle = GCHandle.Alloc(m_collisionArray, GCHandleType.Pinned);
-        m_updateArray = new EntityProperties[m_maxUpdatesPerFrame];
-        m_updateArrayPinnedHandle = GCHandle.Alloc(m_updateArray, GCHandleType.Pinned);
+        // Get the connection to the physics engine (could be native or one of many DLLs)
+        PE = SelectUnderlyingBulletEngine(BulletEngineName);
 
         // Enable very detailed logging.
         // By creating an empty logger when not logging, the log message invocation code
@@ -234,28 +198,16 @@ public sealed class BSScene : PhysicsScene, IPhysicsParameters
         if (m_physicsLoggingEnabled)
         {
             PhysicsLogging = new Logging.LogWriter(m_physicsLoggingDir, m_physicsLoggingPrefix, m_physicsLoggingFileMinutes);
+            PhysicsLogging.ErrorLogger = m_log; // for DEBUG. Let's the logger output error messages.
         }
         else
         {
             PhysicsLogging = new Logging.LogWriter();
         }
 
-        // If Debug logging level, enable logging from the unmanaged code
-        m_DebugLogCallbackHandle = null;
-        if (m_log.IsDebugEnabled || PhysicsLogging.Enabled)
-        {
-            m_log.DebugFormat("{0}: Initialize: Setting debug callback for unmanaged code", LogHeader);
-            if (PhysicsLogging.Enabled)
-                // The handle is saved in a variable to make sure it doesn't get freed after this call
-                m_DebugLogCallbackHandle = new BulletSimAPI.DebugLogCallback(BulletLoggerPhysLog);
-            else
-                m_DebugLogCallbackHandle = new BulletSimAPI.DebugLogCallback(BulletLogger);
-        }
-
-        // Get the version of the DLL
-        // TODO: this doesn't work yet. Something wrong with marshaling the returned string.
-        // BulletSimVersion = BulletSimAPI.GetVersion();
-        // m_log.WarnFormat("{0}: BulletSim.dll version='{1}'", LogHeader, BulletSimVersion);
+        // Allocate memory for returning of the updates and collisions from the physics engine
+        m_collisionArray = new CollisionDesc[m_maxCollisionsPerFrame];
+        m_updateArray = new EntityProperties[m_maxUpdatesPerFrame];
 
         // The bounding box for the simulated world. The origin is 0,0,0 unless we're
         //    a child in a mega-region.
@@ -263,18 +215,14 @@ public sealed class BSScene : PhysicsScene, IPhysicsParameters
         //    area. It tracks active objects no matter where they are.
         Vector3 worldExtent = new Vector3(Constants.RegionSize, Constants.RegionSize, Constants.RegionHeight);
 
-        // m_log.DebugFormat("{0}: Initialize: Calling BulletSimAPI.Initialize.", LogHeader);
-        World = new BulletSim(0, this, BulletSimAPI.Initialize2(worldExtent, m_paramsHandle.AddrOfPinnedObject(),
-                                        m_maxCollisionsPerFrame, m_collisionArrayPinnedHandle.AddrOfPinnedObject(),
-                                        m_maxUpdatesPerFrame, m_updateArrayPinnedHandle.AddrOfPinnedObject(),
-                                        m_DebugLogCallbackHandle));
+        World = PE.Initialize(worldExtent, Params, m_maxCollisionsPerFrame, ref m_collisionArray, m_maxUpdatesPerFrame, ref m_updateArray);
 
         Constraints = new BSConstraintCollection(World);
 
         TerrainManager = new BSTerrainManager(this);
         TerrainManager.CreateInitialGroundPlaneAndTerrain();
 
-        m_log.WarnFormat("{0} Linksets implemented with {1}", LogHeader, (BSLinkset.LinksetImplementation)Params.linksetImplementation);
+        m_log.WarnFormat("{0} Linksets implemented with {1}", LogHeader, (BSLinkset.LinksetImplementation)BSParam.LinksetImplementation);
 
         InTaintTime = false;
         m_initialized = true;
@@ -285,9 +233,9 @@ public sealed class BSScene : PhysicsScene, IPhysicsParameters
     private void GetInitialParameterValues(IConfigSource config)
     {
         ConfigurationParameters parms = new ConfigurationParameters();
-        m_params[0] = parms;
+        UnmanagedParams[0] = parms;
 
-        SetParameterDefaultValues();
+        BSParam.SetParameterDefaultValues(this);
 
         if (config != null)
         {
@@ -295,19 +243,34 @@ public sealed class BSScene : PhysicsScene, IPhysicsParameters
             IConfig pConfig = config.Configs["BulletSim"];
             if (pConfig != null)
             {
-                SetParameterConfigurationValues(pConfig);
+                BSParam.SetParameterConfigurationValues(this, pConfig);
+
+                // There are two Bullet implementations to choose from
+                BulletEngineName = pConfig.GetString("BulletEngine", "BulletUnmanaged");
 
                 // Very detailed logging for physics debugging
+                // TODO: the boolean values can be moved to the normal parameter processing.
                 m_physicsLoggingEnabled = pConfig.GetBoolean("PhysicsLoggingEnabled", false);
                 m_physicsLoggingDir = pConfig.GetString("PhysicsLoggingDir", ".");
                 m_physicsLoggingPrefix = pConfig.GetString("PhysicsLoggingPrefix", "physics-%REGIONNAME%-");
                 m_physicsLoggingFileMinutes = pConfig.GetInt("PhysicsLoggingFileMinutes", 5);
+                m_physicsLoggingDoFlush = pConfig.GetBoolean("PhysicsLoggingDoFlush", false);
+                m_physicsPhysicalDumpEnabled = pConfig.GetBoolean("PhysicsPhysicalDumpEnabled", false);
                 // Very detailed logging for vehicle debugging
                 VehicleLoggingEnabled = pConfig.GetBoolean("VehicleLoggingEnabled", false);
+                VehiclePhysicalLoggingEnabled = pConfig.GetBoolean("VehiclePhysicalLoggingEnabled", false);
 
                 // Do any replacements in the parameters
                 m_physicsLoggingPrefix = m_physicsLoggingPrefix.Replace("%REGIONNAME%", RegionName);
             }
+
+            // The material characteristics.
+            BSMaterials.InitializeFromDefaults(Params);
+            if (pConfig != null)
+            {
+                // Let the user add new and interesting material property values.
+                BSMaterials.InitializefromParameters(pConfig);
+            }
         }
     }
 
@@ -326,16 +289,41 @@ public sealed class BSScene : PhysicsScene, IPhysicsParameters
         return ret;
     }
 
-    // Called directly from unmanaged code so don't do much
-    private void BulletLogger(string msg)
+    // Select the connection to the actual Bullet implementation.
+    // The main engine selection is the engineName up to the first hypen.
+    // So "Bullet-2.80-OpenCL-Intel" specifies the 'bullet' class here and the whole name
+    //     is passed to the engine to do its special selection, etc.
+    private BSAPITemplate SelectUnderlyingBulletEngine(string engineName)
     {
-        m_log.Debug("[BULLETS UNMANAGED]:" + msg);
-    }
+        // For the moment, do a simple switch statement.
+        // Someday do fancyness with looking up the interfaces in the assembly.
+        BSAPITemplate ret = null;
 
-    // Called directly from unmanaged code so don't do much
-    private void BulletLoggerPhysLog(string msg)
-    {
-        DetailLog("[BULLETS UNMANAGED]:" + msg);
+        string selectionName = engineName.ToLower();
+        int hyphenIndex = engineName.IndexOf("-");
+        if (hyphenIndex > 0)
+            selectionName = engineName.ToLower().Substring(0, hyphenIndex - 1);
+
+        switch (selectionName)
+        {
+            case "bulletunmanaged":
+                ret = new BSAPIUnman(engineName, this);
+                break;
+            case "bulletxna":
+                ret = new BSAPIXNA(engineName, this);
+                break;
+        }
+
+        if (ret == null)
+        {
+            m_log.ErrorFormat("{0) COULD NOT SELECT BULLET ENGINE: '[BulletSim]PhysicsEngine' must be either 'BulletUnmanaged-*' or 'BulletXNA-*'", LogHeader);
+        }
+        else
+        {
+            m_log.WarnFormat("{0} Selected bullet engine {1} -> {2}/{3}", LogHeader, engineName, ret.BulletEngineName, ret.BulletEngineVersion);
+        }
+
+        return ret;
     }
 
     public override void Dispose()
@@ -345,8 +333,6 @@ public sealed class BSScene : PhysicsScene, IPhysicsParameters
         // make sure no stepping happens while we're deleting stuff
         m_initialized = false;
 
-        TerrainManager.ReleaseGroundPlaneAndTerrain();
-
         foreach (KeyValuePair<uint, BSPhysObject> kvp in PhysObjects)
         {
             kvp.Value.Destroy();
@@ -366,8 +352,15 @@ public sealed class BSScene : PhysicsScene, IPhysicsParameters
             Shapes = null;
         }
 
+        if (TerrainManager != null)
+        {
+            TerrainManager.ReleaseGroundPlaneAndTerrain();
+            TerrainManager.Dispose();
+            TerrainManager = null;
+        }
+
         // Anything left in the unmanaged code should be cleaned out
-        BulletSimAPI.Shutdown2(World.ptr);
+        PE.Shutdown(World);
 
         // Not logging any more
         PhysicsLogging.Close();
@@ -474,41 +467,55 @@ public sealed class BSScene : PhysicsScene, IPhysicsParameters
     // Simulate one timestep
     public override float Simulate(float timeStep)
     {
+        // prevent simulation until we've been initialized
+        if (!m_initialized) return 5.0f;
+
+        LastTimeStep = timeStep;
+
         int updatedEntityCount = 0;
-        IntPtr updatedEntitiesPtr;
         int collidersCount = 0;
-        IntPtr collidersPtr;
 
         int beforeTime = 0;
         int simTime = 0;
 
-        // prevent simulation until we've been initialized
-        if (!m_initialized) return 5.0f;
-
         // update the prim states while we know the physics engine is not busy
         int numTaints = _taintOperations.Count;
+
+        InTaintTime = true; // Only used for debugging so locking is not necessary.
+
+        ProcessTaints();
+
+        // Some of the physical objects requre individual, pre-step calls
+        TriggerPreStepEvent(timeStep);
+
+        // the prestep actions might have added taints
+        numTaints += _taintOperations.Count;
         ProcessTaints();
 
-        // Some of the prims operate with special vehicle properties
-        ProcessVehicles(timeStep);
-        ProcessTaints();    // the vehicles might have added taints
+        InTaintTime = false; // Only used for debugging so locking is not necessary.
+
+        // The following causes the unmanaged code to output ALL the values found in ALL the objects in the world.
+        // Only enable this in a limited test world with few objects.
+        if (m_physicsPhysicalDumpEnabled)
+            PE.DumpAllInfo(World);
 
         // step the physical world one interval
         m_simulationStep++;
         int numSubSteps = 0;
-
         try
         {
-            if (VehicleLoggingEnabled) DumpVehicles();  // DEBUG
-            if (PhysicsLogging.Enabled) beforeTime = Util.EnvironmentTickCount();
+            if (PhysicsLogging.Enabled)
+                beforeTime = Util.EnvironmentTickCount();
 
-            numSubSteps = BulletSimAPI.PhysicsStep2(World.ptr, timeStep, m_maxSubSteps, m_fixedTimeStep,
-                        out updatedEntityCount, out updatedEntitiesPtr, out collidersCount, out collidersPtr);
+            numSubSteps = PE.PhysicsStep(World, timeStep, m_maxSubSteps, m_fixedTimeStep, out updatedEntityCount, out collidersCount);
 
-            if (PhysicsLogging.Enabled) simTime = Util.EnvironmentTickCountSubtract(beforeTime);
-            DetailLog("{0},Simulate,call, frame={1}, nTaints={2}, simTime={3}, substeps={4}, updates={5}, colliders={6}",
-                        DetailLogZero, m_simulationStep, numTaints, simTime, numSubSteps, updatedEntityCount, collidersCount);
-            if (VehicleLoggingEnabled) DumpVehicles();  // DEBUG
+            if (PhysicsLogging.Enabled)
+            {
+                simTime = Util.EnvironmentTickCountSubtract(beforeTime);
+                DetailLog("{0},Simulate,call, frame={1}, nTaints={2}, simTime={3}, substeps={4}, updates={5}, colliders={6}, objWColl={7}",
+                                        DetailLogZero, m_simulationStep, numTaints, simTime, numSubSteps,
+                                        updatedEntityCount, collidersCount, ObjectsWithCollisions.Count);
+            }
         }
         catch (Exception e)
         {
@@ -520,9 +527,10 @@ public sealed class BSScene : PhysicsScene, IPhysicsParameters
             collidersCount = 0;
         }
 
-        // Don't have to use the pointers passed back since we know it is the same pinned memory we passed in
+        if ((m_simulationStep % PhysicsMetricDumpFrames) == 0)
+            PE.DumpPhysicsStatistics(World);
 
-        // Get a value for 'now' so all the collision and update routines don't have to get their own
+        // Get a value for 'now' so all the collision and update routines don't have to get their own.
         SimulationNowTime = Util.EnvironmentTickCount();
 
         // If there were collisions, process them by sending the event to the prim.
@@ -562,12 +570,16 @@ public sealed class BSScene : PhysicsScene, IPhysicsParameters
 
         // Objects that are done colliding are removed from the ObjectsWithCollisions list.
         // Not done above because it is inside an iteration of ObjectWithCollisions.
+        // This complex collision processing is required to create an empty collision
+        //     event call after all real collisions have happened on an object. This enables
+        //     the simulator to generate the 'collision end' event.
         if (ObjectsWithNoMoreCollisions.Count > 0)
         {
             foreach (BSPhysObject po in ObjectsWithNoMoreCollisions)
                 ObjectsWithCollisions.Remove(po);
             ObjectsWithNoMoreCollisions.Clear();
         }
+        // Done with collisions.
 
         // If any of the objects had updated properties, tell the object it has been changed by the physics engine
         if (updatedEntityCount > 0)
@@ -583,17 +595,17 @@ public sealed class BSScene : PhysicsScene, IPhysicsParameters
             }
         }
 
-        ProcessPostStepTaints();
+        TriggerPostStepEvent(timeStep);
 
-        // This causes the unmanaged code to output ALL the values found in ALL the objects in the world.
+        // The following causes the unmanaged code to output ALL the values found in ALL the objects in the world.
         // Only enable this in a limited test world with few objects.
-        // BulletSimAPI.DumpAllInfo2(World.ptr);    // DEBUG DEBUG DEBUG
+        if (m_physicsPhysicalDumpEnabled)
+            PE.DumpAllInfo(World);
 
         // The physics engine returns the number of milliseconds it simulated this call.
         // These are summed and normalized to one second and divided by 1000 to give the reported physics FPS.
-        // We multiply by 55 to give a recognizable running rate (55 or less).
-        return numSubSteps * m_fixedTimeStep * 1000 * 55;
-        // return timeStep * 1000 * 55;
+        // Multiply by a fixed nominal frame rate to give a rate similar to the simulator (usually 55).
+        return (float)numSubSteps * m_fixedTimeStep * 1000f * NominalFrameRate;
     }
 
     // Something has collided
@@ -639,12 +651,7 @@ public sealed class BSScene : PhysicsScene, IPhysicsParameters
 
     public override void SetWaterLevel(float baseheight)
     {
-        m_waterLevel = baseheight;
-    }
-    // Someday....
-    public float GetWaterLevelAtXYZ(Vector3 loc)
-    {
-        return m_waterLevel;
+        SimpleWaterLevel = baseheight;
     }
 
     public override void DeleteTerrain()
@@ -681,6 +688,15 @@ public sealed class BSScene : PhysicsScene, IPhysicsParameters
     public override bool IsThreaded { get { return false;  } }
 
     #region Taints
+    // The simulation execution order is:
+    // Simulate()
+    //    DoOneTimeTaints
+    //    TriggerPreStepEvent
+    //    DoOneTimeTaints
+    //    Step()
+    //       ProcessAndForwardCollisions
+    //       ProcessAndForwardPropertyUpdates
+    //    TriggerPostStepEvent
 
     // Calls to the PhysicsActors can't directly call into the physics engine
     //       because it might be busy. We delay changes to a known time.
@@ -707,58 +723,35 @@ public sealed class BSScene : PhysicsScene, IPhysicsParameters
             TaintedObject(ident, callback);
     }
 
+    private void TriggerPreStepEvent(float timeStep)
+    {
+        PreStepAction actions = BeforeStep;
+        if (actions != null)
+            actions(timeStep);
+
+    }
+
+    private void TriggerPostStepEvent(float timeStep)
+    {
+        PreStepAction actions = AfterStep;
+        if (actions != null)
+            actions(timeStep);
+
+    }
+
     // When someone tries to change a property on a BSPrim or BSCharacter, the object queues
     // a callback into itself to do the actual property change. That callback is called
     // here just before the physics engine is called to step the simulation.
     public void ProcessTaints()
     {
-        InTaintTime = true; // Only used for debugging so locking is not necessary.
         ProcessRegularTaints();
         ProcessPostTaintTaints();
-        InTaintTime = false;
     }
 
     private void ProcessRegularTaints()
     {
         if (_taintOperations.Count > 0)  // save allocating new list if there is nothing to process
         {
-            /*
-            // Code to limit the number of taints processed per step. Meant to limit step time.
-            // Unsure if a good idea as code assumes that taints are done before the step.
-            int taintCount = m_taintsToProcessPerStep;
-            TaintCallbackEntry oneCallback = new TaintCallbackEntry();
-            while (_taintOperations.Count > 0 && taintCount-- > 0)
-            {
-                bool gotOne = false;
-                lock (_taintLock)
-                {
-                    if (_taintOperations.Count > 0)
-                    {
-                        oneCallback = _taintOperations[0];
-                        _taintOperations.RemoveAt(0);
-                        gotOne = true;
-                    }
-                }
-                if (gotOne)
-                {
-                    try
-                    {
-                        DetailLog("{0},BSScene.ProcessTaints,doTaint,id={1}", DetailLogZero, oneCallback.ident);
-                        oneCallback.callback();
-                    }
-                    catch (Exception e)
-                    {
-                        DetailLog("{0},BSScene.ProcessTaints,doTaintException,id={1}", DetailLogZero, oneCallback.ident); // DEBUG DEBUG DEBUG
-                        m_log.ErrorFormat("{0}: ProcessTaints: {1}: Exception: {2}", LogHeader, oneCallback.ident, e);
-                    }
-                }
-            }
-            if (_taintOperations.Count > 0)
-            {
-                DetailLog("{0},BSScene.ProcessTaints,leftTaintsOnList,numNotProcessed={1}", DetailLogZero, _taintOperations.Count);
-            }
-             */
-
             // swizzle a new list into the list location so we can process what's there
             List<TaintCallbackEntry> oldList;
             lock (_taintLock)
@@ -797,6 +790,7 @@ public sealed class BSScene : PhysicsScene, IPhysicsParameters
         return;
     }
 
+    // Taints that happen after the normal taint processing but before the simulation step.
     private void ProcessPostTaintTaints()
     {
         if (_postTaintOperations.Count > 0)
@@ -824,45 +818,6 @@ public sealed class BSScene : PhysicsScene, IPhysicsParameters
         }
     }
 
-    public void PostStepTaintObject(String ident, TaintCallback callback)
-    {
-        if (!m_initialized) return;
-
-        lock (_taintLock)
-        {
-            _postStepOperations.Add(new TaintCallbackEntry(ident, callback));
-        }
-
-        return;
-    }
-
-    private void ProcessPostStepTaints()
-    {
-        if (_postStepOperations.Count > 0)
-        {
-            List<TaintCallbackEntry> oldList;
-            lock (_taintLock)
-            {
-                oldList = _postStepOperations;
-                _postStepOperations = new List<TaintCallbackEntry>();
-            }
-
-            foreach (TaintCallbackEntry tcbe in oldList)
-            {
-                try
-                {
-                    DetailLog("{0},BSScene.ProcessPostStepTaints,doTaint,id={1}", DetailLogZero, tcbe.ident); // DEBUG DEBUG DEBUG
-                    tcbe.callback();
-                }
-                catch (Exception e)
-                {
-                    m_log.ErrorFormat("{0}: ProcessPostStepTaints: {1}: Exception: {2}", LogHeader, tcbe.ident, e);
-                }
-            }
-            oldList.Clear();
-        }
-    }
-
     // Only used for debugging. Does not change state of anything so locking is not necessary.
     public bool AssertInTaintTime(string whereFrom)
     {
@@ -870,517 +825,21 @@ public sealed class BSScene : PhysicsScene, IPhysicsParameters
         {
             DetailLog("{0},BSScene.AssertInTaintTime,NOT IN TAINT TIME,Region={1},Where={2}", DetailLogZero, RegionName, whereFrom);
             m_log.ErrorFormat("{0} NOT IN TAINT TIME!! Region={1}, Where={2}", LogHeader, RegionName, whereFrom);
-            Util.PrintCallStack();  // Prints the stack into the DEBUG log file.
+            Util.PrintCallStack(DetailLog);
         }
         return InTaintTime;
     }
 
     #endregion // Taints
 
-    #region Vehicles
-
-    public void VehicleInSceneTypeChanged(BSPrim vehic, Vehicle newType)
-    {
-        RemoveVehiclePrim(vehic);
-        if (newType != Vehicle.TYPE_NONE)
-        {
-           // make it so the scene will call us each tick to do vehicle things
-           AddVehiclePrim(vehic);
-        }
-    }
-
-    // Make so the scene will call this prim for vehicle actions each tick.
-    // Safe to call if prim is already in the vehicle list.
-    public void AddVehiclePrim(BSPrim vehicle)
-    {
-        lock (m_vehicles)
-        {
-            if (!m_vehicles.Contains(vehicle))
-            {
-                m_vehicles.Add(vehicle);
-            }
-        }
-    }
-
-    // Remove a prim from our list of vehicles.
-    // Safe to call if the prim is not in the vehicle list.
-    public void RemoveVehiclePrim(BSPrim vehicle)
-    {
-        lock (m_vehicles)
-        {
-            if (m_vehicles.Contains(vehicle))
-            {
-                m_vehicles.Remove(vehicle);
-            }
-        }
-    }
-
-    // Some prims have extra vehicle actions
-    // Called at taint time!
-    private void ProcessVehicles(float timeStep)
-    {
-        foreach (BSPhysObject pobj in m_vehicles)
-        {
-            pobj.StepVehicle(timeStep);
-        }
-    }
-    #endregion Vehicles
-
     #region INI and command line parameter processing
 
