From 41f1c5b7f712ed9c093ce421b39460c7711aece4 Mon Sep 17 00:00:00 2001 From: Robert Adams Date: Sun, 2 Dec 2012 23:39:17 -0800 Subject: BulletSim: rework angular corrections to remove any hybrid code and compute absolute collections. --- OpenSim/Region/Physics/BulletSPlugin/BSDynamics.cs | 204 ++++++++++----------- OpenSim/Region/Physics/BulletSPlugin/BSMotors.cs | 17 +- OpenSim/Region/Physics/BulletSPlugin/BSScene.cs | 4 +- .../Region/Physics/BulletSPlugin/BulletSimTODO.txt | 1 + 4 files changed, 115 insertions(+), 111 deletions(-) (limited to 'OpenSim/Region') diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSDynamics.cs b/OpenSim/Region/Physics/BulletSPlugin/BSDynamics.cs index 4d067cf..525aac4 100644 --- a/OpenSim/Region/Physics/BulletSPlugin/BSDynamics.cs +++ b/OpenSim/Region/Physics/BulletSPlugin/BSDynamics.cs @@ -98,7 +98,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin private float m_angularMotorTimescale = 0; // motor angular velocity ramp up rate private float m_angularMotorDecayTimescale = 0; // motor angular velocity decay rate private Vector3 m_angularFrictionTimescale = Vector3.Zero; // body angular velocity decay rate - private Vector3 m_lastAngularVelocity = Vector3.Zero; // what was last applied to body + private Vector3 m_lastAngularCorrection = Vector3.Zero; private Vector3 m_lastVertAttractor = Vector3.Zero; // what VA was last applied to body //Deflection properties @@ -111,6 +111,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin private float m_bankingEfficiency = 0; private float m_bankingMix = 0; private float m_bankingTimescale = 0; + private Vector3 m_lastBanking = Vector3.Zero; //Hover and Buoyancy properties private float m_VhoverHeight = 0f; @@ -152,7 +153,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin m_angularDeflectionTimescale = Math.Max(pValue, 0.01f); break; case Vehicle.ANGULAR_MOTOR_DECAY_TIMESCALE: - m_angularMotorDecayTimescale = Math.Max(0.01f, Math.Min(pValue,120)); + m_angularMotorDecayTimescale = ClampInRange(0.01f, pValue, 120); m_angularMotor.TargetValueDecayTimeScale = m_angularMotorDecayTimescale; break; case Vehicle.ANGULAR_MOTOR_TIMESCALE: @@ -240,9 +241,9 @@ namespace OpenSim.Region.Physics.BulletSPlugin break; case Vehicle.ANGULAR_MOTOR_DIRECTION: // Limit requested angular speed to 2 rps= 4 pi rads/sec - pValue.X = Math.Max(-12.56f, Math.Min(pValue.X, 12.56f)); - pValue.Y = Math.Max(-12.56f, Math.Min(pValue.Y, 12.56f)); - pValue.Z = Math.Max(-12.56f, Math.Min(pValue.Z, 12.56f)); + pValue.X = ClampInRange(-12.56f, pValue.X, 12.56f); + pValue.Y = ClampInRange(-12.56f, pValue.Y, 12.56f); + pValue.Z = ClampInRange(-12.56f, pValue.Z, 12.56f); m_angularMotorDirection = new Vector3(pValue.X, pValue.Y, pValue.Z); m_angularMotor.SetTarget(m_angularMotorDirection); break; @@ -328,6 +329,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin m_bankingEfficiency = 0; m_bankingTimescale = 1000; m_bankingMix = 1; + m_lastBanking = Vector3.Zero; m_referenceFrame = Quaternion.Identity; m_flags = (VehicleFlag)0; @@ -362,6 +364,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin m_bankingEfficiency = 0; m_bankingTimescale = 10; m_bankingMix = 1; + m_lastBanking = Vector3.Zero; m_referenceFrame = Quaternion.Identity; m_flags &= ~(VehicleFlag.HOVER_WATER_ONLY @@ -400,6 +403,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin m_bankingEfficiency = -0.2f; m_bankingMix = 1; m_bankingTimescale = 1; + m_lastBanking = Vector3.Zero; m_referenceFrame = Quaternion.Identity; m_flags &= ~(VehicleFlag.HOVER_WATER_ONLY @@ -438,6 +442,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin m_bankingEfficiency = -0.3f; m_bankingMix = 0.8f; m_bankingTimescale = 1; + m_lastBanking = Vector3.Zero; m_referenceFrame = Quaternion.Identity; m_flags &= ~(VehicleFlag.HOVER_TERRAIN_ONLY @@ -476,6 +481,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin m_bankingEfficiency = 1; m_bankingMix = 0.7f; m_bankingTimescale = 2; + m_lastBanking = Vector3.Zero; m_referenceFrame = Quaternion.Identity; m_flags &= ~(VehicleFlag.HOVER_WATER_ONLY @@ -514,6 +520,8 @@ namespace OpenSim.Region.Physics.BulletSPlugin