from the start... checking in ode-0.9

1 files changed, 485 insertions, 0 deletions

diff --git a/libraries/ode-0.9/ode/src/scrapbook.cpp b/libraries/ode-0.9/ode/src/scrapbook.cpp
new file mode 100644
index 0000000..2621814
--- /dev/null
+++ b/libraries/ode-0.9/ode/src/scrapbook.cpp
@@ -0,0 +1,485 @@
+
+/*
+
+this is code that was once useful but has now been obseleted.
+
+this file should not be compiled as part of ODE!
+
+*/
+
+//***************************************************************************
+// intersect a line segment with a plane
+
+extern "C" int dClipLineToBox (const dVector3 p1, const dVector3 p2,
+                               const dVector3 p, const dMatrix3 R,
+                               const dVector3 side)
+{
+  // compute the start and end of the line (p1 and p2) relative to the box.
+  // we will do all subsequent computations in this box-relative coordinate
+  // system. we have to do a translation and rotation for each point.
+  dVector3 tmp,s,e;
+  tmp[0] = p1[0] - p[0];
+  tmp[1] = p1[1] - p[1];
+  tmp[2] = p1[2] - p[2];
+  dMULTIPLY1_331 (s,R,tmp);
+  tmp[0] = p2[0] - p[0];
+  tmp[1] = p2[1] - p[1];
+  tmp[2] = p2[2] - p[2];
+  dMULTIPLY1_331 (e,R,tmp);
+
+  // compute the vector 'v' from the start point to the end point
+  dVector3 v;
+  v[0] = e[0] - s[0];
+  v[1] = e[1] - s[1];
+  v[2] = e[2] - s[2];
+
+  // a point on the line is defined by the parameter 't'. t=0 corresponds
+  // to the start of the line, t=1 corresponds to the end of the line.
+  // we will clip the line to the box by finding the range of t where a
+  // point on the line is inside the box. the currently known bounds for
+  // t and tlo..thi.
+  dReal tlo=0,thi=1;
+
+  // clip in the X/Y/Z direction
+  for (int i=0; i<3; i++) {
+    // first adjust s,e for the current t range. this is redundant for the
+    // first iteration, but never mind.
+    e[i] = s[i] + thi*v[i];
+    s[i] = s[i] + tlo*v[i];
+    // compute where t intersects the positive and negative sides.
+    dReal tp = ( side[i] - s[i])/v[i];  // @@@ handle case where denom=0
+    dReal tm = (-side[i] - s[i])/v[i];
+    // handle 9 intersection cases
+    if (s[i] <= -side[i]) {
+      tlo = tm;
+      if (e[i] <= -side[i]) return 0;
+      else if (e[i] >= side[i]) thi = tp;
+    }
+    else if (s[i] <= side[i]) {
+      if (e[i] <= -side[i]) thi = tm;
+      else if (e[i] >= side[i]) thi = tp;
+    }
+    else {
+      tlo = tp;
+      if (e[i] <= -side[i]) thi = tm;
+      else if (e[i] >= side[i]) return 0;
+    }
+  }
+
+  //... @@@ AT HERE @@@
+
+  return 1;
+}
+
+
+//***************************************************************************
+// a nice try at C-B collision. unfortunately it doesn't work. the logic
+// for testing for line-box intersection is correct, but unfortunately the
+// closest-point distance estimates are often too large. as a result contact
+// points are placed incorrectly.
+
+
+int dCollideCB (const dxGeom *o1, const dxGeom *o2, int flags,
+                dContactGeom *contact, int skip)
+{
+  int i;
+
+  dIASSERT (skip >= (int)sizeof(dContactGeom));
+  dIASSERT (o1->_class->num == dCCylinderClass);
+  dIASSERT (o2->_class->num == dBoxClass);
+  contact->g1 = const_cast<dxGeom*> (o1);
+  contact->g2 = const_cast<dxGeom*> (o2);
+  dxCCylinder *cyl = (dxCCylinder*) CLASSDATA(o1);
+  dxBox *box = (dxBox*) CLASSDATA(o2);
+
+  // get p1,p2 = cylinder axis endpoints, get radius
+  dVector3 p1,p2;
+  dReal clen = cyl->lz * REAL(0.5);
+  p1[0] = o1->pos[0] + clen * o1->R[2];
+  p1[1] = o1->pos[1] + clen * o1->R[6];
+  p1[2] = o1->pos[2] + clen * o1->R[10];
+  p2[0] = o1->pos[0] - clen * o1->R[2];
+  p2[1] = o1->pos[1] - clen * o1->R[6];
+  p2[2] = o1->pos[2] - clen * o1->R[10];
+  dReal radius = cyl->radius;
+
+  // copy out box center, rotation matrix, and side array
+  dReal *c = o2->pos;
+  dReal *R = o2->R;
+  dReal *side = box->side;
+
+  // compute the start and end of the line (p1 and p2) relative to the box.
