1 files changed, 62 insertions, 62 deletions

diff --git a/bin/OpenSim.ini.example b/bin/OpenSim.ini.example
index 67bbb79..2c3ad63 100644
--- a/bin/OpenSim.ini.example
+++ b/bin/OpenSim.ini.example
@@ -46,8 +46,8 @@
 
 
 [Const]
-        ; this section defines constants for grid services
-        ; to simplify other configuration files default settings
+    ; this section defines constants for grid services
+    ; to simplify other configuration files default settings
 
     ;# {BaseHostname} {} {BaseHostname} {"example.com" "127.0.0.1"} "127.0.0.1"
     BaseHostname = "127.0.0.1"
@@ -58,7 +58,7 @@
     ;# {PublicPort} {} {PublicPort} {8002 9000} "8002"
     PublicPort = "8002"
 
-        ;grid default private port 8003, not used in standalone
+    ;grid default private port 8003, not used in standalone
     ;# {PrivatePort} {} {PrivatePort} {8003} "8003"
     ; port to access private grid services.
     ; grids that run all their regions should deny access to this port
@@ -90,7 +90,7 @@
     ;# {ConsoleHistoryTimeStamp} {} {Time stamp commands in history file} {} false
     ;; Time stamp commands in history file (default false)
     ; ConsoleHistoryTimeStamp = false
-        
+    
     ;# {save_crashes} {} {Save crashes to disk?} {true false} false
     ;; Set this to true if you want to log crashes to disk
     ;; this can be useful when submitting bug reports.
@@ -242,7 +242,7 @@
     ;; Default is Meshmerizer
     ; meshing = Meshmerizer
     ; meshing = ZeroMesher
-        ;; select ubODEMeshmerizer only with ubOde physics engine
+    ;; select ubODEMeshmerizer only with ubOde physics engine
     ; meshing = ubODEMeshmerizer
 
     ;; Choose one of the physics engines below
@@ -257,8 +257,8 @@
     ; physics = BulletSim
     ; physics = basicphysics
     ; physics = POS
-        ;; alternative OpenDynamicsEngine engine. ubODEMeshmerizer meshing above MUST be selected also
-        ; physics = ubODE
+    ;; alternative OpenDynamicsEngine engine. ubODEMeshmerizer meshing above MUST be selected also
+    ; physics = ubODE
 
     ; ubODE and  OpenDynamicsEngine does allocate a lot of memory on stack. On linux you may need to increase its limit
     ; script opensim-ode-sh starts opensim setting that limit. You may need to increase it even more on large regions
@@ -269,7 +269,7 @@
     ; DefaultScriptEngine = "XEngine"
     ;; ***DANGER***DANGER***
     ;; experimental engine
-    ;; see section [YEngine} below
+    ;; see section [YEngine] below
     ; DefaultScriptEngine = "YEngine"
     
     ;# {HttpProxy} {} {Proxy URL for llHTTPRequest and dynamic texture loading} {} http://proxy.com:8080
@@ -304,7 +304,7 @@
     ;; default is false
     ; TelehubAllowLandmark = false
 
-    
+
     ;; SSL certificate validation options
     ;; you can allow selfsigned certificates or no official CA with next option set to true
     ;# {NoVerifyCertChain} {} {do not verify SSL Cert Chain} {true false} true
@@ -335,7 +335,7 @@
     ;; - "Imprudence" has no access
     ;; - "Imprudence 1.3" has no access
     ;; - "Imprudence 1.3.1" has access
-        ;;
+    ;;
     ; DeniedClients = ""
 
 
@@ -522,39 +522,39 @@
     ;; the region ports use UDP.
     ; http_listener_port = 9000
 
-        ; optional main server secure http (ssl)
-        ; to use ssl you need a ssl certificate in PKCS12 format that validates the ExternalHostnames 
-        ; or their domains
-        ; some viewers by default only accept certificates signed by a oficial CA
-        ; to use others like self signed certificates with those viewers,
-        ; their debug option NoVerifySSLCert needs to be set true, You need to inform users about this
-        ; the main unsecure port will still open for some services. this may change in future.
-        
-        ; set http_listener_ssl to enable main server ssl. it will replace unsecure port on most functions
-        ;# {http_listener_ssl}{} {enable main server ssl port)} {} false
+    ; optional main server secure http (ssl)
+    ; to use ssl you need a ssl certificate in PKCS12 format that validates the ExternalHostnames 
+    ; or their domains
+    ; some viewers by default only accept certificates signed by a oficial CA
+    ; to use others like self signed certificates with those viewers,
+    ; their debug option NoVerifySSLCert needs to be set true, You need to inform users about this
+    ; the main unsecure port will still open for some services. this may change in future.
+    
+    ; set http_listener_ssl to enable main server ssl. it will replace unsecure port on most functions
+    ;# {http_listener_ssl}{} {enable main server ssl port)} {} false
     ;http_listener_ssl = false
-        
-        ; Set port for main SSL connections
-        ;# {http_listener_sslport}{} {main server ssl port)} {} 9001
+    
+    ; Set port for main SSL connections
+    ;# {http_listener_sslport}{} {main server ssl port)} {} 9001
     ;http_listener_sslport = 9001 ;
-        
-        ; currently if using ssl, regions ExternalHostName must the the same and equal to http_listener_cn
-        ; this may be removed in future
-        ;# {http_listener_cn}{} {main server ssl externalHostName)} {} ""
+    
+    ; currently if using ssl, regions ExternalHostName must the the same and equal to http_listener_cn
+    ; this may be removed in future
+    ;# {http_listener_cn}{} {main server ssl externalHostName)} {} ""
     ;http_listener_cn = "myRegionsExternalHostName"
 
