From c220b4b8b404b820554f6541b7f9b9e454f57698 Mon Sep 17 00:00:00 2001 From: Justin Clarke Casey Date: Mon, 10 Nov 2008 19:32:18 +0000 Subject: * minor: Remove old dead and buried datastore code --- .../OpenSim.DataStore.DB4o/DB4oDataStore.cs | 132 --- .../Properties/AssemblyInfo.cs | 62 -- .../OpenSim.DataStore.MSSQL/MSSQLDataStore.cs | 1094 -------------------- 3 files changed, 1288 deletions(-) delete mode 100644 OpenSim/Region/Storage/OpenSim.DataStore.DB4o/DB4oDataStore.cs delete mode 100644 OpenSim/Region/Storage/OpenSim.DataStore.DB4o/Properties/AssemblyInfo.cs delete mode 100644 OpenSim/Region/Storage/OpenSim.DataStore.MSSQL/MSSQLDataStore.cs (limited to 'OpenSim/Region') diff --git a/OpenSim/Region/Storage/OpenSim.DataStore.DB4o/DB4oDataStore.cs b/OpenSim/Region/Storage/OpenSim.DataStore.DB4o/DB4oDataStore.cs deleted file mode 100644 index 5380e7b..0000000 --- a/OpenSim/Region/Storage/OpenSim.DataStore.DB4o/DB4oDataStore.cs +++ /dev/null @@ -1,132 +0,0 @@ -/* - * Copyright (c) Contributors, http://opensimulator.org/ - * See CONTRIBUTORS.TXT for a full list of copyright holders. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of the OpenSim Project nor the - * names of its contributors may be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY - * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -using System; -using System.Collections.Generic; -using System.Text; - -using OpenSim.Region.Environment.Scenes; -using OpenSim.Region.Environment.LandManagement; -using OpenSim.Region.Environment; -using OpenSim.Region.Interfaces; -using OpenSim.Framework.Console; -using libsecondlife; - -using Db4objects.Db4o; -using Db4objects.Db4o.Query; - -namespace OpenSim.DataStore.DB4oStorage -{ - public class SceneObjectQuery : Predicate - { - private static readonly log4net.ILog m_log = log4net.LogManager.GetLogger(System.Reflection.MethodBase.GetCurrentMethod().DeclaringType); - - private LLUUID globalIDSearch; - - public SceneObjectQuery(LLUUID find) - { - globalIDSearch = find; - } - - public bool Match(SceneObjectGroup obj) - { - return obj.UUID == globalIDSearch; - } - } - - public class DB4oDataStore : IRegionDataStore - { - private IObjectContainer db; - - public void Initialise(string dbfile, string dbname) - { - m_log.Info("[DATASTORE]: DB4O - Opening " + dbfile); - db = Db4oFactory.OpenFile(dbfile); - } - - public void StoreObject(SceneObjectGroup obj, LLUUID regionUUID) - { - db.Set(obj); - } - - public void RemoveObject(LLUUID obj, LLUUID regionUUID) - { - IObjectSet result = db.Query(new SceneObjectQuery(obj)); - if (result.Count > 0) - { - SceneObjectGroup item = (SceneObjectGroup)result.Next(); - db.Delete(item); - } - } - - public List LoadObjects(LLUUID regionUUID) - { - IObjectSet result = db.Get(typeof(SceneObjectGroup)); - List retvals = new List(); - - m_log.Info("[DATASTORE]: DB4O - LoadObjects found " + result.Count.ToString() + " objects"); - - foreach (Object obj in result) - { - retvals.Add((SceneObjectGroup)obj); - } - - return retvals; - } - - public void StoreTerrain(double[,] ter) - { - } - - public double[,] LoadTerrain() - { - return null; - } - - public void RemoveLandObject(uint id) - { - } - - public void StoreParcel(Land parcel) - { - } - - public List LoadLandObjects() - { - return new List(); - } - - public void Shutdown() - { - if (db != null) - { - db.Commit(); - db.Close(); - } - } - } -} diff --git a/OpenSim/Region/Storage/OpenSim.DataStore.DB4o/Properties/AssemblyInfo.cs b/OpenSim/Region/Storage/OpenSim.DataStore.DB4o/Properties/AssemblyInfo.cs deleted file mode 100644 index 0416779..0000000 --- a/OpenSim/Region/Storage/OpenSim.DataStore.DB4o/Properties/AssemblyInfo.cs +++ /dev/null @@ -1,62 +0,0 @@ -/* - * Copyright (c) Contributors, http://opensimulator.org/ - * See CONTRIBUTORS.TXT for a full list of copyright holders. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of the OpenSim Project nor the - * names of its contributors may be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY - * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -using System.Reflection; -using System.Runtime.CompilerServices; -using System.Runtime.InteropServices; - -// General information about an assembly is controlled through the following -// set of attributes. Change these attribute values to modify the information -// associated with an assembly. -[assembly: AssemblyTitle("OpenSim.DataStore.DB4o")] -[assembly: AssemblyDescription("")] -[assembly: AssemblyConfiguration("")] -[assembly: AssemblyCompany("")] -[assembly: AssemblyProduct("OpenSim.DataStore.DB4o")] -[assembly: AssemblyCopyright("Copyright (c) 2007")] -[assembly: AssemblyTrademark("")] -[assembly: AssemblyCulture("")] - -// Setting ComVisible to false makes the