From 1d6b33bc2da3b312cff1d1802a73aacdf72b0385 Mon Sep 17 00:00:00 2001 From: Diva Canto Date: Sun, 30 Aug 2015 20:06:53 -0700 Subject: Major renaming of Physics dlls / folders. No functional changes, just renames. --- OpenSim/Region/PhysicsModules/BulletS/BSPrim.cs | 1896 +++++++++++++++++++++++ 1 file changed, 1896 insertions(+) create mode 100644 OpenSim/Region/PhysicsModules/BulletS/BSPrim.cs (limited to 'OpenSim/Region/PhysicsModules/BulletS/BSPrim.cs') diff --git a/OpenSim/Region/PhysicsModules/BulletS/BSPrim.cs b/OpenSim/Region/PhysicsModules/BulletS/BSPrim.cs new file mode 100644 index 0000000..a00991f --- /dev/null +++ b/OpenSim/Region/PhysicsModules/BulletS/BSPrim.cs @@ -0,0 +1,1896 @@ +/* + * Copyright (c) Contributors, http://opensimulator.org/ + * See CONTRIBUTORS.TXT for a full list of copyright holders. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyrightD + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of the OpenSimulator Project nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +using System; +using System.Reflection; +using System.Collections.Generic; +using System.Xml; +using log4net; +using OMV = OpenMetaverse; +using OpenSim.Framework; +using OpenSim.Region.Physics.Manager; +using OpenSim.Region.Physics.ConvexDecompositionDotNet; +using OpenSim.Region.OptionalModules.Scripting; // for ExtendedPhysics + +namespace OpenSim.Region.Physics.BulletSPlugin +{ + + [Serializable] +public class BSPrim : BSPhysObject +{ + protected static readonly ILog m_log = LogManager.GetLogger(MethodBase.GetCurrentMethod().DeclaringType); + private static readonly string LogHeader = "[BULLETS PRIM]"; + + // _size is what the user passed. Scale is what we pass to the physics engine with the mesh. + private OMV.Vector3 _size; // the multiplier for each mesh dimension as passed by the user + + private bool _grabbed; + private bool _isSelected; + private bool _isVolumeDetect; + + private float _mass; // the mass of this object + private OMV.Vector3 _acceleration; + private int _physicsActorType; + private bool _isPhysical; + private bool _flying; + private bool _setAlwaysRun; + private bool _throttleUpdates; + private bool _floatOnWater; + private OMV.Vector3 _rotationalVelocity; + private bool _kinematic; + private float _buoyancy; + + private int CrossingFailures { get; set; } + + // Keep a handle to the vehicle actor so it is easy to set parameters on same. + public const string VehicleActorName = "BasicVehicle"; + + // Parameters for the hover actor + public const string HoverActorName = "BSPrim.HoverActor"; + // Parameters for the axis lock actor + public const String LockedAxisActorName = "BSPrim.LockedAxis"; + // Parameters for the move to target actor + public const string MoveToTargetActorName = "BSPrim.MoveToTargetActor"; + // Parameters for the setForce and setTorque actors + public const string SetForceActorName = "BSPrim.SetForceActor"; + public const string SetTorqueActorName = "BSPrim.SetTorqueActor"; + + public BSPrim(uint localID, String primName, BSScene parent_scene, OMV.Vector3 pos, OMV.Vector3 size, + OMV.Quaternion rotation, PrimitiveBaseShape pbs, bool pisPhysical) + : base(parent_scene, localID, primName, "BSPrim") + { + // m_log.DebugFormat("{0}: BSPrim creation of {1}, id={2}", LogHeader, primName, localID); + _physicsActorType = (int)ActorTypes.Prim; + RawPosition = pos; + _size = size; + Scale = size; // prims are the size the user wants them to be (different for BSCharactes). + RawOrientation = rotation; + _buoyancy = 0f; + RawVelocity = OMV.Vector3.Zero; + _rotationalVelocity = OMV.Vector3.Zero; + BaseShape = pbs; + _isPhysical = pisPhysical; + _isVolumeDetect = false; + + _mass = CalculateMass(); + + DetailLog("{0},BSPrim.constructor,pbs={1}", LocalID, BSScene.PrimitiveBaseShapeToString(pbs)); + // DetailLog("{0},BSPrim.constructor,call", LocalID); + // do the actual object creation at taint time + PhysScene.TaintedObject(LocalID, "BSPrim.create", delegate() + { + // Make sure the object is being created with some sanity. + ExtremeSanityCheck(true /* inTaintTime */); + + CreateGeomAndObject(true); + + CurrentCollisionFlags = PhysScene.PE.GetCollisionFlags(PhysBody); + + IsInitialized = true; + }); + } + + // called when this prim is being destroyed and we should free all the resources + public override void Destroy() + { + // m_log.DebugFormat("{0}: Destroy, id={1}", LogHeader, LocalID); + IsInitialized = false; + + base.Destroy(); + + // Undo any vehicle properties + this.VehicleType = (int)Vehicle.TYPE_NONE; + + PhysScene.TaintedObject(LocalID, "BSPrim.Destroy", delegate() + { + DetailLog("{0},BSPrim.Destroy,taint,", LocalID); + // If there are physical body and shape, release my use of same. + PhysScene.Shapes.DereferenceBody(PhysBody, null); + PhysBody.Clear(); + PhysShape.Dereference(PhysScene); + PhysShape = new BSShapeNull(); + }); + } + + // No one uses this property. + public override bool Stopped { + get { return false; } + } + + public override bool IsIncomplete { + get { + return ShapeRebuildScheduled; + } + } + + // 'true' if this object's shape is in need of a rebuild and a rebuild has been queued. + // The prim is still available but its underlying shape will change soon. + // This is protected by a 'lock(this)'. + public bool ShapeRebuildScheduled { get; protected set; } + + public override OMV.Vector3 Size { + get { return _size; } + set { + // We presume the scale and size are the same. If scale must be changed for + // the physical shape, that is done when the geometry is built. + _size = value; + Scale = _size; + ForceBodyShapeRebuild(false); + } + } + + public override PrimitiveBaseShape Shape { + set { + BaseShape = value; + DetailLog("{0},BSPrim.changeShape,pbs={1}", LocalID, BSScene.PrimitiveBaseShapeToString(BaseShape)); + PrimAssetState = PrimAssetCondition.Unknown; + ForceBodyShapeRebuild(false); + } + } + // Cause the body and shape of the prim to be rebuilt if necessary. + // If there are no changes required, this is quick and does not make changes to the prim. + // If rebuilding is necessary (like changing from static to physical), that will happen. + // The 'ShapeRebuildScheduled' tells any checker that the body/shape may change shortly. + // The return parameter is not used by anyone. + public override bool ForceBodyShapeRebuild(bool inTaintTime) + { + if (inTaintTime) + { + // If called in taint time, do the operation immediately + _mass = CalculateMass(); // changing the shape changes the mass + CreateGeomAndObject(true); + } + else + { + lock (this) + { + // If a rebuild is not already in the queue + if (!ShapeRebuildScheduled) + { + // Remember that a rebuild is queued -- this is used to flag an incomplete object + ShapeRebuildScheduled = true; + PhysScene.TaintedObject(LocalID, "BSPrim.ForceBodyShapeRebuild", delegate() + { + _mass = CalculateMass(); // changing the shape changes the mass + CreateGeomAndObject(true); + ShapeRebuildScheduled = false; + }); + } + } + } + return true; + } + public override bool Grabbed { + set { _grabbed = value; + } + } + public override bool Selected { + set + { + if (value != _isSelected) + { + _isSelected = value; + PhysScene.TaintedObject(LocalID, "BSPrim.setSelected", delegate() + { + DetailLog("{0},BSPrim.selected,taint,selected={1}", LocalID, _isSelected); + SetObjectDynamic(false); + }); + } + } + } + public