aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/OpenSim/Region/Physics/OdePlugin/ODECharacter.cs (unfollow)
Commit message (Collapse)AuthorFilesLines
2014-11-29Somewhat improve avatar region crossings by properly preserving velocity ↵Justin Clark-Casey (justincc)1-1/+5
when avatar enters the new region. This commit addresses the following issues were causing velocity to be set to 0 on the new region, disrupting flight in particular * Full avatar updates contained no velocity information, which does appear to have some effect in testing. * BulletSim was always setting the velocity to 0 for the new BSCharacter. Now, physics engines take a velocity parameter when setting up characters so we can avoid this. This patch applies to both Bullet and ODE.
2014-11-19If calling llStopMoveToTarget() on an in-world prim, don't send an ↵Justin Clark-Casey1-1/+5
unnecessary object update if the prim was not moving to target. This involves making PhysicsActor.PIDActive get as well as set. On physics components that don't implement this (all characters and some phys engines) we return false.
2014-07-21Fixed avatar hovering above the ground. The avatar physics capsule was too tall.Oren Hurvitz1-2/+4
This is related to http://opensimulator.org/mantis/view.php?id=7067 . But that bug complains about BulletSim, and this fix is for ODE.
2014-07-18refactor: slightly adjust some code in ODECharacter.Move() to eliminate a ↵Justin Clark-Casey (justincc)1-18/+19
condition check without changing the logic
2014-07-18With ODE physics, fix an issue where the avatar couldn't jump and then move ↵Justin Clark-Casey (justincc)1-18/+5
forward when moving south or west. Addresses http://opensimulator.org/mantis/view.php?id=5003 Thanks to UbitUmarov for this fix.
2012-11-08ODECharacter overrides TargetVelocity. No change to existing behaviorDan Lake1-1/+15
2012-10-09Add config option to plant avatar where they are reducing avatar avatar ↵teravus1-2/+2
'pushability' av_planted see OpenSimDefaults.ini. Use when you have unruly visitors that rudely push each other around. Still allows a small amount of movement based on the avatar movement PID controller settings. You can increase the spring tension in the PID controller and really prevent any movement if you would like.
2012-06-29Fix a regression where we stopped removing avatars from collision event ↵Justin Clark-Casey (justincc)1-1/+1
reporting on logout, rather than stopping clearing their collision events. This occurred in b18c8c8 (Thu May 17 2012). This was a cause of very occasional race conditions and likely memory leakage as clients came and went from the region.
2012-05-18refactor: move EventQueueGet path generation into common method. Rename ↵Justin Clark-Casey (justincc)1-1/+1
some local variables in line with code conventions. Add commented out EQG log lines for future use.
2012-05-17Don't eagerly clear frame collision events when physics actors subscribe and ↵Justin Clark-Casey (justincc)1-2/+8
unsubscribe from collisions, in order to avoid a race condition. Since this is done directly from ScenePresence, it can lead to a race condition with the simulator loop. There's no real point doing it anyway since the clear will be done very shortly afterwards by the simulate loop and either there are no events (for a new avatar) or events don't matter (for a departing avatar). This matches existing behaviour in OdePrim
2012-03-20refactor: precalculate the fixed movement factor for avatar tilting ↵Justin Clark-Casey (justincc)1-8/+13
(sqrt(2)) rather than doing it multiple times on every move.
2012-02-11Clamp ODE character velocity. Make ODE falling character 54m/s by default.Justin Clark-Casey (justincc)1-1/+42
If velocity reaches 256 in any vector then bad things happen with ODE, so we now clamp this value. In addition, a falling avatar is clamped by default at 54 m/s, which is the same as a falling skydiver. This also appears to be the value used on the linden lab grid. This should resolve http://opensimulator.org/mantis/view.php?id=5882
2012-01-25Serialize calls to ODE Collide() function across OdeScene instances to ↵Justin Clark-Casey (justincc)1-0/+3
prevent ODE crashes on simulators running more than one region. It turns out that calls to Collide() are not thread-safe even for objects in different ODE physics worlds due to ODE static caches. For simulators running multiple regions, not serializing calls from different scene loops will sooner or later cause OpenSim to crash with a native stack trace referencing OBBCollider. This affects the default OPCODE collider but not GIMPACT. However, GIMPACT fails for other reasons under some current simulator loads. ODE provides a thread local storage option, but as of ODE r1755 (and r1840) DLLs compiled with this crash OpenSim immediately.
