aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/OpenSim (unfollow)
Commit message (Collapse)AuthorFilesLines
2013-02-08Adds size limits to JsonStore. Adds a separate configurationMic Bowman2-2/+66
variable to enable binding to dynamic attributes.
2013-02-08Don't allow exceptions to propogate from FlotsamAssetCache which may occur ↵Justin Clark-Casey (justincc)1-32/+57
when deleting expired files or stamping the region status file. Changes various error level log lines to warn since these are not fatal to the operation of OpenSimulator
2013-02-08Fix the return values for JsonDestroyStore, JsonRemoveValue, and JsonSetValue.Mic Bowman3-10/+17
Fix the link message status when reading a notecard.
2013-02-08If a component of a coalesced object fails to deserialization, do not add a ↵Justin Clark-Casey (justincc)1-4/+18
null where the object should be. This prevents a later load IAR failure. This code is currently only used by IAR loading.
2013-02-08On IAR loading, if loading of a coaleseced item entirely fails, then ↵Justin Clark-Casey (justincc)1-0/+18
continue with the IAR load rather than failing completely.
2013-02-08Refine TestJsonReadNotecard() and use / instead of . to separate paths.Justin Clark-Casey (justincc)1-15/+46
An attack of the stupid meant that I was using / as a path separator. Fixing this makes the tests behave better, though still with some questions. Also, I imagine / shouldn't really put data in the root as that's not a valid identifier. This commit also fix the / mistake in other tests those this does not affect their outcomes.
2013-02-07BulletSim: Adapt BulletSim to the newer physical properties. ViewerRobert Adams2-30/+28
dialog setting of friction, restitution, ... working.
2013-02-07BulletSim: fix exceptions caused by setting physical properties before the ↵Robert Adams1-5/+10
prim body is initialized.
2013-02-07BulletSim: add user setting of friction, density and restitution.Robert Adams3-27/+94
2013-02-08Extend TestJsonReadNotecard() for reads to non-root locations and fake stores.Justin Clark-Casey (justincc)1-9/+33
Assertions for loading to non-root paths are currently commented out because this doesn't seem to be working. Will be raising mantis to resolve.
2013-02-08Stop wrongly create a receiving store already populated with "Hello":"World" ↵Justin Clark-Casey (justincc)1-1/+3
in TestJsonReadNotecard()
2013-02-08Extend TestJsonWriteNotecard() regression test for cases with fake paths and ↵Justin Clark-Casey (justincc)1-8/+61
fake stores. Also separates out TestJsonWriteReadNotecard() into separate write and read tests
2013-02-08Extend TestJsonSetValue() regressio ntes tto test against a fake storeJustin Clark-Casey (justincc)1-0/+5
2013-02-08Extend TestJsonTestPath() regression test with checks against fake values ↵Justin Clark-Casey (justincc)1-0/+8
and fake stores
2013-02-07Add tests for removing fake values/from fake store in TestJsonRemoveValue()Justin Clark-Casey (justincc)1-0/+11
Again, need to check if returning true for removing a value that doesn't exist is most appropriate.
2013-02-07Add testing for getting non-existing values and values from a non-existing ↵Justin Clark-Casey (justincc)1-1/+10
datastore to TestJsonGetValue()
2013-02-07Actually plumb the new values to physics.Melanie1-0/+20
2013-02-07Add TestJsonDestoreStoreNotExists()Justin Clark-Casey (justincc)1-0/+14
This still returns true even if we ask to destroy a store that does not exist. Need to check that this is more appropriate behaviour.
2013-02-07Add some more code from Avination. This changes physics actor stuff aroundMelanie3-40/+165
to work with the new params. Not actually plumbed just yet.
2013-02-07Fix a recent regression in e17392a where JsonSetValue() stopped working ↵Justin Clark-Casey (justincc)3-15/+15
(probably other functions as well). Fix is to call through to the no-arg constructor from the string constructor in JsonStore, which I suspect was just forgotten. This was actually picked up by the TestJsonSetValue() regression test failing But this isn't being run on jenkins due to the .net version issue. This commit also puts the full stack trace in logged messages and makes these error level messages instead of info
2013-02-07Plumb the path from the client to the extra physics params and backMelanie10-7/+127
2013-02-07Send the new physics params to the viewer build dialogMelanie1-0/+35
2013-02-07Revert "Add plumbing for physics properties to get to the physics engine."Melanie2-55/+6
This reverts commit c658fa1c0dd83f23c66ccfedb12e8ab02ff01d0a.
2013-02-07Add plumbing for physics properties to get to the physics engine.Robert Adams2-6/+55
Addition of entries to PhysicsActor and setting code in SceneObjectPart.