-    delegate void ParamUser(BSScene scene, IConfig conf, string paramName, float val);
-    delegate float ParamGet(BSScene scene);
-    delegate void ParamSet(BSScene scene, string paramName, uint localID, float val);
-    delegate void SetOnObject(BSScene scene, BSPhysObject obj, float val);
-
-    private struct ParameterDefn
-    {
-        public string name;         // string name of the parameter
-        public string desc;         // a short description of what the parameter means
-        public float defaultValue;  // default value if not specified anywhere else
-        public ParamUser userParam; // get the value from the configuration file
-        public ParamGet getter;     // return the current value stored for this parameter
-        public ParamSet setter;     // set the current value for this parameter
-        public SetOnObject onObject;    // set the value on an object in the physical domain
-        public ParameterDefn(string n, string d, float v, ParamUser u, ParamGet g, ParamSet s)
-        {
-            name = n;
-            desc = d;
-            defaultValue = v;
-            userParam = u;
-            getter = g;
-            setter = s;
-            onObject = null;
-        }
-        public ParameterDefn(string n, string d, float v, ParamUser u, ParamGet g, ParamSet s, SetOnObject o)
-        {
-            name = n;
-            desc = d;
-            defaultValue = v;
-            userParam = u;
-            getter = g;
-            setter = s;
-            onObject = o;
-        }
-    }
-
-    // List of all of the externally visible parameters.
-    // For each parameter, this table maps a text name to getter and setters.
-    // To add a new externally referencable/settable parameter, add the paramter storage
-    //    location somewhere in the program and make an entry in this table with the
-    //    getters and setters.
-    // It is easiest to find an existing definition and copy it.
-    // Parameter values are floats. Booleans are converted to a floating value.
-    //
-    // A ParameterDefn() takes the following parameters:
-    //    -- the text name of the parameter. This is used for console input and ini file.
-    //    -- a short text description of the parameter. This shows up in the console listing.
-    //    -- a delegate for fetching the parameter from the ini file.
-    //          Should handle fetching the right type from the ini file and converting it.
-    //    -- a delegate for getting the value as a float
-    //    -- a delegate for setting the value from a float
-    //
-    // The single letter parameters for the delegates are:
-    //    s = BSScene
-    //    o = BSPhysObject
-    //    p = string parameter name
-    //    l = localID of referenced object
-    //    v = float value
-    //    cf = parameter configuration class (for fetching values from ini file)
-    private ParameterDefn[] ParameterDefinitions =
-    {
-        new ParameterDefn("MeshSculptedPrim", "Whether to create meshes for sculpties",
-            ConfigurationParameters.numericTrue,
-            (s,cf,p,v) => { s.ShouldMeshSculptedPrim = cf.GetBoolean(p, s.BoolNumeric(v)); },
-            (s) => { return s.NumericBool(s.ShouldMeshSculptedPrim); },
-            (s,p,l,v) => { s.ShouldMeshSculptedPrim = s.BoolNumeric(v); } ),
-        new ParameterDefn("ForceSimplePrimMeshing", "If true, only use primitive meshes for objects",
-            ConfigurationParameters.numericFalse,
-            (s,cf,p,v) => { s.ShouldForceSimplePrimMeshing = cf.GetBoolean(p, s.BoolNumeric(v)); },
-            (s) => { return s.NumericBool(s.ShouldForceSimplePrimMeshing); },
-            (s,p,l,v) => { s.ShouldForceSimplePrimMeshing = s.BoolNumeric(v); } ),
-        new ParameterDefn("UseHullsForPhysicalObjects", "If true, create hulls for physical objects",
-            ConfigurationParameters.numericTrue,
-            (s,cf,p,v) => { s.ShouldUseHullsForPhysicalObjects = cf.GetBoolean(p, s.BoolNumeric(v)); },
-            (s) => { return s.NumericBool(s.ShouldUseHullsForPhysicalObjects); },
-            (s,p,l,v) => { s.ShouldUseHullsForPhysicalObjects = s.BoolNumeric(v); } ),
-
-        new ParameterDefn("MeshLevelOfDetail", "Level of detail to render meshes (32, 16, 8 or 4. 32=most detailed)",
-            8f,
-            (s,cf,p,v) => { s.MeshLOD = (float)cf.GetInt(p, (int)v); },
-            (s) => { return s.MeshLOD; },
-            (s,p,l,v) => { s.MeshLOD = v; } ),
-        new ParameterDefn("MeshLevelOfDetailMegaPrim", "Level of detail to render meshes larger than threshold meters",
-            16f,
-            (s,cf,p,v) => { s.MeshMegaPrimLOD = (float)cf.GetInt(p, (int)v); },
-            (s) => { return s.MeshMegaPrimLOD; },
-            (s,p,l,v) => { s.MeshMegaPrimLOD = v; } ),
-        new ParameterDefn("MeshLevelOfDetailMegaPrimThreshold", "Size (in meters) of a mesh before using MeshMegaPrimLOD",
-            10f,
-            (s,cf,p,v) => { s.MeshMegaPrimThreshold = (float)cf.GetInt(p, (int)v); },
-            (s) => { return s.MeshMegaPrimThreshold; },
-            (s,p,l,v) => { s.MeshMegaPrimThreshold = v; } ),
-        new ParameterDefn("SculptLevelOfDetail", "Level of detail to render sculpties (32, 16, 8 or 4. 32=most detailed)",
-            32f,
-            (s,cf,p,v) => { s.SculptLOD = (float)cf.GetInt(p, (int)v); },
-            (s) => { return s.SculptLOD; },
-            (s,p,l,v) => { s.SculptLOD = v; } ),
-
-        new ParameterDefn("MaxSubStep", "In simulation step, maximum number of substeps",
-            10f,
-            (s,cf,p,v) => { s.m_maxSubSteps = cf.GetInt(p, (int)v); },
-            (s) => { return (float)s.m_maxSubSteps; },
-            (s,p,l,v) => { s.m_maxSubSteps = (int)v; } ),
-        new ParameterDefn("FixedTimeStep", "In simulation step, seconds of one substep (1/60)",
-            1f / 60f,
-            (s,cf,p,v) => { s.m_fixedTimeStep = cf.GetFloat(p, v); },
-            (s) => { return (float)s.m_fixedTimeStep; },
-            (s,p,l,v) => { s.m_fixedTimeStep = v; } ),
-        new ParameterDefn("MaxCollisionsPerFrame", "Max collisions returned at end of each frame",
-            2048f,
-            (s,cf,p,v) => { s.m_maxCollisionsPerFrame = cf.GetInt(p, (int)v); },
-            (s) => { return (float)s.m_maxCollisionsPerFrame; },
-            (s,p,l,v) => { s.m_maxCollisionsPerFrame = (int)v; } ),
-        new ParameterDefn("MaxUpdatesPerFrame", "Max updates returned at end of each frame",
-            8000f,
-            (s,cf,p,v) => { s.m_maxUpdatesPerFrame = cf.GetInt(p, (int)v); },
-            (s) => { return (float)s.m_maxUpdatesPerFrame; },
-            (s,p,l,v) => { s.m_maxUpdatesPerFrame = (int)v; } ),
-        new ParameterDefn("MaxTaintsToProcessPerStep", "Number of update taints to process before each simulation step",
-            500f,
-            (s,cf,p,v) => { s.m_taintsToProcessPerStep = cf.GetInt(p, (int)v); },
-            (s) => { return (float)s.m_taintsToProcessPerStep; },
-            (s,p,l,v) => { s.m_taintsToProcessPerStep = (int)v; } ),
-        new ParameterDefn("MaxObjectMass", "Maximum object mass (10000.01)",
-            10000.01f,
-            (s,cf,p,v) => { s.MaximumObjectMass = cf.GetFloat(p, v); },
-            (s) => { return (float)s.MaximumObjectMass; },
-            (s,p,l,v) => { s.MaximumObjectMass = v; } ),
-
-        new ParameterDefn("PID_D", "Derivitive factor for motion smoothing",
-            2200f,
-            (s,cf,p,v) => { s.PID_D = cf.GetFloat(p, v); },
-            (s) => { return (float)s.PID_D; },
-            (s,p,l,v) => { s.PID_D = v; } ),
-        new ParameterDefn("PID_P", "Parameteric factor for motion smoothing",
-            900f,
-            (s,cf,p,v) => { s.PID_P = cf.GetFloat(p, v); },
-            (s) => { return (float)s.PID_P; },
-            (s,p,l,v) => { s.PID_P = v; } ),
-
-        new ParameterDefn("DefaultFriction", "Friction factor used on new objects",
-            0.5f,
-            (s,cf,p,v) => { s.m_params[0].defaultFriction = cf.GetFloat(p, v); },
-            (s) => { return s.m_params[0].defaultFriction; },
-            (s,p,l,v) => { s.m_params[0].defaultFriction = v; } ),
-        new ParameterDefn("DefaultDensity", "Density for new objects" ,
-            10.000006836f,  // Aluminum g/cm3
-            (s,cf,p,v) => { s.m_params[0].defaultDensity = cf.GetFloat(p, v); },
-            (s) => { return s.m_params[0].defaultDensity; },
-            (s,p,l,v) => { s.m_params[0].defaultDensity = v; } ),
-        new ParameterDefn("DefaultRestitution", "Bouncyness of an object" ,
-            0f,
-            (s,cf,p,v) => { s.m_params[0].defaultRestitution = cf.GetFloat(p, v); },
-            (s) => { return s.m_params[0].defaultRestitution; },
-            (s,p,l,v) => { s.m_params[0].defaultRestitution = v; } ),
-        new ParameterDefn("CollisionMargin", "Margin around objects before collisions are calculated (must be zero!)",
-            0f,
-            (s,cf,p,v) => { s.m_params[0].collisionMargin = cf.GetFloat(p, v); },
-            (s) => { return s.m_params[0].collisionMargin; },
-            (s,p,l,v) => { s.m_params[0].collisionMargin = v; } ),
-        new ParameterDefn("Gravity", "Vertical force of gravity (negative means down)",
-            -9.80665f,
-            (s,cf,p,v) => { s.m_params[0].gravity = cf.GetFloat(p, v); },
-            (s) => { return s.m_params[0].gravity; },
-            (s,p,l,v) => { s.UpdateParameterObject(ref s.m_params[0].gravity, p, PhysParameterEntry.APPLY_TO_NONE, v); },
-            (s,o,v) => { BulletSimAPI.SetGravity2(s.World.ptr, new Vector3(0f,0f,v)); } ),
-
-
-        new ParameterDefn("LinearDamping", "Factor to damp linear movement per second (0.0 - 1.0)",
-            0f,
-            (s,cf,p,v) => { s.m_params[0].linearDamping = cf.GetFloat(p, v); },
-            (s) => { return s.m_params[0].linearDamping; },
-            (s,p,l,v) => { s.UpdateParameterObject(ref s.m_params[0].linearDamping, p, l, v); },
-            (s,o,v) => { BulletSimAPI.SetDamping2(o.PhysBody.ptr, v, s.m_params[0].angularDamping); } ),
-        new ParameterDefn("AngularDamping", "Factor to damp angular movement per second (0.0 - 1.0)",
-            0f,
-            (s,cf,p,v) => { s.m_params[0].angularDamping = cf.GetFloat(p, v); },
-            (s) => { return s.m_params[0].angularDamping; },
-            (s,p,l,v) => { s.UpdateParameterObject(ref s.m_params[0].angularDamping, p, l, v); },
-            (s,o,v) => { BulletSimAPI.SetDamping2(o.PhysBody.ptr, s.m_params[0].linearDamping, v); } ),
-        new ParameterDefn("DeactivationTime", "Seconds before considering an object potentially static",
-            0.2f,
-            (s,cf,p,v) => { s.m_params[0].deactivationTime = cf.GetFloat(p, v); },
-            (s) => { return s.m_params[0].deactivationTime; },
-            (s,p,l,v) => { s.UpdateParameterObject(ref s.m_params[0].deactivationTime, p, l, v); },
-            (s,o,v) => { BulletSimAPI.SetDeactivationTime2(o.PhysBody.ptr, v); } ),
-        new ParameterDefn("LinearSleepingThreshold", "Seconds to measure linear movement before considering static",
-            0.8f,
-            (s,cf,p,v) => { s.m_params[0].linearSleepingThreshold = cf.GetFloat(p, v); },
-            (s) => { return s.m_params[0].linearSleepingThreshold; },
-            (s,p,l,v) => { s.UpdateParameterObject(ref s.m_params[0].linearSleepingThreshold, p, l, v); },
-            (s,o,v) => { BulletSimAPI.SetSleepingThresholds2(o.PhysBody.ptr, v, v); } ),
-        new ParameterDefn("AngularSleepingThreshold", "Seconds to measure angular movement before considering static",
-            1.0f,
-            (s,cf,p,v) => { s.m_params[0].angularSleepingThreshold = cf.GetFloat(p, v); },
-            (s) => { return s.m_params[0].angularSleepingThreshold; },
-            (s,p,l,v) => { s.UpdateParameterObject(ref s.m_params[0].angularSleepingThreshold, p, l, v); },
-            (s,o,v) => { BulletSimAPI.SetSleepingThresholds2(o.PhysBody.ptr, v, v); } ),
-        new ParameterDefn("CcdMotionThreshold", "Continuious collision detection threshold (0 means no CCD)" ,
-            0f,     // set to zero to disable
-            (s,cf,p,v) => { s.m_params[0].ccdMotionThreshold = cf.GetFloat(p, v); },
-            (s) => { return s.m_params[0].ccdMotionThreshold; },
-            (s,p,l,v) => { s.UpdateParameterObject(ref s.m_params[0].ccdMotionThreshold, p, l, v); },
-            (s,o,v) => { BulletSimAPI.SetCcdMotionThreshold2(o.PhysBody.ptr, v); } ),
-        new ParameterDefn("CcdSweptSphereRadius", "Continuious collision detection test radius" ,
-            0f,
-            (s,cf,p,v) => { s.m_params[0].ccdSweptSphereRadius = cf.GetFloat(p, v); },
-            (s) => { return s.m_params[0].ccdSweptSphereRadius; },
-            (s,p,l,v) => { s.UpdateParameterObject(ref s.m_params[0].ccdSweptSphereRadius, p, l, v); },
-            (s,o,v) => { BulletSimAPI.SetCcdSweptSphereRadius2(o.PhysBody.ptr, v); } ),
-        new ParameterDefn("ContactProcessingThreshold", "Distance between contacts before doing collision check" ,
-            0.1f,
-            (s,cf,p,v) => { s.m_params[0].contactProcessingThreshold = cf.GetFloat(p, v); },
-            (s) => { return s.m_params[0].contactProcessingThreshold; },
-            (s,p,l,v) => { s.UpdateParameterObject(ref s.m_params[0].contactProcessingThreshold, p, l, v); },
-            (s,o,v) => { BulletSimAPI.SetContactProcessingThreshold2(o.PhysBody.ptr, v); } ),
-
-            new ParameterDefn("TerrainImplementation", "Type of shape to use for terrain (0=heightmap, 1=mesh)",
-            (float)BSTerrainPhys.TerrainImplementation.Mesh,
-            (s,cf,p,v) => { s.m_params[0].terrainImplementation = cf.GetFloat(p,v); },
-            (s) => { return s.m_params[0].terrainImplementation; },
-            (s,p,l,v) => { s.m_params[0].terrainImplementation = v; } ),
-        new ParameterDefn("TerrainFriction", "Factor to reduce movement against terrain surface" ,
-            0.5f,
-            (s,cf,p,v) => { s.m_params[0].terrainFriction = cf.GetFloat(p, v); },
-            (s) => { return s.m_params[0].terrainFriction; },
-            (s,p,l,v) => { s.m_params[0].terrainFriction = v;  /* TODO: set on real terrain */} ),
-        new ParameterDefn("TerrainHitFraction", "Distance to measure hit collisions" ,
-            0.8f,
-            (s,cf,p,v) => { s.m_params[0].terrainHitFraction = cf.GetFloat(p, v); },
-            (s) => { return s.m_params[0].terrainHitFraction; },
-            (s,p,l,v) => { s.m_params[0].terrainHitFraction = v; /* TODO: set on real terrain */ } ),
-        new ParameterDefn("TerrainRestitution", "Bouncyness" ,
-            0f,
-            (s,cf,p,v) => { s.m_params[0].terrainRestitution = cf.GetFloat(p, v); },
-            (s) => { return s.m_params[0].terrainRestitution; },
-            (s,p,l,v) => { s.m_params[0].terrainRestitution = v;  /* TODO: set on real terrain */ } ),
-        new ParameterDefn("AvatarFriction", "Factor to reduce movement against an avatar. Changed on avatar recreation.",
-            0.2f,
-            (s,cf,p,v) => { s.m_params[0].avatarFriction = cf.GetFloat(p, v); },
-            (s) => { return s.m_params[0].avatarFriction; },
-            (s,p,l,v) => { s.UpdateParameterObject(ref s.m_params[0].avatarFriction, p, l, v); } ),
-        new ParameterDefn("AvatarStandingFriction", "Avatar friction when standing. Changed on avatar recreation.",
-            10f,
-            (s,cf,p,v) => { s.m_params[0].avatarStandingFriction = cf.GetFloat(p, v); },
-            (s) => { return s.m_params[0].avatarStandingFriction; },
-            (s,p,l,v) => { s.m_params[0].avatarStandingFriction = v; } ),
-        new ParameterDefn("AvatarDensity", "Density of an avatar. Changed on avatar recreation.",
-            60f,
-            (s,cf,p,v) => { s.m_params[0].avatarDensity = cf.GetFloat(p, v); },
-            (s) => { return s.m_params[0].avatarDensity; },
-            (s,p,l,v) => { s.UpdateParameterObject(ref s.m_params[0].avatarDensity, p, l, v); } ),
-        new ParameterDefn("AvatarRestitution", "Bouncyness. Changed on avatar recreation.",
-            0f,
-            (s,cf,p,v) => { s.m_params[0].avatarRestitution = cf.GetFloat(p, v); },
-            (s) => { return s.m_params[0].avatarRestitution; },
-            (s,p,l,v) => { s.UpdateParameterObject(ref s.m_params[0].avatarRestitution, p, l, v); } ),
-        new ParameterDefn("AvatarCapsuleWidth", "The distance between the sides of the avatar capsule",
-            0.6f,
-            (s,cf,p,v) => { s.m_params[0].avatarCapsuleWidth = cf.GetFloat(p, v); },
-            (s) => { return s.m_params[0].avatarCapsuleWidth; },
-            (s,p,l,v) => { s.UpdateParameterObject(ref s.m_params[0].avatarCapsuleWidth, p, l, v); } ),
-        new ParameterDefn("AvatarCapsuleDepth", "The distance between the front and back of the avatar capsule",
-            0.45f,
-            (s,cf,p,v) => { s.m_params[0].avatarCapsuleDepth = cf.GetFloat(p, v); },
-            (s) => { return s.m_params[0].avatarCapsuleDepth; },
-            (s,p,l,v) => { s.UpdateParameterObject(ref s.m_params[0].avatarCapsuleDepth, p, l, v); } ),
-        new ParameterDefn("AvatarCapsuleHeight", "Default height of space around avatar",
-            1.5f,
-            (s,cf,p,v) => { s.m_params[0].avatarCapsuleHeight = cf.GetFloat(p, v); },
-            (s) => { return s.m_params[0].avatarCapsuleHeight; },
-            (s,p,l,v) => { s.UpdateParameterObject(ref s.m_params[0].avatarCapsuleHeight, p, l, v); } ),
-            new ParameterDefn("AvatarContactProcessingThreshold", "Distance from capsule to check for collisions",
-            0.1f,
-            (s,cf,p,v) => { s.m_params[0].avatarContactProcessingThreshold = cf.GetFloat(p, v); },
-            (s) => { return s.m_params[0].avatarContactProcessingThreshold; },
-            (s,p,l,v) => { s.UpdateParameterObject(ref s.m_params[0].avatarContactProcessingThreshold, p, l, v); } ),
-
-
-            new ParameterDefn("MaxPersistantManifoldPoolSize", "Number of manifolds pooled (0 means default of 4096)",
-            0f,
-            (s,cf,p,v) => { s.m_params[0].maxPersistantManifoldPoolSize = cf.GetFloat(p, v); },
-            (s) => { return s.m_params[0].maxPersistantManifoldPoolSize; },
-            (s,p,l,v) => { s.m_params[0].maxPersistantManifoldPoolSize = v; } ),
-            new ParameterDefn("MaxCollisionAlgorithmPoolSize", "Number of collisions pooled (0 means default of 4096)",
-            0f,
-            (s,cf,p,v) => { s.m_params[0].maxCollisionAlgorithmPoolSize = cf.GetFloat(p, v); },
-            (s) => { return s.m_params[0].maxCollisionAlgorithmPoolSize; },
-            (s,p,l,v) => { s.m_params[0].maxCollisionAlgorithmPoolSize = v; } ),
-            new ParameterDefn("ShouldDisableContactPoolDynamicAllocation", "Enable to allow large changes in object count",
-            ConfigurationParameters.numericFalse,
-            (s,cf,p,v) => { s.m_params[0].shouldDisableContactPoolDynamicAllocation = s.NumericBool(cf.GetBoolean(p, s.BoolNumeric(v))); },
-            (s) => { return s.m_params[0].shouldDisableContactPoolDynamicAllocation; },
-            (s,p,l,v) => { s.m_params[0].shouldDisableContactPoolDynamicAllocation = v; } ),
-            new ParameterDefn("ShouldForceUpdateAllAabbs", "Enable to recomputer AABBs every simulator step",
-            ConfigurationParameters.numericFalse,
-            (s,cf,p,v) => { s.m_params[0].shouldForceUpdateAllAabbs = s.NumericBool(cf.GetBoolean(p, s.BoolNumeric(v))); },
-            (s) => { return s.m_params[0].shouldForceUpdateAllAabbs; },
-            (s,p,l,v) => { s.m_params[0].shouldForceUpdateAllAabbs = v; } ),
-            new ParameterDefn("ShouldRandomizeSolverOrder", "Enable for slightly better stacking interaction",
-            ConfigurationParameters.numericTrue,
-            (s,cf,p,v) => { s.m_params[0].shouldRandomizeSolverOrder = s.NumericBool(cf.GetBoolean(p, s.BoolNumeric(v))); },
-            (s) => { return s.m_params[0].shouldRandomizeSolverOrder; },
-            (s,p,l,v) => { s.m_params[0].shouldRandomizeSolverOrder = v; } ),
-            new ParameterDefn("ShouldSplitSimulationIslands", "Enable splitting active object scanning islands",
-            ConfigurationParameters.numericTrue,
-            (s,cf,p,v) => { s.m_params[0].shouldSplitSimulationIslands = s.NumericBool(cf.GetBoolean(p, s.BoolNumeric(v))); },
-            (s) => { return s.m_params[0].shouldSplitSimulationIslands; },
-            (s,p,l,v) => { s.m_params[0].shouldSplitSimulationIslands = v; } ),
-            new ParameterDefn("ShouldEnableFrictionCaching", "Enable friction computation caching",
-            ConfigurationParameters.numericFalse,
-            (s,cf,p,v) => { s.m_params[0].shouldEnableFrictionCaching = s.NumericBool(cf.GetBoolean(p, s.BoolNumeric(v))); },
-            (s) => { return s.m_params[0].shouldEnableFrictionCaching; },
-            (s,p,l,v) => { s.m_params[0].shouldEnableFrictionCaching = v; } ),
-            new ParameterDefn("NumberOfSolverIterations", "Number of internal iterations (0 means default)",
-            0f,     // zero says use Bullet default
-            (s,cf,p,v) => { s.m_params[0].numberOfSolverIterations = cf.GetFloat(p, v); },
-            (s) => { return s.m_params[0].numberOfSolverIterations; },
-            (s,p,l,v) => { s.m_params[0].numberOfSolverIterations = v; } ),
-
-            new ParameterDefn("LinksetImplementation", "Type of linkset implementation (0=Constraint, 1=Compound, 2=Manual)",
-            (float)BSLinkset.LinksetImplementation.Compound,
-            (s,cf,p,v) => { s.m_params[0].linksetImplementation = cf.GetFloat(p,v); },
-            (s) => { return s.m_params[0].linksetImplementation; },
-            (s,p,l,v) => { s.m_params[0].linksetImplementation = v; } ),
-            new ParameterDefn("LinkConstraintUseFrameOffset", "For linksets built with constraints, enable frame offsetFor linksets built with constraints, enable frame offset.",
-            ConfigurationParameters.numericFalse,
-            (s,cf,p,v) => { s.m_params[0].linkConstraintUseFrameOffset = s.NumericBool(cf.GetBoolean(p, s.BoolNumeric(v))); },
-            (s) => { return s.m_params[0].linkConstraintUseFrameOffset; },
-            (s,p,l,v) => { s.m_params[0].linkConstraintUseFrameOffset = v; } ),
-            new ParameterDefn("LinkConstraintEnableTransMotor", "Whether to enable translational motor on linkset constraints",
-            ConfigurationParameters.numericTrue,
-            (s,cf,p,v) => { s.m_params[0].linkConstraintEnableTransMotor = s.NumericBool(cf.GetBoolean(p, s.BoolNumeric(v))); },
-            (s) => { return s.m_params[0].linkConstraintEnableTransMotor; },
-            (s,p,l,v) => { s.m_params[0].linkConstraintEnableTransMotor = v; } ),
-            new ParameterDefn("LinkConstraintTransMotorMaxVel", "Maximum velocity to be applied by translational motor in linkset constraints",
-            5.0f,
-            (s,cf,p,v) => { s.m_params[0].linkConstraintTransMotorMaxVel = cf.GetFloat(p, v); },
-            (s) => { return s.m_params[0].linkConstraintTransMotorMaxVel; },
-            (s,p,l,v) => { s.m_params[0].linkConstraintTransMotorMaxVel = v; } ),
-            new ParameterDefn("LinkConstraintTransMotorMaxForce", "Maximum force to be applied by translational motor in linkset constraints",
-            0.1f,
-            (s,cf,p,v) => { s.m_params[0].linkConstraintTransMotorMaxForce = cf.GetFloat(p, v); },
-            (s) => { return s.m_params[0].linkConstraintTransMotorMaxForce; },
-            (s,p,l,v) => { s.m_params[0].linkConstraintTransMotorMaxForce = v; } ),
-            new ParameterDefn("LinkConstraintCFM", "Amount constraint can be violated. 0=no violation, 1=infinite. Default=0.1",
-            0.1f,
-            (s,cf,p,v) => { s.m_params[0].linkConstraintCFM = cf.GetFloat(p, v); },
-            (s) => { return s.m_params[0].linkConstraintCFM; },
-            (s,p,l,v) => { s.m_params[0].linkConstraintCFM = v; } ),
-            new ParameterDefn("LinkConstraintERP", "Amount constraint is corrected each tick. 0=none, 1=all. Default = 0.2",
-            0.1f,
-            (s,cf,p,v) => { s.m_params[0].linkConstraintERP = cf.GetFloat(p, v); },
-            (s) => { return s.m_params[0].linkConstraintERP; },
-            (s,p,l,v) => { s.m_params[0].linkConstraintERP = v; } ),
-            new ParameterDefn("LinkConstraintSolverIterations", "Number of solver iterations when computing constraint. (0 = Bullet default)",
-            40,
-            (s,cf,p,v) => { s.m_params[0].linkConstraintSolverIterations = cf.GetFloat(p, v); },
-            (s) => { return s.m_params[0].linkConstraintSolverIterations; },
-            (s,p,l,v) => { s.m_params[0].linkConstraintSolverIterations = v; } ),
-
-        new ParameterDefn("LogPhysicsStatisticsFrames", "Frames between outputting detailed phys stats. (0 is off)",
-            0f,
-            (s,cf,p,v) => { s.m_params[0].physicsLoggingFrames = cf.GetInt(p, (int)v); },
-            (s) => { return (float)s.m_params[0].physicsLoggingFrames; },
-            (s,p,l,v) => { s.m_params[0].physicsLoggingFrames = (int)v; } ),
-    };
-
-    // Convert a boolean to our numeric true and false values
-    public float NumericBool(bool b)
-    {
-        return (b ? ConfigurationParameters.numericTrue : ConfigurationParameters.numericFalse);
-    }
-
-    // Convert numeric true and false values to a boolean
-    public bool BoolNumeric(float b)
-    {
-        return (b == ConfigurationParameters.numericTrue ? true : false);
-    }
-
-    // Search through the parameter definitions and return the matching
-    //    ParameterDefn structure.
-    // Case does not matter as names are compared after converting to lower case.
-    // Returns 'false' if the parameter is not found.
-    private bool TryGetParameter(string paramName, out ParameterDefn defn)
-    {
-        bool ret = false;
-        ParameterDefn foundDefn = new ParameterDefn();
-        string pName = paramName.ToLower();
-
-        foreach (ParameterDefn parm in ParameterDefinitions)
-        {
-            if (pName == parm.name.ToLower())
-            {
-                foundDefn = parm;
-                ret = true;
-                break;
-            }
-        }
-        defn = foundDefn;
-        return ret;
-    }
-
-    // Pass through the settable parameters and set the default values
-    private void SetParameterDefaultValues()
-    {
-        foreach (ParameterDefn parm in ParameterDefinitions)
-        {
-            parm.setter(this, parm.name, PhysParameterEntry.APPLY_TO_NONE, parm.defaultValue);
-        }
-    }
-
-    // Get user set values out of the ini file.
-    private void SetParameterConfigurationValues(IConfig cfg)
-    {
-        foreach (ParameterDefn parm in ParameterDefinitions)
-        {
-            parm.userParam(this, cfg, parm.name, parm.defaultValue);
-        }
-    }
-
-    private PhysParameterEntry[] SettableParameters = new PhysParameterEntry[1];
-
-    // This creates an array in the correct format for returning the list of
-    //    parameters. This is used by the 'list' option of the 'physics' command.
-    private void BuildParameterTable()
-    {
-        if (SettableParameters.Length < ParameterDefinitions.Length)
-        {
-            List<PhysParameterEntry> entries = new List<PhysParameterEntry>();
-            for (int ii = 0; ii < ParameterDefinitions.Length; ii++)
-            {
-                ParameterDefn pd = ParameterDefinitions[ii];
-                entries.Add(new PhysParameterEntry(pd.name, pd.desc));
-            }
-
-            // make the list in alphabetical order for estetic reasons
-            entries.Sort(delegate(PhysParameterEntry ppe1, PhysParameterEntry ppe2)
-            {
-                return ppe1.name.CompareTo(ppe2.name);
-            });
-
-            SettableParameters = entries.ToArray();
-        }
-    }
-
-
     #region IPhysicsParameters
     // Get the list of parameters this physics engine supports
     public PhysParameterEntry[] GetParameterList()
     {
-        BuildParameterTable();
-        return SettableParameters;
+        BSParam.BuildParameterTable();
+        return BSParam.SettableParameters;
     }
 