override bool IsSelected + { + get { return _isSelected; } + } + + public override void CrossingFailure() + { + CrossingFailures++; + if (CrossingFailures > BSParam.CrossingFailuresBeforeOutOfBounds) + { + base.RaiseOutOfBounds(RawPosition); + } + else if (CrossingFailures == BSParam.CrossingFailuresBeforeOutOfBounds) + { + m_log.WarnFormat("{0} Too many crossing failures for {1}", LogHeader, Name); + } + return; + } + + // link me to the specified parent + public override void link(PhysicsActor obj) { + } + + // delink me from my linkset + public override void delink() { + } + + // Set motion values to zero. + // Do it to the properties so the values get set in the physics engine. + // Push the setting of the values to the viewer. + // Called at taint time! + public override void ZeroMotion(bool inTaintTime) + { + RawVelocity = OMV.Vector3.Zero; + _acceleration = OMV.Vector3.Zero; + _rotationalVelocity = OMV.Vector3.Zero; + + // Zero some other properties in the physics engine + PhysScene.TaintedObject(inTaintTime, LocalID, "BSPrim.ZeroMotion", delegate() + { + if (PhysBody.HasPhysicalBody) + PhysScene.PE.ClearAllForces(PhysBody); + }); + } + public override void ZeroAngularMotion(bool inTaintTime) + { + _rotationalVelocity = OMV.Vector3.Zero; + // Zero some other properties in the physics engine + PhysScene.TaintedObject(inTaintTime, LocalID, "BSPrim.ZeroMotion", delegate() + { + // DetailLog("{0},BSPrim.ZeroAngularMotion,call,rotVel={1}", LocalID, _rotationalVelocity); + if (PhysBody.HasPhysicalBody) + { + PhysScene.PE.SetInterpolationAngularVelocity(PhysBody, _rotationalVelocity); + PhysScene.PE.SetAngularVelocity(PhysBody, _rotationalVelocity); + } + }); + } + + public override void LockAngularMotion(OMV.Vector3 axis) + { + DetailLog("{0},BSPrim.LockAngularMotion,call,axis={1}", LocalID, axis); + + ApplyAxisLimits(ExtendedPhysics.PHYS_AXIS_UNLOCK_ANGULAR, 0f, 0f); + if (axis.X != 1) + { + ApplyAxisLimits(ExtendedPhysics.PHYS_AXIS_LOCK_ANGULAR_X, 0f, 0f); + } + if (axis.Y != 1) + { + ApplyAxisLimits(ExtendedPhysics.PHYS_AXIS_LOCK_ANGULAR_Y, 0f, 0f); + } + if (axis.Z != 1) + { + ApplyAxisLimits(ExtendedPhysics.PHYS_AXIS_LOCK_ANGULAR_Z, 0f, 0f); + } + + InitializeAxisActor(); + + return; + } + + public override OMV.Vector3 Position { + get { + // don't do the GetObjectPosition for root elements because this function is called a zillion times. + // RawPosition = ForcePosition; + return RawPosition; + } + set { + // If the position must be forced into the physics engine, use ForcePosition. + // All positions are given in world positions. + if (RawPosition == value) + { + DetailLog("{0},BSPrim.setPosition,call,positionNotChanging,pos={1},orient={2}", LocalID, RawPosition, RawOrientation); + return; + } + RawPosition = value; + PositionSanityCheck(false); + + PhysScene.TaintedObject(LocalID, "BSPrim.setPosition", delegate() + { + DetailLog("{0},BSPrim.SetPosition,taint,pos={1},orient={2}", LocalID, RawPosition, RawOrientation); + ForcePosition = RawPosition; + }); + } + } + + // NOTE: overloaded by BSPrimDisplaced to handle offset for center-of-gravity. + public override OMV.Vector3 ForcePosition { + get { + RawPosition = PhysScene.PE.GetPosition(PhysBody); + return RawPosition; + } + set { + RawPosition = value; + if (PhysBody.HasPhysicalBody) + { + PhysScene.PE.SetTranslation(PhysBody, RawPosition, RawOrientation); + ActivateIfPhysical(false); + } + } + } + + // Check that the current position is sane and, if not, modify the position to make it so. + // Check for being below terrain and being out of bounds. + // Returns 'true' of the position was made sane by some action. + private bool PositionSanityCheck(bool inTaintTime) + { + bool ret = false; + + // We don't care where non-physical items are placed + if (!IsPhysicallyActive) + return ret; + + if (!PhysScene.TerrainManager.IsWithinKnownTerrain(RawPosition)) + { + // The physical object is out of the known/simulated area. + // Upper levels of code will handle the transition to other areas so, for + // the time, we just ignore the position. + return ret; + } + + float terrainHeight = PhysScene.TerrainManager.GetTerrainHeightAtXYZ(RawPosition); + OMV.Vector3 upForce = OMV.Vector3.Zero; + float approxSize = Math.Max(Size.X, Math.Max(Size.Y, Size.Z)); + if ((RawPosition.Z + approxSize / 2f) < terrainHeight) + { + DetailLog("{0},BSPrim.PositionAdjustUnderGround,call,pos={1},terrain={2}", LocalID, RawPosition, terrainHeight); + float targetHeight = terrainHeight + (Size.Z / 2f); + // If the object is below ground it just has to be moved up because pushing will + // not get it through the terrain + RawPosition = new OMV.Vector3(RawPosition.X, RawPosition.Y, targetHeight); + if (inTaintTime) + { + ForcePosition = RawPosition; + } + // If we are throwing the object around, zero its other forces + ZeroMotion(inTaintTime); + ret = true; + } + + if ((CurrentCollisionFlags & CollisionFlags.BS_FLOATS_ON_WATER) != 0) + { + float waterHeight = PhysScene.TerrainManager.GetWaterLevelAtXYZ(RawPosition); + // TODO: a floating motor so object will bob in the water + if (Math.Abs(RawPosition.Z - waterHeight) > 0.1f) + { + // Upforce proportional to the distance away from the water. Correct the error in 1 sec. + upForce.Z = (waterHeight - RawPosition.Z) * 1f; + + // Apply upforce and overcome gravity. + OMV.Vector3 correctionForce = upForce - PhysScene.DefaultGravity; + DetailLog("{0},BSPrim.PositionSanityCheck,applyForce,pos={1},upForce={2},correctionForce={3}", LocalID, RawPosition, upForce, correctionForce); + AddForce(correctionForce, false, inTaintTime); + ret = true; + } + } + + return ret; + } + + // Occasionally things will fly off and really get lost. + // Find the wanderers and bring them back. + // Return 'true' if some parameter need some sanity. + private bool ExtremeSanityCheck(bool inTaintTime) + { + bool ret = false; + + int wayOverThere = -1000; + int wayOutThere = 10000; + // There have been instances of objects getting thrown way out of bounds and crashing + // the border crossing code. + if ( RawPosition.X < wayOverThere || RawPosition.X > wayOutThere + || RawPosition.Y < wayOverThere || RawPosition.X > wayOutThere + || RawPosition.Z < wayOverThere || RawPosition.X > wayOutThere) + { + RawPosition = new OMV.Vector3(10, 10, 50); + ZeroMotion(inTaintTime); + ret = true; + } + if (RawVelocity.LengthSquared() > BSParam.MaxLinearVelocitySquared) + { + RawVelocity = Util.ClampV(RawVelocity, BSParam.MaxLinearVelocity); + ret = true; + } + if (_rotationalVelocity.LengthSquared() > BSParam.MaxAngularVelocitySquared) + { + _rotationalVelocity = Util.ClampV(_rotationalVelocity, BSParam.MaxAngularVelocity); + ret = true; + } + + return ret; + } + + // Return the effective mass of the object. + // The definition of this call is to return the mass of the prim. + // If the simulator cares about the mass of the linkset, it will sum it itself. + public override float Mass + { + get { return _mass; } + } + // TotalMass returns the mass of the large object the prim may be in (overridden by linkset code) + public virtual float TotalMass + { + get { return _mass; } + } + // used when we only want this prim's mass and not the linkset thing + public override float RawMass { + get { return _mass; } + } + // Set the physical mass to the passed mass. + // Note that this does not change _mass! + public override void UpdatePhysicalMassProperties(float physMass, bool inWorld) + { + if (PhysBody.HasPhysicalBody && PhysShape.HasPhysicalShape) + { + if (IsStatic) + { + PhysScene.PE.SetGravity(PhysBody, PhysScene.DefaultGravity); + Inertia = OMV.Vector3.Zero; + PhysScene.PE.SetMassProps(PhysBody, 0f, Inertia); + PhysScene.PE.UpdateInertiaTensor(PhysBody); + } + else + { + if (inWorld) + { + // Changing interesting properties doesn't change proxy and collision cache + // information. The Bullet solution is to re-add the object to the world + // after parameters are changed. + PhysScene.PE.RemoveObjectFromWorld(PhysScene.World, PhysBody); + } + + // The computation of mass props requires gravity to be set on the object. + Gravity = ComputeGravity(Buoyancy); + PhysScene.PE.SetGravity(PhysBody, Gravity); + + // OMV.Vector3 currentScale = PhysScene.PE.GetLocalScaling(PhysShape.physShapeInfo); // DEBUG DEBUG + // DetailLog("{0},BSPrim.UpdateMassProperties,currentScale{1},shape={2}", LocalID, currentScale, PhysShape.physShapeInfo); // DEBUG DEBUG + + Inertia = PhysScene.PE.CalculateLocalInertia(PhysShape.physShapeInfo, physMass); + PhysScene.PE.SetMassProps(PhysBody, physMass, Inertia); + PhysScene.PE.UpdateInertiaTensor(PhysBody); + + DetailLog("{0},BSPrim.UpdateMassProperties,mass={1},localInertia={2},grav={3},inWorld={4}", + LocalID, physMass, Inertia, Gravity, inWorld); + + if (inWorld) + { + AddObjectToPhysicalWorld(); + } + } + } + } + + // Return what gravity should be set to this very moment + public OMV.Vector3 ComputeGravity(float buoyancy) + { + OMV.Vector3 ret = PhysScene.DefaultGravity; + + if (!IsStatic) + { + ret *= (1f - buoyancy); + ret *= GravModifier; + } + + return ret; + } + + // Is this used? + public override OMV.Vector3 CenterOfMass + { + get { return RawPosition; } + } + + // Is this used? + public override OMV.Vector3 GeometricCenter + { + get { return RawPosition; } + } + + public override OMV.Vector3 Force { + get { return RawForce; } + set { + RawForce = value; + EnableActor(RawForce != OMV.Vector3.Zero, SetForceActorName, delegate() + { + return new BSActorSetForce(PhysScene, this, SetForceActorName); + }); + + // Call update so actor Refresh() is called to start things off + PhysScene.TaintedObject(LocalID, "BSPrim.setForce", delegate() + { + UpdatePhysicalParameters(); + }); + } + } + + // Find and return a handle to the current vehicle actor. + // Return 'null' if there is no vehicle actor. + public BSDynamics GetVehicleActor(bool createIfNone) + { + BSDynamics ret = null; + BSActor actor; + if (PhysicalActors.TryGetActor(VehicleActorName, out actor)) + { + ret = actor as BSDynamics; + } + else + { + if (createIfNone) + { + ret = new BSDynamics(PhysScene, this, VehicleActorName); + PhysicalActors.Add(ret.ActorName, ret); + } + } + return ret; + } + + public override int VehicleType { + get { + int ret = (int)Vehicle.TYPE_NONE; + BSDynamics vehicleActor = GetVehicleActor(false /* createIfNone */); + if (vehicleActor != null) + ret = (int)vehicleActor.Type; + return ret; + } + set { + Vehicle type = (Vehicle)value; + + PhysScene.TaintedObject(LocalID, "setVehicleType", delegate() + { + // Some vehicle scripts change vehicle type on the fly as an easy way to + // change all the parameters. Like a plane changing to CAR when on the + // ground. In this case, don't want to zero motion. + // ZeroMotion(true /* inTaintTime */); + if (type == Vehicle.TYPE_NONE) + { + // Vehicle type is 'none' so get rid of any actor that may have been allocated. + BSDynamics vehicleActor = GetVehicleActor(false /* createIfNone */); + if (vehicleActor != null) + { + PhysicalActors.RemoveAndRelease(vehicleActor.ActorName); + } + } + else + { + // Vehicle type is not 'none' so create an actor and set it running. + BSDynamics vehicleActor = GetVehicleActor(true /* createIfNone */); + if (vehicleActor != null) + { + vehicleActor.ProcessTypeChange(type); + ActivateIfPhysical(false); + } + } + }); + } + } + public override void VehicleFloatParam(int param, float value) + { + PhysScene.TaintedObject(LocalID, "BSPrim.VehicleFloatParam", delegate() + { + BSDynamics vehicleActor = GetVehicleActor(true /* createIfNone */); + if (vehicleActor != null) + { + vehicleActor.ProcessFloatVehicleParam((Vehicle)param, value); + ActivateIfPhysical(false); + } + }); + } + public override void VehicleVectorParam(int param, OMV.Vector3 value) + { + PhysScene.TaintedObject(LocalID, "BSPrim.VehicleVectorParam", delegate() + { + BSDynamics vehicleActor = GetVehicleActor(true /* createIfNone */); + if (vehicleActor != null) + { + vehicleActor.ProcessVectorVehicleParam((Vehicle)param, value); + ActivateIfPhysical(false); + } + }); + } + public override void VehicleRotationParam(int param, OMV.Quaternion rotation) + { + PhysScene.TaintedObject(LocalID, "BSPrim.VehicleRotationParam", delegate() + { + BSDynamics vehicleActor = GetVehicleActor(true /* createIfNone */); + if (vehicleActor != null) + { + vehicleActor.ProcessRotationVehicleParam((Vehicle)param, rotation); + ActivateIfPhysical(false); + } + }); + } + public override void VehicleFlags(int param, bool remove) + { + PhysScene.TaintedObject(LocalID, "BSPrim.VehicleFlags", delegate() + { + BSDynamics vehicleActor = GetVehicleActor(true /* createIfNone */); + if (vehicleActor != null) + { + vehicleActor.ProcessVehicleFlags(param, remove); + } + }); + } + + // Allows the detection of collisions with inherently non-physical prims. see llVolumeDetect for more + public override void SetVolumeDetect(int param) { + bool newValue = (param != 0); + if (_isVolumeDetect != newValue) + { + _isVolumeDetect = newValue; + PhysScene.TaintedObject(LocalID, "BSPrim.SetVolumeDetect", delegate() + { + // DetailLog("{0},setVolumeDetect,taint,volDetect={1}", LocalID, _isVolumeDetect); + SetObjectDynamic(true); + }); + } + return; + } + public override bool IsVolumeDetect + { + get { return _isVolumeDetect; } + } + public override void SetMaterial(int material) + { + base.SetMaterial(material); + PhysScene.TaintedObject(LocalID, "BSPrim.SetMaterial", delegate() + { + UpdatePhysicalParameters(); + }); + } + public override float Friction + { + get { return base.Friction; } + set + { + if (base.Friction != value) + { + base.Friction = value; + PhysScene.TaintedObject(LocalID, "BSPrim.setFriction", delegate() + { + UpdatePhysicalParameters(); + }); + } + } + } + public override float Restitution + { + get { return base.Restitution; } + set + { + if (base.Restitution != value) + { + base.Restitution = value; + PhysScene.TaintedObject(LocalID, "BSPrim.setRestitution", delegate() + { + UpdatePhysicalParameters(); + }); + } + } + } + // The simulator/viewer keep density as 100kg/m3. + // Remember to use BSParam.DensityScaleFactor to create the physical density. + public override float Density + { + get { return base.Density; } + set + { + if (base.Density != value) + { + base.Density = value; + PhysScene.TaintedObject(LocalID, "BSPrim.setDensity", delegate() + { + UpdatePhysicalParameters(); + }); + } + } + } + public override float GravModifier + { + get { return base.GravModifier; } + set + { + if (base.GravModifier != value) + { + base.GravModifier = value; + PhysScene.TaintedObject(LocalID, "BSPrim.setGravityModifier", delegate() + { + UpdatePhysicalParameters(); + }); + } + } + } + public override OMV.Vector3 Velocity { + get { return RawVelocity; } + set { + RawVelocity = value; + PhysScene.TaintedObject(LocalID, "BSPrim.setVelocity", delegate() + { + // DetailLog("{0},BSPrim.SetVelocity,taint,vel={1}", LocalID, RawVelocity); + ForceVelocity = RawVelocity; + }); + } + } + public override OMV.Vector3 ForceVelocity { + get { return RawVelocity; } + set { + PhysScene.AssertInTaintTime("BSPrim.ForceVelocity"); + + RawVelocity = Util.ClampV(value, BSParam.MaxLinearVelocity); + if (PhysBody.HasPhysicalBody) + { + DetailLog("{0},BSPrim.ForceVelocity,taint,vel={1}", LocalID, RawVelocity); + PhysScene.PE.SetLinearVelocity(PhysBody, RawVelocity); + ActivateIfPhysical(false); + } + } + } + public override OMV.Vector3 Torque { + get { return RawTorque; } + set { + RawTorque = value; + EnableActor(RawTorque != OMV.Vector3.Zero, SetTorqueActorName, delegate() + { + return new BSActorSetTorque(PhysScene, this, SetTorqueActorName); + }); + DetailLog("{0},BSPrim.SetTorque,call,torque={1}", LocalID, RawTorque); + + // Call update so actor Refresh() is called to start things off + PhysScene.TaintedObject(LocalID, "BSPrim.setTorque", delegate() + { + UpdatePhysicalParameters(); + }); + } + } + public override OMV.Vector3 Acceleration { + get { return _acceleration; } + set { _acceleration = value; } + } + + public override OMV.Quaternion Orientation { + get { + return RawOrientation; + } + set { + if (RawOrientation == value) + return; + RawOrientation = value; + + PhysScene.TaintedObject(LocalID, "BSPrim.setOrientation", delegate() + { + ForceOrientation = RawOrientation; + }); + } + } + // Go directly to Bullet to get/set the value. + public override OMV.Quaternion ForceOrientation + { + get + { + RawOrientation = PhysScene.PE.GetOrientation(PhysBody); + return RawOrientation; + } + set + { + RawOrientation = value; + if (PhysBody.HasPhysicalBody) + PhysScene.PE.SetTranslation(PhysBody, RawPosition, RawOrientation); + } + } + public override int PhysicsActorType { + get { return _physicsActorType; } + set { _physicsActorType = value; } + } + public override bool IsPhysical { + get { return _isPhysical; } + set { + if (_isPhysical != value) + { + _isPhysical = value; + PhysScene.TaintedObject(LocalID, "BSPrim.setIsPhysical", delegate() + { + DetailLog("{0},setIsPhysical,taint,isPhys={1}", LocalID, _isPhysical); + SetObjectDynamic(true); + // whether phys-to-static or static-to-phys, the object is not moving. + ZeroMotion(true); + + }); + } + } + } + + // An object is static (does not move) if selected or not physical + public override bool IsStatic + { + get { return _isSelected || !IsPhysical; } + } + + // An object is solid if it's not phantom and if it's not doing VolumeDetect + public override bool IsSolid + { + get { return !IsPhantom && !_isVolumeDetect; } + } + + // The object is moving and is actively being dynamic in the physical world + public override bool IsPhysicallyActive + { + get { return !_isSelected && IsPhysical; } + } + + // Make gravity work if the object is physical and not selected + // Called at taint-time!! + private void SetObjectDynamic(bool forceRebuild) + { + // Recreate the physical object if necessary + CreateGeomAndObject(forceRebuild); + } + + // Convert the simulator's physical properties into settings on BulletSim objects. + // There are four flags we're interested in: + // IsStatic: Object does not move, otherwise the object has mass and moves + // isSolid: other objects bounce off of this object + // isVolumeDetect: other objects pass through but can generate collisions + // collisionEvents: whether this object returns collision events + // NOTE: overloaded by BSPrimLinkable to also update linkset physical parameters. + public virtual void UpdatePhysicalParameters() + { + if (!PhysBody.HasPhysicalBody) + { + // This would only happen if updates are called for during initialization when the body is not set up yet. + // DetailLog("{0},BSPrim.UpdatePhysicalParameters,taint,calledWithNoPhysBody", LocalID); + return; + } + + // Mangling all the physical properties requires the object not be in the physical world. + // This is a NOOP if the object is not in the world (BulletSim and Bullet ignore objects not found). + PhysScene.PE.RemoveObjectFromWorld(PhysScene.World, PhysBody); + + // Set up the object physicalness (does gravity and collisions move this object) + MakeDynamic(IsStatic); + + // Update vehicle specific parameters (after MakeDynamic() so can change physical parameters) + PhysicalActors.Refresh(); + + // Arrange for collision events if the simulator wants them + EnableCollisions(SubscribedEvents()); + + // Make solid or not (do things bounce off or pass through this object). + MakeSolid(IsSolid); + + AddObjectToPhysicalWorld(); + + // Rebuild its shape + PhysScene.PE.UpdateSingleAabb(PhysScene.World, PhysBody); + + DetailLog("{0},BSPrim.UpdatePhysicalParameters,taintExit,static={1},solid={2},mass={3},collide={4},cf={5:X},cType={6},body={7},shape={8}", + LocalID, IsStatic, IsSolid, Mass, SubscribedEvents(), + CurrentCollisionFlags, PhysBody.collisionType, PhysBody, PhysShape); + } + + // "Making dynamic" means changing to and from static. + // When static, gravity does not effect the object and it is fixed in space. + // When dynamic, the object can fall and be pushed by others. + // This is independent of its 'solidness' which controls what passes through + // this object and what interacts with it. + protected virtual void MakeDynamic(bool makeStatic) + { + if (makeStatic) + { + // Become a Bullet 'static' object type + CurrentCollisionFlags = PhysScene.PE.AddToCollisionFlags(PhysBody, CollisionFlags.CF_STATIC_OBJECT); + // Stop all movement + ZeroMotion(true); + + // Set various physical properties so other object interact properly + PhysScene.PE.SetFriction(PhysBody, Friction); + PhysScene.PE.SetRestitution(PhysBody, Restitution); + PhysScene.PE.SetContactProcessingThreshold(PhysBody, BSParam.ContactProcessingThreshold); + + // Mass is zero which disables a bunch of physics stuff in Bullet + UpdatePhysicalMassProperties(0f, false); + // Set collision detection parameters + if (BSParam.CcdMotionThreshold > 0f) + { + PhysScene.PE.SetCcdMotionThreshold(PhysBody, BSParam.CcdMotionThreshold); + PhysScene.PE.SetCcdSweptSphereRadius(PhysBody, BSParam.CcdSweptSphereRadius); + } + + // The activation state is 'disabled' so Bullet will not try to act on it. + // PhysicsScene.PE.ForceActivationState(PhysBody, ActivationState.DISABLE_SIMULATION); + // Start it out sleeping and physical actions could wake it up. + PhysScene.PE.ForceActivationState(PhysBody, ActivationState.ISLAND_SLEEPING); + + // This collides like a static object + PhysBody.collisionType = CollisionType.Static; + } + else + { + // Not a Bullet static object + CurrentCollisionFlags = PhysScene.PE.RemoveFromCollisionFlags(PhysBody, CollisionFlags.CF_STATIC_OBJECT); + + // Set various physical properties so other object interact properly + PhysScene.PE.SetFriction(PhysBody, Friction); + PhysScene.PE.SetRestitution(PhysBody, Restitution); + // DetailLog("{0},BSPrim.MakeDynamic,frict={1},rest={2}", LocalID, Friction, Restitution); + + // per