m_bankingEfficiency = 0; m_bankingMix = 0.7f; m_bankingTimescale = 5; + m_lastBanking = Vector3.Zero; + m_referenceFrame = Quaternion.Identity; m_referenceFrame = Quaternion.Identity; @@ -627,12 +635,16 @@ namespace OpenSim.Region.Physics.BulletSPlugin { if (m_knownChanged != 0) { - if ((m_knownChanged & m_knownChangedPosition) != 0) Prim.ForcePosition = VehiclePosition; - if ((m_knownChanged & m_knownChangedOrientation) != 0) Prim.ForceOrientation = VehicleOrientation; - if ((m_knownChanged & m_knownChangedVelocity) != 0) Prim.ForceVelocity = VehicleVelocity; - if ((m_knownChanged & m_knownChangedRotationalVelocity) != 0) Prim.ForceRotationalVelocity = VehicleRotationalVelocity; - // If we set one of the values (ie, the physics engine doesn't do it) we must make sure there - // is an UpdateProperties event to send the changes up to the simulator. + if ((m_knownChanged & m_knownChangedPosition) != 0) + Prim.ForcePosition = VehiclePosition; + if ((m_knownChanged & m_knownChangedOrientation) != 0) + Prim.ForceOrientation = VehicleOrientation; + if ((m_knownChanged & m_knownChangedVelocity) != 0) + Prim.ForceVelocity = VehicleVelocity; + if ((m_knownChanged & m_knownChangedRotationalVelocity) != 0) + Prim.ForceRotationalVelocity = VehicleRotationalVelocity; + // If we set one of the values (ie, the physics engine didn't do it) we must force + // an UpdateProperties event to send the changes up to the simulator. BulletSimAPI.PushUpdate2(Prim.PhysBody.ptr); } } @@ -957,9 +969,12 @@ namespace OpenSim.Region.Physics.BulletSPlugin // ======================================================================= // ======================================================================= // Apply the effect of the angular motor. + // The 'contribution' is how much angular correction each function wants. + // All the contributions are added together and the orientation of the vehicle + // is changed by all the contributed corrections. private void MoveAngular(float pTimestep) { - Vector3 angularMotorContribution = m_angularMotor.Step(pTimestep); + Vector3 angularMotorContribution = m_angularMotor.Step(); // ================================================================== // From http://wiki.secondlife.com/wiki/LlSetVehicleFlags : @@ -974,22 +989,41 @@ namespace OpenSim.Region.Physics.BulletSPlugin VDetailLog("{0}, MoveAngular,noDeflectionUp,angularMotorContrib={1}", Prim.LocalID, angularMotorContribution); } - Vector3 verticalAttractionContribution = ComputeAngularVerticalAttraction(pTimestep); + Vector3 verticalAttractionContribution = ComputeAngularVerticalAttraction(); - Vector3 deflectionContribution = ComputeAngularDeflection(pTimestep); + Vector3 deflectionContribution = ComputeAngularDeflection(); - Vector3 bankingContribution = ComputeAngularBanking(pTimestep); + Vector3 bankingContribution = ComputeAngularBanking(angularMotorContribution.Z); // ================================================================== m_lastVertAttractor = verticalAttractionContribution; - // Sum velocities - m_lastAngularVelocity = angularMotorContribution + // Sum corrections + m_lastAngularCorrection = angularMotorContribution + verticalAttractionContribution + deflectionContribution + bankingContribution; // ================================================================== + // The correction is applied to the current orientation. + // Any angular velocity on the vehicle is not us so zero the current value. + VehicleRotationalVelocity = Vector3.Zero; + if (!m_lastAngularCorrection.ApproxEquals(Vector3.Zero, 0.01f)) + { + Vector3 scaledCorrection = m_lastAngularCorrection * pTimestep; + Quaternion quatCorrection = Quaternion.CreateFromEulers(scaledCorrection); + + VehicleOrientation = Quaternion.Add(VehicleOrientation, quatCorrection); + + VDetailLog("{0}, MoveAngular,done,nonZero,angMotorContrib={1},vertAttrContrib={2},bankContrib={3},deflectContrib={4},totalContrib={5},scaledCorr={6}", + Prim.LocalID, + angularMotorContribution, verticalAttractionContribution, + bankingContribution, deflectionContribution, + m_lastAngularCorrection, scaledCorrection + ); + } + + // ================================================================== //Offset section if (m_linearMotorOffset != Vector3.Zero) { @@ -1020,50 +1054,18 @@ namespace OpenSim.Region.Physics.BulletSPlugin VDetailLog("{0}, BSDynamic.MoveAngular,motorOffset,applyTorqueImpulse={1}", Prim.LocalID, torqueFromOffset); } - // ================================================================== - if (m_lastAngularVelocity.ApproxEquals(Vector3.Zero, 0.01f)) - { - // TODO: zeroing is good but it also sets values in unmanaged code. Remove the stores when idle. - VDetailLog("{0}, MoveAngular,done,zero", Prim.LocalID); - VehicleRotationalVelocity = Vector3.Zero; - Prim.ZeroAngularMotion(true); - } - else - { - // Apply to the body. - // The above calculates the absolute angular velocity needed. Angular velocity is massless. - // Since we are stuffing the angular velocity directly into the object, the computed - // velocity needs to be scaled by the timestep. - // Also remove any motion that is on the object so added motion is only from vehicle. - Vector3 setAngularVelocity = ((m_lastAngularVelocity * pTimestep) - VehicleRotationalVelocity); - VehicleRotationalVelocity = setAngularVelocity; - - VDetailLog("{0}, MoveAngular,done,nonZero,angMotorContrib={1},vertAttrContrib={2},bankContrib={3},deflectContrib={4},totalContrib={5},setAngVelocity={6}", - Prim.LocalID, - angularMotorContribution, verticalAttractionContribution, - bankingContribution, deflectionContribution, - m_lastAngularVelocity, setAngularVelocity - ); - } } - public Vector3 ComputeAngularVerticalAttraction(float pTimestep) + public Vector3 ComputeAngularVerticalAttraction() { Vector3 ret = Vector3.Zero; // If vertical attaction timescale is reasonable and we applied an angular force last time... if (m_verticalAttractionTimescale < 500) { - /* - Vector3 verticalError = Vector3.UnitZ * VehicleOrientation; - verticalError.Normalize(); - m_verticalAttractionMotor.SetCurrent(verticalError); - m_verticalAttractionMotor.SetTarget(Vector3.UnitZ); - ret = m_verticalAttractionMotor.Step(pTimestep); - */ // Take a vector pointing up and convert it from world to vehicle relative coords. Vector3 verticalError = Vector3.UnitZ * VehicleOrientation; - verticalError.Normalize(); + // verticalError.Normalize(); // If vertical attraction correction is needed, the vector that was pointing up (UnitZ) // is now leaning to one side (rotated around the X axis) and the Y value will @@ -1087,56 +1089,63 @@ namespace OpenSim.Region.Physics.BulletSPlugin // scale by the time scale and timestep Vector3 unscaledContrib = ret; ret /= m_verticalAttractionTimescale; - ret *= pTimestep; + // This returns the angular correction desired. Timestep is added later. + // ret *= pTimestep; // apply efficiency Vector3 preEfficiencyContrib = ret; + // TODO: implement efficiency. // Effenciency squared seems to give a more realistic effect float efficencySquared = m_verticalAttractionEfficiency * m_verticalAttractionEfficiency; - ret *= efficencySquared; + // ret *= efficencySquared; VDetailLog("{0}, MoveAngular,verticalAttraction,,verticalError={1},unscaled={2},preEff={3},eff={4},effSq={5},vertAttr={6}", Prim.LocalID, verticalError, unscaledContrib, preEfficiencyContrib, m_verticalAttractionEfficiency, efficencySquared, ret); - } return ret; } - public Vector3 ComputeAngularDeflection(float pTimestep) + // Return the angular correction to correct the direction the vehicle is pointing to be + // the direction is should want to be pointing. + public Vector3 ComputeAngularDeflection() { Vector3 ret = Vector3.Zero; if (m_angularDeflectionEfficiency != 0) { - // Compute a scaled vector that points in the preferred axis (X direction) - Vector3 scaledDefaultDirection = - new Vector3((pTimestep * 10 * (m_angularDeflectionEfficiency / m_angularDeflectionTimescale)), 0, 0); - // Adding the current vehicle orientation and reference frame displaces the orientation to the frame. - // Rotate the scaled default axix relative to the actual vehicle direction giving where it should point. - Vector3 preferredAxisOfMotion = scaledDefaultDirection * Quaternion.Add(VehicleOrientation, m_referenceFrame); + // Where the vehicle should want to point relative to the vehicle + Vector3 preferredDirection = Vector3.UnitX * m_referenceFrame; + + // Where the vehicle is pointing relative to the vehicle. + Vector3 currentDirection = Vector3.UnitX * Quaternion.Add(VehicleOrientation, m_referenceFrame); - // Scale by efficiency and timescale - ret = (preferredAxisOfMotion * (m_angularDeflectionEfficiency) / m_angularDeflectionTimescale) * pTimestep; + // Difference between where vehicle is pointing and where it should wish to point + Vector3 directionCorrection = preferredDirection - currentDirection; - VDetailLog("{0}, MoveAngular,Deflection,perfAxis={1},deflection={2}", Prim.LocalID, preferredAxisOfMotion, ret); + // Scale the correction by recovery timescale and efficiency + ret = directionCorrection * m_angularDeflectionEfficiency / m_angularDeflectionTimescale; - // This deflection computation is not correct. - ret = Vector3.Zero; + VDetailLog("{0}, MoveAngular,Deflection,perfDir={1},currentDir={2},dirCorrection={3},ret={4}", + Prim.LocalID, preferredDirection, currentDirection, directionCorrection, ret); } return ret; } - public Vector3 ComputeAngularBanking(float pTimestep) + // Return an angular change to tip the vehicle (around X axis) when turning (turned around Z). + // Remembers the last banking value calculated and returns the difference needed this tick. + // TurningFactor is rate going left or right (pos=left, neg=right, scale=0..1). + public Vector3 ComputeAngularBanking(float turningFactor) { Vector3 ret = Vector3.Zero; + Vector3 computedBanking = Vector3.Zero; if (m_bankingEfficiency != 0) { - Vector3 dir = Vector3.One * VehicleOrientation; + Vector3 currentDirection = Vector3.UnitX * VehicleOrientation; + float mult = (m_bankingMix * m_bankingMix) * -1 * (m_bankingMix < 0 ? -1 : 1); - //Changes which way it banks in and out of turns //Use the square of the efficiency, as it looks much more how SL banking works float effSquared = (m_bankingEfficiency * m_bankingEfficiency); @@ -1144,51 +1153,27 @@ namespace OpenSim.Region.Physics.BulletSPlugin effSquared *= -1; //Keep the negative! float mix = Math.Abs(m_bankingMix); - if (m_angularMotorVelocity.X == 0) - { - // The vehicle is stopped - /*if (!parent.Orientation.ApproxEquals(this.m_referenceFrame, 0.25f)) - { - Vector3 axisAngle; - float angle; - parent.Orientation.GetAxisAngle(out axisAngle, out angle); - Vector3 rotatedVel = parent.Velocity * parent.Orientation; - if ((rotatedVel.X < 0 && axisAngle.Y > 0) || (rotatedVel.X > 0 && axisAngle.Y < 0)) - m_angularMotorVelocity.X += (effSquared * (mult * mix)) * (1f) * 10; - else - m_angularMotorVelocity.X += (effSquared * (mult * mix)) * (-1f) * 10; - }*/ - } - else - { - ret.Z += (effSquared * (mult * mix)) * (m_angularMotorVelocity.X) * 4; - } + // TODO: Must include reference frame. + float forwardSpeed = VehicleVelocity.X; - //If they are colliding, we probably shouldn't shove the prim around... probably - if (!Prim.IsColliding && Math.Abs(m_angularMotorVelocity.X) > mix) + if (!Prim.IsColliding && forwardSpeed > mix) { - float angVelZ = m_angularMotorVelocity.X * -1; - /*if(angVelZ > mix) - angVelZ = mix; - else if(angVelZ < -mix) - angVelZ = -mix;*/ - //This controls how fast and how far the banking occurs - Vector3 bankingRot = new Vector3(angVelZ * (effSquared * mult), 0, 0); - if (bankingRot.X > 3) - bankingRot.X = 3; - else if (bankingRot.X < -3) - bankingRot.X = -3; - bankingRot *= VehicleOrientation; - ret += bankingRot; + computedBanking.X = ClampInRange(-3f, turningFactor * (effSquared * mult), 3f); } - m_angularMotorVelocity.X *= m_bankingEfficiency == 1 ? 