     // Set parameter on a specific or all instances.
@@ -1392,8 +851,8 @@ public sealed class BSScene : PhysicsScene, IPhysicsParameters
     public bool SetPhysicsParameter(string parm, float val, uint localID)
     {
         bool ret = false;
-        ParameterDefn theParam;
-        if (TryGetParameter(parm, out theParam))
+        BSParam.ParameterDefn theParam;
+        if (BSParam.TryGetParameter(parm, out theParam))
         {
             theParam.setter(this, parm, localID, val);
             ret = true;
@@ -1405,19 +864,20 @@ public sealed class BSScene : PhysicsScene, IPhysicsParameters
     // If the local ID is APPLY_TO_NONE, just change the default value
     // If the localID is APPLY_TO_ALL change the default value and apply the new value to all the lIDs
     // If the localID is a specific object, apply the parameter change to only that object
-    private void UpdateParameterObject(ref float defaultLoc, string parm, uint localID, float val)
+    internal delegate void AssignVal(float x);
+    internal void UpdateParameterObject(AssignVal setDefault, string parm, uint localID, float val)
     {
         List<uint> objectIDs = new List<uint>();
         switch (localID)
         {
             case PhysParameterEntry.APPLY_TO_NONE:
-                defaultLoc = val;   // setting only the default value
+                setDefault(val);            // setting only the default value
                 // This will cause a call into the physical world if some operation is specified (SetOnObject).
                 objectIDs.Add(TERRAIN_ID);
                 TaintedUpdateParameter(parm, objectIDs, val);
                 break;
             case PhysParameterEntry.APPLY_TO_ALL:
-                defaultLoc = val;  // setting ALL also sets the default value
+                setDefault(val);  // setting ALL also sets the default value
                 lock (PhysObjects) objectIDs = new List<uint>(PhysObjects.Keys);
                 TaintedUpdateParameter(parm, objectIDs, val);
                 break;
@@ -1436,8 +896,8 @@ public sealed class BSScene : PhysicsScene, IPhysicsParameters
         List<uint> xlIDs = lIDs;
         string xparm = parm;
         TaintedObject("BSScene.UpdateParameterSet", delegate() {
-            ParameterDefn thisParam;
-            if (TryGetParameter(xparm, out thisParam))
+            BSParam.ParameterDefn thisParam;
+            if (BSParam.TryGetParameter(xparm, out thisParam))
             {
                 if (thisParam.onObject != null)
                 {
@@ -1458,8 +918,8 @@ public sealed class BSScene : PhysicsScene, IPhysicsParameters
     {
         float val = 0f;
         bool ret = false;
-        ParameterDefn theParam;
-        if (TryGetParameter(parm, out theParam))
+        BSParam.ParameterDefn theParam;
+        if (BSParam.TryGetParameter(parm, out theParam))
         {
             val = theParam.getter(this);
             ret = true;
@@ -1472,22 +932,12 @@ public sealed class BSScene : PhysicsScene, IPhysicsParameters
 
     #endregion Runtime settable parameters
 
-    // Debugging routine for dumping detailed physical information for vehicle prims
-    private void DumpVehicles()
-    {
-        foreach (BSPrim prim in m_vehicles)
-        {
-            BulletSimAPI.DumpRigidBody2(World.ptr, prim.PhysBody.ptr);
-            BulletSimAPI.DumpCollisionShape2(World.ptr, prim.PhysShape.ptr);
-        }
-    }
-
     // Invoke the detailed logger and output something if it's enabled.
     public void DetailLog(string msg, params Object[] args)
     {
         PhysicsLogging.Write(msg, args);
         // Add the Flush() if debugging crashes. Gets all the messages written out.
-        // PhysicsLogging.Flush();
+        if (m_physicsLoggingDoFlush) PhysicsLogging.Flush();
     }
     // Used to fill in the LocalID when there isn't one. It's the correct number of characters.
     public const string DetailLogZero = "0000000000";
diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSShapeCollection.cs b/OpenSim/Region/Physics/BulletSPlugin/BSShapeCollection.cs
index 892c34b..b4f764b 100755
--- a/OpenSim/Region/Physics/BulletSPlugin/BSShapeCollection.cs
+++ b/OpenSim/Region/Physics/BulletSPlugin/BSShapeCollection.cs
@@ -45,7 +45,7 @@ public sealed class BSShapeCollection : IDisposable
     // Description of a Mesh
     private struct MeshDesc
     {
-        public IntPtr ptr;
+        public BulletShape shape;
         public int referenceCount;
         public DateTime lastReferenced;
         public UInt64 shapeKey;
@@ -55,7 +55,7 @@ public sealed class BSShapeCollection : IDisposable
     // Meshes and hulls have the same shape hash key but we only need hulls for efficient collision calculations.
     private struct HullDesc
     {
-        public IntPtr ptr;
+        public BulletShape shape;
         public int referenceCount;
         public DateTime lastReferenced;
         public UInt64 shapeKey;
@@ -65,9 +65,16 @@ public sealed class BSShapeCollection : IDisposable
     private Dictionary<System.UInt64, MeshDesc> Meshes = new Dictionary<System.UInt64, MeshDesc>();
     private Dictionary<System.UInt64, HullDesc> Hulls = new Dictionary<System.UInt64, HullDesc>();
 
+    private bool DDetail = false;
+
     public BSShapeCollection(BSScene physScene)
     {
         PhysicsScene = physScene;
+        // Set the next to 'true' for very detailed shape update detailed logging (detailed details?)
+        // While detailed debugging is still active, this is better than commenting out all the
+        //     DetailLog statements. When debugging slows down, this and the protected logging
+        //     statements can be commented/removed.
+        DDetail = true;
     }
 
     public void Dispose()
@@ -91,7 +98,7 @@ public sealed class BSShapeCollection : IDisposable
     //    higher level dependencies on the shape or body. Mostly used for LinkSets to
     //    remove the physical constraints before the body is destroyed.
     // Called at taint-time!!
-    public bool GetBodyAndShape(bool forceRebuild, BulletSim sim, BSPhysObject prim,
+    public bool GetBodyAndShape(bool forceRebuild, BulletWorld sim, BSPhysObject prim,
                     ShapeDestructionCallback shapeCallback, BodyDestructionCallback bodyCallback)
     {
         PhysicsScene.AssertInTaintTime("BSShapeCollection.GetBodyAndShape");
@@ -119,6 +126,11 @@ public sealed class BSShapeCollection : IDisposable
         return ret;
     }
 
+    public bool GetBodyAndShape(bool forceRebuild, BulletWorld sim, BSPhysObject prim)
+    {
+        return GetBodyAndShape(forceRebuild, sim, prim, null, null);
+    }
+
     // Track another user of a body.
     // We presume the caller has allocated the body.
     // Bodies only have one user so the body is just put into the world if not already there.
@@ -126,13 +138,13 @@ public sealed class BSShapeCollection : IDisposable
     {
         lock (m_collectionActivityLock)
         {
-            DetailLog("{0},BSShapeCollection.ReferenceBody,newBody,body={1}", body.ID, body);
+            if (DDetail) DetailLog("{0},BSShapeCollection.ReferenceBody,newBody,body={1}", body.ID, body);
             PhysicsScene.TaintedObject(inTaintTime, "BSShapeCollection.ReferenceBody", delegate()
             {
-                if (!BulletSimAPI.IsInWorld2(body.ptr))
+                if (!PhysicsScene.PE.IsInWorld(PhysicsScene.World, body))
                 {
-                    BulletSimAPI.AddObjectToWorld2(PhysicsScene.World.ptr, body.ptr);
-                    DetailLog("{0},BSShapeCollection.ReferenceBody,addedToWorld,ref={1}", body.ID, body);
+                    PhysicsScene.PE.AddObjectToWorld(PhysicsScene.World, body);
+                    if (DDetail) DetailLog("{0},BSShapeCollection.ReferenceBody,addedToWorld,ref={1}", body.ID, body);
                 }
             });
         }
@@ -142,27 +154,27 @@ public sealed class BSShapeCollection : IDisposable
     // Called when releasing use of a BSBody. BSShape is handled separately.
     public void DereferenceBody(BulletBody body, bool inTaintTime, BodyDestructionCallback bodyCallback )
     {
-        if (body.ptr == IntPtr.Zero)
+        if (!body.HasPhysicalBody)
             return;
 
         lock (m_collectionActivityLock)
         {
             PhysicsScene.TaintedObject(inTaintTime, "BSShapeCollection.DereferenceBody", delegate()
             {
-                DetailLog("{0},BSShapeCollection.DereferenceBody,DestroyingBody,body={1},inTaintTime={2}",
+                if (DDetail) DetailLog("{0},BSShapeCollection.DereferenceBody,DestroyingBody,body={1},inTaintTime={2}",
                                             body.ID, body, inTaintTime);
                 // If the caller needs to know the old body is going away, pass the event up.
                 if (bodyCallback != null) bodyCallback(body);
 
-                if (BulletSimAPI.IsInWorld2(body.ptr))
+                if (PhysicsScene.PE.IsInWorld(PhysicsScene.World, body))
                 {
-                    BulletSimAPI.RemoveObjectFromWorld2(PhysicsScene.World.ptr, body.ptr);
-                    DetailLog("{0},BSShapeCollection.DereferenceBody,removingFromWorld. Body={1}", body.ID, body);
+                    PhysicsScene.PE.RemoveObjectFromWorld(PhysicsScene.World, body);
+                    if (DDetail) DetailLog("{0},BSShapeCollection.DereferenceBody,removingFromWorld. Body={1}", body.ID, body);
                 }
 
                 // Zero any reference to the shape so it is not freed when the body is deleted.
-                BulletSimAPI.SetCollisionShape2(PhysicsScene.World.ptr, body.ptr, IntPtr.Zero);
-                BulletSimAPI.DestroyObject2(PhysicsScene.World.ptr, body.ptr);
+                PhysicsScene.PE.SetCollisionShape(PhysicsScene.World, body, null);
+                PhysicsScene.PE.DestroyObject(PhysicsScene.World, body);
             });
         }
     }
@@ -184,17 +196,17 @@ public sealed class BSShapeCollection : IDisposable
                 {
                     // There is an existing instance of this mesh.
                     meshDesc.referenceCount++;
-                    DetailLog("{0},BSShapeCollection.ReferenceShape,existingMesh,key={1},cnt={2}",
+                    if (DDetail) DetailLog("{0},BSShapeCollection.ReferenceShape,existingMesh,key={1},cnt={2}",
                                 BSScene.DetailLogZero, shape.shapeKey.ToString("X"), meshDesc.referenceCount);
                 }
                 else
                 {
                     // This is a new reference to a mesh
-                    meshDesc.ptr = shape.ptr;
+                    meshDesc.shape = shape.Clone();
                     meshDesc.shapeKey = shape.shapeKey;
                     // We keep a reference to the underlying IMesh data so a hull can be built
                     meshDesc.referenceCount = 1;
-                    DetailLog("{0},BSShapeCollection.ReferenceShape,newMesh,key={1},cnt={2}",
+                    if (DDetail) DetailLog("{0},BSShapeCollection.ReferenceShape,newMesh,key={1},cnt={2}",
                                 BSScene.DetailLogZero, shape.shapeKey.ToString("X"), meshDesc.referenceCount);
                     ret = true;
                 }
@@ -207,16 +219,16 @@ public sealed class BSShapeCollection : IDisposable
                 {
                     // There is an existing instance of this hull.
                     hullDesc.referenceCount++;
-                    DetailLog("{0},BSShapeCollection.ReferenceShape,existingHull,key={1},cnt={2}",
+                    if (DDetail) DetailLog("{0},BSShapeCollection.ReferenceShape,existingHull,key={1},cnt={2}",
                                 BSScene.DetailLogZero, shape.shapeKey.ToString("X"), hullDesc.referenceCount);
                 }
                 else
                 {
                     // This is a new reference to a hull
-                    hullDesc.ptr = shape.ptr;
+                    hullDesc.shape = shape.Clone();
                     hullDesc.shapeKey = shape.shapeKey;
                     hullDesc.referenceCount = 1;
-                    DetailLog("{0},BSShapeCollection.ReferenceShape,newHull,key={1},cnt={2}",
+                    if (DDetail) DetailLog("{0},BSShapeCollection.ReferenceShape,newHull,key={1},cnt={2}",
                                 BSScene.DetailLogZero, shape.shapeKey.ToString("X"), hullDesc.referenceCount);
                     ret = true;
 
@@ -236,20 +248,20 @@ public sealed class BSShapeCollection : IDisposable
     // Release the usage of a shape.
     public void DereferenceShape(BulletShape shape, bool inTaintTime, ShapeDestructionCallback shapeCallback)
     {
-        if (shape.ptr == IntPtr.Zero)
+        if (!shape.HasPhysicalShape)
             return;
 
         PhysicsScene.TaintedObject(inTaintTime, "BSShapeCollection.DereferenceShape", delegate()
         {
-            if (shape.ptr != IntPtr.Zero)
+            if (shape.HasPhysicalShape)
             {
                 if (shape.isNativeShape)
                 {
                     // Native shapes are not tracked and are released immediately
-                    DetailLog("{0},BSShapeCollection.DereferenceShape,deleteNativeShape,ptr={1},taintTime={2}",
-                                    BSScene.DetailLogZero, shape.ptr.ToString("X"), inTaintTime);
+                    if (DDetail) DetailLog("{0},BSShapeCollection.DereferenceShape,deleteNativeShape,ptr={1},taintTime={2}",
+                                    BSScene.DetailLogZero, shape.AddrString, inTaintTime);
                     if (shapeCallback != null) shapeCallback(shape);
-                    BulletSimAPI.DeleteCollisionShape2(PhysicsScene.World.ptr, shape.ptr);
+                    PhysicsScene.PE.DeleteCollisionShape(PhysicsScene.World, shape);
                 }
                 else
                 {
@@ -286,7 +298,7 @@ public sealed class BSShapeCollection : IDisposable
             if (shapeCallback != null) shapeCallback(shape);
             meshDesc.lastReferenced = System.DateTime.Now;
             Meshes[shape.shapeKey] = meshDesc;
-            DetailLog("{0},BSShapeCollection.DereferenceMesh,shape={1},refCnt={2}",
+            if (DDetail) DetailLog("{0},BSShapeCollection.DereferenceMesh,shape={1},refCnt={2}",
                                 BSScene.DetailLogZero, shape, meshDesc.referenceCount);
 
         }
@@ -307,7 +319,7 @@ public sealed class BSShapeCollection : IDisposable
 
             hullDesc.lastReferenced = System.DateTime.Now;
             Hulls[shape.shapeKey] = hullDesc;
-            DetailLog("{0},BSShapeCollection.DereferenceHull,shape={1},refCnt={2}",
+            if (DDetail) DetailLog("{0},BSShapeCollection.DereferenceHull,shape={1},refCnt={2}",
                     BSScene.DetailLogZero, shape, hullDesc.referenceCount);
         }
     }
@@ -320,57 +332,56 @@ public sealed class BSShapeCollection : IDisposable
     // Called at taint-time.
     private void DereferenceCompound(BulletShape shape, ShapeDestructionCallback shapeCallback)
     {
-        if (!BulletSimAPI.IsCompound2(shape.ptr))
+        if (!PhysicsScene.PE.IsCompound(shape))
         {
             // Failed the sanity check!!
             PhysicsScene.Logger.ErrorFormat("{0} Attempt to free a compound shape that is not compound!! type={1}, ptr={2}",
-                                        LogHeader, shape.type, shape.ptr.ToString("X"));
-            DetailLog("{0},BSShapeCollection.DereferenceCompound,notACompoundShape,type={1},ptr={2}",
-                                        BSScene.DetailLogZero, shape.type, shape.ptr.ToString("X"));
+                                        LogHeader, shape.type, shape.AddrString);
+            if (DDetail) DetailLog("{0},BSShapeCollection.DereferenceCompound,notACompoundShape,type={1},ptr={2}",
+                                        BSScene.DetailLogZero, shape.type, shape.AddrString);
             return;
         }
 
-        int numChildren = BulletSimAPI.GetNumberOfCompoundChildren2(shape.ptr);
-        DetailLog("{0},BSShapeCollection.DereferenceCompound,shape={1},children={2}", BSScene.DetailLogZero, shape, numChildren);
+        int numChildren = PhysicsScene.PE.GetNumberOfCompoundChildren(shape);
+        if (DDetail) DetailLog("{0},BSShapeCollection.DereferenceCompound,shape={1},children={2}", BSScene.DetailLogZero, shape, numChildren);
 
         for (int ii = numChildren - 1; ii >= 0; ii--)
         {
-            IntPtr childShape = BulletSimAPI.RemoveChildShapeFromCompoundShapeIndex2(shape.ptr, ii);
+            BulletShape childShape = PhysicsScene.PE.RemoveChildShapeFromCompoundShapeIndex(shape, ii);
             DereferenceAnonCollisionShape(childShape);
         }
-        BulletSimAPI.DeleteCollisionShape2(PhysicsScene.World.ptr, shape.ptr);
+        PhysicsScene.PE.DeleteCollisionShape(PhysicsScene.World, shape);
     }
 
     // Sometimes we have a pointer to a collision shape but don't know what type it is.
     // Figure out type and call the correct dereference routine.
     // Called at taint-time.
-    private void DereferenceAnonCollisionShape(IntPtr cShape)
+    private void DereferenceAnonCollisionShape(BulletShape shapeInfo)
     {
         MeshDesc meshDesc;
         HullDesc hullDesc;
 
-        BulletShape shapeInfo = new BulletShape(cShape);
-        if (TryGetMeshByPtr(cShape, out meshDesc))
+        if (TryGetMeshByPtr(shapeInfo, out meshDesc))
         {
             shapeInfo.type = BSPhysicsShapeType.SHAPE_MESH;
             shapeInfo.shapeKey = meshDesc.shapeKey;
         }
         else
         {
-            if (TryGetHullByPtr(cShape, out hullDesc))
+            if (TryGetHullByPtr(shapeInfo, out hullDesc))
             {
                 shapeInfo.type = BSPhysicsShapeType.SHAPE_HULL;
                 shapeInfo.shapeKey = hullDesc.shapeKey;
             }
             else
             {
-                if (BulletSimAPI.IsCompound2(cShape))
+                if (PhysicsScene.PE.IsCompound(shapeInfo))
                 {
                     shapeInfo.type = BSPhysicsShapeType.SHAPE_COMPOUND;
                 }
                 else
                 {
-                    if (BulletSimAPI.IsNativeShape2(cShape))
+                    if (PhysicsScene.PE.IsNativeShape(shapeInfo))
                     {
                         shapeInfo.isNativeShape = true;
                         shapeInfo.type = BSPhysicsShapeType.SHAPE_BOX; // (technically, type doesn't matter)
@@ -379,7 +390,7 @@ public sealed class BSShapeCollection : IDisposable
             }
         }
 
-        DetailLog("{0},BSShapeCollection.DereferenceAnonCollisionShape,shape={1}", BSScene.DetailLogZero, shapeInfo);
+        if (DDetail) DetailLog("{0},BSShapeCollection.DereferenceAnonCollisionShape,shape={1}", BSScene.DetailLogZero, shapeInfo);
 
         if (shapeInfo.type != BSPhysicsShapeType.SHAPE_UNKNOWN)
         {
@@ -388,7 +399,7 @@ public sealed class BSShapeCollection : IDisposable
         else
         {
             PhysicsScene.Logger.ErrorFormat("{0} Could not decypher shape type. Region={1}, addr={2}",
-                                    LogHeader, PhysicsScene.RegionName, cShape.ToString("X"));
+                                    LogHeader, PhysicsScene.RegionName, shapeInfo.AddrString);
         }
     }
 
@@ -408,19 +419,18 @@ public sealed class BSShapeCollection : IDisposable
         if (!haveShape && prim.PreferredPhysicalShape == BSPhysicsShapeType.SHAPE_CAPSULE)
         {
             // an avatar capsule is close to a native shape (it is not shared)
-            ret = GetReferenceToNativeShape(prim, BSPhysicsShapeType.SHAPE_CAPSULE,
-                            FixedShapeKey.KEY_CAPSULE, shapeCallback);
-            DetailLog("{0},BSShapeCollection.CreateGeom,avatarCapsule,shape={1}", prim.LocalID, prim.PhysShape);
+            GetReferenceToNativeShape(prim, BSPhysicsShapeType.SHAPE_CAPSULE, FixedShapeKey.KEY_CAPSULE, shapeCallback);
+            if (DDetail) DetailLog("{0},BSShapeCollection.CreateGeom,avatarCapsule,shape={1}", prim.LocalID, prim.PhysShape);
             ret = true;
             haveShape = true;
         }
 
