aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/OpenSim/Region (unfollow)
Commit message (Collapse)AuthorFilesLines
2011-11-10Fix compile error from an earlier commitDan Lake1-2/+0
2011-11-10In SOP, replaced many references to private members with the public propertiesDan Lake1-243/+233
2011-11-11Prevent linking objects while they are deeded. On unlinking deeded objects,Melanie1-4/+19
set LastOwnerID properly so the parts cannot be transferred, circumventing no trans perms
2011-11-10Fix turn left and turn right properly. Works for both built-ins and LSL AOsMelanie2-6/+16
2011-11-10Cleaned UpdatePermissions calls on SOP and SOG to eliminate redundant ↵Dan Lake2-19/+15
properties packet sends and so one part is not telling a different part what to do. That should be up to the SOG to manage permissions on its parts and notify clients when one of them changes.
2011-11-10Implement nudging support for strafing motionMelanie1-2/+4
2011-11-10Alter commit 3758306 to allow region name to be substituted within a region ↵Justin Clark-Casey (justincc)1-3/+28
console prompt This is to allow broader subsitution in the future. Currently, the only substitions are \R (for region name) and \\ (for a single backslash) e.g. "Region (\R) " is the current and continuing default prompt This renames custom_prompt in [Startup] to ConsolePrompt
2011-11-10When updating SOG, a physics taint should not override a full update with a ↵Dan Lake1-10/+15
terse update
2011-11-10convert tabs from commit 3758306 to spacesJustin Clark-Casey (justincc)1-3/+6
2011-11-10Fix misaligned sit animation on scripted sit caused by the default sitMelanie1-2/+6
animation being run after the scripted one.
2011-11-10Allow custom setting for the console promptGuduleLapointe1-2/+3
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2011-11-09minor: Correct misleading method doc on SOG.UpdateRootRotation()Justin Clark-Casey (justincc)1-1/+1
2011-11-07Correct test failure in sit position check of TestSitAndStandWithNoTarget()Justin Clark-Casey (justincc)1-1/+3
Curiously, a Vector3.ToString() will not display the last two places of the float. In this case, the failure of the assertion would confusingly report Expected: <0, 0, 0.8454993> But was: <0, 0, 0.8454993> when actual Z figure is 0.845499337 Should fully address http://opensimulator.org/mantis/view.php?id=5779
2011-11-07That such a trivial change can be so difficult to get right. Fix it this time.Melanie1-1/+1
2011-11-07Fix build breakMelanie1-1/+1
2011-11-06Fix up failing test to compensate for changed sit target offsetMelanie1-2/+2
2011-11-06Make the AsyncSceneObjectDeleter send a list of kills. This will make largeMelanie1-1/+7
marquee-selected deletions of single prims or small link sets nearly instantaneous
2011-11-06Convert SendKillObject to take a list of uint rather than sending oneMelanie8-49/+50
packet per prim. More to come as we change to make use of this.
2011-11-06Allow HG and other scene presences not linked to a user account to function.Melanie1-1/+4
2011-11-06HUD attachments: Removes some more messages sent to wrong clients.Snoopy Pfeffer1-1/+10
2011-11-05Fix build breakMelanie1-1/+1
2011-11-05Remove spammy autopilot debugMelanie1-3/+3
2011-11-05Remove some left over debug and reverse experimental reordering of ifsMelanie1-4/+2
2011-11-05Remove enableprejump config option and associated code as this is nowMelanie1-3/+0
fully functional and cannot be disabled because that would break timings.
2011-11-05Porting the ScenePresenceAnimator from Avination. Jump and fall anims now workMelanie2-87/+136
properly.
2011-11-05Change puvlic m_ variable to a getter propertyMelanie1-1/+5
2011-11-05ScenePresence part of the Avination animator fixes.Melanie1-3/+58
2011-11-05Chnaging the sit target adjustment to a more precise approximation of SL. ↵Melanie1-24/+35
Some small fixes ported from Avination. Some white space fixes.
2011-11-05Fix avatar height, removes the hip offset hacknebadon1-3/+0
Author: Mana Janus <mana@mjm-labs.com>
2011-11-05Don't rotate child prims, if only the root prim is rotated.nebadon1-2/+2
2011-11-05refactor: In sit code, compare against Vector3.Zero and Quaternion.Identity ↵Justin Clark-Casey (justincc)1-12/+12
instead of individual components of a vector/quat
2011-11-05Fix NPC sitting for prims without a sit target.Justin Clark-Casey (justincc)4-14/+61
This is to partially address http://opensimulator.org/mantis/view.php?id=5769 We don't need to call SP.HandleAgentSit() again if we are within 10m since the autopilot won't trigger. By calling it twice, the position of the sitting NPC was wrongly adjusted, ending up near <0,0,0>. However, this change does mean that NPCs further than 10m away will not attempt to autopilot to the prim, though this code was broken anyway (is actually a different mechanism to normal NPC movmeent). Hopefully this can be addressed soon.