types in this assembly not visible -// to COM components. If you need to access a type in this assembly from -// COM, set the ComVisible attribute to true on that type. -[assembly: ComVisible(false)] - -// The following GUID is for the ID of the typelib if this project is exposed to COM -[assembly: Guid("7a12de8b-fdd1-48f5-89a9-8dc2dafbeebc")] - -// Version information for an assembly consists of the following four values: -// -// Major Version -// Minor Version -// Build Number -// Revision -// -// You can specify all the values or you can default the Revision and Build Numbers -// by using the '*' as shown below: -[assembly: AssemblyVersion("1.0.0.0")] -[assembly: AssemblyFileVersion("1.0.0.0")] diff --git a/OpenSim/Region/Storage/OpenSim.DataStore.MSSQL/MSSQLDataStore.cs b/OpenSim/Region/Storage/OpenSim.DataStore.MSSQL/MSSQLDataStore.cs deleted file mode 100644 index edbb1b7..0000000 --- a/OpenSim/Region/Storage/OpenSim.DataStore.MSSQL/MSSQLDataStore.cs +++ /dev/null @@ -1,1094 +0,0 @@ -/* - * Copyright (c) Contributors, http://opensimulator.org/ - * See CONTRIBUTORS.TXT for a full list of copyright holders. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of the OpenSim Project nor the - * names of its contributors may be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY - * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -using System; -using System.Collections.Generic; -using System.Data; -using System.Data.SqlClient; -using System.IO; -using System.Reflection; -using libsecondlife; -using log4net; -using OpenSim.Data; -using OpenSim.Framework; -using OpenSim.Region.Environment.Interfaces; -using OpenSim.Region.Environment.Scenes; - -namespace OpenSim.DataStore.MSSQL -{ - public class MSSQLDataStore : IRegionDataStore - { - private static readonly ILog m_log = LogManager.GetLogger(MethodBase.GetCurrentMethod().DeclaringType); - - private const string primSelect = "select * from prims"; - private const string shapeSelect = "select * from primshapes"; - private const string terrainSelect = "select * from terrain"; - - private DataSet ds; - private SqlDataAdapter primDa; - private SqlDataAdapter shapeDa; - private SqlDataAdapter terrainDa; - - // see IRegionDataStore - public void Initialise(string dbfile, bool persistPrimInventories) - { - IniFile GridDataMySqlFile = new IniFile("mssql_connection.ini"); - string settingDataSource = GridDataMySqlFile.ParseFileReadValue("data_source"); - string settingInitialCatalog = GridDataMySqlFile.ParseFileReadValue("initial_catalog"); - string settingPersistSecurityInfo = GridDataMySqlFile.ParseFileReadValue("persist_security_info"); - string settingUserId = GridDataMySqlFile.ParseFileReadValue("user_id"); - string settingPassword = GridDataMySqlFile.ParseFileReadValue("password"); - - string connectionString = "Data Source=" + settingDataSource + ";Initial Catalog=" + settingInitialCatalog + - ";Persist Security Info=" + settingPersistSecurityInfo + ";User ID=" + - settingUserId + ";Password=" + settingPassword + ";"; - - ds = new DataSet(); - - m_log.Info("[DATASTORE]: MSSQL - connecting: " + settingInitialCatalog); - SqlConnection conn = new SqlConnection(connectionString); - SqlCommand primSelectCmd = new SqlCommand(primSelect, conn); - primDa = new SqlDataAdapter(primSelectCmd); - // SqlCommandBuilder primCb = new SqlCommandBuilder(primDa); - - SqlCommand shapeSelectCmd = new SqlCommand(shapeSelect, conn); - shapeDa = new SqlDataAdapter(shapeSelectCmd); - // SqlCommandBuilder shapeCb = new SqlCommandBuilder(shapeDa); - - SqlCommand terrainSelectCmd = new SqlCommand(terrainSelect, conn); - terrainDa = new SqlDataAdapter(terrainSelectCmd); - - - // We fill the data set, now we've got copies in memory for the information - // TODO: see if the linkage actually holds. - // primDa.FillSchema(ds, SchemaType.Source, "PrimSchema"); - TestTables(conn); - - lock (ds) - { - ds.Tables.Add(createPrimTable()); - setupPrimCommands(primDa, conn); - primDa.Fill(ds.Tables["prims"]); - - ds.Tables.Add(createShapeTable()); - setupShapeCommands(shapeDa, conn); - - ds.Tables.Add(createTerrainTable()); - setupTerrainCommands(terrainDa, conn); - - // WORKAROUND: This is a work around for Sql on - // windows, which gets really unhappy with blob columns - // that have no sample data in them. At some point we - // need to actually find a proper way to handle this. - try - { - shapeDa.Fill(ds.Tables["primshapes"]); - } - catch (Exception) - { - m_log.Info("[DATASTORE]: Caught fill error on primshapes table"); - } - try - { - terrainDa.Fill(ds.Tables["terrain"]); - } - catch (Exception) - { - m_log.Info("[DATASTORE]: Caught fill error on terrain table"); - } - return; - } - } - - public void StoreRegionSettings(RegionSettings