aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/OpenSim/Framework/Util.cs (unfollow)
Commit message (Collapse)AuthorFilesLines
2013-01-02Allow registering regions whose names are equivalent under LIKE but not ↵Oren Hurvitz1-0/+11
truly equal
2013-01-01minor: Assign names to the different SmartThreadPools for debugging purposes.Justin Clark-Casey (justincc)1-0/+1
A different approach to the patch in http://opensimulator.org/mantis/view.php?id=6462 that doesn't involve further forking of SmartThreadPool
2013-01-01refactor: call Util.InitThreadPool() if we are initializing an uninitialized ↵Justin Clark-Casey (justincc)1-1/+1
pool on first use rather than constructing it ourselves. No functional change.
2012-12-22Add helper routine Util.InRange()Robert Adams1-0/+7
2012-12-16Add stack dump function that takes an alternate printer outter. I've found ↵Robert Adams1-1/+7
that log4net can be slowish so, if one is generating A LOT of debug output, alternate printers are better
2012-11-23Make "show threads" and "thread abort" console commands available on all serversJustin Clark-Casey (justincc)1-6/+10
2012-10-29fixing poorly-formatted xml doc string for Util.IsInsideBoxSignpostMarv1-1/+1
2012-10-05Add "show object pos <start-coord> to <end-coord>" command to simulator console.Justin Clark-Casey (justincc)1-0/+13
This allows you to display details of all objects in a given bounding box. Values parts of the co-ord can be left out as appropriate (e.g. to get all objects between the ground and z=30. See "help show object pos" for more details.
2012-09-11Add levels 4 and 5 to "debug http" console command that will log a sample of ↵Justin Clark-Casey (justincc)1-0/+32
incoming request data and the entire incoming data respectively. See "help debug http" for more details.
2012-08-17adding a clip method to handle Vector3 objects to enable a minor amount of ↵SignpostMarv1-0/+6
refactoring
2012-07-13Rather than instantiating a UTF8 encoding everywhere when we want to supress ↵Justin Clark-Casey (justincc)1-0/+1
the BOM, use a single Util.UTF8NoBomEncoding. This class is thread-safe (as evidenced by the provision of the system-wide Encoding.UTF8 which does not suppress BOM on output).
2012-07-11Where possible, use the system Encoding.ASCII and Encoding.UTF8 rather than ↵Justin Clark-Casey (justincc)1-2/+1
constructing fresh copies. The encodings are thread-safe and already used in such a manner in other places. This isn't done where Byte Order Mark output is suppressed, since Encoding.UTF8 is constructed to output the BOM.
2012-03-21Refix the fixed fix!Melanie1-2037/+2037
2012-03-20Fixed borkness with previous merge.Diva Canto1-16/+1
2012-03-20Line endingsDiva Canto1-89/+89
2012-03-20HG Friends: allow the establishment of HG friendships without requiring ↵Diva Canto1-1954/+1988
co-presence in the same sim. Using avatar picker, users can now search for names such as "first.last@grid.com:9000", find them, and request friendship. Friendship requests are stored if target user is offline. TESTED ON STANDALONE ONLY.
2012-03-20Move frame loop entirely within Scene.Update() for better future performance ↵Justin Clark-Casey (justincc)1-2/+15
analysis and stat accuracy. Update() now accepts a frames parameter which can control the number of frames updated. -1 will update until shutdown. The watchdog updating moves above the maintc recalculation for any required sleep since it should be accounted for within the frame.
2012-03-16Improve threadpool reporting to "show threads" console command (also gets ↵Justin Clark-Casey (justincc)1-1/+55
printed out periodically)
2012-03-16Add process working memory to "show stats" memory statistics.Justin Clark-Casey (justincc)1-2/+5
This shows the actual amount of RAM being taken up by OpenSimulator (objects + vm overhead)
2012-02-21Add 64 bit Windows sqlite3.dll and use this if running a 64-bit windows process.Justin Clark-Casey (justincc)1-0/+30
2012-02-18On Windows automatically load the correct native ODE library depending on ↵Justin Clark-Casey (justincc)1-1/+37
whether the process is 32-bit or 64-bit In theory, this means that a 64-bit Windows OS user can now run OpenSim.exe with ODE and use more than 2 (or 3) GB of memory. However, this is completely untested since I don't currently own a 64-bit Windows box. Feedback appreciated. Using OpenSim.32BitLaunch.exe should continue to work. Other platforms are unaffected. This will currently not work with sqlite - I will add that too if this works.