0.0f : 1 - m_bankingEfficiency; - VDetailLog("{0}, MoveAngular,Banking,bEff={1},angMotVel={2},effSq={3},mult={4},mix={5},banking={6}", - Prim.LocalID, m_bankingEfficiency, m_angularMotorVelocity, effSquared, mult, mix, ret); + + // 'computedBanking' is now how much banking that should be happening. + ret = computedBanking - m_lastBanking; + + // Scale the correction by timescale and efficiency + ret /= m_bankingTimescale * m_bankingEfficiency; + + VDetailLog("{0}, MoveAngular,Banking,computedB={1},lastB={2},bEff={3},effSq={4},mult={5},mix={6},banking={7}", + Prim.LocalID, computedBanking, m_lastBanking, m_bankingEfficiency, effSquared, mult, mix, ret); } + m_lastBanking = computedBanking; return ret; } - // This is from previous instantiations of XXXDynamics.cs. // Applies roll reference frame. // TODO: is this the right way to separate the code to do this operation? @@ -1229,6 +1214,11 @@ namespace OpenSim.Region.Physics.BulletSPlugin } + private float ClampInRange(float low, float val, float high) + { + return Math.Max(low, Math.Min(val, high)); + } + // Invoke the detailed logger and output something if it's enabled. private void VDetailLog(string msg, params Object[] args) { diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSMotors.cs b/OpenSim/Region/Physics/BulletSPlugin/BSMotors.cs index e9f1549..851d508 100755 --- a/OpenSim/Region/Physics/BulletSPlugin/BSMotors.cs +++ b/OpenSim/Region/Physics/BulletSPlugin/BSMotors.cs @@ -63,10 +63,23 @@ public abstract class BSMotor } } // Can all the incremental stepping be replaced with motor classes? + +// Motor which moves CurrentValue to TargetValue over TimeScale seconds. +// The TargetValue is decays in TargetValueDecayTimeScale and +// the CurrentValue will be held back by FrictionTimeScale. +// TimeScale and TargetDelayTimeScale may be 'infinite' which means go decay. + +// For instance, if something is moving at speed X and the desired speed is Y, +// CurrentValue is X and TargetValue is Y. As the motor is stepped, new +// values of CurrentValue are returned that approach the TargetValue. +// The feature of decaying TargetValue is so vehicles will eventually +// come to a stop rather than run forever. This can be disabled by +// setting TargetValueDecayTimescale to 'infinite'. +// The change from CurrentValue to TargetValue is linear over TimeScale seconds. public class BSVMotor : BSMotor { - public Vector3 FrameOfReference { get; set; } - public Vector3 Offset { get; set; } + // public Vector3 FrameOfReference { get; set; } + // public Vector3 Offset { get; set; } public float TimeScale { get; set; } public float TargetValueDecayTimeScale { get; set; } diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSScene.cs b/OpenSim/Region/Physics/BulletSPlugin/BSScene.cs index 17cc7b4..f72bd74 100644 --- a/OpenSim/Region/Physics/BulletSPlugin/BSScene.cs +++ b/OpenSim/Region/Physics/BulletSPlugin/BSScene.cs @@ -501,7 +501,7 @@ public sealed class BSScene : PhysicsScene, IPhysicsParameters try { - // if (VehicleLoggingEnabled) DumpVehicles(); // DEBUG + if (VehicleLoggingEnabled) DumpVehicles(); // DEBUG if (PhysicsLogging.Enabled) beforeTime = Util.EnvironmentTickCount(); numSubSteps = BulletSimAPI.PhysicsStep2(World.ptr, timeStep, m_maxSubSteps, m_fixedTimeStep, @@ -510,7 +510,7 @@ public sealed class BSScene : PhysicsScene, IPhysicsParameters if (PhysicsLogging.Enabled) simTime = Util.EnvironmentTickCountSubtract(beforeTime); DetailLog("{0},Simulate,call, frame={1}, nTaints={2}, simTime={3}, substeps={4}, updates={5}, colliders={6}", DetailLogZero, m_simulationStep, numTaints, simTime, numSubSteps, updatedEntityCount, collidersCount); - // if (VehicleLoggingEnabled) DumpVehicles(); // DEBUG + if (VehicleLoggingEnabled) DumpVehicles(); // DEBUG } catch (Exception e) { diff --git a/OpenSim/Region/Physics/BulletSPlugin/BulletSimTODO.txt b/OpenSim/Region/Physics/BulletSPlugin/BulletSimTODO.txt index ca71313..68f25fc 100755 --- a/OpenSim/Region/Physics/BulletSPlugin/BulletSimTODO.txt +++ b/OpenSim/Region/Physics/BulletSPlugin/BulletSimTODO.txt @@ -28,6 +28,7 @@ Small physical objects do not interact correctly Add material type linkage and input all the material property definitions. Skeleton classes and table are in the sources but are not filled or used. Add PID motor for avatar movement (slow to stop, ...) +Implement function efficiency for lineaar and angular motion. After getting off a vehicle, the root prim is phantom (can be walked through) Need to force a position update for the root prim after compound shape destruction -- cgit v1.1