rs) - { - } - - public RegionSettings LoadRegionSettings(LLUUID regionUUID) - { - return null; - } - - public void StoreObject(SceneObjectGroup obj, LLUUID regionUUID) - { - lock (ds) - { - foreach (SceneObjectPart prim in obj.Children.Values) - { - //m_log.Info("[DATASTORE]: Adding obj: " + obj.UUID + " to region: " + regionUUID); - addPrim(prim, obj.UUID, regionUUID); - } - } - - Commit(); - // m_log.Info("Dump of prims:", ds.GetXml()); - } - - public void RemoveObject(LLUUID obj, LLUUID regionUUID) - { - m_log.InfoFormat("[DATASTORE]: Removing obj: {0} from region: {1}", obj.UUID, regionUUID); - - DataTable prims = ds.Tables["prims"]; - DataTable shapes = ds.Tables["primshapes"]; - - string selectExp = "SceneGroupID = '" + obj.ToString() + "'"; - lock (ds) - { - DataRow[] primRows = prims.Select(selectExp); - foreach (DataRow row in primRows) - { - LLUUID uuid = new LLUUID((string) row["UUID"]); - DataRow shapeRow = shapes.Rows.Find(uuid); - if (shapeRow != null) - { - shapeRow.Delete(); - } - row.Delete(); - } - } - - Commit(); - } - - public List LoadObjects(LLUUID regionUUID) - { - Dictionary createdObjects = new Dictionary(); - - List retvals = new List(); - - DataTable prims = ds.Tables["prims"]; - DataTable shapes = ds.Tables["primshapes"]; - - string byRegion = "RegionUUID = '" + regionUUID.ToString() + "'"; - string orderByParent = "ParentID ASC"; - - lock (ds) - { - DataRow[] primsForRegion = prims.Select(byRegion, orderByParent); - m_log.Info("[DATASTORE]: " + - "Loaded " + primsForRegion.Length + " prims for region: " + regionUUID); - - foreach (DataRow primRow in primsForRegion) - { - try - { - string uuid = (string) primRow["UUID"]; - string objID = (string) primRow["SceneGroupID"]; - if (uuid == objID) //is new SceneObjectGroup ? - { - SceneObjectGroup group = new SceneObjectGroup(); - SceneObjectPart prim = buildPrim(primRow); - DataRow shapeRow = shapes.Rows.Find(prim.UUID); - if (shapeRow != null) - { - prim.Shape = buildShape(shapeRow); - } - else - { - m_log.Info( - "No shape found for prim in storage, so setting default box shape"); - prim.Shape = PrimitiveBaseShape.Default; - } - group.AddPart(prim); - group.RootPart = prim; - - createdObjects.Add(group.UUID, group); - retvals.Add(group); - } - else - { - SceneObjectPart prim = buildPrim(primRow); - DataRow shapeRow = shapes.Rows.Find(prim.UUID); - if (shapeRow != null) - { - prim.Shape = buildShape(shapeRow); - } - else - { - m_log.Info( - "No shape found for prim in storage, so setting default box shape"); - prim.Shape = PrimitiveBaseShape.Default; - } - createdObjects[new LLUUID(objID)].AddPart(prim); - } - } - catch (Exception e) - { - m_log.Error("[DATASTORE]: Failed create prim object, exception and data follows"); - m_log.Info("[DATASTORE]: " + e.ToString()); - foreach (DataColumn col in prims.Columns) - { - m_log.Info("[DATASTORE]: Col: " + col.ColumnName + " => " + primRow[col]); - } - } - } - } - return retvals; - } - - - public void StoreTerrain(double[,] ter, LLUUID regionID) - { - int revision = Util.UnixTimeSinceEpoch(); - - m_log.Info("[DATASTORE]: Storing terrain revision r" + revision.ToString()); - - DataTable terrain = ds.Tables["terrain"]; - lock (ds) - { - DataRow newrow = terrain.NewRow(); - fillTerrainRow(newrow, regionID, revision, ter); - terrain.Rows.Add(newrow); - - Commit(); - } - } - - public double[,] LoadTerrain(LLUUID regionID) - { - double[,] terret = new double[256,256]; - terret.Initialize(); - - DataTable terrain = ds.Tables["terrain"]; - - lock (ds) - { - DataRow[] rows = terrain.Select("RegionUUID = '" + regionID.ToString() + "'", "Revision DESC"); - - int rev = 0; - - if (rows.Length > 0) - { - DataRow row = rows[0]; - - byte[] heightmap = (byte[]) row["Heightfield"]; - for (int x = 0; x < 256; x++) - { - for (int y = 0; y < 256; y++) - { - terret[x, y] = BitConverter.ToDouble(heightmap, ((x*256) + y)*8); - } - } - - rev = (int) row["Revision"]; - } - else - { - m_log.Info("[DATASTORE]: No terrain found for region"); - return null; - } - - - m_log.Info("[DATASTORE]: Loaded terrain revision r" + rev.ToString()); - } - - return terret; - } - - public void RemoveLandObject(LLUUID globalID) - { - } - - public void StoreLandObject(ILandObject parcel) - { - } - - public List LoadLandObjects(LLUUID regionUUID) - { - return new List(); - } - - public void Commit() - { - lock (ds) - { - primDa.Update(ds, "prims"); - shapeDa.Update(ds, "primshapes"); - terrainDa.Update(ds, "terrain"); - ds.AcceptChanges(); - } - } - - public void Shutdown() - { - Commit(); - } - - /*********************************************************************** - * - * Database Definition Functions - * - * This should be db agnostic as we define them in ADO.NET terms - * - **********************************************************************/ - - private static void createCol(DataTable dt, string name, Type type) - { - DataColumn col = new DataColumn(name, type); - dt.Columns.Add(col); - } - - private static DataTable createTerrainTable() - { - DataTable terrain = new DataTable("terrain"); - - createCol(terrain, "RegionUUID", typeof (String)); - createCol(terrain, "Revision", typeof (Int32)); - createCol(terrain, "Heightfield", typeof (Byte[])); - - return terrain; - } - - private static DataTable createPrimTable() - { - DataTable prims = new DataTable("prims"); - - createCol(prims, "UUID", typeof (String)); - createCol(prims, "RegionUUID", typeof (String)); - createCol(prims, "ParentID", typeof (Int32)); - createCol(prims, "CreationDate", typeof (Int32)); - createCol(prims, "Name", typeof (String)); - createCol(prims, "SceneGroupID", typeof (String)); - // various text fields - createCol(prims, "Text", typeof (String)); - createCol(prims, "Description", typeof (String)); - createCol(prims, "SitName", typeof (String)); - createCol(prims, "TouchName", typeof (String)); - // permissions - createCol(prims, "ObjectFlags", typeof (Int32)); - createCol(prims, "CreatorID", typeof (String)); - createCol(prims, "OwnerID", typeof (String)); - createCol(prims, "GroupID", typeof (String)); - createCol(prims, "LastOwnerID", typeof (String)); - createCol(prims, "OwnerMask", typeof (Int32)); - createCol(prims, "NextOwnerMask", typeof (Int32)); - createCol(prims, "GroupMask", typeof (Int32)); - createCol(prims, "EveryoneMask", typeof (Int32)); - createCol(prims, "BaseMask", typeof (Int32)); - // vectors - createCol(prims, "PositionX", typeof (Double)); - createCol(prims, "PositionY", typeof (Double)); - createCol(prims, "PositionZ", typeof (Double)); - createCol(prims, "GroupPositionX", typeof (Double)); - createCol(prims, "GroupPositionY", typeof (Double)); - createCol(prims, "GroupPositionZ", typeof (Double)); - createCol(prims, "VelocityX", typeof (Double)); - createCol(prims, "VelocityY", typeof (Double)); - createCol(prims, "VelocityZ", typeof (Double)); - createCol(prims, "AngularVelocityX", typeof (Double)); - createCol(prims, "AngularVelocityY", typeof (Double)); - createCol(prims, "AngularVelocityZ", typeof (Double)); - createCol(prims, "AccelerationX", typeof (Double)); - createCol(prims, "AccelerationY", typeof (Double)); - createCol(prims, "AccelerationZ", typeof (Double)); - // quaternions - createCol(prims, "RotationX", typeof (Double)); - createCol(prims, "RotationY", typeof (Double)); - createCol(prims, "RotationZ", typeof (Double)); - createCol(prims, "RotationW", typeof (Double)); - - // sit target - createCol(prims, "SitTargetOffsetX", typeof (Double)); - createCol(prims, "SitTargetOffsetY", typeof (Double)); - createCol(prims, "SitTargetOffsetZ", typeof (Double)); - - createCol(prims, "SitTargetOrientW", typeof (Double)); - createCol(prims, "SitTargetOrientX", typeof (Double)); - createCol(prims, "SitTargetOrientY", typeof (Double)); - createCol(prims, "SitTargetOrientZ", typeof (Double)); - - // Add in contraints - prims.PrimaryKey = new DataColumn[] {prims.Columns["UUID"]}; - - return prims; - } - - private static DataTable createShapeTable() - { - DataTable shapes = new DataTable("primshapes"); - createCol(shapes, "UUID", typeof (String)); - // shape is an enum - createCol(shapes, "Shape", typeof (Int32)); - // vectors - createCol(shapes, "ScaleX", typeof (Double)); - createCol(shapes, "ScaleY", typeof (Double)); - createCol(shapes, "ScaleZ", typeof (Double)); - // paths - createCol(shapes, "PCode", typeof (Int32)); - createCol(shapes, "PathBegin", typeof (Int32)); - createCol(shapes, "PathEnd", typeof (Int32)); - createCol(shapes, "PathScaleX", typeof (Int32)); - createCol(shapes, "PathScaleY", typeof (Int32)); - createCol(shapes, "PathShearX", typeof (Int32)); - createCol(shapes, "PathShearY", typeof (Int32)); - createCol(shapes, "PathSkew", typeof (Int32)); - createCol(shapes, "PathCurve", typeof (Int32)); - createCol(shapes, "PathRadiusOffset", typeof (Int32)); - createCol(shapes, "PathRevolutions", typeof (Int32)); - createCol(shapes, "PathTaperX", typeof (Int32)); - createCol(shapes, "PathTaperY", typeof (Int32)); - createCol(shapes, "PathTwist", typeof (Int32)); - createCol(shapes, "PathTwistBegin", typeof (Int32)); - // profile - createCol(shapes, "ProfileBegin", typeof (Int32)); - createCol(shapes, "ProfileEnd", typeof (Int32)); - createCol(shapes, "ProfileCurve", typeof (Int32)); - createCol(shapes, "ProfileHollow", typeof (Int32)); - // text TODO: this isn't right, but I'm not sure the right - // way to specify this as a blob atm - createCol(shapes, "Texture", typeof (Byte[])); - createCol(shapes, "ExtraParams", typeof (Byte[])); - - shapes.PrimaryKey = new DataColumn[] {shapes.Columns["UUID"]}; - - return shapes; - } - - /*********************************************************************** - * - * Convert between ADO.NET <=> OpenSim Objects - * - * These should be database independant - * - **********************************************************************/ - - private static SceneObjectPart buildPrim(DataRow row) - { - // TODO: this doesn't work yet because something more - // interesting has to be done to actually get these values - // back out. Not enough time to figure it out yet. - SceneObjectPart prim = new SceneObjectPart(); - prim.UUID = new LLUUID((String) row["UUID"]); - // explicit conversion of integers is required, which sort - // of sucks. No idea if there is a shortcut here or not. - prim.ParentID = Convert.ToUInt32(row["ParentID"]); - prim.CreationDate = Convert.ToInt32(row["CreationDate"]); - prim.Name = (String) row["Name"]; - // various text fields - prim.Text = (String) row["Text"]; - prim.Description = (String) row["Description"]; - prim.SitName = (String) row["SitName"]; - prim.TouchName = (String) row["TouchName"]; - // permissions - prim.ObjectFlags = Convert.ToUInt32(row["ObjectFlags"]); - prim.CreatorID = new LLUUID((String) row["CreatorID"]); - prim.OwnerID = new LLUUID((String) row["OwnerID"]); - prim.GroupID = new LLUUID((String) row["GroupID"]); - prim.LastOwnerID = new LLUUID((String) row["LastOwnerID"]); - prim.OwnerMask = Convert.ToUInt32(row["OwnerMask"]); - prim.NextOwnerMask = Convert.ToUInt32(row["NextOwnerMask"]); - prim.GroupMask = Convert.ToUInt32(row["GroupMask"]); - prim.EveryoneMask = Convert.ToUInt32(row["EveryoneMask"]); - prim.BaseMask = Convert.ToUInt32(row["BaseMask"]); - // vectors - prim.OffsetPosition = new LLVector3( - Convert.ToSingle(row["PositionX"]), - Convert.ToSingle(row["PositionY"]), - Convert.ToSingle(row["PositionZ"]) - ); - prim.GroupPosition = new LLVector3( - Convert.ToSingle(row["GroupPositionX"]), - Convert.ToSingle(row["GroupPositionY"]), - Convert.ToSingle(row["GroupPositionZ"]) - ); - prim.Velocity = new LLVector3( - Convert.ToSingle(row["VelocityX"]), - Convert.ToSingle(row["VelocityY"]), - Convert.ToSingle(row["VelocityZ"]) - ); - prim.AngularVelocity = new LLVector3( - Convert.ToSingle(row["AngularVelocityX"]), - Convert.ToSingle(row["AngularVelocityY"]), - Convert.ToSingle(row["AngularVelocityZ"]) - ); - prim.Acceleration = new LLVector3( - Convert.ToSingle(row["AccelerationX"]), - Convert.ToSingle(row["AccelerationY"]), - Convert.ToSingle(row["AccelerationZ"]) - ); - // quaternions - prim.RotationOffset = new LLQuaternion( - Convert.ToSingle(row["RotationX"]), - Convert.ToSingle(row["RotationY"]), - Convert.ToSingle(row["RotationZ"]), - Convert.ToSingle(row["RotationW"]) - ); - - try - { - prim.SitTargetPositionLL = new LLVector3( - Convert.ToSingle(row["SitTargetOffsetX"]), - Convert.ToSingle(row["SitTargetOffsetY"]), - Convert.ToSingle(row["SitTargetOffsetZ"])); - prim.SitTargetOrientationLL = new LLQuaternion( - Convert.ToSingle( - row["SitTargetOrientX"]), - Convert.ToSingle( - row["SitTargetOrientY"]), - Convert.ToSingle( - row["SitTargetOrientZ"]), - Convert.ToSingle( - row["SitTargetOrientW"])); - } - catch (InvalidCastException) - { - // Database table was created before we got here and now has null values :P - } - - return prim; - } - - - private static void fillPrimRow(DataRow row, SceneObjectPart prim, LLUUID sceneGroupID, LLUUID regionUUID) - { - row["UUID"] = prim.UUID; - row["RegionUUID"] = regionUUID; - row["ParentID"] = prim.ParentID; - row["CreationDate"] = prim.CreationDate; - row["Name"] = prim.Name; - row["SceneGroupID"] = sceneGroupID; // the UUID of the root part for this SceneObjectGroup - // various text fields - row["Text"] = prim.Text; - row["Description"] = prim.Description; - row["SitName"] = prim.SitName; - row["TouchName"] = prim.TouchName; - // permissions - row["ObjectFlags"] = prim.ObjectFlags; - row["CreatorID"] = prim.CreatorID; - row["OwnerID"] = prim.OwnerID; - row["GroupID"] = prim.GroupID; - row["LastOwnerID"] = prim.LastOwnerID; - row["OwnerMask"] = prim.OwnerMask; - row["NextOwnerMask"] = prim.NextOwnerMask; - row["GroupMask"] = prim.GroupMask; - row["EveryoneMask"] = prim.EveryoneMask; - row["BaseMask"] = prim.BaseMask; - // vectors - row["PositionX"] = prim.OffsetPosition.X; - row["PositionY"] = prim.OffsetPosition.Y; - row["PositionZ"] = prim.OffsetPosition.Z; - row["GroupPositionX"] = prim.GroupPosition.X; - row["GroupPositionY"] = prim.GroupPosition.Y; - row["GroupPositionZ"] = prim.GroupPosition.Z; - row["VelocityX"] = prim.Velocity.X; - row["VelocityY"] = prim.Velocity.Y; - row["VelocityZ"] = prim.Velocity.Z; - row["AngularVelocityX"] = prim.AngularVelocity.X; - row["AngularVelocityY"] = prim.AngularVelocity.Y; - row["AngularVelocityZ"] = prim.AngularVelocity.Z; - row["AccelerationX"] = prim.Acceleration.X; - row["AccelerationY"] = prim.Acceleration.Y; - row["AccelerationZ"] = prim.Acceleration.Z; - // quaternions - row["RotationX"] = prim.RotationOffset.X; - row["RotationY"] = prim.RotationOffset.Y; - row["RotationZ"] = prim.RotationOffset.Z; - row["RotationW"] = prim.RotationOffset.W; - - try - { - // Sit target - LLVector3 sitTargetPos = prim.SitTargetPositionLL; - row["SitTargetOffsetX"] = sitTargetPos.X; - row["SitTargetOffsetY"] = sitTargetPos.Y; - row["SitTargetOffsetZ"] = sitTargetPos.Z; - - LLQuaternion sitTargetOrient = prim.SitTargetOrientationLL; - row["SitTargetOrientW"] = sitTargetOrient.W; - row["SitTargetOrientX"] = sitTargetOrient.X; - row["SitTargetOrientY"] = sitTargetOrient.Y; - row["SitTargetOrientZ"] = sitTargetOrient.Z; - } - catch (Exception) - { - // TODO: Add Sit Target Rows! - } - } - - private static PrimitiveBaseShape buildShape(DataRow row) - { - PrimitiveBaseShape s = new PrimitiveBaseShape(); - s.Scale = new LLVector3( - Convert.ToSingle(row["ScaleX"]), - Convert.ToSingle(row["ScaleY"]), - Convert.ToSingle(row["ScaleZ"]) - ); - // paths - s.PCode = Convert.ToByte(row["PCode"]); - s.PathBegin = Convert.ToUInt16(row["PathBegin"]); - s.PathEnd = Convert.ToUInt16(row["PathEnd"]); - s.PathScaleX = Convert.ToByte(row["PathScaleX"]); - s.PathScaleY = Convert.ToByte(row["PathScaleY"]); - s.PathShearX = Convert.ToByte(row["PathShearX"]); - s.PathShearY = Convert.ToByte(row["PathShearY"]); - s.PathSkew = Convert.ToSByte(row["PathSkew"]); - s.PathCurve = Convert.ToByte(row["PathCurve"]); - s.PathRadiusOffset = Convert.ToSByte(row["PathRadiusOffset"]); - s.PathRevolutions = Convert.ToByte(row["PathRevolutions"]); - s.PathTaperX = Convert.ToSByte(row["PathTaperX"]); - s.PathTaperY = Convert.ToSByte(row["PathTaperY"]); - s.PathTwist = Convert.ToSByte(row["PathTwist"]); - s.PathTwistBegin = Convert.ToSByte(row["PathTwistBegin"]); - // profile - s.ProfileBegin = Convert.ToUInt16(row["ProfileBegin"]); - s.ProfileEnd = Convert.ToUInt16(row["ProfileEnd"]); - s.ProfileCurve = Convert.ToByte(row["ProfileCurve"]); - s.ProfileHollow = Convert.ToUInt16(row["ProfileHollow"]); - - // text TODO: this isn't right] = but I'm not sure the right - // way to specify this as a blob atm - byte[] textureEntry = (byte[]) row["Texture"]; - s.TextureEntry = textureEntry; - - - s.ExtraParams = (byte[]) row["ExtraParams"]; - - return s; - } - - private static void fillShapeRow(DataRow row, SceneObjectPart prim) - { - PrimitiveBaseShape s = prim.Shape; - row["UUID"] = prim.UUID; - // shape is an enum - row["Shape"] = 0; - // vectors - row["ScaleX"] = s.Scale.X; - row["ScaleY"] = s.Scale.Y; - row["ScaleZ"] = s.Scale.Z; - // paths - row["PCode"] = s.PCode; - row["PathBegin"] = s.PathBegin; - row["PathEnd"] = s.PathEnd; - row["PathScaleX"] = s.PathScaleX; - row["PathScaleY"] = s.PathScaleY; - row["PathShearX"] = s.PathShearX; - row["PathShearY"] = s.PathShearY; - row["PathSkew"] = s.PathSkew; - row["PathCurve"] = s.PathCurve; - row["PathRadiusOffset"] = s.PathRadiusOffset; - row["PathRevolutions"] = s.PathRevolutions; - row["PathTaperX"] = s.PathTaperX; - row["PathTaperY"] = s.PathTaperY; - row["PathTwist"] = s.PathTwist; - row["PathTwistBegin"] = s.PathTwistBegin; - // profile - row["ProfileBegin"] = s.ProfileBegin; - row["ProfileEnd"] = s.ProfileEnd; - row["ProfileCurve"] = s.ProfileCurve; - row["ProfileHollow"] = s.ProfileHollow; - // text TODO: this isn't right] = but I'm not sure the right - // way to specify this as a blob atm - - // And I couldn't work out how to save binary data either - // seems that the texture colum is being treated as a string in the Datarow - // if you do a .getType() on it, it returns string, while the other columns return correct type - // MW[10-08-07] - // Added following xml hack but not really ideal , also ExtraParams isn't currently part of the database - // am a bit worried about adding it now as some people will have old format databases, so for now including that data in this xml data - // MW[17-08-07] - row["Texture"] = s.TextureEntry; - row["ExtraParams"] = s.ExtraParams; - // TextureBlock textureBlock = new TextureBlock(s.TextureEntry); - // textureBlock.ExtraParams = s.ExtraParams; - // System.Text.ASCIIEncoding encoding = new System.Text.ASCIIEncoding(); - // row["Texture"] = encoding.GetBytes(textureBlock.ToXMLString()); - } - - private void addPrim(SceneObjectPart prim, LLUUID sceneGroupID, LLUUID regionUUID) - { - DataTable prims = ds.Tables["prims"]; - DataTable shapes = ds.Tables["primshapes"]; - - DataRow primRow = prims.Rows.Find(prim.UUID); - if (primRow == null) - { - primRow = prims.NewRow(); - fillPrimRow(primRow, prim, sceneGroupID, regionUUID); - prims.Rows.Add(primRow); - } - else - { - fillPrimRow(primRow, prim, sceneGroupID, regionUUID); - } - - DataRow shapeRow = shapes.Rows.Find(prim.UUID); - if (shapeRow == null) - { - shapeRow = shapes.NewRow(); - fillShapeRow(shapeRow, prim); - shapes.Rows.Add(shapeRow); - } - else - { - fillShapeRow(shapeRow, prim); - } - } - - // see IRegionDatastore - public void StorePrimInventory(LLUUID primID, ICollection items) - { - // No implementation yet - } - - /*********************************************************************** - * - * SQL Statement Creation Functions - * - * These functions create SQL statements for update, insert, and create. - * They can probably be factored later to have a db independant - * portion and a db specific portion - * - **********************************************************************/ - - private static SqlCommand createInsertCommand(string table, DataTable dt) - { - /** - * This is subtle enough to deserve some commentary. - * Instead of doing *lots* and *lots of hardcoded strings - * for database definitions we'll use the fact that - * realistically all insert statements look like "insert - * into A(b, c) values(:b, :c) on the parameterized query - * front. If we just have a list of b, c, etc... we can - * generate these strings instead of typing them out. - */ - string[] cols = new string[dt.Columns.Count]; - for (int i = 0; i < dt.Columns.Count; i++) - { - DataColumn col = dt.Columns[i]; - cols[i] = col.ColumnName; - } - - string sql = "insert into " + table + "("; - sql += String.Join(", ", cols); - // important, the first ':' needs to be here, the rest get added in the join - sql += ") values (@"; - sql += String.Join(", @", cols); - sql += ")"; - SqlCommand cmd = new SqlCommand(sql); - // this provides the binding for all our parameters, so - // much less code than it used to be - foreach (DataColumn col in dt.Columns) - { - cmd.Parameters.Add(createSqlParameter(col.ColumnName, col.DataType)); - } - return cmd; - } - - private static SqlCommand createUpdateCommand(string table, string pk, DataTable dt) - { - string sql = "update " + table + " set "; - string subsql = String.Empty; - foreach (DataColumn col in dt.Columns) - { - if (subsql.Length > 0) - { - // a map function would rock so much here - subsql += ", "; - } - subsql += col.ColumnName + "= @" + col.ColumnName; - } - sql += subsql; - sql += " where " + pk; - SqlCommand cmd = new SqlCommand(sql); - // this provides the binding for all our parameters, so - // much less code than it used to be - - foreach (DataColumn col in dt.Columns) - { - cmd.Parameters.Add(createSqlParameter(col.ColumnName, col.DataType)); - } - return cmd; - } - - - private static string defineTable(DataTable dt) - { - string sql = "create table " + dt.TableName + "("; - string subsql = String.Empty; - foreach (DataColumn col in dt.Columns) - { - if (subsql.Length > 0) - { - // a map function would rock so much here - subsql += ",\n"; - } - subsql += col.ColumnName + " " + SqlType(col.DataType); - if (dt.PrimaryKey.Length > 0 && col == dt.PrimaryKey[0]) - { - subsql += " primary key"; - } - } - sql += subsql; - sql += ")"; - - return sql; - } - - private static void fillTerrainRow(DataRow row, LLUUID regionUUID, int rev, double[,] val) - { - row["RegionUUID"] = regionUUID; - row["Revision"] = rev; - - MemoryStream str = new MemoryStream(65536*sizeof (double)); - BinaryWriter bw = new BinaryWriter(str); - - // TODO: COMPATIBILITY - Add byte-order conversions - for (int x = 0; x < 256; x++) - for (int y = 0; y < 256; y++) - bw.Write(val[x, y]); - - row["Heightfield"] = str.ToArray(); - } - - /*********************************************************************** - * - * Database Binding functions - * - * These will be db specific due to typing, and minor differences - * in databases. - * - **********************************************************************/ - - /// - /// This is a convenience function that collapses 5 repetitive - /// lines for defining SqlParameters to 2 parameters: - /// column name and database type. - /// - /// It assumes certain conventions like :param as the param - /// name to replace in parametrized queries, and that source - /// version is always current version, both of which are fine - /// for us. - /// - ///a built Sql parameter - private static SqlParameter createSqlParameter(string name, Type type) - { - SqlParameter param = new SqlParameter(); - param.ParameterName = "@" + name; - param.DbType = dbtypeFromType(type); - param.SourceColumn = name; - param.SourceVersion = DataRowVersion.Current; - return param; - } - - private void setupPrimCommands(SqlDataAdapter