libraries moved to opensim-libs, a new repository

1 files changed, 0 insertions, 485 deletions

diff --git a/libraries/ode-0.9/ode/src/scrapbook.cpp b/libraries/ode-0.9/ode/src/scrapbook.cpp
deleted file mode 100644
index 2621814..0000000
--- a/libraries/ode-0.9/ode/src/scrapbook.cpp
+++ /dev/null
@@ -1,485 +0,0 @@
-
-/*
-
-this is code that was once useful but has now been obseleted.
-
-this file should not be compiled as part of ODE!
-
-*/
-
-//***************************************************************************
-// intersect a line segment with a plane
-
-extern "C" int dClipLineToBox (const dVector3 p1, const dVector3 p2,
-                               const dVector3 p, const dMatrix3 R,
-                               const dVector3 side)
-{
-  // compute the start and end of the line (p1 and p2) relative to the box.
-  // we will do all subsequent computations in this box-relative coordinate
-  // system. we have to do a translation and rotation for each point.
-  dVector3 tmp,s,e;
-  tmp[0] = p1[0] - p[0];
-  tmp[1] = p1[1] - p[1];
-  tmp[2] = p1[2] - p[2];
-  dMULTIPLY1_331 (s,R,tmp);
-  tmp[0] = p2[0] - p[0];
-  tmp[1] = p2[1] - p[1];
-  tmp[2] = p2[2] - p[2];
-  dMULTIPLY1_331 (e,R,tmp);
-
-  // compute the vector 'v' from the start point to the end point
-  dVector3 v;
-  v[0] = e[0] - s[0];
-  v[1] = e[1] - s[1];
-  v[2] = e[2] - s[2];
-
-  // a point on the line is defined by the parameter 't'. t=0 corresponds
-  // to the start of the line, t=1 corresponds to the end of the line.
-  // we will clip the line to the box by finding the range of t where a
-  // point on the line is inside the box. the currently known bounds for
-  // t and tlo..thi.
-  dReal tlo=0,thi=1;
-
-  // clip in the X/Y/Z direction
-  for (int i=0; i<3; i++) {
-    // first adjust s,e for the current t range. this is redundant for the
-    // first iteration, but never mind.
-    e[i] = s[i] + thi*v[i];
-    s[i] = s[i] + tlo*v[i];
-    // compute where t intersects the positive and negative sides.
-    dReal tp = ( side[i] - s[i])/v[i];  // @@@ handle case where denom=0
-    dReal tm = (-side[i] - s[i])/v[i];
-    // handle 9 intersection cases
-    if (s[i] <= -side[i]) {
-      tlo = tm;
-      if (e[i] <= -side[i]) return 0;
-      else if (e[i] >= side[i]) thi = tp;
-    }
-    else if (s[i] <= side[i]) {
-      if (e[i] <= -side[i]) thi = tm;
-      else if (e[i] >= side[i]) thi = tp;
-    }
-    else {
-      tlo = tp;
-      if (e[i] <= -side[i]) thi = tm;
-      else if (e[i] >= side[i]) return 0;
-    }
-  }
-
-  //... @@@ AT HERE @@@
-
-  return 1;
-}
-
-
-//***************************************************************************
-// a nice try at C-B collision. unfortunately it doesn't work. the logic
-// for testing for line-box intersection is correct, but unfortunately the
-// closest-point distance estimates are often too large. as a result contact
-// points are placed incorrectly.
-
-
-int dCollideCB (const dxGeom *o1, const dxGeom *o2, int flags,
-                dContactGeom *contact, int skip)
-{
-  int i;
-
-  dIASSERT (skip >= (int)sizeof(dContactGeom));
-  dIASSERT (o1->_class->num == dCCylinderClass);
-  dIASSERT (o2->_class->num == dBoxClass);
-  contact->g1 = const_cast<dxGeom*> (o1);
-  contact->g2 = const_cast<dxGeom*> (o2);
-  dxCCylinder *cyl = (dxCCylinder*) CLASSDATA(o1);
-  dxBox *box = (dxBox*) CLASSDATA(o2);
-
-  // get p1,p2 = cylinder axis endpoints, get radius
-  dVector3 p1,p2;
-  dReal clen = cyl->lz * REAL(0.5);
-  p1[0] = o1->pos[0] + clen * o1->R[2];
-  p1[1] = o1->pos[1] + clen * o1->R[6];
-  p1[2] = o1->pos[2] + clen * o1->R[10];
-  p2[0] = o1->pos[0] - clen * o1->R[2];
-  p2[1] = o1->pos[1] - clen * o1->R[6];
-  p2[2] = o1->pos[2] - clen * o1->R[10];
-  dReal radius = cyl->radius;
-
-  // copy out box center, rotation matrix, and side array
-  dReal *c = o2->pos;
-  dReal *R = o2->R;
-  dReal *side = box->side;
-
-  // compute the start and end of the line (p1 and p2) relative to the box.