         // Compound shapes are handled special as they are rebuilt from scratch.
-        // This isn't too great a hardship since most of the child shapes will already been created.
+        // This isn't too great a hardship since most of the child shapes will have already been created.
         if (!haveShape && prim.PreferredPhysicalShape == BSPhysicsShapeType.SHAPE_COMPOUND)
         {
             ret = GetReferenceToCompoundShape(prim, shapeCallback);
-            DetailLog("{0},BSShapeCollection.CreateGeom,compoundShape,shape={1}", prim.LocalID, prim.PhysShape);
+            if (DDetail) DetailLog("{0},BSShapeCollection.CreateGeom,compoundShape,shape={1}", prim.LocalID, prim.PhysShape);
             haveShape = true;
         }
 
@@ -433,7 +443,7 @@ public sealed class BSShapeCollection : IDisposable
     }
 
     // Create a mesh/hull shape or a native shape if 'nativeShapePossible' is 'true'.
-    private bool CreateGeomNonSpecial(bool forceRebuild, BSPhysObject prim, ShapeDestructionCallback shapeCallback)
+    public bool CreateGeomNonSpecial(bool forceRebuild, BSPhysObject prim, ShapeDestructionCallback shapeCallback)
     {
         bool ret = false;
         bool haveShape = false;
@@ -443,8 +453,9 @@ public sealed class BSShapeCollection : IDisposable
         // If the prim attributes are simple, this could be a simple Bullet native shape
         if (!haveShape
                 && pbs != null
+                && !pbs.SculptEntry
                 && nativeShapePossible
-                && ((pbs.SculptEntry && !PhysicsScene.ShouldMeshSculptedPrim)
+                && ((pbs.SculptEntry && !BSParam.ShouldMeshSculptedPrim)
                     || (pbs.ProfileBegin == 0 && pbs.ProfileEnd == 0
                         && pbs.ProfileHollow == 0
                         && pbs.PathTwist == 0 && pbs.PathTwistBegin == 0
@@ -453,19 +464,27 @@ public sealed class BSShapeCollection : IDisposable
                         && pbs.PathScaleX == 100 && pbs.PathScaleY == 100
                         && pbs.PathShearX == 0 && pbs.PathShearY == 0) ) )
         {
+            // Get the scale of any existing shape so we can see if the new shape is same native type and same size.
+            OMV.Vector3 scaleOfExistingShape = OMV.Vector3.Zero;
+            if (prim.PhysShape.HasPhysicalShape)
+                scaleOfExistingShape = PhysicsScene.PE.GetLocalScaling(prim.PhysShape);
+
+            if (DDetail) DetailLog("{0},BSShapeCollection.CreateGeom,maybeNative,force={1},primScale={2},primSize={3},primShape={4}",
+                        prim.LocalID, forceRebuild, prim.Scale, prim.Size, prim.PhysShape.type);
+
             // It doesn't look like Bullet scales spheres so make sure the scales are all equal
             if ((pbs.ProfileShape == ProfileShape.HalfCircle && pbs.PathCurve == (byte)Extrusion.Curve1)
                                 && pbs.Scale.X == pbs.Scale.Y && pbs.Scale.Y == pbs.Scale.Z)
             {
                 haveShape = true;
                 if (forceRebuild
-                        || prim.Scale != prim.Size
+                        || prim.Scale != scaleOfExistingShape
                         || prim.PhysShape.type != BSPhysicsShapeType.SHAPE_SPHERE
                         )
                 {
                     ret = GetReferenceToNativeShape(prim, BSPhysicsShapeType.SHAPE_SPHERE,
                                             FixedShapeKey.KEY_SPHERE, shapeCallback);
-                    DetailLog("{0},BSShapeCollection.CreateGeom,sphere,force={1},shape={2}",
+                    if (DDetail) DetailLog("{0},BSShapeCollection.CreateGeom,sphere,force={1},shape={2}",
                                         prim.LocalID, forceRebuild, prim.PhysShape);
                 }
             }
@@ -473,13 +492,13 @@ public sealed class BSShapeCollection : IDisposable
             {
                 haveShape = true;
                 if (forceRebuild
-                        || prim.Scale != prim.Size
+                        || prim.Scale != scaleOfExistingShape
                         || prim.PhysShape.type != BSPhysicsShapeType.SHAPE_BOX
                         )
                 {
                     ret = GetReferenceToNativeShape( prim, BSPhysicsShapeType.SHAPE_BOX,
                                             FixedShapeKey.KEY_BOX, shapeCallback);
-                    DetailLog("{0},BSShapeCollection.CreateGeom,box,force={1},shape={2}",
+                    if (DDetail) DetailLog("{0},BSShapeCollection.CreateGeom,box,force={1},shape={2}",
                                         prim.LocalID, forceRebuild, prim.PhysShape);
                 }
             }
@@ -500,17 +519,17 @@ public sealed class BSShapeCollection : IDisposable
         bool ret = false;
         // Note that if it's a native shape, the check for physical/non-physical is not
         //     made. Native shapes work in either case.
-        if (prim.IsPhysical && PhysicsScene.ShouldUseHullsForPhysicalObjects)
+        if (prim.IsPhysical && BSParam.ShouldUseHullsForPhysicalObjects)
         {
             // Update prim.BSShape to reference a hull of this shape.
             ret = GetReferenceToHull(prim,shapeCallback);
-            DetailLog("{0},BSShapeCollection.CreateGeom,hull,shape={1},key={2}",
+            if (DDetail) DetailLog("{0},BSShapeCollection.CreateGeom,hull,shape={1},key={2}",
                                     prim.LocalID, prim.PhysShape, prim.PhysShape.shapeKey.ToString("X"));
         }
         else
         {
             ret = GetReferenceToMesh(prim, shapeCallback);
-            DetailLog("{0},BSShapeCollection.CreateGeom,mesh,shape={1},key={2}",
+            if (DDetail) DetailLog("{0},BSShapeCollection.CreateGeom,mesh,shape={1},key={2}",
                                     prim.LocalID, prim.PhysShape, prim.PhysShape.shapeKey.ToString("X"));
         }
         return ret;
@@ -528,9 +547,10 @@ public sealed class BSShapeCollection : IDisposable
         BulletShape newShape = BuildPhysicalNativeShape(prim, shapeType, shapeKey);
 
         // Don't need to do a 'ReferenceShape()' here because native shapes are not shared.
-        DetailLog("{0},BSShapeCollection.AddNativeShapeToPrim,create,newshape={1},scale={2}",
+        if (DDetail) DetailLog("{0},BSShapeCollection.AddNativeShapeToPrim,create,newshape={1},scale={2}",
                                 prim.LocalID, newShape, prim.Scale);
 
+        // native shapes are scaled by Bullet
         prim.PhysShape = newShape;
         return true;
     }
@@ -550,20 +570,17 @@ public sealed class BSShapeCollection : IDisposable
 
         if (shapeType == BSPhysicsShapeType.SHAPE_CAPSULE)
         {
-            // The proper scale has been calculated in the prim.
-            newShape = new BulletShape(
-                        BulletSimAPI.BuildCapsuleShape2(PhysicsScene.World.ptr, 1f, 1f, prim.Scale)
-                        , shapeType);
-            DetailLog("{0},BSShapeCollection.BuiletPhysicalNativeShape,capsule,scale={1}", prim.LocalID, prim.Scale);
+
+            newShape = PhysicsScene.PE.BuildCapsuleShape(PhysicsScene.World, 1f, 1f, prim.Scale);
+            if (DDetail) DetailLog("{0},BSShapeCollection.BuiletPhysicalNativeShape,capsule,scale={1}", prim.LocalID, prim.Scale);
         }
         else
         {
             // Native shapes are scaled in Bullet so set the scaling to the size
-            prim.Scale = prim.Size;
-            nativeShapeData.Scale = prim.Scale;
-            newShape = new BulletShape(BulletSimAPI.BuildNativeShape2(PhysicsScene.World.ptr, nativeShapeData), shapeType);
+            newShape = PhysicsScene.PE.BuildNativeShape(PhysicsScene.World, nativeShapeData);
+
         }
-        if (newShape.ptr == IntPtr.Zero)
+        if (!newShape.HasPhysicalShape)
         {
             PhysicsScene.Logger.ErrorFormat("{0} BuildPhysicalNativeShape failed. ID={1}, shape={2}",
                                     LogHeader, prim.LocalID, shapeType);
@@ -580,7 +597,7 @@ public sealed class BSShapeCollection : IDisposable
     // Called at taint-time!
     private bool GetReferenceToMesh(BSPhysObject prim, ShapeDestructionCallback shapeCallback)
     {
-        BulletShape newShape = new BulletShape(IntPtr.Zero);
+        BulletShape newShape = new BulletShape();
 
         float lod;
         System.UInt64 newMeshKey = ComputeShapeKey(prim.Size, prim.BaseShape, out lod);
@@ -589,7 +606,7 @@ public sealed class BSShapeCollection : IDisposable
         if (newMeshKey == prim.PhysShape.shapeKey && prim.PhysShape.type == BSPhysicsShapeType.SHAPE_MESH)
             return false;
 
-        DetailLog("{0},BSShapeCollection.GetReferenceToMesh,create,oldKey={1},newKey={2}",
+        if (DDetail) DetailLog("{0},BSShapeCollection.GetReferenceToMesh,create,oldKey={1},newKey={2}",
                                 prim.LocalID, prim.PhysShape.shapeKey.ToString("X"), newMeshKey.ToString("X"));
 
         // Since we're recreating new, get rid of the reference to the previous shape
@@ -601,8 +618,6 @@ public sealed class BSShapeCollection : IDisposable
 
         ReferenceShape(newShape);
 
-        // meshes are already scaled by the meshmerizer
-        prim.Scale = new OMV.Vector3(1f, 1f, 1f);
         prim.PhysShape = newShape;
 
         return true;        // 'true' means a new shape has been added to this prim
@@ -610,18 +625,18 @@ public sealed class BSShapeCollection : IDisposable
 
     private BulletShape CreatePhysicalMesh(string objName, System.UInt64 newMeshKey, PrimitiveBaseShape pbs, OMV.Vector3 size, float lod)
     {
+        BulletShape newShape = new BulletShape();
         IMesh meshData = null;
-        IntPtr meshPtr = IntPtr.Zero;
+
         MeshDesc meshDesc;
         if (Meshes.TryGetValue(newMeshKey, out meshDesc))
         {
             // If the mesh has already been built just use it.
-            meshPtr = meshDesc.ptr;
+            newShape = meshDesc.shape.Clone();
         }
         else
         {
-            // Pass false for physicalness as this creates some sort of bounding box which we don't need
-            meshData = PhysicsScene.mesher.CreateMesh(objName, pbs, size, lod, false);
+            meshData = PhysicsScene.mesher.CreateMesh(objName, pbs, size, lod, true, false, false, false);
 
             if (meshData != null)
             {
@@ -640,11 +655,10 @@ public sealed class BSShapeCollection : IDisposable
                 // m_log.DebugFormat("{0}: BSShapeCollection.CreatePhysicalMesh: calling CreateMesh. lid={1}, key={2}, indices={3}, vertices={4}",
                 //                  LogHeader, prim.LocalID, newMeshKey, indices.Length, vertices.Count);
 
-                meshPtr = BulletSimAPI.CreateMeshShape2(PhysicsScene.World.ptr,
+                newShape = PhysicsScene.PE.CreateMeshShape(PhysicsScene.World,
                                     indices.GetLength(0), indices, vertices.Count, verticesAsFloats);
             }
         }
-        BulletShape newShape = new BulletShape(meshPtr, BSPhysicsShapeType.SHAPE_MESH);
         newShape.shapeKey = newMeshKey;
 
         return newShape;
@@ -663,7 +677,7 @@ public sealed class BSShapeCollection : IDisposable
         if (newHullKey == prim.PhysShape.shapeKey && prim.PhysShape.type == BSPhysicsShapeType.SHAPE_HULL)
             return false;
 
-        DetailLog("{0},BSShapeCollection.GetReferenceToHull,create,oldKey={1},newKey={2}",
+        if (DDetail) DetailLog("{0},BSShapeCollection.GetReferenceToHull,create,oldKey={1},newKey={2}",
                         prim.LocalID, prim.PhysShape.shapeKey.ToString("X"), newHullKey.ToString("X"));
 
         // Remove usage of the previous shape.
@@ -674,8 +688,6 @@ public sealed class BSShapeCollection : IDisposable
 
         ReferenceShape(newShape);
 
-        // hulls are already scaled by the meshmerizer
-        prim.Scale = new OMV.Vector3(1f, 1f, 1f);
         prim.PhysShape = newShape;
         return true;        // 'true' means a new shape has been added to this prim
     }
@@ -684,18 +696,20 @@ public sealed class BSShapeCollection : IDisposable
     private BulletShape CreatePhysicalHull(string objName, System.UInt64 newHullKey, PrimitiveBaseShape pbs, OMV.Vector3 size, float lod)
     {
 
+        BulletShape newShape = new BulletShape();
         IntPtr hullPtr = IntPtr.Zero;
+
         HullDesc hullDesc;
         if (Hulls.TryGetValue(newHullKey, out hullDesc))
         {
             // If the hull shape already is created, just use it.
-            hullPtr = hullDesc.ptr;
+            newShape = hullDesc.shape.Clone();
         }
         else
         {
             // Build a new hull in the physical world
-            // Pass false for physicalness as this creates some sort of bounding box which we don't need
-            IMesh meshData = PhysicsScene.mesher.CreateMesh(objName, pbs, size, lod, false);
+            // Pass true for physicalness as this creates some sort of bounding box which we don't need
+            IMesh meshData = PhysicsScene.mesher.CreateMesh(objName, pbs, size, lod, true, false, false, false);
             if (meshData != null)
             {
 
@@ -777,14 +791,13 @@ public sealed class BSShapeCollection : IDisposable
                     }
                 }
                 // create the hull data structure in Bullet
-                hullPtr = BulletSimAPI.CreateHullShape2(PhysicsScene.World.ptr, hullCount, convHulls);
+                newShape = PhysicsScene.PE.CreateHullShape(PhysicsScene.World, hullCount, convHulls);
             }
         }
 
-        BulletShape newShape = new BulletShape(hullPtr, BSPhysicsShapeType.SHAPE_HULL);
         newShape.shapeKey = newHullKey;
 
-        return newShape;        // 'true' means a new shape has been added to this prim
+        return newShape;
     }
 
     // Callback from convex hull creater with a newly created hull.
@@ -803,13 +816,13 @@ public sealed class BSShapeCollection : IDisposable
         // Don't need to do this as the shape is freed when the new root shape is created below.
         // DereferenceShape(prim.PhysShape, true, shapeCallback);
 
-        BulletShape cShape = new BulletShape(
-            BulletSimAPI.CreateCompoundShape2(PhysicsScene.World.ptr, false), BSPhysicsShapeType.SHAPE_COMPOUND);
+
+        BulletShape cShape = PhysicsScene.PE.CreateCompoundShape(PhysicsScene.World, false);
 
         // Create the shape for the root prim and add it to the compound shape. Cannot be a native shape.
         CreateGeomMeshOrHull(prim, shapeCallback);
-        BulletSimAPI.AddChildShapeToCompoundShape2(cShape.ptr, prim.PhysShape.ptr, OMV.Vector3.Zero, OMV.Quaternion.Identity);
-        DetailLog("{0},BSShapeCollection.GetReferenceToCompoundShape,addRootPrim,compShape={1},rootShape={2}",
+        PhysicsScene.PE.AddChildShapeToCompoundShape(cShape, prim.PhysShape, OMV.Vector3.Zero, OMV.Quaternion.Identity);
+        if (DDetail) DetailLog("{0},BSShapeCollection.GetReferenceToCompoundShape,addRootPrim,compShape={1},rootShape={2}",
                                     prim.LocalID, cShape, prim.PhysShape);
 
         prim.PhysShape = cShape;
@@ -822,14 +835,14 @@ public sealed class BSShapeCollection : IDisposable
     private System.UInt64 ComputeShapeKey(OMV.Vector3 size, PrimitiveBaseShape pbs, out float retLod)
     {
         // level of detail based on size and type of the object
-        float lod = PhysicsScene.MeshLOD;
+        float lod = BSParam.MeshLOD;
         if (pbs.SculptEntry)
-            lod = PhysicsScene.SculptLOD;
+            lod = BSParam.SculptLOD;
 
         // Mega prims usually get more detail because one can interact with shape approximations at this size.
         float maxAxis = Math.Max(size.X, Math.Max(size.Y, size.Z));
-        if (maxAxis > PhysicsScene.MeshMegaPrimThreshold)
-            lod = PhysicsScene.MeshMegaPrimLOD;
+        if (maxAxis > BSParam.MeshMegaPrimThreshold)
+            lod = BSParam.MeshMegaPrimLOD;
 
         retLod = lod;
         return pbs.GetMeshKey(size, lod);
@@ -851,7 +864,7 @@ public sealed class BSShapeCollection : IDisposable
     private BulletShape VerifyMeshCreated(BulletShape newShape, BSPhysObject prim)
     {
         // If the shape was successfully created, nothing more to do
-        if (newShape.ptr != IntPtr.Zero)
+        if (newShape.HasPhysicalShape)
             return newShape;
 
         // If this mesh has an underlying asset and we have not failed getting it before, fetch the asset
@@ -904,19 +917,19 @@ public sealed class BSShapeCollection : IDisposable
     // Updates prim.BSBody with the information about the new body if one is created.
     // Returns 'true' if an object was actually created.
     // Called at taint-time.
-    private bool CreateBody(bool forceRebuild, BSPhysObject prim, BulletSim sim, BulletShape shape,
+    private bool CreateBody(bool forceRebuild, BSPhysObject prim, BulletWorld sim, BulletShape shape,
                             BodyDestructionCallback bodyCallback)
     {
         bool ret = false;
 
         // the mesh, hull or native shape must have already been created in Bullet
-        bool mustRebuild = (prim.PhysBody.ptr == IntPtr.Zero);
+        bool mustRebuild = !prim.PhysBody.HasPhysicalBody;
 
         // If there is an existing body, verify it's of an acceptable type.
         // If not a solid object, body is a GhostObject. Otherwise a RigidBody.
         if (!mustRebuild)
         {
-            CollisionObjectTypes bodyType = (CollisionObjectTypes)BulletSimAPI.GetBodyType2(prim.PhysBody.ptr);
+            CollisionObjectTypes bodyType = (CollisionObjectTypes)PhysicsScene.PE.GetBodyType(prim.PhysBody);
             if (prim.IsSolid && bodyType != CollisionObjectTypes.CO_RIGID_BODY
                 || !prim.IsSolid && bodyType != CollisionObjectTypes.CO_GHOST_OBJECT)
             {
@@ -931,20 +944,16 @@ public sealed class BSShapeCollection : IDisposable
             DereferenceBody(prim.PhysBody, true, bodyCallback);
 
             BulletBody aBody;
-            IntPtr bodyPtr = IntPtr.Zero;
             if (prim.IsSolid)
             {
-                bodyPtr = BulletSimAPI.CreateBodyFromShape2(sim.ptr, shape.ptr,
-                                        prim.LocalID, prim.RawPosition, prim.RawOrientation);
-                DetailLog("{0},BSShapeCollection.CreateBody,mesh,ptr={1}", prim.LocalID, bodyPtr.ToString("X"));
+                aBody = PhysicsScene.PE.CreateBodyFromShape(sim, shape, prim.LocalID, prim.RawPosition, prim.RawOrientation);
+                if (DDetail) DetailLog("{0},BSShapeCollection.CreateBody,mesh,body={1}", prim.LocalID, aBody);
             }
             else
             {
-                bodyPtr = BulletSimAPI.CreateGhostFromShape2(sim.ptr, shape.ptr,
-                                        prim.LocalID, prim.RawPosition, prim.RawOrientation);
-                DetailLog("{0},BSShapeCollection.CreateBody,ghost,ptr={1}", prim.LocalID, bodyPtr.ToString("X"));
+                aBody = PhysicsScene.PE.CreateGhostFromShape(sim, shape, prim.LocalID, prim.RawPosition, prim.RawOrientation);
+                if (DDetail) DetailLog("{0},BSShapeCollection.CreateBody,ghost,body={1}", prim.LocalID, aBody);
             }
-            aBody = new BulletBody(prim.LocalID, bodyPtr);
 
             ReferenceBody(aBody, true);
 
@@ -956,13 +965,13 @@ public sealed class BSShapeCollection : IDisposable
         return ret;
     }
 
-    private bool TryGetMeshByPtr(IntPtr addr, out MeshDesc outDesc)
+    private bool TryGetMeshByPtr(BulletShape shape, out MeshDesc outDesc)
     {
         bool ret = false;
         MeshDesc foundDesc = new MeshDesc();
         foreach (MeshDesc md in Meshes.Values)
         {
-            if (md.ptr == addr)
+            if (md.shape.ReferenceSame(shape))
             {
                 foundDesc = md;
                 ret = true;
@@ -974,13 +983,13 @@ public sealed class BSShapeCollection : IDisposable
         return ret;
     }
 
-    private bool TryGetHullByPtr(IntPtr addr, out HullDesc outDesc)
+    private bool TryGetHullByPtr(BulletShape shape, out HullDesc outDesc)
     {
         bool ret = false;
         HullDesc foundDesc = new HullDesc();
         foreach (HullDesc hd in Hulls.Values)
         {
-            if (hd.ptr == addr)
+            if (hd.shape.ReferenceSame(shape))
             {
                 foundDesc = hd;
                 ret = true;
diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSShapes.cs b/OpenSim/Region/Physics/BulletSPlugin/BSShapes.cs
index 96cd55e..ee18379 100755
--- a/OpenSim/Region/Physics/BulletSPlugin/BSShapes.cs
+++ b/OpenSim/Region/Physics/BulletSPlugin/BSShapes.cs
@@ -27,24 +27,19 @@
 
 using System;
 using System.Collections.Generic;
-using System.Linq;
 using System.Text;
 
+using OMV = OpenMetaverse;
+
 namespace OpenSim.Region.Physics.BulletSPlugin
 {
 public abstract class BSShape
 {
-    public IntPtr ptr { get; set; }
-    public BSPhysicsShapeType type { get; set; }
-    public System.UInt64 key { get; set; }
     public int referenceCount { get; set; }
     public DateTime lastReferenced { get; set; }
 
     public BSShape()
     {
-        ptr = IntPtr.Zero;
-        type = BSPhysicsShapeType.SHAPE_UNKNOWN;
-        key = 0;
         referenceCount = 0;
         lastReferenced = DateTime.Now;
     }
@@ -63,7 +58,7 @@ public abstract class BSShape
         }
 
         // Compound shapes are handled special as they are rebuilt from scratch.
-        // This isn't too great a hardship since most of the child shapes will already been created.
+        // This isn't too great a hardship since most of the child shapes will have already been created.
         if (ret == null  && prim.PreferredPhysicalShape == BSPhysicsShapeType.SHAPE_COMPOUND)
         {
             // Getting a reference to a compound shape gets you the compound shape with the root prim shape added
@@ -71,6 +66,14 @@ public abstract class BSShape
             physicsScene.DetailLog("{0},BSShapeCollection.CreateGeom,compoundShape,shape={1}", prim.LocalID, ret);
         }
 
+        // Avatars have their own unique shape
+        if (ret == null  && prim.PreferredPhysicalShape == BSPhysicsShapeType.SHAPE_AVATAR)
+        {
+            // Getting a reference to a compound shape gets you the compound shape with the root prim shape added
+            ret = BSShapeAvatar.GetReference(prim);
+            physicsScene.DetailLog("{0},BSShapeCollection.CreateGeom,avatarShape,shape={1}", prim.LocalID, ret);
+        }
+
         if (ret == null)
             ret = GetShapeReferenceNonSpecial(physicsScene, forceRebuild, prim);
 
@@ -91,15 +94,17 @@ public abstract class BSShape
     // All shapes have a static call to get a reference to the physical shape
     // protected abstract static BSShape GetReference();
 
