aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/OpenSim/Region/Framework (unfollow)
Commit message (Collapse)AuthorFilesLines
2013-03-26Phase 1 of implementing a transfer permission. Overwrite libOMV's PermissionMaskMelanie6-3/+9
with our own and add export permissions as well as a new definition for "All" as meaning "all conventional permissions" rather than "all possible permissions"
2013-03-23Fix teleporting into the non-SW 256x256 corner of a megaregion, though ↵Justin Clark-Casey (justincc)1-0/+7
currently with a 10 second delay before auto-reteleport to the correct location. This now does a check for border crossing (required to trigger the teleport) immediately in SP.MakeRootAgent(). If left any later, it looks like the physics scene changes the position and stops the cross happening. If done any earlier, nothing happens because the cross-code currently requires a PhysicsActor to be in place, thuogh it's probably not necessary for this case.
2013-03-23Add "show borders" command to show the borders of a region.Justin Clark-Casey (justincc)3-6/+16
This is relevant to mega-regions where the borders are very different to a regular region. Also adds some method doc and other code comments.
2013-03-21On a teleport, lock m_agentsInTransit whilst we grab the value to check for ↵Justin Clark-Casey (justincc)1-4/+4
completion just to be sure we're not using a thread cached version.
2013-03-20minor: disable logging on regression TestCrossOnSameSimulator() that I ↵Justin Clark-Casey (justincc)1-1/+1
accidentally left on a few commits ago.
2013-03-20minor: don't bother with the pause before rezzing attachments if we are ↵Justin Clark-Casey (justincc)1-1/+15
running regression tests (fire and forget calls launched on the same thread). Also adds code comments as to why this pause exists.
2013-03-20On the later forms of teleport failure, tell the user if this was because ↵Justin Clark-Casey (justincc)2-23/+121
viewer couldn't/didn't connect with destination or if destination didn't signal teleport completion. Also adds regression test for the case where the viewer couldn't connect with the destination region. Also refactoring of regression test support code associated with entity transfer in order to make this test possible and the code less obscure.
2013-03-20Insert a short delay on the simulator side rezzing of attachments in order ↵Justin Clark-Casey (justincc)1-1/+1
to fix viewer 3 issues if its own rezzing actions on login collide with the simulator side actions. This resolves issues (at least in my tests with LL 3.3.4) where this can make attachments invisible until one zooms in on the avatar. This doesn't affect version 1 viewers since this delay is shorter than the login delay. This doesn't increase the login time since this part of the process was already being performed asynchronously. This may be a temporary solution.
2013-03-20Force a viewer object update for attachments at the end of the final ↵Justin Clark-Casey (justincc)1-0/+9
Scene.CompleteMovement() in order to make all multi-attachments appear on the destination region. For some reason, sending updates before this will not have this effect. This may be something related to some viewers (e.g. LL 3.3.4) or something OpenSimulator isn't getting quite right.
2013-03-18Multiattach, part 1Melanie2-2/+2
Conflicts: OpenSim/Framework/AvatarAppearance.cs OpenSim/Region/CoreModules/Avatar/Attachments/AttachmentsModule.cs OpenSim/Region/CoreModules/Avatar/Attachments/Tests/AttachmentsModuleTests.cs OpenSim/Region/Framework/Interfaces/IAttachmentsModule.cs OpenSim/Region/Framework/Scenes/Scene.cs OpenSim/Region/OptionalModules/Avatar/Attachments/TempAttachmentsModule.cs OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs
2013-03-14Make llGetObjectDetails() return the correct world rotation for a sitting avatarJustin Clark-Casey (justincc)1-5/+35
This addresses http://opensimulator.org/mantis/view.php?id=6567 This creates a ScenePresence.GetWorldRotation() with the same semantics as SOP.GetWorldRotation() SP.Rotation can't be used since it's relative to the sat upon prim if the avatar is sitting.