-  // we will do all subsequent computations in this box-relative coordinate
-  // system. we have to do a translation and rotation for each point.
-  dVector3 tmp3,s,e;
-  tmp3[0] = p1[0] - c[0];
-  tmp3[1] = p1[1] - c[1];
-  tmp3[2] = p1[2] - c[2];
-  dMULTIPLY1_331 (s,R,tmp3);
-  tmp3[0] = p2[0] - c[0];
-  tmp3[1] = p2[1] - c[1];
-  tmp3[2] = p2[2] - c[2];
-  dMULTIPLY1_331 (e,R,tmp3);
-
-  // compute the vector 'v' from the start point to the end point
-  dVector3 v;
-  v[0] = e[0] - s[0];
-  v[1] = e[1] - s[1];
-  v[2] = e[2] - s[2];
-
-  // compute the half-sides of the box
-  dReal S0 = side[0] * REAL(0.5);
-  dReal S1 = side[1] * REAL(0.5);
-  dReal S2 = side[2] * REAL(0.5);
-
-  // compute the size of the bounding box around the line segment
-  dReal B0 = dFabs (v[0]);
-  dReal B1 = dFabs (v[1]);
-  dReal B2 = dFabs (v[2]);
-
-  // for all 6 separation axes, measure the penetration depth. if any depth is
-  // less than 0 then the objects don't penetrate at all so we can just
-  // return 0. find the axis with the smallest depth, and record its normal.
-
-  // note: normalR is set to point to a column of R if that is the smallest
-  // depth normal so far. otherwise normalR is 0 and normalC is set to a
-  // vector relative to the box. invert_normal is 1 if the sign of the normal
-  // should be flipped.
-
-  dReal depth,trial_depth,tmp,length;
-  const dReal *normalR=0;
-  dVector3 normalC;
-  int invert_normal = 0;
-  int code = 0;         // 0=no contact, 1-3=face contact, 4-6=edge contact
-
-  depth = dInfinity;
-
-  // look at face-normal axes
-
-#undef TEST
-#define TEST(center,depth_expr,norm,contact_code) \
-  tmp = (center); \
-  trial_depth = radius + REAL(0.5) * ((depth_expr) - dFabs(tmp)); \
-  if (trial_depth < 0) return 0; \
-  if (trial_depth < depth) { \
-    depth = trial_depth; \
-    normalR = (norm); \
-    invert_normal = (tmp < 0); \
-    code = contact_code; \
-  }
-
-  TEST (s[0]+e[0], side[0] + B0, R+0, 1);
-  TEST (s[1]+e[1], side[1] + B1, R+1, 2);
-  TEST (s[2]+e[2], side[2] + B2, R+2, 3);
-
-  // look at v x box-edge axes
-
-#undef TEST
-#define TEST(box_radius,line_offset,nx,ny,nz,contact_code) \
-  tmp = (line_offset); \
-  trial_depth = (box_radius) - dFabs(tmp); \
-  length = dSqrt ((nx)*(nx) + (ny)*(ny) + (nz)*(nz)); \
-  if (length > 0) { \
-    length = dRecip(length); \
-    trial_depth = trial_depth * length + radius; \
-    if (trial_depth < 0) return 0; \
-    if (trial_depth < depth) { \
-      depth = trial_depth; \
-      normalR = 0; \
-      normalC[0] = (nx)*length; \
-      normalC[1] = (ny)*length; \
-      normalC[2] = (nz)*length; \
-      invert_normal = (tmp < 0); \
-      code = contact_code; \
-    } \
-  }
-
-  TEST (B2*S1+B1*S2,v[1]*s[2]-v[2]*s[1], 0,-v[2],v[1], 4);
-  TEST (B2*S0+B0*S2,v[2]*s[0]-v[0]*s[2], v[2],0,-v[0], 5);
-  TEST (B1*S0+B0*S1,v[0]*s[1]-v[1]*s[0], -v[1],v[0],0, 6);
-
-#undef TEST
-
-  // if we get to this point, the box and ccylinder interpenetrate.
