* Preliminary preview of a split of a split for OpenSim.ini.example into separate .ini.example files in a config/ directory

27 files changed, 1282 insertions, 0 deletions

diff --git a/bin/config.preview.donotuseyet/README-IMPORTANT.TXT b/bin/config.preview.donotuseyet/README-IMPORTANT.TXT
new file mode 100644
index 0000000..b23aa9c
--- /dev/null
+++ b/bin/config.preview.donotuseyet/README-IMPORTANT.TXT
@@ -0,0 +1,5 @@
+README IMPORTANT
+
+This folder contains a preview configuration layout which is not yet active.  Please do not attempt to use it.  
+
+Currently, configuration should still be carried out by editing bin/OpenSim.ini (once it has been copied over from bin/OpenSim.ini.example)
diff --git a/bin/config.preview.donotuseyet/admin/gridinfo.ini.example b/bin/config.preview.donotuseyet/admin/gridinfo.ini.example
new file mode 100644
index 0000000..258cecb
--- /dev/null
+++ b/bin/config.preview.donotuseyet/admin/gridinfo.ini.example
@@ -0,0 +1,52 @@
+; This file shows initialization defaults for OpenSimulator.  If you want to override these
+; please copy/rename this file from .ini.example file to .ini.  For example
+;
+; chat.ini.example => chat.ini
+;
+; or you can copy and paste the settings from this file directly to bin/OpenSim.ini
+;
+
+[GridInfo]
+    ; These settings are used to return information on a get_grid_info call.
+    ; Client launcher scripts and third-party clients make use of this to
+    ; autoconfigure the client and to provide a nice user experience. If you
+    ; want to facilitate that, you should configure the settings here according
+    ; to your grid or standalone setup.
+    ;
+    ; See http://opensimulator.org/wiki/GridInfo
+
+    ; login uri: for grid this is the user server URI
+    login = http://127.0.0.1:9000/
+
+    ; long grid name: the long name of your grid
+    gridname = "the lost continent of hippo"
+
+    ; short grid name: the short name of your grid
+    gridnick = "hippogrid"
+
+    ; login page: optional: if it exists it will be used to tell the client to use
+    ;                       this as splash page
+    ; currently unused
+    ;welcome = http://127.0.0.1/welcome
+
+    ; helper uri: optional: if it exists if will be used to tell the client to use
+    ;                       this for all economy related things
+    ; currently unused
+    ;economy = http://127.0.0.1:9000/
+
+    ; web page of grid: optional: page providing further information about your grid
+    ; currently unused
+    ;about = http://127.0.0.1/about/
+
+    ; account creation: optional: page providing further information about obtaining
+    ;                             a user account on your grid
+    ; currently unused
+    ;register = http://127.0.0.1/register
+
+    ; help: optional: page providing further assistance for users of your grid
+    ; currently unused
+    ;help = http://127.0.0.1/help
+
+    ; password help: optional: page providing password assistance for users of your grid
+    ; currently unused
+    ;password = http://127.0.0.1/password
diff --git a/bin/config.preview.donotuseyet/admin/remoteadmin.ini.example b/bin/config.preview.donotuseyet/admin/remoteadmin.ini.example
new file mode 100644
index 0000000..5d6112d
--- /dev/null
+++ b/bin/config.preview.donotuseyet/admin/remoteadmin.ini.example
@@ -0,0 +1,34 @@
+; This file shows initialization defaults for OpenSimulator.  If you want to override these
+; please copy/rename this file from .ini.example file to .ini.  For example
+;
+; chat.ini.example => chat.ini
+;
+; or you can copy and paste the settings from this file directly to bin/OpenSim.ini
+;
+
+[RemoteAdmin]
+    enabled = false
+    access_password = unknown
+
+    ; the create_region XmlRpc call uses region_file_template to generate
+    ; the file name of newly create regions (if they are created
+    ; persistent). the parameter available are:
+    ;     {0} - X location
+    ;     {1} - Y location
+    ;     {2} - region UUID
+    ;     {3} - region port
+    ;     {4} - region name with " ", ":", "/" mapped to  "_"
+
+    region_file_template = "{0}x{1}-{2}.xml"
+
+    ; we can limit the number of regions that XmlRpcCreateRegion will
+    ; allow by setting this to a positive, non-0 number: as long as the
+    ; number of regions is below region_limits, XmlRpcCreateRegion will
+    ; succeed. setting region_limit to 0 disables the check.
+    ; default is 0
+    ;region_limit = 0
+
+    ; enable only those methods you deem to be appropriate using a | delimited whitelist
+    ; for example, enabled_methods = admin_broadcast|admin_region_query|admin_save_oar|admin_save_xml    
+    ; if this parameter is not specified but enabled = true, all methods will be available
+    enabled_methods = all
diff --git a/bin/config.preview.donotuseyet/admin/rest.ini.example b/bin/config.preview.donotuseyet/admin/rest.ini.example
new file mode 100644
index 0000000..e310eb9
--- /dev/null
+++ b/bin/config.preview.donotuseyet/admin/rest.ini.example
@@ -0,0 +1,32 @@
+; This file shows initialization defaults for OpenSimulator.  If you want to override these
+; please copy/rename this file from .ini.example file to .ini.  For example
+;
+; chat.ini.example => chat.ini
+;
+; or you can copy and paste the settings from this file directly to bin/OpenSim.ini
+;
+
+[RestPlugins]
+    ; Change this to true to enable REST Plugins. This must be true if you wish to use
+    ; REST Region or REST Asset and Inventory Plugins
+    enabled = false
+    god_key = SECRET
+    prefix = /admin
+
+
+[RestRegionPlugin]
+    ; Change this to true to enable the REST Region Plugin
+    enabled = false
+
+
+[RestHandler]
+  ; Change this to true to enable the REST Asset and Inventory Plugin
+  enabled = false
+  authenticate=true
+  secured=true
+  extended-escape=true
+  realm=OpenSim REST
+  dump-asset=false
+  path-fill=true
+  dump-line-size=32
+  flush-on-error=true
diff --git a/bin/config.preview.donotuseyet/opensim.ini.example b/bin/config.preview.donotuseyet/opensim.ini.example
new file mode 100644
index 0000000..0e4307d
--- /dev/null
+++ b/bin/config.preview.donotuseyet/opensim.ini.example
@@ -0,0 +1,329 @@
+; This file shows initialization defaults for OpenSimulator.  If you want to override these
+; please copy/rename this file from .ini.example file to .ini.  For example
+;
+; chat.ini.example => chat.ini
+;
+; or you can copy and paste the settings from this file directly to bin/OpenSim.ini
+;
+
+[Startup]
+    ; Set this to true if you want to log crashes to disk
+    ; this can be useful when submitting bug reports.
+    save_crashes = false
+
+    ; Directory to save crashes to if above is enabled
+    ; (eg default is /opensimdir/crashes/*.txt or C:\opensim\crashes\*.txt)
+    crash_dir = "crashes"
+
+    ; Http proxy support for llHTTPRequest and dynamic texture loading
+    ; Set HttpProxy to the URL for your proxy server if you would like
+    ; to proxy llHTTPRequests through a firewall
+    ; HttpProxy = "http://proxy.com"
+    ; Set HttpProxyExceptions to a list of regular expressions for 
+    ; URLs that you don't want going through the proxy such as servers
+    ; inside your firewall, separate patterns with a ';'
+    ; HttpProxyExceptions = ".mydomain.com;localhost"
+
+    ; Set this to true if you are connecting your OpenSimulator regions to a grid
+    ; Set this to false if you are running OpenSimulator in standalone mode
+    gridmode = false
+
+    startup_console_commands_file = "startup_commands.txt"
+    shutdown_console_commands_file = "shutdown_commands.txt"
+
+    ; To run a script every few minutes, set the script filename here
+    ; timer_Script = "filename"
+
+    ; ##
+    ; ## CLIENTS
+    ; ##
+
+    ; Enables EventQueueGet Service.