+  // we will do all subsequent computations in this box-relative coordinate
+  // system. we have to do a translation and rotation for each point.
+  dVector3 tmp3,s,e;
+  tmp3[0] = p1[0] - c[0];
+  tmp3[1] = p1[1] - c[1];
+  tmp3[2] = p1[2] - c[2];
+  dMULTIPLY1_331 (s,R,tmp3);
+  tmp3[0] = p2[0] - c[0];
+  tmp3[1] = p2[1] - c[1];
+  tmp3[2] = p2[2] - c[2];
+  dMULTIPLY1_331 (e,R,tmp3);
+
+  // compute the vector 'v' from the start point to the end point
+  dVector3 v;
+  v[0] = e[0] - s[0];
+  v[1] = e[1] - s[1];
+  v[2] = e[2] - s[2];
+
+  // compute the half-sides of the box
+  dReal S0 = side[0] * REAL(0.5);
+  dReal S1 = side[1] * REAL(0.5);
+  dReal S2 = side[2] * REAL(0.5);
+
+  // compute the size of the bounding box around the line segment
+  dReal B0 = dFabs (v[0]);
+  dReal B1 = dFabs (v[1]);
+  dReal B2 = dFabs (v[2]);
+
+  // for all 6 separation axes, measure the penetration depth. if any depth is
+  // less than 0 then the objects don't penetrate at all so we can just
+  // return 0. find the axis with the smallest depth, and record its normal.
+
+  // note: normalR is set to point to a column of R if that is the smallest
+  // depth normal so far. otherwise normalR is 0 and normalC is set to a
+  // vector relative to the box. invert_normal is 1 if the sign of the normal
+  // should be flipped.
+
+  dReal depth,trial_depth,tmp,length;
+  const dReal *normalR=0;
+  dVector3 normalC;
+  int invert_normal = 0;
+  int code = 0;         // 0=no contact, 1-3=face contact, 4-6=edge contact
+
+  depth = dInfinity;
+
+  // look at face-normal axes
+
+#undef TEST
+#define TEST(center,depth_expr,norm,contact_code) \
+  tmp = (center); \
+  trial_depth = radius + REAL(0.5) * ((depth_expr) - dFabs(tmp)); \
+  if (trial_depth < 0) return 0; \
+  if (trial_depth < depth) { \
+    depth = trial_depth; \
+    normalR = (norm); \
+    invert_normal = (tmp < 0); \
+    code = contact_code; \
+  }
+
+  TEST (s[0]+e[0], side[0] + B0, R+0, 1);
+  TEST (s[1]+e[1], side[1] + B1, R+1, 2);
+  TEST (s[2]+e[2], side[2] + B2, R+2, 3);
+
+  // look at v x box-edge axes
+
+#undef TEST
+#define TEST(box_radius,line_offset,nx,ny,nz,contact_code) \
+  tmp = (line_offset); \
+  trial_depth = (box_radius) - dFabs(tmp); \
+  length = dSqrt ((nx)*(nx) + (ny)*(ny) + (nz)*(nz)); \
+  if (length > 0) { \
+    length = dRecip(length); \
+    trial_depth = trial_depth * length + radius; \
+    if (trial_depth < 0) return 0; \
+    if (trial_depth < depth) { \
+      depth = trial_depth; \
+      normalR = 0; \
+      normalC[0] = (nx)*length; \
+      normalC[1] = (ny)*length; \
+      normalC[2] = (nz)*length; \
+      invert_normal = (tmp < 0); \
+      code = contact_code; \
+    } \
+  }
+
+  TEST (B2*S1+B1*S2,v[1]*s[2]-v[2]*s[1], 0,-v[2],v[1], 4);
+  TEST (B2*S0+B0*S2,v[2]*s[0]-v[0]*s[2], v[2],0,-v[0], 5);
+  TEST (B1*S0+B0*S1,v[0]*s[1]-v[1]*s[0], -v[1],v[0],0, 6);
+
+#undef TEST
+
+  // if we get to this point, the box and ccylinder interpenetrate.
