aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/OpenSim/Region/Physics/UbitMeshing/Meshmerizer.cs (unfollow)
Commit message (Collapse)AuthorFilesLines
2012-04-16Downgrade an error log message to info because there is nothing we can do ifMelanie1-1/+1
an asset is damaged so it should not spew red ink.
2012-03-21minor cleanUbitUmarov1-27/+24
2012-03-21add convex state to mesh key, so a change is detected.UbitUmarov1-1/+1
2012-03-21let convex be a parameter to createMesh so it can be used. Was forced to add ↵UbitUmarov1-7/+10
it also to original mesher code and zeromesher
2012-03-20 added convex decomposition hulls support. Hardcoded to use mesh or this. ↵UbitUmarov1-18/+146
(so no simple hull of convex prims for now).
2012-03-20WORK in progress!! Now it reads the simple hull shape to use if convex shape ↵UbitUmarov1-22/+158
is selected for a prim. Due to ODE limitations on convex hulls colisions, it creates a mesh. Being work in progress it is hardcoded to only read that simple convex hull for now. It writes a file named "lixo_lixo.raw" that can be imported into blender for examination of the created mesh (the last one loaded and also hardcoded). To play with put in opensim.ini "meshing = UbitMeshmerizer"
2012-03-17 added a new UbitMeshing module so i can mess it...UbitUmarov1-1/+1
2012-02-16Comment out "experimental" log message printed out whenever a physics mesh ↵Justin Clark-Casey (justincc)1-2/+2
was generated for a mesh Also adds prim name to the "no asset data" error log message
2012-02-11Use mesh to estimate real center of prims if avaiable. Let sculpt map ↵UbitUmarov1-3/+18
textures with alpha channel work. On linux J2DecodeCache folder must be deleted to remove bad entries. Corrently this can't be cached on linux (mono/ cairo/? problem)
2011-11-29minor: remove mono compile warning, a Vector3 can never be null since it's a ↵Justin Clark-Casey (justincc)1-9/+6
struct
2011-08-28Move GetMeshKey from buried inside Meshmerizer to a public method on ↵Robert Adams1-62/+1
PrimitiveBaseShape Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2011-08-28Add level of detail specification to optionally reduce the number of ↵Robert Adams1-5/+31
vertices in generated prim meshes Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2011-07-30refactor: extract method that generates a physics mesh from prim shape dataJustin Clark-Casey (justincc)1-117/+141
2011-07-30refactor: extract code which generate points and faces from sculpt data into ↵Justin Clark-Casey (justincc)1-220/+240
it's own method. fix build break.
2011-07-30fix bug in previous commitJustin Clark-Casey (justincc)1-1/+2
2011-07-30refactor: move the code that generates physics meshs from prim mesh data ↵Justin Clark-Casey (justincc)1-99/+123
into a separate method, in order to make the code more readable.
2011-07-29Return null from CreateMeshFromPrimMesher if OpenJPEG decoding of the sculpt ↵Justin Clark-Casey (justincc)1-1/+11
data fails. This is to address http://opensimulator.org/mantis/view.php?id=5612
2011-07-16Fix physics proxy regeneration when a mesh with more than one submesh is resizedJustin Clark-Casey (justincc)1-1/+4
Addresses http://opensimulator.org/mantis/view.php?id=5584
2011-07-11minor Tack the prim name on the end of the "experimental mesh proxy ↵Justin Clark-Casey (justincc)1-1/+1
generation" message. Can probably comment out this message soon, once a few other issues are tidied up.
2011-07-09minor: code tidy and inserted log lines for future use.Justin Clark-Casey (justincc)1-2/+3
Unable to get to the bottom of why resizing a mesh fails to properly reset the physics proxy, when toggling phantom does After a mesh is generated, the existing sculptdata is set to zero in PrimitiveBaseShape to save memory When phantom is toggled, the sculptdata is regenerated before remeshing. But on resize, the sculptdata is not regenerated. So clearly, resetting sculptdata is possible, but haven't quite been able to pin down how this is being done when phantom is toggled.
2011-07-08refactor: eliminate redundant return statementJustin Clark-Casey (justincc)1-3/+1
2011-07-08refactor: Factor out AddSubMesh() method from long ↵Justin Clark-Casey (justincc)1-44/+53
CraeteMeshFromPrimMesher() method Also remove some of the logging spam left in from the last commit.
