* Config preview round 2

6 files changed, 0 insertions, 285 deletions

diff --git a/bin/config.preview.donotuseyet/region/scripting/engines/dotnetengine.ini.example b/bin/config.preview.donotuseyet/region/scripting/engines/dotnetengine.ini.example
deleted file mode 100644
index ee624de..0000000
--- a/bin/config.preview.donotuseyet/region/scripting/engines/dotnetengine.ini.example
+++ /dev/null
@@ -1,128 +0,0 @@
-; This file shows initialization defaults for OpenSimulator.  If you want to override these
-; please copy/rename this file from .ini.example file to .ini.  For example
-;
-; chat.ini.example => chat.ini
-;
-; or you can copy and paste the settings from this file directly to bin/OpenSim.ini
-;
-
-[ScriptEngine.DotNetEngine]
-    Enabled = true
-
-    ScriptDelayFactor = 1.0
-    ScriptDistanceLimitFactor = 1.0
-
-    ;
-    ; These settings are specific to DotNetEngine script engine
-    ; Other script engines based on OpenSim.Region.ScriptEngine.Common.dll will have almost identical settings, but in another section of this config file.
-    ;
-
-    ; When a script receives an event the event is queued.
-    ; Any free thread will start executing this event. One script can only have one event executed simultaneously.
-    ; If you have only one thread, and one script has a loop or does a lot of work, then no other scripts can run at the same time.
-    ; Same if you have 10 threads, then only 10 scripts can be run simultaneously.
-    ; But because most scripts exit after their task, the threads are free to go on to the next script.
-
-    ; Refresh ScriptEngine config options (these settings) every xx seconds
-    ; 0 = Do not refresh
-    ; Set it to number of seconds between refresh, for example 30.
-    ; Will allow you to change ScriptEngine settings while server is running just by using "CONFIG SET" on console
-    ; For example to increase or decrease number of threads: CONFIG SET NumberOfScriptThreads 10
-    ; NOTE! Disabled for now. Feature does not work.
-    RefreshConfig=0
-
-    ; Number of threads to use for script event execution
-    ; Threads are shared across all regions
-    NumberOfScriptThreads=2
-
-    ; Script event execution thread priority inside application.
-    ; Valid values: Lowest, BelowNormal, Normal, AboveNormal, Highest
-    ScriptThreadPriority=BelowNormal
-
-    ; How long MAX should a script event be allowed to run (per event execution)?
-    ; Do not set this too low (like 50ms) as there are some time wasted in simply executing a function
-    ; There is also a small speed penalty for every kill that is made
-    MaxEventExecutionTimeMs=5000
-
-    ; Should we enable the max script event execution thread to look for scripts that exceed their timeslice?
-    EnforceMaxEventExecutionTime=true
-
-    ; Should we stop the script completely when time exceeds?
-    ; This is useful if you have a high <MaxEventExecutionTimeMs> and want to deactivate scripts that go wrong
-    ; Note that for example physics engine can slow down the system and make scripts spend more time
-    DeactivateScriptOnTimeout=false
-
-    ; If no scripts have executed in this pass how long should we sleep before checking again
-    ; Impact:
-    ; Too low and you will waste lots of CPU
-    ; Too high and people touching object or similar will have to wait up to this amount of time before script responding
-    SleepTimeIfNoScriptExecutionMs=50
-
-    ; AppDomains are used for two things:
-    ; * Security: Scripts inside AppDomains are limited in permissions.
-    ; * Script unloading: When a script is deactivated it can not be unloaded. Only whole AppDomains can be unloaded.
-    ;                     AppDomains are therefore only unloaded once ALL active scripts inside it has been deactivated (removed from prims).
-    ; Each AppDomain has some memory overhead. But leaving dead scripts in memory also has memory overhead.
-    ScriptsPerAppDomain=1
-
-    ; MaintenanceLoop
-    ; How often to run maintenance loop
-    ; Maintenance loop is doing: script compile/load, script unload, reload config, adjust running config and enforce max execution time
-    MaintenanceLoopms=50
-
-    ; How many maintenanceloops between each of these.
-    ; (if 2 then function will be executed every MaintenanceLoopms*2 ms)
-    ; Script loading/unloading
-
-    ; How long load/unload thread should sleep if there is nothing to do
-    ; Higher value makes it respond slower when scripts are added/removed from prims
-    ; But once active it will process all in queue before sleeping again
-    MaintenanceLoopTicks_ScriptLoadUnload=1
-
-    ; Other tasks
-    ; check if we need to reload config, adjust running config and enforce max execution time
-    MaintenanceLoopTicks_Other=10
-
-    ; Allow the use of os* functions (some are dangerous)
-    ; Default is false
-    AllowOSFunctions = false
-
-    ; Threat level to allow if os functions are enabled
-    ; One of None, VeryLow, Low, Moderate, High, VeryHigh, Severe
-    ; Default is VeryLow
-    OSFunctionThreatLevel = VeryLow
-
-    ; Maximum number of items in load/unload queue before we start rejecting loads
-    ; Note that we will only be rejecting load. Unloads will still be able to queue.