+    // Returns a string for debugging that uniquily identifies the memory used by this instance
+    public virtual string AddrString
+    {
+        get { return "unknown"; }
+    }
+
     public override string ToString()
     {
         StringBuilder buff = new StringBuilder();
         buff.Append("<p=");
-        buff.Append(ptr.ToString("X"));
-        buff.Append(",s=");
-        buff.Append(type.ToString());
-        buff.Append(",k=");
-        buff.Append(key.ToString("X"));
+        buff.Append(AddrString);
         buff.Append(",c=");
         buff.Append(referenceCount.ToString());
         buff.Append(">");
@@ -126,7 +131,8 @@ public class BSShapeNative : BSShape
                     BSPhysicsShapeType shapeType, FixedShapeKey shapeKey) 
     {
         // Native shapes are not shared and are always built anew.
-        return new BSShapeNative(physicsScene, prim, shapeType, shapeKey);
+        //return new BSShapeNative(physicsScene, prim, shapeType, shapeKey);
+        return null;
     }
 
     private BSShapeNative(BSScene physicsScene, BSPhysObject prim,
@@ -141,14 +147,15 @@ public class BSShapeNative : BSShape
         nativeShapeData.HullKey = (ulong)shapeKey;
 
        
+        /*
         if (shapeType == BSPhysicsShapeType.SHAPE_CAPSULE)
         {
-            ptr = BulletSimAPI.BuildCapsuleShape2(physicsScene.World.ptr, 1f, 1f, prim.Scale);
+            ptr = PhysicsScene.PE.BuildCapsuleShape(physicsScene.World, 1f, 1f, prim.Scale);
             physicsScene.DetailLog("{0},BSShapeCollection.BuiletPhysicalNativeShape,capsule,scale={1}", prim.LocalID, prim.Scale);
         }
         else
         {
-            ptr = BulletSimAPI.BuildNativeShape2(physicsScene.World.ptr, nativeShapeData);
+            ptr = PhysicsScene.PE.BuildNativeShape(physicsScene.World, nativeShapeData);
         }
         if (ptr == IntPtr.Zero)
         {
@@ -157,15 +164,18 @@ public class BSShapeNative : BSShape
         }
         type = shapeType;
         key = (UInt64)shapeKey;
+         */
     }
     // Make this reference to the physical shape go away since native shapes are not shared.
     public override void Dereference(BSScene physicsScene)
     {
+        /*
         // Native shapes are not tracked and are released immediately
         physicsScene.DetailLog("{0},BSShapeCollection.DereferenceShape,deleteNativeShape,shape={1}", BSScene.DetailLogZero, this);
-        BulletSimAPI.DeleteCollisionShape2(physicsScene.World.ptr, ptr);
+        PhysicsScene.PE.DeleteCollisionShape(physicsScene.World, this);
         ptr = IntPtr.Zero;
         // Garbage collection will free up this instance.
+         */
     }
 }
 
@@ -205,4 +215,143 @@ public class BSShapeCompound : BSShape
     }
     public override void Dereference(BSScene physicsScene) { }
 }
+
+public class BSShapeAvatar : BSShape
+{
+    private static string LogHeader = "[BULLETSIM SHAPE AVATAR]";
+    public BSShapeAvatar() : base()
+    {
+    }
+    public static BSShape GetReference(BSPhysObject prim) 
+    { 
+        return new BSShapeNull();
+    }
+    public override void Dereference(BSScene physicsScene) { }
+
+    // From the front:
+    //     A---A
+    //    /     \
+    //   B-------B
+    //  /         \        +Z
+    // C-----------C        |
+    // \           /   -Y --+-- +Y
+    //  \         /         |
+    //   \       /         -Z
+    //    D-----D
+    //     \   /
+    //      E-E
+
+    // From the top A and E are just lines.
+    //              B, C and D are hexagons:
+    //
+    //     C1--C2            +X
+    //    /      \            |
+    //  C0        C3     -Y --+-- +Y
+    //    \      /            |
+    //     C5--C4            -X
+
+    // Zero goes directly through the middle so the offsets are from that middle axis
+    //     and up and down from a middle horizon (A and E are the same distance from the zero).
+    // The height, width and depth is one. All scaling is done by the simulator.
+
+    // Z component -- how far the level is from the middle zero
+    private const float Aup = 0.5f;
+    private const float Bup = 0.4f;
+    private const float Cup = 0.3f;
+    private const float Dup = -0.4f;
+    private const float Eup = -0.5f;
+
+    // Y component -- distance from center to x0 and x3
+    private const float Awid = 0.25f;
+    private const float Bwid = 0.3f;
+    private const float Cwid = 0.5f;
+    private const float Dwid = 0.3f;
+    private const float Ewid = 0.2f;
+
+    // Y component -- distance from center to x1, x2, x4 and x5
+    private const float Afwid = 0.0f;
+    private const float Bfwid = 0.2f;
+    private const float Cfwid = 0.4f;
+    private const float Dfwid = 0.2f;
+    private const float Efwid = 0.0f;
+
+    // X component -- distance from zero to the front or back of a level
+    private const float Adep = 0f;
+    private const float Bdep = 0.3f;
+    private const float Cdep = 0.5f;
+    private const float Ddep = 0.2f;
+    private const float Edep = 0f;
+
+    private OMV.Vector3[] avatarVertices = {
+           new OMV.Vector3( 0.0f, -Awid,  Aup),   // A0
+           new OMV.Vector3( 0.0f, +Awid,  Aup),   // A3
+
+           new OMV.Vector3( 0.0f, -Bwid,  Bup),   // B0
+           new OMV.Vector3(+Bdep, -Bfwid, Bup),   // B1
+           new OMV.Vector3(+Bdep, +Bfwid, Bup),   // B2
+           new OMV.Vector3( 0.0f, +Bwid,  Bup),   // B3
+           new OMV.Vector3(-Bdep, +Bfwid, Bup),   // B4
+           new OMV.Vector3(-Bdep, -Bfwid, Bup),   // B5
+
+           new OMV.Vector3( 0.0f, -Cwid,  Cup),   // C0
+           new OMV.Vector3(+Cdep, -Cfwid, Cup),   // C1
+           new OMV.Vector3(+Cdep, +Cfwid, Cup),   // C2
+           new OMV.Vector3( 0.0f, +Cwid,  Cup),   // C3
+           new OMV.Vector3(-Cdep, +Cfwid, Cup),   // C4
+           new OMV.Vector3(-Cdep, -Cfwid, Cup),   // C5
+
+           new OMV.Vector3( 0.0f, -Dwid,  Dup),   // D0
+           new OMV.Vector3(+Ddep, -Dfwid, Dup),   // D1
+           new OMV.Vector3(+Ddep, +Dfwid, Dup),   // D2
+           new OMV.Vector3( 0.0f, +Dwid,  Dup),   // D3
+           new OMV.Vector3(-Ddep, +Dfwid, Dup),   // D4
+           new OMV.Vector3(-Ddep, -Dfwid, Dup),   // D5
+
+           new OMV.Vector3( 0.0f, -Ewid,  Eup),   // E0
+           new OMV.Vector3( 0.0f, +Ewid,  Eup),   // E3
+    };
+
+    // Offsets of the vertices in the vertices array
+    private enum Ind : int
+    {
+        A0, A3,
+        B0, B1, B2, B3, B4, B5,
+        C0, C1, C2, C3, C4, C5,
+        D0, D1, D2, D3, D4, D5,
+        E0, E3
+    }
+
+    // Comments specify trianges and quads in clockwise direction
+    private Ind[] avatarIndices = {
+        Ind.A0, Ind.B0, Ind.B1,                         // A0,B0,B1
+        Ind.A0, Ind.B1, Ind.B2, Ind.B2, Ind.A3, Ind.A0, // A0,B1,B2,A3
+        Ind.A3, Ind.B2, Ind.B3,                         // A3,B2,B3
+        Ind.A3, Ind.B3, Ind.B4,                         // A3,B3,B4
+        Ind.A3, Ind.B4, Ind.B5, Ind.B5, Ind.A0, Ind.A3, // A3,B4,B5,A0
+        Ind.A0, Ind.B5, Ind.B0,                         // A0,B5,B0
+
+        Ind.B0, Ind.C0, Ind.C1, Ind.C1, Ind.B1, Ind.B0, // B0,C0,C1,B1
+        Ind.B1, Ind.C1, Ind.C2, Ind.C2, Ind.B2, Ind.B1, // B1,C1,C2,B2
+        Ind.B2, Ind.C2, Ind.C3, Ind.C3, Ind.B3, Ind.B2, // B2,C2,C3,B3
+        Ind.B3, Ind.C3, Ind.C4, Ind.C4, Ind.B4, Ind.B3, // B3,C3,C4,B4
+        Ind.B4, Ind.C4, Ind.C5, Ind.C5, Ind.B5, Ind.B4, // B4,C4,C5,B5
+        Ind.B5, Ind.C5, Ind.C0, Ind.C0, Ind.B0, Ind.B5, // B5,C5,C0,B0
+
+        Ind.C0, Ind.D0, Ind.D1, Ind.D1, Ind.C1, Ind.C0, // C0,D0,D1,C1
+        Ind.C1, Ind.D1, Ind.D2, Ind.D2, Ind.C2, Ind.C1, // C1,D1,D2,C2
+        Ind.C2, Ind.D2, Ind.D3, Ind.D3, Ind.C3, Ind.C2, // C2,D2,D3,C3
+        Ind.C3, Ind.D3, Ind.D4, Ind.D4, Ind.C4, Ind.C3, // C3,D3,D4,C4
+        Ind.C4, Ind.D4, Ind.D5, Ind.D5, Ind.C5, Ind.C4, // C4,D4,D5,C5
+        Ind.C5, Ind.D5, Ind.D0, Ind.D0, Ind.C0, Ind.C5, // C5,D5,D0,C0
+
+        Ind.E0, Ind.D0, Ind.D1,                         // E0,D0,D1
+        Ind.E0, Ind.D1, Ind.D2, Ind.D2, Ind.E3, Ind.E0, // E0,D1,D2,E3
+        Ind.E3, Ind.D2, Ind.D3,                         // E3,D2,D3
+        Ind.E3, Ind.D3, Ind.D4,                         // E3,D3,D4
+        Ind.E3, Ind.D4, Ind.D5, Ind.D5, Ind.E0, Ind.E3, // E3,D4,D5,E0
+        Ind.E0, Ind.D5, Ind.D0,                         // E0,D5,D0
+
+    };
+
+}
 }
diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSTerrainHeightmap.cs b/OpenSim/Region/Physics/BulletSPlugin/BSTerrainHeightmap.cs
index 3ca756c..e4fecc3 100755
--- a/OpenSim/Region/Physics/BulletSPlugin/BSTerrainHeightmap.cs
+++ b/OpenSim/Region/Physics/BulletSPlugin/BSTerrainHeightmap.cs
@@ -44,7 +44,7 @@ public sealed class BSTerrainHeightmap : BSTerrainPhys
 {
     static string LogHeader = "[BULLETSIM TERRAIN HEIGHTMAP]";
 
-    BulletHeightMapInfo m_mapInfo = null;
+    BulletHMapInfo m_mapInfo = null;
 
     // Constructor to build a default, flat heightmap terrain.
     public BSTerrainHeightmap(BSScene physicsScene, Vector3 regionBase, uint id, Vector3 regionSize)
@@ -58,7 +58,7 @@ public sealed class BSTerrainHeightmap : BSTerrainPhys
         {
             initialMap[ii] = BSTerrainManager.HEIGHT_INITIALIZATION;
         }
-        m_mapInfo = new BulletHeightMapInfo(id, initialMap, IntPtr.Zero);
+        m_mapInfo = new BulletHMapInfo(id, initialMap);
         m_mapInfo.minCoords = minTerrainCoords;
         m_mapInfo.maxCoords = maxTerrainCoords;
         m_mapInfo.terrainRegionBase = TerrainBase;
@@ -72,7 +72,7 @@ public sealed class BSTerrainHeightmap : BSTerrainPhys
                                                     Vector3 minCoords, Vector3 maxCoords)
         : base(physicsScene, regionBase, id)
     {
-        m_mapInfo = new BulletHeightMapInfo(id, initialMap, IntPtr.Zero);
+        m_mapInfo = new BulletHMapInfo(id, initialMap);
         m_mapInfo.minCoords = minCoords;
         m_mapInfo.maxCoords = maxCoords;
         m_mapInfo.minZ = minCoords.Z;
@@ -91,13 +91,11 @@ public sealed class BSTerrainHeightmap : BSTerrainPhys
     // Using the information in m_mapInfo, create the physical representation of the heightmap.
     private void BuildHeightmapTerrain()
     {
-        m_mapInfo.Ptr = BulletSimAPI.CreateHeightMapInfo2(PhysicsScene.World.ptr, m_mapInfo.ID,
-                                m_mapInfo.minCoords, m_mapInfo.maxCoords, 
-                                m_mapInfo.heightMap, BSTerrainManager.TERRAIN_COLLISION_MARGIN);
-
         // Create the terrain shape from the mapInfo
-        m_mapInfo.terrainShape = new BulletShape(BulletSimAPI.CreateTerrainShape2(m_mapInfo.Ptr),
-                                                    BSPhysicsShapeType.SHAPE_TERRAIN);
+        m_mapInfo.terrainShape = PhysicsScene.PE.CreateTerrainShape( m_mapInfo.ID, 
+                                new Vector3(m_mapInfo.sizeX, m_mapInfo.sizeY, 0), m_mapInfo.minZ, m_mapInfo.maxZ,
+                                m_mapInfo.heightMap, 1f, BSParam.TerrainCollisionMargin);
+
 
         // The terrain object initial position is at the center of the object
         Vector3 centerPos;
@@ -105,28 +103,26 @@ public sealed class BSTerrainHeightmap : BSTerrainPhys
         centerPos.Y = m_mapInfo.minCoords.Y + (m_mapInfo.sizeY / 2f);
         centerPos.Z = m_mapInfo.minZ + ((m_mapInfo.maxZ - m_mapInfo.minZ) / 2f);
 
-        m_mapInfo.terrainBody = new BulletBody(m_mapInfo.ID,
-                BulletSimAPI.CreateBodyWithDefaultMotionState2(m_mapInfo.terrainShape.ptr,
-                                            m_mapInfo.ID, centerPos, Quaternion.Identity));
+        m_mapInfo.terrainBody = PhysicsScene.PE.CreateBodyWithDefaultMotionState(m_mapInfo.terrainShape, 
+                                m_mapInfo.ID, centerPos, Quaternion.Identity);
 
         // Set current terrain attributes
-        BulletSimAPI.SetFriction2(m_mapInfo.terrainBody.ptr, PhysicsScene.Params.terrainFriction);
-        BulletSimAPI.SetHitFraction2(m_mapInfo.terrainBody.ptr, PhysicsScene.Params.terrainHitFraction);
-        BulletSimAPI.SetRestitution2(m_mapInfo.terrainBody.ptr, PhysicsScene.Params.terrainRestitution);
-        BulletSimAPI.SetCollisionFlags2(m_mapInfo.terrainBody.ptr, CollisionFlags.CF_STATIC_OBJECT);
+        PhysicsScene.PE.SetFriction(m_mapInfo.terrainBody, BSParam.TerrainFriction);
+        PhysicsScene.PE.SetHitFraction(m_mapInfo.terrainBody, BSParam.TerrainHitFraction);
+        PhysicsScene.PE.SetRestitution(m_mapInfo.terrainBody, BSParam.TerrainRestitution);
+        PhysicsScene.PE.SetCollisionFlags(m_mapInfo.terrainBody, CollisionFlags.CF_STATIC_OBJECT);
 
         // Return the new terrain to the world of physical objects
-        BulletSimAPI.AddObjectToWorld2(PhysicsScene.World.ptr, m_mapInfo.terrainBody.ptr);
+        PhysicsScene.PE.AddObjectToWorld(PhysicsScene.World, m_mapInfo.terrainBody);
 
         // redo its bounding box now that it is in the world
-        BulletSimAPI.UpdateSingleAabb2(PhysicsScene.World.ptr, m_mapInfo.terrainBody.ptr);
+        PhysicsScene.PE.UpdateSingleAabb(PhysicsScene.World, m_mapInfo.terrainBody);
 
-        BulletSimAPI.SetCollisionFilterMask2(m_mapInfo.terrainBody.ptr,
-                            (uint)CollisionFilterGroups.TerrainFilter,
-                            (uint)CollisionFilterGroups.TerrainMask);
+        m_mapInfo.terrainBody.collisionType = CollisionType.Terrain;
+        m_mapInfo.terrainBody.ApplyCollisionMask(PhysicsScene);
 
         // Make it so the terrain will not move or be considered for movement.
-        BulletSimAPI.ForceActivationState2(m_mapInfo.terrainBody.ptr, ActivationState.DISABLE_SIMULATION);
+        PhysicsScene.PE.ForceActivationState(m_mapInfo.terrainBody, ActivationState.DISABLE_SIMULATION);
 
         return;
     }
@@ -136,19 +132,18 @@ public sealed class BSTerrainHeightmap : BSTerrainPhys
     {
         if (m_mapInfo != null)
         {
-            if (m_mapInfo.terrainBody.ptr != IntPtr.Zero)
+            if (m_mapInfo.terrainBody.HasPhysicalBody)
             {
-                BulletSimAPI.RemoveObjectFromWorld2(PhysicsScene.World.ptr, m_mapInfo.terrainBody.ptr);
+                PhysicsScene.PE.RemoveObjectFromWorld(PhysicsScene.World, m_mapInfo.terrainBody);
                 // Frees both the body and the shape.
-                BulletSimAPI.DestroyObject2(PhysicsScene.World.ptr, m_mapInfo.terrainBody.ptr);
-                BulletSimAPI.ReleaseHeightMapInfo2(m_mapInfo.Ptr);
+                PhysicsScene.PE.DestroyObject(PhysicsScene.World, m_mapInfo.terrainBody);
             }
         }
         m_mapInfo = null;
     }
 
     // The passed position is relative to the base of the region.
-    public override float GetHeightAtXYZ(Vector3 pos)
+    public override float GetTerrainHeightAtXYZ(Vector3 pos)
     {
         float ret = BSTerrainManager.HEIGHT_GETHEIGHT_RET;
 
@@ -166,5 +161,11 @@ public sealed class BSTerrainHeightmap : BSTerrainPhys
         }
         return ret;
     }
+
+    // The passed position is relative to the base of the region.
+    public override float GetWaterLevelAtXYZ(Vector3 pos)
+    {
+        return PhysicsScene.SimpleWaterLevel;
+    }
 }
 }
diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSTerrainManager.cs b/OpenSim/Region/Physics/BulletSPlugin/BSTerrainManager.cs
index 23fcfd3..2e9db39 100755
--- a/OpenSim/Region/Physics/BulletSPlugin/BSTerrainManager.cs
+++ b/OpenSim/Region/Physics/BulletSPlugin/BSTerrainManager.cs
@@ -62,11 +62,12 @@ public abstract class BSTerrainPhys : IDisposable
         ID = id;
     }
     public abstract void Dispose();
-    public abstract float GetHeightAtXYZ(Vector3 pos);
+    public abstract float GetTerrainHeightAtXYZ(Vector3 pos);
+    public abstract float GetWaterLevelAtXYZ(Vector3 pos);
 }
 
 // ==========================================================================================
-public sealed class BSTerrainManager
+public sealed class BSTerrainManager : IDisposable
 {
     static string LogHeader = "[BULLETSIM TERRAIN MANAGER]";
 
@@ -75,13 +76,12 @@ public sealed class BSTerrainManager
     public const float HEIGHT_INITIALIZATION = 24.987f;
     public const float HEIGHT_INITIAL_LASTHEIGHT = 24.876f;
     public const float HEIGHT_GETHEIGHT_RET = 24.765f;
+    public const float WATER_HEIGHT_GETHEIGHT_RET = 19.998f;
 
     // If the min and max height are equal, we reduce the min by this
     //    amount to make sure that a bounding box is built for the terrain.
     public const float HEIGHT_EQUAL_FUDGE = 0.2f;
 
-    public const float TERRAIN_COLLISION_MARGIN = 0.0f;
-
     // Until the whole simulator is changed to pass us the region size, we rely on constants.
     public Vector3 DefaultRegionSize = new Vector3(Constants.RegionSize, Constants.RegionSize, Constants.RegionHeight);
 
@@ -122,25 +122,28 @@ public sealed class BSTerrainManager
         MegaRegionParentPhysicsScene = null;
     }
 
+    public void Dispose()
+    {
+        ReleaseGroundPlaneAndTerrain();
+    }
+
     // Create the initial instance of terrain and the underlying ground plane.
     // This is called from the initialization routine so we presume it is
     //    safe to call Bullet in real time. We hope no one is moving prims around yet.
     public void CreateInitialGroundPlaneAndTerrain()
     {
         // The ground plane is here to catch things that are trying to drop to negative infinity
-        BulletShape groundPlaneShape = new BulletShape(
-                    BulletSimAPI.CreateGroundPlaneShape2(BSScene.GROUNDPLANE_ID, 1f, TERRAIN_COLLISION_MARGIN),
-                    BSPhysicsShapeType.SHAPE_GROUNDPLANE);
-        m_groundPlane = new BulletBody(BSScene.GROUNDPLANE_ID,
-                        BulletSimAPI.CreateBodyWithDefaultMotionState2(groundPlaneShape.ptr, BSScene.GROUNDPLANE_ID,
-                                                            Vector3.Zero, Quaternion.Identity));
-        BulletSimAPI.AddObjectToWorld2(PhysicsScene.World.ptr, m_groundPlane.ptr);
-        BulletSimAPI.UpdateSingleAabb2(PhysicsScene.World.ptr, m_groundPlane.ptr);
+        BulletShape groundPlaneShape = PhysicsScene.PE.CreateGroundPlaneShape(BSScene.GROUNDPLANE_ID, 1f, BSParam.TerrainCollisionMargin);
+        m_groundPlane = PhysicsScene.PE.CreateBodyWithDefaultMotionState(groundPlaneShape, 
+                                        BSScene.GROUNDPLANE_ID, Vector3.Zero, Quaternion.Identity);
+
+        PhysicsScene.PE.AddObjectToWorld(PhysicsScene.World, m_groundPlane);
+        PhysicsScene.PE.UpdateSingleAabb(PhysicsScene.World, m_groundPlane);
         // Ground plane does not move
-        BulletSimAPI.ForceActivationState2(m_groundPlane.ptr, ActivationState.DISABLE_SIMULATION);
+        PhysicsScene.PE.ForceActivationState(m_groundPlane, ActivationState.DISABLE_SIMULATION);
         // Everything collides with the ground plane.
-        BulletSimAPI.SetCollisionFilterMask2(m_groundPlane.ptr,
-                        (uint)CollisionFilterGroups.GroundPlaneFilter, (uint)CollisionFilterGroups.GroundPlaneMask);
+        m_groundPlane.collisionType = CollisionType.Groundplane;
+        m_groundPlane.ApplyCollisionMask(PhysicsScene);
 
         // Build an initial terrain and put it in the world. This quickly gets replaced by the real region terrain.
         BSTerrainPhys initialTerrain = new BSTerrainHeightmap(PhysicsScene, Vector3.Zero, BSScene.TERRAIN_ID, DefaultRegionSize);
@@ -150,13 +153,13 @@ public sealed class BSTerrainManager
     // Release all the terrain structures we might have allocated
     public void ReleaseGroundPlaneAndTerrain()
     {
-        if (m_groundPlane.ptr != IntPtr.Zero)
+        if (m_groundPlane.HasPhysicalBody)
         {
-            if (BulletSimAPI.RemoveObjectFromWorld2(PhysicsScene.World.ptr, m_groundPlane.ptr))
+            if (PhysicsScene.PE.RemoveObjectFromWorld(PhysicsScene.World, m_groundPlane))
             {
-                BulletSimAPI.DestroyObject2(PhysicsScene.World.ptr, m_groundPlane.ptr);
+                PhysicsScene.PE.DestroyObject(PhysicsScene.World, m_groundPlane);
             }
-            m_groundPlane.ptr = IntPtr.Zero;
+            m_groundPlane.Clear();
         }
 
         ReleaseTerrain();
@@ -165,17 +168,22 @@ public sealed class BSTerrainManager
     // Release all the terrain we have allocated
     public void ReleaseTerrain()
     {
-        foreach (KeyValuePair<Vector3, BSTerrainPhys> kvp in m_terrains)
+        lock (m_terrains)
         {
-            kvp.Value.Dispose();
+            foreach (KeyValuePair<Vector3, BSTerrainPhys> kvp in m_terrains)
+            {
+                kvp.Value.Dispose();
+            }
+            m_terrains.Clear();
         }
-        m_terrains.Clear();
     }
 