-        ; the path for the certificate path
-        ;# {http_listener_cert_path}{} {main server ssl certificate file path)} {} ""
+    ; the path for the certificate path
+    ;# {http_listener_cert_path}{} {main server ssl certificate file path)} {} ""
     ;http_listener_cert_path = "mycert.p12"
-        
-        ;# {http_listener_cert_pass}{} {main server ssl certificate password)} {} ""
-        ;http_listener_cert_pass = "mycertpass" ; the cert passwork
-        
+    
+    ;# {http_listener_cert_pass}{} {main server ssl certificate password)} {} ""
+    ;http_listener_cert_pass = "mycertpass" ; the cert passwork
+    
     ; By default, OpenSimulator does not allow scripts to make HTTP calls to addresses on the simulator's LAN.
     ; See the OutboundDisallowForUserScripts parameter in OpenSimDefaults.ini for more information on this filter.
     ; If you need to allow scripts to make some LAN calls use the OutboundDisallowForUserScriptsExcept parameter below.
     ; We recommend that you do not override OutboundDisallowForUserScripts directly unless you are very sure about what you're doing.
-        ; this HTTP calls can also use ssl see opensimDefaults.ini
+    ; this HTTP calls can also use ssl see opensimDefaults.ini
     ;
     ; You can whitelist individual endpoints by IP or FQDN, e.g.
     ;
@@ -707,10 +707,10 @@
     ;DisableInterRegionTeleportCancellation = false
 
     ;# {LandingPointBehavior} {} {How to honor landing points and telehubs for gods.} {LandingPointBehavior_OS LandingPointBehavior_SL} LandingPointBehavior_OS
-        ;; This option exists to control the behavior of teleporting gods into places that have landing points
-        ;; and telehubs. Historically, there has been a difference: OpenSim (OS) has honored landing points and telehubs even for
-        ;; avatars with god permissions; SL lets gods land wherever they want.
-        ;LandingPointBehavior = LandingPointBehavior_OS
+    ;; This option exists to control the behavior of teleporting gods into places that have landing points
+    ;; and telehubs. Historically, there has been a difference: OpenSim (OS) has honored landing points and telehubs even for
+    ;; avatars with god permissions; SL lets gods land wherever they want.
+    ;LandingPointBehavior = LandingPointBehavior_OS
 
 [Messaging]
     ;# {OfflineMessageModule} {} {Module to use for offline message storage} {OfflineMessageModule "Offline Message Module V2" *}
@@ -729,9 +729,9 @@
     ;; For standalones, this is the storage dll.
     ; StorageProvider = OpenSim.Data.MySQL.dll
 
-        ; Mute list handler
+    ; Mute list handler
     ;# {MuteListModule} {MuteListModule:MuteListModule} {} {} None
-        ; Disabled by default
+    ; Disabled by default
     ; MuteListModule = MuteListModule
 
     ;; Control whether group invites and notices are stored for offline users.
@@ -949,8 +949,8 @@
     ;; Time a thread must be idle (in seconds) before it dies
     ; IdleTimeout = 60
 
-        ;; llSetTimerEvent minimum value. Default 0.5s, 0.05s whould be more resonable
-        ; MinTimerInterval = 0.5
+    ;; llSetTimerEvent minimum value. Default 0.5s, 0.05s whould be more resonable
+    ; MinTimerInterval = 0.5
 
     ;# {Priority} {Enabled:true} {Priority for script engine threads?} {Lowest BelowNormal Normal AboveNormal Highest} BelowNormal
     ;; Thread priority ("Lowest", "BelowNormal", "Normal", "AboveNormal",
@@ -977,7 +977,7 @@
     ;; at this time some mono versions seem to have problems with the true option
     ;; so default is now false until a fix is found, to simply life of less technical skilled users.
     ;; this should only be a issue if regions stay alive for a long time with lots of scripts added or edited.
-     AppDomainLoading = false
+    AppDomainLoading = false
 