+    EventQueue = true
+
+    ; Set this to the DLL containig the client stack to use.
+    clientstack_plugin="OpenSim.Region.ClientStack.LindenUDP.dll"
+
+    ; ##
+    ; ## REGIONS
+    ; ##
+
+    ; Determine where OpenSimulator looks for the files which tell it which regions to server
+    ; Defaults to "filesystem" if this setting isn't present
+    region_info_source = "filesystem"
+    ; region_info_source = "web"
+
+    ; Determines where the region XML files are stored if you are loading these from the filesystem.
+    ; Defaults to bin/Regions in your OpenSimulator installation directory
+    ; regionload_regionsdir="C:\somewhere\xmlfiles\"
+
+    ; Determines the page from which regions xml is retrieved if you are loading these from the web
+    ; The XML here has the same format as it does on the filesystem (including the <Root> tag),
+    ; except that everything is also enclosed in a <Regions> tag.
+    ; regionload_webserver_url = "http://example.com/regions.xml";
+
+    ; Draw objects on maptile.   This step might take a long time if you've got a huge amount of
+    ; objects, so you can turn it off here if you'd like.
+    DrawPrimOnMapTile = true
+    ; Use terrain texture for maptiles if true, use shaded green if false
+    TextureOnMapTile = false
+
+    ; Maximum total size, and maximum size where a prim can be physical
+    NonPhysicalPrimMax = 256
+    PhysicalPrimMax = 10
+    ClampPrimSize = false
+
+    ; Region crossing
+    AllowScriptCrossing = false
+    ; If you set this to "true", any region that can teleport to you can
+    ; inject ARBITRARY BINARY CODE into your system. Use at your own risk.
+    ; YOU HAVE BEEN WARNED!!!
+    TrustBinaries = false
+
+    ; ##
+    ; ## STORAGE
+    ; ##
+
+    ; *** Prim Storage - only leave one storage_plugin uncommented ***
+    ; --- Null stores nothing - effectively disabling persistence:
+    ;storage_plugin = "OpenSim.Data.Null.dll"
+
+    ; --- To use sqlite as region storage:
+    storage_plugin = "OpenSim.Data.SQLite.dll"
+    storage_connection_string="URI=file:OpenSim.db,version=3";
+
+    ; --- To use MySQL storage, supply your own connectionstring (this is only an example):
+    ;     note that the supplied account needs create privilegies if you want it to auto-create needed tables.
+    ; storage_plugin="OpenSim.Data.MySQL.dll"
+    ; storage_connection_string="Data Source=localhost;Database=opensim;User ID=opensim;Password=*****;";
+    ; If you want to use a different database/server for estate data, then
+    ; uncomment and change this connect string. Defaults to the above if not set
+    ; estate_connection_string="Data Source=localhost;Database=opensim;User ID=opensim;Password=*****;";
+
+    ; Select whether you want to use local or grid asset storage.
+    ;
+    ; If you're running in standalone, you definitely want local, since there is no grid (hence this is redundant, and should
+    ; really be eliminated).  The database itself is defined in asset_plugin below
+    ;
+    ; If you're running a region server connecting to a grid, you probably want grid mode, since this will use the
+    ; grid asset server.  If you select local in grid mode, then you will use a database as specified in asset_plugin to store assets
+    ; locally.  This will mean you won't be able to take items using your assets to other people's regions.
+    
+    ; asset_database can be default, local or grid.  This controls where assets (textures, scripts, etc.) are stored for your region
+    ; 
+    ; If set to default, then
+    ;   In standalone mode the local database based asset service will be used
+    ;   In grid mode the grid asset service will be used for asset storage
+    ;   This is probably the setting that you want.
+    ;
+    ; If set to local then the local database based asset service will be used in standalone and grid modes
+    ; If set to grid then the grid based asset service will be used in standalone and grid modes
+    ; All other values will cause a search for a matching assembly that contains an asset server client.
+    ; See also: AssetCache
+    asset_database = "default"   
+
+    ; Persistence of changed objects happens during regular sweeps. The following control that behaviour to
+    ; prevent frequently changing objects from heavily loading the region data store.
+    ; If both of these values are set to zero then persistence of all changed objects will happen on every sweep.
+    ; 
+    ; Objects will be considered for persistance in the next sweep when they have not changed for this number of seconds
+    MinimumTimeBeforePersistenceConsidered = 60
+    ; Objects will always be considered for persistance in the next sweep if the first change occurred this number of seconds ago
+    MaximumTimeBeforePersistenceConsidered = 600
+
+    ; Should avatars in neighbor sims see objects in this sim?
+    see_into_this_sim_from_neighbor = True
+
+    ; ##
+    ; ## PHYSICS
+    ; ##
+
+    ; if you would like to allow prims to be physical and move by physics with the physical checkbox in the client set this to true.
+    physical_prim = true
+
+    ; Select a mesher here. ZeroMesher is save and fast.
+    ; ZeroMesher also means that the physics engine models the physics of prims
+    ; sticking to the basic shapes the engine does support. Usually this is only a box.
+    ; Meshmerizer gives a better handling of complex prims by using triangle meshes.
+    ; Note, that only ODE physics currently deals with meshed prims in a satisfactoring way
+    ;
+    meshing = ZeroMesher
+    ;meshing = Meshmerizer
+
+    ; Choose one of the physics engines below
+    physics = basicphysics
+    ;physics = POS
+    ;physics = OpenDynamicsEngine
+    ;physics = modified_BulletX
+
+    ; ##
+    ; ## PERMISSIONS
+    ; ##
+
+    ;permissionmodules = "DefaultPermissionsModule"
+
+    ; If set to false, then, in theory, the server never carries out permission checks (allowing anybody to copy
+    ; any item, etc.  This may not yet be implemented uniformally.
+    ; If set to true, then all permissions checks are carried out
+    ; Default is false
+    serverside_object_permissions = false
+
+    allow_grid_gods = false
+
+    ; This allows somne control over permissions
+    ; please note that this still doesn't duplicate SL, and is not intended to
+    ;region_owner_is_god = true
+    ;parcel_owner_is_god = true
+
+    ; Control user types that are allowed to create new scripts
+    ; Only enforced if serviceside_object_permissions is true
+    ;   
+    ; Current possible values are 
+    ;     all - anyone can create scripts (subject to normal permissions)
+    ;     gods - only administrators can create scripts (as long as allow_grid_gods is true)
+    ; Default value is all 
+    ; allowed_script_creators = all
+
+    ; Control user types that are allowed to edit (save) scripts
+    ; Only enforced if serviceside_object_permissions is true
+    ;   
+    ; Current possible values are 
+    ;     all - anyone can edit scripts (subject to normal permissions)
+    ;     gods - only administrators can edit scripts (as long as allow_grid_gods is true)
+    ; Default value is all 
+    ; allowed_script_editors = all
+
+    ; ##
+    ; ## SCRIPT ENGINE
+    ; ##
+
+    ;DefaultScriptEngine = "ScriptEngine.DotNetEngine"
+    DefaultScriptEngine = "XEngine"
+
+    ; ##
+    ; ## WORLD MAP
+    ; ##
+
+    ;WorldMapModule = "WorldMap"
+    ;MapImageModule = "MapImageModule"
+        
+    ; ##
+    ; ## Customized Cache Implementation
+    ; ##
+    ;
+    ; The AssetCache value allows the name of an alternative caching
+    ; implementation to be specified. This can normally be omitted.
+    ; This value corresponds to the provider value associated with the
+    ; intended cache implementation plugin.