     // The simulator wants to set a new heightmap for the terrain.
     public void SetTerrain(float[] heightMap) {
         float[] localHeightMap = heightMap;
-        PhysicsScene.TaintedObject("TerrainManager.SetTerrain", delegate()
+        // If there are multiple requests for changes to the same terrain between ticks,
+        //      only do that last one.
+        PhysicsScene.PostTaintObject("TerrainManager.SetTerrain-"+ m_worldOffset.ToString(), 0, delegate()
         {
             if (m_worldOffset != Vector3.Zero && MegaRegionParentPhysicsScene != null)
             {
@@ -211,6 +219,7 @@ public sealed class BSTerrainManager
     //     terrain shape is created and added to the body.
     //     This call is most often used to update the heightMap and parameters of the terrain.
     // (The above does suggest that some simplification/refactoring is in order.)
+    // Called during taint-time.
     private void UpdateTerrain(uint id, float[] heightMap, 
                             Vector3 minCoords, Vector3 maxCoords, bool inTaintTime)
     {
@@ -220,7 +229,7 @@ public sealed class BSTerrainManager
         // Find high and low points of passed heightmap.
         // The min and max passed in is usually the area objects can be in (maximum
         //     object height, for instance). The terrain wants the bounding box for the
-        //     terrain so we replace passed min and max Z with the actual terrain min/max Z.
+        //     terrain so replace passed min and max Z with the actual terrain min/max Z.
         float minZ = float.MaxValue;
         float maxZ = float.MinValue;
         foreach (float height in heightMap)
@@ -238,15 +247,15 @@ public sealed class BSTerrainManager
 
         Vector3 terrainRegionBase = new Vector3(minCoords.X, minCoords.Y, 0f);
 
-        BSTerrainPhys terrainPhys;
-        if (m_terrains.TryGetValue(terrainRegionBase, out terrainPhys))
+        lock (m_terrains)
         {
-            // There is already a terrain in this spot. Free the old and build the new.
-            DetailLog("{0},UpdateTerrain:UpdateExisting,call,id={1},base={2},minC={3},maxC={4}",
-                            BSScene.DetailLogZero, id, terrainRegionBase, minCoords, minCoords);
-
-            PhysicsScene.TaintedObject(inTaintTime, "BSScene.UpdateTerrain:UpdateExisting", delegate()
+            BSTerrainPhys terrainPhys;
+            if (m_terrains.TryGetValue(terrainRegionBase, out terrainPhys))
             {
+                // There is already a terrain in this spot. Free the old and build the new.
+                DetailLog("{0},UpdateTerrain:UpdateExisting,call,id={1},base={2},minC={3},maxC={4}",
+                                BSScene.DetailLogZero, id, terrainRegionBase, minCoords, minCoords);
+
                 // Remove old terrain from the collection
                 m_terrains.Remove(terrainRegionBase);
                 // Release any physical memory it may be using.
@@ -271,35 +280,24 @@ public sealed class BSTerrainManager
                     // I hate doing this, but just bail
                     return;
                 }
-            });
-        }
-        else
-        {
-            // We don't know about this terrain so either we are creating a new terrain or
-            //    our mega-prim child is giving us a new terrain to add to the phys world
-
-            // if this is a child terrain, calculate a unique terrain id
-            uint newTerrainID = id;
-            if (newTerrainID >= BSScene.CHILDTERRAIN_ID)
-                newTerrainID = ++m_terrainCount;
-
-            float[] heightMapX = heightMap;
-            Vector3 minCoordsX = minCoords;
-            Vector3 maxCoordsX = maxCoords;
+            }
+            else
+            {
+                // We don't know about this terrain so either we are creating a new terrain or
+                //    our mega-prim child is giving us a new terrain to add to the phys world
 
-            DetailLog("{0},UpdateTerrain:NewTerrain,call,id={1}, minC={2}, maxC={3}",
-                            BSScene.DetailLogZero, newTerrainID, minCoords, minCoords);
+                // if this is a child terrain, calculate a unique terrain id
+                uint newTerrainID = id;
+                if (newTerrainID >= BSScene.CHILDTERRAIN_ID)
+                    newTerrainID = ++m_terrainCount;
 
-            // Code that must happen at taint-time
-            PhysicsScene.TaintedObject(inTaintTime, "BSScene.UpdateTerrain:NewTerrain", delegate()
-            {
-                DetailLog("{0},UpdateTerrain:NewTerrain,taint,baseX={1},baseY={2}", 
-                                            BSScene.DetailLogZero, minCoordsX.X, minCoordsX.Y);
+                DetailLog("{0},UpdateTerrain:NewTerrain,taint,newID={1},minCoord={2},maxCoord={3}",
+                                            BSScene.DetailLogZero, newTerrainID, minCoords, minCoords);
                 BSTerrainPhys newTerrainPhys = BuildPhysicalTerrain(terrainRegionBase, id, heightMap, minCoords, maxCoords);
                 m_terrains.Add(terrainRegionBase, newTerrainPhys);
 
                 m_terrainModified = true;
-            });
+            }
         }
     }
 
@@ -308,9 +306,9 @@ public sealed class BSTerrainManager
     {
         PhysicsScene.Logger.DebugFormat("{0} Terrain for {1}/{2} created with {3}", 
                                             LogHeader, PhysicsScene.RegionName, terrainRegionBase, 
-                                            (BSTerrainPhys.TerrainImplementation)PhysicsScene.Params.terrainImplementation);
+                                            (BSTerrainPhys.TerrainImplementation)BSParam.TerrainImplementation);
         BSTerrainPhys newTerrainPhys = null;
-        switch ((int)PhysicsScene.Params.terrainImplementation)
+        switch ((int)BSParam.TerrainImplementation)
         {
             case (int)BSTerrainPhys.TerrainImplementation.Heightmap:
                 newTerrainPhys = new BSTerrainHeightmap(PhysicsScene, terrainRegionBase, id,
@@ -323,14 +321,21 @@ public sealed class BSTerrainManager
             default:
                 PhysicsScene.Logger.ErrorFormat("{0} Bad terrain implementation specified. Type={1}/{2},Region={3}/{4}",
                                             LogHeader, 
-                                            (int)PhysicsScene.Params.terrainImplementation, 
-                                            PhysicsScene.Params.terrainImplementation,
+                                            (int)BSParam.TerrainImplementation, 
+                                            BSParam.TerrainImplementation,
                                             PhysicsScene.RegionName, terrainRegionBase);
                 break;
         }
         return newTerrainPhys;
     }
 
+    // Return 'true' of this position is somewhere in known physical terrain space
+    public bool IsWithinKnownTerrain(Vector3 pos)
+    {
+        Vector3 terrainBaseXYZ;
+        BSTerrainPhys physTerrain;
+        return GetTerrainPhysicalAtXYZ(pos, out physTerrain, out terrainBaseXYZ);
+    }
 
     // Given an X and Y, find the height of the terrain.
     // Since we could be handling multiple terrains for a mega-region,
@@ -341,40 +346,74 @@ public sealed class BSTerrainManager
     private float lastHeightTX = 999999f;
     private float lastHeightTY = 999999f;
     private float lastHeight = HEIGHT_INITIAL_LASTHEIGHT;
-    public float GetTerrainHeightAtXYZ(Vector3 loc)
+    public float GetTerrainHeightAtXYZ(Vector3 pos)
     {
-        float tX = loc.X;
-        float tY = loc.Y;
+        float tX = pos.X;
+        float tY = pos.Y;
         // You'd be surprized at the number of times this routine is called
         //    with the same parameters as last time.
-        if (!m_terrainModified && lastHeightTX == tX && lastHeightTY == tY)
+        if (!m_terrainModified && (lastHeightTX == tX) && (lastHeightTY == tY))
             return lastHeight;
+        m_terrainModified = false;
 
         lastHeightTX = tX;
         lastHeightTY = tY;
         float ret = HEIGHT_GETHEIGHT_RET;
 
-        int offsetX = ((int)(tX / (int)DefaultRegionSize.X)) * (int)DefaultRegionSize.X;
-        int offsetY = ((int)(tY / (int)DefaultRegionSize.Y)) * (int)DefaultRegionSize.Y;
-        Vector3 terrainBaseXYZ = new Vector3(offsetX, offsetY, 0f);
-
+        Vector3 terrainBaseXYZ;
         BSTerrainPhys physTerrain;
-        if (m_terrains.TryGetValue(terrainBaseXYZ, out physTerrain))
+        if (GetTerrainPhysicalAtXYZ(pos, out physTerrain, out terrainBaseXYZ))
         {
-            ret = physTerrain.GetHeightAtXYZ(loc - terrainBaseXYZ);
-            DetailLog("{0},BSTerrainManager.GetTerrainHeightAtXYZ,loc={1},base={2},height={3}",
-                                             BSScene.DetailLogZero, loc, terrainBaseXYZ, ret);
+            ret = physTerrain.GetTerrainHeightAtXYZ(pos - terrainBaseXYZ);
         }
         else
         {
             PhysicsScene.Logger.ErrorFormat("{0} GetTerrainHeightAtXY: terrain not found: region={1}, x={2}, y={3}",
                     LogHeader, PhysicsScene.RegionName, tX, tY);
+            DetailLog("{0},BSTerrainManager.GetTerrainHeightAtXYZ,terrainNotFound,pos={1},base={2}",
+                                BSScene.DetailLogZero, pos, terrainBaseXYZ);
         }
-        m_terrainModified = false;
+
         lastHeight = ret;
         return ret;
     }
 
+    public float GetWaterLevelAtXYZ(Vector3 pos)
+    {
+        float ret = WATER_HEIGHT_GETHEIGHT_RET;
+
+        Vector3 terrainBaseXYZ;
+        BSTerrainPhys physTerrain;
+        if (GetTerrainPhysicalAtXYZ(pos, out physTerrain, out terrainBaseXYZ))
+        {
+            ret = physTerrain.GetWaterLevelAtXYZ(pos);
+        }
+        else
+        {
+            PhysicsScene.Logger.ErrorFormat("{0} GetWaterHeightAtXY: terrain not found: pos={1}, terrainBase={2}, height={3}",
+                    LogHeader, PhysicsScene.RegionName, pos, terrainBaseXYZ, ret);
+        }
+        return ret;
+    }
+
+    // Given an address, return 'true' of there is a description of that terrain and output
+    //    the descriptor class and the 'base' fo the addresses therein.
+    private bool GetTerrainPhysicalAtXYZ(Vector3 pos, out BSTerrainPhys outPhysTerrain, out Vector3 outTerrainBase)
+    {
+        int offsetX = ((int)(pos.X / (int)DefaultRegionSize.X)) * (int)DefaultRegionSize.X;
+        int offsetY = ((int)(pos.Y / (int)DefaultRegionSize.Y)) * (int)DefaultRegionSize.Y;
+        Vector3 terrainBaseXYZ = new Vector3(offsetX, offsetY, 0f);
+
+        BSTerrainPhys physTerrain = null;
+        lock (m_terrains)
+        {
+            m_terrains.TryGetValue(terrainBaseXYZ, out physTerrain);
+        }
+        outTerrainBase = terrainBaseXYZ;
+        outPhysTerrain = physTerrain;
+        return (physTerrain != null);
+    }
+
     // Although no one seems to check this, I do support combining.
     public bool SupportsCombining()
     {
diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSTerrainMesh.cs b/OpenSim/Region/Physics/BulletSPlugin/BSTerrainMesh.cs
index dca7150..8244f02 100755
--- a/OpenSim/Region/Physics/BulletSPlugin/BSTerrainMesh.cs
+++ b/OpenSim/Region/Physics/BulletSPlugin/BSTerrainMesh.cs
@@ -88,11 +88,11 @@ public sealed class BSTerrainMesh : BSTerrainPhys
             // Something is very messed up and a crash is in our future.
             return;
         }
+        PhysicsScene.DetailLog("{0},BSTerrainMesh.create,meshed,indices={1},indSz={2},vertices={3},vertSz={4}", 
+                                ID, indicesCount, indices.Length, verticesCount, vertices.Length);
 
-        m_terrainShape = new BulletShape(BulletSimAPI.CreateMeshShape2(PhysicsScene.World.ptr,
-                                        indicesCount, indices, verticesCount, vertices),
-                                        BSPhysicsShapeType.SHAPE_MESH);
-        if (m_terrainShape.ptr == IntPtr.Zero)
+        m_terrainShape = PhysicsScene.PE.CreateMeshShape(PhysicsScene.World, indicesCount, indices, verticesCount, vertices);
+        if (!m_terrainShape.HasPhysicalShape)
         {
             // DISASTER!!
             PhysicsScene.DetailLog("{0},BSTerrainMesh.create,failedCreationOfShape", ID);
@@ -104,8 +104,8 @@ public sealed class BSTerrainMesh : BSTerrainPhys
         Vector3 pos = regionBase;
         Quaternion rot = Quaternion.Identity;
 
-        m_terrainBody = new BulletBody(id, BulletSimAPI.CreateBodyWithDefaultMotionState2( m_terrainShape.ptr, ID, pos, rot));
-        if (m_terrainBody.ptr == IntPtr.Zero)
+        m_terrainBody = PhysicsScene.PE.CreateBodyWithDefaultMotionState(m_terrainShape, ID, pos, rot);
+        if (!m_terrainBody.HasPhysicalBody)
         {
             // DISASTER!!
             physicsScene.Logger.ErrorFormat("{0} Failed creation of terrain body! base={1}", LogHeader, TerrainBase);
@@ -114,39 +114,40 @@ public sealed class BSTerrainMesh : BSTerrainPhys
         }
 
         // Set current terrain attributes
-        BulletSimAPI.SetFriction2(m_terrainBody.ptr, PhysicsScene.Params.terrainFriction);
-        BulletSimAPI.SetHitFraction2(m_terrainBody.ptr, PhysicsScene.Params.terrainHitFraction);
-        BulletSimAPI.SetRestitution2(m_terrainBody.ptr, PhysicsScene.Params.terrainRestitution);
-        BulletSimAPI.SetCollisionFlags2(m_terrainBody.ptr, CollisionFlags.CF_STATIC_OBJECT);
+        PhysicsScene.PE.SetFriction(m_terrainBody, BSParam.TerrainFriction);
+        PhysicsScene.PE.SetHitFraction(m_terrainBody, BSParam.TerrainHitFraction);
+        PhysicsScene.PE.SetRestitution(m_terrainBody, BSParam.TerrainRestitution);
+        PhysicsScene.PE.SetCollisionFlags(m_terrainBody, CollisionFlags.CF_STATIC_OBJECT);
 
         // Static objects are not very massive.
-        BulletSimAPI.SetMassProps2(m_terrainBody.ptr, 0f, Vector3.Zero);
+        PhysicsScene.PE.SetMassProps(m_terrainBody, 0f, Vector3.Zero);
 
-        // Return the new terrain to the world of physical objects
-        BulletSimAPI.AddObjectToWorld2(PhysicsScene.World.ptr, m_terrainBody.ptr);
+        // Put the new terrain to the world of physical objects
+        PhysicsScene.PE.AddObjectToWorld(PhysicsScene.World, m_terrainBody);
 
-        // redo its bounding box now that it is in the world
-        BulletSimAPI.UpdateSingleAabb2(PhysicsScene.World.ptr, m_terrainBody.ptr);
+        // Redo its bounding box now that it is in the world
+        PhysicsScene.PE.UpdateSingleAabb(PhysicsScene.World, m_terrainBody);
 
-        BulletSimAPI.SetCollisionFilterMask2(m_terrainBody.ptr,
-                            (uint)CollisionFilterGroups.TerrainFilter,
-                            (uint)CollisionFilterGroups.TerrainMask);
+        m_terrainBody.collisionType = CollisionType.Terrain;
+        m_terrainBody.ApplyCollisionMask(PhysicsScene);
 
         // Make it so the terrain will not move or be considered for movement.
-        BulletSimAPI.ForceActivationState2(m_terrainBody.ptr, ActivationState.DISABLE_SIMULATION);
+        PhysicsScene.PE.ForceActivationState(m_terrainBody, ActivationState.DISABLE_SIMULATION);
     }
 
     public override void Dispose()
     {
-        if (m_terrainBody.ptr != IntPtr.Zero)
+        if (m_terrainBody.HasPhysicalBody)
         {
-            BulletSimAPI.RemoveObjectFromWorld2(PhysicsScene.World.ptr, m_terrainBody.ptr);
+            PhysicsScene.PE.RemoveObjectFromWorld(PhysicsScene.World, m_terrainBody);
             // Frees both the body and the shape.
-            BulletSimAPI.DestroyObject2(PhysicsScene.World.ptr, m_terrainBody.ptr);
+            PhysicsScene.PE.DestroyObject(PhysicsScene.World, m_terrainBody);
+            m_terrainBody.Clear();
+            m_terrainShape.Clear();
         }
     }
 
-    public override float GetHeightAtXYZ(Vector3 pos)
+    public override float GetTerrainHeightAtXYZ(Vector3 pos)
     {
         // For the moment use the saved heightmap to get the terrain height.
         // TODO: raycast downward to find the true terrain below the position.
@@ -167,6 +168,12 @@ public sealed class BSTerrainMesh : BSTerrainPhys
         return ret;
     }
 
+    // The passed position is relative to the base of the region.
+    public override float GetWaterLevelAtXYZ(Vector3 pos)
+    {
+        return PhysicsScene.SimpleWaterLevel;
+    }
+
     // Convert the passed heightmap to mesh information suitable for CreateMeshShape2().
     // Return 'true' if successfully created.
     public static bool ConvertHeightmapToMesh(
@@ -188,6 +195,11 @@ public sealed class BSTerrainMesh : BSTerrainPhys
         // Simple mesh creation which assumes magnification == 1.
         // TODO: do a more general solution that scales, adds new vertices and smoothes the result.
 
+        // Create an array of vertices that is sizeX+1 by sizeY+1 (note the loop
+        //    from zero to <= sizeX). The triangle indices are then generated as two triangles
+        //    per heightmap point. There are sizeX by sizeY of these squares. The extra row and
+        //    column of vertices are used to complete the triangles of the last row and column
+        //    of the heightmap.
         try
         {
             // One vertice per heightmap value plus the vertices off the top and bottom edge.
@@ -200,16 +212,18 @@ public sealed class BSTerrainMesh : BSTerrainPhys
             float magY = (float)sizeY / extentY;
             physicsScene.DetailLog("{0},BSTerrainMesh.ConvertHeightMapToMesh,totVert={1},totInd={2},extentBase={3},magX={4},magY={5}",
                                     BSScene.DetailLogZero, totalVertices, totalIndices, extentBase, magX, magY);
+            float minHeight = float.MaxValue;
             // Note that sizeX+1 vertices are created since there is land between this and the next region.
             for (int yy = 0; yy <= sizeY; yy++)
             {
-                for (int xx = 0; xx <= sizeX; xx++)     // Hint: the "<=" means we got through sizeX + 1 times
+                for (int xx = 0; xx <= sizeX; xx++)     // Hint: the "<=" means we go around sizeX + 1 times
                 {
                     int offset = yy * sizeX + xx;
-                    // Extend the height from the height from the last row or column
+                    // Extend the height with the height from the last row or column
                     if (yy == sizeY) offset -= sizeX;
                     if (xx == sizeX) offset -= 1;
                     float height = heightMap[offset];
+                    minHeight = Math.Min(minHeight, height);
                     vertices[verticesCount + 0] = (float)xx * magX + extentBase.X;
                     vertices[verticesCount + 1] = (float)yy * magY + extentBase.Y;
                     vertices[verticesCount + 2] = height + extentBase.Z;
@@ -217,14 +231,12 @@ public sealed class BSTerrainMesh : BSTerrainPhys
                 }
             }
             verticesCount = verticesCount / 3;
-            physicsScene.DetailLog("{0},BSTerrainMesh.ConvertHeightMapToMesh,completeVerts,verCount={1}", 
-                                            BSScene.DetailLogZero, verticesCount);
 