     ;; Controls whether scripts are stopped by aborting their threads externally (abort) or by co-operative checks from the compiled script (co-op)
     ;; co-op will be more stable but this option is currently experimental.
@@ -1163,7 +1163,7 @@
     ; Applies Flotsam Group only. V2 has this always on, no other option
     ; MessageOnlineUsersOnly = false
 
-    ;; This makes the Group module very chatty on the console.
+    ;; This makes the Groups module very chatty on the console.
     ; DebugEnabled = false
 
     ; This makes the Group Messaging module very chatty on the console.
@@ -1177,17 +1177,17 @@
 
 [InterestManagement]
      ;; This section controls how state updates are prioritized for each client
-         
+     
      ;# {UpdatePrioritizationScheme} {} {Update prioritization scheme?} {BestAvatarResponsiveness SimpleAngularDistance} BestAvatarResponsiveness
      ;; Valid values are BestAvatarResponsiveness and SimpleAngularDistance
-         ;; SimpleAngularDistance does use more cpu
+     ;; SimpleAngularDistance does use more cpu
      ; UpdatePrioritizationScheme = BestAvatarResponsiveness
 
-        ;; ObjectsCullingByDistance, if true, don't send object updates if outside view range
-        ;; currently viewers are also told to delete objects that leave view range
-        ;; only avater position is considered, free camera may not see objects
-        ;; does increase cpu load
-        ; ObjectsCullingByDistance = false
+    ;; ObjectsCullingByDistance, if true, don't send object updates if outside view range
+    ;; currently viewers are also told to delete objects that leave view range
+    ;; only avater position is considered, free camera may not see objects
+    ;; does increase cpu load
+    ; ObjectsCullingByDistance = false
 
 [MediaOnAPrim]
     ;# {Enabled} {} {Enable Media-on-a-Prim (MOAP)} {true false} true
@@ -1199,22 +1199,22 @@
     ;# {Enabled} {} {Enable Non Player Character (NPC) facilities} {true false} false
     ; Enabled = false
 
-        ;; several options to control NPCs creation
+    ;; several options to control NPCs creation
 
     ;# {AllowNotOwned} {} {allow NPCs to be created not Owned} {true false} true
-        ;; allow NPCs to be created not Owned {true false} default: true
+    ;; allow NPCs to be created not Owned {true false} default: true
     ; AllowNotOwned = true
 
     ;# {AllowSenseAsAvatar} {} {allow NPCs to set to be sensed as Avatars} {true false} true
-        ;; allow NPCs to set to be sensed as Avatars {true false} default: true
+    ;; allow NPCs to set to be sensed as Avatars {true false} default: true
     ; AllowSenseAsAvatar = true
 
     ;# {AllowCloneOtherAvatars} {} {allow NPCs to created cloning any avatar in region} {true false} true
-        ;; allow NPCs to created cloning any avatar in region {true false} default: true
+    ;; allow NPCs to created cloning any avatar in region {true false} default: true
     ; AllowCloneOtherAvatars = true
 
     ;# {NoNPCGroup} {} {if true NPCs will have no group title, if false display "- NPC -"} {true false} true
-        ;; if true NPCs will have no group title, if false display "- NPC -" for easy identification {true false} default: true
+    ;; if true NPCs will have no group title, if false display "- NPC -" for easy identification {true false} default: true
     ; NoNPCGroup = true
 
 
@@ -1223,8 +1223,8 @@
     ; InitialTerrain = "pinhead-island"
 
 [LandManagement]
-        ;; set this to false to not display parcel ban lines
-        ;ShowParcelBansLines = true
+    ;; set this to false to not display parcel ban lines
+    ;ShowParcelBansLines = true
 
 [UserProfiles]
   ;# {ProfileServiceURL} {} {Set url to UserProfilesService} {}
@@ -1248,9 +1248,9 @@
 ;; Uncomment and customize appropriately if you want this behavior.
 ;;
 ;[GodNames]
-;       Enabled = false
-;       FullNames = "Test User, Foo Bar"
-;       Surnames = "Kryztlsk"
+;    Enabled = false
+;    FullNames = "Test User, Foo Bar"
+;    Surnames = "Kryztlsk"
 
 [Architecture]
     ;# {Include-Architecture} {} {Choose one of the following architectures} {config-include/Standalone.ini config-include/StandaloneHypergrid.ini config-include/Grid.ini config-include/GridHypergrid.ini config-include/SimianGrid.ini config-include/HyperSimianGrid.ini} config-include/Standalone.ini
@@ -1264,7 +1264,7 @@
     ;; "config-include/StandaloneCommon.ini.example" to "config-include/StandaloneCommon.ini" before
     ;; editing it to set the database and backend services that OpenSim will use.
     ;;
-     Include-Architecture = "config-include/Standalone.ini"
+    Include-Architecture = "config-include/Standalone.ini"
     ; Include-Architecture = "config-include/StandaloneHypergrid.ini"
     ; Include-Architecture = "config-include/Grid.ini"
     ; Include-Architecture = "config-include/GridHypergrid.ini"