+    ; See also: asset_database
+
+    ; AssetCache = "OpenSim.Framework.Communications.Cache.AssetCache"
+
+    ; ##
+    ; ## EMAIL MODULE
+    ; ##
+
+    ;emailmodule = DefaultEmailModule
+
+
+[StandAlone]
+    accounts_authenticate = true
+    welcome_message = "Welcome to OpenSimulator"
+
+    ; Asset database provider
+    asset_plugin = "OpenSim.Data.SQLite.dll"
+    ; asset_plugin = "OpenSim.Data.MySQL.dll" ; for mysql
+    ; asset_plugin = "OpenSim.Data.NHibernate.dll" ; for nhibernate
+
+    ; the Asset DB source.  This only works for sqlite, mysql, and nhibernate for now
+    ; Asset source SQLite example
+    asset_source = "URI=file:Asset.db,version=3"
+    ; Asset Source NHibernate example (DIALECT;DRIVER;CONNECTSTRING)
+    ; asset_source = "SQLiteDialect;SqliteClientDriver;URI=file:Asset.db,version=3"
+    ; Asset Source MySQL example
+    ;asset_source = "Data Source=localhost;Database=opensim;User ID=opensim;Password=****;"
+
+    ; Inventory database provider
+    inventory_plugin = "OpenSim.Data.SQLite.dll"
+    ; inventory_plugin = "OpenSim.Data.MySQL.dll"
+    ; inventory_plugin = "OpenSim.Data.NHibernate.dll" ; for nhibernate
+
+    ; Inventory source SQLite example
+    inventory_source = "URI=file:inventoryStore.db,version=3"
+    ; Inventory Source NHibernate example (DIALECT;DRIVER;CONNECTSTRING)
+    ; inventory_source = "SQLiteDialect;SqliteClientDriver;URI=file:Inventory.db,version=3"
+    ; Inventory Source MySQL example
+    ;inventory_source = "Data Source=localhost;Database=opensim;User ID=opensim;Password=****;"
+
+    ; User Data Database provider
+    ;
+    ; Multiple providers can be specified by separating them with commas (whitespace is unimportant)
+    ; If multiple providers are specified then if a profile is requested, each is queried until one
+    ; provides a valid profile, or until all providers have been queried.
+    ; Unfortunately the order of querying is currently undefined (it may not be the order in which
+    ; providers are specified here).  This needs to be fixed
+    ;
+    userDatabase_plugin = "OpenSim.Data.SQLite.dll"
+    ; userDatabase_plugin = "OpenSim.Data.MySQL.dll"
+    ; userDatabase_plugin = "OpenSim.Data.NHibernate.dll" ; for nhibernate
+
+    ; User source SQLite example
+    user_source = "URI=file:userprofiles.db,version=3"
+    ; User Source NHibernate Example (DIALECT;DRIVER;CONNECTSTRING)
+    ; user_source = "SQLiteDialect;SqliteClientDriver;URI=file:User.db,version=3"
+    ; User Source MySQL example
+    ;user_source = "Data Source=localhost;Database=opensim;User ID=opensim;Password=****;"
+
+    ; Specifies the location and filename of the default inventory library control file.  The path can be relative or absolute
+    ; Default is ./inventory/Libraries.xml
+    LibrariesXMLFile="./inventory/Libraries.xml"
+    
+    ; Specifies the location and filename of the inventory library assets control file.  The path can be relative or absolute
+    ; Setting is optional. Default is ./assets/AssetSets.xml
+    AssetSetsXMLFile="./assets/AssetSets.xml"
+
+    dump_assets_to_file = false
+
+
+[Network]
+    http_listener_port = 9000
+    default_location_x = 1000
+    default_location_y = 1000
+
+    ; ssl config: Experimental!  The auto https config only really works definately on windows XP now
+    ; you need a Cert Request/Signed pair installed in the MY store with the CN specified below
+    ; you can use https on other platforms, but you'll need to configure the httpapi yourself for now
+    http_listener_ssl = false ; Also create a SSL server
+    http_listener_cn = "localhost" ; Use the cert with the common name
+    http_listener_sslport = 9001 ; Use this port for SSL connections
+    http_listener_ssl_cert = "" ; Currently unused, but will be used for OSHttpServer
+
+    ; Uncomment below to enable llRemoteData/remote channels
+    ; remoteDataPort = 20800
+
+    grid_server_url = "http://127.0.0.1:8001"
+    grid_send_key = "null"
+    grid_recv_key = "null"
+
+    user_server_url = "http://127.0.0.1:8002"
+    user_send_key = "null"
+    user_recv_key = "null"
+
+    asset_server_url = "http://127.0.0.1:8003"
+
+    inventory_server_url = "http://127.0.0.1:8004"
+
+    ; The MessagingServer is a companion of the UserServer. It uses
+    ; user_send_key and user_recv_key, too
+    messaging_server_url = "http://127.0.0.1:8006"
+
+    ; What is reported as the "X-Secondlife-Shard"
+    ; Defaults to the user server url if not set
+    ; The old default is "OpenSim", set here fro compatibility
+    shard = "OpenSim"
+
+    ; What is reported as the "User-Agent" when using llHTTPRequest
+    ; Defaults to not sent if not set here. See the notes section in the wiki at
+    ; http://wiki.secondlife.com/wiki/LlHTTPRequest for comments on adding
+    ; " (Mozilla Compatible)" to the text where there are problems with a web server
+    ;user_agent = "OpenSim LSL (Mozilla Compatible)"
diff --git a/bin/config.preview.donotuseyet/protocols/client/lindenlab.ini.example b/bin/config.preview.donotuseyet/protocols/client/lindenlab.ini.example
new file mode 100644
index 0000000..965e1c7
--- /dev/null
+++ b/bin/config.preview.donotuseyet/protocols/client/lindenlab.ini.example
@@ -0,0 +1,27 @@
+; This file shows initialization defaults for OpenSimulator.  If you want to override these
+; please copy/rename this file from .ini.example file to .ini.  For example
+;
+; chat.ini.example => chat.ini
+;
+; or you can copy and paste the settings from this file directly to bin/OpenSim.ini
+;
+
+[ClientStack.LindenUDP]
+    ; This is the multiplier applied to all client throttles for outgoing UDP network data
+    ; If it is set to 1, then we obey the throttle settings as given to us by the client.  If it is set to 3, for example, then we 
+    ; multiply that setting by 3 (e.g. if the client gives us a setting of 250 kilobits per second then we
+    ; will actually push down data at a maximum rate of 750 kilobits per second).
+    ; 
+    ; In principle, setting a multiplier greater than 1 will allow data to be pushed down to a client much faster
+    ; than its UI allows the setting to go.  This may be okay in some situations, such as standalone OpenSim
+    ; applications on a LAN.  However, the greater the multipler, the higher the risk of packet drop, resulting
+    ; in symptoms such as missing terrain or objects.  A much better solution is to change the client UI to allow
+    ; higher network bandwidth settings directly, though this isn't always possible.
+    ;
+    ; Currently this setting is 2 by default because we currently send much more texture data than is strictly
+    ; necessary.  A setting of 1 could result in slow texture transfer.  This will be fixed when the transfer
+    ; of textures at different levels of quality is improved.
