aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/OpenSim/Region/Physics (unfollow)
Commit message (Collapse)AuthorFilesLines
2012-12-03BulletSim: Reduce idle region physics overhead where there are MANYRobert Adams7-80/+95
static objects by more restrictive selection of objects that collide with static objects. Rename collision mask fuctions from 'filter' to 'group' so it is clear what is being set. Rename BulletSimAPI.SetCollisionFilterMask() to SetCollisionGroupMask to match above. Restore passing of time step to linear and angular motion component routines. Use buffering vehicle physical parameter get/set routines consistantly. Make range enforcement clearer by using ClampInRange() function for parameter setting. Remove commented out experimental vehicle calculations.
2012-12-03BulletSim: rework angular corrections to remove any hybrid code and compute ↵Robert Adams4-111/+115
absolute collections.
2012-12-03BulletSim: add stubs for generalization of preStep actions. Will eventually ↵Robert Adams2-3/+22
replace the specialized vehicle processing with preStep event processing. Add TODO comments about this feature. Redo line endings in TODO file to be all Linux.
2012-12-03BulletSim: begin tracking a TODO list. There just are so many things to ↵Robert Adams1-0/+112
remember to do.
2012-12-03BulletSim: revert angular vertical attraction from motor to code. The motor ↵Robert Adams1-47/+19
code did not return the restoring difference but the current value. Remove unused commented out code.
2012-12-03BulletSim: format vehicle detail logging messages so vehicle changs are ↵Robert Adams2-17/+17
grouped better in the log output.
2012-12-03BulletSim: localize vehicle property setting so the vehicle prim is only ↵Robert Adams1-33/+128
updated at the end of the vehicle simulation step and the push of the physics property update event only happens if the properties are actually changed.
2012-12-01BulletSim: Add DumpActivationInfo2 function. Change static objects from ↵Robert Adams4-10/+15
DISABLE_SIMULATION to ISLAND_SLEEPING. Update DLLs and SOs to add DumpActivationInfo2 function.
2012-11-29BulletSim: remove time scaling of computed vehicle absolute velocity since ↵Robert Adams3-48/+73
Bullet will scale the movement by the time slice. Restore LIMIT_MOTOR_UP to definitition of BOAT simce some vehicle engines use it even for land vehicles. Push vehicle parameter updates through the regular property update to solve vehicles floating off when they should be stopped.
2012-11-29BulletSim: add copyright header where it is missing. Remove some unnecessary ↵Robert Adams2-3/+31
'using' requirements so testing framework is less complicated.
2012-11-29BulletSim: add expanded call to IMesher/Meshmerizer which enables/disables ↵Robert Adams4-10/+26
mesh caching. Since BulletSim caches and tracks the unmanaged memory version of meshes, the Meshmerizer itself does not need to cache built meshes once BulletSim has made the physical proxy mesh.
2012-11-29BulletSim: reverse direction of hover correction. Removes problem with ↵Robert Adams1-8/+8
vehicles being orbited.
2012-11-28BulletSim: fix boats floating low by removing LIMIT_MOTOR_UP flag from ↵Robert Adams1-3/+15
TYPE_BOAT definition.
2012-11-28BulletSim: move GetWaterLevelAtXYZ from BSScene to BSPhysTerrain.Robert Adams7-22/+63
2012-11-28Stop logging spurious asset data for {0} is zero length error for sculpts/meshJustin Clark-Casey (justincc)2-1/+9
ODEPrim, for instance, always hits this code path twice at the moment Firstly before any sculpt data has been loaded (hence the spurious message) Secondly when any sculpt data has been loaded or failed to load (when the message would be valid). Hence comment this out and rely on the message in ODEPrim.MeshAssetReceived() instead (though this is not ideal since it requires all physics plugins to copy/paste similar code).
2012-11-27BulletSim: reorganize linear movement routine into separate subroutines ↵Robert Adams1-58/+79
enabling external calibration routines and unit tests.
2012-11-27BulletSim: fix terrain mesh generation for problem with regions that have ↵Robert Adams1-6/+16
unequal edge heights. Thanks UBit.
2012-11-27BulletSim: reorganize angular movement routine into separate subroutines ↵Robert Adams1-95/+114
enabling external calibration routines and unit testing.
2012-11-27BulletSim: implementation of vertical attraction motor.Robert Adams1-41/+62
2012-11-27BulletSim: add 'infinite' timescale that does not reduce motor target or ↵Robert Adams1-10/+27
friction.
2012-11-26BulletSim: increase vehicle stability by suppressing Bullet's update to ↵Robert Adams4-59/+26
angular velocity.
2012-11-25BulletSim: use m_angularMotor to do the basic movement. Add the setting of ↵Robert Adams1-60/+64
same. Rename the angular forces and add comments to match MoveAngular to the form of MoveLinear.
2012-11-25BulletSim: up the vehicle angular damping to 0.95. Still trying to overcome ↵Robert Adams1-2/+2
the movement added by Bullet.