da, SqlConnection conn) - { - da.InsertCommand = createInsertCommand("prims", ds.Tables["prims"]); - da.InsertCommand.Connection = conn; - - da.UpdateCommand = createUpdateCommand("prims", "UUID=@UUID", ds.Tables["prims"]); - da.UpdateCommand.Connection = conn; - - SqlCommand delete = new SqlCommand("delete from prims where UUID = @UUID"); - delete.Parameters.Add(createSqlParameter("UUID", typeof (String))); - delete.Connection = conn; - da.DeleteCommand = delete; - } - - private void setupShapeCommands(SqlDataAdapter da, SqlConnection conn) - { - da.InsertCommand = createInsertCommand("primshapes", ds.Tables["primshapes"]); - da.InsertCommand.Connection = conn; - - da.UpdateCommand = createUpdateCommand("primshapes", "UUID=@UUID", ds.Tables["primshapes"]); - da.UpdateCommand.Connection = conn; - - SqlCommand delete = new SqlCommand("delete from primshapes where UUID = @UUID"); - delete.Parameters.Add(createSqlParameter("UUID", typeof (String))); - delete.Connection = conn; - da.DeleteCommand = delete; - } - - private void setupTerrainCommands(SqlDataAdapter da, SqlConnection conn) - { - da.InsertCommand = createInsertCommand("terrain", ds.Tables["terrain"]); - da.InsertCommand.Connection = conn; - } - - private static void InitDB(SqlConnection conn) - { - string createPrims = defineTable(createPrimTable()); - string createShapes = defineTable(createShapeTable()); - string createTerrain = defineTable(createTerrainTable()); - - SqlCommand pcmd = new SqlCommand(createPrims, conn); - SqlCommand scmd = new SqlCommand(createShapes, conn); - SqlCommand tcmd = new SqlCommand(createTerrain, conn); - conn.Open(); - try - { - pcmd.ExecuteNonQuery(); - pcmd.Dispose(); - } - catch (SqlException) - { - m_log.Warn("[MSSQL]: Primitives Table Already Exists"); - } - - try - { - scmd.ExecuteNonQuery(); - scmd.Dispose(); - } - catch (SqlException) - { - m_log.Warn("[MSSQL]: Shapes Table Already Exists"); - } - - try - { - tcmd.ExecuteNonQuery(); - tcmd.Dispose(); - } - catch (SqlException) - { - m_log.Warn("[MSSQL]: Terrain Table Already Exists"); - } - - conn.Close(); - } - - private static bool TestTables(SqlConnection conn) - { - SqlCommand primSelectCmd = new SqlCommand(primSelect, conn); - SqlDataAdapter pDa = new SqlDataAdapter(primSelectCmd); - SqlCommand shapeSelectCmd = new SqlCommand(shapeSelect, conn); - SqlDataAdapter sDa = new SqlDataAdapter(shapeSelectCmd); - SqlCommand terrainSelectCmd = new SqlCommand(terrainSelect, conn); - SqlDataAdapter tDa = new SqlDataAdapter(terrainSelectCmd); - - DataSet tmpDS = new DataSet(); - try - { - pDa.Fill(tmpDS, "prims"); - sDa.Fill(tmpDS, "primshapes"); - tDa.Fill(tmpDS, "terrain"); - } - catch (SqlException) - { - m_log.Info("[DATASTORE]: MSSQL Database doesn't exist... creating"); - InitDB(conn); - } - - try - { - if (tmpDS.Tables == null || tmpDS.Tables.Count == 0) - { - pDa.Fill(tmpDS, "prims"); - sDa.Fill(tmpDS, "primshapes"); - tDa.Fill(tmpDS, "terrain"); - } - } - catch (SqlException e) - { - m_log.Info("[DATASTORE]: " + e.ToString()); - } - - foreach (DataColumn col in createPrimTable().Columns) - { - if (!tmpDS.Tables["prims"].Columns.Contains(col.ColumnName)) - { - m_log.Info("[DATASTORE]: Missing required column:" + col.ColumnName); - return false; - } - } - foreach (DataColumn col in createShapeTable().Columns) - { - if (!tmpDS.Tables["primshapes"].Columns.Contains(col.ColumnName)) - { - m_log.Info("[DATASTORE]: Missing required column:" + col.ColumnName); - return false; - } - } - foreach (DataColumn col in createTerrainTable().Columns) - { - if (!tmpDS.Tables["terrain"].Columns.Contains(col.ColumnName)) - { - m_log.Info("[DATASTORE]: Missing require column:" + col.ColumnName); - return false; - } - } - return true; - } - - /*********************************************************************** - * - * Type conversion functions - * - **********************************************************************/ - - private static DbType dbtypeFromType(Type type) - { - if (type == typeof (String)) - { - return DbType.String; - } - else if (type == typeof (Int32)) - { - return DbType.Int32; - } - else if (type == typeof (Double)) - { - return DbType.Double; - } - else if (type == typeof (Byte[])) - { - return DbType.Binary; - } - else - { - return DbType.String; - } - } - - // this is something we'll need to implement for each db - // slightly differently. - private static string SqlType(Type type) - { - if (type == typeof (String)) - { - return "varchar(255)"; - } - else if (type == typeof (Int32)) - { - return "integer"; - } - else if (type == typeof (Double)) - { - return "float"; - } - else if (type == typeof (Byte[])) - { - return "image"; - } - else - { - return "string"; - } - } - } -} -- cgit v1.1