             for (int yy = 0; yy < sizeY; yy++)
             {
                 for (int xx = 0; xx < sizeX; xx++)
                 {
-                    int offset = yy * sizeX + xx;
+                    int offset = yy * (sizeX + 1) + xx;
                     // Each vertices is presumed to be the upper left corner of a box of two triangles
                     indices[indicesCount + 0] = offset;
                     indices[indicesCount + 1] = offset + 1;
@@ -235,8 +247,7 @@ public sealed class BSTerrainMesh : BSTerrainPhys
                     indicesCount += 6;
                 }
             }
-            physicsScene.DetailLog("{0},BSTerrainMesh.ConvertHeightMapToMesh,completeIndices,indCount={1}",   // DEEBUG DEBUG DEBUG
-                                                        LogHeader, indicesCount);                        // DEBUG
+
             ret = true;
         }
         catch (Exception e)
diff --git a/OpenSim/Region/Physics/BulletSPlugin/BulletSimAPI.cs b/OpenSim/Region/Physics/BulletSPlugin/BulletSimAPI.cs
deleted file mode 100644
index e60a760..0000000
--- a/OpenSim/Region/Physics/BulletSPlugin/BulletSimAPI.cs
+++ /dev/null
@@ -1,1015 +0,0 @@
-/*
- * Copyright (c) Contributors, http://opensimulator.org/
- * See CONTRIBUTORS.TXT for a full list of copyright holders.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyrightD
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of the OpenSimulator Project nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-using System;
-using System.Runtime.InteropServices;
-using System.Security;
-using System.Text;
-using OpenMetaverse;
-
-namespace OpenSim.Region.Physics.BulletSPlugin {
-
-// Classes to allow some type checking for the API
-// These hold pointers to allocated objects in the unmanaged space.
-
-// The physics engine controller class created at initialization
-public struct BulletSim
-{
-    public BulletSim(uint worldId, BSScene bss, IntPtr xx)
-    {
-        ptr = xx;
-        worldID = worldId;
-        physicsScene = bss;
-    }
-    public IntPtr ptr;
-    public uint worldID;
-    // The scene is only in here so very low level routines have a handle to print debug/error messages
-    public BSScene physicsScene;
-}
-
-// An allocated Bullet btRigidBody
-public struct BulletBody
-{
-    public BulletBody(uint id, IntPtr xx)
-    {
-        ID = id;
-        ptr = xx;
-        collisionFilter = 0;
-        collisionMask = 0;
-    }
-    public IntPtr ptr;
-    public uint ID;
-    public CollisionFilterGroups collisionFilter;
-    public CollisionFilterGroups collisionMask;
-    public override string ToString()
-    {
-        StringBuilder buff = new StringBuilder();
-        buff.Append("<id=");
-        buff.Append(ID.ToString());
-        buff.Append(",p=");
-        buff.Append(ptr.ToString("X"));
-        if (collisionFilter != 0 || collisionMask != 0)
-        {
-            buff.Append(",f=");
-            buff.Append(collisionFilter.ToString("X"));
-            buff.Append(",m=");
-            buff.Append(collisionMask.ToString("X"));
-        }
-        buff.Append(">");
-        return buff.ToString();
-    }
-}
-
-public struct BulletShape
-{
-    public BulletShape(IntPtr xx)
-    {
-        ptr = xx;
-        type=BSPhysicsShapeType.SHAPE_UNKNOWN;
-        shapeKey = (System.UInt64)FixedShapeKey.KEY_NONE;
-        isNativeShape = false;
-    }
-    public BulletShape(IntPtr xx, BSPhysicsShapeType typ)
-    {
-        ptr = xx;
-        type = typ;
-        shapeKey = 0;
-        isNativeShape = false;
-    }
-    public IntPtr ptr;
-    public BSPhysicsShapeType type;
-    public System.UInt64 shapeKey;
-    public bool isNativeShape;
-    public override string ToString()
-    {
-        StringBuilder buff = new StringBuilder();
-        buff.Append("<p=");
-        buff.Append(ptr.ToString("X"));
-        buff.Append(",s=");
-        buff.Append(type.ToString());
-        buff.Append(",k=");
-        buff.Append(shapeKey.ToString("X"));
-        buff.Append(",n=");
-        buff.Append(isNativeShape.ToString());
-        buff.Append(">");
-        return buff.ToString();
-    }
-}
-
-    // Constraint type values as defined by Bullet
-public enum ConstraintType : int
-{
-        POINT2POINT_CONSTRAINT_TYPE = 3,
-        HINGE_CONSTRAINT_TYPE,
-        CONETWIST_CONSTRAINT_TYPE,
-        D6_CONSTRAINT_TYPE,
-        SLIDER_CONSTRAINT_TYPE,
-        CONTACT_CONSTRAINT_TYPE,
-        D6_SPRING_CONSTRAINT_TYPE,
-        MAX_CONSTRAINT_TYPE
-}
-
-// An allocated Bullet btConstraint
-public struct BulletConstraint
-{
-    public BulletConstraint(IntPtr xx)
-    {
-        ptr = xx;
-    }
-    public IntPtr ptr;
-}
-
-// An allocated HeightMapThing which holds various heightmap info.
-// Made a class rather than a struct so there would be only one
-//      instance of this and C# will pass around pointers rather
-//      than making copies.
-public class BulletHeightMapInfo
-{
-    public BulletHeightMapInfo(uint id, float[] hm, IntPtr xx) {
-        ID = id;
-        Ptr = xx;
-        heightMap = hm;
-        terrainRegionBase = Vector3.Zero;
-        minCoords = new Vector3(100f, 100f, 25f);
-        maxCoords = new Vector3(101f, 101f, 26f);
-        minZ = maxZ = 0f;
-        sizeX = sizeY = 256f;
-    }
-    public uint ID;
-    public IntPtr Ptr;
-    public float[] heightMap;
-    public Vector3 terrainRegionBase;
-    public Vector3 minCoords;
-    public Vector3 maxCoords;
-    public float sizeX, sizeY;
-    public float minZ, maxZ;
-    public BulletShape terrainShape;
-    public BulletBody terrainBody;
-}
-
-// ===============================================================================
-[StructLayout(LayoutKind.Sequential)]
-public struct ConvexHull
-{
-        Vector3 Offset;
-        int VertexCount;
-        Vector3[] Vertices;
-}
-public enum BSPhysicsShapeType
-{
-        SHAPE_UNKNOWN   = 0,
-        SHAPE_CAPSULE   = 1,
-        SHAPE_BOX       = 2,
-        SHAPE_CONE      = 3,
-        SHAPE_CYLINDER  = 4,
-        SHAPE_SPHERE    = 5,
-        SHAPE_MESH      = 6,
-        SHAPE_HULL      = 7,
-    // following defined by BulletSim
-        SHAPE_GROUNDPLANE  = 20,
-        SHAPE_TERRAIN   = 21,
-        SHAPE_COMPOUND  = 22,
-        SHAPE_HEIGHTMAP = 23,
-};
-
-// The native shapes have predefined shape hash keys
-public enum FixedShapeKey : ulong
-{
-    KEY_NONE        = 0,
-    KEY_BOX         = 1,
-    KEY_SPHERE      = 2,
-    KEY_CONE        = 3,
-    KEY_CYLINDER    = 4,
-    KEY_CAPSULE     = 5,
-}
-
-[StructLayout(LayoutKind.Sequential)]
-public struct ShapeData
-{
-    public uint ID;
-    public BSPhysicsShapeType Type;
-    public Vector3 Position;
-    public Quaternion Rotation;
-    public Vector3 Velocity;
-    public Vector3 Scale;
-    public float Mass;
-    public float Buoyancy;
-    public System.UInt64 HullKey;
-    public System.UInt64 MeshKey;
-    public float Friction;
-    public float Restitution;
-    public float Collidable;    // true of things bump into this
-    public float Static;        // true if a static object. Otherwise gravity, etc.
-    public float Solid;         // true if object cannot be passed through
-    public Vector3 Size;
-
-    // note that bools are passed as floats since bool size changes by language and architecture
-    public const float numericTrue = 1f;
-    public const float numericFalse = 0f;
-}
-[StructLayout(LayoutKind.Sequential)]
-public struct SweepHit
-{
-    public uint ID;
-    public float Fraction;
-    public Vector3 Normal;
-    public Vector3 Point;
-}
-[StructLayout(LayoutKind.Sequential)]
-public struct RaycastHit
-{
-    public uint ID;
-    public float Fraction;
-    public Vector3 Normal;
-}
-[StructLayout(LayoutKind.Sequential)]
-public struct CollisionDesc
-{
-    public uint aID;
-    public uint bID;
-    public Vector3 point;
-    public Vector3 normal;
-}
-[StructLayout(LayoutKind.Sequential)]
-public struct EntityProperties
-{
-    public uint ID;
-    public Vector3 Position;
-    public Quaternion Rotation;
-    public Vector3 Velocity;
-    public Vector3 Acceleration;
-    public Vector3 RotationalVelocity;
-}
-
-// Format of this structure must match the definition in the C++ code
-[StructLayout(LayoutKind.Sequential)]
-public struct ConfigurationParameters
-{
-    public float defaultFriction;
-    public float defaultDensity;
-    public float defaultRestitution;
-    public float collisionMargin;
-    public float gravity;
-
-    public float linearDamping;
-    public float angularDamping;
-    public float deactivationTime;
-    public float linearSleepingThreshold;
-    public float angularSleepingThreshold;
-        public float ccdMotionThreshold;
-        public float ccdSweptSphereRadius;
-    public float contactProcessingThreshold;
-
-    public float terrainImplementation;
-    public float terrainFriction;
-    public float terrainHitFraction;
-    public float terrainRestitution;
-    public float avatarFriction;
-    public float avatarStandingFriction;
-    public float avatarDensity;
-    public float avatarRestitution;
-    public float avatarCapsuleWidth;
-    public float avatarCapsuleDepth;
-    public float avatarCapsuleHeight;
-        public float avatarContactProcessingThreshold;
-
-        public float maxPersistantManifoldPoolSize;
-        public float maxCollisionAlgorithmPoolSize;
-        public float shouldDisableContactPoolDynamicAllocation;
-        public float shouldForceUpdateAllAabbs;
-        public float shouldRandomizeSolverOrder;
-        public float shouldSplitSimulationIslands;
-        public float shouldEnableFrictionCaching;
-        public float numberOfSolverIterations;
-
-    public float linksetImplementation;
-    public float linkConstraintUseFrameOffset;
-    public float linkConstraintEnableTransMotor;
-    public float linkConstraintTransMotorMaxVel;
-    public float linkConstraintTransMotorMaxForce;
-    public float linkConstraintERP;
-    public float linkConstraintCFM;
-    public float linkConstraintSolverIterations;
-
-    public float physicsLoggingFrames;
-
-    public const float numericTrue = 1f;
-    public const float numericFalse = 0f;
-}
-
-
-// The states a bullet collision object can have
-public enum ActivationState : uint
-{
-    ACTIVE_TAG = 1,
-    ISLAND_SLEEPING,
-    WANTS_DEACTIVATION,
-    DISABLE_DEACTIVATION,
-    DISABLE_SIMULATION,
-}
-
-public enum CollisionObjectTypes : int
-{
-    CO_COLLISION_OBJECT             = 1 << 0,
-    CO_RIGID_BODY                   = 1 << 1,
-    CO_GHOST_OBJECT                 = 1 << 2,
-    CO_SOFT_BODY                    = 1 << 3,
-    CO_HF_FLUID                     = 1 << 4,
-    CO_USER_TYPE                    = 1 << 5,
-}
-
-// Values used by Bullet and BulletSim to control object properties.
-// Bullet's "CollisionFlags" has more to do with operations on the
-//    object (if collisions happen, if gravity effects it, ...).
-public enum CollisionFlags : uint
-{
-    CF_STATIC_OBJECT                 = 1 << 0,
-    CF_KINEMATIC_OBJECT              = 1 << 1,
-    CF_NO_CONTACT_RESPONSE           = 1 << 2,
-    CF_CUSTOM_MATERIAL_CALLBACK      = 1 << 3,
-    CF_CHARACTER_OBJECT              = 1 << 4,
-    CF_DISABLE_VISUALIZE_OBJECT      = 1 << 5,
-    CF_DISABLE_SPU_COLLISION_PROCESS = 1 << 6,
-    // Following used by BulletSim to control collisions
-    BS_SUBSCRIBE_COLLISION_EVENTS    = 1 << 10,
-    BS_FLOATS_ON_WATER               = 1 << 11,
-    BS_NONE                          = 0,
-    BS_ALL                           = 0xFFFFFFFF,
-
-    // These are the collision flags switched depending on physical state.
-    // The other flags are used for other things and should not be fooled with.
-    BS_ACTIVE = CF_STATIC_OBJECT
-                | CF_KINEMATIC_OBJECT
-                | CF_NO_CONTACT_RESPONSE
-};
-
-// Values for collisions groups and masks
-public enum CollisionFilterGroups : uint
-{
-    // Don't use the bit definitions!!  Define the use in a
-    //   filter/mask definition below. This way collision interactions
-    //   are more easily debugged.
-    BNoneFilter              = 0,
-    BDefaultFilter           = 1 << 0,
-    BStaticFilter            = 1 << 1,
-    BKinematicFilter         = 1 << 2,
-    BDebrisFilter            = 1 << 3,
-    BSensorTrigger           = 1 << 4,
-    BCharacterFilter         = 1 << 5,
-    BAllFilter               = 0xFFFFFFFF,
-    // Filter groups defined by BulletSim
-    BGroundPlaneFilter       = 1 << 10,
-    BTerrainFilter           = 1 << 11,
-    BRaycastFilter           = 1 << 12,
-    BSolidFilter             = 1 << 13,
-    BLinksetFilter           = 1 << 14,
-
-    // The collsion filters and masked are defined in one place -- don't want them scattered
-    AvatarFilter            = BCharacterFilter,
-    AvatarMask              = BAllFilter,
-    ObjectFilter            = BSolidFilter,
-    ObjectMask              = BAllFilter,
-    StaticObjectFilter      = BStaticFilter,
-    StaticObjectMask        = BAllFilter & ~BStaticFilter,   // static objects don't collide with each other
-    LinksetFilter           = BLinksetFilter,
-    LinksetMask             = BAllFilter & ~BLinksetFilter, // linkset objects don't collide with each other
-    VolumeDetectFilter      = BSensorTrigger,
-    VolumeDetectMask        = ~BSensorTrigger,
-    TerrainFilter           = BTerrainFilter,
-    TerrainMask             = BAllFilter & ~BStaticFilter,  // static objects on the ground don't collide
-    GroundPlaneFilter       = BGroundPlaneFilter,
-    GroundPlaneMask         = BAllFilter
-
-};
-
-// CFM controls the 'hardness' of the constraint. 0=fixed, 0..1=violatable. Default=0
-// ERP controls amount of correction per tick. Usable range=0.1..0.8. Default=0.2.
-public enum ConstraintParams : int
-{
-    BT_CONSTRAINT_ERP = 1,  // this one is not used in Bullet as of 20120730
-    BT_CONSTRAINT_STOP_ERP,
-    BT_CONSTRAINT_CFM,
-    BT_CONSTRAINT_STOP_CFM,
-};
-public enum ConstraintParamAxis : int
-{
-    AXIS_LINEAR_X = 0,
-    AXIS_LINEAR_Y,
-    AXIS_LINEAR_Z,
-    AXIS_ANGULAR_X,
-    AXIS_ANGULAR_Y,
-    AXIS_ANGULAR_Z,
-    AXIS_LINEAR_ALL = 20,    // these last three added by BulletSim so we don't have to do zillions of calls
-    AXIS_ANGULAR_ALL,
-    AXIS_ALL
-};
-
-// ===============================================================================
-static class BulletSimAPI {
-
-// Link back to the managed code for outputting log messages
-[UnmanagedFunctionPointer(CallingConvention.Cdecl)]
-public delegate void DebugLogCallback([MarshalAs(UnmanagedType.LPStr)]string msg);
-
-// ===============================================================================
-// Initialization and simulation
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern IntPtr Initialize2(Vector3 maxPosition, IntPtr parms,
-                                                                                        int maxCollisions,  IntPtr collisionArray,
-                                                                                        int maxUpdates, IntPtr updateArray,
-                                            DebugLogCallback logRoutine);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern bool UpdateParameter2(IntPtr world, uint localID, String parm, float value);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void SetHeightMap2(IntPtr world, float[] heightmap);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void Shutdown2(IntPtr sim);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern int PhysicsStep2(IntPtr world, float timeStep, int maxSubSteps, float fixedTimeStep,
-                        out int updatedEntityCount,
-                        out IntPtr updatedEntitiesPtr,
-                        out int collidersCount,
-                        out IntPtr collidersPtr);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern bool PushUpdate2(IntPtr obj);
-
-// =====================================================================================
-// Mesh, hull, shape and body creation helper routines
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern IntPtr CreateMeshShape2(IntPtr world,
-                int indicesCount, [MarshalAs(UnmanagedType.LPArray)] int[] indices,
-                int verticesCount, [MarshalAs(UnmanagedType.LPArray)] float[] vertices );
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern IntPtr CreateHullShape2(IntPtr world,
-                int hullCount, [MarshalAs(UnmanagedType.LPArray)] float[] hulls);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern IntPtr BuildHullShapeFromMesh2(IntPtr world, IntPtr meshShape);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern IntPtr BuildNativeShape2(IntPtr world, ShapeData shapeData);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern bool IsNativeShape2(IntPtr shape);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern IntPtr BuildCapsuleShape2(IntPtr world, float radius, float height, Vector3 scale);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern IntPtr CreateCompoundShape2(IntPtr sim, bool enableDynamicAabbTree);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern int GetNumberOfCompoundChildren2(IntPtr cShape);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void AddChildShapeToCompoundShape2(IntPtr cShape, IntPtr addShape, Vector3 pos, Quaternion rot);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern IntPtr GetChildShapeFromCompoundShapeIndex2(IntPtr cShape, int indx);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern IntPtr RemoveChildShapeFromCompoundShapeIndex2(IntPtr cShape, int indx);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void RemoveChildShapeFromCompoundShape2(IntPtr cShape, IntPtr removeShape);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void RecalculateCompoundShapeLocalAabb2(IntPtr cShape);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern IntPtr DuplicateCollisionShape2(IntPtr sim, IntPtr srcShape, uint id);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern IntPtr CreateBodyFromShapeAndInfo2(IntPtr sim, IntPtr shape, uint id, IntPtr constructionInfo);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern bool DeleteCollisionShape2(IntPtr world, IntPtr shape);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern int GetBodyType2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern IntPtr CreateBodyFromShape2(IntPtr sim, IntPtr shape, uint id, Vector3 pos, Quaternion rot);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern IntPtr CreateBodyWithDefaultMotionState2(IntPtr shape, uint id, Vector3 pos, Quaternion rot);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern IntPtr CreateGhostFromShape2(IntPtr sim, IntPtr shape, uint id, Vector3 pos, Quaternion rot);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern IntPtr AllocateBodyInfo2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void ReleaseBodyInfo2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void DestroyObject2(IntPtr sim, IntPtr obj);
-
-// =====================================================================================
-// Terrain creation and helper routines
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern IntPtr CreateHeightMapInfo2(IntPtr sim, uint id, Vector3 minCoords, Vector3 maxCoords,
-        [MarshalAs(UnmanagedType.LPArray)] float[] heightMap, float collisionMargin);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern IntPtr FillHeightMapInfo2(IntPtr sim, IntPtr mapInfo, uint id, Vector3 minCoords, Vector3 maxCoords,
-        [MarshalAs(UnmanagedType.LPArray)] float[] heightMap, float collisionMargin);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern bool ReleaseHeightMapInfo2(IntPtr heightMapInfo);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern IntPtr CreateGroundPlaneShape2(uint id, float height, float collisionMargin);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern IntPtr CreateTerrainShape2(IntPtr mapInfo);
-
-// =====================================================================================
-// Constraint creation and helper routines
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern IntPtr Create6DofConstraint2(IntPtr world, IntPtr obj1, IntPtr obj2,
-                    Vector3 frame1loc, Quaternion frame1rot,
-                    Vector3 frame2loc, Quaternion frame2rot,
-                    bool useLinearReferenceFrameA, bool disableCollisionsBetweenLinkedBodies);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern IntPtr Create6DofConstraintToPoint2(IntPtr world, IntPtr obj1, IntPtr obj2,
-                    Vector3 joinPoint,
-                    bool useLinearReferenceFrameA, bool disableCollisionsBetweenLinkedBodies);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern IntPtr CreateHingeConstraint2(IntPtr world, IntPtr obj1, IntPtr obj2,
-                    Vector3 pivotinA, Vector3 pivotinB,
-                    Vector3 axisInA, Vector3 axisInB,
-                    bool useLinearReferenceFrameA, bool disableCollisionsBetweenLinkedBodies);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void SetConstraintEnable2(IntPtr constrain, float numericTrueFalse);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void SetConstraintNumSolverIterations2(IntPtr constrain, float iterations);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern bool SetFrames2(IntPtr constrain,
-                Vector3 frameA, Quaternion frameArot, Vector3 frameB, Quaternion frameBrot);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern bool SetLinearLimits2(IntPtr constrain, Vector3 low, Vector3 hi);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern bool SetAngularLimits2(IntPtr constrain, Vector3 low, Vector3 hi);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern bool UseFrameOffset2(IntPtr constrain, float enable);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern bool TranslationalLimitMotor2(IntPtr constrain, float enable, float targetVel, float maxMotorForce);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern bool SetBreakingImpulseThreshold2(IntPtr constrain, float threshold);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern bool CalculateTransforms2(IntPtr constrain);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern bool SetConstraintParam2(IntPtr constrain, ConstraintParams paramIndex, float value, ConstraintParamAxis axis);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern bool DestroyConstraint2(IntPtr world, IntPtr constrain);
-
-// =====================================================================================
-// btCollisionWorld entries
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void UpdateSingleAabb2(IntPtr world, IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void UpdateAabbs2(IntPtr world);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern bool GetForceUpdateAllAabbs2(IntPtr world);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void SetForceUpdateAllAabbs2(IntPtr world, bool force);
-
-// =====================================================================================
-// btDynamicsWorld entries
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern bool AddObjectToWorld2(IntPtr world, IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern bool RemoveObjectFromWorld2(IntPtr world, IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern bool AddConstraintToWorld2(IntPtr world, IntPtr constrain, bool disableCollisionsBetweenLinkedObjects);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern bool RemoveConstraintFromWorld2(IntPtr world, IntPtr constrain);
-// =====================================================================================
-// btCollisionObject entries
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern Vector3 GetAnisotripicFriction2(IntPtr constrain);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern Vector3 SetAnisotripicFriction2(IntPtr constrain, Vector3 frict);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern bool HasAnisotripicFriction2(IntPtr constrain);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void SetContactProcessingThreshold2(IntPtr obj, float val);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern float GetContactProcessingThreshold2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern bool IsStaticObject2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern bool IsKinematicObject2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern bool IsStaticOrKinematicObject2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern bool HasContactResponse2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void SetCollisionShape2(IntPtr sim, IntPtr obj, IntPtr shape);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern IntPtr GetCollisionShape2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern int GetActivationState2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void SetActivationState2(IntPtr obj, int state);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void SetDeactivationTime2(IntPtr obj, float dtime);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern float GetDeactivationTime2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void ForceActivationState2(IntPtr obj, ActivationState state);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void Activate2(IntPtr obj, bool forceActivation);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern bool IsActive2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void SetRestitution2(IntPtr obj, float val);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern float GetRestitution2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void SetFriction2(IntPtr obj, float val);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern float GetFriction2(IntPtr obj);
-
-    /* Haven't defined the type 'Transform'
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern Transform GetWorldTransform2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void setWorldTransform2(IntPtr obj, Transform trans);
-     */
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern Vector3 GetPosition2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern Quaternion GetOrientation2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void SetTranslation2(IntPtr obj, Vector3 position, Quaternion rotation);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern IntPtr GetBroadphaseHandle2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void SetBroadphaseHandle2(IntPtr obj, IntPtr handle);
-
-    /*
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern Transform GetInterpolationWorldTransform2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void SetInterpolationWorldTransform2(IntPtr obj, Transform trans);
-     */
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void SetInterpolationLinearVelocity2(IntPtr obj, Vector3 vel);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void SetInterpolationAngularVelocity2(IntPtr obj, Vector3 vel);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void SetInterpolationVelocity2(IntPtr obj, Vector3 linearVel, Vector3 angularVel);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern float GetHitFraction2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void SetHitFraction2(IntPtr obj, float val);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern CollisionFlags GetCollisionFlags2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern CollisionFlags SetCollisionFlags2(IntPtr obj, CollisionFlags flags);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern CollisionFlags AddToCollisionFlags2(IntPtr obj, CollisionFlags flags);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern CollisionFlags RemoveFromCollisionFlags2(IntPtr obj, CollisionFlags flags);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern float GetCcdMotionThreshold2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void SetCcdMotionThreshold2(IntPtr obj, float val);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern float GetCcdSweptSphereRadius2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void SetCcdSweptSphereRadius2(IntPtr obj, float val);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern IntPtr GetUserPointer2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void SetUserPointer2(IntPtr obj, IntPtr val);
-
-// =====================================================================================
-// btRigidBody entries
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void ApplyGravity2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void SetGravity2(IntPtr obj, Vector3 val);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern Vector3 GetGravity2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void SetDamping2(IntPtr obj, float lin_damping, float ang_damping);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void SetLinearDamping2(IntPtr obj, float lin_damping);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void SetAngularDamping2(IntPtr obj, float ang_damping);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern float GetLinearDamping2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern float GetAngularDamping2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern float GetLinearSleepingThreshold2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern float GetAngularSleepingThreshold2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void ApplyDamping2(IntPtr obj, float timeStep);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void SetMassProps2(IntPtr obj, float mass, Vector3 inertia);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern Vector3 GetLinearFactor2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void SetLinearFactor2(IntPtr obj, Vector3 factor);
-
-    /*
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void SetCenterOfMassTransform2(IntPtr obj, Transform trans);
-     */
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void SetCenterOfMassByPosRot2(IntPtr obj, Vector3 pos, Quaternion rot);
-
-// Add a force to the object as if its mass is one.
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void ApplyCentralForce2(IntPtr obj, Vector3 force);
-
-// Set the force being applied to the object as if its mass is one.
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void SetObjectForce2(IntPtr obj, Vector3 force);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern Vector3 GetTotalForce2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern Vector3 GetTotalTorque2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern Vector3 GetInvInertiaDiagLocal2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void SetInvInertiaDiagLocal2(IntPtr obj, Vector3 inert);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void SetSleepingThresholds2(IntPtr obj, float lin_threshold, float ang_threshold);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void ApplyTorque2(IntPtr obj, Vector3 torque);
-
-// Apply force at the given point. Will add torque to the object.
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void ApplyForce2(IntPtr obj, Vector3 force, Vector3 pos);
-
-// Apply impulse to the object. Same as "ApplycentralForce" but force scaled by object's mass.
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void ApplyCentralImpulse2(IntPtr obj, Vector3 imp);
-