+    ; 
+    ; Pre r7113, this setting was not exposed but was effectively 8.  You may want to try this if you encounter
+    ; unexpected difficulties
+    client_throttle_multiplier = 2;
diff --git a/bin/config.preview.donotuseyet/protocols/grid/interregion.ini.example b/bin/config.preview.donotuseyet/protocols/grid/interregion.ini.example
new file mode 100644
index 0000000..0199636
--- /dev/null
+++ b/bin/config.preview.donotuseyet/protocols/grid/interregion.ini.example
@@ -0,0 +1,12 @@
+; This file shows initialization defaults for OpenSimulator.  If you want to override these
+; please copy/rename this file from .ini.example file to .ini.  For example
+;
+; chat.ini.example => chat.ini
+;
+; or you can copy and paste the settings from this file directly to bin/OpenSim.ini
+;
+
+[Communications]
+
+;InterregionComms = "LocalComms"
+InterregionComms = "RESTComms"
diff --git a/bin/config.preview.donotuseyet/protocols/intergrid/ogp.ini.example b/bin/config.preview.donotuseyet/protocols/intergrid/ogp.ini.example
new file mode 100644
index 0000000..90afcf0
--- /dev/null
+++ b/bin/config.preview.donotuseyet/protocols/intergrid/ogp.ini.example
@@ -0,0 +1,16 @@
+; This file shows initialization defaults for OpenSimulator.  If you want to override these
+; please copy/rename this file from .ini.example file to .ini.  For example
+;
+; chat.ini.example => chat.ini
+;
+; or you can copy and paste the settings from this file directly to bin/OpenSim.ini
+;
+
+[OpenGridProtocol]
+    ;These are the settings for the Open Grid Protocol..  the Agent Domain, Region Domain,   you know..
+    ;On/true or Off/false
+    ogp_enabled=false
+
+    ;Name Prefix/suffix when using OGP
+    ogp_firstname_prefix=""
+    ogp_lastname_suffix="_EXTERNAL"
diff --git a/bin/config.preview.donotuseyet/region/physics/engines/ode.ini.example b/bin/config.preview.donotuseyet/region/physics/engines/ode.ini.example
new file mode 100644
index 0000000..ec9380a
--- /dev/null
+++ b/bin/config.preview.donotuseyet/region/physics/engines/ode.ini.example
@@ -0,0 +1,161 @@
+; This file shows initialization defaults for OpenSimulator.  If you want to override these
+; please copy/rename this file from .ini.example file to .ini.  For example
+;
+; chat.ini.example => chat.ini
+;
+; or you can copy and paste the settings from this file directly to bin/OpenSim.ini
+;
+
+[ODEPhysicsSettings]
+    ;##
+    ;## World Settings
+    ;##
+
+    ;Gravity.  Feel like falling up?  change world_gravityz to 9.8 instead of -9.8.  m/s
+    world_gravityx = 0
+    world_gravityy = 0
+    world_gravityz = -9.8
+
+    ; World Step size. (warning these are dangerous.  Changing these will probably cause your scene to explode dramatically)
+    ; reference: fps = (0.09375/ODE_STEPSIZE) * 1000;
+    world_stepsize = 0.020
+    world_internal_steps_without_collisions = 10
+
+    ;World Space settings. Affects memory consumption vs Collider CPU time for avatar and physical prim
+    world_hashspace_size_low = -4
+    world_hashSpace_size_high = 128
+
+    ;Dynamic space settings Affects memory consumption vs Collider CPU time for static prim
+    meters_in_small_space = 29.9
+    small_hashspace_size_low = -4
+    small_hashspace_size_high = 66
+
+    ; ##
+    ; ## Contact properties. (the stuff that happens when things come in contact with each other)
+    ; ##
+
+    ; surface layer around geometries other geometries can sink into before generating a contact
+    world_contact_surface_layer = 0.001
+
+    ; Filtering Collisions helps keep things stable physics wise, but sometimes 
+    ; it can be over zealous.  If you notice bouncing, chances are it's being just
+    ; that
+    filter_collisions = false
+
+    ; Non Moving Terrain Contact (avatar isn't moving)
+    nm_terraincontact_friction = 255.0
+    nm_terraincontact_bounce = 0.1
+    nm_terraincontact_erp = 0.1025
+
+    ; Moving Terrain Contact (avatar is moving)
+    m_terraincontact_friction = 75.0
+    m_terraincontact_bounce = 0.05
+    m_terrainContact_erp = 0.05025
+
+    ; Moving Avatar to object Contact
+    m_avatarobjectcontact_friction = 75.0
+    m_avatarobjectcontact_bounce = 0.1
+
+    ; Object to Object Contact and Non-Moving Avatar to object
+    objectcontact_friction = 250.0
+    objectcontact_bounce = 0.2
+
+    ; ##
+    ; ## Avatar Control
+    ; ##
+
+    ; PID Controller Settings. These affect the math that causes the avatar to reach the
+    ; desired velocity
+    ; See http://en.wikipedia.org/wiki/PID_controller
+
+    av_pid_derivative_linux = 2200.0
+    av_pid_proportional_linux = 900.0;
+
+    av_pid_derivative_win = 2200.0
+    av_pid_proportional_win = 900.0;
+
+    ;girth of the avatar.  Adds radius to the height also
+    av_capsule_radius = 0.37
+
+    ; Max force permissible to use to keep the avatar standing up straight
+    av_capsule_standup_tensor_win = 550000
+    av_capsule_standup_tensor_linux = 550000
+
+    ; used to calculate mass of avatar.
+    ; float AVvolume = (float) (Math.PI*Math.Pow(CAPSULE_RADIUS, 2)*CAPSULE_LENGTH);
+    ; av_density * AVvolume;
+    av_density = 80
+
+    ; use this value to cut 52% of the height the sim gives us
+    av_height_fudge_factor = 0.52
+
+    ; Movement.  Smaller is faster.
+
+    ; speed of movement with Always Run off
+    av_movement_divisor_walk = 1.3
+
+    ; speed of movement with Always Run on
+    av_movement_divisor_run = 0.8
+
+    ; When the avatar flies, it will be moved up by this amount off the ground (in meters)
+    minimum_ground_flight_offset = 3.0
+
+    ; ##
+    ; ## Object options
+    ; ##
+
+    ; used in the mass calculation.
+    geometry_default_density = 10.000006836
+
+    ; amount of ODE steps where object is non moving for ODE to automatically put it to sleep
+    body_frames_auto_disable = 20
+
+    ; used to control llMove2Target
+    body_pid_derivative = 35
+    body_pid_gain = 25
+
+    ; amount of time a geom/body will try to cross a region border before it gets disabled
+    geom_crossing_failures_before_outofbounds = 5
+
+    ; start throttling the object updates if object comes in contact with 3 or more other objects
+    geom_contactpoints_start_throttling = 3
+
+    ; send 1 update for every x updates below when throttled
+    geom_updates_before_throttled_update = 15
+
+    ; Used for llSetStatus.  How rigid the object rotation is held on the axis specified
+    body_motor_joint_maxforce_tensor_linux = 5
+    body_motor_joint_maxforce_tensor_win = 5
+
+    ; ##
+    ; ## Sculpted Prim settings
+    ; ##
+
+    ; Do we want to mesh sculpted prim to collide like they look?
+    mesh_sculpted_prim = true
+
+    ; number^2 non-physical level of detail of the sculpt texture.  32x32 - 1024 verticies
+    mesh_lod = 32
+
+    ; number^2 physical level of detail of the sculpt texture.  16x16 - 256 verticies
+    mesh_physical_lod = 16
+
+    ; ##
+    ; ## Physics logging settings - logfiles are saved to *.DIF files
+    ; ##
+
+    ; default is false
+    ;physics_logging = true
+    ;; every n simulation iterations, the physics snapshot file is updated
+    ;physics_logging_interval = 50
+    ;; append to existing physics logfile, or overwrite existing logfiles?
+    ;physics_logging_append_existing_logfile = true
+
+    ; ##
+    ; ## Joint support
+    ; ##
+
+    ; if you would like physics joints to be enabled through a special naming convention in the client, set this to true. 