2012-01-24Restrict accessible of ODECharacter Shell and Body. Add method doc and some ↵Justin Clark-Casey (justincc)1-11/+26
error log lines.
2011-12-20Remove unused SetAcceleration and add set on Acceleration parameterDan Lake1-6/+1
2011-12-20Remove unused SetAcceleration and add set on Acceleration parameterDan Lake1-6/+1
2011-12-15Stop pointlessly setting the m_colliderarr[] to false in the ODECharacter ↵Justin Clark-Casey (justincc)1-5/+0
constructor
2011-12-15Stop having to call SetHeight again in ScenePresence.AddToPhysicalScene() ↵Justin Clark-Casey (justincc)1-16/+22
when we've already passed size information to the avatar at PhysicsScene.AddAvatar() Eliminate some copypasta for height setting in OdeCharacter
2011-12-15Code cleanup related to ScenePresence.PhysicsActor and OdeScene/OdeCharacterJustin Clark-Casey (justincc)1-3/+3
Stop hiding RemoveAvatar failure, add log messages when characters are removed through defects or re-added unexpectedly. Add commented out log lines for future use. Use automatic property for PhysicsActor for better code readability and simplicity
2011-11-25remove some mono compiler warningsJustin Clark-Casey (justincc)1-3/+3
2011-11-22slightly simplify OdeScene.Simulate() by removing bool processtaints, since ↵Justin Clark-Casey (justincc)1-117/+117
we can inspect count of taint lists instead. also groups OdeCharacter.CreateOdeStructures() and DestroyOdeStructures() together
2011-11-21Restore defects list. In hindsight, the reason for this is becuase we can't ↵Justin Clark-Casey (justincc)1-12/+15
remove the character whilst iterating over the list. This commit also removes locking on OdeScene._characters since code is single threaded
2011-11-21rename ODECharacter.AvatarGeomAndBodyCreation() -> CreateOdeStructures() to ↵Justin Clark-Casey (justincc)1-8/+10
match existing DestroyOdeStructures()
2011-11-21refactor: Eliminate one line ODECharacter.doForce() method for code clarityJustin Clark-Casey (justincc)1-15/+3
2011-11-21Comment out calls to OdeScene.waitForSpaceUnlock() since that method does ↵Justin Clark-Casey (justincc)1-2/+2
nothing right now
2011-11-21Reduce complexity of OdeScene.Simulate() by fully removing bad characters at ↵Justin Clark-Casey (justincc)1-29/+28
point of detection rather than later on.
2011-11-21move geom/actor map maintenance into ↵Justin Clark-Casey (justincc)1-8/+9
DestroyODEStructures()/AvatarGeomAndBodyCreation(). This saves us having to do it separately when a character capsule size is changed
2011-11-21When changing avatar size in ODE, remove the old actor from the name and ↵Justin Clark-Casey (justincc)1-7/+11
actor maps
2011-11-21When an ODECharacter is removed (e.g. when an avatar leaves a scene), remove ↵Justin Clark-Casey (justincc)1-9/+2
the actor reference in OdeScene.actor_name_map rather than leaving it dangling. This also largely centralizes adds/removes in OdeScene.AddCharacter()/RemoveCharacter()
2011-11-21Have ODECharacter and ODEPrim both use PhysicsActor.Name instead of ↵Justin Clark-Casey (justincc)1-8/+5
maintaining their own properties
2011-11-16Stop OdePrim and OdeCharacter insanely overriding set LocalID to set their ↵Justin Clark-Casey (justincc)1-6/+0
own private m_localID property but leaving get to return the then unset PhysicsActor.LocalId! Instead, just have both subclasses use the PhysicsActor.LocalID property. This restores collision functionality that fell away in 45c7789 yesterday
2011-11-04Add comment for experimental effect of removing the Thread.Sleep(20) in ↵Justin Clark-Casey (justincc)1-1/+1
ODEPrim.changevelocity()
2011-11-04Stop llPushObject() from causing problems by adding force via a taint rather ↵Justin Clark-Casey (justincc)1-2/+25
than directly. This isn't a perfect solution since there can be a race between the taint processing and taint setting, as force needs to be reset after processing. Needs careful locking in the future.
