43 files changed, 23071 insertions, 0 deletions

diff --git a/OpenSim/Region/PhysicsModules/BulletS/BSAPIUnman.cs b/OpenSim/Region/PhysicsModules/BulletS/BSAPIUnman.cs
new file mode 100755
index 0000000..c4a923c
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/BSAPIUnman.cs
@@ -0,0 +1,2120 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyrightD
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+using System;
+using System.Collections.Generic;
+using System.Reflection;
+using System.Runtime.InteropServices;
+using System.Security;
+using System.Text;
+
+using OpenSim.Framework;
+
+using OpenMetaverse;
+
+namespace OpenSim.Region.PhysicsModule.BulletS
+{
+public sealed class BSAPIUnman : BSAPITemplate
+{
+
+private sealed class BulletWorldUnman : BulletWorld
+{
+    public IntPtr ptr;
+    public BulletWorldUnman(uint id, BSScene physScene, IntPtr xx)
+        : base(id, physScene)
+    {
+        ptr = xx;
+    }
+}
+
+private sealed class BulletBodyUnman : BulletBody
+{
+    public IntPtr ptr;
+    public BulletBodyUnman(uint id, IntPtr xx)
+        : base(id)
+    {
+        ptr = xx;
+    }
+    public override bool HasPhysicalBody
+    {
+        get { return ptr != IntPtr.Zero; }
+    }
+    public override void Clear()
+    {
+        ptr = IntPtr.Zero;
+    }
+    public override string AddrString
+    {
+        get { return ptr.ToString("X"); }
+    }
+}
+
+private sealed class BulletShapeUnman : BulletShape
+{
+    public IntPtr ptr;
+    public BulletShapeUnman(IntPtr xx, BSPhysicsShapeType typ)
+        : base()
+    {
+        ptr = xx;
+        shapeType = typ;
+    }
+    public override bool HasPhysicalShape
+    {
+        get { return ptr != IntPtr.Zero; }
+    }
+    public override void Clear()
+    {
+        ptr = IntPtr.Zero;
+    }
+    public override BulletShape Clone()
+    {
+        return new BulletShapeUnman(ptr, shapeType);
+    }
+    public override bool ReferenceSame(BulletShape other)
+    {
+        BulletShapeUnman otheru = other as BulletShapeUnman;
+        return (otheru != null) && (this.ptr == otheru.ptr);
+
+    }
+    public override string AddrString
+    {
+        get { return ptr.ToString("X"); }
+    }
+}
+private sealed class BulletConstraintUnman : BulletConstraint
+{
+    public BulletConstraintUnman(IntPtr xx) : base()
+    {
+        ptr = xx;
+    }
+    public IntPtr ptr;
+
+    public override void Clear()
+    {
+        ptr = IntPtr.Zero;
+    }
+    public override bool HasPhysicalConstraint { get { return ptr != IntPtr.Zero; } }
+
+    // Used for log messages for a unique display of the memory/object allocated to this instance
+    public override string AddrString
+    {
+        get { return ptr.ToString("X"); }
+    }
+}
+
+// We pin the memory passed between the managed and unmanaged code.
+GCHandle m_paramsHandle;
+private GCHandle m_collisionArrayPinnedHandle;
+private GCHandle m_updateArrayPinnedHandle;
+
+// Handle to the callback used by the unmanaged code to call into the managed code.
+// Used for debug logging.
+// Need to store the handle in a persistant variable so it won't be freed.
+private BSAPICPP.DebugLogCallback m_DebugLogCallbackHandle;
+
+private BSScene PhysicsScene { get; set; }
+
+public override string BulletEngineName { get { return "BulletUnmanaged"; } }
+public override string BulletEngineVersion { get; protected set; }
+
+public BSAPIUnman(string paramName, BSScene physScene)
+{
+    PhysicsScene = physScene;
+
+    // Do something fancy with the paramName to get the right DLL implementation
+    //     like "Bullet-2.80-OpenCL-Intel" loading the version for Intel based OpenCL implementation, etc.
+    if (Util.IsWindows())
+        Util.LoadArchSpecificWindowsDll("BulletSim.dll");
+    // If not Windows, loading is performed by the
+    // Mono loader as specified in
+    // "bin/Physics/OpenSim.Region.Physics.BulletSPlugin.dll.config".
+}
+
+// Initialization and simulation
+public override BulletWorld Initialize(Vector3 maxPosition, ConfigurationParameters parms,
+                                                                                        int maxCollisions,  ref CollisionDesc[] collisionArray,
+                                                                                        int maxUpdates, ref EntityProperties[] updateArray
+                                            )
+{
+    // Pin down the memory that will be used to pass object collisions and updates back from unmanaged code
+    m_paramsHandle = GCHandle.Alloc(parms, GCHandleType.Pinned);
+    m_collisionArrayPinnedHandle = GCHandle.Alloc(collisionArray, GCHandleType.Pinned);
+    m_updateArrayPinnedHandle = GCHandle.Alloc(updateArray, GCHandleType.Pinned);
+
+    // If Debug logging level, enable logging from the unmanaged code
+    m_DebugLogCallbackHandle = null;
+    if (BSScene.m_log.IsDebugEnabled && PhysicsScene.PhysicsLogging.Enabled)
+    {
+        BSScene.m_log.DebugFormat("{0}: Initialize: Setting debug callback for unmanaged code", BSScene.LogHeader);
+        if (PhysicsScene.PhysicsLogging.Enabled)
+            // The handle is saved in a variable to make sure it doesn't get freed after this call
+            m_DebugLogCallbackHandle = new BSAPICPP.DebugLogCallback(BulletLoggerPhysLog);
+        else
+            m_DebugLogCallbackHandle = new BSAPICPP.DebugLogCallback(BulletLogger);
+    }
+
+    // Get the version of the DLL
+    // TODO: this doesn't work yet. Something wrong with marshaling the returned string.
+    // BulletEngineVersion = BulletSimAPI.GetVersion2();
+    BulletEngineVersion = "";
+
+    // Call the unmanaged code with the buffers and other information
+    return new BulletWorldUnman(0, PhysicsScene, BSAPICPP.Initialize2(maxPosition, m_paramsHandle.AddrOfPinnedObject(),
+                                    maxCollisions, m_collisionArrayPinnedHandle.AddrOfPinnedObject(),
+                                    maxUpdates, m_updateArrayPinnedHandle.AddrOfPinnedObject(),
+                                    m_DebugLogCallbackHandle));
+
+}
+
+// Called directly from unmanaged code so don't do much
+private void BulletLogger(string msg)
+{
+    BSScene.m_log.Debug("[BULLETS UNMANAGED]:" + msg);
+}
+
+// Called directly from unmanaged code so don't do much
+private void BulletLoggerPhysLog(string msg)
+{
+    PhysicsScene.DetailLog("[BULLETS UNMANAGED]:" + msg);
+}
+
+public override int PhysicsStep(BulletWorld world, float timeStep, int maxSubSteps, float fixedTimeStep,
+                                        out int updatedEntityCount, out int collidersCount)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    return BSAPICPP.PhysicsStep2(worldu.ptr, timeStep, maxSubSteps, fixedTimeStep, out updatedEntityCount, out collidersCount);
+}
+
+public override void Shutdown(BulletWorld world)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BSAPICPP.Shutdown2(worldu.ptr);
+
+    if (m_paramsHandle.IsAllocated)
+    {
+        m_paramsHandle.Free();
+    }
+    if (m_collisionArrayPinnedHandle.IsAllocated)
+    {
+        m_collisionArrayPinnedHandle.Free();
+    }
+    if (m_updateArrayPinnedHandle.IsAllocated)
+    {
+        m_updateArrayPinnedHandle.Free();
+    }
+}
+
+public override bool PushUpdate(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.PushUpdate2(bodyu.ptr);
+}
+
+public override bool UpdateParameter(BulletWorld world, uint localID, String parm, float value)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    return BSAPICPP.UpdateParameter2(worldu.ptr, localID, parm, value);
+}
+
+// =====================================================================================
+// Mesh, hull, shape and body creation helper routines
+public override BulletShape CreateMeshShape(BulletWorld world,
+                int indicesCount, int[] indices,
+                int verticesCount, float[] vertices)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    return new BulletShapeUnman(
+                    BSAPICPP.CreateMeshShape2(worldu.ptr, indicesCount, indices, verticesCount, vertices),
+                    BSPhysicsShapeType.SHAPE_MESH);
+}
+
+public override BulletShape CreateGImpactShape(BulletWorld world,
+                int indicesCount, int[] indices,
+                int verticesCount, float[] vertices)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    return new BulletShapeUnman(
+                    BSAPICPP.CreateGImpactShape2(worldu.ptr, indicesCount, indices, verticesCount, vertices),
+                    BSPhysicsShapeType.SHAPE_GIMPACT);
+}
+
+public override BulletShape CreateHullShape(BulletWorld world, int hullCount, float[] hulls)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    return new BulletShapeUnman(
+                    BSAPICPP.CreateHullShape2(worldu.ptr, hullCount, hulls),
+                    BSPhysicsShapeType.SHAPE_HULL);
+}
+
+public override BulletShape BuildHullShapeFromMesh(BulletWorld world, BulletShape meshShape, HACDParams parms)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletShapeUnman shapeu = meshShape as BulletShapeUnman;
+    return new BulletShapeUnman(
+                    BSAPICPP.BuildHullShapeFromMesh2(worldu.ptr, shapeu.ptr, parms),
+                    BSPhysicsShapeType.SHAPE_HULL);
+}
+
+public override BulletShape BuildConvexHullShapeFromMesh(BulletWorld world, BulletShape meshShape)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletShapeUnman shapeu = meshShape as BulletShapeUnman;
+    return new BulletShapeUnman(
+                    BSAPICPP.BuildConvexHullShapeFromMesh2(worldu.ptr, shapeu.ptr),
+                    BSPhysicsShapeType.SHAPE_CONVEXHULL);
+}
+
+public override BulletShape CreateConvexHullShape(BulletWorld world,
+                int indicesCount, int[] indices,
+                int verticesCount, float[] vertices)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    return new BulletShapeUnman(
+                    BSAPICPP.CreateConvexHullShape2(worldu.ptr, indicesCount, indices, verticesCount, vertices),
+                    BSPhysicsShapeType.SHAPE_CONVEXHULL);
+}
+
+public override BulletShape BuildNativeShape(BulletWorld world, ShapeData shapeData)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    return new BulletShapeUnman(BSAPICPP.BuildNativeShape2(worldu.ptr, shapeData), shapeData.Type);
+}
+
+public override bool IsNativeShape(BulletShape shape)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    if (shapeu != null && shapeu.HasPhysicalShape)
+        return BSAPICPP.IsNativeShape2(shapeu.ptr);
+    return false;
+}
+
+public override void SetShapeCollisionMargin(BulletShape shape, float margin)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    if (shapeu != null && shapeu.HasPhysicalShape)
+        BSAPICPP.SetShapeCollisionMargin(shapeu.ptr, margin);
+}
+
+public override BulletShape BuildCapsuleShape(BulletWorld world, float radius, float height, Vector3 scale)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    return new BulletShapeUnman(
+                   BSAPICPP.BuildCapsuleShape2(worldu.ptr, radius, height, scale),
+                   BSPhysicsShapeType.SHAPE_CAPSULE);
+}
+
+public override BulletShape CreateCompoundShape(BulletWorld world, bool enableDynamicAabbTree)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    return new BulletShapeUnman(
+                    BSAPICPP.CreateCompoundShape2(worldu.ptr, enableDynamicAabbTree),
+                    BSPhysicsShapeType.SHAPE_COMPOUND);
+
+}
+
+public override int GetNumberOfCompoundChildren(BulletShape shape)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    if (shapeu != null && shapeu.HasPhysicalShape)
+        return BSAPICPP.GetNumberOfCompoundChildren2(shapeu.ptr);
+    return 0;
+}
+
+public override void AddChildShapeToCompoundShape(BulletShape shape, BulletShape addShape, Vector3 pos, Quaternion rot)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    BulletShapeUnman addShapeu = addShape as BulletShapeUnman;
+    BSAPICPP.AddChildShapeToCompoundShape2(shapeu.ptr, addShapeu.ptr, pos, rot);
+}
+
+public override BulletShape GetChildShapeFromCompoundShapeIndex(BulletShape shape, int indx)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    return new BulletShapeUnman(BSAPICPP.GetChildShapeFromCompoundShapeIndex2(shapeu.ptr, indx), BSPhysicsShapeType.SHAPE_UNKNOWN);
+}
+
+public override BulletShape RemoveChildShapeFromCompoundShapeIndex(BulletShape shape, int indx)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    return new BulletShapeUnman(BSAPICPP.RemoveChildShapeFromCompoundShapeIndex2(shapeu.ptr, indx), BSPhysicsShapeType.SHAPE_UNKNOWN);
+}
+
+public override void RemoveChildShapeFromCompoundShape(BulletShape shape, BulletShape removeShape)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    BulletShapeUnman removeShapeu = removeShape as BulletShapeUnman;
+    BSAPICPP.RemoveChildShapeFromCompoundShape2(shapeu.ptr, removeShapeu.ptr);
+}
+
+public override void UpdateChildTransform(BulletShape pShape, int childIndex, Vector3 pos, Quaternion rot, bool shouldRecalculateLocalAabb)
+{
+    BulletShapeUnman shapeu = pShape as BulletShapeUnman;
+    BSAPICPP.UpdateChildTransform2(shapeu.ptr, childIndex, pos, rot, shouldRecalculateLocalAabb);
+}
+
+public override void RecalculateCompoundShapeLocalAabb(BulletShape shape)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    BSAPICPP.RecalculateCompoundShapeLocalAabb2(shapeu.ptr);
+}
+
+public override BulletShape DuplicateCollisionShape(BulletWorld world, BulletShape srcShape, uint id)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletShapeUnman srcShapeu = srcShape as BulletShapeUnman;
+    return new BulletShapeUnman(BSAPICPP.DuplicateCollisionShape2(worldu.ptr, srcShapeu.ptr, id), srcShape.shapeType);
+}
+
+public override bool DeleteCollisionShape(BulletWorld world, BulletShape shape)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    return BSAPICPP.DeleteCollisionShape2(worldu.ptr, shapeu.ptr);
+}
+
+public override CollisionObjectTypes GetBodyType(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return (CollisionObjectTypes)BSAPICPP.GetBodyType2(bodyu.ptr);
+}
+
+public override BulletBody CreateBodyFromShape(BulletWorld world, BulletShape shape, uint id, Vector3 pos, Quaternion rot)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    return new BulletBodyUnman(id, BSAPICPP.CreateBodyFromShape2(worldu.ptr, shapeu.ptr, id, pos, rot));
+}
+
+public override BulletBody CreateBodyWithDefaultMotionState(BulletShape shape, uint id, Vector3 pos, Quaternion rot)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    return new BulletBodyUnman(id, BSAPICPP.CreateBodyWithDefaultMotionState2(shapeu.ptr, id, pos, rot));
+}
+
+public override BulletBody CreateGhostFromShape(BulletWorld world, BulletShape shape, uint id, Vector3 pos, Quaternion rot)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    return new BulletBodyUnman(id, BSAPICPP.CreateGhostFromShape2(worldu.ptr, shapeu.ptr, id, pos, rot));
+}
+
+public override void DestroyObject(BulletWorld world, BulletBody obj)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.DestroyObject2(worldu.ptr, bodyu.ptr);
+}
+
+// =====================================================================================
+// Terrain creation and helper routines
+public override BulletShape CreateGroundPlaneShape(uint id, float height, float collisionMargin)
+{
+    return new BulletShapeUnman(BSAPICPP.CreateGroundPlaneShape2(id, height, collisionMargin), BSPhysicsShapeType.SHAPE_GROUNDPLANE);
+}
+
+public override BulletShape CreateTerrainShape(uint id, Vector3 size, float minHeight, float maxHeight, float[] heightMap,
+                                float scaleFactor, float collisionMargin)
+{
+    return new BulletShapeUnman(BSAPICPP.CreateTerrainShape2(id, size, minHeight, maxHeight, heightMap, scaleFactor, collisionMargin),
+                                                BSPhysicsShapeType.SHAPE_TERRAIN);
+}
+
+// =====================================================================================
+// Constraint creation and helper routines
+public override BulletConstraint Create6DofConstraint(BulletWorld world, BulletBody obj1, BulletBody obj2,
+                    Vector3 frame1loc, Quaternion frame1rot,
+                    Vector3 frame2loc, Quaternion frame2rot,
+                    bool useLinearReferenceFrameA, bool disableCollisionsBetweenLinkedBodies)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletBodyUnman bodyu1 = obj1 as BulletBodyUnman;
+    BulletBodyUnman bodyu2 = obj2 as BulletBodyUnman;
+    return new BulletConstraintUnman(BSAPICPP.Create6DofConstraint2(worldu.ptr, bodyu1.ptr, bodyu2.ptr, frame1loc, frame1rot,
+                    frame2loc, frame2rot, useLinearReferenceFrameA, disableCollisionsBetweenLinkedBodies));
+}
+
+public override BulletConstraint Create6DofConstraintToPoint(BulletWorld world, BulletBody obj1, BulletBody obj2,
+                    Vector3 joinPoint,
+                    bool useLinearReferenceFrameA, bool disableCollisionsBetweenLinkedBodies)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletBodyUnman bodyu1 = obj1 as BulletBodyUnman;
+    BulletBodyUnman bodyu2 = obj2 as BulletBodyUnman;
+    return new BulletConstraintUnman(BSAPICPP.Create6DofConstraintToPoint2(worldu.ptr, bodyu1.ptr, bodyu2.ptr,
+                    joinPoint, useLinearReferenceFrameA, disableCollisionsBetweenLinkedBodies));
+}
+
+public override BulletConstraint Create6DofConstraintFixed(BulletWorld world, BulletBody obj1,
+                    Vector3 frameInBloc, Quaternion frameInBrot,
+                    bool useLinearReferenceFrameB, bool disableCollisionsBetweenLinkedBodies)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletBodyUnman bodyu1 = obj1 as BulletBodyUnman;
+    return new BulletConstraintUnman(BSAPICPP.Create6DofConstraintFixed2(worldu.ptr, bodyu1.ptr,
+                    frameInBloc, frameInBrot, useLinearReferenceFrameB, disableCollisionsBetweenLinkedBodies));
+}
+
+public override BulletConstraint Create6DofSpringConstraint(BulletWorld world, BulletBody obj1, BulletBody obj2,
+                    Vector3 frame1loc, Quaternion frame1rot,
+                    Vector3 frame2loc, Quaternion frame2rot,
+                    bool useLinearReferenceFrameA, bool disableCollisionsBetweenLinkedBodies)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletBodyUnman bodyu1 = obj1 as BulletBodyUnman;
+    BulletBodyUnman bodyu2 = obj2 as BulletBodyUnman;
+    return new BulletConstraintUnman(BSAPICPP.Create6DofSpringConstraint2(worldu.ptr, bodyu1.ptr, bodyu2.ptr, frame1loc, frame1rot,
+                    frame2loc, frame2rot, useLinearReferenceFrameA, disableCollisionsBetweenLinkedBodies));
+}
+
+public override BulletConstraint CreateHingeConstraint(BulletWorld world, BulletBody obj1, BulletBody obj2,
+                    Vector3 pivotinA, Vector3 pivotinB,
+                    Vector3 axisInA, Vector3 axisInB,
+                    bool useLinearReferenceFrameA, bool disableCollisionsBetweenLinkedBodies)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletBodyUnman bodyu1 = obj1 as BulletBodyUnman;
+    BulletBodyUnman bodyu2 = obj2 as BulletBodyUnman;
+    return new BulletConstraintUnman(BSAPICPP.CreateHingeConstraint2(worldu.ptr, bodyu1.ptr, bodyu2.ptr,
+                    pivotinA, pivotinB, axisInA, axisInB, useLinearReferenceFrameA, disableCollisionsBetweenLinkedBodies));
+}
+
+public override BulletConstraint CreateSliderConstraint(BulletWorld world, BulletBody obj1, BulletBody obj2,
+                    Vector3 frame1loc, Quaternion frame1rot,
+                    Vector3 frame2loc, Quaternion frame2rot,
+                    bool useLinearReferenceFrameA, bool disableCollisionsBetweenLinkedBodies)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletBodyUnman bodyu1 = obj1 as BulletBodyUnman;
+    BulletBodyUnman bodyu2 = obj2 as BulletBodyUnman;
+    return new BulletConstraintUnman(BSAPICPP.CreateSliderConstraint2(worldu.ptr, bodyu1.ptr, bodyu2.ptr, frame1loc, frame1rot,
+                    frame2loc, frame2rot, useLinearReferenceFrameA, disableCollisionsBetweenLinkedBodies));
+}
+
+public override BulletConstraint CreateConeTwistConstraint(BulletWorld world, BulletBody obj1, BulletBody obj2,
+                    Vector3 frame1loc, Quaternion frame1rot,
+                    Vector3 frame2loc, Quaternion frame2rot,
+                    bool disableCollisionsBetweenLinkedBodies)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletBodyUnman bodyu1 = obj1 as BulletBodyUnman;
+    BulletBodyUnman bodyu2 = obj2 as BulletBodyUnman;
+    return new BulletConstraintUnman(BSAPICPP.CreateConeTwistConstraint2(worldu.ptr, bodyu1.ptr, bodyu2.ptr, frame1loc, frame1rot,
+                                        frame2loc, frame2rot, disableCollisionsBetweenLinkedBodies));
+}
+
+public override BulletConstraint CreateGearConstraint(BulletWorld world, BulletBody obj1, BulletBody obj2,
+                    Vector3 axisInA, Vector3 axisInB,
+                    float ratio, bool disableCollisionsBetweenLinkedBodies)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletBodyUnman bodyu1 = obj1 as BulletBodyUnman;
+    BulletBodyUnman bodyu2 = obj2 as BulletBodyUnman;
+    return new BulletConstraintUnman(BSAPICPP.CreateGearConstraint2(worldu.ptr, bodyu1.ptr, bodyu2.ptr, axisInA, axisInB,
+                                        ratio, disableCollisionsBetweenLinkedBodies));
+}
+
+public override BulletConstraint CreatePoint2PointConstraint(BulletWorld world, BulletBody obj1, BulletBody obj2,
+                    Vector3 pivotInA, Vector3 pivotInB,
+                    bool disableCollisionsBetweenLinkedBodies)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletBodyUnman bodyu1 = obj1 as BulletBodyUnman;
+    BulletBodyUnman bodyu2 = obj2 as BulletBodyUnman;
+    return new BulletConstraintUnman(BSAPICPP.CreatePoint2PointConstraint2(worldu.ptr, bodyu1.ptr, bodyu2.ptr, pivotInA, pivotInB,
+                                        disableCollisionsBetweenLinkedBodies));
+}
+
+public override void SetConstraintEnable(BulletConstraint constrain, float numericTrueFalse)
+{
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    BSAPICPP.SetConstraintEnable2(constrainu.ptr, numericTrueFalse);
+}
+
+public override void SetConstraintNumSolverIterations(BulletConstraint constrain, float iterations)
+{
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    BSAPICPP.SetConstraintNumSolverIterations2(constrainu.ptr, iterations);
+}
+
+public override bool SetFrames(BulletConstraint constrain,
+                Vector3 frameA, Quaternion frameArot, Vector3 frameB, Quaternion frameBrot)
+{
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    return BSAPICPP.SetFrames2(constrainu.ptr, frameA, frameArot, frameB, frameBrot);
+}
+
+public override bool SetLinearLimits(BulletConstraint constrain, Vector3 low, Vector3 hi)
+{
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    return BSAPICPP.SetLinearLimits2(constrainu.ptr, low, hi);
+}
+
+public override bool SetAngularLimits(BulletConstraint constrain, Vector3 low, Vector3 hi)
+{
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    return BSAPICPP.SetAngularLimits2(constrainu.ptr, low, hi);
+}
+
+public override bool UseFrameOffset(BulletConstraint constrain, float enable)
+{
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    return BSAPICPP.UseFrameOffset2(constrainu.ptr, enable);
+}
+
+public override bool TranslationalLimitMotor(BulletConstraint constrain, float enable, float targetVel, float maxMotorForce)
+{
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    return BSAPICPP.TranslationalLimitMotor2(constrainu.ptr, enable, targetVel, maxMotorForce);
+}
+
+public override bool SetBreakingImpulseThreshold(BulletConstraint constrain, float threshold)
+{
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    return BSAPICPP.SetBreakingImpulseThreshold2(constrainu.ptr, threshold);
+}
+
+public override bool HingeSetLimits(BulletConstraint constrain, float low, float high, float softness, float bias, float relaxation)
+{
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    return BSAPICPP.HingeSetLimits2(constrainu.ptr, low, high, softness, bias, relaxation);
+}
+
+public override bool SpringEnable(BulletConstraint constrain, int index, float numericTrueFalse)
+{
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    return BSAPICPP.ConstraintSpringEnable2(constrainu.ptr, index, numericTrueFalse);
+}
+
+public override bool SpringSetEquilibriumPoint(BulletConstraint constrain, int index, float equilibriumPoint)
+{
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    return BSAPICPP.ConstraintSpringSetEquilibriumPoint2(constrainu.ptr, index, equilibriumPoint);
+}
+
+public override bool SpringSetStiffness(BulletConstraint constrain, int index, float stiffnesss)
+{
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    return BSAPICPP.ConstraintSpringSetStiffness2(constrainu.ptr, index, stiffnesss);
+}
+
+public override bool SpringSetDamping(BulletConstraint constrain, int index, float damping)
+{
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    return BSAPICPP.ConstraintSpringSetDamping2(constrainu.ptr, index, damping);
+}
+
+public override bool SliderSetLimits(BulletConstraint constrain, int lowerUpper, int linAng, float val)
+{
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    return BSAPICPP.SliderSetLimits2(constrainu.ptr, lowerUpper, linAng, val);
+}
+
+public override bool SliderSet(BulletConstraint constrain, int softRestDamp, int dirLimOrtho, int linAng, float val)
+{
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    return BSAPICPP.SliderSet2(constrainu.ptr, softRestDamp, dirLimOrtho, linAng, val);
+}
+
+public override bool SliderMotorEnable(BulletConstraint constrain, int linAng, float numericTrueFalse)
+{
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    return BSAPICPP.SliderMotorEnable2(constrainu.ptr, linAng, numericTrueFalse);
+}
+
+public override bool SliderMotor(BulletConstraint constrain, int forceVel, int linAng, float val)
+{
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    return BSAPICPP.SliderMotor2(constrainu.ptr, forceVel, linAng, val);
+}
+
+public override bool CalculateTransforms(BulletConstraint constrain)
+{
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    return BSAPICPP.CalculateTransforms2(constrainu.ptr);
+}
+
+public override bool SetConstraintParam(BulletConstraint constrain, ConstraintParams paramIndex, float value, ConstraintParamAxis axis)
+{
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    return BSAPICPP.SetConstraintParam2(constrainu.ptr, paramIndex, value, axis);
+}
+
+public override bool DestroyConstraint(BulletWorld world, BulletConstraint constrain)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    return BSAPICPP.DestroyConstraint2(worldu.ptr, constrainu.ptr);
+}
+
+// =====================================================================================
+// btCollisionWorld entries
+public override void UpdateSingleAabb(BulletWorld world, BulletBody obj)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.UpdateSingleAabb2(worldu.ptr, bodyu.ptr);
+}
+
+public override void UpdateAabbs(BulletWorld world)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BSAPICPP.UpdateAabbs2(worldu.ptr);
+}
+
+public override bool GetForceUpdateAllAabbs(BulletWorld world)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    return BSAPICPP.GetForceUpdateAllAabbs2(worldu.ptr);
+}
+
+public override void SetForceUpdateAllAabbs(BulletWorld world, bool force)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BSAPICPP.SetForceUpdateAllAabbs2(worldu.ptr, force);
+}
+
+// =====================================================================================
+// btDynamicsWorld entries
+public override bool AddObjectToWorld(BulletWorld world, BulletBody obj)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+
+    // Bullet resets several variables when an object is added to the world.
+    //   Gravity is reset to world default depending on the static/dynamic
+    //   type. Of course, the collision flags in the broadphase proxy are initialized to default.
+    Vector3 origGrav = BSAPICPP.GetGravity2(bodyu.ptr);
+
+    bool ret = BSAPICPP.AddObjectToWorld2(worldu.ptr, bodyu.ptr);
+
+    if (ret)
+    {
+        BSAPICPP.SetGravity2(bodyu.ptr, origGrav);
+        obj.ApplyCollisionMask(world.physicsScene);
+    }
+    return ret;
+}
+
+public override bool RemoveObjectFromWorld(BulletWorld world, BulletBody obj)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.RemoveObjectFromWorld2(worldu.ptr, bodyu.ptr);
+}
+
+public override bool ClearCollisionProxyCache(BulletWorld world, BulletBody obj)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.ClearCollisionProxyCache2(worldu.ptr, bodyu.ptr);
+}
+
+public override bool AddConstraintToWorld(BulletWorld world, BulletConstraint constrain, bool disableCollisionsBetweenLinkedObjects)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    return BSAPICPP.AddConstraintToWorld2(worldu.ptr, constrainu.ptr, disableCollisionsBetweenLinkedObjects);
+}
+
+public override bool RemoveConstraintFromWorld(BulletWorld world, BulletConstraint constrain)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    return BSAPICPP.RemoveConstraintFromWorld2(worldu.ptr, constrainu.ptr);
+}
+// =====================================================================================
+// btCollisionObject entries
+public override Vector3 GetAnisotripicFriction(BulletConstraint constrain)
+{
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    return BSAPICPP.GetAnisotripicFriction2(constrainu.ptr);
+}
+
+public override Vector3 SetAnisotripicFriction(BulletConstraint constrain, Vector3 frict)
+{
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    return BSAPICPP.SetAnisotripicFriction2(constrainu.ptr, frict);
+}
+
+public override bool HasAnisotripicFriction(BulletConstraint constrain)
+{
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    return BSAPICPP.HasAnisotripicFriction2(constrainu.ptr);
+}
+
+public override void SetContactProcessingThreshold(BulletBody obj, float val)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetContactProcessingThreshold2(bodyu.ptr, val);
+}
+
+public override float GetContactProcessingThreshold(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetContactProcessingThreshold2(bodyu.ptr);
+}
+
+public override bool IsStaticObject(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.IsStaticObject2(bodyu.ptr);
+}
+
+public override bool IsKinematicObject(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.IsKinematicObject2(bodyu.ptr);
+}
+
+public override bool IsStaticOrKinematicObject(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.IsStaticOrKinematicObject2(bodyu.ptr);
+}
+
+public override bool HasContactResponse(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.HasContactResponse2(bodyu.ptr);
+}
+
+public override void SetCollisionShape(BulletWorld world, BulletBody obj, BulletShape shape)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    if (worldu != null && bodyu != null)
+    {
+        // Special case to allow the caller to zero out the reference to any physical shape
+        if (shapeu != null)
+            BSAPICPP.SetCollisionShape2(worldu.ptr, bodyu.ptr, shapeu.ptr);
+        else
+            BSAPICPP.SetCollisionShape2(worldu.ptr, bodyu.ptr, IntPtr.Zero);
+    }
+}
+
+public override BulletShape GetCollisionShape(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return new BulletShapeUnman(BSAPICPP.GetCollisionShape2(bodyu.ptr), BSPhysicsShapeType.SHAPE_UNKNOWN);
+}
+
+public override int GetActivationState(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetActivationState2(bodyu.ptr);
+}
+
+public override void SetActivationState(BulletBody obj, int state)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetActivationState2(bodyu.ptr, state);
+}
+
+public override void SetDeactivationTime(BulletBody obj, float dtime)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetDeactivationTime2(bodyu.ptr, dtime);
+}
+
+public override float GetDeactivationTime(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetDeactivationTime2(bodyu.ptr);
+}
+
+public override void ForceActivationState(BulletBody obj, ActivationState state)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.ForceActivationState2(bodyu.ptr, state);
+}
+
+public override void Activate(BulletBody obj, bool forceActivation)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.Activate2(bodyu.ptr, forceActivation);
+}
+
+public override bool IsActive(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.IsActive2(bodyu.ptr);
+}
+
+public override void SetRestitution(BulletBody obj, float val)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetRestitution2(bodyu.ptr, val);
+}
+
+public override float GetRestitution(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetRestitution2(bodyu.ptr);
+}
+
+public override void SetFriction(BulletBody obj, float val)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetFriction2(bodyu.ptr, val);
+}
+
+public override float GetFriction(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetFriction2(bodyu.ptr);
+}
+
+public override Vector3 GetPosition(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetPosition2(bodyu.ptr);
+}
+
+public override Quaternion GetOrientation(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetOrientation2(bodyu.ptr);
+}
+
+public override void SetTranslation(BulletBody obj, Vector3 position, Quaternion rotation)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetTranslation2(bodyu.ptr, position, rotation);
+}
+
+    /*
+public override IntPtr GetBroadphaseHandle(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetBroadphaseHandle2(bodyu.ptr);
+}
+
+public override void SetBroadphaseHandle(BulletBody obj, IntPtr handle)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetUserPointer2(bodyu.ptr, handle);
+}
+     */
+
+public override void SetInterpolationLinearVelocity(BulletBody obj, Vector3 vel)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetInterpolationLinearVelocity2(bodyu.ptr, vel);
+}
+
+public override void SetInterpolationAngularVelocity(BulletBody obj, Vector3 vel)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetInterpolationAngularVelocity2(bodyu.ptr, vel);
+}
+
+public override void SetInterpolationVelocity(BulletBody obj, Vector3 linearVel, Vector3 angularVel)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetInterpolationVelocity2(bodyu.ptr, linearVel, angularVel);
+}
+
+public override float GetHitFraction(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetHitFraction2(bodyu.ptr);
+}
+
+public override void SetHitFraction(BulletBody obj, float val)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetHitFraction2(bodyu.ptr, val);
+}
+
+public override CollisionFlags GetCollisionFlags(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetCollisionFlags2(bodyu.ptr);
+}
+
+public override CollisionFlags SetCollisionFlags(BulletBody obj, CollisionFlags flags)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.SetCollisionFlags2(bodyu.ptr, flags);
+}
+
+public override CollisionFlags AddToCollisionFlags(BulletBody obj, CollisionFlags flags)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.AddToCollisionFlags2(bodyu.ptr, flags);
+}
+
+public override CollisionFlags RemoveFromCollisionFlags(BulletBody obj, CollisionFlags flags)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.RemoveFromCollisionFlags2(bodyu.ptr, flags);
+}
+
+public override float GetCcdMotionThreshold(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetCcdMotionThreshold2(bodyu.ptr);
+}
+
+
+public override void SetCcdMotionThreshold(BulletBody obj, float val)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetCcdMotionThreshold2(bodyu.ptr, val);
+}
+
+public override float GetCcdSweptSphereRadius(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetCcdSweptSphereRadius2(bodyu.ptr);
+}
+
+public override void SetCcdSweptSphereRadius(BulletBody obj, float val)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetCcdSweptSphereRadius2(bodyu.ptr, val);
+}
+
+public override IntPtr GetUserPointer(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetUserPointer2(bodyu.ptr);
+}
+
+public override void SetUserPointer(BulletBody obj, IntPtr val)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetUserPointer2(bodyu.ptr, val);
+}
+
+// =====================================================================================
+// btRigidBody entries
+public override void ApplyGravity(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.ApplyGravity2(bodyu.ptr);
+}
+
+public override void SetGravity(BulletBody obj, Vector3 val)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetGravity2(bodyu.ptr, val);
+}
+
+public override Vector3 GetGravity(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetGravity2(bodyu.ptr);
+}
+
+public override void SetDamping(BulletBody obj, float lin_damping, float ang_damping)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetDamping2(bodyu.ptr, lin_damping, ang_damping);
+}
+
+public override void SetLinearDamping(BulletBody obj, float lin_damping)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetLinearDamping2(bodyu.ptr, lin_damping);
+}
+
+public override void SetAngularDamping(BulletBody obj, float ang_damping)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetAngularDamping2(bodyu.ptr, ang_damping);
+}
+
+public override float GetLinearDamping(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetLinearDamping2(bodyu.ptr);
+}
+
+public override float GetAngularDamping(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetAngularDamping2(bodyu.ptr);
+}
+
+public override float GetLinearSleepingThreshold(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetLinearSleepingThreshold2(bodyu.ptr);
+}
+
+public override void ApplyDamping(BulletBody obj, float timeStep)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.ApplyDamping2(bodyu.ptr, timeStep);
+}
+
+public override void SetMassProps(BulletBody obj, float mass, Vector3 inertia)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetMassProps2(bodyu.ptr, mass, inertia);
+}
+
+public override Vector3 GetLinearFactor(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetLinearFactor2(bodyu.ptr);
+}
+
+public override void SetLinearFactor(BulletBody obj, Vector3 factor)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetLinearFactor2(bodyu.ptr, factor);
+}
+
+public override void SetCenterOfMassByPosRot(BulletBody obj, Vector3 pos, Quaternion rot)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetCenterOfMassByPosRot2(bodyu.ptr, pos, rot);
+}
+
+// Add a force to the object as if its mass is one.
+// Deep down in Bullet: m_totalForce += force*m_linearFactor;
+public override void ApplyCentralForce(BulletBody obj, Vector3 force)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.ApplyCentralForce2(bodyu.ptr, force);
+}
+
+// Set the force being applied to the object as if its mass is one.
+public override void SetObjectForce(BulletBody obj, Vector3 force)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetObjectForce2(bodyu.ptr, force);
+}
+
+public override Vector3 GetTotalForce(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetTotalForce2(bodyu.ptr);
+}
+
+public override Vector3 GetTotalTorque(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetTotalTorque2(bodyu.ptr);
+}
+
+public override Vector3 GetInvInertiaDiagLocal(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetInvInertiaDiagLocal2(bodyu.ptr);
+}
+
+public override void SetInvInertiaDiagLocal(BulletBody obj, Vector3 inert)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetInvInertiaDiagLocal2(bodyu.ptr, inert);
+}
+
+public override void SetSleepingThresholds(BulletBody obj, float lin_threshold, float ang_threshold)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetSleepingThresholds2(bodyu.ptr, lin_threshold, ang_threshold);
+}
+
+// Deep down in Bullet: m_totalTorque += torque*m_angularFactor;
+public override void ApplyTorque(BulletBody obj, Vector3 torque)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.ApplyTorque2(bodyu.ptr, torque);
+}
+
+// Apply force at the given point. Will add torque to the object.
+// Deep down in Bullet: applyCentralForce(force);
+//                              applyTorque(rel_pos.cross(force*m_linearFactor));
+public override void ApplyForce(BulletBody obj, Vector3 force, Vector3 pos)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.ApplyForce2(bodyu.ptr, force, pos);
+}
+
+// Apply impulse to the object. Same as "ApplycentralForce" but force scaled by object's mass.
+// Deep down in Bullet: m_linearVelocity += impulse *m_linearFactor * m_inverseMass;
+public override void ApplyCentralImpulse(BulletBody obj, Vector3 imp)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.ApplyCentralImpulse2(bodyu.ptr, imp);
+}
+
+// Apply impulse to the object's torque. Force is scaled by object's mass.
+// Deep down in Bullet: m_angularVelocity += m_invInertiaTensorWorld * torque * m_angularFactor;
+public override void ApplyTorqueImpulse(BulletBody obj, Vector3 imp)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.ApplyTorqueImpulse2(bodyu.ptr, imp);
+}
+
+// Apply impulse at the point given. For is scaled by object's mass and effects both linear and angular forces.
+// Deep down in Bullet: applyCentralImpulse(impulse);
+//                              applyTorqueImpulse(rel_pos.cross(impulse*m_linearFactor));
+public override void ApplyImpulse(BulletBody obj, Vector3 imp, Vector3 pos)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.ApplyImpulse2(bodyu.ptr, imp, pos);
+}
+
+public override void ClearForces(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.ClearForces2(bodyu.ptr);
+}
+
+public override void ClearAllForces(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.ClearAllForces2(bodyu.ptr);
+}
+
+public override void UpdateInertiaTensor(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.UpdateInertiaTensor2(bodyu.ptr);
+}
+
+public override Vector3 GetLinearVelocity(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetLinearVelocity2(bodyu.ptr);
+}
+
+public override Vector3 GetAngularVelocity(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetAngularVelocity2(bodyu.ptr);
+}
+
+public override void SetLinearVelocity(BulletBody obj, Vector3 vel)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetLinearVelocity2(bodyu.ptr, vel);
+}
+
+public override void SetAngularVelocity(BulletBody obj, Vector3 angularVelocity)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetAngularVelocity2(bodyu.ptr, angularVelocity);
+}
+
+public override Vector3 GetVelocityInLocalPoint(BulletBody obj, Vector3 pos)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetVelocityInLocalPoint2(bodyu.ptr, pos);
+}
+
+public override void Translate(BulletBody obj, Vector3 trans)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.Translate2(bodyu.ptr, trans);
+}
+
+public override void UpdateDeactivation(BulletBody obj, float timeStep)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.UpdateDeactivation2(bodyu.ptr, timeStep);
+}
+
+public override bool WantsSleeping(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.WantsSleeping2(bodyu.ptr);
+}
+
+public override void SetAngularFactor(BulletBody obj, float factor)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetAngularFactor2(bodyu.ptr, factor);
+}
+
+public override void SetAngularFactorV(BulletBody obj, Vector3 factor)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BSAPICPP.SetAngularFactorV2(bodyu.ptr, factor);
+}
+
+public override Vector3 GetAngularFactor(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetAngularFactor2(bodyu.ptr);
+}
+
+public override bool IsInWorld(BulletWorld world, BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.IsInWorld2(bodyu.ptr);
+}
+
+public override void AddConstraintRef(BulletBody obj, BulletConstraint constrain)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    BSAPICPP.AddConstraintRef2(bodyu.ptr, constrainu.ptr);
+}
+
+public override void RemoveConstraintRef(BulletBody obj, BulletConstraint constrain)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    BSAPICPP.RemoveConstraintRef2(bodyu.ptr, constrainu.ptr);
+}
+
+public override BulletConstraint GetConstraintRef(BulletBody obj, int index)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return new BulletConstraintUnman(BSAPICPP.GetConstraintRef2(bodyu.ptr, index));
+}
+
+public override int GetNumConstraintRefs(BulletBody obj)
+{
+    BulletBodyUnman bodyu = obj as BulletBodyUnman;
+    return BSAPICPP.GetNumConstraintRefs2(bodyu.ptr);
+}
+
+public override bool SetCollisionGroupMask(BulletBody body, uint filter, uint mask)
+{
+    BulletBodyUnman bodyu = body as BulletBodyUnman;
+    return BSAPICPP.SetCollisionGroupMask2(bodyu.ptr, filter, mask);
+}
+
+// =====================================================================================
+// btCollisionShape entries
+
+public override float GetAngularMotionDisc(BulletShape shape)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    return BSAPICPP.GetAngularMotionDisc2(shapeu.ptr);
+}
+
+public override float GetContactBreakingThreshold(BulletShape shape, float defaultFactor)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    return BSAPICPP.GetContactBreakingThreshold2(shapeu.ptr, defaultFactor);
+}
+
+public override bool IsPolyhedral(BulletShape shape)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    return BSAPICPP.IsPolyhedral2(shapeu.ptr);
+}
+
+public override bool IsConvex2d(BulletShape shape)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    return BSAPICPP.IsConvex2d2(shapeu.ptr);
+}
+
+public override bool IsConvex(BulletShape shape)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    return BSAPICPP.IsConvex2(shapeu.ptr);
+}
+
+public override bool IsNonMoving(BulletShape shape)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    return BSAPICPP.IsNonMoving2(shapeu.ptr);
+}
+
+public override bool IsConcave(BulletShape shape)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    return BSAPICPP.IsConcave2(shapeu.ptr);
+}
+
+public override bool IsCompound(BulletShape shape)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    return BSAPICPP.IsCompound2(shapeu.ptr);
+}
+
+public override bool IsSoftBody(BulletShape shape)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    return BSAPICPP.IsSoftBody2(shapeu.ptr);
+}
+
+public override bool IsInfinite(BulletShape shape)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    return BSAPICPP.IsInfinite2(shapeu.ptr);
+}
+
+public override void SetLocalScaling(BulletShape shape, Vector3 scale)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    BSAPICPP.SetLocalScaling2(shapeu.ptr, scale);
+}
+
+public override Vector3 GetLocalScaling(BulletShape shape)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    return BSAPICPP.GetLocalScaling2(shapeu.ptr);
+}
+
+public override Vector3 CalculateLocalInertia(BulletShape shape, float mass)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    return BSAPICPP.CalculateLocalInertia2(shapeu.ptr, mass);
+}
+
+public override int GetShapeType(BulletShape shape)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    return BSAPICPP.GetShapeType2(shapeu.ptr);
+}
+
+public override void SetMargin(BulletShape shape, float val)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    BSAPICPP.SetMargin2(shapeu.ptr, val);
+}
+
+public override float GetMargin(BulletShape shape)
+{
+    BulletShapeUnman shapeu = shape as BulletShapeUnman;
+    return BSAPICPP.GetMargin2(shapeu.ptr);
+}
+
+// =====================================================================================
+// Debugging
+public override void DumpRigidBody(BulletWorld world, BulletBody collisionObject)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletBodyUnman bodyu = collisionObject as BulletBodyUnman;
+    BSAPICPP.DumpRigidBody2(worldu.ptr, bodyu.ptr);
+}
+
+public override void DumpCollisionShape(BulletWorld world, BulletShape collisionShape)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletShapeUnman shapeu = collisionShape as BulletShapeUnman;
+    BSAPICPP.DumpCollisionShape2(worldu.ptr, shapeu.ptr);
+}
+
+public override void DumpConstraint(BulletWorld world, BulletConstraint constrain)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BulletConstraintUnman constrainu = constrain as BulletConstraintUnman;
+    BSAPICPP.DumpConstraint2(worldu.ptr, constrainu.ptr);
+}
+
+public override void DumpActivationInfo(BulletWorld world)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BSAPICPP.DumpActivationInfo2(worldu.ptr);
+}
+
+public override void DumpAllInfo(BulletWorld world)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BSAPICPP.DumpAllInfo2(worldu.ptr);
+}
+
+public override void DumpPhysicsStatistics(BulletWorld world)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BSAPICPP.DumpPhysicsStatistics2(worldu.ptr);
+}
+public override void ResetBroadphasePool(BulletWorld world)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BSAPICPP.ResetBroadphasePool(worldu.ptr);
+}
+public override void ResetConstraintSolver(BulletWorld world)
+{
+    BulletWorldUnman worldu = world as BulletWorldUnman;
+    BSAPICPP.ResetConstraintSolver(worldu.ptr);
+}
+
+// =====================================================================================
+// =====================================================================================
+// =====================================================================================
+// =====================================================================================
+// =====================================================================================
+// The actual interface to the unmanaged code
+static class BSAPICPP
+{
+// ===============================================================================
+// Link back to the managed code for outputting log messages
+[UnmanagedFunctionPointer(CallingConvention.Cdecl)]
+public delegate void DebugLogCallback([MarshalAs(UnmanagedType.LPStr)]string msg);
+
+// ===============================================================================
+// Initialization and simulation
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr Initialize2(Vector3 maxPosition, IntPtr parms,
+                                                                                        int maxCollisions,  IntPtr collisionArray,
+                                                                                        int maxUpdates, IntPtr updateArray,
+                                            DebugLogCallback logRoutine);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern int PhysicsStep2(IntPtr world, float timeStep, int maxSubSteps, float fixedTimeStep,
+                        out int updatedEntityCount, out int collidersCount);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void Shutdown2(IntPtr sim);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool PushUpdate2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool UpdateParameter2(IntPtr world, uint localID, String parm, float value);
+
+// =====================================================================================
+// Mesh, hull, shape and body creation helper routines
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr CreateMeshShape2(IntPtr world,
+                int indicesCount, [MarshalAs(UnmanagedType.LPArray)] int[] indices,
+                int verticesCount, [MarshalAs(UnmanagedType.LPArray)] float[] vertices );
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr CreateGImpactShape2(IntPtr world,
+                int indicesCount, [MarshalAs(UnmanagedType.LPArray)] int[] indices,
+                int verticesCount, [MarshalAs(UnmanagedType.LPArray)] float[] vertices );
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr CreateHullShape2(IntPtr world,
+                int hullCount, [MarshalAs(UnmanagedType.LPArray)] float[] hulls);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr BuildHullShapeFromMesh2(IntPtr world, IntPtr meshShape, HACDParams parms);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr BuildConvexHullShapeFromMesh2(IntPtr world, IntPtr meshShape);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr CreateConvexHullShape2(IntPtr world,
+                int indicesCount, [MarshalAs(UnmanagedType.LPArray)] int[] indices,
+                int verticesCount, [MarshalAs(UnmanagedType.LPArray)] float[] vertices );
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr BuildNativeShape2(IntPtr world, ShapeData shapeData);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool IsNativeShape2(IntPtr shape);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetShapeCollisionMargin(IntPtr shape, float margin);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr BuildCapsuleShape2(IntPtr world, float radius, float height, Vector3 scale);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr CreateCompoundShape2(IntPtr sim, bool enableDynamicAabbTree);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern int GetNumberOfCompoundChildren2(IntPtr cShape);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void AddChildShapeToCompoundShape2(IntPtr cShape, IntPtr addShape, Vector3 pos, Quaternion rot);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr GetChildShapeFromCompoundShapeIndex2(IntPtr cShape, int indx);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr RemoveChildShapeFromCompoundShapeIndex2(IntPtr cShape, int indx);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void RemoveChildShapeFromCompoundShape2(IntPtr cShape, IntPtr removeShape);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void UpdateChildTransform2(IntPtr pShape, int childIndex, Vector3 pos, Quaternion rot, bool shouldRecalculateLocalAabb);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void RecalculateCompoundShapeLocalAabb2(IntPtr cShape);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr DuplicateCollisionShape2(IntPtr sim, IntPtr srcShape, uint id);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool DeleteCollisionShape2(IntPtr world, IntPtr shape);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern int GetBodyType2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr CreateBodyFromShape2(IntPtr sim, IntPtr shape, uint id, Vector3 pos, Quaternion rot);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr CreateBodyWithDefaultMotionState2(IntPtr shape, uint id, Vector3 pos, Quaternion rot);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr CreateGhostFromShape2(IntPtr sim, IntPtr shape, uint id, Vector3 pos, Quaternion rot);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void DestroyObject2(IntPtr sim, IntPtr obj);
+
+// =====================================================================================
+// Terrain creation and helper routines
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr CreateGroundPlaneShape2(uint id, float height, float collisionMargin);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr CreateTerrainShape2(uint id, Vector3 size, float minHeight, float maxHeight,
+                                            [MarshalAs(UnmanagedType.LPArray)] float[] heightMap,
+                                            float scaleFactor, float collisionMargin);
+
+// =====================================================================================
+// Constraint creation and helper routines
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr Create6DofConstraint2(IntPtr world, IntPtr obj1, IntPtr obj2,
+                    Vector3 frame1loc, Quaternion frame1rot,
+                    Vector3 frame2loc, Quaternion frame2rot,
+                    bool useLinearReferenceFrameA, bool disableCollisionsBetweenLinkedBodies);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr Create6DofConstraintToPoint2(IntPtr world, IntPtr obj1, IntPtr obj2,
+                    Vector3 joinPoint,
+                    bool useLinearReferenceFrameA, bool disableCollisionsBetweenLinkedBodies);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr Create6DofConstraintFixed2(IntPtr world, IntPtr obj1,
+                    Vector3 frameInBloc, Quaternion frameInBrot,
+                    bool useLinearReferenceFrameB, bool disableCollisionsBetweenLinkedBodies);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr Create6DofSpringConstraint2(IntPtr world, IntPtr obj1, IntPtr obj2,
+                    Vector3 frame1loc, Quaternion frame1rot,
+                    Vector3 frame2loc, Quaternion frame2rot,
+                    bool useLinearReferenceFrameA, bool disableCollisionsBetweenLinkedBodies);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr CreateHingeConstraint2(IntPtr world, IntPtr obj1, IntPtr obj2,
+                    Vector3 pivotinA, Vector3 pivotinB,
+                    Vector3 axisInA, Vector3 axisInB,
+                    bool useLinearReferenceFrameA, bool disableCollisionsBetweenLinkedBodies);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr CreateSliderConstraint2(IntPtr world, IntPtr obj1, IntPtr obj2,
+                    Vector3 frameInAloc, Quaternion frameInArot,
+                    Vector3 frameInBloc, Quaternion frameInBrot,
+                    bool useLinearReferenceFrameA, bool disableCollisionsBetweenLinkedBodies);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr CreateConeTwistConstraint2(IntPtr world, IntPtr obj1, IntPtr obj2,
+                    Vector3 frameInAloc, Quaternion frameInArot,
+                    Vector3 frameInBloc, Quaternion frameInBrot,
+                    bool disableCollisionsBetweenLinkedBodies);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr CreateGearConstraint2(IntPtr world, IntPtr obj1, IntPtr obj2,
+                    Vector3 axisInA, Vector3 axisInB,
+                    float ratio, bool disableCollisionsBetweenLinkedBodies);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr CreatePoint2PointConstraint2(IntPtr world, IntPtr obj1, IntPtr obj2,
+                    Vector3 pivotInA, Vector3 pivotInB,
+                    bool disableCollisionsBetweenLinkedBodies);
+
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetConstraintEnable2(IntPtr constrain, float numericTrueFalse);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetConstraintNumSolverIterations2(IntPtr constrain, float iterations);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool SetFrames2(IntPtr constrain,
+                Vector3 frameA, Quaternion frameArot, Vector3 frameB, Quaternion frameBrot);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool SetLinearLimits2(IntPtr constrain, Vector3 low, Vector3 hi);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool SetAngularLimits2(IntPtr constrain, Vector3 low, Vector3 hi);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool UseFrameOffset2(IntPtr constrain, float enable);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool TranslationalLimitMotor2(IntPtr constrain, float enable, float targetVel, float maxMotorForce);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool SetBreakingImpulseThreshold2(IntPtr constrain, float threshold);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool HingeSetLimits2(IntPtr constrain, float low, float high, float softness, float bias, float relaxation);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool ConstraintSpringEnable2(IntPtr constrain, int index, float numericTrueFalse);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool ConstraintSpringSetEquilibriumPoint2(IntPtr constrain, int index, float equilibriumPoint);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool ConstraintSpringSetStiffness2(IntPtr constrain, int index, float stiffness);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool ConstraintSpringSetDamping2(IntPtr constrain, int index, float damping);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool SliderSetLimits2(IntPtr constrain, int lowerUpper, int linAng, float val);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool SliderSet2(IntPtr constrain, int softRestDamp, int dirLimOrtho, int linAng, float val);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool SliderMotorEnable2(IntPtr constrain, int linAng, float numericTrueFalse);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool SliderMotor2(IntPtr constrain, int forceVel, int linAng, float val);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool CalculateTransforms2(IntPtr constrain);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool SetConstraintParam2(IntPtr constrain, ConstraintParams paramIndex, float value, ConstraintParamAxis axis);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool DestroyConstraint2(IntPtr world, IntPtr constrain);
+
+// =====================================================================================
+// btCollisionWorld entries
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void UpdateSingleAabb2(IntPtr world, IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void UpdateAabbs2(IntPtr world);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool GetForceUpdateAllAabbs2(IntPtr world);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetForceUpdateAllAabbs2(IntPtr world, bool force);
+
+// =====================================================================================
+// btDynamicsWorld entries
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool AddObjectToWorld2(IntPtr world, IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool RemoveObjectFromWorld2(IntPtr world, IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool ClearCollisionProxyCache2(IntPtr world, IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool AddConstraintToWorld2(IntPtr world, IntPtr constrain, bool disableCollisionsBetweenLinkedObjects);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool RemoveConstraintFromWorld2(IntPtr world, IntPtr constrain);
+// =====================================================================================
+// btCollisionObject entries
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern Vector3 GetAnisotripicFriction2(IntPtr constrain);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern Vector3 SetAnisotripicFriction2(IntPtr constrain, Vector3 frict);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool HasAnisotripicFriction2(IntPtr constrain);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetContactProcessingThreshold2(IntPtr obj, float val);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern float GetContactProcessingThreshold2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool IsStaticObject2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool IsKinematicObject2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool IsStaticOrKinematicObject2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool HasContactResponse2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetCollisionShape2(IntPtr sim, IntPtr obj, IntPtr shape);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr GetCollisionShape2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern int GetActivationState2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetActivationState2(IntPtr obj, int state);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetDeactivationTime2(IntPtr obj, float dtime);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern float GetDeactivationTime2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void ForceActivationState2(IntPtr obj, ActivationState state);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void Activate2(IntPtr obj, bool forceActivation);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool IsActive2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetRestitution2(IntPtr obj, float val);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern float GetRestitution2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetFriction2(IntPtr obj, float val);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern float GetFriction2(IntPtr obj);
+
+    /* Haven't defined the type 'Transform'
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern Transform GetWorldTransform2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void setWorldTransform2(IntPtr obj, Transform trans);
+     */
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern Vector3 GetPosition2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern Quaternion GetOrientation2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetTranslation2(IntPtr obj, Vector3 position, Quaternion rotation);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr GetBroadphaseHandle2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetBroadphaseHandle2(IntPtr obj, IntPtr handle);
+
+    /*
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern Transform GetInterpolationWorldTransform2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetInterpolationWorldTransform2(IntPtr obj, Transform trans);
+     */
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetInterpolationLinearVelocity2(IntPtr obj, Vector3 vel);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetInterpolationAngularVelocity2(IntPtr obj, Vector3 vel);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetInterpolationVelocity2(IntPtr obj, Vector3 linearVel, Vector3 angularVel);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern float GetHitFraction2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetHitFraction2(IntPtr obj, float val);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern CollisionFlags GetCollisionFlags2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern CollisionFlags SetCollisionFlags2(IntPtr obj, CollisionFlags flags);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern CollisionFlags AddToCollisionFlags2(IntPtr obj, CollisionFlags flags);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern CollisionFlags RemoveFromCollisionFlags2(IntPtr obj, CollisionFlags flags);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern float GetCcdMotionThreshold2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetCcdMotionThreshold2(IntPtr obj, float val);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern float GetCcdSweptSphereRadius2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetCcdSweptSphereRadius2(IntPtr obj, float val);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr GetUserPointer2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetUserPointer2(IntPtr obj, IntPtr val);
+
+// =====================================================================================
+// btRigidBody entries
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void ApplyGravity2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetGravity2(IntPtr obj, Vector3 val);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern Vector3 GetGravity2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetDamping2(IntPtr obj, float lin_damping, float ang_damping);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetLinearDamping2(IntPtr obj, float lin_damping);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetAngularDamping2(IntPtr obj, float ang_damping);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern float GetLinearDamping2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern float GetAngularDamping2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern float GetLinearSleepingThreshold2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern float GetAngularSleepingThreshold2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void ApplyDamping2(IntPtr obj, float timeStep);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetMassProps2(IntPtr obj, float mass, Vector3 inertia);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern Vector3 GetLinearFactor2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetLinearFactor2(IntPtr obj, Vector3 factor);
+
+    /*
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetCenterOfMassTransform2(IntPtr obj, Transform trans);
+     */
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetCenterOfMassByPosRot2(IntPtr obj, Vector3 pos, Quaternion rot);
+
+// Add a force to the object as if its mass is one.
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void ApplyCentralForce2(IntPtr obj, Vector3 force);
+
+// Set the force being applied to the object as if its mass is one.
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetObjectForce2(IntPtr obj, Vector3 force);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern Vector3 GetTotalForce2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern Vector3 GetTotalTorque2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern Vector3 GetInvInertiaDiagLocal2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetInvInertiaDiagLocal2(IntPtr obj, Vector3 inert);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetSleepingThresholds2(IntPtr obj, float lin_threshold, float ang_threshold);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void ApplyTorque2(IntPtr obj, Vector3 torque);
+
+// Apply force at the given point. Will add torque to the object.
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void ApplyForce2(IntPtr obj, Vector3 force, Vector3 pos);
+
+// Apply impulse to the object. Same as "ApplycentralForce" but force scaled by object's mass.
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void ApplyCentralImpulse2(IntPtr obj, Vector3 imp);
+
+// Apply impulse to the object's torque. Force is scaled by object's mass.
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void ApplyTorqueImpulse2(IntPtr obj, Vector3 imp);
+
+// Apply impulse at the point given. For is scaled by object's mass and effects both linear and angular forces.
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void ApplyImpulse2(IntPtr obj, Vector3 imp, Vector3 pos);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void ClearForces2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void ClearAllForces2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void UpdateInertiaTensor2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern Vector3 GetCenterOfMassPosition2(IntPtr obj);
+
+    /*
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern Transform GetCenterOfMassTransform2(IntPtr obj);
+     */
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern Vector3 GetLinearVelocity2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern Vector3 GetAngularVelocity2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetLinearVelocity2(IntPtr obj, Vector3 val);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetAngularVelocity2(IntPtr obj, Vector3 angularVelocity);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern Vector3 GetVelocityInLocalPoint2(IntPtr obj, Vector3 pos);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void Translate2(IntPtr obj, Vector3 trans);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void UpdateDeactivation2(IntPtr obj, float timeStep);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool WantsSleeping2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetAngularFactor2(IntPtr obj, float factor);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetAngularFactorV2(IntPtr obj, Vector3 factor);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern Vector3 GetAngularFactor2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool IsInWorld2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void AddConstraintRef2(IntPtr obj, IntPtr constrain);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void RemoveConstraintRef2(IntPtr obj, IntPtr constrain);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern IntPtr GetConstraintRef2(IntPtr obj, int index);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern int GetNumConstraintRefs2(IntPtr obj);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool SetCollisionGroupMask2(IntPtr body, uint filter, uint mask);
+
+// =====================================================================================
+// btCollisionShape entries
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern float GetAngularMotionDisc2(IntPtr shape);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern float GetContactBreakingThreshold2(IntPtr shape, float defaultFactor);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool IsPolyhedral2(IntPtr shape);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool IsConvex2d2(IntPtr shape);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool IsConvex2(IntPtr shape);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool IsNonMoving2(IntPtr shape);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool IsConcave2(IntPtr shape);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool IsCompound2(IntPtr shape);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool IsSoftBody2(IntPtr shape);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern bool IsInfinite2(IntPtr shape);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetLocalScaling2(IntPtr shape, Vector3 scale);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern Vector3 GetLocalScaling2(IntPtr shape);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern Vector3 CalculateLocalInertia2(IntPtr shape, float mass);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern int GetShapeType2(IntPtr shape);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void SetMargin2(IntPtr shape, float val);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern float GetMargin2(IntPtr shape);
+
+// =====================================================================================
+// Debugging
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void DumpRigidBody2(IntPtr sim, IntPtr collisionObject);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void DumpCollisionShape2(IntPtr sim, IntPtr collisionShape);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void DumpMapInfo2(IntPtr sim, IntPtr manInfo);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void DumpConstraint2(IntPtr sim, IntPtr constrain);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void DumpActivationInfo2(IntPtr sim);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void DumpAllInfo2(IntPtr sim);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void DumpPhysicsStatistics2(IntPtr sim);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void ResetBroadphasePool(IntPtr sim);
+
+[DllImport("BulletSim", CallingConvention = CallingConvention.Cdecl), SuppressUnmanagedCodeSecurity]
+public static extern void ResetConstraintSolver(IntPtr sim);
+
+}
+
+}
+
+}
diff --git a/OpenSim/Region/PhysicsModules/BulletS/BSAPIXNA.cs b/OpenSim/Region/PhysicsModules/BulletS/BSAPIXNA.cs
new file mode 100755
index 0000000..887311d
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/BSAPIXNA.cs
@@ -0,0 +1,2589 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyrightD
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+using System;
+using System.Collections.Generic;
+using System.IO;
+using System.Runtime.InteropServices;
+using System.Text;
+
+using OpenSim.Framework;
+
+using OpenMetaverse;
+
+using BulletXNA;
+using BulletXNA.LinearMath;
+using BulletXNA.BulletCollision;
+using BulletXNA.BulletDynamics;
+using BulletXNA.BulletCollision.CollisionDispatch;
+
+namespace OpenSim.Region.PhysicsModule.BulletS
+{
+public sealed class BSAPIXNA : BSAPITemplate
+{
+private sealed class BulletWorldXNA : BulletWorld
+{
+    public DiscreteDynamicsWorld world;
+    public BulletWorldXNA(uint id, BSScene physScene, DiscreteDynamicsWorld xx)
+        : base(id, physScene)
+    {
+        world = xx;
+    }
+}
+
+private sealed class BulletBodyXNA : BulletBody
+{
+    public CollisionObject body;
+    public RigidBody rigidBody { get { return RigidBody.Upcast(body); } }
+
+    public BulletBodyXNA(uint id, CollisionObject xx)
+        : base(id)
+    {
+        body = xx;
+    }
+    public override bool HasPhysicalBody
+    {
+        get { return body != null; }
+    }
+    public override void Clear()
+    {
+        body = null;
+    }
+    public override string AddrString
+    {
+        get { return "XNARigidBody"; }
+    }
+}
+
+private sealed class BulletShapeXNA : BulletShape
+{
+    public CollisionShape shape;
+    public BulletShapeXNA(CollisionShape xx, BSPhysicsShapeType typ)
+        : base()
+    {
+        shape = xx;
+        shapeType = typ;
+    }
+    public override bool HasPhysicalShape
+    {
+        get { return shape != null; }
+    }
+    public override void Clear()
+    {
+        shape = null;
+    }
+    public override BulletShape Clone()
+    {
+        return new BulletShapeXNA(shape, shapeType);
+    }
+    public override bool ReferenceSame(BulletShape other)
+    {
+        BulletShapeXNA otheru = other as BulletShapeXNA;
+        return (otheru != null) && (this.shape == otheru.shape);
+
+    }
+    public override string AddrString
+    {
+        get { return "XNACollisionShape"; }
+    }
+}
+private sealed class BulletConstraintXNA : BulletConstraint
+{
+    public TypedConstraint constrain;
+    public BulletConstraintXNA(TypedConstraint xx) : base()
+    {
+        constrain = xx;
+    }
+
+    public override void Clear()
+    {
+        constrain = null;
+    }
+    public override bool HasPhysicalConstraint { get { return constrain != null; } }
+
+    // Used for log messages for a unique display of the memory/object allocated to this instance
+    public override string AddrString
+    {
+        get { return "XNAConstraint"; }
+    }
+}
+    internal int m_maxCollisions;
+    internal CollisionDesc[] UpdatedCollisions;
+    internal int LastCollisionDesc = 0;
+    internal int m_maxUpdatesPerFrame;
+    internal int LastEntityProperty = 0;
+
+    internal EntityProperties[] UpdatedObjects;
+    internal Dictionary<uint, GhostObject> specialCollisionObjects;
+
+    private static int m_collisionsThisFrame;
+    private BSScene PhysicsScene { get; set; }
+
+    public override string BulletEngineName { get { return "BulletXNA"; } }
+    public override string BulletEngineVersion { get; protected set; }
+
+    public BSAPIXNA(string paramName, BSScene physScene)
+    {
+        PhysicsScene = physScene;
+    }
+
+    /// <summary>
+    ///
+    /// </summary>
+    /// <param name="p"></param>
+    /// <param name="p_2"></param>
+    public override bool RemoveObjectFromWorld(BulletWorld pWorld, BulletBody pBody)
+    {
+        DiscreteDynamicsWorld world = (pWorld as BulletWorldXNA).world;
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        CollisionObject collisionObject = ((BulletBodyXNA)pBody).body;
+        if (body != null)
+            world.RemoveRigidBody(body);
+        else if (collisionObject != null)
+            world.RemoveCollisionObject(collisionObject);
+        else
+            return false;
+        return true;
+    }
+
+    public override bool ClearCollisionProxyCache(BulletWorld pWorld, BulletBody pBody)
+    {
+        DiscreteDynamicsWorld world = (pWorld as BulletWorldXNA).world;
+        RigidBody body = ((BulletBodyXNA)pBody).rigidBody;
+        CollisionObject collisionObject = ((BulletBodyXNA)pBody).body;
+        if (body != null && collisionObject != null && collisionObject.GetBroadphaseHandle() != null)
+        {
+            world.RemoveCollisionObject(collisionObject);
+            world.AddCollisionObject(collisionObject);
+        }
+        return true;
+    }
+
+    public override bool AddConstraintToWorld(BulletWorld pWorld, BulletConstraint pConstraint, bool pDisableCollisionsBetweenLinkedObjects)
+    {
+        DiscreteDynamicsWorld world = (pWorld as BulletWorldXNA).world;
+        TypedConstraint constraint = (pConstraint as BulletConstraintXNA).constrain;
+        world.AddConstraint(constraint, pDisableCollisionsBetweenLinkedObjects);
+
+        return true;
+
+    }
+
+    public override bool RemoveConstraintFromWorld(BulletWorld pWorld, BulletConstraint pConstraint)
+    {
+        DiscreteDynamicsWorld world = (pWorld as BulletWorldXNA).world;
+        TypedConstraint constraint = (pConstraint as BulletConstraintXNA).constrain;
+        world.RemoveConstraint(constraint);
+        return true;
+    }
+
+    public override void SetRestitution(BulletBody pCollisionObject, float pRestitution)
+    {
+        CollisionObject collisionObject = (pCollisionObject as BulletBodyXNA).body;
+        collisionObject.SetRestitution(pRestitution);
+    }
+
+    public override int GetShapeType(BulletShape pShape)
+    {
+        CollisionShape shape = (pShape as BulletShapeXNA).shape;
+        return (int)shape.GetShapeType();
+    }
+    public override void SetMargin(BulletShape pShape, float pMargin)
+    {
+        CollisionShape shape = (pShape as BulletShapeXNA).shape;
+        shape.SetMargin(pMargin);
+    }
+
+    public override float GetMargin(BulletShape pShape)
+    {
+        CollisionShape shape = (pShape as BulletShapeXNA).shape;
+        return shape.GetMargin();
+    }
+
+    public override void SetLocalScaling(BulletShape pShape, Vector3 pScale)
+    {
+        CollisionShape shape = (pShape as BulletShapeXNA).shape;
+        IndexedVector3 vec = new IndexedVector3(pScale.X, pScale.Y, pScale.Z);
+        shape.SetLocalScaling(ref vec);
+
+    }
+
+    public override void SetContactProcessingThreshold(BulletBody pCollisionObject, float contactprocessingthreshold)
+    {
+        CollisionObject collisionObject = (pCollisionObject as BulletBodyXNA).rigidBody;
+        collisionObject.SetContactProcessingThreshold(contactprocessingthreshold);
+    }
+
+    public override void SetCcdMotionThreshold(BulletBody pCollisionObject, float pccdMotionThreashold)
+    {
+        CollisionObject collisionObject = (pCollisionObject as BulletBodyXNA).body;
+        collisionObject.SetCcdMotionThreshold(pccdMotionThreashold);
+    }
+
+    public override void SetCcdSweptSphereRadius(BulletBody pCollisionObject, float pCcdSweptSphereRadius)
+    {
+        CollisionObject collisionObject = (pCollisionObject as BulletBodyXNA).body;
+        collisionObject.SetCcdSweptSphereRadius(pCcdSweptSphereRadius);
+    }
+
+    public override void SetAngularFactorV(BulletBody pBody, Vector3 pAngularFactor)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        body.SetAngularFactor(new IndexedVector3(pAngularFactor.X, pAngularFactor.Y, pAngularFactor.Z));
+    }
+
+    public override CollisionFlags AddToCollisionFlags(BulletBody pCollisionObject, CollisionFlags pcollisionFlags)
+    {
+        CollisionObject collisionObject = (pCollisionObject as BulletBodyXNA).body;
+        CollisionFlags existingcollisionFlags = (CollisionFlags)(uint)collisionObject.GetCollisionFlags();
+        existingcollisionFlags |= pcollisionFlags;
+        collisionObject.SetCollisionFlags((BulletXNA.BulletCollision.CollisionFlags)(uint)existingcollisionFlags);
+        return (CollisionFlags) (uint) existingcollisionFlags;
+    }
+
+    public override bool AddObjectToWorld(BulletWorld pWorld, BulletBody pBody)
+    {
+        DiscreteDynamicsWorld world = (pWorld as BulletWorldXNA).world;
+        CollisionObject cbody = (pBody as BulletBodyXNA).body;
+        RigidBody rbody = cbody as RigidBody;
+
+        // Bullet resets several variables when an object is added to the world. In particular,
+        //   BulletXNA resets position and rotation. Gravity is also reset depending on the static/dynamic
+        //   type. Of course, the collision flags in the broadphase proxy are initialized to default.
+        IndexedMatrix origPos = cbody.GetWorldTransform();
+        if (rbody != null)
+        {
+            IndexedVector3 origGrav = rbody.GetGravity();
+            world.AddRigidBody(rbody);
+            rbody.SetGravity(origGrav);
+        }
+        else
+        {
+            world.AddCollisionObject(cbody);
+        }
+        cbody.SetWorldTransform(origPos);
+
+        pBody.ApplyCollisionMask(pWorld.physicsScene);
+
+        //if (body.GetBroadphaseHandle() != null)
+        //    world.UpdateSingleAabb(body);
+        return true;
+    }
+
+    public override void ForceActivationState(BulletBody pCollisionObject, ActivationState pActivationState)
+    {
+        CollisionObject collisionObject = (pCollisionObject as BulletBodyXNA).body;
+        collisionObject.ForceActivationState((BulletXNA.BulletCollision.ActivationState)(uint)pActivationState);
+    }
+
+    public override void UpdateSingleAabb(BulletWorld pWorld, BulletBody pCollisionObject)
+    {
+        DiscreteDynamicsWorld world = (pWorld as BulletWorldXNA).world;
+        CollisionObject collisionObject = (pCollisionObject as BulletBodyXNA).body;
+        world.UpdateSingleAabb(collisionObject);
+    }
+
+    public override void UpdateAabbs(BulletWorld pWorld) {
+        DiscreteDynamicsWorld world = (pWorld as BulletWorldXNA).world;
+        world.UpdateAabbs();
+    }
+    public override bool GetForceUpdateAllAabbs(BulletWorld pWorld) {
+        DiscreteDynamicsWorld world = (pWorld as BulletWorldXNA).world;
+        return world.GetForceUpdateAllAabbs();
+
+    }
+    public override void SetForceUpdateAllAabbs(BulletWorld pWorld, bool pForce)
+    {
+        DiscreteDynamicsWorld world = (pWorld as BulletWorldXNA).world;
+        world.SetForceUpdateAllAabbs(pForce);
+    }
+
+    public override bool SetCollisionGroupMask(BulletBody pCollisionObject, uint pGroup, uint pMask)
+    {
+        CollisionObject collisionObject = (pCollisionObject as BulletBodyXNA).body;
+        collisionObject.GetBroadphaseHandle().m_collisionFilterGroup = (BulletXNA.BulletCollision.CollisionFilterGroups) pGroup;
+        collisionObject.GetBroadphaseHandle().m_collisionFilterGroup = (BulletXNA.BulletCollision.CollisionFilterGroups) pGroup;
+        if ((uint) collisionObject.GetBroadphaseHandle().m_collisionFilterGroup == 0)
+            return false;
+        return true;
+    }
+
+    public override void ClearAllForces(BulletBody pCollisionObject)
+    {
+        CollisionObject collisionObject = (pCollisionObject as BulletBodyXNA).body;
+        IndexedVector3 zeroVector = new IndexedVector3(0, 0, 0);
+        collisionObject.SetInterpolationLinearVelocity(ref zeroVector);
+        collisionObject.SetInterpolationAngularVelocity(ref zeroVector);
+        IndexedMatrix bodytransform = collisionObject.GetWorldTransform();
+
+        collisionObject.SetInterpolationWorldTransform(ref bodytransform);
+
+        if (collisionObject is RigidBody)
+        {
+            RigidBody rigidbody = collisionObject as RigidBody;
+            rigidbody.SetLinearVelocity(zeroVector);
+            rigidbody.SetAngularVelocity(zeroVector);
+            rigidbody.ClearForces();
+        }
+    }
+
+    public override void SetInterpolationAngularVelocity(BulletBody pCollisionObject, Vector3 pVector3)
+    {
+        CollisionObject collisionObject = (pCollisionObject as BulletBodyXNA).rigidBody;
+        IndexedVector3 vec = new IndexedVector3(pVector3.X, pVector3.Y, pVector3.Z);
+        collisionObject.SetInterpolationAngularVelocity(ref vec);
+    }
+
+    public override void SetAngularVelocity(BulletBody pBody, Vector3 pVector3)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        IndexedVector3 vec = new IndexedVector3(pVector3.X, pVector3.Y, pVector3.Z);
+        body.SetAngularVelocity(ref vec);
+    }
+    public override Vector3 GetTotalForce(BulletBody pBody)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        IndexedVector3 iv3 = body.GetTotalForce();
+        return new Vector3(iv3.X, iv3.Y, iv3.Z);
+    }
+    public override Vector3 GetTotalTorque(BulletBody pBody)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        IndexedVector3 iv3 = body.GetTotalTorque();
+        return new Vector3(iv3.X, iv3.Y, iv3.Z);
+    }
+    public override Vector3 GetInvInertiaDiagLocal(BulletBody pBody)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        IndexedVector3 iv3 = body.GetInvInertiaDiagLocal();
+        return new Vector3(iv3.X, iv3.Y, iv3.Z);
+    }
+    public override void SetInvInertiaDiagLocal(BulletBody pBody, Vector3 inert)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        IndexedVector3 iv3 = new IndexedVector3(inert.X, inert.Y, inert.Z);
+        body.SetInvInertiaDiagLocal(ref iv3);
+    }
+    public override void ApplyForce(BulletBody pBody, Vector3 force, Vector3 pos)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        IndexedVector3 forceiv3 = new IndexedVector3(force.X, force.Y, force.Z);
+        IndexedVector3 posiv3 = new IndexedVector3(pos.X, pos.Y, pos.Z);
+        body.ApplyForce(ref forceiv3, ref posiv3);
+    }
+    public override void ApplyImpulse(BulletBody pBody, Vector3 imp, Vector3 pos)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        IndexedVector3 impiv3 = new IndexedVector3(imp.X, imp.Y, imp.Z);
+        IndexedVector3 posiv3 = new IndexedVector3(pos.X, pos.Y, pos.Z);
+        body.ApplyImpulse(ref impiv3, ref posiv3);
+    }
+
+    public override void ClearForces(BulletBody pBody)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        body.ClearForces();
+    }
+
+    public override void SetTranslation(BulletBody pCollisionObject, Vector3 _position, Quaternion _orientation)
+    {
+        CollisionObject collisionObject = (pCollisionObject as BulletBodyXNA).body;
+        IndexedVector3 vposition = new IndexedVector3(_position.X, _position.Y, _position.Z);
+        IndexedQuaternion vquaternion = new IndexedQuaternion(_orientation.X, _orientation.Y, _orientation.Z,
+                                                              _orientation.W);
+        IndexedMatrix mat = IndexedMatrix.CreateFromQuaternion(vquaternion);
+        mat._origin = vposition;
+        collisionObject.SetWorldTransform(mat);
+
+    }
+
+    public override Vector3 GetPosition(BulletBody pCollisionObject)
+    {
+        CollisionObject collisionObject = (pCollisionObject as BulletBodyXNA).rigidBody;
+        IndexedVector3 pos = collisionObject.GetInterpolationWorldTransform()._origin;
+        return new Vector3(pos.X, pos.Y, pos.Z);
+    }
+
+    public override Vector3 CalculateLocalInertia(BulletShape pShape, float pphysMass)
+    {
+        CollisionShape shape = (pShape as BulletShapeXNA).shape;
+        IndexedVector3 inertia = IndexedVector3.Zero;
+        shape.CalculateLocalInertia(pphysMass, out inertia);
+        return new Vector3(inertia.X, inertia.Y, inertia.Z);
+    }
+
+    public override void SetMassProps(BulletBody pBody, float pphysMass, Vector3 plocalInertia)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        if (body != null) // Can't set mass props on collision object.
+        {
+            IndexedVector3 inertia = new IndexedVector3(plocalInertia.X, plocalInertia.Y, plocalInertia.Z);
+            body.SetMassProps(pphysMass, inertia);
+        }
+    }
+
+
+    public override void SetObjectForce(BulletBody pBody, Vector3 _force)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        IndexedVector3 force = new IndexedVector3(_force.X, _force.Y, _force.Z);
+        body.SetTotalForce(ref force);
+    }
+
+    public override void SetFriction(BulletBody pCollisionObject, float _currentFriction)
+    {
+        CollisionObject collisionObject = (pCollisionObject as BulletBodyXNA).body;
+        collisionObject.SetFriction(_currentFriction);
+    }
+
+    public override void SetLinearVelocity(BulletBody pBody, Vector3 _velocity)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        IndexedVector3 velocity = new IndexedVector3(_velocity.X, _velocity.Y, _velocity.Z);
+        body.SetLinearVelocity(velocity);
+    }
+
+    public override void Activate(BulletBody pCollisionObject, bool pforceactivation)
+    {
+        CollisionObject collisionObject = (pCollisionObject as BulletBodyXNA).rigidBody;
+        collisionObject.Activate(pforceactivation);
+
+    }
+
+    public override Quaternion GetOrientation(BulletBody pCollisionObject)
+    {
+        CollisionObject collisionObject = (pCollisionObject as BulletBodyXNA).rigidBody;
+        IndexedQuaternion mat = collisionObject.GetInterpolationWorldTransform().GetRotation();
+        return new Quaternion(mat.X, mat.Y, mat.Z, mat.W);
+    }
+
+    public override CollisionFlags RemoveFromCollisionFlags(BulletBody pCollisionObject, CollisionFlags pcollisionFlags)
+    {
+        CollisionObject collisionObject = (pCollisionObject as BulletBodyXNA).body;
+        CollisionFlags existingcollisionFlags = (CollisionFlags)(uint)collisionObject.GetCollisionFlags();
+        existingcollisionFlags &= ~pcollisionFlags;
+        collisionObject.SetCollisionFlags((BulletXNA.BulletCollision.CollisionFlags)(uint)existingcollisionFlags);
+        return (CollisionFlags)(uint)existingcollisionFlags;
+    }
+
+    public override float GetCcdMotionThreshold(BulletBody pCollisionObject)
+    {
+        CollisionObject collisionObject = (pCollisionObject as BulletBodyXNA).rigidBody;
+        return collisionObject.GetCcdSquareMotionThreshold();
+    }
+
+    public override float GetCcdSweptSphereRadius(BulletBody pCollisionObject)
+    {
+        CollisionObject collisionObject = (pCollisionObject as BulletBodyXNA).rigidBody;
+        return collisionObject.GetCcdSweptSphereRadius();
+
+    }
+
+    public override IntPtr GetUserPointer(BulletBody pCollisionObject)
+    {
+        CollisionObject shape = (pCollisionObject as BulletBodyXNA).body;
+        return (IntPtr)shape.GetUserPointer();
+    }
+
+    public override void SetUserPointer(BulletBody pCollisionObject, IntPtr val)
+    {
+        CollisionObject shape = (pCollisionObject as BulletBodyXNA).body;
+        shape.SetUserPointer(val);
+    }
+
+    public override void SetGravity(BulletBody pBody, Vector3 pGravity)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        if (body != null) // Can't set collisionobject.set gravity
+        {
+            IndexedVector3 gravity = new IndexedVector3(pGravity.X, pGravity.Y, pGravity.Z);
+            body.SetGravity(gravity);
+        }
+    }
+
+    public override bool DestroyConstraint(BulletWorld pWorld, BulletConstraint pConstraint)
+    {
+        DiscreteDynamicsWorld world = (pWorld as BulletWorldXNA).world;
+        TypedConstraint constraint = (pConstraint as BulletConstraintXNA).constrain;
+        world.RemoveConstraint(constraint);
+        return true;
+    }
+
+    public override bool SetLinearLimits(BulletConstraint pConstraint, Vector3 low, Vector3 high)
+    {
+        Generic6DofConstraint constraint = (pConstraint as BulletConstraintXNA).constrain as Generic6DofConstraint;
+        IndexedVector3 lowlimit = new IndexedVector3(low.X, low.Y, low.Z);
+        IndexedVector3 highlimit = new IndexedVector3(high.X, high.Y, high.Z);
+        constraint.SetLinearLowerLimit(lowlimit);
+        constraint.SetLinearUpperLimit(highlimit);
+        return true;
+    }
+
+    public override bool SetAngularLimits(BulletConstraint pConstraint, Vector3 low, Vector3 high)
+    {
+        Generic6DofConstraint constraint = (pConstraint as BulletConstraintXNA).constrain as Generic6DofConstraint;
+        IndexedVector3 lowlimit = new IndexedVector3(low.X, low.Y, low.Z);
+        IndexedVector3 highlimit = new IndexedVector3(high.X, high.Y, high.Z);
+        constraint.SetAngularLowerLimit(lowlimit);
+        constraint.SetAngularUpperLimit(highlimit);
+        return true;
+    }
+
+    public override void SetConstraintNumSolverIterations(BulletConstraint pConstraint, float cnt)
+    {
+        Generic6DofConstraint constraint = (pConstraint as BulletConstraintXNA).constrain as Generic6DofConstraint;
+        constraint.SetOverrideNumSolverIterations((int)cnt);
+    }
+
+    public override bool CalculateTransforms(BulletConstraint pConstraint)
+    {
+        Generic6DofConstraint constraint = (pConstraint as BulletConstraintXNA).constrain as Generic6DofConstraint;
+        constraint.CalculateTransforms();
+        return true;
+    }
+
+    public override void SetConstraintEnable(BulletConstraint pConstraint, float p_2)
+    {
+        Generic6DofConstraint constraint = (pConstraint as BulletConstraintXNA).constrain as Generic6DofConstraint;
+        constraint.SetEnabled((p_2 == 0) ? false : true);
+    }
+
+
+    public override BulletConstraint Create6DofConstraint(BulletWorld pWorld, BulletBody pBody1, BulletBody pBody2,
+                                    Vector3 pframe1, Quaternion pframe1rot, Vector3 pframe2, Quaternion pframe2rot,
+                                    bool puseLinearReferenceFrameA, bool pdisableCollisionsBetweenLinkedBodies)
+
+    {
+        DiscreteDynamicsWorld world = (pWorld as BulletWorldXNA).world;
+        RigidBody body1 = (pBody1 as BulletBodyXNA).rigidBody;
+        RigidBody body2 = (pBody2 as BulletBodyXNA).rigidBody;
+        IndexedVector3 frame1v = new IndexedVector3(pframe1.X, pframe1.Y, pframe1.Z);
+        IndexedQuaternion frame1rot = new IndexedQuaternion(pframe1rot.X, pframe1rot.Y, pframe1rot.Z, pframe1rot.W);
+        IndexedMatrix frame1 = IndexedMatrix.CreateFromQuaternion(frame1rot);
+        frame1._origin = frame1v;
+
+        IndexedVector3 frame2v = new IndexedVector3(pframe2.X, pframe2.Y, pframe2.Z);
+        IndexedQuaternion frame2rot = new IndexedQuaternion(pframe2rot.X, pframe2rot.Y, pframe2rot.Z, pframe2rot.W);
+        IndexedMatrix frame2 = IndexedMatrix.CreateFromQuaternion(frame2rot);
+        frame2._origin = frame1v;
+
+        Generic6DofConstraint consttr = new Generic6DofConstraint(body1, body2, ref frame1, ref frame2,
+                                                                  puseLinearReferenceFrameA);
+        consttr.CalculateTransforms();
+        world.AddConstraint(consttr,pdisableCollisionsBetweenLinkedBodies);
+
+        return new BulletConstraintXNA(consttr);
+    }
+
+    public override BulletConstraint Create6DofConstraintFixed(BulletWorld pWorld, BulletBody pBody1,
+                                        Vector3 pframe1, Quaternion pframe1rot,
+                                        bool pUseLinearReferenceFrameB, bool pdisableCollisionsBetweenLinkedBodies)
+    {
+        DiscreteDynamicsWorld world = (pWorld as BulletWorldXNA).world;
+        RigidBody body1 = (pBody1 as BulletBodyXNA).rigidBody;
+        IndexedVector3 frame1v = new IndexedVector3(pframe1.X, pframe1.Y, pframe1.Z);
+        IndexedQuaternion frame1rot = new IndexedQuaternion(pframe1rot.X, pframe1rot.Y, pframe1rot.Z, pframe1rot.W);
+        IndexedMatrix frame1 = IndexedMatrix.CreateFromQuaternion(frame1rot);
+        frame1._origin = frame1v;
+
+        Generic6DofConstraint consttr = new Generic6DofConstraint(body1, ref frame1, pUseLinearReferenceFrameB);
+        consttr.CalculateTransforms();
+        world.AddConstraint(consttr,pdisableCollisionsBetweenLinkedBodies);
+
+        return new BulletConstraintXNA(consttr);
+    }
+
+    /// <summary>
+    ///
+    /// </summary>
+    /// <param name="pWorld"></param>
+    /// <param name="pBody1"></param>
+    /// <param name="pBody2"></param>
+    /// <param name="pjoinPoint"></param>
+    /// <param name="puseLinearReferenceFrameA"></param>
+    /// <param name="pdisableCollisionsBetweenLinkedBodies"></param>
+    /// <returns></returns>
+    public override BulletConstraint Create6DofConstraintToPoint(BulletWorld pWorld, BulletBody pBody1, BulletBody pBody2, Vector3 pjoinPoint, bool puseLinearReferenceFrameA, bool pdisableCollisionsBetweenLinkedBodies)
+    {
+        DiscreteDynamicsWorld world = (pWorld as BulletWorldXNA).world;
+        RigidBody body1 = (pBody1 as BulletBodyXNA).rigidBody;
+        RigidBody body2 = (pBody2 as BulletBodyXNA).rigidBody;
+        IndexedMatrix frame1 = new IndexedMatrix(IndexedBasisMatrix.Identity, new IndexedVector3(0, 0, 0));
+        IndexedMatrix frame2 = new IndexedMatrix(IndexedBasisMatrix.Identity, new IndexedVector3(0, 0, 0));
+
+        IndexedVector3 joinPoint = new IndexedVector3(pjoinPoint.X, pjoinPoint.Y, pjoinPoint.Z);
+        IndexedMatrix mat = IndexedMatrix.Identity;
+        mat._origin = new IndexedVector3(pjoinPoint.X, pjoinPoint.Y, pjoinPoint.Z);
+        frame1._origin = body1.GetWorldTransform().Inverse()*joinPoint;
+        frame2._origin = body2.GetWorldTransform().Inverse()*joinPoint;
+
+        Generic6DofConstraint consttr = new Generic6DofConstraint(body1, body2, ref frame1, ref frame2, puseLinearReferenceFrameA);
+        consttr.CalculateTransforms();
+        world.AddConstraint(consttr, pdisableCollisionsBetweenLinkedBodies);
+
+        return new BulletConstraintXNA(consttr);
+    }
+    //SetFrames(m_constraint.ptr, frameA, frameArot, frameB, frameBrot);
+    public override bool SetFrames(BulletConstraint pConstraint, Vector3 pframe1, Quaternion pframe1rot, Vector3 pframe2, Quaternion pframe2rot)
+    {
+        Generic6DofConstraint constraint = (pConstraint as BulletConstraintXNA).constrain as Generic6DofConstraint;
+        IndexedVector3 frame1v = new IndexedVector3(pframe1.X, pframe1.Y, pframe1.Z);
+        IndexedQuaternion frame1rot = new IndexedQuaternion(pframe1rot.X, pframe1rot.Y, pframe1rot.Z, pframe1rot.W);
+        IndexedMatrix frame1 = IndexedMatrix.CreateFromQuaternion(frame1rot);
+        frame1._origin = frame1v;
+
+        IndexedVector3 frame2v = new IndexedVector3(pframe2.X, pframe2.Y, pframe2.Z);
+        IndexedQuaternion frame2rot = new IndexedQuaternion(pframe2rot.X, pframe2rot.Y, pframe2rot.Z, pframe2rot.W);
+        IndexedMatrix frame2 = IndexedMatrix.CreateFromQuaternion(frame2rot);
+        frame2._origin = frame2v;
+        constraint.SetFrames(ref frame1, ref frame2);
+        return true;
+    }
+
+    public override Vector3 GetLinearVelocity(BulletBody pBody)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        IndexedVector3 iv3 = body.GetLinearVelocity();
+        return new Vector3(iv3.X, iv3.Y, iv3.Z);
+    }
+    public override Vector3 GetAngularVelocity(BulletBody pBody)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        IndexedVector3 iv3 = body.GetAngularVelocity();
+        return new Vector3(iv3.X, iv3.Y, iv3.Z);
+    }
+    public override Vector3 GetVelocityInLocalPoint(BulletBody pBody, Vector3 pos)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        IndexedVector3 posiv3 = new IndexedVector3(pos.X, pos.Y, pos.Z);
+        IndexedVector3 iv3 = body.GetVelocityInLocalPoint(ref posiv3);
+        return new Vector3(iv3.X, iv3.Y, iv3.Z);
+    }
+    public override void Translate(BulletBody pCollisionObject, Vector3 trans)
+    {
+        CollisionObject collisionObject = (pCollisionObject as BulletBodyXNA).rigidBody;
+        collisionObject.Translate(new IndexedVector3(trans.X,trans.Y,trans.Z));
+    }
+    public override void UpdateDeactivation(BulletBody pBody, float timeStep)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        body.UpdateDeactivation(timeStep);
+    }
+
+    public override bool WantsSleeping(BulletBody pBody)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        return body.WantsSleeping();
+    }
+
+    public override void SetAngularFactor(BulletBody pBody, float factor)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        body.SetAngularFactor(factor);
+    }
+
+    public override Vector3 GetAngularFactor(BulletBody pBody)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        IndexedVector3 iv3 =  body.GetAngularFactor();
+        return new Vector3(iv3.X, iv3.Y, iv3.Z);
+    }
+
+    public override bool IsInWorld(BulletWorld pWorld, BulletBody pCollisionObject)
+    {
+        DiscreteDynamicsWorld world = (pWorld as BulletWorldXNA).world;
+        CollisionObject collisionObject = (pCollisionObject as BulletBodyXNA).body;
+        return world.IsInWorld(collisionObject);
+    }
+
+    public override void AddConstraintRef(BulletBody pBody, BulletConstraint pConstraint)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        TypedConstraint constrain = (pConstraint as BulletConstraintXNA).constrain;
+        body.AddConstraintRef(constrain);
+    }
+
+    public override void RemoveConstraintRef(BulletBody pBody, BulletConstraint pConstraint)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        TypedConstraint constrain = (pConstraint as BulletConstraintXNA).constrain;
+        body.RemoveConstraintRef(constrain);
+    }
+
+    public override BulletConstraint GetConstraintRef(BulletBody pBody, int index)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        return new BulletConstraintXNA(body.GetConstraintRef(index));
+    }
+
+    public override int GetNumConstraintRefs(BulletBody pBody)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        return body.GetNumConstraintRefs();
+    }
+
+    public override void SetInterpolationLinearVelocity(BulletBody pCollisionObject, Vector3 VehicleVelocity)
+    {
+        CollisionObject collisionObject = (pCollisionObject as BulletBodyXNA).rigidBody;
+        IndexedVector3 velocity = new IndexedVector3(VehicleVelocity.X, VehicleVelocity.Y, VehicleVelocity.Z);
+        collisionObject.SetInterpolationLinearVelocity(ref velocity);
+    }
+
+    public override bool UseFrameOffset(BulletConstraint pConstraint, float onOff)
+    {
+        Generic6DofConstraint constraint = (pConstraint as BulletConstraintXNA).constrain as Generic6DofConstraint;
+        constraint.SetUseFrameOffset((onOff == 0) ? false : true);
+        return true;
+    }
+    //SetBreakingImpulseThreshold(m_constraint.ptr, threshold);
+    public override bool SetBreakingImpulseThreshold(BulletConstraint pConstraint, float threshold)
+    {
+        Generic6DofConstraint constraint = (pConstraint as BulletConstraintXNA).constrain as Generic6DofConstraint;
+        constraint.SetBreakingImpulseThreshold(threshold);
+        return true;
+    }
+    public override bool HingeSetLimits(BulletConstraint pConstraint, float low, float high, float softness, float bias, float relaxation)
+    {
+        HingeConstraint constraint = (pConstraint as BulletConstraintXNA).constrain as HingeConstraint;
+        if (softness == HINGE_NOT_SPECIFIED)
+            constraint.SetLimit(low, high);
+        else
+            constraint.SetLimit(low, high, softness, bias, relaxation);
+        return true;
+    }
+    public override bool SpringEnable(BulletConstraint pConstraint, int index, float numericTrueFalse)
+    {
+        Generic6DofSpringConstraint constraint = (pConstraint as BulletConstraintXNA).constrain as Generic6DofSpringConstraint;
+        constraint.EnableSpring(index, (numericTrueFalse == 0f ? false : true));
+        return true;
+    }
+
+    public override bool SpringSetEquilibriumPoint(BulletConstraint pConstraint, int index, float equilibriumPoint)
+    {
+        Generic6DofSpringConstraint constraint = (pConstraint as BulletConstraintXNA).constrain as Generic6DofSpringConstraint;
+        if (index == SPRING_NOT_SPECIFIED)
+        {
+            constraint.SetEquilibriumPoint();
+        }
+        else
+        {
+            if (equilibriumPoint == SPRING_NOT_SPECIFIED)
+                constraint.SetEquilibriumPoint(index);
+            else
+                constraint.SetEquilibriumPoint(index, equilibriumPoint);
+        }
+        return true;
+    }
+
+    public override bool SpringSetStiffness(BulletConstraint pConstraint, int index, float stiffness)
+    {
+        Generic6DofSpringConstraint constraint = (pConstraint as BulletConstraintXNA).constrain as Generic6DofSpringConstraint;
+        constraint.SetStiffness(index, stiffness);
+        return true;
+    }
+
+    public override bool SpringSetDamping(BulletConstraint pConstraint, int index, float damping)
+    {
+        Generic6DofSpringConstraint constraint = (pConstraint as BulletConstraintXNA).constrain as Generic6DofSpringConstraint;
+        constraint.SetDamping(index, damping);
+        return true;
+    }
+
+    public override bool SliderSetLimits(BulletConstraint pConstraint, int lowerUpper, int linAng, float val)
+    {
+        SliderConstraint constraint = (pConstraint as BulletConstraintXNA).constrain as SliderConstraint;
+                switch (lowerUpper)
+                {
+                        case SLIDER_LOWER_LIMIT:
+                                switch (linAng)
+                                {
+                                        case SLIDER_LINEAR:
+                                                constraint.SetLowerLinLimit(val);
+                                                break;
+                                        case SLIDER_ANGULAR:
+                                                constraint.SetLowerAngLimit(val);
+                                                break;
+                                }
+                                break;
+                        case SLIDER_UPPER_LIMIT:
+                                switch (linAng)
+                                {
+                                        case SLIDER_LINEAR:
+                                                constraint.SetUpperLinLimit(val);
+                                                break;
+                                        case SLIDER_ANGULAR:
+                                                constraint.SetUpperAngLimit(val);
+                                                break;
+                                }
+                                break;
+                }
+        return true;
+    }
+    public override bool SliderSet(BulletConstraint pConstraint, int softRestDamp, int dirLimOrtho, int linAng, float val)
+    {
+        SliderConstraint constraint = (pConstraint as BulletConstraintXNA).constrain as SliderConstraint;
+                switch (softRestDamp)
+                {
+                        case SLIDER_SET_SOFTNESS:
+                                switch (dirLimOrtho)
+                                {
+                                        case SLIDER_SET_DIRECTION:
+                                                switch (linAng)
+                                                {
+                                                        case SLIDER_LINEAR: constraint.SetSoftnessDirLin(val); break;
+                                                        case SLIDER_ANGULAR: constraint.SetSoftnessDirAng(val); break;
+                                                }
+                                                break;
+                                        case SLIDER_SET_LIMIT:
+                                                switch (linAng)
+                                                {
+                                                        case SLIDER_LINEAR: constraint.SetSoftnessLimLin(val); break;
+                                                        case SLIDER_ANGULAR: constraint.SetSoftnessLimAng(val); break;
+                                                }
+                                                break;
+                                        case SLIDER_SET_ORTHO:
+                                                switch (linAng)
+                                                {
+                                                        case SLIDER_LINEAR: constraint.SetSoftnessOrthoLin(val); break;
+                                                        case SLIDER_ANGULAR: constraint.SetSoftnessOrthoAng(val); break;
+                                                }
+                                                break;
+                                }
+                                break;
+                        case SLIDER_SET_RESTITUTION:
+                                switch (dirLimOrtho)
+                                {
+                                        case SLIDER_SET_DIRECTION:
+                                                switch (linAng)
+                                                {
+                                                        case SLIDER_LINEAR: constraint.SetRestitutionDirLin(val); break;
+                                                        case SLIDER_ANGULAR: constraint.SetRestitutionDirAng(val); break;
+                                                }
+                                                break;
+                                        case SLIDER_SET_LIMIT:
+                                                switch (linAng)
+                                                {
+                                                        case SLIDER_LINEAR: constraint.SetRestitutionLimLin(val); break;
+                                                        case SLIDER_ANGULAR: constraint.SetRestitutionLimAng(val); break;
+                                                }
+                                                break;
+                                        case SLIDER_SET_ORTHO:
+                                                switch (linAng)
+                                                {
+                                                        case SLIDER_LINEAR: constraint.SetRestitutionOrthoLin(val); break;
+                                                        case SLIDER_ANGULAR: constraint.SetRestitutionOrthoAng(val); break;
+                                                }
+                                                break;
+                                }
+                                break;
+                        case SLIDER_SET_DAMPING:
+                                switch (dirLimOrtho)
+                                {
+                                        case SLIDER_SET_DIRECTION:
+                                                switch (linAng)
+                                                {
+                                                        case SLIDER_LINEAR: constraint.SetDampingDirLin(val); break;
+                                                        case SLIDER_ANGULAR: constraint.SetDampingDirAng(val); break;
+                                                }
+                                                break;
+                                        case SLIDER_SET_LIMIT:
+                                                switch (linAng)
+                                                {
+                                                        case SLIDER_LINEAR: constraint.SetDampingLimLin(val); break;
+                                                        case SLIDER_ANGULAR: constraint.SetDampingLimAng(val); break;
+                                                }
+                                                break;
+                                        case SLIDER_SET_ORTHO:
+                                                switch (linAng)
+                                                {
+                                                        case SLIDER_LINEAR: constraint.SetDampingOrthoLin(val); break;
+                                                        case SLIDER_ANGULAR: constraint.SetDampingOrthoAng(val); break;
+                                                }
+                                                break;
+                                }
+                                break;
+                }
+        return true;
+    }
+    public override bool SliderMotorEnable(BulletConstraint pConstraint, int linAng, float numericTrueFalse)
+    {
+        SliderConstraint constraint = (pConstraint as BulletConstraintXNA).constrain as SliderConstraint;
+                switch (linAng)
+                {
+                        case SLIDER_LINEAR:
+                                constraint.SetPoweredLinMotor(numericTrueFalse == 0.0 ? false : true);
+                                break;
+                        case SLIDER_ANGULAR:
+                                constraint.SetPoweredAngMotor(numericTrueFalse == 0.0 ? false : true);
+                                break;
+                }
+        return true;
+    }
+    public override bool SliderMotor(BulletConstraint pConstraint, int forceVel, int linAng, float val)
+    {
+        SliderConstraint constraint = (pConstraint as BulletConstraintXNA).constrain as SliderConstraint;
+                switch (forceVel)
+                {
+                        case SLIDER_MOTOR_VELOCITY:
+                                switch (linAng)
+                                {
+                                        case SLIDER_LINEAR:
+                                                constraint.SetTargetLinMotorVelocity(val);
+                                                break;
+                                        case SLIDER_ANGULAR:
+                                                constraint.SetTargetAngMotorVelocity(val);
+                                                break;
+                                }
+                                break;
+                        case SLIDER_MAX_MOTOR_FORCE:
+                                switch (linAng)
+                                {
+                                        case SLIDER_LINEAR:
+                                                constraint.SetMaxLinMotorForce(val);
+                                                break;
+                                        case SLIDER_ANGULAR:
+                                                constraint.SetMaxAngMotorForce(val);
+                                                break;
+                                }
+                                break;
+                }
+        return true;
+    }
+
+    //BulletSimAPI.SetAngularDamping(Prim.PhysBody.ptr, angularDamping);
+    public override void SetAngularDamping(BulletBody pBody, float angularDamping)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        float lineardamping = body.GetLinearDamping();
+        body.SetDamping(lineardamping, angularDamping);
+
+    }
+
+    public override void UpdateInertiaTensor(BulletBody pBody)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        if (body != null)  // can't update inertia tensor on CollisionObject
+            body.UpdateInertiaTensor();
+    }
+
+    public override void RecalculateCompoundShapeLocalAabb(BulletShape pCompoundShape)
+    {
+        CompoundShape shape = (pCompoundShape as BulletShapeXNA).shape as CompoundShape;
+        shape.RecalculateLocalAabb();
+    }
+
+    //BulletSimAPI.GetCollisionFlags(PhysBody.ptr)
+    public override CollisionFlags GetCollisionFlags(BulletBody pCollisionObject)
+    {
+        CollisionObject collisionObject = (pCollisionObject as BulletBodyXNA).rigidBody;
+        uint flags = (uint)collisionObject.GetCollisionFlags();
+        return (CollisionFlags) flags;
+    }
+
+    public override void SetDamping(BulletBody pBody, float pLinear, float pAngular)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        body.SetDamping(pLinear, pAngular);
+    }
+    //PhysBody.ptr, PhysicsScene.Params.deactivationTime);
+    public override void SetDeactivationTime(BulletBody pCollisionObject, float pDeactivationTime)
+    {
+        CollisionObject collisionObject = (pCollisionObject as BulletBodyXNA).rigidBody;
+        collisionObject.SetDeactivationTime(pDeactivationTime);
+    }
+    //SetSleepingThresholds(PhysBody.ptr, PhysicsScene.Params.linearSleepingThreshold, PhysicsScene.Params.angularSleepingThreshold);
+    public override void SetSleepingThresholds(BulletBody pBody, float plinearSleepingThreshold, float pangularSleepingThreshold)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        body.SetSleepingThresholds(plinearSleepingThreshold, pangularSleepingThreshold);
+    }
+
+    public override CollisionObjectTypes GetBodyType(BulletBody pCollisionObject)
+    {
+        CollisionObject collisionObject = (pCollisionObject as BulletBodyXNA).body;
+        return (CollisionObjectTypes)(int) collisionObject.GetInternalType();
+    }
+
+    public override void ApplyGravity(BulletBody pBody)
+    {
+
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        body.ApplyGravity();
+    }
+
+    public override Vector3 GetGravity(BulletBody pBody)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        IndexedVector3 gravity = body.GetGravity();
+        return new Vector3(gravity.X, gravity.Y, gravity.Z);
+    }
+
+    public override void SetLinearDamping(BulletBody pBody, float lin_damping)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        float angularDamping = body.GetAngularDamping();
+        body.SetDamping(lin_damping, angularDamping);
+    }
+
+    public override float GetLinearDamping(BulletBody pBody)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        return body.GetLinearDamping();
+    }
+
+    public override float GetAngularDamping(BulletBody pBody)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        return body.GetAngularDamping();
+    }
+
+    public override float GetLinearSleepingThreshold(BulletBody pBody)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        return body.GetLinearSleepingThreshold();
+    }
+
+    public override void ApplyDamping(BulletBody pBody, float timeStep)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        body.ApplyDamping(timeStep);
+    }
+
+    public override Vector3 GetLinearFactor(BulletBody pBody)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        IndexedVector3 linearFactor = body.GetLinearFactor();
+        return new Vector3(linearFactor.X, linearFactor.Y, linearFactor.Z);
+    }
+
+    public override void SetLinearFactor(BulletBody pBody, Vector3 factor)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        body.SetLinearFactor(new IndexedVector3(factor.X, factor.Y, factor.Z));
+    }
+
+    public override void SetCenterOfMassByPosRot(BulletBody pBody, Vector3 pos, Quaternion rot)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        IndexedQuaternion quat = new IndexedQuaternion(rot.X, rot.Y, rot.Z,rot.W);
+        IndexedMatrix mat = IndexedMatrix.CreateFromQuaternion(quat);
+        mat._origin = new IndexedVector3(pos.X, pos.Y, pos.Z);
+        body.SetCenterOfMassTransform( ref mat);
+        /* TODO: double check this */
+    }
+
+    //BulletSimAPI.ApplyCentralForce(PhysBody.ptr, fSum);
+    public override void ApplyCentralForce(BulletBody pBody, Vector3 pfSum)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        IndexedVector3 fSum = new IndexedVector3(pfSum.X, pfSum.Y, pfSum.Z);
+        body.ApplyCentralForce(ref fSum);
+    }
+    public override void ApplyCentralImpulse(BulletBody pBody, Vector3 pfSum)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        IndexedVector3 fSum = new IndexedVector3(pfSum.X, pfSum.Y, pfSum.Z);
+        body.ApplyCentralImpulse(ref fSum);
+    }
+    public override void ApplyTorque(BulletBody pBody, Vector3 pfSum)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        IndexedVector3 fSum = new IndexedVector3(pfSum.X, pfSum.Y, pfSum.Z);
+        body.ApplyTorque(ref fSum);
+    }
+    public override void ApplyTorqueImpulse(BulletBody pBody, Vector3 pfSum)
+    {
+        RigidBody body = (pBody as BulletBodyXNA).rigidBody;
+        IndexedVector3 fSum = new IndexedVector3(pfSum.X, pfSum.Y, pfSum.Z);
+        body.ApplyTorqueImpulse(ref fSum);
+    }
+
+    public override void DestroyObject(BulletWorld pWorld, BulletBody pBody)
+    {
+        DiscreteDynamicsWorld world = (pWorld as BulletWorldXNA).world;
+        CollisionObject co = (pBody as BulletBodyXNA).rigidBody;
+        RigidBody bo = co as RigidBody;
+        if (bo == null)
+        {
+
+            if (world.IsInWorld(co))
+            {
+                world.RemoveCollisionObject(co);
+            }
+        }
+        else
+        {
+
+            if (world.IsInWorld(bo))
+            {
+                world.RemoveRigidBody(bo);
+            }
+        }
+        if (co != null)
+        {
+            if (co.GetUserPointer() != null)
+            {
+                uint localId = (uint) co.GetUserPointer();
+                if (specialCollisionObjects.ContainsKey(localId))
+                {
+                    specialCollisionObjects.Remove(localId);
+                }
+            }
+        }
+
+    }
+
+    public override void Shutdown(BulletWorld pWorld)
+    {
+        DiscreteDynamicsWorld world = (pWorld as BulletWorldXNA).world;
+        world.Cleanup();
+    }
+
+    public override BulletShape DuplicateCollisionShape(BulletWorld pWorld, BulletShape pShape, uint id)
+    {
+        CollisionShape shape1 = (pShape as BulletShapeXNA).shape;
+
+        // TODO:  Turn this from a reference copy to a Value Copy.