+    ; (see NINJA Physics documentation, http://opensimulator.org/wiki/NINJA_Physics)
+    ; default is false
+    ;use_NINJA_physics_joints = true
diff --git a/bin/config.preview.donotuseyet/region/scripting/engines/dotnetengine.ini.example b/bin/config.preview.donotuseyet/region/scripting/engines/dotnetengine.ini.example
new file mode 100644
index 0000000..ee624de
--- /dev/null
+++ b/bin/config.preview.donotuseyet/region/scripting/engines/dotnetengine.ini.example
@@ -0,0 +1,128 @@
+; This file shows initialization defaults for OpenSimulator.  If you want to override these
+; please copy/rename this file from .ini.example file to .ini.  For example
+;
+; chat.ini.example => chat.ini
+;
+; or you can copy and paste the settings from this file directly to bin/OpenSim.ini
+;
+
+[ScriptEngine.DotNetEngine]
+    Enabled = true
+
+    ScriptDelayFactor = 1.0
+    ScriptDistanceLimitFactor = 1.0
+
+    ;
+    ; These settings are specific to DotNetEngine script engine
+    ; Other script engines based on OpenSim.Region.ScriptEngine.Common.dll will have almost identical settings, but in another section of this config file.
+    ;
+
+    ; When a script receives an event the event is queued.
+    ; Any free thread will start executing this event. One script can only have one event executed simultaneously.
+    ; If you have only one thread, and one script has a loop or does a lot of work, then no other scripts can run at the same time.
+    ; Same if you have 10 threads, then only 10 scripts can be run simultaneously.
+    ; But because most scripts exit after their task, the threads are free to go on to the next script.
+
+    ; Refresh ScriptEngine config options (these settings) every xx seconds
+    ; 0 = Do not refresh
+    ; Set it to number of seconds between refresh, for example 30.
+    ; Will allow you to change ScriptEngine settings while server is running just by using "CONFIG SET" on console
+    ; For example to increase or decrease number of threads: CONFIG SET NumberOfScriptThreads 10
+    ; NOTE! Disabled for now. Feature does not work.
+    RefreshConfig=0
+
+    ; Number of threads to use for script event execution
+    ; Threads are shared across all regions
+    NumberOfScriptThreads=2
+
+    ; Script event execution thread priority inside application.
+    ; Valid values: Lowest, BelowNormal, Normal, AboveNormal, Highest
+    ScriptThreadPriority=BelowNormal
+
+    ; How long MAX should a script event be allowed to run (per event execution)?
+    ; Do not set this too low (like 50ms) as there are some time wasted in simply executing a function
+    ; There is also a small speed penalty for every kill that is made
+    MaxEventExecutionTimeMs=5000
+
+    ; Should we enable the max script event execution thread to look for scripts that exceed their timeslice?
+    EnforceMaxEventExecutionTime=true
+
+    ; Should we stop the script completely when time exceeds?
+    ; This is useful if you have a high <MaxEventExecutionTimeMs> and want to deactivate scripts that go wrong
+    ; Note that for example physics engine can slow down the system and make scripts spend more time
+    DeactivateScriptOnTimeout=false
+
+    ; If no scripts have executed in this pass how long should we sleep before checking again
+    ; Impact:
+    ; Too low and you will waste lots of CPU
+    ; Too high and people touching object or similar will have to wait up to this amount of time before script responding
+    SleepTimeIfNoScriptExecutionMs=50
+
+    ; AppDomains are used for two things:
+    ; * Security: Scripts inside AppDomains are limited in permissions.
+    ; * Script unloading: When a script is deactivated it can not be unloaded. Only whole AppDomains can be unloaded.
+    ;                     AppDomains are therefore only unloaded once ALL active scripts inside it has been deactivated (removed from prims).
+    ; Each AppDomain has some memory overhead. But leaving dead scripts in memory also has memory overhead.
+    ScriptsPerAppDomain=1
+
+    ; MaintenanceLoop
+    ; How often to run maintenance loop
+    ; Maintenance loop is doing: script compile/load, script unload, reload config, adjust running config and enforce max execution time
+    MaintenanceLoopms=50
+
+    ; How many maintenanceloops between each of these.
+    ; (if 2 then function will be executed every MaintenanceLoopms*2 ms)
+    ; Script loading/unloading
+
+    ; How long load/unload thread should sleep if there is nothing to do
+    ; Higher value makes it respond slower when scripts are added/removed from prims
+    ; But once active it will process all in queue before sleeping again
+    MaintenanceLoopTicks_ScriptLoadUnload=1
+
+    ; Other tasks
+    ; check if we need to reload config, adjust running config and enforce max execution time
+    MaintenanceLoopTicks_Other=10
+
+    ; Allow the use of os* functions (some are dangerous)
+    ; Default is false
+    AllowOSFunctions = false
+
+    ; Threat level to allow if os functions are enabled
+    ; One of None, VeryLow, Low, Moderate, High, VeryHigh, Severe
+    ; Default is VeryLow
+    OSFunctionThreatLevel = VeryLow
+
+    ; Maximum number of items in load/unload queue before we start rejecting loads
+    ; Note that we will only be rejecting load. Unloads will still be able to queue.
+    LoadUnloadMaxQueueSize=100
+
+    ; Maximum number of (LSL) events that can be queued before new events are ignored.
+    EventExecutionMaxQueueSize=300
+
+    ; Async LL command sleep
+    ; If no async LL commands are waiting, how long should thread sleep before checking again
+    ; Async LL commands are LSL-commands that causes an event to be fired back with result
+    ; currently unused
+    ; AsyncLLCommandLoopms=50
+
+    ; When script is converted from LSL to C#, or just plain compiled, a copy of the script source will be put in the ScriptEngine folder
+    WriteScriptSourceToDebugFile=false
+
+    ; Specify default script compiler
+    ; If you do not specify //cs, //vb, //js or //lsl tag as the first characters of your script then the default compiler will be chosen
+    ; Valid languages are: lsl, cs, js and vb
+    DefaultCompileLanguage=lsl
+
+    ; Specify what compilers are allowed to be used
+    ; Note vb only works on Windows for now (Mono lacks VB compile support)
+    ; Valid languages are: lsl, cs, js and vb
+    ; AllowedCompilers=lsl,cs,js,vb.  *warning*, non lsl languages have access to static methods such as System.IO.File.  Enable at your own risk.
+    AllowedCompilers=lsl
+
+    ; Compile scripts with debugging
+    ; Probably a thousand times slower, but gives you a line number when something goes wrong.
+    CompileWithDebugInformation=true
+
+    ; Remove old scripts on next startup
+    ; currently unused
+    ;CleanUpOldScriptsOnStartup=true
diff --git a/bin/config.preview.donotuseyet/region/scripting/engines/mrm.ini.example b/bin/config.preview.donotuseyet/region/scripting/engines/mrm.ini.example
new file mode 100644
index 0000000..0c194ae
--- /dev/null
+++ b/bin/config.preview.donotuseyet/region/scripting/engines/mrm.ini.example
@@ -0,0 +1,12 @@
+; This file shows initialization defaults for OpenSimulator.  If you want to override these
+; please copy/rename this file from .ini.example file to .ini.  For example
+;
+; chat.ini.example => chat.ini
+;
+; or you can copy and paste the settings from this file directly to bin/OpenSim.ini
+;
+
+[MRM]
+    ; Enables the Mini Region Modules Script Engine. WARNING: SECURITY RISK.
+    ; default is false
+          Enabled = false 
diff --git a/bin/config.preview.donotuseyet/region/scripting/engines/xengine.ini.example b/bin/config.preview.donotuseyet/region/scripting/engines/xengine.ini.example
new file mode 100644
index 0000000..b65e422
--- /dev/null
+++ b/bin/config.preview.donotuseyet/region/scripting/engines/xengine.ini.example
@@ -0,0 +1,88 @@
+; This file shows initialization defaults for OpenSimulator.  If you want to override these
+; please copy/rename this file from .ini.example file to .ini.  For example
+;
+; chat.ini.example => chat.ini
+;
+; or you can copy and paste the settings from this file directly to bin/OpenSim.ini
+;
+
+[XEngine]
+    ; Enable this engine in this OpenSim instance
+    Enabled = true
+
+    ; How many threads to keep alive even if nothing is happening
+    MinThreads = 2
+
+    ; How many threads to start at maximum load
+    MaxThreads = 100
+
+    ; Time a thread must be idle (in seconds) before it dies
+    IdleTimeout = 60
+
+    ; Thread priority ("Lowest", "BelowNormal", "Normal", "AboveNormal", "Highest")
+    Priority = "BelowNormal"
+
+    ; Maximum number of events to queue for a script (excluding timers)
+    MaxScriptEventQueue = 300
+
+    ; Stack size per thread created
+    ThreadStackSize = 262144
+
+    ; Rate to poll for asynchronous command replies (ms)
+    ; currently unused
+    ;AsyncLLCommandLoopms = 50
+
+    ; Save the source of all compiled scripts
+    WriteScriptSourceToDebugFile = false
+
+    ; Default language for scripts
+    DefaultCompileLanguage = lsl
+
+    ; List of allowed languages (lsl,vb,js,cs)
+    ; AllowedCompilers=lsl,cs,js,vb.  