2013-02-07Change passed PhysicsParameter value from float to the more general string valueRobert Adams4-43/+57
2013-02-07Websocket Echo module should not be on by default.teravus1-1/+1
2013-02-07* missing example module.. Oops.teravus1-0/+174
2013-02-07This is the final commit that enables the Websocket handlerteravus2-2/+1095
2013-02-07Rename "Bounciness" to "Restitution"Melanie4-9/+9
2013-02-07Add TestJsonWriteReadNotecard() regression testJustin Clark-Casey (justincc)2-2/+45
2013-02-06Enables script access to the per object dynamic attributes through the JsonStoreMic Bowman5-13/+104
script functions. Adds JsonAttachObjectStore to associate a store identifier with an object (scripts can only access the store in their host object, this could be extended but isn't necessary for now). Note this opens a method to the DAMap OSDMap. This will be removed later, but greatly simplifies the code for now. The JsonStore and these scripts are disabled by default.
2013-02-07Make json store tests operate on a single thread to ensure we don't run into ↵Justin Clark-Casey (justincc)1-0/+16
any race related test failures in the future.
2013-02-06WebStats will now use actual logfile as specified in OpenSim.exe.config ↵Dan Lake2-2/+16
rather than hardcoded ./OpenSim.log. This allows for rotating logs and other file appender types
2013-02-07minor: add method doc to DAMap.ValidateKey()Justin Clark-Casey (justincc)1-0/+4
2013-02-07Add key length validation to DAMap.Add(KeyValuePair<string, OSDMap> kvp) to ↵Justin Clark-Casey (justincc)1-1/+2
match Add(string key, OSDMap store)
2013-02-06BulletSim: set removing zero width triangles in meshes to be enabled by ↵Robert Adams2-1/+2
default. This should fix the invisible barrier in sculptie doorways bug.
2013-02-06BulletSim: check for completely degenerate meshes (ones with allRobert Adams1-9/+19
triangles having zero width) and output an error rather than throwing and exception.
2013-02-06BulletSim: remove an exception which occurs if a physics meshRobert Adams1-2/+4
asset is not found.
2013-02-06Fix a bug I brought in by manually editing a diff file. Terrain is if cource ↵Melanie1-1/+1
not always at 20m.
2013-02-06Partial port of Avination's support for the new physics parameters.Melanie7-21/+264
Implements the parameters as properties, the serialization and database storage (MySQL only). Implements llSetPrimitiveParams for prim physics shape and the other 4 extra params. Only the prim shape type "None" is currently functional. No support for the Viewer UI (yet), that will be ported in due course. Lots more to port, this is a large-ish changeset.
2013-02-06Remove long unused Scene.DumpAssetsToFile boolean.Justin Clark-Casey (justincc)4-9/+3
2013-02-06Remove very long unused IScriptHost and NullScriptHostJustin Clark-Casey (justincc)3-138/+1
2013-02-06Remove unused ScriptEngineLoader and ScriptEngineInterface in ↵Justin Clark-Casey (justincc)3-168/+0
OpenSim.Region.Framework.dll I believe this predates the generic system of registering interfaces and is very long unused.
2013-02-06Remove wrong code in ScriptUtils.GetAssetIdFromKeyOrItemName which would ↵Justin Clark-Casey (justincc)1-15/+0
return the item ID instead of the asset ID if the identifier was a uuid that matched an inventory item name. This would practically never happen. This makes this overloaded version of the function consistent with the other version. It looks like this accidentally came over in commit c5af16a from Tue Oct 16 12:40:21 2012 However, there's arguably a case for looking for an item name that matches a UUID before assuming that the identifier is already an asset ID.
2013-02-06Allow JsonReadNotecard() to accept the name of the notecard as well as the ↵Justin Clark-Casey (justincc)1-8/+18
asset ID. Agreed in discussion with cmickeyb. This is to make this consistent with similar existing LSL/OSSL functions such as llTriggerSound() and osNpcLoadAppearance() that allow an item name or an asset id.
2013-02-05BulletSim: make removing zero width triangles from meshes optionalRobert Adams2-24/+33
and, for the moment, default to 'off'.
2013-02-06refactor: Move functions that lookup asset ids from task inventory or pass ↵Justin Clark-Casey (justincc)2-89/+137
them through to ScriptUtils class in OpenSim.Region.Framework.dll Renames functions to better reflect what they do. This is so that code registering with modInvoke() can reuse this code to provide functions that behave in a consistent manner with existing LSL/OSSL functions.
2013-02-05BulletSim: remove degenerate triangles from meshes. This fixes theRobert Adams5-45/+59
invisible barriers in sculptie doorways (Mantis 6529). Bump up level-of-detail for physical meshes to 32 (the max). This fixes the invisible barriers that showed up in prim cut arches. NOTE: the default LOD values are removed from OpenSimDefaults.ini. If you don't change your OpenSimDefaults.ini, you will continue to see the arch problem.
2013-02-05BulletSim: add debugging looking for doorway sculpty problemsRobert Adams3-4/+33
2013-02-05BulletSim: rework some parameter setting implementation moving functionality ↵Robert Adams5-158/+152
that was in BSScene to BSParam. Remove unused parameters that were passed to the unmanaged code. Update DLLs and SOs for the new param block.
generated by cgit v1.1 at 2024-12-23 19:47:51 +0000