+        BulletShapeXNA shape2 = new BulletShapeXNA(shape1, BSShapeTypeFromBroadPhaseNativeType(shape1.GetShapeType()));
+
+        return shape2;
+    }
+
+    public override bool DeleteCollisionShape(BulletWorld pWorld, BulletShape pShape)
+    {
+        //TODO:
+        return false;
+    }
+    //(sim.ptr, shape.ptr, prim.LocalID, prim.RawPosition, prim.RawOrientation);
+
+    public override BulletBody CreateBodyFromShape(BulletWorld pWorld, BulletShape pShape, uint pLocalID, Vector3 pRawPosition, Quaternion pRawOrientation)
+    {
+        CollisionWorld world = (pWorld as BulletWorldXNA).world;
+        IndexedMatrix mat =
+            IndexedMatrix.CreateFromQuaternion(new IndexedQuaternion(pRawOrientation.X, pRawOrientation.Y,
+                                                                     pRawOrientation.Z, pRawOrientation.W));
+        mat._origin = new IndexedVector3(pRawPosition.X, pRawPosition.Y, pRawPosition.Z);
+        CollisionShape shape = (pShape as BulletShapeXNA).shape;
+        //UpdateSingleAabb(world, shape);
+        // TODO: Feed Update array into null
+        SimMotionState motionState = new SimMotionState(this, pLocalID, mat, null);
+        RigidBody body = new RigidBody(0,motionState,shape,IndexedVector3.Zero);
+        RigidBodyConstructionInfo constructionInfo = new RigidBodyConstructionInfo(0, motionState, shape, IndexedVector3.Zero)
+                                                         {
+                                                             m_mass = 0
+                                                         };
+        /*
+            m_mass = mass;
+                        m_motionState =motionState;
+                        m_collisionShape = collisionShape;
+                        m_localInertia = localInertia;
+                        m_linearDamping = 0f;
+                        m_angularDamping = 0f;
+                        m_friction = 0.5f;
+                        m_restitution = 0f;
+                        m_linearSleepingThreshold = 0.8f;
+                        m_angularSleepingThreshold = 1f;
+                        m_additionalDamping = false;
+                        m_additionalDampingFactor = 0.005f;
+                        m_additionalLinearDampingThresholdSqr = 0.01f;
+                        m_additionalAngularDampingThresholdSqr = 0.01f;
+                        m_additionalAngularDampingFactor = 0.01f;
+            m_startWorldTransform = IndexedMatrix.Identity;
+        */
+        body.SetUserPointer(pLocalID);
+
+        return new BulletBodyXNA(pLocalID, body);
+    }
+
+
+    public override BulletBody CreateBodyWithDefaultMotionState( BulletShape pShape, uint pLocalID, Vector3 pRawPosition, Quaternion pRawOrientation)
+    {
+
+        IndexedMatrix mat =
+            IndexedMatrix.CreateFromQuaternion(new IndexedQuaternion(pRawOrientation.X, pRawOrientation.Y,
+                                                                     pRawOrientation.Z, pRawOrientation.W));
+        mat._origin = new IndexedVector3(pRawPosition.X, pRawPosition.Y, pRawPosition.Z);
+
+        CollisionShape shape = (pShape as BulletShapeXNA).shape;
+
+        // TODO: Feed Update array into null
+        RigidBody body = new RigidBody(0, new DefaultMotionState( mat, IndexedMatrix.Identity), shape, IndexedVector3.Zero);
+        body.SetWorldTransform(mat);
+        body.SetUserPointer(pLocalID);
+        return new BulletBodyXNA(pLocalID, body);
+    }
+    //(m_mapInfo.terrainBody.ptr, CollisionFlags.CF_STATIC_OBJECT);
+    public override CollisionFlags SetCollisionFlags(BulletBody pCollisionObject, CollisionFlags collisionFlags)
+    {
+        CollisionObject collisionObject = (pCollisionObject as BulletBodyXNA).rigidBody;
+        collisionObject.SetCollisionFlags((BulletXNA.BulletCollision.CollisionFlags) (uint) collisionFlags);
+        return (CollisionFlags)collisionObject.GetCollisionFlags();
+    }
+
+    public override Vector3 GetAnisotripicFriction(BulletConstraint pconstrain)
+    {
+
+        /* TODO */
+        return Vector3.Zero;
+    }
+    public override Vector3 SetAnisotripicFriction(BulletConstraint pconstrain, Vector3 frict) { /* TODO */ return Vector3.Zero; }
+    public override bool HasAnisotripicFriction(BulletConstraint pconstrain) { /* TODO */ return false; }
+    public override float GetContactProcessingThreshold(BulletBody pBody) { /* TODO */ return 0f; }
+    public override bool IsStaticObject(BulletBody pCollisionObject)
+    {
+        CollisionObject collisionObject = (pCollisionObject as BulletBodyXNA).rigidBody;
+        return collisionObject.IsStaticObject();
+
+    }
+    public override bool IsKinematicObject(BulletBody pCollisionObject)
+    {
+        CollisionObject collisionObject = (pCollisionObject as BulletBodyXNA).rigidBody;
+        return collisionObject.IsKinematicObject();
+    }
+    public override bool IsStaticOrKinematicObject(BulletBody pCollisionObject)
+    {
+        CollisionObject collisionObject = (pCollisionObject as BulletBodyXNA).rigidBody;
+        return collisionObject.IsStaticOrKinematicObject();
+    }
+    public override bool HasContactResponse(BulletBody pCollisionObject)
+    {
+        CollisionObject collisionObject = (pCollisionObject as BulletBodyXNA).rigidBody;
+        return collisionObject.HasContactResponse();
+    }
+    public override int GetActivationState(BulletBody pBody) { /* TODO */ return 0; }
+    public override void SetActivationState(BulletBody pBody, int state) { /* TODO */ }
+    public override float GetDeactivationTime(BulletBody pBody) { /* TODO */ return 0f; }
+    public override bool IsActive(BulletBody pBody) { /* TODO */ return false; }
+    public override float GetRestitution(BulletBody pBody) { /* TODO */ return 0f; }
+    public override float GetFriction(BulletBody pBody) { /* TODO */ return 0f; }
+    public override void SetInterpolationVelocity(BulletBody pBody, Vector3 linearVel, Vector3 angularVel) { /* TODO */ }
+    public override float GetHitFraction(BulletBody pBody) { /* TODO */ return 0f; }
+
+    //(m_mapInfo.terrainBody.ptr, PhysicsScene.Params.terrainHitFraction);
+    public override void SetHitFraction(BulletBody pCollisionObject, float pHitFraction)
+    {
+        CollisionObject collisionObject = (pCollisionObject as BulletBodyXNA).rigidBody;
+        collisionObject.SetHitFraction(pHitFraction);
+    }
+    //BuildCapsuleShape(physicsScene.World.ptr, 1f, 1f, prim.Scale);
+    public override BulletShape BuildCapsuleShape(BulletWorld pWorld, float pRadius, float pHeight, Vector3 pScale)
+    {
+        DiscreteDynamicsWorld world = (pWorld as BulletWorldXNA).world;
+        IndexedVector3 scale = new IndexedVector3(pScale.X, pScale.Y, pScale.Z);
+        CapsuleShapeZ capsuleShapeZ = new CapsuleShapeZ(pRadius, pHeight);
+        capsuleShapeZ.SetMargin(world.WorldSettings.Params.collisionMargin);
+        capsuleShapeZ.SetLocalScaling(ref scale);
+
+        return new BulletShapeXNA(capsuleShapeZ, BSPhysicsShapeType.SHAPE_CAPSULE); ;
+    }
+
+    public override BulletWorld Initialize(Vector3 maxPosition, ConfigurationParameters parms,
+                                            int maxCollisions, ref CollisionDesc[] collisionArray,
+                                            int maxUpdates, ref EntityProperties[] updateArray
+                                            )
+    {
+
+        UpdatedObjects = updateArray;
+        UpdatedCollisions = collisionArray;
+        /* TODO */
+        ConfigurationParameters[] configparms = new ConfigurationParameters[1];
+        configparms[0] = parms;
+        Vector3 worldExtent = maxPosition;
+        m_maxCollisions = maxCollisions;
+        m_maxUpdatesPerFrame = maxUpdates;
+        specialCollisionObjects = new Dictionary<uint, GhostObject>();
+
+        return new BulletWorldXNA(1, PhysicsScene, BSAPIXNA.Initialize2(worldExtent, configparms, maxCollisions, ref collisionArray, maxUpdates, ref updateArray, null));
+    }
+
+    private static DiscreteDynamicsWorld Initialize2(Vector3 worldExtent,
+                        ConfigurationParameters[] o,
+                        int mMaxCollisionsPerFrame, ref CollisionDesc[] collisionArray,
+                        int mMaxUpdatesPerFrame, ref EntityProperties[] updateArray,
+                        object mDebugLogCallbackHandle)
+    {
+        CollisionWorld.WorldData.ParamData p = new CollisionWorld.WorldData.ParamData();
+
+        p.angularDamping = BSParam.AngularDamping;
+        p.defaultFriction = o[0].defaultFriction;
+        p.defaultFriction = o[0].defaultFriction;
+        p.defaultDensity = o[0].defaultDensity;
+        p.defaultRestitution = o[0].defaultRestitution;
+        p.collisionMargin = o[0].collisionMargin;
+        p.gravity = o[0].gravity;
+
+        p.linearDamping = BSParam.LinearDamping;
+        p.angularDamping = BSParam.AngularDamping;
+        p.deactivationTime = BSParam.DeactivationTime;
+        p.linearSleepingThreshold = BSParam.LinearSleepingThreshold;
+        p.angularSleepingThreshold = BSParam.AngularSleepingThreshold;
+        p.ccdMotionThreshold = BSParam.CcdMotionThreshold;
+        p.ccdSweptSphereRadius = BSParam.CcdSweptSphereRadius;
+        p.contactProcessingThreshold = BSParam.ContactProcessingThreshold;
+
+        p.terrainImplementation = BSParam.TerrainImplementation;
+        p.terrainFriction = BSParam.TerrainFriction;
+
+        p.terrainHitFraction = BSParam.TerrainHitFraction;
+        p.terrainRestitution = BSParam.TerrainRestitution;
+        p.terrainCollisionMargin = BSParam.TerrainCollisionMargin;
+
+        p.avatarFriction = BSParam.AvatarFriction;
+        p.avatarStandingFriction = BSParam.AvatarStandingFriction;
+        p.avatarDensity = BSParam.AvatarDensity;
+        p.avatarRestitution = BSParam.AvatarRestitution;
+        p.avatarCapsuleWidth = BSParam.AvatarCapsuleWidth;
+        p.avatarCapsuleDepth = BSParam.AvatarCapsuleDepth;
+        p.avatarCapsuleHeight = BSParam.AvatarCapsuleHeight;
+        p.avatarContactProcessingThreshold = BSParam.AvatarContactProcessingThreshold;
+
+        p.vehicleAngularDamping = BSParam.VehicleAngularDamping;
+
+        p.maxPersistantManifoldPoolSize = o[0].maxPersistantManifoldPoolSize;
+        p.maxCollisionAlgorithmPoolSize = o[0].maxCollisionAlgorithmPoolSize;
+        p.shouldDisableContactPoolDynamicAllocation = o[0].shouldDisableContactPoolDynamicAllocation;
+        p.shouldForceUpdateAllAabbs = o[0].shouldForceUpdateAllAabbs;
+        p.shouldRandomizeSolverOrder = o[0].shouldRandomizeSolverOrder;
+        p.shouldSplitSimulationIslands = o[0].shouldSplitSimulationIslands;
+        p.shouldEnableFrictionCaching = o[0].shouldEnableFrictionCaching;
+        p.numberOfSolverIterations = o[0].numberOfSolverIterations;
+
+        p.linksetImplementation = BSParam.LinksetImplementation;
+        p.linkConstraintUseFrameOffset = BSParam.NumericBool(BSParam.LinkConstraintUseFrameOffset);
+        p.linkConstraintEnableTransMotor = BSParam.NumericBool(BSParam.LinkConstraintEnableTransMotor);
+        p.linkConstraintTransMotorMaxVel = BSParam.LinkConstraintTransMotorMaxVel;
+        p.linkConstraintTransMotorMaxForce = BSParam.LinkConstraintTransMotorMaxForce;
+        p.linkConstraintERP = BSParam.LinkConstraintERP;
+        p.linkConstraintCFM = BSParam.LinkConstraintCFM;
+        p.linkConstraintSolverIterations = BSParam.LinkConstraintSolverIterations;
+        p.physicsLoggingFrames = o[0].physicsLoggingFrames;
+        DefaultCollisionConstructionInfo ccci = new DefaultCollisionConstructionInfo();
+
+        DefaultCollisionConfiguration cci = new DefaultCollisionConfiguration();
+        CollisionDispatcher m_dispatcher = new CollisionDispatcher(cci);
+
+
+        if (p.maxPersistantManifoldPoolSize > 0)
+            cci.m_persistentManifoldPoolSize = (int)p.maxPersistantManifoldPoolSize;
+        if (p.shouldDisableContactPoolDynamicAllocation !=0)
+            m_dispatcher.SetDispatcherFlags(DispatcherFlags.CD_DISABLE_CONTACTPOOL_DYNAMIC_ALLOCATION);
+        //if (p.maxCollisionAlgorithmPoolSize >0 )
+
+        DbvtBroadphase m_broadphase = new DbvtBroadphase();
+        //IndexedVector3 aabbMin = new IndexedVector3(0, 0, 0);
+        //IndexedVector3 aabbMax = new IndexedVector3(256, 256, 256);
+
+        //AxisSweep3Internal m_broadphase2 = new AxisSweep3Internal(ref aabbMin, ref aabbMax, Convert.ToInt32(0xfffe), 0xffff, ushort.MaxValue/2, null, true);
+        m_broadphase.GetOverlappingPairCache().SetInternalGhostPairCallback(new GhostPairCallback());
+
+        SequentialImpulseConstraintSolver m_solver = new SequentialImpulseConstraintSolver();
+
+        DiscreteDynamicsWorld world = new DiscreteDynamicsWorld(m_dispatcher, m_broadphase, m_solver, cci);
+
+        world.LastCollisionDesc = 0;
+        world.LastEntityProperty = 0;
+
+        world.WorldSettings.Params = p;
+        world.SetForceUpdateAllAabbs(p.shouldForceUpdateAllAabbs != 0);
+        world.GetSolverInfo().m_solverMode = SolverMode.SOLVER_USE_WARMSTARTING | SolverMode.SOLVER_SIMD;
+        if (p.shouldRandomizeSolverOrder != 0)
+            world.GetSolverInfo().m_solverMode |= SolverMode.SOLVER_RANDMIZE_ORDER;
+
+        world.GetSimulationIslandManager().SetSplitIslands(p.shouldSplitSimulationIslands != 0);
+        //world.GetDispatchInfo().m_enableSatConvex Not implemented in C# port
+
+        if (p.shouldEnableFrictionCaching != 0)
+            world.GetSolverInfo().m_solverMode |= SolverMode.SOLVER_ENABLE_FRICTION_DIRECTION_CACHING;
+
+        if (p.numberOfSolverIterations > 0)
+            world.GetSolverInfo().m_numIterations = (int) p.numberOfSolverIterations;
+
+
+        world.GetSolverInfo().m_damping = world.WorldSettings.Params.linearDamping;
+        world.GetSolverInfo().m_restitution = world.WorldSettings.Params.defaultRestitution;
+        world.GetSolverInfo().m_globalCfm = 0.0f;
+        world.GetSolverInfo().m_tau = 0.6f;
+        world.GetSolverInfo().m_friction = 0.3f;
+        world.GetSolverInfo().m_maxErrorReduction = 20f;
+        world.GetSolverInfo().m_numIterations = 10;
+        world.GetSolverInfo().m_erp = 0.2f;
+        world.GetSolverInfo().m_erp2 = 0.1f;
+        world.GetSolverInfo().m_sor = 1.0f;
+        world.GetSolverInfo().m_splitImpulse = false;
+        world.GetSolverInfo().m_splitImpulsePenetrationThreshold = -0.02f;
+        world.GetSolverInfo().m_linearSlop = 0.0f;
+        world.GetSolverInfo().m_warmstartingFactor = 0.85f;
+        world.GetSolverInfo().m_restingContactRestitutionThreshold = 2;
+        world.SetForceUpdateAllAabbs(true);
+
+        //BSParam.TerrainImplementation = 0;
+        world.SetGravity(new IndexedVector3(0,0,p.gravity));
+
+        // Turn off Pooling since globals and pooling are bad for threading.
+        BulletGlobals.VoronoiSimplexSolverPool.SetPoolingEnabled(false);
+        BulletGlobals.SubSimplexConvexCastPool.SetPoolingEnabled(false);
+        BulletGlobals.ManifoldPointPool.SetPoolingEnabled(false);
+        BulletGlobals.CastResultPool.SetPoolingEnabled(false);
+        BulletGlobals.SphereShapePool.SetPoolingEnabled(false);
+        BulletGlobals.DbvtNodePool.SetPoolingEnabled(false);
+        BulletGlobals.SingleRayCallbackPool.SetPoolingEnabled(false);
+        BulletGlobals.SubSimplexClosestResultPool.SetPoolingEnabled(false);
+        BulletGlobals.GjkPairDetectorPool.SetPoolingEnabled(false);
+        BulletGlobals.DbvtTreeColliderPool.SetPoolingEnabled(false);
+        BulletGlobals.SingleSweepCallbackPool.SetPoolingEnabled(false);
+        BulletGlobals.BroadphaseRayTesterPool.SetPoolingEnabled(false);
+        BulletGlobals.ClosestNotMeConvexResultCallbackPool.SetPoolingEnabled(false);
+        BulletGlobals.GjkEpaPenetrationDepthSolverPool.SetPoolingEnabled(false);
+        BulletGlobals.ContinuousConvexCollisionPool.SetPoolingEnabled(false);
+        BulletGlobals.DbvtStackDataBlockPool.SetPoolingEnabled(false);
+
+        BulletGlobals.BoxBoxCollisionAlgorithmPool.SetPoolingEnabled(false);
+        BulletGlobals.CompoundCollisionAlgorithmPool.SetPoolingEnabled(false);
+        BulletGlobals.ConvexConcaveCollisionAlgorithmPool.SetPoolingEnabled(false);
+        BulletGlobals.ConvexConvexAlgorithmPool.SetPoolingEnabled(false);
+        BulletGlobals.ConvexPlaneAlgorithmPool.SetPoolingEnabled(false);
+        BulletGlobals.SphereBoxCollisionAlgorithmPool.SetPoolingEnabled(false);
+        BulletGlobals.SphereSphereCollisionAlgorithmPool.SetPoolingEnabled(false);
+        BulletGlobals.SphereTriangleCollisionAlgorithmPool.SetPoolingEnabled(false);
+        BulletGlobals.GImpactCollisionAlgorithmPool.SetPoolingEnabled(false);
+        BulletGlobals.GjkEpaSolver2MinkowskiDiffPool.SetPoolingEnabled(false);
+        BulletGlobals.PersistentManifoldPool.SetPoolingEnabled(false);
+        BulletGlobals.ManifoldResultPool.SetPoolingEnabled(false);
+        BulletGlobals.GJKPool.SetPoolingEnabled(false);
+        BulletGlobals.GIM_ShapeRetrieverPool.SetPoolingEnabled(false);
+        BulletGlobals.TriangleShapePool.SetPoolingEnabled(false);
+        BulletGlobals.SphereTriangleDetectorPool.SetPoolingEnabled(false);
+        BulletGlobals.CompoundLeafCallbackPool.SetPoolingEnabled(false);
+        BulletGlobals.GjkConvexCastPool.SetPoolingEnabled(false);
+        BulletGlobals.LocalTriangleSphereCastCallbackPool.SetPoolingEnabled(false);
+        BulletGlobals.BridgeTriangleRaycastCallbackPool.SetPoolingEnabled(false);
+        BulletGlobals.BridgeTriangleConcaveRaycastCallbackPool.SetPoolingEnabled(false);
+        BulletGlobals.BridgeTriangleConvexcastCallbackPool.SetPoolingEnabled(false);
+        BulletGlobals.MyNodeOverlapCallbackPool.SetPoolingEnabled(false);
+        BulletGlobals.ClosestRayResultCallbackPool.SetPoolingEnabled(false);
+        BulletGlobals.DebugDrawcallbackPool.SetPoolingEnabled(false);
+
+        return world;
+    }
+    //m_constraint.ptr, ConstraintParams.BT_CONSTRAINT_STOP_CFM, cfm, ConstraintParamAxis.AXIS_ALL
+    public override bool SetConstraintParam(BulletConstraint pConstraint, ConstraintParams paramIndex, float paramvalue, ConstraintParamAxis axis)
+    {
+        Generic6DofConstraint constrain = (pConstraint as BulletConstraintXNA).constrain as Generic6DofConstraint;
+        if (axis == ConstraintParamAxis.AXIS_LINEAR_ALL || axis == ConstraintParamAxis.AXIS_ALL)
+        {
+            constrain.SetParam((BulletXNA.BulletDynamics.ConstraintParams) (int) paramIndex, paramvalue, 0);
+            constrain.SetParam((BulletXNA.BulletDynamics.ConstraintParams) (int) paramIndex, paramvalue, 1);
+            constrain.SetParam((BulletXNA.BulletDynamics.ConstraintParams) (int) paramIndex, paramvalue, 2);
+        }
+        if (axis == ConstraintParamAxis.AXIS_ANGULAR_ALL || axis == ConstraintParamAxis.AXIS_ALL)
+        {
+            constrain.SetParam((BulletXNA.BulletDynamics.ConstraintParams)(int)paramIndex, paramvalue, 3);
+            constrain.SetParam((BulletXNA.BulletDynamics.ConstraintParams)(int)paramIndex, paramvalue, 4);
+            constrain.SetParam((BulletXNA.BulletDynamics.ConstraintParams)(int)paramIndex, paramvalue, 5);
+        }
+        if (axis == ConstraintParamAxis.AXIS_LINEAR_ALL)
+        {
+            constrain.SetParam((BulletXNA.BulletDynamics.ConstraintParams)(int)paramIndex, paramvalue, (int)axis);
+        }
+        return true;
+    }
+
+    public override bool PushUpdate(BulletBody pCollisionObject)
+    {
+        bool ret = false;
+        CollisionObject collisionObject = (pCollisionObject as BulletBodyXNA).rigidBody;
+        RigidBody rb = collisionObject as RigidBody;
+        if (rb != null)
+        {
+            SimMotionState sms = rb.GetMotionState() as SimMotionState;
+            if (sms != null)
+            {
+                IndexedMatrix wt = IndexedMatrix.Identity;
+                sms.GetWorldTransform(out wt);
+                sms.SetWorldTransform(ref wt, true);
+                ret = true;
+            }
+        }
+        return ret;
+
+    }
+
+    public override float GetAngularMotionDisc(BulletShape pShape)
+    {
+        CollisionShape shape = (pShape as BulletShapeXNA).shape;
+        return shape.GetAngularMotionDisc();
+    }
+    public override float GetContactBreakingThreshold(BulletShape pShape, float defaultFactor)
+    {
+        CollisionShape shape = (pShape as BulletShapeXNA).shape;
+        return shape.GetContactBreakingThreshold(defaultFactor);
+    }
+    public override bool IsCompound(BulletShape pShape)
+    {
+        CollisionShape shape = (pShape as BulletShapeXNA).shape;
+        return shape.IsCompound();
+    }
+    public override bool IsSoftBody(BulletShape pShape)
+    {
+        CollisionShape shape = (pShape as BulletShapeXNA).shape;
+        return shape.IsSoftBody();
+    }
+    public override bool IsPolyhedral(BulletShape pShape)
+    {
+        CollisionShape shape = (pShape as BulletShapeXNA).shape;
+        return shape.IsPolyhedral();
+    }
+    public override bool IsConvex2d(BulletShape pShape)
+    {
+        CollisionShape shape = (pShape as BulletShapeXNA).shape;
+        return shape.IsConvex2d();
+    }
+    public override bool IsConvex(BulletShape pShape)
+    {
+        CollisionShape shape = (pShape as BulletShapeXNA).shape;
+        return shape.IsConvex();
+    }
+    public override bool IsNonMoving(BulletShape pShape)
+    {
+        CollisionShape shape = (pShape as BulletShapeXNA).shape;
+        return shape.IsNonMoving();
+    }
+    public override bool IsConcave(BulletShape pShape)
+    {
+        CollisionShape shape = (pShape as BulletShapeXNA).shape;
+        return shape.IsConcave();
+    }
+    public override bool IsInfinite(BulletShape pShape)
+    {
+        CollisionShape shape = (pShape as BulletShapeXNA).shape;
+        return shape.IsInfinite();
+    }
+    public override bool IsNativeShape(BulletShape pShape)
+    {
+        CollisionShape shape = (pShape as BulletShapeXNA).shape;
+        bool ret;
+        switch (shape.GetShapeType())
+        {
+            case BroadphaseNativeTypes.BOX_SHAPE_PROXYTYPE:
+                case BroadphaseNativeTypes.CONE_SHAPE_PROXYTYPE:
+                case BroadphaseNativeTypes.SPHERE_SHAPE_PROXYTYPE:
+                case BroadphaseNativeTypes.CYLINDER_SHAPE_PROXYTYPE:
+                ret = true;
+                break;
+            default:
+                ret = false;
+                break;
+        }
+        return ret;
+    }
+
+    public override void SetShapeCollisionMargin(BulletShape pShape, float pMargin)
+    {
+        CollisionShape shape = (pShape as BulletShapeXNA).shape;
+        shape.SetMargin(pMargin);
+    }
+
+    //sim.ptr, shape.ptr,prim.LocalID, prim.RawPosition, prim.RawOrientation
+    public override BulletBody CreateGhostFromShape(BulletWorld pWorld, BulletShape pShape, uint pLocalID, Vector3 pRawPosition, Quaternion pRawOrientation)
+    {
+        DiscreteDynamicsWorld world = (pWorld as BulletWorldXNA).world;
+        IndexedMatrix bodyTransform = new IndexedMatrix();
+        bodyTransform._origin = new IndexedVector3(pRawPosition.X, pRawPosition.Y, pRawPosition.Z);
+        bodyTransform.SetRotation(new IndexedQuaternion(pRawOrientation.X,pRawOrientation.Y,pRawOrientation.Z,pRawOrientation.W));
+        GhostObject gObj = new PairCachingGhostObject();
+        gObj.SetWorldTransform(bodyTransform);
+        CollisionShape shape = (pShape as BulletShapeXNA).shape;
+        gObj.SetCollisionShape(shape);
+        gObj.SetUserPointer(pLocalID);
+
+        if (specialCollisionObjects.ContainsKey(pLocalID))
+            specialCollisionObjects[pLocalID] = gObj;
+        else
+            specialCollisionObjects.Add(pLocalID, gObj);
+
+        // TODO: Add to Special CollisionObjects!
+        return new BulletBodyXNA(pLocalID, gObj);
+    }
+
+    public override void SetCollisionShape(BulletWorld pWorld, BulletBody pCollisionObject, BulletShape pShape)
+    {
+        DiscreteDynamicsWorld world = (pWorld as BulletWorldXNA).world;
+        CollisionObject collisionObject = (pCollisionObject as BulletBodyXNA).body;
+        if (pShape == null)
+        {
+            collisionObject.SetCollisionShape(new EmptyShape());
+        }
+        else
+        {
+            CollisionShape shape = (pShape as BulletShapeXNA).shape;
+            collisionObject.SetCollisionShape(shape);
+        }
+    }
+    public override BulletShape GetCollisionShape(BulletBody pCollisionObject)
+    {
+        CollisionObject collisionObject = (pCollisionObject as BulletBodyXNA).rigidBody;
+        CollisionShape shape = collisionObject.GetCollisionShape();
+        return new BulletShapeXNA(shape, BSShapeTypeFromBroadPhaseNativeType(shape.GetShapeType()));
+    }
+
+    //(PhysicsScene.World.ptr, nativeShapeData)
+    public override BulletShape BuildNativeShape(BulletWorld pWorld, ShapeData pShapeData)
+    {
+        DiscreteDynamicsWorld world = (pWorld as BulletWorldXNA).world;
+        CollisionShape shape = null;
+        switch (pShapeData.Type)
+        {
+            case BSPhysicsShapeType.SHAPE_BOX:
+                shape = new BoxShape(new IndexedVector3(0.5f,0.5f,0.5f));
+                break;
+            case BSPhysicsShapeType.SHAPE_CONE:
+                shape = new ConeShapeZ(0.5f, 1.0f);
+                break;
+            case BSPhysicsShapeType.SHAPE_CYLINDER:
+                shape = new CylinderShapeZ(new IndexedVector3(0.5f, 0.5f, 0.5f));
+                break;
+            case BSPhysicsShapeType.SHAPE_SPHERE:
+                shape = new SphereShape(0.5f);
+                break;
+
+        }
+        if (shape != null)
+        {
+            IndexedVector3 scaling = new IndexedVector3(pShapeData.Scale.X, pShapeData.Scale.Y, pShapeData.Scale.Z);
+            shape.SetMargin(world.WorldSettings.Params.collisionMargin);
+            shape.SetLocalScaling(ref scaling);
+
+        }
+        return new BulletShapeXNA(shape, pShapeData.Type);
+    }
+    //PhysicsScene.World.ptr, false
+    public override BulletShape CreateCompoundShape(BulletWorld pWorld, bool enableDynamicAabbTree)
+    {
+        return new BulletShapeXNA(new CompoundShape(enableDynamicAabbTree), BSPhysicsShapeType.SHAPE_COMPOUND);
+    }
+
+    public override int GetNumberOfCompoundChildren(BulletShape pCompoundShape)
+    {
+        CompoundShape compoundshape = (pCompoundShape as BulletShapeXNA).shape as CompoundShape;
+        return compoundshape.GetNumChildShapes();
+    }
+    //LinksetRoot.PhysShape.ptr, newShape.ptr, displacementPos, displacementRot
+    public override void AddChildShapeToCompoundShape(BulletShape pCShape, BulletShape paddShape, Vector3 displacementPos, Quaternion displacementRot)
+    {
+        IndexedMatrix relativeTransform = new IndexedMatrix();
+        CompoundShape compoundshape = (pCShape as BulletShapeXNA).shape as CompoundShape;
+        CollisionShape addshape = (paddShape as BulletShapeXNA).shape;
+
+        relativeTransform._origin = new IndexedVector3(displacementPos.X, displacementPos.Y, displacementPos.Z);
+        relativeTransform.SetRotation(new IndexedQuaternion(displacementRot.X,displacementRot.Y,displacementRot.Z,displacementRot.W));
+        compoundshape.AddChildShape(ref relativeTransform, addshape);
+
+    }
+
+    public override BulletShape RemoveChildShapeFromCompoundShapeIndex(BulletShape pCShape, int pii)
+    {
+        CompoundShape compoundshape = (pCShape as BulletShapeXNA).shape as CompoundShape;
+        CollisionShape ret = null;
+        ret = compoundshape.GetChildShape(pii);
+        compoundshape.RemoveChildShapeByIndex(pii);
+        return new BulletShapeXNA(ret, BSShapeTypeFromBroadPhaseNativeType(ret.GetShapeType()));
+    }
+
+    public override BulletShape GetChildShapeFromCompoundShapeIndex(BulletShape cShape, int indx) {
+
+        if (cShape == null)
+            return null;
+        CompoundShape compoundShape = (cShape as BulletShapeXNA).shape as CompoundShape;
+        CollisionShape shape = compoundShape.GetChildShape(indx);
+        BulletShape retShape = new BulletShapeXNA(shape, BSShapeTypeFromBroadPhaseNativeType(shape.GetShapeType()));
+
+
+        return retShape;
+    }
+
+    public BSPhysicsShapeType BSShapeTypeFromBroadPhaseNativeType(BroadphaseNativeTypes pin)
+    {
+        BSPhysicsShapeType ret = BSPhysicsShapeType.SHAPE_UNKNOWN;
+        switch (pin)
+        {
+            case BroadphaseNativeTypes.BOX_SHAPE_PROXYTYPE:
+                ret =  BSPhysicsShapeType.SHAPE_BOX;
+                break;
+            case BroadphaseNativeTypes.TRIANGLE_SHAPE_PROXYTYPE:
+                ret =  BSPhysicsShapeType.SHAPE_UNKNOWN;
+                break;
+
+            case BroadphaseNativeTypes.TETRAHEDRAL_SHAPE_PROXYTYPE:
+                ret =  BSPhysicsShapeType.SHAPE_UNKNOWN;
+                break;
+            case BroadphaseNativeTypes.CONVEX_TRIANGLEMESH_SHAPE_PROXYTYPE:
+                ret =  BSPhysicsShapeType.SHAPE_CONVEXHULL;
+                break;
+            case BroadphaseNativeTypes.CONVEX_HULL_SHAPE_PROXYTYPE:
+                ret =  BSPhysicsShapeType.SHAPE_HULL;
+                break;
+            case BroadphaseNativeTypes.CONVEX_POINT_CLOUD_SHAPE_PROXYTYPE:
+                ret =  BSPhysicsShapeType.SHAPE_UNKNOWN;
+                break;
+            case BroadphaseNativeTypes.CUSTOM_POLYHEDRAL_SHAPE_TYPE:
+                ret =  BSPhysicsShapeType.SHAPE_UNKNOWN;
+                break;
+            //implicit convex shapes
+            case BroadphaseNativeTypes.IMPLICIT_CONVEX_SHAPES_START_HERE:
+                ret =  BSPhysicsShapeType.SHAPE_UNKNOWN;
+                break;
+            case BroadphaseNativeTypes.SPHERE_SHAPE_PROXYTYPE:
+                ret =  BSPhysicsShapeType.SHAPE_SPHERE;
+                break;
+            case BroadphaseNativeTypes.MULTI_SPHERE_SHAPE_PROXYTYPE:
+                ret =  BSPhysicsShapeType.SHAPE_UNKNOWN;
+                break;
+            case BroadphaseNativeTypes.CAPSULE_SHAPE_PROXYTYPE:
+                ret =  BSPhysicsShapeType.SHAPE_CAPSULE;
+                break;
+            case BroadphaseNativeTypes.CONE_SHAPE_PROXYTYPE:
+                ret =  BSPhysicsShapeType.SHAPE_CONE;
+                break;
+            case BroadphaseNativeTypes.CONVEX_SHAPE_PROXYTYPE:
+                ret =  BSPhysicsShapeType.SHAPE_CONVEXHULL;
+                break;
+            case BroadphaseNativeTypes.CYLINDER_SHAPE_PROXYTYPE:
+                ret =  BSPhysicsShapeType.SHAPE_CYLINDER;
+                break;
+            case BroadphaseNativeTypes.UNIFORM_SCALING_SHAPE_PROXYTYPE:
+                ret =  BSPhysicsShapeType.SHAPE_UNKNOWN;
+                break;
+            case BroadphaseNativeTypes.MINKOWSKI_SUM_SHAPE_PROXYTYPE:
+                ret =  BSPhysicsShapeType.SHAPE_UNKNOWN;
+                break;
+            case BroadphaseNativeTypes.MINKOWSKI_DIFFERENCE_SHAPE_PROXYTYPE:
+                ret =  BSPhysicsShapeType.SHAPE_UNKNOWN;
+                break;
+            case BroadphaseNativeTypes.BOX_2D_SHAPE_PROXYTYPE:
+                ret =  BSPhysicsShapeType.SHAPE_UNKNOWN;
+                break;
+            case BroadphaseNativeTypes.CONVEX_2D_SHAPE_PROXYTYPE:
+                ret =  BSPhysicsShapeType.SHAPE_UNKNOWN;
+                break;
+            case BroadphaseNativeTypes.CUSTOM_CONVEX_SHAPE_TYPE:
+                ret =  BSPhysicsShapeType.SHAPE_UNKNOWN;
+                break;
+            //concave shape
+            case BroadphaseNativeTypes.CONCAVE_SHAPES_START_HERE:
+                ret =  BSPhysicsShapeType.SHAPE_UNKNOWN;
+                break;
+            //keep all the convex shapetype below here, for the check IsConvexShape in broadphase proxy!
+            case BroadphaseNativeTypes.TRIANGLE_MESH_SHAPE_PROXYTYPE:
+                ret =  BSPhysicsShapeType.SHAPE_MESH;
+                break;
+            case BroadphaseNativeTypes.SCALED_TRIANGLE_MESH_SHAPE_PROXYTYPE:
+                ret =  BSPhysicsShapeType.SHAPE_MESH;
+                break;
+            ///used for demo integration FAST/Swift collision library and Bullet
+            case BroadphaseNativeTypes.FAST_CONCAVE_MESH_PROXYTYPE:
+                ret =  BSPhysicsShapeType.SHAPE_MESH;
+                break;
+            //terrain
+            case BroadphaseNativeTypes.TERRAIN_SHAPE_PROXYTYPE:
+                ret =  BSPhysicsShapeType.SHAPE_HEIGHTMAP;
+                break;
+            ///Used for GIMPACT Trimesh integration
+            case BroadphaseNativeTypes.GIMPACT_SHAPE_PROXYTYPE:
+                ret =  BSPhysicsShapeType.SHAPE_GIMPACT;
+                break;
+            ///Multimaterial mesh
+            case BroadphaseNativeTypes.MULTIMATERIAL_TRIANGLE_MESH_PROXYTYPE:
+                ret =  BSPhysicsShapeType.SHAPE_MESH;
+                break;
+
+            case BroadphaseNativeTypes.EMPTY_SHAPE_PROXYTYPE:
+                ret =  BSPhysicsShapeType.SHAPE_UNKNOWN;
+                break;
+            case BroadphaseNativeTypes.STATIC_PLANE_PROXYTYPE:
+                ret =  BSPhysicsShapeType.SHAPE_GROUNDPLANE;
+                break;
+            case BroadphaseNativeTypes.CUSTOM_CONCAVE_SHAPE_TYPE:
+                ret =  BSPhysicsShapeType.SHAPE_UNKNOWN;
+                break;
+            case BroadphaseNativeTypes.CONCAVE_SHAPES_END_HERE:
+                ret =  BSPhysicsShapeType.SHAPE_UNKNOWN;
+                break;
+
+            case BroadphaseNativeTypes.COMPOUND_SHAPE_PROXYTYPE:
+                ret =  BSPhysicsShapeType.SHAPE_COMPOUND;
+                break;
+
+            case BroadphaseNativeTypes.SOFTBODY_SHAPE_PROXYTYPE:
+                ret =  BSPhysicsShapeType.SHAPE_MESH;
+                break;
+            case BroadphaseNativeTypes.HFFLUID_SHAPE_PROXYTYPE:
+                ret =  BSPhysicsShapeType.SHAPE_UNKNOWN;
+                break;
+            case BroadphaseNativeTypes.HFFLUID_BUOYANT_CONVEX_SHAPE_PROXYTYPE:
+                ret =  BSPhysicsShapeType.SHAPE_UNKNOWN;
+                break;
+            case BroadphaseNativeTypes.INVALID_SHAPE_PROXYTYPE:
+                ret =  BSPhysicsShapeType.SHAPE_UNKNOWN;
+                break;
+        }
+        return ret;
+    }
+
+    public override void RemoveChildShapeFromCompoundShape(BulletShape cShape, BulletShape removeShape) { /* TODO */ }
+    public override void UpdateChildTransform(BulletShape pShape, int childIndex, Vector3 pos, Quaternion rot, bool shouldRecalculateLocalAabb) { /* TODO */ }
+
+    public override BulletShape CreateGroundPlaneShape(uint pLocalId, float pheight, float pcollisionMargin)
+    {
+        StaticPlaneShape m_planeshape = new StaticPlaneShape(new IndexedVector3(0,0,1),(int)pheight );
+        m_planeshape.SetMargin(pcollisionMargin);
+        m_planeshape.SetUserPointer(pLocalId);
+        return new BulletShapeXNA(m_planeshape, BSPhysicsShapeType.SHAPE_GROUNDPLANE);
+    }
+
+    public override BulletConstraint Create6DofSpringConstraint(BulletWorld pWorld, BulletBody pBody1, BulletBody pBody2,
+                                    Vector3 pframe1, Quaternion pframe1rot, Vector3 pframe2, Quaternion pframe2rot,
+                                    bool puseLinearReferenceFrameA, bool pdisableCollisionsBetweenLinkedBodies)
+
+    {
+        Generic6DofSpringConstraint constrain = null;
+        DiscreteDynamicsWorld world = (pWorld as BulletWorldXNA).world;
+        RigidBody body1 = (pBody1 as BulletBodyXNA).rigidBody;
+        RigidBody body2 = (pBody2 as BulletBodyXNA).rigidBody;
+        if (body1 != null && body2 != null)
+        {
+            IndexedVector3 frame1v = new IndexedVector3(pframe1.X, pframe1.Y, pframe1.Z);
+            IndexedQuaternion frame1rot = new IndexedQuaternion(pframe1rot.X, pframe1rot.Y, pframe1rot.Z, pframe1rot.W);
+            IndexedMatrix frame1 = IndexedMatrix.CreateFromQuaternion(frame1rot);
+            frame1._origin = frame1v;
+
+            IndexedVector3 frame2v = new IndexedVector3(pframe2.X, pframe2.Y, pframe2.Z);
+            IndexedQuaternion frame2rot = new IndexedQuaternion(pframe2rot.X, pframe2rot.Y, pframe2rot.Z, pframe2rot.W);
+            IndexedMatrix frame2 = IndexedMatrix.CreateFromQuaternion(frame2rot);
+            frame2._origin = frame1v;
+
+            constrain = new Generic6DofSpringConstraint(body1, body2, ref frame1, ref frame2, puseLinearReferenceFrameA);
+            world.AddConstraint(constrain, pdisableCollisionsBetweenLinkedBodies);
+
+            constrain.CalculateTransforms();
+        }
+
+        return new BulletConstraintXNA(constrain);
+    }
+
+    public override BulletConstraint CreateHingeConstraint(BulletWorld pWorld, BulletBody pBody1, BulletBody pBody2,
+                        Vector3 ppivotInA, Vector3 ppivotInB, Vector3 paxisInA, Vector3 paxisInB,
+                        bool puseLinearReferenceFrameA, bool pdisableCollisionsBetweenLinkedBodies)
+    {
+        HingeConstraint constrain = null;
+        DiscreteDynamicsWorld world = (pWorld as BulletWorldXNA).world;
+        RigidBody rb1 = (pBody1 as BulletBodyXNA).rigidBody;
+        RigidBody rb2 = (pBody2 as BulletBodyXNA).rigidBody;
+        if (rb1 != null && rb2 != null)
+        {
+            IndexedVector3 pivotInA = new IndexedVector3(ppivotInA.X, ppivotInA.Y, ppivotInA.Z);
+            IndexedVector3 pivotInB = new IndexedVector3(ppivotInB.X, ppivotInB.Y, ppivotInB.Z);
+            IndexedVector3 axisInA = new IndexedVector3(paxisInA.X, paxisInA.Y, paxisInA.Z);
+            IndexedVector3 axisInB = new IndexedVector3(paxisInB.X, paxisInB.Y, paxisInB.Z);
+            constrain = new HingeConstraint(rb1, rb2, ref pivotInA, ref pivotInB, ref axisInA, ref axisInB, puseLinearReferenceFrameA);
+            world.AddConstraint(constrain, pdisableCollisionsBetweenLinkedBodies);
+        }
+        return new BulletConstraintXNA(constrain);
+    }
+
+    public override BulletConstraint CreateSliderConstraint(BulletWorld pWorld, BulletBody pBody1, BulletBody pBody2,
+                        Vector3 pframe1, Quaternion pframe1rot,
+                        Vector3 pframe2, Quaternion pframe2rot,
+                        bool puseLinearReferenceFrameA, bool pdisableCollisionsBetweenLinkedBodies)
+    {
+        SliderConstraint constrain = null;
+        DiscreteDynamicsWorld world = (pWorld as BulletWorldXNA).world;
+        RigidBody rb1 = (pBody1 as BulletBodyXNA).rigidBody;
+        RigidBody rb2 = (pBody2 as BulletBodyXNA).rigidBody;
+        if (rb1 != null && rb2 != null)
+        {
+            IndexedVector3 frame1v = new IndexedVector3(pframe1.X, pframe1.Y, pframe1.Z);
+            IndexedQuaternion frame1rot = new IndexedQuaternion(pframe1rot.X, pframe1rot.Y, pframe1rot.Z, pframe1rot.W);
+            IndexedMatrix frame1 = IndexedMatrix.CreateFromQuaternion(frame1rot);
+            frame1._origin = frame1v;
+
+            IndexedVector3 frame2v = new IndexedVector3(pframe2.X, pframe2.Y, pframe2.Z);
+            IndexedQuaternion frame2rot = new IndexedQuaternion(pframe2rot.X, pframe2rot.Y, pframe2rot.Z, pframe2rot.W);
+            IndexedMatrix frame2 = IndexedMatrix.CreateFromQuaternion(frame2rot);
+            frame2._origin = frame1v;
+
+            constrain = new SliderConstraint(rb1, rb2, ref frame1, ref frame2, puseLinearReferenceFrameA);
+            world.AddConstraint(constrain, pdisableCollisionsBetweenLinkedBodies);
+        }
+        return new BulletConstraintXNA(constrain);
+    }
+
+    public override BulletConstraint CreateConeTwistConstraint(BulletWorld pWorld, BulletBody pBody1, BulletBody pBody2,
+                        Vector3 pframe1, Quaternion pframe1rot,
+                        Vector3 pframe2, Quaternion pframe2rot,
+                        bool pdisableCollisionsBetweenLinkedBodies)
+    {
+        ConeTwistConstraint constrain = null;
+        DiscreteDynamicsWorld world = (pWorld as BulletWorldXNA).world;
+        RigidBody rb1 = (pBody1 as BulletBodyXNA).rigidBody;
+        RigidBody rb2 = (pBody2 as BulletBodyXNA).rigidBody;
+        if (rb1 != null && rb2 != null)
+        {
+            IndexedVector3 frame1v = new IndexedVector3(pframe1.X, pframe1.Y, pframe1.Z);
+            IndexedQuaternion frame1rot = new IndexedQuaternion(pframe1rot.X, pframe1rot.Y, pframe1rot.Z, pframe1rot.W);
+            IndexedMatrix frame1 = IndexedMatrix.CreateFromQuaternion(frame1rot);
+            frame1._origin = frame1v;
+
+            IndexedVector3 frame2v = new IndexedVector3(pframe2.X, pframe2.Y, pframe2.Z);
+            IndexedQuaternion frame2rot = new IndexedQuaternion(pframe2rot.X, pframe2rot.Y, pframe2rot.Z, pframe2rot.W);
+            IndexedMatrix frame2 = IndexedMatrix.CreateFromQuaternion(frame2rot);
+            frame2._origin = frame1v;
+
+            constrain = new ConeTwistConstraint(rb1, rb2, ref frame1, ref frame2);
+            world.AddConstraint(constrain, pdisableCollisionsBetweenLinkedBodies);
+        }
+        return new BulletConstraintXNA(constrain);
+    }
+
+    public override BulletConstraint CreateGearConstraint(BulletWorld pWorld, BulletBody pBody1, BulletBody pBody2,
+                        Vector3 paxisInA, Vector3 paxisInB,
+                        float pratio, bool pdisableCollisionsBetweenLinkedBodies)
+    {
+        Generic6DofConstraint constrain = null;
+        /*   BulletXNA does not have a gear constraint
+        GearConstraint constrain = null;
+        DiscreteDynamicsWorld world = (pWorld as BulletWorldXNA).world;
+        RigidBody rb1 = (pBody1 as BulletBodyXNA).rigidBody;
+        RigidBody rb2 = (pBody2 as BulletBodyXNA).rigidBody;
+        if (rb1 != null && rb2 != null)
+        {
+            IndexedVector3 axis1 = new IndexedVector3(paxisInA.X, paxisInA.Y, paxisInA.Z);
+            IndexedVector3 axis2 = new IndexedVector3(paxisInB.X, paxisInB.Y, paxisInB.Z);
+            constrain = new GearConstraint(rb1, rb2, ref axis1, ref axis2, pratio);
+            world.AddConstraint(constrain, pdisableCollisionsBetweenLinkedBodies);
+        }
+        */
+        return new BulletConstraintXNA(constrain);
+    }
+
+    public override BulletConstraint CreatePoint2PointConstraint(BulletWorld pWorld, BulletBody pBody1, BulletBody pBody2,
+                        Vector3 ppivotInA, Vector3 ppivotInB,
+                        bool pdisableCollisionsBetweenLinkedBodies)
+    {
+        Point2PointConstraint constrain = null;
+        DiscreteDynamicsWorld world = (pWorld as BulletWorldXNA).world;
+        RigidBody rb1 = (pBody1 as BulletBodyXNA).rigidBody;
+        RigidBody rb2 = (pBody2 as BulletBodyXNA).rigidBody;
+        if (rb1 != null && rb2 != null)
+        {
+            IndexedVector3 pivotInA = new IndexedVector3(ppivotInA.X, ppivotInA.Y, ppivotInA.Z);
+            IndexedVector3 pivotInB = new IndexedVector3(ppivotInB.X, ppivotInB.Y, ppivotInB.Z);
+            constrain = new Point2PointConstraint(rb1, rb2, ref pivotInA, ref pivotInB);
+            world.AddConstraint(constrain, pdisableCollisionsBetweenLinkedBodies);
+        }
+        return new BulletConstraintXNA(constrain);
+    }
+
+    public override BulletShape CreateHullShape(BulletWorld pWorld, int pHullCount, float[] pConvHulls)
+    {
+        DiscreteDynamicsWorld world = (pWorld as BulletWorldXNA).world;
+        CompoundShape compoundshape = new CompoundShape(false);
+
+        compoundshape.SetMargin(world.WorldSettings.Params.collisionMargin);
+        int ii = 1;
+
+        for (int i = 0; i < pHullCount; i++)
+        {
+            int vertexCount = (int) pConvHulls[ii];
+
+            IndexedVector3 centroid = new IndexedVector3(pConvHulls[ii + 1], pConvHulls[ii + 2], pConvHulls[ii + 3]);
+            IndexedMatrix childTrans = IndexedMatrix.Identity;
+            childTrans._origin = centroid;
+
+            List<IndexedVector3> virts = new List<IndexedVector3>();
+            int ender = ((ii + 4) + (vertexCount*3));
+            for (int iii = ii + 4; iii < ender; iii+=3)
+            {
+
+                virts.Add(new IndexedVector3(pConvHulls[iii], pConvHulls[iii + 1], pConvHulls[iii +2]));
+            }
+            ConvexHullShape convexShape = new ConvexHullShape(virts, vertexCount);
+            convexShape.SetMargin(world.WorldSettings.Params.collisionMargin);
+            compoundshape.AddChildShape(ref childTrans, convexShape);
+            ii += (vertexCount*3 + 4);
+        }
+
+        return new BulletShapeXNA(compoundshape, BSPhysicsShapeType.SHAPE_HULL);
+    }
+
+    public override BulletShape BuildHullShapeFromMesh(BulletWorld world, BulletShape meshShape, HACDParams parms)
+    {
+        /* TODO */ return null;
+    }
+
+    public override BulletShape BuildConvexHullShapeFromMesh(BulletWorld world, BulletShape meshShape)
+    {
+        /* TODO */ return null;
+    }
+
+    public override BulletShape CreateConvexHullShape(BulletWorld pWorld, int pIndicesCount, int[] indices, int pVerticesCount, float[] verticesAsFloats)
+    {
+        /* TODO */ return null;
+    }
+
+    public override BulletShape CreateMeshShape(BulletWorld pWorld, int pIndicesCount, int[] indices, int pVerticesCount, float[] verticesAsFloats)
+    {
+        //DumpRaw(indices,verticesAsFloats,pIndicesCount,pVerticesCount);
+
+        for (int iter = 0; iter < pVerticesCount; iter++)
+        {
+            if (verticesAsFloats[iter] > 0 && verticesAsFloats[iter] < 0.0001) verticesAsFloats[iter] = 0;
+            if (verticesAsFloats[iter] < 0 && verticesAsFloats[iter] > -0.0001) verticesAsFloats[iter] = 0;
+        }
+
+        ObjectArray<int> indicesarr = new ObjectArray<int>(indices);
+        ObjectArray<float> vertices = new ObjectArray<float>(verticesAsFloats);
+        DumpRaw(indicesarr,vertices,pIndicesCount,pVerticesCount);
+        DiscreteDynamicsWorld world = (pWorld as BulletWorldXNA).world;
+        IndexedMesh mesh = new IndexedMesh();
+        mesh.m_indexType = PHY_ScalarType.PHY_INTEGER;
+        mesh.m_numTriangles = pIndicesCount/3;
+        mesh.m_numVertices = pVerticesCount;
+        mesh.m_triangleIndexBase = indicesarr;
+        mesh.m_vertexBase = vertices;
+        mesh.m_vertexStride = 3;
+        mesh.m_vertexType = PHY_ScalarType.PHY_FLOAT;
+        mesh.m_triangleIndexStride = 3;
+
+        TriangleIndexVertexArray tribuilder = new TriangleIndexVertexArray();
+        tribuilder.AddIndexedMesh(mesh, PHY_ScalarType.PHY_INTEGER);
+        BvhTriangleMeshShape meshShape = new BvhTriangleMeshShape(tribuilder, true,true);
+        meshShape.SetMargin(world.WorldSettings.Params.collisionMargin);
+       // world.UpdateSingleAabb(meshShape);
+        return new BulletShapeXNA(meshShape, BSPhysicsShapeType.SHAPE_MESH);
+
+    }
+    public override BulletShape CreateGImpactShape(BulletWorld pWorld, int pIndicesCount, int[] indices, int pVerticesCount, float[] verticesAsFloats)
+    {
+        // TODO:
+        return null;
+    }
+    public static void DumpRaw(ObjectArray<int>indices, ObjectArray<float> vertices, int pIndicesCount,int pVerticesCount )
+    {
+
+        String fileName = "objTest3.raw";
+        String completePath = System.IO.Path.Combine(Util.configDir(), fileName);
+        StreamWriter sw = new StreamWriter(completePath);
+        IndexedMesh mesh = new IndexedMesh();
+
+        mesh.m_indexType = PHY_ScalarType.PHY_INTEGER;
+        mesh.m_numTriangles = pIndicesCount / 3;
+        mesh.m_numVertices = pVerticesCount;
+        mesh.m_triangleIndexBase = indices;
+        mesh.m_vertexBase = vertices;
+        mesh.m_vertexStride = 3;
+        mesh.m_vertexType = PHY_ScalarType.PHY_FLOAT;
+        mesh.m_triangleIndexStride = 3;
+
+        TriangleIndexVertexArray tribuilder = new TriangleIndexVertexArray();
+        tribuilder.AddIndexedMesh(mesh, PHY_ScalarType.PHY_INTEGER);
+
+
+
+        for (int i = 0; i < pVerticesCount; i++)
+        {
+
+            string s = vertices[indices[i * 3]].ToString("0.0000");
+            s += " " + vertices[indices[i * 3 + 1]].ToString("0.0000");
+            s += " " + vertices[indices[i * 3 + 2]].ToString("0.0000");
+
+            sw.Write(s + "\n");
+        }
+
+        sw.Close();
+    }
+    public static void DumpRaw(int[] indices, float[] vertices, int pIndicesCount, int pVerticesCount)
+    {
+
+        String fileName = "objTest6.raw";
+        String completePath = System.IO.Path.Combine(Util.configDir(), fileName);
+        StreamWriter sw = new StreamWriter(completePath);
+        IndexedMesh mesh = new IndexedMesh();
+
+        mesh.m_indexType = PHY_ScalarType.PHY_INTEGER;
+        mesh.m_numTriangles = pIndicesCount / 3;
+        mesh.m_numVertices = pVerticesCount;
+        mesh.m_triangleIndexBase = indices;
+        mesh.m_vertexBase = vertices;
+        mesh.m_vertexStride = 3;
+        mesh.m_vertexType = PHY_ScalarType.PHY_FLOAT;
+        mesh.m_triangleIndexStride = 3;
+
+        TriangleIndexVertexArray tribuilder = new TriangleIndexVertexArray();
+        tribuilder.AddIndexedMesh(mesh, PHY_ScalarType.PHY_INTEGER);
+
+
+        sw.WriteLine("Indices");
+        sw.WriteLine(string.Format("int[] indices = new int[{0}];",pIndicesCount));
+        for (int iter = 0; iter < indices.Length; iter++)
+        {
+            sw.WriteLine(string.Format("indices[{0}]={1};",iter,indices[iter]));
+        }
+        sw.WriteLine("VerticesFloats");
+        sw.WriteLine(string.Format("float[] vertices = new float[{0}];", pVerticesCount));
+        for (int iter = 0; iter < vertices.Length; iter++)
+        {
+            sw.WriteLine(string.Format("Vertices[{0}]={1};", iter, vertices[iter].ToString("0.0000")));
+        }
+
+            // for (int i = 0; i < pVerticesCount; i++)
+            // {
+            //
+            //     string s = vertices[indices[i * 3]].ToString("0.0000");
+            //     s += " " + vertices[indices[i * 3 + 1]].ToString("0.0000");
+            //    s += " " + vertices[indices[i * 3 + 2]].ToString("0.0000");
+            //
+            //     sw.Write(s + "\n");
+            //}
+
+            sw.Close();
+    }
+
+    public override BulletShape CreateTerrainShape(uint id, Vector3 size, float minHeight, float maxHeight, float[] heightMap,
+                                                                float scaleFactor, float collisionMargin)
+    {
+        const int upAxis = 2;
+        HeightfieldTerrainShape terrainShape = new HeightfieldTerrainShape((int)size.X, (int)size.Y,
+                                                                           heightMap,  scaleFactor,
+                                                                           minHeight, maxHeight, upAxis,
+                                                                            false);
+        terrainShape.SetMargin(collisionMargin);
+        terrainShape.SetUseDiamondSubdivision(true);
+        terrainShape.SetUserPointer(id);
+        return new BulletShapeXNA(terrainShape, BSPhysicsShapeType.SHAPE_TERRAIN);
+    }
+
+    public override bool TranslationalLimitMotor(BulletConstraint pConstraint, float ponOff, float targetVelocity, float maxMotorForce)
+    {
+        TypedConstraint tconstrain = (pConstraint as BulletConstraintXNA).constrain;
+        bool onOff = ponOff != 0;
+        bool ret = false;
+
+        switch (tconstrain.GetConstraintType())
+        {
+            case TypedConstraintType.D6_CONSTRAINT_TYPE:
+                Generic6DofConstraint constrain = tconstrain as Generic6DofConstraint;
+                constrain.GetTranslationalLimitMotor().m_enableMotor[0] = onOff;
+                constrain.GetTranslationalLimitMotor().m_targetVelocity[0] = targetVelocity;
+                constrain.GetTranslationalLimitMotor().m_maxMotorForce[0] = maxMotorForce;
+                ret = true;
+                break;
+        }
+
+
+        return ret;
+
+    }
+
+    public override int PhysicsStep(BulletWorld world, float timeStep, int maxSubSteps, float fixedTimeStep,
+                        out int updatedEntityCount, out int collidersCount)
+    {
+        /* TODO */
+        updatedEntityCount = 0;
+        collidersCount = 0;
+
+
+        int ret = PhysicsStep2(world,timeStep,maxSubSteps,fixedTimeStep,out updatedEntityCount,out world.physicsScene.m_updateArray, out collidersCount, out world.physicsScene.m_collisionArray);
+
+        return ret;
+    }
+
+    private int PhysicsStep2(BulletWorld pWorld, float timeStep, int m_maxSubSteps, float m_fixedTimeStep,
+                    out int updatedEntityCount, out EntityProperties[] updatedEntities,
+                    out int collidersCount, out CollisionDesc[] colliders)
+    {
+        int epic = PhysicsStepint(pWorld, timeStep, m_maxSubSteps, m_fixedTimeStep, out updatedEntityCount, out updatedEntities,
+                                out collidersCount, out colliders, m_maxCollisions, m_maxUpdatesPerFrame);
+        return epic;
+    }
+
+    private int PhysicsStepint(BulletWorld pWorld,float timeStep, int m_maxSubSteps, float m_fixedTimeStep, out int updatedEntityCount,
+        out  EntityProperties[] updatedEntities, out int collidersCount, out CollisionDesc[] colliders, int maxCollisions, int maxUpdates)
+    {
+        int numSimSteps = 0;
+        Array.Clear(UpdatedObjects, 0, UpdatedObjects.Length);
+        Array.Clear(UpdatedCollisions, 0, UpdatedCollisions.Length);
+        LastEntityProperty=0;
+
+
+
+
+
+
+        LastCollisionDesc=0;
+
+        updatedEntityCount = 0;
+        collidersCount = 0;
+
+
+        if (pWorld is BulletWorldXNA)
+        {
+            DiscreteDynamicsWorld world = (pWorld as BulletWorldXNA).world;
+
+            world.LastCollisionDesc = 0;
+            world.LastEntityProperty = 0;
+            numSimSteps = world.StepSimulation(timeStep, m_maxSubSteps, m_fixedTimeStep);
+
+            PersistentManifold contactManifold;
+            CollisionObject objA;
+            CollisionObject objB;
+            ManifoldPoint manifoldPoint;
+            PairCachingGhostObject pairCachingGhostObject;
+
+            m_collisionsThisFrame = 0;
+            int numManifolds = world.GetDispatcher().GetNumManifolds();
+            for (int j = 0; j < numManifolds; j++)
+            {
+                contactManifold = world.GetDispatcher().GetManifoldByIndexInternal(j);
+                int numContacts = contactManifold.GetNumContacts();
+                if (numContacts == 0)
+                    continue;
+
+                objA = contactManifold.GetBody0() as CollisionObject;
+                objB = contactManifold.GetBody1() as CollisionObject;
+
+                manifoldPoint = contactManifold.GetContactPoint(0);
+                //IndexedVector3 contactPoint = manifoldPoint.GetPositionWorldOnB();
+               // IndexedVector3 contactNormal = -manifoldPoint.m_normalWorldOnB; // make relative to A
+
+                RecordCollision(this, objA, objB, manifoldPoint.GetPositionWorldOnB(), -manifoldPoint.m_normalWorldOnB, manifoldPoint.GetDistance());
+                m_collisionsThisFrame ++;
+                if (m_collisionsThisFrame >= 9999999)
+                    break;
+
+
+            }
+
+            foreach (GhostObject ghostObject in specialCollisionObjects.Values)
+            {
+                pairCachingGhostObject = ghostObject as PairCachingGhostObject;
+                if (pairCachingGhostObject != null)
+                {
+                    RecordGhostCollisions(pairCachingGhostObject);
+                }
+
+            }
+
+
+            updatedEntityCount = LastEntityProperty;
+            updatedEntities = UpdatedObjects;
+
+            collidersCount = LastCollisionDesc;
+            colliders = UpdatedCollisions;
+
+
+        }
+        else
+        {
+            //if (updatedEntities is null)
+            //updatedEntities = new List<BulletXNA.EntityProperties>();
+            //updatedEntityCount = 0;
+
+
+            //collidersCount = 0;
+
+            updatedEntities = new EntityProperties[0];
+
+
+            colliders = new CollisionDesc[0];
+
+        }
+        return numSimSteps;
+    }
+    public void RecordGhostCollisions(PairCachingGhostObject obj)
+    {
+        IOverlappingPairCache cache = obj.GetOverlappingPairCache();
+        ObjectArray<BroadphasePair> pairs = cache.GetOverlappingPairArray();
+
+        DiscreteDynamicsWorld world = (PhysicsScene.World as BulletWorldXNA).world;
+        PersistentManifoldArray manifoldArray = new PersistentManifoldArray();
+        BroadphasePair collisionPair;
+        PersistentManifold contactManifold;
+
+        CollisionObject objA;
+        CollisionObject objB;
+
+        ManifoldPoint pt;
+
+        int numPairs = pairs.Count;
+
+        for (int i = 0; i < numPairs; i++)
+        {
+            manifoldArray.Clear();
+            if (LastCollisionDesc < UpdatedCollisions.Length)
+                break;
+            collisionPair = world.GetPairCache().FindPair(pairs[i].m_pProxy0, pairs[i].m_pProxy1);
+            if (collisionPair == null)
+                continue;
+
+            collisionPair.m_algorithm.GetAllContactManifolds(manifoldArray);
+            for (int j = 0; j < manifoldArray.Count; j++)
+            {
+                contactManifold = manifoldArray[j];
+                int numContacts = contactManifold.GetNumContacts();
+                objA = contactManifold.GetBody0() as CollisionObject;
+                objB = contactManifold.GetBody1() as CollisionObject;
+                for (int p = 0; p < numContacts; p++)
+                {
+                    pt = contactManifold.GetContactPoint(p);
+                    if (pt.GetDistance() < 0.0f)
+                    {
+                        RecordCollision(this, objA, objB, pt.GetPositionWorldOnA(), -pt.m_normalWorldOnB,pt.GetDistance());
+                        break;
+                    }
+                }
+            }
+        }
+
+    }
+    private static void RecordCollision(BSAPIXNA world, CollisionObject objA, CollisionObject objB, IndexedVector3 contact, IndexedVector3 norm, float penetration)
+    {
+
+        IndexedVector3 contactNormal = norm;
+        if ((objA.GetCollisionFlags() & BulletXNA.BulletCollision.CollisionFlags.BS_WANTS_COLLISIONS) == 0 &&
+            (objB.GetCollisionFlags() & BulletXNA.BulletCollision.CollisionFlags.BS_WANTS_COLLISIONS) == 0)
+        {
+            return;
+        }
+        uint idA = (uint)objA.GetUserPointer();
+        uint idB = (uint)objB.GetUserPointer();
+        if (idA > idB)
+        {
+            uint temp = idA;
+            idA = idB;
+            idB = temp;
+            contactNormal = -contactNormal;
+        }
+
+        //ulong collisionID = ((ulong) idA << 32) | idB;
+
+        CollisionDesc cDesc = new CollisionDesc()
+                                            {
+                                                aID = idA,
+                                                bID = idB,
+                                                point = new Vector3(contact.X,contact.Y,contact.Z),
+                                                normal = new Vector3(contactNormal.X,contactNormal.Y,contactNormal.Z),
+                                                penetration = penetration
+
+                                            };
+        if (world.LastCollisionDesc < world.UpdatedCollisions.Length)
+            world.UpdatedCollisions[world.LastCollisionDesc++] = (cDesc);
+        m_collisionsThisFrame++;
+
+
+    }
+    private static EntityProperties GetDebugProperties(BulletWorld pWorld, BulletBody pCollisionObject)
+    {
+        EntityProperties ent = new EntityProperties();
+        DiscreteDynamicsWorld world = (pWorld as BulletWorldXNA).world;
+        CollisionObject collisionObject = (pCollisionObject as BulletBodyXNA).rigidBody;
+        IndexedMatrix transform = collisionObject.GetWorldTransform();
+        IndexedVector3 LinearVelocity = collisionObject.GetInterpolationLinearVelocity();
+        IndexedVector3 AngularVelocity = collisionObject.GetInterpolationAngularVelocity();
+        IndexedQuaternion rotation = transform.GetRotation();
+        ent.Acceleration = Vector3.Zero;
+        ent.ID = (uint)collisionObject.GetUserPointer();
+        ent.Position = new Vector3(transform._origin.X,transform._origin.Y,transform._origin.Z);
+        ent.Rotation = new Quaternion(rotation.X,rotation.Y,rotation.Z,rotation.W);
+        ent.Velocity = new Vector3(LinearVelocity.X, LinearVelocity.Y, LinearVelocity.Z);
+        ent.RotationalVelocity = new Vector3(AngularVelocity.X, AngularVelocity.Y, AngularVelocity.Z);
+        return ent;
+    }
+
+    public override bool UpdateParameter(BulletWorld world, uint localID, String parm, float value) { /* TODO */
+        return false; }
+
+    public override Vector3 GetLocalScaling(BulletShape pShape)
+    {
+        CollisionShape shape = (pShape as BulletShapeXNA).shape;
+        IndexedVector3 scale = shape.GetLocalScaling();
+        return new Vector3(scale.X,scale.Y,scale.Z);
+    }
+
+    public bool RayCastGround(BulletWorld pWorld, Vector3 _RayOrigin, float pRayHeight, BulletBody NotMe)
+    {
+        DiscreteDynamicsWorld world = (pWorld as BulletWorldXNA).world;
+        if (world != null)
+        {
+            if (NotMe is BulletBodyXNA && NotMe.HasPhysicalBody)
+            {
+                CollisionObject AvoidBody = (NotMe as BulletBodyXNA).body;
+
+                IndexedVector3 rOrigin = new IndexedVector3(_RayOrigin.X, _RayOrigin.Y, _RayOrigin.Z);
+                IndexedVector3 rEnd = new IndexedVector3(_RayOrigin.X, _RayOrigin.Y, _RayOrigin.Z - pRayHeight);
+                using (
+                    ClosestNotMeRayResultCallback rayCallback =
+                                            new ClosestNotMeRayResultCallback(rOrigin, rEnd, AvoidBody)
+                    )
+                {
+                    world.RayTest(ref rOrigin, ref rEnd, rayCallback);
+                    if (rayCallback.HasHit())
+                    {
+                        IndexedVector3 hitLocation = rayCallback.m_hitPointWorld;
+                    }
+                    return rayCallback.HasHit();
+                }
+           }
+        }
+        return false;
+    }
+}
+
+
+
+
+    public class SimMotionState : DefaultMotionState
+    {
+        public RigidBody Rigidbody;
+        public Vector3 ZeroVect;
+
+        private IndexedMatrix m_xform;
+
+        private EntityProperties m_properties;
+        private EntityProperties m_lastProperties;
+        private BSAPIXNA m_world;
+
+        const float POSITION_TOLERANCE = 0.05f;
+        const float VELOCITY_TOLERANCE = 0.001f;
+        const float ROTATION_TOLERANCE = 0.01f;
+        const float ANGULARVELOCITY_TOLERANCE = 0.01f;
+
+        public SimMotionState(BSAPIXNA pWorld, uint id, IndexedMatrix starTransform, object frameUpdates)
+        {
+            IndexedQuaternion OrientationQuaterion = starTransform.GetRotation();
+            m_properties = new EntityProperties()
+                               {
+                                   ID = id,
+                                   Position = new Vector3(starTransform._origin.X, starTransform._origin.Y,starTransform._origin.Z),
+                                   Rotation = new Quaternion(OrientationQuaterion.X,OrientationQuaterion.Y,OrientationQuaterion.Z,OrientationQuaterion.W)
+                               };
+            m_lastProperties = new EntityProperties()
+            {
+                ID = id,
+                Position = new Vector3(starTransform._origin.X, starTransform._origin.Y, starTransform._origin.Z),
+                Rotation = new Quaternion(OrientationQuaterion.X, OrientationQuaterion.Y, OrientationQuaterion.Z, OrientationQuaterion.W)
+            };
+            m_world = pWorld;
+            m_xform = starTransform;
+        }
+
+        public override void GetWorldTransform(out IndexedMatrix worldTrans)
+        {
+            worldTrans = m_xform;
+        }
+
+        public override void SetWorldTransform(IndexedMatrix worldTrans)
+        {
+            SetWorldTransform(ref worldTrans);
+        }
+
+        public override void SetWorldTransform(ref IndexedMatrix worldTrans)
+        {
+            SetWorldTransform(ref worldTrans, false);
+        }
+        public void SetWorldTransform(ref IndexedMatrix worldTrans, bool force)
+        {
+            m_xform = worldTrans;
+            // Put the new transform into m_properties
+            IndexedQuaternion OrientationQuaternion = m_xform.GetRotation();
+            IndexedVector3 LinearVelocityVector = Rigidbody.GetLinearVelocity();
+            IndexedVector3 AngularVelocityVector = Rigidbody.GetAngularVelocity();
+            m_properties.Position = new Vector3(m_xform._origin.X, m_xform._origin.Y, m_xform._origin.Z);
+            m_properties.Rotation = new Quaternion(OrientationQuaternion.X, OrientationQuaternion.Y,
+                                                   OrientationQuaternion.Z, OrientationQuaternion.W);
+            // A problem with stock Bullet is that we don't get an event when an object is deactivated.
+            // This means that the last non-zero values for linear and angular velocity
+            // are left in the viewer who does dead reconning and the objects look like
+            // they float off.
+            // BulletSim ships with a patch to Bullet which creates such an event.
+            m_properties.Velocity = new Vector3(LinearVelocityVector.X, LinearVelocityVector.Y, LinearVelocityVector.Z);
+            m_properties.RotationalVelocity = new Vector3(AngularVelocityVector.X, AngularVelocityVector.Y, AngularVelocityVector.Z);
+
+            if (force
+
+                || !AlmostEqual(ref m_lastProperties.Position, ref m_properties.Position, POSITION_TOLERANCE)
+                || !AlmostEqual(ref m_properties.Rotation, ref m_lastProperties.Rotation, ROTATION_TOLERANCE)
+                // If the Velocity and AngularVelocity are zero, most likely the object has
+                //    been deactivated. If they both are zero and they have become zero recently,
+                //    make sure a property update is sent so the zeros make it to the viewer.
+                || ((m_properties.Velocity == ZeroVect && m_properties.RotationalVelocity == ZeroVect)
+                    &&
+                    (m_properties.Velocity != m_lastProperties.Velocity ||
+                     m_properties.RotationalVelocity != m_lastProperties.RotationalVelocity))
+                //      If Velocity and AngularVelocity are non-zero but have changed, send an update.
+                || !AlmostEqual(ref m_properties.Velocity, ref m_lastProperties.Velocity, VELOCITY_TOLERANCE)
+                ||
+                !AlmostEqual(ref m_properties.RotationalVelocity, ref m_lastProperties.RotationalVelocity,
+                             ANGULARVELOCITY_TOLERANCE)
+                )
+
+
+            {
+                // Add this update to the list of updates for this frame.
+                m_lastProperties = m_properties;
+                if (m_world.LastEntityProperty < m_world.UpdatedObjects.Length)
+                    m_world.UpdatedObjects[m_world.LastEntityProperty++]=(m_properties);
+
+                //(*m_updatesThisFrame)[m_properties.ID] = &m_properties;
+            }
+
+
+
+
+        }
+        public override void SetRigidBody(RigidBody body)
+        {
+            Rigidbody = body;
+        }
+        internal static bool AlmostEqual(ref Vector3 v1, ref Vector3 v2, float nEpsilon)
+        {
+            return
+            (((v1.X - nEpsilon) < v2.X) && (v2.X < (v1.X + nEpsilon))) &&
+            (((v1.Y - nEpsilon) < v2.Y) && (v2.Y < (v1.Y + nEpsilon))) &&
+            (((v1.Z - nEpsilon) < v2.Z) && (v2.Z < (v1.Z + nEpsilon)));
+        }
+
+        internal static bool AlmostEqual(ref Quaternion v1, ref Quaternion v2, float nEpsilon)
+        {
+            return
+            (((v1.X - nEpsilon) < v2.X) && (v2.X < (v1.X + nEpsilon))) &&
+            (((v1.Y - nEpsilon) < v2.Y) && (v2.Y < (v1.Y + nEpsilon))) &&
+            (((v1.Z - nEpsilon) < v2.Z) && (v2.Z < (v1.Z + nEpsilon))) &&
+            (((v1.W - nEpsilon) < v2.W) && (v2.W < (v1.W + nEpsilon)));
+        }
+
+    }
+}
+
diff --git a/OpenSim/Region/PhysicsModules/BulletS/BSActorAvatarMove.cs b/OpenSim/Region/PhysicsModules/BulletS/BSActorAvatarMove.cs
new file mode 100755
index 0000000..0191893
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/BSActorAvatarMove.cs
@@ -0,0 +1,457 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyrightD
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Text;
+
+using OpenSim.Framework;
+using OpenSim.Region.PhysicsModules.SharedBase;
+
+using OMV = OpenMetaverse;
+
+namespace OpenSim.Region.PhysicsModule.BulletS
+{
+public class BSActorAvatarMove : BSActor
+{
+    BSVMotor m_velocityMotor;
+
+    // Set to true if we think we're going up stairs.
+    //    This state is remembered because collisions will turn on and off as we go up stairs.
+    int m_walkingUpStairs;
+    // The amount the step up is applying. Used to smooth stair walking.
+    float m_lastStepUp;
+
+    // Jumping happens over several frames. If use applies up force while colliding, start the
+    //    jump and allow the jump to continue for this number of frames.
+    int m_jumpFrames = 0;
+    float m_jumpVelocity = 0f;
+
+    public BSActorAvatarMove(BSScene physicsScene, BSPhysObject pObj, string actorName)
+        : base(physicsScene, pObj, actorName)
+    {
+        m_velocityMotor = null;
+        m_walkingUpStairs = 0;
+        m_physicsScene.DetailLog("{0},BSActorAvatarMove,constructor", m_controllingPrim.LocalID);
+    }
+
+    // BSActor.isActive
+    public override bool isActive
+    {
+        get { return Enabled && m_controllingPrim.IsPhysicallyActive; }
+    }
+
+    // Release any connections and resources used by the actor.
+    // BSActor.Dispose()
+    public override void Dispose()
+    {
+        base.SetEnabled(false);
+        DeactivateAvatarMove();
+    }
+
+    // Called when physical parameters (properties set in Bullet) need to be re-applied.
+    // Called at taint-time.
+    // BSActor.Refresh()
+    public override void Refresh()
+    {
+        m_physicsScene.DetailLog("{0},BSActorAvatarMove,refresh", m_controllingPrim.LocalID);
+
+        // If the object is physically active, add the hoverer prestep action
+        if (isActive)
+        {
+            ActivateAvatarMove();
+        }
+        else
+        {
+            DeactivateAvatarMove();
+        }
+    }
+
+    // The object's physical representation is being rebuilt so pick up any physical dependencies (constraints, ...).
+    //     Register a prestep action to restore physical requirements before the next simulation step.
+    // Called at taint-time.
+    // BSActor.RemoveDependencies()
+    public override void RemoveDependencies()
+    {
+        // Nothing to do for the hoverer since it is all software at pre-step action time.
+    }
+
+    // Usually called when target velocity changes to set the current velocity and the target
+    //     into the movement motor.
+    public void SetVelocityAndTarget(OMV.Vector3 vel, OMV.Vector3 targ, bool inTaintTime)
+    {
+        m_physicsScene.TaintedObject(inTaintTime, m_controllingPrim.LocalID, "BSActorAvatarMove.setVelocityAndTarget", delegate()
+        {
+            if (m_velocityMotor != null)
+            {
+//                    if (targ == OMV.Vector3.Zero)
+//                        Util.PrintCallStack();
+//
+//                    Console.WriteLine("SetVelocityAndTarget, {0} {1}", vel, targ);
+                m_velocityMotor.Reset();
+                m_velocityMotor.SetTarget(targ);
+                m_velocityMotor.SetCurrent(vel);
+                m_velocityMotor.Enabled = true;
+            }
+        });
+    }
+
+    // If a hover motor has not been created, create one and start the hovering.
+    private void ActivateAvatarMove()
+    {
+        if (m_velocityMotor == null)
+        {
+            // Infinite decay and timescale values so motor only changes current to target values.
+            m_velocityMotor = new BSVMotor("BSCharacter.Velocity",
+                                                0.2f,                       // time scale
+                                                BSMotor.Infinite,           // decay time scale
+                                                1f                          // efficiency
+            );
+            m_velocityMotor.ErrorZeroThreshold = BSParam.AvatarStopZeroThreshold;
+            // _velocityMotor.PhysicsScene = PhysicsScene; // DEBUG DEBUG so motor will output detail log messages.
+            SetVelocityAndTarget(m_controllingPrim.RawVelocity, m_controllingPrim.TargetVelocity, true /* inTaintTime */);
+
+            m_physicsScene.BeforeStep += Mover;
+            m_controllingPrim.OnPreUpdateProperty += Process_OnPreUpdateProperty;
+
+            m_walkingUpStairs = 0;
+        }
+    }
+
+    private void DeactivateAvatarMove()
+    {
+        if (m_velocityMotor != null)
+        {
+            m_controllingPrim.OnPreUpdateProperty -= Process_OnPreUpdateProperty;
+            m_physicsScene.BeforeStep -= Mover;
+            m_velocityMotor = null;
+        }
+    }
+
+    // Called just before the simulation step. Update the vertical position for hoverness.
+    private void Mover(float timeStep)
+    {
+        // Don't do movement while the object is selected.
+        if (!isActive)
+            return;
+
+        // TODO: Decide if the step parameters should be changed depending on the avatar's
+        //     state (flying, colliding, ...). There is code in ODE to do this.
+
+        // COMMENTARY: when the user is making the avatar walk, except for falling, the velocity
+        //   specified for the avatar is the one that should be used. For falling, if the avatar
+        //   is not flying and is not colliding then it is presumed to be falling and the Z
+        //   component is not fooled with (thus allowing gravity to do its thing).
+        // When the avatar is standing, though, the user has specified a velocity of zero and
+        //   the avatar should be standing. But if the avatar is pushed by something in the world
+        //   (raising elevator platform, moving vehicle, ...) the avatar should be allowed to
+        //   move. Thus, the velocity cannot be forced to zero. The problem is that small velocity
+        //   errors can creap in and the avatar will slowly float off in some direction.
+        // So, the problem is that, when an avatar is standing, we cannot tell creaping error
+        //   from real pushing.
+        // The code below uses whether the collider is static or moving to decide whether to zero motion.
+
+        m_velocityMotor.Step(timeStep);
+        m_controllingPrim.IsStationary = false;
+
+        // If we're not supposed to be moving, make sure things are zero.
+        if (m_velocityMotor.ErrorIsZero() && m_velocityMotor.TargetValue == OMV.Vector3.Zero)
+        {
+            // The avatar shouldn't be moving
+            m_velocityMotor.Zero();
+
+            if (m_controllingPrim.IsColliding)
+            {
+                // If we are colliding with a stationary object, presume we're standing and don't move around
+                if (!m_controllingPrim.ColliderIsMoving && !m_controllingPrim.ColliderIsVolumeDetect)
+                {
+                    m_physicsScene.DetailLog("{0},BSCharacter.MoveMotor,collidingWithStationary,zeroingMotion", m_controllingPrim.LocalID);
+                    m_controllingPrim.IsStationary = true;
+                    m_controllingPrim.ZeroMotion(true /* inTaintTime */);
+                }
+
+                // Standing has more friction on the ground
+                if (m_controllingPrim.Friction != BSParam.AvatarStandingFriction)
+                {
+                    m_controllingPrim.Friction = BSParam.AvatarStandingFriction;
+                    m_physicsScene.PE.SetFriction(m_controllingPrim.PhysBody, m_controllingPrim.Friction);
+                }
+            }
+            else
+            {
+                if (m_controllingPrim.Flying)
+                {
+                    // Flying and not colliding and velocity nearly zero.
+                    m_controllingPrim.ZeroMotion(true /* inTaintTime */);
+                }
+                else
+                {
+                    //We are falling but are not touching any keys make sure not falling too fast
+                    if (m_controllingPrim.RawVelocity.Z < BSParam.AvatarTerminalVelocity)
+                    {
+
+                        OMV.Vector3 slowingForce = new OMV.Vector3(0f, 0f, BSParam.AvatarTerminalVelocity - m_controllingPrim.RawVelocity.Z) * m_controllingPrim.Mass;
+                        m_physicsScene.PE.ApplyCentralImpulse(m_controllingPrim.PhysBody, slowingForce);
+                    }
+
+                }
+            }
+
+            m_physicsScene.DetailLog("{0},BSCharacter.MoveMotor,taint,stopping,target={1},colliding={2}",
+                            m_controllingPrim.LocalID, m_velocityMotor.TargetValue, m_controllingPrim.IsColliding);
+        }
+        else
+        {
+            // Supposed to be moving.
+            OMV.Vector3 stepVelocity = m_velocityMotor.CurrentValue;
+
+            if (m_controllingPrim.Friction != BSParam.AvatarFriction)
+            {
+                // Probably starting to walk. Set friction to moving friction.
+                m_controllingPrim.Friction = BSParam.AvatarFriction;
+                m_physicsScene.PE.SetFriction(m_controllingPrim.PhysBody, m_controllingPrim.Friction);
+            }
+
+            if (!m_controllingPrim.Flying && !m_controllingPrim.IsColliding)
+            {
+                stepVelocity.Z = m_controllingPrim.RawVelocity.Z;
+            }
+
+            // Colliding and not flying with an upward force. The avatar must be trying to jump.
+            if (!m_controllingPrim.Flying && m_controllingPrim.IsColliding && stepVelocity.Z > 0)
+            {
+                // We allow the upward force to happen for this many frames.
+                m_jumpFrames = BSParam.AvatarJumpFrames;
+                m_jumpVelocity = stepVelocity.Z;
+            }
+
+            // The case where the avatar is not colliding and is not flying is special.
+            // The avatar is either falling or jumping and the user can be applying force to the avatar
+            //     (force in some direction or force up or down).
+            // If the avatar has negative Z velocity and is not colliding, presume we're falling and keep the velocity.
+            // If the user is trying to apply upward force but we're not colliding, assume the avatar
+            //     is trying to jump and don't apply the upward force if not touching the ground any more.
+            if (!m_controllingPrim.Flying && !m_controllingPrim.IsColliding)
+            {
+                // If upward velocity is being applied, this must be a jump and only allow that to go on so long
+                if (m_jumpFrames > 0)
+                {
+                    // Since not touching the ground, only apply upward force for so long.
+                    m_jumpFrames--;
+                    stepVelocity.Z = m_jumpVelocity;
+                }
+                else
+                {
+                    
+                    // Since we're not affected by anything, the avatar must be falling and we do not want that to be too fast.
+                    if (m_controllingPrim.RawVelocity.Z < BSParam.AvatarTerminalVelocity)
+                    {
+                        
+                        stepVelocity.Z = BSParam.AvatarTerminalVelocity;
+                    }
+                    else
+                    {
+                        stepVelocity.Z = m_controllingPrim.RawVelocity.Z;
+                    }
+                }
+                // DetailLog("{0},BSCharacter.MoveMotor,taint,overrideStepZWithWorldZ,stepVel={1}", LocalID, stepVelocity);
+            }
+
+            //Alicia: Maintain minimum height when flying.
+            // SL has a flying effect that keeps the avatar flying above the ground by some margin
+            if (m_controllingPrim.Flying)
+            {
+                float hover_height = m_physicsScene.TerrainManager.GetTerrainHeightAtXYZ(m_controllingPrim.RawPosition)
+                                                        + BSParam.AvatarFlyingGroundMargin;
+
+                if( m_controllingPrim.Position.Z < hover_height)
+                {
+                    stepVelocity.Z += BSParam.AvatarFlyingGroundUpForce;
+                }
+            }
+
+            // 'stepVelocity' is now the speed we'd like the avatar to move in. Turn that into an instantanous force.
+            OMV.Vector3 moveForce = (stepVelocity - m_controllingPrim.RawVelocity) * m_controllingPrim.Mass;
+
+            // Add special movement force to allow avatars to walk up stepped surfaces.
+            moveForce += WalkUpStairs();
+
+            m_physicsScene.DetailLog("{0},BSCharacter.MoveMotor,move,stepVel={1},vel={2},mass={3},moveForce={4}",
+                            m_controllingPrim.LocalID, stepVelocity, m_controllingPrim.RawVelocity, m_controllingPrim.Mass, moveForce);
+            m_physicsScene.PE.ApplyCentralImpulse(m_controllingPrim.PhysBody, moveForce);
+        }
+    }
+
+    // Called just as the property update is received from the physics engine.
+    // Do any mode necessary for avatar movement.
+    private void Process_OnPreUpdateProperty(ref EntityProperties entprop)
+    {
+        // Don't change position if standing on a stationary object.
+        if (m_controllingPrim.IsStationary)
+        {
+            entprop.Position = m_controllingPrim.RawPosition;
+            entprop.Velocity = OMV.Vector3.Zero;
+            m_physicsScene.PE.SetTranslation(m_controllingPrim.PhysBody, entprop.Position, entprop.Rotation);
+        }
+
+    }
+
+    // Decide if the character is colliding with a low object and compute a force to pop the
+    //    avatar up so it can walk up and over the low objects.
+    private OMV.Vector3 WalkUpStairs()
+    {
+        OMV.Vector3 ret = OMV.Vector3.Zero;
+
+        m_physicsScene.DetailLog("{0},BSCharacter.WalkUpStairs,IsColliding={1},flying={2},targSpeed={3},collisions={4},avHeight={5}",
+                        m_controllingPrim.LocalID, m_controllingPrim.IsColliding, m_controllingPrim.Flying,
+                        m_controllingPrim.TargetVelocitySpeed, m_controllingPrim.CollisionsLastTick.Count, m_controllingPrim.Size.Z);
+
+        // Check for stairs climbing if colliding, not flying and moving forward
+        if ( m_controllingPrim.IsColliding
+                    && !m_controllingPrim.Flying
+                    && m_controllingPrim.TargetVelocitySpeed > 0.1f )
+        {
+            // The range near the character's feet where we will consider stairs
+            // float nearFeetHeightMin = m_controllingPrim.RawPosition.Z - (m_controllingPrim.Size.Z / 2f) + 0.05f;
+            // Note: there is a problem with the computation of the capsule height. Thus RawPosition is off
+            //    from the height. Revisit size and this computation when height is scaled properly.
+            float nearFeetHeightMin = m_controllingPrim.RawPosition.Z - (m_controllingPrim.Size.Z / 2f) - BSParam.AvatarStepGroundFudge;
+            float nearFeetHeightMax = nearFeetHeightMin + BSParam.AvatarStepHeight;
+
+            // Look for a collision point that is near the character's feet and is oriented the same as the charactor is.
+            // Find the highest 'good' collision.
+            OMV.Vector3 highestTouchPosition = OMV.Vector3.Zero;
+            foreach (KeyValuePair<uint, ContactPoint> kvp in m_controllingPrim.CollisionsLastTick.m_objCollisionList)
+            {
+                // Don't care about collisions with the terrain
+                if (kvp.Key > m_physicsScene.TerrainManager.HighestTerrainID)
+                {
+                    BSPhysObject collisionObject;
+                    if (m_physicsScene.PhysObjects.TryGetValue(kvp.Key, out collisionObject))
+                    {
+                        if (!collisionObject.IsVolumeDetect)
+                        {
+                            OMV.Vector3 touchPosition = kvp.Value.Position;
+                            m_physicsScene.DetailLog("{0},BSCharacter.WalkUpStairs,min={1},max={2},touch={3}",
+                                            m_controllingPrim.LocalID, nearFeetHeightMin, nearFeetHeightMax, touchPosition);
+                            if (touchPosition.Z >= nearFeetHeightMin && touchPosition.Z <= nearFeetHeightMax)
+                            {
+                                // This contact is within the 'near the feet' range.
+                                // The step is presumed to be more or less vertical. Thus the Z component should
+                                //    be nearly horizontal.
+                                OMV.Vector3 directionFacing = OMV.Vector3.UnitX * m_controllingPrim.RawOrientation;
+                                OMV.Vector3 touchNormal = OMV.Vector3.Normalize(kvp.Value.SurfaceNormal);
+                                const float PIOver2 = 1.571f; // Used to make unit vector axis into approx radian angles
+                                // m_physicsScene.DetailLog("{0},BSCharacter.WalkUpStairs,avNormal={1},colNormal={2},diff={3}",
+                                //             m_controllingPrim.LocalID, directionFacing, touchNormal,
+                                //             Math.Abs(OMV.Vector3.Distance(directionFacing, touchNormal)) );
+                                if ((Math.Abs(directionFacing.Z) * PIOver2) < BSParam.AvatarStepAngle
+                                    && (Math.Abs(touchNormal.Z) * PIOver2) < BSParam.AvatarStepAngle)
+                                {
+                                    // The normal should be our contact point to the object so it is pointing away
+                                    //    thus the difference between our facing orientation and the normal should be small.
+                                    float diff = Math.Abs(OMV.Vector3.Distance(directionFacing, touchNormal));
+                                    if (diff < BSParam.AvatarStepApproachFactor)
+                                    {
+                                        if (highestTouchPosition.Z < touchPosition.Z)
+                                            highestTouchPosition = touchPosition;
+                                    }
+                                }
+                            }
+                        }
+                    }
+                }
+            }
+            m_walkingUpStairs = 0;
+            // If there is a good step sensing, move the avatar over the step.
+            if (highestTouchPosition != OMV.Vector3.Zero)
+            {
+                // Remember that we are going up stairs. This is needed because collisions
+                //    will stop when we move up so this smoothes out that effect.
+                m_walkingUpStairs = BSParam.AvatarStepSmoothingSteps;
+
+                m_lastStepUp = highestTouchPosition.Z - nearFeetHeightMin;
+                ret = ComputeStairCorrection(m_lastStepUp);
+                m_physicsScene.DetailLog("{0},BSCharacter.WalkUpStairs,touchPos={1},nearFeetMin={2},ret={3}",
+                        m_controllingPrim.LocalID, highestTouchPosition, nearFeetHeightMin, ret);
+            }
+        }
+        else
+        {
+            // If we used to be going up stairs but are not now, smooth the case where collision goes away while
+            //    we are bouncing up the stairs.
+            if (m_walkingUpStairs > 0)
+            {
+                m_walkingUpStairs--;
+                ret = ComputeStairCorrection(m_lastStepUp);
+            }
+        }
+
+        return ret;
+    }
+
+    private OMV.Vector3 ComputeStairCorrection(float stepUp)
+    {
+        OMV.Vector3 ret = OMV.Vector3.Zero;
+        OMV.Vector3 displacement = OMV.Vector3.Zero;
+
+        if (stepUp > 0f)
+        {
+            // Found the stairs contact point. Push up a little to raise the character.
+            if (BSParam.AvatarStepForceFactor > 0f)
+            {
+                float upForce = stepUp * m_controllingPrim.Mass * BSParam.AvatarStepForceFactor;
+                ret = new OMV.Vector3(0f, 0f, upForce);
+            }
+
+            // Also move the avatar up for the new height
+            if (BSParam.AvatarStepUpCorrectionFactor > 0f)
+            {
+                // Move the avatar up related to the height of the collision
+                displacement = new OMV.Vector3(0f, 0f, stepUp * BSParam.AvatarStepUpCorrectionFactor);
+                m_controllingPrim.ForcePosition = m_controllingPrim.RawPosition + displacement;
+            }
+            else
+            {
+                if (BSParam.AvatarStepUpCorrectionFactor < 0f)
+                {
+                    // Move the avatar up about the specified step height
+                    displacement = new OMV.Vector3(0f, 0f, BSParam.AvatarStepHeight);
+                    m_controllingPrim.ForcePosition = m_controllingPrim.RawPosition + displacement;
+                }
+            }
+            m_physicsScene.DetailLog("{0},BSCharacter.WalkUpStairs.ComputeStairCorrection,stepUp={1},isp={2},force={3}",
+                                        m_controllingPrim.LocalID, stepUp, displacement, ret);
+
+        }
+        return ret;
+    }
+}
+}
+
+
diff --git a/OpenSim/Region/PhysicsModules/BulletS/BSActorHover.cs b/OpenSim/Region/PhysicsModules/BulletS/BSActorHover.cs
new file mode 100755
index 0000000..7ff171e
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/BSActorHover.cs
@@ -0,0 +1,174 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyrightD
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Text;
+
+using OpenSim.Region.PhysicsModules.SharedBase;
+
+using OMV = OpenMetaverse;
+
+namespace OpenSim.Region.PhysicsModule.BulletS
+{
+public class BSActorHover : BSActor
+{
+    private BSFMotor m_hoverMotor;
+
+    public BSActorHover(BSScene physicsScene, BSPhysObject pObj, string actorName)
+        : base(physicsScene, pObj, actorName)
+    {
+        m_hoverMotor = null;
+        m_physicsScene.DetailLog("{0},BSActorHover,constructor", m_controllingPrim.LocalID);
+    }
+
+    // BSActor.isActive
+    public override bool isActive
+    {
+        get { return Enabled; }
+    }
+
+    // Release any connections and resources used by the actor.
+    // BSActor.Dispose()
+    public override void Dispose()
+    {
+        Enabled = false;
+        DeactivateHover();
+    }
+
+    // Called when physical parameters (properties set in Bullet) need to be re-applied.
+    // Called at taint-time.
+    // BSActor.Refresh()
+    public override void Refresh()
+    {
+        m_physicsScene.DetailLog("{0},BSActorHover,refresh", m_controllingPrim.LocalID);
+
+        // If not active any more, turn me off
+        if (!m_controllingPrim.HoverActive)
+        {
+            SetEnabled(false);
+        }
+
+        // If the object is physically active, add the hoverer prestep action
+        if (isActive)
+        {
+            ActivateHover();
+        }
+        else
+        {
+            DeactivateHover();
+        }
+    }
+
+    // The object's physical representation is being rebuilt so pick up any physical dependencies (constraints, ...).
+    //     Register a prestep action to restore physical requirements before the next simulation step.
+    // Called at taint-time.
+    // BSActor.RemoveDependencies()
+    public override void RemoveDependencies()
+    {
+        // Nothing to do for the hoverer since it is all software at pre-step action time.
+    }
+
+    // If a hover motor has not been created, create one and start the hovering.
+    private void ActivateHover()
+    {
+        if (m_hoverMotor == null)
+        {
+            // Turning the target on
+            m_hoverMotor = new BSFMotor("BSActorHover",
+                                        m_controllingPrim.HoverTau,               // timeScale
+                                        BSMotor.Infinite,           // decay time scale
+                                        1f                          // efficiency
+            );
+            m_hoverMotor.SetTarget(ComputeCurrentHoverHeight());
+            m_hoverMotor.SetCurrent(m_controllingPrim.RawPosition.Z);
+            m_hoverMotor.PhysicsScene = m_physicsScene; // DEBUG DEBUG so motor will output detail log messages.
+
+            m_physicsScene.BeforeStep += Hoverer;
+        }
+    }
+
+    private void DeactivateHover()
+    {
+        if (m_hoverMotor != null)
+        {
+            m_physicsScene.BeforeStep -= Hoverer;
+            m_hoverMotor = null;
+        }
+    }
+
+    // Called just before the simulation step. Update the vertical position for hoverness.
+    private void Hoverer(float timeStep)
+    {
+        // Don't do hovering while the object is selected.
+        if (!isActive)
+            return;
+
+        m_hoverMotor.SetCurrent(m_controllingPrim.RawPosition.Z);
+        m_hoverMotor.SetTarget(ComputeCurrentHoverHeight());
+        float targetHeight = m_hoverMotor.Step(timeStep);
+
+        // 'targetHeight' is where we'd like the Z of the prim to be at this moment.
+        // Compute the amount of force to push us there.
+        float moveForce = (targetHeight - m_controllingPrim.RawPosition.Z) * m_controllingPrim.RawMass;
+        // Undo anything the object thinks it's doing at the moment
+        moveForce = -m_controllingPrim.RawVelocity.Z * m_controllingPrim.Mass;
+
+        m_physicsScene.PE.ApplyCentralImpulse(m_controllingPrim.PhysBody, new OMV.Vector3(0f, 0f, moveForce));
+        m_physicsScene.DetailLog("{0},BSPrim.Hover,move,targHt={1},moveForce={2},mass={3}",
+                        m_controllingPrim.LocalID, targetHeight, moveForce, m_controllingPrim.RawMass);
+    }
+
+    // Based on current position, determine what we should be hovering at now.
+    // Must recompute often. What if we walked offa cliff>
+    private float ComputeCurrentHoverHeight()
+    {
+        float ret = m_controllingPrim.HoverHeight;
+        float groundHeight = m_physicsScene.TerrainManager.GetTerrainHeightAtXYZ(m_controllingPrim.RawPosition);
+
+        switch (m_controllingPrim.HoverType)
+        {
+            case PIDHoverType.Ground:
+                ret = groundHeight + m_controllingPrim.HoverHeight;
+                break;
+            case PIDHoverType.GroundAndWater:
+                float waterHeight = m_physicsScene.TerrainManager.GetWaterLevelAtXYZ(m_controllingPrim.RawPosition);
+                if (groundHeight > waterHeight)
+                {
+                    ret = groundHeight + m_controllingPrim.HoverHeight;
+                }
+                else
+                {
+                    ret = waterHeight + m_controllingPrim.HoverHeight;
+                }
+                break;
+        }
+        return ret;
+    }
+}
+}
diff --git a/OpenSim/Region/PhysicsModules/BulletS/BSActorLockAxis.cs b/OpenSim/Region/PhysicsModules/BulletS/BSActorLockAxis.cs
new file mode 100755
index 0000000..78c1b6a
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/BSActorLockAxis.cs
@@ -0,0 +1,219 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyrightD
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Text;
+
+using OMV = OpenMetaverse;
+
+namespace OpenSim.Region.PhysicsModule.BulletS
+{
+public class BSActorLockAxis : BSActor
+{
+    private BSConstraint LockAxisConstraint = null;
+    private bool HaveRegisteredForBeforeStepCallback = false;
+
+    // The lock access flags (which axises were locked) when the contraint was built.
+    // Used to see if locking has changed since when the constraint was built.
+    OMV.Vector3 LockAxisLinearFlags;
+    OMV.Vector3 LockAxisAngularFlags;
+
+    public BSActorLockAxis(BSScene physicsScene, BSPhysObject pObj, string actorName)
+        : base(physicsScene, pObj, actorName)
+    {
+        m_physicsScene.DetailLog("{0},BSActorLockAxis,constructor", m_controllingPrim.LocalID);
+        LockAxisConstraint = null;
+        HaveRegisteredForBeforeStepCallback = false;
+    }
+
+    // BSActor.isActive
+    public override bool isActive
+    {
+        get { return Enabled && m_controllingPrim.IsPhysicallyActive; }
+    }
+
+    // Release any connections and resources used by the actor.
+    // BSActor.Dispose()
+    public override void Dispose()
+    {
+        Enabled = false;
+        UnRegisterForBeforeStepCallback();
+        RemoveAxisLockConstraint();
+    }
+
+    // Called when physical parameters (properties set in Bullet) need to be re-applied.
+    // Called at taint-time.
+    // BSActor.Refresh()
+    public override void Refresh()
+    {
+        // Since the axis logging is done with a constraint, Refresh() time is good for
+        //    changing parameters but this needs to wait until the prim/linkset is physically
+        //    constructed. Therefore, the constraint itself is placed at pre-step time.
+
+        // If all the axis are free, we don't need to exist
+        // Refresh() only turns off. Enabling is done by InitializeAxisActor()
+        //      whenever parameters are changed.
+        //      This leaves 'enable' free to turn off an actor when it is not wanted to run.
+        if (m_controllingPrim.LockedAngularAxis == m_controllingPrim.LockedAxisFree
+                && m_controllingPrim.LockedLinearAxis == m_controllingPrim.LockedAxisFree)
+        {
+            Enabled = false;
+        }
+
+        if (isActive)
+        {
+            RegisterForBeforeStepCallback();
+        }
+        else
+        {
+            RemoveDependencies();
+            UnRegisterForBeforeStepCallback();
+        }
+    }
+
+    // The object's physical representation is being rebuilt so pick up any physical dependencies (constraints, ...).
+    //     Register a prestep action to restore physical requirements before the next simulation step.
+    // Called at taint-time.
+    // BSActor.RemoveDependencies()
+    public override void RemoveDependencies()
+    {
+        RemoveAxisLockConstraint();
+    }
+
+    private void RegisterForBeforeStepCallback()
+    {
+        if (!HaveRegisteredForBeforeStepCallback)
+        {
+            m_physicsScene.BeforeStep += PhysicsScene_BeforeStep;
+            HaveRegisteredForBeforeStepCallback = true;
+        }
+    }
+
+    private void UnRegisterForBeforeStepCallback()
+    {
+        if (HaveRegisteredForBeforeStepCallback)
+        {
+            m_physicsScene.BeforeStep -= PhysicsScene_BeforeStep;
+            HaveRegisteredForBeforeStepCallback = false;
+        }
+    }
+
+    private void PhysicsScene_BeforeStep(float timestep)
+    {
+        // If all the axis are free, we don't need to exist
+        if (m_controllingPrim.LockedAngularAxis == m_controllingPrim.LockedAxisFree
+                && m_controllingPrim.LockedLinearAxis == m_controllingPrim.LockedAxisFree)
+        {
+            Enabled = false;
+        }
+
+        // If the object is physically active, add the axis locking constraint
+        if (isActive)
+        {
+            // Check to see if the locking parameters have changed
+            if (m_controllingPrim.LockedLinearAxis != this.LockAxisLinearFlags
+                || m_controllingPrim.LockedAngularAxis != this.LockAxisAngularFlags)
+            {
+                // The locking has changed. Remove the old constraint and build a new one
+                RemoveAxisLockConstraint();
+            }
+
+            AddAxisLockConstraint();
+        }
+        else
+        {
+            RemoveAxisLockConstraint();
+        }
+    }
+
+    // Note that this relies on being called at TaintTime
+    private void AddAxisLockConstraint()
+    {
+        if (LockAxisConstraint == null)
+        {
+            // Lock that axis by creating a 6DOF constraint that has one end in the world and
+            //    the other in the object.
+            // http://www.bulletphysics.org/Bullet/phpBB3/viewtopic.php?p=20817
+            // http://www.bulletphysics.org/Bullet/phpBB3/viewtopic.php?p=26380
+
+            // Remove any existing axis constraint (just to be sure)
+            RemoveAxisLockConstraint();
+
+            BSConstraint6Dof axisConstrainer = new BSConstraint6Dof(m_physicsScene.World, m_controllingPrim.PhysBody,
+                                OMV.Vector3.Zero, OMV.Quaternion.Identity,
+                                false /* useLinearReferenceFrameB */, true /* disableCollisionsBetweenLinkedBodies */);
+            LockAxisConstraint = axisConstrainer;
+            m_physicsScene.Constraints.AddConstraint(LockAxisConstraint);
+
+            // Remember the clocking being inforced so we can notice if they have changed
+            LockAxisLinearFlags = m_controllingPrim.LockedLinearAxis;
+            LockAxisAngularFlags = m_controllingPrim.LockedAngularAxis;
+
+            // The constraint is tied to the world and oriented to the prim.
+
+            if (!axisConstrainer.SetLinearLimits(m_controllingPrim.LockedLinearAxisLow, m_controllingPrim.LockedLinearAxisHigh))
+            {
+                m_physicsScene.DetailLog("{0},BSActorLockAxis.AddAxisLockConstraint,failedSetLinearLimits",
+                        m_controllingPrim.LocalID);
+            }
+
+            if (!axisConstrainer.SetAngularLimits(m_controllingPrim.LockedAngularAxisLow, m_controllingPrim.LockedAngularAxisHigh))
+            {
+                m_physicsScene.DetailLog("{0},BSActorLockAxis.AddAxisLockConstraint,failedSetAngularLimits",
+                        m_controllingPrim.LocalID);
+            }
+
+            m_physicsScene.DetailLog("{0},BSActorLockAxis.AddAxisLockConstraint,create,linLow={1},linHi={2},angLow={3},angHi={4}",
+                                        m_controllingPrim.LocalID,
+                                        m_controllingPrim.LockedLinearAxisLow,
+                                        m_controllingPrim.LockedLinearAxisHigh,
+                                        m_controllingPrim.LockedAngularAxisLow,
+                                        m_controllingPrim.LockedAngularAxisHigh);
+
+            // Constants from one of the posts mentioned above and used in Bullet's ConstraintDemo.
+            axisConstrainer.TranslationalLimitMotor(true /* enable */, 5.0f, 0.1f);
+
+            axisConstrainer.RecomputeConstraintVariables(m_controllingPrim.RawMass);
+
+            RegisterForBeforeStepCallback();
+        }
+    }
+
+    private void RemoveAxisLockConstraint()
+    {
+        UnRegisterForBeforeStepCallback();
+        if (LockAxisConstraint != null)
+        {
+            m_physicsScene.Constraints.RemoveAndDestroyConstraint(LockAxisConstraint);
+            LockAxisConstraint = null;
+            m_physicsScene.DetailLog("{0},BSActorLockAxis.RemoveAxisLockConstraint,destroyingConstraint", m_controllingPrim.LocalID);
+        }
+    }
+}
+}
diff --git a/OpenSim/Region/PhysicsModules/BulletS/BSActorMoveToTarget.cs b/OpenSim/Region/PhysicsModules/BulletS/BSActorMoveToTarget.cs
new file mode 100755
index 0000000..3db8f2c
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/BSActorMoveToTarget.cs
@@ -0,0 +1,220 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyrightD
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Text;
+
+using OpenSim.Region.PhysicsModules.SharedBase;
+
+using OMV = OpenMetaverse;
+
+namespace OpenSim.Region.PhysicsModule.BulletS
+{
+public class BSActorMoveToTarget : BSActor
+{
+    private BSVMotor m_targetMotor;
+
+    public BSActorMoveToTarget(BSScene physicsScene, BSPhysObject pObj, string actorName)
+        : base(physicsScene, pObj, actorName)
+    {
+        m_targetMotor = null;
+        m_physicsScene.DetailLog("{0},BSActorMoveToTarget,constructor", m_controllingPrim.LocalID);
+    }
+
+    // BSActor.isActive
+    public override bool isActive
+    {
+        // MoveToTarget only works on physical prims
+        get { return Enabled && m_controllingPrim.IsPhysicallyActive; }
+    }
+
+    // Release any connections and resources used by the actor.
+    // BSActor.Dispose()
+    public override void Dispose()
+    {
+        Enabled = false;
+        DeactivateMoveToTarget();
+    }
+
+    // Called when physical parameters (properties set in Bullet) need to be re-applied.
+    // Called at taint-time.
+    // BSActor.Refresh()
+    public override void Refresh()
+    {
+        m_physicsScene.DetailLog("{0},BSActorMoveToTarget,refresh,enabled={1},active={2},target={3},tau={4}",
+            m_controllingPrim.LocalID, Enabled, m_controllingPrim.MoveToTargetActive,
+            m_controllingPrim.MoveToTargetTarget, m_controllingPrim.MoveToTargetTau );
+
+        // If not active any more...
+        if (!m_controllingPrim.MoveToTargetActive)
+        {
+            Enabled = false;
+        }
+
+        if (isActive)
+        {
+            ActivateMoveToTarget();
+        }
+        else
+        {
+            DeactivateMoveToTarget();
+        }
+    }
+
+    // The object's physical representation is being rebuilt so pick up any physical dependencies (constraints, ...).
+    //     Register a prestep action to restore physical requirements before the next simulation step.
+    // Called at taint-time.
+    // BSActor.RemoveDependencies()
+    public override void RemoveDependencies()
+    {
+        // Nothing to do for the moveToTarget since it is all software at pre-step action time.
+    }
+
+    // If a hover motor has not been created, create one and start the hovering.
+    private void ActivateMoveToTarget()
+    {
+        if (m_targetMotor == null)
+        {
+            // We're taking over after this.
+            m_controllingPrim.ZeroMotion(true);
+
+            /* Someday use the PID controller
+            m_targetMotor = new BSPIDVMotor("BSActorMoveToTarget-" + m_controllingPrim.LocalID.ToString());
+            m_targetMotor.TimeScale = m_controllingPrim.MoveToTargetTau;
+            m_targetMotor.Efficiency = 1f;
+             */
+            m_targetMotor = new BSVMotor("BSActorMoveToTarget-" + m_controllingPrim.LocalID.ToString(),
+                                        m_controllingPrim.MoveToTargetTau,  // timeScale
+                                        BSMotor.Infinite,                   // decay time scale
+                                        1f                                  // efficiency
+            );
+            m_targetMotor.PhysicsScene = m_physicsScene; // DEBUG DEBUG so motor will output detail log messages.
+            m_targetMotor.SetTarget(m_controllingPrim.MoveToTargetTarget);
+            m_targetMotor.SetCurrent(m_controllingPrim.RawPosition);
+
+            // m_physicsScene.BeforeStep += Mover;
+            m_physicsScene.BeforeStep += Mover2;
+        }
+        else
+        {
+            // If already allocated, make sure the target and other paramters are current
+            m_targetMotor.SetTarget(m_controllingPrim.MoveToTargetTarget);
+            m_targetMotor.SetCurrent(m_controllingPrim.RawPosition);
+        }
+    }
+
+    private void DeactivateMoveToTarget()
+    {
+        if (m_targetMotor != null)
+        {
+            // m_physicsScene.BeforeStep -= Mover;
+            m_physicsScene.BeforeStep -= Mover2;
+            m_targetMotor = null;
+        }
+    }
+
+    // Origional mover that set the objects position to move to the target.
+    // The problem was that gravity would keep trying to push the object down so
+    //    the overall downward velocity would increase to infinity.
+    // Called just before the simulation step.
+    private void Mover(float timeStep)
+    {
+        // Don't do hovering while the object is selected.
+        if (!isActive)
+            return;
+
+        OMV.Vector3 origPosition = m_controllingPrim.RawPosition;     // DEBUG DEBUG (for printout below)
+
+        // 'movePosition' is where we'd like the prim to be at this moment.
+        OMV.Vector3 movePosition = m_controllingPrim.RawPosition + m_targetMotor.Step(timeStep);
+
+        // If we are very close to our target, turn off the movement motor.
+        if (m_targetMotor.ErrorIsZero())
+        {
+            m_physicsScene.DetailLog("{0},BSActorMoveToTarget.Mover,zeroMovement,movePos={1},pos={2},mass={3}",
+                                    m_controllingPrim.LocalID, movePosition, m_controllingPrim.RawPosition, m_controllingPrim.Mass);
+            m_controllingPrim.ForcePosition = m_targetMotor.TargetValue;
+            m_controllingPrim.ForceVelocity = OMV.Vector3.Zero;
+            // Setting the position does not cause the physics engine to generate a property update. Force it.
+            m_physicsScene.PE.PushUpdate(m_controllingPrim.PhysBody);
+        }
+        else
+        {
+            m_controllingPrim.ForcePosition = movePosition;
+            // Setting the position does not cause the physics engine to generate a property update. Force it.
+            m_physicsScene.PE.PushUpdate(m_controllingPrim.PhysBody);
+        }
+        m_physicsScene.DetailLog("{0},BSActorMoveToTarget.Mover,move,fromPos={1},movePos={2}",
+                                        m_controllingPrim.LocalID, origPosition, movePosition);
+    }
+
+    // Version of mover that applies forces to move the physical object to the target.
+    // Also overcomes gravity so the object doesn't just drop to the ground.
+    // Called just before the simulation step.
+    private void Mover2(float timeStep)
+    {
+        // Don't do hovering while the object is selected.
+        if (!isActive)
+            return;
+
+        OMV.Vector3 origPosition = m_controllingPrim.RawPosition;     // DEBUG DEBUG (for printout below)
+        OMV.Vector3 addedForce = OMV.Vector3.Zero;
+
+        // CorrectionVector is the movement vector required this step
+        OMV.Vector3 correctionVector = m_targetMotor.Step(timeStep, m_controllingPrim.RawPosition);
+
+        // If we are very close to our target, turn off the movement motor.
+        if (m_targetMotor.ErrorIsZero())
+        {
+            m_physicsScene.DetailLog("{0},BSActorMoveToTarget.Mover3,zeroMovement,pos={1},mass={2}",
+                                    m_controllingPrim.LocalID, m_controllingPrim.RawPosition, m_controllingPrim.Mass);
+            m_controllingPrim.ForcePosition = m_targetMotor.TargetValue;
+            m_controllingPrim.ForceVelocity = OMV.Vector3.Zero;
+            // Setting the position does not cause the physics engine to generate a property update. Force it.
+            m_physicsScene.PE.PushUpdate(m_controllingPrim.PhysBody);
+        }
+        else
+        {
+            // First force to move us there -- the motor return a timestep scaled value.
+            addedForce = correctionVector / timeStep;
+            // Remove the existing velocity (only the moveToTarget force counts)
+            addedForce -= m_controllingPrim.RawVelocity;
+            // Overcome gravity. 
+            addedForce -= m_controllingPrim.Gravity;
+
+            // Add enough force to overcome the mass of the object
+            addedForce *= m_controllingPrim.Mass;
+
+            m_controllingPrim.AddForce(addedForce, false /* pushForce */, true /* inTaintTime */);
+        }
+        m_physicsScene.DetailLog("{0},BSActorMoveToTarget.Mover3,move,fromPos={1},addedForce={2}",
+                                        m_controllingPrim.LocalID, origPosition, addedForce);
+    }
+}
+}
diff --git a/OpenSim/Region/PhysicsModules/BulletS/BSActorSetForce.cs b/OpenSim/Region/PhysicsModules/BulletS/BSActorSetForce.cs
new file mode 100755
index 0000000..ecb4b7f
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/BSActorSetForce.cs
@@ -0,0 +1,138 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyrightD
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Text;
+
+using OpenSim.Region.PhysicsModules.SharedBase;
+
+using OMV = OpenMetaverse;
+
+namespace OpenSim.Region.PhysicsModule.BulletS
+{
+public class BSActorSetForce : BSActor
+{
+    BSFMotor m_forceMotor;
+
+    public BSActorSetForce(BSScene physicsScene, BSPhysObject pObj, string actorName)
+        : base(physicsScene, pObj, actorName)
+    {
+        m_forceMotor = null;
+        m_physicsScene.DetailLog("{0},BSActorSetForce,constructor", m_controllingPrim.LocalID);
+    }
+
+    // BSActor.isActive
+    public override bool isActive
+    {
+        get { return Enabled && m_controllingPrim.IsPhysicallyActive; }
+    }
+
+    // Release any connections and resources used by the actor.