2011-11-05Replacing te linking code with the code from Avination. Link sets prims are nowMelanie2-36/+12
numbered properly even when sets are linked to sets.
2011-11-04Add comment for experimental effect of removing the Thread.Sleep(20) in ↵Justin Clark-Casey (justincc)2-1/+4
ODEPrim.changevelocity()
2011-11-04On standup, trigger the changed link script event after the avatar has been ↵Justin Clark-Casey (justincc)1-2/+3
fully changed. This was meant to help with the script in http://opensimulator.org/mantis/view.php?id=5772 but it doesn't work. Probably the event is fired before the physics actor has been set up again for the stood avatar. Fixing that would be much more complicated, but processing the event last of all seems like a good idea in any case.
2011-11-04Stop llPushObject() from causing problems by adding force via a taint rather ↵Justin Clark-Casey (justincc)1-2/+25
than directly. This isn't a perfect solution since there can be a race between the taint processing and taint setting, as force needs to be reset after processing. Needs careful locking in the future.
2011-11-03Rename ForEachAvatar back to ForEachScenePresence. The other changesDan Lake15-34/+34
from previous commit which sort out which iterator is used are left intact. A discussion is needed as to what constitutes an avatar vs a ScenePresence.
2011-11-03Renamed ForEachRootScenePresence to ForEachAvatar. Cleaned up calls toDan Lake22-153/+120
the 3 iteration functions so more of them are using the correct iteration for the action they are performing. The 3 iterators that seem to fit all actions within OpenSim at this time are: ForEachAvatar: Perform an action on all avatars (root presences) ForEachClient: Perform an action on all clients (root or child clients) ForEachRootClient: Perform an action on all clients that have an avatar There are still a dozen places or so calling the old ForEachScenePresence that will take a little more refactoring to eliminate.
2011-11-02Port the Avination offline messaging system to CoreMelanie4-23/+37
2011-11-02Changes UpdateFlag in SOP to an enumeration of NONE, TERSE and FULL.Dan Lake10-87/+77
UpdateFlag is now referenced/used only within SOP and SOG. Outsiders are using ScheduleFullUpdate, ScheduleTerseUpdate or ClearUpdateSchedule on SOP consistently now. Also started working toward eliminating those calls to ScheduleFullUpdate, ScheduleTerseUpdate or ClearUpdateSchedule from outside SOP in favor of just setting properties on SOP and let SOP decide if an update should be scheduled. This consolidates the update policy within SOP and the client rather than everywhere that makes changes to SOP. Some places forget to call update while others call it multiple times, "just to be sure". UpdateFlag and Schedule*Update will both be made private shortly. UpdateFlag is intended to be transient and internal to SOP so it has been removed from XML serializer for SOPs.
2011-11-02Change default say distance to 20m from 30m, the same as on the big grid. ↵Justin Clark-Casey (justincc)2-2/+2
This is to improve the migration of scripts that expect a 20m say distance. If you want to keep a 30m say distance then please set this as the say_distance parameter in the [Chat] section of OpenSim.ini.
2011-11-02Get some hopefully more useful exception information when ↵Justin Clark-Casey (justincc)2-5/+8
OpenJPEG.EncodeFromImage() fails in VectorRender and DynamicTexture modules
2011-11-02Fix race condition that would sometimes send or save appearance for the ↵Justin Clark-Casey (justincc)2-9/+24
wrong avatar. In AvatarFactoryModule.HandleAppearanceUpdateTimer(), we loop through appearance save and send requests and dispatch via a FireAndForget thread. If there was more than one request in the save or send queue, then this led to a subtle race condition where the foreach loop would load in the next KeyValuePair before the thread was dispatched. This gave the thread the wrong avatar ID, leaving some avatar appearance cloudy since appearance data was never sent. This change loads the fields into local references so that this doesn't happen.
2011-11-02Restore the recursive calling of PRIM_LINK_TARGET because the version I madeMelanie1-327/+334
breaks LINK_SET et al.
2011-11-02Some positioning fixes from AVN trunkMelanie1-1/+42
2011-11-02Streamline PRIM_LINK_TARGET, eliminating a recursion and a failure scenarioMelanie1-4/+3
2011-11-01Removed redundant SceneContents property from Scene. It's the same as ↵Dan Lake2-6/+1
SceneGraph property.
2011-11-01Part 2 of see_into_this_sim_from_neighbor configuration option removalDan Lake1-10/+7
2011-11-01Removed see_into_this_sim_from_neighbor configuration option.Dan Lake2-11/+1
2011-11-01Add "appearance send" command to allow manual sending of appearance.Justin Clark-Casey (justincc)2-4/+21
generated by cgit v1.1 at 2024-12-20 13:54:32 +0000