http://www.bulletphysics.org/Bullet/phpBB3/viewtopic.php?t=3382 + // Since this can be called multiple times, only zero forces when becoming physical + // PhysicsScene.PE.ClearAllForces(BSBody); + + // For good measure, make sure the transform is set through to the motion state + ForcePosition = RawPosition; + ForceVelocity = RawVelocity; + ForceRotationalVelocity = _rotationalVelocity; + + // A dynamic object has mass + UpdatePhysicalMassProperties(RawMass, false); + + // Set collision detection parameters + if (BSParam.CcdMotionThreshold > 0f) + { + PhysScene.PE.SetCcdMotionThreshold(PhysBody, BSParam.CcdMotionThreshold); + PhysScene.PE.SetCcdSweptSphereRadius(PhysBody, BSParam.CcdSweptSphereRadius); + } + + // Various values for simulation limits + PhysScene.PE.SetDamping(PhysBody, BSParam.LinearDamping, BSParam.AngularDamping); + PhysScene.PE.SetDeactivationTime(PhysBody, BSParam.DeactivationTime); + PhysScene.PE.SetSleepingThresholds(PhysBody, BSParam.LinearSleepingThreshold, BSParam.AngularSleepingThreshold); + PhysScene.PE.SetContactProcessingThreshold(PhysBody, BSParam.ContactProcessingThreshold); + + // This collides like an object. + PhysBody.collisionType = CollisionType.Dynamic; + + // Force activation of the object so Bullet will act on it. + // Must do the ForceActivationState2() to overcome the DISABLE_SIMULATION from static objects. + PhysScene.PE.ForceActivationState(PhysBody, ActivationState.ACTIVE_TAG); + } + } + + // "Making solid" means that other object will not pass through this object. + // To make transparent, we create a Bullet ghost object. + // Note: This expects to be called from the UpdatePhysicalParameters() routine as + // the functions after this one set up the state of a possibly newly created collision body. + private void MakeSolid(bool makeSolid) + { + CollisionObjectTypes bodyType = (CollisionObjectTypes)PhysScene.PE.GetBodyType(PhysBody); + if (makeSolid) + { + // Verify the previous code created the correct shape for this type of thing. + if ((bodyType & CollisionObjectTypes.CO_RIGID_BODY) == 0) + { + m_log.ErrorFormat("{0} MakeSolid: physical body of wrong type for solidity. id={1}, type={2}", LogHeader, LocalID, bodyType); + } + CurrentCollisionFlags = PhysScene.PE.RemoveFromCollisionFlags(PhysBody, CollisionFlags.CF_NO_CONTACT_RESPONSE); + } + else + { + if ((bodyType & CollisionObjectTypes.CO_GHOST_OBJECT) == 0) + { + m_log.ErrorFormat("{0} MakeSolid: physical body of wrong type for non-solidness. id={1}, type={2}", LogHeader, LocalID, bodyType); + } + CurrentCollisionFlags = PhysScene.PE.AddToCollisionFlags(PhysBody, CollisionFlags.CF_NO_CONTACT_RESPONSE); + + // Change collision info from a static object to a ghosty collision object + PhysBody.collisionType = CollisionType.VolumeDetect; + } + } + + // Turn on or off the flag controlling whether collision events are returned to the simulator. + private void EnableCollisions(bool wantsCollisionEvents) + { + if (wantsCollisionEvents) + { + CurrentCollisionFlags = PhysScene.PE.AddToCollisionFlags(PhysBody, CollisionFlags.BS_SUBSCRIBE_COLLISION_EVENTS); + } + else + { + CurrentCollisionFlags = PhysScene.PE.RemoveFromCollisionFlags(PhysBody, CollisionFlags.BS_SUBSCRIBE_COLLISION_EVENTS); + } + } + + // Add me to the physical world. + // Object MUST NOT already be in the world. + // This routine exists because some assorted properties get mangled by adding to the world. + internal void AddObjectToPhysicalWorld() + { + if (PhysBody.HasPhysicalBody) + { + PhysScene.PE.AddObjectToWorld(PhysScene.World, PhysBody); + } + else + { + m_log.ErrorFormat("{0} Attempt to add physical object without body. id={1}", LogHeader, LocalID); + DetailLog("{0},BSPrim.AddObjectToPhysicalWorld,addObjectWithoutBody,cType={1}", LocalID, PhysBody.collisionType); + } + } + + // prims don't fly + public override bool Flying { + get { return _flying; } + set { + _flying = value; + } + } + public override bool SetAlwaysRun { + get { return _setAlwaysRun; } + set { _setAlwaysRun = value; } + } + public override bool ThrottleUpdates { + get { return _throttleUpdates; } + set { _throttleUpdates = value; } + } + public bool IsPhantom { + get { + // SceneObjectPart removes phantom objects from the physics scene + // so, although we could implement touching and such, we never + // are invoked as a phantom object + return false; + } + } + public override bool FloatOnWater { + set { + _floatOnWater = value; + PhysScene.TaintedObject(LocalID, "BSPrim.setFloatOnWater", delegate() + { + if (_floatOnWater) + CurrentCollisionFlags = PhysScene.PE.AddToCollisionFlags(PhysBody, CollisionFlags.BS_FLOATS_ON_WATER); + else + CurrentCollisionFlags = PhysScene.PE.RemoveFromCollisionFlags(PhysBody, CollisionFlags.BS_FLOATS_ON_WATER); + }); + } + } + public override OMV.Vector3 RotationalVelocity { + get { + return _rotationalVelocity; + } + set { + _rotationalVelocity = value; + Util.ClampV(_rotationalVelocity, BSParam.MaxAngularVelocity); + // m_log.DebugFormat("{0}: RotationalVelocity={1}", LogHeader, _rotationalVelocity); + PhysScene.TaintedObject(LocalID, "BSPrim.setRotationalVelocity", delegate() + { + ForceRotationalVelocity = _rotationalVelocity; + }); + } + } + public override OMV.Vector3 ForceRotationalVelocity { + get { + return _rotationalVelocity; + } + set { + _rotationalVelocity = Util.ClampV(value, BSParam.MaxAngularVelocity); + if (PhysBody.HasPhysicalBody) + { + DetailLog("{0},BSPrim.ForceRotationalVel,taint,rotvel={1}", LocalID, _rotationalVelocity); + PhysScene.PE.SetAngularVelocity(PhysBody, _rotationalVelocity); + // PhysicsScene.PE.SetInterpolationAngularVelocity(PhysBody, _rotationalVelocity); + ActivateIfPhysical(false); + } + } + } + public override bool Kinematic { + get { return _kinematic; } + set { _kinematic = value; + // m_log.DebugFormat("{0}: Kinematic={1}", LogHeader, _kinematic); + } + } + public override float Buoyancy { + get { return _buoyancy; } + set { + _buoyancy = value; + PhysScene.TaintedObject(LocalID, "BSPrim.setBuoyancy", delegate() + { + ForceBuoyancy = _buoyancy; + }); + } + } + public override float ForceBuoyancy { + get { return _buoyancy; } + set { + _buoyancy = value; + // DetailLog("{0},BSPrim.setForceBuoyancy,taint,buoy={1}", LocalID, _buoyancy); + // Force the recalculation of the various inertia,etc variables in the object + UpdatePhysicalMassProperties(RawMass, true); + DetailLog("{0},BSPrim.ForceBuoyancy,buoy={1},mass={2},grav={3}", LocalID, _buoyancy, RawMass, Gravity); + ActivateIfPhysical(false); + } + } + + public override bool PIDActive + { + get + { + return MoveToTargetActive; + } + + set + { + MoveToTargetActive = value; + + EnableActor(MoveToTargetActive, MoveToTargetActorName, delegate() + { + return new BSActorMoveToTarget(PhysScene, this, MoveToTargetActorName); + }); + + // Call update so actor Refresh() is called to start things off + PhysScene.TaintedObject(LocalID, "BSPrim.PIDActive", delegate() + { + UpdatePhysicalParameters(); + }); + } + } + + public override OMV.Vector3 PIDTarget + { + set + { + base.PIDTarget = value; + BSActor actor; + if (PhysicalActors.TryGetActor(MoveToTargetActorName, out actor)) + { + // if the actor exists, tell it to refresh its values. + actor.Refresh(); + } + + } + } + // Used for llSetHoverHeight and maybe vehicle height + // Hover