+    // BSActor.Dispose()
+    public override void Dispose()
+    {
+        Enabled = false;
+        DeactivateSetForce();
+    }
+
+    // Called when physical parameters (properties set in Bullet) need to be re-applied.
+    // Called at taint-time.
+    // BSActor.Refresh()
+    public override void Refresh()
+    {
+        m_physicsScene.DetailLog("{0},BSActorSetForce,refresh", m_controllingPrim.LocalID);
+
+        // If not active any more, get rid of me (shouldn't ever happen, but just to be safe)
+        if (m_controllingPrim.RawForce == OMV.Vector3.Zero)
+        {
+            m_physicsScene.DetailLog("{0},BSActorSetForce,refresh,notSetForce,removing={1}", m_controllingPrim.LocalID, ActorName);
+            Enabled = false;
+            return;
+        }
+
+        // If the object is physically active, add the hoverer prestep action
+        if (isActive)
+        {
+            ActivateSetForce();
+        }
+        else
+        {
+            DeactivateSetForce();
+        }
+    }
+
+    // The object's physical representation is being rebuilt so pick up any physical dependencies (constraints, ...).
+    //     Register a prestep action to restore physical requirements before the next simulation step.
+    // Called at taint-time.
+    // BSActor.RemoveDependencies()
+    public override void RemoveDependencies()
+    {
+        // Nothing to do for the hoverer since it is all software at pre-step action time.
+    }
+
+    // If a hover motor has not been created, create one and start the hovering.
+    private void ActivateSetForce()
+    {
+        if (m_forceMotor == null)
+        {
+            // A fake motor that might be used someday
+            m_forceMotor = new BSFMotor("setForce", 1f, 1f, 1f);
+
+            m_physicsScene.BeforeStep += Mover;
+        }
+    }
+
+    private void DeactivateSetForce()
+    {
+        if (m_forceMotor != null)
+        {
+            m_physicsScene.BeforeStep -= Mover;
+            m_forceMotor = null;
+        }
+    }
+
+    // Called just before the simulation step. Update the vertical position for hoverness.
+    private void Mover(float timeStep)
+    {
+        // Don't do force while the object is selected.
+        if (!isActive)
+            return;
+
+        m_physicsScene.DetailLog("{0},BSActorSetForce,preStep,force={1}", m_controllingPrim.LocalID, m_controllingPrim.RawForce);
+        if (m_controllingPrim.PhysBody.HasPhysicalBody)
+        {
+            m_physicsScene.PE.ApplyCentralForce(m_controllingPrim.PhysBody, m_controllingPrim.RawForce);
+            m_controllingPrim.ActivateIfPhysical(false);
+        }
+
+        // TODO:
+    }
+}
+}
+
diff --git a/OpenSim/Region/PhysicsModules/BulletS/BSActorSetTorque.cs b/OpenSim/Region/PhysicsModules/BulletS/BSActorSetTorque.cs
new file mode 100755
index 0000000..a1cf4db
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/BSActorSetTorque.cs
@@ -0,0 +1,139 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyrightD
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Text;
+
+using OpenSim.Region.PhysicsModules.SharedBase;
+
+using OMV = OpenMetaverse;
+
+namespace OpenSim.Region.PhysicsModule.BulletS
+{
+public class BSActorSetTorque : BSActor
+{
+    BSFMotor m_torqueMotor;
+
+    public BSActorSetTorque(BSScene physicsScene, BSPhysObject pObj, string actorName)
+        : base(physicsScene, pObj, actorName)
+    {
+        m_torqueMotor = null;
+        m_physicsScene.DetailLog("{0},BSActorSetTorque,constructor", m_controllingPrim.LocalID);
+    }
+
+    // BSActor.isActive
+    public override bool isActive
+    {
+        get { return Enabled && m_controllingPrim.IsPhysicallyActive; }
+    }
+
+    // Release any connections and resources used by the actor.
+    // BSActor.Dispose()
+    public override void Dispose()
+    {
+        Enabled = false;
+        DeactivateSetTorque();
+    }
+
+    // Called when physical parameters (properties set in Bullet) need to be re-applied.
+    // Called at taint-time.
+    // BSActor.Refresh()
+    public override void Refresh()
+    {
+        m_physicsScene.DetailLog("{0},BSActorSetTorque,refresh,torque={1}", m_controllingPrim.LocalID, m_controllingPrim.RawTorque);
+
+        // If not active any more, get rid of me (shouldn't ever happen, but just to be safe)
+        if (m_controllingPrim.RawTorque == OMV.Vector3.Zero)
+        {
+            m_physicsScene.DetailLog("{0},BSActorSetTorque,refresh,notSetTorque,disabling={1}", m_controllingPrim.LocalID, ActorName);
+            Enabled = false;
+            return;
+        }
+
+        // If the object is physically active, add the hoverer prestep action
+        if (isActive)
+        {
+            ActivateSetTorque();
+        }
+        else
+        {
+            DeactivateSetTorque();
+        }
+    }
+
+    // The object's physical representation is being rebuilt so pick up any physical dependencies (constraints, ...).
+    //     Register a prestep action to restore physical requirements before the next simulation step.
+    // Called at taint-time.
+    // BSActor.RemoveDependencies()
+    public override void RemoveDependencies()
+    {
+        // Nothing to do for the hoverer since it is all software at pre-step action time.
+    }
+
+    // If a hover motor has not been created, create one and start the hovering.
+    private void ActivateSetTorque()
+    {
+        if (m_torqueMotor == null)
+        {
+            // A fake motor that might be used someday
+            m_torqueMotor = new BSFMotor("setTorque", 1f, 1f, 1f);
+
+            m_physicsScene.BeforeStep += Mover;
+        }
+    }
+
+    private void DeactivateSetTorque()
+    {
+        if (m_torqueMotor != null)
+        {
+            m_physicsScene.BeforeStep -= Mover;
+            m_torqueMotor = null;
+        }
+    }
+
+    // Called just before the simulation step. Update the vertical position for hoverness.
+    private void Mover(float timeStep)
+    {
+        // Don't do force while the object is selected.
+        if (!isActive)
+            return;
+
+        m_physicsScene.DetailLog("{0},BSActorSetTorque,preStep,force={1}", m_controllingPrim.LocalID, m_controllingPrim.RawTorque);
+        if (m_controllingPrim.PhysBody.HasPhysicalBody)
+        {
+            m_controllingPrim.AddAngularForce(m_controllingPrim.RawTorque, false, true);
+            m_controllingPrim.ActivateIfPhysical(false);
+        }
+
+        // TODO:
+    }
+}
+}
+
+
diff --git a/OpenSim/Region/PhysicsModules/BulletS/BSActors.cs b/OpenSim/Region/PhysicsModules/BulletS/BSActors.cs
new file mode 100755
index 0000000..851347b
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/BSActors.cs
@@ -0,0 +1,154 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyrightD
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+using System;
+using System.Collections.Generic;
+using System.Text;
+
+namespace OpenSim.Region.PhysicsModule.BulletS
+{
+public class BSActorCollection
+{
+    private Dictionary<string, BSActor> m_actors;
+
+    public BSActorCollection()
+    {
+        m_actors = new Dictionary<string, BSActor>();
+    }
+    public void Add(string name, BSActor actor)
+    {
+        lock (m_actors)
+        {
+            if (!m_actors.ContainsKey(name))
+            {
+                m_actors[name] = actor;
+            }
+        }
+    }
+    public bool RemoveAndRelease(string name)
+    {
+        bool ret = false;
+        lock (m_actors)
+        {
+            if (m_actors.ContainsKey(name))
+            {
+                BSActor beingRemoved = m_actors[name];
+                m_actors.Remove(name);
+                beingRemoved.Dispose();
+                ret = true;
+            }
+        }
+        return ret;
+    }
+    public void Clear()
+    {
+        lock (m_actors)
+        {
+            ForEachActor(a => a.Dispose());
+            m_actors.Clear();
+        }
+    }
+    public void Dispose()
+    {
+        Clear();
+    }
+    public bool HasActor(string name)
+    {
+        return m_actors.ContainsKey(name);
+    }
+    public bool TryGetActor(string actorName, out BSActor theActor)
+    {
+        return m_actors.TryGetValue(actorName, out theActor);
+    }
+    public void ForEachActor(Action<BSActor> act)
+    {
+        lock (m_actors)
+        {
+            foreach (KeyValuePair<string, BSActor> kvp in m_actors)
+                act(kvp.Value);
+        }
+    }
+
+    public void Enable(bool enabl)
+    {
+        ForEachActor(a => a.SetEnabled(enabl));
+    }
+    public void Refresh()
+    {
+        ForEachActor(a => a.Refresh());
+    }
+    public void RemoveDependencies()
+    {
+        ForEachActor(a => a.RemoveDependencies());
+    }
+}
+
+// =============================================================================
+/// <summary>
+/// Each physical object can have 'actors' who are pushing the object around.
+/// This can be used for hover, locking axis, making vehicles, etc.
+/// Each physical object can have multiple actors acting on it.
+///
+/// An actor usually registers itself with physics scene events (pre-step action)
+/// and modifies the parameters on the host physical object.
+/// </summary>
+public abstract class BSActor
+{
+    protected BSScene m_physicsScene { get; private set; }
+    protected BSPhysObject m_controllingPrim { get; private set; }
+    public virtual bool Enabled { get; set; }
+    public string ActorName { get; private set; }
+
+    public BSActor(BSScene physicsScene, BSPhysObject pObj, string actorName)
+    {
+        m_physicsScene = physicsScene;
+        m_controllingPrim = pObj;
+        ActorName = actorName;
+        Enabled = true;
+    }
+
+    // Return 'true' if activily updating the prim
+    public virtual bool isActive
+    {
+        get { return Enabled; }
+    }
+
+    // Turn the actor on an off. Only used by ActorCollection to set all enabled/disabled.
+    // Anyone else should assign true/false to 'Enabled'.
+    public void SetEnabled(bool setEnabled)
+    {
+        Enabled = setEnabled;
+    }
+    // Release any connections and resources used by the actor.
+    public abstract void Dispose();
+    // Called when physical parameters (properties set in Bullet) need to be re-applied.
+    public abstract void Refresh();
+    // The object's physical representation is being rebuilt so pick up any physical dependencies (constraints, ...).
+    //     Register a prestep action to restore physical requirements before the next simulation step.
+    public abstract void RemoveDependencies();
+
+}
+}
diff --git a/OpenSim/Region/PhysicsModules/BulletS/BSApiTemplate.cs b/OpenSim/Region/PhysicsModules/BulletS/BSApiTemplate.cs
new file mode 100644
index 0000000..7756b10
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/BSApiTemplate.cs
@@ -0,0 +1,763 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+using System;
+using System.Collections.Generic;
+using System.Runtime.InteropServices;
+using System.Security;
+using System.Text;
+using OpenMetaverse;
+
+namespace OpenSim.Region.PhysicsModule.BulletS {
+
+    // Constraint type values as defined by Bullet
+public enum ConstraintType : int
+{
+        POINT2POINT_CONSTRAINT_TYPE = 3,
+        HINGE_CONSTRAINT_TYPE,
+        CONETWIST_CONSTRAINT_TYPE,
+        D6_CONSTRAINT_TYPE,
+        SLIDER_CONSTRAINT_TYPE,
+        CONTACT_CONSTRAINT_TYPE,
+        D6_SPRING_CONSTRAINT_TYPE,
+        GEAR_CONSTRAINT_TYPE,           // added in Bullet 2.82
+        FIXED_CONSTRAINT_TYPE,          // added in Bullet 2.82
+        MAX_CONSTRAINT_TYPE,            // last type defined by Bullet
+    //
+    BS_FIXED_CONSTRAINT_TYPE = 1234    // BulletSim constraint that is fixed and unmoving
+}
+
+// ===============================================================================
+[StructLayout(LayoutKind.Sequential)]
+public struct ConvexHull
+{
+        Vector3 Offset;
+        int VertexCount;
+        Vector3[] Vertices;
+}
+public enum BSPhysicsShapeType
+{
+        SHAPE_UNKNOWN   = 0,
+        SHAPE_CAPSULE   = 1,
+        SHAPE_BOX       = 2,
+        SHAPE_CONE      = 3,
+        SHAPE_CYLINDER  = 4,
+        SHAPE_SPHERE    = 5,
+        SHAPE_MESH      = 6,
+        SHAPE_HULL      = 7,
+    // following defined by BulletSim
+        SHAPE_GROUNDPLANE  = 20,
+        SHAPE_TERRAIN   = 21,
+        SHAPE_COMPOUND  = 22,
+        SHAPE_HEIGHTMAP = 23,
+    SHAPE_AVATAR    = 24,
+    SHAPE_CONVEXHULL= 25,
+    SHAPE_GIMPACT   = 26,
+};
+
+// The native shapes have predefined shape hash keys
+public enum FixedShapeKey : ulong
+{
+    KEY_NONE        = 0,
+    KEY_BOX         = 1,
+    KEY_SPHERE      = 2,
+    KEY_CONE        = 3,
+    KEY_CYLINDER    = 4,
+    KEY_CAPSULE     = 5,
+    KEY_AVATAR      = 6,
+}
+
+[StructLayout(LayoutKind.Sequential)]
+public struct ShapeData
+{
+    public UInt32 ID;
+    public BSPhysicsShapeType Type;
+    public Vector3 Position;
+    public Quaternion Rotation;
+    public Vector3 Velocity;
+    public Vector3 Scale;
+    public float Mass;
+    public float Buoyancy;
+    public System.UInt64 HullKey;
+    public System.UInt64 MeshKey;
+    public float Friction;
+    public float Restitution;
+    public float Collidable;    // true of things bump into this
+    public float Static;        // true if a static object. Otherwise gravity, etc.
+    public float Solid;         // true if object cannot be passed through
+    public Vector3 Size;
+
+    // note that bools are passed as floats since bool size changes by language and architecture
+    public const float numericTrue = 1f;
+    public const float numericFalse = 0f;
+}
+[StructLayout(LayoutKind.Sequential)]
+public struct SweepHit
+{
+    public UInt32 ID;
+    public float Fraction;
+    public Vector3 Normal;
+    public Vector3 Point;
+}
+[StructLayout(LayoutKind.Sequential)]
+public struct RaycastHit
+{
+    public UInt32 ID;
+    public float Fraction;
+    public Vector3 Normal;
+}
+[StructLayout(LayoutKind.Sequential)]
+public struct CollisionDesc
+{
+    public UInt32 aID;
+    public UInt32 bID;
+    public Vector3 point;
+    public Vector3 normal;
+    public float penetration;
+}
+[StructLayout(LayoutKind.Sequential)]
+public struct EntityProperties
+{
+    public UInt32 ID;
+    public Vector3 Position;
+    public Quaternion Rotation;
+    public Vector3 Velocity;
+    public Vector3 Acceleration;
+    public Vector3 RotationalVelocity;
+
+    public override string ToString()
+    {
+        StringBuilder buff = new StringBuilder();
+        buff.Append("<i=");
+        buff.Append(ID.ToString());
+        buff.Append(",p=");
+        buff.Append(Position.ToString());
+        buff.Append(",r=");
+        buff.Append(Rotation.ToString());
+        buff.Append(",v=");
+        buff.Append(Velocity.ToString());
+        buff.Append(",a=");
+        buff.Append(Acceleration.ToString());
+        buff.Append(",rv=");
+        buff.Append(RotationalVelocity.ToString());
+        buff.Append(">");
+        return buff.ToString();
+    }
+}
+
+// Format of this structure must match the definition in the C++ code
+// NOTE: adding the X causes compile breaks if used. These are unused symbols
+//      that can be removed from both here and the unmanaged definition of this structure.
+[StructLayout(LayoutKind.Sequential)]
+public struct ConfigurationParameters
+{
+    public float defaultFriction;
+    public float defaultDensity;
+    public float defaultRestitution;
+    public float collisionMargin;
+    public float gravity;
+
+        public float maxPersistantManifoldPoolSize;
+        public float maxCollisionAlgorithmPoolSize;
+        public float shouldDisableContactPoolDynamicAllocation;
+        public float shouldForceUpdateAllAabbs;
+        public float shouldRandomizeSolverOrder;
+        public float shouldSplitSimulationIslands;
+        public float shouldEnableFrictionCaching;
+        public float numberOfSolverIterations;
+    public float useSingleSidedMeshes;
+        public float globalContactBreakingThreshold;
+
+    public float physicsLoggingFrames;
+
+    public const float numericTrue = 1f;
+    public const float numericFalse = 0f;
+}
+
+// Parameters passed for the conversion of a mesh to a hull using Bullet's HACD library.
+[StructLayout(LayoutKind.Sequential)]
+public struct HACDParams
+{
+                                            // usual default values
+        public float maxVerticesPerHull;                // 100
+        public float minClusters;                               // 2
+        public float compacityWeight;                   // 0.1
+        public float volumeWeight;                              // 0.0
+        public float concavity;                             // 100
+        public float addExtraDistPoints;                // false
+        public float addNeighboursDistPoints;   // false
+        public float addFacesPoints;                    // false
+        public float shouldAdjustCollisionMargin;       // false
+    // VHACD
+        public float whichHACD;                             // zero if Bullet HACD, non-zero says VHACD
+        // http://kmamou.blogspot.ca/2014/12/v-hacd-20-parameters-description.html
+        public float vHACDresolution;                   // 100,000 max number of voxels generated during voxelization stage
+        public float vHACDdepth;                                // 20 max number of clipping stages
+        public float vHACDconcavity;                    // 0.0025 maximum concavity
+        public float vHACDplaneDownsampling;    // 4 granularity of search for best clipping plane
+        public float vHACDconvexHullDownsampling;       // 4 precision of hull gen process
+        public float vHACDalpha;                                // 0.05 bias toward clipping along symmetry planes
+        public float vHACDbeta;                             // 0.05 bias toward clipping along revolution axis
+        public float vHACDgamma;                                // 0.00125 max concavity when merging
+        public float vHACDpca;                                  // 0 on/off normalizing mesh before decomp
+        public float vHACDmode;                             // 0 0:voxel based, 1: tetrahedron based
+        public float vHACDmaxNumVerticesPerCH;  // 64 max triangles per convex hull
+        public float vHACDminVolumePerCH;               // 0.0001 sampling of generated convex hulls
+}
+
+// The states a bullet collision object can have
+public enum ActivationState : uint
+{
+    ACTIVE_TAG = 1,
+    ISLAND_SLEEPING,
+    WANTS_DEACTIVATION,
+    DISABLE_DEACTIVATION,
+    DISABLE_SIMULATION,
+}
+
+public enum CollisionObjectTypes : int
+{
+    CO_COLLISION_OBJECT             = 1 << 0,
+    CO_RIGID_BODY                   = 1 << 1,
+    CO_GHOST_OBJECT                 = 1 << 2,
+    CO_SOFT_BODY                    = 1 << 3,
+    CO_HF_FLUID                     = 1 << 4,
+    CO_USER_TYPE                    = 1 << 5,
+}
+
+// Values used by Bullet and BulletSim to control object properties.
+// Bullet's "CollisionFlags" has more to do with operations on the
+//    object (if collisions happen, if gravity effects it, ...).
+public enum CollisionFlags : uint
+{
+    CF_STATIC_OBJECT                 = 1 << 0,
+    CF_KINEMATIC_OBJECT              = 1 << 1,
+    CF_NO_CONTACT_RESPONSE           = 1 << 2,
+    CF_CUSTOM_MATERIAL_CALLBACK      = 1 << 3,
+    CF_CHARACTER_OBJECT              = 1 << 4,
+    CF_DISABLE_VISUALIZE_OBJECT      = 1 << 5,
+    CF_DISABLE_SPU_COLLISION_PROCESS = 1 << 6,
+    // Following used by BulletSim to control collisions and updates
+    BS_SUBSCRIBE_COLLISION_EVENTS    = 1 << 10, // return collision events from unmanaged to managed
+    BS_FLOATS_ON_WATER               = 1 << 11, // the object should float at water level
+    BS_VEHICLE_COLLISIONS            = 1 << 12, // return collisions for vehicle ground checking
+    BS_RETURN_ROOT_COMPOUND_SHAPE    = 1 << 13, // return the pos/rot of the root shape in a compound shape
+    BS_NONE                          = 0,
+    BS_ALL                           = 0x7FFF   // collision flags are a signed short
+};
+
+// Values f collisions groups and masks
+public enum CollisionFilterGroups : uint
+{
+    // Don't use the bit definitions!!  Define the use in a
+    //   filter/mask definition below. This way collision interactions
+    //   are more easily found and debugged.
+    BNoneGroup              = 0,
+    BDefaultGroup           = 1 << 0,   // 0001
+    BStaticGroup            = 1 << 1,   // 0002
+    BKinematicGroup         = 1 << 2,   // 0004
+    BDebrisGroup            = 1 << 3,   // 0008
+    BSensorTrigger          = 1 << 4,   // 0010
+    BCharacterGroup         = 1 << 5,   // 0020
+    BAllGroup               = 0x0007FFF,        // collision flags are a signed short
+    // Filter groups defined by BulletSim
+    BGroundPlaneGroup       = 1 << 8,  // 0400
+    BTerrainGroup           = 1 << 9,  // 0800
+    BRaycastGroup           = 1 << 10,  // 1000
+    BSolidGroup             = 1 << 11,  // 2000
+    // BLinksetGroup        = xx  // a linkset proper is either static or dynamic
+    BLinksetChildGroup      = 1 << 12,  // 4000
+};
+
+// CFM controls the 'hardness' of the constraint. 0=fixed, 0..1=violatable. Default=0
+// ERP controls amount of correction per tick. Usable range=0.1..0.8. Default=0.2.
+public enum ConstraintParams : int
+{
+    BT_CONSTRAINT_ERP = 1,  // this one is not used in Bullet as of 20120730
+    BT_CONSTRAINT_STOP_ERP,
+    BT_CONSTRAINT_CFM,
+    BT_CONSTRAINT_STOP_CFM,
+};
+public enum ConstraintParamAxis : int
+{
+    AXIS_LINEAR_X = 0,
+    AXIS_LINEAR_Y,
+    AXIS_LINEAR_Z,
+    AXIS_ANGULAR_X,
+    AXIS_ANGULAR_Y,
+    AXIS_ANGULAR_Z,
+    AXIS_LINEAR_ALL = 20,    // added by BulletSim so we don't have to do zillions of calls
+    AXIS_ANGULAR_ALL,
+    AXIS_ALL
+};
+
+public abstract class BSAPITemplate
+{
+// Returns the name of the underlying Bullet engine
+public abstract string BulletEngineName { get; }
+public abstract string BulletEngineVersion { get; protected set;}
+
+// Initialization and simulation
+public abstract BulletWorld Initialize(Vector3 maxPosition, ConfigurationParameters parms,
+                                                                                        int maxCollisions,  ref CollisionDesc[] collisionArray,
+                                                                                        int maxUpdates, ref EntityProperties[] updateArray
+                                            );
+
+public abstract int PhysicsStep(BulletWorld world, float timeStep, int maxSubSteps, float fixedTimeStep,
+                        out int updatedEntityCount, out int collidersCount);
+
+public abstract bool UpdateParameter(BulletWorld world, UInt32 localID, String parm, float value);
+
+public abstract void Shutdown(BulletWorld sim);
+
+public abstract bool PushUpdate(BulletBody obj);
+
+// =====================================================================================
+// Mesh, hull, shape and body creation helper routines
+public abstract BulletShape CreateMeshShape(BulletWorld world,
+                int indicesCount, int[] indices,
+                int verticesCount, float[] vertices );
+
+public abstract BulletShape CreateGImpactShape(BulletWorld world,
+                int indicesCount, int[] indices,
+                int verticesCount, float[] vertices );
+
+public abstract BulletShape CreateHullShape(BulletWorld world,
+                int hullCount, float[] hulls);
+
+public abstract BulletShape BuildHullShapeFromMesh(BulletWorld world, BulletShape meshShape, HACDParams parms);
+
+public abstract BulletShape BuildConvexHullShapeFromMesh(BulletWorld world, BulletShape meshShape);
+
+public abstract BulletShape CreateConvexHullShape(BulletWorld world,
+                int indicesCount, int[] indices,
+                int verticesCount, float[] vertices );
+
+public abstract BulletShape BuildNativeShape(BulletWorld world, ShapeData shapeData);
+
+public abstract bool IsNativeShape(BulletShape shape);
+
+public abstract void SetShapeCollisionMargin(BulletShape shape, float margin);
+
+public abstract BulletShape BuildCapsuleShape(BulletWorld world, float radius, float height, Vector3 scale);
+
+public abstract BulletShape CreateCompoundShape(BulletWorld sim, bool enableDynamicAabbTree);
+
+public abstract int GetNumberOfCompoundChildren(BulletShape cShape);
+
+public abstract void AddChildShapeToCompoundShape(BulletShape cShape, BulletShape addShape, Vector3 pos, Quaternion rot);
+
+public abstract BulletShape GetChildShapeFromCompoundShapeIndex(BulletShape cShape, int indx);
+
+public abstract BulletShape RemoveChildShapeFromCompoundShapeIndex(BulletShape cShape, int indx);
+
+public abstract void RemoveChildShapeFromCompoundShape(BulletShape cShape, BulletShape removeShape);
+
+public abstract void UpdateChildTransform(BulletShape pShape, int childIndex, Vector3 pos, Quaternion rot, bool shouldRecalculateLocalAabb);
+
+public abstract void RecalculateCompoundShapeLocalAabb(BulletShape cShape);
+
+public abstract BulletShape DuplicateCollisionShape(BulletWorld sim, BulletShape srcShape, UInt32 id);
+
+public abstract bool DeleteCollisionShape(BulletWorld world, BulletShape shape);
+
+public abstract CollisionObjectTypes GetBodyType(BulletBody obj);
+
+public abstract BulletBody CreateBodyFromShape(BulletWorld sim, BulletShape shape, UInt32 id, Vector3 pos, Quaternion rot);
+
+public abstract BulletBody CreateBodyWithDefaultMotionState(BulletShape shape, UInt32 id, Vector3 pos, Quaternion rot);
+
+public abstract BulletBody CreateGhostFromShape(BulletWorld sim, BulletShape shape, UInt32 id, Vector3 pos, Quaternion rot);
+
+public abstract void DestroyObject(BulletWorld sim, BulletBody obj);
+
+// =====================================================================================
+public abstract BulletShape CreateGroundPlaneShape(UInt32 id, float height, float collisionMargin);
+
+public abstract BulletShape CreateTerrainShape(UInt32 id, Vector3 size, float minHeight, float maxHeight, float[] heightMap,
+                                                                float scaleFactor, float collisionMargin);
+
+// =====================================================================================
+// Constraint creation and helper routines
+public abstract BulletConstraint Create6DofConstraint(BulletWorld world, BulletBody obj1, BulletBody obj2,
+                    Vector3 frame1loc, Quaternion frame1rot,
+                    Vector3 frame2loc, Quaternion frame2rot,
+                    bool useLinearReferenceFrameA, bool disableCollisionsBetweenLinkedBodies);
+
+public abstract BulletConstraint Create6DofConstraintToPoint(BulletWorld world, BulletBody obj1, BulletBody obj2,
+                    Vector3 joinPoint,
+                    bool useLinearReferenceFrameA, bool disableCollisionsBetweenLinkedBodies);
+
+public abstract BulletConstraint Create6DofConstraintFixed(BulletWorld world, BulletBody obj1,
+                    Vector3 frameInBloc, Quaternion frameInBrot,
+                    bool useLinearReferenceFrameB, bool disableCollisionsBetweenLinkedBodies);
+
+public abstract BulletConstraint Create6DofSpringConstraint(BulletWorld world, BulletBody obj1, BulletBody obj2,
+                    Vector3 frame1loc, Quaternion frame1rot,
+                    Vector3 frame2loc, Quaternion frame2rot,
+                    bool useLinearReferenceFrameA, bool disableCollisionsBetweenLinkedBodies);
+
+public abstract BulletConstraint CreateHingeConstraint(BulletWorld world, BulletBody obj1, BulletBody obj2,
+                    Vector3 pivotinA, Vector3 pivotinB,
+                    Vector3 axisInA, Vector3 axisInB,
+                    bool useLinearReferenceFrameA, bool disableCollisionsBetweenLinkedBodies);
+
+public abstract BulletConstraint CreateSliderConstraint(BulletWorld world, BulletBody obj1, BulletBody obj2,
+                    Vector3 frameInAloc, Quaternion frameInArot,
+                    Vector3 frameInBloc, Quaternion frameInBrot,
+                    bool useLinearReferenceFrameA, bool disableCollisionsBetweenLinkedBodies);
+
+public abstract BulletConstraint CreateConeTwistConstraint(BulletWorld world, BulletBody obj1, BulletBody obj2,
+                    Vector3 frameInAloc, Quaternion frameInArot,
+                    Vector3 frameInBloc, Quaternion frameInBrot,
+                    bool disableCollisionsBetweenLinkedBodies);
+
+public abstract BulletConstraint CreateGearConstraint(BulletWorld world, BulletBody obj1, BulletBody obj2,
+                    Vector3 axisInA, Vector3 axisInB,
+                    float ratio, bool disableCollisionsBetweenLinkedBodies);
+
+public abstract BulletConstraint CreatePoint2PointConstraint(BulletWorld world, BulletBody obj1, BulletBody obj2,
+                    Vector3 pivotInA, Vector3 pivotInB,
+                    bool disableCollisionsBetweenLinkedBodies);
+
+public abstract void SetConstraintEnable(BulletConstraint constrain, float numericTrueFalse);
+
+public abstract void SetConstraintNumSolverIterations(BulletConstraint constrain, float iterations);
+
+public abstract bool SetFrames(BulletConstraint constrain,
+                Vector3 frameA, Quaternion frameArot, Vector3 frameB, Quaternion frameBrot);
+
+public abstract bool SetLinearLimits(BulletConstraint constrain, Vector3 low, Vector3 hi);
+
+public abstract bool SetAngularLimits(BulletConstraint constrain, Vector3 low, Vector3 hi);
+
+public abstract bool UseFrameOffset(BulletConstraint constrain, float enable);
+
+public abstract bool TranslationalLimitMotor(BulletConstraint constrain, float enable, float targetVel, float maxMotorForce);
+
+public abstract bool SetBreakingImpulseThreshold(BulletConstraint constrain, float threshold);
+
+public const int HINGE_NOT_SPECIFIED = -1;
+public abstract bool HingeSetLimits(BulletConstraint constrain, float low, float high, float softness, float bias, float relaxation);
+
+public abstract bool SpringEnable(BulletConstraint constrain, int index, float numericTrueFalse);
+
+public const int SPRING_NOT_SPECIFIED = -1;
+public abstract bool SpringSetEquilibriumPoint(BulletConstraint constrain, int index, float equilibriumPoint);
+
+public abstract bool SpringSetStiffness(BulletConstraint constrain, int index, float stiffnesss);
+
+public abstract bool SpringSetDamping(BulletConstraint constrain, int index, float damping);
+
+public const int SLIDER_LOWER_LIMIT = 0;
+public const int SLIDER_UPPER_LIMIT = 1;
+public const int SLIDER_LINEAR = 2;
+public const int SLIDER_ANGULAR = 3;
+public abstract bool SliderSetLimits(BulletConstraint constrain, int lowerUpper, int linAng, float val);
+
+public const int SLIDER_SET_SOFTNESS = 4;
+public const int SLIDER_SET_RESTITUTION = 5;
+public const int SLIDER_SET_DAMPING = 6;
+public const int SLIDER_SET_DIRECTION = 7;
+public const int SLIDER_SET_LIMIT = 8;
+public const int SLIDER_SET_ORTHO = 9;
+public abstract bool SliderSet(BulletConstraint constrain, int softRestDamp, int dirLimOrtho, int linAng, float val);
+
+public abstract bool SliderMotorEnable(BulletConstraint constrain, int linAng, float numericTrueFalse);
+
+public const int SLIDER_MOTOR_VELOCITY = 10;
+public const int SLIDER_MAX_MOTOR_FORCE = 11;
+public abstract bool SliderMotor(BulletConstraint constrain, int forceVel, int linAng, float val);
+
+public abstract bool CalculateTransforms(BulletConstraint constrain);
+
+public abstract bool SetConstraintParam(BulletConstraint constrain, ConstraintParams paramIndex, float value, ConstraintParamAxis axis);
+
+public abstract bool DestroyConstraint(BulletWorld world, BulletConstraint constrain);
+
+// =====================================================================================
+// btCollisionWorld entries
+public abstract void UpdateSingleAabb(BulletWorld world, BulletBody obj);
+
+public abstract void UpdateAabbs(BulletWorld world);
+
+public abstract bool GetForceUpdateAllAabbs(BulletWorld world);
+
+public abstract void SetForceUpdateAllAabbs(BulletWorld world, bool force);
+
+// =====================================================================================
+// btDynamicsWorld entries
+// public abstract bool AddObjectToWorld(BulletWorld world, BulletBody obj, Vector3 pos, Quaternion rot);
+public abstract bool AddObjectToWorld(BulletWorld world, BulletBody obj);
+
+public abstract bool RemoveObjectFromWorld(BulletWorld world, BulletBody obj);
+
+public abstract bool ClearCollisionProxyCache(BulletWorld world, BulletBody obj);
+
+public abstract bool AddConstraintToWorld(BulletWorld world, BulletConstraint constrain, bool disableCollisionsBetweenLinkedObjects);
+
+public abstract bool RemoveConstraintFromWorld(BulletWorld world, BulletConstraint constrain);
+// =====================================================================================
+// btCollisionObject entries
+public abstract Vector3 GetAnisotripicFriction(BulletConstraint constrain);
+
+public abstract Vector3 SetAnisotripicFriction(BulletConstraint constrain, Vector3 frict);
+
+public abstract bool HasAnisotripicFriction(BulletConstraint constrain);
+
+public abstract void SetContactProcessingThreshold(BulletBody obj, float val);
+
+public abstract float GetContactProcessingThreshold(BulletBody obj);
+
+public abstract bool IsStaticObject(BulletBody obj);
+
+public abstract bool IsKinematicObject(BulletBody obj);
+
+public abstract bool IsStaticOrKinematicObject(BulletBody obj);
+
+public abstract bool HasContactResponse(BulletBody obj);
+
+public abstract void SetCollisionShape(BulletWorld sim, BulletBody obj, BulletShape shape);
+
+public abstract BulletShape GetCollisionShape(BulletBody obj);
+
+public abstract int GetActivationState(BulletBody obj);
+
+public abstract void SetActivationState(BulletBody obj, int state);
+
+public abstract void SetDeactivationTime(BulletBody obj, float dtime);
+
+public abstract float GetDeactivationTime(BulletBody obj);
+
+public abstract void ForceActivationState(BulletBody obj, ActivationState state);
+
+public abstract void Activate(BulletBody obj, bool forceActivation);
+
+public abstract bool IsActive(BulletBody obj);
+
+public abstract void SetRestitution(BulletBody obj, float val);
+
+public abstract float GetRestitution(BulletBody obj);
+
+public abstract void SetFriction(BulletBody obj, float val);
+
+public abstract float GetFriction(BulletBody obj);
+
+public abstract Vector3 GetPosition(BulletBody obj);
+
+public abstract Quaternion GetOrientation(BulletBody obj);
+
+public abstract void SetTranslation(BulletBody obj, Vector3 position, Quaternion rotation);
+
+// public abstract IntPtr GetBroadphaseHandle(BulletBody obj);
+
+// public abstract void SetBroadphaseHandle(BulletBody obj, IntPtr handle);
+
+public abstract void SetInterpolationLinearVelocity(BulletBody obj, Vector3 vel);
+
+public abstract void SetInterpolationAngularVelocity(BulletBody obj, Vector3 vel);
+
+public abstract void SetInterpolationVelocity(BulletBody obj, Vector3 linearVel, Vector3 angularVel);
+
+public abstract float GetHitFraction(BulletBody obj);
+
+public abstract void SetHitFraction(BulletBody obj, float val);
+
+public abstract CollisionFlags GetCollisionFlags(BulletBody obj);
+
+public abstract CollisionFlags SetCollisionFlags(BulletBody obj, CollisionFlags flags);
+
+public abstract CollisionFlags AddToCollisionFlags(BulletBody obj, CollisionFlags flags);
+
+public abstract CollisionFlags RemoveFromCollisionFlags(BulletBody obj, CollisionFlags flags);
+
+public abstract float GetCcdMotionThreshold(BulletBody obj);
+
+public abstract void SetCcdMotionThreshold(BulletBody obj, float val);
+
+public abstract float GetCcdSweptSphereRadius(BulletBody obj);
+
+public abstract void SetCcdSweptSphereRadius(BulletBody obj, float val);
+
+public abstract IntPtr GetUserPointer(BulletBody obj);
+
+public abstract void SetUserPointer(BulletBody obj, IntPtr val);
+
+// =====================================================================================
+// btRigidBody entries
+public abstract void ApplyGravity(BulletBody obj);
+
+public abstract void SetGravity(BulletBody obj, Vector3 val);
+
+public abstract Vector3 GetGravity(BulletBody obj);
+
+public abstract void SetDamping(BulletBody obj, float lin_damping, float ang_damping);
+
+public abstract void SetLinearDamping(BulletBody obj, float lin_damping);
+
+public abstract void SetAngularDamping(BulletBody obj, float ang_damping);
+
+public abstract float GetLinearDamping(BulletBody obj);
+
+public abstract float GetAngularDamping(BulletBody obj);
+
+public abstract float GetLinearSleepingThreshold(BulletBody obj);
+
+public abstract void ApplyDamping(BulletBody obj, float timeStep);
+
+public abstract void SetMassProps(BulletBody obj, float mass, Vector3 inertia);
+
+public abstract Vector3 GetLinearFactor(BulletBody obj);
+
+public abstract void SetLinearFactor(BulletBody obj, Vector3 factor);
+
+public abstract void SetCenterOfMassByPosRot(BulletBody obj, Vector3 pos, Quaternion rot);
+
+// Add a force to the object as if its mass is one.
+public abstract void ApplyCentralForce(BulletBody obj, Vector3 force);
+
+// Set the force being applied to the object as if its mass is one.
+public abstract void SetObjectForce(BulletBody obj, Vector3 force);
+
+public abstract Vector3 GetTotalForce(BulletBody obj);
+
+public abstract Vector3 GetTotalTorque(BulletBody obj);
+
+public abstract Vector3 GetInvInertiaDiagLocal(BulletBody obj);
+
+public abstract void SetInvInertiaDiagLocal(BulletBody obj, Vector3 inert);
+
+public abstract void SetSleepingThresholds(BulletBody obj, float lin_threshold, float ang_threshold);
+
+public abstract void ApplyTorque(BulletBody obj, Vector3 torque);
+
+// Apply force at the given point. Will add torque to the object.
+public abstract void ApplyForce(BulletBody obj, Vector3 force, Vector3 pos);
+
+// Apply impulse to the object. Same as "ApplycentralForce" but force scaled by object's mass.
+public abstract void ApplyCentralImpulse(BulletBody obj, Vector3 imp);
+
+// Apply impulse to the object's torque. Force is scaled by object's mass.
+public abstract void ApplyTorqueImpulse(BulletBody obj, Vector3 imp);
+
+// Apply impulse at the point given. For is scaled by object's mass and effects both linear and angular forces.
+public abstract void ApplyImpulse(BulletBody obj, Vector3 imp, Vector3 pos);
+
+public abstract void ClearForces(BulletBody obj);
+
+public abstract void ClearAllForces(BulletBody obj);
+
+public abstract void UpdateInertiaTensor(BulletBody obj);
+
+public abstract Vector3 GetLinearVelocity(BulletBody obj);
+
+public abstract Vector3 GetAngularVelocity(BulletBody obj);
+
+public abstract void SetLinearVelocity(BulletBody obj, Vector3 val);
+
+public abstract void SetAngularVelocity(BulletBody obj, Vector3 angularVelocity);
+
+public abstract Vector3 GetVelocityInLocalPoint(BulletBody obj, Vector3 pos);
+
+public abstract void Translate(BulletBody obj, Vector3 trans);
+
+public abstract void UpdateDeactivation(BulletBody obj, float timeStep);
+
+public abstract bool WantsSleeping(BulletBody obj);
+
+public abstract void SetAngularFactor(BulletBody obj, float factor);
+
+public abstract void SetAngularFactorV(BulletBody obj, Vector3 factor);
+
+public abstract Vector3 GetAngularFactor(BulletBody obj);
+
+public abstract bool IsInWorld(BulletWorld world, BulletBody obj);
+
+public abstract void AddConstraintRef(BulletBody obj, BulletConstraint constrain);
+
+public abstract void RemoveConstraintRef(BulletBody obj, BulletConstraint constrain);
+
+public abstract BulletConstraint GetConstraintRef(BulletBody obj, int index);
+
+public abstract int GetNumConstraintRefs(BulletBody obj);
+
+public abstract bool SetCollisionGroupMask(BulletBody body, UInt32 filter, UInt32 mask);
+
+// =====================================================================================
+// btCollisionShape entries
+
+public abstract float GetAngularMotionDisc(BulletShape shape);
+
+public abstract float GetContactBreakingThreshold(BulletShape shape, float defaultFactor);
+
+public abstract bool IsPolyhedral(BulletShape shape);
+
+public abstract bool IsConvex2d(BulletShape shape);
+
+public abstract bool IsConvex(BulletShape shape);
+
+public abstract bool IsNonMoving(BulletShape shape);
+
+public abstract bool IsConcave(BulletShape shape);
+
+public abstract bool IsCompound(BulletShape shape);
+
+public abstract bool IsSoftBody(BulletShape shape);
+
+public abstract bool IsInfinite(BulletShape shape);
+
+public abstract void SetLocalScaling(BulletShape shape, Vector3 scale);
+
+public abstract Vector3 GetLocalScaling(BulletShape shape);
+
+public abstract Vector3 CalculateLocalInertia(BulletShape shape, float mass);
+
+public abstract int GetShapeType(BulletShape shape);
+
+public abstract void SetMargin(BulletShape shape, float val);
+
+public abstract float GetMargin(BulletShape shape);
+
+// =====================================================================================
+// Debugging
+public virtual void DumpRigidBody(BulletWorld sim, BulletBody collisionObject) { }
+
+public virtual void DumpCollisionShape(BulletWorld sim, BulletShape collisionShape) { }
+
+public virtual void DumpConstraint(BulletWorld sim, BulletConstraint constrain) { }
+
+public virtual void DumpActivationInfo(BulletWorld sim) { }
+
+public virtual void DumpAllInfo(BulletWorld sim) { }
+
+public virtual void DumpPhysicsStatistics(BulletWorld sim) { }
+
+public virtual void ResetBroadphasePool(BulletWorld sim) { }
+
+public virtual void ResetConstraintSolver(BulletWorld sim) { }
+
+};
+}
diff --git a/OpenSim/Region/PhysicsModules/BulletS/BSCharacter.cs b/OpenSim/Region/PhysicsModules/BulletS/BSCharacter.cs
new file mode 100644
index 0000000..83fc3a6
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/BSCharacter.cs
@@ -0,0 +1,813 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyrightD
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+using System;
+using System.Collections.Generic;
+using System.Reflection;
+using log4net;
+using OMV = OpenMetaverse;
+using OpenSim.Framework;
+using OpenSim.Region.PhysicsModules.SharedBase;
+
+namespace OpenSim.Region.PhysicsModule.BulletS
+{
+public sealed class BSCharacter : BSPhysObject
+{
+    private static readonly ILog m_log = LogManager.GetLogger(MethodBase.GetCurrentMethod().DeclaringType);
+    private static readonly string LogHeader = "[BULLETS CHAR]";
+
+    // private bool _stopped;
+    private OMV.Vector3 _size;
+    private bool _grabbed;
+    private bool _selected;
+    private float _mass;
+    private float _avatarVolume;
+    private float _collisionScore;
+    private OMV.Vector3 _acceleration;
+    private int _physicsActorType;
+    private bool _isPhysical;
+    private bool _flying;
+    private bool _setAlwaysRun;
+    private bool _throttleUpdates;
+    private bool _floatOnWater;
+    private OMV.Vector3 _rotationalVelocity;
+    private bool _kinematic;
+    private float _buoyancy;
+
+    private BSActorAvatarMove m_moveActor;
+    private const string AvatarMoveActorName = "BSCharacter.AvatarMove";
+
+    private OMV.Vector3 _PIDTarget;
+    private float _PIDTau;
+
+//        public override OMV.Vector3 RawVelocity 
+//        { get { return base.RawVelocity; } 
+//            set { 
+//                if (value != base.RawVelocity)
+//                    Util.PrintCallStack();
+//                Console.WriteLine("Set rawvel to {0}", value);
+//                base.RawVelocity = value; }
+//        }
+
+    // Avatars are always complete (in the physics engine sense)
+    public override bool IsIncomplete { get { return false; } }
+
+    public BSCharacter(
+            uint localID, String avName, BSScene parent_scene, OMV.Vector3 pos, OMV.Vector3 vel, OMV.Vector3 size, bool isFlying)
+
+            : base(parent_scene, localID, avName, "BSCharacter")
+    {
+        _physicsActorType = (int)ActorTypes.Agent;
+        RawPosition = pos;        
+
+        _flying = isFlying;
+        RawOrientation = OMV.Quaternion.Identity;
+        RawVelocity = vel;
+        _buoyancy = ComputeBuoyancyFromFlying(isFlying);
+        Friction = BSParam.AvatarStandingFriction;
+        Density = BSParam.AvatarDensity;
+
+        // Old versions of ScenePresence passed only the height. If width and/or depth are zero,
+        //     replace with the default values.
+        _size = size;
+        if (_size.X == 0f) _size.X = BSParam.AvatarCapsuleDepth;
+        if (_size.Y == 0f) _size.Y = BSParam.AvatarCapsuleWidth;
+
+        // The dimensions of the physical capsule are kept in the scale.
+        // Physics creates a unit capsule which is scaled by the physics engine.
+        Scale = ComputeAvatarScale(_size);
+        // set _avatarVolume and _mass based on capsule size, _density and Scale
+        ComputeAvatarVolumeAndMass();
+
+        DetailLog(
+            "{0},BSCharacter.create,call,size={1},scale={2},density={3},volume={4},mass={5},pos={6},vel={7}",
+            LocalID, _size, Scale, Density, _avatarVolume, RawMass, pos, vel);
+
+        // do actual creation in taint time
+        PhysScene.TaintedObject(LocalID, "BSCharacter.create", delegate()
+        {
+            DetailLog("{0},BSCharacter.create,taint", LocalID);
+
+            // New body and shape into PhysBody and PhysShape
+            PhysScene.Shapes.GetBodyAndShape(true, PhysScene.World, this);
+
+            // The avatar's movement is controlled by this motor that speeds up and slows down
+            //    the avatar seeking to reach the motor's target speed.
+            // This motor runs as a prestep action for the avatar so it will keep the avatar
+            //    standing as well as moving. Destruction of the avatar will destroy the pre-step action.
+            m_moveActor = new BSActorAvatarMove(PhysScene, this, AvatarMoveActorName);
+            PhysicalActors.Add(AvatarMoveActorName, m_moveActor);
+
+            SetPhysicalProperties();
+
+            IsInitialized = true;
+        });
+        return;
+    }
+
+    // called when this character is being destroyed and the resources should be released
+    public override void Destroy()
+    {
+        IsInitialized = false;
+
+        base.Destroy();
+
+        DetailLog("{0},BSCharacter.Destroy", LocalID);
+        PhysScene.TaintedObject(LocalID, "BSCharacter.destroy", delegate()
+        {
+            PhysScene.Shapes.DereferenceBody(PhysBody, null /* bodyCallback */);
+            PhysBody.Clear();
+            PhysShape.Dereference(PhysScene);
+            PhysShape = new BSShapeNull();
+        });
+    }
+
+    private void SetPhysicalProperties()
+    {
+        PhysScene.PE.RemoveObjectFromWorld(PhysScene.World, PhysBody);
+
+        ForcePosition = RawPosition;
+
+        // Set the velocity
+        if (m_moveActor != null)
+            m_moveActor.SetVelocityAndTarget(RawVelocity, RawVelocity, false);
+
+        ForceVelocity = RawVelocity;
+        TargetVelocity = RawVelocity;
+
+        // This will enable or disable the flying buoyancy of the avatar.
+        // Needs to be reset especially when an avatar is recreated after crossing a region boundry.
+        Flying = _flying;
+
+        PhysScene.PE.SetRestitution(PhysBody, BSParam.AvatarRestitution);
+        PhysScene.PE.SetMargin(PhysShape.physShapeInfo, PhysScene.Params.collisionMargin);
+        PhysScene.PE.SetLocalScaling(PhysShape.physShapeInfo, Scale);
+        PhysScene.PE.SetContactProcessingThreshold(PhysBody, BSParam.ContactProcessingThreshold);
+        if (BSParam.CcdMotionThreshold > 0f)
+        {
+            PhysScene.PE.SetCcdMotionThreshold(PhysBody, BSParam.CcdMotionThreshold);
+            PhysScene.PE.SetCcdSweptSphereRadius(PhysBody, BSParam.CcdSweptSphereRadius);
+        }
+
+        UpdatePhysicalMassProperties(RawMass, false);
+
+        // Make so capsule does not fall over
+        PhysScene.PE.SetAngularFactorV(PhysBody, OMV.Vector3.Zero);
+
+        // The avatar mover sets some parameters.
+        PhysicalActors.Refresh();
+
+        PhysScene.PE.AddToCollisionFlags(PhysBody, CollisionFlags.CF_CHARACTER_OBJECT);
+
+        PhysScene.PE.AddObjectToWorld(PhysScene.World, PhysBody);
+
+        // PhysicsScene.PE.ForceActivationState(PhysBody, ActivationState.ACTIVE_TAG);
+        PhysScene.PE.ForceActivationState(PhysBody, ActivationState.DISABLE_DEACTIVATION);
+        PhysScene.PE.UpdateSingleAabb(PhysScene.World, PhysBody);
+
+        // Do this after the object has been added to the world
+        if (BSParam.AvatarToAvatarCollisionsByDefault)
+            PhysBody.collisionType = CollisionType.Avatar;
+        else
+            PhysBody.collisionType = CollisionType.PhantomToOthersAvatar;
+
+        PhysBody.ApplyCollisionMask(PhysScene);
+    }
+
+    public override void RequestPhysicsterseUpdate()
+    {
+        base.RequestPhysicsterseUpdate();
+    }
+
+    // No one calls this method so I don't know what it could possibly mean
+    public override bool Stopped { get { return false; } }
+
+    public override OMV.Vector3 Size {
+        get
+        {
+            // Avatar capsule size is kept in the scale parameter.
+            return _size;
+        }
+
+        set {
+            // This is how much the avatar size is changing. Positive means getting bigger.
+            // The avatar altitude must be adjusted for this change.
+            float heightChange = value.Z - _size.Z;
+
+            _size = value;
+            // Old versions of ScenePresence passed only the height. If width and/or depth are zero,
+            //     replace with the default values.
+            if (_size.X == 0f) _size.X = BSParam.AvatarCapsuleDepth;
+            if (_size.Y == 0f) _size.Y = BSParam.AvatarCapsuleWidth;
+
+            Scale = ComputeAvatarScale(_size);
+            ComputeAvatarVolumeAndMass();
+            DetailLog("{0},BSCharacter.setSize,call,size={1},scale={2},density={3},volume={4},mass={5}",
+                            LocalID, _size, Scale, Density, _avatarVolume, RawMass);
+
+            PhysScene.TaintedObject(LocalID, "BSCharacter.setSize", delegate()
+            {
+                if (PhysBody.HasPhysicalBody && PhysShape.physShapeInfo.HasPhysicalShape)
+                {
+                    PhysScene.PE.SetLocalScaling(PhysShape.physShapeInfo, Scale);
+                    UpdatePhysicalMassProperties(RawMass, true);
+
+                    // Adjust the avatar's position to account for the increase/decrease in size
+                    ForcePosition = new OMV.Vector3(RawPosition.X, RawPosition.Y, RawPosition.Z + heightChange / 2f);
+
+                    // Make sure this change appears as a property update event
+                    PhysScene.PE.PushUpdate(PhysBody);
+                }
+            });
+
+        }
+    }
+
+    public override PrimitiveBaseShape Shape
+    {
+        set { BaseShape = value; }
+    }
+
+    public override bool Grabbed {
+        set { _grabbed = value; }
+    }
+    public override bool Selected {
+        set { _selected = value; }
+    }
+    public override bool IsSelected
+    {
+        get { return _selected; }
+    }
+    public override void CrossingFailure() { return; }
+    public override void link(PhysicsActor obj) { return; }
+    public override void delink() { return; }
+
+    // Set motion values to zero.
+    // Do it to the properties so the values get set in the physics engine.
+    // Push the setting of the values to the viewer.
+    // Called at taint time!
+    public override void ZeroMotion(bool inTaintTime)
+    {
+        RawVelocity = OMV.Vector3.Zero;
+        _acceleration = OMV.Vector3.Zero;
+        _rotationalVelocity = OMV.Vector3.Zero;
+
+        // Zero some other properties directly into the physics engine
+        PhysScene.TaintedObject(inTaintTime, LocalID, "BSCharacter.ZeroMotion", delegate()
+        {
+            if (PhysBody.HasPhysicalBody)
+                PhysScene.PE.ClearAllForces(PhysBody);
+        });
+    }
+
+    public override void ZeroAngularMotion(bool inTaintTime)
+    {
+        _rotationalVelocity = OMV.Vector3.Zero;
+
+        PhysScene.TaintedObject(inTaintTime, LocalID, "BSCharacter.ZeroMotion", delegate()
+        {
+            if (PhysBody.HasPhysicalBody)
+            {
+                PhysScene.PE.SetInterpolationAngularVelocity(PhysBody, OMV.Vector3.Zero);
+                PhysScene.PE.SetAngularVelocity(PhysBody, OMV.Vector3.Zero);
+                // The next also get rid of applied linear force but the linear velocity is untouched.
+                PhysScene.PE.ClearForces(PhysBody);
+            }
+        });
+    }
+
+
+    public override void LockAngularMotion(OMV.Vector3 axis) { return; }
+
+    public override OMV.Vector3 Position {
+        get {
+            // Don't refetch the position because this function is called a zillion times
+            // RawPosition = PhysicsScene.PE.GetObjectPosition(Scene.World, LocalID);
+            return RawPosition;
+        }
+        set {
+            RawPosition = value;
+
+            PhysScene.TaintedObject(LocalID, "BSCharacter.setPosition", delegate()
+            {
+                DetailLog("{0},BSCharacter.SetPosition,taint,pos={1},orient={2}", LocalID, RawPosition, RawOrientation);
+                PositionSanityCheck();
+                ForcePosition = RawPosition;
+            });
+        }
+    }
+    public override OMV.Vector3 ForcePosition {
+        get {
+            RawPosition = PhysScene.PE.GetPosition(PhysBody);
+            return RawPosition;
+        }
+        set {
+            RawPosition = value;
+            if (PhysBody.HasPhysicalBody)
+            {
+                PhysScene.PE.SetTranslation(PhysBody, RawPosition, RawOrientation);
+            }
+        }
+    }
+
+
+    // Check that the current position is sane and, if not, modify the position to make it so.
+    // Check for being below terrain or on water.
+    // Returns 'true' of the position was made sane by some action.
+    private bool PositionSanityCheck()
+    {
+        bool ret = false;
+
+        // TODO: check for out of bounds
+        if (!PhysScene.TerrainManager.IsWithinKnownTerrain(RawPosition))
+        {
+            // The character is out of the known/simulated area.
+            // Force the avatar position to be within known. ScenePresence will use the position
+            //    plus the velocity to decide if the avatar is moving out of the region.
+            RawPosition = PhysScene.TerrainManager.ClampPositionIntoKnownTerrain(RawPosition);
+            DetailLog("{0},BSCharacter.PositionSanityCheck,notWithinKnownTerrain,clampedPos={1}", LocalID, RawPosition);
+            return true;
+        }
+
+        // If below the ground, move the avatar up
+        float terrainHeight = PhysScene.TerrainManager.GetTerrainHeightAtXYZ(RawPosition);
+        if (Position.Z < terrainHeight)
+        {
+            DetailLog("{0},BSCharacter.PositionSanityCheck,adjustForUnderGround,pos={1},terrain={2}", LocalID, RawPosition, terrainHeight);
+            RawPosition = new OMV.Vector3(RawPosition.X, RawPosition.Y, terrainHeight + BSParam.AvatarBelowGroundUpCorrectionMeters);
+            ret = true;
+        }
+        if ((CurrentCollisionFlags & CollisionFlags.BS_FLOATS_ON_WATER) != 0)
+        {
+            float waterHeight = PhysScene.TerrainManager.GetWaterLevelAtXYZ(RawPosition);
+            if (Position.Z < waterHeight)
+            {
+                RawPosition = new OMV.Vector3(RawPosition.X, RawPosition.Y, waterHeight);
+                ret = true;
+            }
+        }
+
+        return ret;
+    }
+
+    // A version of the sanity check that also makes sure a new position value is
+    //    pushed back to the physics engine. This routine would be used by anyone
+    //    who is not already pushing the value.
+    private bool PositionSanityCheck(bool inTaintTime)
+    {
+        bool ret = false;
+        if (PositionSanityCheck())
+        {
+            // The new position value must be pushed into the physics engine but we can't
+            //    just assign to "Position" because of potential call loops.
+            PhysScene.TaintedObject(inTaintTime, LocalID, "BSCharacter.PositionSanityCheck", delegate()
+            {
+                DetailLog("{0},BSCharacter.PositionSanityCheck,taint,pos={1},orient={2}", LocalID, RawPosition, RawOrientation);
+                ForcePosition = RawPosition;
+            });
+            ret = true;
+        }
+        return ret;
+    }
+
+    public override float Mass { get { return _mass; } }
+
+    // used when we only want this prim's mass and not the linkset thing
+    public override float RawMass {
+        get {return _mass; }
+    }
+    public override void UpdatePhysicalMassProperties(float physMass, bool inWorld)
+    {
+        OMV.Vector3 localInertia = PhysScene.PE.CalculateLocalInertia(PhysShape.physShapeInfo, physMass);
+        PhysScene.PE.SetMassProps(PhysBody, physMass, localInertia);
+    }
+
+    public override OMV.Vector3 Force {
+        get { return RawForce; }
+        set {
+            RawForce = value;
+            // m_log.DebugFormat("{0}: Force = {1}", LogHeader, _force);
+            PhysScene.TaintedObject(LocalID, "BSCharacter.SetForce", delegate()
+            {
+                DetailLog("{0},BSCharacter.setForce,taint,force={1}", LocalID, RawForce);
+                if (PhysBody.HasPhysicalBody)
+                    PhysScene.PE.SetObjectForce(PhysBody, RawForce);
+            });
+        }
+    }
+
+    // Avatars don't do vehicles
+    public override int VehicleType { get { return (int)Vehicle.TYPE_NONE; } set { return; } }
+    public override void VehicleFloatParam(int param, float value) { }
+    public override void VehicleVectorParam(int param, OMV.Vector3 value) {}
+    public override void VehicleRotationParam(int param, OMV.Quaternion rotation) { }
+    public override void VehicleFlags(int param, bool remove) { }
+
+    // Allows the detection of collisions with inherently non-physical prims. see llVolumeDetect for more
+    public override void SetVolumeDetect(int param) { return; }
+    public override bool IsVolumeDetect { get { return false; } }
+
+    public override OMV.Vector3 GeometricCenter { get { return OMV.Vector3.Zero; } }
+    public override OMV.Vector3 CenterOfMass { get { return OMV.Vector3.Zero; } }
+
+    // Sets the target in the motor. This starts the changing of the avatar's velocity.
+    public override OMV.Vector3 TargetVelocity
+    {
+        get
+        {
+            return base.m_targetVelocity;
+        }
+        set
+        {
+            DetailLog("{0},BSCharacter.setTargetVelocity,call,vel={1}", LocalID, value);
+            m_targetVelocity = value;
+            OMV.Vector3 targetVel = value;
+            if (_setAlwaysRun && !_flying)
+                targetVel *= new OMV.Vector3(BSParam.AvatarAlwaysRunFactor, BSParam.AvatarAlwaysRunFactor, 1f);
+
+            if (m_moveActor != null)
+                m_moveActor.SetVelocityAndTarget(RawVelocity, targetVel, false /* inTaintTime */);
+        }
+    }
+    // Directly setting velocity means this is what the user really wants now.
+    public override OMV.Vector3 Velocity {
+        get { return RawVelocity; }
+        set {
+            RawVelocity = value;
+                OMV.Vector3 vel = RawVelocity;
+
+            DetailLog("{0}: set Velocity = {1}", LocalID, value);
+
+            PhysScene.TaintedObject(LocalID, "BSCharacter.setVelocity", delegate()
+            {
+                if (m_moveActor != null)
+                    m_moveActor.SetVelocityAndTarget(vel, vel, true /* inTaintTime */);
+
+                DetailLog("{0},BSCharacter.setVelocity,taint,vel={1}", LocalID, vel);
+                ForceVelocity = vel;
+            });
+        }
+    }
+
+    public override OMV.Vector3 ForceVelocity {
+        get { return RawVelocity; }
+        set {
+            PhysScene.AssertInTaintTime("BSCharacter.ForceVelocity");
+//                Util.PrintCallStack();
+            DetailLog("{0}: set ForceVelocity = {1}", LocalID, value);
+
+            RawVelocity = value;
+            PhysScene.PE.SetLinearVelocity(PhysBody, RawVelocity);
+            PhysScene.PE.Activate(PhysBody, true);
+        }
+    }
+
+    public override OMV.Vector3 Torque {
+        get { return RawTorque; }
+        set { RawTorque = value;
+        }
+    }
+
+    public override float CollisionScore {
+        get { return _collisionScore; }
+        set { _collisionScore = value;
+        }
+    }
+    public override OMV.Vector3 Acceleration {
+        get { return _acceleration; }
+        set { _acceleration = value; }
+    }
+    public override OMV.Quaternion Orientation {
+        get { return RawOrientation; }
+        set {
+            // Orientation is set zillions of times when an avatar is walking. It's like
+            //      the viewer doesn't trust us.
+            if (RawOrientation != value)
+            {
+                RawOrientation = value;
+                PhysScene.TaintedObject(LocalID, "BSCharacter.setOrientation", delegate()
+                {
+                    // Bullet assumes we know what we are doing when forcing orientation
+                    //    so it lets us go against all the rules and just compensates for them later.
+                    // This forces rotation to be only around the Z axis and doesn't change any of the other axis.
+                    // This keeps us from flipping the capsule over which the veiwer does not understand.
+                    float oRoll, oPitch, oYaw;
+                    RawOrientation.GetEulerAngles(out oRoll, out oPitch, out oYaw);
+                    OMV.Quaternion trimmedOrientation = OMV.Quaternion.CreateFromEulers(0f, 0f, oYaw);
+                    // DetailLog("{0},BSCharacter.setOrientation,taint,val={1},valDir={2},conv={3},convDir={4}",
+                    //                 LocalID, RawOrientation, OMV.Vector3.UnitX * RawOrientation,
+                    //                 trimmedOrientation, OMV.Vector3.UnitX * trimmedOrientation);
+                    ForceOrientation = trimmedOrientation;
+                });
+            }
+        }
+    }
+    // Go directly to Bullet to get/set the value.
+    public override OMV.Quaternion ForceOrientation
+    {
+        get
+        {
+            RawOrientation = PhysScene.PE.GetOrientation(PhysBody);
+            return RawOrientation;
+        }
+        set
+        {
+            RawOrientation = value;
+            if (PhysBody.HasPhysicalBody)
+            {
+                // RawPosition = PhysicsScene.PE.GetPosition(BSBody);
+                PhysScene.PE.SetTranslation(PhysBody, RawPosition, RawOrientation);
+            }
+        }
+    }
+    public override int PhysicsActorType {
+        get { return _physicsActorType; }
+        set { _physicsActorType = value;
+        }
+    }
+    public override bool IsPhysical {
+        get { return _isPhysical; }
+        set { _isPhysical = value;
+        }
+    }
+    public override bool IsSolid {
+        get { return true; }
+    }
+    public override bool IsStatic {
+        get { return false; }
+    }
+    public override bool IsPhysicallyActive {
+        get { return true; }
+    }
+    public override bool Flying {
+        get { return _flying; }
+        set {
+            _flying = value;
+
+            // simulate flying by changing the effect of gravity
+            Buoyancy = ComputeBuoyancyFromFlying(_flying);
+        }
+    }
+    // Flying is implimented by changing the avatar's buoyancy.
+    // Would this be done better with a vehicle type?
+    private float ComputeBuoyancyFromFlying(bool ifFlying) {
+        return ifFlying ? 1f : 0f;
+    }
+    public override bool
+        SetAlwaysRun {
+        get { return _setAlwaysRun; }
+        set { _setAlwaysRun = value; }
+    }
+    public override bool ThrottleUpdates {
+        get { return _throttleUpdates; }
+        set { _throttleUpdates = value; }
+    }
+    public override bool FloatOnWater {
+        set {
+            _floatOnWater = value;
+            PhysScene.TaintedObject(LocalID, "BSCharacter.setFloatOnWater", delegate()
+            {
+                if (PhysBody.HasPhysicalBody)
+                {
+                    if (_floatOnWater)
+                        CurrentCollisionFlags = PhysScene.PE.AddToCollisionFlags(PhysBody, CollisionFlags.BS_FLOATS_ON_WATER);
+                    else
+                        CurrentCollisionFlags = PhysScene.PE.RemoveFromCollisionFlags(PhysBody, CollisionFlags.BS_FLOATS_ON_WATER);
+                }
+            });
+        }
+    }
+    public override OMV.Vector3 RotationalVelocity {
+        get { return _rotationalVelocity; }
+        set { _rotationalVelocity = value; }
+    }
+    public override OMV.Vector3 ForceRotationalVelocity {
+        get { return _rotationalVelocity; }
+        set { _rotationalVelocity = value; }
+    }
+    public override bool Kinematic {
+        get { return _kinematic; }
+        set { _kinematic = value; }
+    }
+    // neg=fall quickly, 0=1g, 1=0g, pos=float up
+    public override float Buoyancy {
+        get { return _buoyancy; }
+        set { _buoyancy = value;
+            PhysScene.TaintedObject(LocalID, "BSCharacter.setBuoyancy", delegate()
+            {
+                DetailLog("{0},BSCharacter.setBuoyancy,taint,buoy={1}", LocalID, _buoyancy);
+                ForceBuoyancy = _buoyancy;
+            });
+        }
+    }
+    public override float ForceBuoyancy {
+        get { return _buoyancy; }
+        set {
+            PhysScene.AssertInTaintTime("BSCharacter.ForceBuoyancy");
+
+            _buoyancy = value;
+            DetailLog("{0},BSCharacter.setForceBuoyancy,taint,buoy={1}", LocalID, _buoyancy);
+            // Buoyancy is faked by changing the gravity applied to the object
+            float  grav = BSParam.Gravity * (1f - _buoyancy);
+            Gravity = new OMV.Vector3(0f, 0f, grav);
+            if (PhysBody.HasPhysicalBody)
+                PhysScene.PE.SetGravity(PhysBody, Gravity);
+        }
+    }
+
+    // Used for MoveTo
+    public override OMV.Vector3 PIDTarget {
+        set { _PIDTarget = value; }
+    }
+
+    public override bool PIDActive { get; set; }
+
+    public override float PIDTau {
+        set { _PIDTau = value; }
+    }
+
+    public override void AddForce(OMV.Vector3 force, bool pushforce)
+    {
+        // Since this force is being applied in only one step, make this a force per second.
+        OMV.Vector3 addForce = force / PhysScene.LastTimeStep;
+        AddForce(addForce, pushforce, false);
+    }
+    public override void AddForce(OMV.Vector3 force, bool pushforce, bool inTaintTime) {
+        if (force.IsFinite())
+        {
+            OMV.Vector3 addForce = Util.ClampV(force, BSParam.MaxAddForceMagnitude);
+            // DetailLog("{0},BSCharacter.addForce,call,force={1}", LocalID, addForce);
+
+            PhysScene.TaintedObject(inTaintTime, LocalID, "BSCharacter.AddForce", delegate()
+            {
+                // Bullet adds this central force to the total force for this tick
+                // DetailLog("{0},BSCharacter.addForce,taint,force={1}", LocalID, addForce);
+                if (PhysBody.HasPhysicalBody)
+                {
+                    PhysScene.PE.ApplyCentralForce(PhysBody, addForce);
+                }
+            });
+        }
+        else
+        {
+            m_log.WarnFormat("{0}: Got a NaN force applied to a character. LocalID={1}", LogHeader, LocalID);
+            return;
+        }
+    }
+
+    public override void AddAngularForce(OMV.Vector3 force, bool pushforce, bool inTaintTime) {
+    }
+    public override void SetMomentum(OMV.Vector3 momentum) {
+    }
+
+    private OMV.Vector3 ComputeAvatarScale(OMV.Vector3 size)
+    {
+        OMV.Vector3 newScale = size;
+
+        // Bullet's capsule total height is the "passed height + radius * 2";
+        // The base capsule is 1 unit in diameter and 2 units in height (passed radius=0.5, passed height = 1)
+        // The number we pass in for 'scaling' is the multiplier to get that base
+        //     shape to be the size desired.
+        // So, when creating the scale for the avatar height, we take the passed height
+        //     (size.Z) and remove the caps.
+        // An oddity of the Bullet capsule implementation is that it presumes the Y
+        //     dimension is the radius of the capsule. Even though some of the code allows
+        //     for a asymmetrical capsule, other parts of the code presume it is cylindrical.
+
+        // Scale is multiplier of radius with one of "0.5"
+
+        float heightAdjust = BSParam.AvatarHeightMidFudge;
+        if (BSParam.AvatarHeightLowFudge != 0f || BSParam.AvatarHeightHighFudge != 0f)
+        {
+            const float AVATAR_LOW = 1.1f;
+            const float AVATAR_MID = 1.775f; // 1.87f
+            const float AVATAR_HI = 2.45f;
+            // An avatar is between 1.1 and 2.45 meters. Midpoint is 1.775m.
+            float midHeightOffset = size.Z - AVATAR_MID;
+            if (midHeightOffset < 0f)
+            {
+                // Small avatar. Add the adjustment based on the distance from midheight
+                heightAdjust += ((-1f * midHeightOffset) / (AVATAR_MID - AVATAR_LOW)) * BSParam.AvatarHeightLowFudge;
+            }
+            else
+            {
+                // Large avatar. Add the adjustment based on the distance from midheight
+                heightAdjust += ((midHeightOffset) / (AVATAR_HI - AVATAR_MID)) * BSParam.AvatarHeightHighFudge;
+            }
+        }
+        if (BSParam.AvatarShape == BSShapeCollection.AvatarShapeCapsule)
+        {
+            newScale.X = size.X / 2f;
+            newScale.Y = size.Y / 2f;
+            // The total scale height is the central cylindar plus the caps on the two ends.
+            newScale.Z = (size.Z + (Math.Min(size.X, size.Y) * 2) + heightAdjust) / 2f;
+        }
+        else
+        {
+            newScale.Z = size.Z + heightAdjust;
+        }
+        // m_log.DebugFormat("{0} ComputeAvatarScale: size={1},adj={2},scale={3}", LogHeader, size, heightAdjust, newScale);
+
+        // If smaller than the endcaps, just fake like we're almost that small
+        if (newScale.Z < 0)
+            newScale.Z = 0.1f;
+
+        DetailLog("{0},BSCharacter.ComputerAvatarScale,size={1},lowF={2},midF={3},hiF={4},adj={5},newScale={6}",
+            LocalID, size, BSParam.AvatarHeightLowFudge, BSParam.AvatarHeightMidFudge, BSParam.AvatarHeightHighFudge, heightAdjust, newScale);
+
+        return newScale;
+    }
+
+    // set _avatarVolume and _mass based on capsule size, _density and Scale
+    private void ComputeAvatarVolumeAndMass()
+    {
+        _avatarVolume = (float)(
+                        Math.PI
+                        * Size.X / 2f
+                        * Size.Y / 2f    // the area of capsule cylinder
+                        * Size.Z         // times height of capsule cylinder
+                      + 1.33333333f
+                        * Math.PI
+                        * Size.X / 2f
+                        * Math.Min(Size.X, Size.Y) / 2
+                        * Size.Y / 2f    // plus the volume of the capsule end caps
+                        );
+        _mass = Density * BSParam.DensityScaleFactor * _avatarVolume;
+    }
+
+    // The physics engine says that properties have updated. Update same and inform
+    // the world that things have changed.
+    public override void UpdateProperties(EntityProperties entprop)
+    {
+        // Let anyone (like the actors) modify the updated properties before they are pushed into the object and the simulator.
+        TriggerPreUpdatePropertyAction(ref entprop);
+
+        RawPosition = entprop.Position;
+        RawOrientation = entprop.Rotation;
+
+        // Smooth velocity. OpenSimulator is VERY sensitive to changes in velocity of the avatar
+        //    and will send agent updates to the clients if velocity changes by more than
+        //    0.001m/s. Bullet introduces a lot of jitter in the velocity which causes many
+        //    extra updates.
+        //
+        // XXX: Contrary to the above comment, setting an update threshold here above 0.4 actually introduces jitter to 
+        // avatar movement rather than removes it.  The larger the threshold, the bigger the jitter.
+        // This is most noticeable in level flight and can be seen with
+        // the "show updates" option in a viewer.  With an update threshold, the RawVelocity cycles between a lower
+        // bound and an upper bound, where the difference between the two is enough to trigger a large delta v update
+        // and subsequently trigger an update in ScenePresence.SendTerseUpdateToAllClients().  The cause of this cycle (feedback?)
+        // has not yet been identified.
+        //
+        // If there is a threshold below 0.4 or no threshold check at all (as in ODE), then RawVelocity stays constant and extra
+        // updates are not triggered in ScenePresence.SendTerseUpdateToAllClients().
+//        if (!entprop.Velocity.ApproxEquals(RawVelocity, 0.1f))
+            RawVelocity = entprop.Velocity;
+
+        _acceleration = entprop.Acceleration;
+        _rotationalVelocity = entprop.RotationalVelocity;
+
+        // Do some sanity checking for the avatar. Make sure it's above ground and inbounds.
+        if (PositionSanityCheck(true))
+        {
+            DetailLog("{0},BSCharacter.UpdateProperties,updatePosForSanity,pos={1}", LocalID, RawPosition);
+            entprop.Position = RawPosition;
+        }
+
+        // remember the current and last set values
+        LastEntityProperties = CurrentEntityProperties;
+        CurrentEntityProperties = entprop;
+
+        // Tell the linkset about value changes
+        // Linkset.UpdateProperties(UpdatedProperties.EntPropUpdates, this);
+
+        // Avatars don't report their changes the usual way. Changes are checked for in the heartbeat loop.
+        // PhysScene.PostUpdate(this);
+
+        DetailLog("{0},BSCharacter.UpdateProperties,call,pos={1},orient={2},vel={3},accel={4},rotVel={5}",
+                LocalID, RawPosition, RawOrientation, RawVelocity, _acceleration, _rotationalVelocity);
+    }
+}
+}
diff --git a/OpenSim/Region/PhysicsModules/BulletS/BSConstraint.cs b/OpenSim/Region/PhysicsModules/BulletS/BSConstraint.cs
new file mode 100755
index 0000000..e42e868
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/BSConstraint.cs
@@ -0,0 +1,144 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyrightD
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+using System;
+using System.Collections.Generic;
+using System.Text;
+using OpenMetaverse;
+
+namespace OpenSim.Region.PhysicsModule.BulletS
+{
+
+public abstract class BSConstraint : IDisposable
+{
+    private static string LogHeader = "[BULLETSIM CONSTRAINT]";
+
+    protected BulletWorld m_world;
+    protected BSScene PhysicsScene;
+    protected BulletBody m_body1;
+    protected BulletBody m_body2;
+    protected BulletConstraint m_constraint;
+    protected bool m_enabled = false;
+
+    public BulletBody Body1 { get { return m_body1; } }
+    public BulletBody Body2 { get { return m_body2; } }
+    public BulletConstraint Constraint { get { return m_constraint; } }
+    public abstract ConstraintType Type { get; }
+    public bool IsEnabled { get { return m_enabled; } }
+
+    public BSConstraint(BulletWorld world)
+    {
+        m_world = world;
+        PhysicsScene = m_world.physicsScene;
+    }
+
+    public virtual void Dispose()
+    {
+        if (m_enabled)
+        {
+            m_enabled = false;
+            if (m_constraint.HasPhysicalConstraint)
+            {
+                bool success = PhysicsScene.PE.DestroyConstraint(m_world, m_constraint);
+                m_world.physicsScene.DetailLog("{0},BSConstraint.Dispose,taint,id1={1},body1={2},id2={3},body2={4},success={5}",
+                                    m_body1.ID,
+                                    m_body1.ID, m_body1.AddrString,
+                                    m_body2.ID, m_body2.AddrString,
+                                    success);
+                m_constraint.Clear();
+            }
+        }
+    }
+
+    public virtual bool SetLinearLimits(Vector3 low, Vector3 high)
+    {
+        bool ret = false;
+        if (m_enabled)
+        {
+            m_world.physicsScene.DetailLog("{0},BSConstraint.SetLinearLimits,taint,low={1},high={2}", m_body1.ID, low, high);
+            ret = PhysicsScene.PE.SetLinearLimits(m_constraint, low, high);
+        }
+        return ret;
+    }
+
+    public virtual bool SetAngularLimits(Vector3 low, Vector3 high)
+    {
+        bool ret = false;
+        if (m_enabled)
+        {
+            m_world.physicsScene.DetailLog("{0},BSConstraint.SetAngularLimits,taint,low={1},high={2}", m_body1.ID, low, high);
+            ret = PhysicsScene.PE.SetAngularLimits(m_constraint, low, high);
+        }
+        return ret;
+    }
+
+    public virtual bool SetSolverIterations(float cnt)
+    {
+        bool ret = false;
+        if (m_enabled)
+        {
+            PhysicsScene.PE.SetConstraintNumSolverIterations(m_constraint, cnt);
+            ret = true;
+        }
+        return ret;
+    }
+
+    public virtual bool CalculateTransforms()
+    {
+        bool ret = false;
+        if (m_enabled)
+        {
+            // Recompute the internal transforms
+            PhysicsScene.PE.CalculateTransforms(m_constraint);
+            ret = true;
+        }
+        return ret;
+    }
+
+    // Reset this constraint making sure it has all its internal structures
+    //    recomputed and is enabled and ready to go.
+    public virtual bool RecomputeConstraintVariables(float mass)
+    {
+        bool ret = false;
+        if (m_enabled)
+        {
+            ret = CalculateTransforms();
+            if (ret)
+            {
+                // Setting an object's mass to zero (making it static like when it's selected)
+                //     automatically disables the constraints.
+                // If the link is enabled, be sure to set the constraint itself to enabled.
+                PhysicsScene.PE.SetConstraintEnable(m_constraint, BSParam.NumericBool(true));
+            }
+            else
+            {
+                m_world.physicsScene.Logger.ErrorFormat("{0} CalculateTransforms failed. A={1}, B={2}", LogHeader, Body1.ID, Body2.ID);
+            }
+        }
+        return ret;
+    }
+}
+}
diff --git a/OpenSim/Region/PhysicsModules/BulletS/BSConstraint6Dof.cs b/OpenSim/Region/PhysicsModules/BulletS/BSConstraint6Dof.cs
new file mode 100755
index 0000000..4bcde2b
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/BSConstraint6Dof.cs
@@ -0,0 +1,180 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyrightD
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+using System;
+using System.Collections.Generic;
+using System.Text;
+using OpenMetaverse;
+
+namespace OpenSim.Region.PhysicsModule.BulletS
+{
+
+public class BSConstraint6Dof : BSConstraint
+{
+    private static string LogHeader = "[BULLETSIM 6DOF CONSTRAINT]";
+
+    public override ConstraintType Type { get { return ConstraintType.D6_CONSTRAINT_TYPE; } }
+
+    public BSConstraint6Dof(BulletWorld world, BulletBody obj1, BulletBody obj2) :base(world)
+    {
+        m_body1 = obj1;
+        m_body2 = obj2;
+        m_enabled = false;
+    }
+
+    // Create a btGeneric6DofConstraint
+    public BSConstraint6Dof(BulletWorld world, BulletBody obj1, BulletBody obj2,
+                    Vector3 frame1, Quaternion frame1rot,
+                    Vector3 frame2, Quaternion frame2rot,
+                    bool useLinearReferenceFrameA, bool disableCollisionsBetweenLinkedBodies)
+        : base(world)
+    {
+        m_body1 = obj1;
+        m_body2 = obj2;
+        m_constraint = PhysicsScene.PE.Create6DofConstraint(m_world, m_body1, m_body2,
+                                frame1, frame1rot,
+                                frame2, frame2rot,
+                                useLinearReferenceFrameA, disableCollisionsBetweenLinkedBodies);
+        m_enabled = true;
+        PhysicsScene.DetailLog("{0},BS6DofConstraint,create,wID={1}, rID={2}, rBody={3}, cID={4}, cBody={5}",
+                            m_body1.ID, world.worldID,
+                            obj1.ID, obj1.AddrString, obj2.ID, obj2.AddrString);
+        PhysicsScene.DetailLog("{0},BS6DofConstraint,create,  f1Loc={1},f1Rot={2},f2Loc={3},f2Rot={4},usefA={5},disCol={6}",
+                            m_body1.ID, frame1, frame1rot, frame2, frame2rot, useLinearReferenceFrameA, disableCollisionsBetweenLinkedBodies);
+    }
+
+    // 6 Dof constraint based on a midpoint between the two constrained bodies
+    public BSConstraint6Dof(BulletWorld world, BulletBody obj1, BulletBody obj2,
+                    Vector3 joinPoint,
+                    bool useLinearReferenceFrameA, bool disableCollisionsBetweenLinkedBodies)
+        : base(world)
+    {
+        m_body1 = obj1;
+        m_body2 = obj2;
+        if (!obj1.HasPhysicalBody || !obj2.HasPhysicalBody)
+        {
+            world.physicsScene.DetailLog("{0},BS6DOFConstraint,badBodyPtr,wID={1}, rID={2}, rBody={3}, cID={4}, cBody={5}",
+                            BSScene.DetailLogZero, world.worldID,
+                            obj1.ID, obj1.AddrString, obj2.ID, obj2.AddrString);
+            world.physicsScene.Logger.ErrorFormat("{0} Attempt to build 6DOF constraint with missing bodies: wID={1}, rID={2}, rBody={3}, cID={4}, cBody={5}",
+                            LogHeader, world.worldID, obj1.ID, obj1.AddrString, obj2.ID, obj2.AddrString);
+            m_enabled = false;
+        }
+        else
+        {
+            m_constraint = PhysicsScene.PE.Create6DofConstraintToPoint(m_world, m_body1, m_body2,
+                                    joinPoint,
+                                    useLinearReferenceFrameA, disableCollisionsBetweenLinkedBodies);
+
+            PhysicsScene.DetailLog("{0},BS6DofConstraint,createMidPoint,wID={1}, csrt={2}, rID={3}, rBody={4}, cID={5}, cBody={6}",
+                                m_body1.ID, world.worldID, m_constraint.AddrString,
+                                obj1.ID, obj1.AddrString, obj2.ID, obj2.AddrString);
+
+            if (!m_constraint.HasPhysicalConstraint)
+            {
+                world.physicsScene.Logger.ErrorFormat("{0} Failed creation of 6Dof constraint. rootID={1}, childID={2}",
+                                LogHeader, obj1.ID, obj2.ID);
+                m_enabled = false;
+            }
+            else
+            {
+                m_enabled = true;
+            }
+        }
+    }
+
+    // A 6 Dof constraint that is fixed in the world and constrained to a on-the-fly created static object
+    public BSConstraint6Dof(BulletWorld world, BulletBody obj1, Vector3 frameInBloc, Quaternion frameInBrot,
+                    bool useLinearReferenceFrameB, bool disableCollisionsBetweenLinkedBodies)
+        : base(world)
+    {
+        m_body1 = obj1;
+        m_body2 = obj1; // Look out for confusion down the road
+        m_constraint = PhysicsScene.PE.Create6DofConstraintFixed(m_world, m_body1,
+                                frameInBloc, frameInBrot,
+                                useLinearReferenceFrameB, disableCollisionsBetweenLinkedBodies);
+        m_enabled = true;
+        PhysicsScene.DetailLog("{0},BS6DofConstraint,createFixed,wID={1},rID={2},rBody={3}",
+                                    m_body1.ID, world.worldID, obj1.ID, obj1.AddrString);
+        PhysicsScene.DetailLog("{0},BS6DofConstraint,createFixed,  fBLoc={1},fBRot={2},usefA={3},disCol={4}",
+                            m_body1.ID, frameInBloc, frameInBrot, useLinearReferenceFrameB, disableCollisionsBetweenLinkedBodies);
+    }
+
+    public bool SetFrames(Vector3 frameA, Quaternion frameArot, Vector3 frameB, Quaternion frameBrot)
+    {
+        bool ret = false;
+        if (m_enabled)
+        {
+            PhysicsScene.PE.SetFrames(m_constraint, frameA, frameArot, frameB, frameBrot);
+            ret = true;
+        }
+        return ret;
+    }
+
+    public bool SetCFMAndERP(float cfm, float erp)
+    {
+        bool ret = false;
+        if (m_enabled)
+        {
+            PhysicsScene.PE.SetConstraintParam(m_constraint, ConstraintParams.BT_CONSTRAINT_STOP_CFM, cfm, ConstraintParamAxis.AXIS_ALL);
+            PhysicsScene.PE.SetConstraintParam(m_constraint, ConstraintParams.BT_CONSTRAINT_STOP_ERP, erp, ConstraintParamAxis.AXIS_ALL);
+            PhysicsScene.PE.SetConstraintParam(m_constraint, ConstraintParams.BT_CONSTRAINT_CFM, cfm, ConstraintParamAxis.AXIS_ALL);
+            ret = true;
+        }
+        return ret;
+    }
+
+    public bool UseFrameOffset(bool useOffset)
+    {
+        bool ret = false;
+        float onOff = useOffset ? ConfigurationParameters.numericTrue : ConfigurationParameters.numericFalse;
+        if (m_enabled)
+            ret = PhysicsScene.PE.UseFrameOffset(m_constraint, onOff);
+        return ret;
+    }
+
+    public bool TranslationalLimitMotor(bool enable, float targetVelocity, float maxMotorForce)
+    {
+        bool ret = false;
+        float onOff = enable ? ConfigurationParameters.numericTrue : ConfigurationParameters.numericFalse;
+        if (m_enabled)
+        {
+            ret = PhysicsScene.PE.TranslationalLimitMotor(m_constraint, onOff, targetVelocity, maxMotorForce);
+            m_world.physicsScene.DetailLog("{0},BS6DOFConstraint,TransLimitMotor,enable={1},vel={2},maxForce={3}",
+                            BSScene.DetailLogZero, enable, targetVelocity, maxMotorForce);
+        }
+        return ret;
+    }
+
+    public bool SetBreakingImpulseThreshold(float threshold)
+    {
+        bool ret = false;
+        if (m_enabled)
+            ret = PhysicsScene.PE.SetBreakingImpulseThreshold(m_constraint, threshold);
+        return ret;
+    }
+}
+}
diff --git a/OpenSim/Region/PhysicsModules/BulletS/BSConstraintCollection.cs b/OpenSim/Region/PhysicsModules/BulletS/BSConstraintCollection.cs
new file mode 100755
index 0000000..5746ac1
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/BSConstraintCollection.cs
@@ -0,0 +1,181 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyrightD
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+using System;
+using System.Collections.Generic;
+using System.Text;
+using log4net;
+using OpenMetaverse;
+
+namespace OpenSim.Region.PhysicsModule.BulletS
+{
+
+public sealed class BSConstraintCollection : IDisposable
+{
+    // private static readonly ILog m_log = LogManager.GetLogger(System.Reflection.MethodBase.GetCurrentMethod().DeclaringType);
+    // private static readonly string LogHeader = "[CONSTRAINT COLLECTION]";
+
+    delegate bool ConstraintAction(BSConstraint constrain);
+
+    private List<BSConstraint> m_constraints;
+    private BulletWorld m_world;
+
+    public BSConstraintCollection(BulletWorld world)
+    {
+        m_world = world;
+        m_constraints = new List<BSConstraint>();
+    }
+
+    public void Dispose()
+    {
+        this.Clear();
+    }
+
+    public void Clear()
+    {
+        lock (m_constraints)
+        {
+            foreach (BSConstraint cons in m_constraints)
+            {
+                cons.Dispose();
+            }
+            m_constraints.Clear();
+        }
+    }
+
+    public bool AddConstraint(BSConstraint cons)
+    {
+        lock (m_constraints)
+        {
+            // There is only one constraint between any bodies. Remove any old just to make sure.
+            RemoveAndDestroyConstraint(cons.Body1, cons.Body2);
+
+            m_constraints.Add(cons);
+        }
+
+        return true;
+    }
+
+    // Get the constraint between two bodies. There can be only one.
+    // Return 'true' if a constraint was found.
+    public bool TryGetConstraint(BulletBody body1, BulletBody body2, out BSConstraint returnConstraint)
+    {
+        bool found = false;
+        BSConstraint foundConstraint = null;
+
+        uint lookingID1 = body1.ID;
+        uint lookingID2 = body2.ID;
+        lock (m_constraints)
+        {
+            foreach (BSConstraint constrain in m_constraints)
+            {
+                if ((constrain.Body1.ID == lookingID1 && constrain.Body2.ID == lookingID2)
+                    || (constrain.Body1.ID == lookingID2 && constrain.Body2.ID == lookingID1))
+                {
+                    foundConstraint = constrain;
+                    found = true;
+                    break;
+                }
+            }
+        }
+        returnConstraint = foundConstraint;
+        return found;
+    }
+
+    // Remove any constraint between the passed bodies.
+    // Presumed there is only one such constraint possible.
+    // Return 'true' if a constraint was found and destroyed.
+    public bool RemoveAndDestroyConstraint(BulletBody body1, BulletBody body2)
+    {
+        bool ret = false;
+        lock (m_constraints)
+        {
+            BSConstraint constrain;
+            if (this.TryGetConstraint(body1, body2, out constrain))
+            {
+                // remove the constraint from our collection
+                ret = RemoveAndDestroyConstraint(constrain);
+            }
+        }
+
+        return ret;
+    }
+
+    // The constraint MUST exist in the collection
+    // Could be called if the constraint was previously removed.
+    // Return 'true' if the constraint was actually removed and disposed.
+    public bool RemoveAndDestroyConstraint(BSConstraint constrain)
+    {
+        bool removed = false;
+        lock (m_constraints)
+        {
+            // remove the constraint from our collection
+            removed = m_constraints.Remove(constrain);
+        }
+        // Dispose() is safe to call multiple times
+        constrain.Dispose();
+        return removed;
+    }
+
+    // Remove all constraints that reference the passed body.
+    // Return 'true' if any constraints were destroyed.
+    public bool RemoveAndDestroyConstraint(BulletBody body1)
+    {
+        List<BSConstraint> toRemove = new List<BSConstraint>();
+        uint lookingID = body1.ID;
+        lock (m_constraints)
+        {
+            foreach (BSConstraint constrain in m_constraints)
+            {
+                if (constrain.Body1.ID == lookingID || constrain.Body2.ID == lookingID)
+                {
+                    toRemove.Add(constrain);
+                }
+            }
+            foreach (BSConstraint constrain in toRemove)
+            {
+                m_constraints.Remove(constrain);
+                constrain.Dispose();
+            }
+        }
+        return (toRemove.Count > 0);
+    }
+
+    public bool RecalculateAllConstraints()
+    {
+        bool ret = false;
+        lock (m_constraints)
+        {
+            foreach (BSConstraint constrain in m_constraints)
+            {
+                constrain.CalculateTransforms();
+                ret = true;
+            }
+        }
+        return ret;
+    }
+}
+}
diff --git a/OpenSim/Region/PhysicsModules/BulletS/BSConstraintConeTwist.cs b/OpenSim/Region/PhysicsModules/BulletS/BSConstraintConeTwist.cs
new file mode 100755
index 0000000..e7566a8
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/BSConstraintConeTwist.cs
@@ -0,0 +1,54 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyrightD
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+using System;
+using System.Collections.Generic;
+using System.Text;
+using OpenMetaverse;
+
+namespace OpenSim.Region.PhysicsModule.BulletS
+{
+
+public sealed class BSConstraintConeTwist : BSConstraint
+{
+    public override ConstraintType Type { get { return ConstraintType.CONETWIST_CONSTRAINT_TYPE; } }
+
+    public BSConstraintConeTwist(BulletWorld world, BulletBody obj1, BulletBody obj2,
+                    Vector3 frameInAloc, Quaternion frameInArot,
+                    Vector3 frameInBloc, Quaternion frameInBrot,
+                    bool disableCollisionsBetweenLinkedBodies)
+        : base(world)
+    {
+        m_body1 = obj1;
+        m_body2 = obj2;
+        m_constraint = PhysicsScene.PE.CreateConeTwistConstraint(world, obj1, obj2,
+                                frameInAloc, frameInArot, frameInBloc, frameInBrot,
+                                disableCollisionsBetweenLinkedBodies);
+        m_enabled = true;
+    }
+}
+
+}
diff --git a/OpenSim/Region/PhysicsModules/BulletS/BSConstraintHinge.cs b/OpenSim/Region/PhysicsModules/BulletS/BSConstraintHinge.cs
new file mode 100755
index 0000000..d20538d
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/BSConstraintHinge.cs
@@ -0,0 +1,55 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyrightD
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+using System;
+using System.Collections.Generic;
+using System.Text;
+using OpenMetaverse;
+
+namespace OpenSim.Region.PhysicsModule.BulletS
+{
+
+public sealed class BSConstraintHinge : BSConstraint
+{
+    public override ConstraintType Type { get { return ConstraintType.HINGE_CONSTRAINT_TYPE; } }
+
+    public BSConstraintHinge(BulletWorld world, BulletBody obj1, BulletBody obj2,
+                    Vector3 pivotInA, Vector3 pivotInB,
+                    Vector3 axisInA, Vector3 axisInB,
+                    bool useLinearReferenceFrameA, bool disableCollisionsBetweenLinkedBodies)
+        : base(world)
+    {
+        m_body1 = obj1;
+        m_body2 = obj2;
+        m_constraint = PhysicsScene.PE.CreateHingeConstraint(world, obj1, obj2,
+                                pivotInA, pivotInB, axisInA, axisInB,
+                                useLinearReferenceFrameA, disableCollisionsBetweenLinkedBodies);
+        m_enabled = true;
+    }
+
+}
+
+}
diff --git a/OpenSim/Region/PhysicsModules/BulletS/BSConstraintSlider.cs b/OpenSim/Region/PhysicsModules/BulletS/BSConstraintSlider.cs
new file mode 100755
index 0000000..83d42af
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/BSConstraintSlider.cs
@@ -0,0 +1,55 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyrightD
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+using System;
+using System.Collections.Generic;
+using System.Text;
+using OpenMetaverse;
+
+namespace OpenSim.Region.PhysicsModule.BulletS
+{
+
+public sealed class BSConstraintSlider : BSConstraint
+{
+    public override ConstraintType Type { get { return ConstraintType.SLIDER_CONSTRAINT_TYPE; } }
+
+    public BSConstraintSlider(BulletWorld world, BulletBody obj1, BulletBody obj2,
+                    Vector3 frameInAloc, Quaternion frameInArot,
+                    Vector3 frameInBloc, Quaternion frameInBrot,
+                    bool useLinearReferenceFrameA, bool disableCollisionsBetweenLinkedBodies)
+        : base(world)
+    {
+        m_body1 = obj1;
+        m_body2 = obj2;
+        m_constraint = PhysicsScene.PE.CreateSliderConstraint(world, obj1, obj2,
+                                frameInAloc, frameInArot, frameInBloc, frameInBrot,
+                                useLinearReferenceFrameA, disableCollisionsBetweenLinkedBodies);
+        m_enabled = true;
+    }
+
+}
+
+}
diff --git a/OpenSim/Region/PhysicsModules/BulletS/BSConstraintSpring.cs b/OpenSim/Region/PhysicsModules/BulletS/BSConstraintSpring.cs
new file mode 100755
index 0000000..563a1b1
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/BSConstraintSpring.cs
@@ -0,0 +1,103 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyrightD
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+using System;
+using System.Collections.Generic;
+using System.Text;
+using OpenMetaverse;
+
+namespace OpenSim.Region.PhysicsModule.BulletS
+{
+
+public sealed class BSConstraintSpring : BSConstraint6Dof
+{
+    public override ConstraintType Type { get { return ConstraintType.D6_SPRING_CONSTRAINT_TYPE; } }
+
+    public BSConstraintSpring(BulletWorld world, BulletBody obj1, BulletBody obj2,
+                    Vector3 frame1Loc, Quaternion frame1Rot,
+                    Vector3 frame2Loc, Quaternion frame2Rot,
+                    bool useLinearReferenceFrameA, bool disableCollisionsBetweenLinkedBodies)
+        :base(world, obj1, obj2)
+    {
+        m_constraint = PhysicsScene.PE.Create6DofSpringConstraint(world, obj1, obj2,
+                                frame1Loc, frame1Rot, frame2Loc, frame2Rot,
+                                useLinearReferenceFrameA, disableCollisionsBetweenLinkedBodies);
+        m_enabled = true;
+
+        PhysicsScene.DetailLog("{0},BSConstraintSpring,create,wID={1}, rID={2}, rBody={3}, cID={4}, cBody={5}",
+                            obj1.ID, world.worldID, obj1.ID, obj1.AddrString, obj2.ID, obj2.AddrString);
+        PhysicsScene.DetailLog("{0},BSConstraintSpring,create,  f1Loc={1},f1Rot={2},f2Loc={3},f2Rot={4},usefA={5},disCol={6}",
+                    m_body1.ID, frame1Loc, frame1Rot, frame2Loc, frame2Rot, useLinearReferenceFrameA, disableCollisionsBetweenLinkedBodies);
+    }
+
+    public bool SetAxisEnable(int pIndex, bool pAxisEnable)
+    {
+        PhysicsScene.DetailLog("{0},BSConstraintSpring.SetEnable,obj1ID={1},obj2ID={2},indx={3},enable={4}",
+                                        m_body1.ID, m_body1.ID, m_body2.ID, pIndex, pAxisEnable);
+        PhysicsScene.PE.SpringEnable(m_constraint, pIndex, BSParam.NumericBool(pAxisEnable));
+        return true;
+    }
+
+    public bool SetStiffness(int pIndex, float pStiffness)
+    {
+        PhysicsScene.DetailLog("{0},BSConstraintSpring.SetStiffness,obj1ID={1},obj2ID={2},indx={3},stiff={4}",
+                                        m_body1.ID, m_body1.ID, m_body2.ID, pIndex, pStiffness);
+        PhysicsScene.PE.SpringSetStiffness(m_constraint, pIndex, pStiffness);
+        return true;
+    }
+
+    public bool SetDamping(int pIndex, float pDamping)
+    {
+        PhysicsScene.DetailLog("{0},BSConstraintSpring.SetDamping,obj1ID={1},obj2ID={2},indx={3},damp={4}",
+                                        m_body1.ID, m_body1.ID, m_body2.ID, pIndex, pDamping);
+        PhysicsScene.PE.SpringSetDamping(m_constraint, pIndex, pDamping);
+        return true;
+    }
+
+    public bool SetEquilibriumPoint(int pIndex, float pEqPoint)
+    {
+        PhysicsScene.DetailLog("{0},BSConstraintSpring.SetEquilibriumPoint,obj1ID={1},obj2ID={2},indx={3},eqPoint={4}",
+                                        m_body1.ID, m_body1.ID, m_body2.ID, pIndex, pEqPoint);
+        PhysicsScene.PE.SpringSetEquilibriumPoint(m_constraint, pIndex, pEqPoint);
+        return true;
+    }
+
+    public bool SetEquilibriumPoint(Vector3 linearEq, Vector3 angularEq)
+    {
+        PhysicsScene.DetailLog("{0},BSConstraintSpring.SetEquilibriumPoint,obj1ID={1},obj2ID={2},linearEq={3},angularEq={4}",
+                                        m_body1.ID, m_body1.ID, m_body2.ID, linearEq, angularEq);
+        PhysicsScene.PE.SpringSetEquilibriumPoint(m_constraint, 0, linearEq.X);
+        PhysicsScene.PE.SpringSetEquilibriumPoint(m_constraint, 1, linearEq.Y);
+        PhysicsScene.PE.SpringSetEquilibriumPoint(m_constraint, 2, linearEq.Z);
+        PhysicsScene.PE.SpringSetEquilibriumPoint(m_constraint, 3, angularEq.X);
+        PhysicsScene.PE.SpringSetEquilibriumPoint(m_constraint, 4, angularEq.Y);
+        PhysicsScene.PE.SpringSetEquilibriumPoint(m_constraint, 5, angularEq.Z);
+        return true;
+    }
+
+}
+
+}
\ No newline at end of file
diff --git a/OpenSim/Region/PhysicsModules/BulletS/BSDynamics.cs b/OpenSim/Region/PhysicsModules/BulletS/BSDynamics.cs
new file mode 100644
index 0000000..0fc5577
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/BSDynamics.cs
@@ -0,0 +1,1800 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * The quotations from http://wiki.secondlife.com/wiki/Linden_Vehicle_Tutorial
+ * are Copyright (c) 2009 Linden Research, Inc and are used under their license
+ * of Creative Commons Attribution-Share Alike 3.0
+ * (http://creativecommons.org/licenses/by-sa/3.0/).
+ */
+
+using System;
+using System.Collections.Generic;
+using System.Reflection;
+using System.Runtime.InteropServices;
+using OpenMetaverse;
+using OpenSim.Framework;
+using OpenSim.Region.PhysicsModules.SharedBase;
+
+namespace OpenSim.Region.PhysicsModule.BulletS
+{
+    public sealed class BSDynamics : BSActor
+    {
+#pragma warning disable 414
+        private static string LogHeader = "[BULLETSIM VEHICLE]";
+#pragma warning restore 414
+
+        // the prim this dynamic controller belongs to
+        private BSPrimLinkable ControllingPrim { get; set; }
+
+        private bool m_haveRegisteredForSceneEvents;
+
+        // mass of the vehicle fetched each time we're calles
+        private float m_vehicleMass;
+
+        // Vehicle properties
+        public Vehicle Type { get; set; }
+
+        // private Quaternion m_referenceFrame = Quaternion.Identity;   // Axis modifier
+        private VehicleFlag m_flags = (VehicleFlag) 0;                  // Boolean settings:
+                                                                        // HOVER_TERRAIN_ONLY
+                                                                        // HOVER_GLOBAL_HEIGHT
+                                                                        // NO_DEFLECTION_UP
+                                                                        // HOVER_WATER_ONLY
+                                                                        // HOVER_UP_ONLY
+                                                                        // LIMIT_MOTOR_UP
+                                                                        // LIMIT_ROLL_ONLY
+        private Vector3 m_BlockingEndPoint = Vector3.Zero;
+        private Quaternion m_RollreferenceFrame = Quaternion.Identity;
+        private Quaternion m_referenceFrame = Quaternion.Identity;
+
+        // Linear properties
+        private BSVMotor m_linearMotor = new BSVMotor("LinearMotor");
+        private Vector3 m_linearMotorDirection = Vector3.Zero;          // velocity requested by LSL, decayed by time
+        private Vector3 m_linearMotorOffset = Vector3.Zero;             // the point of force can be offset from the center
+        private Vector3 m_linearMotorDirectionLASTSET = Vector3.Zero;   // velocity requested by LSL
+        private Vector3 m_linearFrictionTimescale = Vector3.Zero;
+        private float m_linearMotorDecayTimescale = 1;
+        private float m_linearMotorTimescale = 1;
+        private Vector3 m_lastLinearVelocityVector = Vector3.Zero;
+        private Vector3 m_lastPositionVector = Vector3.Zero;
+        // private bool m_LinearMotorSetLastFrame = false;
+        // private Vector3 m_linearMotorOffset = Vector3.Zero;
+
+        //Angular properties
+        private BSVMotor m_angularMotor = new BSVMotor("AngularMotor");
+        private Vector3 m_angularMotorDirection = Vector3.Zero;         // angular velocity requested by LSL motor
+        // private int m_angularMotorApply = 0;                            // application frame counter
+        private Vector3 m_angularMotorVelocity = Vector3.Zero;          // current angular motor velocity
+        private float m_angularMotorTimescale = 1;                      // motor angular velocity ramp up rate
+        private float m_angularMotorDecayTimescale = 1;                 // motor angular velocity decay rate
+        private Vector3 m_angularFrictionTimescale = Vector3.Zero;      // body angular velocity  decay rate
+        private Vector3 m_lastAngularVelocity = Vector3.Zero;
+        private Vector3 m_lastVertAttractor = Vector3.Zero;             // what VA was last applied to body
+
+        //Deflection properties
+        private BSVMotor m_angularDeflectionMotor = new BSVMotor("AngularDeflection");
+        private float m_angularDeflectionEfficiency = 0;
+        private float m_angularDeflectionTimescale = 0;
+        private float m_linearDeflectionEfficiency = 0;
+        private float m_linearDeflectionTimescale = 0;
+
+        //Banking properties
+        private float m_bankingEfficiency = 0;
+        private float m_bankingMix = 1;
+        private float m_bankingTimescale = 0;
+
+        //Hover and Buoyancy properties
+        private BSVMotor m_hoverMotor = new BSVMotor("Hover");
+        private float m_VhoverHeight = 0f;
+        private float m_VhoverEfficiency = 0f;
+        private float m_VhoverTimescale = 0f;
+        private float m_VhoverTargetHeight = -1.0f;     // if <0 then no hover, else its the current target height
+        // Modifies gravity. Slider between -1 (double-gravity) and 1 (full anti-gravity)
+        private float m_VehicleBuoyancy = 0f;
+        private Vector3 m_VehicleGravity = Vector3.Zero;    // Gravity computed when buoyancy set
+
+        //Attractor properties
+        private BSVMotor m_verticalAttractionMotor = new BSVMotor("VerticalAttraction");
+        private float m_verticalAttractionEfficiency = 1.0f; // damped
+        private float m_verticalAttractionCutoff = 500f;     // per the documentation
+        // Timescale > cutoff  means no vert attractor.
+        private float m_verticalAttractionTimescale = 510f;
+
+        // Just some recomputed constants:
+#pragma warning disable 414
+        static readonly float TwoPI = ((float)Math.PI) * 2f; 
+        static readonly float FourPI = ((float)Math.PI) * 4f; 
+        static readonly float PIOverFour = ((float)Math.PI) / 4f;
+        static readonly float PIOverTwo = ((float)Math.PI) / 2f;
+#pragma warning restore 414
+
+        public BSDynamics(BSScene myScene, BSPrim myPrim, string actorName)
+            : base(myScene, myPrim, actorName)
+        {
+            Type = Vehicle.TYPE_NONE;
+            m_haveRegisteredForSceneEvents = false;
+
+            ControllingPrim = myPrim as BSPrimLinkable;
+            if (ControllingPrim == null)
+            {
+                // THIS CANNOT HAPPEN!!
+            }
+            VDetailLog("{0},Creation", ControllingPrim.LocalID);
+        }
+
+        // Return 'true' if this vehicle is doing vehicle things
+        public bool IsActive
+        {
+            get { return (Type != Vehicle.TYPE_NONE && ControllingPrim.IsPhysicallyActive); }
+        }
+
+        // Return 'true' if this a vehicle that should be sitting on the ground
+        public bool IsGroundVehicle
+        {
+            get { return (Type == Vehicle.TYPE_CAR || Type == Vehicle.TYPE_SLED); }
+        }
+
+        #region Vehicle parameter setting
+        public void ProcessFloatVehicleParam(Vehicle pParam, float pValue)
+        {
+            VDetailLog("{0},ProcessFloatVehicleParam,param={1},val={2}", ControllingPrim.LocalID, pParam, pValue);
+            float clampTemp;
+
+            switch (pParam)
+            {
+                case Vehicle.ANGULAR_DEFLECTION_EFFICIENCY:
+                    m_angularDeflectionEfficiency = ClampInRange(0f, pValue, 1f);
+                    break;
+                case Vehicle.ANGULAR_DEFLECTION_TIMESCALE:
+                    m_angularDeflectionTimescale = ClampInRange(0.25f, pValue, 120);
+                    break;
+                case Vehicle.ANGULAR_MOTOR_DECAY_TIMESCALE:
+                    m_angularMotorDecayTimescale = ClampInRange(0.25f, pValue, 120);
+                    m_angularMotor.TargetValueDecayTimeScale = m_angularMotorDecayTimescale;
+                    break;
+                case Vehicle.ANGULAR_MOTOR_TIMESCALE:
+                    m_angularMotorTimescale = ClampInRange(0.25f, pValue, 120);
+                    m_angularMotor.TimeScale = m_angularMotorTimescale;
+                    break;
+                case Vehicle.BANKING_EFFICIENCY:
+                    m_bankingEfficiency = ClampInRange(-1f, pValue, 1f);
+                    break;
+                case Vehicle.BANKING_MIX:
+                    m_bankingMix = ClampInRange(0.01f, pValue, 1);
+                    break;
+                case Vehicle.BANKING_TIMESCALE:
+                    m_bankingTimescale = ClampInRange(0.25f, pValue, 120);
+                    break;
+                case Vehicle.BUOYANCY:
+                    m_VehicleBuoyancy = ClampInRange(-1f, pValue, 1f);
+                    m_VehicleGravity = ControllingPrim.ComputeGravity(m_VehicleBuoyancy);
+                    break;
+                case Vehicle.HOVER_EFFICIENCY:
+                    m_VhoverEfficiency = ClampInRange(0.01f, pValue, 1f);
+                    break;
+                case Vehicle.HOVER_HEIGHT:
+                    m_VhoverHeight = ClampInRange(0f, pValue, 1000000f);
+                    break;
+                case Vehicle.HOVER_TIMESCALE:
+                    m_VhoverTimescale = ClampInRange(0.01f, pValue, 120);
+                    break;
+                case Vehicle.LINEAR_DEFLECTION_EFFICIENCY:
+                    m_linearDeflectionEfficiency = ClampInRange(0f, pValue, 1f);
+                    break;
+                case Vehicle.LINEAR_DEFLECTION_TIMESCALE:
+                    m_linearDeflectionTimescale = ClampInRange(0.01f, pValue, 120);
+                    break;
+                case Vehicle.LINEAR_MOTOR_DECAY_TIMESCALE:
+                    m_linearMotorDecayTimescale = ClampInRange(0.01f, pValue, 120);
+                    m_linearMotor.TargetValueDecayTimeScale = m_linearMotorDecayTimescale;
+                    break;
+                case Vehicle.LINEAR_MOTOR_TIMESCALE:
+                    m_linearMotorTimescale = ClampInRange(0.01f, pValue, 120);
+                    m_linearMotor.TimeScale = m_linearMotorTimescale;
+                    break;
+                case Vehicle.VERTICAL_ATTRACTION_EFFICIENCY:
+                    m_verticalAttractionEfficiency = ClampInRange(0.1f, pValue, 1f);
+                    m_verticalAttractionMotor.Efficiency = m_verticalAttractionEfficiency;
+                    break;
+                case Vehicle.VERTICAL_ATTRACTION_TIMESCALE:
+                    m_verticalAttractionTimescale = ClampInRange(0.01f, pValue, 120);
+                    m_verticalAttractionMotor.TimeScale = m_verticalAttractionTimescale;
+                    break;
+
+                // These are vector properties but the engine lets you use a single float value to
+                // set all of the components to the same value
+                case Vehicle.ANGULAR_FRICTION_TIMESCALE:
+                    clampTemp = ClampInRange(0.01f, pValue, 120);
+                    m_angularFrictionTimescale = new Vector3(clampTemp, clampTemp, clampTemp);
+                    break;
+                case Vehicle.ANGULAR_MOTOR_DIRECTION:
+                    clampTemp = ClampInRange(-TwoPI, pValue, TwoPI);
+                    m_angularMotorDirection = new Vector3(clampTemp, clampTemp, clampTemp);
+                    m_angularMotor.Zero();
+                    m_angularMotor.SetTarget(m_angularMotorDirection);
+                    break;
+                case Vehicle.LINEAR_FRICTION_TIMESCALE:
+                    clampTemp = ClampInRange(0.01f, pValue, 120);
+                    m_linearFrictionTimescale = new Vector3(clampTemp, clampTemp, clampTemp);
+                    break;
+                case Vehicle.LINEAR_MOTOR_DIRECTION:
+                    clampTemp = ClampInRange(-BSParam.MaxLinearVelocity, pValue, BSParam.MaxLinearVelocity);
+                    m_linearMotorDirection = new Vector3(clampTemp, clampTemp, clampTemp);
+                    m_linearMotorDirectionLASTSET = new Vector3(clampTemp, clampTemp, clampTemp);
+                    m_linearMotor.SetTarget(m_linearMotorDirection);
+                    break;
+                case Vehicle.LINEAR_MOTOR_OFFSET:
+                    clampTemp = ClampInRange(-1000, pValue, 1000);
+                    m_linearMotorOffset = new Vector3(clampTemp, clampTemp, clampTemp);
+                    break;
+
+            }
+        }//end ProcessFloatVehicleParam
+
+        internal void ProcessVectorVehicleParam(Vehicle pParam, Vector3 pValue)
+        {
+            VDetailLog("{0},ProcessVectorVehicleParam,param={1},val={2}", ControllingPrim.LocalID, pParam, pValue);
+            switch (pParam)
+            {
+                case Vehicle.ANGULAR_FRICTION_TIMESCALE:
+                    pValue.X = ClampInRange(0.25f, pValue.X, 120);
+                    pValue.Y = ClampInRange(0.25f, pValue.Y, 120);
+                    pValue.Z = ClampInRange(0.25f, pValue.Z, 120);
+                    m_angularFrictionTimescale = new Vector3(pValue.X, pValue.Y, pValue.Z);
+                    break;
+                case Vehicle.ANGULAR_MOTOR_DIRECTION:
+                    // Limit requested angular speed to 2 rps= 4 pi rads/sec
+                    pValue.X = ClampInRange(-FourPI, pValue.X, FourPI);
+                    pValue.Y = ClampInRange(-FourPI, pValue.Y, FourPI);
+                    pValue.Z = ClampInRange(-FourPI, pValue.Z, FourPI);
+                    m_angularMotorDirection = new Vector3(pValue.X, pValue.Y, pValue.Z);
+                    m_angularMotor.Zero();
+                    m_angularMotor.SetTarget(m_angularMotorDirection);
+                    break;
+                case Vehicle.LINEAR_FRICTION_TIMESCALE:
+                    pValue.X = ClampInRange(0.25f, pValue.X, 120);
+                    pValue.Y = ClampInRange(0.25f, pValue.Y, 120);
+                    pValue.Z = ClampInRange(0.25f, pValue.Z, 120);
+                    m_linearFrictionTimescale = new Vector3(pValue.X, pValue.Y, pValue.Z);
+                    break;
+                case Vehicle.LINEAR_MOTOR_DIRECTION:
+                    pValue.X = ClampInRange(-BSParam.MaxLinearVelocity, pValue.X, BSParam.MaxLinearVelocity);
+                    pValue.Y = ClampInRange(-BSParam.MaxLinearVelocity, pValue.Y, BSParam.MaxLinearVelocity);
+                    pValue.Z = ClampInRange(-BSParam.MaxLinearVelocity, pValue.Z, BSParam.MaxLinearVelocity);
+                    m_linearMotorDirection = new Vector3(pValue.X, pValue.Y, pValue.Z);
+                    m_linearMotorDirectionLASTSET = new Vector3(pValue.X, pValue.Y, pValue.Z);
+                    m_linearMotor.SetTarget(m_linearMotorDirection);
+                    break;
+                case Vehicle.LINEAR_MOTOR_OFFSET:
+                    // Not sure the correct range to limit this variable
+                    pValue.X = ClampInRange(-1000, pValue.X, 1000);
+                    pValue.Y = ClampInRange(-1000, pValue.Y, 1000);
+                    pValue.Z = ClampInRange(-1000, pValue.Z, 1000);
+                    m_linearMotorOffset = new Vector3(pValue.X, pValue.Y, pValue.Z);
+                    break;
+                case Vehicle.BLOCK_EXIT:
+                    // Not sure the correct range to limit this variable
+                    pValue.X = ClampInRange(-10000, pValue.X, 10000);
+                    pValue.Y = ClampInRange(-10000, pValue.Y, 10000);
+                    pValue.Z = ClampInRange(-10000, pValue.Z, 10000);
+                    m_BlockingEndPoint = new Vector3(pValue.X, pValue.Y, pValue.Z);
+                    break;
+            }
+        }//end ProcessVectorVehicleParam
+
+        internal void ProcessRotationVehicleParam(Vehicle pParam, Quaternion pValue)
+        {
+            VDetailLog("{0},ProcessRotationalVehicleParam,param={1},val={2}", ControllingPrim.LocalID, pParam, pValue);
+            switch (pParam)
+            {
+                case Vehicle.REFERENCE_FRAME:
+                    m_referenceFrame = pValue;
+                    break;
+                case Vehicle.ROLL_FRAME:
+                    m_RollreferenceFrame = pValue;
+                    break;
+            }
+        }//end ProcessRotationVehicleParam
+
+        internal void ProcessVehicleFlags(int pParam, bool remove)
+        {
+            VDetailLog("{0},ProcessVehicleFlags,param={1},remove={2}", ControllingPrim.LocalID, pParam, remove);
+            VehicleFlag parm = (VehicleFlag)pParam;
+            if (pParam == -1)
+                m_flags = (VehicleFlag)0;
+            else
+            {
+                if (remove)
+                    m_flags &= ~parm;
+                else
+                    m_flags |= parm;
+            }
+        }
+
+        public void ProcessTypeChange(Vehicle pType)
+        {
+            VDetailLog("{0},ProcessTypeChange,type={1}", ControllingPrim.LocalID, pType);
+            // Set Defaults For Type
+            Type = pType;
+            switch (pType)
+            {
+                case Vehicle.TYPE_NONE:
+                    m_linearMotorDirection = Vector3.Zero;
+                    m_linearMotorTimescale = 0;
+                    m_linearMotorDecayTimescale = 0;
+                    m_linearFrictionTimescale = new Vector3(0, 0, 0);
+
+                    m_angularMotorDirection = Vector3.Zero;
+                    m_angularMotorDecayTimescale = 0;
+                    m_angularMotorTimescale = 0;
+                    m_angularFrictionTimescale = new Vector3(0, 0, 0);
+
+                    m_VhoverHeight = 0;
+                    m_VhoverEfficiency = 0;
+                    m_VhoverTimescale = 0;
+                    m_VehicleBuoyancy = 0;
+
+                    m_linearDeflectionEfficiency = 1;
+                    m_linearDeflectionTimescale = 1;
+
+                    m_angularDeflectionEfficiency = 0;
+                    m_angularDeflectionTimescale = 1000;
+
+                    m_verticalAttractionEfficiency = 0;
+                    m_verticalAttractionTimescale = 0;
+
+                    m_bankingEfficiency = 0;
+                    m_bankingTimescale = 1000;
+                    m_bankingMix = 1;
+
+                    m_referenceFrame = Quaternion.Identity;
+                    m_flags = (VehicleFlag)0;
+
+                    break;
+
+                case Vehicle.TYPE_SLED:
+                    m_linearMotorDirection = Vector3.Zero;
+                    m_linearMotorTimescale = 1000;
+                    m_linearMotorDecayTimescale = 120;
+                    m_linearFrictionTimescale = new Vector3(30, 1, 1000);
+
+                    m_angularMotorDirection = Vector3.Zero;
+                    m_angularMotorTimescale = 1000;
+                    m_angularMotorDecayTimescale = 120;
+                    m_angularFrictionTimescale = new Vector3(1000, 1000, 1000);
+
+                    m_VhoverHeight = 0;
+                    m_VhoverEfficiency = 10;    // TODO: this looks wrong!!
