From fe16dc09da3f2736fad5a9e792f5f81098b5f9a1 Mon Sep 17 00:00:00 2001 From: Robert Adams Date: Sun, 7 Apr 2013 08:27:49 -0700 Subject: BulletSim: complete movement of physical object action code out of the physical object and into actors for setForce, setTorque, hover, lock axis and avatar move. --- .../Physics/BulletSPlugin/BSActorAvatarMove.cs | 287 +++++++++++++++++++ .../Region/Physics/BulletSPlugin/BSActorHover.cs | 176 ++++++++++++ .../Physics/BulletSPlugin/BSActorLockAxis.cs | 4 +- .../Physics/BulletSPlugin/BSActorMoveToTarget.cs | 156 +++++++++++ .../Physics/BulletSPlugin/BSActorSetForce.cs | 137 +++++++++ .../Physics/BulletSPlugin/BSActorSetTorque.cs | 138 +++++++++ OpenSim/Region/Physics/BulletSPlugin/BSActors.cs | 12 +- .../Region/Physics/BulletSPlugin/BSCharacter.cs | 268 +++--------------- .../Region/Physics/BulletSPlugin/BSPhysObject.cs | 226 ++++++--------- OpenSim/Region/Physics/BulletSPlugin/BSPrim.cs | 307 ++++----------------- .../Region/Physics/BulletSPlugin/BulletSimTODO.txt | 3 +- 11 files changed, 1078 insertions(+), 636 deletions(-) create mode 100755 OpenSim/Region/Physics/BulletSPlugin/BSActorAvatarMove.cs create mode 100755 OpenSim/Region/Physics/BulletSPlugin/BSActorHover.cs create mode 100755 OpenSim/Region/Physics/BulletSPlugin/BSActorMoveToTarget.cs create mode 100755 OpenSim/Region/Physics/BulletSPlugin/BSActorSetForce.cs create mode 100755 OpenSim/Region/Physics/BulletSPlugin/BSActorSetTorque.cs (limited to 'OpenSim/Region/Physics') diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSActorAvatarMove.cs b/OpenSim/Region/Physics/BulletSPlugin/BSActorAvatarMove.cs new file mode 100755 index 0000000..634a898 --- /dev/null +++ b/OpenSim/Region/Physics/BulletSPlugin/BSActorAvatarMove.cs @@ -0,0 +1,287 @@ +/* + * Copyright (c) Contributors, http://opensimulator.org/ + * See CONTRIBUTORS.TXT for a full list of copyright holders. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyrightD + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of the OpenSimulator Project nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +using System; +using System.Collections.Generic; +using System.Linq; +using System.Text; + +using OpenSim.Region.Physics.Manager; + +using OMV = OpenMetaverse; + +namespace OpenSim.Region.Physics.BulletSPlugin +{ +public class BSActorAvatarMove : BSActor +{ + BSVMotor m_velocityMotor; + + public BSActorAvatarMove(BSScene physicsScene, BSPhysObject pObj, string actorName) + : base(physicsScene, pObj, actorName) + { + m_velocityMotor = null; + m_physicsScene.DetailLog("{0},BSActorAvatarMove,constructor", m_controllingPrim.LocalID); + } + + // BSActor.isActive + public override bool isActive + { + get { return Enabled && m_controllingPrim.IsPhysicallyActive; } + } + + // Release any connections and resources used by the actor. + // BSActor.Dispose() + public override void Dispose() + { + Enabled = false; + } + + // Called when physical parameters (properties set in Bullet) need to be re-applied. + // Called at taint-time. + // BSActor.Refresh() + public override void Refresh() + { + m_physicsScene.DetailLog("{0},BSActorAvatarMove,refresh", m_controllingPrim.LocalID); + + // If not active any more, get rid of me (shouldn't ever happen, but just to be safe) + if (m_controllingPrim.RawForce == OMV.Vector3.Zero) + { + m_physicsScene.DetailLog("{0},BSActorAvatarMove,refresh,notAvatarMove,removing={1}", m_controllingPrim.LocalID, ActorName); + m_controllingPrim.PhysicalActors.RemoveAndRelease(ActorName); + return; + } + + // If the object is physically active, add the hoverer prestep action + if (isActive) + { + ActivateAvatarMove(); + } + else + { + DeactivateAvatarMove(); + } + } + + // The object's physical representation is being rebuilt so pick up any physical dependencies (constraints, ...). + // Register a prestep action to restore physical requirements before the next simulation step. + // Called at taint-time. + // BSActor.RemoveBodyDependencies() + public override void RemoveBodyDependencies() + { + // Nothing to do for the hoverer since it is all software at pre-step action time. + } + + public void SetVelocityAndTarget(OMV.Vector3 vel, OMV.Vector3 targ, bool inTaintTime) + { + m_physicsScene.TaintedObject(inTaintTime, "BSActorAvatarMove.setVelocityAndTarget", delegate() + { + m_velocityMotor.Reset(); + m_velocityMotor.SetTarget(targ); + m_velocityMotor.SetCurrent(vel); + m_velocityMotor.Enabled = true; + }); + } + + // If a hover motor has not been created, create one and start the hovering. + private void ActivateAvatarMove() + { + if (m_velocityMotor == null) + { + // Infinite decay and timescale values so motor only changes current to target values. + m_velocityMotor = new BSVMotor("BSCharacter.Velocity", + 0.2f, // time scale + BSMotor.Infinite, // decay time scale + BSMotor.InfiniteVector, // friction timescale + 1f // efficiency + ); + // _velocityMotor.PhysicsScene = PhysicsScene; // DEBUG DEBUG so motor will output detail log messages. + + m_physicsScene.BeforeStep += Mover; + } + } + + private void DeactivateAvatarMove() + { + if (m_velocityMotor != null) + { + m_physicsScene.BeforeStep -= Mover; + m_velocityMotor = null; + } + } + + // Called just before the simulation step. Update the vertical position for hoverness. + private void Mover(float timeStep) + { + // Don't do movement while the object is selected. + if (!isActive) + return; + + // TODO: Decide if the step parameters should be changed depending on the avatar's + // state (flying, colliding, ...). There is code in ODE to do this. + + // COMMENTARY: when the user is making the avatar walk, except for falling, the velocity + // specified for the avatar is the one that should be used. For falling, if the avatar + // is not flying and is not colliding then it is presumed to be falling and the Z + // component is not fooled with (thus allowing gravity to do its thing). + // When the avatar is standing, though, the user has specified a velocity of zero and + // the avatar should be standing. But if the avatar is pushed by something in the world + // (raising elevator platform, moving vehicle, ...) the avatar should be allowed to + // move. Thus, the velocity cannot be forced to zero. The problem is that small velocity + // errors can creap in and the avatar will slowly float off in some direction. + // So, the problem is that, when an avatar is standing, we cannot tell creaping error + // from real pushing. + // The code below uses whether the collider is static or moving to decide whether to zero motion. + + m_velocityMotor.Step(timeStep); + m_controllingPrim.IsStationary = false; + + // If we're not supposed to be moving, make sure things are zero. + if (m_velocityMotor.ErrorIsZero() && m_velocityMotor.TargetValue == OMV.Vector3.Zero) + { + // The avatar shouldn't be moving + m_velocityMotor.Zero(); + + if (m_controllingPrim.IsColliding) + { + // If we are colliding with a stationary object, presume we're standing and don't move around + if (!m_controllingPrim.ColliderIsMoving) + { + m_physicsScene.DetailLog("{0},BSCharacter.MoveMotor,collidingWithStationary,zeroingMotion", m_controllingPrim.LocalID); + m_controllingPrim.IsStationary = true; + m_controllingPrim.ZeroMotion(true /* inTaintTime */); + } + + // Standing has more friction on the ground + if (m_controllingPrim.Friction != BSParam.AvatarStandingFriction) + { + m_controllingPrim.Friction = BSParam.AvatarStandingFriction; + m_physicsScene.PE.SetFriction(m_controllingPrim.PhysBody, m_controllingPrim.Friction); + } + } + else + { + if (m_controllingPrim.Flying) + { + // Flying and not collising and velocity nearly zero. + m_controllingPrim.ZeroMotion(true /* inTaintTime */); + } + } + + m_physicsScene.DetailLog("{0},BSCharacter.MoveMotor,taint,stopping,target={1},colliding={2}", + m_controllingPrim.LocalID, m_velocityMotor.TargetValue, m_controllingPrim.IsColliding); + } + else + { + // Supposed to be moving. + OMV.Vector3 stepVelocity = m_velocityMotor.CurrentValue; + + if (m_controllingPrim.Friction != BSParam.AvatarFriction) + { + // Probably starting up walking. Set friction to moving friction. + m_controllingPrim.Friction = BSParam.AvatarFriction; + m_physicsScene.PE.SetFriction(m_controllingPrim.PhysBody, m_controllingPrim.Friction); + } + + // If falling, we keep the world's downward vector no matter what the other axis specify. + // The check for RawVelocity.Z < 0 makes jumping work (temporary upward force). + if (!m_controllingPrim.Flying && !m_controllingPrim.IsColliding) + { + if (m_controllingPrim.RawVelocity.Z < 0) + stepVelocity.Z = m_controllingPrim.RawVelocity.Z; + // DetailLog("{0},BSCharacter.MoveMotor,taint,overrideStepZWithWorldZ,stepVel={1}", LocalID, stepVelocity); + } + + // 'stepVelocity' is now the speed we'd like the avatar to move in. Turn that into an instantanous force. + OMV.Vector3 moveForce = (stepVelocity - m_controllingPrim.RawVelocity) * m_controllingPrim.Mass; + + // Should we check for move force being small and forcing velocity to zero? + + // Add special movement force to allow avatars to walk up stepped surfaces. + moveForce += WalkUpStairs(); + + m_physicsScene.DetailLog("{0},BSCharacter.MoveMotor,move,stepVel={1},vel={2},mass={3},moveForce={4}", + m_controllingPrim.LocalID, stepVelocity, m_controllingPrim.RawVelocity, m_controllingPrim.Mass, moveForce); + m_physicsScene.PE.ApplyCentralImpulse(m_controllingPrim.PhysBody, moveForce); + } + } + + // Decide if the character is colliding with a low object and compute a force to pop the + // avatar up so it can walk up and over the low objects. + private OMV.Vector3 WalkUpStairs() + { + OMV.Vector3 ret = OMV.Vector3.Zero; + + // This test is done if moving forward, not flying and is colliding with something. + // DetailLog("{0},BSCharacter.WalkUpStairs,IsColliding={1},flying={2},targSpeed={3},collisions={4}", + // LocalID, IsColliding, Flying, TargetSpeed, CollisionsLastTick.Count); + if (m_controllingPrim.IsColliding && !m_controllingPrim.Flying && m_controllingPrim.TargetVelocitySpeed > 0.1f /* && ForwardSpeed < 0.1f */) + { + // The range near the character's feet where we will consider stairs + float nearFeetHeightMin = m_controllingPrim.RawPosition.Z - (m_controllingPrim.Size.Z / 2f) + 0.05f; + float nearFeetHeightMax = nearFeetHeightMin + BSParam.AvatarStepHeight; + + // Look for a collision point that is near the character's feet and is oriented the same as the charactor is + foreach (KeyValuePair kvp in m_controllingPrim.CollisionsLastTick.m_objCollisionList) + { + // Don't care about collisions with the terrain + if (kvp.Key > m_physicsScene.TerrainManager.HighestTerrainID) + { + OMV.Vector3 touchPosition = kvp.Value.Position; + // DetailLog("{0},BSCharacter.WalkUpStairs,min={1},max={2},touch={3}", + // LocalID, nearFeetHeightMin, nearFeetHeightMax, touchPosition); + if (touchPosition.Z >= nearFeetHeightMin && touchPosition.Z <= nearFeetHeightMax) + { + // This contact is within the 'near the feet' range. + // The normal should be our contact point to the object so it is pointing away + // thus the difference between our facing orientation and the normal should be small. + OMV.Vector3 directionFacing = OMV.Vector3.UnitX * m_controllingPrim.RawOrientation; + OMV.Vector3 touchNormal = OMV.Vector3.Normalize(kvp.Value.SurfaceNormal); + float diff = Math.Abs(OMV.Vector3.Distance(directionFacing, touchNormal)); + if (diff < BSParam.AvatarStepApproachFactor) + { + // Found the stairs contact point. Push up a little to raise the character. + float upForce = (touchPosition.Z - nearFeetHeightMin) * m_controllingPrim.Mass * BSParam.AvatarStepForceFactor; + ret = new OMV.Vector3(0f, 0f, upForce); + + // Also move the avatar up for the new height + OMV.Vector3 displacement = new OMV.Vector3(0f, 0f, BSParam.AvatarStepHeight / 2f); + m_controllingPrim.ForcePosition = m_controllingPrim.RawPosition + displacement; + } + m_physicsScene.DetailLog("{0},BSCharacter.WalkUpStairs,touchPos={1},nearFeetMin={2},faceDir={3},norm={4},diff={5},ret={6}", + m_controllingPrim.LocalID, touchPosition, nearFeetHeightMin, directionFacing, touchNormal, diff, ret); + } + } + } + } + + return ret; + } + +} +} + + diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSActorHover.cs b/OpenSim/Region/Physics/BulletSPlugin/BSActorHover.cs new file mode 100755 index 0000000..8dd3700 --- /dev/null +++ b/OpenSim/Region/Physics/BulletSPlugin/BSActorHover.cs @@ -0,0 +1,176 @@ +/* + * Copyright (c) Contributors, http://opensimulator.org/ + * See CONTRIBUTORS.TXT for a full list of copyright holders. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyrightD + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of the OpenSimulator Project nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +using System; +using System.Collections.Generic; +using System.Linq; +using System.Text; + +using OpenSim.Region.Physics.Manager; + +using OMV = OpenMetaverse; + +namespace OpenSim.Region.Physics.BulletSPlugin +{ +public class BSActorHover : BSActor +{ + private BSFMotor m_hoverMotor; + + public BSActorHover(BSScene physicsScene, BSPhysObject pObj, string actorName) + : base(physicsScene, pObj, actorName) + { + m_hoverMotor = null; + m_physicsScene.DetailLog("{0},BSActorHover,constructor", m_controllingPrim.LocalID); + } + + // BSActor.isActive + public override bool isActive + { + get { return Enabled && m_controllingPrim.IsPhysicallyActive; } + } + + // Release any connections and resources used by the actor. + // BSActor.Dispose() + public override void Dispose() + { + Enabled = false; + } + + // Called when physical parameters (properties set in Bullet) need to be re-applied. + // Called at taint-time. + // BSActor.Refresh() + public override void Refresh() + { + m_physicsScene.DetailLog("{0},BSActorHover,refresh", m_controllingPrim.LocalID); + + // If not active any more, get rid of me (shouldn't ever happen, but just to be safe) + if (!m_controllingPrim.HoverActive) + { + m_physicsScene.DetailLog("{0},BSActorHover,refresh,notHovering,removing={1}", m_controllingPrim.LocalID, ActorName); + m_controllingPrim.PhysicalActors.RemoveAndRelease(ActorName); + return; + } + + // If the object is physically active, add the hoverer prestep action + if (isActive) + { + ActivateHover(); + } + else + { + DeactivateHover(); + } + } + + // The object's physical representation is being rebuilt so pick up any physical dependencies (constraints, ...). + // Register a prestep action to restore physical requirements before the next simulation step. + // Called at taint-time. + // BSActor.RemoveBodyDependencies() + public override void RemoveBodyDependencies() + { + // Nothing to do for the hoverer since it is all software at pre-step action time. + } + + // If a hover motor has not been created, create one and start the hovering. + private void ActivateHover() + { + if (m_hoverMotor == null) + { + // Turning the target on + m_hoverMotor = new BSFMotor("BSActorHover", + m_controllingPrim.HoverTau, // timeScale + BSMotor.Infinite, // decay time scale + BSMotor.Infinite, // friction timescale + 1f // efficiency + ); + m_hoverMotor.SetTarget(ComputeCurrentHoverHeight()); + m_hoverMotor.SetCurrent(m_controllingPrim.RawPosition.Z); + m_hoverMotor.PhysicsScene = m_physicsScene; // DEBUG DEBUG so motor will output detail log messages. + + m_physicsScene.BeforeStep += Hoverer; + } + } + + private void DeactivateHover() + { + if (m_hoverMotor != null) + { + m_physicsScene.BeforeStep -= Hoverer; + m_hoverMotor = null; + } + } + + // Called just before the simulation step. Update the vertical position for hoverness. + private void Hoverer(float timeStep) + { + // Don't do hovering while the object is selected. + if (!isActive) + return; + + m_hoverMotor.SetCurrent(m_controllingPrim.RawPosition.Z); + m_hoverMotor.SetTarget(ComputeCurrentHoverHeight()); + float targetHeight = m_hoverMotor.Step(timeStep); + + // 'targetHeight' is where we'd like the Z of the prim to be at this moment. + // Compute the amount of force to push us there. + float moveForce = (targetHeight - m_controllingPrim.RawPosition.Z) * m_controllingPrim.RawMass; + // Undo anything the object thinks it's doing at the moment + moveForce = -m_controllingPrim.RawVelocity.Z * m_controllingPrim.Mass; + + m_physicsScene.PE.ApplyCentralImpulse(m_controllingPrim.PhysBody, new OMV.Vector3(0f, 0f, moveForce)); + m_physicsScene.DetailLog("{0},BSPrim.Hover,move,targHt={1},moveForce={2},mass={3}", + m_controllingPrim.LocalID, targetHeight, moveForce, m_controllingPrim.RawMass); + } + + // Based on current position, determine what we should be hovering at now. + // Must recompute often. What if we walked offa cliff> + private float ComputeCurrentHoverHeight() + { + float ret = m_controllingPrim.HoverHeight; + float groundHeight = m_physicsScene.TerrainManager.GetTerrainHeightAtXYZ(m_controllingPrim.RawPosition); + + switch (m_controllingPrim.HoverType) + { + case PIDHoverType.Ground: + ret = groundHeight + m_controllingPrim.HoverHeight; + break; + case PIDHoverType.GroundAndWater: + float waterHeight = m_physicsScene.TerrainManager.GetWaterLevelAtXYZ(m_controllingPrim.RawPosition); + if (groundHeight > waterHeight) + { + ret = groundHeight + m_controllingPrim.HoverHeight; + } + else + { + ret = waterHeight + m_controllingPrim.HoverHeight; + } + break; + } + return ret; + } +} +} diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSActorLockAxis.cs b/OpenSim/Region/Physics/BulletSPlugin/BSActorLockAxis.cs index 7219617..c40a499 100755 --- a/OpenSim/Region/Physics/BulletSPlugin/BSActorLockAxis.cs +++ b/OpenSim/Region/Physics/BulletSPlugin/BSActorLockAxis.cs @@ -40,7 +40,7 @@ public class BSActorLockAxis : BSActor BSConstraint LockAxisConstraint = null; public BSActorLockAxis(BSScene physicsScene, BSPhysObject pObj, string actorName) - : base(physicsScene, pObj,actorName) + : base(physicsScene, pObj, actorName) { m_physicsScene.DetailLog("{0},BSActorLockAxis,constructor", m_controllingPrim.LocalID); LockAxisConstraint = null; @@ -99,7 +99,7 @@ public class BSActorLockAxis : BSActor // If a constraint is set up, remove it from the physical scene RemoveAxisLockConstraint(); // Schedule a call before the next simulation step to restore the constraint. - m_physicsScene.PostTaintObject(m_controllingPrim.LockedAxisActorName, m_controllingPrim.LocalID, delegate() + m_physicsScene.PostTaintObject("BSActorLockAxis:" + ActorName, m_controllingPrim.LocalID, delegate() { Refresh(); }); diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSActorMoveToTarget.cs b/OpenSim/Region/Physics/BulletSPlugin/BSActorMoveToTarget.cs new file mode 100755 index 0000000..3517ef2 --- /dev/null +++ b/OpenSim/Region/Physics/BulletSPlugin/BSActorMoveToTarget.cs @@ -0,0 +1,156 @@ +/* + * Copyright (c) Contributors, http://opensimulator.org/ + * See CONTRIBUTORS.TXT for a full list of copyright holders. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyrightD + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of the OpenSimulator Project nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +using System; +using System.Collections.Generic; +using System.Linq; +using System.Text; + +using OpenSim.Region.Physics.Manager; + +using OMV = OpenMetaverse; + +namespace OpenSim.Region.Physics.BulletSPlugin +{ +public class BSActorMoveToTarget : BSActor +{ + private BSVMotor m_targetMotor; + + public BSActorMoveToTarget(BSScene physicsScene, BSPhysObject pObj, string actorName) + : base(physicsScene, pObj, actorName) + { + m_targetMotor = null; + m_physicsScene.DetailLog("{0},BSActorMoveToTarget,constructor", m_controllingPrim.LocalID); + } + + // BSActor.isActive + public override bool isActive + { + get { return Enabled && m_controllingPrim.IsPhysicallyActive; } + } + + // Release any connections and resources used by the actor. + // BSActor.Dispose() + public override void Dispose() + { + Enabled = false; + } + + // Called when physical parameters (properties set in Bullet) need to be re-applied. + // Called at taint-time. + // BSActor.Refresh() + public override void Refresh() + { + m_physicsScene.DetailLog("{0},BSActorMoveToTarget,refresh", m_controllingPrim.LocalID); + + // If not active any more, get rid of me (shouldn't ever happen, but just to be safe) + if (!m_controllingPrim.HoverActive) + { + m_physicsScene.DetailLog("{0},BSActorMoveToTarget,refresh,notMoveToTarget,removing={1}", m_controllingPrim.LocalID, ActorName); + m_controllingPrim.PhysicalActors.RemoveAndRelease(ActorName); + return; + } + + // If the object is physically active, add the hoverer prestep action + if (isActive) + { + ActivateMoveToTarget(); + } + else + { + DeactivateMoveToTarget(); + } + } + + // The object's physical representation is being rebuilt so pick up any physical dependencies (constraints, ...). + // Register a prestep action to restore physical requirements before the next simulation step. + // Called at taint-time. + // BSActor.RemoveBodyDependencies() + public override void RemoveBodyDependencies() + { + // Nothing to do for the hoverer since it is all software at pre-step action time. + } + + // If a hover motor has not been created, create one and start the hovering. + private void ActivateMoveToTarget() + { + if (m_targetMotor == null) + { + // We're taking over after this. + m_controllingPrim.ZeroMotion(true); + + m_targetMotor = new BSVMotor("BSPrim.PIDTarget", + m_controllingPrim.MoveToTargetTau, // timeScale + BSMotor.Infinite, // decay time scale + BSMotor.InfiniteVector, // friction timescale + 1f // efficiency + ); + m_targetMotor.PhysicsScene = m_physicsScene; // DEBUG DEBUG so motor will output detail log messages. + m_targetMotor.SetTarget(m_controllingPrim.MoveToTargetTarget); + m_targetMotor.SetCurrent(m_controllingPrim.RawPosition); + + m_physicsScene.BeforeStep += Mover; + } + } + + private void DeactivateMoveToTarget() + { + if (m_targetMotor != null) + { + m_physicsScene.BeforeStep -= Mover; + m_targetMotor = null; + } + } + + // Called just before the simulation step. Update the vertical position for hoverness. + private void Mover(float timeStep) + { + // Don't do hovering while the object is selected. + if (!isActive) + return; + + OMV.Vector3 origPosition = m_controllingPrim.RawPosition; // DEBUG DEBUG (for printout below) + + // 'movePosition' is where we'd like the prim to be at this moment. + OMV.Vector3 movePosition = m_controllingPrim.RawPosition + m_targetMotor.Step(timeStep); + + // If we are very close to our target, turn off the movement motor. + if (m_targetMotor.ErrorIsZero()) + { + m_physicsScene.DetailLog("{0},BSPrim.PIDTarget,zeroMovement,movePos={1},pos={2},mass={3}", + m_controllingPrim.LocalID, movePosition, m_controllingPrim.RawPosition, m_controllingPrim.Mass); + m_controllingPrim.ForcePosition = m_targetMotor.TargetValue; + m_targetMotor.Enabled = false; + } + else + { + m_controllingPrim.ForcePosition = movePosition; + } + m_physicsScene.DetailLog("{0},BSPrim.PIDTarget,move,fromPos={1},movePos={2}", m_controllingPrim.LocalID, origPosition, movePosition); + } +} +} diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSActorSetForce.cs b/OpenSim/Region/Physics/BulletSPlugin/BSActorSetForce.cs new file mode 100755 index 0000000..d942490 --- /dev/null +++ b/OpenSim/Region/Physics/BulletSPlugin/BSActorSetForce.cs @@ -0,0 +1,137 @@ +/* + * Copyright (c) Contributors, http://opensimulator.org/ + * See CONTRIBUTORS.TXT for a full list of copyright holders. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyrightD + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of the OpenSimulator Project nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +using System; +using System.Collections.Generic; +using System.Linq; +using System.Text; + +using OpenSim.Region.Physics.Manager; + +using OMV = OpenMetaverse; + +namespace OpenSim.Region.Physics.BulletSPlugin +{ +public class BSActorSetForce : BSActor +{ + BSFMotor m_forceMotor; + + public BSActorSetForce(BSScene physicsScene, BSPhysObject pObj, string actorName) + : base(physicsScene, pObj, actorName) + { + m_forceMotor = null; + m_physicsScene.DetailLog("{0},BSActorSetForce,constructor", m_controllingPrim.LocalID); + } + + // BSActor.isActive + public override bool isActive + { + get { return Enabled && m_controllingPrim.IsPhysicallyActive; } + } + + // Release any connections and resources used by the actor. + // BSActor.Dispose() + public override void Dispose() + { + Enabled = false; + } + + // Called when physical parameters (properties set in Bullet) need to be re-applied. + // Called at taint-time. + // BSActor.Refresh() + public override void Refresh() + { + m_physicsScene.DetailLog("{0},BSActorSetForce,refresh", m_controllingPrim.LocalID); + + // If not active any more, get rid of me (shouldn't ever happen, but just to be safe) + if (m_controllingPrim.RawForce == OMV.Vector3.Zero) + { + m_physicsScene.DetailLog("{0},BSActorSetForce,refresh,notSetForce,removing={1}", m_controllingPrim.LocalID, ActorName); + m_controllingPrim.PhysicalActors.RemoveAndRelease(ActorName); + return; + } + + // If the object is physically active, add the hoverer prestep action + if (isActive) + { + ActivateSetForce(); + } + else + { + DeactivateSetForce(); + } + } + + // The object's physical representation is being rebuilt so pick up any physical dependencies (constraints, ...). + // Register a prestep action to restore physical requirements before the next simulation step. + // Called at taint-time. + // BSActor.RemoveBodyDependencies() + public override void RemoveBodyDependencies() + { + // Nothing to do for the hoverer since it is all software at pre-step action time. + } + + // If a hover motor has not been created, create one and start the hovering. + private void ActivateSetForce() + { + if (m_forceMotor == null) + { + // A fake motor that might be used someday + m_forceMotor = new BSFMotor("setForce", 1f, 1f, 1f, 1f); + + m_physicsScene.BeforeStep += Mover; + } + } + + private void DeactivateSetForce() + { + if (m_forceMotor != null) + { + m_physicsScene.BeforeStep -= Mover; + m_forceMotor = null; + } + } + + // Called just before the simulation step. Update the vertical position for hoverness. + private void Mover(float timeStep) + { + // Don't do force while the object is selected. + if (!isActive) + return; + + m_physicsScene.DetailLog("{0},BSActorSetForce,preStep,force={1}", m_controllingPrim.LocalID, m_controllingPrim.RawForce); + if (m_controllingPrim.PhysBody.HasPhysicalBody) + { + m_physicsScene.PE.ApplyCentralForce(m_controllingPrim.PhysBody, m_controllingPrim.RawForce); + m_controllingPrim.ActivateIfPhysical(false); + } + + // TODO: + } +} +} + diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSActorSetTorque.cs b/OpenSim/Region/Physics/BulletSPlugin/BSActorSetTorque.cs new file mode 100755 index 0000000..e0f719f --- /dev/null +++ b/OpenSim/Region/Physics/BulletSPlugin/BSActorSetTorque.cs @@ -0,0 +1,138 @@ +/* + * Copyright (c) Contributors, http://opensimulator.org/ + * See CONTRIBUTORS.TXT for a full list of copyright holders. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyrightD + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of the OpenSimulator Project nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +using System; +using System.Collections.Generic; +using System.Linq; +using System.Text; + +using OpenSim.Region.Physics.Manager; + +using OMV = OpenMetaverse; + +namespace OpenSim.Region.Physics.BulletSPlugin +{ +public class BSActorSetTorque : BSActor +{ + BSFMotor m_torqueMotor; + + public BSActorSetTorque(BSScene physicsScene, BSPhysObject pObj, string actorName) + : base(physicsScene, pObj, actorName) + { + m_torqueMotor = null; + m_physicsScene.DetailLog("{0},BSActorSetTorque,constructor", m_controllingPrim.LocalID); + } + + // BSActor.isActive + public override bool isActive + { + get { return Enabled && m_controllingPrim.IsPhysicallyActive; } + } + + // Release any connections and resources used by the actor. + // BSActor.Dispose() + public override void Dispose() + { + Enabled = false; + } + + // Called when physical parameters (properties set in Bullet) need to be re-applied. + // Called at taint-time. + // BSActor.Refresh() + public override void Refresh() + { + m_physicsScene.DetailLog("{0},BSActorSetTorque,refresh", m_controllingPrim.LocalID); + + // If not active any more, get rid of me (shouldn't ever happen, but just to be safe) + if (m_controllingPrim.RawTorque == OMV.Vector3.Zero) + { + m_physicsScene.DetailLog("{0},BSActorSetTorque,refresh,notSetTorque,removing={1}", m_controllingPrim.LocalID, ActorName); + m_controllingPrim.PhysicalActors.RemoveAndRelease(ActorName); + return; + } + + // If the object is physically active, add the hoverer prestep action + if (isActive) + { + ActivateSetTorque(); + } + else + { + DeactivateSetTorque(); + } + } + + // The object's physical representation is being rebuilt so pick up any physical dependencies (constraints, ...). + // Register a prestep action to restore physical requirements before the next simulation step. + // Called at taint-time. + // BSActor.RemoveBodyDependencies() + public override void RemoveBodyDependencies() + { + // Nothing to do for the hoverer since it is all software at pre-step action time. + } + + // If a hover motor has not been created, create one and start the hovering. + private void ActivateSetTorque() + { + if (m_torqueMotor == null) + { + // A fake motor that might be used someday + m_torqueMotor = new BSFMotor("setTorque", 1f, 1f, 1f, 1f); + + m_physicsScene.BeforeStep += Mover; + } + } + + private void DeactivateSetTorque() + { + if (m_torqueMotor != null) + { + m_physicsScene.BeforeStep -= Mover; + m_torqueMotor = null; + } + } + + // Called just before the simulation step. Update the vertical position for hoverness. + private void Mover(float timeStep) + { + // Don't do force while the object is selected. + if (!isActive) + return; + + m_physicsScene.DetailLog("{0},BSActorSetTorque,preStep,force={1}", m_controllingPrim.LocalID, m_controllingPrim.RawTorque); + if (m_controllingPrim.PhysBody.HasPhysicalBody) + { + m_controllingPrim.AddAngularForce(m_controllingPrim.RawTorque, false, true); + m_controllingPrim.ActivateIfPhysical(false); + } + + // TODO: + } +} +} + + diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSActors.cs b/OpenSim/Region/Physics/BulletSPlugin/BSActors.cs index 5a19ba4..fb4d452 100755 --- a/OpenSim/Region/Physics/BulletSPlugin/BSActors.cs +++ b/OpenSim/Region/Physics/BulletSPlugin/BSActors.cs @@ -32,12 +32,12 @@ namespace OpenSim.Region.Physics.BulletSPlugin { public class BSActorCollection { - private BSScene PhysicsScene { get; set; } + private BSScene m_physicsScene { get; set; } private Dictionary m_actors; public BSActorCollection(BSScene physicsScene) { - PhysicsScene = physicsScene; + m_physicsScene = physicsScene; m_actors = new Dictionary(); } public void Add(string name, BSActor actor) @@ -61,6 +61,10 @@ public class BSActorCollection Release(); m_actors.Clear(); } + public void Dispose() + { + Clear(); + } public bool HasActor(string name) { return m_actors.ContainsKey(name); @@ -71,6 +75,10 @@ public class BSActorCollection act(kvp.Value); } + public void Enable(bool enabl) + { + ForEachActor(a => a.Enable(enabl)); + } public void Release() { ForEachActor(a => a.Dispose()); diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSCharacter.cs b/OpenSim/Region/Physics/BulletSPlugin/BSCharacter.cs index 25be416..09c9b16 100644 --- a/OpenSim/Region/Physics/BulletSPlugin/BSCharacter.cs +++ b/OpenSim/Region/Physics/BulletSPlugin/BSCharacter.cs @@ -46,9 +46,6 @@ public sealed class BSCharacter : BSPhysObject private OMV.Vector3 _position; private float _mass; private float _avatarVolume; - private OMV.Vector3 _force; - private OMV.Vector3 _velocity; - private OMV.Vector3 _torque; private float _collisionScore; private OMV.Vector3 _acceleration; private OMV.Quaternion _orientation; @@ -61,17 +58,13 @@ public sealed class BSCharacter : BSPhysObject private OMV.Vector3 _rotationalVelocity; private bool _kinematic; private float _buoyancy; - private bool _isStationaryStanding; // true is standing on a stationary object - private BSVMotor _velocityMotor; + private BSActorAvatarMove m_moveActor; + private const string AvatarMoveActorName = "BSCharacter.AvatarMove"; private OMV.Vector3 _PIDTarget; private bool _usePID; private float _PIDTau; - private bool _useHoverPID; - private float _PIDHoverHeight; - private PIDHoverType _PIDHoverType; - private float _PIDHoverTao; public BSCharacter(uint localID, String avName, BSScene parent_scene, OMV.Vector3 pos, OMV.Vector3 size, bool isFlying) : base(parent_scene, localID, avName, "BSCharacter") @@ -81,11 +74,10 @@ public sealed class BSCharacter : BSPhysObject _flying = isFlying; _orientation = OMV.Quaternion.Identity; - _velocity = OMV.Vector3.Zero; + RawVelocity = OMV.Vector3.Zero; _buoyancy = ComputeBuoyancyFromFlying(isFlying); Friction = BSParam.AvatarStandingFriction; Density = BSParam.AvatarDensity / BSParam.DensityScaleFactor; - _isStationaryStanding = false; // Old versions of ScenePresence passed only the height. If width and/or depth are zero, // replace with the default values. @@ -99,7 +91,12 @@ public sealed class BSCharacter : BSPhysObject // set _avatarVolume and _mass based on capsule size, _density and Scale ComputeAvatarVolumeAndMass(); - SetupMovementMotor(); + // The avatar's movement is controlled by this motor that speeds up and slows down + // the avatar seeking to reach the motor's target speed. + // This motor runs as a prestep action for the avatar so it will keep the avatar + // standing as well as moving. Destruction of the avatar will destroy the pre-step action. + m_moveActor = new BSActorAvatarMove(PhysicsScene, this, AvatarMoveActorName); + PhysicalActors.Add(AvatarMoveActorName, m_moveActor); DetailLog("{0},BSCharacter.create,call,size={1},scale={2},density={3},volume={4},mass={5}", LocalID, _size, Scale, Density, _avatarVolume, RawMass); @@ -139,10 +136,10 @@ public sealed class BSCharacter : BSPhysObject ForcePosition = _position; // Set the velocity - _velocityMotor.Reset(); - _velocityMotor.SetTarget(_velocity); - _velocityMotor.SetCurrent(_velocity); - ForceVelocity = _velocity; + if (m_moveActor != null) + m_moveActor.SetVelocityAndTarget(RawVelocity, RawVelocity, false); + + ForceVelocity = RawVelocity; // This will enable or disable the flying buoyancy of the avatar. // Needs to be reset especially when an avatar is recreated after crossing a region boundry. @@ -176,162 +173,6 @@ public sealed class BSCharacter : BSPhysObject PhysBody.ApplyCollisionMask(PhysicsScene); } - // The avatar's movement is controlled by this motor that speeds up and slows down - // the avatar seeking to reach the motor's target speed. - // This motor runs as a prestep action for the avatar so it will keep the avatar - // standing as well as moving. Destruction of the avatar will destroy the pre-step action. - private void SetupMovementMotor() - { - // Infinite decay and timescale values so motor only changes current to target values. - _velocityMotor = new BSVMotor("BSCharacter.Velocity", - 0.2f, // time scale - BSMotor.Infinite, // decay time scale - BSMotor.InfiniteVector, // friction timescale - 1f // efficiency - ); - // _velocityMotor.PhysicsScene = PhysicsScene; // DEBUG DEBUG so motor will output detail log messages. - - RegisterPreStepAction("BSCharactor.Movement", LocalID, delegate(float timeStep) - { - // TODO: Decide if the step parameters should be changed depending on the avatar's - // state (flying, colliding, ...). There is code in ODE to do this. - - // COMMENTARY: when the user is making the avatar walk, except for falling, the velocity - // specified for the avatar is the one that should be used. For falling, if the avatar - // is not flying and is not colliding then it is presumed to be falling and the Z - // component is not fooled with (thus allowing gravity to do its thing). - // When the avatar is standing, though, the user has specified a velocity of zero and - // the avatar should be standing. But if the avatar is pushed by something in the world - // (raising elevator platform, moving vehicle, ...) the avatar should be allowed to - // move. Thus, the velocity cannot be forced to zero. The problem is that small velocity - // errors can creap in and the avatar will slowly float off in some direction. - // So, the problem is that, when an avatar is standing, we cannot tell creaping error - // from real pushing. - // The code below uses whether the collider is static or moving to decide whether to zero motion. - - _velocityMotor.Step(timeStep); - _isStationaryStanding = false; - - // If we're not supposed to be moving, make sure things are zero. - if (_velocityMotor.ErrorIsZero() && _velocityMotor.TargetValue == OMV.Vector3.Zero) - { - // The avatar shouldn't be moving - _velocityMotor.Zero(); - - if (IsColliding) - { - // If we are colliding with a stationary object, presume we're standing and don't move around - if (!ColliderIsMoving) - { - DetailLog("{0},BSCharacter.MoveMotor,collidingWithStationary,zeroingMotion", LocalID); - _isStationaryStanding = true; - ZeroMotion(true /* inTaintTime */); - } - - // Standing has more friction on the ground - if (Friction != BSParam.AvatarStandingFriction) - { - Friction = BSParam.AvatarStandingFriction; - PhysicsScene.PE.SetFriction(PhysBody, Friction); - } - } - else - { - if (Flying) - { - // Flying and not collising and velocity nearly zero. - ZeroMotion(true /* inTaintTime */); - } - } - - DetailLog("{0},BSCharacter.MoveMotor,taint,stopping,target={1},colliding={2}", LocalID, _velocityMotor.TargetValue, IsColliding); - } - else - { - // Supposed to be moving. - OMV.Vector3 stepVelocity = _velocityMotor.CurrentValue; - - if (Friction != BSParam.AvatarFriction) - { - // Probably starting up walking. Set friction to moving friction. - Friction = BSParam.AvatarFriction; - PhysicsScene.PE.SetFriction(PhysBody, Friction); - } - - // If falling, we keep the world's downward vector no matter what the other axis specify. - // The check for _velocity.Z < 0 makes jumping work (temporary upward force). - if (!Flying && !IsColliding) - { - if (_velocity.Z < 0) - stepVelocity.Z = _velocity.Z; - // DetailLog("{0},BSCharacter.MoveMotor,taint,overrideStepZWithWorldZ,stepVel={1}", LocalID, stepVelocity); - } - - // 'stepVelocity' is now the speed we'd like the avatar to move in. Turn that into an instantanous force. - OMV.Vector3 moveForce = (stepVelocity - _velocity) * Mass; - - // Should we check for move force being small and forcing velocity to zero? - - // Add special movement force to allow avatars to walk up stepped surfaces. - moveForce += WalkUpStairs(); - - DetailLog("{0},BSCharacter.MoveMotor,move,stepVel={1},vel={2},mass={3},moveForce={4}", LocalID, stepVelocity, _velocity, Mass, moveForce); - PhysicsScene.PE.ApplyCentralImpulse(PhysBody, moveForce); - } - }); - } - - // Decide if the character is colliding with a low object and compute a force to pop the - // avatar up so it can walk up and over the low objects. - private OMV.Vector3 WalkUpStairs() - { - OMV.Vector3 ret = OMV.Vector3.Zero; - - // This test is done if moving forward, not flying and is colliding with something. - // DetailLog("{0},BSCharacter.WalkUpStairs,IsColliding={1},flying={2},targSpeed={3},collisions={4}", - // LocalID, IsColliding, Flying, TargetSpeed, CollisionsLastTick.Count); - if (IsColliding && !Flying && TargetVelocitySpeed > 0.1f /* && ForwardSpeed < 0.1f */) - { - // The range near the character's feet where we will consider stairs - float nearFeetHeightMin = RawPosition.Z - (Size.Z / 2f) + 0.05f; - float nearFeetHeightMax = nearFeetHeightMin + BSParam.AvatarStepHeight; - - // Look for a collision point that is near the character's feet and is oriented the same as the charactor is - foreach (KeyValuePair kvp in CollisionsLastTick.m_objCollisionList) - { - // Don't care about collisions with the terrain - if (kvp.Key > PhysicsScene.TerrainManager.HighestTerrainID) - { - OMV.Vector3 touchPosition = kvp.Value.Position; - // DetailLog("{0},BSCharacter.WalkUpStairs,min={1},max={2},touch={3}", - // LocalID, nearFeetHeightMin, nearFeetHeightMax, touchPosition); - if (touchPosition.Z >= nearFeetHeightMin && touchPosition.Z <= nearFeetHeightMax) - { - // This contact is within the 'near the feet' range. - // The normal should be our contact point to the object so it is pointing away - // thus the difference between our facing orientation and the normal should be small. - OMV.Vector3 directionFacing = OMV.Vector3.UnitX * RawOrientation; - OMV.Vector3 touchNormal = OMV.Vector3.Normalize(kvp.Value.SurfaceNormal); - float diff = Math.Abs(OMV.Vector3.Distance(directionFacing, touchNormal)); - if (diff < BSParam.AvatarStepApproachFactor) - { - // Found the stairs contact point. Push up a little to raise the character. - float upForce = (touchPosition.Z - nearFeetHeightMin) * Mass * BSParam.AvatarStepForceFactor; - ret = new OMV.Vector3(0f, 0f, upForce); - - // Also move the avatar up for the new height - OMV.Vector3 displacement = new OMV.Vector3(0f, 0f, BSParam.AvatarStepHeight / 2f); - ForcePosition = RawPosition + displacement; - } - DetailLog("{0},BSCharacter.WalkUpStairs,touchPos={1},nearFeetMin={2},faceDir={3},norm={4},diff={5},ret={6}", - LocalID, touchPosition, nearFeetHeightMin, directionFacing, touchNormal, diff, ret); - } - } - } - } - - return ret; - } public override void RequestPhysicsterseUpdate() { @@ -403,7 +244,7 @@ public sealed class BSCharacter : BSPhysObject // Called at taint time! public override void ZeroMotion(bool inTaintTime) { - _velocity = OMV.Vector3.Zero; + RawVelocity = OMV.Vector3.Zero; _acceleration = OMV.Vector3.Zero; _rotationalVelocity = OMV.Vector3.Zero; @@ -542,15 +383,15 @@ public sealed class BSCharacter : BSPhysObject } public override OMV.Vector3 Force { - get { return _force; } + get { return RawForce; } set { - _force = value; + RawForce = value; // m_log.DebugFormat("{0}: Force = {1}", LogHeader, _force); PhysicsScene.TaintedObject("BSCharacter.SetForce", delegate() { - DetailLog("{0},BSCharacter.setForce,taint,force={1}", LocalID, _force); + DetailLog("{0},BSCharacter.setForce,taint,force={1}", LocalID, RawForce); if (PhysBody.HasPhysicalBody) - PhysicsScene.PE.SetObjectForce(PhysBody, _force); + PhysicsScene.PE.SetObjectForce(PhysBody, RawForce); }); } } @@ -573,7 +414,7 @@ public sealed class BSCharacter : BSPhysObject { get { - return m_targetVelocity; + return base.m_targetVelocity; } set { @@ -583,51 +424,39 @@ public sealed class BSCharacter : BSPhysObject if (_setAlwaysRun) targetVel *= new OMV.Vector3(BSParam.AvatarAlwaysRunFactor, BSParam.AvatarAlwaysRunFactor, 0f); - PhysicsScene.TaintedObject("BSCharacter.setTargetVelocity", delegate() - { - _velocityMotor.Reset(); - _velocityMotor.SetTarget(targetVel); - _velocityMotor.SetCurrent(_velocity); - _velocityMotor.Enabled = true; - }); + if (m_moveActor != null) + m_moveActor.SetVelocityAndTarget(RawVelocity, targetVel, false /* inTaintTime */); } } - public override OMV.Vector3 RawVelocity - { - get { return _velocity; } - set { _velocity = value; } - } // Directly setting velocity means this is what the user really wants now. public override OMV.Vector3 Velocity { - get { return _velocity; } + get { return RawVelocity; } set { - _velocity = value; - // m_log.DebugFormat("{0}: set velocity = {1}", LogHeader, _velocity); + RawVelocity = value; + // m_log.DebugFormat("{0}: set velocity = {1}", LogHeader, RawVelocity); PhysicsScene.TaintedObject("BSCharacter.setVelocity", delegate() { - _velocityMotor.Reset(); - _velocityMotor.SetCurrent(_velocity); - _velocityMotor.SetTarget(_velocity); - _velocityMotor.Enabled = false; + if (m_moveActor != null) + m_moveActor.SetVelocityAndTarget(RawVelocity, RawVelocity, true /* inTaintTime */); - DetailLog("{0},BSCharacter.setVelocity,taint,vel={1}", LocalID, _velocity); - ForceVelocity = _velocity; + DetailLog("{0},BSCharacter.setVelocity,taint,vel={1}", LocalID, RawVelocity); + ForceVelocity = RawVelocity; }); } } public override OMV.Vector3 ForceVelocity { - get { return _velocity; } + get { return RawVelocity; } set { PhysicsScene.AssertInTaintTime("BSCharacter.ForceVelocity"); - _velocity = value; - PhysicsScene.PE.SetLinearVelocity(PhysBody, _velocity); + RawVelocity = value; + PhysicsScene.PE.SetLinearVelocity(PhysBody, RawVelocity); PhysicsScene.PE.Activate(PhysBody, true); } } public override OMV.Vector3 Torque { - get { return _torque; } - set { _torque = value; + get { return RawTorque; } + set { RawTorque = value; } } public override float CollisionScore { @@ -783,27 +612,6 @@ public sealed class BSCharacter : BSPhysObject set { _PIDTau = value; } } - // Used for llSetHoverHeight and maybe vehicle height - // Hover Height will override MoveTo target's Z - public override bool PIDHoverActive { - set { _useHoverPID = value; } - } - public override float PIDHoverHeight { - set { _PIDHoverHeight = value; } - } - public override PIDHoverType PIDHoverType { - set { _PIDHoverType = value; } - } - public override float PIDHoverTau { - set { _PIDHoverTao = value; } - } - - // For RotLookAt - public override OMV.Quaternion APIDTarget { set { return; } } - public override bool APIDActive { set { return; } } - public override float APIDStrength { set { return; } } - public override float APIDDamping { set { return; } } - public override void AddForce(OMV.Vector3 force, bool pushforce) { // Since this force is being applied in only one step, make this a force per second. @@ -833,7 +641,7 @@ public sealed class BSCharacter : BSPhysObject } } - public override void AddAngularForce(OMV.Vector3 force, bool pushforce) { + public override void AddAngularForce(OMV.Vector3 force, bool pushforce, bool inTaintTime) { } public override void SetMomentum(OMV.Vector3 momentum) { } @@ -887,7 +695,7 @@ public sealed class BSCharacter : BSPhysObject public override void UpdateProperties(EntityProperties entprop) { // Don't change position if standing on a stationary object. - if (!