From 8eda290262bb7049aa55a7df2bdb1565bad85a99 Mon Sep 17 00:00:00 2001 From: Robert Adams Date: Fri, 17 Aug 2012 09:37:02 -0700 Subject: BulletSim: comments and parameter changes in dynamics engine. --- OpenSim/Region/Physics/BulletSPlugin/BSDynamics.cs | 50 ++++++++++++---------- OpenSim/Region/Physics/BulletSPlugin/BSPrim.cs | 6 +-- 2 files changed, 30 insertions(+), 26 deletions(-) (limited to 'OpenSim/Region/Physics') diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSDynamics.cs b/OpenSim/Region/Physics/BulletSPlugin/BSDynamics.cs index 78bfa05..d7213fc 100644 --- a/OpenSim/Region/Physics/BulletSPlugin/BSDynamics.cs +++ b/OpenSim/Region/Physics/BulletSPlugin/BSDynamics.cs @@ -57,6 +57,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin private int frcount = 0; // Used to limit dynamics debug output to // every 100th frame + private BSScene m_physicsScene; private BSPrim m_prim; // the prim this dynamic controller belongs to // Vehicle properties @@ -123,15 +124,16 @@ namespace OpenSim.Region.Physics.BulletSPlugin private float m_verticalAttractionEfficiency = 1.0f; // damped private float m_verticalAttractionTimescale = 500f; // Timescale > 300 means no vert attractor. - public BSDynamics(BSPrim myPrim) + public BSDynamics(BSScene myScene, BSPrim myPrim) { + m_physicsScene = myScene; m_prim = myPrim; m_type = Vehicle.TYPE_NONE; } internal void ProcessFloatVehicleParam(Vehicle pParam, float pValue, float timestep) { - DetailLog("{0},ProcessFloatVehicleParam,param={1},val={2}", m_prim.LocalID, pParam, pValue); + VDetailLog("{0},ProcessFloatVehicleParam,param={1},val={2}", m_prim.LocalID, pParam, pValue); switch (pParam) { case Vehicle.ANGULAR_DEFLECTION_EFFICIENCY: @@ -230,7 +232,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin internal void ProcessVectorVehicleParam(Vehicle pParam, Vector3 pValue, float timestep) { - DetailLog("{0},ProcessVectorVehicleParam,param={1},val={2}", m_prim.LocalID, pParam, pValue); + VDetailLog("{0},ProcessVectorVehicleParam,param={1},val={2}", m_prim.LocalID, pParam, pValue); switch (pParam) { case Vehicle.ANGULAR_FRICTION_TIMESCALE: @@ -265,7 +267,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin internal void ProcessRotationVehicleParam(Vehicle pParam, Quaternion pValue) { - DetailLog("{0},ProcessRotationalVehicleParam,param={1},val={2}", m_prim.LocalID, pParam, pValue); + VDetailLog("{0},ProcessRotationalVehicleParam,param={1},val={2}", m_prim.LocalID, pParam, pValue); switch (pParam) { case Vehicle.REFERENCE_FRAME: @@ -279,7 +281,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin internal void ProcessVehicleFlags(int pParam, bool remove) { - DetailLog("{0},ProcessVehicleFlags,param={1},remove={2}", m_prim.LocalID, pParam, remove); + VDetailLog("{0},ProcessVehicleFlags,param={1},remove={2}", m_prim.LocalID, pParam, remove); VehicleFlag parm = (VehicleFlag)pParam; if (remove) { @@ -297,9 +299,9 @@ namespace OpenSim.Region.Physics.BulletSPlugin } }//end ProcessVehicleFlags - internal void ProcessTypeChange(Vehicle pType) + internal void ProcessTypeChange(Vehicle pType, float stepSize) { - DetailLog("{0},ProcessTypeChange,type={1}", m_prim.LocalID, pType); + VDetailLog("{0},ProcessTypeChange,type={1}", m_prim.LocalID, pType); // Set Defaults For Type m_type = pType; switch (pType) @@ -475,7 +477,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin MoveAngular(pTimestep); LimitRotation(pTimestep); - DetailLog("{0},BSDynamics.Step,done,pos={1},force={2},velocity={3},angvel={4}", + VDetailLog("{0},BSDynamics.Step,done,pos={1},force={2},velocity={3},angvel={4}", m_prim.LocalID, m_prim.Position, m_prim.Force, m_prim.Velocity, m_prim.RotationalVelocity); }// end Step @@ -519,7 +521,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin */ - DetailLog("{0},MoveLinear,nonZero,origdir={1},origvel={2},add={3},decay={4},dir={5},vel={6}", + VDetailLog("{0},MoveLinear,nonZero,origdir={1},origvel={2},add={3},decay={4},dir={5},vel={6}", m_prim.LocalID, origDir, origVel, addAmount, decayfraction, m_linearMotorDirection, m_lastLinearVelocityVector); } else @@ -531,7 +533,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin m_lastLinearVelocityVector = Vector3.Zero; } - // convert requested object velocity to world-referenced vector + // convert requested object velocity to object relative vector Quaternion rotq = m_prim.Orientation; m_dir = m_lastLinearVelocityVector * rotq; @@ -584,7 +586,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin if (changed) { m_prim.Position = pos; - DetailLog("{0},MoveLinear,blockingEndPoint,block={1},origPos={2},pos={3}", + VDetailLog("{0},MoveLinear,blockingEndPoint,block={1},origPos={2},pos={3}", m_prim.LocalID, m_BlockingEndPoint, posChange, pos); } } @@ -594,7 +596,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin { pos.Z = m_prim.Scene.GetTerrainHeightAtXYZ(pos) + 2; m_prim.Position = pos; - DetailLog("{0},MoveLinear,terrainHeight,pos={1}", m_prim.LocalID, pos); + VDetailLog("{0},MoveLinear,terrainHeight,pos={1}", m_prim.LocalID, pos); } // Check if hovering @@ -641,7 +643,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin } } - DetailLog("{0},MoveLinear,hover,pos={1},dir={2},height={3},target={4}", m_prim.LocalID, pos, m_dir, m_VhoverHeight, m_VhoverTargetHeight); + VDetailLog("{0},MoveLinear,hover,pos={1},dir={2},height={3},target={4}", m_prim.LocalID, pos, m_dir, m_VhoverHeight, m_VhoverTargetHeight); // m_VhoverEfficiency = 0f; // 0=boucy, 1=Crit.damped // m_VhoverTimescale = 0f; // time to acheive height @@ -677,7 +679,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin { grav.Z = (float)(grav.Z * 1.037125); } - DetailLog("{0},MoveLinear,limitMotorUp,grav={1}", m_prim.LocalID, grav); + VDetailLog("{0},MoveLinear,limitMotorUp,grav={1}", m_prim.LocalID, grav); //End Experimental Values } if ((m_flags & (VehicleFlag.NO_X)) != 0) @@ -706,7 +708,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin Vector3 decayamount = Vector3.One / (m_linearFrictionTimescale / pTimestep); m_lastLinearVelocityVector -= m_lastLinearVelocityVector * decayamount; - DetailLog("{0},MoveLinear,done,pos={1},vel={2},force={3},decay={4}", + VDetailLog("{0},MoveLinear,done,pos={1},vel={2},force={3},decay={4}", m_prim.LocalID, m_lastPositionVector, m_dir, grav, decayamount); } // end MoveLinear() @@ -732,13 +734,13 @@ namespace OpenSim.Region.Physics.BulletSPlugin // There are m_angularMotorApply steps. Vector3 origAngularVelocity = m_angularMotorVelocity; // ramp up to new value - // current velocity += error / (time to get there / step interval) + // current velocity += error / (time to get there / step interval) // requested speed - last motor speed m_angularMotorVelocity.X += (m_angularMotorDirection.X - m_angularMotorVelocity.X) / (m_angularMotorTimescale / pTimestep); m_angularMotorVelocity.Y += (m_angularMotorDirection.Y - m_angularMotorVelocity.Y) / (m_angularMotorTimescale / pTimestep); m_angularMotorVelocity.Z += (m_angularMotorDirection.Z - m_angularMotorVelocity.Z) / (m_angularMotorTimescale / pTimestep); - DetailLog("{0},MoveAngular,angularMotorApply,apply={1},origvel={2},dir={3},vel={4}", + VDetailLog("{0},MoveAngular,angularMotorApply,apply={1},origvel={2},dir={3},vel={4}", m_prim.LocalID,m_angularMotorApply,origAngularVelocity, m_angularMotorDirection, m_angularMotorVelocity); m_angularMotorApply--; // This is done so that if script request rate is less than phys frame rate the expected @@ -749,6 +751,8 @@ namespace OpenSim.Region.Physics.BulletSPlugin // No motor recently applied, keep