+  // compute the normal in global coordinates.
+  dReal *normal = contact[0].normal;
+  if (normalR) {
+    normal[0] = normalR[0];
+    normal[1] = normalR[4];
+    normal[2] = normalR[8];
+  }
+  else {
+    dMULTIPLY0_331 (normal,R,normalC);
+  }
+  if (invert_normal) {
+    normal[0] = -normal[0];
+    normal[1] = -normal[1];
+    normal[2] = -normal[2];
+  }
+
+  // set the depth
+  contact[0].depth = depth;
+
+  if (code == 0) {
+    return 0;           // should never get here
+  }
+  else if (code >= 4) {
+    // handle edge contacts
+    // find an endpoint q1 on the intersecting edge of the box
+    dVector3 q1;
+    dReal sign[3];
+    for (i=0; i<3; i++) q1[i] = c[i];
+    sign[0] = (dDOT14(normal,R+0) > 0) ? REAL(1.0) : REAL(-1.0);
+    for (i=0; i<3; i++) q1[i] += sign[0] * S0 * R[i*4];
+    sign[1] = (dDOT14(normal,R+1) > 0) ? REAL(1.0) : REAL(-1.0);
+    for (i=0; i<3; i++) q1[i] += sign[1] * S1 * R[i*4+1];
+    sign[2] = (dDOT14(normal,R+2) > 0) ? REAL(1.0) : REAL(-1.0);
+    for (i=0; i<3; i++) q1[i] += sign[2] * S2 * R[i*4+2];
+
+    // find the other endpoint q2 of the intersecting edge
+    dVector3 q2;
+    for (i=0; i<3; i++)
+      q2[i] = q1[i] - R[code-4 + i*4] * (sign[code-4] * side[code-4]);
+
+    // determine the closest point between the box edge and the line segment
+    dVector3 cp1,cp2;
+    dClosestLineSegmentPoints (q1,q2, p1,p2, cp1,cp2);
+    for (i=0; i<3; i++) contact[0].pos[i] = cp1[i] - REAL(0.5)*normal[i]*depth;
+    return 1;
+  }
+  else {
+    // handle face contacts.
+    // @@@ temporary: make deepest vertex on the line the contact point.
+    // @@@ this kind of works, but we sometimes need two contact points for
+    // @@@ stability.
+
+    // compute 'v' in global coordinates
+    dVector3 gv;
+    for (i=0; i<3; i++) gv[i] = p2[i] - p1[i];
+
+    if (dDOT (normal,gv) > 0) {
+      for (i=0; i<3; i++)
+        contact[0].pos[i] = p1[i] + (depth*REAL(0.5)-radius)*normal[i];
+    }
+    else {
+      for (i=0; i<3; i++)
+        contact[0].pos[i] = p2[i] + (depth*REAL(0.5)-radius)*normal[i];
+    }
+    return 1;
+  }
+}
+
+//***************************************************************************
+// this function works, it's just not being used for anything at the moment:
+
+// given a box (R,side), `R' is the rotation matrix for the box, and `side'
+// is a vector of x/y/z side lengths, return the size of the interval of the
+// box projected along the given axis. if the axis has unit length then the
+// return value will be the actual diameter, otherwise the result will be
+// scaled by the axis length.
+
+static inline dReal boxDiameter (const dMatrix3 R, const dVector3 side,
+                                 const dVector3 axis)
+{
+  dVector3 q;
+  dMULTIPLY1_331 (q,R,axis);    // transform axis to body-relative
+  return dFabs(q[0])*side[0] + dFabs(q[1])*side[1] + dFabs(q[2])*side[2];
+}
+
+//***************************************************************************
+// the old capped cylinder to capped cylinder collision code. this fails to
+// detect cap-to-cap contact points when the cylinder axis are aligned, but
+// other that that it is pretty robust.
+
+// this returns at most one contact point when the two cylinder's axes are not
+// aligned, and at most two (for stability) when they are aligned.
+// the algorithm minimizes the distance between two "sample spheres" that are
+// positioned along the cylinder axes according to:
+//    sphere1 = pos1 + alpha1 * axis1
+//    sphere2 = pos2 + alpha2 * axis2
+// alpha1 and alpha2 are limited to +/- half the length of the cylinders.