+                    m_VhoverTimescale = 10;
+                    m_VehicleBuoyancy = 0;
+
+                    m_linearDeflectionEfficiency = 1;
+                    m_linearDeflectionTimescale = 1;
+
+                    m_angularDeflectionEfficiency = 1;
+                    m_angularDeflectionTimescale = 1000;
+
+                    m_verticalAttractionEfficiency = 0;
+                    m_verticalAttractionTimescale = 0;
+
+                    m_bankingEfficiency = 0;
+                    m_bankingTimescale = 10;
+                    m_bankingMix = 1;
+
+                    m_referenceFrame = Quaternion.Identity;
+                    m_flags &= ~(VehicleFlag.HOVER_WATER_ONLY
+                                | VehicleFlag.HOVER_TERRAIN_ONLY
+                                | VehicleFlag.HOVER_GLOBAL_HEIGHT
+                                | VehicleFlag.HOVER_UP_ONLY);
+                    m_flags |= (VehicleFlag.NO_DEFLECTION_UP
+                            | VehicleFlag.LIMIT_ROLL_ONLY
+                            | VehicleFlag.LIMIT_MOTOR_UP);
+
+                    break;
+                case Vehicle.TYPE_CAR:
+                    m_linearMotorDirection = Vector3.Zero;
+                    m_linearMotorTimescale = 1;
+                    m_linearMotorDecayTimescale = 60;
+                    m_linearFrictionTimescale = new Vector3(100, 2, 1000);
+
+                    m_angularMotorDirection = Vector3.Zero;
+                    m_angularMotorTimescale = 1;
+                    m_angularMotorDecayTimescale = 0.8f;
+                    m_angularFrictionTimescale = new Vector3(1000, 1000, 1000);
+
+                    m_VhoverHeight = 0;
+                    m_VhoverEfficiency = 0;
+                    m_VhoverTimescale = 1000;
+                    m_VehicleBuoyancy = 0;
+
+                    m_linearDeflectionEfficiency = 1;
+                    m_linearDeflectionTimescale = 2;
+
+                    m_angularDeflectionEfficiency = 0;
+                    m_angularDeflectionTimescale = 10;
+
+                    m_verticalAttractionEfficiency = 1f;
+                    m_verticalAttractionTimescale = 10f;
+
+                    m_bankingEfficiency = -0.2f;
+                    m_bankingMix = 1;
+                    m_bankingTimescale = 1;
+
+                    m_referenceFrame = Quaternion.Identity;
+                    m_flags &= ~(VehicleFlag.HOVER_WATER_ONLY
+                                | VehicleFlag.HOVER_TERRAIN_ONLY
+                                | VehicleFlag.HOVER_GLOBAL_HEIGHT);
+                    m_flags |= (VehicleFlag.NO_DEFLECTION_UP
+                                | VehicleFlag.LIMIT_ROLL_ONLY
+                                | VehicleFlag.LIMIT_MOTOR_UP
+                                | VehicleFlag.HOVER_UP_ONLY);
+                    break;
+                case Vehicle.TYPE_BOAT:
+                    m_linearMotorDirection = Vector3.Zero;
+                    m_linearMotorTimescale = 5;
+                    m_linearMotorDecayTimescale = 60;
+                    m_linearFrictionTimescale = new Vector3(10, 3, 2);
+
+                    m_angularMotorDirection = Vector3.Zero;
+                    m_angularMotorTimescale = 4;
+                    m_angularMotorDecayTimescale = 4;
+                    m_angularFrictionTimescale = new Vector3(10,10,10);
+
+                    m_VhoverHeight = 0;
+                    m_VhoverEfficiency = 0.5f;
+                    m_VhoverTimescale = 2;
+                    m_VehicleBuoyancy = 1;
+
+                    m_linearDeflectionEfficiency = 0.5f;
+                    m_linearDeflectionTimescale = 3;
+
+                    m_angularDeflectionEfficiency = 0.5f;
+                    m_angularDeflectionTimescale = 5;
+
+                    m_verticalAttractionEfficiency = 0.5f;
+                    m_verticalAttractionTimescale = 5f;
+
+                    m_bankingEfficiency = -0.3f;
+                    m_bankingMix = 0.8f;
+                    m_bankingTimescale = 1;
+
+                    m_referenceFrame = Quaternion.Identity;
+                    m_flags &= ~(VehicleFlag.HOVER_TERRAIN_ONLY
+                                    | VehicleFlag.HOVER_GLOBAL_HEIGHT
+                                    | VehicleFlag.LIMIT_ROLL_ONLY
+                                    | VehicleFlag.HOVER_UP_ONLY);
+                    m_flags |= (VehicleFlag.NO_DEFLECTION_UP
+                                    | VehicleFlag.LIMIT_MOTOR_UP
+                                    | VehicleFlag.HOVER_WATER_ONLY);
+                    break;
+                case Vehicle.TYPE_AIRPLANE:
+                    m_linearMotorDirection = Vector3.Zero;
+                    m_linearMotorTimescale = 2;
+                    m_linearMotorDecayTimescale = 60;
+                    m_linearFrictionTimescale = new Vector3(200, 10, 5);
+
+                    m_angularMotorDirection = Vector3.Zero;
+                    m_angularMotorTimescale = 4;
+                    m_angularMotorDecayTimescale = 4;
+                    m_angularFrictionTimescale = new Vector3(20, 20, 20);
+
+                    m_VhoverHeight = 0;
+                    m_VhoverEfficiency = 0.5f;
+                    m_VhoverTimescale = 1000;
+                    m_VehicleBuoyancy = 0;
+
+                    m_linearDeflectionEfficiency = 0.5f;
+                    m_linearDeflectionTimescale = 3;
+
+                    m_angularDeflectionEfficiency = 1;
+                    m_angularDeflectionTimescale = 2;
+
+                    m_verticalAttractionEfficiency = 0.9f;
+                    m_verticalAttractionTimescale = 2f;
+
+                    m_bankingEfficiency = 1;
+                    m_bankingMix = 0.7f;
+                    m_bankingTimescale = 2;
+
+                    m_referenceFrame = Quaternion.Identity;
+                    m_flags &= ~(VehicleFlag.HOVER_WATER_ONLY
+                                    | VehicleFlag.HOVER_TERRAIN_ONLY
+                                    | VehicleFlag.HOVER_GLOBAL_HEIGHT
+                                    | VehicleFlag.HOVER_UP_ONLY
+                                    | VehicleFlag.NO_DEFLECTION_UP
+                                    | VehicleFlag.LIMIT_MOTOR_UP);
+                    m_flags |= (VehicleFlag.LIMIT_ROLL_ONLY);
+                    break;
+                case Vehicle.TYPE_BALLOON:
+                    m_linearMotorDirection = Vector3.Zero;
+                    m_linearMotorTimescale = 5;
+                    m_linearFrictionTimescale = new Vector3(5, 5, 5);
+                    m_linearMotorDecayTimescale = 60;
+
+                    m_angularMotorDirection = Vector3.Zero;
+                    m_angularMotorTimescale = 6;
+                    m_angularFrictionTimescale = new Vector3(10, 10, 10);
+                    m_angularMotorDecayTimescale = 10;
+
+                    m_VhoverHeight = 5;
+                    m_VhoverEfficiency = 0.8f;
+                    m_VhoverTimescale = 10;
+                    m_VehicleBuoyancy = 1;
+
+                    m_linearDeflectionEfficiency = 0;
+                    m_linearDeflectionTimescale = 5;
+
+                    m_angularDeflectionEfficiency = 0;
+                    m_angularDeflectionTimescale = 5;
+
+                    m_verticalAttractionEfficiency = 1f;
+                    m_verticalAttractionTimescale = 100f;
+
+                    m_bankingEfficiency = 0;
+                    m_bankingMix = 0.7f;
+                    m_bankingTimescale = 5;
+
+                    m_referenceFrame = Quaternion.Identity;
+
+                    m_referenceFrame = Quaternion.Identity;
+                    m_flags &= ~(VehicleFlag.HOVER_WATER_ONLY
+                                    | VehicleFlag.HOVER_TERRAIN_ONLY
+                                    | VehicleFlag.HOVER_UP_ONLY
+                                    | VehicleFlag.NO_DEFLECTION_UP
+                                    | VehicleFlag.LIMIT_MOTOR_UP);
+                    m_flags |= (VehicleFlag.LIMIT_ROLL_ONLY
+                                    | VehicleFlag.HOVER_GLOBAL_HEIGHT);
+                    break;
+            }
+
+            m_linearMotor = new BSVMotor("LinearMotor", m_linearMotorTimescale, m_linearMotorDecayTimescale, 1f);
+            // m_linearMotor.PhysicsScene = m_physicsScene;  // DEBUG DEBUG DEBUG (enables detail logging)
+
+            m_angularMotor = new BSVMotor("AngularMotor", m_angularMotorTimescale, m_angularMotorDecayTimescale, 1f);
+            // m_angularMotor.PhysicsScene = m_physicsScene;  // DEBUG DEBUG DEBUG (enables detail logging)
+
+            /*  Not implemented
+            m_verticalAttractionMotor = new BSVMotor("VerticalAttraction", m_verticalAttractionTimescale,
+                                BSMotor.Infinite, BSMotor.InfiniteVector,
+                                m_verticalAttractionEfficiency);
+            // Z goes away and we keep X and Y
+            m_verticalAttractionMotor.PhysicsScene = PhysicsScene;  // DEBUG DEBUG DEBUG (enables detail logging)
+             */
+
+            if (this.Type == Vehicle.TYPE_NONE)
+            {
+                UnregisterForSceneEvents();
+            }
+            else
+            {
+                RegisterForSceneEvents();
+            }
+
+            // Update any physical parameters based on this type.
+            Refresh();
+        }
+        #endregion // Vehicle parameter setting
+
+        // BSActor.Refresh()
+        public override void Refresh()
+        {
+            // If asking for a refresh, reset the physical parameters before the next simulation step.
+            // Called whether active or not since the active state may be updated before the next step.
+            m_physicsScene.PostTaintObject("BSDynamics.Refresh", ControllingPrim.LocalID, delegate()
+            {
+                SetPhysicalParameters();
+            });
+        }
+
+        // Some of the properties of this prim may have changed.
+        // Do any updating needed for a vehicle
+        private void SetPhysicalParameters()
+        {
+            if (IsActive)
+            {
+                // Remember the mass so we don't have to fetch it every step
+                m_vehicleMass = ControllingPrim.TotalMass;
+
+                // Friction affects are handled by this vehicle code
+                // m_physicsScene.PE.SetFriction(ControllingPrim.PhysBody, BSParam.VehicleFriction);
+                // m_physicsScene.PE.SetRestitution(ControllingPrim.PhysBody, BSParam.VehicleRestitution);
+                ControllingPrim.Linkset.SetPhysicalFriction(BSParam.VehicleFriction);
+                ControllingPrim.Linkset.SetPhysicalRestitution(BSParam.VehicleRestitution);
+
+                // Moderate angular movement introduced by Bullet.
+                // TODO: possibly set AngularFactor and LinearFactor for the type of vehicle.
+                //     Maybe compute linear and angular factor and damping from params.
+                m_physicsScene.PE.SetAngularDamping(ControllingPrim.PhysBody, BSParam.VehicleAngularDamping);
+                m_physicsScene.PE.SetLinearFactor(ControllingPrim.PhysBody, BSParam.VehicleLinearFactor);
+                m_physicsScene.PE.SetAngularFactorV(ControllingPrim.PhysBody, BSParam.VehicleAngularFactor);
+
+                // Vehicles report collision events so we know when it's on the ground
+                // m_physicsScene.PE.AddToCollisionFlags(ControllingPrim.PhysBody, CollisionFlags.BS_VEHICLE_COLLISIONS);
+                ControllingPrim.Linkset.AddToPhysicalCollisionFlags(CollisionFlags.BS_VEHICLE_COLLISIONS);
+
+                // Vector3 inertia = m_physicsScene.PE.CalculateLocalInertia(ControllingPrim.PhysShape.physShapeInfo, m_vehicleMass);
+                // ControllingPrim.Inertia = inertia * BSParam.VehicleInertiaFactor;
+                // m_physicsScene.PE.SetMassProps(ControllingPrim.PhysBody, m_vehicleMass, ControllingPrim.Inertia);
+                // m_physicsScene.PE.UpdateInertiaTensor(ControllingPrim.PhysBody);
+                ControllingPrim.Linkset.ComputeAndSetLocalInertia(BSParam.VehicleInertiaFactor, m_vehicleMass);
+
+                // Set the gravity for the vehicle depending on the buoyancy
+                // TODO: what should be done if prim and vehicle buoyancy differ?
+                m_VehicleGravity = ControllingPrim.ComputeGravity(m_VehicleBuoyancy);
+                // The actual vehicle gravity is set to zero in Bullet so we can do all the application of same.
+                // m_physicsScene.PE.SetGravity(ControllingPrim.PhysBody, Vector3.Zero);
+                ControllingPrim.Linkset.SetPhysicalGravity(Vector3.Zero);
+
+                VDetailLog("{0},BSDynamics.SetPhysicalParameters,mass={1},inert={2},vehGrav={3},aDamp={4},frict={5},rest={6},lFact={7},aFact={8}",
+                        ControllingPrim.LocalID, m_vehicleMass, ControllingPrim.Inertia, m_VehicleGravity,
+                        BSParam.VehicleAngularDamping, BSParam.VehicleFriction, BSParam.VehicleRestitution,
+                        BSParam.VehicleLinearFactor, BSParam.VehicleAngularFactor
+                        );
+            }
+            else
+            {
+                if (ControllingPrim.PhysBody.HasPhysicalBody)
+                    m_physicsScene.PE.RemoveFromCollisionFlags(ControllingPrim.PhysBody, CollisionFlags.BS_VEHICLE_COLLISIONS);
+                // ControllingPrim.Linkset.RemoveFromPhysicalCollisionFlags(CollisionFlags.BS_VEHICLE_COLLISIONS);
+            }
+        }
+
+        // BSActor.RemoveBodyDependencies
+        public override void RemoveDependencies()
+        {
+            Refresh();
+        }
+
+        // BSActor.Release()
+        public override void Dispose()
+        {
+            VDetailLog("{0},Dispose", ControllingPrim.LocalID);
+            UnregisterForSceneEvents();
+            Type = Vehicle.TYPE_NONE;
+            Enabled = false;
+            return;
+        }
+
+        private void RegisterForSceneEvents()
+        {
+            if (!m_haveRegisteredForSceneEvents)
+            {
+                m_physicsScene.BeforeStep += this.Step;
+                m_physicsScene.AfterStep += this.PostStep;
+                ControllingPrim.OnPreUpdateProperty += this.PreUpdateProperty;
+                m_haveRegisteredForSceneEvents = true;
+            }
+        }
+
+        private void UnregisterForSceneEvents()
+        {
+            if (m_haveRegisteredForSceneEvents)
+            {
+                m_physicsScene.BeforeStep -= this.Step;
+                m_physicsScene.AfterStep -= this.PostStep;
+                ControllingPrim.OnPreUpdateProperty -= this.PreUpdateProperty;
+                m_haveRegisteredForSceneEvents = false;
+            }
+        }
+
+        private void PreUpdateProperty(ref EntityProperties entprop)
+        {
+            // A temporary kludge to suppress the rotational effects introduced on vehicles by Bullet
+            // TODO: handle physics introduced by Bullet with computed vehicle physics.
+            if (IsActive)
+            {
+                entprop.RotationalVelocity = Vector3.Zero;
+            }
+        }
+
+        #region Known vehicle value functions
+        // Vehicle physical parameters that we buffer from constant getting and setting.
+        // The "m_known*" values are unknown until they are fetched and the m_knownHas flag is set.
+        //      Changing is remembered and the parameter is stored back into the physics engine only if updated.
+        //      This does two things: 1) saves continuious calls into unmanaged code, and
+        //      2) signals when a physics property update must happen back to the simulator
+        //      to update values modified for the vehicle.
+        private int m_knownChanged;
+        private int m_knownHas;
+        private float m_knownTerrainHeight;
+        private float m_knownWaterLevel;
+        private Vector3 m_knownPosition;
+        private Vector3 m_knownVelocity;
+        private Vector3 m_knownForce;
+        private Vector3 m_knownForceImpulse;
+        private Quaternion m_knownOrientation;
+        private Vector3 m_knownRotationalVelocity;
+        private Vector3 m_knownRotationalForce;
+        private Vector3 m_knownRotationalImpulse;
+
+        private const int m_knownChangedPosition           = 1 << 0;
+        private const int m_knownChangedVelocity           = 1 << 1;
+        private const int m_knownChangedForce              = 1 << 2;
+        private const int m_knownChangedForceImpulse       = 1 << 3;
+        private const int m_knownChangedOrientation        = 1 << 4;
+        private const int m_knownChangedRotationalVelocity = 1 << 5;
+        private const int m_knownChangedRotationalForce    = 1 << 6;
+        private const int m_knownChangedRotationalImpulse  = 1 << 7;
+        private const int m_knownChangedTerrainHeight      = 1 << 8;
+        private const int m_knownChangedWaterLevel         = 1 << 9;
+
+        public void ForgetKnownVehicleProperties()
+        {
+            m_knownHas = 0;
+            m_knownChanged = 0;
+        }
+        // Push all the changed values back into the physics engine
+        public void PushKnownChanged()
+        {
+            if (m_knownChanged != 0)
+            {
+                if ((m_knownChanged & m_knownChangedPosition) != 0)
+                    ControllingPrim.ForcePosition = m_knownPosition;
+
+                if ((m_knownChanged & m_knownChangedOrientation) != 0)
+                    ControllingPrim.ForceOrientation = m_knownOrientation;
+
+                if ((m_knownChanged & m_knownChangedVelocity) != 0)
+                {
+                    ControllingPrim.ForceVelocity = m_knownVelocity;
+                    // Fake out Bullet by making it think the velocity is the same as last time.
+                    // Bullet does a bunch of smoothing for changing parameters.
+                    //    Since the vehicle is demanding this setting, we override Bullet's smoothing
+                    //    by telling Bullet the value was the same last time.
+                    // PhysicsScene.PE.SetInterpolationLinearVelocity(Prim.PhysBody, m_knownVelocity);
+                }
+
+                if ((m_knownChanged & m_knownChangedForce) != 0)
+                    ControllingPrim.AddForce((Vector3)m_knownForce, false /*pushForce*/, true /*inTaintTime*/);
+
+                if ((m_knownChanged & m_knownChangedForceImpulse) != 0)
+                    ControllingPrim.AddForceImpulse((Vector3)m_knownForceImpulse, false /*pushforce*/, true /*inTaintTime*/);
+
+                if ((m_knownChanged & m_knownChangedRotationalVelocity) != 0)
+                {
+                    ControllingPrim.ForceRotationalVelocity = m_knownRotationalVelocity;
+                    // PhysicsScene.PE.SetInterpolationAngularVelocity(Prim.PhysBody, m_knownRotationalVelocity);
+                }
+
+                if ((m_knownChanged & m_knownChangedRotationalImpulse) != 0)
+                    ControllingPrim.ApplyTorqueImpulse((Vector3)m_knownRotationalImpulse, true /*inTaintTime*/);
+
+                if ((m_knownChanged & m_knownChangedRotationalForce) != 0)
+                {
+                    ControllingPrim.AddAngularForce((Vector3)m_knownRotationalForce, false /*pushForce*/, true /*inTaintTime*/);
+                }
+
+                // If we set one of the values (ie, the physics engine didn't do it) we must force
+                //      an UpdateProperties event to send the changes up to the simulator.
+                m_physicsScene.PE.PushUpdate(ControllingPrim.PhysBody);
+            }
+            m_knownChanged = 0;
+        }
+
+        // Since the computation of terrain height can be a little involved, this routine
+        //    is used to fetch the height only once for each vehicle simulation step.
+        Vector3 lastRememberedHeightPos = new Vector3(-1, -1, -1);
+        private float GetTerrainHeight(Vector3 pos)
+        {
+            if ((m_knownHas & m_knownChangedTerrainHeight) == 0 || pos != lastRememberedHeightPos)
+            {
+                lastRememberedHeightPos = pos;
+                m_knownTerrainHeight = ControllingPrim.PhysScene.TerrainManager.GetTerrainHeightAtXYZ(pos);
+                m_knownHas |= m_knownChangedTerrainHeight;
+            }
+            return m_knownTerrainHeight;
+        }
+
+        // Since the computation of water level can be a little involved, this routine
+        //    is used ot fetch the level only once for each vehicle simulation step.
+        Vector3 lastRememberedWaterHeightPos = new Vector3(-1, -1, -1);
+        private float GetWaterLevel(Vector3 pos)
+        {
+            if ((m_knownHas & m_knownChangedWaterLevel) == 0 || pos != lastRememberedWaterHeightPos)
+            {
+                lastRememberedWaterHeightPos = pos;
+                m_knownWaterLevel = ControllingPrim.PhysScene.TerrainManager.GetWaterLevelAtXYZ(pos);
+                m_knownHas |= m_knownChangedWaterLevel;
+            }
+            return m_knownWaterLevel;
+        }
+
+        private Vector3 VehiclePosition
+        {
+            get
+            {
+                if ((m_knownHas & m_knownChangedPosition) == 0)
+                {
+                    m_knownPosition = ControllingPrim.ForcePosition;
+                    m_knownHas |= m_knownChangedPosition;
+                }
+                return m_knownPosition;
+            }
+            set
+            {
+                m_knownPosition = value;
+                m_knownChanged |= m_knownChangedPosition;
+                m_knownHas |= m_knownChangedPosition;
+            }
+        }
+
+        private Quaternion VehicleOrientation
+        {
+            get
+            {
+                if ((m_knownHas & m_knownChangedOrientation) == 0)
+                {
+                    m_knownOrientation = ControllingPrim.ForceOrientation;
+                    m_knownHas |= m_knownChangedOrientation;
+                }
+                return m_knownOrientation;
+            }
+            set
+            {
+                m_knownOrientation = value;
+                m_knownChanged |= m_knownChangedOrientation;
+                m_knownHas |= m_knownChangedOrientation;
+            }
+        }
+
+        private Vector3 VehicleVelocity
+        {
+            get
+            {
+                if ((m_knownHas & m_knownChangedVelocity) == 0)
+                {
+                    m_knownVelocity = ControllingPrim.ForceVelocity;
+                    m_knownHas |= m_knownChangedVelocity;
+                }
+                return m_knownVelocity;
+            }
+            set
+            {
+                m_knownVelocity = value;
+                m_knownChanged |= m_knownChangedVelocity;
+                m_knownHas |= m_knownChangedVelocity;
+            }
+        }
+
+        private void VehicleAddForce(Vector3 pForce)
+        {
+            if ((m_knownHas & m_knownChangedForce) == 0)
+            {
+                m_knownForce = Vector3.Zero;
+                m_knownHas |= m_knownChangedForce;
+            }
+            m_knownForce += pForce;
+            m_knownChanged |= m_knownChangedForce;
+        }
+
+        private void VehicleAddForceImpulse(Vector3 pImpulse)
+        {
+            if ((m_knownHas & m_knownChangedForceImpulse) == 0)
+            {
+                m_knownForceImpulse = Vector3.Zero;
+                m_knownHas |= m_knownChangedForceImpulse;
+            }
+            m_knownForceImpulse += pImpulse;
+            m_knownChanged |= m_knownChangedForceImpulse;
+        }
+
+        private Vector3 VehicleRotationalVelocity
+        {
+            get
+            {
+                if ((m_knownHas & m_knownChangedRotationalVelocity) == 0)
+                {
+                    m_knownRotationalVelocity = ControllingPrim.ForceRotationalVelocity;
+                    m_knownHas |= m_knownChangedRotationalVelocity;
+                }
+                return (Vector3)m_knownRotationalVelocity;
+            }
+            set
+            {
+                m_knownRotationalVelocity = value;
+                m_knownChanged |= m_knownChangedRotationalVelocity;
+                m_knownHas |= m_knownChangedRotationalVelocity;
+            }
+        }
+        private void VehicleAddAngularForce(Vector3 aForce)
+        {
+            if ((m_knownHas & m_knownChangedRotationalForce) == 0)
+            {
+                m_knownRotationalForce = Vector3.Zero;
+            }
+            m_knownRotationalForce += aForce;
+            m_knownChanged |= m_knownChangedRotationalForce;
+            m_knownHas |= m_knownChangedRotationalForce;
+        }
+        private void VehicleAddRotationalImpulse(Vector3 pImpulse)
+        {
+            if ((m_knownHas & m_knownChangedRotationalImpulse) == 0)
+            {
+                m_knownRotationalImpulse = Vector3.Zero;
+                m_knownHas |= m_knownChangedRotationalImpulse;
+            }
+            m_knownRotationalImpulse += pImpulse;
+            m_knownChanged |= m_knownChangedRotationalImpulse;
+        }
+
+        // Vehicle relative forward velocity
+        private Vector3 VehicleForwardVelocity
+        {
+            get
+            {
+                return VehicleVelocity * Quaternion.Inverse(Quaternion.Normalize(VehicleFrameOrientation));
+            }
+        }
+
+        private float VehicleForwardSpeed
+        {
+            get
+            {
+                return VehicleForwardVelocity.X;
+            }
+        }
+        private Quaternion VehicleFrameOrientation
+        {
+            get
+            {
+                return VehicleOrientation * m_referenceFrame;
+            }
+        }
+
+        #endregion // Known vehicle value functions
+
+        // One step of the vehicle properties for the next 'pTimestep' seconds.
+        internal void Step(float pTimestep)
+        {
+            if (!IsActive) return;
+
+            ForgetKnownVehicleProperties();
+
+            MoveLinear(pTimestep);
+            MoveAngular(pTimestep);
+
+            LimitRotation(pTimestep);
+
+            // remember the position so next step we can limit absolute movement effects
+            m_lastPositionVector = VehiclePosition;
+
+            // If we forced the changing of some vehicle parameters, update the values and
+            //      for the physics engine to note the changes so an UpdateProperties event will happen.
+            PushKnownChanged();
+
+            if (m_physicsScene.VehiclePhysicalLoggingEnabled)
+                m_physicsScene.PE.DumpRigidBody(m_physicsScene.World, ControllingPrim.PhysBody);
+
+            VDetailLog("{0},BSDynamics.Step,done,pos={1}, force={2},velocity={3},angvel={4}",
+                    ControllingPrim.LocalID, VehiclePosition, m_knownForce, VehicleVelocity, VehicleRotationalVelocity);
+        }
+
+        // Called after the simulation step
+        internal void PostStep(float pTimestep)
+        {
+            if (!IsActive) return;
+
+            if (m_physicsScene.VehiclePhysicalLoggingEnabled)
+                m_physicsScene.PE.DumpRigidBody(m_physicsScene.World, ControllingPrim.PhysBody);
+        }
+
+        // Apply the effect of the linear motor and other linear motions (like hover and float).
+        private void MoveLinear(float pTimestep)
+        {
+            ComputeLinearVelocity(pTimestep);
+
+            ComputeLinearDeflection(pTimestep);
+
+            ComputeLinearTerrainHeightCorrection(pTimestep);
+
+            ComputeLinearHover(pTimestep);
+
+            ComputeLinearBlockingEndPoint(pTimestep);
+
+            ComputeLinearMotorUp(pTimestep);
+
+            ApplyGravity(pTimestep);
+
+            // If not changing some axis, reduce out velocity
+            if ((m_flags & (VehicleFlag.NO_X | VehicleFlag.NO_Y | VehicleFlag.NO_Z)) != 0)
+            {
+                Vector3 vel = VehicleVelocity;
+                if ((m_flags & (VehicleFlag.NO_X)) != 0)
+                {
+                    vel.X = 0;
+                }
+                if ((m_flags & (VehicleFlag.NO_Y)) != 0)
+                {
+                    vel.Y = 0;
+                }
+                if ((m_flags & (VehicleFlag.NO_Z)) != 0)
+                {
+                    vel.Z = 0;
+                }
+                VehicleVelocity = vel;
+            }
+
+            // ==================================================================
+            // Clamp high or low velocities
+            float newVelocityLengthSq = VehicleVelocity.LengthSquared();
+            if (newVelocityLengthSq > BSParam.VehicleMaxLinearVelocitySquared)
+            {
+                Vector3 origVelW = VehicleVelocity;         // DEBUG DEBUG
+                VehicleVelocity /= VehicleVelocity.Length();
+                VehicleVelocity *= BSParam.VehicleMaxLinearVelocity;
+                VDetailLog("{0},  MoveLinear,clampMax,origVelW={1},lenSq={2},maxVelSq={3},,newVelW={4}",
+                            ControllingPrim.LocalID, origVelW, newVelocityLengthSq, BSParam.VehicleMaxLinearVelocitySquared, VehicleVelocity);
+            }
+            else if (newVelocityLengthSq < BSParam.VehicleMinLinearVelocitySquared)
+            {
+                Vector3 origVelW = VehicleVelocity;         // DEBUG DEBUG
+                VDetailLog("{0},  MoveLinear,clampMin,origVelW={1},lenSq={2}",
+                            ControllingPrim.LocalID, origVelW, newVelocityLengthSq);
+                VehicleVelocity = Vector3.Zero;
+            }
+
+            VDetailLog("{0},  MoveLinear,done,isColl={1},newVel={2}", ControllingPrim.LocalID, ControllingPrim.HasSomeCollision, VehicleVelocity );
+
+        } // end MoveLinear()
+
+        public void ComputeLinearVelocity(float pTimestep)
+        {
+            // Step the motor from the current value. Get the correction needed this step.
+            Vector3 origVelW = VehicleVelocity;             // DEBUG
+            Vector3 currentVelV = VehicleForwardVelocity;
+            Vector3 linearMotorCorrectionV = m_linearMotor.Step(pTimestep, currentVelV);
+
+            // Friction reduces vehicle motion based on absolute speed. Slow vehicle down by friction.
+            Vector3 frictionFactorV = ComputeFrictionFactor(m_linearFrictionTimescale, pTimestep);
+            linearMotorCorrectionV -= (currentVelV * frictionFactorV);
+
+            // Motor is vehicle coordinates. Rotate it to world coordinates
+            Vector3 linearMotorVelocityW = linearMotorCorrectionV * VehicleFrameOrientation;
+
+            // If we're a ground vehicle, don't add any upward Z movement
+            if ((m_flags & VehicleFlag.LIMIT_MOTOR_UP) != 0)
+            {
+                if (linearMotorVelocityW.Z > 0f)
+                    linearMotorVelocityW.Z = 0f;
+            }
+
+            // Add this correction to the velocity to make it faster/slower.
+            VehicleVelocity += linearMotorVelocityW;
+
+            VDetailLog("{0},  MoveLinear,velocity,origVelW={1},velV={2},tgt={3},correctV={4},correctW={5},newVelW={6},fricFact={7}",
+                        ControllingPrim.LocalID, origVelW, currentVelV, m_linearMotor.TargetValue, linearMotorCorrectionV,
+                        linearMotorVelocityW, VehicleVelocity, frictionFactorV);
+        }
+
+        //Given a Deflection Effiency and a Velocity, Returns a Velocity that is Partially Deflected onto the X Axis
+        //Clamped so that a DeflectionTimescale of less then 1 does not increase force over original velocity
+        private void ComputeLinearDeflection(float pTimestep)
+        {
+            Vector3 linearDeflectionV = Vector3.Zero;
+            Vector3 velocityV = VehicleForwardVelocity;
+
+            if (BSParam.VehicleEnableLinearDeflection)
+            {
+                // Velocity in Y and Z dimensions is movement to the side or turning.
+                // Compute deflection factor from the to the side and rotational velocity
+                linearDeflectionV.Y = SortedClampInRange(0, (velocityV.Y * m_linearDeflectionEfficiency) / m_linearDeflectionTimescale, velocityV.Y);
+                linearDeflectionV.Z = SortedClampInRange(0, (velocityV.Z * m_linearDeflectionEfficiency) / m_linearDeflectionTimescale, velocityV.Z);
+
+                // Velocity to the side and around is corrected and moved into the forward direction
+                linearDeflectionV.X += Math.Abs(linearDeflectionV.Y);
+                linearDeflectionV.X += Math.Abs(linearDeflectionV.Z);
+
+                // Scale the deflection to the fractional simulation time
+                linearDeflectionV *= pTimestep;
+
+                // Subtract the sideways and rotational velocity deflection factors while adding the correction forward
+                linearDeflectionV *= new Vector3(1, -1, -1);
+
+                // Correction is vehicle relative. Convert to world coordinates.
+                Vector3 linearDeflectionW = linearDeflectionV * VehicleFrameOrientation;
+
+                // Optionally, if not colliding, don't effect world downward velocity. Let falling things fall.
+                if (BSParam.VehicleLinearDeflectionNotCollidingNoZ && !m_controllingPrim.HasSomeCollision)
+                {
+                    linearDeflectionW.Z = 0f;
+                }
+
+                VehicleVelocity += linearDeflectionW;
+
+                VDetailLog("{0},  MoveLinear,LinearDeflection,linDefEff={1},linDefTS={2},linDeflectionV={3}",
+                            ControllingPrim.LocalID, m_linearDeflectionEfficiency, m_linearDeflectionTimescale, linearDeflectionV);
+            }
+        }
+
+        public void ComputeLinearTerrainHeightCorrection(float pTimestep)
+        {
+            // If below the terrain, move us above the ground a little.
+            // TODO: Consider taking the rotated size of the object or possibly casting a ray.
+            if (VehiclePosition.Z < GetTerrainHeight(VehiclePosition))
+            {
+                // Force position because applying force won't get the vehicle through the terrain
+                Vector3 newPosition = VehiclePosition;
+                newPosition.Z = GetTerrainHeight(VehiclePosition) + 1f;
+                VehiclePosition = newPosition;
+                VDetailLog("{0},  MoveLinear,terrainHeight,terrainHeight={1},pos={2}",
+                        ControllingPrim.LocalID, GetTerrainHeight(VehiclePosition), VehiclePosition);
+            }
+        }
+
+        public void ComputeLinearHover(float pTimestep)
+        {
+            // m_VhoverEfficiency: 0=bouncy, 1=totally damped
+            // m_VhoverTimescale: time to achieve height
+            if ((m_flags & (VehicleFlag.HOVER_WATER_ONLY | VehicleFlag.HOVER_TERRAIN_ONLY | VehicleFlag.HOVER_GLOBAL_HEIGHT)) != 0 && (m_VhoverHeight > 0) && (m_VhoverTimescale < 300))
+            {
+                // We should hover, get the target height
+                if ((m_flags & VehicleFlag.HOVER_WATER_ONLY) != 0)
+                {
+                    m_VhoverTargetHeight = GetWaterLevel(VehiclePosition) + m_VhoverHeight;
+                }
+                if ((m_flags & VehicleFlag.HOVER_TERRAIN_ONLY) != 0)
+                {
+                    m_VhoverTargetHeight = GetTerrainHeight(VehiclePosition) + m_VhoverHeight;
+                }
+                if ((m_flags & VehicleFlag.HOVER_GLOBAL_HEIGHT) != 0)
+                {
+                    m_VhoverTargetHeight = m_VhoverHeight;
+                }
+                if ((m_flags & VehicleFlag.HOVER_UP_ONLY) != 0)
+                {
+                    // If body is already heigher, use its height as target height
+                    if (VehiclePosition.Z > m_VhoverTargetHeight)
+                    {
+                        m_VhoverTargetHeight = VehiclePosition.Z;
+
+                        // A 'misfeature' of this flag is that if the vehicle is above it's hover height,
+                        //     the vehicle's buoyancy goes away. This is an SL bug that got used by so many
+                        //    scripts that it could not be changed.
+                        // So, if above the height, reapply gravity if buoyancy had it turned off.
+                        if (m_VehicleBuoyancy != 0)
+                        {
+                            Vector3 appliedGravity = ControllingPrim.ComputeGravity(ControllingPrim.Buoyancy) * m_vehicleMass;
+                            VehicleAddForce(appliedGravity);
+                        }
+                    }
+                }
+
+                if ((m_flags & VehicleFlag.LOCK_HOVER_HEIGHT) != 0)
+                {
+                    if (Math.Abs(VehiclePosition.Z - m_VhoverTargetHeight) > 0.2f)
+                    {
+                        Vector3 pos = VehiclePosition;
+                        pos.Z = m_VhoverTargetHeight;
+                        VehiclePosition = pos;
+
+                        VDetailLog("{0},  MoveLinear,hover,pos={1},lockHoverHeight", ControllingPrim.LocalID, pos);
+                    }
+                }
+                else
+                {
+                    // Error is positive if below the target and negative if above.
+                    Vector3 hpos = VehiclePosition;
+                    float verticalError = m_VhoverTargetHeight - hpos.Z;
+                    float verticalCorrection = verticalError / m_VhoverTimescale;
+                    verticalCorrection *= m_VhoverEfficiency;
+
+                    hpos.Z += verticalCorrection;
+                    VehiclePosition = hpos;
+
+                    // Since we are hovering, we need to do the opposite of falling -- get rid of world Z
+                    Vector3 vel = VehicleVelocity;
+                    vel.Z = 0f;
+                    VehicleVelocity = vel;
+
+                    /*
+                    float verticalCorrectionVelocity = verticalError / m_VhoverTimescale;
+                    Vector3 verticalCorrection = new Vector3(0f, 0f, verticalCorrectionVelocity);
+                    verticalCorrection *= m_vehicleMass;
+
+                    // TODO: implement m_VhoverEfficiency correctly
+                    VehicleAddForceImpulse(verticalCorrection);
+                     */
+
+                    VDetailLog("{0},  MoveLinear,hover,pos={1},eff={2},hoverTS={3},height={4},target={5},err={6},corr={7}",
+                                    ControllingPrim.LocalID, VehiclePosition, m_VhoverEfficiency,
+                                    m_VhoverTimescale, m_VhoverHeight, m_VhoverTargetHeight,
+                                    verticalError, verticalCorrection);
+                }
+            }
+        }
+
+        public bool ComputeLinearBlockingEndPoint(float pTimestep)
+        {
+            bool changed = false;
+
+            Vector3 pos = VehiclePosition;
+            Vector3 posChange = pos - m_lastPositionVector;
+            if (m_BlockingEndPoint != Vector3.Zero)
+            {
+                if (pos.X >= (m_BlockingEndPoint.X - (float)1))
+                {
+                    pos.X -= posChange.X + 1;
+                    changed = true;
+                }
+                if (pos.Y >= (m_BlockingEndPoint.Y - (float)1))
+                {
+                    pos.Y -= posChange.Y + 1;
+                    changed = true;
+                }
+                if (pos.Z >= (m_BlockingEndPoint.Z - (float)1))
+                {
+                    pos.Z -= posChange.Z + 1;
+                    changed = true;
+                }
+                if (pos.X <= 0)
+                {
+                    pos.X += posChange.X + 1;
+                    changed = true;
+                }
+                if (pos.Y <= 0)
+                {
+                    pos.Y += posChange.Y + 1;
+                    changed = true;
+                }
+                if (changed)
+                {
+                    VehiclePosition = pos;
+                    VDetailLog("{0},  MoveLinear,blockingEndPoint,block={1},origPos={2},pos={3}",
+                                ControllingPrim.LocalID, m_BlockingEndPoint, posChange, pos);
+                }
+            }
+            return changed;
+        }
+
+        // From http://wiki.secondlife.com/wiki/LlSetVehicleFlags :
+        //    Prevent ground vehicles from motoring into the sky. This flag has a subtle effect when
+        //    used with conjunction with banking: the strength of the banking will decay when the
+        //    vehicle no longer experiences collisions. The decay timescale is the same as
+        //    VEHICLE_BANKING_TIMESCALE. This is to help prevent ground vehicles from steering
+        //    when they are in mid jump.
+        // TODO: this code is wrong. Also, what should it do for boats (height from water)?
+        //    This is just using the ground and a general collision check. Should really be using
+        //    a downward raycast to find what is below.
+        public void ComputeLinearMotorUp(float pTimestep)
+        {
+            if ((m_flags & (VehicleFlag.LIMIT_MOTOR_UP)) != 0)
+            {
+                // This code tries to decide if the object is not on the ground and then pushing down
+                /*
+                float targetHeight = Type == Vehicle.TYPE_BOAT ? GetWaterLevel(VehiclePosition) : GetTerrainHeight(VehiclePosition);
+                distanceAboveGround = VehiclePosition.Z - targetHeight;
+                // Not colliding if the vehicle is off the ground
+                if (!Prim.HasSomeCollision)
+                {
+                    // downForce = new Vector3(0, 0, -distanceAboveGround / m_bankingTimescale);
+                    VehicleVelocity += new Vector3(0, 0, -distanceAboveGround);
+                }
+                // TODO: this calculation is wrong. From the description at
+                //     (http://wiki.secondlife.com/wiki/Category:LSL_Vehicle), the downForce
+                //     has a decay factor. This says this force should
+                //     be computed with a motor.
+                // TODO: add interaction with banking.
+                VDetailLog("{0},  MoveLinear,limitMotorUp,distAbove={1},colliding={2},ret={3}",
+                                Prim.LocalID, distanceAboveGround, Prim.HasSomeCollision, ret);
+                 */
+
+                // Another approach is to measure if we're going up. If going up and not colliding,
+                //     the vehicle is in the air.  Fix that by pushing down.
+                if (!ControllingPrim.HasSomeCollision && VehicleVelocity.Z > 0.1)
+                {
+                    // Get rid of any of the velocity vector that is pushing us up.
+                    float upVelocity = VehicleVelocity.Z;
+                    VehicleVelocity += new Vector3(0, 0, -upVelocity);
+
+                    /*
+                    // If we're pointed up into the air, we should nose down
+                    Vector3 pointingDirection = Vector3.UnitX * VehicleOrientation;
+                    // The rotation around the Y axis is pitch up or down
+                    if (pointingDirection.Y > 0.01f)
+                    {
+                        float angularCorrectionForce = -(float)Math.Asin(pointingDirection.Y);
+                        Vector3 angularCorrectionVector = new Vector3(0f, angularCorrectionForce, 0f);
+                        // Rotate into world coordinates and apply to vehicle
+                        angularCorrectionVector *= VehicleOrientation;
+                        VehicleAddAngularForce(angularCorrectionVector);
+                        VDetailLog("{0},  MoveLinear,limitMotorUp,newVel={1},pntDir={2},corrFrc={3},aCorr={4}",
+                                    Prim.LocalID, VehicleVelocity, pointingDirection, angularCorrectionForce, angularCorrectionVector);
+                    }
+                        */
+                    VDetailLog("{0},  MoveLinear,limitMotorUp,collide={1},upVel={2},newVel={3}",
+                                    ControllingPrim.LocalID, ControllingPrim.HasSomeCollision, upVelocity, VehicleVelocity);
+                }
+            }
+        }
+
+        private void ApplyGravity(float pTimeStep)
+        {
+            Vector3 appliedGravity = m_VehicleGravity * m_vehicleMass;
+
+            // Hack to reduce downward force if the vehicle is probably sitting on the ground
+            if (ControllingPrim.HasSomeCollision && IsGroundVehicle)
+                appliedGravity *= BSParam.VehicleGroundGravityFudge;
+
+            VehicleAddForce(appliedGravity);
+
+            VDetailLog("{0},  MoveLinear,applyGravity,vehGrav={1},collid={2},fudge={3},mass={4},appliedForce={5}",
+                            ControllingPrim.LocalID, m_VehicleGravity,
+                            ControllingPrim.HasSomeCollision, BSParam.VehicleGroundGravityFudge, m_vehicleMass, appliedGravity);
+        }
+
+        // =======================================================================
+        // =======================================================================
+        // Apply the effect of the angular motor.
+        // The 'contribution' is how much angular correction velocity each function wants.
+        //     All the contributions are added together and the resulting velocity is
+        //     set directly on the vehicle.
+        private void MoveAngular(float pTimestep)
+        {
+            ComputeAngularTurning(pTimestep);
+
+            ComputeAngularVerticalAttraction();
+
+            ComputeAngularDeflection();
+
+            ComputeAngularBanking();
+
+            // ==================================================================
+            if (VehicleRotationalVelocity.ApproxEquals(Vector3.Zero, 0.0001f))
+            {
+                // The vehicle is not adding anything angular wise.
+                VehicleRotationalVelocity = Vector3.Zero;
+                VDetailLog("{0},  MoveAngular,done,zero", ControllingPrim.LocalID);
+            }
+            else
+            {
+                VDetailLog("{0},  MoveAngular,done,nonZero,angVel={1}", ControllingPrim.LocalID, VehicleRotationalVelocity);
+            }
+
+            // ==================================================================
+            //Offset section
+            if (m_linearMotorOffset != Vector3.Zero)
+            {
+                //Offset of linear velocity doesn't change the linear velocity,
+                //   but causes a torque to be applied, for example...
+                //
+                //      IIIII     >>>   IIIII
+                //      IIIII     >>>    IIIII
+                //      IIIII     >>>     IIIII
+                //          ^
+                //          |  Applying a force at the arrow will cause the object to move forward, but also rotate
+                //
+                //
+                // The torque created is the linear velocity crossed with the offset
+
+                // TODO: this computation should be in the linear section
+                //    because that is where we know the impulse being applied.
+                Vector3 torqueFromOffset = Vector3.Zero;
+                // torqueFromOffset = Vector3.Cross(m_linearMotorOffset, appliedImpulse);
+                if (float.IsNaN(torqueFromOffset.X))
+                    torqueFromOffset.X = 0;
+                if (float.IsNaN(torqueFromOffset.Y))
+                    torqueFromOffset.Y = 0;
+                if (float.IsNaN(torqueFromOffset.Z))
+                    torqueFromOffset.Z = 0;
+
+                VehicleAddAngularForce(torqueFromOffset * m_vehicleMass);
+                VDetailLog("{0},  BSDynamic.MoveAngular,motorOffset,applyTorqueImpulse={1}", ControllingPrim.LocalID, torqueFromOffset);
+            }
+
+        }
+
+        private void ComputeAngularTurning(float pTimestep)
+        {
+            // The user wants this many radians per second angular change?
+            Vector3 origVehicleRotationalVelocity = VehicleRotationalVelocity;      // DEBUG DEBUG
+            Vector3 currentAngularV = VehicleRotationalVelocity * Quaternion.Inverse(VehicleFrameOrientation);
+            Vector3 angularMotorContributionV = m_angularMotor.Step(pTimestep, currentAngularV);
+
+            // ==================================================================
+            // From http://wiki.secondlife.com/wiki/LlSetVehicleFlags :
+            //    This flag prevents linear deflection parallel to world z-axis. This is useful
+            //    for preventing ground vehicles with large linear deflection, like bumper cars,
+            //    from climbing their linear deflection into the sky.
+            // That is, NO_DEFLECTION_UP says angular motion should not add any pitch or roll movement
+            // TODO: This is here because this is where ODE put it but documentation says it
+            //    is a linear effect. Where should this check go?
+            //if ((m_flags & (VehicleFlag.NO_DEFLECTION_UP)) != 0)
+            // {
+            //    angularMotorContributionV.X = 0f;
+            //    angularMotorContributionV.Y = 0f;
+            //  }
+
+            // Reduce any velocity by friction.
+            Vector3 frictionFactorW = ComputeFrictionFactor(m_angularFrictionTimescale, pTimestep);
+            angularMotorContributionV -= (currentAngularV * frictionFactorW);
+
+            Vector3 angularMotorContributionW = angularMotorContributionV * VehicleFrameOrientation;
+            VehicleRotationalVelocity += angularMotorContributionW;
+
+            VDetailLog("{0},  MoveAngular,angularTurning,curAngVelV={1},origVehRotVel={2},vehRotVel={3},frictFact={4}, angContribV={5},angContribW={6}",
+                        ControllingPrim.LocalID, currentAngularV, origVehicleRotationalVelocity, VehicleRotationalVelocity, frictionFactorW, angularMotorContributionV, angularMotorContributionW);
+        }
+
+        // From http://wiki.secondlife.com/wiki/Linden_Vehicle_Tutorial:
+        //      Some vehicles, like boats, should always keep their up-side up. This can be done by
+        //      enabling the "vertical attractor" behavior that springs the vehicle's local z-axis to
+        //      the world z-axis (a.k.a. "up"). To take advantage of this feature you would set the
+        //      VEHICLE_VERTICAL_ATTRACTION_TIMESCALE to control the period of the spring frequency,
+        //      and then set the VEHICLE_VERTICAL_ATTRACTION_EFFICIENCY to control the damping. An
+        //      efficiency of 0.0 will cause the spring to wobble around its equilibrium, while an
+        //      efficiency of 1.0 will cause the spring to reach its equilibrium with exponential decay.
+        public void ComputeAngularVerticalAttraction()
+        {
+
+            // If vertical attaction timescale is reasonable
+            if (BSParam.VehicleEnableAngularVerticalAttraction && m_verticalAttractionTimescale < m_verticalAttractionCutoff)
+            {
+                Vector3 vehicleUpAxis = Vector3.UnitZ * VehicleFrameOrientation;
+                switch (BSParam.VehicleAngularVerticalAttractionAlgorithm)
+                {
+                    case 0:
+                        {
+                            //Another formula to try got from :
+                            //http://answers.unity3d.com/questions/10425/how-to-stabilize-angular-motion-alignment-of-hover.html
+
+                            // Flipping what was originally a timescale into a speed variable and then multiplying it by 2
+                            //    since only computing half the distance between the angles.
+                            float verticalAttractionSpeed = (1 / m_verticalAttractionTimescale) * 2.0f;
+
+                            // Make a prediction of where the up axis will be when this is applied rather then where it is now as
+                            //     this makes for a smoother adjustment and less fighting between the various forces.
+                            Vector3 predictedUp = vehicleUpAxis * Quaternion.CreateFromAxisAngle(VehicleRotationalVelocity, 0f);
+
+                            // This is only half the distance to the target so it will take 2 seconds to complete the turn.
+                            Vector3 torqueVector = Vector3.Cross(predictedUp, Vector3.UnitZ);
+
+                            if ((m_flags & VehicleFlag.LIMIT_ROLL_ONLY) != 0)
+                            {
+                                Vector3 vehicleForwardAxis = Vector3.UnitX * VehicleFrameOrientation;
+                                torqueVector = ProjectVector(torqueVector, vehicleForwardAxis);
+                            }
+
+                            // Scale vector by our timescale since it is an acceleration it is r/s^2 or radians a timescale squared
+                            Vector3 vertContributionV = torqueVector * verticalAttractionSpeed * verticalAttractionSpeed;
+
+                            VehicleRotationalVelocity += vertContributionV;
+
+                            VDetailLog("{0},  MoveAngular,verticalAttraction,vertAttrSpeed={1},upAxis={2},PredictedUp={3},torqueVector={4},contrib={5}",
+                                            ControllingPrim.LocalID,
+                                            verticalAttractionSpeed,
+                                            vehicleUpAxis,
+                                            predictedUp,
+                                            torqueVector,
+                                            vertContributionV);
+                            break;
+                        }
+                    case 1:
+                        {
+                            // Possible solution derived from a discussion at:
+                            // http://stackoverflow.com/questions/14939657/computing-vector-from-quaternion-works-computing-quaternion-from-vector-does-no
+
+                            // Create a rotation that is only the vehicle's rotation around Z
+                            Vector3 currentEulerW = Vector3.Zero;
+                            VehicleFrameOrientation.GetEulerAngles(out currentEulerW.X, out currentEulerW.Y, out currentEulerW.Z);
+                            Quaternion justZOrientation = Quaternion.CreateFromAxisAngle(Vector3.UnitZ, currentEulerW.Z);
+
+                            // Create the axis that is perpendicular to the up vector and the rotated up vector.
+                            Vector3 differenceAxisW = Vector3.Cross(Vector3.UnitZ * justZOrientation, Vector3.UnitZ * VehicleFrameOrientation);
+                            // Compute the angle between those to vectors.
+                            double differenceAngle = Math.Acos((double)Vector3.Dot(Vector3.UnitZ, Vector3.Normalize(Vector3.UnitZ * VehicleFrameOrientation)));
+                            // 'differenceAngle' is the angle to rotate and 'differenceAxis' is the plane to rotate in to get the vehicle vertical
+
+                            // Reduce the change by the time period it is to change in. Timestep is handled when velocity is applied.
+                            // TODO: add 'efficiency'.
+                            // differenceAngle /= m_verticalAttractionTimescale;
+
+                            // Create the quaterian representing the correction angle
+                            Quaternion correctionRotationW = Quaternion.CreateFromAxisAngle(differenceAxisW, (float)differenceAngle);
+
+                            // Turn that quaternion into Euler values to make it into velocities to apply.
+                            Vector3 vertContributionW = Vector3.Zero;
+                            correctionRotationW.GetEulerAngles(out vertContributionW.X, out vertContributionW.Y, out vertContributionW.Z);
+                            vertContributionW *= -1f;
+                            vertContributionW /= m_verticalAttractionTimescale;
+
+                            VehicleRotationalVelocity += vertContributionW;
+
+                            VDetailLog("{0},  MoveAngular,verticalAttraction,upAxis={1},diffAxis={2},diffAng={3},corrRot={4},contrib={5}",
+                                            ControllingPrim.LocalID,
+                                            vehicleUpAxis,
+                                            differenceAxisW,
+                                            differenceAngle,
+                                            correctionRotationW,
+                                            vertContributionW);
+                            break;
+                        }
+                    case 2:
+                        {
+                            Vector3 vertContributionV = Vector3.Zero;
+                            Vector3 origRotVelW = VehicleRotationalVelocity;        // DEBUG DEBUG
+
+                            // Take a vector pointing up and convert it from world to vehicle relative coords.
+                            Vector3 verticalError = Vector3.Normalize(Vector3.UnitZ * VehicleFrameOrientation);
+
+                            // If vertical attraction correction is needed, the vector that was pointing up (UnitZ)
+                            //    is now:
+                            //    leaning to one side: rotated around the X axis with the Y value going
+                            //        from zero (nearly straight up) to one (completely to the side)) or
+                            //    leaning front-to-back: rotated around the Y axis with the value of X being between
+                            //         zero and one.
+                            // The value of Z is how far the rotation is off with 1 meaning none and 0 being 90 degrees.
+
+                            // Y error means needed rotation around X axis and visa versa.
+                            // Since the error goes from zero to one, the asin is the corresponding angle.
+                            vertContributionV.X = (float)Math.Asin(verticalError.Y);
+                            // (Tilt forward (positive X) needs to tilt back (rotate negative) around Y axis.)
+                            vertContributionV.Y = -(float)Math.Asin(verticalError.X);
+
+                            // If verticalError.Z is negative, the vehicle is upside down. Add additional push.
+                            if (verticalError.Z < 0f)
+                            {
+                                vertContributionV.X += Math.Sign(vertContributionV.X) * PIOverFour;
+                                // vertContribution.Y -= PIOverFour;
+                            }
+
+                            // 'vertContrbution' is now the necessary angular correction to correct tilt in one second.
+                            //     Correction happens over a number of seconds.
+                            Vector3 unscaledContribVerticalErrorV = vertContributionV;     // DEBUG DEBUG
+
+                            // The correction happens over the user's time period
+                            vertContributionV /= m_verticalAttractionTimescale;
+
+                            // Rotate the vehicle rotation to the world coordinates.
+                            VehicleRotationalVelocity += (vertContributionV * VehicleFrameOrientation);
+
+                            VDetailLog("{0},  MoveAngular,verticalAttraction,,upAxis={1},origRotVW={2},vertError={3},unscaledV={4},eff={5},ts={6},vertContribV={7}",
+                                            ControllingPrim.LocalID,
+                                            vehicleUpAxis,
+                                            origRotVelW,
+                                            verticalError,
+                                            unscaledContribVerticalErrorV,
+                                            m_verticalAttractionEfficiency,
+                                            m_verticalAttractionTimescale,
+                                            vertContributionV);
+                            break;
+                        }
+                    default:
+                        {
+                            break;
+                        }
+                }
+            }
+        }
+
+        // Angular correction to correct the direction the vehicle is pointing to be
+        //      the direction is should want to be pointing.
+        // The vehicle is moving in some direction and correct its orientation to it is pointing
+        //     in that direction.
+        // TODO: implement reference frame.
+        public void ComputeAngularDeflection()
+        {   
+
+            if (BSParam.VehicleEnableAngularDeflection && m_angularDeflectionEfficiency != 0 && VehicleForwardSpeed > 0.2)
+            {
+                Vector3 deflectContributionV = Vector3.Zero;
+
+                // The direction the vehicle is moving
+                Vector3 movingDirection = VehicleVelocity;
+                movingDirection.Normalize();
+
+                // If the vehicle is going backward, it is still pointing forward
+                movingDirection *= Math.Sign(VehicleForwardSpeed);
+
+                // The direction the vehicle is pointing
+                Vector3 pointingDirection = Vector3.UnitX * VehicleFrameOrientation;
+                //Predict where the Vehicle will be pointing after AngularVelocity change is applied. This will keep
+                //   from overshooting and allow this correction to merge with the Vertical Attraction peacefully.
+                Vector3 predictedPointingDirection = pointingDirection * Quaternion.CreateFromAxisAngle(VehicleRotationalVelocity, 0f);
+                predictedPointingDirection.Normalize();
+
+                // The difference between what is and what should be.
+               // Vector3 deflectionError = movingDirection - predictedPointingDirection;
+                Vector3 deflectionError = Vector3.Cross(movingDirection, predictedPointingDirection);
+
+                // Don't try to correct very large errors (not our job)
+                // if (Math.Abs(deflectionError.X) > PIOverFour) deflectionError.X = PIOverTwo * Math.Sign(deflectionError.X);
+                // if (Math.Abs(deflectionError.Y) > PIOverFour) deflectionError.Y = PIOverTwo * Math.Sign(deflectionError.Y);
+                // if (Math.Abs(deflectionError.Z) > PIOverFour) deflectionError.Z = PIOverTwo * Math.Sign(deflectionError.Z);
+                if (Math.Abs(deflectionError.X) > PIOverFour) deflectionError.X = 0f;
+                if (Math.Abs(deflectionError.Y) > PIOverFour) deflectionError.Y = 0f;
+                if (Math.Abs(deflectionError.Z) > PIOverFour) deflectionError.Z = 0f;
+
+                // ret = m_angularDeflectionCorrectionMotor(1f, deflectionError);
+
+                // Scale the correction by recovery timescale and efficiency
+                //    Not modeling a spring so clamp the scale to no more then the arc
+                deflectContributionV = (-deflectionError) * ClampInRange(0, m_angularDeflectionEfficiency/m_angularDeflectionTimescale,1f);
+                //deflectContributionV /= m_angularDeflectionTimescale;
+
+                VehicleRotationalVelocity += deflectContributionV;
+                VDetailLog("{0},  MoveAngular,Deflection,movingDir={1},pointingDir={2},deflectError={3},ret={4}",
+                    ControllingPrim.LocalID, movingDirection, pointingDirection, deflectionError, deflectContributionV);
+                VDetailLog("{0},  MoveAngular,Deflection,fwdSpd={1},defEff={2},defTS={3},PredictedPointingDir={4}",
+                    ControllingPrim.LocalID, VehicleForwardSpeed, m_angularDeflectionEfficiency, m_angularDeflectionTimescale, predictedPointingDirection);
+            }
+        }
+
+        // Angular change to rotate the vehicle around the Z axis when the vehicle
+        //     is tipped around the X axis.
+        // From http://wiki.secondlife.com/wiki/Linden_Vehicle_Tutorial:
+        //      The vertical attractor feature must be enabled in order for the banking behavior to
+        //      function. The way banking works is this: a rotation around the vehicle's roll-axis will
+        //      produce a angular velocity around the yaw-axis, causing the vehicle to turn. The magnitude
+        //      of the yaw effect will be proportional to the
+        //          VEHICLE_BANKING_EFFICIENCY, the angle of the roll rotation, and sometimes the vehicle's
+        //                 velocity along its preferred axis of motion.
+        //          The VEHICLE_BANKING_EFFICIENCY can vary between -1 and +1. When it is positive then any
+        //                  positive rotation (by the right-hand rule) about the roll-axis will effect a
+        //                  (negative) torque around the yaw-axis, making it turn to the right--that is the
+        //                  vehicle will lean into the turn, which is how real airplanes and motorcycle's work.
+        //                  Negating the banking coefficient will make it so that the vehicle leans to the
+        //                  outside of the turn (not very "physical" but might allow interesting vehicles so why not?).
+        //           The VEHICLE_BANKING_MIX is a fake (i.e. non-physical) parameter that is useful for making
+        //                  banking vehicles do what you want rather than what the laws of physics allow.
+        //                  For example, consider a real motorcycle...it must be moving forward in order for
+        //                  it to turn while banking, however video-game motorcycles are often configured
+        //                  to turn in place when at a dead stop--because they are often easier to control
+        //                  that way using the limited interface of the keyboard or game controller. The
+        //                  VEHICLE_BANKING_MIX enables combinations of both realistic and non-realistic
+        //                  banking by functioning as a slider between a banking that is correspondingly
+        //                  totally static (0.0) and totally dynamic (1.0). By "static" we mean that the
+        //                  banking effect depends only on the vehicle's rotation about its roll-axis compared
+        //                  to "dynamic" where the banking is also proportional to its velocity along its
+        //                  roll-axis. Finding the best value of the "mixture" will probably require trial and error.
+        //      The time it takes for the banking behavior to defeat a preexisting angular velocity about the
+        //      world z-axis is determined by the VEHICLE_BANKING_TIMESCALE. So if you want the vehicle to
+        //      bank quickly then give it a banking timescale of about a second or less, otherwise you can
+        //      make a sluggish vehicle by giving it a timescale of several seconds.
+        public void ComputeAngularBanking()
+        {
+            if (BSParam.VehicleEnableAngularBanking && m_bankingEfficiency != 0 && m_verticalAttractionTimescale < m_verticalAttractionCutoff)
+            {
+                Vector3 bankingContributionV = Vector3.Zero;
+
+                // Rotate a UnitZ vector (pointing up) to how the vehicle is oriented.
+                // As the vehicle rolls to the right or left, the Y value will increase from
+                //     zero (straight up) to 1 or -1 (full tilt right  or left)
+                Vector3 rollComponents = Vector3.UnitZ * VehicleFrameOrientation;
+
+                // Figure out the yaw value for this much roll.
+                float yawAngle = m_angularMotorDirection.X * m_bankingEfficiency;
+                //        actual error  =       static turn error            +           dynamic turn error
+                float mixedYawAngle =(yawAngle * (1f - m_bankingMix)) + ((yawAngle * m_bankingMix) * VehicleForwardSpeed);
+
+                // TODO: the banking effect should not go to infinity but what to limit it to?
+                //     And what should happen when this is being added to a user defined yaw that is already PI*4?
+                mixedYawAngle = ClampInRange(-FourPI, mixedYawAngle, FourPI);
+
+                // Build the force vector to change rotation from what it is to what it should be
+                bankingContributionV.Z = -mixedYawAngle;
+
+                // Don't do it all at once. Fudge because 1 second is too fast with most user defined roll as PI*4.
+                bankingContributionV /= m_bankingTimescale * BSParam.VehicleAngularBankingTimescaleFudge;
+
+                VehicleRotationalVelocity += bankingContributionV;
+
+
+                VDetailLog("{0},  MoveAngular,Banking,rollComp={1},speed={2},rollComp={3},yAng={4},mYAng={5},ret={6}",
+                            ControllingPrim.LocalID, rollComponents, VehicleForwardSpeed, rollComponents, yawAngle, mixedYawAngle, bankingContributionV);
+            }
+        }
+
+        // This is from previous instantiations of XXXDynamics.cs.
+        // Applies roll reference frame.
+        // TODO: is this the right way to separate the code to do this operation?
+        //    Should this be in MoveAngular()?
+        internal void LimitRotation(float timestep)
+        {
+            Quaternion rotq = VehicleOrientation;
+            Quaternion m_rot = rotq;
+            if (m_RollreferenceFrame != Quaternion.Identity)
+            {
+                if (rotq.X >= m_RollreferenceFrame.X)
+                {
+                    m_rot.X = rotq.X - (m_RollreferenceFrame.X / 2);
+                }
+                if (rotq.Y >= m_RollreferenceFrame.Y)
+                {
+                    m_rot.Y = rotq.Y - (m_RollreferenceFrame.Y / 2);
+                }
+                if (rotq.X <= -m_RollreferenceFrame.X)
+                {
+                    m_rot.X = rotq.X + (m_RollreferenceFrame.X / 2);
+                }
+                if (rotq.Y <= -m_RollreferenceFrame.Y)
+                {
+                    m_rot.Y = rotq.Y + (m_RollreferenceFrame.Y / 2);
+                }
+            }
+            if ((m_flags & VehicleFlag.LOCK_ROTATION) != 0)
+            {
+                m_rot.X = 0;
+                m_rot.Y = 0;
+            }
+            if (rotq != m_rot)
+            {
+                VehicleOrientation = m_rot;
+                VDetailLog("{0},  LimitRotation,done,orig={1},new={2}", ControllingPrim.LocalID, rotq, m_rot);
+            }
+
+        }
+
+        // Given a friction vector (reduction in seconds) and a timestep, return the factor to reduce
+        //     some value by to apply this friction.
+        private Vector3 ComputeFrictionFactor(Vector3 friction, float pTimestep)
+        {
+            Vector3 frictionFactor = Vector3.Zero;
+            if (friction != BSMotor.InfiniteVector)
+            {
+                // frictionFactor = (Vector3.One / FrictionTimescale) * timeStep;
+                // Individual friction components can be 'infinite' so compute each separately.
+                frictionFactor.X = (friction.X == BSMotor.Infinite) ? 0f : (1f / friction.X);
+                frictionFactor.Y = (friction.Y == BSMotor.Infinite) ? 0f : (1f / friction.Y);
+                frictionFactor.Z = (friction.Z == BSMotor.Infinite) ? 0f : (1f / friction.Z);
+                frictionFactor *= pTimestep;
+            }
+            return frictionFactor;
+        }
+
+        private float SortedClampInRange(float clampa, float val, float clampb)
+        {
+            if (clampa > clampb)
+            {
+                float temp = clampa;
+                clampa = clampb;
+                clampb = temp;
+            }
+           return ClampInRange(clampa, val, clampb);
+
+        }
+
+        //Given a Vector and a unit vector will return the amount of the vector is on the same axis as the unit.
+        private Vector3 ProjectVector(Vector3 vector, Vector3 onNormal)
+        {
+            float vectorDot = Vector3.Dot(vector, onNormal);
+            return onNormal * vectorDot;
+
+        }
+
+        private float ClampInRange(float low, float val, float high)
+        {
+            return Math.Max(low, Math.Min(val, high));
+            // return Utils.Clamp(val, low, high);
+        }
+
+        // Invoke the detailed logger and output something if it's enabled.
+        private void VDetailLog(string msg, params Object[] args)
+        {
+            if (ControllingPrim.PhysScene.VehicleLoggingEnabled)
+                ControllingPrim.PhysScene.DetailLog(msg, args);
+        }
+    }
+}
diff --git a/OpenSim/Region/PhysicsModules/BulletS/BSLinkset.cs b/OpenSim/Region/PhysicsModules/BulletS/BSLinkset.cs
new file mode 100755
index 0000000..8312239
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/BSLinkset.cs
@@ -0,0 +1,503 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyrightD
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+using System;
+using System.Collections.Generic;
+using System.Text;
+
+using OMV = OpenMetaverse;
+
+namespace OpenSim.Region.PhysicsModule.BulletS
+{
+
+public abstract class BSLinkset
+{
+    // private static string LogHeader = "[BULLETSIM LINKSET]";
+
+    public enum LinksetImplementation
+    {
+        Constraint   = 0,   // linkset tied together with constraints
+        Compound     = 1,   // linkset tied together as a compound object
+        Manual       = 2    // linkset tied together manually (code moves all the pieces)
+    }
+    // Create the correct type of linkset for this child
+    public static BSLinkset Factory(BSScene physScene, BSPrimLinkable parent)
+    {
+        BSLinkset ret = null;
+
+        switch (parent.LinksetType)
+        {
+            case LinksetImplementation.Constraint:
+                ret = new BSLinksetConstraints(physScene, parent);
+                break;
+            case LinksetImplementation.Compound:
+                ret = new BSLinksetCompound(physScene, parent);
+                break;
+            case LinksetImplementation.Manual:
+                // ret = new BSLinksetManual(physScene, parent);
+                break;
+            default:
+                ret = new BSLinksetCompound(physScene, parent);
+                break;
+        }
+        if (ret == null)
+        {
+            physScene.Logger.ErrorFormat("[BULLETSIM LINKSET] Factory could not create linkset. Parent name={1}, ID={2}", parent.Name, parent.LocalID);
+        }
+        return ret;
+    }
+
+    public class BSLinkInfo
+    {
+        public BSPrimLinkable member;
+        public BSLinkInfo(BSPrimLinkable pMember)
+        {
+            member = pMember;
+        }
+        public virtual void ResetLink() { }
+        public virtual void SetLinkParameters(BSConstraint constrain) { }
+        // Returns 'true' if physical property updates from the child should be reported to the simulator
+        public virtual bool ShouldUpdateChildProperties() { return false; }
+    }
+
+    public LinksetImplementation LinksetImpl { get; protected set; }
+
+    public BSPrimLinkable LinksetRoot { get; protected set; }
+
+    protected BSScene m_physicsScene { get; private set; }
+
+    static int m_nextLinksetID = 1;
+    public int LinksetID { get; private set; }
+
+    // The children under the root in this linkset.
+    // protected HashSet<BSPrimLinkable> m_children;
+    protected Dictionary<BSPrimLinkable, BSLinkInfo> m_children;
+
+    // We lock the diddling of linkset classes to prevent any badness.
+    // This locks the modification of the instances of this class. Changes
+    //    to the physical representation is done via the tainting mechenism.
+    protected object m_linksetActivityLock = new Object();
+
+    // We keep the prim's mass in the linkset structure since it could be dependent on other prims
+    public float LinksetMass { get; protected set; }
+
+    public virtual bool LinksetIsColliding { get { return false; } }
+
+    public OMV.Vector3 CenterOfMass
+    {
+        get { return ComputeLinksetCenterOfMass(); }
+    }
+
+    public OMV.Vector3 GeometricCenter
+    {
+        get { return ComputeLinksetGeometricCenter(); }
+    }
+
+    protected BSLinkset(BSScene scene, BSPrimLinkable parent)
+    {
+        // A simple linkset of one (no children)
+        LinksetID = m_nextLinksetID++;
+        // We create LOTS of linksets.
+        if (m_nextLinksetID <= 0)
+            m_nextLinksetID = 1;
+        m_physicsScene = scene;
+        LinksetRoot = parent;
+        m_children = new Dictionary<BSPrimLinkable, BSLinkInfo>();
+        LinksetMass = parent.RawMass;
+        Rebuilding = false;
+        RebuildScheduled = false;
+
+        parent.ClearDisplacement();
+    }
+
+    // Link to a linkset where the child knows the parent.
+    // Parent changing should not happen so do some sanity checking.
+    // We return the parent's linkset so the child can track its membership.
+    // Called at runtime.
+    public BSLinkset AddMeToLinkset(BSPrimLinkable child)
+    {
+        lock (m_linksetActivityLock)
+        {
+            // Don't add the root to its own linkset
+            if (!IsRoot(child))
+                AddChildToLinkset(child);
+            LinksetMass = ComputeLinksetMass();
+        }
+        return this;
+    }
+
+    // Remove a child from a linkset.
+    // Returns a new linkset for the child which is a linkset of one (just the
+    //    orphened child).
+    // Called at runtime.
+    public BSLinkset RemoveMeFromLinkset(BSPrimLinkable child, bool inTaintTime)
+    {
+        lock (m_linksetActivityLock)
+        {
+            if (IsRoot(child))
+            {
+                // Cannot remove the root from a linkset.
+                return this;
+            }
+            RemoveChildFromLinkset(child, inTaintTime);
+            LinksetMass = ComputeLinksetMass();
+        }
+
+        // The child is down to a linkset of just itself
+        return BSLinkset.Factory(m_physicsScene, child);
+    }
+
+    // Return 'true' if the passed object is the root object of this linkset
+    public bool IsRoot(BSPrimLinkable requestor)
+    {
+        return (requestor.LocalID == LinksetRoot.LocalID);
+    }
+
+    public int NumberOfChildren { get { return m_children.Count; } }
+
+    // Return 'true' if this linkset has any children (more than the root member)
+    public bool HasAnyChildren { get { return (m_children.Count > 0); } }
+
+    // Return 'true' if this child is in this linkset
+    public bool HasChild(BSPrimLinkable child)
+    {
+        bool ret = false;
+        lock (m_linksetActivityLock)
+        {
+            ret = m_children.ContainsKey(child);
+        }
+        return ret;
+    }
+
+    // Perform an action on each member of the linkset including root prim.
+    // Depends on the action on whether this should be done at taint time.
+    public delegate bool ForEachMemberAction(BSPrimLinkable obj);
+    public virtual bool ForEachMember(ForEachMemberAction action)
+    {
+        bool ret = false;
+        lock (m_linksetActivityLock)
+        {
+            action(LinksetRoot);
+            foreach (BSPrimLinkable po in m_children.Keys)
+            {
+                if (action(po))
+                    break;
+            }
+        }
+        return ret;
+    }
+
+    public bool TryGetLinkInfo(BSPrimLinkable child, out BSLinkInfo foundInfo)
+    {
+        bool ret = false;
+        BSLinkInfo found = null;
+        lock (m_linksetActivityLock)
+        {
+            ret = m_children.TryGetValue(child, out found);
+        }
+        foundInfo = found;
+        return ret;
+    }
+    // Perform an action on each member of the linkset including root prim.
+    // Depends on the action on whether this should be done at taint time.
+    public delegate bool ForEachLinkInfoAction(BSLinkInfo obj);
+    public virtual bool ForEachLinkInfo(ForEachLinkInfoAction action)
+    {
+        bool ret = false;
+        lock (m_linksetActivityLock)
+        {
+            foreach (BSLinkInfo po in m_children.Values)
+            {
+                if (action(po))
+                    break;
+            }
+        }
+        return ret;
+    }
+
+    // Check the type of the link and return 'true' if the link is flexible and the
+    //    updates from the child should be sent to the simulator so things change.
+    public virtual bool ShouldReportPropertyUpdates(BSPrimLinkable child)
+    {
+        bool ret = false;
+
+        BSLinkInfo linkInfo;
+        if (m_children.TryGetValue(child, out linkInfo))
+        {
+            ret = linkInfo.ShouldUpdateChildProperties();
+        }
+
+        return ret;
+    }
+
+    // Called after a simulation step to post a collision with this object.
+    // Return 'true' if linkset processed the collision. 'false' says the linkset didn't have
+    //     anything to add for the collision and it should be passed through normal processing.
+    // Default processing for a linkset.
+    public virtual bool HandleCollide(uint collidingWith, BSPhysObject collidee,
+                                OMV.Vector3 contactPoint, OMV.Vector3 contactNormal, float pentrationDepth)
+    {
+        bool ret = false;
+
+        // prims in the same linkset cannot collide with each other
+        BSPrimLinkable convCollidee = collidee as BSPrimLinkable;
+        if (convCollidee != null && (LinksetID == convCollidee.Linkset.LinksetID))
+        {
+            // By returning 'true', we tell the caller the collision has been 'handled' so it won't
+            //     do anything about this collision and thus, effectivily, ignoring the collision.
+            ret = true;
+        }
+        else
+        {
+            // Not a collision between members of the linkset. Must be a real collision.
+            // So the linkset root can know if there is a collision anywhere in the linkset.
+            LinksetRoot.SomeCollisionSimulationStep = m_physicsScene.SimulationStep;
+        }
+
+        return ret;
+    }
+
+    // I am the root of a linkset and a new child is being added
+    // Called while LinkActivity is locked.
+    protected abstract void AddChildToLinkset(BSPrimLinkable child);
+
+    // I am the root of a linkset and one of my children is being removed.
+    // Safe to call even if the child is not really in my linkset.
+    protected abstract void RemoveChildFromLinkset(BSPrimLinkable child, bool inTaintTime);
+
+    // When physical properties are changed the linkset needs to recalculate
+    //   its internal properties.
+    // May be called at runtime or taint-time.
+    public virtual void Refresh(BSPrimLinkable requestor)
+    {
+        LinksetMass = ComputeLinksetMass();
+    }
+
+    // Flag denoting the linkset is in the process of being rebuilt.
+    // Used to know not the schedule a rebuild in the middle of a rebuild.
+    // Because of potential update calls that could want to schedule another rebuild.
+    protected bool Rebuilding { get; set; }
+
+    // Flag saying a linkset rebuild has been scheduled.
+    // This is turned on when the rebuild is requested and turned off when
+    //     the rebuild is complete. Used to limit modifications to the
+    //     linkset parameters while the linkset is in an intermediate state.
+    // Protected by a "lock(m_linsetActivityLock)" on the BSLinkset object
+    public bool RebuildScheduled { get; protected set; }
+
+    // The object is going dynamic (physical). Do any setup necessary
+    //     for a dynamic linkset.
+    // Only the state of the passed object can be modified. The rest of the linkset
+    //     has not yet been fully constructed.
+    // Return 'true' if any properties updated on the passed object.
+    // Called at taint-time!
+    public abstract bool MakeDynamic(BSPrimLinkable child);
+
+    public virtual bool AllPartsComplete
+    {
+        get {
+            bool ret = true; 
+            this.ForEachMember((member) =>
+            {
+                if ((!member.IsInitialized) || member.IsIncomplete || member.PrimAssetState == BSPhysObject.PrimAssetCondition.Waiting)
+                {
+                    ret = false;
+                    return true;    // exit loop
+                }
+                return false;       // continue loop
+            });
+            return ret;
+        }
+    }
+
+    // The object is going static (non-physical). Do any setup necessary
+    //     for a static linkset.
+    // Return 'true' if any properties updated on the passed object.
+    // Called at taint-time!
+    public abstract bool MakeStatic(BSPrimLinkable child);
+
+    // Called when a parameter update comes from the physics engine for any object
+    //      of the linkset is received.
+    // Passed flag is update came from physics engine (true) or the user (false).
+    // Called at taint-time!!
+    public abstract void UpdateProperties(UpdatedProperties whichUpdated, BSPrimLinkable physObject);
+
+    // Routine used when rebuilding the body of the root of the linkset
+    // Destroy all the constraints have have been made to root.
+    // This is called when the root body is changing.
+    // Returns 'true' of something was actually removed and would need restoring
+    // Called at taint-time!!
+    public abstract bool RemoveDependencies(BSPrimLinkable child);
+
+    // ================================================================
+    // Some physical setting happen to all members of the linkset
+    public virtual void SetPhysicalFriction(float friction)
+    {
+        ForEachMember((member) =>
+            {
+                if (member.PhysBody.HasPhysicalBody)
+                    m_physicsScene.PE.SetFriction(member.PhysBody, friction);
+                return false;   // 'false' says to continue looping
+            }
+        );
+    }
+    public virtual void SetPhysicalRestitution(float restitution)
+    {
+        ForEachMember((member) =>
+            {
+                if (member.PhysBody.HasPhysicalBody)
+                    m_physicsScene.PE.SetRestitution(member.PhysBody, restitution);
+                return false;   // 'false' says to continue looping
+            }
+        );
+    }
+    public virtual void SetPhysicalGravity(OMV.Vector3 gravity)
+    {
+        ForEachMember((member) =>
+            {
+                if (member.PhysBody.HasPhysicalBody)
+                    m_physicsScene.PE.SetGravity(member.PhysBody, gravity);
+                return false;   // 'false' says to continue looping
+            }
+        );
+    }
+    public virtual void ComputeAndSetLocalInertia(OMV.Vector3 inertiaFactor, float linksetMass)
+    {
+        ForEachMember((member) =>
+            {
+                if (member.PhysBody.HasPhysicalBody)
+                {
+                    OMV.Vector3 inertia = m_physicsScene.PE.CalculateLocalInertia(member.PhysShape.physShapeInfo, linksetMass);
+                    member.Inertia = inertia * inertiaFactor;
+                    m_physicsScene.PE.SetMassProps(member.PhysBody, linksetMass, member.Inertia);
+                    m_physicsScene.PE.UpdateInertiaTensor(member.PhysBody);
+                    DetailLog("{0},BSLinkset.ComputeAndSetLocalInertia,m.mass={1}, inertia={2}", member.LocalID, linksetMass, member.Inertia);
+
+                }
+                return false;   // 'false' says to continue looping
+            }
+        );
+    }
+    public virtual void SetPhysicalCollisionFlags(CollisionFlags collFlags)
+    {
+        ForEachMember((member) =>
+            {
+                if (member.PhysBody.HasPhysicalBody)
+                    m_physicsScene.PE.SetCollisionFlags(member.PhysBody, collFlags);
+                return false;   // 'false' says to continue looping
+            }
+        );
+    }
+    public virtual void AddToPhysicalCollisionFlags(CollisionFlags collFlags)
+    {
+        ForEachMember((member) =>
+            {
+                if (member.PhysBody.HasPhysicalBody)
+                    m_physicsScene.PE.AddToCollisionFlags(member.PhysBody, collFlags);
+                return false;   // 'false' says to continue looping
+            }
+        );
+    }
+    public virtual void RemoveFromPhysicalCollisionFlags(CollisionFlags collFlags)
+    {
+        ForEachMember((member) =>
+            {
+                if (member.PhysBody.HasPhysicalBody)
+                    m_physicsScene.PE.RemoveFromCollisionFlags(member.PhysBody, collFlags);
+                return false;   // 'false' says to continue looping
+            }
+        );
+    }
+    // ================================================================
+    protected virtual float ComputeLinksetMass()
+    {
+        float mass = LinksetRoot.RawMass;
+        if (HasAnyChildren)
+        {
+            lock (m_linksetActivityLock)
+            {
+                foreach (BSPrimLinkable bp in m_children.Keys)
+                {
+                    mass += bp.RawMass;
+                }
+            }
+        }
+        return mass;
+    }
+
+    // Computes linkset's center of mass in world coordinates.
+    protected virtual OMV.Vector3 ComputeLinksetCenterOfMass()
+    {
+        OMV.Vector3 com;
+        lock (m_linksetActivityLock)
+        {
+            com = LinksetRoot.Position * LinksetRoot.RawMass;
+            float totalMass = LinksetRoot.RawMass;
+
+            foreach (BSPrimLinkable bp in m_children.Keys)
+            {
+                com += bp.Position * bp.RawMass;
+                totalMass += bp.RawMass;
+            }
+            if (totalMass != 0f)
+                com /= totalMass;
+        }
+
+        return com;
+    }
+
+    protected virtual OMV.Vector3 ComputeLinksetGeometricCenter()
+    {
+        OMV.Vector3 com;
+        lock (m_linksetActivityLock)
+        {
+            com = LinksetRoot.Position;
+
+            foreach (BSPrimLinkable bp in m_children.Keys)
+            {
+                com += bp.Position;
+            }
+            com /= (m_children.Count + 1);
+        }
+
+        return com;
+    }
+
+    #region Extension
+    public virtual object Extension(string pFunct, params object[] pParams)
+    {
+        return null;
+    }
+    #endregion // Extension
+
+    // Invoke the detailed logger and output something if it's enabled.
+    protected void DetailLog(string msg, params Object[] args)
+    {
+        if (m_physicsScene.PhysicsLogging.Enabled)
+            m_physicsScene.DetailLog(msg, args);
+    }
+}
+}
diff --git a/OpenSim/Region/PhysicsModules/BulletS/BSLinksetCompound.cs b/OpenSim/Region/PhysicsModules/BulletS/BSLinksetCompound.cs
new file mode 100755
index 0000000..953ddee
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/BSLinksetCompound.cs
@@ -0,0 +1,477 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyrightD
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+using System;
+using System.Collections.Generic;
+using System.Text;
+
+using OpenSim.Framework;
+
+using OMV = OpenMetaverse;
+
+namespace OpenSim.Region.PhysicsModule.BulletS
+{
+
+public sealed class BSLinksetCompound : BSLinkset
+{
+#pragma warning disable 414
+    private static string LogHeader = "[BULLETSIM LINKSET COMPOUND]";
+#pragma warning restore 414
+
+    public BSLinksetCompound(BSScene scene, BSPrimLinkable parent)
+        : base(scene, parent)
+    {
+        LinksetImpl = LinksetImplementation.Compound;
+    }
+
+    // ================================================================
+    // Changing the physical property of the linkset only needs to change the root
+    public override void SetPhysicalFriction(float friction)
+    {
+        if (LinksetRoot.PhysBody.HasPhysicalBody)
+            m_physicsScene.PE.SetFriction(LinksetRoot.PhysBody, friction);
+    }
+    public override void SetPhysicalRestitution(float restitution)
+    {
+        if (LinksetRoot.PhysBody.HasPhysicalBody)
+            m_physicsScene.PE.SetRestitution(LinksetRoot.PhysBody, restitution);
+    }
+    public override void SetPhysicalGravity(OMV.Vector3 gravity)
+    {
+        if (LinksetRoot.PhysBody.HasPhysicalBody)
+            m_physicsScene.PE.SetGravity(LinksetRoot.PhysBody, gravity);
+    }
+    public override void ComputeAndSetLocalInertia(OMV.Vector3 inertiaFactor, float linksetMass)
+    {
+        OMV.Vector3 inertia = m_physicsScene.PE.CalculateLocalInertia(LinksetRoot.PhysShape.physShapeInfo, linksetMass);
+        LinksetRoot.Inertia = inertia * inertiaFactor;
+        m_physicsScene.PE.SetMassProps(LinksetRoot.PhysBody, linksetMass, LinksetRoot.Inertia);
+        m_physicsScene.PE.UpdateInertiaTensor(LinksetRoot.PhysBody);
+    }
+    public override void SetPhysicalCollisionFlags(CollisionFlags collFlags)
+    {
+        if (LinksetRoot.PhysBody.HasPhysicalBody)
+            m_physicsScene.PE.SetCollisionFlags(LinksetRoot.PhysBody, collFlags);
+    }
+    public override void AddToPhysicalCollisionFlags(CollisionFlags collFlags)
+    {
+        if (LinksetRoot.PhysBody.HasPhysicalBody)
+            m_physicsScene.PE.AddToCollisionFlags(LinksetRoot.PhysBody, collFlags);
+    }
+    public override void RemoveFromPhysicalCollisionFlags(CollisionFlags collFlags)
+    {
+        if (LinksetRoot.PhysBody.HasPhysicalBody)
+            m_physicsScene.PE.RemoveFromCollisionFlags(LinksetRoot.PhysBody, collFlags);
+    }
+    // ================================================================
+
+    // When physical properties are changed the linkset needs to recalculate
+    //   its internal properties.
+    public override void Refresh(BSPrimLinkable requestor)
+    {
+        // Something changed so do the rebuilding thing
+        ScheduleRebuild(requestor);
+        base.Refresh(requestor);
+    }
+
+    // Schedule a refresh to happen after all the other taint processing.
+    private void ScheduleRebuild(BSPrimLinkable requestor)
+    {
+        // When rebuilding, it is possible to set properties that would normally require a rebuild.
+        //    If already rebuilding, don't request another rebuild.
+        //    If a linkset with just a root prim (simple non-linked prim) don't bother rebuilding.
+        lock (m_linksetActivityLock)
+        {
+            if (!RebuildScheduled && !Rebuilding && HasAnyChildren)
+            {
+                InternalScheduleRebuild(requestor);
+            }
+        }
+    }
+
+    // Must be called with m_linksetActivityLock or race conditions will haunt you.
+    private void InternalScheduleRebuild(BSPrimLinkable requestor)
+    {
+        DetailLog("{0},BSLinksetCompound.InternalScheduleRebuild,,rebuilding={1},hasChildren={2}",
+                            requestor.LocalID, Rebuilding, HasAnyChildren);
+        RebuildScheduled = true;
+        m_physicsScene.PostTaintObject("BSLinksetCompound.ScheduleRebuild", LinksetRoot.LocalID, delegate()
+        {
+            if (HasAnyChildren)
+            {
+                if (this.AllPartsComplete)
+                {
+                    RecomputeLinksetCompound();
+                }
+                else
+                {
+                    DetailLog("{0},BSLinksetCompound.InternalScheduleRebuild,,rescheduling because not all children complete",
+                                                    requestor.LocalID);
+                    InternalScheduleRebuild(requestor);
+                }
+            }
+            RebuildScheduled = false;
+        });
+    }
+
+    // The object is going dynamic (physical). Do any setup necessary for a dynamic linkset.
+    // Only the state of the passed object can be modified. The rest of the linkset
+    //     has not yet been fully constructed.
+    // Return 'true' if any properties updated on the passed object.
+    // Called at taint-time!
+    public override bool MakeDynamic(BSPrimLinkable child)
+    {
+        bool ret = false;
+        DetailLog("{0},BSLinksetCompound.MakeDynamic,call,IsRoot={1}", child.LocalID, IsRoot(child));
+        if (IsRoot(child))
+        {
+            // The root is going dynamic. Rebuild the linkset so parts and mass get computed properly.
+            Refresh(LinksetRoot);
+        }
+        return ret;
+    }
+
+    // The object is going static (non-physical). We do not do anything for static linksets.
+    // Return 'true' if any properties updated on the passed object.
+    // Called at taint-time!
+    public override bool MakeStatic(BSPrimLinkable child)
+    {
+        bool ret = false;
+
+        DetailLog("{0},BSLinksetCompound.MakeStatic,call,IsRoot={1}", child.LocalID, IsRoot(child));
+        child.ClearDisplacement();
+        if (IsRoot(child))
+        {
+            // Schedule a rebuild to verify that the root shape is set to the real shape.
+            Refresh(LinksetRoot);
+        }
+        return ret;
+    }
+
+    // 'physicalUpdate' is true if these changes came directly from the physics engine. Don't need to rebuild then.
+    // Called at taint-time.
+    public override void UpdateProperties(UpdatedProperties whichUpdated, BSPrimLinkable updated)
+    {
+        if (!LinksetRoot.IsPhysicallyActive)
+        {
+            // No reason to do this physical stuff for static linksets.
+            DetailLog("{0},BSLinksetCompound.UpdateProperties,notPhysical", LinksetRoot.LocalID);
+            return;
+        }
+
+        // The user moving a child around requires the rebuilding of the linkset compound shape
+        // One problem is this happens when a border is crossed -- the simulator implementation
+        //    stores the position into the group which causes the move of the object
+        //    but it also means all the child positions get updated.
+        //    What would cause an unnecessary rebuild so we make sure the linkset is in a
+        //    region before bothering to do a rebuild.
+        if (!IsRoot(updated) && m_physicsScene.TerrainManager.IsWithinKnownTerrain(LinksetRoot.RawPosition))
+        {
+            // If a child of the linkset is updating only the position or rotation, that can be done
+            //    without rebuilding the linkset.
+            // If a handle for the child can be fetch, we update the child here. If a rebuild was
+            //    scheduled by someone else, the rebuild will just replace this setting.
+
+            bool updatedChild = false;
+            // Anything other than updating position or orientation usually means a physical update
+            //     and that is caused by us updating the object.
+            if ((whichUpdated & ~(UpdatedProperties.Position | UpdatedProperties.Orientation)) == 0)
+            {
+                // Find the physical instance of the child
+                if (!RebuildScheduled   // if rebuilding, let the rebuild do it
+                        && !LinksetRoot.IsIncomplete    // if waiting for assets or whatever, don't change
+                        && LinksetRoot.PhysShape.HasPhysicalShape   // there must be a physical shape assigned
+                        && m_physicsScene.PE.IsCompound(LinksetRoot.PhysShape.physShapeInfo))
+                {
+                    // It is possible that the linkset is still under construction and the child is not yet
+                    //    inserted into the compound shape. A rebuild of the linkset in a pre-step action will
+                    //    build the whole thing with the new position or rotation.
+                    // The index must be checked because Bullet references the child array but does no validity
+                    //    checking of the child index passed.
+                    int numLinksetChildren = m_physicsScene.PE.GetNumberOfCompoundChildren(LinksetRoot.PhysShape.physShapeInfo);
+                    if (updated.LinksetChildIndex < numLinksetChildren)
+                    {
+                        BulletShape linksetChildShape = m_physicsScene.PE.GetChildShapeFromCompoundShapeIndex(LinksetRoot.PhysShape.physShapeInfo, updated.LinksetChildIndex);
+                        if (linksetChildShape.HasPhysicalShape)
+                        {
+                            // Found the child shape within the compound shape
+                            m_physicsScene.PE.UpdateChildTransform(LinksetRoot.PhysShape.physShapeInfo, updated.LinksetChildIndex,
+                                                                        updated.RawPosition - LinksetRoot.RawPosition,
+                                                                        updated.RawOrientation * OMV.Quaternion.Inverse(LinksetRoot.RawOrientation),
+                                                                        true /* shouldRecalculateLocalAabb */);
+                            updatedChild = true;
+                            DetailLog("{0},BSLinksetCompound.UpdateProperties,changeChildPosRot,whichUpdated={1},pos={2},rot={3}",
+                                                        updated.LocalID, whichUpdated, updated.RawPosition, updated.RawOrientation);
+                        }
+                        else    // DEBUG DEBUG
+                        {       // DEBUG DEBUG
+                            DetailLog("{0},BSLinksetCompound.UpdateProperties,couldNotUpdateChild,noChildShape,shape={1}",
+                                                                        updated.LocalID, linksetChildShape);
+                        }       // DEBUG DEBUG
+                    }
+                    else    // DEBUG DEBUG
+                    {       // DEBUG DEBUG
+                        // the child is not yet in the compound shape. This is non-fatal.
+                        DetailLog("{0},BSLinksetCompound.UpdateProperties,couldNotUpdateChild,childNotInCompoundShape,numChildren={1},index={2}",
+                                                                    updated.LocalID, numLinksetChildren, updated.LinksetChildIndex);
+                    }       // DEBUG DEBUG
+                }
+                else    // DEBUG DEBUG
+                {       // DEBUG DEBUG
+                    DetailLog("{0},BSLinksetCompound.UpdateProperties,couldNotUpdateChild,noBodyOrNotCompound", updated.LocalID);
+                }       // DEBUG DEBUG
+
+                if (!updatedChild)
+                {
+                    // If couldn't do the individual child, the linkset needs a rebuild to incorporate the new child info.
+                    // Note: there are several ways through this code that will not update the child if
+                    //    the linkset is being rebuilt. In this case, scheduling a rebuild is a NOOP since
+                    //    there will already be a rebuild scheduled.
+                    DetailLog("{0},BSLinksetCompound.UpdateProperties,couldNotUpdateChild.schedulingRebuild,whichUpdated={1}",
+                                                                    updated.LocalID, whichUpdated);
+                    Refresh(updated);
+                }
+            }
+        }
+    }
+
+    // Routine called when rebuilding the body of some member of the linkset.
+    // If one of the bodies is being changed, the linkset needs rebuilding.
+    // For instance, a linkset is built and then a mesh asset is read in and the mesh is recreated.
+    // Returns 'true' of something was actually removed and would need restoring
+    // Called at taint-time!!
+    public override bool RemoveDependencies(BSPrimLinkable child)
+    {
+        bool ret = false;
+
+        DetailLog("{0},BSLinksetCompound.RemoveDependencies,refreshIfChild,rID={1},rBody={2},isRoot={3}",
+                        child.LocalID, LinksetRoot.LocalID, LinksetRoot.PhysBody, IsRoot(child));
+
+        Refresh(child);
+
+        return ret;
+    }
+
+    // ================================================================
+
+    // Add a new child to the linkset.
+    // Called while LinkActivity is locked.
+    protected override void AddChildToLinkset(BSPrimLinkable child)
+    {
+        if (!HasChild(child))
+        {
+            m_children.Add(child, new BSLinkInfo(child));
+
+            DetailLog("{0},BSLinksetCompound.AddChildToLinkset,call,child={1}", LinksetRoot.LocalID, child.LocalID);
+
+            // Rebuild the compound shape with the new child shape included
+            Refresh(child);
+        }
+        return;
+    }
+
+    // Remove the specified child from the linkset.
+    // Safe to call even if the child is not really in the linkset.
+    protected override void RemoveChildFromLinkset(BSPrimLinkable child, bool inTaintTime)
+    {
+        child.ClearDisplacement();
+
+        if (m_children.Remove(child))
+        {
+            DetailLog("{0},BSLinksetCompound.RemoveChildFromLinkset,call,rID={1},rBody={2},cID={3},cBody={4}",
+                            child.LocalID,
+                            LinksetRoot.LocalID, LinksetRoot.PhysBody.AddrString,
+                            child.LocalID, child.PhysBody.AddrString);
+
+            // Cause the child's body to be rebuilt and thus restored to normal operation
+            child.ForceBodyShapeRebuild(inTaintTime);
+
+            if (!HasAnyChildren)
+            {
+                // The linkset is now empty. The root needs rebuilding.
+                LinksetRoot.ForceBodyShapeRebuild(inTaintTime);
+            }
+            else
+            {
+                // Rebuild the compound shape with the child removed
+                Refresh(LinksetRoot);
+            }
+        }
+        return;
+    }
+
+    // Called before the simulation step to make sure the compound based linkset
+    //    is all initialized.
+    // Constraint linksets are rebuilt every time.
+    // Note that this works for rebuilding just the root after a linkset is taken apart.
+    // Called at taint time!!
+    private bool UseBulletSimRootOffsetHack = false;    // Attempt to have Bullet track the coords of root compound shape
+    private void RecomputeLinksetCompound()
+    {
+        try
+        {
+            Rebuilding = true;
+
+            // No matter what is being done, force the root prim's PhysBody and PhysShape to get set
+            //     to what they should be as if the root was not in a linkset.
+            // Not that bad since we only get into this routine if there are children in the linkset and
+            //     something has been updated/changed.
+            // Have to do the rebuild before checking for physical because this might be a linkset
+            //     being destructed and going non-physical.
+            LinksetRoot.ForceBodyShapeRebuild(true);
+
+            // There is no reason to build all this physical stuff for a non-physical or empty linkset.
+            if (!LinksetRoot.IsPhysicallyActive || !HasAnyChildren)
+            {
+                DetailLog("{0},BSLinksetCompound.RecomputeLinksetCompound,notPhysicalOrNoChildren", LinksetRoot.LocalID);
+                return; // Note the 'finally' clause at the botton which will get executed.
+            }
+
+            // Get a new compound shape to build the linkset shape in.
+            BSShape linksetShape = BSShapeCompound.GetReference(m_physicsScene);
+
+            // Compute a displacement for each component so it is relative to the center-of-mass.
+            // Bullet presumes an object's origin (relative <0,0,0>) is its center-of-mass
+            OMV.Vector3 centerOfMassW = ComputeLinksetCenterOfMass();
+
+            OMV.Quaternion invRootOrientation = OMV.Quaternion.Normalize(OMV.Quaternion.Inverse(LinksetRoot.RawOrientation));
+            OMV.Vector3 origRootPosition = LinksetRoot.RawPosition;
+
+            // 'centerDisplacementV' is the vehicle relative distance from the simulator root position to the center-of-mass
+            OMV.Vector3 centerDisplacementV = (centerOfMassW - LinksetRoot.RawPosition) * invRootOrientation;
+            if (UseBulletSimRootOffsetHack || !BSParam.LinksetOffsetCenterOfMass)
+            {
+                // Zero everything if center-of-mass displacement is not being done.
+                centerDisplacementV = OMV.Vector3.Zero;
+                LinksetRoot.ClearDisplacement();
+            }
+            else
+            {
+                // The actual center-of-mass could have been set by the user.
+                centerDisplacementV = LinksetRoot.SetEffectiveCenterOfMassDisplacement(centerDisplacementV);
+            }
+
+            DetailLog("{0},BSLinksetCompound.RecomputeLinksetCompound,COM,rootPos={1},com={2},comDisp={3}",
+                                LinksetRoot.LocalID, origRootPosition, centerOfMassW, centerDisplacementV);
+
+            // Add the shapes of all the components of the linkset
+            int memberIndex = 1;
+            ForEachMember((cPrim) =>
+            {
+                if (IsRoot(cPrim))
+                {
+                    // Root shape is always index zero.
+                    cPrim.LinksetChildIndex = 0;
+                }
+                else
+                {
+                    cPrim.LinksetChildIndex = memberIndex;
+                    memberIndex++;
+                }
+
+                // Get a reference to the shape of the child for adding of that shape to the linkset compound shape
+                BSShape childShape = cPrim.PhysShape.GetReference(m_physicsScene, cPrim);
+
+                // Offset the child shape from the center-of-mass and rotate it to root relative.
+                OMV.Vector3 offsetPos = (cPrim.RawPosition - origRootPosition) * invRootOrientation - centerDisplacementV;
+                OMV.Quaternion offsetRot = OMV.Quaternion.Normalize(cPrim.RawOrientation) * invRootOrientation;
+
+                // Add the child shape to the compound shape being built
+                if (childShape.physShapeInfo.HasPhysicalShape)
+                {
+                    m_physicsScene.PE.AddChildShapeToCompoundShape(linksetShape.physShapeInfo, childShape.physShapeInfo, offsetPos, offsetRot);
+                    DetailLog("{0},BSLinksetCompound.RecomputeLinksetCompound,addChild,indx={1},cShape={2},offPos={3},offRot={4}",
+                                LinksetRoot.LocalID, cPrim.LinksetChildIndex, childShape, offsetPos, offsetRot);
+
+                    // Since we are borrowing the shape of the child, disable the origional child body
+                    if (!IsRoot(cPrim))
+                    {
+                        m_physicsScene.PE.AddToCollisionFlags(cPrim.PhysBody, CollisionFlags.CF_NO_CONTACT_RESPONSE);
+                        m_physicsScene.PE.ForceActivationState(cPrim.PhysBody, ActivationState.DISABLE_SIMULATION);
+                        // We don't want collisions from the old linkset children.
+                        m_physicsScene.PE.RemoveFromCollisionFlags(cPrim.PhysBody, CollisionFlags.BS_SUBSCRIBE_COLLISION_EVENTS);
+                        cPrim.PhysBody.collisionType = CollisionType.LinksetChild;
+                    }
+                }
+                else
+                {
+                    // The linkset must be in an intermediate state where all the children have not yet
+                    //    been constructed. This sometimes happens on startup when everything is getting
+                    //    built and some shapes have to wait for assets to be read in.
+                    // Just skip this linkset for the moment and cause the shape to be rebuilt next tick.
+                    // One problem might be that the shape is broken somehow and it never becomes completely
+                    //    available. This might cause the rebuild to happen over and over.
+                    InternalScheduleRebuild(LinksetRoot);
+                    DetailLog("{0},BSLinksetCompound.RecomputeLinksetCompound,addChildWithNoShape,indx={1},cShape={2},offPos={3},offRot={4}",
+                                    LinksetRoot.LocalID, cPrim.LinksetChildIndex, childShape, offsetPos, offsetRot);
+                    // Output an annoying warning. It should only happen once but if it keeps coming out,
+                    //    the user knows there is something wrong and will report it.
+                    m_physicsScene.Logger.WarnFormat("{0} Linkset rebuild warning. If this happens more than one or two times, please report in Mantis 7191", LogHeader);
+                    m_physicsScene.Logger.WarnFormat("{0} pName={1}, childIdx={2}, shape={3}",
+                                    LogHeader, LinksetRoot.Name, cPrim.LinksetChildIndex, childShape);
+
+                    // This causes the loop to bail on building the rest of this linkset.
+                    // The rebuild operation will fix it up next tick or declare the object unbuildable.
+                    return true;
+                }
+
+                return false;   // 'false' says to move onto the next child in the list
+            });
+
+            // Replace the root shape with the built compound shape.
+            // Object removed and added to world to get collision cache rebuilt for new shape.
+            LinksetRoot.PhysShape.Dereference(m_physicsScene);
+            LinksetRoot.PhysShape = linksetShape;
+            m_physicsScene.PE.RemoveObjectFromWorld(m_physicsScene.World, LinksetRoot.PhysBody);
+            m_physicsScene.PE.SetCollisionShape(m_physicsScene.World, LinksetRoot.PhysBody, linksetShape.physShapeInfo);
+            m_physicsScene.PE.AddObjectToWorld(m_physicsScene.World, LinksetRoot.PhysBody);
+            DetailLog("{0},BSLinksetCompound.RecomputeLinksetCompound,addBody,body={1},shape={2}",
+                                        LinksetRoot.LocalID, LinksetRoot.PhysBody, linksetShape);
+
+            // With all of the linkset packed into the root prim, it has the mass of everyone.
+            LinksetMass = ComputeLinksetMass();
+            LinksetRoot.UpdatePhysicalMassProperties(LinksetMass, true);
+
+            if (UseBulletSimRootOffsetHack)
+            {
+                // Enable the physical position updator to return the position and rotation of the root shape.
+                // This enables a feature in the C++ code to return the world coordinates of the first shape in the
+                //     compound shape. This aleviates the need to offset the returned physical position by the
+                //     center-of-mass offset.
+                // TODO: either debug this feature or remove it.
+                m_physicsScene.PE.AddToCollisionFlags(LinksetRoot.PhysBody, CollisionFlags.BS_RETURN_ROOT_COMPOUND_SHAPE);
+            }
+        }
+        finally
+        {
+            Rebuilding = false;
+        }
+
+        // See that the Aabb surrounds the new shape
+        m_physicsScene.PE.RecalculateCompoundShapeLocalAabb(LinksetRoot.PhysShape.physShapeInfo);
+    }
+}
+}
\ No newline at end of file
diff --git a/OpenSim/Region/PhysicsModules/BulletS/BSLinksetConstraints.cs b/OpenSim/Region/PhysicsModules/BulletS/BSLinksetConstraints.cs
new file mode 100755
index 0000000..c4b4c86
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/BSLinksetConstraints.cs
@@ -0,0 +1,852 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyrightD
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+using System;
+using System.Collections.Generic;
+using System.Text;
+
+using OMV = OpenMetaverse;
+
+namespace OpenSim.Region.PhysicsModule.BulletS
+{
+public sealed class BSLinksetConstraints : BSLinkset
+{
+    // private static string LogHeader = "[BULLETSIM LINKSET CONSTRAINTS]";
+
+    public class BSLinkInfoConstraint : BSLinkInfo
+    {
+        public ConstraintType constraintType;
+        public BSConstraint constraint;
+        public OMV.Vector3 linearLimitLow;
+        public OMV.Vector3 linearLimitHigh;
+        public OMV.Vector3 angularLimitLow;
+        public OMV.Vector3 angularLimitHigh;
+        public bool useFrameOffset;
+        public bool enableTransMotor;
+        public float transMotorMaxVel;
+        public float transMotorMaxForce;
+        public float cfm;
+        public float erp;
+        public float solverIterations;
+        //
+        public OMV.Vector3 frameInAloc;
+        public OMV.Quaternion frameInArot;
+        public OMV.Vector3 frameInBloc;
+        public OMV.Quaternion frameInBrot;
+        public bool useLinearReferenceFrameA;
+        // Spring
+        public bool[] springAxisEnable;
+        public float[] springDamping;
+        public float[] springStiffness;
+        public OMV.Vector3 springLinearEquilibriumPoint;
+        public OMV.Vector3 springAngularEquilibriumPoint;
+
+        public BSLinkInfoConstraint(BSPrimLinkable pMember)
+            : base(pMember)
+        {
+            constraint = null;
+            ResetLink();
+            member.PhysScene.DetailLog("{0},BSLinkInfoConstraint.creation", member.LocalID);
+        }
+
+        // Set all the parameters for this constraint to a fixed, non-movable constraint.