2011-07-08Fix interpretation of physics mesh proxies from mesh dataJustin Clark-Casey (justincc)1-0/+10
As per http://wiki.secondlife.com/wiki/Mesh/Mesh_Asset_Format, some submesh blocks may just have the flag "NoGeometry" to signal that they provide no mesh data. If a block contains this, ignore it for meshing purposes rather than suffer a ClassCastException This fixes physics proxy meshing, so you can now walk through mesh doorways, properly stand on the trailer of mesh trucks, etc. To get mesh physics proxy, the UseMeshiesPhysicsMesh must be true in a [Mesh] config section in OpenSim.ini (example in OpenSimDefaults.ini). Convex hull physics not currently supported.
2011-07-08minor: commented out log lines for future use and very small code tidyJustin Clark-Casey (justincc)1-0/+2
2011-06-29Allow physics proxy generation for meshes using new asset format.dahlia1-4/+17
Fix an invalid cast exception while decoding new mesh asset format.
2011-06-10partial update for new mesh asset format - handle both old and new formats ↵dahlia1-1/+5
for physics mesh
2011-04-29Fix crash when [Mesh] section is missing from configuration filesDan Lake1-1/+2
2011-04-21Group collada meshies settings under [Mesh] in OpensimDefaults.iniBlueWall1-1/+2
2010-12-10minor: remove some compiler warningsJustin Clark-Casey (justincc)1-1/+1
2010-11-24catch an exception when a mesh asset header cant be decodeddahlia1-2/+9
2010-10-24* Updated libomv to r3461Latif Khalifa1-2/+2
Main reason for upgrade is to revert API change that was introduced in order to support headerless binary LLSD decoding needed for deserialization of the mesh assets, which turned out to be unnecessary as we can transparently decode both kinds.
2010-10-20fix combining of multiple physics submeshesdahlia1-3/+4
2010-10-18remove some cruft from last commitdahlia1-8/+0
2010-10-18initial support for meshies physics. Must set ini option ↵dahlia1-43/+94
UseMeshiesPhysicsMesh = true to enable. See file OpenSimDefaults.ini for example.
2010-10-15one more silly line ending thing.... *If you have problems, fetch the tree ↵Teravus Ovares (Dan Olivares)1-71/+71
and rebase. Signed-off-by: Teravus Ovares (Dan Olivares) <teravus@gmail.com>
2010-10-14one more silly line ending thing....Teravus Ovares (Dan Olivares)1-71/+71
*If you have problems, fetch the tree and rebase.
2010-10-14more work in progress on mesh physics - still non-functionaldahlia1-2/+67
2010-10-14laying some groundwork for mesh physicsdahlia1-70/+80
2010-10-09* Make line endings consistant in Meshmerizer.csTeravus Ovares (Dan Olivares)1-1/+1
2010-10-07add a flag in OpenSim.ini.example for enabling/disabling decoded sculpt map ↵dahlia1-1/+2
caching for meshing
2010-09-26Typo fixesMelanie1-6/+6
2010-09-26Typo fixesMelanie1-6/+6
2010-09-26Merge MasterMelanie1-4/+9
2010-09-26adding configurable j2kDecodeCache pathBlueWall1-4/+9
allowing the decoded sculpt map cache path to be defined in the configuration files. Use DecodedSculpMapPath in the [Startup] section to set the path. The default is still ./bin/j2kDecodeCache
2010-08-03Revert "Catch meshing error in Meshmerizer"Melanie Thielker1-15/+7
This reverts commit 8f2986bc6a438ea9f5de912a5b76a196e7933175. In favor of a fix that tells us where the issue is instead of eating the error
2010-08-02Catch meshing error in MeshmerizerTom1-7/+15
2009-10-28Switching sculpty from CSJ2K back to OpenJPEG for now until more kinks are ↵John Hurliman1-2/+6
ironed out
2009-10-28Print the exception message when CSJ2K decoding fails for sculpty texturesJohn Hurliman1-3/+3
2009-10-26* Switched from OpenJPEG to CSJ2K in MeshmerizerJohn Hurliman1-3/+1
* Tested the previous patch and found no regressions
2009-10-26Experimental change of PhysicsVector to Vector3. UntestedJohn Hurliman1-13/+8
generated by cgit v1.1 at 2024-12-22 14:38:29 +0000