+// the algorithm works by finding a solution that has both alphas free, or
+// a solution that has one or both alphas fixed to the ends of the cylinder.
+
+int dCollideCCylinderCCylinder (dxGeom *o1, dxGeom *o2,
+                                int flags, dContactGeom *contact, int skip)
+{
+  int i;
+  const dReal tolerance = REAL(1e-5);
+
+  dIASSERT (skip >= (int)sizeof(dContactGeom));
+  dIASSERT (o1->type == dCCylinderClass);
+  dIASSERT (o2->type == dCCylinderClass);
+  dxCCylinder *cyl1 = (dxCCylinder*) o1;
+  dxCCylinder *cyl2 = (dxCCylinder*) o2;
+
+  contact->g1 = o1;
+  contact->g2 = o2;
+
+  // copy out some variables, for convenience
+  dReal lz1 = cyl1->lz * REAL(0.5);
+  dReal lz2 = cyl2->lz * REAL(0.5);
+  dReal *pos1 = o1->pos;
+  dReal *pos2 = o2->pos;
+  dReal axis1[3],axis2[3];
+  axis1[0] = o1->R[2];
+  axis1[1] = o1->R[6];
+  axis1[2] = o1->R[10];
+  axis2[0] = o2->R[2];
+  axis2[1] = o2->R[6];
+  axis2[2] = o2->R[10];
+
+  dReal alpha1,alpha2,sphere1[3],sphere2[3];
+  int fix1 = 0;         // 0 if alpha1 is free, +/-1 to fix at +/- lz1
+  int fix2 = 0;         // 0 if alpha2 is free, +/-1 to fix at +/- lz2
+
+  for (int count=0; count<9; count++) {
+    // find a trial solution by fixing or not fixing the alphas
+    if (fix1) {
+      if (fix2) {
+        // alpha1 and alpha2 are fixed, so the solution is easy
+        if (fix1 > 0) alpha1 = lz1; else alpha1 = -lz1;
+        if (fix2 > 0) alpha2 = lz2; else alpha2 = -lz2;
+        for (i=0; i<3; i++) sphere1[i] = pos1[i] + alpha1*axis1[i];
+        for (i=0; i<3; i++) sphere2[i] = pos2[i] + alpha2*axis2[i];
+      }
+      else {
+        // fix alpha1 but let alpha2 be free
+        if (fix1 > 0) alpha1 = lz1; else alpha1 = -lz1;
+        for (i=0; i<3; i++) sphere1[i] = pos1[i] + alpha1*axis1[i];
+        alpha2 = (axis2[0]*(sphere1[0]-pos2[0]) +
+                  axis2[1]*(sphere1[1]-pos2[1]) +
+                  axis2[2]*(sphere1[2]-pos2[2]));
+        for (i=0; i<3; i++) sphere2[i] = pos2[i] + alpha2*axis2[i];
+      }
+    }
+    else {
+      if (fix2) {
+        // fix alpha2 but let alpha1 be free
+        if (fix2 > 0) alpha2 = lz2; else alpha2 = -lz2;
+        for (i=0; i<3; i++) sphere2[i] = pos2[i] + alpha2*axis2[i];
+        alpha1 = (axis1[0]*(sphere2[0]-pos1[0]) +
+                  axis1[1]*(sphere2[1]-pos1[1]) +
+                  axis1[2]*(sphere2[2]-pos1[2]));
+        for (i=0; i<3; i++) sphere1[i] = pos1[i] + alpha1*axis1[i];
+      }
+      else {
+        // let alpha1 and alpha2 be free
+        // compute determinant of d(d^2)\d(alpha) jacobian
+        dReal a1a2 = dDOT (axis1,axis2);
+        dReal det = REAL(1.0)-a1a2*a1a2;
+        if (det < tolerance) {
+          // the cylinder axes (almost) parallel, so we will generate up to two
+          // contacts. the solution matrix is rank deficient so alpha1 and
+          // alpha2 are related by:
+          //       alpha2 =   alpha1 + (pos1-pos2)'*axis1   (if axis1==axis2)
+          //    or alpha2 = -(alpha1 + (pos1-pos2)'*axis1)  (if axis1==-axis2)
+          // first compute where the two cylinders overlap in alpha1 space:
+          if (a1a2 < 0) {
+            axis2[0] = -axis2[0];
+            axis2[1] = -axis2[1];
+            axis2[2] = -axis2[2];
+          }
+          dReal q[3];
+          for (i=0; i<3; i++) q[i] = pos1[i]-pos2[i];
+          dReal k = dDOT (axis1,q);
+          dReal a1lo = -lz1;
+          dReal a1hi = lz1;
+          dReal a2lo = -lz2 - k;
+          dReal a2hi = lz2 - k;
+          dReal lo = (a1lo > a2lo) ? a1lo : a2lo;
+          dReal hi = (a1hi < a2hi) ? a1hi : a2hi;
+          if (lo <= hi) {
+            int num_contacts = flags & NUMC_MASK;
+            if (num_contacts >= 2 && lo < hi) {
+              // generate up to two contacts. if one of those contacts is
+              // not made, fall back on the one-contact strategy.