_isStationaryStanding) + if (!IsStationary) _position = entprop.Position; _orientation = entprop.Rotation; @@ -896,8 +704,8 @@ public sealed class BSCharacter : BSPhysObject // and will send agent updates to the clients if velocity changes by more than // 0.001m/s. Bullet introduces a lot of jitter in the velocity which causes many // extra updates. - if (!entprop.Velocity.ApproxEquals(_velocity, 0.1f)) - _velocity = entprop.Velocity; + if (!entprop.Velocity.ApproxEquals(RawVelocity, 0.1f)) + RawVelocity = entprop.Velocity; _acceleration = entprop.Acceleration; _rotationalVelocity = entprop.RotationalVelocity; @@ -920,7 +728,7 @@ public sealed class BSCharacter : BSPhysObject // base.RequestPhysicsterseUpdate(); DetailLog("{0},BSCharacter.UpdateProperties,call,pos={1},orient={2},vel={3},accel={4},rotVel={5}", - LocalID, _position, _orientation, _velocity, _acceleration, _rotationalVelocity); + LocalID, _position, _orientation, RawVelocity, _acceleration, _rotationalVelocity); } } } diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSPhysObject.cs b/OpenSim/Region/Physics/BulletSPlugin/BSPhysObject.cs index 98ea833..644bc7e 100755 --- a/OpenSim/Region/Physics/BulletSPlugin/BSPhysObject.cs +++ b/OpenSim/Region/Physics/BulletSPlugin/BSPhysObject.cs @@ -43,7 +43,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin * VariableName: used by the simulator and performs taint operations, etc * RawVariableName: direct reference to the BulletSim storage for the variable value * ForceVariableName: direct reference (store and fetch) to the value in the physics engine. - * The last two (and certainly the last one) should be referenced only in taint-time. + * The last one should only be referenced in taint-time. */ /* @@ -84,6 +84,7 @@ public abstract class BSPhysObject : PhysicsActor // Initialize variables kept in base. GravModifier = 1.0f; Gravity = new OMV.Vector3(0f, 0f, BSParam.Gravity); + HoverActive = false; // We don't have any physical representation yet. PhysBody = new BulletBody(localID); @@ -110,11 +111,10 @@ public abstract class BSPhysObject : PhysicsActor // Tell the object to clean up. public virtual void Destroy() { - UnRegisterAllPreStepActions(); - UnRegisterAllPostStepActions(); + PhysicalActors.Enable(false); PhysicsScene.TaintedObject("BSPhysObject.Destroy", delegate() { - PhysicalActors.Release(); + PhysicalActors.Dispose(); }); } @@ -203,15 +203,48 @@ public abstract class BSPhysObject : PhysicsActor public abstract OMV.Quaternion RawOrientation { get; set; } public abstract OMV.Quaternion ForceOrientation { get; set; } - public abstract OMV.Vector3 RawVelocity { get; set; } + public OMV.Vector3 RawVelocity { get; set; } public abstract OMV.Vector3 ForceVelocity { get; set; } + public OMV.Vector3 RawForce { get; set; } + public OMV.Vector3 RawTorque { get; set; } + public override void AddAngularForce(OMV.Vector3 force, bool pushforce) + { + AddAngularForce(force, pushforce, false); + } + public abstract void AddAngularForce(OMV.Vector3 force, bool pushforce, bool inTaintTime); + public abstract OMV.Vector3 ForceRotationalVelocity { get; set; } public abstract float ForceBuoyancy { get; set; } public virtual bool ForceBodyShapeRebuild(bool inTaintTime) { return false; } + public override bool PIDActive { set { MoveToTargetActive = value; } } + public override OMV.Vector3 PIDTarget { set { MoveToTargetTarget = value; } } + public override float PIDTau { set { MoveToTargetTau = value; } } + + public bool MoveToTargetActive { get; set; } + public OMV.Vector3 MoveToTargetTarget { get; set; } + public float MoveToTargetTau { get; set; } + + // Used for llSetHoverHeight and maybe vehicle height. Hover Height will override MoveTo target's Z + public override bool PIDHoverActive { set { HoverActive = value; } } + public override float PIDHoverHeight { set { HoverHeight = value; } } + public override PIDHoverType PIDHoverType { set { HoverType = value; } } + public override float PIDHoverTau { set { HoverTau = value; } } + + public bool HoverActive { get; set; } + public float HoverHeight { get; set; } + public PIDHoverType HoverType { get; set; } + public float HoverTau { get; set; } + + // For RotLookAt + public override OMV.Quaternion APIDTarget { set { return; } } + public override bool APIDActive { set { return; } } + public override float APIDStrength { set { return; } } + public override float APIDDamping { set { return; } } + // The current velocity forward public virtual float ForwardSpeed { @@ -237,7 +270,44 @@ public abstract class BSPhysObject : PhysicsActor public OMV.Vector3 LockedAxis { get; set; } // zero means locked. one means free. public readonly OMV.Vector3 LockedAxisFree = new OMV.Vector3(1f, 1f, 1f); // All axis are free - public readonly String LockedAxisActorName = "BSPrim.LockedAxis"; + + // Enable physical actions. Bullet will keep sleeping non-moving physical objects so + // they need waking up when parameters are changed. + // Called in taint-time!! + public void ActivateIfPhysical(bool forceIt) + { + if (IsPhysical && PhysBody.HasPhysicalBody) + PhysicsScene.PE.Activate(PhysBody, forceIt); + } + + // 'actors' act on the physical object to change or constrain its motion. These can range from + // hovering to complex vehicle motion. + public delegate BSActor CreateActor(); + public void CreateRemoveActor(bool createRemove, string actorName, bool inTaintTime, CreateActor creator) + { + if (createRemove) + { + PhysicsScene.TaintedObject(inTaintTime, "BSPrim.CreateRemoveActor:" + actorName, delegate() + { + if (!PhysicalActors.HasActor(actorName)) + { + DetailLog("{0},BSPrim.CreateRemoveActor,taint,registerActor,a={1}", LocalID, actorName); + PhysicalActors.Add(actorName, creator()); + } + }); + } + else + { + PhysicsScene.TaintedObject(inTaintTime, "BSPrim.CreateRemoveActor:" + actorName, delegate() + { + if (PhysicalActors.HasActor(actorName)) + { + DetailLog("{0},BSPrim.CreateRemoveActor,taint,unregisterActor,a={1}", LocalID, actorName); + PhysicalActors.RemoveAndRelease(actorName); + } + }); + } + } #region Collisions @@ -255,7 +325,9 @@ public abstract class BSPhysObject : PhysicsActor protected CollisionFlags CurrentCollisionFlags { get; set; } // On a collision, check the collider and remember if the last collider was moving // Used to modify the standing of avatars (avatars on stationary things stand still) - protected bool ColliderIsMoving; + public bool ColliderIsMoving; + // Used by BSCharacter to manage standing (and not slipping) + public bool IsStationary; // Count of collisions for this object protected long CollisionAccumulation { get; set; } @@ -293,7 +365,7 @@ public abstract class BSPhysObject : PhysicsActor protected CollisionEventUpdate CollisionCollection; // Remember collisions from last tick for fancy collision based actions // (like a BSCharacter walking up stairs). - protected CollisionEventUpdate CollisionsLastTick; + public CollisionEventUpdate CollisionsLastTick; // The simulation step is telling this object about a collision. // Return 'true' if a collision was processed and should be sent up. @@ -424,104 +496,6 @@ public abstract class BSPhysObject : PhysicsActor public BSActorCollection PhysicalActors; - // There are some actions that must be performed for a physical object before each simulation step. - // These actions are optional so, rather than scanning all the physical objects and asking them - // if they have anything to do, a physical object registers for an event call before the step is performed. - // This bookkeeping makes it easy to add, remove and clean up after all these registrations. - private Dictionary RegisteredPrestepActions = new Dictionary(); - private Dictionary RegisteredPoststepActions = new Dictionary(); - protected void RegisterPreStepAction(string op, uint id, BSScene.PreStepAction actn) - { - string identifier = op + "-" + id.ToString(); - - lock (RegisteredPrestepActions) - { - // Clean out any existing action - UnRegisterPreStepAction(op, id); - RegisteredPrestepActions[identifier] = actn; - PhysicsScene.BeforeStep += actn; - } - DetailLog("{0},BSPhysObject.RegisterPreStepAction,id={1}", LocalID, identifier); - } - - // Unregister a pre step action. Safe to call if the action has not been registered. - // Returns 'true' if an action was actually removed - protected bool UnRegisterPreStepAction(string op, uint id) - { - string identifier = op + "-" + id.ToString(); - bool removed = false; - lock (RegisteredPrestepActions) - { - if (RegisteredPrestepActions.ContainsKey(identifier)) - { - PhysicsScene.BeforeStep -= RegisteredPrestepActions[identifier]; - RegisteredPrestepActions.Remove(identifier); - removed = true; - } - } - DetailLog("{0},BSPhysObject.UnRegisterPreStepAction,id={1},removed={2}", LocalID, identifier, removed); - return removed; - } - - protected void UnRegisterAllPreStepActions() - { - lock (RegisteredPrestepActions) - { - foreach (KeyValuePair kvp in RegisteredPrestepActions) - { - PhysicsScene.BeforeStep -= kvp.Value; - } - RegisteredPrestepActions.Clear(); - } - DetailLog("{0},BSPhysObject.UnRegisterAllPreStepActions,", LocalID); - } - - protected void RegisterPostStepAction(string op, uint id, BSScene.PostStepAction actn) - { - string identifier = op + "-" + id.ToString(); - - lock (RegisteredPoststepActions) - { - // Clean out any existing action - UnRegisterPostStepAction(op, id); - RegisteredPoststepActions[identifier] = actn; - PhysicsScene.AfterStep += actn; - } - DetailLog("{0},BSPhysObject.RegisterPostStepAction,id={1}", LocalID, identifier); - } - - // Unregister a pre step action. Safe to call if the action has not been registered. - // Returns 'true' if an action was actually removed. - protected bool UnRegisterPostStepAction(string op, uint id) - { - string identifier = op + "-" + id.ToString(); - bool removed = false; - lock (RegisteredPoststepActions) - { - if (RegisteredPoststepActions.ContainsKey(identifier)) - { - PhysicsScene.AfterStep -= RegisteredPoststepActions[identifier]; - RegisteredPoststepActions.Remove(identifier); - removed = true; - } - } - DetailLog("{0},BSPhysObject.UnRegisterPostStepAction,id={1},removed={2}", LocalID, identifier, removed); - return removed; - } - - protected void UnRegisterAllPostStepActions() - { - lock (RegisteredPoststepActions) - { - foreach (KeyValuePair kvp in RegisteredPoststepActions) - { - PhysicsScene.AfterStep -= kvp.Value; - } - RegisteredPoststepActions.Clear(); - } - DetailLog("{0},BSPhysObject.UnRegisterAllPostStepActions,", LocalID); - } - // When an update to the physical properties happens, this event is fired to let // different actors to modify the update before it is passed around public delegate void PreUpdatePropertyAction(ref EntityProperties entprop); @@ -533,46 +507,6 @@ public abstract class BSPhysObject : PhysicsActor actions(ref entprop); } - private Dictionary RegisteredPreUpdatePropertyActions = new Dictionary(); - public void RegisterPreUpdatePropertyAction(string identifier, PreUpdatePropertyAction actn) - { - lock (RegisteredPreUpdatePropertyActions) - { - // Clean out any existing action - UnRegisterPreUpdatePropertyAction(identifier); - RegisteredPreUpdatePropertyActions[identifier] = actn; - OnPreUpdateProperty += actn; - } - DetailLog("{0},BSPhysObject.RegisterPreUpdatePropertyAction,id={1}", LocalID, identifier); - } - public bool UnRegisterPreUpdatePropertyAction(string identifier) - { - bool removed = false; - lock (RegisteredPreUpdatePropertyActions) - { - if (RegisteredPreUpdatePropertyActions.ContainsKey(identifier)) - { - OnPreUpdateProperty -= RegisteredPreUpdatePropertyActions[identifier]; - RegisteredPreUpdatePropertyActions.Remove(identifier); - removed = true; - } - } - DetailLog("{0},BSPhysObject.UnRegisterPreUpdatePropertyAction,id={1},removed={2}", LocalID, identifier, removed); - return removed; - } - public void UnRegisterAllPreUpdatePropertyActions() - { - lock (RegisteredPreUpdatePropertyActions) - { - foreach (KeyValuePair kvp in RegisteredPreUpdatePropertyActions) - { - OnPreUpdateProperty -= kvp.Value; - } - RegisteredPreUpdatePropertyActions.Clear(); - } - DetailLog("{0},BSPhysObject.UnRegisterAllPreUpdatePropertyAction,", LocalID); - } - #endregion // Per Simulation Step actions // High performance detailed logging routine used by the physical objects. diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSPrim.cs b/OpenSim/Region/Physics/BulletSPlugin/BSPrim.cs index e56276a..71fea59 100644 --- a/OpenSim/Region/Physics/BulletSPlugin/BSPrim.cs +++ b/OpenSim/Region/Physics/BulletSPlugin/BSPrim.cs @@ -55,9 +55,6 @@ public class BSPrim : BSPhysObject private OMV.Vector3 _position; private float _mass; // the mass of this object - private OMV.Vector3 _force; - private OMV.Vector3 _velocity; - private OMV.Vector3 _torque; private OMV.Vector3 _acceleration; private OMV.Quaternion _orientation; private int _physicsActorType; @@ -73,16 +70,13 @@ public class BSPrim : BSPhysObject private int CrossingFailures { get; set; } public BSDynamics VehicleActor; - public string VehicleActorName = "BasicVehicle"; + public const string VehicleActorName = "BasicVehicle"; - private BSVMotor _targetMotor; - private OMV.Vector3 _PIDTarget; - private float _PIDTau; - - private BSFMotor _hoverMotor; - private float _PIDHoverHeight; - private PIDHoverType _PIDHoverType; - private float _PIDHoverTau; + public const string HoverActorName = "HoverActor"; + public const String LockedAxisActorName = "BSPrim.LockedAxis"; + public const string MoveToTargetActorName = "MoveToTargetActor"; + public const string SetForceActorName = "SetForceActor"; + public const string SetTorqueActorName = "SetTorqueActor"; public BSPrim(uint localID, String primName, BSScene parent_scene, OMV.Vector3 pos, OMV.Vector3 size, OMV.Quaternion rotation, PrimitiveBaseShape pbs, bool pisPhysical) @@ -95,7 +89,7 @@ public class BSPrim : BSPhysObject Scale = size; // prims are the size the user wants them to be (different for BSCharactes). _orientation = rotation; _buoyancy = 0f; - _velocity = OMV.Vector3.Zero; + RawVelocity = OMV.Vector3.Zero; _rotationalVelocity = OMV.Vector3.Zero; BaseShape = pbs; _isPhysical = pisPhysical; @@ -233,7 +227,7 @@ public class BSPrim : BSPhysObject // Called at taint time! public override void ZeroMotion(bool inTaintTime) { - _velocity = OMV.Vector3.Zero; + RawVelocity = OMV.Vector3.Zero; _acceleration = OMV.Vector3.Zero; _rotationalVelocity = OMV.Vector3.Zero; @@ -270,19 +264,17 @@ public class BSPrim : BSPhysObject if (axis.Z != 1) locking.Z = 0f; LockedAxis = locking; - if (LockedAxis != LockedAxisFree) + CreateRemoveActor(LockedAxis != LockedAxisFree /* creatActor */, LockedAxisActorName, false /* inTaintTime */, delegate() { - PhysicsScene.TaintedObject("BSPrim.LockAngularMotion", delegate() - { - // If there is not already an axis locker, make one - if (!PhysicalActors.HasActor(LockedAxisActorName)) - { - DetailLog("{0},BSPrim.LockAngularMotion,taint,registeringLockAxisActor", LocalID); - PhysicalActors.Add(LockedAxisActorName, new BSActorLockAxis(PhysicsScene, this, LockedAxisActorName)); - } - UpdatePhysicalParameters(); - }); - } + return new BSActorLockAxis(PhysicsScene, this, LockedAxisActorName); + }); + + // Update parameters so the new actor's Refresh() action is called at the right time. + PhysicsScene.TaintedObject("BSPrim.LockAngularMotion", delegate() + { + UpdatePhysicalParameters(); + }); + return; } @@ -407,9 +399,9 @@ public class BSPrim : BSPhysObject ZeroMotion(inTaintTime); ret = true; } - if (_velocity.LengthSquared() > BSParam.MaxLinearVelocity) + if (RawVelocity.LengthSquared() > BSParam.MaxLinearVelocity) { - _velocity = Util.ClampV(_velocity, BSParam.MaxLinearVelocity); + RawVelocity = Util.ClampV(RawVelocity, BSParam.MaxLinearVelocity); ret = true; } if (_rotationalVelocity.LengthSquared() > BSParam.MaxAngularVelocitySquared) @@ -506,35 +498,13 @@ public class BSPrim : BSPhysObject } public override OMV.Vector3 Force { - get { return _force; } + get { return RawForce; } set { - _force = value; - if (_force != OMV.Vector3.Zero) - { - // If the force is non-zero, it must be reapplied each tick because - // Bullet clears the forces applied last frame. - RegisterPreStepAction("BSPrim.setForce", LocalID, - delegate(float timeStep) - { - if (!IsPhysicallyActive || _force == OMV.Vector3.Zero) - { - UnRegisterPreStepAction("BSPrim.setForce", LocalID); - return; - } - - DetailLog("{0},BSPrim.setForce,preStep,force={1}", LocalID, _force); - if (PhysBody.HasPhysicalBody) - { - PhysicsScene.PE.ApplyCentralForce(PhysBody, _force); - ActivateIfPhysical(false); - } - } - ); - } - else + RawForce = value; + CreateRemoveActor(RawForce == OMV.Vector3.Zero, SetForceActorName, false /* inTaintTime */, delegate() { - UnRegisterPreStepAction("BSPrim.setForce", LocalID); - } + return new BSActorSetForce(PhysicsScene, this, SetForceActorName); + }); } } @@ -670,62 +640,39 @@ public class BSPrim : BSPhysObject } } } - public override OMV.Vector3 RawVelocity - { - get { return _velocity; } - set { _velocity = value; } - } public override OMV.Vector3 Velocity { - get { return _velocity; } + get { return RawVelocity; } set { - _velocity = value; + RawVelocity = value; PhysicsScene.TaintedObject("BSPrim.setVelocity", delegate() { - // DetailLog("{0},BSPrim.SetVelocity,taint,vel={1}", LocalID, _velocity); - ForceVelocity = _velocity; + // DetailLog("{0},BSPrim.SetVelocity,taint,vel={1}", LocalID, RawVelocity); + ForceVelocity = RawVelocity; }); } } public override OMV.Vector3 ForceVelocity { - get { return _velocity; } + get { return RawVelocity; } set { PhysicsScene.AssertInTaintTime("BSPrim.ForceVelocity"); - _velocity = Util.ClampV(value, BSParam.MaxLinearVelocity); + RawVelocity = Util.ClampV(value, BSParam.MaxLinearVelocity); if (PhysBody.HasPhysicalBody) { - DetailLog("{0},BSPrim.ForceVelocity,taint,vel={1}", LocalID, _velocity); - PhysicsScene.PE.SetLinearVelocity(PhysBody, _velocity); + DetailLog("{0},BSPrim.ForceVelocity,taint,vel={1}", LocalID, RawVelocity); + PhysicsScene.PE.SetLinearVelocity(PhysBody, RawVelocity); ActivateIfPhysical(false); } } } public override OMV.Vector3 Torque { - get { return _torque; } + get { return RawTorque; } set { - _torque = value; - if (_torque != OMV.Vector3.Zero) + RawTorque = value; + CreateRemoveActor(RawTorque == OMV.Vector3.Zero, SetTorqueActorName, false /* inTaintTime */, delegate() { - // If the torque is non-zero, it must be reapplied each tick because - // Bullet