-  // compute the normal in global coordinates.
-  dReal *normal = contact[0].normal;
-  if (normalR) {
-    normal[0] = normalR[0];
-    normal[1] = normalR[4];
-    normal[2] = normalR[8];
-  }
-  else {
-    dMULTIPLY0_331 (normal,R,normalC);
-  }
-  if (invert_normal) {
-    normal[0] = -normal[0];
-    normal[1] = -normal[1];
-    normal[2] = -normal[2];
-  }
-
-  // set the depth
-  contact[0].depth = depth;
-
-  if (code == 0) {
-    return 0;           // should never get here
-  }
-  else if (code >= 4) {
-    // handle edge contacts
-    // find an endpoint q1 on the intersecting edge of the box
-    dVector3 q1;
-    dReal sign[3];
-    for (i=0; i<3; i++) q1[i] = c[i];
-    sign[0] = (dDOT14(normal,R+0) > 0) ? REAL(1.0) : REAL(-1.0);
-    for (i=0; i<3; i++) q1[i] += sign[0] * S0 * R[i*4];
-    sign[1] = (dDOT14(normal,R+1) > 0) ? REAL(1.0) : REAL(-1.0);
-    for (i=0; i<3; i++) q1[i] += sign[1] * S1 * R[i*4+1];
-    sign[2] = (dDOT14(normal,R+2) > 0) ? REAL(1.0) : REAL(-1.0);
-    for (i=0; i<3; i++) q1[i] += sign[2] * S2 * R[i*4+2];
-
-    // find the other endpoint q2 of the intersecting edge
-    dVector3 q2;
-    for (i=0; i<3; i++)
-      q2[i] = q1[i] - R[code-4 + i*4] * (sign[code-4] * side[code-4]);
-
-    // determine the closest point between the box edge and the line segment
-    dVector3 cp1,cp2;
-    dClosestLineSegmentPoints (q1,q2, p1,p2, cp1,cp2);
-    for (i=0; i<3; i++) contact[0].pos[i] = cp1[i] - REAL(0.5)*normal[i]*depth;
-    return 1;
-  }
-  else {
-    // handle face contacts.
-    // @@@ temporary: make deepest vertex on the line the contact point.
-    // @@@ this kind of works, but we sometimes need two contact points for
-    // @@@ stability.
-
-    // compute 'v' in global coordinates
-    dVector3 gv;
-    for (i=0; i<3; i++) gv[i] = p2[i] - p1[i];
-
-    if (dDOT (normal,gv) > 0) {
-      for (i=0; i<3; i++)
-        contact[0].pos[i] = p1[i] + (depth*REAL(0.5)-radius)*normal[i];
-    }
-    else {
-      for (i=0; i<3; i++)
-        contact[0].pos[i] = p2[i] + (depth*REAL(0.5)-radius)*normal[i];
-    }
-    return 1;
-  }
-}
-
-//***************************************************************************
-// this function works, it's just not being used for anything at the moment:
-
-// given a box (R,side), `R' is the rotation matrix for the box, and `side'
-// is a vector of x/y/z side lengths, return the size of the interval of the
-// box projected along the given axis. if the axis has unit length then the
-// return value will be the actual diameter, otherwise the result will be
-// scaled by the axis length.
-
-static inline dReal boxDiameter (const dMatrix3 R, const dVector3 side,
-                                 const dVector3 axis)
-{
-  dVector3 q;
-  dMULTIPLY1_331 (q,R,axis);    // transform axis to body-relative
-  return dFabs(q[0])*side[0] + dFabs(q[1])*side[1] + dFabs(q[2])*side[2];
-}
-
-//***************************************************************************
-// the old capped cylinder to capped cylinder collision code. this fails to
-// detect cap-to-cap contact points when the cylinder axis are aligned, but
-// other that that it is pretty robust.
-
-// this returns at most one contact point when the two cylinder's axes are not
-// aligned, and at most two (for stability) when they are aligned.
-// the algorithm minimizes the distance between two "sample spheres" that are
-// positioned along the cylinder axes according to:
-//    sphere1 = pos1 + alpha1 * axis1
-//    sphere2 = pos2 + alpha2 * axis2
-// alpha1 and alpha2 are limited to +/- half the length of the cylinders.