+    ; *warning*, non lsl languages have access to static methods such as System.IO.File.  Enable at your own risk.
+    AllowedCompilers=lsl
+
+    ; Compile debug info (line numbers) into the script assemblies
+    CompileWithDebugInformation = true
+
+    ; Allow the use of os* functions (some are dangerous)
+    AllowOSFunctions = false
+
+    ; Threat level to allow, one of None, VeryLow, Low, Moderate, High, VeryHigh, Severe
+    OSFunctionThreatLevel = VeryLow
+
+    ; Interval (s) between background save of script states
+    SaveInterval = 120
+
+    ; Interval (s) between maintenance runs (0 = disable)
+    MaintenanceInterval = 10
+
+    ; Time a script can spend in an event handler before it is interrupted
+    EventLimit = 30
+
+    ; If a script overruns it's event limit, kill the script?
+    KillTimedOutScripts = false
+
+    ; Sets the multiplier for the scripting delays
+    ScriptDelayFactor = 1.0
+
+    ; The factor the 10 m distances llimits are multiplied by
+    ScriptDistanceLimitFactor = 1.0
+
+    ; OS Functions enable/disable
+    ; For each function, you can add one line, as shown
+    ; The default for all functions allows them if below threat level
+
+    ; true allows the use of the function unconditionally
+    ; Allow_osSetRegionWaterHeight = true
+
+    ; false disables the function completely
+    ; Allow_osSetRegionWaterHeight = false
+
+    ; Comma separated list of UUIDS allows the function for that list of UUIDS
+    ; Allow_osSetRegionWaterHeight = 888760cb-a3cf-43ac-8ea4-8732fd3ee2bb
+
+    ; Allow for llCreateLink and llBreakLink to work without asking for permission 
+    ; only enable this in a trusted environment otherwise you may be subject to hijacking
+    ; AutomaticLinkPermission = false
diff --git a/bin/config.preview.donotuseyet/region/scripting/ll-functions.ini.example b/bin/config.preview.donotuseyet/region/scripting/ll-functions.ini.example
new file mode 100644
index 0000000..e7ab7a9
--- /dev/null
+++ b/bin/config.preview.donotuseyet/region/scripting/ll-functions.ini.example
@@ -0,0 +1,18 @@
+; This file shows initialization defaults for OpenSimulator.  If you want to override these
+; please copy/rename this file from .ini.example file to .ini.  For example
+;
+; chat.ini.example => chat.ini
+;
+; or you can copy and paste the settings from this file directly to bin/OpenSim.ini
+;
+
+[LL-Functions]
+    ; Set the following to true to allow administrator owned scripts to execute console commands
+    ; currently unused
+    ; AllowosConsoleCommand=false
+
+    AllowGodFunctions = false
+
+    ; Maximum number of llListen events we allow per script
+    ; Set this to 0 to have no limit imposed.
+    max_listens_per_script = 64
diff --git a/bin/config.preview.donotuseyet/region/scripting/regionready.ini.example b/bin/config.preview.donotuseyet/region/scripting/regionready.ini.example
new file mode 100644
index 0000000..611b81b
--- /dev/null
+++ b/bin/config.preview.donotuseyet/region/scripting/regionready.ini.example
@@ -0,0 +1,19 @@
+; This file shows initialization defaults for OpenSimulator.  If you want to override these
+; please copy/rename this file from .ini.example file to .ini.  For example
+;
+; chat.ini.example => chat.ini
+;
+; or you can copy and paste the settings from this file directly to bin/OpenSim.ini
+;
+
+[RegionReady]
+    ; Enable this module to get notified once all items and scripts in the region have been completely loaded and compiled
+    ; default is false
+    enabled = false
+
+    ; Channel on which to signal region readiness through a message
+    ; formatted as follows: "{0|1},n,[oar error]"
+    ; - the first number indicating whether the OAR file loaded ok (1 == ok, 0 == error)
+    ; - the second number indicates how many scrips failed to compile
+    ; - "oar error" if supplied, provides the error message from the OAR load
+    channel_notify = -800
diff --git a/bin/config.preview.donotuseyet/region/scripting/smtp.ini.example b/bin/config.preview.donotuseyet/region/scripting/smtp.ini.example
new file mode 100644
index 0000000..5b423ab
--- /dev/null
+++ b/bin/config.preview.donotuseyet/region/scripting/smtp.ini.example
@@ -0,0 +1,19 @@
+; This file shows initialization defaults for OpenSimulator.  If you want to override these
+; please copy/rename this file from .ini.example file to .ini.  For example
+;
+; chat.ini.example => chat.ini
+;
+; or you can copy and paste the settings from this file directly to bin/OpenSim.ini
+;
+
+[SMTP]
+
+    enabled=false
+
+    ;enabled=true
+    ;internal_object_host=lsl.opensim.local
+    ;host_domain_header_from=127.0.0.1
+    ;SMTP_SERVER_HOSTNAME=127.0.0.1
+    ;SMTP_SERVER_PORT=25
+    ;SMTP_SERVER_LOGIN=foo
+    ;SMTP_SERVER_PASSWORD=bar
diff --git a/bin/config.preview.donotuseyet/region/user/chat/chat.ini.example b/bin/config.preview.donotuseyet/region/user/chat/chat.ini.example
new file mode 100644
index 0000000..4e39256
--- /dev/null
+++ b/bin/config.preview.donotuseyet/region/user/chat/chat.ini.example
@@ -0,0 +1,20 @@
+; This file shows initialization defaults for OpenSimulator.  If you want to override these
+; please copy/rename this file from .ini.example file to .ini.  For example
+;
+; chat.ini.example => chat.ini
+;
+; or you can copy and paste the settings from this file directly to bin/OpenSim.ini
+;
+
+[Chat]
+    ; Controls whether the chat module is enabled.  Default is true.