2011-10-29Add taint target velocity for ODECharacters as is already done for ↵Justin Clark-Casey (justincc)1-7/+12
ODECharacter position and position and velocity for ODEPrims. This is to help stop surprises if the velocity is set in the middle of physics calculations, though this probably isn't a huge problem. It's more for consistency and for the next step of removing some scene locks
2011-10-29tidy up OdeCharacter so that we just use OpenMetaverse.Vector3 assignment ↵Justin Clark-Casey (justincc)1-51/+39
directly where possible, instead of transferring X, Y and Z components separately some of this is probably a hold over from using ODE.Vector3, which is still necessary in some places.
2011-10-29Move position set from taint to logically better position at top of ↵Justin Clark-Casey (justincc)1-12/+12
ODECharacter.ProcessTaints() though this makes no practical difference
2011-10-29Stop setting _position as well as m_taint_position in ODECharacter.PositionJustin Clark-Casey (justincc)1-4/+1
setting position at the same time as taint appears to undermine the whole purpose of taint testing doesn't reveal any obvious regressions in doing this
2011-10-25Clear OdeCharacter CollisionEventUpdate when we subscribe or unsubscribe ↵Justin Clark-Casey (justincc)1-0/+2
from collision events
2011-10-25Remove unused fields from CollisionEventUpdateJustin Clark-Casey (justincc)1-1/+1
2011-10-25For ScenePresence collision events, instead of creating a new ↵Justin Clark-Casey (justincc)1-5/+3
CollisionEventsThisFrame every time we need to send some new ones, reuse the existing one instead. This assumes that the listener is using the data synchronously, which is currently the case.
2011-10-20For now, stop passing timeStep into methods where it's not actually used.Justin Clark-Casey (justincc)1-3/+2
2011-10-18Remove the unused CollisionLocker from ODEJustin Clark-Casey (justincc)1-1/+4
Despite its name, this wasn't actually being used in any collision checking
2011-10-15reduce access to ODECharacter methods to make code analysis easier. ↵Justin Clark-Casey (justincc)1-53/+35
Eliminate redundant argument on ProcessTaints()
2011-10-13More method doc and formatting changes. Makes DestroyOdeStructures() privateJustin Clark-Casey (justincc)1-6/+10
2011-10-13refactor: move 3x copy/pasted ode structure removal code in ODECharacter ↵Justin Clark-Casey (justincc)1-90/+57
into a DestroyOdeStructures() method also adds some method doc
2011-09-16Stop the avatar stalling on its first boarder cross when using the ODE pluginJustin Clark-Casey (justincc)1-6/+13
When upgrading the previously child agent to a root, the code was setting the Size parameter on the ODECharacter PhysicsActor. This in turn reset Velocity, which cause the border stall. I'm fixing this by commenting out the Velocity = Vector3.Zero lines since they don't appear to play a useful purpose
2011-08-11If SP.MoveToTarget has been called with a force walk, begin by landing the ↵Justin Clark-Casey (justincc)1-1/+5
avatar. There is a bug here - once an avatar has landed it glides to its new position instead of performing a walk animation
2011-08-10Add a OS_NPC_LAND_AT_TARGET option to osMoveToTarget()Justin Clark-Casey (justincc)1-0/+2
Default for this function is now not to automatically land. This allows better control by scripts when an avatar is going to be landing on a prim rather than the ground. Stopping the avatar involves faking a collision, to avoid the pid controller making it overshoot. A better approach would be to gradually slow the avatar as we near the target
2011-07-30minor: remove mono compiler warnings, some code spacing adjustmentsJustin Clark-Casey (justincc)1-1/+4
2011-07-30minor: Add method doc to collision subscription methods. Change method case ↵Justin Clark-Casey (justincc)1-2/+5
to reflect OpenSim standards.