-// the algorithm works by finding a solution that has both alphas free, or
-// a solution that has one or both alphas fixed to the ends of the cylinder.
-
-int dCollideCCylinderCCylinder (dxGeom *o1, dxGeom *o2,
-                                int flags, dContactGeom *contact, int skip)
-{
-  int i;
-  const dReal tolerance = REAL(1e-5);
-
-  dIASSERT (skip >= (int)sizeof(dContactGeom));
-  dIASSERT (o1->type == dCCylinderClass);
-  dIASSERT (o2->type == dCCylinderClass);
-  dxCCylinder *cyl1 = (dxCCylinder*) o1;
-  dxCCylinder *cyl2 = (dxCCylinder*) o2;
-
-  contact->g1 = o1;
-  contact->g2 = o2;
-
-  // copy out some variables, for convenience
-  dReal lz1 = cyl1->lz * REAL(0.5);
-  dReal lz2 = cyl2->lz * REAL(0.5);
-  dReal *pos1 = o1->pos;
-  dReal *pos2 = o2->pos;
-  dReal axis1[3],axis2[3];
-  axis1[0] = o1->R[2];
-  axis1[1] = o1->R[6];
-  axis1[2] = o1->R[10];
-  axis2[0] = o2->R[2];
-  axis2[1] = o2->R[6];
-  axis2[2] = o2->R[10];
-
-  dReal alpha1,alpha2,sphere1[3],sphere2[3];
-  int fix1 = 0;         // 0 if alpha1 is free, +/-1 to fix at +/- lz1
-  int fix2 = 0;         // 0 if alpha2 is free, +/-1 to fix at +/- lz2
-
-  for (int count=0; count<9; count++) {
-    // find a trial solution by fixing or not fixing the alphas
-    if (fix1) {
-      if (fix2) {
-        // alpha1 and alpha2 are fixed, so the solution is easy
-        if (fix1 > 0) alpha1 = lz1; else alpha1 = -lz1;
-        if (fix2 > 0) alpha2 = lz2; else alpha2 = -lz2;
-        for (i=0; i<3; i++) sphere1[i] = pos1[i] + alpha1*axis1[i];
-        for (i=0; i<3; i++) sphere2[i] = pos2[i] + alpha2*axis2[i];
-      }
-      else {
-        // fix alpha1 but let alpha2 be free
-        if (fix1 > 0) alpha1 = lz1; else alpha1 = -lz1;
-        for (i=0; i<3; i++) sphere1[i] = pos1[i] + alpha1*axis1[i];
-        alpha2 = (axis2[0]*(sphere1[0]-pos2[0]) +
-                  axis2[1]*(sphere1[1]-pos2[1]) +
-                  axis2[2]*(sphere1[2]-pos2[2]));
-        for (i=0; i<3; i++) sphere2[i] = pos2[i] + alpha2*axis2[i];
-      }
-    }
-    else {
-      if (fix2) {
-        // fix alpha2 but let alpha1 be free
-        if (fix2 > 0) alpha2 = lz2; else alpha2 = -lz2;
-        for (i=0; i<3; i++) sphere2[i] = pos2[i] + alpha2*axis2[i];
-        alpha1 = (axis1[0]*(sphere2[0]-pos1[0]) +
-                  axis1[1]*(sphere2[1]-pos1[1]) +
-                  axis1[2]*(sphere2[2]-pos1[2]));
-        for (i=0; i<3; i++) sphere1[i] = pos1[i] + alpha1*axis1[i];
-      }
-      else {
-        // let alpha1 and alpha2 be free
-        // compute determinant of d(d^2)\d(alpha) jacobian
-        dReal a1a2 = dDOT (axis1,axis2);
-        dReal det = REAL(1.0)-a1a2*a1a2;
-        if (det < tolerance) {
-          // the cylinder axes (almost) parallel, so we will generate up to two
-          // contacts. the solution matrix is rank deficient so alpha1 and
-          // alpha2 are related by:
-          //       alpha2 =   alpha1 + (pos1-pos2)'*axis1   (if axis1==axis2)
-          //    or alpha2 = -(alpha1 + (pos1-pos2)'*axis1)  (if axis1==-axis2)
-          // first compute where the two cylinders overlap in alpha1 space:
-          if (a1a2 < 0) {
-            axis2[0] = -axis2[0];
-            axis2[1] = -axis2[1];
-            axis2[2] = -axis2[2];
-          }
-          dReal q[3];
-          for (i=0; i<3; i++) q[i] = pos1[i]-pos2[i];
-          dReal k = dDOT (axis1,q);
-          dReal a1lo = -lz1;
-          dReal a1hi = lz1;
-          dReal a2lo = -lz2 - k;
-          dReal a2hi = lz2 - k;
-          dReal lo = (a1lo > a2lo) ? a1lo : a2lo;
-          dReal hi = (a1hi < a2hi) ? a1hi : a2hi;
-          if (lo <= hi) {
-            int num_contacts = flags & NUMC_MASK;
-            if (num_contacts >= 2 && lo < hi) {
-              // generate up to two contacts. if one of those contacts is
-              // not made, fall back on the one-contact strategy.