2012-02-10Add line numbers to Util.PrintCallStack()Justin Clark-Casey (justincc)1-2/+3
2011-12-08Reactivate BasicCircuitTests.TestAddClient()Justin Clark-Casey (justincc)1-16/+29
This checks that the initial UseCircuitCode packet is handled correctly for a normal client login.
2011-10-22Get UUIDGatherer to scan notecards in the graph for asset uuids.Justin Clark-Casey (justincc)1-3/+4
This is to support npc baked texture saving in oars and iars. May address http://opensimulator.org/mantis/view.php?id=5743
2011-09-13In an object return message, send a null-terminated empty string in binary ↵Justin Clark-Casey (justincc)1-2/+40
bucket to prevent a viewer 3 crash. This is the message sent to the client when the object is returned. We were sending byte[0] in the binary bucket. This didn't kill viewer 1 but did terminate viewer 3 (don't know about viewer 2). So sending "\0" instead. This is to address http://opensimulator.org/mantis/view.php?id=5683
2011-08-31If a FireAndForget thread terminates with an exception, then catch and log ↵Justin Clark-Casey (justincc)1-1/+15
rather than letting it terminate the simulator. Exceptions don't appear to do this with the SmartThreadPool but they do with UnsafeQueueUserWorkItem (and maybe others)
2011-08-16Add new FireAndForgetMethod.None.Justin Clark-Casey (justincc)1-1/+10
This executes the callback on the same thread that made the request. Designed for use only by regression tests that rely on a predicable event ordering.
2011-07-29For all Util.FireAndForget invocations, set thread to en_US before ↵Justin Clark-Casey (justincc)1-5/+10
continuing wtih the invocation. This is to avoid bugs where the locale is not manually set on the thread and bad data values get sent to the database or over the wire. Lots of code does this manually but as we've seen, a subtle change can hit code which has forgotton to do this. Since en_US show be used throughout the server at present, setting it at FireAndForget seems reasonable. Arguably, it would be better to do this where data is sent, but doing it here is much easier. All the manual BeginInvokes() remaining in the code should probably call FireAndForget instead.
2011-07-08When loading library asset set, only store an asset if it's different from ↵Justin Clark-Casey (justincc)1-3/+13
an existing one with the same id. We compare existing and loaded asset by doing an SHA1 on both, so that a changed library asset will still update the store. This cuts asset library load time from 10 seconds to <1 sec. Note, a fix on the previous commit revealed a bug where a library script cannot be copied except on the first login after a cache clear. This is unrelated to this commit and needs to be fixed at some subsequent time.
2011-07-08Fix interpretation of physics mesh proxies from mesh dataJustin Clark-Casey (justincc)1-2/+17
As per http://wiki.secondlife.com/wiki/Mesh/Mesh_Asset_Format, some submesh blocks may just have the flag "NoGeometry" to signal that they provide no mesh data. If a block contains this, ignore it for meshing purposes rather than suffer a ClassCastException This fixes physics proxy meshing, so you can now walk through mesh doorways, properly stand on the trailer of mesh trucks, etc. To get mesh physics proxy, the UseMeshiesPhysicsMesh must be true in a [Mesh] config section in OpenSim.ini (example in OpenSimDefaults.ini). Convex hull physics not currently supported.
2011-05-22More on HG Friends. Added Delete(string, string) across the board. Added ↵Diva Canto1-2/+4
security to friendship identifiers so that they can safely be deleted across worlds. Had to change Get(string) to use LIKE because the secret in the identifier is not always known -- affects only HG visitors. BOTTOM LINE SO FAR: HG friendships established and deleted safely across grids, local rights working but not (yet?) being transmitted back.
2011-05-19HG Friends working to some extent: friendships offered and accepted ↵Diva Canto1-0/+61
correctly handled. Friends list showing correct foreign names. TODO: GrantRights.
2011-04-19Requeue unacknowledged entity updates rather than resend then "as is".Dan Lake1-0/+17
Often, by the time the UDPServer realizes that an entity update packet has not been acknowledged, there is a newer update for the same entity already queued up or there is a higher priority update that should be sent first. This patch eliminates 1:1 packet resends for unacked entity update packets. Insteawd, unacked update packets are decomposed into the original entity updates and those updates are placed back into the priority queues based on their new priority but the original update timestamp. This will generally place them at the head of the line to be put back on the wire as a new outgoing packet but prevents the resend queue from filling up with multiple stale updates for the same entity. This new approach takes advantage of the UDP nature of the Linden protocol in that the intent of a reliable update packet is that if it goes unacknowledge, SOMETHING has to happen to get the update to the client. We are simply making sure that we are resending current object state rather than stale object state. Additionally, this patch includes a generalized callback mechanism so that any caller can specify their own method to call when a packet expires without being acknowledged. We use this mechanism to requeue update packets and otherwise use the UDPServer default method of just putting expired packets in the resend queue.