clears the forces applied last frame. - RegisterPreStepAction("BSPrim.setTorque", LocalID, - delegate(float timeStep) - { - if (!IsPhysicallyActive || _torque == OMV.Vector3.Zero) - { - UnRegisterPreStepAction("BSPrim.setTorque", LocalID); - return; - } - - if (PhysBody.HasPhysicalBody) - AddAngularForce(_torque, false, true); - } - ); - } - else - { - UnRegisterPreStepAction("BSPrim.setTorque", LocalID); - } + return new BSActorSetTorque(PhysicsScene, this, SetTorqueActorName); + }); // DetailLog("{0},BSPrim.SetTorque,call,torque={1}", LocalID, _torque); } } @@ -909,7 +856,7 @@ public class BSPrim : BSPhysObject // For good measure, make sure the transform is set through to the motion state ForcePosition = _position; - ForceVelocity = _velocity; + ForceVelocity = RawVelocity; ForceRotationalVelocity = _rotationalVelocity; // A dynamic object has mass @@ -966,15 +913,6 @@ public class BSPrim : BSPhysObject } } - // Enable physical actions. Bullet will keep sleeping non-moving physical objects so - // they need waking up when parameters are changed. - // Called in taint-time!! - private void ActivateIfPhysical(bool forceIt) - { - if (IsPhysical && PhysBody.HasPhysicalBody) - PhysicsScene.PE.Activate(PhysBody, forceIt); - } - // Turn on or off the flag controlling whether collision events are returned to the simulator. private void EnableCollisions(bool wantsCollisionEvents) { @@ -1096,78 +1034,13 @@ public class BSPrim : BSPhysObject } } - // Used for MoveTo - public override OMV.Vector3 PIDTarget { - set - { - // TODO: add a sanity check -- don't move more than a region or something like that. - _PIDTarget = value; - } - } - public override float PIDTau { - set { _PIDTau = value; } - } public override bool PIDActive { set { - if (value) - { - // We're taking over after this. - ZeroMotion(true); - - _targetMotor = new BSVMotor("BSPrim.PIDTarget", - _PIDTau, // timeScale - BSMotor.Infinite, // decay time scale - BSMotor.InfiniteVector, // friction timescale - 1f // efficiency - ); - _targetMotor.PhysicsScene = PhysicsScene; // DEBUG DEBUG so motor will output detail log messages. - _targetMotor.SetTarget(_PIDTarget); - _targetMotor.SetCurrent(RawPosition); - /* - _targetMotor = new BSPIDVMotor("BSPrim.PIDTarget"); - _targetMotor.PhysicsScene = PhysicsScene; // DEBUG DEBUG so motor will output detail log messages. - - _targetMotor.SetTarget(_PIDTarget); - _targetMotor.SetCurrent(RawPosition); - _targetMotor.TimeScale = _PIDTau; - _targetMotor.Efficiency = 1f; - */ - - RegisterPreStepAction("BSPrim.PIDTarget", LocalID, delegate(float timeStep) - { - if (!IsPhysicallyActive) - { - UnRegisterPreStepAction("BSPrim.PIDTarget", LocalID); - return; - } - - OMV.Vector3 origPosition = RawPosition; // DEBUG DEBUG (for printout below) - - // 'movePosition' is where we'd like the prim to be at this moment. - OMV.Vector3 movePosition = RawPosition + _targetMotor.Step(timeStep); - - // If we are very close to our target, turn off the movement motor. - if (_targetMotor.ErrorIsZero()) - { - DetailLog("{0},BSPrim.PIDTarget,zeroMovement,movePos={1},pos={2},mass={3}", - LocalID, movePosition, RawPosition, Mass); - ForcePosition = _targetMotor.TargetValue; - _targetMotor.Enabled = false; - } - else - { - _position = movePosition; - PositionSanityCheck(true /* intaintTime */); - ForcePosition = _position; - } - DetailLog("{0},BSPrim.PIDTarget,move,fromPos={1},movePos={2}", LocalID, origPosition, movePosition); - }); - } - else + base.MoveToTargetActive = value; + CreateRemoveActor(MoveToTargetActive, MoveToTargetActorName, false /* inTaintTime */, delegate() { - // Stop any targetting - UnRegisterPreStepAction("BSPrim.PIDTarget", LocalID); - } + return new BSActorMoveToTarget(PhysicsScene, this, MoveToTargetActorName); + }); } } @@ -1175,88 +1048,14 @@ public class BSPrim : BSPhysObject // Hover Height will override MoveTo target's Z public override bool PIDHoverActive { set { - if (value) - { - // Turning the target on - _hoverMotor = new BSFMotor("BSPrim.Hover", - _PIDHoverTau, // timeScale - BSMotor.Infinite, // decay time scale - BSMotor.Infinite, // friction timescale - 1f // efficiency - ); - _hoverMotor.SetTarget(ComputeCurrentPIDHoverHeight()); - _hoverMotor.SetCurrent(RawPosition.Z); - _hoverMotor.PhysicsScene = PhysicsScene; // DEBUG DEBUG so motor will output detail log messages. - - RegisterPreStepAction("BSPrim.Hover", LocalID, delegate(float timeStep) - { - // Don't do hovering while the object is selected. - if (!IsPhysicallyActive) - return; - - _hoverMotor.SetCurrent(RawPosition.Z); - _hoverMotor.SetTarget(ComputeCurrentPIDHoverHeight()); - float targetHeight = _hoverMotor.Step(timeStep); - - // 'targetHeight' is where we'd like the Z of the prim to be at this moment. - // Compute the amount of force to push us there. - float moveForce = (targetHeight - RawPosition.Z) * Mass; - // Undo anything the object thinks it's doing at the moment - moveForce = -RawVelocity.Z * Mass; - - PhysicsScene.PE.ApplyCentralImpulse(PhysBody, new OMV.Vector3(0f, 0f, moveForce)); - DetailLog("{0},BSPrim.Hover,move,targHt={1},moveForce={2},mass={3}", LocalID, targetHeight, moveForce, Mass); - }); - } - else + base.HoverActive = value; + CreateRemoveActor(HoverActive /* creatActor */, HoverActorName, false /* inTaintTime */, delegate() { - UnRegisterPreStepAction("BSPrim.Hover", LocalID); - } - } - } - public override float PIDHoverHeight { - set { _PIDHoverHeight = value; } - } - public override PIDHoverType PIDHoverType { - set { _PIDHoverType = value; } - } - public override float PIDHoverTau { - set { _PIDHoverTau = value; } - } - // Based on current position, determine what we should be hovering at now. - // Must recompute often. What if we walked offa cliff> - private float ComputeCurrentPIDHoverHeight() - { - float ret = _PIDHoverHeight; - float groundHeight = PhysicsScene.TerrainManager.GetTerrainHeightAtXYZ(RawPosition); - - switch (_PIDHoverType) - { - case PIDHoverType.Ground: - ret = groundHeight + _PIDHoverHeight; - break; - case PIDHoverType.GroundAndWater: - float waterHeight = PhysicsScene.TerrainManager.GetWaterLevelAtXYZ(RawPosition); - if (groundHeight > waterHeight) - { - ret = groundHeight + _PIDHoverHeight; - } - else - { - ret = waterHeight + _PIDHoverHeight; - } - break; + return new BSActorHover(PhysicsScene, this, HoverActorName); + }); } - return ret; } - - // For RotLookAt - public override OMV.Quaternion APIDTarget { set { return; } } - public override bool APIDActive { set { return; } } - public override float APIDStrength { set { return; } } - public override float APIDDamping { set { return; } } - public override void AddForce(OMV.Vector3 force, bool pushforce) { // Per documentation, max force is limited. OMV.Vector3 addForce = Util.ClampV(force, BSParam.MaxAddForceMagnitude); @@ -1324,10 +1123,8 @@ public class BSPrim : BSPhysObject } } - public override void AddAngularForce(OMV.Vector3 force, bool pushforce) { - AddAngularForce(force, pushforce, false); - } - public void AddAngularForce(OMV.Vector3 force, bool pushforce, bool inTaintTime) + // BSPhysObject.AddAngularForce() + public override void AddAngularForce(OMV.Vector3 force, bool pushforce, bool inTaintTime) { if (force.IsFinite()) { @@ -1694,8 +1491,8 @@ public class BSPrim : BSPhysObject _orientation = entprop.Rotation; // DEBUG DEBUG DEBUG -- smooth velocity changes a bit. The simulator seems to be // very sensitive to velocity changes. - if (entprop.Velocity == OMV.Vector3.Zero || !entprop.Velocity.ApproxEquals(_velocity, BSParam.UpdateVelocityChangeThreshold)) - _velocity = entprop.Velocity; + if (entprop.Velocity == OMV.Vector3.Zero || !entprop.Velocity.ApproxEquals(RawVelocity, BSParam.UpdateVelocityChangeThreshold)) + RawVelocity = entprop.Velocity; _acceleration = entprop.Acceleration; _rotationalVelocity = entprop.RotationalVelocity; @@ -1705,7 +1502,7 @@ public class BSPrim : BSPhysObject if (PositionSanityCheck(true /* inTaintTime */ )) { entprop.Position = _position; - entprop.Velocity = _velocity; + entprop.Velocity = RawVelocity; entprop.RotationalVelocity = _rotationalVelocity; entprop.Acceleration = _acceleration; } diff --git a/OpenSim/Region/Physics/BulletSPlugin/BulletSimTODO.txt b/OpenSim/Region/Physics/BulletSPlugin/BulletSimTODO.txt index 8a15abe..a0131c7 100755 --- a/OpenSim/Region/Physics/BulletSPlugin/BulletSimTODO.txt +++ b/OpenSim/Region/Physics/BulletSPlugin/BulletSimTODO.txt @@ -6,7 +6,6 @@ Enable vehicle border crossings (at least as poorly as ODE) Terrain skirts Avatar created in previous region and not new region when crossing border Vehicle recreated in new sim at small Z value (offset from root value?) (DONE) -Lock axis Deleting a linkset while standing on the root will leave the physical shape of the root behind. Not sure if it is because standing on it. Done with large prim linksets. Linkset child rotations. @@ -344,3 +343,5 @@ Angular motion around Z moves the vehicle in world Z and not vehicle Z in ODE. Verify that angular motion specified around Z moves in the vehicle coordinates. DONE 20130120: BulletSim properly applies force in vehicle relative coordinates. Nebadon vehicles turning funny in arena (DONE) +Lock axis (DONE 20130401) + -- cgit v1.1