+        public override void ResetLink()
+        {
+            // constraintType = ConstraintType.D6_CONSTRAINT_TYPE;
+            constraintType = ConstraintType.BS_FIXED_CONSTRAINT_TYPE;
+            linearLimitLow = OMV.Vector3.Zero;
+            linearLimitHigh = OMV.Vector3.Zero;
+            angularLimitLow = OMV.Vector3.Zero;
+            angularLimitHigh = OMV.Vector3.Zero;
+            useFrameOffset = BSParam.LinkConstraintUseFrameOffset;
+            enableTransMotor = BSParam.LinkConstraintEnableTransMotor;
+            transMotorMaxVel = BSParam.LinkConstraintTransMotorMaxVel;
+            transMotorMaxForce = BSParam.LinkConstraintTransMotorMaxForce;
+            cfm = BSParam.LinkConstraintCFM;
+            erp = BSParam.LinkConstraintERP;
+            solverIterations = BSParam.LinkConstraintSolverIterations;
+            frameInAloc = OMV.Vector3.Zero;
+            frameInArot = OMV.Quaternion.Identity;
+            frameInBloc = OMV.Vector3.Zero;
+            frameInBrot = OMV.Quaternion.Identity;
+            useLinearReferenceFrameA = true;
+            springAxisEnable = new bool[6];
+            springDamping = new float[6];
+            springStiffness = new float[6];
+            for (int ii = 0; ii < springAxisEnable.Length; ii++)
+            {
+                springAxisEnable[ii] = false;
+                springDamping[ii] = BSAPITemplate.SPRING_NOT_SPECIFIED;
+                springStiffness[ii] = BSAPITemplate.SPRING_NOT_SPECIFIED;
+            }
+            springLinearEquilibriumPoint = OMV.Vector3.Zero;
+            springAngularEquilibriumPoint = OMV.Vector3.Zero;
+            member.PhysScene.DetailLog("{0},BSLinkInfoConstraint.ResetLink", member.LocalID);
+        }
+
+        // Given a constraint, apply the current constraint parameters to same.
+        public override void SetLinkParameters(BSConstraint constrain)
+        {
+            member.PhysScene.DetailLog("{0},BSLinkInfoConstraint.SetLinkParameters,type={1}", member.LocalID, constraintType);
+            switch (constraintType)
+            {
+                case ConstraintType.BS_FIXED_CONSTRAINT_TYPE:
+                case ConstraintType.D6_CONSTRAINT_TYPE:
+                    BSConstraint6Dof constrain6dof = constrain as BSConstraint6Dof;
+                    if (constrain6dof != null)
+                    {
+                        // NOTE: D6_SPRING_CONSTRAINT_TYPE should be updated if you change any of this code.
+                        // zero linear and angular limits makes the objects unable to move in relation to each other
+                        constrain6dof.SetLinearLimits(linearLimitLow, linearLimitHigh);
+                        constrain6dof.SetAngularLimits(angularLimitLow, angularLimitHigh);
+
+                        // tweek the constraint to increase stability
+                        constrain6dof.UseFrameOffset(useFrameOffset);
+                        constrain6dof.TranslationalLimitMotor(enableTransMotor, transMotorMaxVel, transMotorMaxForce);
+                        constrain6dof.SetCFMAndERP(cfm, erp);
+                        if (solverIterations != 0f)
+                        {
+                            constrain6dof.SetSolverIterations(solverIterations);
+                        }
+                    }
+                    break;
+                case ConstraintType.D6_SPRING_CONSTRAINT_TYPE:
+                    BSConstraintSpring constrainSpring = constrain as BSConstraintSpring;
+                    if (constrainSpring != null)
+                    {
+                        // zero linear and angular limits makes the objects unable to move in relation to each other
+                        constrainSpring.SetLinearLimits(linearLimitLow, linearLimitHigh);
+                        constrainSpring.SetAngularLimits(angularLimitLow, angularLimitHigh);
+
+                        // tweek the constraint to increase stability
+                        constrainSpring.UseFrameOffset(useFrameOffset);
+                        constrainSpring.TranslationalLimitMotor(enableTransMotor, transMotorMaxVel, transMotorMaxForce);
+                        constrainSpring.SetCFMAndERP(cfm, erp);
+                        if (solverIterations != 0f)
+                        {
+                            constrainSpring.SetSolverIterations(solverIterations);
+                        }
+                        for (int ii = 0; ii < springAxisEnable.Length; ii++)
+                        {
+                            constrainSpring.SetAxisEnable(ii, springAxisEnable[ii]);
+                            if (springDamping[ii] != BSAPITemplate.SPRING_NOT_SPECIFIED)
+                                constrainSpring.SetDamping(ii, springDamping[ii]);
+                            if (springStiffness[ii] != BSAPITemplate.SPRING_NOT_SPECIFIED)
+                                constrainSpring.SetStiffness(ii, springStiffness[ii]);
+                        }
+                        constrainSpring.CalculateTransforms();
+
+                        if (springLinearEquilibriumPoint != OMV.Vector3.Zero)
+                            constrainSpring.SetEquilibriumPoint(springLinearEquilibriumPoint, springAngularEquilibriumPoint);
+                        else
+                            constrainSpring.SetEquilibriumPoint(BSAPITemplate.SPRING_NOT_SPECIFIED, BSAPITemplate.SPRING_NOT_SPECIFIED);
+                    }
+                    break;
+                default:
+                    break;
+            }
+        }
+
+        // Return 'true' if the property updates from the physics engine should be reported
+        //    to the simulator.
+        // If the constraint is fixed, we don't need to report as the simulator and viewer will
+        //    report the right things.
+        public override bool ShouldUpdateChildProperties()
+        {
+            bool ret = true;
+            if (constraintType == ConstraintType.BS_FIXED_CONSTRAINT_TYPE)
+                ret = false;
+
+            return ret;
+        }
+    }
+
+    public BSLinksetConstraints(BSScene scene, BSPrimLinkable parent) : base(scene, parent)
+    {
+        LinksetImpl = LinksetImplementation.Constraint;
+    }
+
+    private static string LogHeader = "[BULLETSIM LINKSET CONSTRAINT]";
+
+    // When physical properties are changed the linkset needs to recalculate
+    //   its internal properties.
+    // This is queued in the 'post taint' queue so the
+    //   refresh will happen once after all the other taints are applied.
+    public override void Refresh(BSPrimLinkable requestor)
+    {
+        ScheduleRebuild(requestor);
+        base.Refresh(requestor);
+
+    }
+
+    private void ScheduleRebuild(BSPrimLinkable requestor)
+    {
+        DetailLog("{0},BSLinksetConstraint.ScheduleRebuild,,rebuilding={1},hasChildren={2},actuallyScheduling={3}",
+                            requestor.LocalID, Rebuilding, HasAnyChildren, (!Rebuilding && HasAnyChildren));
+
+        // When rebuilding, it is possible to set properties that would normally require a rebuild.
+        //    If already rebuilding, don't request another rebuild.
+        //    If a linkset with just a root prim (simple non-linked prim) don't bother rebuilding.
+        lock (this)
+        {
+            if (!RebuildScheduled)
+            {
+                if (!Rebuilding && HasAnyChildren)
+                {
+                    RebuildScheduled = true;
+                    // Queue to happen after all the other taint processing
+                    m_physicsScene.PostTaintObject("BSLinksetContraints.Refresh", requestor.LocalID, delegate()
+                    {
+                        if (HasAnyChildren)
+                        {
+                            // Constraints that have not been changed are not rebuild but make sure
+                            //     the constraint of the requestor is rebuilt.
+                            PhysicallyUnlinkAChildFromRoot(LinksetRoot, requestor);
+                            // Rebuild the linkset and all its constraints.
+                            RecomputeLinksetConstraints();
+                        }
+                        RebuildScheduled = false;
+                    });
+                }
+            }
+        }
+    }
+
+    // The object is going dynamic (physical). Do any setup necessary
+    //     for a dynamic linkset.
+    // Only the state of the passed object can be modified. The rest of the linkset
+    //     has not yet been fully constructed.
+    // Return 'true' if any properties updated on the passed object.
+    // Called at taint-time!
+    public override bool MakeDynamic(BSPrimLinkable child)
+    {
+        bool ret = false;
+        DetailLog("{0},BSLinksetConstraints.MakeDynamic,call,IsRoot={1}", child.LocalID, IsRoot(child));
+        if (IsRoot(child))
+        {
+            // The root is going dynamic. Rebuild the linkset so parts and mass get computed properly.
+            Refresh(LinksetRoot);
+        }
+        return ret;
+    }
+
+    // The object is going static (non-physical). Do any setup necessary for a static linkset.
+    // Return 'true' if any properties updated on the passed object.
+    // This doesn't normally happen -- OpenSim removes the objects from the physical
+    //     world if it is a static linkset.
+    // Called at taint-time!
+    public override bool MakeStatic(BSPrimLinkable child)
+    {
+        bool ret = false;
+
+        DetailLog("{0},BSLinksetConstraint.MakeStatic,call,IsRoot={1}", child.LocalID, IsRoot(child));
+        child.ClearDisplacement();
+        if (IsRoot(child))
+        {
+            // Schedule a rebuild to verify that the root shape is set to the real shape.
+            Refresh(LinksetRoot);
+        }
+        return ret;
+    }
+
+    // Called at taint-time!!
+    public override void UpdateProperties(UpdatedProperties whichUpdated, BSPrimLinkable pObj)
+    {
+        // Nothing to do for constraints on property updates
+    }
+
+    // Routine called when rebuilding the body of some member of the linkset.
+    // Destroy all the constraints have have been made to root and set
+    //     up to rebuild the constraints before the next simulation step.
+    // Returns 'true' of something was actually removed and would need restoring
+    // Called at taint-time!!
+    public override bool RemoveDependencies(BSPrimLinkable child)
+    {
+        bool ret = false;
+
+        DetailLog("{0},BSLinksetConstraint.RemoveDependencies,removeChildrenForRoot,rID={1},rBody={2}",
+                                    child.LocalID, LinksetRoot.LocalID, LinksetRoot.PhysBody.AddrString);
+
+        lock (m_linksetActivityLock)
+        {
+            // Just undo all the constraints for this linkset. Rebuild at the end of the step.
+            ret = PhysicallyUnlinkAllChildrenFromRoot(LinksetRoot);
+            // Cause the constraints, et al to be rebuilt before the next simulation step.
+            Refresh(LinksetRoot);
+        }
+        return ret;
+    }
+
+    // ================================================================
+
+    // Add a new child to the linkset.
+    // Called while LinkActivity is locked.
+    protected override void AddChildToLinkset(BSPrimLinkable child)
+    {
+        if (!HasChild(child))
+        {
+            m_children.Add(child, new BSLinkInfoConstraint(child));
+
+            DetailLog("{0},BSLinksetConstraints.AddChildToLinkset,call,child={1}", LinksetRoot.LocalID, child.LocalID);
+
+            // Cause constraints and assorted properties to be recomputed before the next simulation step.
+            Refresh(LinksetRoot);
+        }
+        return;
+    }
+
+    // Remove the specified child from the linkset.
+    // Safe to call even if the child is not really in my linkset.
+    protected override void RemoveChildFromLinkset(BSPrimLinkable child, bool inTaintTime)
+    {
+        if (m_children.Remove(child))
+        {
+            BSPrimLinkable rootx = LinksetRoot; // capture the root and body as of now
+            BSPrimLinkable childx = child;
+
+            DetailLog("{0},BSLinksetConstraints.RemoveChildFromLinkset,call,rID={1},rBody={2},cID={3},cBody={4}",
+                            childx.LocalID,
+                            rootx.LocalID, rootx.PhysBody.AddrString,
+                            childx.LocalID, childx.PhysBody.AddrString);
+
+            m_physicsScene.TaintedObject(inTaintTime, childx.LocalID, "BSLinksetConstraints.RemoveChildFromLinkset", delegate()
+            {
+                PhysicallyUnlinkAChildFromRoot(rootx, childx);
+            });
+            // See that the linkset parameters are recomputed at the end of the taint time.
+            Refresh(LinksetRoot);
+        }
+        else
+        {
+            // Non-fatal occurance.
+            // PhysicsScene.Logger.ErrorFormat("{0}: Asked to remove child from linkset that was not in linkset", LogHeader);
+        }
+        return;
+    }
+
+    // Create a constraint between me (root of linkset) and the passed prim (the child).
+    // Called at taint time!
+    private void PhysicallyLinkAChildToRoot(BSPrimLinkable rootPrim, BSPrimLinkable childPrim)
+    {
+        // Don't build the constraint when asked. Put it off until just before the simulation step.
+        Refresh(rootPrim);
+    }
+
+    // Create a static constraint between the two passed objects
+    private BSConstraint BuildConstraint(BSPrimLinkable rootPrim, BSLinkInfo li)
+    {
+        BSLinkInfoConstraint linkInfo = li as BSLinkInfoConstraint;
+        if (linkInfo == null)
+            return null;
+
+        // Zero motion for children so they don't interpolate
+        li.member.ZeroMotion(true);
+
+        BSConstraint constrain = null;
+
+        switch (linkInfo.constraintType)
+        {
+            case ConstraintType.BS_FIXED_CONSTRAINT_TYPE:
+            case ConstraintType.D6_CONSTRAINT_TYPE:
+                // Relative position normalized to the root prim
+                // Essentually a vector pointing from center of rootPrim to center of li.member
+                OMV.Vector3 childRelativePosition = linkInfo.member.Position - rootPrim.Position;
+
+                // real world coordinate of midpoint between the two objects
+                OMV.Vector3 midPoint = rootPrim.Position + (childRelativePosition / 2);
+
+                DetailLog("{0},BSLinksetConstraint.BuildConstraint,6Dof,rBody={1},cBody={2},rLoc={3},cLoc={4},midLoc={5}",
+                                                rootPrim.LocalID, rootPrim.PhysBody, linkInfo.member.PhysBody,
+                                                rootPrim.Position, linkInfo.member.Position, midPoint);
+
+                // create a constraint that allows no freedom of movement between the two objects
+                // http://bulletphysics.org/Bullet/phpBB3/viewtopic.php?t=4818
+
+                constrain = new BSConstraint6Dof(
+                                    m_physicsScene.World, rootPrim.PhysBody, linkInfo.member.PhysBody, midPoint, true, true );
+
+                /* NOTE: below is an attempt to build constraint with full frame computation, etc.
+                 *     Using the midpoint is easier since it lets the Bullet code manipulate the transforms
+                 *     of the objects.
+                 * Code left for future programmers.
+                // ==================================================================================
+                // relative position normalized to the root prim
+                OMV.Quaternion invThisOrientation = OMV.Quaternion.Inverse(rootPrim.Orientation);
+                OMV.Vector3 childRelativePosition = (liConstraint.member.Position - rootPrim.Position) * invThisOrientation;
+
+                // relative rotation of the child to the parent
+                OMV.Quaternion childRelativeRotation = invThisOrientation * liConstraint.member.Orientation;
+                OMV.Quaternion inverseChildRelativeRotation = OMV.Quaternion.Inverse(childRelativeRotation);
+
+                DetailLog("{0},BSLinksetConstraint.PhysicallyLinkAChildToRoot,taint,root={1},child={2}", rootPrim.LocalID, rootPrim.LocalID, liConstraint.member.LocalID);
+                constrain = new BS6DofConstraint(
+                                PhysicsScene.World, rootPrim.Body, liConstraint.member.Body,
+                                OMV.Vector3.Zero,
+                                OMV.Quaternion.Inverse(rootPrim.Orientation),
+                                OMV.Vector3.Zero,
+                                OMV.Quaternion.Inverse(liConstraint.member.Orientation),
+                                true,
+                                true
+                                );
+                // ==================================================================================
+                */
+
+                break;
+            case ConstraintType.D6_SPRING_CONSTRAINT_TYPE:
+                constrain = new BSConstraintSpring(m_physicsScene.World, rootPrim.PhysBody, linkInfo.member.PhysBody,
+                                linkInfo.frameInAloc, linkInfo.frameInArot, linkInfo.frameInBloc, linkInfo.frameInBrot,
+                                linkInfo.useLinearReferenceFrameA,
+                                true /*disableCollisionsBetweenLinkedBodies*/);
+                DetailLog("{0},BSLinksetConstraint.BuildConstraint,spring,root={1},rBody={2},child={3},cBody={4},rLoc={5},cLoc={6}",
+                                                rootPrim.LocalID,
+                                                rootPrim.LocalID, rootPrim.PhysBody.AddrString,
+                                                linkInfo.member.LocalID, linkInfo.member.PhysBody.AddrString,
+                                                rootPrim.Position, linkInfo.member.Position);
+
+                break;
+            default:
+                break;
+        }
+
+        linkInfo.SetLinkParameters(constrain);
+
+        m_physicsScene.Constraints.AddConstraint(constrain);
+
+        return constrain;
+    }
+
+    // Remove linkage between the linkset root and a particular child
+    // The root and child bodies are passed in because we need to remove the constraint between
+    //      the bodies that were present at unlink time.
+    // Called at taint time!
+    private bool PhysicallyUnlinkAChildFromRoot(BSPrimLinkable rootPrim, BSPrimLinkable childPrim)
+    {
+        bool ret = false;
+        DetailLog("{0},BSLinksetConstraint.PhysicallyUnlinkAChildFromRoot,taint,root={1},rBody={2},child={3},cBody={4}",
+                            rootPrim.LocalID,
+                            rootPrim.LocalID, rootPrim.PhysBody.AddrString,
+                            childPrim.LocalID, childPrim.PhysBody.AddrString);
+
+        // If asked to unlink root from root, just remove all the constraints
+        if (rootPrim == childPrim || childPrim == LinksetRoot)
+        {
+            PhysicallyUnlinkAllChildrenFromRoot(LinksetRoot);
+            ret = true;
+        }
+        else
+        {
+            // Find the constraint for this link and get rid of it from the overall collection and from my list
+            if (m_physicsScene.Constraints.RemoveAndDestroyConstraint(rootPrim.PhysBody, childPrim.PhysBody))
+            {
+                // Make the child refresh its location
+                m_physicsScene.PE.PushUpdate(childPrim.PhysBody);
+                ret = true;
+            }
+        }
+
+        return ret;
+    }
+
+    // Remove linkage between myself and any possible children I might have.
+    // Returns 'true' of any constraints were destroyed.
+    // Called at taint time!
+    private bool PhysicallyUnlinkAllChildrenFromRoot(BSPrimLinkable rootPrim)
+    {
+        DetailLog("{0},BSLinksetConstraint.PhysicallyUnlinkAllChildren,taint", rootPrim.LocalID);
+
+        return m_physicsScene.Constraints.RemoveAndDestroyConstraint(rootPrim.PhysBody);
+    }
+
+    // Call each of the constraints that make up this linkset and recompute the
+    //    various transforms and variables. Create constraints of not created yet.
+    // Called before the simulation step to make sure the constraint based linkset
+    //    is all initialized.
+    // Called at taint time!!
+    private void RecomputeLinksetConstraints()
+    {
+        float linksetMass = LinksetMass;
+        LinksetRoot.UpdatePhysicalMassProperties(linksetMass, true);
+
+        DetailLog("{0},BSLinksetConstraint.RecomputeLinksetConstraints,set,rBody={1},linksetMass={2}",
+                            LinksetRoot.LocalID, LinksetRoot.PhysBody.AddrString, linksetMass);
+
+        try
+        {
+            Rebuilding = true;
+
+            // There is no reason to build all this physical stuff for a non-physical linkset.
+            if (!LinksetRoot.IsPhysicallyActive || !HasAnyChildren)
+            {
+                DetailLog("{0},BSLinksetConstraint.RecomputeLinksetCompound,notPhysicalOrNoChildren", LinksetRoot.LocalID);
+                return; // Note the 'finally' clause at the botton which will get executed.
+            }
+
+            ForEachLinkInfo((li) =>
+            {
+                // A child in the linkset physically shows the mass of the whole linkset.
+                // This allows Bullet to apply enough force on the child to move the whole linkset.
+                // (Also do the mass stuff before recomputing the constraint so mass is not zero.)
+                li.member.UpdatePhysicalMassProperties(linksetMass, true);
+
+                BSConstraint constrain;
+                if (!m_physicsScene.Constraints.TryGetConstraint(LinksetRoot.PhysBody, li.member.PhysBody, out constrain))
+                {
+                    // If constraint doesn't exist yet, create it.
+                    constrain = BuildConstraint(LinksetRoot, li);
+                }
+                li.SetLinkParameters(constrain);
+                constrain.RecomputeConstraintVariables(linksetMass);
+
+                // PhysicsScene.PE.DumpConstraint(PhysicsScene.World, constrain.Constraint);    // DEBUG DEBUG
+                return false;   // 'false' says to keep processing other members
+            });
+        }
+        finally
+        {
+            Rebuilding = false;
+        }
+    }
+
+    #region Extension
+    public override object Extension(string pFunct, params object[] pParams)
+    {
+        object ret = null;
+        switch (pFunct)
+        {
+            // pParams = [ BSPhysObject root, BSPhysObject child, integer linkType ]
+            case ExtendedPhysics.PhysFunctChangeLinkType:
+                if (pParams.Length > 2)
+                {
+                    int requestedType = (int)pParams[2];
+                    DetailLog("{0},BSLinksetConstraint.ChangeLinkType,requestedType={1}", LinksetRoot.LocalID, requestedType);
+                    if (requestedType == (int)ConstraintType.BS_FIXED_CONSTRAINT_TYPE
+                        || requestedType == (int)ConstraintType.D6_CONSTRAINT_TYPE
+                        || requestedType == (int)ConstraintType.D6_SPRING_CONSTRAINT_TYPE
+                        || requestedType == (int)ConstraintType.HINGE_CONSTRAINT_TYPE
+                        || requestedType == (int)ConstraintType.CONETWIST_CONSTRAINT_TYPE
+                        || requestedType == (int)ConstraintType.SLIDER_CONSTRAINT_TYPE)
+                    {
+                        BSPrimLinkable child = pParams[1] as BSPrimLinkable;
+                        if (child != null)
+                        {
+                            DetailLog("{0},BSLinksetConstraint.ChangeLinkType,rootID={1},childID={2},type={3}",
+                                                    LinksetRoot.LocalID, LinksetRoot.LocalID, child.LocalID, requestedType);
+                            m_physicsScene.TaintedObject(child.LocalID, "BSLinksetConstraint.PhysFunctChangeLinkType", delegate()
+                            {
+                                // Pick up all the constraints currently created.
+                                RemoveDependencies(child);
+
+                                BSLinkInfo linkInfo = null;
+                                if (TryGetLinkInfo(child, out linkInfo))
+                                {
+                                    BSLinkInfoConstraint linkInfoC = linkInfo as BSLinkInfoConstraint;
+                                    if (linkInfoC != null)
+                                    {
+                                        linkInfoC.constraintType = (ConstraintType)requestedType;
+                                        ret = (object)true;
+                                        DetailLog("{0},BSLinksetConstraint.ChangeLinkType,link={1},type={2}",
+                                                    linkInfo.member.LocalID, linkInfo.member.LocalID, linkInfoC.constraintType);
+                                    }
+                                    else
+                                    {
+                                        DetailLog("{0},BSLinksetConstraint.ChangeLinkType,linkInfoNotConstraint,childID={1}", LinksetRoot.LocalID, child.LocalID);
+                                    }
+                                }
+                                else
+                                {
+                                    DetailLog("{0},BSLinksetConstraint.ChangeLinkType,noLinkInfoForChild,childID={1}", LinksetRoot.LocalID, child.LocalID);
+                                }
+                                // Cause the whole linkset to be rebuilt in post-taint time.
+                                Refresh(child);
+                            });
+                        }
+                        else
+                        {
+                            DetailLog("{0},BSLinksetConstraint.SetLinkType,childNotBSPrimLinkable", LinksetRoot.LocalID);
+                        }
+                    }
+                    else
+                    {
+                        DetailLog("{0},BSLinksetConstraint.SetLinkType,illegalRequestedType,reqested={1},spring={2}",
+                                        LinksetRoot.LocalID, requestedType, ((int)ConstraintType.D6_SPRING_CONSTRAINT_TYPE));
+                    }
+                }
+                break;
+            // pParams = [ BSPhysObject root, BSPhysObject child ]
+            case ExtendedPhysics.PhysFunctGetLinkType:
+                if (pParams.Length > 0)
+                {
+                    BSPrimLinkable child = pParams[1] as BSPrimLinkable;
+                    if (child != null)
+                    {
+                        BSLinkInfo linkInfo = null;
+                        if (TryGetLinkInfo(child, out linkInfo))
+                        {
+                            BSLinkInfoConstraint linkInfoC = linkInfo as BSLinkInfoConstraint;
+                            if (linkInfoC != null)
+                            {
+                                ret = (object)(int)linkInfoC.constraintType;
+                                DetailLog("{0},BSLinksetConstraint.GetLinkType,link={1},type={2}",
+                                            linkInfo.member.LocalID, linkInfo.member.LocalID, linkInfoC.constraintType);
+
+                            }
+                        }
+                    }
+                }
+                break;
+            // pParams = [ BSPhysObject root, BSPhysObject child, int op, object opParams, int op, object opParams, ... ]
+            case ExtendedPhysics.PhysFunctChangeLinkParams:
+                // There should be two parameters: the childActor and a list of parameters to set
+                if (pParams.Length > 2)
+                {
+                    BSPrimLinkable child = pParams[1] as BSPrimLinkable;
+                    BSLinkInfo baseLinkInfo = null;
+                    if (TryGetLinkInfo(child, out baseLinkInfo))
+                    {
+                        BSLinkInfoConstraint linkInfo = baseLinkInfo as BSLinkInfoConstraint;
+                        if (linkInfo != null)
+                        {
+                            int valueInt;
+                            float valueFloat;
+                            bool valueBool;
+                            OMV.Vector3 valueVector;
+                            OMV.Vector3 valueVector2;
+                            OMV.Quaternion valueQuaternion;
+                            int axisLow, axisHigh;
+
+                            int opIndex = 2;
+                            while (opIndex < pParams.Length)
+                            {
+                                int thisOp = 0;
+                                string errMsg = "";
+                                try
+                                {
+                                    thisOp = (int)pParams[opIndex];
+                                    DetailLog("{0},BSLinksetConstraint.ChangeLinkParams2,op={1},val={2}",
+                                                        linkInfo.member.LocalID, thisOp, pParams[opIndex + 1]);
+                                    switch (thisOp)
+                                    {
+                                        case ExtendedPhysics.PHYS_PARAM_LINK_TYPE:
+                                            valueInt = (int)pParams[opIndex + 1];
+                                            ConstraintType valueType = (ConstraintType)valueInt;
+                                            if (valueType == ConstraintType.BS_FIXED_CONSTRAINT_TYPE
+                                                || valueType == ConstraintType.D6_CONSTRAINT_TYPE
+                                                || valueType == ConstraintType.D6_SPRING_CONSTRAINT_TYPE
+                                                || valueType == ConstraintType.HINGE_CONSTRAINT_TYPE
+                                                || valueType == ConstraintType.CONETWIST_CONSTRAINT_TYPE
+                                                || valueType == ConstraintType.SLIDER_CONSTRAINT_TYPE)
+                                            {
+                                                linkInfo.constraintType = valueType;
+                                            }
+                                            opIndex += 2;
+                                            break;
+                                        case ExtendedPhysics.PHYS_PARAM_FRAMEINA_LOC:
+                                            errMsg = "PHYS_PARAM_FRAMEINA_LOC takes one parameter of type vector";
+                                            valueVector = (OMV.Vector3)pParams[opIndex + 1];
+                                            linkInfo.frameInAloc = valueVector;
+                                            opIndex += 2;
+                                            break;
+                                        case ExtendedPhysics.PHYS_PARAM_FRAMEINA_ROT:
+                                            errMsg = "PHYS_PARAM_FRAMEINA_ROT takes one parameter of type rotation";
+                                            valueQuaternion = (OMV.Quaternion)pParams[opIndex + 1];
+                                            linkInfo.frameInArot = valueQuaternion;
+                                            opIndex += 2;
+                                            break;
+                                        case ExtendedPhysics.PHYS_PARAM_FRAMEINB_LOC:
+                                            errMsg = "PHYS_PARAM_FRAMEINB_LOC takes one parameter of type vector";
+                                            valueVector = (OMV.Vector3)pParams[opIndex + 1];
+                                            linkInfo.frameInBloc = valueVector;
+                                            opIndex += 2;
+                                            break;
+                                        case ExtendedPhysics.PHYS_PARAM_FRAMEINB_ROT:
+                                            errMsg = "PHYS_PARAM_FRAMEINB_ROT takes one parameter of type rotation";
+                                            valueQuaternion = (OMV.Quaternion)pParams[opIndex + 1];
+                                            linkInfo.frameInBrot = valueQuaternion;
+                                            opIndex += 2;
+                                            break;
+                                        case ExtendedPhysics.PHYS_PARAM_LINEAR_LIMIT_LOW:
+                                            errMsg = "PHYS_PARAM_LINEAR_LIMIT_LOW takes one parameter of type vector";
+                                            valueVector = (OMV.Vector3)pParams[opIndex + 1];
+                                            linkInfo.linearLimitLow = valueVector;
+                                            opIndex += 2;
+                                            break;
+                                        case ExtendedPhysics.PHYS_PARAM_LINEAR_LIMIT_HIGH:
+                                            errMsg = "PHYS_PARAM_LINEAR_LIMIT_HIGH takes one parameter of type vector";
+                                            valueVector = (OMV.Vector3)pParams[opIndex + 1];
+                                            linkInfo.linearLimitHigh = valueVector;
+                                            opIndex += 2;
+                                            break;
+                                        case ExtendedPhysics.PHYS_PARAM_ANGULAR_LIMIT_LOW:
+                                            errMsg = "PHYS_PARAM_ANGULAR_LIMIT_LOW takes one parameter of type vector";
+                                            valueVector = (OMV.Vector3)pParams[opIndex + 1];
+                                            linkInfo.angularLimitLow = valueVector;
+                                            opIndex += 2;
+                                            break;
+                                        case ExtendedPhysics.PHYS_PARAM_ANGULAR_LIMIT_HIGH:
+                                            errMsg = "PHYS_PARAM_ANGULAR_LIMIT_HIGH takes one parameter of type vector";
+                                            valueVector = (OMV.Vector3)pParams[opIndex + 1];
+                                            linkInfo.angularLimitHigh = valueVector;
+                                            opIndex += 2;
+                                            break;
+                                        case ExtendedPhysics.PHYS_PARAM_USE_FRAME_OFFSET:
+                                            errMsg = "PHYS_PARAM_USE_FRAME_OFFSET takes one parameter of type integer (bool)";
+                                            valueBool = ((int)pParams[opIndex + 1]) != 0;
+                                            linkInfo.useFrameOffset = valueBool;
+                                            opIndex += 2;
+                                            break;
+                                        case ExtendedPhysics.PHYS_PARAM_ENABLE_TRANSMOTOR:
+                                            errMsg = "PHYS_PARAM_ENABLE_TRANSMOTOR takes one parameter of type integer (bool)";
+                                            valueBool = ((int)pParams[opIndex + 1]) != 0;
+                                            linkInfo.enableTransMotor = valueBool;
+                                            opIndex += 2;
+                                            break;
+                                        case ExtendedPhysics.PHYS_PARAM_TRANSMOTOR_MAXVEL:
+                                            errMsg = "PHYS_PARAM_TRANSMOTOR_MAXVEL takes one parameter of type float";
+                                            valueFloat = (float)pParams[opIndex + 1];
+                                            linkInfo.transMotorMaxVel = valueFloat;
+                                            opIndex += 2;
+                                            break;
+                                        case ExtendedPhysics.PHYS_PARAM_TRANSMOTOR_MAXFORCE:
+                                            errMsg = "PHYS_PARAM_TRANSMOTOR_MAXFORCE takes one parameter of type float";
+                                            valueFloat = (float)pParams[opIndex + 1];
+                                            linkInfo.transMotorMaxForce = valueFloat;
+                                            opIndex += 2;
+                                            break;
+                                        case ExtendedPhysics.PHYS_PARAM_CFM:
+                                            errMsg = "PHYS_PARAM_CFM takes one parameter of type float";
+                                            valueFloat = (float)pParams[opIndex + 1];
+                                            linkInfo.cfm = valueFloat;
+                                            opIndex += 2;
+                                            break;
+                                        case ExtendedPhysics.PHYS_PARAM_ERP:
+                                            errMsg = "PHYS_PARAM_ERP takes one parameter of type float";
+                                            valueFloat = (float)pParams[opIndex + 1];
+                                            linkInfo.erp = valueFloat;
+                                            opIndex += 2;
+                                            break;
+                                        case ExtendedPhysics.PHYS_PARAM_SOLVER_ITERATIONS:
+                                            errMsg = "PHYS_PARAM_SOLVER_ITERATIONS takes one parameter of type float";
+                                            valueFloat = (float)pParams[opIndex + 1];
+                                            linkInfo.solverIterations = valueFloat;
+                                            opIndex += 2;
+                                            break;
+                                        case ExtendedPhysics.PHYS_PARAM_SPRING_AXIS_ENABLE:
+                                            errMsg = "PHYS_PARAM_SPRING_AXIS_ENABLE takes two parameters of types integer and integer (bool)";
+                                            valueInt = (int)pParams[opIndex + 1];
+                                            valueBool = ((int)pParams[opIndex + 2]) != 0;
+                                            GetAxisRange(valueInt, out axisLow, out axisHigh);
+                                            for (int ii = axisLow; ii <= axisHigh; ii++)
+                                                linkInfo.springAxisEnable[ii] = valueBool;
+                                            opIndex += 3;
+                                            break;
+                                        case ExtendedPhysics.PHYS_PARAM_SPRING_DAMPING:
+                                            errMsg = "PHYS_PARAM_SPRING_DAMPING takes two parameters of types integer and float";
+                                            valueInt = (int)pParams[opIndex + 1];
+                                            valueFloat = (float)pParams[opIndex + 2];
+                                            GetAxisRange(valueInt, out axisLow, out axisHigh);
+                                            for (int ii = axisLow; ii <= axisHigh; ii++)
+                                                linkInfo.springDamping[ii] = valueFloat;
+                                            opIndex += 3;
+                                            break;
+                                        case ExtendedPhysics.PHYS_PARAM_SPRING_STIFFNESS:
+                                            errMsg = "PHYS_PARAM_SPRING_STIFFNESS takes two parameters of types integer and float";
+                                            valueInt = (int)pParams[opIndex + 1];
+                                            valueFloat = (float)pParams[opIndex + 2];
+                                            GetAxisRange(valueInt, out axisLow, out axisHigh);
+                                            for (int ii = axisLow; ii <= axisHigh; ii++)
+                                                linkInfo.springStiffness[ii] = valueFloat;
+                                            opIndex += 3;
+                                            break;
+                                        case ExtendedPhysics.PHYS_PARAM_SPRING_EQUILIBRIUM_POINT:
+                                            errMsg = "PHYS_PARAM_SPRING_EQUILIBRIUM_POINT takes two parameters of type vector";
+                                            valueVector = (OMV.Vector3)pParams[opIndex + 1];
+                                            valueVector2 = (OMV.Vector3)pParams[opIndex + 2];
+                                            linkInfo.springLinearEquilibriumPoint = valueVector;
+                                            linkInfo.springAngularEquilibriumPoint = valueVector2;
+                                            opIndex += 3;
+                                            break;
+                                        case ExtendedPhysics.PHYS_PARAM_USE_LINEAR_FRAMEA:
+                                            errMsg = "PHYS_PARAM_USE_LINEAR_FRAMEA takes one parameter of type integer (bool)";
+                                            valueBool = ((int)pParams[opIndex + 1]) != 0;
+                                            linkInfo.useLinearReferenceFrameA = valueBool;
+                                            opIndex += 2;
+                                            break;
+                                        default:
+                                            break;
+                                    }
+                                }
+                                catch (InvalidCastException e)
+                                {
+                                    m_physicsScene.Logger.WarnFormat("{0} value of wrong type in physSetLinksetParams: {1}, err={2}",
+                                                        LogHeader, errMsg, e);
+                                }
+                                catch (Exception e)
+                                {
+                                    m_physicsScene.Logger.WarnFormat("{0} bad parameters in physSetLinksetParams: {1}", LogHeader, e);
+                                }
+                            }
+                        }
+                        // Something changed so a rebuild is in order
+                        Refresh(child);
+                    }
+                }
+            break;
+            default:
+                ret = base.Extension(pFunct, pParams);
+                break;
+        }
+        return ret;
+    }
+
+    // Bullet constraints keep some limit parameters for each linear and angular axis.
+    // Setting same is easier if there is an easy way to see all or types.
+    // This routine returns the array limits for the set of axis.
+    private void GetAxisRange(int rangeSpec, out int low, out int high)
+    {
+        switch (rangeSpec)
+        {
+            case ExtendedPhysics.PHYS_AXIS_LINEAR_ALL:
+                low = 0;
+                high = 2;
+                break;
+            case ExtendedPhysics.PHYS_AXIS_ANGULAR_ALL:
+                low = 3;
+                high = 5;
+                break;
+            case ExtendedPhysics.PHYS_AXIS_ALL:
+                low = 0;
+                high = 5;
+                break;
+            default:
+                low = high = rangeSpec;
+                break;
+        }
+        return;
+    }
+    #endregion // Extension
+
+}
+}
diff --git a/OpenSim/Region/PhysicsModules/BulletS/BSMaterials.cs b/OpenSim/Region/PhysicsModules/BulletS/BSMaterials.cs
new file mode 100755
index 0000000..0e44d03
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/BSMaterials.cs
@@ -0,0 +1,203 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyrightD
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+using System;
+using System.Collections.Generic;
+using System.Text;
+using System.Reflection;
+using Nini.Config;
+
+namespace OpenSim.Region.PhysicsModule.BulletS
+{
+
+public struct MaterialAttributes
+{
+    // Material type values that correspond with definitions for LSL
+    public enum Material : int
+    {
+        Stone = 0,
+        Metal,
+        Glass,
+        Wood,
+        Flesh,
+        Plastic,
+        Rubber,
+        Light,
+        // Hereafter are BulletSim additions
+        Avatar,
+        NumberOfTypes   // the count of types in the enum.
+    }
+
+    // Names must be in the order of the above enum.
+    // These names must coorespond to the lower case field names in the MaterialAttributes
+    //     structure as reflection is used to select the field to put the value in.
+    public static readonly string[] MaterialAttribs = { "Density", "Friction", "Restitution"};
+
+    public MaterialAttributes(string t, float d, float f, float r)
+    {
+        type = t;
+        density = d;
+        friction = f;
+        restitution = r;
+    }
+    public string type;
+    public float density;
+    public float friction;
+    public float restitution;
+}
+
+public static class BSMaterials
+{
+    // Attributes for each material type
+    private static readonly MaterialAttributes[] Attributes;
+
+    // Map of material name to material type code
+    public static readonly Dictionary<string, MaterialAttributes.Material> MaterialMap;
+
+    static BSMaterials()
+    {
+        // Attribute sets for both the non-physical and physical instances of materials.
+        Attributes = new MaterialAttributes[(int)MaterialAttributes.Material.NumberOfTypes * 2];
+
+        // Map of name to type code.
+        MaterialMap = new Dictionary<string, MaterialAttributes.Material>();
+        MaterialMap.Add("Stone", MaterialAttributes.Material.Stone);
+        MaterialMap.Add("Metal", MaterialAttributes.Material.Metal);
+        MaterialMap.Add("Glass", MaterialAttributes.Material.Glass);
+        MaterialMap.Add("Wood", MaterialAttributes.Material.Wood);
+        MaterialMap.Add("Flesh", MaterialAttributes.Material.Flesh);
+        MaterialMap.Add("Plastic", MaterialAttributes.Material.Plastic);
+        MaterialMap.Add("Rubber", MaterialAttributes.Material.Rubber);
+        MaterialMap.Add("Light", MaterialAttributes.Material.Light);
+        MaterialMap.Add("Avatar", MaterialAttributes.Material.Avatar);
+    }
+
+    // This is where all the default material attributes are defined.
+    public static void InitializeFromDefaults(ConfigurationParameters parms)
+    {
+        // Values from http://wiki.secondlife.com/wiki/PRIM_MATERIAL
+        float dDensity = parms.defaultDensity;
+        float dFriction = parms.defaultFriction;
+        float dRestitution = parms.defaultRestitution;
+        Attributes[(int)MaterialAttributes.Material.Stone] =
+                    new MaterialAttributes("stone",dDensity, 0.8f, 0.4f);
+        Attributes[(int)MaterialAttributes.Material.Metal] =
+                    new MaterialAttributes("metal",dDensity, 0.3f, 0.4f);
+        Attributes[(int)MaterialAttributes.Material.Glass] =
+                    new MaterialAttributes("glass",dDensity, 0.2f, 0.7f);
+        Attributes[(int)MaterialAttributes.Material.Wood] =
+                    new MaterialAttributes("wood",dDensity, 0.6f, 0.5f);
+        Attributes[(int)MaterialAttributes.Material.Flesh] =
+                    new MaterialAttributes("flesh",dDensity, 0.9f, 0.3f);
+        Attributes[(int)MaterialAttributes.Material.Plastic] =
+                    new MaterialAttributes("plastic",dDensity, 0.4f, 0.7f);
+        Attributes[(int)MaterialAttributes.Material.Rubber] =
+                    new MaterialAttributes("rubber",dDensity, 0.9f, 0.9f);
+        Attributes[(int)MaterialAttributes.Material.Light] =
+                    new MaterialAttributes("light",dDensity, dFriction, dRestitution);
+        Attributes[(int)MaterialAttributes.Material.Avatar] =
+                    new MaterialAttributes("avatar",3.5f, 0.2f, 0f);
+
+        Attributes[(int)MaterialAttributes.Material.Stone + (int)MaterialAttributes.Material.NumberOfTypes] =
+                    new MaterialAttributes("stonePhysical",dDensity, 0.8f, 0.4f);
+        Attributes[(int)MaterialAttributes.Material.Metal + (int)MaterialAttributes.Material.NumberOfTypes] =
+                    new MaterialAttributes("metalPhysical",dDensity, 0.3f, 0.4f);
+        Attributes[(int)MaterialAttributes.Material.Glass + (int)MaterialAttributes.Material.NumberOfTypes] =
+                    new MaterialAttributes("glassPhysical",dDensity, 0.2f, 0.7f);
+        Attributes[(int)MaterialAttributes.Material.Wood + (int)MaterialAttributes.Material.NumberOfTypes] =
+                    new MaterialAttributes("woodPhysical",dDensity, 0.6f, 0.5f);
+        Attributes[(int)MaterialAttributes.Material.Flesh + (int)MaterialAttributes.Material.NumberOfTypes] =
+                    new MaterialAttributes("fleshPhysical",dDensity, 0.9f, 0.3f);
+        Attributes[(int)MaterialAttributes.Material.Plastic + (int)MaterialAttributes.Material.NumberOfTypes] =
+                    new MaterialAttributes("plasticPhysical",dDensity, 0.4f, 0.7f);
+        Attributes[(int)MaterialAttributes.Material.Rubber + (int)MaterialAttributes.Material.NumberOfTypes] =
+                    new MaterialAttributes("rubberPhysical",dDensity, 0.9f, 0.9f);
+        Attributes[(int)MaterialAttributes.Material.Light + (int)MaterialAttributes.Material.NumberOfTypes] =
+                    new MaterialAttributes("lightPhysical",dDensity, dFriction, dRestitution);
+        Attributes[(int)MaterialAttributes.Material.Avatar + (int)MaterialAttributes.Material.NumberOfTypes] =
+                    new MaterialAttributes("avatarPhysical",3.5f, 0.2f, 0f);
+    }
+
+    // Under the [BulletSim] section, one can change the individual material
+    //    attribute values. The format of the configuration parameter is:
+    //        <materialName><Attribute>["Physical"] = floatValue
+    //    For instance:
+    //        [BulletSim]
+    //             StoneFriction = 0.2
+    //             FleshRestitutionPhysical = 0.8
+    // Materials can have different parameters for their static and
+    //    physical instantiations. When setting the non-physical value,
+    //    both values are changed. Setting the physical value only changes
+    //    the physical value.
+    public static void InitializefromParameters(IConfig pConfig)
+    {
+        foreach (KeyValuePair<string, MaterialAttributes.Material> kvp in MaterialMap)
+        {
+            string matName = kvp.Key;
+            foreach (string attribName in MaterialAttributes.MaterialAttribs)
+            {
+                string paramName = matName + attribName;
+                if (pConfig.Contains(paramName))
+                {
+                    float paramValue = pConfig.GetFloat(paramName);
+                    SetAttributeValue((int)kvp.Value, attribName, paramValue);
+                    // set the physical value also
+                    SetAttributeValue((int)kvp.Value + (int)MaterialAttributes.Material.NumberOfTypes, attribName, paramValue);
+                }
+                paramName += "Physical";
+                if (pConfig.Contains(paramName))
+                {
+                    float paramValue = pConfig.GetFloat(paramName);
+                    SetAttributeValue((int)kvp.Value + (int)MaterialAttributes.Material.NumberOfTypes, attribName, paramValue);
+                }
+            }
+        }
+    }
+
+    // Use reflection to set the value in the attribute structure.
+    private static void SetAttributeValue(int matType, string attribName, float val)
+    {
+        // Get the current attribute values for this material
+        MaterialAttributes thisAttrib = Attributes[matType];
+        // Find the field for the passed attribute name (eg, find field named 'friction')
+        FieldInfo fieldInfo = thisAttrib.GetType().GetField(attribName.ToLower());
+        if (fieldInfo != null)
+        {
+            fieldInfo.SetValue(thisAttrib, val);
+            // Copy new attributes back to array -- since MaterialAttributes is 'struct', passed by value, not reference.
+            Attributes[matType] = thisAttrib;
+        }
+    }
+
+    // Given a material type, return a structure of attributes.
+    public static MaterialAttributes GetAttributes(MaterialAttributes.Material type, bool isPhysical)
+    {
+        int ind = (int)type;
+        if (isPhysical) ind += (int)MaterialAttributes.Material.NumberOfTypes;
+        return Attributes[ind];
+    }
+}
+}
diff --git a/OpenSim/Region/PhysicsModules/BulletS/BSMotors.cs b/OpenSim/Region/PhysicsModules/BulletS/BSMotors.cs
new file mode 100755
index 0000000..2faf2d4
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/BSMotors.cs
@@ -0,0 +1,451 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+using System;
+using System.Collections.Generic;
+using System.Text;
+using OpenMetaverse;
+using OpenSim.Framework;
+
+namespace OpenSim.Region.PhysicsModule.BulletS
+{
+public abstract class BSMotor
+{
+    // Timescales and other things can be turned off by setting them to 'infinite'.
+    public const float Infinite = 12345.6f;
+    public readonly static Vector3 InfiniteVector = new Vector3(BSMotor.Infinite, BSMotor.Infinite, BSMotor.Infinite);
+
+    public BSMotor(string useName)
+    {
+        UseName = useName;
+        PhysicsScene = null;
+        Enabled = true;
+    }
+    public virtual bool Enabled { get; set; }
+    public virtual void Reset() { }
+    public virtual void Zero() { }
+    public virtual void GenerateTestOutput(float timeStep) { }
+
+    // A name passed at motor creation for easily identifyable debugging messages.
+    public string UseName { get; private set; }
+
+    // Used only for outputting debug information. Might not be set so check for null.
+    public BSScene PhysicsScene { get; set; }
+    protected void MDetailLog(string msg, params Object[] parms)
+    {
+        if (PhysicsScene != null)
+        {
+            PhysicsScene.DetailLog(msg, parms);
+        }
+    }
+}
+
+// Motor which moves CurrentValue to TargetValue over TimeScale seconds.
+// The TargetValue decays in TargetValueDecayTimeScale.
+// This motor will "zero itself" over time in that the targetValue will
+//    decay to zero and the currentValue will follow it to that zero.
+//    The overall effect is for the returned correction value to go from large
+//    values to small and eventually zero values.
+// TimeScale and TargetDelayTimeScale may be 'infinite' which means no decay.
+
+// For instance, if something is moving at speed X and the desired speed is Y,
+//    CurrentValue is X and TargetValue is Y. As the motor is stepped, new
+//    values of CurrentValue are returned that approach the TargetValue.
+// The feature of decaying TargetValue is so vehicles will eventually
+//    come to a stop rather than run forever. This can be disabled by
+//    setting TargetValueDecayTimescale to 'infinite'.
+// The change from CurrentValue to TargetValue is linear over TimeScale seconds.
+public class BSVMotor : BSMotor
+{
+    // public Vector3 FrameOfReference { get; set; }
+    // public Vector3 Offset { get; set; }
+
+    public virtual float TimeScale { get; set; }
+    public virtual float TargetValueDecayTimeScale { get; set; }
+    public virtual float Efficiency { get; set; }
+
+    public virtual float ErrorZeroThreshold { get; set; }
+
+    public virtual Vector3 TargetValue { get; protected set; }
+    public virtual Vector3 CurrentValue { get; protected set; }
+    public virtual Vector3 LastError { get; protected set; }
+
+    public virtual bool ErrorIsZero()
+    {
+        return ErrorIsZero(LastError);
+    }
+    public virtual bool ErrorIsZero(Vector3 err)
+    {
+        return (err == Vector3.Zero || err.ApproxEquals(Vector3.Zero, ErrorZeroThreshold));
+    }
+
+    public BSVMotor(string useName)
+        : base(useName)
+    {
+        TimeScale = TargetValueDecayTimeScale = BSMotor.Infinite;
+        Efficiency = 1f;
+        CurrentValue = TargetValue = Vector3.Zero;
+        ErrorZeroThreshold = 0.001f;
+    }
+    public BSVMotor(string useName, float timeScale, float decayTimeScale, float efficiency)
+        : this(useName)
+    {
+        TimeScale = timeScale;
+        TargetValueDecayTimeScale = decayTimeScale;
+        Efficiency = efficiency;
+        CurrentValue = TargetValue = Vector3.Zero;
+    }
+    public void SetCurrent(Vector3 current)
+    {
+        CurrentValue = current;
+    }
+    public void SetTarget(Vector3 target)
+    {
+        TargetValue = target;
+    }
+    public override void Zero()
+    {
+        base.Zero();
+        CurrentValue = TargetValue = Vector3.Zero;
+    }
+
+    // Compute the next step and return the new current value.
+    // Returns the correction needed to move 'current' to 'target'.
+    public virtual Vector3 Step(float timeStep)
+    {
+        if (!Enabled) return TargetValue;
+
+        Vector3 origTarget = TargetValue;       // DEBUG
+        Vector3 origCurrVal = CurrentValue;     // DEBUG
+
+        Vector3 correction = Vector3.Zero;
+        Vector3 error = TargetValue - CurrentValue;
+        if (!ErrorIsZero(error))
+        {
+            correction = StepError(timeStep, error);
+
+            CurrentValue += correction;
+
+            // The desired value reduces to zero which also reduces the difference with current.
+            // If the decay time is infinite, don't decay at all.
+            float decayFactor = 0f;
+            if (TargetValueDecayTimeScale != BSMotor.Infinite)
+            {
+                decayFactor = (1.0f / TargetValueDecayTimeScale) * timeStep;
+                TargetValue *= (1f - decayFactor);
+            }
+
+            MDetailLog("{0},  BSVMotor.Step,nonZero,{1},origCurr={2},origTarget={3},timeStep={4},err={5},corr={6}",
+                                BSScene.DetailLogZero, UseName, origCurrVal, origTarget,
+                                timeStep, error, correction);
+            MDetailLog("{0},  BSVMotor.Step,nonZero,{1},tgtDecayTS={2},decayFact={3},tgt={4},curr={5}",
+                                BSScene.DetailLogZero, UseName, TargetValueDecayTimeScale, decayFactor, TargetValue, CurrentValue);
+        }
+        else
+        {
+            // Difference between what we have and target is small. Motor is done.
+            if (TargetValue.ApproxEquals(Vector3.Zero, ErrorZeroThreshold))
+            {
+                // The target can step down to nearly zero but not get there.  If close to zero
+                //     it is really zero.
+                TargetValue = Vector3.Zero;
+            }
+            CurrentValue = TargetValue;
+            MDetailLog("{0},  BSVMotor.Step,zero,{1},origTgt={2},origCurr={3},currTgt={4},currCurr={5}",
+                        BSScene.DetailLogZero, UseName, origCurrVal, origTarget, TargetValue, CurrentValue);
+        }
+        LastError = error;
+
+        return correction;
+    }
+    // version of step that sets the current value before doing the step
+    public virtual Vector3 Step(float timeStep, Vector3 current)
+    {
+        CurrentValue = current;
+        return Step(timeStep);
+    }
+    // Given and error, computer a correction for this step.
+    // Simple scaling of the error by the timestep.
+    public virtual Vector3 StepError(float timeStep, Vector3 error)
+    {
+        if (!Enabled) return Vector3.Zero;
+
+        Vector3 returnCorrection = Vector3.Zero;
+        if (!ErrorIsZero(error))
+        {
+            // correction =  error / secondsItShouldTakeToCorrect
+            Vector3 correctionAmount;
+            if (TimeScale == 0f || TimeScale == BSMotor.Infinite)
+                correctionAmount = error * timeStep;
+            else
+                correctionAmount = error / TimeScale * timeStep;
+
+            returnCorrection = correctionAmount;
+            MDetailLog("{0},  BSVMotor.Step,nonZero,{1},timeStep={2},timeScale={3},err={4},corr={5}",
+                                    BSScene.DetailLogZero, UseName, timeStep, TimeScale, error, correctionAmount);
+        }
+        return returnCorrection;
+    }
+
+    // The user sets all the parameters and calls this which outputs values until error is zero.
+    public override void GenerateTestOutput(float timeStep)
+    {
+        // maximum number of outputs to generate.
+        int maxOutput = 50;
+        MDetailLog("{0},BSVMotor.Test,{1},===================================== BEGIN Test Output", BSScene.DetailLogZero, UseName);
+        MDetailLog("{0},BSVMotor.Test,{1},timeScale={2},targDlyTS={3},eff={4},curr={5},tgt={6}",
+                                BSScene.DetailLogZero, UseName,
+                                TimeScale, TargetValueDecayTimeScale, Efficiency,
+                                CurrentValue, TargetValue);
+
+        LastError = BSMotor.InfiniteVector;
+        while (maxOutput-- > 0 && !ErrorIsZero())
+        {
+            Vector3 lastStep = Step(timeStep);
+            MDetailLog("{0},BSVMotor.Test,{1},cur={2},tgt={3},lastError={4},lastStep={5}",
+                            BSScene.DetailLogZero, UseName, CurrentValue, TargetValue, LastError, lastStep);
+        }
+        MDetailLog("{0},BSVMotor.Test,{1},===================================== END Test Output", BSScene.DetailLogZero, UseName);
+
+
+    }
+
+    public override string ToString()
+    {
+        return String.Format("<{0},curr={1},targ={2},lastErr={3},decayTS={4}>",
+            UseName, CurrentValue, TargetValue, LastError, TargetValueDecayTimeScale);
+    }
+}
+
+// ============================================================================
+// ============================================================================
+public class BSFMotor : BSMotor
+{
+    public virtual float TimeScale { get; set; }
+    public virtual float TargetValueDecayTimeScale { get; set; }
+    public virtual float Efficiency { get; set; }
+
+    public virtual float ErrorZeroThreshold { get; set; }
+
+    public virtual float TargetValue { get; protected set; }
+    public virtual float CurrentValue { get; protected set; }
+    public virtual float LastError { get; protected set; }
+
+    public virtual bool ErrorIsZero()
+    {
+        return ErrorIsZero(LastError);
+    }
+    public virtual bool ErrorIsZero(float err)
+    {
+        return (err >= -ErrorZeroThreshold && err <= ErrorZeroThreshold);
+    }
+
+    public BSFMotor(string useName, float timeScale, float decayTimescale, float efficiency)
+        : base(useName)
+    {
+        TimeScale = TargetValueDecayTimeScale = BSMotor.Infinite;
+        Efficiency = 1f;
+        CurrentValue = TargetValue = 0f;
+        ErrorZeroThreshold = 0.01f;
+    }
+    public void SetCurrent(float current)
+    {
+        CurrentValue = current;
+    }
+    public void SetTarget(float target)
+    {
+        TargetValue = target;
+    }
+    public override void Zero()
+    {
+        base.Zero();
+        CurrentValue = TargetValue = 0f;
+    }
+
+    public virtual float Step(float timeStep)
+    {
+        if (!Enabled) return TargetValue;
+
+        float origTarget = TargetValue;       // DEBUG
+        float origCurrVal = CurrentValue;     // DEBUG
+
+        float correction = 0f;
+        float error = TargetValue - CurrentValue;
+        if (!ErrorIsZero(error))
+        {
+            correction = StepError(timeStep, error);
+
+            CurrentValue += correction;
+
+            // The desired value reduces to zero which also reduces the difference with current.
+            // If the decay time is infinite, don't decay at all.
+            float decayFactor = 0f;
+            if (TargetValueDecayTimeScale != BSMotor.Infinite)
+            {
+                decayFactor = (1.0f / TargetValueDecayTimeScale) * timeStep;
+                TargetValue *= (1f - decayFactor);
+            }
+
+            MDetailLog("{0},  BSFMotor.Step,nonZero,{1},origCurr={2},origTarget={3},timeStep={4},err={5},corr={6}",
+                                BSScene.DetailLogZero, UseName, origCurrVal, origTarget,
+                                timeStep, error, correction);
+            MDetailLog("{0},  BSFMotor.Step,nonZero,{1},tgtDecayTS={2},decayFact={3},tgt={4},curr={5}",
+                                BSScene.DetailLogZero, UseName, TargetValueDecayTimeScale, decayFactor, TargetValue, CurrentValue);
+        }
+        else
+        {
+            // Difference between what we have and target is small. Motor is done.
+            if (Util.InRange<float>(TargetValue, -ErrorZeroThreshold, ErrorZeroThreshold))
+            {
+                // The target can step down to nearly zero but not get there.  If close to zero
+                //     it is really zero.
+                TargetValue = 0f;
+            }
+            CurrentValue = TargetValue;
+            MDetailLog("{0},  BSFMotor.Step,zero,{1},origTgt={2},origCurr={3},ret={4}",
+                        BSScene.DetailLogZero, UseName, origCurrVal, origTarget, CurrentValue);
+        }
+        LastError = error;
+
+        return CurrentValue;
+    }
+
+    public virtual float StepError(float timeStep, float error)
+    {
+        if (!Enabled) return 0f;
+
+        float returnCorrection = 0f;
+        if (!ErrorIsZero(error))
+        {
+            // correction =  error / secondsItShouldTakeToCorrect
+            float correctionAmount;
+            if (TimeScale == 0f || TimeScale == BSMotor.Infinite)
+                correctionAmount = error * timeStep;
+            else
+                correctionAmount = error / TimeScale * timeStep;
+
+            returnCorrection = correctionAmount;
+            MDetailLog("{0},  BSFMotor.Step,nonZero,{1},timeStep={2},timeScale={3},err={4},corr={5}",
+                                    BSScene.DetailLogZero, UseName, timeStep, TimeScale, error, correctionAmount);
+        }
+        return returnCorrection;
+    }
+
+    public override string ToString()
+    {
+        return String.Format("<{0},curr={1},targ={2},lastErr={3},decayTS={4}>",
+            UseName, CurrentValue, TargetValue, LastError, TargetValueDecayTimeScale);
+    }
+
+}
+
+// ============================================================================
+// ============================================================================
+// Proportional, Integral, Derivitive ("PID") Motor
+// Good description at http://www.answers.com/topic/pid-controller . Includes processes for choosing p, i and d factors.
+public class BSPIDVMotor : BSVMotor
+{
+    // Larger makes more overshoot, smaller means converge quicker. Range of 0.1 to 10.
+    public Vector3 proportionFactor { get; set; }
+    public Vector3 integralFactor { get; set; }
+    public Vector3 derivFactor { get; set; }
+
+    // The factors are vectors for the three dimensions. This is the proportional of each
+    //    that is applied. This could be multiplied through the actual factors but it
+    //    is sometimes easier to manipulate the factors and their mix separately.
+    public Vector3 FactorMix;
+
+    // Arbritrary factor range.
+    // EfficiencyHigh means move quickly to the correct number. EfficiencyLow means might over correct.
+    public float EfficiencyHigh = 0.4f;
+    public float EfficiencyLow = 4.0f;
+
+    // Running integration of the error
+    Vector3 RunningIntegration { get; set; }
+
+    public BSPIDVMotor(string useName)
+        : base(useName)
+    {
+        proportionFactor = new Vector3(1.00f, 1.00f, 1.00f);
+        integralFactor = new Vector3(1.00f, 1.00f, 1.00f);
+        derivFactor = new Vector3(1.00f, 1.00f, 1.00f);
+        FactorMix = new Vector3(0.5f, 0.25f, 0.25f);
+        RunningIntegration = Vector3.Zero;
+        LastError = Vector3.Zero;
+    }
+
+    public override void Zero()
+    {
+        base.Zero();
+    }
+
+    public override float Efficiency
+    {
+        get { return base.Efficiency; }
+        set
+        {
+            base.Efficiency = Util.Clamp(value, 0f, 1f);
+
+            // Compute factors based on efficiency.
+            // If efficiency is high (1f), use a factor value that moves the error value to zero with little overshoot.
+            // If efficiency is low (0f), use a factor value that overcorrects.
+            // TODO: might want to vary contribution of different factor depending on efficiency.
+            // float factor = ((1f - this.Efficiency) * EfficiencyHigh + EfficiencyLow) / 3f;
+            float factor = (1f - this.Efficiency) * EfficiencyHigh + EfficiencyLow;
+
+            proportionFactor = new Vector3(factor, factor, factor);
+            integralFactor = new Vector3(factor, factor, factor);
+            derivFactor = new Vector3(factor, factor, factor);
+
+            MDetailLog("{0},  BSPIDVMotor.setEfficiency,eff={1},factor={2}", BSScene.DetailLogZero, Efficiency, factor);
+        }
+    }
+
+    // Advance the PID computation on this error.
+    public override Vector3 StepError(float timeStep, Vector3 error)
+    {
+        if (!Enabled) return Vector3.Zero;
+
+        // Add up the error so we can integrate over the accumulated errors
+        RunningIntegration += error * timeStep;
+
+        // A simple derivitive is the rate of change from the last error.
+        Vector3 derivitive = (error - LastError) * timeStep;
+
+        // Correction = (proportionOfPresentError + accumulationOfPastError + rateOfChangeOfError)
+        Vector3 ret   =   error / TimeScale * timeStep   * proportionFactor * FactorMix.X
+                        + RunningIntegration / TimeScale * integralFactor   * FactorMix.Y
+                        + derivitive / TimeScale         * derivFactor      * FactorMix.Z
+                        ;
+
+        MDetailLog("{0},  BSPIDVMotor.step,ts={1},err={2},lerr={3},runnInt={4},deriv={5},ret={6}",
+                        BSScene.DetailLogZero, timeStep, error, LastError, RunningIntegration, derivitive, ret);
+
+        return ret;
+    }
+}
+}
diff --git a/OpenSim/Region/PhysicsModules/BulletS/BSParam.cs b/OpenSim/Region/PhysicsModules/BulletS/BSParam.cs
new file mode 100755
index 0000000..c296008
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/BSParam.cs
@@ -0,0 +1,927 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyrightD
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+using System;
+using System.Collections.Generic;
+using System.Reflection;
+using System.Text;
+
+using OpenSim.Region.PhysicsModules.SharedBase;
+
+using OpenMetaverse;
+using Nini.Config;
+
+namespace OpenSim.Region.PhysicsModule.BulletS
+{
+public static class BSParam
+{
+    private static string LogHeader = "[BULLETSIM PARAMETERS]";
+
+    // Tuning notes:
+    // From: http://bulletphysics.org/Bullet/phpBB3/viewtopic.php?t=6575
+    //    Contact points can be added even if the distance is positive. The constraint solver can deal with
+    //    contacts with positive distances as well as negative (penetration). Contact points are discarded
+    //    if the distance exceeds a certain threshold.
+    //    Bullet has a contact processing threshold and a contact breaking threshold.
+    //    If the distance is larger than the contact breaking threshold, it will be removed after one frame.
+    //    If the distance is larger than the contact processing threshold, the constraint solver will ignore it.
+
+    //    This is separate/independent from the collision margin. The collision margin increases the object a bit
+    //    to improve collision detection performance and accuracy.
+    // ===================
+    // From:
+
+    /// <summary>
+    /// Set whether physics is active or not.
+    /// </summary>
+    /// <remarks>
+    /// Can be enabled and disabled to start and stop physics.
+    /// </remarks>
+    public static bool Active { get; private set; }
+
+    public static bool UseSeparatePhysicsThread { get; private set; }
+    public static float PhysicsTimeStep { get; private set; }
+
+    // Level of Detail values kept as float because that's what the Meshmerizer wants
+    public static float MeshLOD { get; private set; }
+    public static float MeshCircularLOD { get; private set; }
+    public static float MeshMegaPrimLOD { get; private set; }
+    public static float MeshMegaPrimThreshold { get; private set; }
+    public static float SculptLOD { get; private set; }
+
+    public static int CrossingFailuresBeforeOutOfBounds { get; private set; }
+    public static float UpdateVelocityChangeThreshold { get; private set; }
+
+    public static float MinimumObjectMass { get; private set; }
+    public static float MaximumObjectMass { get; private set; }
+    public static float MaxLinearVelocity { get; private set; }
+    public static float MaxLinearVelocitySquared { get; private set; }
+    public static float MaxAngularVelocity { get; private set; }
+    public static float MaxAngularVelocitySquared { get; private set; }
+    public static float MaxAddForceMagnitude { get; private set; }
+    public static float MaxAddForceMagnitudeSquared { get; private set; }
+    public static float DensityScaleFactor { get; private set; }
+
+    public static float LinearDamping { get; private set; }
+    public static float AngularDamping { get; private set; }
+    public static float DeactivationTime { get; private set; }
+    public static float LinearSleepingThreshold { get; private set; }
+    public static float AngularSleepingThreshold { get; private set; }
+        public static float CcdMotionThreshold { get; private set; }
+        public static float CcdSweptSphereRadius { get; private set; }
+    public static float ContactProcessingThreshold { get; private set; }
+
+    public static bool ShouldMeshSculptedPrim { get; private set; }   // cause scuplted prims to get meshed
+    public static bool ShouldForceSimplePrimMeshing { get; private set; }   // if a cube or sphere, let Bullet do internal shapes
+    public static bool ShouldUseHullsForPhysicalObjects { get; private set; }   // 'true' if should create hulls for physical objects
+    public static bool ShouldRemoveZeroWidthTriangles { get; private set; }
+    public static bool ShouldUseBulletHACD { get; set; }
+    public static bool ShouldUseSingleConvexHullForPrims { get; set; }
+    public static bool ShouldUseGImpactShapeForPrims { get; set; }
+    public static bool ShouldUseAssetHulls { get; set; }
+
+    public static float TerrainImplementation { get; set; }
+    public static int TerrainMeshMagnification { get; private set; }
+    public static float TerrainGroundPlane { get; private set; }
+    public static float TerrainFriction { get; private set; }
+    public static float TerrainHitFraction { get; private set; }
+    public static float TerrainRestitution { get; private set; }
+    public static float TerrainContactProcessingThreshold { get; private set; }
+    public static float TerrainCollisionMargin { get; private set; }
+
+    public static float DefaultFriction { get; private set; }
+    public static float DefaultDensity { get; private set; }
+    public static float DefaultRestitution { get; private set; }
+    public static float CollisionMargin { get; private set; }
+    public static float Gravity { get; private set; }
+
+    // Physics Engine operation
+        public static float MaxPersistantManifoldPoolSize { get; private set; }
+        public static float MaxCollisionAlgorithmPoolSize { get; private set; }
+        public static bool ShouldDisableContactPoolDynamicAllocation { get; private set; }
+        public static bool ShouldForceUpdateAllAabbs { get; private set; }
+        public static bool ShouldRandomizeSolverOrder { get; private set; }
+        public static bool ShouldSplitSimulationIslands { get; private set; }
+        public static bool ShouldEnableFrictionCaching { get; private set; }
+        public static float NumberOfSolverIterations { get; private set; }
+    public static bool UseSingleSidedMeshes { get; private set; }
+    public static float GlobalContactBreakingThreshold { get; private set; }
+    public static float PhysicsUnmanLoggingFrames { get; private set; }
+
+    // Avatar parameters
+    public static bool AvatarToAvatarCollisionsByDefault { get; private set; }
+    public static float AvatarFriction { get; private set; }
+    public static float AvatarStandingFriction { get; private set; }
+    public static float AvatarAlwaysRunFactor { get; private set; }
+    public static float AvatarDensity { get; private set; }
+    public static float AvatarRestitution { get; private set; }
+    public static int AvatarShape { get; private set; }
+    public static float AvatarCapsuleWidth { get; private set; }
+    public static float AvatarCapsuleDepth { get; private set; }
+    public static float AvatarCapsuleHeight { get; private set; }
+    public static float AvatarHeightLowFudge { get; private set; }
+    public static float AvatarHeightMidFudge { get; private set; }
+    public static float AvatarHeightHighFudge { get; private set; }
+    public static float AvatarFlyingGroundMargin { get; private set; }
+    public static float AvatarFlyingGroundUpForce { get; private set; }
+    public static float AvatarTerminalVelocity { get; private set; }
+        public static float AvatarContactProcessingThreshold { get; private set; }
+    public static float AvatarStopZeroThreshold { get; private set; }
+        public static int AvatarJumpFrames { get; private set; }
+        public static float AvatarBelowGroundUpCorrectionMeters { get; private set; }
+        public static float AvatarStepHeight { get; private set; }
+        public static float AvatarStepAngle { get; private set; }
+        public static float AvatarStepGroundFudge { get; private set; }
+        public static float AvatarStepApproachFactor { get; private set; }
+        public static float AvatarStepForceFactor { get; private set; }
+        public static float AvatarStepUpCorrectionFactor { get; private set; }
+        public static int AvatarStepSmoothingSteps { get; private set; }
+
+    // Vehicle parameters
+    public static float VehicleMaxLinearVelocity { get; private set; }
+    public static float VehicleMaxLinearVelocitySquared { get; private set; }
+    public static float VehicleMinLinearVelocity { get; private set; }
+    public static float VehicleMinLinearVelocitySquared { get; private set; }
+    public static float VehicleMaxAngularVelocity { get; private set; }
+    public static float VehicleMaxAngularVelocitySq { get; private set; }
+    public static float VehicleAngularDamping { get; private set; }
+    public static float VehicleFriction { get; private set; }
+    public static float VehicleRestitution { get; private set; }
+    public static Vector3 VehicleLinearFactor { get; private set; }
+    public static Vector3 VehicleAngularFactor { get; private set; }
+    public static Vector3 VehicleInertiaFactor { get; private set; }
+    public static float VehicleGroundGravityFudge { get; private set; }
+    public static float VehicleAngularBankingTimescaleFudge { get; private set; }
+    public static bool VehicleEnableLinearDeflection { get; private set; }
+    public static bool VehicleLinearDeflectionNotCollidingNoZ { get; private set; }
+    public static bool VehicleEnableAngularVerticalAttraction { get; private set; }
+    public static int VehicleAngularVerticalAttractionAlgorithm { get; private set; }
+    public static bool VehicleEnableAngularDeflection { get; private set; }
+    public static bool VehicleEnableAngularBanking { get; private set; }
+
+    // Convex Hulls
+    // Parameters for convex hull routine that ships with Bullet
+    public static int CSHullMaxDepthSplit { get; private set; }
+    public static int CSHullMaxDepthSplitForSimpleShapes { get; private set; }
+    public static float CSHullConcavityThresholdPercent { get; private set; }
+    public static float CSHullVolumeConservationThresholdPercent { get; private set; }
+    public static int CSHullMaxVertices { get; private set; }
+    public static float CSHullMaxSkinWidth { get; private set; }
+        public static float BHullMaxVerticesPerHull { get; private set; }               // 100
+        public static float BHullMinClusters { get; private set; }                              // 2
+        public static float BHullCompacityWeight { get; private set; }                  // 0.1
+        public static float BHullVolumeWeight { get; private set; }                             // 0.0
+        public static float BHullConcavity { get; private set; }                                    // 100
+        public static bool BHullAddExtraDistPoints { get; private set; }                // false
+        public static bool BHullAddNeighboursDistPoints { get; private set; }   // false
+        public static bool BHullAddFacesPoints { get; private set; }                    // false
+        public static bool BHullShouldAdjustCollisionMargin { get; private set; }       // false
+        public static float WhichHACD { get; private set; }                                 // zero if Bullet HACD, non-zero says VHACD
+    // Parameters for VHACD 2.0: http://code.google.com/p/v-hacd
+    // To enable, set both ShouldUseBulletHACD=true and WhichHACD=1
+        // http://kmamou.blogspot.ca/2014/12/v-hacd-20-parameters-description.html
+        public static float VHACDresolution { get; private set; }                       // 100,000 max number of voxels generated during voxelization stage
+        public static float VHACDdepth { get; private set; }                            // 20 max number of clipping stages
+        public static float VHACDconcavity { get; private set; }                        // 0.0025 maximum concavity
+        public static float VHACDplaneDownsampling { get; private set; }        // 4 granularity of search for best clipping plane
+        public static float VHACDconvexHullDownsampling { get; private set; }   // 4 precision of hull gen process
+        public static float VHACDalpha { get; private set; }                            // 0.05 bias toward clipping along symmetry planes
+        public static float VHACDbeta { get; private set; }                                 // 0.05 bias toward clipping along revolution axis
+        public static float VHACDgamma { get; private set; }                            // 0.00125 max concavity when merging
+        public static float VHACDpca { get; private set; }                                      // 0 on/off normalizing mesh before decomp
+        public static float VHACDmode { get; private set; }                                 // 0 0:voxel based, 1: tetrahedron based
+        public static float VHACDmaxNumVerticesPerCH { get; private set; }      // 64 max triangles per convex hull
+        public static float VHACDminVolumePerCH { get; private set; }           // 0.0001 sampling of generated convex hulls
+
+    // Linkset implementation parameters
+    public static float LinksetImplementation { get; private set; }
+    public static bool LinksetOffsetCenterOfMass { get; private set; }
+    public static bool LinkConstraintUseFrameOffset { get; private set; }
+    public static bool LinkConstraintEnableTransMotor { get; private set; }
+    public static float LinkConstraintTransMotorMaxVel { get; private set; }
+    public static float LinkConstraintTransMotorMaxForce { get; private set; }
+    public static float LinkConstraintERP { get; private set; }
+    public static float LinkConstraintCFM { get; private set; }
+    public static float LinkConstraintSolverIterations { get; private set; }
+
+    public static float PID_D { get; private set; }    // derivative
+    public static float PID_P { get; private set; }    // proportional
+
+    // Various constants that come from that other virtual world that shall not be named.
+    public const float MinGravityZ = -1f;
+    public const float MaxGravityZ = 28f;
+    public const float MinFriction = 0f;
+    public const float MaxFriction = 255f;
+    public const float MinDensity = 0.01f;
+    public const float MaxDensity = 22587f;
+    public const float MinRestitution = 0f;
+    public const float MaxRestitution = 1f;
+
+    // =====================================================================================
+    // =====================================================================================
+
+    // Base parameter definition that gets and sets parameter values via a string
+    public abstract class ParameterDefnBase
+    {
+        public string name;         // string name of the parameter
+        public string desc;         // a short description of what the parameter means
+        public ParameterDefnBase(string pName, string pDesc)
+        {
+            name = pName;
+            desc = pDesc;
+        }
+        // Set the parameter value to the default
+        public abstract void AssignDefault(BSScene s);
+        // Get the value as a string
+        public abstract string GetValue(BSScene s);
+        // Set the value to this string value
+        public abstract void SetValue(BSScene s, string valAsString);
+        // set the value on a particular object (usually sets in physics engine)
+        public abstract void SetOnObject(BSScene s, BSPhysObject obj);
+        public abstract bool HasSetOnObject { get; }
+    }
+
+    // Specific parameter definition for a parameter of a specific type.
+    public delegate T PGetValue<T>(BSScene s);
+    public delegate void PSetValue<T>(BSScene s, T val);
+    public delegate void PSetOnObject<T>(BSScene scene, BSPhysObject obj);
+    public sealed class ParameterDefn<T> : ParameterDefnBase
+    {
+        private T defaultValue;
+        private PSetValue<T> setter;
+        private PGetValue<T> getter;
+        private PSetOnObject<T> objectSet;
+        public ParameterDefn(string pName, string pDesc, T pDefault, PGetValue<T> pGetter, PSetValue<T> pSetter)
+            : base(pName, pDesc)
+        {
+            defaultValue = pDefault;
+            setter = pSetter;
+            getter = pGetter;
+            objectSet = null;
+        }
+        public ParameterDefn(string pName, string pDesc, T pDefault, PGetValue<T> pGetter, PSetValue<T> pSetter, PSetOnObject<T> pObjSetter)
+            : base(pName, pDesc)
+        {
+            defaultValue = pDefault;
+            setter = pSetter;
+            getter = pGetter;
+            objectSet = pObjSetter;
+        }
+        // Simple parameter variable where property name is the same as the INI file name
+        //     and the value is only a simple get and set.
+        public ParameterDefn(string pName, string pDesc, T pDefault)
+            : base(pName, pDesc)
+        {
+            defaultValue = pDefault;
+            setter = (s, v) => { SetValueByName(s, name, v); };
+            getter = (s) => { return GetValueByName(s, name); };
+            objectSet = null;
+        }
+        // Use reflection to find the property named 'pName' in BSParam and assign 'val' to same.
+        private void SetValueByName(BSScene s, string pName, T val)
+        {
+            PropertyInfo prop = typeof(BSParam).GetProperty(pName, BindingFlags.Public | BindingFlags.Static | BindingFlags.FlattenHierarchy);
+            if (prop == null)
+            {
+                // This should only be output when someone adds a new INI parameter and misspells the name.
+                s.Logger.ErrorFormat("{0} SetValueByName: did not find '{1}'. Verify specified property name is the same as the given INI parameters name.", LogHeader, pName);
+            }
+            else
+            {
+                prop.SetValue(null, val, null);
+            }
+        }
+        // Use reflection to find the property named 'pName' in BSParam and return the value in same.
+        private T GetValueByName(BSScene s, string pName)
+        {
+            PropertyInfo prop = typeof(BSParam).GetProperty(pName, BindingFlags.Public | BindingFlags.Static | BindingFlags.FlattenHierarchy);
+            if (prop == null)
+            {
+                // This should only be output when someone adds a new INI parameter and misspells the name.
+                s.Logger.ErrorFormat("{0} GetValueByName: did not find '{1}'. Verify specified property name is the same as the given INI parameter name.", LogHeader, pName);
+            }
+            return (T)prop.GetValue(null, null);
+        }
+        public override void AssignDefault(BSScene s)
+        {
+            setter(s, defaultValue);
+        }
+        public override string GetValue(BSScene s)
+        {
+            return getter(s).ToString();
+        }
+        public override void SetValue(BSScene s, string valAsString)
+        {
+            // Get the generic type of the setter
+            Type genericType = setter.GetType().GetGenericArguments()[0];
+            // Find the 'Parse' method on that type
+            System.Reflection.MethodInfo parser = null;
+            try
+            {
+                parser = genericType.GetMethod("Parse", new Type[] { typeof(String) } );
+            }
+            catch (Exception e)
+            {
+                s.Logger.ErrorFormat("{0} Exception getting parser for type '{1}': {2}", LogHeader, genericType, e);
+                parser = null;
+            }
+            if (parser != null)
+            {
+                // Parse the input string
+                try
+                {
+                    T setValue = (T)parser.Invoke(genericType, new Object[] { valAsString });
+                    // Store the parsed value
+                    setter(s, setValue);
+                    // s.Logger.DebugFormat("{0} Parameter {1} = {2}", LogHeader, name, setValue);
+                }
+                catch
+                {
+                    s.Logger.ErrorFormat("{0} Failed parsing parameter value '{1}' as type '{2}'", LogHeader, valAsString, genericType);
+                }
+            }
+            else
+            {
+                s.Logger.ErrorFormat("{0} Could not find parameter parser for type '{1}'", LogHeader, genericType);
+            }
+        }
+        public override bool HasSetOnObject
+        {
+            get { return objectSet != null; }
+        }
+        public override void SetOnObject(BSScene s, BSPhysObject obj)
+        {
+            if (objectSet != null)
+                objectSet(s, obj);
+        }
+    }
+
+    // List of all of the externally visible parameters.
+    // For each parameter, this table maps a text name to getter and setters.
+    // To add a new externally referencable/settable parameter, add the paramter storage
+    //    location somewhere in the program and make an entry in this table with the
+    //    getters and setters.
+    // It is easiest to find an existing definition and copy it.
+    //
+    // A ParameterDefn<T>() takes the following parameters:
+    //    -- the text name of the parameter. This is used for console input and ini file.
+    //    -- a short text description of the parameter. This shows up in the console listing.
+    //    -- a default value
+    //    -- a delegate for getting the value
+    //    -- a delegate for setting the value
+    //    -- an optional delegate to update the value in the world. Most often used to
+    //          push the new value to an in-world object.
+    //
+    // The single letter parameters for the delegates are:
+    //    s = BSScene
+    //    o = BSPhysObject
+    //    v = value (appropriate type)
+    private static ParameterDefnBase[] ParameterDefinitions =
+    {
+        new ParameterDefn<bool>("Active", "If 'true', false then physics is not active",
+            false ),
+        new ParameterDefn<bool>("UseSeparatePhysicsThread", "If 'true', the physics engine runs independent from the simulator heartbeat",
+            false ),
+        new ParameterDefn<float>("PhysicsTimeStep", "If separate thread, seconds to simulate each interval",
+            0.089f ),
+
+        new ParameterDefn<bool>("MeshSculptedPrim", "Whether to create meshes for sculpties",
+            true,
+            (s) => { return ShouldMeshSculptedPrim; },
+            (s,v) => { ShouldMeshSculptedPrim = v; } ),
+        new ParameterDefn<bool>("ForceSimplePrimMeshing", "If true, only use primitive meshes for objects",
+            false,
+            (s) => { return ShouldForceSimplePrimMeshing; },
+            (s,v) => { ShouldForceSimplePrimMeshing = v; } ),
+        new ParameterDefn<bool>("UseHullsForPhysicalObjects", "If true, create hulls for physical objects",
+            true,
+            (s) => { return ShouldUseHullsForPhysicalObjects; },
+            (s,v) => { ShouldUseHullsForPhysicalObjects = v; } ),
+        new ParameterDefn<bool>("ShouldRemoveZeroWidthTriangles", "If true, remove degenerate triangles from meshes",
+            true ),
+        new ParameterDefn<bool>("ShouldUseBulletHACD", "If true, use the Bullet version of HACD",
+            false ),
+        new ParameterDefn<bool>("ShouldUseSingleConvexHullForPrims", "If true, use a single convex hull shape for physical prims",
+            true ),
+        new ParameterDefn<bool>("ShouldUseGImpactShapeForPrims", "If true, use a GImpact shape for prims with cuts and twists",
+            false ),
+        new ParameterDefn<bool>("ShouldUseAssetHulls", "If true, use hull if specified in the mesh asset info",
+            true ),
+
+        new ParameterDefn<int>("CrossingFailuresBeforeOutOfBounds", "How forgiving we are about getting into adjactent regions",
+            5 ),
+        new ParameterDefn<float>("UpdateVelocityChangeThreshold", "Change in updated velocity required before reporting change to simulator",
+            0.1f ),
+
+        new ParameterDefn<float>("MeshLevelOfDetail", "Level of detail to render meshes (32, 16, 8 or 4. 32=most detailed)",
+            32f,
+            (s) => { return MeshLOD; },
+            (s,v) => { MeshLOD = v; } ),
+        new ParameterDefn<float>("MeshLevelOfDetailCircular", "Level of detail for prims with circular cuts or shapes",
+            32f,
+            (s) => { return MeshCircularLOD; },
+            (s,v) => { MeshCircularLOD = v; } ),
+        new ParameterDefn<float>("MeshLevelOfDetailMegaPrimThreshold", "Size (in meters) of a mesh before using MeshMegaPrimLOD",
+            10f,
+            (s) => { return MeshMegaPrimThreshold; },
+            (s,v) => { MeshMegaPrimThreshold = v; } ),
+        new ParameterDefn<float>("MeshLevelOfDetailMegaPrim", "Level of detail to render meshes larger than threshold meters",
+            32f,
+            (s) => { return MeshMegaPrimLOD; },
+            (s,v) => { MeshMegaPrimLOD = v; } ),
+        new ParameterDefn<float>("SculptLevelOfDetail", "Level of detail to render sculpties (32, 16, 8 or 4. 32=most detailed)",
+            32f,
+            (s) => { return SculptLOD; },
+            (s,v) => { SculptLOD = v; } ),
+
+        new ParameterDefn<int>("MaxSubStep", "In simulation step, maximum number of substeps",
+            10,
+            (s) => { return s.m_maxSubSteps; },
+            (s,v) => { s.m_maxSubSteps = (int)v; } ),
+        new ParameterDefn<float>("FixedTimeStep", "In simulation step, seconds of one substep (1/60)",
+            1f / 60f,
+            (s) => { return s.m_fixedTimeStep; },
+            (s,v) => { s.m_fixedTimeStep = v; } ),
+        new ParameterDefn<float>("NominalFrameRate", "The base frame rate we claim",
+            55f,
+            (s) => { return s.NominalFrameRate; },
+            (s,v) => { s.NominalFrameRate = (int)v; } ),
+        new ParameterDefn<int>("MaxCollisionsPerFrame", "Max collisions returned at end of each frame",
+            2048,
+            (s) => { return s.m_maxCollisionsPerFrame; },
+            (s,v) => { s.m_maxCollisionsPerFrame = (int)v; } ),
+        new ParameterDefn<int>("MaxUpdatesPerFrame", "Max updates returned at end of each frame",
+            8000,
+            (s) => { return s.m_maxUpdatesPerFrame; },
+            (s,v) => { s.m_maxUpdatesPerFrame = (int)v; } ),
+
+        new ParameterDefn<float>("MinObjectMass", "Minimum object mass (0.0001)",
+            0.0001f,
+            (s) => { return MinimumObjectMass; },
+            (s,v) => { MinimumObjectMass = v; } ),
+        new ParameterDefn<float>("MaxObjectMass", "Maximum object mass (10000.01)",
+            10000.01f,
+            (s) => { return MaximumObjectMass; },
+            (s,v) => { MaximumObjectMass = v; } ),
+        new ParameterDefn<float>("MaxLinearVelocity", "Maximum velocity magnitude that can be assigned to an object",
+            1000.0f,
+            (s) => { return MaxLinearVelocity; },
+            (s,v) => { MaxLinearVelocity = v; MaxLinearVelocitySquared = v * v; } ),
+        new ParameterDefn<float>("MaxAngularVelocity", "Maximum rotational velocity magnitude that can be assigned to an object",
+            1000.0f,
+            (s) => { return MaxAngularVelocity; },
+            (s,v) => { MaxAngularVelocity = v;  MaxAngularVelocitySquared = v * v; } ),
+        // LL documentation says thie number should be 20f for llApplyImpulse and 200f for llRezObject
+        new ParameterDefn<float>("MaxAddForceMagnitude", "Maximum force that can be applied by llApplyImpulse (SL says 20f)",
+            20000.0f,
+            (s) => { return MaxAddForceMagnitude; },
+            (s,v) => { MaxAddForceMagnitude = v; MaxAddForceMagnitudeSquared = v * v; } ),
+        // Density is passed around as 100kg/m3. This scales that to 1kg/m3.
+        // Reduce by power of 100 because Bullet doesn't seem to handle objects with large mass very well
+        new ParameterDefn<float>("DensityScaleFactor", "Conversion for simulator/viewer density (100kg/m3) to physical density (1kg/m3)",
+            0.01f ),
+
+        new ParameterDefn<float>("PID_D", "Derivitive factor for motion smoothing",
+            2200f ),
+        new ParameterDefn<float>("PID_P", "Parameteric factor for motion smoothing",
+            900f ),
+
+        new ParameterDefn<float>("DefaultFriction", "Friction factor used on new objects",
+            0.2f,
+            (s) => { return DefaultFriction; },
+            (s,v) => { DefaultFriction = v; s.UnmanagedParams[0].defaultFriction = v; } ),
+        // For historical reasons, the viewer and simulator multiply the density by 100
+        new ParameterDefn<float>("DefaultDensity", "Density for new objects" ,
+            1000.0006836f,  // Aluminum g/cm3 * 100
+            (s) => { return DefaultDensity; },
+            (s,v) => { DefaultDensity = v; s.UnmanagedParams[0].defaultDensity = v; } ),
+        new ParameterDefn<float>("DefaultRestitution", "Bouncyness of an object" ,
+            0f,
+            (s) => { return DefaultRestitution; },
+            (s,v) => { DefaultRestitution = v; s.UnmanagedParams[0].defaultRestitution = v; } ),
+        new ParameterDefn<float>("CollisionMargin", "Margin around objects before collisions are calculated (must be zero!)",
+            0.04f,
+            (s) => { return CollisionMargin; },
+            (s,v) => { CollisionMargin = v; s.UnmanagedParams[0].collisionMargin = v; } ),
+        new ParameterDefn<float>("Gravity", "Vertical force of gravity (negative means down)",
+            -9.80665f,
+            (s) => { return Gravity; },
+            (s,v) => { Gravity = v; s.UnmanagedParams[0].gravity = v; },
+            (s,o) => { s.PE.SetGravity(o.PhysBody, new Vector3(0f,0f,Gravity)); } ),
+
+
+        new ParameterDefn<float>("LinearDamping", "Factor to damp linear movement per second (0.0 - 1.0)",
+            0f,
+            (s) => { return LinearDamping; },
+            (s,v) => { LinearDamping = v; },
+            (s,o) => { s.PE.SetDamping(o.PhysBody, LinearDamping, AngularDamping); } ),
+        new ParameterDefn<float>("AngularDamping", "Factor to damp angular movement per second (0.0 - 1.0)",
+            0f,
+            (s) => { return AngularDamping; },
+            (s,v) => { AngularDamping = v; },
+            (s,o) => { s.PE.SetDamping(o.PhysBody, LinearDamping, AngularDamping); } ),
+        new ParameterDefn<float>("DeactivationTime", "Seconds before considering an object potentially static",
+            0.2f,
+            (s) => { return DeactivationTime; },
+            (s,v) => { DeactivationTime = v; },
+            (s,o) => { s.PE.SetDeactivationTime(o.PhysBody, DeactivationTime); } ),
+        new ParameterDefn<float>("LinearSleepingThreshold", "Seconds to measure linear movement before considering static",
+            0.8f,
+            (s) => { return LinearSleepingThreshold; },
+            (s,v) => { LinearSleepingThreshold = v;},
+            (s,o) => { s.PE.SetSleepingThresholds(o.PhysBody, LinearSleepingThreshold, AngularSleepingThreshold); } ),
+        new ParameterDefn<float>("AngularSleepingThreshold", "Seconds to measure angular movement before considering static",
+            1.0f,
+            (s) => { return AngularSleepingThreshold; },
+            (s,v) => { AngularSleepingThreshold = v;},
+            (s,o) => { s.PE.SetSleepingThresholds(o.PhysBody, LinearSleepingThreshold, AngularSleepingThreshold); } ),
+        new ParameterDefn<float>("CcdMotionThreshold", "Continuious collision detection threshold (0 means no CCD)" ,
+            0.0f,     // set to zero to disable
+            (s) => { return CcdMotionThreshold; },
+            (s,v) => { CcdMotionThreshold = v;},
+            (s,o) => { s.PE.SetCcdMotionThreshold(o.PhysBody, CcdMotionThreshold); } ),
+        new ParameterDefn<float>("CcdSweptSphereRadius", "Continuious collision detection test radius" ,
+            0.2f,
+            (s) => { return CcdSweptSphereRadius; },
+            (s,v) => { CcdSweptSphereRadius = v;},
+            (s,o) => { s.PE.SetCcdSweptSphereRadius(o.PhysBody, CcdSweptSphereRadius); } ),
+        new ParameterDefn<float>("ContactProcessingThreshold", "Distance above which contacts can be discarded (0 means no discard)" ,
+            0.0f,
+            (s) => { return ContactProcessingThreshold; },
+            (s,v) => { ContactProcessingThreshold = v;},
+            (s,o) => { s.PE.SetContactProcessingThreshold(o.PhysBody, ContactProcessingThreshold); } ),
+
+            new ParameterDefn<float>("TerrainImplementation", "Type of shape to use for terrain (0=heightmap, 1=mesh)",
+            (float)BSTerrainPhys.TerrainImplementation.Heightmap ),
+        new ParameterDefn<int>("TerrainMeshMagnification", "Number of times the 256x256 heightmap is multiplied to create the terrain mesh" ,
+            2 ),
+        new ParameterDefn<float>("TerrainGroundPlane", "Altitude of ground plane used to keep things from falling to infinity" ,
+            -500.0f ),
+        new ParameterDefn<float>("TerrainFriction", "Factor to reduce movement against terrain surface" ,
+            0.3f ),
+        new ParameterDefn<float>("TerrainHitFraction", "Distance to measure hit collisions" ,
+            0.8f ),
+        new ParameterDefn<float>("TerrainRestitution", "Bouncyness" ,
+            0f ),
+        new ParameterDefn<float>("TerrainContactProcessingThreshold", "Distance from terrain to stop processing collisions" ,
+            0.0f ),
+        new ParameterDefn<float>("TerrainCollisionMargin", "Margin where collision checking starts" ,
+            0.04f ),
+
+        new ParameterDefn<bool>("AvatarToAvatarCollisionsByDefault", "Should avatars collide with other avatars by default?",
+            true),
+        new ParameterDefn<float>("AvatarFriction", "Factor to reduce movement against an avatar. Changed on avatar recreation.",
+            0.2f ),
+        new ParameterDefn<float>("AvatarStandingFriction", "Avatar friction when standing. Changed on avatar recreation.",
+            0.95f ),
+        new ParameterDefn<float>("AvatarAlwaysRunFactor", "Speed multiplier if avatar is set to always run",
+            1.3f ),
+            // For historical reasons, density is reported  * 100
+        new ParameterDefn<float>("AvatarDensity", "Density of an avatar. Changed on avatar recreation. Scaled times 100.",
+            3500f) ,    // 3.5 * 100
+        new ParameterDefn<float>("AvatarRestitution", "Bouncyness. Changed on avatar recreation.",
+            0f ),
+        new ParameterDefn<int>("AvatarShape", "Code for avatar physical shape: 0:capsule, 1:cube, 2:ovoid, 2:mesh",
+            BSShapeCollection.AvatarShapeCube ) ,
+        new ParameterDefn<float>("AvatarCapsuleWidth", "The distance between the sides of the avatar capsule",
+            0.6f ) ,
+        new ParameterDefn<float>("AvatarCapsuleDepth", "The distance between the front and back of the avatar capsule",
+            0.45f ),
+        new ParameterDefn<float>("AvatarCapsuleHeight", "Default height of space around avatar",
+            1.5f ),
+        new ParameterDefn<float>("AvatarHeightLowFudge", "A fudge factor to make small avatars stand on the ground",
+            0f ),
+        new ParameterDefn<float>("AvatarHeightMidFudge", "A fudge distance to adjust average sized avatars to be standing on ground",
+            0f ),
+        new ParameterDefn<float>("AvatarHeightHighFudge", "A fudge factor to make tall avatars stand on the ground",
+            0f ),
+        new ParameterDefn<float>("AvatarFlyingGroundMargin", "Meters avatar is kept above the ground when flying",
+            5f ),
+        new ParameterDefn<float>("AvatarFlyingGroundUpForce", "Upward force applied to the avatar to keep it at flying ground margin",
+            2.0f ),
+        new ParameterDefn<float>("AvatarTerminalVelocity", "Terminal Velocity of falling avatar",
+            -54.0f ),
+            new ParameterDefn<float>("AvatarContactProcessingThreshold", "Distance from capsule to check for collisions",
+            0.1f ),
+            new ParameterDefn<float>("AvatarStopZeroThreshold", "Movement velocity below which avatar is assumed to be stopped",
+            0.1f ),
+            new ParameterDefn<float>("AvatarBelowGroundUpCorrectionMeters", "Meters to move avatar up if it seems to be below ground",
+            1.0f ),
+            new ParameterDefn<int>("AvatarJumpFrames", "Number of frames to allow jump forces. Changes jump height.",
+            4 ),
+            new ParameterDefn<float>("AvatarStepHeight", "Height of a step obstacle to consider step correction",
+            0.999f ) ,
+            new ParameterDefn<float>("AvatarStepAngle", "The angle (in radians) for a vertical surface to be considered a step",
+            0.3f ) ,
+            new ParameterDefn<float>("AvatarStepGroundFudge", "Fudge factor subtracted from avatar base when comparing collision height",
+            0.1f ) ,
+            new ParameterDefn<float>("AvatarStepApproachFactor", "Factor to control angle of approach to step (0=straight on)",
+            2f ),
+            new ParameterDefn<float>("AvatarStepForceFactor", "Controls the amount of force up applied to step up onto a step",
+            0f ),
+            new ParameterDefn<float>("AvatarStepUpCorrectionFactor", "Multiplied by height of step collision to create up movement at step",
+            0.8f ),
+            new ParameterDefn<int>("AvatarStepSmoothingSteps", "Number of frames after a step collision that we continue walking up stairs",
+            1 ),
+
+        new ParameterDefn<float>("VehicleMaxLinearVelocity", "Maximum velocity magnitude that can be assigned to a vehicle",
+            1000.0f,
+            (s) => { return (float)VehicleMaxLinearVelocity; },
+            (s,v) => { VehicleMaxLinearVelocity = v; VehicleMaxLinearVelocitySquared = v * v; } ),
+        new ParameterDefn<float>("VehicleMinLinearVelocity", "Maximum velocity magnitude that can be assigned to a vehicle",
+            0.001f,
+            (s) => { return (float)VehicleMinLinearVelocity; },
+            (s,v) => { VehicleMinLinearVelocity = v; VehicleMinLinearVelocitySquared = v * v; } ),
+        new ParameterDefn<float>("VehicleMaxAngularVelocity", "Maximum rotational velocity magnitude that can be assigned to a vehicle",
+            12.0f,
+            (s) => { return (float)VehicleMaxAngularVelocity; },
+            (s,v) => { VehicleMaxAngularVelocity = v; VehicleMaxAngularVelocitySq = v * v; } ),
+        new ParameterDefn<float>("VehicleAngularDamping", "Factor to damp vehicle angular movement per second (0.0 - 1.0)",
+            0.0f ),
+        new ParameterDefn<Vector3>("VehicleLinearFactor", "Fraction of physical linear changes applied to vehicle (<0,0,0> to <1,1,1>)",
+            new Vector3(1f, 1f, 1f) ),
+        new ParameterDefn<Vector3>("VehicleAngularFactor", "Fraction of physical angular changes applied to vehicle (<0,0,0> to <1,1,1>)",
+            new Vector3(1f, 1f, 1f) ),
+        new ParameterDefn<Vector3>("VehicleInertiaFactor", "Fraction of physical inertia applied (<0,0,0> to <1,1,1>)",
+            new Vector3(1f, 1f, 1f) ),
+        new ParameterDefn<float>("VehicleFriction", "Friction of vehicle on the ground (0.0 - 1.0)",
+            0.0f ),
+        new ParameterDefn<float>("VehicleRestitution", "Bouncyness factor for vehicles (0.0 - 1.0)",
+            0.0f ),
+        new ParameterDefn<float>("VehicleGroundGravityFudge", "Factor to multiply gravity if a ground vehicle is probably on the ground (0.0 - 1.0)",
+            0.2f ),
+        new ParameterDefn<float>("VehicleAngularBankingTimescaleFudge", "Factor to multiple angular banking timescale. Tune to increase realism.",
+            60.0f ),
+        new ParameterDefn<bool>("VehicleEnableLinearDeflection", "Turn on/off vehicle linear deflection effect",
+            true ),
+        new ParameterDefn<bool>("VehicleLinearDeflectionNotCollidingNoZ", "Turn on/off linear deflection Z effect on non-colliding vehicles",
+            true ),
+        new ParameterDefn<bool>("VehicleEnableAngularVerticalAttraction", "Turn on/off vehicle angular vertical attraction effect",
+            true ),
+        new ParameterDefn<int>("VehicleAngularVerticalAttractionAlgorithm", "Select vertical attraction algo. You need to look at the source.",
+            0 ),
+        new ParameterDefn<bool>("VehicleEnableAngularDeflection", "Turn on/off vehicle angular deflection effect",
+            true ),
+        new ParameterDefn<bool>("VehicleEnableAngularBanking", "Turn on/off vehicle angular banking effect",
+            true ),
+
+            new ParameterDefn<float>("MaxPersistantManifoldPoolSize", "Number of manifolds pooled (0 means default of 4096)",
+            0f,
+            (s) => { return MaxPersistantManifoldPoolSize; },
+            (s,v) => { MaxPersistantManifoldPoolSize = v; s.UnmanagedParams[0].maxPersistantManifoldPoolSize = v; } ),
+            new ParameterDefn<float>("MaxCollisionAlgorithmPoolSize", "Number of collisions pooled (0 means default of 4096)",
+            0f,
+            (s) => { return MaxCollisionAlgorithmPoolSize; },
+            (s,v) => { MaxCollisionAlgorithmPoolSize = v; s.UnmanagedParams[0].maxCollisionAlgorithmPoolSize = v; } ),
+            new ParameterDefn<bool>("ShouldDisableContactPoolDynamicAllocation", "Enable to allow large changes in object count",
+            false,
+            (s) => { return ShouldDisableContactPoolDynamicAllocation; },
+            (s,v) => { ShouldDisableContactPoolDynamicAllocation = v;
+                        s.UnmanagedParams[0].shouldDisableContactPoolDynamicAllocation = NumericBool(v); } ),
+            new ParameterDefn<bool>("ShouldForceUpdateAllAabbs", "Enable to recomputer AABBs every simulator step",
+            false,
+            (s) => { return ShouldForceUpdateAllAabbs; },
+            (s,v) => { ShouldForceUpdateAllAabbs = v; s.UnmanagedParams[0].shouldForceUpdateAllAabbs = NumericBool(v); } ),
+            new ParameterDefn<bool>("ShouldRandomizeSolverOrder", "Enable for slightly better stacking interaction",
+            true,
+            (s) => { return ShouldRandomizeSolverOrder; },
+            (s,v) => { ShouldRandomizeSolverOrder = v; s.UnmanagedParams[0].shouldRandomizeSolverOrder = NumericBool(v); } ),
+            new ParameterDefn<bool>("ShouldSplitSimulationIslands", "Enable splitting active object scanning islands",
+            true,
+            (s) => { return ShouldSplitSimulationIslands; },
+            (s,v) => { ShouldSplitSimulationIslands = v; s.UnmanagedParams[0].shouldSplitSimulationIslands = NumericBool(v); } ),
+            new ParameterDefn<bool>("ShouldEnableFrictionCaching", "Enable friction computation caching",
+            true,
+            (s) => { return ShouldEnableFrictionCaching; },
+            (s,v) => { ShouldEnableFrictionCaching = v; s.UnmanagedParams[0].shouldEnableFrictionCaching = NumericBool(v); } ),
+            new ParameterDefn<float>("NumberOfSolverIterations", "Number of internal iterations (0 means default)",
+            0f,     // zero says use Bullet default
+            (s) => { return NumberOfSolverIterations; },
+            (s,v) => { NumberOfSolverIterations = v; s.UnmanagedParams[0].numberOfSolverIterations = v; } ),
+            new ParameterDefn<bool>("UseSingleSidedMeshes", "Whether to compute collisions based on single sided meshes.",
+            true,
+            (s) => { return UseSingleSidedMeshes; },
+            (s,v) => { UseSingleSidedMeshes = v; s.UnmanagedParams[0].useSingleSidedMeshes = NumericBool(v); } ),
+            new ParameterDefn<float>("GlobalContactBreakingThreshold", "Amount of shape radius before breaking a collision contact (0 says Bullet default (0.2))",
+            0f,
+            (s) => { return GlobalContactBreakingThreshold; },
+            (s,v) => { GlobalContactBreakingThreshold = v; s.UnmanagedParams[0].globalContactBreakingThreshold = v; } ),
+            new ParameterDefn<float>("PhysicsUnmanLoggingFrames", "If non-zero, frames between output of detailed unmanaged physics statistics",
+            0f,
+            (s) => { return PhysicsUnmanLoggingFrames; },
+            (s,v) => { PhysicsUnmanLoggingFrames = v; s.UnmanagedParams[0].physicsLoggingFrames = v; } ),
+
+            new ParameterDefn<int>("CSHullMaxDepthSplit", "CS impl: max depth to split for hull. 1-10 but > 7 is iffy",
+            7 ),
+            new ParameterDefn<int>("CSHullMaxDepthSplitForSimpleShapes", "CS impl: max depth setting for simple prim shapes",
+            2 ),
+            new ParameterDefn<float>("CSHullConcavityThresholdPercent", "CS impl: concavity threshold percent (0-20)",
+            5f ),
+            new ParameterDefn<float>("CSHullVolumeConservationThresholdPercent", "percent volume conservation to collapse hulls (0-30)",
+            5f ),
+            new ParameterDefn<int>("CSHullMaxVertices", "CS impl: maximum number of vertices in output hulls. Keep < 50.",
+            32 ),
+            new ParameterDefn<float>("CSHullMaxSkinWidth", "CS impl: skin width to apply to output hulls.",
+            0f ),
+
+            new ParameterDefn<float>("BHullMaxVerticesPerHull", "Bullet impl: max number of vertices per created hull",
+            200f ),
+            new ParameterDefn<float>("BHullMinClusters", "Bullet impl: minimum number of hulls to create per mesh",
+            10f ),
+            new ParameterDefn<float>("BHullCompacityWeight", "Bullet impl: weight factor for how compact to make hulls",
+            20f ),
+            new ParameterDefn<float>("BHullVolumeWeight", "Bullet impl: weight factor for volume in created hull",
+            0.1f ),
+            new ParameterDefn<float>("BHullConcavity", "Bullet impl: weight factor for how convex a created hull can be",
+            10f ),
+            new ParameterDefn<bool>("BHullAddExtraDistPoints", "Bullet impl: whether to add extra vertices for long distance vectors",
+            true ),
+            new ParameterDefn<bool>("BHullAddNeighboursDistPoints", "Bullet impl: whether to add extra vertices between neighbor hulls",
+            true ),
+            new ParameterDefn<bool>("BHullAddFacesPoints", "Bullet impl: whether to add extra vertices to break up hull faces",
+            true ),
+            new ParameterDefn<bool>("BHullShouldAdjustCollisionMargin", "Bullet impl: whether to shrink resulting hulls to account for collision margin",
+            false ),
+
+            new ParameterDefn<float>("WhichHACD", "zero if Bullet HACD, non-zero says VHACD",
+            0f ),
+            new ParameterDefn<float>("VHACDresolution", "max number of voxels generated during voxelization stage",
+            100000f ),
+            new ParameterDefn<float>("VHACDdepth", "max number of clipping stages",
+            20f ),
+            new ParameterDefn<float>("VHACDconcavity", "maximum concavity",
+            0.0025f ),
+            new ParameterDefn<float>("VHACDplaneDownsampling", "granularity of search for best clipping plane",
+            4f ),
+            new ParameterDefn<float>("VHACDconvexHullDownsampling", "precision of hull gen process",
+            4f ),
+            new ParameterDefn<float>("VHACDalpha", "bias toward clipping along symmetry planes",
+            0.05f ),
+            new ParameterDefn<float>("VHACDbeta", "bias toward clipping along revolution axis",
+            0.05f ),
+            new ParameterDefn<float>("VHACDgamma", "max concavity when merging",
+            0.00125f ),
+            new ParameterDefn<float>("VHACDpca", "on/off normalizing mesh before decomp",
+            0f ),
+            new ParameterDefn<float>("VHACDmode", "0:voxel based, 1: tetrahedron based",
+            0f ),
+            new ParameterDefn<float>("VHACDmaxNumVerticesPerCH", "max triangles per convex hull",
+            64f ),
+            new ParameterDefn<float>("VHACDminVolumePerCH",     "sampling of generated convex hulls",
+            0.0001f ),
+
+            new ParameterDefn<float>("LinksetImplementation", "Type of linkset implementation (0=Constraint, 1=Compound, 2=Manual)",
+            (float)BSLinkset.LinksetImplementation.Compound ),
+            new ParameterDefn<bool>("LinksetOffsetCenterOfMass", "If 'true', compute linkset center-of-mass and offset linkset position to account for same",
+            true ),
+            new ParameterDefn<bool>("LinkConstraintUseFrameOffset", "For linksets built with constraints, enable frame offsetFor linksets built with constraints, enable frame offset.",
+            false ),
+            new ParameterDefn<bool>("LinkConstraintEnableTransMotor", "Whether to enable translational motor on linkset constraints",
+            true ),
+            new ParameterDefn<float>("LinkConstraintTransMotorMaxVel", "Maximum velocity to be applied by translational motor in linkset constraints",
+            5.0f ),
+            new ParameterDefn<float>("LinkConstraintTransMotorMaxForce", "Maximum force to be applied by translational motor in linkset constraints",
+            0.1f ),
+            new ParameterDefn<float>("LinkConstraintCFM", "Amount constraint can be violated. 0=no violation, 1=infinite. Default=0.1",
+            0.1f ),
+            new ParameterDefn<float>("LinkConstraintERP", "Amount constraint is corrected each tick. 0=none, 1=all. Default = 0.2",
+            0.1f ),
+            new ParameterDefn<float>("LinkConstraintSolverIterations", "Number of solver iterations when computing constraint. (0 = Bullet default)",
+            40 ),
+
+        new ParameterDefn<int>("PhysicsMetricFrames", "Frames between outputting detailed phys metrics. (0 is off)",
+            0,
+            (s) => { return s.PhysicsMetricDumpFrames; },
+            (s,v) => { s.PhysicsMetricDumpFrames = v; } ),
+        new ParameterDefn<float>("ResetBroadphasePool", "Setting this is any value resets the broadphase collision pool",
+            0f,
+            (s) => { return 0f; },
+            (s,v) => { BSParam.ResetBroadphasePoolTainted(s, v, false /* inTaintTime */); } ),
+        new ParameterDefn<float>("ResetConstraintSolver", "Setting this is any value resets the constraint solver",
+            0f,
+            (s) => { return 0f; },
+            (s,v) => { BSParam.ResetConstraintSolverTainted(s, v); } ),
+    };
+
+    // Convert a boolean to our numeric true and false values
+    public static float NumericBool(bool b)
+    {
+        return (b ? ConfigurationParameters.numericTrue : ConfigurationParameters.numericFalse);
+    }
+
+    // Convert numeric true and false values to a boolean
+    public static bool BoolNumeric(float b)
+    {
+        return (b == ConfigurationParameters.numericTrue ? true : false);
+    }
+
+    // Search through the parameter definitions and return the matching
+    //    ParameterDefn structure.
+    // Case does not matter as names are compared after converting to lower case.
+    // Returns 'false' if the parameter is not found.
+    internal static bool TryGetParameter(string paramName, out ParameterDefnBase defn)
+    {
+        bool ret = false;
+        ParameterDefnBase foundDefn = null;
+        string pName = paramName.ToLower();
+
+        foreach (ParameterDefnBase parm in ParameterDefinitions)
+        {
+            if (pName == parm.name.ToLower())
+            {
+                foundDefn = parm;
+                ret = true;
+                break;
+            }
+        }
+        defn = foundDefn;
+        return ret;
+    }
+
+    // Pass through the settable parameters and set the default values
+    internal static void SetParameterDefaultValues(BSScene physicsScene)
+    {
+        foreach (ParameterDefnBase parm in ParameterDefinitions)
+        {
+            parm.AssignDefault(physicsScene);
+        }
+    }
+
+    // Get user set values out of the ini file.
+    internal static void SetParameterConfigurationValues(BSScene physicsScene, IConfig cfg)
+    {
+        foreach (ParameterDefnBase parm in ParameterDefinitions)
+        {
+            parm.SetValue(physicsScene, cfg.GetString(parm.name, parm.GetValue(physicsScene)));
+        }
+    }
+
+    internal static PhysParameterEntry[] SettableParameters = new PhysParameterEntry[1];
+
+    // This creates an array in the correct format for returning the list of
+    //    parameters. This is used by the 'list' option of the 'physics' command.
+    internal static void BuildParameterTable()
+    {
+        if (SettableParameters.Length < ParameterDefinitions.Length)
+        {
+            List<PhysParameterEntry> entries = new List<PhysParameterEntry>();
+            for (int ii = 0; ii < ParameterDefinitions.Length; ii++)
+            {
+                ParameterDefnBase pd = ParameterDefinitions[ii];
+                entries.Add(new PhysParameterEntry(pd.name, pd.desc));
+            }
+
+            // make the list alphabetical for ease of finding anything
+            entries.Sort((ppe1, ppe2) => { return ppe1.name.CompareTo(ppe2.name); });
+
+            SettableParameters = entries.ToArray();
+        }
+    }
+
+    // =====================================================================
+    // =====================================================================
+    // There are parameters that, when set, cause things to happen in the physics engine.
+    // This causes the broadphase collision cache to be cleared.
+    private static void ResetBroadphasePoolTainted(BSScene pPhysScene, float v, bool inTaintTime)
+    {
+        BSScene physScene = pPhysScene;
+        physScene.TaintedObject(inTaintTime, "BSParam.ResetBroadphasePoolTainted", delegate()
+        {
+            physScene.PE.ResetBroadphasePool(physScene.World);
+        });
+    }
+
+    // This causes the constraint solver cache to be cleared and reset.
+    private static void ResetConstraintSolverTainted(BSScene pPhysScene, float v)
+    {
+        BSScene physScene = pPhysScene;
+        physScene.TaintedObject(BSScene.DetailLogZero, "BSParam.ResetConstraintSolver", delegate()
+        {
+            physScene.PE.ResetConstraintSolver(physScene.World);
+        });
+    }
+}
+}
diff --git a/OpenSim/Region/PhysicsModules/BulletS/BSPhysObject.cs b/OpenSim/Region/PhysicsModules/BulletS/BSPhysObject.cs
new file mode 100755
index 0000000..da3fc18
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/BSPhysObject.cs
@@ -0,0 +1,620 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyrightD
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+using System;
+using System.Collections.Generic;
+using System.Text;
+
+using OMV = OpenMetaverse;
+using OpenSim.Framework;
+using OpenSim.Region.PhysicsModules.SharedBase;
+
+namespace OpenSim.Region.PhysicsModule.BulletS
+{
+/*
+ * Class to wrap all objects.
+ * The rest of BulletSim doesn't need to keep checking for avatars or prims
+ *        unless the difference is significant.