Height will override MoveTo target's Z + public override bool PIDHoverActive { + set { + base.HoverActive = value; + EnableActor(HoverActive, HoverActorName, delegate() + { + return new BSActorHover(PhysScene, this, HoverActorName); + }); + + // Call update so actor Refresh() is called to start things off + PhysScene.TaintedObject(LocalID, "BSPrim.PIDHoverActive", delegate() + { + UpdatePhysicalParameters(); + }); + } + } + + public override void AddForce(OMV.Vector3 force, bool pushforce) { + // Per documentation, max force is limited. + OMV.Vector3 addForce = Util.ClampV(force, BSParam.MaxAddForceMagnitude); + + // Since this force is being applied in only one step, make this a force per second. + addForce /= PhysScene.LastTimeStep; + AddForce(addForce, pushforce, false /* inTaintTime */); + } + + // Applying a force just adds this to the total force on the object. + // This added force will only last the next simulation tick. + public override void AddForce(OMV.Vector3 force, bool pushforce, bool inTaintTime) { + // for an object, doesn't matter if force is a pushforce or not + if (IsPhysicallyActive) + { + if (force.IsFinite()) + { + // DetailLog("{0},BSPrim.addForce,call,force={1}", LocalID, addForce); + + OMV.Vector3 addForce = force; + PhysScene.TaintedObject(inTaintTime, LocalID, "BSPrim.AddForce", delegate() + { + // Bullet adds this central force to the total force for this tick. + // Deep down in Bullet: + // linearVelocity += totalForce / mass * timeStep; + DetailLog("{0},BSPrim.addForce,taint,force={1}", LocalID, addForce); + if (PhysBody.HasPhysicalBody) + { + PhysScene.PE.ApplyCentralForce(PhysBody, addForce); + ActivateIfPhysical(false); + } + }); + } + else + { + m_log.WarnFormat("{0}: AddForce: Got a NaN force applied to a prim. LocalID={1}", LogHeader, LocalID); + return; + } + } + } + + public void AddForceImpulse(OMV.Vector3 impulse, bool pushforce, bool inTaintTime) { + // for an object, doesn't matter if force is a pushforce or not + if (!IsPhysicallyActive) + { + if (impulse.IsFinite()) + { + OMV.Vector3 addImpulse = Util.ClampV(impulse, BSParam.MaxAddForceMagnitude); + // DetailLog("{0},BSPrim.addForceImpulse,call,impulse={1}", LocalID, impulse); + + PhysScene.TaintedObject(inTaintTime, LocalID, "BSPrim.AddImpulse", delegate() + { + // Bullet adds this impulse immediately to the velocity + DetailLog("{0},BSPrim.addForceImpulse,taint,impulseforce={1}", LocalID, addImpulse); + if (PhysBody.HasPhysicalBody) + { + PhysScene.PE.ApplyCentralImpulse(PhysBody, addImpulse); + ActivateIfPhysical(false); + } + }); + } + else + { + m_log.WarnFormat("{0}: AddForceImpulse: Got a NaN impulse applied to a prim. LocalID={1}", LogHeader, LocalID); + return; + } + } + } + + // BSPhysObject.AddAngularForce() + public override void AddAngularForce(OMV.Vector3 force, bool pushforce, bool inTaintTime) + { + if (force.IsFinite()) + { + OMV.Vector3 angForce = force; + PhysScene.TaintedObject(inTaintTime, LocalID, "BSPrim.AddAngularForce", delegate() + { + if (PhysBody.HasPhysicalBody) + { + DetailLog("{0},BSPrim.AddAngularForce,taint,angForce={1}", LocalID, angForce); + PhysScene.PE.ApplyTorque(PhysBody, angForce); + ActivateIfPhysical(false); + } + }); + } + else + { + m_log.WarnFormat("{0}: Got a NaN force applied to a prim. LocalID={1}", LogHeader, LocalID); + return; + } + } + + // A torque impulse. + // ApplyTorqueImpulse adds torque directly to the angularVelocity. + // AddAngularForce accumulates the force and applied it to the angular velocity all at once. + // Computed as: angularVelocity += impulse * inertia; + public void ApplyTorqueImpulse(OMV.Vector3 impulse, bool inTaintTime) + { + OMV.Vector3 applyImpulse = impulse; + PhysScene.TaintedObject(inTaintTime, LocalID, "BSPrim.ApplyTorqueImpulse", delegate() + { + if (PhysBody.HasPhysicalBody) + { + PhysScene.PE.ApplyTorqueImpulse(PhysBody, applyImpulse); + ActivateIfPhysical(false); + } + }); + } + + public override void SetMomentum(OMV.Vector3 momentum) { + // DetailLog("{0},BSPrim.SetMomentum,call,mom={1}", LocalID, momentum); + } + #region Mass Calculation + + private float CalculateMass() + { + float volume = _size.X * _size.Y * _size.Z; // default + float tmp; + + float returnMass = 0; + float hollowAmount = (float)BaseShape.ProfileHollow * 2.0e-5f; + float hollowVolume = hollowAmount * hollowAmount; + + switch (BaseShape.ProfileShape) + { + case ProfileShape.Square: + // default box + + if (BaseShape.PathCurve == (byte)Extrusion.Straight) + { + if (hollowAmount > 0.0) + { + switch (BaseShape.HollowShape) + { + case HollowShape.Square: + case HollowShape.Same: + break; + + case HollowShape.Circle: + + hollowVolume *= 0.78539816339f; + break; + + case HollowShape.Triangle: + + hollowVolume *= (0.5f * .5f); + break; + + default: + hollowVolume = 0; + break; + } + volume *= (1.0f - hollowVolume); + } + } + + else if (BaseShape.PathCurve == (byte)Extrusion.Curve1) + { + //a tube + + volume *= 0.78539816339e-2f * (float)(200 - BaseShape.PathScaleX); + tmp= 1.0f -2.0e-2f * (float)(200 - BaseShape.PathScaleY); + volume -= volume*tmp*tmp; + + if (hollowAmount > 0.0) + { + hollowVolume *= hollowAmount; + + switch (BaseShape.HollowShape) + { + case HollowShape.Square: + case HollowShape.Same: + break; + + case HollowShape.Circle: + hollowVolume *= 0.78539816339f;; + break; + + case HollowShape.Triangle: + hollowVolume *= 0.5f * 0.5f; + break; + default: + hollowVolume = 0; + break; + } + volume *= (1.0f - hollowVolume); + } + } + + break; + + case ProfileShape.Circle: + + if (BaseShape.PathCurve == (byte)Extrusion.Straight) + { + volume *= 0.78539816339f; // elipse base + + if (hollowAmount > 0.0) + { + switch (BaseShape.HollowShape) + { + case HollowShape.Same: + case HollowShape.Circle: + break; + + case HollowShape.Square: + hollowVolume *= 0.5f * 2.5984480504799f; + break; + + case HollowShape.Triangle: + hollowVolume *= .5f * 1.27323954473516f; + break; + + default: + hollowVolume = 0; + break; + } + volume *= (1.0f - hollowVolume); + } + } + + else if (BaseShape.PathCurve == (byte)Extrusion.Curve1) + { + volume *= 0.61685027506808491367715568749226e-2f * (float)(200 - BaseShape.PathScaleX); + tmp = 1.0f - .02f * (float)(200 - BaseShape.PathScaleY); + volume *= (1.0f - tmp * tmp); + + if (hollowAmount > 0.0) + { + + // calculate the hollow volume by it's shape compared to the prim shape + hollowVolume *= hollowAmount; + + switch (BaseShape.HollowShape) + { + case HollowShape.Same: + case HollowShape.Circle: + break; + + case HollowShape.Square: + hollowVolume *= 0.5f * 2.5984480504799f; + break; + + case HollowShape.Triangle: + hollowVolume *= .5f * 1.27323954473516f; + break; + + default: + hollowVolume = 0; + break; + } + volume *= (1.0f - hollowVolume); + } + } + break; + + case ProfileShape.HalfCircle: + if (BaseShape.PathCurve == (byte)Extrusion.Curve1) + { + volume *= 0.52359877559829887307710723054658f; + } + break; + + case ProfileShape.EquilateralTriangle: + + if (BaseShape.PathCurve == (byte)Extrusion.Straight) + { + volume *= 0.32475953f; + + if (hollowAmount > 0.0) + { + + // calculate the hollow volume by it's shape compared to the prim shape + switch (BaseShape.HollowShape) + { + case HollowShape.Same: + case HollowShape.Triangle: + hollowVolume *= .25f; + break; + + case HollowShape.Square: + hollowVolume *= 0.499849f * 3.07920140172638f; + break; + + case HollowShape.Circle: + // Hollow shape is a perfect cyllinder in respect to the cube's scale + // Cyllinder hollow volume calculation + + hollowVolume *= 0.1963495f * 3.07920140172638f; + break; + + default: + hollowVolume = 0; + break; + } + volume *= (1.0f - hollowVolume); + } + } + else if (BaseShape.PathCurve == (byte)Extrusion.Curve1) + { + volume *= 0.32475953f; + volume *= 0.01f * (float)(200 - BaseShape.PathScaleX); + tmp = 1.0f - .02f * (float)(200 - BaseShape.PathScaleY); + volume *= (1.0f - tmp * tmp); + + if (hollowAmount > 0.0) + { + + hollowVolume *= hollowAmount; + + switch (BaseShape.HollowShape) + { + case HollowShape.Same: + case HollowShape.Triangle: + hollowVolume *= .25f; + break; + + case HollowShape.Square: + hollowVolume *= 0.499849f * 3.07920140172638f; + break; + + case HollowShape.Circle: + + hollowVolume *= 0.1963495f * 3.07920140172638f; + break; + + default: + hollowVolume = 0; + break; + } + volume *= (1.0f - hollowVolume); + } + } + break; + + default: + break; + } + + + + float taperX1; + float taperY1; + float taperX; + float taperY; + float pathBegin; + float pathEnd; + float profileBegin; + float profileEnd; + + if (BaseShape.PathCurve == (byte)Extrusion.Straight || BaseShape.PathCurve == (byte)Extrusion.Flexible) + { + taperX1 = BaseShape.PathScaleX * 0.01f; + if (taperX1 > 1.0f) + taperX1 = 2.0f - taperX1; + taperX = 1.0f - taperX1; + + taperY1 = BaseShape.PathScaleY * 0.01f; + if (taperY1 > 1.0f) + taperY1 = 2.0f - taperY1; + taperY = 1.0f - taperY1; + } + else + { + taperX = BaseShape.PathTaperX * 0.01f; + if (taperX < 0.0f) + taperX = -taperX; + taperX1 = 1.0f - taperX; + + taperY = BaseShape.PathTaperY * 0.01f; + if (taperY < 0.0f) + taperY = -taperY; + taperY1 = 1.0f - taperY; + + } + + + volume *= (taperX1 * taperY1 + 0.5f * (taperX1 * taperY + taperX * taperY1) + 0.3333333333f * taperX * taperY); + + pathBegin = (float)BaseShape.PathBegin * 2.0e-5f; + pathEnd = 1.0f - (float)BaseShape.PathEnd * 2.0e-5f; + volume *= (pathEnd - pathBegin); + + // this is crude aproximation + profileBegin = (float)BaseShape.ProfileBegin * 2.0e-5f; + profileEnd = 1.0f - (float)BaseShape.ProfileEnd * 2.0e-5f; + volume *= (profileEnd - profileBegin); + + returnMass = Density * BSParam.DensityScaleFactor * volume; + + returnMass = Util.Clamp(returnMass, BSParam.MinimumObjectMass, BSParam.MaximumObjectMass); + // DetailLog("{0},BSPrim.CalculateMass,den={1},vol={2},mass={3}", LocalID, Density, volume, returnMass); + DetailLog("{0},BSPrim.CalculateMass,den={1},vol={2},mass={3},pathB={4},pathE={5},profB={6},profE={7},siz={8}", + LocalID, Density, volume, returnMass, pathBegin, pathEnd, profileBegin, profileEnd, _size); + + return returnMass; + }// end CalculateMass + #endregion Mass Calculation + + // Rebuild the geometry and object. + // This is called when the shape changes so we need to recreate the mesh/hull. + // Called at taint-time!!! + public void CreateGeomAndObject(bool forceRebuild) + { + // Create the correct physical representation for this type of object. + // Updates base.PhysBody and base.PhysShape with the new information. + // Ignore 'forceRebuild'. 'GetBodyAndShape' makes the right choices and changes of necessary. + PhysScene.Shapes.GetBodyAndShape(false /*forceRebuild */, PhysScene.World, this, delegate(BulletBody pBody, BulletShape pShape) + { + // Called if the current prim body is about to be destroyed. + // Remove all the physical dependencies on the old body. + // (Maybe someday make the changing of BSShape an event to be subscribed to by BSLinkset, ...) + // Note: this virtual function is overloaded by BSPrimLinkable to remove linkset constraints. + RemoveDependencies(); + }); + + // Make sure the properties are set on the new object + UpdatePhysicalParameters(); + return; + } + + // Called at taint-time + protected virtual void RemoveDependencies() + { + PhysicalActors.RemoveDependencies(); + } + + #region Extension + public override object Extension(string pFunct, params object[] pParams) + { + DetailLog("{0} BSPrim.Extension,op={1}", LocalID, pFunct); + object ret = null; + switch (pFunct) + { + case ExtendedPhysics.PhysFunctAxisLockLimits: + ret = SetAxisLockLimitsExtension(pParams); + break; + default: + ret = base.Extension(pFunct, pParams); + break; + } + return ret; + } + + private void InitializeAxisActor() + { + EnableActor(LockedAngularAxis != LockedAxisFree || LockedLinearAxis != LockedAxisFree, + LockedAxisActorName, delegate() + { + return new BSActorLockAxis(PhysScene, this, LockedAxisActorName); + }); + + // Update parameters so the new actor's Refresh() action is called at the right time. + PhysScene.TaintedObject(LocalID, "BSPrim.LockAxis", delegate() + { + UpdatePhysicalParameters(); + }); + } + + // Passed an array of an array of parameters, set the axis locking. + // This expects an int (PHYS_AXIS_*) followed by none or two limit floats + // followed by another int and floats, etc. + private object SetAxisLockLimitsExtension(object[] pParams) + { + DetailLog("{0} SetAxisLockLimitsExtension. parmlen={1}", LocalID, pParams.GetLength(0)); + object ret = null; + try + { + if (pParams.GetLength(0) > 1) + { + int index = 2; + while (index < pParams.GetLength(0)) + { + var funct = pParams[index]; + DetailLog("{0} SetAxisLockLimitsExtension. op={1}, index={2}", LocalID, funct, index); + if (funct is Int32 || funct is Int64) + { + switch ((int)funct) + { + // Those that take no parameters + case ExtendedPhysics.PHYS_AXIS_LOCK_LINEAR: + case ExtendedPhysics.PHYS_AXIS_LOCK_LINEAR_X: + case ExtendedPhysics.PHYS_AXIS_LOCK_LINEAR_Y: + case ExtendedPhysics.PHYS_AXIS_LOCK_LINEAR_Z: + case ExtendedPhysics.PHYS_AXIS_LOCK_ANGULAR: + case ExtendedPhysics.PHYS_AXIS_LOCK_ANGULAR_X: + case ExtendedPhysics.PHYS_AXIS_LOCK_ANGULAR_Y: + case ExtendedPhysics.PHYS_AXIS_LOCK_ANGULAR_Z: + case ExtendedPhysics.PHYS_AXIS_UNLOCK_LINEAR: + case ExtendedPhysics.PHYS_AXIS_UNLOCK_LINEAR_X: + case ExtendedPhysics.PHYS_AXIS_UNLOCK_LINEAR_Y: + case ExtendedPhysics.PHYS_AXIS_UNLOCK_LINEAR_Z: + case ExtendedPhysics.PHYS_AXIS_UNLOCK_ANGULAR: + case ExtendedPhysics.PHYS_AXIS_UNLOCK_ANGULAR_X: + case ExtendedPhysics.PHYS_AXIS_UNLOCK_ANGULAR_Y: + case ExtendedPhysics.PHYS_AXIS_UNLOCK_ANGULAR_Z: + case ExtendedPhysics.PHYS_AXIS_UNLOCK: + ApplyAxisLimits((int)funct, 0f, 0f); + index += 1; + break; + // Those that take two parameters (the limits) + case ExtendedPhysics.PHYS_AXIS_LIMIT_LINEAR_X: + case ExtendedPhysics.PHYS_AXIS_LIMIT_LINEAR_Y: + case ExtendedPhysics.PHYS_AXIS_LIMIT_LINEAR_Z: + case ExtendedPhysics.PHYS_AXIS_LIMIT_ANGULAR_X: + case ExtendedPhysics.PHYS_AXIS_LIMIT_ANGULAR_Y: + case ExtendedPhysics.PHYS_AXIS_LIMIT_ANGULAR_Z: + ApplyAxisLimits((int)funct, (float)pParams[index + 1], (float)pParams[index + 2]); + index += 3; + break; + default: + m_log.WarnFormat("{0} SetSxisLockLimitsExtension. Unknown op={1}", LogHeader, funct); + index += 1; + break; + } + } + } + InitializeAxisActor(); + ret = (object)index; + } + } + catch (Exception e) + { + m_log.WarnFormat("{0} SetSxisLockLimitsExtension exception in object {1}: {2}", LogHeader, this.Name, e); + ret = null; + } + return ret; // not implemented yet + } + + // Set the locking parameters. + // If an axis is locked, the limits for