-              for (i=0; i<3; i++) sphere1[i] = pos1[i] + lo*axis1[i];
-              for (i=0; i<3; i++) sphere2[i] = pos2[i] + (lo+k)*axis2[i];
-              int n1 = dCollideSpheres (sphere1,cyl1->radius,
-                                        sphere2,cyl2->radius,contact);
-              if (n1) {
-                for (i=0; i<3; i++) sphere1[i] = pos1[i] + hi*axis1[i];
-                for (i=0; i<3; i++) sphere2[i] = pos2[i] + (hi+k)*axis2[i];
-                dContactGeom *c2 = CONTACT(contact,skip);
-                int n2 = dCollideSpheres (sphere1,cyl1->radius,
-                                          sphere2,cyl2->radius, c2);
-                if (n2) {
-                  c2->g1 = o1;
-                  c2->g2 = o2;
-                  return 2;
-                }
-              }
-            }
-
-            // just one contact to generate, so put it in the middle of
-            // the range
-            alpha1 = (lo + hi) * REAL(0.5);
-            alpha2 = alpha1 + k;
-            for (i=0; i<3; i++) sphere1[i] = pos1[i] + alpha1*axis1[i];
-            for (i=0; i<3; i++) sphere2[i] = pos2[i] + alpha2*axis2[i];
-            return dCollideSpheres (sphere1,cyl1->radius,
-                                    sphere2,cyl2->radius,contact);
-          }
-          else return 0;
-        }
-        det = REAL(1.0)/det;
-        dReal delta[3];
-        for (i=0; i<3; i++) delta[i] = pos1[i] - pos2[i];
-        dReal q1 = dDOT (delta,axis1);
-        dReal q2 = dDOT (delta,axis2);
-        alpha1 = det*(a1a2*q2-q1);
-        alpha2 = det*(q2-a1a2*q1);
-        for (i=0; i<3; i++) sphere1[i] = pos1[i] + alpha1*axis1[i];
-        for (i=0; i<3; i++) sphere2[i] = pos2[i] + alpha2*axis2[i];
-      }
-    }
-
-    // if the alphas are outside their allowed ranges then fix them and
-    // try again
-    if (fix1==0) {
-      if (alpha1 < -lz1) {
-        fix1 = -1;
-        continue;
-      }
-      if (alpha1 > lz1) {
-        fix1 = 1;
-        continue;
-      }
-    }
-    if (fix2==0) {
-      if (alpha2 < -lz2) {
-        fix2 = -1;
-        continue;
-      }
-      if (alpha2 > lz2) {
-        fix2 = 1;
-        continue;
-      }
-    }
-
-    // unfix the alpha variables if the local distance gradient indicates
-    // that we are not yet at the minimum
-    dReal tmp[3];
-    for (i=0; i<3; i++) tmp[i] = sphere1[i] - sphere2[i];
-    if (fix1) {
-      dReal gradient = dDOT (tmp,axis1);
-      if ((fix1 > 0 && gradient > 0) || (fix1 < 0 && gradient < 0)) {
-        fix1 = 0;
-        continue;
-      }
-    }
-    if (fix2) {
-      dReal gradient = -dDOT (tmp,axis2);
-      if ((fix2 > 0 && gradient > 0) || (fix2 < 0 && gradient < 0)) {
-        fix2 = 0;
-        continue;
-      }
-    }
-    return dCollideSpheres (sphere1,cyl1->radius,sphere2,cyl2->radius,contact);
-  }
-  // if we go through the loop too much, then give up. we should NEVER get to
-  // this point (i hope).
-  dMessage (0,"dCollideCC(): too many iterations");
-  return 0;
-}