the body velocity // and decay the velocity m_angularMotorVelocity -= m_angularMotorVelocity / (m_angularMotorDecayTimescale / pTimestep); + if (m_angularMotorVelocity.LengthSquared() < 0.00001) + m_angularMotorVelocity = Vector3.Zero; } // end motor section // Vertical attractor section @@ -786,7 +790,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin vertattr.X += bounce * angularVelocity.X; vertattr.Y += bounce * angularVelocity.Y; - DetailLog("{0},MoveAngular,verticalAttraction,verterr={1},bounce={2},vertattr={3}", + VDetailLog("{0},MoveAngular,verticalAttraction,verterr={1},bounce={2},vertattr={3}", m_prim.LocalID, verterr, bounce, vertattr); } // else vertical attractor is off @@ -804,13 +808,13 @@ namespace OpenSim.Region.Physics.BulletSPlugin { m_lastAngularVelocity.X = 0; m_lastAngularVelocity.Y = 0; - DetailLog("{0},MoveAngular,noDeflectionUp,lastAngular={1}", m_prim.LocalID, m_lastAngularVelocity); + VDetailLog("{0},MoveAngular,noDeflectionUp,lastAngular={1}", m_prim.LocalID, m_lastAngularVelocity); } if (m_lastAngularVelocity.ApproxEquals(Vector3.Zero, 0.01f)) { m_lastAngularVelocity = Vector3.Zero; // Reduce small value to zero. - DetailLog("{0},MoveAngular,zeroSmallValues,lastAngular={1}", m_prim.LocalID, m_lastAngularVelocity); + VDetailLog("{0},MoveAngular,zeroSmallValues,lastAngular={1}", m_prim.LocalID, m_lastAngularVelocity); } // apply friction @@ -820,7 +824,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin // Apply to the body m_prim.RotationalVelocity = m_lastAngularVelocity; - DetailLog("{0},MoveAngular,done,decay={1},lastAngular={2}", m_prim.LocalID, decayamount, m_lastAngularVelocity); + VDetailLog("{0},MoveAngular,done,decay={1},lastAngular={2}", m_prim.LocalID, decayamount, m_lastAngularVelocity); } //end MoveAngular internal void LimitRotation(float timestep) @@ -867,11 +871,11 @@ namespace OpenSim.Region.Physics.BulletSPlugin if (changed) m_prim.Orientation = m_rot; - DetailLog("{0},LimitRotation,done,changed={1},orig={2},new={3}", m_prim.LocalID, changed, rotq, m_rot); + VDetailLog("{0},LimitRotation,done,changed={1},orig={2},new={3}", m_prim.LocalID, changed, rotq, m_rot); } // Invoke the detailed logger and output something if it's enabled. - private void DetailLog(string msg, params Object[] args) + private void VDetailLog(string msg, params Object[] args) { if (m_prim.Scene.VehicleLoggingEnabled) m_prim.Scene.PhysicsLogging.Write(msg, args); diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSPrim.cs b/OpenSim/Region/Physics/BulletSPlugin/BSPrim.cs index c157669..b918f84 100644 --- a/OpenSim/Region/Physics/BulletSPlugin/BSPrim.cs +++ b/OpenSim/Region/Physics/BulletSPlugin/BSPrim.cs @@ -141,8 +141,8 @@ public sealed class BSPrim : PhysicsActor _friction = _scene.Params.defaultFriction; // TODO: compute based on object material _density = _scene.Params.defaultDensity; // TODO: compute based on object material _restitution = _scene.Params.defaultRestitution; - _linkset = new BSLinkset(_scene, this); // a linkset of one - _vehicle = new BSDynamics(this); // add vehicleness + _linkset = new BSLinkset(Scene, this); // a linkset of one + _vehicle = new BSDynamics(Scene, this); // add vehicleness _mass = CalculateMass(); // do the actual object creation at taint time DetailLog("{0},BSPrim.constructor,call", LocalID); @@ -354,7 +354,7 @@ public sealed class BSPrim : PhysicsActor { // Done at taint time so we're sure the physics engine is not using the variables // Vehicle code changes the parameters for this vehicle type. - _vehicle.ProcessTypeChange(type); + _vehicle.ProcessTypeChange(type, Scene.LastSimulatedTimestep); // Tell the scene about the vehicle so it will get processing each frame. _scene.VehicleInSceneTypeChanged(this, type); }); -- cgit v1.1