+              for (i=0; i<3; i++) sphere1[i] = pos1[i] + lo*axis1[i];
+              for (i=0; i<3; i++) sphere2[i] = pos2[i] + (lo+k)*axis2[i];
+              int n1 = dCollideSpheres (sphere1,cyl1->radius,
+                                        sphere2,cyl2->radius,contact);
+              if (n1) {
+                for (i=0; i<3; i++) sphere1[i] = pos1[i] + hi*axis1[i];
+                for (i=0; i<3; i++) sphere2[i] = pos2[i] + (hi+k)*axis2[i];
+                dContactGeom *c2 = CONTACT(contact,skip);
+                int n2 = dCollideSpheres (sphere1,cyl1->radius,
+                                          sphere2,cyl2->radius, c2);
+                if (n2) {
+                  c2->g1 = o1;
+                  c2->g2 = o2;
+                  return 2;
+                }
+              }
+            }
+
+            // just one contact to generate, so put it in the middle of
+            // the range
+            alpha1 = (lo + hi) * REAL(0.5);
+            alpha2 = alpha1 + k;
+            for (i=0; i<3; i++) sphere1[i] = pos1[i] + alpha1*axis1[i];
+            for (i=0; i<3; i++) sphere2[i] = pos2[i] + alpha2*axis2[i];
+            return dCollideSpheres (sphere1,cyl1->radius,
+                                    sphere2,cyl2->radius,contact);
+          }
+          else return 0;
+        }
+        det = REAL(1.0)/det;
+        dReal delta[3];
+        for (i=0; i<3; i++) delta[i] = pos1[i] - pos2[i];
+        dReal q1 = dDOT (delta,axis1);
+        dReal q2 = dDOT (delta,axis2);
+        alpha1 = det*(a1a2*q2-q1);
+        alpha2 = det*(q2-a1a2*q1);
+        for (i=0; i<3; i++) sphere1[i] = pos1[i] + alpha1*axis1[i];
+        for (i=0; i<3; i++) sphere2[i] = pos2[i] + alpha2*axis2[i];
+      }
+    }
+
+    // if the alphas are outside their allowed ranges then fix them and
+    // try again
+    if (fix1==0) {
+      if (alpha1 < -lz1) {
+        fix1 = -1;
+        continue;
+      }
+      if (alpha1 > lz1) {
+        fix1 = 1;
+        continue;
+      }
+    }
+    if (fix2==0) {
+      if (alpha2 < -lz2) {
+        fix2 = -1;
+        continue;
+      }
+      if (alpha2 > lz2) {
+        fix2 = 1;
+        continue;
+      }
+    }
+
+    // unfix the alpha variables if the local distance gradient indicates
+    // that we are not yet at the minimum
+    dReal tmp[3];
+    for (i=0; i<3; i++) tmp[i] = sphere1[i] - sphere2[i];
+    if (fix1) {
+      dReal gradient = dDOT (tmp,axis1);
+      if ((fix1 > 0 && gradient > 0) || (fix1 < 0 && gradient < 0)) {
+        fix1 = 0;
+        continue;
+      }
+    }
+    if (fix2) {
+      dReal gradient = -dDOT (tmp,axis2);
+      if ((fix2 > 0 && gradient > 0) || (fix2 < 0 && gradient < 0)) {
+        fix2 = 0;
+        continue;
+      }
+    }
+    return dCollideSpheres (sphere1,cyl1->radius,sphere2,cyl2->radius,contact);
+  }
+  // if we go through the loop too much, then give up. we should NEVER get to
+  // this point (i hope).
+  dMessage (0,"dCollideCC(): too many iterations");
+  return 0;
+}