-    LoadUnloadMaxQueueSize=100
-
-    ; Maximum number of (LSL) events that can be queued before new events are ignored.
-    EventExecutionMaxQueueSize=300
-
-    ; Async LL command sleep
-    ; If no async LL commands are waiting, how long should thread sleep before checking again
-    ; Async LL commands are LSL-commands that causes an event to be fired back with result
-    ; currently unused
-    ; AsyncLLCommandLoopms=50
-
-    ; When script is converted from LSL to C#, or just plain compiled, a copy of the script source will be put in the ScriptEngine folder
-    WriteScriptSourceToDebugFile=false
-
-    ; Specify default script compiler
-    ; If you do not specify //cs, //vb, //js or //lsl tag as the first characters of your script then the default compiler will be chosen
-    ; Valid languages are: lsl, cs, js and vb
-    DefaultCompileLanguage=lsl
-
-    ; Specify what compilers are allowed to be used
-    ; Note vb only works on Windows for now (Mono lacks VB compile support)
-    ; Valid languages are: lsl, cs, js and vb
-    ; AllowedCompilers=lsl,cs,js,vb.  *warning*, non lsl languages have access to static methods such as System.IO.File.  Enable at your own risk.
-    AllowedCompilers=lsl
-
-    ; Compile scripts with debugging
-    ; Probably a thousand times slower, but gives you a line number when something goes wrong.
-    CompileWithDebugInformation=true
-
-    ; Remove old scripts on next startup
-    ; currently unused
-    ;CleanUpOldScriptsOnStartup=true
diff --git a/bin/config.preview.donotuseyet/region/scripting/engines/mrm.ini.example b/bin/config.preview.donotuseyet/region/scripting/engines/mrm.ini.example
deleted file mode 100644
index 0c194ae..0000000
--- a/bin/config.preview.donotuseyet/region/scripting/engines/mrm.ini.example
+++ /dev/null
@@ -1,12 +0,0 @@
-; This file shows initialization defaults for OpenSimulator.  If you want to override these
-; please copy/rename this file from .ini.example file to .ini.  For example
-;
-; chat.ini.example => chat.ini
-;
-; or you can copy and paste the settings from this file directly to bin/OpenSim.ini
-;
-
-[MRM]
-    ; Enables the Mini Region Modules Script Engine. WARNING: SECURITY RISK.
-    ; default is false
-          Enabled = false 
diff --git a/bin/config.preview.donotuseyet/region/scripting/engines/xengine.ini.example b/bin/config.preview.donotuseyet/region/scripting/engines/xengine.ini.example
deleted file mode 100644
index b65e422..0000000
--- a/bin/config.preview.donotuseyet/region/scripting/engines/xengine.ini.example
+++ /dev/null
@@ -1,88 +0,0 @@
-; This file shows initialization defaults for OpenSimulator.  If you want to override these
-; please copy/rename this file from .ini.example file to .ini.  For example
-;
-; chat.ini.example => chat.ini
-;
-; or you can copy and paste the settings from this file directly to bin/OpenSim.ini
-;
-
-[XEngine]
-    ; Enable this engine in this OpenSim instance
-    Enabled = true
-
-    ; How many threads to keep alive even if nothing is happening
-    MinThreads = 2
-
-    ; How many threads to start at maximum load
-    MaxThreads = 100
-
-    ; Time a thread must be idle (in seconds) before it dies
-    IdleTimeout = 60
-
-    ; Thread priority ("Lowest", "BelowNormal", "Normal", "AboveNormal", "Highest")
-    Priority = "BelowNormal"
-
-    ; Maximum number of events to queue for a script (excluding timers)
-    MaxScriptEventQueue = 300
-
-    ; Stack size per thread created
-    ThreadStackSize = 262144
-
-    ; Rate to poll for asynchronous command replies (ms)
-    ; currently unused
-    ;AsyncLLCommandLoopms = 50
-
-    ; Save the source of all compiled scripts
-    WriteScriptSourceToDebugFile = false
-
-    ; Default language for scripts
-    DefaultCompileLanguage = lsl
-
-    ; List of allowed languages (lsl,vb,js,cs)
-    ; AllowedCompilers=lsl,cs,js,vb.  
-    ; *warning*, non lsl languages have access to static methods such as System.IO.File.  Enable at your own risk.