2013-03-13Remove unnecessary instation of DOMap() in SOP from commit 5c53660 since ↵Justin Clark-Casey (justincc)1-1/+0
this is being done lazily
2013-03-13Add prototype dynamic objects map for scene object partsJustin Clark-Casey (justincc)1-0/+22
This allows region modules to add dynamic objects to SOPs rather than having to continually push and pull OSD dynamic attributes. This is to explore the original MOAP use case for dynamic attributes where it could be very awkward and possibly time-consuming to keep reconstructing MediaEntrys from stored DynamicAttributes. This commit adds a DOExampleModule to demonstrate/evolve this code. Dynamic objects involve no storage or persistence changes - the 'backing store' for any data that does need to be saved will remain the DAMap. DOExampleModule in this commit only attaches a fresh dynamic object. Actually constructing this from stored dynamic attributes and handling persistence is left for later. These changes should affect no existing functionality, though it may or may not reveal necessary changes in DAMap down the road.
2013-03-11minor: remove mono compiler warning in SceneObjectUndoRedoTestsJustin Clark-Casey (justincc)1-2/+2
2013-03-08* Apparently, sometimes texture entries come in from the wire with no ↵teravus1-0/+17
default texture defined.. so apply better fallback protection against that. The net result is clients will have their selected textures set when they would have previously had an ignored exception.
2013-03-06Add code for testing event queue messages recevied on region cross.Justin Clark-Casey (justincc)1-5/+22
This is currently disabled pending an improvement in the test code to properly add avatars when an event queue module is present.
2013-03-06Add regression test for presence crossing between regions on the same simulator.Justin Clark-Casey (justincc)3-121/+159
Unlike a much earlier commented out version of this test, this is done in synchronous mode.
2013-03-05Per discussions with justincc... split the JsonStore typeMic Bowman1-1/+13
functions into one for node type and one for value type. Define and export constants for both nodes and values.
2013-03-02Move AllowedClients and BannedClients section to new [AccessControl] section ↵Justin Clark-Casey (justincc)1-2/+10
in OpenSim.ini from [Startup] This change also corrects the setting names - they were actually wrong (though the text in {} was correct). If there are settings in [Startup] they will continue to be used and anything there will override settings in [AccessControl]
2013-02-28Add regression tests for llGetNotecardLine()Justin Clark-Casey (justincc)1-2/+2
2013-02-27Get "show modules" console command to obey selected command line region/sJustin Clark-Casey (justincc)1-16/+11
2013-02-26Add regression test for llRequestUrl()Justin Clark-Casey (justincc)1-0/+11
2013-02-25Move map related settings from [Startup] to a new [Map] section in OpenSim.iniJustin Clark-Casey (justincc)1-2/+9
Existing map settings in [Startup] will continue to work, and if present will override anything in [Map] However, the proper place for such settings would now be [Map] This is to reduce the use of [Startup] as a bag for non-generic settings which should really go in sections, in common with other settings. This commit also extends Diva's previous work to allow a default setting to be given when looking at multiple sections for settings.
2013-02-22minor: Add doc to ScenePresence.IsInTransit to make it clear that this is ↵Justin Clark-Casey (justincc)1-0/+6
set only for region crossing and not teleport, etc.
2013-02-19Fix the JsonStore path set problem justincc found earlier today andMic Bowman1-1/+0
remove the deprecated TestPath functions.
2013-02-19Deleted all AssemblyFileVersion directivesDiva Canto1-1/+1
2013-02-16* Fix walking to <NaN, NaN, NaN> via autopilot.teravus1-1/+5
2013-02-16Add regression test TestSaveNonRootFolderToIarJustin Clark-Casey (justincc)3-5/+5
2013-02-14Rename new JsonScript functions JsonPathType() -> JsonGetPathType() and ↵Justin Clark-Casey (justincc)1-2/+2
JsonArrayLength() -> JsonGetArrayLength() This is for consistentency with the verb:noun naming approach existing json script functions and other script functions. Corresponding c# methods also changed since verb:noun is also the .net c# method naming guideline (as used by OpenSimulator) and for consistency with script functions. As agreed with cmickeyb
2013-02-14Add EventManager events triggered when a SOP is added or removedRobert Adams2-0/+57
from the physical scene. Invocations added in SceneObjectPart.
2013-02-14Add an event and some logic to allow customizing Simulator Features by avatarMelanie1-1/+5
2013-02-13Adds a couple requested functions to the JsonStore scriptMic Bowman1-0/+15
interface. JsonPathType returns the type of node pointed to by the path and deprecates the functionality of both JsonTestPath functions. JsonArrayLength returns the length of an array node.