the axis are set to zero, + // If the axis is being constrained, the high and low value are passed and set. + // When done here, LockedXXXAxis flags are set and LockedXXXAxixLow/High are set to the range. + protected void ApplyAxisLimits(int funct, float low, float high) + { + DetailLog("{0} ApplyAxisLimits. op={1}, low={2}, high={3}", LocalID, funct, low, high); + float linearMax = 23000f; + float angularMax = (float)Math.PI; + + switch (funct) + { + case ExtendedPhysics.PHYS_AXIS_LOCK_LINEAR: + this.LockedLinearAxis = new OMV.Vector3(LockedAxis, LockedAxis, LockedAxis); + this.LockedLinearAxisLow = OMV.Vector3.Zero; + this.LockedLinearAxisHigh = OMV.Vector3.Zero; + break; + case ExtendedPhysics.PHYS_AXIS_LOCK_LINEAR_X: + this.LockedLinearAxis.X = LockedAxis; + this.LockedLinearAxisLow.X = 0f; + this.LockedLinearAxisHigh.X = 0f; + break; + case ExtendedPhysics.PHYS_AXIS_LIMIT_LINEAR_X: + this.LockedLinearAxis.X = LockedAxis; + this.LockedLinearAxisLow.X = Util.Clip(low, -linearMax, linearMax); + this.LockedLinearAxisHigh.X = Util.Clip(high, -linearMax, linearMax); + break; + case ExtendedPhysics.PHYS_AXIS_LOCK_LINEAR_Y: + this.LockedLinearAxis.Y = LockedAxis; + this.LockedLinearAxisLow.Y = 0f; + this.LockedLinearAxisHigh.Y = 0f; + break; + case ExtendedPhysics.PHYS_AXIS_LIMIT_LINEAR_Y: + this.LockedLinearAxis.Y = LockedAxis; + this.LockedLinearAxisLow.Y = Util.Clip(low, -linearMax, linearMax); + this.LockedLinearAxisHigh.Y = Util.Clip(high, -linearMax, linearMax); + break; + case ExtendedPhysics.PHYS_AXIS_LOCK_LINEAR_Z: + this.LockedLinearAxis.Z = LockedAxis; + this.LockedLinearAxisLow.Z = 0f; + this.LockedLinearAxisHigh.Z = 0f; + break; + case ExtendedPhysics.PHYS_AXIS_LIMIT_LINEAR_Z: + this.LockedLinearAxis.Z = LockedAxis; + this.LockedLinearAxisLow.Z = Util.Clip(low, -linearMax, linearMax); + this.LockedLinearAxisHigh.Z = Util.Clip(high, -linearMax, linearMax); + break; + case ExtendedPhysics.PHYS_AXIS_LOCK_ANGULAR: + this.LockedAngularAxis = new OMV.Vector3(LockedAxis, LockedAxis, LockedAxis); + this.LockedAngularAxisLow = OMV.Vector3.Zero; + this.LockedAngularAxisHigh = OMV.Vector3.Zero; + break; + case ExtendedPhysics.PHYS_AXIS_LOCK_ANGULAR_X: + this.LockedAngularAxis.X = LockedAxis; + this.LockedAngularAxisLow.X = 0; + this.LockedAngularAxisHigh.X = 0; + break; + case ExtendedPhysics.PHYS_AXIS_LIMIT_ANGULAR_X: + this.LockedAngularAxis.X = LockedAxis; + this.LockedAngularAxisLow.X = Util.Clip(low, -angularMax, angularMax); + this.LockedAngularAxisHigh.X = Util.Clip(high, -angularMax, angularMax); + break; + case ExtendedPhysics.PHYS_AXIS_LOCK_ANGULAR_Y: + this.LockedAngularAxis.Y = LockedAxis; + this.LockedAngularAxisLow.Y = 0; + this.LockedAngularAxisHigh.Y = 0; + break; + case ExtendedPhysics.PHYS_AXIS_LIMIT_ANGULAR_Y: + this.LockedAngularAxis.Y = LockedAxis; + this.LockedAngularAxisLow.Y = Util.Clip(low, -angularMax, angularMax); + this.LockedAngularAxisHigh.Y = Util.Clip(high, -angularMax, angularMax); + break; + case ExtendedPhysics.PHYS_AXIS_LOCK_ANGULAR_Z: + this.LockedAngularAxis.Z = LockedAxis; + this.LockedAngularAxisLow.Z = 0; + this.LockedAngularAxisHigh.Z = 0; + break; + case ExtendedPhysics.PHYS_AXIS_LIMIT_ANGULAR_Z: + this.LockedAngularAxis.Z = LockedAxis; + this.LockedAngularAxisLow.Z = Util.Clip(low, -angularMax, angularMax); + this.LockedAngularAxisHigh.Z = Util.Clip(high, -angularMax, angularMax); + break; + case ExtendedPhysics.PHYS_AXIS_UNLOCK_LINEAR: + this.LockedLinearAxis = LockedAxisFree; + this.LockedLinearAxisLow = new OMV.Vector3(-linearMax, -linearMax, -linearMax); + this.LockedLinearAxisHigh = new OMV.Vector3(linearMax, linearMax, linearMax); + break; + case ExtendedPhysics.PHYS_AXIS_UNLOCK_LINEAR_X: + this.LockedLinearAxis.X = FreeAxis; + this.LockedLinearAxisLow.X = -linearMax; + this.LockedLinearAxisHigh.X = linearMax; + break; + case ExtendedPhysics.PHYS_AXIS_UNLOCK_LINEAR_Y: + this.LockedLinearAxis.Y = FreeAxis; + this.LockedLinearAxisLow.Y = -linearMax; + this.LockedLinearAxisHigh.Y = linearMax; + break; + case ExtendedPhysics.PHYS_AXIS_UNLOCK_LINEAR_Z: + this.LockedLinearAxis.Z = FreeAxis; + this.LockedLinearAxisLow.Z = -linearMax; + this.LockedLinearAxisHigh.Z = linearMax; + break; + case ExtendedPhysics.PHYS_AXIS_UNLOCK_ANGULAR: + this.LockedAngularAxis = LockedAxisFree; + this.LockedAngularAxisLow = new OMV.Vector3(-angularMax, -angularMax, -angularMax); + this.LockedAngularAxisHigh = new OMV.Vector3(angularMax, angularMax, angularMax); + break; + case ExtendedPhysics.PHYS_AXIS_UNLOCK_ANGULAR_X: + this.LockedAngularAxis.X = FreeAxis; + this.LockedAngularAxisLow.X = -angularMax; + this.LockedAngularAxisHigh.X = angularMax; + break; + case ExtendedPhysics.PHYS_AXIS_UNLOCK_ANGULAR_Y: + this.LockedAngularAxis.Y = FreeAxis; + this.LockedAngularAxisLow.Y = -angularMax; + this.LockedAngularAxisHigh.Y = angularMax; + break; + case ExtendedPhysics.PHYS_AXIS_UNLOCK_ANGULAR_Z: + this.LockedAngularAxis.Z = FreeAxis; + this.LockedAngularAxisLow.Z = -angularMax; + this.LockedAngularAxisHigh.Z = angularMax; + break; + case ExtendedPhysics.PHYS_AXIS_UNLOCK: + ApplyAxisLimits(ExtendedPhysics.PHYS_AXIS_UNLOCK_LINEAR, 0f, 0f); + ApplyAxisLimits(ExtendedPhysics.PHYS_AXIS_UNLOCK_ANGULAR, 0f, 0f); + break; + default: + break; + } + return; + } + #endregion // Extension + + // The physics engine says that properties have updated. Update same and inform + // the world that things have changed. + // NOTE: BSPrim.UpdateProperties is overloaded by BSPrimLinkable which modifies updates from root and children prims. + // NOTE: BSPrim.UpdateProperties is overloaded by BSPrimDisplaced which handles mapping physical position to simulator position. + public override void UpdateProperties(EntityProperties entprop) + { + // Let anyone (like the actors) modify the updated properties before they are pushed into the object and the simulator. + TriggerPreUpdatePropertyAction(ref entprop); + + // DetailLog("{0},BSPrim.UpdateProperties,entry,entprop={1}", LocalID, entprop); // DEBUG DEBUG + + // Assign directly to the local variables so the normal set actions do not happen + RawPosition = entprop.Position; + RawOrientation = entprop.Rotation; + // DEBUG DEBUG DEBUG -- smooth velocity changes a bit. The simulator seems to be + // very sensitive to velocity changes. + if (entprop.Velocity == OMV.Vector3.Zero || !entprop.Velocity.ApproxEquals(RawVelocity, BSParam.UpdateVelocityChangeThreshold)) + RawVelocity = entprop.Velocity; + _acceleration = entprop.Acceleration; + _rotationalVelocity = entprop.RotationalVelocity; + + // DetailLog("{0},BSPrim.UpdateProperties,afterAssign,entprop={1}", LocalID, entprop); // DEBUG DEBUG + + // The sanity check can change the velocity and/or position. + if (PositionSanityCheck(true /* inTaintTime */ )) + { + entprop.Position = RawPosition; + entprop.Velocity = RawVelocity; + entprop.RotationalVelocity = _rotationalVelocity; + entprop.Acceleration = _acceleration; + } + + OMV.Vector3 direction = OMV.Vector3.UnitX * RawOrientation; // DEBUG DEBUG DEBUG + DetailLog("{0},BSPrim.UpdateProperties,call,entProp={1},dir={2}", LocalID, entprop, direction); + + // remember the current and last set values + LastEntityProperties = CurrentEntityProperties; + CurrentEntityProperties = entprop; + + PhysScene.PostUpdate(this); + } +} +} -- cgit v1.1