+    enabled = true;
+
+    ; Distance in meters that whispers should travel.  Default is 10m
+    whisper_distance = 10
+
+    ; Distance in meters that ordinary chat should travel.  Default is 30m
+    say_distance = 30
+
+    ; Distance in meters that shouts should travel.  Default is 100m
+    shout_distance = 100
diff --git a/bin/config.preview.donotuseyet/region/user/chat/irc.ini.example b/bin/config.preview.donotuseyet/region/user/chat/irc.ini.example
new file mode 100644
index 0000000..a94a89e
--- /dev/null
+++ b/bin/config.preview.donotuseyet/region/user/chat/irc.ini.example
@@ -0,0 +1,61 @@
+; This file shows initialization defaults for OpenSimulator.  If you want to override these
+; please copy/rename this file from .ini.example file to .ini.  For example
+;
+; chat.ini.example => chat.ini
+;
+; or you can copy and paste the settings from this file directly to bin/OpenSim.ini
+;
+
+; Uncomment the following for IRC bridge
+; experimental, so if it breaks... keep both parts... yada yada
+; also, not good error detection when it fails
+;[IRC]
+    ;enabled = true ; you need to set this otherwise it won't connect
+    ;server  = name.of.irc.server.on.the.net
+    ;; user password - only use this if the server requires one
+    ;password = mypass
+    ;nick    = OpenSimBotNameProbablyMakeThisShorter
+    ;channel = #the_irc_channel_you_want_to_connect_to
+    ;port = 6667
+    ;; channel to listen for configuration commands
+    ;commands_enabled = false
+    ;command_channel = 2777
+    ;report_clients = true
+    ;; relay private chat connections
+    ;; relay_private_channels = true: will relay IRC chat from/to private in-world channels
+    ;; relay_private_channel_out -- channel to send messages out to the IRC bridge
+    ;; relay_private_channel_in -- channel to receive message from the IRC bridge
+    ;; relay_chat = false: IRC bridge will not relay normal chat
+    ;; access_password -- simple security device
+    ;;
+    ;; so, to just relay chat from an IRC channel to in-world region and vice versa:
+    ;;
+    ;;     relay_private_channels = false
+    ;;     relay_chat = true
+    ;;
+    ;; to relay chat only to/from private in-world channels:
+    ;;
+    ;;     relay_chat = false
+    ;;     relay_private_channels = true
+    ;;     relay_private_channel_in = 2226
+    ;;     relay_private_channel_out = 2225
+    ;;
+    ;; in this example, all chat coming in from IRC will be send out via
+    ;; in-world channel 2226, and all chat from in-world channel 2225 will
+    ;; be relayed to the IRC channel.
+    ;;
+    ;relay_private_channels = false
+    ;relay_private_channel_in = 2226
+    ;relay_private_channel_out = 2225
+    ;relay_chat = true
+    ;access_password = foobar
+
+    ;fallback_region = name of "default" region
+    ;MSGformat fields : 0=botnick, 1=user, 2=region, 3=message
+    ; must start with "PRIVMSG {0} : " or irc server will get upset
+    ;for <bot>:<user in region> :<message>
+    ;msgformat = "PRIVMSG {0} :<{1} in {2}>: {3}"
+    ;for <bot>:<message> - <user of region> :
+    msgformat = "PRIVMSG {0} : {3} - {1} of {2}"
+    ;for <bot>:<message> - from <user> :
+    ;msgformat = "PRIVMSG {0} : {3} - from {1}"
diff --git a/bin/config.preview.donotuseyet/region/user/chat/messaging.ini.example b/bin/config.preview.donotuseyet/region/user/chat/messaging.ini.example
new file mode 100644
index 0000000..f7f708b
--- /dev/null
+++ b/bin/config.preview.donotuseyet/region/user/chat/messaging.ini.example
@@ -0,0 +1,12 @@
+; This file shows initialization defaults for OpenSimulator.  If you want to override these
+; please copy/rename this file from .ini.example file to .ini.  For example
+;
+; chat.ini.example => chat.ini
+;
+; or you can copy and paste the settings from this file directly to bin/OpenSim.ini
+;
+
+[Messaging]
+    ; Control which region module is used for instant messaging.
+    ; Default is InstantMessageModule (this is the name of the core IM module as well as the setting)
+    InstantMessageModule = InstantMessageModule
diff --git a/bin/config.preview.donotuseyet/region/user/concierge.ini.example b/bin/config.preview.donotuseyet/region/user/concierge.ini.example
new file mode 100644
index 0000000..0f6f051
--- /dev/null
+++ b/bin/config.preview.donotuseyet/region/user/concierge.ini.example
@@ -0,0 +1,37 @@
+; This file shows initialization defaults for OpenSimulator.  If you want to override these
+; please copy/rename this file from .ini.example file to .ini.  For example
+;
+; chat.ini.example => chat.ini
+;
+; or you can copy and paste the settings from this file directly to bin/OpenSim.ini
+;
+
+[Concierge]
+    ; Enable concierge module
+    ; Default is false
+    enabled = false
+
+    ; name of the concierge
+    whoami = "jeeves"
+
+    ; password for updating the welcome message templates via XmlRpc
+    password = SECRET
+
+    ; regex specifying for which regions concierge service is desired; if
+    ; empty, then for all
+    regions = "^MeetingSpace-"
+
+    ; for each region that matches the regions regexp you can provide
+    ; (optionally) a welcome template using format substitution:
+    ; {0} is replaced with the name of the avatar entering the region
+    ; {1} is replaced with the name of the region
+    ; {2} is replaced with the name of the concierge (whoami variable above)
+
+    welcomes = /path/to/welcome/template/directory
+
+    ; Concierge can send attendee lists to an event broker whenever an
+    ; avatar enters or leaves a concierged region. the URL is subject
+    ; to format substitution:
+    ; {0} is replaced with the region's name
+    ; {1} is replaced with the region's UUID
+    broker = "http://broker.place.com/{1}"
diff --git a/bin/config.preview.donotuseyet/region/user/economy.ini.example b/bin/config.preview.donotuseyet/region/user/economy.ini.example
new file mode 100644
index 0000000..33343bf
--- /dev/null
+++ b/bin/config.preview.donotuseyet/region/user/economy.ini.example
@@ -0,0 +1,64 @@
+; This file shows initialization defaults for OpenSimulator.  If you want to override these
+; please copy/rename this file from .ini.example file to .ini.  For example
+;
+; chat.ini.example => chat.ini
+;
+; or you can copy and paste the settings from this file directly to bin/OpenSim.ini
+;
+
+[Economy]
+    ; These economy values get used in the BetaGridLikeMoneyModule.  - This module is for demonstration only -
+    ; In grid mode, use this currency XMLRPC server.  Leave blank for normal functionality
+    CurrencyServer = ""
+    ; "http://192.168.1.127/currency.php"
+
+    ; In grid mode, this is the land XMLRPC server. Leave blank for normal functionality
+    LandServer = ""
+    ;"http://192.168.1.127/landtool.php"
+
+    ; 45000 is the highest value that the sim could possibly report because of protocol constraints
+    ObjectCapacity = 45000
+
+    ; Money Unit fee to upload textures, animations etc
+    PriceUpload = 0
+
+    ; Money Unit fee to create groups
+    PriceGroupCreate = 0
+
+    ; This is the account Money goes to for fees.  Remember, economy requires that money circulates somewhere... even if it's an upload fee
+    EconomyBaseAccount = 00000000-0000-0000-0000-000000000000
+
+    ; This is the type of user that will pay fees.
+    ; Set this to 2 for users, estate managers and Estate Owners
+    ; Set this to 1 for Users and Estate Managers
+    ; Set this to 0 for Users only.
+    ; -1 disables
+    UserLevelPaysFees = -1
+
+    ; Amount to give to user as a stipend
+    UserStipend = 1000
+
+    ; When a user gets low on money units and logs off, then logs back on, issue a new stipend if they have less money units then this
+    ; amount. Be aware that the account money isn't stored anywhere so users will get a stipend if you restart the simulator
+    IssueStipendWhenClientIsBelowAmount = 10
+
+    ; If this is true, the simulator will remember account balances until the simulator is shutdown or restarted.
+    KeepMoneyAcrossLogins = true
+
+    ; We don't really know what the rest of these values do.  These get sent to the client
+    ; These taken from Agni at a Public Telehub.  Change at your own risk.