2012-11-25BulletSim: organize MoveLinear code for understandability. Make ↵Robert Adams1-89/+40
LIMIT_MOTOR_UP contribution a velocity and not a force.
2012-11-25BulletSim: add ToString override to BSVMotor.Robert Adams1-1/+6
2012-11-25BulletSim: add BSVMotor as BSDynamics linear motor.Robert Adams2-27/+74
Properly limit *_MOTOR_DECAY_TIMESCALE to 120 as per specs. Invode BSDynamics.Refresh() when vehicle type is changed. Previously the vehicle properties weren't getting set because the physical properties were set before the vehicle type was set. Add a "use name" to BSMotors for identification while debugging. Correct current and target confusion in BSVMotor design. Rename CurrentValueReductionTimescale to FrictionTimescale. Event more detailed logging.
2012-11-25BulletSim: clean up TODO list. It is kept somewhere wlse that should be more ↵Robert Adams2-18/+17
public. Add error logging for the detail log writer so a message is output when it cannot write to the specified logging directory. Modify friction defaults to be closer to ODE's values. Add new collision margin and vehicle angular damping parameters.
2012-11-25BulletSim: small change to add position correction force with AddForce ↵Robert Adams2-16/+22
rather than just storing it in the variable
2012-11-25BulletSim: complete vector motor. Correct line endings.Robert Adams1-104/+129
2012-11-25BulletSim: add terrain collision margin and vehicle angular dampingRobert Adams1-0/+7
parameters to the parameter block. New API call for setting collision margin.
2012-11-25BulletSim: add parameter for terrain collision margin.Robert Adams3-54/+45
Add locking around unlikely but possible race conditions on terrain list.
2012-11-25BulletSim: Add tables and initialization for different attributes for ↵Robert Adams2-0/+198
different materials. For the moment, the per material tables are not used.
2012-11-24Consistenly make NUnit test cases inherit from OpenSimTestCase which ↵Justin Clark-Casey (justincc)1-1/+2
automatically turns off any logging enabled between tests
2012-11-22Rename BulletSim's PhysicsShapeType to BSPhysicsShapeType because itMelanie11-54/+54
conflicts with PhysicsShape type defined in later libOMV
2012-11-21BulletSim: Make avatar capsule so it is not circular.Robert Adams6-21/+39
Simple attempt to make avatars better shaped. Replace parameter 'avatarCapsuleRadius' with 'avatarCapsuleWidth' and 'avatarCapsuleDepth'. More tweeking to avatar height calculation. A little better but short avatar's feet are above the terrain and tall avatar's feet are a little below the ground.
2012-11-21BulletSim: Properly position mesh terrain on creation (fixes terrain not ↵Robert Adams2-76/+44
appearing to be working). Centralize terrain shape creation logic. Remove very chatty detail log messages.
2012-11-21BulletSim: add terrainImplementation parameter with default to Mesh.Robert Adams3-5/+46
2012-11-21BulletSim: fix line endings to be all Linux style (windows style keeps ↵Robert Adams2-454/+454
creeping in)
2012-11-21BulletSim: enablement and debugging of mesh terrain.Robert Adams4-36/+253
2012-11-21BulletSim: pull heightmap implementation out of the terrain manager so a ↵Robert Adams4-181/+327
mesh terrain can be implemented.
2012-11-21BulletSim: rename SHAPE_AVATAR to SHAPE_CAPSULE with the eye to eventually ↵Robert Adams4-8/+8
having mesh avatars.
2012-11-21BulletSim: uplevel FixedShapeKey out of ShapeData structure (since it is ↵Robert Adams3-20/+22
getting simplified out of existance someday) and update all the references to same.
2012-11-21BulletSim: uplevel PhysicsShapeType out of ShapeData structure (since it is ↵Robert Adams9-66/+67
getting simplified out of existance someday) and update all the references to that enum.
2012-11-21BulletSim: change PositionSanityCheck to apply a force to correct position ↵Robert Adams2-33/+30
corrections (below ground and floating).
2012-11-21BulletSim: tweek avatar capsule parameters so avatar feet don't go below ↵Robert Adams2-8/+10
ground. This solves the bouncing, short avatar problem (Mantis 6403).
2012-11-18BulletSim: Use base class constructors for initialization of BSShape and ↵Robert Adams4-216/+214
other classes.
2012-11-18BulletSim: fix the problem with flying being disabled when crossing region ↵Robert Adams1-2/+6
boundries.
2012-11-18BulletSim: remove the obsolete interface to the Bullet code. Update ↵Robert Adams1-134/+0
BulletSim libraries with code stripped of the obsolete code.
2012-11-14Added AssemblyInfos to every dll in the OpenSim.Region namespace.Diva Canto6-4/+70
2012-11-13Updated all existing AssemblyVersions's to 0.7.5.*. Many DLLs still don't ↵Diva Canto5-5/+5
have an AssemblyInfo file.
generated by cgit v1.1 at 2024-12-21 12:21:36 +0000