-// Apply impulse to the object's torque. Force is scaled by object's mass.
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void ApplyTorqueImpulse2(IntPtr obj, Vector3 imp);
-
-// Apply impulse at the point given. For is scaled by object's mass and effects both linear and angular forces.
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void ApplyImpulse2(IntPtr obj, Vector3 imp, Vector3 pos);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void ClearForces2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void ClearAllForces2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void UpdateInertiaTensor2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern Vector3 GetCenterOfMassPosition2(IntPtr obj);
-
-    /*
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern Transform GetCenterOfMassTransform2(IntPtr obj);
-     */
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern Vector3 GetLinearVelocity2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern Vector3 GetAngularVelocity2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void SetLinearVelocity2(IntPtr obj, Vector3 val);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void SetAngularVelocity2(IntPtr obj, Vector3 angularVelocity);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern Vector3 GetVelocityInLocalPoint2(IntPtr obj, Vector3 pos);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void Translate2(IntPtr obj, Vector3 trans);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void UpdateDeactivation2(IntPtr obj, float timeStep);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern bool WantsSleeping2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void SetAngularFactor2(IntPtr obj, float factor);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void SetAngularFactorV2(IntPtr obj, Vector3 factor);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern Vector3 GetAngularFactor2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern bool IsInWorld2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void AddConstraintRef2(IntPtr obj, IntPtr constrain);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void RemoveConstraintRef2(IntPtr obj, IntPtr constrain);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern IntPtr GetConstraintRef2(IntPtr obj, int index);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern int GetNumConstraintRefs2(IntPtr obj);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void SetCollisionFilterMask2(IntPtr body, uint filter, uint mask);
-
-// =====================================================================================
-// btCollisionShape entries
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern float GetAngularMotionDisc2(IntPtr shape);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern float GetContactBreakingThreshold2(IntPtr shape, float defaultFactor);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern bool IsPolyhedral2(IntPtr shape);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern bool IsConvex2d2(IntPtr shape);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern bool IsConvex2(IntPtr shape);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern bool IsNonMoving2(IntPtr shape);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern bool IsConcave2(IntPtr shape);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern bool IsCompound2(IntPtr shape);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern bool IsSoftBody2(IntPtr shape);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern bool IsInfinite2(IntPtr shape);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void SetLocalScaling2(IntPtr shape, Vector3 scale);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern Vector3 GetLocalScaling2(IntPtr shape);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern Vector3 CalculateLocalInertia2(IntPtr shape, float mass);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern int GetShapeType2(IntPtr shape);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void SetMargin2(IntPtr shape, float val);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern float GetMargin2(IntPtr shape);
-
-// =====================================================================================
-// Debugging
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void DumpRigidBody2(IntPtr sim, IntPtr collisionObject);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void DumpCollisionShape2(IntPtr sim, IntPtr collisionShape);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void DumpConstraint2(IntPtr sim, IntPtr constrain);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void DumpAllInfo2(IntPtr sim);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void DumpMapInfo2(IntPtr sim, IntPtr manInfo);
-
-[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
-public static extern void DumpPhysicsStatistics2(IntPtr sim);
-
-}
-}
diff --git a/OpenSim/Region/Physics/BulletSPlugin/BulletSimData.cs b/OpenSim/Region/Physics/BulletSPlugin/BulletSimData.cs
new file mode 100755
index 0000000..c7a2f7e
--- /dev/null
+++ b/OpenSim/Region/Physics/BulletSPlugin/BulletSimData.cs
@@ -0,0 +1,265 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyrightD
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+using System;
+using System.Collections.Generic;
+using System.Text;
+using OMV = OpenMetaverse;
+
+namespace OpenSim.Region.Physics.BulletSPlugin
+{
+// Classes to allow some type checking for the API
+// These hold pointers to allocated objects in the unmanaged space.
+// These classes are subclassed by the various physical implementations of
+// objects. In particular, there is a version for physical instances in
+// unmanaged memory ("unman") and one for in managed memory ("XNA").
+
+// Currently, the instances of these classes are a reference to a
+// physical representation and this has no releationship to other
+// instances. Someday, refarb the usage of these classes so each instance
+// refers to a particular physical instance and this class controls reference
+// counts and such. This should be done along with adding BSShapes.
+
+public class BulletWorld
+{
+    public BulletWorld(uint worldId, BSScene bss)
+    {
+        worldID = worldId;
+        physicsScene = bss;
+    }
+    public uint worldID;
+    // The scene is only in here so very low level routines have a handle to print debug/error messages
+    public BSScene physicsScene;
+}
+
+// An allocated Bullet btRigidBody
+public class BulletBody
+{
+    public BulletBody(uint id)
+    {
+        ID = id;
+        collisionType = CollisionType.Static;
+    }
+    public uint ID;
+    public CollisionType collisionType;
+
+    public virtual void Clear() { }
+    public virtual bool HasPhysicalBody { get { return false; } }
+
+    // Apply the specificed collision mask into the physical world
+    public virtual bool ApplyCollisionMask(BSScene physicsScene)
+    {
+        // Should assert the body has been added to the physical world.
+        // (The collision masks are stored in the collision proxy cache which only exists for
+        //    a collision body that is in the world.)
+        return physicsScene.PE.SetCollisionGroupMask(this,
+                                BulletSimData.CollisionTypeMasks[collisionType].group,
+                                BulletSimData.CollisionTypeMasks[collisionType].mask);
+    }
+
+    // Used for log messages for a unique display of the memory/object allocated to this instance
+    public virtual string AddrString
+    {
+        get { return "unknown"; }
+    }
+
+    public override string ToString()
+    {
+        StringBuilder buff = new StringBuilder();
+        buff.Append("<id=");
+        buff.Append(ID.ToString());
+        buff.Append(",p=");
+        buff.Append(AddrString);
+        buff.Append(",c=");
+        buff.Append(collisionType);
+        buff.Append(">");
+        return buff.ToString();
+    }
+}
+
+public class BulletShape
+{
+    public BulletShape()
+    {
+        type = BSPhysicsShapeType.SHAPE_UNKNOWN;
+        shapeKey = (System.UInt64)FixedShapeKey.KEY_NONE;
+        isNativeShape = false;
+    }
+    public BSPhysicsShapeType type;
+    public System.UInt64 shapeKey;
+    public bool isNativeShape;
+
+    public virtual void Clear() { }
+    public virtual bool HasPhysicalShape { get { return false; } }
+
+    // Make another reference to this physical object.
+    public virtual BulletShape Clone() { return new BulletShape(); }
+
+    // Return 'true' if this and other refer to the same physical object
+    public virtual bool ReferenceSame(BulletShape xx) { return false; }
+
+    // Used for log messages for a unique display of the memory/object allocated to this instance
+    public virtual string AddrString
+    {
+        get { return "unknown"; }
+    }
+
+    public override string ToString()
+    {
+        StringBuilder buff = new StringBuilder();
+        buff.Append("<p=");
+        buff.Append(AddrString);
+        buff.Append(",s=");
+        buff.Append(type.ToString());
+        buff.Append(",k=");
+        buff.Append(shapeKey.ToString("X"));
+        buff.Append(",n=");
+        buff.Append(isNativeShape.ToString());
+        buff.Append(">");
+        return buff.ToString();
+    }
+}
+
+// An allocated Bullet btConstraint
+public class BulletConstraint
+{
+    public BulletConstraint()
+    {
+    }
+    public virtual void Clear() { }
+    public virtual bool HasPhysicalConstraint { get { return false; } }
+
+    // Used for log messages for a unique display of the memory/object allocated to this instance
+    public virtual string AddrString
+    {
+        get { return "unknown"; }
+    }
+}
+
+// An allocated HeightMapThing which holds various heightmap info.
+// Made a class rather than a struct so there would be only one
+//      instance of this and C# will pass around pointers rather
+//      than making copies.
+public class BulletHMapInfo
+{
+    public BulletHMapInfo(uint id, float[] hm) {
+        ID = id;
+        heightMap = hm;
+        terrainRegionBase = OMV.Vector3.Zero;
+        minCoords = new OMV.Vector3(100f, 100f, 25f);
+        maxCoords = new OMV.Vector3(101f, 101f, 26f);
+        minZ = maxZ = 0f;
+        sizeX = sizeY = 256f;
+    }
+    public uint ID;
+    public float[] heightMap;
+    public OMV.Vector3 terrainRegionBase;
+    public OMV.Vector3 minCoords;
+    public OMV.Vector3 maxCoords;
+    public float sizeX, sizeY;
+    public float minZ, maxZ;
+    public BulletShape terrainShape;
+    public BulletBody terrainBody;
+}
+
+// The general class of collsion object.
+public enum CollisionType
+{
+    Avatar,
+    Groundplane,
+    Terrain,
+    Static,
+    Dynamic,
+    VolumeDetect,
+    // Linkset, // A linkset should be either Static or Dynamic
+    LinksetChild,
+    Unknown
+};
+
+// Hold specification of group and mask collision flags for a CollisionType
+public struct CollisionTypeFilterGroup
+{
+    public CollisionTypeFilterGroup(CollisionType t, uint g, uint m)
+    {
+        type = t;
+        group = g;
+        mask = m;
+    }
+    public CollisionType type;
+    public uint group;
+    public uint mask;
+};
+
+public static class BulletSimData
+{
+
+// Map of collisionTypes to flags for collision groups and masks.
+// As mentioned above, don't use the CollisionFilterGroups definitions directly in the code
+//     but, instead, use references to this dictionary. Finding and debugging
+//     collision flag problems will be made easier.
+public static Dictionary<CollisionType, CollisionTypeFilterGroup> CollisionTypeMasks 
+            = new Dictionary<CollisionType, CollisionTypeFilterGroup>()
+{
+    { CollisionType.Avatar, 
+                new CollisionTypeFilterGroup(CollisionType.Avatar, 
+                                (uint)CollisionFilterGroups.BCharacterGroup, 
+                                (uint)CollisionFilterGroups.BAllGroup)
+    },
+    { CollisionType.Groundplane, 
+                new CollisionTypeFilterGroup(CollisionType.Groundplane, 
+                                (uint)CollisionFilterGroups.BGroundPlaneGroup, 
+                                (uint)CollisionFilterGroups.BAllGroup)
+    },
+    { CollisionType.Terrain, 
+                new CollisionTypeFilterGroup(CollisionType.Terrain, 
+                                (uint)CollisionFilterGroups.BTerrainGroup, 
+                                (uint)(CollisionFilterGroups.BAllGroup & ~CollisionFilterGroups.BStaticGroup))
+    },
+    { CollisionType.Static, 
+                new CollisionTypeFilterGroup(CollisionType.Static, 
+                                (uint)CollisionFilterGroups.BStaticGroup, 
+                                (uint)(CollisionFilterGroups.BCharacterGroup | CollisionFilterGroups.BSolidGroup))
+    },
+    { CollisionType.Dynamic, 
+                new CollisionTypeFilterGroup(CollisionType.Dynamic, 
+                                (uint)CollisionFilterGroups.BSolidGroup, 
+                                (uint)(CollisionFilterGroups.BAllGroup))
+    },
+    { CollisionType.VolumeDetect, 
+                new CollisionTypeFilterGroup(CollisionType.VolumeDetect, 
+                                (uint)CollisionFilterGroups.BSensorTrigger, 
+                                (uint)(~CollisionFilterGroups.BSensorTrigger))
+    },
+    { CollisionType.LinksetChild,
+                new CollisionTypeFilterGroup(CollisionType.LinksetChild, 
+                                (uint)CollisionFilterGroups.BLinksetChildGroup, 
+                                (uint)(CollisionFilterGroups.BNoneGroup))
+                                // (uint)(CollisionFilterGroups.BCharacterGroup | CollisionFilterGroups.BSolidGroup))
+    },
+};
+
+}
+}
diff --git a/OpenSim/Region/Physics/BulletSPlugin/BulletSimTODO.txt b/OpenSim/Region/Physics/BulletSPlugin/BulletSimTODO.txt
new file mode 100755
index 0000000..29bd4e4
--- /dev/null
+++ b/OpenSim/Region/Physics/BulletSPlugin/BulletSimTODO.txt
@@ -0,0 +1,284 @@
+CURRENT PRIORITIES
+=================================================
+Avatars walking up stairs (HALF DONE)
+Vehicle movement on terrain smoothness
+limitMotorUp calibration (more down?)
+Preferred orientation angular correction fix
+Surfboard go wonky when turning
+        Angular motor direction is global coordinates rather than local coordinates?
+Boats float low in the water
+Avatar movement
+        flying into a wall doesn't stop avatar who keeps appearing to move through the obstacle (DONE)
+        walking up stairs is not calibrated correctly (stairs out of Kepler cabin)
+        avatar capsule rotation completed (NOT DONE - Bullet's capsule shape is not the solution)
+Enable vehicle border crossings (at least as poorly as ODE)
+        Terrain skirts
+        Avatar created in previous region and not new region when crossing border
+        Vehicle recreated in new sim at small Z value (offset from root value?) (DONE)
+Vehicle script tuning/debugging
+        Avanti speed script
+        Weapon shooter script
+Add material densities to the material types
+
+CRASHES
+=================================================
+20121129.1411: editting/moving phys object across region boundries causes crash
+    getPos-> btRigidBody::upcast -> getBodyType -> BOOM
+20121128.1600: mesh object not rezzing (no physics mesh).
+    Causes many errors. Doesn't stop after first error with box shape.
+    Eventually crashes when deleting the object.
+20121206.1434: rez Sam-pan into OSGrid BulletSim11 region
+        Immediate simulator crash. Mono does not output any stacktrace and
+        log just stops after reporting taint-time linking of the linkset.
+
+VEHICLES TODO LIST:
+=================================================
+Angular motor direction is global coordinates rather than local coordinates
+Border crossing with linked vehicle causes crash
+Vehicles (Move smoothly)
+Add vehicle collisions so IsColliding is properly reported.
+        Needed for banking, limitMotorUp, movementLimiting, ...
+VehicleAddForce is not scaled by the simulation step but it is only
+        applied for one step. Should it be scaled?
+Some vehicles should not be able to turn if no speed or off ground.
+Cannot edit/move a vehicle being ridden: it jumps back to the origional position.
+Neb car jiggling left and right
+        Happens on terrain and any other mesh object. Flat cubes are much smoother.
+        This has been reduced but not eliminated.
+Implement referenceFrame for all the motion routines.
+Angular motion around Z moves the vehicle in world Z and not vehicle Z in ODE.
+        Verify that angular motion specified around Z moves in the vehicle coordinates.
+Verify llGetVel() is returning a smooth and good value for vehicle movement.
+llGetVel() should return the root's velocity if requested in a child prim.
+Implement function efficiency for lineaar and angular motion.
+After getting off a vehicle, the root prim is phantom (can be walked through)
+    Need to force a position update for the root prim after compound shape destruction
+Linkset explosion after three "rides" on Nebadon lite vehicle (LinksetConstraint)
+For limitMotorUp, use raycast down to find if vehicle is in the air.
+Remove vehicle angular velocity zeroing in BSPrim.UpdateProperties().
+        A kludge that isn't fixing the real problem of Bullet adding extra motion.
+Incorporate inter-relationship of angular corrections. For instance, angularDeflection
+        and angularMotorUp will compute same X or Y correction. When added together
+        creates over-correction and over-shoot and wabbling.
+
+BULLETSIM TODO LIST:
+=================================================
+Implement an avatar mesh shape. The Bullet capsule is way too limited.
+        Consider just hand creating a vertex/index array in a new BSShapeAvatar.
+Revisit CollisionMargin. Builders notice the 0.04 spacing between prims.
+Duplicating a physical prim causes old prim to jump away
+        Dup a phys prim and the original become unselected and thus interacts w/ selected prim.
+Scenes with hundred of thousands of static objects take a lot of physics CPU time.
+BSPrim.Force should set a continious force on the prim. The force should be
+        applied each tick.  Some limits?
+Gun sending shooter flying.
+Collision margin (gap between physical objects lying on each other)
+Boundry checking (crashes related to crossing boundry)
+    Add check for border edge position for avatars and objects.
+    Verify the events are created for border crossings.
+Avatar rotation (check out changes to ScenePresence for physical rotation)
+Avatar running (what does phys engine need to do?)
+Small physical objects do not interact correctly
+    Create chain of .5x.5x.1 torui and make all but top physical so to hang.
+        The chain will fall apart and pairs will dance around on ground
+    Chains of 1x1x.2 will stay connected but will dance.
+    Chains above 2x2x.4 are more stable and get stablier as torui get larger.
+Add PID motor for avatar movement (slow to stop, ...)
+setForce should set a constant force. Different than AddImpulse.
+Implement raycast.
+Implement ShapeCollection.Dispose()
+Implement water as a plain so raycasting and collisions can happen with same.
+Add collision penetration return
+        Add field passed back by BulletSim.dll and fill with info in ManifoldConstact.GetDistance()
+Add osGetPhysicsEngineName() so scripters can tell whether BulletSim or ODE
+        Also osGetPhysicsEngineVerion() maybe.
+Linkset.Position and Linkset.Orientation requre rewrite to properly return
+        child position. LinksetConstraint acts like it's at taint time!!
+Implement LockAngularMotion -- implements llSetStatus(ROTATE_AXIS_*, T/F)
+Should the different PID factors have non-equal contributions for different
+        values of Efficiency?
+Selecting and deselecting physical objects causes CPU processing time to jump
+        http://www.youtube.com/watch?v=Hjg57fWg8yI&hd=1
+        put thousand physical objects, select and deselect same. CPU time will be large.
+Re-implement buoyancy as a separate force on the object rather than diddling gravity.
+        Register a pre-step event to add the force.
+More efficient memory usage when passing hull information from BSPrim to BulletSim
+Avatar movement motor check for zero or small movement. Somehow suppress small movements
+        when avatar has stopped and is just standing. Simple test for near zero has
+        the problem of preventing starting up (increase from zero) especially when falling.
+Physical and phantom will drop through the terrain
+
+
+LINKSETS
+======================================================
+Offset the center of the linkset to be the geometric center of all the prims
+        Not quite the same as the center-of-gravity
+Linksets should allow collisions to individual children
+        Add LocalID to children shapes in LinksetCompound and create events for individuals
+LinksetCompound: when one of the children changes orientation (like tires
+        turning on a vehicle, the whole compound object is rebuilt. Optimize this
+        so orientation/position of individual children can change without a rebuild.
+Verify/think through scripts in children of linksets. What do they reference
+        and return when getting position, velocity, ...
+Confirm constraint linksets still work after making all the changes for compound linksets.
+Add 'changed' flag or similar to reduce the number of times a linkset is rebuilt.
+        For compound linksets, add ability to remove or reposition individual child shapes.
+Disable activity of passive linkset children.
+        Since the linkset is a compound object, the old prims are left lying
+        around and need to be phantomized so they don't collide, ...
+Speed up creation of large physical linksets
+        For instance, sitting in Neb's car (130 prims) takes several seconds to become physical.
+        REALLY bad for very large physical linksets (freezes the sim for many seconds).
+Eliminate collisions between objects in a linkset. (LinksetConstraint)
+    Have UserPointer point to struct with localID and linksetID?
+    Objects in original linkset still collide with each other?
+
+MORE
+======================================================
+Use the HACD convex hull routine in Bullet rather than the C# version.
+Do we need to do convex hulls all the time? Can complex meshes be left meshes?
+        There is some problem with meshes and collisions
+Test avatar walking up stairs. How does compare with SL.
+    Radius of the capsule affects ability to climb edges.
+Debounce avatar contact so legs don't keep folding up when standing.
+Implement LSL physics controls. Like STATUS_ROTATE_X.
+Add border extensions to terrain to help region crossings and objects leaving region.
+Use a different capsule shape for avatar when sitting
+        LL uses a pyrimidal shape scaled by the avatar's bounding box
+        http://wiki.secondlife.com/wiki/File:Avmeshforms.png
+
+Performance test with lots of avatars. Can BulletSim support a thousand?
+Optimize collisions in C++: only send up to the object subscribed to collisions.
+    Use collision subscription and remove the collsion(A,B) and collision(B,A)
+Check whether SimMotionState needs large if statement (see TODO).
+
+Implement 'top colliders' info.
+Avatar jump
+Performance measurement and changes to make quicker.
+Implement detailed physics stats (GetStats()).
+
+Measure performance improvement from hulls
+Test not using ghost objects for volume detect implementation.
+Performance of closures and delegates for taint processing
+        Are there faster ways?
+        Is any slowdown introduced by the existing implementation significant?
+Is there are more efficient method of implementing pre and post step actions?
+        See http://www.codeproject.com/Articles/29922/Weak-Events-in-C
+
+Physics Arena central pyramid: why is one side permiable?
+
+In SL, perfect spheres don't seem to have rolling friction. Add special case.
+Enforce physical parameter min/max:
+        Gravity: [-1, 28]
+        Friction: [0, 255]
+        Density: [1, 22587]
+        Restitution [0, 1]
+        http://wiki.secondlife.com/wiki/Physics_Material_Settings_test
+Avatar attachments have no mass? http://forums-archive.secondlife.com/54/f0/31796/1.html
+
+INTERNAL IMPROVEMENT/CLEANUP
+=================================================
+Create the physical wrapper classes (BulletBody, BulletShape) by methods on
+        BSAPITemplate and make their actual implementation Bullet engine specific.
+        For the short term, just call the existing functions in ShapeCollection.
+Consider moving prim/character body and shape destruction in destroy()
+        to postTimeTime rather than protecting all the potential sets that
+        might have been queued up.
+Remove unused fields from ShapeData (not used in API2)
+Remove unused fields from pinned memory shared parameter block
+        Create parameter variables in BSScene to replace same.
+Breakout code for mesh/hull/compound/native into separate BSShape* classes
+    Standardize access to building and reference code.
+        The skeleton classes are in the sources but are not complete or linked in.
+Make BSBody and BSShape real classes to centralize creation/changin/destruction
+        Convert state and parameter calls from BulletSimAPI direct calls to
+                calls on BSBody and BSShape
+Generalize Dynamics and PID with standardized motors.
+Generalize Linkset and vehicles into PropertyManagers
+    Methods for Refresh, RemoveBodyDependencies, RestoreBodyDependencies
+        Potentially add events for shape destruction, etc.
+Complete implemention of preStepActions
+        Replace vehicle step call with prestep event.
+        Is there a need for postStepActions? postStepTaints?
+Implement linkset by setting position of children when root updated. (LinksetManual)
+        Linkset implementation using manual prim movement.
+LinkablePrim class? Would that simplify/centralize the linkset logic?
+BSScene.UpdateParameterSet() is broken. How to set params on objects?
+Remove HeightmapInfo from terrain specification
+    Since C++ code does not need terrain height, this structure et al are not needed.
+Add floating motor for BS_FLOATS_ON_WATER so prim and avatar will
+    bob at the water level. BSPrim.PositionSanityCheck().
+Should taints check for existance or activeness of target?
+        When destroying linksets/etc, taints can be generated for objects that are
+        actually gone when the taint happens. Crashes don't happen because the taint closure
+        keeps the object from being freed, but that is just an accident.
+        Possibly have and 'active' flag that is checked by the taint processor?
+Parameters for physics logging should be moved from BSScene to BSParam (at least boolean ones)
+Can some of the physical wrapper classes (BulletBody, BulletWorld, BulletShape) be 'sealed'?
+There are TOO MANY interfaces from BulletSim core to Bullet itself
+        Think of something to eliminate one or more of the layers
+
+THREADING
+=================================================
+Do taint action immediately if not actually executing Bullet.
+        Add lock around Bullet execution and just do taint actions if simulation is not happening.
+
+DONE DONE DONE DONE
+=================================================
+Cleanup code in BSDynamics by using motors. (Resolution: started)
+Consider implementing terrain with a mesh rather than heightmap. (Resolution: done)
+    Would have better and adjustable resolution.
+Build terrain mesh so heighmap is height of the center of the square meter.
+    Resolution: NOT DONE: SL and ODE define meter square as being at one corner with one diagional.
+Terrain as mesh. (Resolution: done)
+How are static linksets seen by the physics engine?
+    Resolution: they are not linked in physics. When moved, all the children are repositioned.
+Convert BSCharacter to use all API2 (Resolution: done)
+Avatar pushing difficult (too heavy?)
+Use asset service passed to BulletSim to get sculptie bodies, etc. (Resolution: done)
+Remove old code in DLL (all non-API2 stuff). (Resolution: done)
+Measurements of mega-physical prim performance (with graph) (Resolution: done, email)
+Debug Bullet internal stats output (why is timing all wrong?)
+        Resolution: Bullet stats logging only works with a single instance of Bullet (one region).
+Implement meshes or just verify that they work. (Resolution: they do!)
+Do prim hash codes work for sculpties and meshes? (Resolution: yes)
+Linkset implementation using compound shapes. (Resolution: implemented LinksetCompound)
+    Compound shapes will need the LocalID in the shapes and collision
+    processing to get it from there.
+Light cycle not banking (Resolution: It doesn't. Banking is roll adding yaw.)
+Package Bullet source mods for Bullet internal stats output
+        (Resolution: move code into WorldData.h rather than relying on patches)
+Single prim vehicles don't seem to properly vehiclize.
+        (Resolution: mass was not getting set properly for single prim linksets)
+Add material type linkage and input all the material property definitions.
+        Skeleton classes and table are in the sources but are not filled or used.
+        (Resolution: 
+Neb vehicle taking > 25ms of physics time!!
+        (Resolution: compound linksets were being rebuild WAY too often)
+Avatar height off after unsitting (floats off ground)
+        Editting appearance then moving restores.
+        Must not be initializing height when recreating capsule after unsit.
+        (Resolution: confusion of scale vs size for native objects removed)
+Light cycle falling over when driving (Resolution: implemented angularMotorUp)
+Should vehicle angular/linear movement friction happen after all the components
+        or does it only apply to the basic movement?
+        (Resolution: friction added before returning newly computed motor value.
+        What is expected by some vehicles (turning up friction to moderate speed))
+Tune terrain/object friction to be closer to SL.
+        (Resolution: added material type with friction and resolution)
+Smooth avatar movement with motor (DONE)
+        Should motor update be all at taint-time? (Yes, DONE)
+        Fix avatar slowly sliding when standing (zero motion when stopped) (DONE)
+        (Resolution: added BSVMotor for avatar starting and stopping)
+llApplyImpulse()
+        Compare mass/movement in OS and SL. Calibrate actions.  (DONE)
+        (Resolution: tested on SL and OS. AddForce scales the force for timestep)
+llSetBuoyancy() (DONE)
+        (Resolution: Bullet resets object gravity when added to world. Moved set gravity)
+Avatar density is WAY off. Compare and calibrate with what's in SL. (DONE)
+        (Resolution: set default density to 3.5 (from 60) which is closer to SL)
+Redo BulletSimAPI to allow native C# implementation of Bullet option (DONE)
+        (Resolution: added BSAPITemplate and then interfaces for C++ Bullet and C# BulletXNA
+Meshes rendering as bounding boxes (DONE)
+        (Resolution: Added test for mesh/sculpties in native shapes so it didn't think it was a box)
+llMoveToTarget (Resolution: added simple motor to update the position.)