2013-02-10Fix code to check for no spawn points. Possibly a merge artefact?Melanie1-2/+4
2013-02-10Fix teleport/telehub issue:BlueWall2-3/+17
Fix bug that allowed only login access to regions with mis-configured telehubs. Administrators now have teleport access when there exists a mis-configured telehub in the region. Estate owners are now placed at region center in the absence of spawnpoints instead of being denied access. Grid Gods are unrestricted. All others are denied access to the region until spawnpoints are assigned to the telehub object.
2013-02-08If a component of a coalesced object fails to deserialization, do not add a ↵Justin Clark-Casey (justincc)1-4/+18
null where the object should be. This prevents a later load IAR failure. This code is currently only used by IAR loading.
2013-02-07Actually plumb the new values to physics.Melanie1-0/+20
2013-02-07Add some more code from Avination. This changes physics actor stuff aroundMelanie1-37/+152
to work with the new params. Not actually plumbed just yet.
2013-02-07Plumb the path from the client to the extra physics params and backMelanie3-2/+26
2013-02-07Revert "Add plumbing for physics properties to get to the physics engine."Melanie1-50/+6
This reverts commit c658fa1c0dd83f23c66ccfedb12e8ab02ff01d0a.
2013-02-07Add plumbing for physics properties to get to the physics engine.Robert Adams1-6/+50
Addition of entries to PhysicsActor and setting code in SceneObjectPart.
2013-02-07Rename "Bounciness" to "Restitution"Melanie2-6/+6
2013-02-06Enables script access to the per object dynamic attributes through the JsonStoreMic Bowman1-0/+1
script functions. Adds JsonAttachObjectStore to associate a store identifier with an object (scripts can only access the store in their host object, this could be extended but isn't necessary for now). Note this opens a method to the DAMap OSDMap. This will be removed later, but greatly simplifies the code for now. The JsonStore and these scripts are disabled by default.
2013-02-06Partial port of Avination's support for the new physics parameters.Melanie2-3/+136
Implements the parameters as properties, the serialization and database storage (MySQL only). Implements llSetPrimitiveParams for prim physics shape and the other 4 extra params. Only the prim shape type "None" is currently functional. No support for the Viewer UI (yet), that will be ported in due course. Lots more to port, this is a large-ish changeset.
2013-02-06Remove long unused Scene.DumpAssetsToFile boolean.Justin Clark-Casey (justincc)1-5/+0
2013-02-06Remove very long unused IScriptHost and NullScriptHostJustin Clark-Casey (justincc)3-138/+1
2013-02-06Remove unused ScriptEngineLoader and ScriptEngineInterface in ↵Justin Clark-Casey (justincc)3-168/+0
OpenSim.Region.Framework.dll I believe this predates the generic system of registering interfaces and is very long unused.
2013-02-06Remove wrong code in ScriptUtils.GetAssetIdFromKeyOrItemName which would ↵Justin Clark-Casey (justincc)1-15/+0
return the item ID instead of the asset ID if the identifier was a uuid that matched an inventory item name. This would practically never happen. This makes this overloaded version of the function consistent with the other version. It looks like this accidentally came over in commit c5af16a from Tue Oct 16 12:40:21 2012 However, there's arguably a case for looking for an item name that matches a UUID before assuming that the identifier is already an asset ID.
2013-02-06refactor: Move functions that lookup asset ids from task inventory or pass ↵Justin Clark-Casey (justincc)1-0/+122
them through to ScriptUtils class in OpenSim.Region.Framework.dll Renames functions to better reflect what they do. This is so that code registering with modInvoke() can reuse this code to provide functions that behave in a consistent manner with existing LSL/OSSL functions.
2013-02-05Bump version and assembly version numbers from 0.7.5 to 0.7.6Justin Clark-Casey (justincc)1-1/+1
This is mostly Bluewall's work but I am also bumping the general version number OpenSimulator 0.7.5 remains in the release candidate stage. I'm doing this because master is significantly adding things that will not be in 0.7.5 This update should not cause issues with existing external binary DLLs because our DLLs do not have strong names and so the exact version match requirement is not in force.
2013-02-01Revert "Update assembly version numbers"BlueWall1-1/+1
This reverts commit 141ad829f448b9138b12be7cf99c834c1f3977ec.
generated by cgit v1.1 at 2024-12-22 01:48:24 +0000