+ *
+ *  Variables in the physicsl objects are in three forms:
+ *      VariableName: used by the simulator and performs taint operations, etc
+ *      RawVariableName: direct reference to the BulletSim storage for the variable value
+ *      ForceVariableName: direct reference (store and fetch) to the value in the physics engine.
+ *  The last one should only be referenced in taint-time.
+ */
+
+/*
+ * As of 20121221, the following are the call sequences (going down) for different script physical functions:
+ * llApplyImpulse       llApplyRotImpulse           llSetTorque             llSetForce
+ * SOP.ApplyImpulse     SOP.ApplyAngularImpulse     SOP.SetAngularImpulse   SOP.SetForce
+ * SOG.ApplyImpulse     SOG.ApplyAngularImpulse     SOG.SetAngularImpulse
+ * PA.AddForce          PA.AddAngularForce          PA.Torque = v           PA.Force = v
+ * BS.ApplyCentralForce BS.ApplyTorque
+ */
+
+// Flags used to denote which properties updates when making UpdateProperties calls to linksets, etc.
+public enum UpdatedProperties : uint
+{
+    Position                = 1 << 0,
+    Orientation             = 1 << 1,
+    Velocity                = 1 << 2,
+    Acceleration            = 1 << 3,
+    RotationalVelocity      = 1 << 4,
+    EntPropUpdates          = Position | Orientation | Velocity | Acceleration | RotationalVelocity,
+}
+public abstract class BSPhysObject : PhysicsActor
+{
+    protected BSPhysObject()
+    {
+    }
+    protected BSPhysObject(BSScene parentScene, uint localID, string name, string typeName)
+    {
+        IsInitialized = false;
+
+        PhysScene = parentScene;
+        LocalID = localID;
+        PhysObjectName = name;
+        Name = name;    // PhysicsActor also has the name of the object. Someday consolidate.
+        TypeName = typeName;
+
+        // Oddity if object is destroyed and recreated very quickly it could still have the old body.
+        if (!PhysBody.HasPhysicalBody)
+            PhysBody = new BulletBody(localID);
+
+        // Clean out anything that might be in the physical actor list.
+        // Again, a workaround for destroying and recreating an object very quickly.
+        PhysicalActors.Dispose();
+
+        UserSetCenterOfMassDisplacement = null;
+
+        PrimAssetState = PrimAssetCondition.Unknown;
+
+        // Initialize variables kept in base.
+        // Beware that these cause taints to be queued whch can cause race conditions on startup.
+        GravModifier = 1.0f;
+        Gravity = new OMV.Vector3(0f, 0f, BSParam.Gravity);
+        HoverActive = false;
+
+        // Default material type. Also sets Friction, Restitution and Density.
+        SetMaterial((int)MaterialAttributes.Material.Wood);
+
+        CollisionsLastTickStep = -1;
+
+        SubscribedEventsMs = 0;
+        // Crazy values that will never be true
+        CollidingStep = BSScene.NotASimulationStep;
+        CollidingGroundStep = BSScene.NotASimulationStep;
+        CollisionAccumulation = BSScene.NotASimulationStep;
+        ColliderIsMoving = false;
+        CollisionScore = 0;
+
+        // All axis free.
+        LockedLinearAxis = LockedAxisFree;
+        LockedAngularAxis = LockedAxisFree;
+    }
+
+    // Tell the object to clean up.
+    public virtual void Destroy()
+    {
+        PhysicalActors.Enable(false);
+        PhysScene.TaintedObject(LocalID, "BSPhysObject.Destroy", delegate()
+        {
+            PhysicalActors.Dispose();
+        });
+    }
+
+    public BSScene PhysScene { get; protected set; }
+    // public override uint LocalID { get; set; } // Use the LocalID definition in PhysicsActor
+    public string PhysObjectName { get; protected set; }
+    public string TypeName { get; protected set; }
+
+    // Set to 'true' when the object is completely initialized.
+    // This mostly prevents property updates and collisions until the object is completely here.
+    public bool IsInitialized { get; protected set; }
+
+    // Set to 'true' if an object (mesh/linkset/sculpty) is not completely constructed.
+    // This test is used to prevent some updates to the object when it only partially exists.
+    // There are several reasons and object might be incomplete:
+    //     Its underlying mesh/sculpty is an asset which must be fetched from the asset store
+    //     It is a linkset who is being added to or removed from
+    //     It is changing state (static to physical, for instance) which requires rebuilding
+    // This is a computed value based on the underlying physical object construction
+    abstract public bool IsIncomplete { get; }
+
+    // Return the object mass without calculating it or having side effects
+    public abstract float RawMass { get; }
+    // Set the raw mass but also update physical mass properties (inertia, ...)
+    // 'inWorld' true if the object has already been added to the dynamic world.
+    public abstract void UpdatePhysicalMassProperties(float mass, bool inWorld);
+
+    // The gravity being applied to the object. A function of default grav, GravityModifier and Buoyancy.
+    public virtual OMV.Vector3 Gravity { get; set; }
+    // The last value calculated for the prim's inertia
+    public OMV.Vector3 Inertia { get; set; }
+
+    // Reference to the physical body (btCollisionObject) of this object
+    public BulletBody PhysBody = new BulletBody(0);
+    // Reference to the physical shape (btCollisionShape) of this object
+    public BSShape PhysShape = new BSShapeNull();
+
+    // The physical representation of the prim might require an asset fetch.
+    // The asset state is first 'Unknown' then 'Waiting' then either 'Failed' or 'Fetched'.
+    public enum PrimAssetCondition
+    {
+        Unknown, Waiting, FailedAssetFetch, FailedMeshing, Fetched
+    }
+    public PrimAssetCondition PrimAssetState { get; set; }
+    public virtual bool AssetFailed()
+    {
+        return ( (this.PrimAssetState == PrimAssetCondition.FailedAssetFetch)
+              || (this.PrimAssetState == PrimAssetCondition.FailedMeshing) );
+    }
+
+    // The objects base shape information. Null if not a prim type shape.
+    public PrimitiveBaseShape BaseShape { get; protected set; }
+
+    // When the physical properties are updated, an EntityProperty holds the update values.
+    // Keep the current and last EntityProperties to enable computation of differences
+    //      between the current update and the previous values.
+    public EntityProperties CurrentEntityProperties { get; set; }
+    public EntityProperties LastEntityProperties { get; set; }
+
+    public virtual OMV.Vector3 Scale { get; set; }
+
+    // It can be confusing for an actor to know if it should move or update an object
+    //    depeneding on the setting of 'selected', 'physical, ...
+    // This flag is the true test -- if true, the object is being acted on in the physical world
+    public abstract bool IsPhysicallyActive { get; }
+
+    // Detailed state of the object.
+    public abstract bool IsSolid { get; }
+    public abstract bool IsStatic { get; }
+    public abstract bool IsSelected { get; }
+    public abstract bool IsVolumeDetect { get; }
+
+    // Materialness
+    public MaterialAttributes.Material Material { get; private set; }
+    public override void SetMaterial(int material)
+    {
+        Material = (MaterialAttributes.Material)material;
+
+        // Setting the material sets the material attributes also.
+        // TODO: decide if this is necessary -- the simulator does this.
+        MaterialAttributes matAttrib = BSMaterials.GetAttributes(Material, false);
+        Friction = matAttrib.friction;
+        Restitution = matAttrib.restitution;
+        Density = matAttrib.density;
+        // DetailLog("{0},{1}.SetMaterial,Mat={2},frict={3},rest={4},den={5}", LocalID, TypeName, Material, Friction, Restitution, Density);
+    }
+
+    public override float Density
+    {
+        get
+        {
+            return base.Density;
+        }
+        set
+        {
+            DetailLog("{0},BSPhysObject.Density,set,den={1}", LocalID, value);
+            base.Density = value;
+        }
+    }
+
+    // Stop all physical motion.
+    public abstract void ZeroMotion(bool inTaintTime);
+    public abstract void ZeroAngularMotion(bool inTaintTime);
+
+    // Update the physical location and motion of the object. Called with data from Bullet.
+    public abstract void UpdateProperties(EntityProperties entprop);
+
+    public virtual OMV.Vector3 RawPosition { get; set; }
+    public abstract OMV.Vector3 ForcePosition { get; set; }
+
+    public virtual OMV.Quaternion RawOrientation { get; set; }
+    public abstract OMV.Quaternion ForceOrientation { get; set; }
+
+    public virtual OMV.Vector3 RawVelocity { get; set; }
+    public abstract OMV.Vector3 ForceVelocity { get; set; }
+
+    public OMV.Vector3 RawForce { get; set; }
+    public OMV.Vector3 RawTorque { get; set; }
+    public override void AddAngularForce(OMV.Vector3 force, bool pushforce)
+    {
+        AddAngularForce(force, pushforce, false);
+    }
+    public abstract void AddAngularForce(OMV.Vector3 force, bool pushforce, bool inTaintTime);
+    public abstract void AddForce(OMV.Vector3 force, bool pushforce, bool inTaintTime);
+
+    public abstract OMV.Vector3 ForceRotationalVelocity { get; set; }
+
+    public abstract float ForceBuoyancy { get; set; }
+
+    public virtual bool ForceBodyShapeRebuild(bool inTaintTime) { return false; }
+
+    public override bool PIDActive 
+    {
+        get { return MoveToTargetActive; }
+        set { MoveToTargetActive = value; } 
+    }
+
+    public override OMV.Vector3 PIDTarget { set { MoveToTargetTarget = value; } }
+    public override float PIDTau { set { MoveToTargetTau = value; } }
+
+    public bool MoveToTargetActive { get; set; }
+    public OMV.Vector3 MoveToTargetTarget { get; set; }
+    public float MoveToTargetTau { get; set; }
+
+    // Used for llSetHoverHeight and maybe vehicle height. Hover Height will override MoveTo target's Z
+    public override bool PIDHoverActive { set { HoverActive = value; } }
+    public override float PIDHoverHeight { set { HoverHeight = value; } }
+    public override PIDHoverType PIDHoverType { set { HoverType = value; } }
+    public override float PIDHoverTau { set { HoverTau = value; } }
+
+    public bool HoverActive { get; set; }
+    public float HoverHeight { get;  set; }
+    public PIDHoverType HoverType { get;  set; }
+    public float HoverTau { get; set; }
+
+    // For RotLookAt
+    public override OMV.Quaternion APIDTarget { set { return; } }
+    public override bool APIDActive { set { return; } }
+    public override float APIDStrength { set { return; } }
+    public override float APIDDamping { set { return; } }
+
+    // The current velocity forward
+    public virtual float ForwardSpeed
+    {
+        get
+        {
+            OMV.Vector3 characterOrientedVelocity = RawVelocity * OMV.Quaternion.Inverse(OMV.Quaternion.Normalize(RawOrientation));
+            return characterOrientedVelocity.X;
+        }
+    }
+    // The forward speed we are trying to achieve (TargetVelocity)
+    public virtual float TargetVelocitySpeed
+    {
+        get
+        {
+            OMV.Vector3 characterOrientedVelocity = TargetVelocity * OMV.Quaternion.Inverse(OMV.Quaternion.Normalize(RawOrientation));
+            return characterOrientedVelocity.X;
+        }
+    }
+
+    // The user can optionally set the center of mass. The user's setting will override any
+    //    computed center-of-mass (like in linksets).
+    // Note this is a displacement from the root's coordinates. Zero means use the root prim as center-of-mass.
+    public OMV.Vector3? UserSetCenterOfMassDisplacement { get; set; }
+
+    public OMV.Vector3 LockedLinearAxis;   // zero means locked. one means free.
+    public OMV.Vector3 LockedAngularAxis;  // zero means locked. one means free.
+    public const float FreeAxis = 1f;
+    public const float LockedAxis = 0f;
+    public readonly OMV.Vector3 LockedAxisFree = new OMV.Vector3(FreeAxis, FreeAxis, FreeAxis);  // All axis are free
+
+    // If an axis is locked (flagged above) then the limits of that axis are specified here.
+    // Linear axis limits are relative to the object's starting coordinates.
+    // Angular limits are limited to -PI to +PI
+    public OMV.Vector3 LockedLinearAxisLow;
+    public OMV.Vector3 LockedLinearAxisHigh;
+    public OMV.Vector3 LockedAngularAxisLow;
+    public OMV.Vector3 LockedAngularAxisHigh;
+
+    // Enable physical actions. Bullet will keep sleeping non-moving physical objects so
+    //     they need waking up when parameters are changed.
+    // Called in taint-time!!
+    public void ActivateIfPhysical(bool forceIt)
+    {
+        if (PhysBody.HasPhysicalBody)
+        {
+            if (IsPhysical)
+            {
+                // Physical objects might need activating
+                PhysScene.PE.Activate(PhysBody, forceIt);
+            }
+            else
+            {
+                // Clear the collision cache since we've changed some properties.
+                PhysScene.PE.ClearCollisionProxyCache(PhysScene.World, PhysBody);
+            }
+        }
+    }
+
+    // 'actors' act on the physical object to change or constrain its motion. These can range from
+    //       hovering to complex vehicle motion.
+    // May be called at non-taint time as this just adds the actor to the action list and the real
+    //    work is done during the simulation step.
+    // Note that, if the actor is already in the list and we are disabling same, the actor is just left
+    //    in the list disabled.
+    public delegate BSActor CreateActor();
+    public void EnableActor(bool enableActor, string actorName, CreateActor creator)
+    {
+        lock (PhysicalActors)
+        {
+            BSActor theActor;
+            if (PhysicalActors.TryGetActor(actorName, out theActor))
+            {
+                // The actor already exists so just turn it on or off
+                DetailLog("{0},BSPhysObject.EnableActor,enablingExistingActor,name={1},enable={2}", LocalID, actorName, enableActor);
+                theActor.Enabled = enableActor;
+            }
+            else
+            {
+                // The actor does not exist. If it should, create it.
+                if (enableActor)
+                {
+                    DetailLog("{0},BSPhysObject.EnableActor,creatingActor,name={1}", LocalID, actorName);
+                    theActor = creator();
+                    PhysicalActors.Add(actorName, theActor);
+                    theActor.Enabled = true;
+                }
+                else
+                {
+                    DetailLog("{0},BSPhysObject.EnableActor,notCreatingActorSinceNotEnabled,name={1}", LocalID, actorName);
+                }
+            }
+        }
+    }
+
+    #region Collisions
+
+    // Requested number of milliseconds between collision events. Zero means disabled.
+    protected int SubscribedEventsMs { get; set; }
+    // Given subscription, the time that a collision may be passed up
+    protected int NextCollisionOkTime { get; set; }
+    // The simulation step that last had a collision
+    protected long CollidingStep { get; set; }
+    // The simulation step that last had a collision with the ground
+    protected long CollidingGroundStep { get; set; }
+    // The simulation step that last collided with an object
+    protected long CollidingObjectStep { get; set; }
+    // The collision flags we think are set in Bullet
+    protected CollisionFlags CurrentCollisionFlags { get; set; }
+    // On a collision, check the collider and remember if the last collider was moving
+    //    Used to modify the standing of avatars (avatars on stationary things stand still)
+    public bool ColliderIsMoving;
+    // 'true' if the last collider was a volume detect object
+    public bool ColliderIsVolumeDetect;
+    // Used by BSCharacter to manage standing (and not slipping)
+    public bool IsStationary;
+
+    // Count of collisions for this object
+    protected long CollisionAccumulation { get; set; }
+
+    public override bool IsColliding {
+        get { return (CollidingStep == PhysScene.SimulationStep); }
+        set {
+            if (value)
+                CollidingStep = PhysScene.SimulationStep;
+            else
+                CollidingStep = BSScene.NotASimulationStep;
+            }
+    }
+    // Complex objects (like linksets) need to know if there is a collision on any part of
+    //    their shape. 'IsColliding' has an existing definition of reporting a collision on
+    //    only this specific prim or component of linksets.
+    // 'HasSomeCollision' is defined as reporting if there is a collision on any part of
+    //    the complex body that this prim is the root of.
+    public virtual bool HasSomeCollision
+    {
+        get { return IsColliding; }
+        set { IsColliding = value; }
+    }
+    public override bool CollidingGround {
+        get { return (CollidingGroundStep == PhysScene.SimulationStep); }
+        set
+        {
+            if (value)
+                CollidingGroundStep = PhysScene.SimulationStep;
+            else
+                CollidingGroundStep = BSScene.NotASimulationStep;
+        }
+    }
+    public override bool CollidingObj {
+        get { return (CollidingObjectStep == PhysScene.SimulationStep); }
+        set {
+            if (value)
+                CollidingObjectStep = PhysScene.SimulationStep;
+            else
+                CollidingObjectStep = BSScene.NotASimulationStep;
+        }
+    }
+
+    // The collisions that have been collected for the next collision reporting (throttled by subscription)
+    protected CollisionEventUpdate CollisionCollection = new CollisionEventUpdate();
+    // This is the collision collection last reported to the Simulator.
+    public CollisionEventUpdate CollisionsLastReported = new CollisionEventUpdate();
+    // Remember the collisions recorded in the last tick for fancy collision checking
+    //     (like a BSCharacter walking up stairs).
+    public CollisionEventUpdate CollisionsLastTick = new CollisionEventUpdate();
+    private long CollisionsLastTickStep = -1;
+
+    // The simulation step is telling this object about a collision.
+    // Return 'true' if a collision was processed and should be sent up.
+    // Return 'false' if this object is not enabled/subscribed/appropriate for or has already seen this collision.
+    // Called at taint time from within the Step() function
+    public delegate bool CollideCall(uint collidingWith, BSPhysObject collidee, OMV.Vector3 contactPoint, OMV.Vector3 contactNormal, float pentrationDepth);
+    public virtual bool Collide(uint collidingWith, BSPhysObject collidee,
+                    OMV.Vector3 contactPoint, OMV.Vector3 contactNormal, float pentrationDepth)
+    {
+        bool ret = false;
+
+        // The following lines make IsColliding(), CollidingGround() and CollidingObj work
+        CollidingStep = PhysScene.SimulationStep;
+        if (collidingWith <= PhysScene.TerrainManager.HighestTerrainID)
+        {
+            CollidingGroundStep = PhysScene.SimulationStep;
+        }
+        else
+        {
+            CollidingObjectStep = PhysScene.SimulationStep;
+        }
+
+        CollisionAccumulation++;
+
+        // For movement tests, remember if we are colliding with an object that is moving.
+        ColliderIsMoving = collidee != null ? (collidee.RawVelocity != OMV.Vector3.Zero) : false;
+        ColliderIsVolumeDetect = collidee != null ? (collidee.IsVolumeDetect) : false;
+
+        // Make a collection of the collisions that happened the last simulation tick.
+        // This is different than the collection created for sending up to the simulator as it is cleared every tick.
+        if (CollisionsLastTickStep != PhysScene.SimulationStep)
+        {
+            CollisionsLastTick = new CollisionEventUpdate();
+            CollisionsLastTickStep = PhysScene.SimulationStep;
+        }
+        CollisionsLastTick.AddCollider(collidingWith, new ContactPoint(contactPoint, contactNormal, pentrationDepth));
+
+        // If someone has subscribed for collision events log the collision so it will be reported up
+        if (SubscribedEvents()) {
+            lock (PhysScene.CollisionLock)
+            {
+                CollisionCollection.AddCollider(collidingWith, new ContactPoint(contactPoint, contactNormal, pentrationDepth));
+            }
+            DetailLog("{0},{1}.Collision.AddCollider,call,with={2},point={3},normal={4},depth={5},colliderMoving={6}",
+                            LocalID, TypeName, collidingWith, contactPoint, contactNormal, pentrationDepth, ColliderIsMoving);
+
+            ret = true;
+        }
+        return ret;
+    }
+
+    // Send the collected collisions into the simulator.
+    // Called at taint time from within the Step() function thus no locking problems
+    //      with CollisionCollection and ObjectsWithNoMoreCollisions.
+    // Called with BSScene.CollisionLock locked to protect the collision lists.
+    // Return 'true' if there were some actual collisions passed up
+    public virtual bool SendCollisions()
+    {
+        bool ret = true;
+
+        // If no collisions this call but there were collisions last call, force the collision
+        //     event to be happen right now so quick collision_end.
+        bool force = (CollisionCollection.Count == 0 && CollisionsLastReported.Count != 0);
+
+        // throttle the collisions to the number of milliseconds specified in the subscription
+        if (force || (PhysScene.SimulationNowTime >= NextCollisionOkTime))
+        {
+            NextCollisionOkTime = PhysScene.SimulationNowTime + SubscribedEventsMs;
+
+            // We are called if we previously had collisions. If there are no collisions
+            //   this time, send up one last empty event so OpenSim can sense collision end.
+            if (CollisionCollection.Count == 0)
+            {
+                // If I have no collisions this time, remove me from the list of objects with collisions.
+                ret = false;
+            }
+
+            DetailLog("{0},{1}.SendCollisionUpdate,call,numCollisions={2}", LocalID, TypeName, CollisionCollection.Count);
+            base.SendCollisionUpdate(CollisionCollection);
+
+            // Remember the collisions from this tick for some collision specific processing.
+            CollisionsLastReported = CollisionCollection;
+
+            // The CollisionCollection instance is passed around in the simulator.
+            // Make sure we don't have a handle to that one and that a new one is used for next time.
+            //    This fixes an interesting 'gotcha'. If we call CollisionCollection.Clear() here,
+            //    a race condition is created for the other users of this instance.
+            CollisionCollection = new CollisionEventUpdate();
+        }
+        return ret;
+    }
+
+    // Subscribe for collision events.
+    // Parameter is the millisecond rate the caller wishes collision events to occur.
+    public override void SubscribeEvents(int ms) {
+        // DetailLog("{0},{1}.SubscribeEvents,subscribing,ms={2}", LocalID, TypeName, ms);
+        SubscribedEventsMs = ms;
+        if (ms > 0)
+        {
+            // make sure first collision happens
+            NextCollisionOkTime = Util.EnvironmentTickCountSubtract(SubscribedEventsMs);
+
+            PhysScene.TaintedObject(LocalID, TypeName+".SubscribeEvents", delegate()
+            {
+                if (PhysBody.HasPhysicalBody)
+                    CurrentCollisionFlags = PhysScene.PE.AddToCollisionFlags(PhysBody, CollisionFlags.BS_SUBSCRIBE_COLLISION_EVENTS);
+            });
+        }
+        else
+        {
+            // Subscribing for zero or less is the same as unsubscribing
+            UnSubscribeEvents();
+        }
+    }
+    public override void UnSubscribeEvents() {
+        // DetailLog("{0},{1}.UnSubscribeEvents,unsubscribing", LocalID, TypeName);
+        SubscribedEventsMs = 0;
+        PhysScene.TaintedObject(LocalID, TypeName+".UnSubscribeEvents", delegate()
+        {
+            // Make sure there is a body there because sometimes destruction happens in an un-ideal order.
+            if (PhysBody.HasPhysicalBody)
+                CurrentCollisionFlags = PhysScene.PE.RemoveFromCollisionFlags(PhysBody, CollisionFlags.BS_SUBSCRIBE_COLLISION_EVENTS);
+        });
+    }
+    // Return 'true' if the simulator wants collision events
+    public override bool SubscribedEvents() {
+        return (SubscribedEventsMs > 0);
+    }
+    // Because 'CollisionScore' is called many times while sorting, it should not be recomputed
+    //    each time called. So this is built to be light weight for each collision and to do
+    //    all the processing when the user asks for the info.
+    public void ComputeCollisionScore()
+    {
+        // Scale the collision count by the time since the last collision.
+        // The "+1" prevents dividing by zero.
+        long timeAgo = PhysScene.SimulationStep - CollidingStep + 1;
+        CollisionScore = CollisionAccumulation / timeAgo;
+    }
+    public override float CollisionScore { get; set; }
+
+    #endregion // Collisions
+
+    #region Per Simulation Step actions
+
+    public BSActorCollection PhysicalActors = new BSActorCollection();
+
+    // When an update to the physical properties happens, this event is fired to let
+    //    different actors to modify the update before it is passed around
+    public delegate void PreUpdatePropertyAction(ref EntityProperties entprop);
+    public event PreUpdatePropertyAction OnPreUpdateProperty;
+    protected void TriggerPreUpdatePropertyAction(ref EntityProperties entprop)
+    {
+        PreUpdatePropertyAction actions = OnPreUpdateProperty;
+        if (actions != null)
+            actions(ref entprop);
+    }
+
+    #endregion // Per Simulation Step actions
+
+    // High performance detailed logging routine used by the physical objects.
+    protected void DetailLog(string msg, params Object[] args)
+    {
+        if (PhysScene.PhysicsLogging.Enabled)
+            PhysScene.DetailLog(msg, args);
+    }
+
+}
+}
diff --git a/OpenSim/Region/PhysicsModules/BulletS/BSPrim.cs b/OpenSim/Region/PhysicsModules/BulletS/BSPrim.cs
new file mode 100644
index 0000000..6f27ac7
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/BSPrim.cs
@@ -0,0 +1,1895 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyrightD
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+using System;
+using System.Reflection;
+using System.Collections.Generic;
+using System.Xml;
+using log4net;
+using OMV = OpenMetaverse;
+using OpenSim.Framework;
+using OpenSim.Region.PhysicsModules.SharedBase;
+using OpenSim.Region.PhysicsModule.ConvexDecompositionDotNet;
+
+namespace OpenSim.Region.PhysicsModule.BulletS
+{
+
+    [Serializable]
+public class BSPrim : BSPhysObject
+{
+    protected static readonly ILog m_log = LogManager.GetLogger(MethodBase.GetCurrentMethod().DeclaringType);
+    private static readonly string LogHeader = "[BULLETS PRIM]";
+
+    // _size is what the user passed. Scale is what we pass to the physics engine with the mesh.
+    private OMV.Vector3 _size;  // the multiplier for each mesh dimension as passed by the user
+
+    private bool _grabbed;
+    private bool _isSelected;
+    private bool _isVolumeDetect;
+
+    private float _mass;    // the mass of this object
+    private OMV.Vector3 _acceleration;
+    private int _physicsActorType;
+    private bool _isPhysical;
+    private bool _flying;
+    private bool _setAlwaysRun;
+    private bool _throttleUpdates;
+    private bool _floatOnWater;
+    private OMV.Vector3 _rotationalVelocity;
+    private bool _kinematic;
+    private float _buoyancy;
+
+    private int CrossingFailures { get; set; }
+
+    // Keep a handle to the vehicle actor so it is easy to set parameters on same.
+    public const string VehicleActorName = "BasicVehicle";
+
+    // Parameters for the hover actor
+    public const string HoverActorName = "BSPrim.HoverActor";
+    // Parameters for the axis lock actor
+    public const String LockedAxisActorName = "BSPrim.LockedAxis";
+    // Parameters for the move to target actor
+    public const string MoveToTargetActorName = "BSPrim.MoveToTargetActor";
+    // Parameters for the setForce and setTorque actors
+    public const string SetForceActorName = "BSPrim.SetForceActor";
+    public const string SetTorqueActorName = "BSPrim.SetTorqueActor";
+
+    public BSPrim(uint localID, String primName, BSScene parent_scene, OMV.Vector3 pos, OMV.Vector3 size,
+                       OMV.Quaternion rotation, PrimitiveBaseShape pbs, bool pisPhysical)
+            : base(parent_scene, localID, primName, "BSPrim")
+    {
+        // m_log.DebugFormat("{0}: BSPrim creation of {1}, id={2}", LogHeader, primName, localID);
+        _physicsActorType = (int)ActorTypes.Prim;
+        RawPosition = pos;
+        _size = size;
+        Scale = size;   // prims are the size the user wants them to be (different for BSCharactes).
+        RawOrientation = rotation;
+        _buoyancy = 0f;
+        RawVelocity = OMV.Vector3.Zero;
+        _rotationalVelocity = OMV.Vector3.Zero;
+        BaseShape = pbs;
+        _isPhysical = pisPhysical;
+        _isVolumeDetect = false;
+
+        _mass = CalculateMass();
+
+        DetailLog("{0},BSPrim.constructor,pbs={1}", LocalID, BSScene.PrimitiveBaseShapeToString(pbs));
+        // DetailLog("{0},BSPrim.constructor,call", LocalID);
+        // do the actual object creation at taint time
+        PhysScene.TaintedObject(LocalID, "BSPrim.create", delegate()
+        {
+            // Make sure the object is being created with some sanity.
+            ExtremeSanityCheck(true /* inTaintTime */);
+
+            CreateGeomAndObject(true);
+
+            CurrentCollisionFlags = PhysScene.PE.GetCollisionFlags(PhysBody);
+
+            IsInitialized = true;
+        });
+    }
+
+    // called when this prim is being destroyed and we should free all the resources
+    public override void Destroy()
+    {
+        // m_log.DebugFormat("{0}: Destroy, id={1}", LogHeader, LocalID);
+        IsInitialized = false;
+
+        base.Destroy();
+
+        // Undo any vehicle properties
+        this.VehicleType = (int)Vehicle.TYPE_NONE;
+
+        PhysScene.TaintedObject(LocalID, "BSPrim.Destroy", delegate()
+        {
+            DetailLog("{0},BSPrim.Destroy,taint,", LocalID);
+            // If there are physical body and shape, release my use of same.
+            PhysScene.Shapes.DereferenceBody(PhysBody, null);
+            PhysBody.Clear();
+            PhysShape.Dereference(PhysScene);
+            PhysShape = new BSShapeNull();
+        });
+    }
+
+    // No one uses this property.
+    public override bool Stopped {
+        get { return false; }
+    }
+
+    public override bool IsIncomplete {
+        get {
+            return ShapeRebuildScheduled;
+        }
+    }
+
+    // 'true' if this object's shape is in need of a rebuild and a rebuild has been queued.
+    // The prim is still available but its underlying shape will change soon.
+    // This is protected by a 'lock(this)'.
+    public bool ShapeRebuildScheduled { get; protected set; }
+
+    public override OMV.Vector3 Size {
+        get { return _size; }
+        set {
+            // We presume the scale and size are the same. If scale must be changed for
+            //     the physical shape, that is done when the geometry is built.
+            _size = value;
+            Scale = _size;
+            ForceBodyShapeRebuild(false);
+        }
+    }
+
+    public override PrimitiveBaseShape Shape {
+        set {
+            BaseShape = value;
+            DetailLog("{0},BSPrim.changeShape,pbs={1}", LocalID, BSScene.PrimitiveBaseShapeToString(BaseShape));
+            PrimAssetState = PrimAssetCondition.Unknown;
+            ForceBodyShapeRebuild(false);
+        }
+    }
+    // Cause the body and shape of the prim to be rebuilt if necessary.
+    // If there are no changes required, this is quick and does not make changes to the prim.
+    // If rebuilding is necessary (like changing from static to physical), that will happen.
+    // The 'ShapeRebuildScheduled' tells any checker that the body/shape may change shortly.
+    // The return parameter is not used by anyone.
+    public override bool ForceBodyShapeRebuild(bool inTaintTime)
+    {
+        if (inTaintTime)
+        {
+            // If called in taint time, do the operation immediately
+            _mass = CalculateMass();   // changing the shape changes the mass
+            CreateGeomAndObject(true);
+        }
+        else
+        {
+            lock (this)
+            {
+                // If a rebuild is not already in the queue
+                if (!ShapeRebuildScheduled)
+                {
+                    // Remember that a rebuild is queued -- this is used to flag an incomplete object
+                    ShapeRebuildScheduled = true;
+                    PhysScene.TaintedObject(LocalID, "BSPrim.ForceBodyShapeRebuild", delegate()
+                    {
+                        _mass = CalculateMass();   // changing the shape changes the mass
+                        CreateGeomAndObject(true);
+                        ShapeRebuildScheduled = false;
+                    });
+                }
+            }
+        }
+        return true;
+    }
+    public override bool Grabbed {
+        set { _grabbed = value;
+        }
+    }
+    public override bool Selected {
+        set
+        {
+            if (value != _isSelected)
+            {
+                _isSelected = value;
+                PhysScene.TaintedObject(LocalID, "BSPrim.setSelected", delegate()
+                {
+                    DetailLog("{0},BSPrim.selected,taint,selected={1}", LocalID, _isSelected);
+                    SetObjectDynamic(false);
+                });
+            }
+        }
+    }
+    public override bool IsSelected
+    {
+        get { return _isSelected; }
+    }
+
+    public override void CrossingFailure()
+    {
+        CrossingFailures++;
+        if (CrossingFailures > BSParam.CrossingFailuresBeforeOutOfBounds)
+        {
+            base.RaiseOutOfBounds(RawPosition);
+        }
+        else if (CrossingFailures == BSParam.CrossingFailuresBeforeOutOfBounds)
+        {
+            m_log.WarnFormat("{0} Too many crossing failures for {1}", LogHeader, Name);
+        }
+        return;
+    }
+
+    // link me to the specified parent
+    public override void link(PhysicsActor obj) {
+    }
+
+    // delink me from my linkset
+    public override void delink() {
+    }
+
+    // Set motion values to zero.
+    // Do it to the properties so the values get set in the physics engine.
+    // Push the setting of the values to the viewer.
+    // Called at taint time!
+    public override void ZeroMotion(bool inTaintTime)
+    {
+        RawVelocity = OMV.Vector3.Zero;
+        _acceleration = OMV.Vector3.Zero;
+        _rotationalVelocity = OMV.Vector3.Zero;
+
+        // Zero some other properties in the physics engine
+        PhysScene.TaintedObject(inTaintTime, LocalID, "BSPrim.ZeroMotion", delegate()
+        {
+            if (PhysBody.HasPhysicalBody)
+                PhysScene.PE.ClearAllForces(PhysBody);
+        });
+    }
+    public override void ZeroAngularMotion(bool inTaintTime)
+    {
+        _rotationalVelocity = OMV.Vector3.Zero;
+        // Zero some other properties in the physics engine
+        PhysScene.TaintedObject(inTaintTime, LocalID, "BSPrim.ZeroMotion", delegate()
+        {
+            // DetailLog("{0},BSPrim.ZeroAngularMotion,call,rotVel={1}", LocalID, _rotationalVelocity);
+            if (PhysBody.HasPhysicalBody)
+            {
+                PhysScene.PE.SetInterpolationAngularVelocity(PhysBody, _rotationalVelocity);
+                PhysScene.PE.SetAngularVelocity(PhysBody, _rotationalVelocity);
+            }
+        });
+    }
+
+    public override void LockAngularMotion(OMV.Vector3 axis)
+    {
+        DetailLog("{0},BSPrim.LockAngularMotion,call,axis={1}", LocalID, axis);
+
+        ApplyAxisLimits(ExtendedPhysics.PHYS_AXIS_UNLOCK_ANGULAR, 0f, 0f);
+        if (axis.X != 1)
+        {
+            ApplyAxisLimits(ExtendedPhysics.PHYS_AXIS_LOCK_ANGULAR_X, 0f, 0f);
+        }
+        if (axis.Y != 1)
+        {
+            ApplyAxisLimits(ExtendedPhysics.PHYS_AXIS_LOCK_ANGULAR_Y, 0f, 0f);
+        }
+        if (axis.Z != 1)
+        {
+            ApplyAxisLimits(ExtendedPhysics.PHYS_AXIS_LOCK_ANGULAR_Z, 0f, 0f);
+        }
+
+        InitializeAxisActor();
+
+        return;
+    }
+
+    public override OMV.Vector3 Position {
+        get {
+            // don't do the GetObjectPosition for root elements because this function is called a zillion times.
+            // RawPosition = ForcePosition;
+            return RawPosition;
+        }
+        set {
+            // If the position must be forced into the physics engine, use ForcePosition.
+            // All positions are given in world positions.
+            if (RawPosition == value)
+            {
+                DetailLog("{0},BSPrim.setPosition,call,positionNotChanging,pos={1},orient={2}", LocalID, RawPosition, RawOrientation);
+                return;
+            }
+            RawPosition = value;
+            PositionSanityCheck(false);
+
+            PhysScene.TaintedObject(LocalID, "BSPrim.setPosition", delegate()
+            {
+                DetailLog("{0},BSPrim.SetPosition,taint,pos={1},orient={2}", LocalID, RawPosition, RawOrientation);
+                ForcePosition = RawPosition;
+            });
+        }
+    }
+
+    // NOTE: overloaded by BSPrimDisplaced to handle offset for center-of-gravity.
+    public override OMV.Vector3 ForcePosition {
+        get {
+            RawPosition = PhysScene.PE.GetPosition(PhysBody);
+            return RawPosition;
+        }
+        set {
+            RawPosition = value;
+            if (PhysBody.HasPhysicalBody)
+            {
+                PhysScene.PE.SetTranslation(PhysBody, RawPosition, RawOrientation);
+                ActivateIfPhysical(false);
+            }
+        }
+    }
+
+    // Check that the current position is sane and, if not, modify the position to make it so.
+    // Check for being below terrain and being out of bounds.
+    // Returns 'true' of the position was made sane by some action.
+    private bool PositionSanityCheck(bool inTaintTime)
+    {
+        bool ret = false;
+
+        // We don't care where non-physical items are placed
+        if (!IsPhysicallyActive)
+            return ret;
+
+        if (!PhysScene.TerrainManager.IsWithinKnownTerrain(RawPosition))
+        {
+            // The physical object is out of the known/simulated area.
+            // Upper levels of code will handle the transition to other areas so, for
+            //     the time, we just ignore the position.
+            return ret;
+        }
+
+        float terrainHeight = PhysScene.TerrainManager.GetTerrainHeightAtXYZ(RawPosition);
+        OMV.Vector3 upForce = OMV.Vector3.Zero;
+        float approxSize = Math.Max(Size.X, Math.Max(Size.Y, Size.Z));
+        if ((RawPosition.Z + approxSize / 2f) < terrainHeight)
+        {
+            DetailLog("{0},BSPrim.PositionAdjustUnderGround,call,pos={1},terrain={2}", LocalID, RawPosition, terrainHeight);
+            float targetHeight = terrainHeight + (Size.Z / 2f);
+            // If the object is below ground it just has to be moved up because pushing will
+            //     not get it through the terrain
+            RawPosition = new OMV.Vector3(RawPosition.X, RawPosition.Y, targetHeight);
+            if (inTaintTime)
+            {
+                ForcePosition = RawPosition;
+            }
+            // If we are throwing the object around, zero its other forces
+            ZeroMotion(inTaintTime);
+            ret = true;
+        }
+
+        if ((CurrentCollisionFlags & CollisionFlags.BS_FLOATS_ON_WATER) != 0)
+        {
+            float waterHeight = PhysScene.TerrainManager.GetWaterLevelAtXYZ(RawPosition);
+            // TODO: a floating motor so object will bob in the water
+            if (Math.Abs(RawPosition.Z - waterHeight) > 0.1f)
+            {
+                // Upforce proportional to the distance away from the water. Correct the error in 1 sec.
+                upForce.Z = (waterHeight - RawPosition.Z) * 1f;
+
+                // Apply upforce and overcome gravity.
+                OMV.Vector3 correctionForce = upForce - PhysScene.DefaultGravity;
+                DetailLog("{0},BSPrim.PositionSanityCheck,applyForce,pos={1},upForce={2},correctionForce={3}", LocalID, RawPosition, upForce, correctionForce);
+                AddForce(correctionForce, false, inTaintTime);
+                ret = true;
+            }
+        }
+
+        return ret;
+    }
+
+    // Occasionally things will fly off and really get lost.
+    // Find the wanderers and bring them back.
+    // Return 'true' if some parameter need some sanity.
+    private bool ExtremeSanityCheck(bool inTaintTime)
+    {
+        bool ret = false;
+
+        int wayOverThere = -1000;
+        int wayOutThere = 10000;
+        // There have been instances of objects getting thrown way out of bounds and crashing
+        //    the border crossing code.
+        if (   RawPosition.X < wayOverThere || RawPosition.X > wayOutThere
+            || RawPosition.Y < wayOverThere || RawPosition.X > wayOutThere
+            || RawPosition.Z < wayOverThere || RawPosition.X > wayOutThere)
+        {
+            RawPosition = new OMV.Vector3(10, 10, 50);
+            ZeroMotion(inTaintTime);
+            ret = true;
+        }
+        if (RawVelocity.LengthSquared() > BSParam.MaxLinearVelocitySquared)
+        {
+            RawVelocity = Util.ClampV(RawVelocity, BSParam.MaxLinearVelocity);
+            ret = true;
+        }
+        if (_rotationalVelocity.LengthSquared() > BSParam.MaxAngularVelocitySquared)
+        {
+            _rotationalVelocity = Util.ClampV(_rotationalVelocity, BSParam.MaxAngularVelocity);
+            ret = true;
+        }
+
+        return ret;
+    }
+
+    // Return the effective mass of the object.
+        // The definition of this call is to return the mass of the prim.
+        // If the simulator cares about the mass of the linkset, it will sum it itself.
+    public override float Mass
+    {
+        get { return _mass; }
+    }
+    // TotalMass returns the mass of the large object the prim may be in (overridden by linkset code)
+    public virtual float TotalMass
+    {
+        get { return _mass; }
+    }
+    // used when we only want this prim's mass and not the linkset thing
+    public override float RawMass {
+        get { return _mass; }
+    }
+    // Set the physical mass to the passed mass.
+    // Note that this does not change _mass!
+    public override void UpdatePhysicalMassProperties(float physMass, bool inWorld)
+    {
+        if (PhysBody.HasPhysicalBody && PhysShape.HasPhysicalShape)
+        {
+            if (IsStatic)
+            {
+                PhysScene.PE.SetGravity(PhysBody, PhysScene.DefaultGravity);
+                Inertia = OMV.Vector3.Zero;
+                PhysScene.PE.SetMassProps(PhysBody, 0f, Inertia);
+                PhysScene.PE.UpdateInertiaTensor(PhysBody);
+            }
+            else
+            {
+                if (inWorld)
+                {
+                    // Changing interesting properties doesn't change proxy and collision cache
+                    //    information. The Bullet solution is to re-add the object to the world
+                    //    after parameters are changed.
+                    PhysScene.PE.RemoveObjectFromWorld(PhysScene.World, PhysBody);
+                }
+
+                // The computation of mass props requires gravity to be set on the object.
+                Gravity = ComputeGravity(Buoyancy);
+                PhysScene.PE.SetGravity(PhysBody, Gravity);
+
+                // OMV.Vector3 currentScale = PhysScene.PE.GetLocalScaling(PhysShape.physShapeInfo);   // DEBUG DEBUG
+                // DetailLog("{0},BSPrim.UpdateMassProperties,currentScale{1},shape={2}", LocalID, currentScale, PhysShape.physShapeInfo);   // DEBUG DEBUG
+
+                Inertia = PhysScene.PE.CalculateLocalInertia(PhysShape.physShapeInfo, physMass);
+                PhysScene.PE.SetMassProps(PhysBody, physMass, Inertia);
+                PhysScene.PE.UpdateInertiaTensor(PhysBody);
+
+                DetailLog("{0},BSPrim.UpdateMassProperties,mass={1},localInertia={2},grav={3},inWorld={4}",
+                                            LocalID, physMass, Inertia, Gravity, inWorld);
+
+                if (inWorld)
+                {
+                    AddObjectToPhysicalWorld();
+                }
+            }
+        }
+    }
+
+    // Return what gravity should be set to this very moment
+    public OMV.Vector3 ComputeGravity(float buoyancy)
+    {
+        OMV.Vector3 ret = PhysScene.DefaultGravity;
+
+        if (!IsStatic)
+        {
+            ret *= (1f - buoyancy);
+            ret *= GravModifier;
+        }
+
+        return ret;
+    }
+
+    // Is this used?
+    public override OMV.Vector3 CenterOfMass
+    {
+        get { return RawPosition; }
+    }
+
+    // Is this used?
+    public override OMV.Vector3 GeometricCenter
+    {
+        get { return RawPosition; }
+    }
+
+    public override OMV.Vector3 Force {
+        get { return RawForce; }
+        set {
+            RawForce = value;
+            EnableActor(RawForce != OMV.Vector3.Zero, SetForceActorName, delegate()
+            {
+                return new BSActorSetForce(PhysScene, this, SetForceActorName);
+            });
+
+            // Call update so actor Refresh() is called to start things off
+            PhysScene.TaintedObject(LocalID, "BSPrim.setForce", delegate()
+            {
+                UpdatePhysicalParameters();
+            });
+        }
+    }
+
+    // Find and return a handle to the current vehicle actor.
+    // Return 'null' if there is no vehicle actor.
+    public BSDynamics GetVehicleActor(bool createIfNone)
+    {
+        BSDynamics ret = null;
+        BSActor actor;
+        if (PhysicalActors.TryGetActor(VehicleActorName, out actor))
+        {
+            ret = actor as BSDynamics;
+        }
+        else
+        {
+            if (createIfNone)
+            {
+                ret = new BSDynamics(PhysScene, this, VehicleActorName);
+                PhysicalActors.Add(ret.ActorName, ret);
+            }
+        }
+        return ret;
+    }
+
+    public override int VehicleType {
+        get {
+            int ret = (int)Vehicle.TYPE_NONE;
+            BSDynamics vehicleActor = GetVehicleActor(false /* createIfNone */);
+            if (vehicleActor != null)
+                ret = (int)vehicleActor.Type;
+            return ret;
+        }
+        set {
+            Vehicle type = (Vehicle)value;
+
+            PhysScene.TaintedObject(LocalID, "setVehicleType", delegate()
+            {
+                // Some vehicle scripts change vehicle type on the fly as an easy way to
+                //    change all the parameters. Like a plane changing to CAR when on the
+                //    ground. In this case, don't want to zero motion.
+                // ZeroMotion(true /* inTaintTime */);
+                if (type == Vehicle.TYPE_NONE)
+                {
+                    // Vehicle type is 'none' so get rid of any actor that may have been allocated.
+                    BSDynamics vehicleActor = GetVehicleActor(false /* createIfNone */);
+                    if (vehicleActor != null)
+                    {
+                        PhysicalActors.RemoveAndRelease(vehicleActor.ActorName);
+                    }
+                }
+                else
+                {
+                    // Vehicle type is not 'none' so create an actor and set it running.
+                    BSDynamics vehicleActor = GetVehicleActor(true /* createIfNone */);
+                    if (vehicleActor != null)
+                    {
+                        vehicleActor.ProcessTypeChange(type);
+                        ActivateIfPhysical(false);
+                    }
+                }
+            });
+        }
+    }
+    public override void VehicleFloatParam(int param, float value)
+    {
+        PhysScene.TaintedObject(LocalID, "BSPrim.VehicleFloatParam", delegate()
+        {
+            BSDynamics vehicleActor = GetVehicleActor(true /* createIfNone */);
+            if (vehicleActor != null)
+            {
+                vehicleActor.ProcessFloatVehicleParam((Vehicle)param, value);
+                ActivateIfPhysical(false);
+            }
+        });
+    }
+    public override void VehicleVectorParam(int param, OMV.Vector3 value)
+    {
+        PhysScene.TaintedObject(LocalID, "BSPrim.VehicleVectorParam", delegate()
+        {
+            BSDynamics vehicleActor = GetVehicleActor(true /* createIfNone */);
+            if (vehicleActor != null)
+            {
+                vehicleActor.ProcessVectorVehicleParam((Vehicle)param, value);
+                ActivateIfPhysical(false);
+            }
+        });
+    }
+    public override void VehicleRotationParam(int param, OMV.Quaternion rotation)
+    {
+        PhysScene.TaintedObject(LocalID, "BSPrim.VehicleRotationParam", delegate()
+        {
+            BSDynamics vehicleActor = GetVehicleActor(true /* createIfNone */);
+            if (vehicleActor != null)
+            {
+                vehicleActor.ProcessRotationVehicleParam((Vehicle)param, rotation);
+                ActivateIfPhysical(false);
+            }
+        });
+    }
+    public override void VehicleFlags(int param, bool remove)
+    {
+        PhysScene.TaintedObject(LocalID, "BSPrim.VehicleFlags", delegate()
+        {
+            BSDynamics vehicleActor = GetVehicleActor(true /* createIfNone */);
+            if (vehicleActor != null)
+            {
+                vehicleActor.ProcessVehicleFlags(param, remove);
+            }
+        });
+    }
+
+    // Allows the detection of collisions with inherently non-physical prims. see llVolumeDetect for more
+    public override void SetVolumeDetect(int param) {
+        bool newValue = (param != 0);
+        if (_isVolumeDetect != newValue)
+        {
+            _isVolumeDetect = newValue;
+            PhysScene.TaintedObject(LocalID, "BSPrim.SetVolumeDetect", delegate()
+            {
+                // DetailLog("{0},setVolumeDetect,taint,volDetect={1}", LocalID, _isVolumeDetect);
+                SetObjectDynamic(true);
+            });
+        }
+        return;
+    }
+    public override bool IsVolumeDetect
+    {
+        get { return _isVolumeDetect; }
+    }
+    public override void SetMaterial(int material)
+    {
+        base.SetMaterial(material);
+        PhysScene.TaintedObject(LocalID, "BSPrim.SetMaterial", delegate()
+        {
+            UpdatePhysicalParameters();
+        });
+    }
+    public override float Friction
+    {
+        get { return base.Friction; }
+        set
+        {
+            if (base.Friction != value)
+            {
+                base.Friction = value;
+                PhysScene.TaintedObject(LocalID, "BSPrim.setFriction", delegate()
+                {
+                    UpdatePhysicalParameters();
+                });
+            }
+        }
+    }
+    public override float Restitution
+    {
+        get { return base.Restitution; }
+        set
+        {
+            if (base.Restitution != value)
+            {
+                base.Restitution = value;
+                PhysScene.TaintedObject(LocalID, "BSPrim.setRestitution", delegate()
+                {
+                    UpdatePhysicalParameters();
+                });
+            }
+        }
+    }
+    // The simulator/viewer keep density as 100kg/m3.
+    // Remember to use BSParam.DensityScaleFactor to create the physical density.
+    public override float Density
+    {
+        get { return base.Density; }
+        set
+        {
+            if (base.Density != value)
+            {
+                base.Density = value;
+                PhysScene.TaintedObject(LocalID, "BSPrim.setDensity", delegate()
+                {
+                    UpdatePhysicalParameters();
+                });
+            }
+        }
+    }
+    public override float GravModifier
+    {
+        get { return base.GravModifier; }
+        set
+        {
+            if (base.GravModifier != value)
+            {
+                base.GravModifier = value;
+                PhysScene.TaintedObject(LocalID, "BSPrim.setGravityModifier", delegate()
+                {
+                    UpdatePhysicalParameters();
+                });
+            }
+        }
+    }
+    public override OMV.Vector3 Velocity {
+        get { return RawVelocity; }
+        set {
+            RawVelocity = value;
+            PhysScene.TaintedObject(LocalID, "BSPrim.setVelocity", delegate()
+            {
+                // DetailLog("{0},BSPrim.SetVelocity,taint,vel={1}", LocalID, RawVelocity);
+                ForceVelocity = RawVelocity;
+            });
+        }
+    }
+    public override OMV.Vector3 ForceVelocity {
+        get { return RawVelocity; }
+        set {
+            PhysScene.AssertInTaintTime("BSPrim.ForceVelocity");
+
+            RawVelocity = Util.ClampV(value, BSParam.MaxLinearVelocity);
+            if (PhysBody.HasPhysicalBody)
+            {
+                DetailLog("{0},BSPrim.ForceVelocity,taint,vel={1}", LocalID, RawVelocity);
+                PhysScene.PE.SetLinearVelocity(PhysBody, RawVelocity);
+                ActivateIfPhysical(false);
+            }
+        }
+    }
+    public override OMV.Vector3 Torque {
+        get { return RawTorque; }
+        set {
+            RawTorque = value;
+            EnableActor(RawTorque != OMV.Vector3.Zero, SetTorqueActorName, delegate()
+            {
+                return new BSActorSetTorque(PhysScene, this, SetTorqueActorName);
+            });
+            DetailLog("{0},BSPrim.SetTorque,call,torque={1}", LocalID, RawTorque);
+
+            // Call update so actor Refresh() is called to start things off
+            PhysScene.TaintedObject(LocalID, "BSPrim.setTorque", delegate()
+            {
+                UpdatePhysicalParameters();
+            });
+        }
+    }
+    public override OMV.Vector3 Acceleration {
+        get { return _acceleration; }
+        set { _acceleration = value; }
+    }
+
+    public override OMV.Quaternion Orientation {
+        get {
+            return RawOrientation;
+        }
+        set {
+            if (RawOrientation == value)
+                return;
+            RawOrientation = value;
+
+            PhysScene.TaintedObject(LocalID, "BSPrim.setOrientation", delegate()
+            {
+                ForceOrientation = RawOrientation;
+            });
+        }
+    }
+    // Go directly to Bullet to get/set the value.
+    public override OMV.Quaternion ForceOrientation
+    {
+        get
+        {
+            RawOrientation = PhysScene.PE.GetOrientation(PhysBody);
+            return RawOrientation;
+        }
+        set
+        {
+            RawOrientation = value;
+            if (PhysBody.HasPhysicalBody)
+                PhysScene.PE.SetTranslation(PhysBody, RawPosition, RawOrientation);
+        }
+    }
+    public override int PhysicsActorType {
+        get { return _physicsActorType; }
+        set { _physicsActorType = value; }
+    }
+    public override bool IsPhysical {
+        get { return _isPhysical; }
+        set {
+            if (_isPhysical != value)
+            {
+                _isPhysical = value;
+                PhysScene.TaintedObject(LocalID, "BSPrim.setIsPhysical", delegate()
+                {
+                    DetailLog("{0},setIsPhysical,taint,isPhys={1}", LocalID, _isPhysical);
+                    SetObjectDynamic(true);
+                    // whether phys-to-static or static-to-phys, the object is not moving.
+                    ZeroMotion(true);
+
+                });
+            }
+        }
+    }
+
+    // An object is static (does not move) if selected or not physical
+    public override bool IsStatic
+    {
+        get { return _isSelected || !IsPhysical; }
+    }
+
+    // An object is solid if it's not phantom and if it's not doing VolumeDetect
+    public override bool IsSolid
+    {
+        get { return !IsPhantom && !_isVolumeDetect; }
+    }
+
+    // The object is moving and is actively being dynamic in the physical world
+    public override bool IsPhysicallyActive
+    {
+        get { return !_isSelected && IsPhysical; }
+    }
+
+    // Make gravity work if the object is physical and not selected
+    // Called at taint-time!!
+    private void SetObjectDynamic(bool forceRebuild)
+    {
+        // Recreate the physical object if necessary
+        CreateGeomAndObject(forceRebuild);
+    }
+
+    // Convert the simulator's physical properties into settings on BulletSim objects.
+    // There are four flags we're interested in:
+    //     IsStatic: Object does not move, otherwise the object has mass and moves
+    //     isSolid: other objects bounce off of this object
+    //     isVolumeDetect: other objects pass through but can generate collisions
+    //     collisionEvents: whether this object returns collision events
+    // NOTE: overloaded by BSPrimLinkable to also update linkset physical parameters.
+    public virtual void UpdatePhysicalParameters()
+    {
+        if (!PhysBody.HasPhysicalBody)
+        {
+            // This would only happen if updates are called for during initialization when the body is not set up yet.
+            // DetailLog("{0},BSPrim.UpdatePhysicalParameters,taint,calledWithNoPhysBody", LocalID);
+            return;
+        }
+
+        // Mangling all the physical properties requires the object not be in the physical world.
+        // This is a NOOP if the object is not in the world (BulletSim and Bullet ignore objects not found).
+        PhysScene.PE.RemoveObjectFromWorld(PhysScene.World, PhysBody);
+
+        // Set up the object physicalness (does gravity and collisions move this object)
+        MakeDynamic(IsStatic);
+
+        // Update vehicle specific parameters (after MakeDynamic() so can change physical parameters)
+        PhysicalActors.Refresh();
+
+        // Arrange for collision events if the simulator wants them
+        EnableCollisions(SubscribedEvents());
+
+        // Make solid or not (do things bounce off or pass through this object).
+        MakeSolid(IsSolid);
+
+        AddObjectToPhysicalWorld();
+
+        // Rebuild its shape
+        PhysScene.PE.UpdateSingleAabb(PhysScene.World, PhysBody);
+
+        DetailLog("{0},BSPrim.UpdatePhysicalParameters,taintExit,static={1},solid={2},mass={3},collide={4},cf={5:X},cType={6},body={7},shape={8}",
+                                    LocalID, IsStatic, IsSolid, Mass, SubscribedEvents(),
+                                    CurrentCollisionFlags, PhysBody.collisionType, PhysBody, PhysShape);
+    }
+
+    // "Making dynamic" means changing to and from static.
+    // When static, gravity does not effect the object and it is fixed in space.
+    // When dynamic, the object can fall and be pushed by others.
+    // This is independent of its 'solidness' which controls what passes through
+    //    this object and what interacts with it.
+    protected virtual void MakeDynamic(bool makeStatic)
+    {
+        if (makeStatic)
+        {
+            // Become a Bullet 'static' object type
+            CurrentCollisionFlags = PhysScene.PE.AddToCollisionFlags(PhysBody, CollisionFlags.CF_STATIC_OBJECT);
+            // Stop all movement
+            ZeroMotion(true);
+
+            // Set various physical properties so other object interact properly
+            PhysScene.PE.SetFriction(PhysBody, Friction);
+            PhysScene.PE.SetRestitution(PhysBody, Restitution);
+            PhysScene.PE.SetContactProcessingThreshold(PhysBody, BSParam.ContactProcessingThreshold);
+
+            // Mass is zero which disables a bunch of physics stuff in Bullet
+            UpdatePhysicalMassProperties(0f, false);
+            // Set collision detection parameters
+            if (BSParam.CcdMotionThreshold > 0f)
+            {
+                PhysScene.PE.SetCcdMotionThreshold(PhysBody, BSParam.CcdMotionThreshold);
+                PhysScene.PE.SetCcdSweptSphereRadius(PhysBody, BSParam.CcdSweptSphereRadius);
+            }
+
+            // The activation state is 'disabled' so Bullet will not try to act on it.
+            // PhysicsScene.PE.ForceActivationState(PhysBody, ActivationState.DISABLE_SIMULATION);
+            // Start it out sleeping and physical actions could wake it up.
+            PhysScene.PE.ForceActivationState(PhysBody, ActivationState.ISLAND_SLEEPING);
+
+            // This collides like a static object
+            PhysBody.collisionType = CollisionType.Static;
+        }
+        else
+        {
+            // Not a Bullet static object
+            CurrentCollisionFlags = PhysScene.PE.RemoveFromCollisionFlags(PhysBody, CollisionFlags.CF_STATIC_OBJECT);
+
+            // Set various physical properties so other object interact properly
+            PhysScene.PE.SetFriction(PhysBody, Friction);
+            PhysScene.PE.SetRestitution(PhysBody, Restitution);
+            // DetailLog("{0},BSPrim.MakeDynamic,frict={1},rest={2}", LocalID, Friction, Restitution);
+
+            // per http://www.bulletphysics.org/Bullet/phpBB3/viewtopic.php?t=3382
+            // Since this can be called multiple times, only zero forces when becoming physical
+            // PhysicsScene.PE.ClearAllForces(BSBody);
+
+            // For good measure, make sure the transform is set through to the motion state
+            ForcePosition = RawPosition;
+            ForceVelocity = RawVelocity;
+            ForceRotationalVelocity = _rotationalVelocity;
+
+            // A dynamic object has mass
+            UpdatePhysicalMassProperties(RawMass, false);
+
+            // Set collision detection parameters
+            if (BSParam.CcdMotionThreshold > 0f)
+            {
+                PhysScene.PE.SetCcdMotionThreshold(PhysBody, BSParam.CcdMotionThreshold);
+                PhysScene.PE.SetCcdSweptSphereRadius(PhysBody, BSParam.CcdSweptSphereRadius);
+            }
+
+            // Various values for simulation limits
+            PhysScene.PE.SetDamping(PhysBody, BSParam.LinearDamping, BSParam.AngularDamping);
+            PhysScene.PE.SetDeactivationTime(PhysBody, BSParam.DeactivationTime);
+            PhysScene.PE.SetSleepingThresholds(PhysBody, BSParam.LinearSleepingThreshold, BSParam.AngularSleepingThreshold);
+            PhysScene.PE.SetContactProcessingThreshold(PhysBody, BSParam.ContactProcessingThreshold);
+
+            // This collides like an object.
+            PhysBody.collisionType = CollisionType.Dynamic;
+
+            // Force activation of the object so Bullet will act on it.
+            // Must do the ForceActivationState2() to overcome the DISABLE_SIMULATION from static objects.
+            PhysScene.PE.ForceActivationState(PhysBody, ActivationState.ACTIVE_TAG);
+        }
+    }
+
+    // "Making solid" means that other object will not pass through this object.
+    // To make transparent, we create a Bullet ghost object.
+    // Note: This expects to be called from the UpdatePhysicalParameters() routine as
+    //     the functions after this one set up the state of a possibly newly created collision body.
+    private void MakeSolid(bool makeSolid)
+    {
+        CollisionObjectTypes bodyType = (CollisionObjectTypes)PhysScene.PE.GetBodyType(PhysBody);
+        if (makeSolid)
+        {
+            // Verify the previous code created the correct shape for this type of thing.
+            if ((bodyType & CollisionObjectTypes.CO_RIGID_BODY) == 0)
+            {
+                m_log.ErrorFormat("{0} MakeSolid: physical body of wrong type for solidity. id={1}, type={2}", LogHeader, LocalID, bodyType);
+            }
+            CurrentCollisionFlags = PhysScene.PE.RemoveFromCollisionFlags(PhysBody, CollisionFlags.CF_NO_CONTACT_RESPONSE);
+        }
+        else
+        {
+            if ((bodyType & CollisionObjectTypes.CO_GHOST_OBJECT) == 0)
+            {
+                m_log.ErrorFormat("{0} MakeSolid: physical body of wrong type for non-solidness. id={1}, type={2}", LogHeader, LocalID, bodyType);
+            }
+            CurrentCollisionFlags = PhysScene.PE.AddToCollisionFlags(PhysBody, CollisionFlags.CF_NO_CONTACT_RESPONSE);
+
+            // Change collision info from a static object to a ghosty collision object
+            PhysBody.collisionType = CollisionType.VolumeDetect;
+        }
+    }
+
+    // Turn on or off the flag controlling whether collision events are returned to the simulator.
+    private void EnableCollisions(bool wantsCollisionEvents)
+    {
+        if (wantsCollisionEvents)
+        {
+            CurrentCollisionFlags = PhysScene.PE.AddToCollisionFlags(PhysBody, CollisionFlags.BS_SUBSCRIBE_COLLISION_EVENTS);
+        }
+        else
+        {
+            CurrentCollisionFlags = PhysScene.PE.RemoveFromCollisionFlags(PhysBody, CollisionFlags.BS_SUBSCRIBE_COLLISION_EVENTS);
+        }
+    }
+
+    // Add me to the physical world.
+    // Object MUST NOT already be in the world.
+    // This routine exists because some assorted properties get mangled by adding to the world.
+    internal void AddObjectToPhysicalWorld()
+    {
+        if (PhysBody.HasPhysicalBody)
+        {
+            PhysScene.PE.AddObjectToWorld(PhysScene.World, PhysBody);
+        }
+        else
+        {
+            m_log.ErrorFormat("{0} Attempt to add physical object without body. id={1}", LogHeader, LocalID);
+            DetailLog("{0},BSPrim.AddObjectToPhysicalWorld,addObjectWithoutBody,cType={1}", LocalID, PhysBody.collisionType);
+        }
+    }
+
+    // prims don't fly
+    public override bool Flying {
+        get { return _flying; }
+        set {
+            _flying = value;
+        }
+    }
+    public override bool SetAlwaysRun {
+        get { return _setAlwaysRun; }
+        set { _setAlwaysRun = value; }
+    }
+    public override bool ThrottleUpdates {
+        get { return _throttleUpdates; }
+        set { _throttleUpdates = value; }
+    }
+    public bool IsPhantom {
+        get {
+            // SceneObjectPart removes phantom objects from the physics scene
+            // so, although we could implement touching and such, we never
+            // are invoked as a phantom object
+            return false;
+        }
+    }
+    public override bool FloatOnWater {
+        set {
+            _floatOnWater = value;
+            PhysScene.TaintedObject(LocalID, "BSPrim.setFloatOnWater", delegate()
+            {
+                if (_floatOnWater)
+                    CurrentCollisionFlags = PhysScene.PE.AddToCollisionFlags(PhysBody, CollisionFlags.BS_FLOATS_ON_WATER);
+                else
+                    CurrentCollisionFlags = PhysScene.PE.RemoveFromCollisionFlags(PhysBody, CollisionFlags.BS_FLOATS_ON_WATER);
+            });
+        }
+    }
+    public override OMV.Vector3 RotationalVelocity {
+        get {
+            return _rotationalVelocity;
+        }
+        set {
+            _rotationalVelocity = value;
+            Util.ClampV(_rotationalVelocity, BSParam.MaxAngularVelocity);
+            // m_log.DebugFormat("{0}: RotationalVelocity={1}", LogHeader, _rotationalVelocity);
+            PhysScene.TaintedObject(LocalID, "BSPrim.setRotationalVelocity", delegate()
+            {
+                ForceRotationalVelocity = _rotationalVelocity;
+            });
+        }
+    }
+    public override OMV.Vector3 ForceRotationalVelocity {
+        get {
+            return _rotationalVelocity;
+        }
+        set {
+            _rotationalVelocity = Util.ClampV(value, BSParam.MaxAngularVelocity);
+            if (PhysBody.HasPhysicalBody)
+            {
+                DetailLog("{0},BSPrim.ForceRotationalVel,taint,rotvel={1}", LocalID, _rotationalVelocity);
+                PhysScene.PE.SetAngularVelocity(PhysBody, _rotationalVelocity);
+                // PhysicsScene.PE.SetInterpolationAngularVelocity(PhysBody, _rotationalVelocity);
+                ActivateIfPhysical(false);
+            }
+        }
+    }
+    public override bool Kinematic {
+        get { return _kinematic; }
+        set { _kinematic = value;
+            // m_log.DebugFormat("{0}: Kinematic={1}", LogHeader, _kinematic);
+        }
+    }
+    public override float Buoyancy {
+        get { return _buoyancy; }
+        set {
+            _buoyancy = value;
+            PhysScene.TaintedObject(LocalID, "BSPrim.setBuoyancy", delegate()
+            {
+                ForceBuoyancy = _buoyancy;
+            });
+        }
+    }
+    public override float ForceBuoyancy {
+        get { return _buoyancy; }
+        set {
+            _buoyancy = value;
+            // DetailLog("{0},BSPrim.setForceBuoyancy,taint,buoy={1}", LocalID, _buoyancy);
+            // Force the recalculation of the various inertia,etc variables in the object
+            UpdatePhysicalMassProperties(RawMass, true);
+            DetailLog("{0},BSPrim.ForceBuoyancy,buoy={1},mass={2},grav={3}", LocalID, _buoyancy, RawMass, Gravity);
+            ActivateIfPhysical(false);
+        }
+    }
+
+    public override bool PIDActive 
+    {
+        get
+        {
+            return MoveToTargetActive;
+        }
+
+        set 
+        {
+            MoveToTargetActive = value;
+
+            EnableActor(MoveToTargetActive, MoveToTargetActorName, delegate()
+            {
+                return new BSActorMoveToTarget(PhysScene, this, MoveToTargetActorName);
+            });
+
+            // Call update so actor Refresh() is called to start things off
+            PhysScene.TaintedObject(LocalID, "BSPrim.PIDActive", delegate()
+            {
+                UpdatePhysicalParameters();
+            });
+        }
+    }
+
+    public override OMV.Vector3 PIDTarget
+    {
+        set
+        {
+            base.PIDTarget = value;
+            BSActor actor;
+            if (PhysicalActors.TryGetActor(MoveToTargetActorName, out actor))
+            {
+                // if the actor exists, tell it to refresh its values.
+                actor.Refresh();
+            }
+            
+        }
+    }
+    // Used for llSetHoverHeight and maybe vehicle height
+    // Hover Height will override MoveTo target's Z
+    public override bool PIDHoverActive {
+        set {
+            base.HoverActive = value;
+            EnableActor(HoverActive, HoverActorName, delegate()
+            {
+                return new BSActorHover(PhysScene, this, HoverActorName);
+            });
+
+            // Call update so actor Refresh() is called to start things off
+            PhysScene.TaintedObject(LocalID, "BSPrim.PIDHoverActive", delegate()
+            {
+                UpdatePhysicalParameters();
+            });
+        }
+    }
+
+    public override void AddForce(OMV.Vector3 force, bool pushforce) {
+        // Per documentation, max force is limited.
+        OMV.Vector3 addForce = Util.ClampV(force, BSParam.MaxAddForceMagnitude);
+
+        // Since this force is being applied in only one step, make this a force per second.
+        addForce /= PhysScene.LastTimeStep;
+        AddForce(addForce, pushforce, false /* inTaintTime */);
+    }
+
+    // Applying a force just adds this to the total force on the object.
+    // This added force will only last the next simulation tick.
+    public override void AddForce(OMV.Vector3 force, bool pushforce, bool inTaintTime) {
+        // for an object, doesn't matter if force is a pushforce or not
+        if (IsPhysicallyActive)
+        {
+            if (force.IsFinite())
+            {
+                // DetailLog("{0},BSPrim.addForce,call,force={1}", LocalID, addForce);
+
+                OMV.Vector3 addForce = force;
+                PhysScene.TaintedObject(inTaintTime, LocalID, "BSPrim.AddForce", delegate()
+                {
+                    // Bullet adds this central force to the total force for this tick.
+                    // Deep down in Bullet:
+                    //      linearVelocity += totalForce / mass * timeStep;
+                    DetailLog("{0},BSPrim.addForce,taint,force={1}", LocalID, addForce);
+                    if (PhysBody.HasPhysicalBody)
+                    {
+                        PhysScene.PE.ApplyCentralForce(PhysBody, addForce);
+                        ActivateIfPhysical(false);
+                    }
+                });
+            }
+            else
+            {
+                m_log.WarnFormat("{0}: AddForce: Got a NaN force applied to a prim. LocalID={1}", LogHeader, LocalID);
+                return;
+            }
+        }
+    }
+
+    public void AddForceImpulse(OMV.Vector3 impulse, bool pushforce, bool inTaintTime) {
+        // for an object, doesn't matter if force is a pushforce or not
+        if (!IsPhysicallyActive)
+        {
+            if (impulse.IsFinite())
+            {
+                OMV.Vector3 addImpulse = Util.ClampV(impulse, BSParam.MaxAddForceMagnitude);
+                // DetailLog("{0},BSPrim.addForceImpulse,call,impulse={1}", LocalID, impulse);
+
+                PhysScene.TaintedObject(inTaintTime, LocalID, "BSPrim.AddImpulse", delegate()
+                {
+                    // Bullet adds this impulse immediately to the velocity
+                    DetailLog("{0},BSPrim.addForceImpulse,taint,impulseforce={1}", LocalID, addImpulse);
+                    if (PhysBody.HasPhysicalBody)
+                    {
+                        PhysScene.PE.ApplyCentralImpulse(PhysBody, addImpulse);
+                        ActivateIfPhysical(false);
+                    }
+                });
+            }
+            else
+            {
+                m_log.WarnFormat("{0}: AddForceImpulse: Got a NaN impulse applied to a prim. LocalID={1}", LogHeader, LocalID);
+                return;
+            }
+        }
+    }
+
+    // BSPhysObject.AddAngularForce()
+    public override void AddAngularForce(OMV.Vector3 force, bool pushforce, bool inTaintTime)
+    {
+        if (force.IsFinite())
+        {
+            OMV.Vector3 angForce = force;
+            PhysScene.TaintedObject(inTaintTime, LocalID, "BSPrim.AddAngularForce", delegate()
+            {
+                if (PhysBody.HasPhysicalBody)
+                {
+                    DetailLog("{0},BSPrim.AddAngularForce,taint,angForce={1}", LocalID, angForce);
+                    PhysScene.PE.ApplyTorque(PhysBody, angForce);
+                    ActivateIfPhysical(false);
+                }
+            });
+        }
+        else
+        {
+            m_log.WarnFormat("{0}: Got a NaN force applied to a prim. LocalID={1}", LogHeader, LocalID);
+            return;
+        }
+    }
+
+    // A torque impulse.
+    // ApplyTorqueImpulse adds torque directly to the angularVelocity.
+    // AddAngularForce accumulates the force and applied it to the angular velocity all at once.
+    // Computed as: angularVelocity += impulse * inertia;
+    public void ApplyTorqueImpulse(OMV.Vector3 impulse, bool inTaintTime)
+    {
+        OMV.Vector3 applyImpulse = impulse;
+        PhysScene.TaintedObject(inTaintTime, LocalID, "BSPrim.ApplyTorqueImpulse", delegate()
+        {
+            if (PhysBody.HasPhysicalBody)
+            {
+                PhysScene.PE.ApplyTorqueImpulse(PhysBody, applyImpulse);
+                ActivateIfPhysical(false);
+            }
+        });
+    }
+
+    public override void SetMomentum(OMV.Vector3 momentum) {
+        // DetailLog("{0},BSPrim.SetMomentum,call,mom={1}", LocalID, momentum);
+    }
+    #region Mass Calculation
+
+    private float CalculateMass()
+    {
+        float volume = _size.X * _size.Y * _size.Z; // default
+        float tmp;
+
+        float returnMass = 0;
+        float hollowAmount = (float)BaseShape.ProfileHollow * 2.0e-5f;
+        float hollowVolume = hollowAmount * hollowAmount;
+
+        switch (BaseShape.ProfileShape)
+        {
+            case ProfileShape.Square:
+                // default box
+
+                if (BaseShape.PathCurve == (byte)Extrusion.Straight)
+                    {
+                    if (hollowAmount > 0.0)
+                        {
+                        switch (BaseShape.HollowShape)
+                            {
+                            case HollowShape.Square:
+                            case HollowShape.Same:
+                                break;
+
+                            case HollowShape.Circle:
+
+                                hollowVolume *= 0.78539816339f;
+                                break;
+
+                            case HollowShape.Triangle:
+
+                                hollowVolume *= (0.5f * .5f);
+                                break;
+
+                            default:
+                                hollowVolume = 0;
+                                break;
+                            }
+                        volume *= (1.0f - hollowVolume);
+                        }
+                    }
+
+                else if (BaseShape.PathCurve == (byte)Extrusion.Curve1)
+                    {
+                    //a tube
+
+                    volume *= 0.78539816339e-2f * (float)(200 - BaseShape.PathScaleX);
+                    tmp= 1.0f -2.0e-2f * (float)(200 - BaseShape.PathScaleY);
+                    volume -= volume*tmp*tmp;
+
+                    if (hollowAmount > 0.0)
+                        {
+                        hollowVolume *= hollowAmount;
+
+                        switch (BaseShape.HollowShape)
+                            {
+                            case HollowShape.Square:
+                            case HollowShape.Same:
+                                break;
+
+                            case HollowShape.Circle:
+                                hollowVolume *= 0.78539816339f;;
+                                break;
+
+                            case HollowShape.Triangle:
+                                hollowVolume *= 0.5f * 0.5f;
+                                break;
+                            default:
+                                hollowVolume = 0;
+                                break;
+                            }
+                        volume *= (1.0f - hollowVolume);
+                        }
+                    }
+
+                break;
+
+            case ProfileShape.Circle:
+
+                if (BaseShape.PathCurve == (byte)Extrusion.Straight)
+                    {
+                    volume *= 0.78539816339f; // elipse base
+
+                    if (hollowAmount > 0.0)
+                        {
+                        switch (BaseShape.HollowShape)
+                            {
+                            case HollowShape.Same:
+                            case HollowShape.Circle:
+                                break;
+
+                            case HollowShape.Square:
+                                hollowVolume *= 0.5f * 2.5984480504799f;
+                                break;
+
+                            case HollowShape.Triangle:
+                                hollowVolume *= .5f * 1.27323954473516f;
+                                break;
+
+                            default:
+                                hollowVolume = 0;
+                                break;
+                            }
+                        volume *= (1.0f - hollowVolume);
+                        }
+                    }
+
+                else if (BaseShape.PathCurve == (byte)Extrusion.Curve1)
+                    {
+                    volume *= 0.61685027506808491367715568749226e-2f * (float)(200 - BaseShape.PathScaleX);
+                    tmp = 1.0f - .02f * (float)(200 - BaseShape.PathScaleY);
+                    volume *= (1.0f - tmp * tmp);
+
+                    if (hollowAmount > 0.0)
+                        {
+
+                        // calculate the hollow volume by it's shape compared to the prim shape
+                        hollowVolume *= hollowAmount;
+
+                        switch (BaseShape.HollowShape)
+                            {
+                            case HollowShape.Same:
+                            case HollowShape.Circle:
+                                break;
+
+                            case HollowShape.Square:
+                                hollowVolume *= 0.5f * 2.5984480504799f;
+                                break;
+
+                            case HollowShape.Triangle:
+                                hollowVolume *= .5f * 1.27323954473516f;
+                                break;
+
+                            default:
+                                hollowVolume = 0;
+                                break;
+                            }
+                        volume *= (1.0f - hollowVolume);
+                        }
+                    }
+                break;
+
+            case ProfileShape.HalfCircle:
+                if (BaseShape.PathCurve == (byte)Extrusion.Curve1)
+                {
+                volume *= 0.52359877559829887307710723054658f;
+                }
+                break;
+
+            case ProfileShape.EquilateralTriangle:
+
+                if (BaseShape.PathCurve == (byte)Extrusion.Straight)
+                    {
+                    volume *= 0.32475953f;
+
+                    if (hollowAmount > 0.0)
+                        {
+
+                        // calculate the hollow volume by it's shape compared to the prim shape
+                        switch (BaseShape.HollowShape)
+                            {
+                            case HollowShape.Same:
+                            case HollowShape.Triangle:
+                                hollowVolume *= .25f;
+                                break;
+
+                            case HollowShape.Square:
+                                hollowVolume *= 0.499849f * 3.07920140172638f;
+                                break;
+
+                            case HollowShape.Circle:
+                                // Hollow shape is a perfect cyllinder in respect to the cube's scale
+                                // Cyllinder hollow volume calculation
+
+                                hollowVolume *= 0.1963495f * 3.07920140172638f;
+                                break;
+
+                            default:
+                                hollowVolume = 0;
+                                break;
+                            }
+                        volume *= (1.0f - hollowVolume);
+                        }
+                    }
+                else if (BaseShape.PathCurve == (byte)Extrusion.Curve1)
+                    {
+                    volume *= 0.32475953f;
+                    volume *= 0.01f * (float)(200 - BaseShape.PathScaleX);
+                    tmp = 1.0f - .02f * (float)(200 - BaseShape.PathScaleY);
+                    volume *= (1.0f - tmp * tmp);
+
+                    if (hollowAmount > 0.0)
+                        {
+
+                        hollowVolume *= hollowAmount;
+
+                        switch (BaseShape.HollowShape)
+                            {
+                            case HollowShape.Same:
+                            case HollowShape.Triangle:
+                                hollowVolume *= .25f;
+                                break;
+
+                            case HollowShape.Square:
+                                hollowVolume *= 0.499849f * 3.07920140172638f;
+                                break;
+
+                            case HollowShape.Circle:
+
+                                hollowVolume *= 0.1963495f * 3.07920140172638f;
+                                break;
+
+                            default:
+                                hollowVolume = 0;
+                                break;
+                            }
+                        volume *= (1.0f - hollowVolume);
+                        }
+                    }
+                    break;
+
+            default:
+                break;
+            }
+
+
+
+        float taperX1;
+        float taperY1;
+        float taperX;
+        float taperY;
+        float pathBegin;
+        float pathEnd;
+        float profileBegin;
+        float profileEnd;
+
+        if (BaseShape.PathCurve == (byte)Extrusion.Straight || BaseShape.PathCurve == (byte)Extrusion.Flexible)
+            {
+            taperX1 = BaseShape.PathScaleX * 0.01f;
+            if (taperX1 > 1.0f)
+                taperX1 = 2.0f - taperX1;
+            taperX = 1.0f - taperX1;
+
+            taperY1 = BaseShape.PathScaleY * 0.01f;
+            if (taperY1 > 1.0f)
+                taperY1 = 2.0f - taperY1;
+            taperY = 1.0f - taperY1;
+            }
+        else
+            {
+            taperX = BaseShape.PathTaperX * 0.01f;
+            if (taperX < 0.0f)
+                taperX = -taperX;
+            taperX1 = 1.0f - taperX;
+
+            taperY = BaseShape.PathTaperY * 0.01f;
+            if (taperY < 0.0f)
+                taperY = -taperY;
+            taperY1 = 1.0f - taperY;
+
+            }
+
+
+        volume *= (taperX1 * taperY1 + 0.5f * (taperX1 * taperY + taperX * taperY1) + 0.3333333333f * taperX * taperY);
+
+        pathBegin = (float)BaseShape.PathBegin * 2.0e-5f;
+        pathEnd = 1.0f - (float)BaseShape.PathEnd * 2.0e-5f;
+        volume *= (pathEnd - pathBegin);
+
+        // this is crude aproximation
+        profileBegin = (float)BaseShape.ProfileBegin * 2.0e-5f;
+        profileEnd = 1.0f - (float)BaseShape.ProfileEnd * 2.0e-5f;
+        volume *= (profileEnd - profileBegin);
+
+        returnMass = Density * BSParam.DensityScaleFactor * volume;
+
+        returnMass = Util.Clamp(returnMass, BSParam.MinimumObjectMass, BSParam.MaximumObjectMass);
+        // DetailLog("{0},BSPrim.CalculateMass,den={1},vol={2},mass={3}", LocalID, Density, volume, returnMass);
+        DetailLog("{0},BSPrim.CalculateMass,den={1},vol={2},mass={3},pathB={4},pathE={5},profB={6},profE={7},siz={8}",
+                            LocalID, Density, volume, returnMass, pathBegin, pathEnd, profileBegin, profileEnd, _size);
+
+        return returnMass;
+    }// end CalculateMass
+    #endregion Mass Calculation
+
+    // Rebuild the geometry and object.
+    // This is called when the shape changes so we need to recreate the mesh/hull.
+    // Called at taint-time!!!
+    public void CreateGeomAndObject(bool forceRebuild)
+    {
+        // Create the correct physical representation for this type of object.
+        // Updates base.PhysBody and base.PhysShape with the new information.
+        // Ignore 'forceRebuild'. 'GetBodyAndShape' makes the right choices and changes of necessary.
+        PhysScene.Shapes.GetBodyAndShape(false /*forceRebuild */, PhysScene.World, this, delegate(BulletBody pBody, BulletShape pShape)
+        {
+            // Called if the current prim body is about to be destroyed.
+            // Remove all the physical dependencies on the old body.
+            // (Maybe someday make the changing of BSShape an event to be subscribed to by BSLinkset, ...)
+            // Note: this virtual function is overloaded by BSPrimLinkable to remove linkset constraints.
+            RemoveDependencies();
+        });
+
+        // Make sure the properties are set on the new object
+        UpdatePhysicalParameters();
+        return;
+    }
+
+    // Called at taint-time
+    protected virtual void RemoveDependencies()
+    {
+        PhysicalActors.RemoveDependencies();
+    }
+
+    #region Extension
+    public override object Extension(string pFunct, params object[] pParams)
+    {
+        DetailLog("{0} BSPrim.Extension,op={1}", LocalID, pFunct);
+        object ret = null;
+        switch (pFunct)
+        {
+            case ExtendedPhysics.PhysFunctAxisLockLimits:
+                ret = SetAxisLockLimitsExtension(pParams);
+                break;
+            default:
+                ret = base.Extension(pFunct, pParams);
+                break;
+        }
+        return ret;
+    }
+
+    private void InitializeAxisActor()
+    {
+        EnableActor(LockedAngularAxis != LockedAxisFree || LockedLinearAxis != LockedAxisFree,
+                                    LockedAxisActorName, delegate()
+        {
+            return new BSActorLockAxis(PhysScene, this, LockedAxisActorName);
+        });
+
+        // Update parameters so the new actor's Refresh() action is called at the right time.
+        PhysScene.TaintedObject(LocalID, "BSPrim.LockAxis", delegate()
+        {
+            UpdatePhysicalParameters();
+        });
+    }
+
+    // Passed an array of an array of parameters, set the axis locking.
+    // This expects an int (PHYS_AXIS_*) followed by none or two limit floats
+    //    followed by another int and floats, etc.
+    private object SetAxisLockLimitsExtension(object[] pParams)
+    {
+        DetailLog("{0} SetAxisLockLimitsExtension. parmlen={1}", LocalID, pParams.GetLength(0));
+        object ret = null;
+        try
+        {
+            if (pParams.GetLength(0) > 1)
+            {
+                int index = 2;
+                while (index < pParams.GetLength(0))
+                {
+                    var funct = pParams[index];
+                    DetailLog("{0} SetAxisLockLimitsExtension. op={1}, index={2}", LocalID, funct, index);
+                    if (funct is Int32 || funct is Int64)
+                    {
+                        switch ((int)funct)
+                        {
+                            // Those that take no parameters
+                            case ExtendedPhysics.PHYS_AXIS_LOCK_LINEAR:
+                            case ExtendedPhysics.PHYS_AXIS_LOCK_LINEAR_X:
+                            case ExtendedPhysics.PHYS_AXIS_LOCK_LINEAR_Y:
+                            case ExtendedPhysics.PHYS_AXIS_LOCK_LINEAR_Z:
+                            case ExtendedPhysics.PHYS_AXIS_LOCK_ANGULAR:
+                            case ExtendedPhysics.PHYS_AXIS_LOCK_ANGULAR_X:
+                            case ExtendedPhysics.PHYS_AXIS_LOCK_ANGULAR_Y:
+                            case ExtendedPhysics.PHYS_AXIS_LOCK_ANGULAR_Z:
+                            case ExtendedPhysics.PHYS_AXIS_UNLOCK_LINEAR:
+                            case ExtendedPhysics.PHYS_AXIS_UNLOCK_LINEAR_X:
+                            case ExtendedPhysics.PHYS_AXIS_UNLOCK_LINEAR_Y:
+                            case ExtendedPhysics.PHYS_AXIS_UNLOCK_LINEAR_Z:
+                            case ExtendedPhysics.PHYS_AXIS_UNLOCK_ANGULAR:
+                            case ExtendedPhysics.PHYS_AXIS_UNLOCK_ANGULAR_X:
+                            case ExtendedPhysics.PHYS_AXIS_UNLOCK_ANGULAR_Y:
+                            case ExtendedPhysics.PHYS_AXIS_UNLOCK_ANGULAR_Z:
+                            case ExtendedPhysics.PHYS_AXIS_UNLOCK:
+                                ApplyAxisLimits((int)funct, 0f, 0f);
+                                index += 1;
+                                break;
+                            // Those that take two parameters (the limits)
+                            case ExtendedPhysics.PHYS_AXIS_LIMIT_LINEAR_X:
+                            case ExtendedPhysics.PHYS_AXIS_LIMIT_LINEAR_Y:
+                            case ExtendedPhysics.PHYS_AXIS_LIMIT_LINEAR_Z:
+                            case ExtendedPhysics.PHYS_AXIS_LIMIT_ANGULAR_X:
+                            case ExtendedPhysics.PHYS_AXIS_LIMIT_ANGULAR_Y:
+                            case ExtendedPhysics.PHYS_AXIS_LIMIT_ANGULAR_Z:
+                                ApplyAxisLimits((int)funct, (float)pParams[index + 1], (float)pParams[index + 2]);
+                                index += 3;
+                                break;
+                            default:
+                                m_log.WarnFormat("{0} SetSxisLockLimitsExtension. Unknown op={1}", LogHeader, funct);
+                                index += 1;
+                                break;
+                        }
+                    }
+                }
+                InitializeAxisActor();
+                ret = (object)index;
+            }
+        }
+        catch (Exception e)
+        {
+            m_log.WarnFormat("{0} SetSxisLockLimitsExtension exception in object {1}: {2}", LogHeader, this.Name, e);
+            ret = null;
+        }
+        return ret;    // not implemented yet
+    }
+
+        // Set the locking parameters.
+        // If an axis is locked, the limits for the axis are set to zero,
+        // If the axis is being constrained, the high and low value are passed and set.
+        // When done here, LockedXXXAxis flags are set and LockedXXXAxixLow/High are set to the range.
+    protected void ApplyAxisLimits(int funct, float low, float high)
+    {
+        DetailLog("{0} ApplyAxisLimits. op={1}, low={2}, high={3}", LocalID, funct, low, high);
+        float linearMax = 23000f;
+        float angularMax = (float)Math.PI;
+
+        switch (funct)
+        {
+            case ExtendedPhysics.PHYS_AXIS_LOCK_LINEAR:
+                this.LockedLinearAxis = new OMV.Vector3(LockedAxis, LockedAxis, LockedAxis);
+                this.LockedLinearAxisLow = OMV.Vector3.Zero;
+                this.LockedLinearAxisHigh = OMV.Vector3.Zero;
+                break;
+            case ExtendedPhysics.PHYS_AXIS_LOCK_LINEAR_X:
+                this.LockedLinearAxis.X = LockedAxis;
+                this.LockedLinearAxisLow.X = 0f;
+                this.LockedLinearAxisHigh.X = 0f;
+                break;
+            case ExtendedPhysics.PHYS_AXIS_LIMIT_LINEAR_X:
+                this.LockedLinearAxis.X = LockedAxis;
+                this.LockedLinearAxisLow.X = Util.Clip(low, -linearMax, linearMax);
+                this.LockedLinearAxisHigh.X = Util.Clip(high, -linearMax, linearMax);
+                break;
+            case ExtendedPhysics.PHYS_AXIS_LOCK_LINEAR_Y:
+                this.LockedLinearAxis.Y = LockedAxis;
+                this.LockedLinearAxisLow.Y = 0f;
+                this.LockedLinearAxisHigh.Y = 0f;
+                break;
+            case ExtendedPhysics.PHYS_AXIS_LIMIT_LINEAR_Y:
+                this.LockedLinearAxis.Y = LockedAxis;
+                this.LockedLinearAxisLow.Y = Util.Clip(low, -linearMax, linearMax);
+                this.LockedLinearAxisHigh.Y = Util.Clip(high, -linearMax, linearMax);
+                break;
+            case ExtendedPhysics.PHYS_AXIS_LOCK_LINEAR_Z:
+                this.LockedLinearAxis.Z = LockedAxis;
+                this.LockedLinearAxisLow.Z = 0f;
+                this.LockedLinearAxisHigh.Z = 0f;
+                break;
+            case ExtendedPhysics.PHYS_AXIS_LIMIT_LINEAR_Z:
+                this.LockedLinearAxis.Z = LockedAxis;
+                this.LockedLinearAxisLow.Z = Util.Clip(low, -linearMax, linearMax);
+                this.LockedLinearAxisHigh.Z = Util.Clip(high, -linearMax, linearMax);
+                break;
+            case ExtendedPhysics.PHYS_AXIS_LOCK_ANGULAR:
+                this.LockedAngularAxis = new OMV.Vector3(LockedAxis, LockedAxis, LockedAxis);
+                this.LockedAngularAxisLow = OMV.Vector3.Zero;
+                this.LockedAngularAxisHigh = OMV.Vector3.Zero;
+                break;
+            case ExtendedPhysics.PHYS_AXIS_LOCK_ANGULAR_X:
+                this.LockedAngularAxis.X = LockedAxis;
+                this.LockedAngularAxisLow.X = 0;
+                this.LockedAngularAxisHigh.X = 0;
+                break;
+            case ExtendedPhysics.PHYS_AXIS_LIMIT_ANGULAR_X:
+                this.LockedAngularAxis.X = LockedAxis;
+                this.LockedAngularAxisLow.X = Util.Clip(low, -angularMax, angularMax);
+                this.LockedAngularAxisHigh.X = Util.Clip(high, -angularMax, angularMax);
+                break;
+            case ExtendedPhysics.PHYS_AXIS_LOCK_ANGULAR_Y:
+                this.LockedAngularAxis.Y = LockedAxis;
+                this.LockedAngularAxisLow.Y = 0;
+                this.LockedAngularAxisHigh.Y = 0;
+                break;
+            case ExtendedPhysics.PHYS_AXIS_LIMIT_ANGULAR_Y:
+                this.LockedAngularAxis.Y = LockedAxis;
+                this.LockedAngularAxisLow.Y = Util.Clip(low, -angularMax, angularMax);
+                this.LockedAngularAxisHigh.Y = Util.Clip(high, -angularMax, angularMax);
+                break;
+            case ExtendedPhysics.PHYS_AXIS_LOCK_ANGULAR_Z:
+                this.LockedAngularAxis.Z = LockedAxis;
+                this.LockedAngularAxisLow.Z = 0;
+                this.LockedAngularAxisHigh.Z = 0;
+                break;
+            case ExtendedPhysics.PHYS_AXIS_LIMIT_ANGULAR_Z:
+                this.LockedAngularAxis.Z = LockedAxis;
+                this.LockedAngularAxisLow.Z = Util.Clip(low, -angularMax, angularMax);
+                this.LockedAngularAxisHigh.Z = Util.Clip(high, -angularMax, angularMax);
+                break;
+            case ExtendedPhysics.PHYS_AXIS_UNLOCK_LINEAR:
+                this.LockedLinearAxis = LockedAxisFree;
+                this.LockedLinearAxisLow = new OMV.Vector3(-linearMax, -linearMax, -linearMax);
+                this.LockedLinearAxisHigh = new OMV.Vector3(linearMax, linearMax, linearMax);
+                break;
+            case ExtendedPhysics.PHYS_AXIS_UNLOCK_LINEAR_X:
+                this.LockedLinearAxis.X = FreeAxis;
+                this.LockedLinearAxisLow.X = -linearMax;
+                this.LockedLinearAxisHigh.X = linearMax;
+                break;
+            case ExtendedPhysics.PHYS_AXIS_UNLOCK_LINEAR_Y:
+                this.LockedLinearAxis.Y = FreeAxis;
+                this.LockedLinearAxisLow.Y = -linearMax;
+                this.LockedLinearAxisHigh.Y = linearMax;
+                break;
+            case ExtendedPhysics.PHYS_AXIS_UNLOCK_LINEAR_Z:
+                this.LockedLinearAxis.Z = FreeAxis;
+                this.LockedLinearAxisLow.Z = -linearMax;
+                this.LockedLinearAxisHigh.Z = linearMax;
+                break;
+            case ExtendedPhysics.PHYS_AXIS_UNLOCK_ANGULAR:
+                this.LockedAngularAxis = LockedAxisFree;
+                this.LockedAngularAxisLow = new OMV.Vector3(-angularMax, -angularMax, -angularMax);
+                this.LockedAngularAxisHigh = new OMV.Vector3(angularMax, angularMax, angularMax);
+                break;
+            case ExtendedPhysics.PHYS_AXIS_UNLOCK_ANGULAR_X:
+                this.LockedAngularAxis.X = FreeAxis;
+                this.LockedAngularAxisLow.X = -angularMax;
+                this.LockedAngularAxisHigh.X = angularMax;
+                break;
+            case ExtendedPhysics.PHYS_AXIS_UNLOCK_ANGULAR_Y:
+                this.LockedAngularAxis.Y = FreeAxis;
+                this.LockedAngularAxisLow.Y = -angularMax;
+                this.LockedAngularAxisHigh.Y = angularMax;
+                break;
+            case ExtendedPhysics.PHYS_AXIS_UNLOCK_ANGULAR_Z:
+                this.LockedAngularAxis.Z = FreeAxis;
+                this.LockedAngularAxisLow.Z = -angularMax;
+                this.LockedAngularAxisHigh.Z = angularMax;
+                break;
+            case ExtendedPhysics.PHYS_AXIS_UNLOCK:
+                ApplyAxisLimits(ExtendedPhysics.PHYS_AXIS_UNLOCK_LINEAR, 0f, 0f);
+                ApplyAxisLimits(ExtendedPhysics.PHYS_AXIS_UNLOCK_ANGULAR, 0f, 0f);
+                break;
+            default:
+                break;
+        }
+        return;
+    }
+    #endregion  // Extension
+
+    // The physics engine says that properties have updated. Update same and inform
+    // the world that things have changed.
+    // NOTE: BSPrim.UpdateProperties is overloaded by BSPrimLinkable which modifies updates from root and children prims.
+    // NOTE: BSPrim.UpdateProperties is overloaded by BSPrimDisplaced which handles mapping physical position to simulator position.
+    public override void UpdateProperties(EntityProperties entprop)
+    {
+        // Let anyone (like the actors) modify the updated properties before they are pushed into the object and the simulator.
+        TriggerPreUpdatePropertyAction(ref entprop);
+
+        // DetailLog("{0},BSPrim.UpdateProperties,entry,entprop={1}", LocalID, entprop);   // DEBUG DEBUG
+
+        // Assign directly to the local variables so the normal set actions do not happen
+        RawPosition = entprop.Position;
+        RawOrientation = entprop.Rotation;
+        // DEBUG DEBUG DEBUG -- smooth velocity changes a bit. The simulator seems to be
+        //    very sensitive to velocity changes.
+        if (entprop.Velocity == OMV.Vector3.Zero || !entprop.Velocity.ApproxEquals(RawVelocity, BSParam.UpdateVelocityChangeThreshold))
+            RawVelocity = entprop.Velocity;
+        _acceleration = entprop.Acceleration;
+        _rotationalVelocity = entprop.RotationalVelocity;
+
+        // DetailLog("{0},BSPrim.UpdateProperties,afterAssign,entprop={1}", LocalID, entprop);   // DEBUG DEBUG
+
+        // The sanity check can change the velocity and/or position.
+        if (PositionSanityCheck(true /* inTaintTime */ ))
+        {
+            entprop.Position = RawPosition;
+            entprop.Velocity = RawVelocity;
+            entprop.RotationalVelocity = _rotationalVelocity;
+            entprop.Acceleration = _acceleration;
+        }
+
+        OMV.Vector3 direction = OMV.Vector3.UnitX * RawOrientation;   // DEBUG DEBUG DEBUG
+        DetailLog("{0},BSPrim.UpdateProperties,call,entProp={1},dir={2}", LocalID, entprop, direction);
+
+        // remember the current and last set values
+        LastEntityProperties = CurrentEntityProperties;
+        CurrentEntityProperties = entprop;
+
+        PhysScene.PostUpdate(this);
+    }
+}
+}
diff --git a/OpenSim/Region/PhysicsModules/BulletS/BSPrimDisplaced.cs b/OpenSim/Region/PhysicsModules/BulletS/BSPrimDisplaced.cs
new file mode 100755
index 0000000..d8ed56b
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/BSPrimDisplaced.cs
@@ -0,0 +1,182 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+using System;
+using System.Collections.Generic;
+using System.Reflection;
+using System.Runtime.InteropServices;
+using OpenMetaverse;
+using OpenSim.Framework;
+using OpenSim.Region.PhysicsModules.SharedBase;
+
+using OMV = OpenMetaverse;
+
+namespace OpenSim.Region.PhysicsModule.BulletS
+{
+public class BSPrimDisplaced : BSPrim
+{
+    // The purpose of this subclass is to do any mapping between what the simulator thinks
+    //    the prim position and orientation is and what the physical position/orientation.
+    //    This difference happens because Bullet assumes the center-of-mass is the <0,0,0>
+    //    of the prim/linkset. The simulator, on the other hand, tracks the location of
+    //    the prim/linkset by the location of the root prim. So, if center-of-mass is anywhere
+    //    but the origin of the root prim, the physical origin is displaced from the simulator origin.
+    //
+    // This routine works by capturing ForcePosition and
+    //    adjusting the simulator values (being set) into the physical values.
+    //    The conversion is also done in the opposite direction (physical origin -> simulator origin).
+    //
+    // The updateParameter call is also captured and the values from the physics engine
+    //    are converted into simulator origin values before being passed to the base
+    //    class.
+
+    // PositionDisplacement is the vehicle relative distance from the root prim position to the center-of-mass.
+    public virtual OMV.Vector3 PositionDisplacement { get; set; }
+
+    public BSPrimDisplaced(uint localID, String primName, BSScene parent_scene, OMV.Vector3 pos, OMV.Vector3 size,
+                       OMV.Quaternion rotation, PrimitiveBaseShape pbs, bool pisPhysical)
+        : base(localID, primName, parent_scene, pos, size, rotation, pbs, pisPhysical)
+    {
+        ClearDisplacement();
+    }
+
+    // Clears any center-of-mass displacement introduced by linksets, etc.
+    // Does not clear the displacement set by the user.
+    public void ClearDisplacement()
+    {
+        if (UserSetCenterOfMassDisplacement.HasValue)
+            PositionDisplacement = (OMV.Vector3)UserSetCenterOfMassDisplacement;
+        else
+            PositionDisplacement = OMV.Vector3.Zero;
+    }
+
+    // Set this sets and computes the displacement from the passed prim to the center-of-mass.
+    // A user set value for center-of-mass overrides whatever might be passed in here.
+    // The displacement is in local coordinates (relative to root prim in linkset oriented coordinates).
+    // Returns the relative offset from the root position to the center-of-mass.
+    // Called at taint time.
+    public virtual Vector3 SetEffectiveCenterOfMassDisplacement(Vector3 centerOfMassDisplacement)
+    {
+        PhysScene.AssertInTaintTime("BSPrimDisplaced.SetEffectiveCenterOfMassDisplacement");
+        Vector3 comDisp;
+        if (UserSetCenterOfMassDisplacement.HasValue)
+            comDisp = (OMV.Vector3)UserSetCenterOfMassDisplacement;
+        else
+            comDisp = centerOfMassDisplacement;
+
+        // Eliminate any jitter caused be very slight differences in masses and positions
+        if (comDisp.ApproxEquals(Vector3.Zero, 0.01f) )
+            comDisp = Vector3.Zero;
+
+        DetailLog("{0},BSPrimDisplaced.SetEffectiveCenterOfMassDisplacement,userSet={1},comDisp={2}",
+                                    LocalID, UserSetCenterOfMassDisplacement.HasValue, comDisp);
+        if ( !comDisp.ApproxEquals(PositionDisplacement, 0.01f) )
+        {
+            // Displacement setting is changing.
+            // The relationship between the physical object and simulated object must be aligned.
+            PositionDisplacement = comDisp;
+            this.ForcePosition = RawPosition;
+        }
+
+        return PositionDisplacement;
+    }
+
+    // 'ForcePosition' is the one way to set the physical position of the body in the physics engine.
+    // Displace the simulator idea of position (center of root prim) to the physical position.
+    public override Vector3 ForcePosition
+    {
+        get {
+            OMV.Vector3 physPosition = PhysScene.PE.GetPosition(PhysBody);
+            if (PositionDisplacement != OMV.Vector3.Zero)
+            {
+                // If there is some displacement, return the physical position (center-of-mass)
+                //     location minus the displacement to give the center of the root prim.
+                OMV.Vector3 displacement = PositionDisplacement * ForceOrientation;
+                DetailLog("{0},BSPrimDisplaced.ForcePosition,get,physPos={1},disp={2},simPos={3}",
+                                LocalID, physPosition, displacement, physPosition - displacement);
+                physPosition -= displacement;
+            }
+            RawPosition = physPosition;
+            return physPosition;
+        }
+        set
+        {
+            if (PositionDisplacement != OMV.Vector3.Zero)
+            {
+                // This value is the simulator's idea of where the prim is: the center of the root prim
+                RawPosition = value;
+
+                // Move the passed root prim postion to the center-of-mass position and set in the physics engine.
+                OMV.Vector3 displacement = PositionDisplacement * RawOrientation;
+                OMV.Vector3 displacedPos = RawPosition + displacement;
+                DetailLog("{0},BSPrimDisplaced.ForcePosition,set,simPos={1},disp={2},physPos={3}",
+                                        LocalID, RawPosition, displacement, displacedPos);
+                if (PhysBody.HasPhysicalBody)
+                {
+                    PhysScene.PE.SetTranslation(PhysBody, displacedPos, RawOrientation);
+                    ActivateIfPhysical(false);
+                }
+            }
+            else
+            {
+                base.ForcePosition = value;
+            }
+        }
+    }
+
+    // These are also overridden by BSPrimLinkable if the prim can be part of a linkset
+    public override OMV.Vector3 CenterOfMass
+    {
+        get { return RawPosition; }
+    }
+
+    public override OMV.Vector3 GeometricCenter
+    {
+        get { return RawPosition; }
+    }
+
+    public override void UpdateProperties(EntityProperties entprop)
+    {
+        // Undo any center-of-mass displacement that might have been done.
+        if (PositionDisplacement != OMV.Vector3.Zero)
+        {
+            // The origional shape was offset from 'zero' by PositionDisplacement.
+            // These physical location must be back converted to be centered around the displaced
+            //     root shape.
+
+            // Move the returned center-of-mass location to the root prim location.
+            OMV.Vector3 displacement = PositionDisplacement * entprop.Rotation;
+            OMV.Vector3 displacedPos = entprop.Position - displacement;
+            DetailLog("{0},BSPrimDisplaced.UpdateProperties,physPos={1},disp={2},simPos={3}",
+                                    LocalID, entprop.Position, displacement, displacedPos);
+            entprop.Position = displacedPos;
+        }
+
+        base.UpdateProperties(entprop);
+    }
+}
+}
diff --git a/OpenSim/Region/PhysicsModules/BulletS/BSPrimLinkable.cs b/OpenSim/Region/PhysicsModules/BulletS/BSPrimLinkable.cs
new file mode 100755
index 0000000..55b5da0
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/BSPrimLinkable.cs
@@ -0,0 +1,349 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyrightD
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Text;
+
+using OpenSim.Framework;
+
+using OMV = OpenMetaverse;
+
+namespace OpenSim.Region.PhysicsModule.BulletS
+{
+public class BSPrimLinkable : BSPrimDisplaced
+{
+    // The purpose of this subclass is to add linkset functionality to the prim. This overrides
+    //    operations necessary for keeping the linkset created and, additionally, this
+    //    calls the linkset implementation for its creation and management.
+
+#pragma warning disable 414
+    private static readonly string LogHeader = "[BULLETS PRIMLINKABLE]";
+#pragma warning restore 414
+
+    // This adds the overrides for link() and delink() so the prim is linkable.
+
+    public BSLinkset Linkset { get; set; }
+    // The index of this child prim.
+    public int LinksetChildIndex { get; set; }
+
+    public BSLinkset.LinksetImplementation LinksetType { get; set; }
+
+    public BSPrimLinkable(uint localID, String primName, BSScene parent_scene, OMV.Vector3 pos, OMV.Vector3 size,
+                       OMV.Quaternion rotation, PrimitiveBaseShape pbs, bool pisPhysical)
+        : base(localID, primName, parent_scene, pos, size, rotation, pbs, pisPhysical)
+    {
+        // Default linkset implementation for this prim
+        LinksetType = (BSLinkset.LinksetImplementation)BSParam.LinksetImplementation;
+
+        Linkset = BSLinkset.Factory(PhysScene, this);
+
+        Linkset.Refresh(this);
+    }
+
+    public override void Destroy()
+    {
+        Linkset = Linkset.RemoveMeFromLinkset(this, false /* inTaintTime */);
+        base.Destroy();
+    }
+
+    public override void link(OpenSim.Region.PhysicsModules.SharedBase.PhysicsActor obj)
+    {
+        BSPrimLinkable parent = obj as BSPrimLinkable;
+        if (parent != null)
+        {
+            BSPhysObject parentBefore = Linkset.LinksetRoot;    // DEBUG
+            int childrenBefore = Linkset.NumberOfChildren;      // DEBUG
+
+            Linkset = parent.Linkset.AddMeToLinkset(this);
+
+            DetailLog("{0},BSPrimLinkable.link,call,parentBefore={1}, childrenBefore=={2}, parentAfter={3}, childrenAfter={4}",
+                LocalID, parentBefore.LocalID, childrenBefore, Linkset.LinksetRoot.LocalID, Linkset.NumberOfChildren);
+        }
+        return;
+    }
+
+    public override void delink()
+    {
+        // TODO: decide if this parent checking needs to happen at taint time
+        // Race condition here: if link() and delink() in same simulation tick, the delink will not happen
+
+        BSPhysObject parentBefore = Linkset.LinksetRoot;        // DEBUG
+        int childrenBefore = Linkset.NumberOfChildren;          // DEBUG
+
+        Linkset = Linkset.RemoveMeFromLinkset(this, false /* inTaintTime*/);
+
+        DetailLog("{0},BSPrimLinkable.delink,parentBefore={1},childrenBefore={2},parentAfter={3},childrenAfter={4}, ",
+            LocalID, parentBefore.LocalID, childrenBefore, Linkset.LinksetRoot.LocalID, Linkset.NumberOfChildren);
+        return;
+    }
+
+    // When simulator changes position, this might be moving a child of the linkset.
+    public override OMV.Vector3 Position
+    {
+        get { return base.Position; }
+        set
+        {
+            base.Position = value;
+            PhysScene.TaintedObject(LocalID, "BSPrimLinkable.setPosition", delegate()
+            {
+                Linkset.UpdateProperties(UpdatedProperties.Position, this);
+            });
+        }
+    }
+
+    // When simulator changes orientation, this might be moving a child of the linkset.
+    public override OMV.Quaternion Orientation
+    {
+        get { return base.Orientation; }
+        set
+        {
+            base.Orientation = value;
+            PhysScene.TaintedObject(LocalID, "BSPrimLinkable.setOrientation", delegate()
+            {
+                Linkset.UpdateProperties(UpdatedProperties.Orientation, this);
+            });
+        }
+    }
+
+    public override float TotalMass
+    {
+        get { return Linkset.LinksetMass; }
+    }
+
+    public override OMV.Vector3 CenterOfMass
+    {
+        get { return Linkset.CenterOfMass; }
+    }
+
+    public override OMV.Vector3 GeometricCenter
+    {
+        get { return Linkset.GeometricCenter; }
+    }
+
+    // Refresh the linkset structure and parameters when the prim's physical parameters are changed.
+    public override void UpdatePhysicalParameters()
+    {
+        base.UpdatePhysicalParameters();
+        // Recompute any linkset parameters.
+        // When going from non-physical to physical, this re-enables the constraints that
+        //     had been automatically disabled when the mass was set to zero.
+        // For compound based linksets, this enables and disables interactions of the children.
+        if (Linkset != null)    // null can happen during initialization
+            Linkset.Refresh(this);
+    }
+
+    // When the prim is made dynamic or static, the linkset needs to change.
+    protected override void MakeDynamic(bool makeStatic)
+    {
+        base.MakeDynamic(makeStatic);
+        if (Linkset != null)    // null can happen during initialization
+        {
+            if (makeStatic)
+                Linkset.MakeStatic(this);
+            else
+                Linkset.MakeDynamic(this);
+        }
+    }
+
+    // Body is being taken apart. Remove physical dependencies and schedule a rebuild.
+    protected override void RemoveDependencies()
+    {
+        Linkset.RemoveDependencies(this);
+        base.RemoveDependencies();
+    }
+
+    // Called after a simulation step for the changes in physical object properties.
+    // Do any filtering/modification needed for linksets.
+    public override void UpdateProperties(EntityProperties entprop)
+    {
+        if (Linkset.IsRoot(this) || Linkset.ShouldReportPropertyUpdates(this))
+        {
+            // Properties are only updated for the roots of a linkset.
+            // TODO: this will have to change when linksets are articulated.
+            base.UpdateProperties(entprop);
+        }
+            /*
+        else
+        {
+            // For debugging, report the movement of children
+            DetailLog("{0},BSPrim.UpdateProperties,child,pos={1},orient={2},vel={3},accel={4},rotVel={5}",
+                    LocalID, entprop.Position, entprop.Rotation, entprop.Velocity,
+                    entprop.Acceleration, entprop.RotationalVelocity);
+        }
+             */
+        // The linkset might like to know about changing locations
+        Linkset.UpdateProperties(UpdatedProperties.EntPropUpdates, this);
+    }
+
+    // Called after a simulation step to post a collision with this object.
+    // This returns 'true' if the collision has been queued and the SendCollisions call must
+    //     be made at the end of the simulation step.
+    public override bool Collide(uint collidingWith, BSPhysObject collidee,
+                    OMV.Vector3 contactPoint, OMV.Vector3 contactNormal, float pentrationDepth)
+    {
+        bool ret = false;
+        // Ask the linkset if it wants to handle the collision
+        if (!Linkset.HandleCollide(collidingWith, collidee, contactPoint, contactNormal, pentrationDepth))
+        {
+            // The linkset didn't handle it so pass the collision through normal processing
+            ret = base.Collide(collidingWith, collidee, contactPoint, contactNormal, pentrationDepth);
+        }
+        return ret;
+    }
+
+    // A linkset reports any collision on any part of the linkset.
+    public long SomeCollisionSimulationStep = 0;
+    public override bool HasSomeCollision
+    {
+        get
+        {
+            return (SomeCollisionSimulationStep == PhysScene.SimulationStep) || base.IsColliding;
+        }
+        set
+        {
+            if (value)
+                SomeCollisionSimulationStep = PhysScene.SimulationStep;
+            else
+                SomeCollisionSimulationStep = 0;
+
+            base.HasSomeCollision = value;
+        }
+    }
+
+    // Convert the existing linkset of this prim into a new type.
+    public bool ConvertLinkset(BSLinkset.LinksetImplementation newType)
+    {
+        bool ret = false;
+        if (LinksetType != newType)
+        {
+            DetailLog("{0},BSPrimLinkable.ConvertLinkset,oldT={1},newT={2}", LocalID, LinksetType, newType);
+
+            // Set the implementation type first so the call to BSLinkset.Factory gets the new type.
+            this.LinksetType = newType;
+
+            BSLinkset oldLinkset = this.Linkset;
+            BSLinkset newLinkset = BSLinkset.Factory(PhysScene, this);
+
+            this.Linkset = newLinkset;
+
+            // Pick up any physical dependencies this linkset might have in the physics engine.