-    AllowedCompilers=lsl
-
-    ; Compile debug info (line numbers) into the script assemblies
-    CompileWithDebugInformation = true
-
-    ; Allow the use of os* functions (some are dangerous)
-    AllowOSFunctions = false
-
-    ; Threat level to allow, one of None, VeryLow, Low, Moderate, High, VeryHigh, Severe
-    OSFunctionThreatLevel = VeryLow
-
-    ; Interval (s) between background save of script states
-    SaveInterval = 120
-
-    ; Interval (s) between maintenance runs (0 = disable)
-    MaintenanceInterval = 10
-
-    ; Time a script can spend in an event handler before it is interrupted
-    EventLimit = 30
-
-    ; If a script overruns it's event limit, kill the script?
-    KillTimedOutScripts = false
-
-    ; Sets the multiplier for the scripting delays
-    ScriptDelayFactor = 1.0
-
-    ; The factor the 10 m distances llimits are multiplied by
-    ScriptDistanceLimitFactor = 1.0
-
-    ; OS Functions enable/disable
-    ; For each function, you can add one line, as shown
-    ; The default for all functions allows them if below threat level
-
-    ; true allows the use of the function unconditionally
-    ; Allow_osSetRegionWaterHeight = true
-
-    ; false disables the function completely
-    ; Allow_osSetRegionWaterHeight = false
-
-    ; Comma separated list of UUIDS allows the function for that list of UUIDS
-    ; Allow_osSetRegionWaterHeight = 888760cb-a3cf-43ac-8ea4-8732fd3ee2bb
-
-    ; Allow for llCreateLink and llBreakLink to work without asking for permission 
-    ; only enable this in a trusted environment otherwise you may be subject to hijacking
-    ; AutomaticLinkPermission = false
diff --git a/bin/config.preview.donotuseyet/region/scripting/ll-functions.ini.example b/bin/config.preview.donotuseyet/region/scripting/ll-functions.ini.example
deleted file mode 100644
index e7ab7a9..0000000
--- a/bin/config.preview.donotuseyet/region/scripting/ll-functions.ini.example
+++ /dev/null
@@ -1,18 +0,0 @@
-; This file shows initialization defaults for OpenSimulator.  If you want to override these
-; please copy/rename this file from .ini.example file to .ini.  For example
-;
-; chat.ini.example => chat.ini
-;
-; or you can copy and paste the settings from this file directly to bin/OpenSim.ini
-;
-
-[LL-Functions]
-    ; Set the following to true to allow administrator owned scripts to execute console commands
-    ; currently unused
-    ; AllowosConsoleCommand=false
-
-    AllowGodFunctions = false
-
-    ; Maximum number of llListen events we allow per script
-    ; Set this to 0 to have no limit imposed.
-    max_listens_per_script = 64
diff --git a/bin/config.preview.donotuseyet/region/scripting/regionready.ini.example b/bin/config.preview.donotuseyet/region/scripting/regionready.ini.example
deleted file mode 100644
index e64139e..0000000
--- a/bin/config.preview.donotuseyet/region/scripting/regionready.ini.example
+++ /dev/null
@@ -1,20 +0,0 @@
-; This file shows initialization defaults for OpenSimulator.  If you want to override these
-; please copy/rename this file from .ini.example file to .ini.  For example
-;
-; chat.ini.example => chat.ini
-;
-; or you can copy and paste the settings from this file directly to bin/OpenSim.ini
-;
-
-[RegionReady]
-    ; Enable this module to get notified once all items and scripts in the region have been completely loaded and compiled
-    ; default is false
-    enabled = false
-
-    ; Channel on which to signal region readiness through a message
-    ; formatted as follows: "{server_startup|oar_file_load},{0|1},n,[oar error]"
-    ; - the first field indicating whether this is an initial server startup 
-    ; - the second field is a number indicating whether the OAR file loaded ok (1 == ok, 0 == error)
-    ; - the third field is a number indicating how many scripts failed to compile
-    ; - "oar error" if supplied, provides the error message from the OAR load
-    channel_notify = -800
diff --git a/bin/config.preview.donotuseyet/region/scripting/smtp.ini.example b/bin/config.preview.donotuseyet/region/scripting/smtp.ini.example
deleted file mode 100644
index 5b423ab..0000000
--- a/bin/config.preview.donotuseyet/region/scripting/smtp.ini.example
+++ /dev/null
@@ -1,19 +0,0 @@
-; This file shows initialization defaults for OpenSimulator.  If you want to override these
-; please copy/rename this file from .ini.example file to .ini.  For example
-;
-; chat.ini.example => chat.ini
-;
-; or you can copy and paste the settings from this file directly to bin/OpenSim.ini
-;
-
-[SMTP]
-
-    enabled=false
-
-    ;enabled=true
-    ;internal_object_host=lsl.opensim.local
-    ;host_domain_header_from=127.0.0.1
-    ;SMTP_SERVER_HOSTNAME=127.0.0.1
-    ;SMTP_SERVER_PORT=25
-    ;SMTP_SERVER_LOGIN=foo
-    ;SMTP_SERVER_PASSWORD=bar