+    ObjectCount = 0
+    PriceEnergyUnit = 100
+    PriceObjectClaim = 10
+    PricePublicObjectDecay = 4
+    PricePublicObjectDelete = 4
+    PriceParcelClaim = 1
+    PriceParcelClaimFactor = 1
+
+    PriceRentLight = 5
+    TeleportMinPrice = 2
+    TeleportPriceExponent = 2
+    EnergyEfficiency = 1
+    PriceObjectRent = 1
+    PriceObjectScaleFactor = 10
+    PriceParcelRent = 1
diff --git a/bin/config.preview.donotuseyet/region/user/voice/asterisk.ini.example b/bin/config.preview.donotuseyet/region/user/voice/asterisk.ini.example
new file mode 100644
index 0000000..fc0b0e8
--- /dev/null
+++ b/bin/config.preview.donotuseyet/region/user/voice/asterisk.ini.example
@@ -0,0 +1,23 @@
+; This file shows initialization defaults for OpenSimulator.  If you want to override these
+; please copy/rename this file from .ini.example file to .ini.  For example
+;
+; chat.ini.example => chat.ini
+;
+; or you can copy and paste the settings from this file directly to bin/OpenSim.ini
+;
+
+[AsteriskVoice]
+    ; PLEASE NOTE that we don't have voice support in OpenSim quite yet - these configuration options are stubs
+    enabled = false
+    ; SIP account server domain
+    sip_domain = testserver.com
+    ; SIP conf server domain
+    conf_domain = testserver.com
+    ; URL of the asterisk opensim frontend
+    asterisk_frontend = http://testserver.com:49153/
+    ; password for the asterisk frontend XmlRpc calls
+    asterisk_password = bah-humbug
+    ; timeout for XmlRpc calls to asterisk front end (in ms)
+    asterisk_timeout = 3000
+    ; salt for asterisk nonces
+    asterisk_salt = paluempalum
diff --git a/bin/config.preview.donotuseyet/region/user/voice/voice.ini.example b/bin/config.preview.donotuseyet/region/user/voice/voice.ini.example
new file mode 100644
index 0000000..6485f20
--- /dev/null
+++ b/bin/config.preview.donotuseyet/region/user/voice/voice.ini.example
@@ -0,0 +1,17 @@
+; This file shows initialization defaults for OpenSimulator.  If you want to override these
+; please copy/rename this file from .ini.example file to .ini.  For example
+;
+; chat.ini.example => chat.ini
+;
+; or you can copy and paste the settings from this file directly to bin/OpenSim.ini
+;
+
+[Voice]
+    ; PLEASE NOTE that we don't have voice support in OpenSim quite yet - these configuration options are stubs
+    enabled = false
+    ; This is not supported by the SLViewer right now and
+    ; hardcoded within the SL Viewer. Maybe it will be
+    ; changed in future. :-)
+    account_management_server = https://www.bhr.vivox.com/api2
+    ; Global SIP Server for conference calls
+    sip_domain = testserver.com
diff --git a/bin/config.preview.donotuseyet/region/world/contentmanagement/cms.ini.example b/bin/config.preview.donotuseyet/region/world/contentmanagement/cms.ini.example
new file mode 100644
index 0000000..d5a624d
--- /dev/null
+++ b/bin/config.preview.donotuseyet/region/world/contentmanagement/cms.ini.example
@@ -0,0 +1,11 @@
+; This file shows initialization defaults for OpenSimulator.  If you want to override these
+; please copy/rename this file from .ini.example file to .ini.  For example
+;
+; chat.ini.example => chat.ini
+;
+; or you can copy and paste the settings from this file directly to bin/OpenSim.ini
+;
+
+;[CMS]
+    ;enabled = true
+    ;channel = 345
diff --git a/bin/config.preview.donotuseyet/region/world/contentmanagement/datasnapshot.ini.example b/bin/config.preview.donotuseyet/region/world/contentmanagement/datasnapshot.ini.example
new file mode 100644
index 0000000..285fccf
--- /dev/null
+++ b/bin/config.preview.donotuseyet/region/world/contentmanagement/datasnapshot.ini.example
@@ -0,0 +1,33 @@
+; This file shows initialization defaults for OpenSimulator.  If you want to override these
+; please copy/rename this file from .ini.example file to .ini.  For example
+;
+; chat.ini.example => chat.ini
+;
+; or you can copy and paste the settings from this file directly to bin/OpenSim.ini
+;
+
+[DataSnapshot]
+    ; The following set of configs pertains to search.
+    ; Set index_sims to true to enable search engines to index your searchable data
+    ; If false, no data will be exposed, DataSnapshot module will be off, and you can ignore the rest of these search-related configs
+    ; default is false
+    index_sims = false
+
+    ; The variable data_exposure controls what the regions expose:
+    ;    minimum: exposes only things explicitly marked for search
+    ;    all: exposes everything
+    data_exposure = minimum
+
+    ; If search is on, change this to your grid name; will be ignored for standalones
+    gridname = "OSGrid"
+
+    ; Period between data snapshots, in seconds. 20 minutes, for starters, so that you see the initial changes fast.
+    ; Later, you may want to increase this to 3600 (1 hour) or more
+    default_snapshot_period = 1200
+
+    ; This will be created in bin, if it doesn't exist already. It will hold the data snapshots.
+    snapshot_cache_directory = "DataSnapshot"
+
+    ; This semicolon-separated string serves to notify specific data services about the existence 
+    ; of this sim. Uncomment if you want to index your data with this and/or other search providers.
+    ;data_services="http://metaverseink.com/cgi-bin/register.py"
diff --git a/bin/config.preview.donotuseyet/region/world/contentmanagement/svn.ini.example b/bin/config.preview.donotuseyet/region/world/contentmanagement/svn.ini.example
new file mode 100644
index 0000000..802c143
--- /dev/null
+++ b/bin/config.preview.donotuseyet/region/world/contentmanagement/svn.ini.example
@@ -0,0 +1,17 @@
+; This file shows initialization defaults for OpenSimulator.  If you want to override these
+; please copy/rename this file from .ini.example file to .ini.  For example
+;
+; chat.ini.example => chat.ini
+;
+; or you can copy and paste the settings from this file directly to bin/OpenSim.ini
+;
+
+[SVN]
+    Enabled = false
+    Directory = SVNmodule\repo
+    URL = "svn://your.repo.here/"
+    Username = "user"
+    Password = "password"
+    ImportOnStartup = false
+    Autosave = false
+    AutoSavePeriod = 15 ; Number of minutes between autosave backups
diff --git a/bin/config.preview.donotuseyet/region/world/sun.ini.example b/bin/config.preview.donotuseyet/region/world/sun.ini.example
new file mode 100644
index 0000000..b98a74e
--- /dev/null
+++ b/bin/config.preview.donotuseyet/region/world/sun.ini.example
@@ -0,0 +1,20 @@
+; This file shows initialization defaults for OpenSimulator.  If you want to override these
+; please copy/rename this file from .ini.example file to .ini.  For example
+;
+; chat.ini.example => chat.ini
+;
+; or you can copy and paste the settings from this file directly to bin/OpenSim.ini
+;
+
+; Uncomment the following to control the progression of daytime
+; in the Sim.  The defaults are what is shown below
+;[Sun]
+    ; number of wall clock hours for an opensim day.  24.0 would mean realtime
+    ;day_length = 4
+    ; Year length in days
+    ;year_length = 60
+    ; Day to Night Ratio
+    ;day_night_offset = 0.45
+    ; send a Sun update every update_interval # of frames.  A lower number will
+    ; make for smoother sun transition at the cost of network
+    ;update_interval = 100
diff --git a/bin/config.preview.donotuseyet/region/world/trees.ini.example b/bin/config.preview.donotuseyet/region/world/trees.ini.example
new file mode 100644
index 0000000..f3151ef
--- /dev/null
+++ b/bin/config.preview.donotuseyet/region/world/trees.ini.example
@@ -0,0 +1,15 @@
+; This file shows initialization defaults for OpenSimulator.  If you want to override these
+; please copy/rename this file from .ini.example file to .ini.  For example
+;
+; chat.ini.example => chat.ini
+;
+; or you can copy and paste the settings from this file directly to bin/OpenSim.ini
+;
+
+[Trees]
+    ; Enable this to allow the tree module to manage your sim trees, including growing, reproducing and dying
+    ; default is false
+    active_trees = false
+
+    ; Density of tree population
+    tree_density = 1000.0