2011-04-18Requeue unacknowledged entity updates rather than resend then "as is".Dan Lake1-0/+17
Often, by the time the UDPServer realizes that an entity update packet has not been acknowledged, there is a newer update for the same entity already queued up or there is a higher priority update that should be sent first. This patch eliminates 1:1 packet resends for unacked entity update packets. Insteawd, unacked update packets are decomposed into the original entity updates and those updates are placed back into the priority queues based on their new priority but the original update timestamp. This will generally place them at the head of the line to be put back on the wire as a new outgoing packet but prevents the resend queue from filling up with multiple stale updates for the same entity. This new approach takes advantage of the UDP nature of the Linden protocol in that the intent of a reliable update packet is that if it goes unacknowledge, SOMETHING has to happen to get the update to the client. We are simply making sure that we are resending current object state rather than stale object state. Additionally, this patch includes a generalized callback mechanism so that any caller can specify their own method to call when a packet expires without being acknowledged. We use this mechanism to requeue update packets and otherwise use the UDPServer default method of just putting expired packets in the resend queue.
2011-02-22Parameterizes the view distance used to compute and manageMic Bowman1-3/+10
child agents in neighbor regions. This means you can extend the view on a simulator beyond the default 3x3 regions. This uses a region default draw distance and should be replaced at some point by the avatar specified draw distance. That will require more careful, dynamic recomputation of child agents every time the draw distance changes. WARNING: this is experimental and has known instabilities. specifically all regions "within site" should be running the same default draw distance or agents will not be closed correctly.
2011-02-04Put something in the ImprovedInstantMessage.BinaryBucket for ↵Justin Clark-Casey (justincc)1-0/+10
llInstantMessage() to stop this crashing viewer 2.4.0 (1.23.5 was fine with this). We're putting in a string of format "<region name><x pos floor int><y pos floor int><z pos floor int> which appears to be the expected value. This resolves http://opensimulator.org/mantis/view.php?id=5356
2011-01-13Make FireAndForgetWrapper a singleton classBlueWall1-3/+24
Made FireAndForgetWrapper a singleton class to allow us to drop dependancy on the BclExtras35 library. BclExtras is broken in Mono 2.8.2 and we used the library in only one function.
2011-01-13Make FireAndForgetWrapper a singleton classBlueWall1-3/+24
Made FireAndForgetWrapper a singleton class to allow us to drop dependancy on the BclExtras35 library. BclExtras is broken in Mono 2.8.2 and we used the library in only one function.
2010-11-29Preservation of creator information now also working in IARs. Cleaned up ↵Diva Canto1-0/+20
usage help. Moved Osp around, deleted unnecessary OspInventoryWrapperPlugin, added manipulation of SOP's xml representation in a generic ExternalRepresentationUtils function.
2010-11-27Changed the parser for InventoryItem deserialization. Moved some utility ↵Diva Canto1-0/+61
functions around.
2010-11-17minor: add some method commentsJustin Clark-Casey (justincc)1-0/+8
2010-10-03Port ExecutingDirectory from omfOS Util class.Melanie1-0/+11
2010-09-04Make User Agent Service and Login Service separable.Diva Canto1-1/+17
2010-09-03Added XFF header processing. Untested, for lack of proxy.Diva Canto1-0/+28
2010-08-07Correct display of landmark about info. Also correct region maturity ratingMelanie Thielker1-1/+11
in LM info. Maturity is NOT the parcel's setting, that is only for the image and text. Parcel maturity is governed by region maturity.
2010-04-16Fix http://opensimulator.org/mantis/view.php?id=4657 where ↵Justin Clark-Casey (justincc)1-1/+1
OpenSim.Grid.UserServer.exe fails on startup if no previous config probably appears to occur because mono 2.4.2.3 (and possibly later) erroneously returns a value of 0 for BufferWidth and BufferHeight in some circumstances
2010-03-06Bug fix: store correct position information upon logout. Fixes mantis #4608Diva Canto1-0/+18
2010-02-18Change handling of the SYSTEMIP constant to be more sane.Melanie1-6/+12
This will now choose the first network interface IP address, or the loopback interface if no external interfaces are found. It will log the IP address used as [NETWORK]: Using x.x.x.x for SYSTEMIP.
2010-01-30Changed an error message to w warning message.Diva Canto1-1/+1
2009-12-31More progress on both the Simulation service and the Login service. Both ↵Diva Canto1-0/+27
still unfinished.