+            oldLinkset.RemoveDependencies(this);
+
+            // Create a list of the children (mainly because can't interate through a list that's changing)
+            List<BSPrimLinkable> children = new List<BSPrimLinkable>();
+            oldLinkset.ForEachMember((child) =>
+            {
+                if (!oldLinkset.IsRoot(child))
+                    children.Add(child);
+                return false;   // 'false' says to continue to next member
+            });
+
+            // Remove the children from the old linkset and add to the new (will be a new instance from the factory)
+            foreach (BSPrimLinkable child in children)
+            {
+                oldLinkset.RemoveMeFromLinkset(child, true /*inTaintTime*/);
+            }
+            foreach (BSPrimLinkable child in children)
+            {
+                newLinkset.AddMeToLinkset(child);
+                child.Linkset = newLinkset;
+            }
+
+            // Force the shape and linkset to get reconstructed
+            newLinkset.Refresh(this);
+            this.ForceBodyShapeRebuild(true /* inTaintTime */);
+        }
+        return ret;
+    }
+
+    #region Extension
+    public override object Extension(string pFunct, params object[] pParams)
+    {
+        DetailLog("{0} BSPrimLinkable.Extension,op={1},nParam={2}", LocalID, pFunct, pParams.Length);
+        object ret = null;
+        switch (pFunct)
+        {
+            // physGetLinksetType();
+            // pParams = [ BSPhysObject root, null ]
+            case ExtendedPhysics.PhysFunctGetLinksetType:
+            {
+                ret = (object)LinksetType;
+                DetailLog("{0},BSPrimLinkable.Extension.physGetLinksetType,type={1}", LocalID, ret);
+                break;
+            }
+            // physSetLinksetType(type);
+            // pParams = [ BSPhysObject root, null, integer type ]
+            case ExtendedPhysics.PhysFunctSetLinksetType:
+            {
+                if (pParams.Length > 2)
+                {
+                    BSLinkset.LinksetImplementation linksetType = (BSLinkset.LinksetImplementation)pParams[2];
+                    if (Linkset.IsRoot(this))
+                    {
+                        PhysScene.TaintedObject(LocalID, "BSPrim.PhysFunctSetLinksetType", delegate()
+                        {
+                            // Cause the linkset type to change
+                            DetailLog("{0},BSPrimLinkable.Extension.physSetLinksetType, oldType={1},newType={2}",
+                                                LocalID, Linkset.LinksetImpl, linksetType);
+                            ConvertLinkset(linksetType);
+                        });
+                    }
+                    ret = (object)(int)linksetType;
+                }
+                break;
+            }
+            // physChangeLinkType(linknum, typeCode);
+            // pParams = [ BSPhysObject root, BSPhysObject child, integer linkType ]
+            case ExtendedPhysics.PhysFunctChangeLinkType:
+            {
+                ret = Linkset.Extension(pFunct, pParams);
+                break;
+            }
+            // physGetLinkType(linknum);
+            // pParams = [ BSPhysObject root, BSPhysObject child ]
+            case ExtendedPhysics.PhysFunctGetLinkType:
+            {
+                ret = Linkset.Extension(pFunct, pParams);
+                break;
+            }
+            // physChangeLinkParams(linknum, [code, value, code, value, ...]);
+            // pParams = [ BSPhysObject root, BSPhysObject child, object[] [ string op, object opParam, string op, object opParam, ... ] ]
+            case ExtendedPhysics.PhysFunctChangeLinkParams:
+            {
+                ret = Linkset.Extension(pFunct, pParams);
+                break;
+            }
+            default:
+                ret = base.Extension(pFunct, pParams);
+                break;
+        }
+        return ret;
+    }
+    #endregion  // Extension
+}
+}
diff --git a/OpenSim/Region/PhysicsModules/BulletS/BSScene.cs b/OpenSim/Region/PhysicsModules/BulletS/BSScene.cs
new file mode 100644
index 0000000..452ce55
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/BSScene.cs
@@ -0,0 +1,1333 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyrightD
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Reflection;
+using System.Runtime.InteropServices;
+using System.Text;
+using System.Threading;
+using OpenSim.Framework;
+using OpenSim.Framework.Monitoring;
+using OpenSim.Region.Framework.Scenes;
+using OpenSim.Region.Framework.Interfaces;
+using OpenSim.Region.PhysicsModules.SharedBase;
+using Nini.Config;
+using log4net;
+using OpenMetaverse;
+using Mono.Addins;
+
+namespace OpenSim.Region.PhysicsModule.BulletS
+{
+    [Extension(Path = "/OpenSim/RegionModules", NodeName = "RegionModule", Id = "BulletSPhysicsScene")]
+    public sealed class BSScene : PhysicsScene, IPhysicsParameters, INonSharedRegionModule
+    {
+        internal static readonly ILog m_log = LogManager.GetLogger(System.Reflection.MethodBase.GetCurrentMethod().DeclaringType);
+        internal static readonly string LogHeader = "[BULLETS SCENE]";
+
+        private bool m_Enabled = false;
+        private IConfigSource m_Config;
+
+        // The name of the region we're working for.
+        public string RegionName { get; private set; }
+
+        public string BulletSimVersion = "?";
+
+        // The handle to the underlying managed or unmanaged version of Bullet being used.
+        public string BulletEngineName { get; private set; }
+        public BSAPITemplate PE;
+
+        // If the physics engine is running on a separate thread
+        public Thread m_physicsThread;
+
+        public Dictionary<uint, BSPhysObject> PhysObjects;
+        public BSShapeCollection Shapes;
+
+        // Keeping track of the objects with collisions so we can report begin and end of a collision
+        public HashSet<BSPhysObject> ObjectsWithCollisions = new HashSet<BSPhysObject>();
+        public HashSet<BSPhysObject> ObjectsWithNoMoreCollisions = new HashSet<BSPhysObject>();
+
+        // All the collision processing is protected with this lock object
+        public Object CollisionLock = new Object();
+
+        // Properties are updated here
+        public Object UpdateLock = new Object();
+        public HashSet<BSPhysObject> ObjectsWithUpdates = new HashSet<BSPhysObject>();
+
+        // Keep track of all the avatars so we can send them a collision event
+        //    every tick so OpenSim will update its animation.
+        private HashSet<BSPhysObject> AvatarsInScene = new HashSet<BSPhysObject>();
+        private Object AvatarsInSceneLock = new Object();
+
+        // let my minuions use my logger
+        public ILog Logger { get { return m_log; } }
+
+        public IMesher mesher;
+        public uint WorldID { get; private set; }
+        public BulletWorld World { get; private set; }
+
+        // All the constraints that have been allocated in this instance.
+        public BSConstraintCollection Constraints { get; private set; }
+
+        // Simulation parameters
+        //internal float m_physicsStepTime;   // if running independently, the interval simulated by default
+
+        internal int m_maxSubSteps;
+        internal float m_fixedTimeStep;
+
+        internal float m_simulatedTime;     // the time simulated previously. Used for physics framerate calc.
+
+        internal long m_simulationStep = 0; // The current simulation step.
+        public long SimulationStep { get { return m_simulationStep; } }
+        // A number to use for SimulationStep that is probably not any step value
+        // Used by the collision code (which remembers the step when a collision happens) to remember not any simulation step.
+        public static long NotASimulationStep = -1234;
+
+        internal float LastTimeStep { get; private set; }   // The simulation time from the last invocation of Simulate()
+
+        internal float NominalFrameRate { get; set; }       // Parameterized ideal frame rate that simulation is scaled to
+
+        // Physical objects can register for prestep or poststep events
+        public delegate void PreStepAction(float timeStep);
+        public delegate void PostStepAction(float timeStep);
+        public event PreStepAction BeforeStep;
+        public event PostStepAction AfterStep;
+
+        // A value of the time 'now' so all the collision and update routines do not have to get their own
+        // Set to 'now' just before all the prims and actors are called for collisions and updates
+        public int SimulationNowTime { get; private set; }
+
+        // True if initialized and ready to do simulation steps
+        private bool m_initialized = false;
+
+        // Flag which is true when processing taints.
+        // Not guaranteed to be correct all the time (don't depend on this) but good for debugging.
+        public bool InTaintTime { get; private set; }
+
+        // Pinned memory used to pass step information between managed and unmanaged
+        internal int m_maxCollisionsPerFrame;
+        internal CollisionDesc[] m_collisionArray;
+
+        internal int m_maxUpdatesPerFrame;
+        internal EntityProperties[] m_updateArray;
+
+        /// <summary>
+        /// Used to control physics simulation timing if Bullet is running on its own thread.
+        /// </summary>
+        private ManualResetEvent m_updateWaitEvent;
+
+        public const uint TERRAIN_ID = 0;       // OpenSim senses terrain with a localID of zero
+        public const uint GROUNDPLANE_ID = 1;
+        public const uint CHILDTERRAIN_ID = 2;  // Terrain allocated based on our mega-prim childre start here
+
+        public float SimpleWaterLevel { get; set; }
+        public BSTerrainManager TerrainManager { get; private set; }
+
+        public ConfigurationParameters Params
+        {
+            get { return UnmanagedParams[0]; }
+        }
+        public Vector3 DefaultGravity
+        {
+            get { return new Vector3(0f, 0f, Params.gravity); }
+        }
+        // Just the Z value of the gravity
+        public float DefaultGravityZ
+        {
+            get { return Params.gravity; }
+        }
+
+        // When functions in the unmanaged code must be called, it is only
+        //   done at a known time just before the simulation step. The taint
+        //   system saves all these function calls and executes them in
+        //   order before the simulation.
+        public delegate void TaintCallback();
+        private struct TaintCallbackEntry
+        {
+            public String originator;
+            public String ident;
+            public TaintCallback callback;
+            public TaintCallbackEntry(string pIdent, TaintCallback pCallBack)
+            {
+                originator = BSScene.DetailLogZero;
+                ident = pIdent;
+                callback = pCallBack;
+            }
+            public TaintCallbackEntry(string pOrigin, string pIdent, TaintCallback pCallBack)
+            {
+                originator = pOrigin;
+                ident = pIdent;
+                callback = pCallBack;
+            }
+        }
+        private Object _taintLock = new Object();   // lock for using the next object
+        private List<TaintCallbackEntry> _taintOperations;
+        private Dictionary<string, TaintCallbackEntry> _postTaintOperations;
+        private List<TaintCallbackEntry> _postStepOperations;
+
+        // A pointer to an instance if this structure is passed to the C++ code
+        // Used to pass basic configuration values to the unmanaged code.
+        internal ConfigurationParameters[] UnmanagedParams;
+
+        // Sometimes you just have to log everything.
+        public LogWriter PhysicsLogging;
+        private bool m_physicsLoggingEnabled;
+        private string m_physicsLoggingDir;
+        private string m_physicsLoggingPrefix;
+        private int m_physicsLoggingFileMinutes;
+        private bool m_physicsLoggingDoFlush;
+        private bool m_physicsPhysicalDumpEnabled;
+        public int PhysicsMetricDumpFrames { get; set; }
+        // 'true' of the vehicle code is to log lots of details
+        public bool VehicleLoggingEnabled { get; private set; }
+        public bool VehiclePhysicalLoggingEnabled { get; private set; }
+
+        #region INonSharedRegionModule
+        public string Name
+        {
+            get { return "BulletSim"; }
+        }
+
+        public Type ReplaceableInterface
+        {
+            get { return null; }
+        }
+
+        public void Initialise(IConfigSource source)
+        {
+            // TODO: Move this out of Startup
+            IConfig config = source.Configs["Startup"];
+            if (config != null)
+            {
+                string physics = config.GetString("physics", string.Empty);
+                if (physics == Name)
+                {
+                    m_Enabled = true;
+                    m_Config = source;
+                }
+            }
+
+        }
+
+        public void Close()
+        {
+        }
+
+        public void AddRegion(Scene scene)
+        {
+            if (!m_Enabled)
+                return;
+
+            EngineType = Name;
+            RegionName = scene.RegionInfo.RegionName;
+            PhysicsSceneName = EngineType + "/" + RegionName;
+
+            scene.RegisterModuleInterface<PhysicsScene>(this);
+            Vector3 extent = new Vector3(scene.RegionInfo.RegionSizeX, scene.RegionInfo.RegionSizeY, scene.RegionInfo.RegionSizeZ);
+            Initialise(m_Config, extent);
+
+            base.Initialise(scene.PhysicsRequestAsset,
+                (scene.Heightmap != null ? scene.Heightmap.GetFloatsSerialised() : new float[scene.RegionInfo.RegionSizeX * scene.RegionInfo.RegionSizeY]),
+                (float)scene.RegionInfo.RegionSettings.WaterHeight);
+
+        }
+
+        public void RemoveRegion(Scene scene)
+        {
+            if (!m_Enabled)
+                return;
+        }
+
+        public void RegionLoaded(Scene scene)
+        {
+            if (!m_Enabled)
+                return;
+
+            mesher = scene.RequestModuleInterface<IMesher>();
+            if (mesher == null)
+                m_log.WarnFormat("{0} No mesher. Things will not work well.", LogHeader);
+
+            scene.PhysicsEnabled = true;
+        }
+        #endregion
+
+        #region Initialization
+
+        private void Initialise(IConfigSource config, Vector3 regionExtent)
+        {
+            _taintOperations = new List<TaintCallbackEntry>();
+            _postTaintOperations = new Dictionary<string, TaintCallbackEntry>();
+            _postStepOperations = new List<TaintCallbackEntry>();
+            PhysObjects = new Dictionary<uint, BSPhysObject>();
+            Shapes = new BSShapeCollection(this);
+
+            m_simulatedTime = 0f;
+            LastTimeStep = 0.1f;
+
+            // Allocate pinned memory to pass parameters.
+            UnmanagedParams = new ConfigurationParameters[1];
+
+            // Set default values for physics parameters plus any overrides from the ini file
+            GetInitialParameterValues(config);
+
+            // Force some parameters to values depending on other configurations
+            // Only use heightmap terrain implementation if terrain larger than legacy size
+            if ((uint)regionExtent.X > Constants.RegionSize || (uint)regionExtent.Y > Constants.RegionSize)
+            {
+                m_log.WarnFormat("{0} Forcing terrain implementation to heightmap for large region", LogHeader);
+                BSParam.TerrainImplementation = (float)BSTerrainPhys.TerrainImplementation.Heightmap;
+            }
+
+            // Get the connection to the physics engine (could be native or one of many DLLs)
+            PE = SelectUnderlyingBulletEngine(BulletEngineName);
+
+            // Enable very detailed logging.
+            // By creating an empty logger when not logging, the log message invocation code
+            //     can be left in and every call doesn't have to check for null.
+            if (m_physicsLoggingEnabled)
+            {
+                PhysicsLogging = new LogWriter(m_physicsLoggingDir, m_physicsLoggingPrefix, m_physicsLoggingFileMinutes, m_physicsLoggingDoFlush);
+                PhysicsLogging.ErrorLogger = m_log; // for DEBUG. Let's the logger output its own error messages.
+            }
+            else
+            {
+                PhysicsLogging = new LogWriter();
+            }
+
+            // Allocate memory for returning of the updates and collisions from the physics engine
+            m_collisionArray = new CollisionDesc[m_maxCollisionsPerFrame];
+            m_updateArray = new EntityProperties[m_maxUpdatesPerFrame];
+
+            // The bounding box for the simulated world. The origin is 0,0,0 unless we're
+            //    a child in a mega-region.
+            // Bullet actually doesn't care about the extents of the simulated
+            //    area. It tracks active objects no matter where they are.
+            Vector3 worldExtent = regionExtent;
+
+            World = PE.Initialize(worldExtent, Params, m_maxCollisionsPerFrame, ref m_collisionArray, m_maxUpdatesPerFrame, ref m_updateArray);
+
+            Constraints = new BSConstraintCollection(World);
+
+            TerrainManager = new BSTerrainManager(this, worldExtent);
+            TerrainManager.CreateInitialGroundPlaneAndTerrain();
+
+            // Put some informational messages into the log file.
+            m_log.InfoFormat("{0} Linksets implemented with {1}", LogHeader, (BSLinkset.LinksetImplementation)BSParam.LinksetImplementation);
+
+            InTaintTime = false;
+            m_initialized = true;
+
+            // If the physics engine runs on its own thread, start same.
+            if (BSParam.UseSeparatePhysicsThread)
+            {
+                // The physics simulation should happen independently of the heartbeat loop
+                m_physicsThread 
+                    = WorkManager.StartThread(
+                        BulletSPluginPhysicsThread, 
+                        string.Format("{0} ({1})", BulletEngineName, RegionName), 
+                        ThreadPriority.Normal, 
+                        true, 
+                        true);
+            }
+        }
+
+        // All default parameter values are set here. There should be no values set in the
+        // variable definitions.
+        private void GetInitialParameterValues(IConfigSource config)
+        {
+            ConfigurationParameters parms = new ConfigurationParameters();
+            UnmanagedParams[0] = parms;
+
+            BSParam.SetParameterDefaultValues(this);
+
+            if (config != null)
+            {
+                // If there are specifications in the ini file, use those values
+                IConfig pConfig = config.Configs["BulletSim"];
+                if (pConfig != null)
+                {
+                    BSParam.SetParameterConfigurationValues(this, pConfig);
+
+                    // There are two Bullet implementations to choose from
+                    BulletEngineName = pConfig.GetString("BulletEngine", "BulletUnmanaged");
+
+                    // Very detailed logging for physics debugging
+                    // TODO: the boolean values can be moved to the normal parameter processing.
+                    m_physicsLoggingEnabled = pConfig.GetBoolean("PhysicsLoggingEnabled", false);
+                    m_physicsLoggingDir = pConfig.GetString("PhysicsLoggingDir", ".");
+                    m_physicsLoggingPrefix = pConfig.GetString("PhysicsLoggingPrefix", "physics-%REGIONNAME%-");
+                    m_physicsLoggingFileMinutes = pConfig.GetInt("PhysicsLoggingFileMinutes", 5);
+                    m_physicsLoggingDoFlush = pConfig.GetBoolean("PhysicsLoggingDoFlush", false);
+                    m_physicsPhysicalDumpEnabled = pConfig.GetBoolean("PhysicsPhysicalDumpEnabled", false);
+                    // Very detailed logging for vehicle debugging
+                    VehicleLoggingEnabled = pConfig.GetBoolean("VehicleLoggingEnabled", false);
+                    VehiclePhysicalLoggingEnabled = pConfig.GetBoolean("VehiclePhysicalLoggingEnabled", false);
+
+                    // Do any replacements in the parameters
+                    m_physicsLoggingPrefix = m_physicsLoggingPrefix.Replace("%REGIONNAME%", RegionName);
+                }
+                else
+                {
+                    // Nothing in the configuration INI file so assume unmanaged and other defaults.
+                    BulletEngineName = "BulletUnmanaged";
+                    m_physicsLoggingEnabled = false;
+                    VehicleLoggingEnabled = false;
+                }
+
+                // The material characteristics.
+                BSMaterials.InitializeFromDefaults(Params);
+                if (pConfig != null)
+                {
+                    // Let the user add new and interesting material property values.
+                    BSMaterials.InitializefromParameters(pConfig);
+                }
+            }
+        }
+
+        // A helper function that handles a true/false parameter and returns the proper float number encoding
+        float ParamBoolean(IConfig config, string parmName, float deflt)
+        {
+            float ret = deflt;
+            if (config.Contains(parmName))
+            {
+                ret = ConfigurationParameters.numericFalse;
+                if (config.GetBoolean(parmName, false))
+                {
+                    ret = ConfigurationParameters.numericTrue;
+                }
+            }
+            return ret;
+        }
+
+        // Select the connection to the actual Bullet implementation.
+        // The main engine selection is the engineName up to the first hypen.
+        // So "Bullet-2.80-OpenCL-Intel" specifies the 'bullet' class here and the whole name
+        //     is passed to the engine to do its special selection, etc.
+        private BSAPITemplate SelectUnderlyingBulletEngine(string engineName)
+        {
+            // For the moment, do a simple switch statement.
+            // Someday do fancyness with looking up the interfaces in the assembly.
+            BSAPITemplate ret = null;
+
+            string selectionName = engineName.ToLower();
+            int hyphenIndex = engineName.IndexOf("-");
+            if (hyphenIndex > 0)
+                selectionName = engineName.ToLower().Substring(0, hyphenIndex - 1);
+
+            switch (selectionName)
+            {
+                case "bullet":
+                case "bulletunmanaged":
+                    ret = new BSAPIUnman(engineName, this);
+                    break;
+                case "bulletxna":
+                    ret = new BSAPIXNA(engineName, this);
+                    // Disable some features that are not implemented in BulletXNA
+                    m_log.InfoFormat("{0} Disabling some physics features not implemented by BulletXNA", LogHeader);
+                    m_log.InfoFormat("{0}    Disabling ShouldUseBulletHACD", LogHeader);
+                    BSParam.ShouldUseBulletHACD = false;
+                    m_log.InfoFormat("{0}    Disabling ShouldUseSingleConvexHullForPrims", LogHeader);
+                    BSParam.ShouldUseSingleConvexHullForPrims = false;
+                    m_log.InfoFormat("{0}    Disabling ShouldUseGImpactShapeForPrims", LogHeader);
+                    BSParam.ShouldUseGImpactShapeForPrims = false;
+                    m_log.InfoFormat("{0}    Setting terrain implimentation to Heightmap", LogHeader);
+                    BSParam.TerrainImplementation = (float)BSTerrainPhys.TerrainImplementation.Heightmap;
+                    break;
+            }
+
+            if (ret == null)
+            {
+                m_log.ErrorFormat("{0} COULD NOT SELECT BULLET ENGINE: '[BulletSim]PhysicsEngine' must be either 'BulletUnmanaged-*' or 'BulletXNA-*'", LogHeader);
+            }
+            else
+            {
+                m_log.InfoFormat("{0} Selected bullet engine {1} -> {2}/{3}", LogHeader, engineName, ret.BulletEngineName, ret.BulletEngineVersion);
+            }
+
+            return ret;
+        }
+
+        public override void Dispose()
+        {
+            // m_log.DebugFormat("{0}: Dispose()", LogHeader);
+
+            // make sure no stepping happens while we're deleting stuff
+            m_initialized = false;
+
+            lock (PhysObjects)
+            {
+                foreach (KeyValuePair<uint, BSPhysObject> kvp in PhysObjects)
+                {
+                    kvp.Value.Destroy();
+                }
+                PhysObjects.Clear();
+            }
+
+            // Now that the prims are all cleaned up, there should be no constraints left
+            if (Constraints != null)
+            {
+                Constraints.Dispose();
+                Constraints = null;
+            }
+
+            if (Shapes != null)
+            {
+                Shapes.Dispose();
+                Shapes = null;
+            }
+
+            if (TerrainManager != null)
+            {
+                TerrainManager.ReleaseGroundPlaneAndTerrain();
+                TerrainManager.Dispose();
+                TerrainManager = null;
+            }
+
+            // Anything left in the unmanaged code should be cleaned out
+            PE.Shutdown(World);
+
+            // Not logging any more
+            PhysicsLogging.Close();
+        }
+        #endregion // Construction and Initialization
+
+        #region Prim and Avatar addition and removal
+
+        public override PhysicsActor AddAvatar(string avName, Vector3 position, Vector3 velocity, Vector3 size, bool isFlying)
+        {
+            m_log.ErrorFormat("{0}: CALL TO AddAvatar in BSScene. NOT IMPLEMENTED", LogHeader);
+            return null;
+        }
+
+        public override PhysicsActor AddAvatar(uint localID, string avName, Vector3 position, Vector3 velocity, Vector3 size, bool isFlying)
+        {
+            // m_log.DebugFormat("{0}: AddAvatar: {1}", LogHeader, avName);
+
+            if (!m_initialized) return null;
+
+            BSCharacter actor = new BSCharacter(localID, avName, this, position, velocity, size, isFlying);
+            lock (PhysObjects)
+                PhysObjects.Add(localID, actor);
+
+            // TODO: Remove kludge someday.
+            // We must generate a collision for avatars whether they collide or not.
+            // This is required by OpenSim to update avatar animations, etc.
+            lock (AvatarsInSceneLock)
+                AvatarsInScene.Add(actor);
+
+            return actor;
+        }
+
+        public override void RemoveAvatar(PhysicsActor actor)
+        {
+            // m_log.DebugFormat("{0}: RemoveAvatar", LogHeader);
+
+            if (!m_initialized) return;
+
+            BSCharacter bsactor = actor as BSCharacter;
+            if (bsactor != null)
+            {
+                try
+                {
+                    lock (PhysObjects)
+                        PhysObjects.Remove(bsactor.LocalID);
+                    // Remove kludge someday
+                    lock (AvatarsInSceneLock)
+                        AvatarsInScene.Remove(bsactor);
+                }
+                catch (Exception e)
+                {
+                    m_log.WarnFormat("{0}: Attempt to remove avatar that is not in physics scene: {1}", LogHeader, e);
+                }
+                bsactor.Destroy();
+                // bsactor.dispose();
+            }
+            else
+            {
+                m_log.ErrorFormat("{0}: Requested to remove avatar that is not a BSCharacter. ID={1}, type={2}",
+                                            LogHeader, actor.LocalID, actor.GetType().Name);
+            }
+        }
+
+        public override void RemovePrim(PhysicsActor prim)
+        {
+            if (!m_initialized) return;
+
+            BSPhysObject bsprim = prim as BSPhysObject;
+            if (bsprim != null)
+            {
+                DetailLog("{0},RemovePrim,call", bsprim.LocalID);
+                // m_log.DebugFormat("{0}: RemovePrim. id={1}/{2}", LogHeader, bsprim.Name, bsprim.LocalID);
+                try
+                {
+                    lock (PhysObjects) PhysObjects.Remove(bsprim.LocalID);
+                }
+                catch (Exception e)
+                {
+                    m_log.ErrorFormat("{0}: Attempt to remove prim that is not in physics scene: {1}", LogHeader, e);
+                }
+                bsprim.Destroy();
+                // bsprim.dispose();
+            }
+            else
+            {
+                m_log.ErrorFormat("{0}: Attempt to remove prim that is not a BSPrim type.", LogHeader);
+            }
+        }
+
+        public override PhysicsActor AddPrimShape(string primName, PrimitiveBaseShape pbs, Vector3 position,
+                                                  Vector3 size, Quaternion rotation, bool isPhysical, uint localID)
+        {
+            // m_log.DebugFormat("{0}: AddPrimShape2: {1}", LogHeader, primName);
+
+            if (!m_initialized) return null;
+
+            // DetailLog("{0},BSScene.AddPrimShape,call", localID);
+
+            BSPhysObject prim = new BSPrimLinkable(localID, primName, this, position, size, rotation, pbs, isPhysical);
+            lock (PhysObjects) PhysObjects.Add(localID, prim);
+            return prim;
+        }
+
+        // This is a call from the simulator saying that some physical property has been updated.
+        // The BulletSim driver senses the changing of relevant properties so this taint
+        // information call is not needed.
+        public override void AddPhysicsActorTaint(PhysicsActor prim) { }
+
+        #endregion // Prim and Avatar addition and removal
+
+        #region Simulation
+
+        // Call from the simulator to send physics information to the simulator objects.
+        // This pushes all the collision and property update events into the objects in
+        //    the simulator and, since it is on the heartbeat thread, there is an implicit
+        //    locking of those data structures from other heartbeat events.
+        // If the physics engine is running on a separate thread, the update information
+        //    will be in the ObjectsWithCollions and ObjectsWithUpdates structures.
+        public override float Simulate(float timeStep)
+        {
+            if (!BSParam.UseSeparatePhysicsThread)
+            {
+                DoPhysicsStep(timeStep);
+            }
+            return SendUpdatesToSimulator(timeStep);
+        }
+
+        // Call the physics engine to do one 'timeStep' and collect collisions and updates
+        //    into ObjectsWithCollisions and ObjectsWithUpdates data structures.
+        private void DoPhysicsStep(float timeStep)
+        {
+            // prevent simulation until we've been initialized
+            if (!m_initialized) return;
+
+            LastTimeStep = timeStep;
+
+            int updatedEntityCount = 0;
+            int collidersCount = 0;
+
+            int beforeTime = Util.EnvironmentTickCount();
+            int simTime = 0;
+
+            int numTaints = _taintOperations.Count;
+            InTaintTime = true; // Only used for debugging so locking is not necessary.
+
+            // update the prim states while we know the physics engine is not busy
+            ProcessTaints();
+
+            // Some of the physical objects requre individual, pre-step calls
+            //      (vehicles and avatar movement, in particular)
+            TriggerPreStepEvent(timeStep);
+
+            // the prestep actions might have added taints
+            numTaints += _taintOperations.Count;
+            ProcessTaints();
+
+            InTaintTime = false; // Only used for debugging so locking is not necessary.
+
+            // The following causes the unmanaged code to output ALL the values found in ALL the objects in the world.
+            // Only enable this in a limited test world with few objects.
+            if (m_physicsPhysicalDumpEnabled)
+                PE.DumpAllInfo(World);
+
+            // step the physical world one interval
+            m_simulationStep++;
+            int numSubSteps = 0;
+            try
+            {
+                numSubSteps = PE.PhysicsStep(World, timeStep, m_maxSubSteps, m_fixedTimeStep, out updatedEntityCount, out collidersCount);
+
+            }
+            catch (Exception e)
+            {
+                m_log.WarnFormat("{0},PhysicsStep Exception: nTaints={1}, substeps={2}, updates={3}, colliders={4}, e={5}",
+                            LogHeader, numTaints, numSubSteps, updatedEntityCount, collidersCount, e);
+                DetailLog("{0},PhysicsStepException,call, nTaints={1}, substeps={2}, updates={3}, colliders={4}",
+                            DetailLogZero, numTaints, numSubSteps, updatedEntityCount, collidersCount);
+                updatedEntityCount = 0;
+                collidersCount = 0;
+            }
+
+            // Make the physics engine dump useful statistics periodically
+            if (PhysicsMetricDumpFrames != 0 && ((m_simulationStep % PhysicsMetricDumpFrames) == 0))
+                PE.DumpPhysicsStatistics(World);
+
+            // Get a value for 'now' so all the collision and update routines don't have to get their own.
+            SimulationNowTime = Util.EnvironmentTickCount();
+
+            // Send collision information to the colliding objects. The objects decide if the collision
+            //     is 'real' (like linksets don't collide with themselves) and the individual objects
+            //     know if the simulator has subscribed to collisions.
+            lock (CollisionLock)
+            {
+                if (collidersCount > 0)
+                {
+                    lock (PhysObjects)
+                    {
+                        for (int ii = 0; ii < collidersCount; ii++)
+                        {
+                            uint cA = m_collisionArray[ii].aID;
+                            uint cB = m_collisionArray[ii].bID;
+                            Vector3 point = m_collisionArray[ii].point;
+                            Vector3 normal = m_collisionArray[ii].normal;
+                            float penetration = m_collisionArray[ii].penetration;
+                            SendCollision(cA, cB, point, normal, penetration);
+                            SendCollision(cB, cA, point, -normal, penetration);
+                        }
+                    }
+                }
+            }
+
+            // If any of the objects had updated properties, tell the managed objects about the update
+            //     and remember that there was a change so it will be passed to the simulator.
+            lock (UpdateLock)
+            {
+                if (updatedEntityCount > 0)
+                {
+                    lock (PhysObjects)
+                    {
+                        for (int ii = 0; ii < updatedEntityCount; ii++)
+                        {
+                            EntityProperties entprop = m_updateArray[ii];
+                            BSPhysObject pobj;
+                            if (PhysObjects.TryGetValue(entprop.ID, out pobj))
+                            {
+                                if (pobj.IsInitialized)
+                                    pobj.UpdateProperties(entprop);
+                            }
+                        }
+                    }
+                }
+            }
+
+            // Some actors want to know when the simulation step is complete.
+            TriggerPostStepEvent(timeStep);
+
+            simTime = Util.EnvironmentTickCountSubtract(beforeTime);
+            if (PhysicsLogging.Enabled)
+            {
+                DetailLog("{0},DoPhysicsStep,complete,frame={1}, nTaints={2}, simTime={3}, substeps={4}, updates={5}, colliders={6}, objWColl={7}",
+                                        DetailLogZero, m_simulationStep, numTaints, simTime, numSubSteps,
+                                        updatedEntityCount, collidersCount, ObjectsWithCollisions.Count);
+            }
+
+            // The following causes the unmanaged code to output ALL the values found in ALL the objects in the world.
+            // Only enable this in a limited test world with few objects.
+            if (m_physicsPhysicalDumpEnabled)
+                PE.DumpAllInfo(World);
+
+            // The physics engine returns the number of milliseconds it simulated this call.
+            // These are summed and normalized to one second and divided by 1000 to give the reported physics FPS.
+            // Multiply by a fixed nominal frame rate to give a rate similar to the simulator (usually 55).
+            m_simulatedTime +=  (float)numSubSteps * m_fixedTimeStep * 1000f * NominalFrameRate;
+        }
+
+        // Called by a BSPhysObject to note that it has changed properties and this information
+        //    should be passed up to the simulator at the proper time.
+        // Note: this is called by the BSPhysObject from invocation via DoPhysicsStep() above so
+        //    this is is under UpdateLock.
+        public void PostUpdate(BSPhysObject updatee)
+        {
+            lock (UpdateLock)
+            {
+                ObjectsWithUpdates.Add(updatee);
+            }
+        }
+
+        // The simulator thinks it is physics time so return all the collisions and position
+        //     updates that were collected in actual physics simulation.
+        private float SendUpdatesToSimulator(float timeStep)
+        {
+            if (!m_initialized) return 5.0f;
+
+            DetailLog("{0},SendUpdatesToSimulator,collisions={1},updates={2},simedTime={3}",
+                BSScene.DetailLogZero, ObjectsWithCollisions.Count, ObjectsWithUpdates.Count, m_simulatedTime);
+            // Push the collisions into the simulator.
+            lock (CollisionLock)
+            {
+                if (ObjectsWithCollisions.Count > 0)
+                {
+                    foreach (BSPhysObject bsp in ObjectsWithCollisions)
+                        if (!bsp.SendCollisions())
+                        {
+                            // If the object is done colliding, see that it's removed from the colliding list
+                            ObjectsWithNoMoreCollisions.Add(bsp);
+                        }
+                }
+
+                // This is a kludge to get avatar movement updates.
+                // The simulator expects collisions for avatars even if there are have been no collisions.
+                //    The event updates avatar animations and stuff.
+                // If you fix avatar animation updates, remove this overhead and let normal collision processing happen.
+                // Note that we get a copy of the list to search because SendCollision() can take a while.
+                HashSet<BSPhysObject> tempAvatarsInScene;
+                lock (AvatarsInSceneLock)
+                {
+                    tempAvatarsInScene = new HashSet<BSPhysObject>(AvatarsInScene);
+                }
+                foreach (BSPhysObject actor in tempAvatarsInScene)
+                {
+                    if (!ObjectsWithCollisions.Contains(actor))   // don't call avatars twice
+                        actor.SendCollisions();
+                }
+                tempAvatarsInScene = null;
+
+                // Objects that are done colliding are removed from the ObjectsWithCollisions list.
+                // Not done above because it is inside an iteration of ObjectWithCollisions.
+                // This complex collision processing is required to create an empty collision
+                //     event call after all real collisions have happened on an object. This allows
+                //     the simulator to generate the 'collision end' event.
+                if (ObjectsWithNoMoreCollisions.Count > 0)
+                {
+                    foreach (BSPhysObject po in ObjectsWithNoMoreCollisions)
+                        ObjectsWithCollisions.Remove(po);
+                    ObjectsWithNoMoreCollisions.Clear();
+                }
+            }
+
+            // Call the simulator for each object that has physics property updates.
+            HashSet<BSPhysObject> updatedObjects = null;
+            lock (UpdateLock)
+            {
+                if (ObjectsWithUpdates.Count > 0)
+                {
+                    updatedObjects = ObjectsWithUpdates;
+                    ObjectsWithUpdates = new HashSet<BSPhysObject>();
+                }
+            }
+            if (updatedObjects != null)
+            {
+                foreach (BSPhysObject obj in updatedObjects)
+                {
+                    obj.RequestPhysicsterseUpdate();
+                }
+                updatedObjects.Clear();
+            }
+
+            // Return the framerate simulated to give the above returned results.
+            // (Race condition here but this is just bookkeeping so rare mistakes do not merit a lock).
+            float simTime = m_simulatedTime;
+            m_simulatedTime = 0f;
+            return simTime;
+        }
+
+        // Something has collided
+        private void SendCollision(uint localID, uint collidingWith, Vector3 collidePoint, Vector3 collideNormal, float penetration)
+        {
+            if (localID <= TerrainManager.HighestTerrainID)
+            {
+                return;         // don't send collisions to the terrain
+            }
+
+            BSPhysObject collider;
+            // NOTE that PhysObjects was locked before the call to SendCollision().
+            if (!PhysObjects.TryGetValue(localID, out collider))
+            {
+                // If the object that is colliding cannot be found, just ignore the collision.
+                DetailLog("{0},BSScene.SendCollision,colliderNotInObjectList,id={1},with={2}", DetailLogZero, localID, collidingWith);
+                return;
+            }
+
+            // Note: the terrain is not in the physical object list so 'collidee' can be null when Collide() is called.
+            BSPhysObject collidee = null;
+            PhysObjects.TryGetValue(collidingWith, out collidee);
+
+            // DetailLog("{0},BSScene.SendCollision,collide,id={1},with={2}", DetailLogZero, localID, collidingWith);
+
+            if (collider.IsInitialized)
+            {
+                if (collider.Collide(collidingWith, collidee, collidePoint, collideNormal, penetration))
+                {
+                    // If a collision was 'good', remember to send it to the simulator
+                    lock (CollisionLock)
+                    {
+                        ObjectsWithCollisions.Add(collider);
+                    }
+                }
+            }
+
+            return;
+        }
+
+        public void BulletSPluginPhysicsThread()
+        {
+            Thread.CurrentThread.Priority = ThreadPriority.Highest;
+            m_updateWaitEvent = new ManualResetEvent(false);
+
+            while (m_initialized)
+            {
+                int beginSimulationRealtimeMS = Util.EnvironmentTickCount();
+
+                if (BSParam.Active)
+                    DoPhysicsStep(BSParam.PhysicsTimeStep);
+
+                int simulationRealtimeMS = Util.EnvironmentTickCountSubtract(beginSimulationRealtimeMS);
+                int simulationTimeVsRealtimeDifferenceMS = ((int)(BSParam.PhysicsTimeStep*1000f)) - simulationRealtimeMS;
+
+                if (simulationTimeVsRealtimeDifferenceMS > 0)
+                {
+                    // The simulation of the time interval took less than realtime.
+                    // Do a wait for the rest of realtime.
+                     m_updateWaitEvent.WaitOne(simulationTimeVsRealtimeDifferenceMS);
+                    //Thread.Sleep(simulationTimeVsRealtimeDifferenceMS);
+                }
+                else
+                {
+                    // The simulation took longer than realtime.
+                    // Do some scaling of simulation time.
+                    // TODO.
+                    DetailLog("{0},BulletSPluginPhysicsThread,longerThanRealtime={1}", BSScene.DetailLogZero, simulationTimeVsRealtimeDifferenceMS);
+                }
+
+                Watchdog.UpdateThread();
+            }
+
+            Watchdog.RemoveThread();
+        }
+
+        #endregion // Simulation
+
+        public override void GetResults() { }
+
+        #region Terrain
+
+        public override void SetTerrain(float[] heightMap) {
+            TerrainManager.SetTerrain(heightMap);
+        }
+
+        public override void SetWaterLevel(float baseheight)
+        {
+            SimpleWaterLevel = baseheight;
+        }
+
+        public override void DeleteTerrain()
+        {
+            // m_log.DebugFormat("{0}: DeleteTerrain()", LogHeader);
+        }
+
+        // Although no one seems to check this, I do support combining.
+        public override bool SupportsCombining()
+        {
+            return TerrainManager.SupportsCombining();
+        }
+        // This call says I am a child to region zero in a mega-region. 'pScene' is that
+        //    of region zero, 'offset' is my offset from regions zero's origin, and
+        //    'extents' is the largest XY that is handled in my region.
+        public override void Combine(PhysicsScene pScene, Vector3 offset, Vector3 extents)
+        {
+            TerrainManager.Combine(pScene, offset, extents);
+        }
+
+        // Unhook all the combining that I know about.
+        public override void UnCombine(PhysicsScene pScene)
+        {
+            TerrainManager.UnCombine(pScene);
+        }
+
+        #endregion // Terrain
+
+        public override Dictionary<uint, float> GetTopColliders()
+        {
+            Dictionary<uint, float> topColliders;
+
+            lock (PhysObjects)
+            {
+                foreach (KeyValuePair<uint, BSPhysObject> kvp in PhysObjects)
+                {
+                    kvp.Value.ComputeCollisionScore();
+                }
+
+                List<BSPhysObject> orderedPrims = new List<BSPhysObject>(PhysObjects.Values);
+                orderedPrims.OrderByDescending(p => p.CollisionScore);
+                topColliders = orderedPrims.Take(25).ToDictionary(p => p.LocalID, p => p.CollisionScore);
+            }
+
+            return topColliders;
+        }
+
+        public override bool IsThreaded { get { return false;  } }
+
+        #region Extensions
+        public override object Extension(string pFunct, params object[] pParams)
+        {
+            DetailLog("{0} BSScene.Extension,op={1}", DetailLogZero, pFunct);
+            return base.Extension(pFunct, pParams);
+        }
+        #endregion // Extensions
+
+        public static string PrimitiveBaseShapeToString(PrimitiveBaseShape pbs)
+        {
+            float pathShearX = pbs.PathShearX < 128 ? (float)pbs.PathShearX * 0.01f : (float)(pbs.PathShearX - 256) * 0.01f;
+            float pathShearY = pbs.PathShearY < 128 ? (float)pbs.PathShearY * 0.01f : (float)(pbs.PathShearY - 256) * 0.01f;
+            float pathBegin = (float)pbs.PathBegin * 2.0e-5f;
+            float pathEnd = 1.0f - (float)pbs.PathEnd * 2.0e-5f;
+            float pathScaleX = (float)(200 - pbs.PathScaleX) * 0.01f;
+            float pathScaleY = (float)(200 - pbs.PathScaleY) * 0.01f;
+            float pathTaperX = pbs.PathTaperX * 0.01f;
+            float pathTaperY = pbs.PathTaperY * 0.01f;
+
+            float profileBegin = (float)pbs.ProfileBegin * 2.0e-5f;
+            float profileEnd = 1.0f - (float)pbs.ProfileEnd * 2.0e-5f;
+            float profileHollow = (float)pbs.ProfileHollow * 2.0e-5f;
+            if (profileHollow > 0.95f)
+                profileHollow = 0.95f;
+
+            StringBuilder buff = new StringBuilder();
+            buff.Append("shape=");
+            buff.Append(((ProfileShape)pbs.ProfileShape).ToString());
+            buff.Append(",");
+            buff.Append("hollow=");
+            buff.Append(((HollowShape)pbs.HollowShape).ToString());
+            buff.Append(",");
+            buff.Append("pathCurve=");
+            buff.Append(((Extrusion)pbs.PathCurve).ToString());
+            buff.Append(",");
+            buff.Append("profCurve=");
+            buff.Append(((Extrusion)pbs.ProfileCurve).ToString());
+            buff.Append(",");
+            buff.Append("profHollow=");
+            buff.Append(profileHollow.ToString());
+            buff.Append(",");
+            buff.Append("pathBegEnd=");
+            buff.Append(pathBegin.ToString());
+            buff.Append("/");
+            buff.Append(pathEnd.ToString());
+            buff.Append(",");
+            buff.Append("profileBegEnd=");
+            buff.Append(profileBegin.ToString());
+            buff.Append("/");
+            buff.Append(profileEnd.ToString());
+            buff.Append(",");
+            buff.Append("scaleXY=");
+            buff.Append(pathScaleX.ToString());
+            buff.Append("/");
+            buff.Append(pathScaleY.ToString());
+            buff.Append(",");
+            buff.Append("shearXY=");
+            buff.Append(pathShearX.ToString());
+            buff.Append("/");
+            buff.Append(pathShearY.ToString());
+            buff.Append(",");
+            buff.Append("taperXY=");
+            buff.Append(pbs.PathTaperX.ToString());
+            buff.Append("/");
+            buff.Append(pbs.PathTaperY.ToString());
+            buff.Append(",");
+            buff.Append("skew=");
+            buff.Append(pbs.PathSkew.ToString());
+            buff.Append(",");
+            buff.Append("twist/Beg=");
+            buff.Append(pbs.PathTwist.ToString());
+            buff.Append("/");
+            buff.Append(pbs.PathTwistBegin.ToString());
+
+            return buff.ToString();
+        }
+
+        #region Taints
+        // The simulation execution order is:
+        // Simulate()
+        //    DoOneTimeTaints
+        //    TriggerPreStepEvent
+        //    DoOneTimeTaints
+        //    Step()
+        //       ProcessAndSendToSimulatorCollisions
+        //       ProcessAndSendToSimulatorPropertyUpdates
+        //    TriggerPostStepEvent
+
+        // Calls to the PhysicsActors can't directly call into the physics engine
+        //       because it might be busy. We delay changes to a known time.
+        // We rely on C#'s closure to save and restore the context for the delegate.
+        public void TaintedObject(string pOriginator, string pIdent, TaintCallback pCallback)
+        {
+            TaintedObject(false /*inTaintTime*/, pOriginator, pIdent, pCallback);
+        }
+        public void TaintedObject(uint pOriginator, String pIdent, TaintCallback pCallback)
+        {
+            TaintedObject(false /*inTaintTime*/, m_physicsLoggingEnabled ? pOriginator.ToString() : BSScene.DetailLogZero, pIdent, pCallback);
+        }
+        public void TaintedObject(bool inTaintTime, String pIdent, TaintCallback pCallback)
+        {
+            TaintedObject(inTaintTime, BSScene.DetailLogZero, pIdent, pCallback);
+        }
+        public void TaintedObject(bool inTaintTime, uint pOriginator, String pIdent, TaintCallback pCallback)
+        {
+            TaintedObject(inTaintTime, m_physicsLoggingEnabled ? pOriginator.ToString() : BSScene.DetailLogZero, pIdent, pCallback);
+        }
+        // Sometimes a potentially tainted operation can be used in and out of taint time.
+        // This routine executes the command immediately if in taint-time otherwise it is queued.
+        public void TaintedObject(bool inTaintTime, string pOriginator, string pIdent, TaintCallback pCallback)
+        {
+            if (!m_initialized) return;
+
+            if (inTaintTime)
+                pCallback();
+            else
+            {
+                lock (_taintLock)
+                {
+                    _taintOperations.Add(new TaintCallbackEntry(pOriginator, pIdent, pCallback));
+                }
+            }
+        }
+
+        private void TriggerPreStepEvent(float timeStep)
+        {
+            PreStepAction actions = BeforeStep;
+            if (actions != null)
+                actions(timeStep);
+
+        }
+
+        private void TriggerPostStepEvent(float timeStep)
+        {
+            PostStepAction actions = AfterStep;
+            if (actions != null)
+                actions(timeStep);
+
+        }
+
+        // When someone tries to change a property on a BSPrim or BSCharacter, the object queues
+        // a callback into itself to do the actual property change. That callback is called
+        // here just before the physics engine is called to step the simulation.
+        public void ProcessTaints()
+        {
+            ProcessRegularTaints();
+            ProcessPostTaintTaints();
+        }
+
+        private void ProcessRegularTaints()
+        {
+            if (m_initialized && _taintOperations.Count > 0)  // save allocating new list if there is nothing to process
+            {
+                // swizzle a new list into the list location so we can process what's there
+                List<TaintCallbackEntry> oldList;
+                lock (_taintLock)
+                {
+                    oldList = _taintOperations;
+                    _taintOperations = new List<TaintCallbackEntry>();
+                }
+
+                foreach (TaintCallbackEntry tcbe in oldList)
+                {
+                    try
+                    {
+                        DetailLog("{0},BSScene.ProcessTaints,doTaint,id={1}", tcbe.originator, tcbe.ident); // DEBUG DEBUG DEBUG
+                        tcbe.callback();
+                    }
+                    catch (Exception e)
+                    {
+                        m_log.ErrorFormat("{0}: ProcessTaints: {1}: Exception: {2}", LogHeader, tcbe.ident, e);
+                    }
+                }
+                oldList.Clear();
+            }
+        }
+
+        // Schedule an update to happen after all the regular taints are processed.
+        // Note that new requests for the same operation ("ident") for the same object ("ID")
+        //     will replace any previous operation by the same object.
+        public void PostTaintObject(String ident, uint ID, TaintCallback callback)
+        {
+            string IDAsString = ID.ToString();
+            string uniqueIdent = ident + "-" + IDAsString;
+            lock (_taintLock)
+            {
+                _postTaintOperations[uniqueIdent] = new TaintCallbackEntry(IDAsString, uniqueIdent, callback);
+            }
+
+            return;
+        }
+
+        // Taints that happen after the normal taint processing but before the simulation step.
+        private void ProcessPostTaintTaints()
+        {
+            if (m_initialized && _postTaintOperations.Count > 0)
+            {
+                Dictionary<string, TaintCallbackEntry> oldList;
+                lock (_taintLock)
+                {
+                    oldList = _postTaintOperations;
+                    _postTaintOperations = new Dictionary<string, TaintCallbackEntry>();
+                }
+
+                foreach (KeyValuePair<string,TaintCallbackEntry> kvp in oldList)
+                {
+                    try
+                    {
+                        DetailLog("{0},BSScene.ProcessPostTaintTaints,doTaint,id={1}", DetailLogZero, kvp.Key); // DEBUG DEBUG DEBUG
+                        kvp.Value.callback();
+                    }
+                    catch (Exception e)
+                    {
+                        m_log.ErrorFormat("{0}: ProcessPostTaintTaints: {1}: Exception: {2}", LogHeader, kvp.Key, e);
+                    }
+                }
+                oldList.Clear();
+            }
+        }
+
+        // Only used for debugging. Does not change state of anything so locking is not necessary.
+        public bool AssertInTaintTime(string whereFrom)
+        {
+            if (!InTaintTime)
+            {
+                DetailLog("{0},BSScene.AssertInTaintTime,NOT IN TAINT TIME,Region={1},Where={2}", DetailLogZero, RegionName, whereFrom);
+                m_log.ErrorFormat("{0} NOT IN TAINT TIME!! Region={1}, Where={2}", LogHeader, RegionName, whereFrom);
+                // Util.PrintCallStack(DetailLog);
+            }
+            return InTaintTime;
+        }
+
+        #endregion // Taints
+
+        #region IPhysicsParameters
+        // Get the list of parameters this physics engine supports
+        public PhysParameterEntry[] GetParameterList()
+        {
+            BSParam.BuildParameterTable();
+            return BSParam.SettableParameters;
+        }
+
+        // Set parameter on a specific or all instances.
+        // Return 'false' if not able to set the parameter.
+        // Setting the value in the m_params block will change the value the physics engine
+        //   will use the next time since it's pinned and shared memory.
+        // Some of the values require calling into the physics engine to get the new
+        //   value activated ('terrainFriction' for instance).
+        public bool SetPhysicsParameter(string parm, string val, uint localID)
+        {
+            bool ret = false;
+
+            BSParam.ParameterDefnBase theParam;
+            if (BSParam.TryGetParameter(parm, out theParam))
+            {
+                // Set the value in the C# code
+                theParam.SetValue(this, val);
+
+                // Optionally set the parameter in the unmanaged code
+                if (theParam.HasSetOnObject)
+                {
+                    // update all the localIDs specified
+                    // If the local ID is APPLY_TO_NONE, just change the default value
+                    // If the localID is APPLY_TO_ALL change the default value and apply the new value to all the lIDs
+                    // If the localID is a specific object, apply the parameter change to only that object
+                    List<uint> objectIDs = new List<uint>();
+                    switch (localID)
+                    {
+                        case PhysParameterEntry.APPLY_TO_NONE:
+                            // This will cause a call into the physical world if some operation is specified (SetOnObject).
+                            objectIDs.Add(TERRAIN_ID);
+                            TaintedUpdateParameter(parm, objectIDs, val);
+                            break;
+                        case PhysParameterEntry.APPLY_TO_ALL:
+                            lock (PhysObjects) objectIDs = new List<uint>(PhysObjects.Keys);
+                            TaintedUpdateParameter(parm, objectIDs, val);
+                            break;
+                        default:
+                            // setting only one localID
+                            objectIDs.Add(localID);
+                            TaintedUpdateParameter(parm, objectIDs, val);
+                            break;
+                    }
+                }
+
+                ret = true;
+            }
+            return ret;
+        }
+
+        // schedule the actual updating of the paramter to when the phys engine is not busy
+        private void TaintedUpdateParameter(string parm, List<uint> lIDs, string val)
+        {
+            string xval = val;
+            List<uint> xlIDs = lIDs;
+            string xparm = parm;
+            TaintedObject(DetailLogZero, "BSScene.UpdateParameterSet", delegate() {
+                BSParam.ParameterDefnBase thisParam;
+                if (BSParam.TryGetParameter(xparm, out thisParam))
+                {
+                    if (thisParam.HasSetOnObject)
+                    {
+                        foreach (uint lID in xlIDs)
+                        {
+                            BSPhysObject theObject = null;
+                            if (PhysObjects.TryGetValue(lID, out theObject))
+                                thisParam.SetOnObject(this, theObject);
+                        }
+                    }
+                }
+            });
+        }
+
+        // Get parameter.
+        // Return 'false' if not able to get the parameter.
+        public bool GetPhysicsParameter(string parm, out string value)
+        {
+            string val = String.Empty;
+            bool ret = false;
+            BSParam.ParameterDefnBase theParam;
+            if (BSParam.TryGetParameter(parm, out theParam))
+            {
+                val = theParam.GetValue(this);
+                ret = true;
+            }
+            value = val;
+            return ret;
+        }
+
+        #endregion IPhysicsParameters
+
+        // Invoke the detailed logger and output something if it's enabled.
+        public void DetailLog(string msg, params Object[] args)
+        {
+            PhysicsLogging.Write(msg, args);
+        }
+        // Used to fill in the LocalID when there isn't one. It's the correct number of characters.
+        public const string DetailLogZero = "0000000000";
+
+    }
+}
diff --git a/OpenSim/Region/PhysicsModules/BulletS/BSShapeCollection.cs b/OpenSim/Region/PhysicsModules/BulletS/BSShapeCollection.cs
new file mode 100755
index 0000000..b100273
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/BSShapeCollection.cs
@@ -0,0 +1,425 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyrightD
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+using System;
+using System.Collections.Generic;
+using System.Text;
+using OMV = OpenMetaverse;
+using OpenSim.Framework;
+using OpenSim.Region.PhysicsModules.SharedBase;
+using OpenSim.Region.PhysicsModule.ConvexDecompositionDotNet;
+
+namespace OpenSim.Region.PhysicsModule.BulletS
+{
+public sealed class BSShapeCollection : IDisposable
+{
+#pragma warning disable 414
+    private static string LogHeader = "[BULLETSIM SHAPE COLLECTION]";
+#pragma warning restore 414
+
+    private BSScene m_physicsScene { get; set; }
+
+    private Object m_collectionActivityLock = new Object();
+
+    private bool DDetail = false;
+
+    public BSShapeCollection(BSScene physScene)
+    {
+        m_physicsScene = physScene;
+        // Set the next to 'true' for very detailed shape update detailed logging (detailed details?)
+        // While detailed debugging is still active, this is better than commenting out all the
+        //     DetailLog statements. When debugging slows down, this and the protected logging
+        //     statements can be commented/removed.
+        DDetail = true;
+    }
+
+    public void Dispose()
+    {
+        // TODO!!!!!!!!!
+    }
+
+    // Callbacks called just before either the body or shape is destroyed.
+    // Mostly used for changing bodies out from under Linksets.
+    // Useful for other cases where parameters need saving.
+    // Passing 'null' says no callback.
+    public delegate void PhysicalDestructionCallback(BulletBody pBody, BulletShape pShape);
+
+    // Called to update/change the body and shape for an object.
+    // The object has some shape and body on it. Here we decide if that is the correct shape
+    //    for the current state of the object (static/dynamic/...).
+    // If bodyCallback is not null, it is called if either the body or the shape are changed
+    //    so dependencies (like constraints) can be removed before the physical object is dereferenced.
+    // Return 'true' if either the body or the shape changed.
+    // Called at taint-time.
+    public bool GetBodyAndShape(bool forceRebuild, BulletWorld sim, BSPhysObject prim, PhysicalDestructionCallback bodyCallback)
+    {
+        m_physicsScene.AssertInTaintTime("BSShapeCollection.GetBodyAndShape");
+
+        bool ret = false;
+
+        // This lock could probably be pushed down lower but building shouldn't take long
+        lock (m_collectionActivityLock)
+        {
+            // Do we have the correct geometry for this type of object?
+            // Updates prim.BSShape with information/pointers to shape.
+            // Returns 'true' of BSShape is changed to a new shape.
+            bool newGeom = CreateGeom(forceRebuild, prim, bodyCallback);
+            // If we had to select a new shape geometry for the object,
+            //    rebuild the body around it.
+            // Updates prim.BSBody with information/pointers to requested body
+            // Returns 'true' if BSBody was changed.
+            bool newBody = CreateBody((newGeom || forceRebuild), prim, m_physicsScene.World, bodyCallback);
+            ret = newGeom || newBody;
+        }
+        DetailLog("{0},BSShapeCollection.GetBodyAndShape,taintExit,force={1},ret={2},body={3},shape={4}",
+                                prim.LocalID, forceRebuild, ret, prim.PhysBody, prim.PhysShape);
+
+        return ret;
+    }
+
+    public bool GetBodyAndShape(bool forceRebuild, BulletWorld sim, BSPhysObject prim)
+    {
+        return GetBodyAndShape(forceRebuild, sim, prim, null);
+    }
+
+    // If the existing prim's shape is to be replaced, remove the tie to the existing shape
+    //     before replacing it.
+    private void DereferenceExistingShape(BSPhysObject prim, PhysicalDestructionCallback shapeCallback)
+    {
+        if (prim.PhysShape.HasPhysicalShape)
+        {
+            if (shapeCallback != null)
+                shapeCallback(prim.PhysBody, prim.PhysShape.physShapeInfo);
+            prim.PhysShape.Dereference(m_physicsScene);
+        }
+        prim.PhysShape = new BSShapeNull();
+    }
+
+    // Create the geometry information in Bullet for later use.
+    // The objects needs a hull if it's physical otherwise a mesh is enough.
+    // if 'forceRebuild' is true, the geometry is unconditionally rebuilt. For meshes and hulls,
+    //     shared geometries will be used. If the parameters of the existing shape are the same
+    //     as this request, the shape is not rebuilt.
+    // Info in prim.BSShape is updated to the new shape.
+    // Returns 'true' if the geometry was rebuilt.
+    // Called at taint-time!
+    public const int AvatarShapeCapsule = 0;
+    public const int AvatarShapeCube = 1;
+    public const int AvatarShapeOvoid = 2;
+    public const int AvatarShapeMesh = 3;
+    private bool CreateGeom(bool forceRebuild, BSPhysObject prim, PhysicalDestructionCallback shapeCallback)
+    {
+        bool ret = false;
+        bool haveShape = false;
+        bool nativeShapePossible = true;
+        PrimitiveBaseShape pbs = prim.BaseShape;
+
+        // Kludge to create the capsule for the avatar.
+        // TDOD: Remove/redo this when BSShapeAvatar is working!!
+        BSCharacter theChar = prim as BSCharacter;
+        if (theChar != null)
+        {
+            DereferenceExistingShape(prim, shapeCallback);
+            switch (BSParam.AvatarShape)
+            {
+                case AvatarShapeCapsule:
+                    prim.PhysShape = BSShapeNative.GetReference(m_physicsScene, prim,
+                                            BSPhysicsShapeType.SHAPE_CAPSULE, FixedShapeKey.KEY_CAPSULE);
+                    ret = true;
+                    haveShape = true;
+                    break;
+                case AvatarShapeCube:
+                    prim.PhysShape = BSShapeNative.GetReference(m_physicsScene, prim,
+                                            BSPhysicsShapeType.SHAPE_BOX, FixedShapeKey.KEY_CAPSULE);
+                    ret = true;
+                    haveShape = true;
+                    break;
+                case AvatarShapeOvoid:
+                    // Saddly, Bullet doesn't scale spheres so this doesn't work as an avatar shape
+                    prim.PhysShape = BSShapeNative.GetReference(m_physicsScene, prim,
+                                            BSPhysicsShapeType.SHAPE_SPHERE, FixedShapeKey.KEY_CAPSULE);
+                    ret = true;
+                    haveShape = true;
+                    break;
+                case AvatarShapeMesh:
+                    break;
+                default:
+                    break;
+            }
+        }
+
+        // If the prim attributes are simple, this could be a simple Bullet native shape
+        // Native shapes work whether to object is static or physical.
+        if (!haveShape
+                && nativeShapePossible
+                && pbs != null
+                && PrimHasNoCuts(pbs)
+                && ( !pbs.SculptEntry || (pbs.SculptEntry && !BSParam.ShouldMeshSculptedPrim) )
+            )
+        {
+            // Get the scale of any existing shape so we can see if the new shape is same native type and same size.
+            OMV.Vector3 scaleOfExistingShape = OMV.Vector3.Zero;
+            if (prim.PhysShape.HasPhysicalShape)
+                scaleOfExistingShape = m_physicsScene.PE.GetLocalScaling(prim.PhysShape.physShapeInfo);
+
+            if (DDetail) DetailLog("{0},BSShapeCollection.CreateGeom,maybeNative,force={1},primScale={2},primSize={3},primShape={4}",
+                        prim.LocalID, forceRebuild, prim.Scale, prim.Size, prim.PhysShape.physShapeInfo.shapeType);
+
+            // It doesn't look like Bullet scales native spheres so make sure the scales are all equal
+            if ((pbs.ProfileShape == ProfileShape.HalfCircle && pbs.PathCurve == (byte)Extrusion.Curve1)
+                                && pbs.Scale.X == pbs.Scale.Y && pbs.Scale.Y == pbs.Scale.Z)
+            {
+                haveShape = true;
+                if (forceRebuild
+                        || prim.PhysShape.ShapeType != BSPhysicsShapeType.SHAPE_SPHERE
+                    )
+                {
+                    DereferenceExistingShape(prim, shapeCallback);
+                    prim.PhysShape = BSShapeNative.GetReference(m_physicsScene, prim,
+                                            BSPhysicsShapeType.SHAPE_SPHERE, FixedShapeKey.KEY_SPHERE);
+                    ret = true;
+                }
+                if (DDetail) DetailLog("{0},BSShapeCollection.CreateGeom,sphere,force={1},rebuilt={2},shape={3}",
+                                        prim.LocalID, forceRebuild, ret, prim.PhysShape);
+            }
+            // If we didn't make a sphere, maybe a box will work.
+            if (!haveShape && pbs.ProfileShape == ProfileShape.Square && pbs.PathCurve == (byte)Extrusion.Straight)
+            {
+                haveShape = true;
+                if (forceRebuild
+                        || prim.Scale != scaleOfExistingShape
+                        || prim.PhysShape.ShapeType != BSPhysicsShapeType.SHAPE_BOX
+                        )
+                {
+                    DereferenceExistingShape(prim, shapeCallback);
+                    prim.PhysShape = BSShapeNative.GetReference(m_physicsScene, prim,
+                                            BSPhysicsShapeType.SHAPE_BOX, FixedShapeKey.KEY_BOX);
+                    ret = true;
+                }
+                if (DDetail) DetailLog("{0},BSShapeCollection.CreateGeom,box,force={1},rebuilt={2},shape={3}",
+                                        prim.LocalID, forceRebuild, ret, prim.PhysShape);
+            }
+        }
+
+        // If a simple shape is not happening, create a mesh and possibly a hull.
+        if (!haveShape && pbs != null)
+        {
+            ret = CreateGeomMeshOrHull(prim, shapeCallback);
+        }
+
+        return ret;
+    }
+
+    // return 'true' if this shape description does not include any cutting or twisting.
+    public static bool PrimHasNoCuts(PrimitiveBaseShape pbs)
+    {
+        return pbs.ProfileBegin == 0 && pbs.ProfileEnd == 0
+            && pbs.ProfileHollow == 0
+            && pbs.PathTwist == 0 && pbs.PathTwistBegin == 0
+            && pbs.PathBegin == 0 && pbs.PathEnd == 0
+            && pbs.PathTaperX == 0 && pbs.PathTaperY == 0
+            && pbs.PathScaleX == 100 && pbs.PathScaleY == 100
+            && pbs.PathShearX == 0 && pbs.PathShearY == 0;
+    }
+
+    // return 'true' if the prim's shape was changed.
+    private bool CreateGeomMeshOrHull(BSPhysObject prim, PhysicalDestructionCallback shapeCallback)
+    {
+
+        bool ret = false;
+        // Note that if it's a native shape, the check for physical/non-physical is not
+        //     made. Native shapes work in either case.
+        if (prim.IsPhysical && BSParam.ShouldUseHullsForPhysicalObjects)
+        {
+            // Use a simple, single mesh convex hull shape if the object is simple enough
+            BSShape potentialHull = null;
+
+            PrimitiveBaseShape pbs = prim.BaseShape;
+            // Use a simple, one section convex shape for prims that are probably convex (no cuts or twists)
+            if (BSParam.ShouldUseSingleConvexHullForPrims
+                && pbs != null
+                && !pbs.SculptEntry
+                && PrimHasNoCuts(pbs)
+                )
+            {
+                potentialHull = BSShapeConvexHull.GetReference(m_physicsScene, false /* forceRebuild */, prim);
+            }
+            // Use the GImpact shape if it is a prim that has some concaveness
+            if (potentialHull == null
+                && BSParam.ShouldUseGImpactShapeForPrims
+                && pbs != null
+                && !pbs.SculptEntry
+                )
+            {
+                    potentialHull = BSShapeGImpact.GetReference(m_physicsScene, false /* forceRebuild */, prim);
+            }
+            // If not any of the simple cases, just make a hull
+            if (potentialHull == null)
+            {
+                potentialHull = BSShapeHull.GetReference(m_physicsScene, false /*forceRebuild*/, prim);
+            }
+
+            // If the current shape is not what is on the prim at the moment, time to change.
+            if (!prim.PhysShape.HasPhysicalShape
+                        || potentialHull.ShapeType != prim.PhysShape.ShapeType
+                        || potentialHull.physShapeInfo.shapeKey != prim.PhysShape.physShapeInfo.shapeKey)
+            {
+                DereferenceExistingShape(prim, shapeCallback);
+                prim.PhysShape = potentialHull;
+                ret = true;
+            }
+            else
+            {
+                // The current shape on the prim is the correct one. We don't need the potential reference.
+                potentialHull.Dereference(m_physicsScene);
+            }
+            if (DDetail) DetailLog("{0},BSShapeCollection.CreateGeom,hull,shape={1}", prim.LocalID, prim.PhysShape);
+        }
+        else
+        {
+            // Non-physical objects should be just meshes.
+            BSShape potentialMesh = BSShapeMesh.GetReference(m_physicsScene, false /*forceRebuild*/, prim);
+            // If the current shape is not what is on the prim at the moment, time to change.
+            if (!prim.PhysShape.HasPhysicalShape
+                        || potentialMesh.ShapeType != prim.PhysShape.ShapeType
+                        || potentialMesh.physShapeInfo.shapeKey != prim.PhysShape.physShapeInfo.shapeKey)
+            {
+                DereferenceExistingShape(prim, shapeCallback);
+                prim.PhysShape = potentialMesh;
+                ret = true;
+            }
+            else
+            {
+                // We don't need this reference to the mesh that is already being using.
+                potentialMesh.Dereference(m_physicsScene);
+            }
+            if (DDetail) DetailLog("{0},BSShapeCollection.CreateGeom,mesh,shape={1}", prim.LocalID, prim.PhysShape);
+        }
+        return ret;
+    }
+
+    // Track another user of a body.
+    // We presume the caller has allocated the body.
+    // Bodies only have one user so the body is just put into the world if not already there.
+    private void ReferenceBody(BulletBody body)
+    {
+        lock (m_collectionActivityLock)
+        {
+            if (DDetail) DetailLog("{0},BSShapeCollection.ReferenceBody,newBody,body={1}", body.ID, body);
+            if (!m_physicsScene.PE.IsInWorld(m_physicsScene.World, body))
+            {
+                m_physicsScene.PE.AddObjectToWorld(m_physicsScene.World, body);
+                if (DDetail) DetailLog("{0},BSShapeCollection.ReferenceBody,addedToWorld,ref={1}", body.ID, body);
+            }
+        }
+    }
+
+    // Release the usage of a body.
+    // Called when releasing use of a BSBody. BSShape is handled separately.
+    // Called in taint time.
+    public void DereferenceBody(BulletBody body, PhysicalDestructionCallback bodyCallback )
+    {
+        if (!body.HasPhysicalBody)
+            return;
+
+        m_physicsScene.AssertInTaintTime("BSShapeCollection.DereferenceBody");
+
+        lock (m_collectionActivityLock)
+        {
+            if (DDetail) DetailLog("{0},BSShapeCollection.DereferenceBody,DestroyingBody,body={1}", body.ID, body);
+            // If the caller needs to know the old body is going away, pass the event up.
+            if (bodyCallback != null)
+                bodyCallback(body, null);
+
+            // Removing an object not in the world is a NOOP
+            m_physicsScene.PE.RemoveObjectFromWorld(m_physicsScene.World, body);
+
+            // Zero any reference to the shape so it is not freed when the body is deleted.
+            m_physicsScene.PE.SetCollisionShape(m_physicsScene.World, body, null);
+
+            m_physicsScene.PE.DestroyObject(m_physicsScene.World, body);
+        }
+    }
+
+    // Create a body object in Bullet.
+    // Updates prim.BSBody with the information about the new body if one is created.
+    // Returns 'true' if an object was actually created.
+    // Called at taint-time.
+    private bool CreateBody(bool forceRebuild, BSPhysObject prim, BulletWorld sim, PhysicalDestructionCallback bodyCallback)
+    {
+        bool ret = false;
+
+        // the mesh, hull or native shape must have already been created in Bullet
+        bool mustRebuild = !prim.PhysBody.HasPhysicalBody;
+
+        // If there is an existing body, verify it's of an acceptable type.
+        // If not a solid object, body is a GhostObject. Otherwise a RigidBody.
+        if (!mustRebuild)
+        {
+            CollisionObjectTypes bodyType = (CollisionObjectTypes)m_physicsScene.PE.GetBodyType(prim.PhysBody);
+            if (prim.IsSolid && bodyType != CollisionObjectTypes.CO_RIGID_BODY
+                || !prim.IsSolid && bodyType != CollisionObjectTypes.CO_GHOST_OBJECT)
+            {
+                // If the collisionObject is not the correct type for solidness, rebuild what's there
+                mustRebuild = true;
+                if (DDetail) DetailLog("{0},BSShapeCollection.CreateBody,forceRebuildBecauseChangingBodyType,bodyType={1}", prim.LocalID, bodyType);
+            }
+        }
+
+        if (mustRebuild || forceRebuild)
+        {
+            // Free any old body
+            DereferenceBody(prim.PhysBody, bodyCallback);
+
+            BulletBody aBody;
+            if (prim.IsSolid)
+            {
+                aBody = m_physicsScene.PE.CreateBodyFromShape(sim, prim.PhysShape.physShapeInfo, prim.LocalID, prim.RawPosition, prim.RawOrientation);
+                if (DDetail) DetailLog("{0},BSShapeCollection.CreateBody,rigid,body={1}", prim.LocalID, aBody);
+            }
+            else
+            {
+                aBody = m_physicsScene.PE.CreateGhostFromShape(sim, prim.PhysShape.physShapeInfo, prim.LocalID, prim.RawPosition, prim.RawOrientation);
+                if (DDetail) DetailLog("{0},BSShapeCollection.CreateBody,ghost,body={1}", prim.LocalID, aBody);
+            }
+
+            ReferenceBody(aBody);
+
+            prim.PhysBody = aBody;
+
+            ret = true;
+        }
+
+        return ret;
+    }
+
+    private void DetailLog(string msg, params Object[] args)
+    {
+        if (m_physicsScene.PhysicsLogging.Enabled)
+            m_physicsScene.DetailLog(msg, args);
+    }
+}
+}
diff --git a/OpenSim/Region/PhysicsModules/BulletS/BSShapes.cs b/OpenSim/Region/PhysicsModules/BulletS/BSShapes.cs
new file mode 100755
index 0000000..086a412
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/BSShapes.cs
@@ -0,0 +1,1463 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyrightD
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+using System;
+using System.Collections.Generic;
+using System.Text;
+
+using OpenSim.Framework;
+using OpenSim.Region.PhysicsModules.SharedBase;
+using OpenSim.Region.PhysicsModules.Meshing;
+using OpenSim.Region.PhysicsModule.ConvexDecompositionDotNet;
+
+using OMV = OpenMetaverse;
+
+namespace OpenSim.Region.PhysicsModule.BulletS
+{
+// Information class that holds stats for the shape. Which values mean
+//     something depends on the type of shape.
+// This information is used for debugging and stats and is not used
+//     for operational things.
+public class ShapeInfoInfo
+{
+    public int Vertices { get; set; }
+    private int m_hullCount;
+    private int[] m_verticesPerHull;
+    public ShapeInfoInfo()
+    {
+        Vertices = 0;
+        m_hullCount = 0;
+        m_verticesPerHull = null;
+    }
+    public int HullCount
+    {
+        set
+        {
+            m_hullCount = value;
+            m_verticesPerHull = new int[m_hullCount];
+            Array.Clear(m_verticesPerHull, 0, m_hullCount);
+        }
+        get { return m_hullCount; }
+    }
+    public void SetVerticesPerHull(int hullNum, int vertices)
+    {
+        if (m_verticesPerHull != null && hullNum < m_verticesPerHull.Length)
+        {
+            m_verticesPerHull[hullNum] = vertices;
+        }
+    }
+    public int GetVerticesPerHull(int hullNum)
+    {
+        if (m_verticesPerHull != null && hullNum < m_verticesPerHull.Length)
+        {
+            return m_verticesPerHull[hullNum];
+        }
+        return 0;
+    }
+    public override string ToString()
+    {
+        StringBuilder buff = new StringBuilder();
+        // buff.Append("ShapeInfo=<");
+        buff.Append("<");
+        if (Vertices > 0)
+        {
+            buff.Append("verts=");
+            buff.Append(Vertices.ToString());
+        }
+
+        if (Vertices > 0 && HullCount > 0) buff.Append(",");
+
+        if (HullCount > 0)
+        {
+            buff.Append("nHulls=");
+            buff.Append(HullCount.ToString());
+            buff.Append(",");
+            buff.Append("hullVerts=");
+            for (int ii = 0; ii < HullCount; ii++)
+            {
+                if (ii != 0) buff.Append(",");
+                buff.Append(GetVerticesPerHull(ii).ToString());
+            }
+        }
+        buff.Append(">");
+        return buff.ToString();
+    }
+}
+
+public abstract class BSShape
+{
+    private static string LogHeader = "[BULLETSIM SHAPE]";
+
+    public int referenceCount { get; set; }
+    public DateTime lastReferenced { get; set; }
+    public BulletShape physShapeInfo { get; set; }
+    public ShapeInfoInfo shapeInfo { get; private set; }
+
+    public BSShape()
+    {
+        referenceCount = 1;
+        lastReferenced = DateTime.Now;
+        physShapeInfo = new BulletShape();
+        shapeInfo = new ShapeInfoInfo();
+    }
+    public BSShape(BulletShape pShape)
+    {
+        referenceCount = 1;
+        lastReferenced = DateTime.Now;
+        physShapeInfo = pShape;
+        shapeInfo = new ShapeInfoInfo();
+    }
+
+    // Get another reference to this shape.
+    public abstract BSShape GetReference(BSScene pPhysicsScene, BSPhysObject pPrim);
+
+    // Called when this shape is being used again.
+    // Used internally. External callers should call instance.GetReference() to properly copy/reference
+    //       the shape.
+    protected virtual void IncrementReference()
+    {
+        referenceCount++;
+        lastReferenced = DateTime.Now;
+    }
+
+    // Called when this shape is done being used.
+    protected virtual void DecrementReference()
+    {
+        referenceCount--;
+        lastReferenced = DateTime.Now;
+    }
+
+    // Release the use of a physical shape.
+    public abstract void Dereference(BSScene physicsScene);
+
+    // Return 'true' if there is an allocated physics physical shape under this class instance.
+    public virtual bool HasPhysicalShape
+    {
+        get
+        {
+            if (physShapeInfo != null)
+                return physShapeInfo.HasPhysicalShape;
+            return false;
+        }
+    }
+    public virtual BSPhysicsShapeType ShapeType
+    {
+        get
+        {
+            BSPhysicsShapeType ret = BSPhysicsShapeType.SHAPE_UNKNOWN;
+            if (physShapeInfo != null && physShapeInfo.HasPhysicalShape)
+                ret = physShapeInfo.shapeType;
+            return ret;
+        }
+    }
+
+    // Returns a string for debugging that uniquily identifies the memory used by this instance
+    public virtual string AddrString
+    {
+        get
+        {
+            if (physShapeInfo != null)
+                return physShapeInfo.AddrString;
+            return "unknown";
+        }
+    }
+
+    public override string ToString()
+    {
+        StringBuilder buff = new StringBuilder();
+        if (physShapeInfo == null)
+        {
+            buff.Append("<noPhys");
+        }
+        else
+        {
+            buff.Append("<phy=");
+            buff.Append(physShapeInfo.ToString());
+        }
+        buff.Append(",c=");
+        buff.Append(referenceCount.ToString());
+        buff.Append(">");
+        return buff.ToString();
+    }
+
+    #region Common shape routines
+    // Create a hash of all the shape parameters to be used as a key for this particular shape.
+    public static System.UInt64 ComputeShapeKey(OMV.Vector3 size, PrimitiveBaseShape pbs, out float retLod)
+    {
+        // level of detail based on size and type of the object
+        float lod = BSParam.MeshLOD;
+        if (pbs.SculptEntry)
+            lod = BSParam.SculptLOD;
+
+        // Mega prims usually get more detail because one can interact with shape approximations at this size.
+        float maxAxis = Math.Max(size.X, Math.Max(size.Y, size.Z));
+        if (maxAxis > BSParam.MeshMegaPrimThreshold)
+            lod = BSParam.MeshMegaPrimLOD;
+
+        retLod = lod;
+        return pbs.GetMeshKey(size, lod);
+    }
+
+    // The creation of a mesh or hull can fail if an underlying asset is not available.
+    // There are two cases: 1) the asset is not in the cache and it needs to be fetched;
+    //     and 2) the asset cannot be converted (like failed decompression of JPEG2000s).
+    //     The first case causes the asset to be fetched. The second case requires
+    //     us to not loop forever.
+    // Called after creating a physical mesh or hull. If the physical shape was created,
+    //     just return.
+    public static BulletShape VerifyMeshCreated(BSScene physicsScene, BulletShape newShape, BSPhysObject prim)
+    {
+        // If the shape was successfully created, nothing more to do
+        if (newShape.HasPhysicalShape)
+            return newShape;
+
+        // VerifyMeshCreated is called after trying to create the mesh. If we think the asset had been
+        //    fetched but we end up here again, the meshing of the asset must have failed.
+        // Prevent trying to keep fetching the mesh by declaring failure.
+        if (prim.PrimAssetState == BSPhysObject.PrimAssetCondition.Fetched)
+        {
+            prim.PrimAssetState = BSPhysObject.PrimAssetCondition.FailedMeshing;
+            physicsScene.Logger.WarnFormat("{0} Fetched asset would not mesh. prim={1}, texture={2}",
+                                            LogHeader, UsefulPrimInfo(physicsScene, prim), prim.BaseShape.SculptTexture);
+            physicsScene.DetailLog("{0},BSShape.VerifyMeshCreated,setFailed,prim={1},tex={2}",
+                                            prim.LocalID, UsefulPrimInfo(physicsScene, prim), prim.BaseShape.SculptTexture);
+        }
+        else
+        {
+            // If this mesh has an underlying asset and we have not failed getting it before, fetch the asset
+            if (prim.BaseShape.SculptEntry
+                && !prim.AssetFailed()
+                && prim.PrimAssetState != BSPhysObject.PrimAssetCondition.Waiting
+                && prim.BaseShape.SculptTexture != OMV.UUID.Zero
+                )
+            {
+                physicsScene.DetailLog("{0},BSShape.VerifyMeshCreated,fetchAsset,objNam={1},tex={2}",
+                                            prim.LocalID, prim.PhysObjectName, prim.BaseShape.SculptTexture);
+                // Multiple requestors will know we're waiting for this asset
+                prim.PrimAssetState = BSPhysObject.PrimAssetCondition.Waiting;
+
+                BSPhysObject xprim = prim;
+                RequestAssetDelegate assetProvider = physicsScene.RequestAssetMethod;
+                if (assetProvider != null)
+                {
+                    BSPhysObject yprim = xprim; // probably not necessary, but, just in case.
+                    assetProvider(yprim.BaseShape.SculptTexture, delegate(AssetBase asset)
+                    {
+                        // physicsScene.DetailLog("{0},BSShape.VerifyMeshCreated,assetProviderCallback", xprim.LocalID);
+                        bool assetFound = false;
+                        string mismatchIDs = String.Empty;  // DEBUG DEBUG
+                        if (asset != null && yprim.BaseShape.SculptEntry)
+                        {
+                            if (yprim.BaseShape.SculptTexture.ToString() == asset.ID)
+                            {
+                                yprim.BaseShape.SculptData = asset.Data;
+                                // This will cause the prim to see that the filler shape is not the right
+                                //    one and try again to build the object.
+                                // No race condition with the normal shape setting since the rebuild is at taint time.
+                                yprim.PrimAssetState = BSPhysObject.PrimAssetCondition.Fetched;
+                                yprim.ForceBodyShapeRebuild(false /* inTaintTime */);
+                                assetFound = true;
+                            }
+                            else
+                            {
+                                mismatchIDs = yprim.BaseShape.SculptTexture.ToString() + "/" + asset.ID;
+                            }
+                        }
+                        if (!assetFound)
+                        {
+                            yprim.PrimAssetState = BSPhysObject.PrimAssetCondition.FailedAssetFetch;
+                        }
+                        physicsScene.DetailLog("{0},BSShape.VerifyMeshCreated,fetchAssetCallback,found={1},isSculpt={2},ids={3}",
+                                    yprim.LocalID, assetFound, yprim.BaseShape.SculptEntry, mismatchIDs );
+                    });
+                }
+                else
+                {
+                    xprim.PrimAssetState = BSPhysObject.PrimAssetCondition.FailedAssetFetch;
+                    physicsScene.Logger.ErrorFormat("{0} Physical object requires asset but no asset provider. Name={1}",
+                                                LogHeader, physicsScene.PhysicsSceneName);
+                }
+            }
+            else
+            {
+                if (prim.PrimAssetState == BSPhysObject.PrimAssetCondition.FailedAssetFetch)
+                {
+                    physicsScene.Logger.WarnFormat("{0} Mesh failed to fetch asset. prim={1}, texture={2}",
+                                                LogHeader, UsefulPrimInfo(physicsScene, prim), prim.BaseShape.SculptTexture);
+                    physicsScene.DetailLog("{0},BSShape.VerifyMeshCreated,wasFailed,prim={1},tex={2}",
+                                                prim.LocalID, UsefulPrimInfo(physicsScene, prim), prim.BaseShape.SculptTexture);
+                }
+                if (prim.PrimAssetState == BSPhysObject.PrimAssetCondition.FailedMeshing)
+                {
+                    physicsScene.Logger.WarnFormat("{0} Mesh asset would not mesh. prim={1}, texture={2}",
+                                                LogHeader, UsefulPrimInfo(physicsScene, prim), prim.BaseShape.SculptTexture);
+                    physicsScene.DetailLog("{0},BSShape.VerifyMeshCreated,wasFailedMeshing,prim={1},tex={2}",
+                                                prim.LocalID, UsefulPrimInfo(physicsScene, prim), prim.BaseShape.SculptTexture);
+                }
+            }
+         }
+
+        // While we wait for the mesh defining asset to be loaded, stick in a simple box for the object.
+        BSShape fillShape = BSShapeNative.GetReference(physicsScene, prim, BSPhysicsShapeType.SHAPE_BOX, FixedShapeKey.KEY_BOX);
+        physicsScene.DetailLog("{0},BSShape.VerifyMeshCreated,boxTempShape", prim.LocalID);
+
+        return fillShape.physShapeInfo;
+     }
+
+    public static String UsefulPrimInfo(BSScene pScene, BSPhysObject prim)
+    {
+        StringBuilder buff = new StringBuilder(prim.PhysObjectName);
+        buff.Append("/pos=");
+        buff.Append(prim.RawPosition.ToString());
+        if (pScene != null)
+        {
+            buff.Append("/rgn=");
+            buff.Append(pScene.PhysicsSceneName);
+        }
+        return buff.ToString();
+    }
+
+    #endregion // Common shape routines
+}
+
+// ============================================================================================================
+public class BSShapeNull : BSShape
+{
+    public BSShapeNull() : base()
+    {
+    }
+    public static BSShape GetReference() { return new BSShapeNull();  }
+    public override BSShape GetReference(BSScene pPhysicsScene, BSPhysObject pPrim) { return new BSShapeNull();  }
+    public override void Dereference(BSScene physicsScene) { /* The magic of garbage collection will make this go away */ }
+}
+
+// ============================================================================================================
+// BSShapeNative is a wrapper for a Bullet 'native' shape -- cube and sphere.
+// They are odd in that they don't allocate meshes but are computated/procedural.
+// This means allocation and freeing is different than meshes.
+public class BSShapeNative : BSShape
+{
+    private static string LogHeader = "[BULLETSIM SHAPE NATIVE]";
+    public BSShapeNative(BulletShape pShape) : base(pShape)
+    {
+    }
+
+    public static BSShape GetReference(BSScene physicsScene, BSPhysObject prim,
+                                            BSPhysicsShapeType shapeType, FixedShapeKey shapeKey)
+    {
+        // Native shapes are not shared and are always built anew.
+        return new BSShapeNative(CreatePhysicalNativeShape(physicsScene, prim, shapeType, shapeKey));
+    }
+
+    public override BSShape GetReference(BSScene pPhysicsScene, BSPhysObject pPrim)
+    {
+        // Native shapes are not shared so we return a new shape.
+        BSShape ret = null;
+        lock (physShapeInfo)
+        {
+            ret = new BSShapeNative(CreatePhysicalNativeShape(pPhysicsScene, pPrim,
+                                        physShapeInfo.shapeType, (FixedShapeKey)physShapeInfo.shapeKey));
+        }
+        return ret;
+    }
+
+    // Make this reference to the physical shape go away since native shapes are not shared.
+    public override void Dereference(BSScene physicsScene)
+    {
+        // Native shapes are not tracked and are released immediately
+        lock (physShapeInfo)
+        {
+            if (physShapeInfo.HasPhysicalShape)
+            {
+                physicsScene.DetailLog("{0},BSShapeNative.Dereference,deleteNativeShape,shape={1}", BSScene.DetailLogZero, this);
+                physicsScene.PE.DeleteCollisionShape(physicsScene.World, physShapeInfo);
+            }
+            physShapeInfo.Clear();
+            // Garbage collection will free up this instance.
+        }
+    }
+
+    private static BulletShape CreatePhysicalNativeShape(BSScene physicsScene, BSPhysObject prim,
+                                            BSPhysicsShapeType shapeType, FixedShapeKey shapeKey)
+    {
+        BulletShape newShape;
+
+        ShapeData nativeShapeData = new ShapeData();
+        nativeShapeData.Type = shapeType;
+        nativeShapeData.ID = prim.LocalID;
+        nativeShapeData.Scale = prim.Scale;
+        nativeShapeData.Size = prim.Scale;
+        nativeShapeData.MeshKey = (ulong)shapeKey;
+        nativeShapeData.HullKey = (ulong)shapeKey;
+
+        if (shapeType == BSPhysicsShapeType.SHAPE_CAPSULE)
+        {
+            newShape = physicsScene.PE.BuildCapsuleShape(physicsScene.World, 1f, 1f, prim.Scale);
+            physicsScene.DetailLog("{0},BSShapeNative,capsule,scale={1}", prim.LocalID, prim.Scale);
+        }
+        else
+        {
+            newShape = physicsScene.PE.BuildNativeShape(physicsScene.World, nativeShapeData);
+        }
+        if (!newShape.HasPhysicalShape)
+        {
+            physicsScene.Logger.ErrorFormat("{0} BuildPhysicalNativeShape failed. ID={1}, shape={2}",
+                                    LogHeader, prim.LocalID, shapeType);
+        }
+        newShape.shapeType = shapeType;
+        newShape.isNativeShape = true;
+        newShape.shapeKey = (UInt64)shapeKey;
+        return newShape;
+    }
+
+}
+
+// ============================================================================================================
+// BSShapeMesh is a simple mesh.
+public class BSShapeMesh : BSShape
+{
+    private static string LogHeader = "[BULLETSIM SHAPE MESH]";
+    public static Dictionary<System.UInt64, BSShapeMesh> Meshes = new Dictionary<System.UInt64, BSShapeMesh>();
+
+    public BSShapeMesh(BulletShape pShape) : base(pShape)
+    {
+    }
+    public static BSShape GetReference(BSScene physicsScene, bool forceRebuild, BSPhysObject prim)
+    {
+        float lod;
+        System.UInt64 newMeshKey = BSShape.ComputeShapeKey(prim.Size, prim.BaseShape, out lod);
+
+        BSShapeMesh retMesh = null;
+        lock (Meshes)
+        {
+            if (Meshes.TryGetValue(newMeshKey, out retMesh))
+            {
+                // The mesh has already been created. Return a new reference to same.
+                retMesh.IncrementReference();
+            }
+            else
+            {
+                retMesh = new BSShapeMesh(new BulletShape());
+                // An instance of this mesh has not been created. Build and remember same.
+                BulletShape newShape = retMesh.CreatePhysicalMesh(physicsScene, prim, newMeshKey, prim.BaseShape, prim.Size, lod);
+
+                // Check to see if mesh was created (might require an asset).
+                newShape = VerifyMeshCreated(physicsScene, newShape, prim);
+                if (!newShape.isNativeShape || prim.AssetFailed() )
+                {
+                    // If a mesh was what was created, remember the built shape for later sharing.
+                    // Also note that if meshing failed we put it in the mesh list as there is nothing else to do about the mesh.
+                    Meshes.Add(newMeshKey, retMesh);
+                }
+
+                retMesh.physShapeInfo = newShape;
+            }
+        }
+        physicsScene.DetailLog("{0},BSShapeMesh,getReference,mesh={1},size={2},lod={3}", prim.LocalID, retMesh, prim.Size, lod);
+        return retMesh;
+    }
+    public override BSShape GetReference(BSScene pPhysicsScene, BSPhysObject pPrim)
+    {
+        BSShape ret = null;
+        // If the underlying shape is native, the actual shape has not been build (waiting for asset)
+        //     and we must create a copy of the native shape since they are never shared.
+        if (physShapeInfo.HasPhysicalShape && physShapeInfo.isNativeShape)
+        {
+            // TODO: decide when the native shapes should be freed. Check in Dereference?
+            ret = BSShapeNative.GetReference(pPhysicsScene, pPrim, BSPhysicsShapeType.SHAPE_BOX, FixedShapeKey.KEY_BOX);
+        }
+        else
+        {
+            // Another reference to this shape is just counted.
+            IncrementReference();
+            ret = this;
+        }
+        return ret;
+    }
+    public override void Dereference(BSScene physicsScene)
+    {
+        lock (Meshes)
+        {
+            this.DecrementReference();
+            physicsScene.DetailLog("{0},BSShapeMesh.Dereference,shape={1}", BSScene.DetailLogZero, this);
+            // TODO: schedule aging and destruction of unused meshes.
+        }
+    }
+    // Loop through all the known meshes and return the description based on the physical address.
+    public static bool TryGetMeshByPtr(BulletShape pShape, out BSShapeMesh outMesh)
+    {
+        bool ret = false;
+        BSShapeMesh foundDesc = null;
+        lock (Meshes)
+        {
+            foreach (BSShapeMesh sm in Meshes.Values)
+            {
+                if (sm.physShapeInfo.ReferenceSame(pShape))
+                {
+                    foundDesc = sm;
+                    ret = true;
+                    break;
+                }
+
+            }
+        }
+        outMesh = foundDesc;
+        return ret;
+    }
+
+    public delegate BulletShape CreateShapeCall(BulletWorld world, int indicesCount, int[] indices, int verticesCount, float[] vertices );
+    private BulletShape CreatePhysicalMesh(BSScene physicsScene, BSPhysObject prim, System.UInt64 newMeshKey,
+                                            PrimitiveBaseShape pbs, OMV.Vector3 size, float lod)
+    {
+        return BSShapeMesh.CreatePhysicalMeshShape(physicsScene, prim, newMeshKey, pbs, size, lod,
+                            (w, iC, i, vC, v) =>
+                            {
+                                shapeInfo.Vertices = vC;
+                                return physicsScene.PE.CreateMeshShape(w, iC, i, vC, v);
+                            });
+    }
+
+    // Code that uses the mesher to create the index/vertices info for a trimesh shape.
+    // This is used by the passed 'makeShape' call to create the Bullet mesh shape.
+    // The actual build call is passed so this logic can be used by several of the shapes that use a
+    //     simple mesh as their base shape.
+    public static BulletShape CreatePhysicalMeshShape(BSScene physicsScene, BSPhysObject prim, System.UInt64 newMeshKey,
+                                            PrimitiveBaseShape pbs, OMV.Vector3 size, float lod, CreateShapeCall makeShape)
+    {
+        BulletShape newShape = new BulletShape();
+
+        IMesh meshData = null;
+        lock (physicsScene.mesher)
+        {
+            meshData = physicsScene.mesher.CreateMesh(prim.PhysObjectName, pbs, size, lod,
+                                            false,  // say it is not physical so a bounding box is not built
+                                            false   // do not cache the mesh and do not use previously built versions
+                                            );
+        }
+
+        if (meshData != null)
+        {
+            if (prim.PrimAssetState == BSPhysObject.PrimAssetCondition.Fetched)
+            {
+                // Release the fetched asset data once it has been used.
+                pbs.SculptData = new byte[0];
+                prim.PrimAssetState = BSPhysObject.PrimAssetCondition.Unknown;
+            }
+
+            int[] indices = meshData.getIndexListAsInt();
+            int realIndicesIndex = indices.Length;
+            float[] verticesAsFloats = meshData.getVertexListAsFloat();
+
+            if (BSParam.ShouldRemoveZeroWidthTriangles)
+            {
+                // Remove degenerate triangles. These are triangles with two of the vertices
+                //    are the same. This is complicated by the problem that vertices are not
+                //    made unique in sculpties so we have to compare the values in the vertex.
+                realIndicesIndex = 0;
+                for (int tri = 0; tri < indices.Length; tri += 3)
+                {
+                    // Compute displacements into vertex array for each vertex of the triangle
+                    int v1 = indices[tri + 0] * 3;
+                    int v2 = indices[tri + 1] * 3;
+                    int v3 = indices[tri + 2] * 3;
+                // Check to see if any two of the vertices are the same
+                    if (!( (  verticesAsFloats[v1 + 0] == verticesAsFloats[v2 + 0]
+                           && verticesAsFloats[v1 + 1] == verticesAsFloats[v2 + 1]
+                           && verticesAsFloats[v1 + 2] == verticesAsFloats[v2 + 2])
+                        || (  verticesAsFloats[v2 + 0] == verticesAsFloats[v3 + 0]
+                           && verticesAsFloats[v2 + 1] == verticesAsFloats[v3 + 1]
+                           && verticesAsFloats[v2 + 2] == verticesAsFloats[v3 + 2])
+                        || (  verticesAsFloats[v1 + 0] == verticesAsFloats[v3 + 0]
+                           && verticesAsFloats[v1 + 1] == verticesAsFloats[v3 + 1]
+                           && verticesAsFloats[v1 + 2] == verticesAsFloats[v3 + 2]) )
+                    )
+                    {
+                        // None of the vertices of the triangles are the same. This is a good triangle;
+                        indices[realIndicesIndex + 0] = indices[tri + 0];
+                        indices[realIndicesIndex + 1] = indices[tri + 1];
+                        indices[realIndicesIndex + 2] = indices[tri + 2];
+                        realIndicesIndex += 3;
+                    }
+                }
+            }
+            physicsScene.DetailLog("{0},BSShapeMesh.CreatePhysicalMesh,key={1},origTri={2},realTri={3},numVerts={4}",
+                        BSScene.DetailLogZero, newMeshKey.ToString("X"), indices.Length / 3, realIndicesIndex / 3, verticesAsFloats.Length / 3);
+
+            if (realIndicesIndex != 0)
+            {
+                newShape = makeShape(physicsScene.World, realIndicesIndex, indices, verticesAsFloats.Length / 3, verticesAsFloats);
+            }
+            else
+            {
+                // Force the asset condition to 'failed' so we won't try to keep fetching and processing this mesh.
+                prim.PrimAssetState = BSPhysObject.PrimAssetCondition.FailedMeshing;
+                physicsScene.Logger.DebugFormat("{0} All mesh triangles degenerate. Prim={1}", LogHeader, UsefulPrimInfo(physicsScene, prim) );
+                physicsScene.DetailLog("{0},BSShapeMesh.CreatePhysicalMesh,allDegenerate,key={1}", prim.LocalID, newMeshKey);
+            }
+        }
+        newShape.shapeKey = newMeshKey;
+
+        return newShape;
+    }
+}
+
+// ============================================================================================================
+// BSShapeHull is a physical shape representation htat is made up of many convex hulls.
+// The convex hulls are either supplied with the asset or are approximated by one of the
+//     convex hull creation routines (in OpenSim or in Bullet).
+public class BSShapeHull : BSShape
+{
+#pragma warning disable 414
+    private static string LogHeader = "[BULLETSIM SHAPE HULL]";
+#pragma warning restore 414
+
+    public static Dictionary<System.UInt64, BSShapeHull> Hulls = new Dictionary<System.UInt64, BSShapeHull>();
+
+
+    public BSShapeHull(BulletShape pShape) : base(pShape)
+    {
+    }
+    public static BSShape GetReference(BSScene physicsScene, bool forceRebuild, BSPhysObject prim)
+    {
+        float lod;
+        System.UInt64 newHullKey = BSShape.ComputeShapeKey(prim.Size, prim.BaseShape, out lod);
+
+        BSShapeHull retHull = null;
+        lock (Hulls)
+        {
+            if (Hulls.TryGetValue(newHullKey, out retHull))
+            {
+                // The mesh has already been created. Return a new reference to same.
+                retHull.IncrementReference();
+            }
+            else
+            {
+                retHull = new BSShapeHull(new BulletShape());
+                // An instance of this mesh has not been created. Build and remember same.
+                BulletShape newShape = retHull.CreatePhysicalHull(physicsScene, prim, newHullKey, prim.BaseShape, prim.Size, lod);
+
+                // Check to see if hull was created (might require an asset).
+                newShape = VerifyMeshCreated(physicsScene, newShape, prim);
+                if (!newShape.isNativeShape || prim.AssetFailed())
+                {
+                    // If a mesh was what was created, remember the built shape for later sharing.
+                    Hulls.Add(newHullKey, retHull);
+                }
+                retHull.physShapeInfo = newShape;
+            }
+        }
+        physicsScene.DetailLog("{0},BSShapeHull,getReference,hull={1},size={2},lod={3}", prim.LocalID, retHull, prim.Size, lod);
+        return retHull;
+    }
+    public override BSShape GetReference(BSScene pPhysicsScene, BSPhysObject pPrim)
+    {
+        BSShape ret = null;
+        // If the underlying shape is native, the actual shape has not been build (waiting for asset)
+        //     and we must create a copy of the native shape since they are never shared.
+        if (physShapeInfo.HasPhysicalShape && physShapeInfo.isNativeShape)
+        {
+            // TODO: decide when the native shapes should be freed. Check in Dereference?
+            ret = BSShapeNative.GetReference(pPhysicsScene, pPrim, BSPhysicsShapeType.SHAPE_BOX, FixedShapeKey.KEY_BOX);
+        }
+        else
+        {
+            // Another reference to this shape is just counted.
+            IncrementReference();
+            ret = this;
+        }
+        return ret;
+    }
+    public override void Dereference(BSScene physicsScene)
+    {
+        lock (Hulls)
+        {
+            this.DecrementReference();
+            physicsScene.DetailLog("{0},BSShapeHull.Dereference,shape={1}", BSScene.DetailLogZero, this);
+            // TODO: schedule aging and destruction of unused meshes.
+        }
+    }
+
+    List<ConvexResult> m_hulls;
+    private BulletShape CreatePhysicalHull(BSScene physicsScene, BSPhysObject prim, System.UInt64 newHullKey,
+                                            PrimitiveBaseShape pbs, OMV.Vector3 size, float lod)
+    {
+        BulletShape newShape = new BulletShape();
+
+        IMesh meshData = null;
+        List<List<OMV.Vector3>> allHulls = null;
+        lock (physicsScene.mesher)
+        {
+            // Pass true for physicalness as this prevents the creation of bounding box which is not needed
+            meshData = physicsScene.mesher.CreateMesh(prim.PhysObjectName, pbs, size, lod, true /* isPhysical */, false /* shouldCache */);
+
+            // If we should use the asset's hull info, fetch it out of the locked mesher
+            if (meshData != null && BSParam.ShouldUseAssetHulls)
+            {
+                Meshmerizer realMesher = physicsScene.mesher as Meshmerizer;
+                if (realMesher != null)
+                {
+                    allHulls = realMesher.GetConvexHulls(size);
+                }
+                if (allHulls == null)
+                {
+                    physicsScene.DetailLog("{0},BSShapeHull.CreatePhysicalHull,assetHulls,noAssetHull", prim.LocalID);
+                }
+            }
+        }
+
+        // If there is hull data in the mesh asset, build the hull from that
+        if (allHulls != null && BSParam.ShouldUseAssetHulls)
+        {
+            int hullCount = allHulls.Count;
+            shapeInfo.HullCount = hullCount;
+            int totalVertices = 1;      // include one for the count of the hulls
+            // Using the structure described for HACD hulls, create the memory sturcture
+            //     to pass the hull data to the creater.
+            foreach (List<OMV.Vector3> hullVerts in allHulls)
+            {
+                totalVertices += 4;                     // add four for the vertex count and centroid
+                totalVertices += hullVerts.Count * 3;   // one vertex is three dimensions
+            }
+            float[] convHulls = new float[totalVertices];
+
+            convHulls[0] = (float)hullCount;
+            int jj = 1;
+            int hullIndex = 0;
+            foreach (List<OMV.Vector3> hullVerts in allHulls)
+            {
+                convHulls[jj + 0] = hullVerts.Count;
+                convHulls[jj + 1] = 0f;   // centroid x,y,z
+                convHulls[jj + 2] = 0f;
+                convHulls[jj + 3] = 0f;
+                jj += 4;
+                foreach (OMV.Vector3 oneVert in hullVerts)
+                {
+                    convHulls[jj + 0] = oneVert.X;
+                    convHulls[jj + 1] = oneVert.Y;
+                    convHulls[jj + 2] = oneVert.Z;
+                    jj += 3;
+                }
+                shapeInfo.SetVerticesPerHull(hullIndex, hullVerts.Count);
+                hullIndex++;
+            }
+
+            // create the hull data structure in Bullet
+            newShape = physicsScene.PE.CreateHullShape(physicsScene.World, hullCount, convHulls);
+
+            physicsScene.DetailLog("{0},BSShapeHull.CreatePhysicalHull,assetHulls,hulls={1},totVert={2},shape={3}",
+                                        prim.LocalID, hullCount, totalVertices, newShape);
+        }
+
+        // If no hull specified in the asset and we should use Bullet's HACD approximation...
+        if (!newShape.HasPhysicalShape && BSParam.ShouldUseBulletHACD)
+        {
+            // Build the hull shape from an existing mesh shape.
+            // The mesh should have already been created in Bullet.
+            physicsScene.DetailLog("{0},BSShapeHull.CreatePhysicalHull,bulletHACD,entry", prim.LocalID);
+            BSShape meshShape = BSShapeMesh.GetReference(physicsScene, true, prim);
+
+            if (meshShape.physShapeInfo.HasPhysicalShape)
+            {
+                HACDParams parms = new HACDParams();
+                parms.maxVerticesPerHull = BSParam.BHullMaxVerticesPerHull;
+                parms.minClusters = BSParam.BHullMinClusters;
+                parms.compacityWeight = BSParam.BHullCompacityWeight;
+                parms.volumeWeight = BSParam.BHullVolumeWeight;
+                parms.concavity = BSParam.BHullConcavity;
+                parms.addExtraDistPoints = BSParam.NumericBool(BSParam.BHullAddExtraDistPoints);
+                parms.addNeighboursDistPoints = BSParam.NumericBool(BSParam.BHullAddNeighboursDistPoints);
+                parms.addFacesPoints = BSParam.NumericBool(BSParam.BHullAddFacesPoints);
+                parms.shouldAdjustCollisionMargin = BSParam.NumericBool(BSParam.BHullShouldAdjustCollisionMargin);
+                parms.whichHACD = 0;    // Use the HACD routine that comes with Bullet
+
+                physicsScene.DetailLog("{0},BSShapeHull.CreatePhysicalHull,hullFromMesh,beforeCall", prim.LocalID, newShape.HasPhysicalShape);
+                newShape = physicsScene.PE.BuildHullShapeFromMesh(physicsScene.World, meshShape.physShapeInfo, parms);
+                physicsScene.DetailLog("{0},BSShapeHull.CreatePhysicalHull,hullFromMesh,shape={1}", prim.LocalID, newShape);
+
+                // Now done with the mesh shape.
+                shapeInfo.HullCount = 1;
+                BSShapeMesh maybeMesh = meshShape as BSShapeMesh;
+                if (maybeMesh != null)
+                    shapeInfo.SetVerticesPerHull(0, maybeMesh.shapeInfo.Vertices);
+                meshShape.Dereference(physicsScene);
+            }
+            physicsScene.DetailLog("{0},BSShapeHull.CreatePhysicalHull,bulletHACD,exit,hasBody={1}", prim.LocalID, newShape.HasPhysicalShape);
+        }
+
+        // If no other hull specifications, use our HACD hull approximation.
+        if (!newShape.HasPhysicalShape && meshData != null)
+        {
+            if (prim.PrimAssetState == BSPhysObject.PrimAssetCondition.Fetched)
+            {
+                // Release the fetched asset data once it has been used.
+                pbs.SculptData = new byte[0];
+                prim.PrimAssetState = BSPhysObject.PrimAssetCondition.Unknown;
+            }
+
+            int[] indices = meshData.getIndexListAsInt();
+            List<OMV.Vector3> vertices = meshData.getVertexList();
+
+            //format conversion from IMesh format to DecompDesc format
+            List<int> convIndices = new List<int>();
+            List<float3> convVertices = new List<float3>();
+            for (int ii = 0; ii < indices.GetLength(0); ii++)
+            {
+                convIndices.Add(indices[ii]);
+            }
+            foreach (OMV.Vector3 vv in vertices)
+            {
+                convVertices.Add(new float3(vv.X, vv.Y, vv.Z));
+            }
+
+            uint maxDepthSplit = (uint)BSParam.CSHullMaxDepthSplit;
+            if (BSParam.CSHullMaxDepthSplit != BSParam.CSHullMaxDepthSplitForSimpleShapes)
+            {
+                // Simple primitive shapes we know are convex so they are better implemented with
+                //    fewer hulls.
+                // Check for simple shape (prim without cuts) and reduce split parameter if so.
+                if (BSShapeCollection.PrimHasNoCuts(pbs))
+                {
+                    maxDepthSplit = (uint)BSParam.CSHullMaxDepthSplitForSimpleShapes;
+                }
+            }
+
+            // setup and do convex hull conversion
+            m_hulls = new List<ConvexResult>();
+            DecompDesc dcomp = new DecompDesc();
+            dcomp.mIndices = convIndices;
+            dcomp.mVertices = convVertices;
+            dcomp.mDepth = maxDepthSplit;
+            dcomp.mCpercent = BSParam.CSHullConcavityThresholdPercent;
+            dcomp.mPpercent = BSParam.CSHullVolumeConservationThresholdPercent;
+            dcomp.mMaxVertices = (uint)BSParam.CSHullMaxVertices;
+            dcomp.mSkinWidth = BSParam.CSHullMaxSkinWidth;
+            ConvexBuilder convexBuilder = new ConvexBuilder(HullReturn);
+            // create the hull into the _hulls variable
+            convexBuilder.process(dcomp);
+
+            physicsScene.DetailLog("{0},BSShapeCollection.CreatePhysicalHull,key={1},inVert={2},inInd={3},split={4},hulls={5}",
+                                BSScene.DetailLogZero, newHullKey, indices.GetLength(0), vertices.Count, maxDepthSplit, m_hulls.Count);
+
+            // Convert the vertices and indices for passing to unmanaged.
+            // The hull information is passed as a large floating point array.
+            // The format is:
+            //  convHulls[0] = number of hulls
+            //  convHulls[1] = number of vertices in first hull
+            //  convHulls[2] = hull centroid X coordinate
+            //  convHulls[3] = hull centroid Y coordinate
+            //  convHulls[4] = hull centroid Z coordinate
+            //  convHulls[5] = first hull vertex X
+            //  convHulls[6] = first hull vertex Y
+            //  convHulls[7] = first hull vertex Z
+            //  convHulls[8] = second hull vertex X
+            //  ...
+            //  convHulls[n] = number of vertices in second hull
+            //  convHulls[n+1] = second hull centroid X coordinate
+            //  ...
+            //
+            // TODO: is is very inefficient. Someday change the convex hull generator to return
+            //   data structures that do not need to be converted in order to pass to Bullet.
+            //   And maybe put the values directly into pinned memory rather than marshaling.
+            int hullCount = m_hulls.Count;
+            int totalVertices = 1;          // include one for the count of the hulls
+            foreach (ConvexResult cr in m_hulls)
+            {
+                totalVertices += 4;                         // add four for the vertex count and centroid
+                totalVertices += cr.HullIndices.Count * 3;  // we pass just triangles
+            }
+            float[] convHulls = new float[totalVertices];
+
+            convHulls[0] = (float)hullCount;
+            int jj = 1;
+            foreach (ConvexResult cr in m_hulls)
+            {
+                // copy vertices for index access
+                float3[] verts = new float3[cr.HullVertices.Count];
+                int kk = 0;
+                foreach (float3 ff in cr.HullVertices)
+                {
+                    verts[kk++] = ff;
+                }
+
+                // add to the array one hull's worth of data
+                convHulls[jj++] = cr.HullIndices.Count;
+                convHulls[jj++] = 0f;   // centroid x,y,z
+                convHulls[jj++] = 0f;
+                convHulls[jj++] = 0f;
+                foreach (int ind in cr.HullIndices)
+                {
+                    convHulls[jj++] = verts[ind].x;
+                    convHulls[jj++] = verts[ind].y;
+                    convHulls[jj++] = verts[ind].z;
+                }
+            }
+            // create the hull data structure in Bullet
+            newShape = physicsScene.PE.CreateHullShape(physicsScene.World, hullCount, convHulls);
+        }
+        newShape.shapeKey = newHullKey;
+        return newShape;
+    }
+    // Callback from convex hull creater with a newly created hull.
+    // Just add it to our collection of hulls for this shape.
+    private void HullReturn(ConvexResult result)
+    {
+        m_hulls.Add(result);
+        return;
+    }
+    // Loop through all the known hulls and return the description based on the physical address.
+    public static bool TryGetHullByPtr(BulletShape pShape, out BSShapeHull outHull)
+    {
+        bool ret = false;
+        BSShapeHull foundDesc = null;
+        lock (Hulls)
+        {
+            foreach (BSShapeHull sh in Hulls.Values)
+            {
+                if (sh.physShapeInfo.ReferenceSame(pShape))
+                {
+                    foundDesc = sh;
+                    ret = true;
+                    break;
+                }
+
+            }
+        }
+        outHull = foundDesc;
+        return ret;
+    }
+}
+
+// ============================================================================================================
+// BSShapeCompound is a wrapper for the Bullet compound shape which is built from multiple, separate
+//    meshes. Used by BulletSim for complex shapes like linksets.
+public class BSShapeCompound : BSShape
+{
+    private static string LogHeader = "[BULLETSIM SHAPE COMPOUND]";
+    public static Dictionary<string, BSShapeCompound> CompoundShapes = new Dictionary<string, BSShapeCompound>();
+
+    public BSShapeCompound(BulletShape pShape) : base(pShape)
+    {
+    }
+    public static BSShape GetReference(BSScene physicsScene)
+    {
+        // Base compound shapes are not shared so this returns a raw shape.
+        // A built compound shape can be reused in linksets.
+        BSShapeCompound ret = new BSShapeCompound(CreatePhysicalCompoundShape(physicsScene));
+        CompoundShapes.Add(ret.AddrString, ret);
+        return ret;
+    }
+    public override BSShape GetReference(BSScene physicsScene, BSPhysObject prim)
+    {
+        // Calling this reference means we want another handle to an existing compound shape
+        //     (usually linksets) so return this copy.
+        IncrementReference();
+        return this;
+    }
+    // Dereferencing a compound shape releases the hold on all the child shapes.
+    public override void Dereference(BSScene physicsScene)
+    {
+        lock (physShapeInfo)
+        {
+            this.DecrementReference();
+            physicsScene.DetailLog("{0},BSShapeCompound.Dereference,shape={1}", BSScene.DetailLogZero, this);
+            if (referenceCount <= 0)
+            {
+                if (!physicsScene.PE.IsCompound(physShapeInfo))
+                {
+                    // Failed the sanity check!!
+                    physicsScene.Logger.ErrorFormat("{0} Attempt to free a compound shape that is not compound!! type={1}, ptr={2}",
+                                                LogHeader, physShapeInfo.shapeType, physShapeInfo.AddrString);
+                    physicsScene.DetailLog("{0},BSShapeCollection.DereferenceCompound,notACompoundShape,type={1},ptr={2}",
+                                                BSScene.DetailLogZero, physShapeInfo.shapeType, physShapeInfo.AddrString);
+                    return;
+                }
+
+                int numChildren = physicsScene.PE.GetNumberOfCompoundChildren(physShapeInfo);
+                physicsScene.DetailLog("{0},BSShapeCollection.DereferenceCompound,shape={1},children={2}",
+                                        BSScene.DetailLogZero, physShapeInfo, numChildren);
+
+                // Loop through all the children dereferencing each.
+                for (int ii = numChildren - 1; ii >= 0; ii--)
+                {
+                    BulletShape childShape = physicsScene.PE.RemoveChildShapeFromCompoundShapeIndex(physShapeInfo, ii);
+                    DereferenceAnonCollisionShape(physicsScene, childShape);
+                }
+
+                lock (CompoundShapes)
+                    CompoundShapes.Remove(physShapeInfo.AddrString);
+                physicsScene.PE.DeleteCollisionShape(physicsScene.World, physShapeInfo);
+            }
+        }
+    }
+    public static bool TryGetCompoundByPtr(BulletShape pShape, out BSShapeCompound outCompound)
+    {
+        lock (CompoundShapes)
+        {
+            string addr = pShape.AddrString;
+            return CompoundShapes.TryGetValue(addr, out outCompound);
+        }
+    }
+    private static BulletShape CreatePhysicalCompoundShape(BSScene physicsScene)
+    {
+        BulletShape cShape = physicsScene.PE.CreateCompoundShape(physicsScene.World, false);
+        return cShape;
+    }
+    // Sometimes we have a pointer to a collision shape but don't know what type it is.
+    // Figure out type and call the correct dereference routine.
+    // Called at taint-time.
+    private void DereferenceAnonCollisionShape(BSScene physicsScene, BulletShape pShape)
+    {
+        // TODO: figure a better way to go through all the shape types and find a possible instance.
+        physicsScene.DetailLog("{0},BSShapeCompound.DereferenceAnonCollisionShape,shape={1}",
+                                            BSScene.DetailLogZero, pShape);
+        BSShapeMesh meshDesc;
+        if (BSShapeMesh.TryGetMeshByPtr(pShape, out meshDesc))
+        {
+            meshDesc.Dereference(physicsScene);
+            // physicsScene.DetailLog("{0},BSShapeCompound.DereferenceAnonCollisionShape,foundMesh,shape={1}", BSScene.DetailLogZero, pShape);
+        }
+        else
+        {
+            BSShapeHull hullDesc;
+            if (BSShapeHull.TryGetHullByPtr(pShape, out hullDesc))
+            {
+                hullDesc.Dereference(physicsScene);
+                // physicsScene.DetailLog("{0},BSShapeCompound.DereferenceAnonCollisionShape,foundHull,shape={1}", BSScene.DetailLogZero, pShape);
+            }
+            else
+            {
+                BSShapeConvexHull chullDesc;
+                if (BSShapeConvexHull.TryGetConvexHullByPtr(pShape, out chullDesc))
+                {
+                    chullDesc.Dereference(physicsScene);
+                    // physicsScene.DetailLog("{0},BSShapeCompound.DereferenceAnonCollisionShape,foundConvexHull,shape={1}", BSScene.DetailLogZero, pShape);
+                }
+                else
+                {
+                    BSShapeGImpact gImpactDesc;
+                    if (BSShapeGImpact.TryGetGImpactByPtr(pShape, out gImpactDesc))
+                    {
+                        gImpactDesc.Dereference(physicsScene);
+                        // physicsScene.DetailLog("{0},BSShapeCompound.DereferenceAnonCollisionShape,foundgImpact,shape={1}", BSScene.DetailLogZero, pShape);
+                    }
+                    else
+                    {
+                        // Didn't find it in the lists of specific types. It could be compound.
+                        BSShapeCompound compoundDesc;
+                        if (BSShapeCompound.TryGetCompoundByPtr(pShape, out compoundDesc))
+                        {
+                            compoundDesc.Dereference(physicsScene);
+                            // physicsScene.DetailLog("{0},BSShapeCompound.DereferenceAnonCollisionShape,recursiveCompoundShape,shape={1}", BSScene.DetailLogZero, pShape);
+                        }
+                        else
+                        {
+                            // If none of the above, maybe it is a simple native shape.
+                            if (physicsScene.PE.IsNativeShape(pShape))
+                            {
+                                // physicsScene.DetailLog("{0},BSShapeCompound.DereferenceAnonCollisionShape,assumingNative,shape={1}", BSScene.DetailLogZero, pShape);
+                                BSShapeNative nativeShape = new BSShapeNative(pShape);
+                                nativeShape.Dereference(physicsScene);
+                            }
+                            else
+                            {
+                                physicsScene.Logger.WarnFormat("{0} DereferenceAnonCollisionShape. Did not find shape. {1}",
+                                    LogHeader, pShape);
+                            }
+                        }
+                    }
+                }
+            }
+        }
+    }
+}
+
+// ============================================================================================================
+// BSShapeConvexHull is a wrapper for a Bullet single convex hull. A BSShapeHull contains multiple convex
+//     hull shapes. This is used for simple prims that are convex and thus can be made into a simple
+//     collision shape (a single hull). More complex physical shapes will be BSShapeHull's.
+public class BSShapeConvexHull : BSShape
+{
+#pragma warning disable 414
+    private static string LogHeader = "[BULLETSIM SHAPE CONVEX HULL]";
+#pragma warning restore 414
+
+    public static Dictionary<System.UInt64, BSShapeConvexHull> ConvexHulls = new Dictionary<System.UInt64, BSShapeConvexHull>();
+
+    public BSShapeConvexHull(BulletShape pShape) : base(pShape)
+    {
+    }
+    public static BSShape GetReference(BSScene physicsScene, bool forceRebuild, BSPhysObject prim)
+    {
+        float lod;
+        System.UInt64 newMeshKey = BSShape.ComputeShapeKey(prim.Size, prim.BaseShape, out lod);
+
+        physicsScene.DetailLog("{0},BSShapeConvexHull,getReference,newKey={1},size={2},lod={3}",
+                                prim.LocalID, newMeshKey.ToString("X"), prim.Size, lod);
+
+        BSShapeConvexHull retConvexHull = null;
+        lock (ConvexHulls)
+        {
+            if (ConvexHulls.TryGetValue(newMeshKey, out retConvexHull))
+            {
+                // The mesh has already been created. Return a new reference to same.
+                retConvexHull.IncrementReference();
+            }
+            else
+            {
+                retConvexHull = new BSShapeConvexHull(new BulletShape());
+                BulletShape convexShape = null;
+
+                // Get a handle to a mesh to build the hull from
+                BSShape baseMesh = BSShapeMesh.GetReference(physicsScene, false /* forceRebuild */, prim);
+                if (baseMesh.physShapeInfo.isNativeShape)
+                {
+                    // We get here if the mesh was not creatable. Could be waiting for an asset from the disk.
+                    // In the short term, we return the native shape and a later ForceBodyShapeRebuild should
+                    //     get back to this code with a buildable mesh.
+                    // TODO: not sure the temp native shape is freed when the mesh is rebuilt. When does this get freed?
+                    convexShape = baseMesh.physShapeInfo;
+                }
+                else
+                {
+                    convexShape = physicsScene.PE.BuildConvexHullShapeFromMesh(physicsScene.World, baseMesh.physShapeInfo);
+                    convexShape.shapeKey = newMeshKey;
+                    ConvexHulls.Add(convexShape.shapeKey, retConvexHull);
+                    physicsScene.DetailLog("{0},BSShapeConvexHull.GetReference,addingNewlyCreatedShape,shape={1}",
+                                        BSScene.DetailLogZero, convexShape);
+                }
+
+                // Done with the base mesh
+                baseMesh.Dereference(physicsScene);
+
+                retConvexHull.physShapeInfo = convexShape;
+            }
+        }
+        return retConvexHull;
+    }
+    public override BSShape GetReference(BSScene physicsScene, BSPhysObject prim)
+    {
+        // Calling this reference means we want another handle to an existing shape
+        //     (usually linksets) so return this copy.
+        IncrementReference();
+        return this;
+    }
+    // Dereferencing a compound shape releases the hold on all the child shapes.
+    public override void Dereference(BSScene physicsScene)
+    {
+        lock (ConvexHulls)
+        {
+            this.DecrementReference();
+            physicsScene.DetailLog("{0},BSShapeConvexHull.Dereference,shape={1}", BSScene.DetailLogZero, this);
+            // TODO: schedule aging and destruction of unused meshes.
+        }
+    }
+    // Loop through all the known hulls and return the description based on the physical address.
+    public static bool TryGetConvexHullByPtr(BulletShape pShape, out BSShapeConvexHull outHull)
+    {
+        bool ret = false;
+        BSShapeConvexHull foundDesc = null;
+        lock (ConvexHulls)
+        {
+            foreach (BSShapeConvexHull sh in ConvexHulls.Values)
+            {
+                if (sh.physShapeInfo.ReferenceSame(pShape))
+                {
+                    foundDesc = sh;
+                    ret = true;
+                    break;
+                }
+
+            }
+        }
+        outHull = foundDesc;
+        return ret;
+    }
+}
+// ============================================================================================================
+// BSShapeGImpact is a wrapper for the Bullet GImpact shape which is a collision mesh shape that
+//     can handle concave as well as convex shapes. Much slower computationally but creates smoother
+//     shapes than multiple convex hull approximations.
+public class BSShapeGImpact : BSShape
+{
+#pragma warning disable 414
+    private static string LogHeader = "[BULLETSIM SHAPE GIMPACT]";
+#pragma warning restore 414
+
+    public static Dictionary<System.UInt64, BSShapeGImpact> GImpacts = new Dictionary<System.UInt64, BSShapeGImpact>();
+
+    public BSShapeGImpact(BulletShape pShape) : base(pShape)
+    {
+    }
+    public static BSShape GetReference(BSScene physicsScene, bool forceRebuild, BSPhysObject prim)
+    {
+        float lod;
+        System.UInt64 newMeshKey = BSShape.ComputeShapeKey(prim.Size, prim.BaseShape, out lod);
+
+        physicsScene.DetailLog("{0},BSShapeGImpact,getReference,newKey={1},size={2},lod={3}",
+                                prim.LocalID, newMeshKey.ToString("X"), prim.Size, lod);
+
+        BSShapeGImpact retGImpact = null;
+        lock (GImpacts)
+        {
+            if (GImpacts.TryGetValue(newMeshKey, out retGImpact))
+            {
+                // The mesh has already been created. Return a new reference to same.
+                retGImpact.IncrementReference();
+            }
+            else
+            {
+                retGImpact = new BSShapeGImpact(new BulletShape());
+                BulletShape newShape = retGImpact.CreatePhysicalGImpact(physicsScene, prim, newMeshKey, prim.BaseShape, prim.Size, lod);
+
+                // Check to see if mesh was created (might require an asset).
+                newShape = VerifyMeshCreated(physicsScene, newShape, prim);
+                newShape.shapeKey = newMeshKey;
+                if (!newShape.isNativeShape || prim.AssetFailed())
+                {
+                    // If a mesh was what was created, remember the built shape for later sharing.
+                    // Also note that if meshing failed we put it in the mesh list as there is nothing
+                    //         else to do about the mesh.
+                    GImpacts.Add(newMeshKey, retGImpact);
+                }
+
+                retGImpact.physShapeInfo = newShape;
+            }
+        }
+        return retGImpact;
+    }
+
+    private BulletShape CreatePhysicalGImpact(BSScene physicsScene, BSPhysObject prim, System.UInt64 newMeshKey,
+                                            PrimitiveBaseShape pbs, OMV.Vector3 size, float lod)
+    {
+        return BSShapeMesh.CreatePhysicalMeshShape(physicsScene, prim, newMeshKey, pbs, size, lod,
+                            (w, iC, i, vC, v) =>
+                            {
+                                shapeInfo.Vertices = vC;
+                                return physicsScene.PE.CreateGImpactShape(w, iC, i, vC, v);
+                            });
+    }
+
+    public override BSShape GetReference(BSScene pPhysicsScene, BSPhysObject pPrim)
+    {
+        BSShape ret = null;
+        // If the underlying shape is native, the actual shape has not been build (waiting for asset)
+        //     and we must create a copy of the native shape since they are never shared.
+        if (physShapeInfo.HasPhysicalShape && physShapeInfo.isNativeShape)
+        {
+            // TODO: decide when the native shapes should be freed. Check in Dereference?
+            ret = BSShapeNative.GetReference(pPhysicsScene, pPrim, BSPhysicsShapeType.SHAPE_BOX, FixedShapeKey.KEY_BOX);
+        }
+        else
+        {
+            // Another reference to this shape is just counted.
+            IncrementReference();
+            ret = this;
+        }
+        return ret;
+    }
+    // Dereferencing a compound shape releases the hold on all the child shapes.
+    public override void Dereference(BSScene physicsScene)
+    {
+        lock (GImpacts)
+        {
+            this.DecrementReference();
+            physicsScene.DetailLog("{0},BSShapeGImpact.Dereference,shape={1}", BSScene.DetailLogZero, this);
+            // TODO: schedule aging and destruction of unused meshes.
+        }
+    }
+    // Loop through all the known hulls and return the description based on the physical address.
+    public static bool TryGetGImpactByPtr(BulletShape pShape, out BSShapeGImpact outHull)
+    {
+        bool ret = false;
+        BSShapeGImpact foundDesc = null;
+        lock (GImpacts)
+        {
+            foreach (BSShapeGImpact sh in GImpacts.Values)
+            {
+                if (sh.physShapeInfo.ReferenceSame(pShape))
+                {
+                    foundDesc = sh;
+                    ret = true;
+                    break;
+                }
+
+            }
+        }
+        outHull = foundDesc;
+        return ret;
+    }
+}
+
+// ============================================================================================================
+// BSShapeAvatar is a specialized mesh shape for avatars.
+public class BSShapeAvatar : BSShape
+{
+#pragma warning disable 414
+    private static string LogHeader = "[BULLETSIM SHAPE AVATAR]";
+#pragma warning restore 414
+
+    public BSShapeAvatar()
+        : base()
+    {
+    }
+    public static BSShape GetReference(BSPhysObject prim)
+    {
+        return new BSShapeNull();
+    }
+    public override BSShape GetReference(BSScene pPhysicsScene, BSPhysObject pPrim)
+    {
+        return new BSShapeNull();
+    }
+    public override void Dereference(BSScene physicsScene) { }
+
+    // From the front:
+    //     A---A
+    //    /     \
+    //   B-------B
+    //  /         \        +Z
+    // C-----------C        |
+    // \           /   -Y --+-- +Y
+    //  \         /         |
+    //   \       /         -Z
+    //    D-----D
+    //     \   /
+    //      E-E
+
+    // From the top A and E are just lines.
+    //              B, C and D are hexagons:
+    //
+    //     C1--C2            +X
+    //    /      \            |
+    //  C0        C3     -Y --+-- +Y
+    //    \      /            |
+    //     C5--C4            -X
+
+    // Zero goes directly through the middle so the offsets are from that middle axis
+    //     and up and down from a middle horizon (A and E are the same distance from the zero).
+    // The height, width and depth is one. All scaling is done by the simulator.
+
+    // Z component -- how far the level is from the middle zero
+    private const float Aup = 0.5f;
+    private const float Bup = 0.4f;
+    private const float Cup = 0.3f;
+    private const float Dup = -0.4f;
+    private const float Eup = -0.5f;
+
+    // Y component -- distance from center to x0 and x3
+    private const float Awid = 0.25f;
+    private const float Bwid = 0.3f;
+    private const float Cwid = 0.5f;
+    private const float Dwid = 0.3f;
+    private const float Ewid = 0.2f;
+
+    // Y component -- distance from center to x1, x2, x4 and x5
+    private const float Afwid = 0.0f;
+    private const float Bfwid = 0.2f;
+    private const float Cfwid = 0.4f;
+    private const float Dfwid = 0.2f;
+    private const float Efwid = 0.0f;
+
+    // X component -- distance from zero to the front or back of a level
+    private const float Adep = 0f;
+    private const float Bdep = 0.3f;
+    private const float Cdep = 0.5f;
+    private const float Ddep = 0.2f;
+    private const float Edep = 0f;
+
+    private OMV.Vector3[] avatarVertices = {
+           new OMV.Vector3( 0.0f, -Awid,  Aup),   // A0
+           new OMV.Vector3( 0.0f, +Awid,  Aup),   // A3
+
+           new OMV.Vector3( 0.0f, -Bwid,  Bup),   // B0
+           new OMV.Vector3(+Bdep, -Bfwid, Bup),   // B1
+           new OMV.Vector3(+Bdep, +Bfwid, Bup),   // B2
+           new OMV.Vector3( 0.0f, +Bwid,  Bup),   // B3
+           new OMV.Vector3(-Bdep, +Bfwid, Bup),   // B4
+           new OMV.Vector3(-Bdep, -Bfwid, Bup),   // B5
+
+           new OMV.Vector3( 0.0f, -Cwid,  Cup),   // C0
+           new OMV.Vector3(+Cdep, -Cfwid, Cup),   // C1
+           new OMV.Vector3(+Cdep, +Cfwid, Cup),   // C2
+           new OMV.Vector3( 0.0f, +Cwid,  Cup),   // C3
+           new OMV.Vector3(-Cdep, +Cfwid, Cup),   // C4
+           new OMV.Vector3(-Cdep, -Cfwid, Cup),   // C5
+
+           new OMV.Vector3( 0.0f, -Dwid,  Dup),   // D0
+           new OMV.Vector3(+Ddep, -Dfwid, Dup),   // D1
+           new OMV.Vector3(+Ddep, +Dfwid, Dup),   // D2
+           new OMV.Vector3( 0.0f, +Dwid,  Dup),   // D3
+           new OMV.Vector3(-Ddep, +Dfwid, Dup),   // D4
+           new OMV.Vector3(-Ddep, -Dfwid, Dup),   // D5
+
+           new OMV.Vector3( 0.0f, -Ewid,  Eup),   // E0
+           new OMV.Vector3( 0.0f, +Ewid,  Eup),   // E3
+    };
+
+    // Offsets of the vertices in the vertices array
+    private enum Ind : int
+    {
+        A0, A3,
+        B0, B1, B2, B3, B4, B5,
+        C0, C1, C2, C3, C4, C5,
+        D0, D1, D2, D3, D4, D5,
+        E0, E3
+    }
+
+    // Comments specify trianges and quads in clockwise direction
+    private Ind[] avatarIndices = {
+        Ind.A0, Ind.B0, Ind.B1,                         // A0,B0,B1
+        Ind.A0, Ind.B1, Ind.B2, Ind.B2, Ind.A3, Ind.A0, // A0,B1,B2,A3
+        Ind.A3, Ind.B2, Ind.B3,                         // A3,B2,B3
+        Ind.A3, Ind.B3, Ind.B4,                         // A3,B3,B4
+        Ind.A3, Ind.B4, Ind.B5, Ind.B5, Ind.A0, Ind.A3, // A3,B4,B5,A0
+        Ind.A0, Ind.B5, Ind.B0,                         // A0,B5,B0
+
+        Ind.B0, Ind.C0, Ind.C1, Ind.C1, Ind.B1, Ind.B0, // B0,C0,C1,B1
+        Ind.B1, Ind.C1, Ind.C2, Ind.C2, Ind.B2, Ind.B1, // B1,C1,C2,B2
+        Ind.B2, Ind.C2, Ind.C3, Ind.C3, Ind.B3, Ind.B2, // B2,C2,C3,B3
+        Ind.B3, Ind.C3, Ind.C4, Ind.C4, Ind.B4, Ind.B3, // B3,C3,C4,B4
+        Ind.B4, Ind.C4, Ind.C5, Ind.C5, Ind.B5, Ind.B4, // B4,C4,C5,B5
+        Ind.B5, Ind.C5, Ind.C0, Ind.C0, Ind.B0, Ind.B5, // B5,C5,C0,B0
+
+        Ind.C0, Ind.D0, Ind.D1, Ind.D1, Ind.C1, Ind.C0, // C0,D0,D1,C1
+        Ind.C1, Ind.D1, Ind.D2, Ind.D2, Ind.C2, Ind.C1, // C1,D1,D2,C2
+        Ind.C2, Ind.D2, Ind.D3, Ind.D3, Ind.C3, Ind.C2, // C2,D2,D3,C3
+        Ind.C3, Ind.D3, Ind.D4, Ind.D4, Ind.C4, Ind.C3, // C3,D3,D4,C4
+        Ind.C4, Ind.D4, Ind.D5, Ind.D5, Ind.C5, Ind.C4, // C4,D4,D5,C5
+        Ind.C5, Ind.D5, Ind.D0, Ind.D0, Ind.C0, Ind.C5, // C5,D5,D0,C0
+
+        Ind.E0, Ind.D0, Ind.D1,                         // E0,D0,D1
+        Ind.E0, Ind.D1, Ind.D2, Ind.D2, Ind.E3, Ind.E0, // E0,D1,D2,E3
+        Ind.E3, Ind.D2, Ind.D3,                         // E3,D2,D3
+        Ind.E3, Ind.D3, Ind.D4,                         // E3,D3,D4
+        Ind.E3, Ind.D4, Ind.D5, Ind.D5, Ind.E0, Ind.E3, // E3,D4,D5,E0
+        Ind.E0, Ind.D5, Ind.D0,                         // E0,D5,D0
+
+    };
+
+}
+}
diff --git a/OpenSim/Region/PhysicsModules/BulletS/BSTerrainHeightmap.cs b/OpenSim/Region/PhysicsModules/BulletS/BSTerrainHeightmap.cs
new file mode 100755
index 0000000..42fc11b
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/BSTerrainHeightmap.cs
@@ -0,0 +1,169 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyrightD
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+using System;
+using System.Collections.Generic;
+using System.Text;
+
+using OpenSim.Framework;
+using OpenSim.Region.Framework;
+using OpenSim.Region.PhysicsModules.SharedBase;
+
+using Nini.Config;
+using log4net;
+
+using OpenMetaverse;
+
+namespace OpenSim.Region.PhysicsModule.BulletS
+{
+public sealed class BSTerrainHeightmap : BSTerrainPhys
+{
+    static string LogHeader = "[BULLETSIM TERRAIN HEIGHTMAP]";
+
+    BulletHMapInfo m_mapInfo = null;
+
+    // Constructor to build a default, flat heightmap terrain.
+    public BSTerrainHeightmap(BSScene physicsScene, Vector3 regionBase, uint id, Vector3 regionSize)
+        : base(physicsScene, regionBase, id)
+    {
+        Vector3 minTerrainCoords = new Vector3(0f, 0f, BSTerrainManager.HEIGHT_INITIALIZATION - BSTerrainManager.HEIGHT_EQUAL_FUDGE);
+        Vector3 maxTerrainCoords = new Vector3(regionSize.X, regionSize.Y, BSTerrainManager.HEIGHT_INITIALIZATION);
+        int totalHeights = (int)maxTerrainCoords.X * (int)maxTerrainCoords.Y;
+        float[] initialMap = new float[totalHeights];
+        for (int ii = 0; ii < totalHeights; ii++)
+        {
+            initialMap[ii] = BSTerrainManager.HEIGHT_INITIALIZATION;
+        }
+        m_mapInfo = new BulletHMapInfo(id, initialMap, regionSize.X, regionSize.Y);
+        m_mapInfo.minCoords = minTerrainCoords;
+        m_mapInfo.maxCoords = maxTerrainCoords;
+        m_mapInfo.terrainRegionBase = TerrainBase;
+        // Don't have to free any previous since we just got here.
+        BuildHeightmapTerrain();
+    }
+
+    // This minCoords and maxCoords passed in give the size of the terrain (min and max Z
+    //         are the high and low points of the heightmap).
+    public BSTerrainHeightmap(BSScene physicsScene, Vector3 regionBase, uint id, float[] initialMap,
+                                                    Vector3 minCoords, Vector3 maxCoords)
+        : base(physicsScene, regionBase, id)
+    {
+        m_mapInfo = new BulletHMapInfo(id, initialMap, maxCoords.X - minCoords.X, maxCoords.Y - minCoords.Y);
+        m_mapInfo.minCoords = minCoords;
+        m_mapInfo.maxCoords = maxCoords;
+        m_mapInfo.minZ = minCoords.Z;
+        m_mapInfo.maxZ = maxCoords.Z;
+        m_mapInfo.terrainRegionBase = TerrainBase;
+
+        // Don't have to free any previous since we just got here.
+        BuildHeightmapTerrain();
+    }
+
+    public override void Dispose()
+    {
+        ReleaseHeightMapTerrain();
+    }
+
+    // Using the information in m_mapInfo, create the physical representation of the heightmap.
+    private void BuildHeightmapTerrain()
+    {
+        // Create the terrain shape from the mapInfo
+        m_mapInfo.terrainShape = m_physicsScene.PE.CreateTerrainShape( m_mapInfo.ID,
+                                new Vector3(m_mapInfo.sizeX, m_mapInfo.sizeY, 0), m_mapInfo.minZ, m_mapInfo.maxZ,
+                                m_mapInfo.heightMap, 1f, BSParam.TerrainCollisionMargin);
+
+
+        // The terrain object initial position is at the center of the object
+        Vector3 centerPos;
+        centerPos.X = m_mapInfo.minCoords.X + (m_mapInfo.sizeX / 2f);
+        centerPos.Y = m_mapInfo.minCoords.Y + (m_mapInfo.sizeY / 2f);
+        centerPos.Z = m_mapInfo.minZ + ((m_mapInfo.maxZ - m_mapInfo.minZ) / 2f);
+
+        m_mapInfo.terrainBody = m_physicsScene.PE.CreateBodyWithDefaultMotionState(m_mapInfo.terrainShape,
+                                m_mapInfo.ID, centerPos, Quaternion.Identity);
+
+        // Set current terrain attributes
+        m_physicsScene.PE.SetFriction(m_mapInfo.terrainBody, BSParam.TerrainFriction);
+        m_physicsScene.PE.SetHitFraction(m_mapInfo.terrainBody, BSParam.TerrainHitFraction);
+        m_physicsScene.PE.SetRestitution(m_mapInfo.terrainBody, BSParam.TerrainRestitution);
+        m_physicsScene.PE.SetCollisionFlags(m_mapInfo.terrainBody, CollisionFlags.CF_STATIC_OBJECT);
+
+        m_mapInfo.terrainBody.collisionType = CollisionType.Terrain;
+
+        // Return the new terrain to the world of physical objects
+        m_physicsScene.PE.AddObjectToWorld(m_physicsScene.World, m_mapInfo.terrainBody);
+
+        // redo its bounding box now that it is in the world
+        m_physicsScene.PE.UpdateSingleAabb(m_physicsScene.World, m_mapInfo.terrainBody);
+
+        // Make it so the terrain will not move or be considered for movement.
+        m_physicsScene.PE.ForceActivationState(m_mapInfo.terrainBody, ActivationState.DISABLE_SIMULATION);
+
+        return;
+    }
+
+    // If there is information in m_mapInfo pointing to physical structures, release same.
+    private void ReleaseHeightMapTerrain()
+    {
+        if (m_mapInfo != null)
+        {
+            if (m_mapInfo.terrainBody.HasPhysicalBody)
+            {
+                m_physicsScene.PE.RemoveObjectFromWorld(m_physicsScene.World, m_mapInfo.terrainBody);
+                // Frees both the body and the shape.
+                m_physicsScene.PE.DestroyObject(m_physicsScene.World, m_mapInfo.terrainBody);
+            }
+        }
+        m_mapInfo = null;
+    }
+
+    // The passed position is relative to the base of the region.
+    public override float GetTerrainHeightAtXYZ(Vector3 pos)
+    {
+        float ret = BSTerrainManager.HEIGHT_GETHEIGHT_RET;
+
+        int mapIndex = (int)pos.Y * (int)m_mapInfo.sizeY + (int)pos.X;
+        try
+        {
+            ret = m_mapInfo.heightMap[mapIndex];
+        }
+        catch
+        {
+            // Sometimes they give us wonky values of X and Y. Give a warning and return something.
+            m_physicsScene.Logger.WarnFormat("{0} Bad request for terrain height. terrainBase={1}, pos={2}",
+                                LogHeader, m_mapInfo.terrainRegionBase, pos);
+            ret = BSTerrainManager.HEIGHT_GETHEIGHT_RET;
+        }
+        return ret;
+    }
+
+    // The passed position is relative to the base of the region.
+    public override float GetWaterLevelAtXYZ(Vector3 pos)
+    {
+        return m_physicsScene.SimpleWaterLevel;
+    }
+}
+}
diff --git a/OpenSim/Region/PhysicsModules/BulletS/BSTerrainManager.cs b/OpenSim/Region/PhysicsModules/BulletS/BSTerrainManager.cs
new file mode 100755
index 0000000..d11baa6
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/BSTerrainManager.cs
@@ -0,0 +1,584 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyrightD
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+using System;
+using System.Collections.Generic;
+using System.Text;
+
+using OpenSim.Framework;
+using OpenSim.Region.Framework;
+using OpenSim.Region.PhysicsModules.SharedBase;
+
+using Nini.Config;
+using log4net;
+
+using OpenMetaverse;
+
+namespace OpenSim.Region.PhysicsModule.BulletS
+{
+
+// The physical implementation of the terrain is wrapped in this class.
+public abstract class BSTerrainPhys : IDisposable
+{
+    public enum TerrainImplementation
+    {
+        Heightmap   = 0,
+        Mesh        = 1
+    }
+
+    protected BSScene m_physicsScene { get; private set; }
+    // Base of the region in world coordinates. Coordinates inside the region are relative to this.
+    public Vector3 TerrainBase { get; private set; }
+    public uint ID { get; private set; }
+
+    public BSTerrainPhys(BSScene physicsScene, Vector3 regionBase, uint id)
+    {
+        m_physicsScene = physicsScene;
+        TerrainBase = regionBase;
+        ID = id;
+    }
+    public abstract void Dispose();
+    public abstract float GetTerrainHeightAtXYZ(Vector3 pos);
+    public abstract float GetWaterLevelAtXYZ(Vector3 pos);
+}
+
+// ==========================================================================================
+public sealed class BSTerrainManager : IDisposable
+{
+    static string LogHeader = "[BULLETSIM TERRAIN MANAGER]";
+
+    // These height values are fractional so the odd values will be
+    //     noticable when debugging.
+    public const float HEIGHT_INITIALIZATION = 24.987f;
+    public const float HEIGHT_INITIAL_LASTHEIGHT = 24.876f;
+    public const float HEIGHT_GETHEIGHT_RET = 24.765f;
+    public const float WATER_HEIGHT_GETHEIGHT_RET = 19.998f;
+
+    // If the min and max height are equal, we reduce the min by this
+    //    amount to make sure that a bounding box is built for the terrain.
+    public const float HEIGHT_EQUAL_FUDGE = 0.2f;
+
+    // Until the whole simulator is changed to pass us the region size, we rely on constants.
+    public Vector3 DefaultRegionSize = new Vector3(Constants.RegionSize, Constants.RegionSize, Constants.RegionHeight);
+
+    // The scene that I am part of
+    private BSScene m_physicsScene { get; set; }
+
+    // The ground plane created to keep thing from falling to infinity.
+    private BulletBody m_groundPlane;
+
+    // If doing mega-regions, if we're region zero we will be managing multiple
+    //    region terrains since region zero does the physics for the whole mega-region.
+    private Dictionary<Vector3, BSTerrainPhys> m_terrains;
+
+    // Flags used to know when to recalculate the height.
+    private bool m_terrainModified = false;
+
+    // If we are doing mega-regions, terrains are added from TERRAIN_ID to m_terrainCount.
+    // This is incremented before assigning to new region so it is the last ID allocated.
+    private uint m_terrainCount = BSScene.CHILDTERRAIN_ID - 1;
+    public uint HighestTerrainID { get {return m_terrainCount; } }
+
+    // If doing mega-regions, this holds our offset from region zero of
+    //     the mega-regions. "parentScene" points to the PhysicsScene of region zero.
+    private Vector3 m_worldOffset;
+    // If the parent region (region 0), this is the extent of the combined regions
+    //     relative to the origin of region zero
+    private Vector3 m_worldMax;
+    private PhysicsScene MegaRegionParentPhysicsScene { get; set; }
+
+    public BSTerrainManager(BSScene physicsScene, Vector3 regionSize)
+    {
+        m_physicsScene = physicsScene;
+        DefaultRegionSize = regionSize;
+
+        m_terrains = new Dictionary<Vector3,BSTerrainPhys>();
+
+        // Assume one region of default size
+        m_worldOffset = Vector3.Zero;
+        m_worldMax = new Vector3(DefaultRegionSize);
+        MegaRegionParentPhysicsScene = null;
+    }
+
+    public void Dispose()
+    {
+        ReleaseGroundPlaneAndTerrain();
+    }
+
+    // Create the initial instance of terrain and the underlying ground plane.
+    // This is called from the initialization routine so we presume it is
+    //    safe to call Bullet in real time. We hope no one is moving prims around yet.
+    public void CreateInitialGroundPlaneAndTerrain()
+    {
+        DetailLog("{0},BSTerrainManager.CreateInitialGroundPlaneAndTerrain,region={1}", BSScene.DetailLogZero, m_physicsScene.RegionName);
+        // The ground plane is here to catch things that are trying to drop to negative infinity
+        BulletShape groundPlaneShape = m_physicsScene.PE.CreateGroundPlaneShape(BSScene.GROUNDPLANE_ID, 1f, BSParam.TerrainCollisionMargin);
+        Vector3 groundPlaneAltitude = new Vector3(0f, 0f, BSParam.TerrainGroundPlane);
+        m_groundPlane = m_physicsScene.PE.CreateBodyWithDefaultMotionState(groundPlaneShape,
+                                        BSScene.GROUNDPLANE_ID, groundPlaneAltitude, Quaternion.Identity);
+
+        // Everything collides with the ground plane.
+        m_groundPlane.collisionType = CollisionType.Groundplane;
+
+        m_physicsScene.PE.AddObjectToWorld(m_physicsScene.World, m_groundPlane);
+        m_physicsScene.PE.UpdateSingleAabb(m_physicsScene.World, m_groundPlane);
+
+        // Ground plane does not move
+        m_physicsScene.PE.ForceActivationState(m_groundPlane, ActivationState.DISABLE_SIMULATION);
+
+        BSTerrainPhys initialTerrain = new BSTerrainHeightmap(m_physicsScene, Vector3.Zero, BSScene.TERRAIN_ID, DefaultRegionSize);
+        lock (m_terrains)
+        {
+            // Build an initial terrain and put it in the world. This quickly gets replaced by the real region terrain.
+            m_terrains.Add(Vector3.Zero, initialTerrain);
+        }
+    }
+
+    // Release all the terrain structures we might have allocated
+    public void ReleaseGroundPlaneAndTerrain()
+    {
+        DetailLog("{0},BSTerrainManager.ReleaseGroundPlaneAndTerrain,region={1}", BSScene.DetailLogZero, m_physicsScene.RegionName);
+        if (m_groundPlane.HasPhysicalBody)
+        {
+            if (m_physicsScene.PE.RemoveObjectFromWorld(m_physicsScene.World, m_groundPlane))
+            {
+                m_physicsScene.PE.DestroyObject(m_physicsScene.World, m_groundPlane);
+            }
+            m_groundPlane.Clear();
+        }
+
+        ReleaseTerrain();
+    }
+
+    // Release all the terrain we have allocated
+    public void ReleaseTerrain()
+    {
+        lock (m_terrains)
+        {
+            foreach (KeyValuePair<Vector3, BSTerrainPhys> kvp in m_terrains)
+            {
+                kvp.Value.Dispose();
+            }
+            m_terrains.Clear();
+        }
+    }
+
+    // The simulator wants to set a new heightmap for the terrain.
+    public void SetTerrain(float[] heightMap) {
+        float[] localHeightMap = heightMap;
+        // If there are multiple requests for changes to the same terrain between ticks,
+        //      only do that last one.
+        m_physicsScene.PostTaintObject("TerrainManager.SetTerrain-"+ m_worldOffset.ToString(), 0, delegate()
+        {
+            if (m_worldOffset != Vector3.Zero && MegaRegionParentPhysicsScene != null)
+            {
+                // If a child of a mega-region, we shouldn't have any terrain allocated for us
+                ReleaseGroundPlaneAndTerrain();
+                // If doing the mega-prim stuff and we are the child of the zero region,
+                //    the terrain is added to our parent
+                if (MegaRegionParentPhysicsScene is BSScene)
+                {
+                    DetailLog("{0},SetTerrain.ToParent,offset={1},worldMax={2}", BSScene.DetailLogZero, m_worldOffset, m_worldMax);
+                    ((BSScene)MegaRegionParentPhysicsScene).TerrainManager.AddMegaRegionChildTerrain(
+                                        BSScene.CHILDTERRAIN_ID, localHeightMap, m_worldOffset, m_worldOffset + DefaultRegionSize);
+                }
+            }
+            else
+            {
+                // If not doing the mega-prim thing, just change the terrain
+                DetailLog("{0},SetTerrain.Existing", BSScene.DetailLogZero);
+
+                UpdateTerrain(BSScene.TERRAIN_ID, localHeightMap, m_worldOffset, m_worldOffset + DefaultRegionSize);
+            }
+        });
+    }
+
+    // Another region is calling this region and passing a terrain.
+    // A region that is not the mega-region root will pass its terrain to the root region so the root region
+    //      physics engine will have all the terrains.
+    private void AddMegaRegionChildTerrain(uint id, float[] heightMap, Vector3 minCoords, Vector3 maxCoords)
+    {
+        // Since we are called by another region's thread, the action must be rescheduled onto our processing thread.
+        m_physicsScene.PostTaintObject("TerrainManager.AddMegaRegionChild" + minCoords.ToString(), id, delegate()
+        {
+            UpdateTerrain(id, heightMap, minCoords, maxCoords);
+        });
+    }
+
+    // If called for terrain has has not been previously allocated, a new terrain will be built
+    //     based on the passed information. The 'id' should be either the terrain id or
+    //     BSScene.CHILDTERRAIN_ID. If the latter, a new child terrain ID will be allocated and used.
+    //     The latter feature is for creating child terrains for mega-regions.
+    // If there is an existing terrain body, a new
+    //     terrain shape is created and added to the body.
+    //     This call is most often used to update the heightMap and parameters of the terrain.
+    // (The above does suggest that some simplification/refactoring is in order.)
+    // Called during taint-time.
+    private void UpdateTerrain(uint id, float[] heightMap, Vector3 minCoords, Vector3 maxCoords)
+    {
+        // Find high and low points of passed heightmap.
+        // The min and max passed in is usually the area objects can be in (maximum
+        //     object height, for instance). The terrain wants the bounding box for the
+        //     terrain so replace passed min and max Z with the actual terrain min/max Z.
+        float minZ = float.MaxValue;
+        float maxZ = float.MinValue;
+        foreach (float height in heightMap)
+        {
+            if (height < minZ) minZ = height;
+            if (height > maxZ) maxZ = height;
+        }
+        if (minZ == maxZ)
+        {
+            // If min and max are the same, reduce min a little bit so a good bounding box is created.
+            minZ -= BSTerrainManager.HEIGHT_EQUAL_FUDGE;
+        }
+        minCoords.Z = minZ;
+        maxCoords.Z = maxZ;
+
+        DetailLog("{0},BSTerrainManager.UpdateTerrain,call,id={1},minC={2},maxC={3}",
+                            BSScene.DetailLogZero, id, minCoords, maxCoords);
+
+        Vector3 terrainRegionBase = new Vector3(minCoords.X, minCoords.Y, 0f);
+
+        lock (m_terrains)
+        {
+            BSTerrainPhys terrainPhys;
+            if (m_terrains.TryGetValue(terrainRegionBase, out terrainPhys))
+            {
+                // There is already a terrain in this spot. Free the old and build the new.
+                DetailLog("{0},BSTerrainManager.UpdateTerrain:UpdateExisting,call,id={1},base={2},minC={3},maxC={4}",
+                                BSScene.DetailLogZero, id, terrainRegionBase, minCoords, maxCoords);
+
+                // Remove old terrain from the collection
+                m_terrains.Remove(terrainRegionBase);
+                // Release any physical memory it may be using.
+                terrainPhys.Dispose();
+
+                if (MegaRegionParentPhysicsScene == null)
+                {
+                    // This terrain is not part of the mega-region scheme. Create vanilla terrain.
+                    BSTerrainPhys newTerrainPhys = BuildPhysicalTerrain(terrainRegionBase, id, heightMap, minCoords, maxCoords);
+                    m_terrains.Add(terrainRegionBase, newTerrainPhys);
+
+                    m_terrainModified = true;
+                }
+                else
+                {
+                    // It's possible that Combine() was called after this code was queued.
+                    // If we are a child of combined regions, we don't create any terrain for us.
+                    DetailLog("{0},BSTerrainManager.UpdateTerrain:AmACombineChild,taint", BSScene.DetailLogZero);
+
+                    // Get rid of any terrain that may have been allocated for us.
+                    ReleaseGroundPlaneAndTerrain();
+
+                    // I hate doing this, but just bail
+                    return;
+                }
+            }
+            else
+            {
+                // We don't know about this terrain so either we are creating a new terrain or
+                //    our mega-prim child is giving us a new terrain to add to the phys world
+
+                // if this is a child terrain, calculate a unique terrain id
+                uint newTerrainID = id;
+                if (newTerrainID >= BSScene.CHILDTERRAIN_ID)
+                    newTerrainID = ++m_terrainCount;
+
+                DetailLog("{0},BSTerrainManager.UpdateTerrain:NewTerrain,taint,newID={1},minCoord={2},maxCoord={3}",
+                                            BSScene.DetailLogZero, newTerrainID, minCoords, maxCoords);
+                BSTerrainPhys newTerrainPhys = BuildPhysicalTerrain(terrainRegionBase, id, heightMap, minCoords, maxCoords);
+                m_terrains.Add(terrainRegionBase, newTerrainPhys);
+
+                m_terrainModified = true;
+            }
+        }
+    }
+
+    // TODO: redo terrain implementation selection to allow other base types than heightMap.
+    private BSTerrainPhys BuildPhysicalTerrain(Vector3 terrainRegionBase, uint id, float[] heightMap, Vector3 minCoords, Vector3 maxCoords)
+    {
+        m_physicsScene.Logger.DebugFormat("{0} Terrain for {1}/{2} created with {3}",
+                                            LogHeader, m_physicsScene.RegionName, terrainRegionBase,
+                                            (BSTerrainPhys.TerrainImplementation)BSParam.TerrainImplementation);
+        BSTerrainPhys newTerrainPhys = null;
+        switch ((int)BSParam.TerrainImplementation)
+        {
+            case (int)BSTerrainPhys.TerrainImplementation.Heightmap:
+                newTerrainPhys = new BSTerrainHeightmap(m_physicsScene, terrainRegionBase, id,
+                                            heightMap, minCoords, maxCoords);
+                break;
+            case (int)BSTerrainPhys.TerrainImplementation.Mesh:
+                newTerrainPhys = new BSTerrainMesh(m_physicsScene, terrainRegionBase, id,
+                                            heightMap, minCoords, maxCoords);
+                break;
+            default:
+                m_physicsScene.Logger.ErrorFormat("{0} Bad terrain implementation specified. Type={1}/{2},Region={3}/{4}",
+                                            LogHeader,
+                                            (int)BSParam.TerrainImplementation,
+                                            BSParam.TerrainImplementation,
+                                            m_physicsScene.RegionName, terrainRegionBase);
+                break;
+        }
+        return newTerrainPhys;
+    }
+
+    // Return 'true' of this position is somewhere in known physical terrain space
+    public bool IsWithinKnownTerrain(Vector3 pos)
+    {
+        Vector3 terrainBaseXYZ;
+        BSTerrainPhys physTerrain;
+        return GetTerrainPhysicalAtXYZ(pos, out physTerrain, out terrainBaseXYZ);
+    }
+
+    // Return a new position that is over known terrain if the position is outside our terrain.
+    public Vector3 ClampPositionIntoKnownTerrain(Vector3 pPos)
+    {
+        float edgeEpsilon = 0.1f;
+
+        Vector3 ret = pPos;
+
+        // First, base addresses are never negative so correct for that possible problem.
+        if (ret.X < 0f || ret.Y < 0f)
+        {
+            ret.X = Util.Clamp<float>(ret.X, 0f, 1000000f);
+            ret.Y = Util.Clamp<float>(ret.Y, 0f, 1000000f);
+            DetailLog("{0},BSTerrainManager.ClampPositionToKnownTerrain,zeroingNegXorY,oldPos={1},newPos={2}",
+                                        BSScene.DetailLogZero, pPos, ret);
+        }
+
+        // Can't do this function if we don't know about any terrain.
+        if (m_terrains.Count == 0)
+            return ret;
+
+        int loopPrevention = 10;
+        Vector3 terrainBaseXYZ;
+        BSTerrainPhys physTerrain;
+        while (!GetTerrainPhysicalAtXYZ(ret, out physTerrain, out terrainBaseXYZ))
+        {
+            // The passed position is not within a known terrain area.
+            // NOTE that GetTerrainPhysicalAtXYZ will set 'terrainBaseXYZ' to the base of the unfound region.
+
+            // Must be off the top of a region. Find an adjacent region to move into.
+            //     The returned terrain is always 'lower'. That is, closer to <0,0>.
+            Vector3 adjacentTerrainBase = FindAdjacentTerrainBase(terrainBaseXYZ);
+
+            if (adjacentTerrainBase.X < terrainBaseXYZ.X)
+            {
+                // moving down into a new region in the X dimension. New position will be the max in the new base.
+                ret.X = adjacentTerrainBase.X + DefaultRegionSize.X - edgeEpsilon;
+            }
+            if (adjacentTerrainBase.Y < terrainBaseXYZ.Y)
+            {
+                // moving down into a new region in the X dimension. New position will be the max in the new base.
+                ret.Y = adjacentTerrainBase.Y + DefaultRegionSize.Y - edgeEpsilon;
+            }
+            DetailLog("{0},BSTerrainManager.ClampPositionToKnownTerrain,findingAdjacentRegion,adjacentRegBase={1},oldPos={2},newPos={3}",
+                                        BSScene.DetailLogZero, adjacentTerrainBase, pPos, ret);
+
+            if (loopPrevention-- < 0f)
+            {
+                // The 'while' is a little dangerous so this prevents looping forever if the
+                //    mapping of the terrains ever gets messed up (like nothing at <0,0>) or
+                //    the list of terrains is in transition.
+                DetailLog("{0},BSTerrainManager.ClampPositionToKnownTerrain,suppressingFindAdjacentRegionLoop", BSScene.DetailLogZero);
+                break;
+            }
+        }
+
+        return ret;
+    }
+
+    // Given an X and Y, find the height of the terrain.
+    // Since we could be handling multiple terrains for a mega-region,
+    //    the base of the region is calcuated assuming all regions are
+    //    the same size and that is the default.
+    // Once the heightMapInfo is found, we have all the information to
+    //    compute the offset into the array.
+    private float lastHeightTX = 999999f;
+    private float lastHeightTY = 999999f;
+    private float lastHeight = HEIGHT_INITIAL_LASTHEIGHT;
+    public float GetTerrainHeightAtXYZ(Vector3 pos)
+    {
+        float tX = pos.X;
+        float tY = pos.Y;
+        // You'd be surprized at the number of times this routine is called
+        //    with the same parameters as last time.
+        if (!m_terrainModified && (lastHeightTX == tX) && (lastHeightTY == tY))
+            return lastHeight;
+        m_terrainModified = false;
+
+        lastHeightTX = tX;
+        lastHeightTY = tY;
+        float ret = HEIGHT_GETHEIGHT_RET;
+
+        Vector3 terrainBaseXYZ;
+        BSTerrainPhys physTerrain;
+        if (GetTerrainPhysicalAtXYZ(pos, out physTerrain, out terrainBaseXYZ))
+        {
+            ret = physTerrain.GetTerrainHeightAtXYZ(pos - terrainBaseXYZ);
+        }
+        else
+        {
+            m_physicsScene.Logger.ErrorFormat("{0} GetTerrainHeightAtXY: terrain not found: region={1}, x={2}, y={3}",
+                    LogHeader, m_physicsScene.RegionName, tX, tY);
+            DetailLog("{0},BSTerrainManager.GetTerrainHeightAtXYZ,terrainNotFound,pos={1},base={2}",
+                                BSScene.DetailLogZero, pos, terrainBaseXYZ);
+        }
+
+        lastHeight = ret;
+        return ret;
+    }
+
+    public float GetWaterLevelAtXYZ(Vector3 pos)
+    {
+        float ret = WATER_HEIGHT_GETHEIGHT_RET;
+
+        Vector3 terrainBaseXYZ;
+        BSTerrainPhys physTerrain;
+        if (GetTerrainPhysicalAtXYZ(pos, out physTerrain, out terrainBaseXYZ))
+        {
+            ret = physTerrain.GetWaterLevelAtXYZ(pos);
+        }
+        else
+        {
+            m_physicsScene.Logger.ErrorFormat("{0} GetWaterHeightAtXY: terrain not found: pos={1}, terrainBase={2}, height={3}",
+                    LogHeader, m_physicsScene.RegionName, pos, terrainBaseXYZ, ret);
+        }
+        return ret;
+    }
+
+    // Given an address, return 'true' of there is a description of that terrain and output
+    //    the descriptor class and the 'base' fo the addresses therein.
+    private bool GetTerrainPhysicalAtXYZ(Vector3 pos, out BSTerrainPhys outPhysTerrain, out Vector3 outTerrainBase)
+    {
+        bool ret = false;
+
+        Vector3 terrainBaseXYZ = Vector3.Zero;
+        if (pos.X < 0f || pos.Y < 0f)
+        {
+            // We don't handle negative addresses so just make up a base that will not be found.
+            terrainBaseXYZ = new Vector3(-DefaultRegionSize.X, -DefaultRegionSize.Y, 0f);
+        }
+        else
+        {
+            int offsetX = ((int)(pos.X / (int)DefaultRegionSize.X)) * (int)DefaultRegionSize.X;
+            int offsetY = ((int)(pos.Y / (int)DefaultRegionSize.Y)) * (int)DefaultRegionSize.Y;
+            terrainBaseXYZ = new Vector3(offsetX, offsetY, 0f);
+        }
+
+        BSTerrainPhys physTerrain = null;
+        lock (m_terrains)
+        {
+            ret = m_terrains.TryGetValue(terrainBaseXYZ, out physTerrain);
+        }
+        outTerrainBase = terrainBaseXYZ;
+        outPhysTerrain = physTerrain;
+        return ret;
+    }
+
+    // Given a terrain base, return a terrain base for a terrain that is closer to <0,0> than
+    //   this one. Usually used to return an out of bounds object to a known place.
+    private Vector3 FindAdjacentTerrainBase(Vector3 pTerrainBase)
+    {
+        Vector3 ret = pTerrainBase;
+
+        // Can't do this function if we don't know about any terrain.
+        if (m_terrains.Count == 0)
+            return ret;
+
+        // Just some sanity
+        ret.X = Util.Clamp<float>(ret.X, 0f, 1000000f);
+        ret.Y = Util.Clamp<float>(ret.Y, 0f, 1000000f);
+        ret.Z = 0f;
+
+        lock (m_terrains)
+        {
+            // Once down to the <0,0> region, we have to be done.
+            while (ret.X > 0f || ret.Y > 0f)
+            {
+                if (ret.X > 0f)
+                {
+                    ret.X = Math.Max(0f, ret.X - DefaultRegionSize.X);
+                    DetailLog("{0},BSTerrainManager.FindAdjacentTerrainBase,reducingX,terrainBase={1}", BSScene.DetailLogZero, ret);
+                    if (m_terrains.ContainsKey(ret))
+                        break;
+                }
+                if (ret.Y > 0f)
+                {
+                    ret.Y = Math.Max(0f, ret.Y - DefaultRegionSize.Y);
+                    DetailLog("{0},BSTerrainManager.FindAdjacentTerrainBase,reducingY,terrainBase={1}", BSScene.DetailLogZero, ret);
+                    if (m_terrains.ContainsKey(ret))
+                        break;
+                }
+            }
+        }
+
+        return ret;
+    }
+
+    // Although no one seems to check this, I do support combining.
+    public bool SupportsCombining()
+    {
+        return true;
+    }
+
+    // This routine is called two ways:
+    //    One with 'offset' and 'pScene' zero and null but 'extents' giving the maximum
+    //        extent of the combined regions. This is to inform the parent of the size
+    //        of the combined regions.
+    //    and one with 'offset' as the offset of the child region to the base region,
+    //        'pScene' pointing to the parent and 'extents' of zero. This informs the
+    //        child of its relative base and new parent.
+    public void Combine(PhysicsScene pScene, Vector3 offset, Vector3 extents)
+    {
+        m_worldOffset = offset;
+        m_worldMax = extents;
+        MegaRegionParentPhysicsScene = pScene;
+        if (pScene != null)
+        {
+            // We are a child.
+            // We want m_worldMax to be the highest coordinate of our piece of terrain.
+            m_worldMax = offset + DefaultRegionSize;
+        }
+        DetailLog("{0},BSTerrainManager.Combine,offset={1},extents={2},wOffset={3},wMax={4}",
+                        BSScene.DetailLogZero, offset, extents, m_worldOffset, m_worldMax);
+    }
+
+    // Unhook all the combining that I know about.
+    public void UnCombine(PhysicsScene pScene)
+    {
+        // Just like ODE, we don't do anything yet.
+        DetailLog("{0},BSTerrainManager.UnCombine", BSScene.DetailLogZero);
+    }
+
+
+    private void DetailLog(string msg, params Object[] args)
+    {
+        m_physicsScene.PhysicsLogging.Write(msg, args);
+    }
+}
+}
diff --git a/OpenSim/Region/PhysicsModules/BulletS/BSTerrainMesh.cs b/OpenSim/Region/PhysicsModules/BulletS/BSTerrainMesh.cs
new file mode 100755
index 0000000..cd59b65
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/BSTerrainMesh.cs
@@ -0,0 +1,440 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyrightD
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+using System;
+using System.Collections.Generic;
+using System.Text;
+
+using OpenSim.Framework;
+using OpenSim.Region.Framework;
+using OpenSim.Region.PhysicsModules.SharedBase;
+
+using Nini.Config;
+using log4net;
+
+using OpenMetaverse;
+
+namespace OpenSim.Region.PhysicsModule.BulletS
+{
+public sealed class BSTerrainMesh : BSTerrainPhys
+{
+    static string LogHeader = "[BULLETSIM TERRAIN MESH]";
+
+    private float[] m_savedHeightMap;
+    int m_sizeX;
+    int m_sizeY;
+
+    BulletShape m_terrainShape;
+    BulletBody m_terrainBody;
+
+    public BSTerrainMesh(BSScene physicsScene, Vector3 regionBase, uint id, Vector3 regionSize)
+        : base(physicsScene, regionBase, id)
+    {
+    }
+
+    public BSTerrainMesh(BSScene physicsScene, Vector3 regionBase, uint id /* parameters for making mesh */)
+        : base(physicsScene, regionBase, id)
+    {
+    }
+
+    // Create terrain mesh from a heightmap.
+    public BSTerrainMesh(BSScene physicsScene, Vector3 regionBase, uint id, float[] initialMap,
+                                                    Vector3 minCoords, Vector3 maxCoords)
+        : base(physicsScene, regionBase, id)
+    {
+        int indicesCount;
+        int[] indices;
+        int verticesCount;
+        float[] vertices;
+
+        m_savedHeightMap = initialMap;
+
+        m_sizeX = (int)(maxCoords.X - minCoords.X);
+        m_sizeY = (int)(maxCoords.Y - minCoords.Y);
+
+        bool meshCreationSuccess = false;
+        if (BSParam.TerrainMeshMagnification == 1)
+        {
+            // If a magnification of one, use the old routine that is tried and true.
+            meshCreationSuccess = BSTerrainMesh.ConvertHeightmapToMesh(m_physicsScene,
+                                            initialMap, m_sizeX, m_sizeY,       // input size
+                                            Vector3.Zero,                       // base for mesh
+                                            out indicesCount, out indices, out verticesCount, out vertices);
+        }
+        else
+        {
+            // Other magnifications use the newer routine
+            meshCreationSuccess = BSTerrainMesh.ConvertHeightmapToMesh2(m_physicsScene,
+                                            initialMap, m_sizeX, m_sizeY,       // input size
+                                            BSParam.TerrainMeshMagnification,
+                                            physicsScene.TerrainManager.DefaultRegionSize,
+                                            Vector3.Zero,                       // base for mesh
+                                            out indicesCount, out indices, out verticesCount, out vertices);
+        }
+        if (!meshCreationSuccess)
+        {
+            // DISASTER!!
+            m_physicsScene.DetailLog("{0},BSTerrainMesh.create,failedConversionOfHeightmap,id={1}", BSScene.DetailLogZero, ID);
+            m_physicsScene.Logger.ErrorFormat("{0} Failed conversion of heightmap to mesh! base={1}", LogHeader, TerrainBase);
+            // Something is very messed up and a crash is in our future.
+            return;
+        }
+
+        m_physicsScene.DetailLog("{0},BSTerrainMesh.create,meshed,id={1},indices={2},indSz={3},vertices={4},vertSz={5}",
+                                BSScene.DetailLogZero, ID, indicesCount, indices.Length, verticesCount, vertices.Length);
+
+        m_terrainShape = m_physicsScene.PE.CreateMeshShape(m_physicsScene.World, indicesCount, indices, verticesCount, vertices);
+        if (!m_terrainShape.HasPhysicalShape)
+        {
+            // DISASTER!!
+            m_physicsScene.DetailLog("{0},BSTerrainMesh.create,failedCreationOfShape,id={1}", BSScene.DetailLogZero, ID);
+            m_physicsScene.Logger.ErrorFormat("{0} Failed creation of terrain mesh! base={1}", LogHeader, TerrainBase);
+            // Something is very messed up and a crash is in our future.
+            return;
+        }
+
+        Vector3 pos = regionBase;
+        Quaternion rot = Quaternion.Identity;
+
+        m_terrainBody = m_physicsScene.PE.CreateBodyWithDefaultMotionState(m_terrainShape, ID, pos, rot);
+        if (!m_terrainBody.HasPhysicalBody)
+        {
+            // DISASTER!!
+            m_physicsScene.Logger.ErrorFormat("{0} Failed creation of terrain body! base={1}", LogHeader, TerrainBase);
+            // Something is very messed up and a crash is in our future.
+            return;
+        }
+        physicsScene.PE.SetShapeCollisionMargin(m_terrainShape, BSParam.TerrainCollisionMargin);
+
+        // Set current terrain attributes
+        m_physicsScene.PE.SetFriction(m_terrainBody, BSParam.TerrainFriction);
+        m_physicsScene.PE.SetHitFraction(m_terrainBody, BSParam.TerrainHitFraction);
+        m_physicsScene.PE.SetRestitution(m_terrainBody, BSParam.TerrainRestitution);
+        m_physicsScene.PE.SetContactProcessingThreshold(m_terrainBody, BSParam.TerrainContactProcessingThreshold);
+        m_physicsScene.PE.SetCollisionFlags(m_terrainBody, CollisionFlags.CF_STATIC_OBJECT);
+
+        // Static objects are not very massive.
+        m_physicsScene.PE.SetMassProps(m_terrainBody, 0f, Vector3.Zero);
+
+        // Put the new terrain to the world of physical objects
+        m_physicsScene.PE.AddObjectToWorld(m_physicsScene.World, m_terrainBody);
+
+        // Redo its bounding box now that it is in the world
+        m_physicsScene.PE.UpdateSingleAabb(m_physicsScene.World, m_terrainBody);
+
+        m_terrainBody.collisionType = CollisionType.Terrain;
+        m_terrainBody.ApplyCollisionMask(m_physicsScene);
+
+        if (BSParam.UseSingleSidedMeshes)
+        {
+            m_physicsScene.DetailLog("{0},BSTerrainMesh.settingCustomMaterial,id={1}", BSScene.DetailLogZero, id);
+            m_physicsScene.PE.AddToCollisionFlags(m_terrainBody, CollisionFlags.CF_CUSTOM_MATERIAL_CALLBACK);
+        }
+
+        // Make it so the terrain will not move or be considered for movement.
+        m_physicsScene.PE.ForceActivationState(m_terrainBody, ActivationState.DISABLE_SIMULATION);
+    }
+
+    public override void Dispose()
+    {
+        if (m_terrainBody.HasPhysicalBody)
+        {
+            m_physicsScene.PE.RemoveObjectFromWorld(m_physicsScene.World, m_terrainBody);
+            // Frees both the body and the shape.
+            m_physicsScene.PE.DestroyObject(m_physicsScene.World, m_terrainBody);
+            m_terrainBody.Clear();
+            m_terrainShape.Clear();
+        }
+    }
+
+    public override float GetTerrainHeightAtXYZ(Vector3 pos)
+    {
+        // For the moment use the saved heightmap to get the terrain height.
+        // TODO: raycast downward to find the true terrain below the position.
+        float ret = BSTerrainManager.HEIGHT_GETHEIGHT_RET;
+
+        int mapIndex = (int)pos.Y * m_sizeY + (int)pos.X;
+        try
+        {
+            ret = m_savedHeightMap[mapIndex];
+        }
+        catch
+        {
+            // Sometimes they give us wonky values of X and Y. Give a warning and return something.
+            m_physicsScene.Logger.WarnFormat("{0} Bad request for terrain height. terrainBase={1}, pos={2}",
+                                                LogHeader, TerrainBase, pos);
+            ret = BSTerrainManager.HEIGHT_GETHEIGHT_RET;
+        }
+        return ret;
+    }
+
+    // The passed position is relative to the base of the region.
+    public override float GetWaterLevelAtXYZ(Vector3 pos)
+    {
+        return m_physicsScene.SimpleWaterLevel;
+    }
+
+    // Convert the passed heightmap to mesh information suitable for CreateMeshShape2().
+    // Return 'true' if successfully created.
+    public static bool ConvertHeightmapToMesh( BSScene physicsScene,
+                                float[] heightMap, int sizeX, int sizeY,    // parameters of incoming heightmap
+                                Vector3 extentBase,                         // base to be added to all vertices
+                                out int indicesCountO, out int[] indicesO,
+                                out int verticesCountO, out float[] verticesO)
+    {
+        bool ret = false;
+
+        int indicesCount = 0;
+        int verticesCount = 0;
+        int[] indices = new int[0];
+        float[] vertices = new float[0];
+
+        // Simple mesh creation which assumes magnification == 1.
+        // TODO: do a more general solution that scales, adds new vertices and smoothes the result.
+
+        // Create an array of vertices that is sizeX+1 by sizeY+1 (note the loop
+        //    from zero to <= sizeX). The triangle indices are then generated as two triangles
+        //    per heightmap point. There are sizeX by sizeY of these squares. The extra row and
+        //    column of vertices are used to complete the triangles of the last row and column
+        //    of the heightmap.
+        try
+        {
+            // One vertice per heightmap value plus the vertices off the side and bottom edge.
+            int totalVertices = (sizeX + 1) * (sizeY + 1);
+            vertices = new float[totalVertices * 3];
+            int totalIndices = sizeX * sizeY * 6;
+            indices = new int[totalIndices];
+
+            if (physicsScene != null)
+                physicsScene.DetailLog("{0},BSTerrainMesh.ConvertHeightMapToMesh,totVert={1},totInd={2},extentBase={3}",
+                                    BSScene.DetailLogZero, totalVertices, totalIndices, extentBase);
+            float minHeight = float.MaxValue;
+            // Note that sizeX+1 vertices are created since there is land between this and the next region.
+            for (int yy = 0; yy <= sizeY; yy++)
+            {
+                for (int xx = 0; xx <= sizeX; xx++)     // Hint: the "<=" means we go around sizeX + 1 times
+                {
+                    int offset = yy * sizeX + xx;
+                    // Extend the height with the height from the last row or column
+                    if (yy == sizeY) offset -= sizeX;
+                    if (xx == sizeX) offset -= 1;
+                    float height = heightMap[offset];
+                    minHeight = Math.Min(minHeight, height);
+                    vertices[verticesCount + 0] = (float)xx + extentBase.X;
+                    vertices[verticesCount + 1] = (float)yy + extentBase.Y;
+                    vertices[verticesCount + 2] = height + extentBase.Z;
+                    verticesCount += 3;
+                }
+            }
+            verticesCount = verticesCount / 3;
+
+            for (int yy = 0; yy < sizeY; yy++)
+            {
+                for (int xx = 0; xx < sizeX; xx++)
+                {
+                    int offset = yy * (sizeX + 1) + xx;
+                    // Each vertices is presumed to be the upper left corner of a box of two triangles
+                    indices[indicesCount + 0] = offset;
+                    indices[indicesCount + 1] = offset + 1;
+                    indices[indicesCount + 2] = offset + sizeX + 1; // accounting for the extra column
+                    indices[indicesCount + 3] = offset + 1;
+                    indices[indicesCount + 4] = offset + sizeX + 2;
+                    indices[indicesCount + 5] = offset + sizeX + 1;
+                    indicesCount += 6;
+                }
+            }
+
+            ret = true;
+        }
+        catch (Exception e)
+        {
+            if (physicsScene != null)
+                physicsScene.Logger.ErrorFormat("{0} Failed conversion of heightmap to mesh. For={1}/{2}, e={3}",
+                                                LogHeader, physicsScene.RegionName, extentBase, e);
+        }
+
+        indicesCountO = indicesCount;
+        indicesO = indices;
+        verticesCountO = verticesCount;
+        verticesO = vertices;
+
+        return ret;
+    }
+
+    private class HeightMapGetter
+    {
+        private float[] m_heightMap;
+        private int m_sizeX;
+        private int m_sizeY;
+        public HeightMapGetter(float[] pHeightMap, int pSizeX, int pSizeY)
+        {
+            m_heightMap = pHeightMap;
+            m_sizeX = pSizeX;
+            m_sizeY = pSizeY;
+        }
+        // The heightmap is extended as an infinite plane at the last height
+        public float GetHeight(int xx, int yy)
+        {
+            int offset = 0;
+            // Extend the height with the height from the last row or column
+            if (yy >= m_sizeY)
+                if (xx >= m_sizeX)
+                    offset = (m_sizeY - 1) * m_sizeX + (m_sizeX - 1);
+                else
+                    offset = (m_sizeY - 1) * m_sizeX + xx;
+            else
+                if (xx >= m_sizeX)
+                    offset = yy * m_sizeX + (m_sizeX - 1);
+                else
+                    offset = yy * m_sizeX + xx;
+
+            return m_heightMap[offset];
+        }
+    }
+
+    // Convert the passed heightmap to mesh information suitable for CreateMeshShape2().
+    // Version that handles magnification.
+    // Return 'true' if successfully created.
+    public static bool ConvertHeightmapToMesh2( BSScene physicsScene,
+                                float[] heightMap, int sizeX, int sizeY,    // parameters of incoming heightmap
+                                int magnification,                          // number of vertices per heighmap step
+                                Vector3 extent,                             // dimensions of the output mesh
+                                Vector3 extentBase,                         // base to be added to all vertices
+                                out int indicesCountO, out int[] indicesO,
+                                out int verticesCountO, out float[] verticesO)
+    {
+        bool ret = false;
+
+        int indicesCount = 0;
+        int verticesCount = 0;
+        int[] indices = new int[0];
+        float[] vertices = new float[0];
+
+        HeightMapGetter hmap = new HeightMapGetter(heightMap, sizeX, sizeY);
+
+        // The vertices dimension of the output mesh
+        int meshX = sizeX * magnification;
+        int meshY = sizeY * magnification;
+        // The output size of one mesh step
+        float meshXStep = extent.X / meshX;
+        float meshYStep = extent.Y / meshY;
+
+        // Create an array of vertices that is meshX+1 by meshY+1 (note the loop
+        //    from zero to <= meshX). The triangle indices are then generated as two triangles
+        //    per heightmap point. There are meshX by meshY of these squares. The extra row and
+        //    column of vertices are used to complete the triangles of the last row and column
+        //    of the heightmap.
+        try
+        {
+            // Vertices for the output heightmap plus one on the side and bottom to complete triangles
+            int totalVertices = (meshX + 1) * (meshY + 1);
+            vertices = new float[totalVertices * 3];
+            int totalIndices = meshX * meshY * 6;
+            indices = new int[totalIndices];
+
+            if (physicsScene != null)
+                physicsScene.DetailLog("{0},BSTerrainMesh.ConvertHeightMapToMesh2,inSize={1},outSize={2},totVert={3},totInd={4},extentBase={5}",
+                                    BSScene.DetailLogZero, new Vector2(sizeX, sizeY), new Vector2(meshX, meshY),
+                                    totalVertices, totalIndices, extentBase);
+
+            float minHeight = float.MaxValue;
+            // Note that sizeX+1 vertices are created since there is land between this and the next region.
+            // Loop through the output vertices and compute the mediun height in between the input vertices
+            for (int yy = 0; yy <= meshY; yy++)
+            {
+                for (int xx = 0; xx <= meshX; xx++)     // Hint: the "<=" means we go around sizeX + 1 times
+                {
+                    float offsetY = (float)yy * (float)sizeY / (float)meshY;     // The Y that is closest to the mesh point
+                    int stepY = (int)offsetY;
+                    float fractionalY = offsetY - (float)stepY;
+                    float offsetX = (float)xx * (float)sizeX / (float)meshX;     // The X that is closest to the mesh point
+                    int stepX = (int)offsetX;
+                    float fractionalX = offsetX - (float)stepX;
+
+                    // physicsScene.DetailLog("{0},BSTerrainMesh.ConvertHeightMapToMesh2,xx={1},yy={2},offX={3},stepX={4},fractX={5},offY={6},stepY={7},fractY={8}",
+                    //                 BSScene.DetailLogZero, xx, yy, offsetX, stepX, fractionalX, offsetY, stepY, fractionalY);
+
+                    // get the four corners of the heightmap square the mesh point is in
+                    float heightUL = hmap.GetHeight(stepX    , stepY    );
+                    float heightUR = hmap.GetHeight(stepX + 1, stepY    );
+                    float heightLL = hmap.GetHeight(stepX    , stepY + 1);
+                    float heightLR = hmap.GetHeight(stepX + 1, stepY + 1);
+
+                    // bilinear interplolation
+                    float height = heightUL * (1 - fractionalX) * (1 - fractionalY)
+                                 + heightUR * fractionalX       * (1 - fractionalY)
+                                 + heightLL * (1 - fractionalX) * fractionalY
+                                 + heightLR * fractionalX       * fractionalY;
+
+                    // physicsScene.DetailLog("{0},BSTerrainMesh.ConvertHeightMapToMesh2,heightUL={1},heightUR={2},heightLL={3},heightLR={4},heightMap={5}",
+                    //                 BSScene.DetailLogZero, heightUL, heightUR, heightLL, heightLR, height);
+
+                    minHeight = Math.Min(minHeight, height);
+
+                    vertices[verticesCount + 0] = (float)xx * meshXStep + extentBase.X;
+                    vertices[verticesCount + 1] = (float)yy * meshYStep + extentBase.Y;
+                    vertices[verticesCount + 2] = height + extentBase.Z;
+                    verticesCount += 3;
+                }
+            }
+            // The number of vertices generated
+            verticesCount /= 3;
+
+            // Loop through all the heightmap squares and create indices for the two triangles for that square
+            for (int yy = 0; yy < meshY; yy++)
+            {
+                for (int xx = 0; xx < meshX; xx++)
+                {
+                    int offset = yy * (meshX + 1) + xx;
+                    // Each vertices is presumed to be the upper left corner of a box of two triangles
+                    indices[indicesCount + 0] = offset;
+                    indices[indicesCount + 1] = offset + 1;
+                    indices[indicesCount + 2] = offset + meshX + 1; // accounting for the extra column
+                    indices[indicesCount + 3] = offset + 1;
+                    indices[indicesCount + 4] = offset + meshX + 2;
+                    indices[indicesCount + 5] = offset + meshX + 1;
+                    indicesCount += 6;
+                }
+            }
+
+            ret = true;
+        }
+        catch (Exception e)
+        {
+            if (physicsScene != null)
+                physicsScene.Logger.ErrorFormat("{0} Failed conversion of heightmap to mesh. For={1}/{2}, e={3}",
+                                                LogHeader, physicsScene.RegionName, extentBase, e);
+        }
+
+        indicesCountO = indicesCount;
+        indicesO = indices;
+        verticesCountO = verticesCount;
+        verticesO = vertices;
+
+        return ret;
+    }
+}
+}
diff --git a/OpenSim/Region/PhysicsModules/BulletS/BulletSimData.cs b/OpenSim/Region/PhysicsModules/BulletS/BulletSimData.cs
new file mode 100755
index 0000000..3329395
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/BulletSimData.cs
@@ -0,0 +1,277 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyrightD
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+using System;
+using System.Collections.Generic;
+using System.Text;
+using OMV = OpenMetaverse;
+
+namespace OpenSim.Region.PhysicsModule.BulletS
+{
+// Classes to allow some type checking for the API
+// These hold pointers to allocated objects in the unmanaged space.
+// These classes are subclassed by the various physical implementations of
+// objects. In particular, there is a version for physical instances in
+// unmanaged memory ("unman") and one for in managed memory ("XNA").
+
+// Currently, the instances of these classes are a reference to a
+// physical representation and this has no releationship to other
+// instances. Someday, refarb the usage of these classes so each instance
+// refers to a particular physical instance and this class controls reference
+// counts and such. This should be done along with adding BSShapes.
+
+public class BulletWorld
+{
+    public BulletWorld(uint worldId, BSScene bss)
+    {
+        worldID = worldId;
+        physicsScene = bss;
+    }
+    public uint worldID;
+    // The scene is only in here so very low level routines have a handle to print debug/error messages
+    public BSScene physicsScene;
+}
+
+// An allocated Bullet btRigidBody
+public class BulletBody
+{
+    public BulletBody(uint id)
+    {
+        ID = id;
+        collisionType = CollisionType.Static;
+    }
+    public uint ID;
+    public CollisionType collisionType;
+
+    public virtual void Clear() { }
+    public virtual bool HasPhysicalBody { get { return false; } }
+
+    // Apply the specificed collision mask into the physical world
+    public virtual bool ApplyCollisionMask(BSScene physicsScene)
+    {
+        // Should assert the body has been added to the physical world.
+        // (The collision masks are stored in the collision proxy cache which only exists for
+        //    a collision body that is in the world.)
+        return physicsScene.PE.SetCollisionGroupMask(this,
+                                BulletSimData.CollisionTypeMasks[collisionType].group,
+                                BulletSimData.CollisionTypeMasks[collisionType].mask);
+    }
+
+    // Used for log messages for a unique display of the memory/object allocated to this instance
+    public virtual string AddrString
+    {
+        get { return "unknown"; }
+    }
+
+    public override string ToString()
+    {
+        StringBuilder buff = new StringBuilder();
+        buff.Append("<id=");
+        buff.Append(ID.ToString());
+        buff.Append(",p=");
+        buff.Append(AddrString);
+        buff.Append(",c=");
+        buff.Append(collisionType);
+        buff.Append(">");
+        return buff.ToString();
+    }
+}
+
+public class BulletShape
+{
+    public BulletShape()
+    {
+        shapeType = BSPhysicsShapeType.SHAPE_UNKNOWN;
+        shapeKey = (System.UInt64)FixedShapeKey.KEY_NONE;
+        isNativeShape = false;
+    }
+    public BSPhysicsShapeType shapeType;
+    public System.UInt64 shapeKey;
+    public bool isNativeShape;
+
+    public virtual void Clear() { }
+    public virtual bool HasPhysicalShape { get { return false; } }
+
+    // Make another reference to this physical object.
+    public virtual BulletShape Clone() { return new BulletShape(); }
+
+    // Return 'true' if this and other refer to the same physical object
+    public virtual bool ReferenceSame(BulletShape xx) { return false; }
+
+    // Used for log messages for a unique display of the memory/object allocated to this instance
+    public virtual string AddrString
+    {
+        get { return "unknown"; }
+    }
+
+    public override string ToString()
+    {
+        StringBuilder buff = new StringBuilder();
+        buff.Append("<p=");
+        buff.Append(AddrString);
+        buff.Append(",s=");
+        buff.Append(shapeType.ToString());
+        buff.Append(",k=");
+        buff.Append(shapeKey.ToString("X"));
+        buff.Append(",n=");
+        buff.Append(isNativeShape.ToString());
+        buff.Append(">");
+        return buff.ToString();
+    }
+}
+
+// An allocated Bullet btConstraint
+public class BulletConstraint
+{
+    public BulletConstraint()
+    {
+    }
+    public virtual void Clear() { }
+    public virtual bool HasPhysicalConstraint { get { return false; } }
+
+    // Used for log messages for a unique display of the memory/object allocated to this instance
+    public virtual string AddrString
+    {
+        get { return "unknown"; }
+    }
+}
+
+// An allocated HeightMapThing which holds various heightmap info.
+// Made a class rather than a struct so there would be only one
+//      instance of this and C# will pass around pointers rather
+//      than making copies.
+public class BulletHMapInfo
+{
+    public BulletHMapInfo(uint id, float[] hm, float pSizeX, float pSizeY) {
+        ID = id;
+        heightMap = hm;
+        terrainRegionBase = OMV.Vector3.Zero;
+        minCoords = new OMV.Vector3(100f, 100f, 25f);
+        maxCoords = new OMV.Vector3(101f, 101f, 26f);
+        minZ = maxZ = 0f;
+        sizeX = pSizeX;
+        sizeY = pSizeY;
+    }
+    public uint ID;
+    public float[] heightMap;
+    public OMV.Vector3 terrainRegionBase;
+    public OMV.Vector3 minCoords;
+    public OMV.Vector3 maxCoords;
+    public float sizeX, sizeY;
+    public float minZ, maxZ;
+    public BulletShape terrainShape;
+    public BulletBody terrainBody;
+}
+
+// The general class of collsion object.
+public enum CollisionType
+{
+    Avatar,
+    PhantomToOthersAvatar, // An avatar that it phantom to other avatars but not to anything else
+    Groundplane,
+    Terrain,
+    Static,
+    Dynamic,
+    VolumeDetect,
+    // Linkset, // A linkset should be either Static or Dynamic
+    LinksetChild,
+    Unknown
+};
+
+// Hold specification of group and mask collision flags for a CollisionType
+public struct CollisionTypeFilterGroup
+{
+    public CollisionTypeFilterGroup(CollisionType t, uint g, uint m)
+    {
+        type = t;
+        group = g;
+        mask = m;
+    }
+    public CollisionType type;
+    public uint group;
+    public uint mask;
+};
+
+public static class BulletSimData
+{
+
+// Map of collisionTypes to flags for collision groups and masks.
+// An object's 'group' is the collison groups this object belongs to
+// An object's 'filter' is the groups another object has to belong to in order to collide with me
+// A collision happens if ((obj1.group & obj2.filter) != 0) || ((obj2.group & obj1.filter) != 0)
+//
+// As mentioned above, don't use the CollisionFilterGroups definitions directly in the code
+//     but, instead, use references to this dictionary. Finding and debugging
+//     collision flag problems will be made easier.
+public static Dictionary<CollisionType, CollisionTypeFilterGroup> CollisionTypeMasks
+            = new Dictionary<CollisionType, CollisionTypeFilterGroup>()
+{
+    { CollisionType.Avatar,
+                new CollisionTypeFilterGroup(CollisionType.Avatar,
+                                (uint)CollisionFilterGroups.BCharacterGroup,
+                                (uint)(CollisionFilterGroups.BAllGroup))
+    },
+    { CollisionType.PhantomToOthersAvatar,
+        new CollisionTypeFilterGroup(CollisionType.PhantomToOthersAvatar,
+                                     (uint)CollisionFilterGroups.BCharacterGroup,
+                                     (uint)(CollisionFilterGroups.BAllGroup & ~CollisionFilterGroups.BCharacterGroup))
+    },
+    { CollisionType.Groundplane,
+                new CollisionTypeFilterGroup(CollisionType.Groundplane,
+                                (uint)CollisionFilterGroups.BGroundPlaneGroup,
+                                // (uint)CollisionFilterGroups.BAllGroup)
+                                (uint)(CollisionFilterGroups.BCharacterGroup | CollisionFilterGroups.BSolidGroup))
+    },
+    { CollisionType.Terrain,
+                new CollisionTypeFilterGroup(CollisionType.Terrain,
+                                (uint)CollisionFilterGroups.BTerrainGroup,
+                                (uint)(CollisionFilterGroups.BAllGroup & ~CollisionFilterGroups.BStaticGroup))
+    },
+    { CollisionType.Static,
+                new CollisionTypeFilterGroup(CollisionType.Static,
+                                (uint)CollisionFilterGroups.BStaticGroup,
+                                (uint)(CollisionFilterGroups.BCharacterGroup | CollisionFilterGroups.BSolidGroup))
+    },
+    { CollisionType.Dynamic,
+                new CollisionTypeFilterGroup(CollisionType.Dynamic,
+                                (uint)CollisionFilterGroups.BSolidGroup,
+                                (uint)(CollisionFilterGroups.BAllGroup))
+    },
+    { CollisionType.VolumeDetect,
+                new CollisionTypeFilterGroup(CollisionType.VolumeDetect,
+                                (uint)CollisionFilterGroups.BSensorTrigger,
+                                (uint)(~CollisionFilterGroups.BSensorTrigger))
+    },
+    { CollisionType.LinksetChild,
+                new CollisionTypeFilterGroup(CollisionType.LinksetChild,
+                                (uint)CollisionFilterGroups.BLinksetChildGroup,
+                                (uint)(CollisionFilterGroups.BNoneGroup))
+                                // (uint)(CollisionFilterGroups.BCharacterGroup | CollisionFilterGroups.BSolidGroup))
+    },
+};
+
+}
+}
diff --git a/OpenSim/Region/PhysicsModules/BulletS/BulletSimTODO.txt b/OpenSim/Region/PhysicsModules/BulletS/BulletSimTODO.txt
new file mode 100755
index 0000000..0453376
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/BulletSimTODO.txt
@@ -0,0 +1,379 @@
+CURRENT PROBLEMS TO FIX AND/OR LOOK AT
+=================================================
+Vehicle buoyancy. Computed correctly? Possibly creating very large effective mass.
+    Interaction of llSetBuoyancy and vehicle buoyancy. Should be additive?
+    Negative buoyancy computed correctly
+Center-of-gravity
+Computation of mesh mass. How done? How should it be done?
+Enable vehicle border crossings (at least as poorly as ODE)
+        Terrain skirts
+        Avatar created in previous region and not new region when crossing border
+        Vehicle recreated in new sim at small Z value (offset from root value?) (DONE)
+User settable terrain mesh
+        Allow specifying as convex or concave and use different getHeight functions depending
+Boats, when turning nose down into the water
+        Acts like rotation around Z is also effecting rotation around X and Y
+Deleting a linkset while standing on the root will leave the physical shape of the root behind.
+        Not sure if it is because standing on it. Done with large prim linksets.
+Linkset child rotations.
+        Nebadon spiral tube has middle sections which are rotated wrong.
+        Select linked spiral tube. Delink and note where the middle section ends up.
+Teravus llMoveToTarget script debug
+        Mixing of hover, buoyancy/gravity, moveToTarget, into one force
+        Setting hover height to zero disables hover even if hover flags are on (from SL wiki)
+limitMotorUp calibration (more down?)
+llRotLookAt
+llLookAt
+Convert to avatar mesh capsule. Include rotation of capsule.
+Vehicle script tuning/debugging
+        Avanti speed script
+        Weapon shooter script
+Move material definitions (friction, ...) into simulator.
+osGetPhysicsEngineVerion() and create a version code for the C++ DLL
+One sided meshes? Should terrain be built into a closed shape?
+        When meshes get partially wedged into the terrain, they cannot push themselves out.
+        It is possible that Bullet processes collisions whether entering or leaving a mesh.
+        Ref: http://bulletphysics.org/Bullet/phpBB3/viewtopic.php?t=4869
+Small physical objects do not interact correctly
+    Create chain of .5x.5x.1 torui and make all but top physical so to hang.
+        The chain will fall apart and pairs will dance around on ground
+    Chains of 1x1x.2 will stay connected but will dance.
+    Chains above 2x2x.4 are more stable and get stablier as torui get larger.
+
+VEHICLES TODO LIST:
+=================================================
+LINEAR_MOTOR_DIRECTION values should be clamped to reasonable numbers.
+        What are the limits in SL?
+        Same for other velocity settings.
+UBit improvements to remove rubber-banding of avatars sitting on vehicle child prims:
+        https://github.com/UbitUmarov/Ubit-opensim
+Some vehicles should not be able to turn if no speed or off ground.
+Cannot edit/move a vehicle being ridden: it jumps back to the origional position.
+Neb car jiggling left and right
+        Happens on terrain and any other mesh object. Flat cubes are much smoother.
+        This has been reduced but not eliminated.
+Implement referenceFrame for all the motion routines.
+Verify llGetVel() is returning a smooth and good value for vehicle movement.
+llGetVel() should return the root's velocity if requested in a child prim.
+Implement function efficiency for lineaar and angular motion.
+Linkset explosion after three "rides" on Nebadon lite vehicle (LinksetConstraint)
+Remove vehicle angular velocity zeroing in BSPrim.UpdateProperties().
+        A kludge that isn't fixing the real problem of Bullet adding extra motion.
+Incorporate inter-relationship of angular corrections. For instance, angularDeflection
+        and angularMotorUp will compute same X or Y correction. When added together
+        creates over-correction and over-shoot and wabbling.
+Vehicle attributes are not restored when a vehicle is rezzed on region creation
+        Create vehicle, setup vehicle properties, restart region, vehicle is not reinitialized.
+What to do if vehicle and prim buoyancy differ?
+
+GENERAL TODO LIST:
+=================================================
+Resitution of a prim works on another prim but not on terrain.
+        The dropped prim doesn't bounce properly on the terrain.
+Add a sanity check for PIDTarget location.
+Level-of-detail for mesh creation. Prims with circular interiors require lod of 32.
+        Is much saved with lower LODs? At the moment, all set to 32.
+Collisions are inconsistant: arrows are supposed to hit and report collision. Often don't.
+        If arrow show at prim, collision reported about 1/3 of time. If collision reported,
+        both arrow and prim report it. The arrow bounces off the prim 9 out of 10 times.
+        Shooting 5m sphere "arrows" at 60m/s.
+llMoveToTarget objects are not effected by gravity until target is removed.
+Compute CCD parameters based on body size
+Can solver iterations be changed per body/shape? Can be for constraints but what
+        about regular vehicles?
+Implement llSetPhysicalMaterial.
+        extend it with Center-of-mass, rolling friction, density
+Implement llSetForceAndTorque.
+Change BSPrim.moveToTarget to used forces rather than changing position
+        Changing position allows one to move through walls
+Implement an avatar mesh shape. The Bullet capsule is way too limited.
+        Consider just hand creating a vertex/index array in a new BSShapeAvatar.
+Verify/fix phantom, volume-detect objects do not fall to infinity. Should stop at terrain.
+Revisit CollisionMargin. Builders notice the 0.04 spacing between prims.
+Duplicating a physical prim causes old prim to jump away
+        Dup a phys prim and the original become unselected and thus interacts w/ selected prim.
+Scenes with hundred of thousands of static objects take a lot of physics CPU time.
+Gun sending shooter flying.
+Collision margin (gap between physical objects lying on each other)
+Boundry checking (crashes related to crossing boundry)
+    Add check for border edge position for avatars and objects.
+    Verify the events are created for border crossings.
+Implement ShapeCollection.Dispose()
+Implement water as a plain or mesh so raycasting and collisions can happen with same.
+Add collision penetration return
+        Add field passed back by BulletSim.dll and fill with info in ManifoldConstact.GetDistance()
+Linkset.Position and Linkset.Orientation requre rewrite to properly return
+        child position. LinksetConstraint acts like it's at taint time!!
+Implement LockAngularMotion -- implements llSetStatus(ROTATE_AXIS_*, T/F)
+Should the different PID factors have non-equal contributions for different
+        values of Efficiency?
+Selecting and deselecting physical objects causes CPU processing time to jump
+        http://www.youtube.com/watch?v=Hjg57fWg8yI&hd=1
+        put thousand physical objects, select and deselect same. CPU time will be large.
+Re-implement buoyancy as a separate force on the object rather than diddling gravity.
+        Register a pre-step event to add the force.
+More efficient memory usage when passing hull information from BSPrim to BulletSim
+Physical and phantom will drop through the terrain
+
+
+LINKSETS
+======================================================
+Child prims do not report collisions
+Allow children of a linkset to be phantom:
+        http://opensim-dev.2196679.n2.nabble.com/Setting-a-single-child-prim-to-Phantom-tp7578513.html
+        Add OS_STATUS_PHANTOM_PRIM to llSetLinkPrimitaveParamsFast.
+Editing a child of a linkset causes the child to go phantom
+        Move a child prim once when it is physical and can never move it again without it going phantom
+Offset the center of the linkset to be the geometric center of all the prims
+        Not quite the same as the center-of-gravity
+Linksets should allow collisions to individual children
+        Add LocalID to children shapes in LinksetCompound and create events for individuals
+LinksetCompound: when one of the children changes orientation (like tires
+        turning on a vehicle, the whole compound object is rebuilt. Optimize this
+        so orientation/position of individual children can change without a rebuild.
+Verify/think through scripts in children of linksets. What do they reference
+        and return when getting position, velocity, ...
+Confirm constraint linksets still work after making all the changes for compound linksets.
+Use PostTaint callback to do rebuilds for constraint linksets to reduce rebuilding
+Add 'changed' flag or similar to reduce the number of times a linkset is rebuilt.
+        For compound linksets, add ability to remove or reposition individual child shapes.
+Speed up creation of large physical linksets
+        For instance, sitting in Neb's car (130 prims) takes several seconds to become physical.
+        REALLY bad for very large physical linksets (freezes the sim for many seconds).
+Eliminate collisions between objects in a linkset. (LinksetConstraint)
+    Have UserPointer point to struct with localID and linksetID?
+    Objects in original linkset still collide with each other?
+
+MORE
+======================================================
+Compute avatar size and scale correctly. Now it is a bit off from the capsule size.
+Create tests for different interface components
+        Have test objects/scripts measure themselves and turn color if correct/bad
+        Test functions in SL and calibrate correctness there
+        Create auto rezzer and tracker to run through the tests
+Do we need to do convex hulls all the time? Can complex meshes be left meshes?
+        There is some problem with meshes and collisions
+        Hulls are not as detailed as meshes. Hulled vehicles insides are different shape.
+Debounce avatar contact so legs don't keep folding up when standing.
+Add border extensions to terrain to help region crossings and objects leaving region.
+Use a different capsule shape for avatar when sitting
+        LL uses a pyrimidal shape scaled by the avatar's bounding box
+        http://wiki.secondlife.com/wiki/File:Avmeshforms.png
+Performance test with lots of avatars. Can BulletSim support a thousand?
+Optimize collisions in C++: only send up to the object subscribed to collisions.
+    Use collision subscription and remove the collsion(A,B) and collision(B,A)
+Check whether SimMotionState needs large if statement (see TODO).
+Implement 'top colliders' info.
+Avatar jump
+Performance measurement and changes to make quicker.
+Implement detailed physics stats (GetStats()).
+Measure performance improvement from hulls
+Test not using ghost objects for volume detect implementation.
+Performance of closures and delegates for taint processing
+        Are there faster ways?
+        Is any slowdown introduced by the existing implementation significant?
+Is there are more efficient method of implementing pre and post step actions?
+        See http://www.codeproject.com/Articles/29922/Weak-Events-in-C
+Physics Arena central pyramid: why is one side permiable?
+In SL, perfect spheres don't seem to have rolling friction. Add special case.
+Enforce physical parameter min/max:
+        Gravity: [-1, 28]
+        Friction: [0, 255]
+        Density: [1, 22587]
+        Restitution [0, 1]
+        http://wiki.secondlife.com/wiki/Physics_Material_Settings_test
+Avatar attachments have no mass? http://forums-archive.secondlife.com/54/f0/31796/1.html
+Keep avatar scaling correct. http://pennycow.blogspot.fr/2011/07/matter-of-scale.html
+
+INTERNAL IMPROVEMENT/CLEANUP
+=================================================
+Create the physical wrapper classes (BulletBody, BulletShape) by methods on
+        BSAPITemplate and make their actual implementation Bullet engine specific.
+        For the short term, just call the existing functions in ShapeCollection.
+Consider moving prim/character body and shape destruction in destroy()
+        to postTimeTime rather than protecting all the potential sets that
+        might have been queued up.
+Remove unused fields from ShapeData (not used in API2)
+Remove unused fields from pinned memory shared parameter block
+        Create parameter variables in BSScene to replace same.
+Breakout code for mesh/hull/compound/native into separate BSShape* classes
+    Standardize access to building and reference code.
+        The skeleton classes are in the sources but are not complete or linked in.
+Make BSBody and BSShape real classes to centralize creation/changin/destruction
+        Convert state and parameter calls from BulletSimAPI direct calls to
+                calls on BSBody and BSShape
+Generalize Dynamics and PID with standardized motors.
+Generalize Linkset and vehicles into PropertyManagers
+    Methods for Refresh, RemoveBodyDependencies, RestoreBodyDependencies
+        Potentially add events for shape destruction, etc.
+Better mechanism for resetting linkset set and vehicle parameters when body rebuilt.
+        BSPrim.CreateGeomAndObject is kludgy with the callbacks, etc.
+Implement linkset by setting position of children when root updated. (LinksetManual)
+        Linkset implementation using manual prim movement.
+LinkablePrim class? Would that simplify/centralize the linkset logic?
+BSScene.UpdateParameterSet() is broken. How to set params on objects?
+Add floating motor for BS_FLOATS_ON_WATER so prim and avatar will
+    bob at the water level. BSPrim.PositionSanityCheck()
+Should taints check for existance or activeness of target?
+        When destroying linksets/etc, taints can be generated for objects that are
+        actually gone when the taint happens. Crashes don't happen because the taint closure
+        keeps the object from being freed, but that is just an accident.
+        Possibly have an 'active' flag that is checked by the taint processor?
+Parameters for physics logging should be moved from BSScene to BSParam (at least boolean ones)
+Can some of the physical wrapper classes (BulletBody, BulletWorld, BulletShape) be 'sealed'?
+There are TOO MANY interfaces from BulletSim core to Bullet itself
+        Think of something to eliminate one or more of the layers
+
+THREADING
+=================================================
+Do taint action immediately if not actually executing Bullet.
+        Add lock around Bullet execution and just do taint actions if simulation is not happening.
+
+DONE DONE DONE DONE
+=================================================
+Cleanup code in BSDynamics by using motors. (Resolution: started)
+Consider implementing terrain with a mesh rather than heightmap. (Resolution: done)
+    Would have better and adjustable resolution.
+Build terrain mesh so heighmap is height of the center of the square meter.
+    Resolution: NOT DONE: SL and ODE define meter square as being at one corner with one diagional.
+Terrain as mesh. (Resolution: done)
+How are static linksets seen by the physics engine?
+    Resolution: they are not linked in physics. When moved, all the children are repositioned.
+Convert BSCharacter to use all API2 (Resolution: done)
+Avatar pushing difficult (too heavy?)
+Use asset service passed to BulletSim to get sculptie bodies, etc. (Resolution: done)
+Remove old code in DLL (all non-API2 stuff). (Resolution: done)
+Measurements of mega-physical prim performance (with graph) (Resolution: done, email)
+Debug Bullet internal stats output (why is timing all wrong?)
+        Resolution: Bullet stats logging only works with a single instance of Bullet (one region).
+Implement meshes or just verify that they work. (Resolution: they do!)
+Do prim hash codes work for sculpties and meshes? (Resolution: yes)
+Linkset implementation using compound shapes. (Resolution: implemented LinksetCompound)
+    Compound shapes will need the LocalID in the shapes and collision
+    processing to get it from there.
+Light cycle not banking (Resolution: It doesn't. Banking is roll adding yaw.)
+Package Bullet source mods for Bullet internal stats output
+        (Resolution: move code into WorldData.h rather than relying on patches)
+Single prim vehicles don't seem to properly vehiclize.
+        (Resolution: mass was not getting set properly for single prim linksets)
+Add material type linkage and input all the material property definitions.
+        Skeleton classes and table are in the sources but are not filled or used.
+        (Resolution: 
+Neb vehicle taking > 25ms of physics time!!
+        (Resolution: compound linksets were being rebuild WAY too often)
+Avatar height off after unsitting (floats off ground)
+        Editting appearance then moving restores.
+        Must not be initializing height when recreating capsule after unsit.
+        (Resolution: confusion of scale vs size for native objects removed)
+Light cycle falling over when driving (Resolution: implemented angularMotorUp)
+Should vehicle angular/linear movement friction happen after all the components
+        or does it only apply to the basic movement?
+        (Resolution: friction added before returning newly computed motor value.
+        What is expected by some vehicles (turning up friction to moderate speed))
+Tune terrain/object friction to be closer to SL.
+        (Resolution: added material type with friction and resolution)
+Smooth avatar movement with motor (DONE)
+        Should motor update be all at taint-time? (Yes, DONE)
+        Fix avatar slowly sliding when standing (zero motion when stopped) (DONE)
+        (Resolution: added BSVMotor for avatar starting and stopping)
+llApplyImpulse()
+        Compare mass/movement in OS and SL. Calibrate actions.  (DONE)
+        (Resolution: tested on SL and OS. AddForce scales the force for timestep)
+llSetBuoyancy() (DONE)
+        (Resolution: Bullet resets object gravity when added to world. Moved set gravity)
+Avatar density is WAY off. Compare and calibrate with what's in SL. (DONE)
+        (Resolution: set default density to 3.5 (from 60) which is closer to SL)
+Redo BulletSimAPI to allow native C# implementation of Bullet option (DONE)
+        (Resolution: added BSAPITemplate and then interfaces for C++ Bullet and C# BulletXNA
+Meshes rendering as bounding boxes (DONE)
+        (Resolution: Added test for mesh/sculpties in native shapes so it didn't think it was a box)
+llMoveToTarget (Resolution: added simple motor to update the position.)
+Angular motor direction is global coordinates rather than local coordinates (DONE)
+Add vehicle collisions so IsColliding is properly reported. (DONE)
+        Needed for banking, limitMotorUp, movementLimiting, ...
+        (Resolution: added CollisionFlags.BS_VEHICLE_COLLISION and code to use it)
+VehicleAddForce is not scaled by the simulation step but it is only
+        applied for one step. Should it be scaled? (DONE)
+        (Resolution: use force for timed things, Impulse for immediate, non-timed things)
+Complete implemention of preStepActions (DONE)
+        Replace vehicle step call with prestep event.
+        Is there a need for postStepActions? postStepTaints?
+Disable activity of passive linkset children. (DONE)
+        Since the linkset is a compound object, the old prims are left lying
+        around and need to be phantomized so they don't collide, ...
+Remove HeightmapInfo from terrain specification (DONE)
+    Since C++ code does not need terrain height, this structure et al are not needed.
+Surfboard go wonky when turning (DONE)
+        Angular motor direction is global coordinates rather than local coordinates?
+        (Resolution: made angular motor direction correct coordinate system)
+Mantis 6040 script http://opensimulator.org/mantis/view.php?id=6040 (DONE)
+        Msg Kayaker on OSGrid when working
+        (Resolution: LINEAR_DIRECTION is in vehicle coords. Test script does the
+        same in SL as in OS/BulletSim)
+Boats float low in the water (DONE)
+Boats floating at proper level (DONE)
+When is force introduced by SetForce removed? The prestep action could go forever. (DONE)
+        (Resolution: setForce registers a prestep action which keeps applying the force)
+Child movement in linkset (don't rebuild linkset) (DONE 20130122))
+Avatar standing on a moving object should start to move with the object. (DONE 20130125)
+Angular motion around Z moves the vehicle in world Z and not vehicle Z in ODE.
+        Verify that angular motion specified around Z moves in the vehicle coordinates.
+        DONE 20130120: BulletSim properly applies force in vehicle relative coordinates.
+Nebadon vehicles turning funny in arena (DONE)
+Lock axis (DONE 20130401)
+Terrain detail: double terrain mesh detail (DONE)
+Use the HACD convex hull routine in Bullet rather than the C# version.  
+        Speed up hullifying large meshes. (DONE)
+Vehicle ride, get up, ride again. Second time vehicle does not act correctly.
+        Have to rez new vehicle and delete the old to fix situation.
+        (DONE 20130520: normalize rotations)
+Hitting RESET on Nebadon's vehicle while riding causes vehicle to get into odd
+        position state where it will not settle onto ground properly, etc
+        (DONE 20130520: normalize rotations)
+Two of Nebadon vehicles in a sim max the CPU. This is new.
+        (DONE 20130520: two problems: if asset failed to mesh, constantly refetched
+        asset; vehicle was sending too many messages to all linkset members)
+Add material densities to the material types. (WILL NOT BE DONE: not how it is done)
+Avatars walking up stairs (DONE)
+Avatar movement
+        flying into a wall doesn't stop avatar who keeps appearing to move through the obstacle (DONE)
+        walking up stairs is not calibrated correctly (stairs out of Kepler cabin) (DONE)
+        avatar capsule rotation completed (NOT DONE - Bullet's capsule shape is not the solution)
+After getting off a vehicle, the root prim is phantom (can be walked through)
+    Need to force a position update for the root prim after compound shape destruction
+        (DONE)
+Explore btGImpactMeshShape as alternative to convex hulls for simplified physical objects.
+        Regular triangle meshes don't do physical collisions.
+        (DONE: discovered GImpact is VERY CPU intensive)
+Script changing rotation of child prim while vehicle moving (eg turning wheel) causes
+        the wheel to appear to jump back. Looks like sending position from previous update.
+        (DONE: redo of compound linksets fixed problem)
+Refarb compound linkset creation to create a pseudo-root for center-of-mass
+        Let children change their shape to physical indendently and just add shapes to compound
+        (DONE: redo of compound linkset fixed problem)
+Vehicle angular vertical attraction     (DONE: vegaslon code)
+vehicle angular banking (DONE: vegaslon code)
+Vehicle angular deflection      (DONE: vegaslon code)
+        Preferred orientation angular correction fix
+Vehicles (Move smoothly)
+For limitMotorUp, use raycast down to find if vehicle is in the air.
+        (WILL NOT BE DONE: gravity does the job well enough)
+BSPrim.Force should set a continious force on the prim. The force should be
+        applied each tick.  Some limits?
+        (DONE: added physical actors. Implemented SetForce, SetTorque, ...)
+Implement LSL physics controls. Like STATUS_ROTATE_X. (DONE)
+Add osGetPhysicsEngineName() so scripters can tell whether BulletSim or ODE
+Avatar rotation (check out changes to ScenePresence for physical rotation) (DONE)
+Avatar running (what does phys engine need to do?) (DONE: multiplies run factor by walking force)
+setForce should set a constant force. Different than AddImpulse. (DONE)
+Add PID motor for avatar movement (slow to stop, ...) (WNBD: current works ok)
+Avatar movement motor check for zero or small movement. Somehow suppress small movements
+        when avatar has stopped and is just standing. Simple test for near zero has
+        the problem of preventing starting up (increase from zero) especially when falling.
+        (DONE: avatar movement actor knows if standing on stationary object and zeros motion)
+Can the 'inTaintTime' flag be cleaned up and used? For instance, a call to
+        BSScene.TaintedObject() could immediately execute the callback if already in taint time.
+        (DONE)
+
+
+
diff --git a/OpenSim/Region/PhysicsModules/BulletS/ExtendedPhysics.cs b/OpenSim/Region/PhysicsModules/BulletS/ExtendedPhysics.cs
new file mode 100755
index 0000000..2ba3c5a
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/ExtendedPhysics.cs
@@ -0,0 +1,622 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyrightD
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Reflection;
+using System.Text;
+using System.Threading;
+
+using OpenSim.Framework;
+using OpenSim.Region.Framework;
+using OpenSim.Region.Framework.Interfaces;
+using OpenSim.Region.Framework.Scenes;
+using OpenSim.Region.PhysicsModules.SharedBase;
+
+using Mono.Addins;
+using Nini.Config;
+using log4net;
+using OpenMetaverse;
+
+namespace OpenSim.Region.PhysicsModule.BulletS
+{
+    [Extension(Path = "/OpenSim/RegionModules", NodeName = "RegionModule")]
+    public class ExtendedPhysics : INonSharedRegionModule
+    {
+        private static readonly ILog m_log = LogManager.GetLogger(MethodBase.GetCurrentMethod().DeclaringType);
+        private static string LogHeader = "[EXTENDED PHYSICS]";
+
+        // =============================================================
+        // Since BulletSim is a plugin, this these values aren't defined easily in one place.
+        // This table must correspond to an identical table in BSScene.
+
+        // Per scene functions. See BSScene.
+
+        // Per avatar functions. See BSCharacter.
+
+        // Per prim functions. See BSPrim.
+        public const string PhysFunctGetLinksetType = "BulletSim.GetLinksetType";
+        public const string PhysFunctSetLinksetType = "BulletSim.SetLinksetType";
+        public const string PhysFunctChangeLinkFixed = "BulletSim.ChangeLinkFixed";
+        public const string PhysFunctChangeLinkType = "BulletSim.ChangeLinkType";
+        public const string PhysFunctGetLinkType = "BulletSim.GetLinkType";
+        public const string PhysFunctChangeLinkParams = "BulletSim.ChangeLinkParams";
+        public const string PhysFunctAxisLockLimits = "BulletSim.AxisLockLimits";
+
+        // =============================================================
+
+        private IConfig Configuration { get; set; }
+        private bool Enabled { get; set; }
+        private Scene BaseScene { get; set; }
+        private IScriptModuleComms Comms { get; set; }
+
+        #region INonSharedRegionModule
+
+        public string Name { get { return this.GetType().Name; } }
+
+        public void Initialise(IConfigSource config)
+        {
+            BaseScene = null;
+            Enabled = false;
+            Configuration = null;
+            Comms = null;
+
+            try
+            {
+                if ((Configuration = config.Configs["ExtendedPhysics"]) != null)
+                {
+                    Enabled = Configuration.GetBoolean("Enabled", Enabled);
+                }
+            }
+            catch (Exception e)
+            {
+                m_log.ErrorFormat("{0} Initialization error: {0}", LogHeader, e);
+            }
+
+            m_log.InfoFormat("{0} module {1} enabled", LogHeader, (Enabled ? "is" : "is not"));
+        }
+
+        public void Close()
+        {
+            if (BaseScene != null)
+            {
+                BaseScene.EventManager.OnObjectAddedToScene -= EventManager_OnObjectAddedToScene;
+                BaseScene.EventManager.OnSceneObjectPartUpdated -= EventManager_OnSceneObjectPartUpdated;
+                BaseScene = null;
+            }
+        }
+
+        public void AddRegion(Scene scene)
+        {
+        }
+
+        public void RemoveRegion(Scene scene)
+        {
+            if (BaseScene != null && BaseScene == scene)
+            {
+                Close();
+            }
+        }
+
+        public void RegionLoaded(Scene scene)
+        {
+            if (!Enabled) return;
+
+            BaseScene = scene;
+
+            Comms = BaseScene.RequestModuleInterface<IScriptModuleComms>();
+            if (Comms == null)
+            {
+                m_log.WarnFormat("{0} ScriptModuleComms interface not defined", LogHeader);
+                Enabled = false;
+
+                return;
+            }
+ 
+            // Register as LSL functions all the [ScriptInvocation] marked methods.
+            Comms.RegisterScriptInvocations(this);
+            Comms.RegisterConstants(this);
+
+            // When an object is modified, we might need to update its extended physics parameters
+            BaseScene.EventManager.OnObjectAddedToScene += EventManager_OnObjectAddedToScene;
+            BaseScene.EventManager.OnSceneObjectPartUpdated += EventManager_OnSceneObjectPartUpdated;
+
+        }
+
+        public Type ReplaceableInterface { get { return null; } }
+
+        #endregion // INonSharedRegionModule
+
+        private void EventManager_OnObjectAddedToScene(SceneObjectGroup obj)
+        {
+        }
+
+        // Event generated when some property of a prim changes.
+        private void EventManager_OnSceneObjectPartUpdated(SceneObjectPart sop, bool isFullUpdate)
+        {
+        }
+
+        [ScriptConstant]
+        public const int PHYS_CENTER_OF_MASS =     1 << 0;
+
+        [ScriptInvocation]
+        public string physGetEngineType(UUID hostID, UUID scriptID)
+        {
+            string ret = string.Empty;
+
+            if (BaseScene.PhysicsScene != null)
+            {
+                ret = BaseScene.PhysicsScene.EngineType;
+            }
+
+            return ret;
+        }
+
+        // Code for specifying params.
+        // The choice if 14700 is arbitrary and only serves to catch parameter code misuse.
+        [ScriptConstant]
+        public const int PHYS_AXIS_LOCK_LINEAR     = 14700;
+        [ScriptConstant]
+        public const int PHYS_AXIS_LOCK_LINEAR_X   = 14701;
+        [ScriptConstant]
+        public const int PHYS_AXIS_LIMIT_LINEAR_X  = 14702;
+        [ScriptConstant]
+        public const int PHYS_AXIS_LOCK_LINEAR_Y   = 14703;
+        [ScriptConstant]
+        public const int PHYS_AXIS_LIMIT_LINEAR_Y  = 14704;
+        [ScriptConstant]
+        public const int PHYS_AXIS_LOCK_LINEAR_Z   = 14705;
+        [ScriptConstant]
+        public const int PHYS_AXIS_LIMIT_LINEAR_Z  = 14706;
+        [ScriptConstant]
+        public const int PHYS_AXIS_LOCK_ANGULAR    = 14707;
+        [ScriptConstant]
+        public const int PHYS_AXIS_LOCK_ANGULAR_X  = 14708;
+        [ScriptConstant]
+        public const int PHYS_AXIS_LIMIT_ANGULAR_X = 14709;
+        [ScriptConstant]
+        public const int PHYS_AXIS_LOCK_ANGULAR_Y  = 14710;
+        [ScriptConstant]
+        public const int PHYS_AXIS_LIMIT_ANGULAR_Y = 14711;
+        [ScriptConstant]
+        public const int PHYS_AXIS_LOCK_ANGULAR_Z  = 14712;
+        [ScriptConstant]
+        public const int PHYS_AXIS_LIMIT_ANGULAR_Z = 14713;
+        [ScriptConstant]
+        public const int PHYS_AXIS_UNLOCK_LINEAR   = 14714;
+        [ScriptConstant]
+        public const int PHYS_AXIS_UNLOCK_LINEAR_X = 14715;
+        [ScriptConstant]
+        public const int PHYS_AXIS_UNLOCK_LINEAR_Y = 14716;
+        [ScriptConstant]
+        public const int PHYS_AXIS_UNLOCK_LINEAR_Z = 14717;
+        [ScriptConstant]
+        public const int PHYS_AXIS_UNLOCK_ANGULAR  = 14718;
+        [ScriptConstant]
+        public const int PHYS_AXIS_UNLOCK_ANGULAR_X = 14719;
+        [ScriptConstant]
+        public const int PHYS_AXIS_UNLOCK_ANGULAR_Y = 14720;
+        [ScriptConstant]
+        public const int PHYS_AXIS_UNLOCK_ANGULAR_Z = 14721;
+        [ScriptConstant]
+        public const int PHYS_AXIS_UNLOCK           = 14722;
+        // physAxisLockLimits()
+        [ScriptInvocation]
+        public int physAxisLock(UUID hostID, UUID scriptID, object[] parms)
+        {
+            int ret = -1;
+            if (!Enabled) return ret;
+
+            PhysicsActor rootPhysActor;
+            if (GetRootPhysActor(hostID, out rootPhysActor))
+            {
+                object[] parms2 = AddToBeginningOfArray(rootPhysActor, null, parms);
+                ret = MakeIntError(rootPhysActor.Extension(PhysFunctAxisLockLimits, parms2));
+            }
+
+            return ret;
+        }
+
+        [ScriptConstant]
+        public const int PHYS_LINKSET_TYPE_CONSTRAINT  = 0;
+        [ScriptConstant]
+        public const int PHYS_LINKSET_TYPE_COMPOUND    = 1;
+        [ScriptConstant]
+        public const int PHYS_LINKSET_TYPE_MANUAL      = 2;
+
+        [ScriptInvocation]
+        public int physSetLinksetType(UUID hostID, UUID scriptID, int linksetType)
+        {
+            int ret = -1;
+            if (!Enabled) return ret;
+
+            // The part that is requesting the change.
+            SceneObjectPart requestingPart = BaseScene.GetSceneObjectPart(hostID);
+
+            if (requestingPart != null)
+            {
+                // The change is always made to the root of a linkset.
+                SceneObjectGroup containingGroup = requestingPart.ParentGroup;
+                SceneObjectPart rootPart = containingGroup.RootPart;
+
+                if (rootPart != null)
+                {
+                    PhysicsActor rootPhysActor = rootPart.PhysActor;
+                    if (rootPhysActor != null)
+                    {
+                        if (rootPhysActor.IsPhysical)
+                        {
+                            // Change a physical linkset by making non-physical, waiting for one heartbeat so all
+                            //    the prim and linkset state is updated, changing the type and making the
+                            //    linkset physical again.
+                            containingGroup.ScriptSetPhysicsStatus(false);
+                            Thread.Sleep(150);  // longer than one heartbeat tick
+
+                            // A kludge for the moment.
+                            // Since compound linksets move the children but don't generate position updates to the
+                            //     simulator, it is possible for compound linkset children to have out-of-sync simulator
+                            //     and physical positions. The following causes the simulator to push the real child positions
+                            //     down into the physics engine to get everything synced.
+                            containingGroup.UpdateGroupPosition(containingGroup.AbsolutePosition);
+                            containingGroup.UpdateGroupRotationR(containingGroup.GroupRotation);
+
+                            object[] parms2 = { rootPhysActor, null, linksetType };
+                            ret = MakeIntError(rootPhysActor.Extension(PhysFunctSetLinksetType, parms2));
+                            Thread.Sleep(150);  // longer than one heartbeat tick
+
+                            containingGroup.ScriptSetPhysicsStatus(true);
+                        }
+                        else
+                        {
+                            // Non-physical linksets don't have a physical instantiation so there is no state to
+                            //    worry about being updated.
+                            object[] parms2 = { rootPhysActor, null, linksetType };
+                            ret = MakeIntError(rootPhysActor.Extension(PhysFunctSetLinksetType, parms2));
+                        }
+                    }
+                    else
+                    {
+                        m_log.WarnFormat("{0} physSetLinksetType: root part does not have a physics actor. rootName={1}, hostID={2}",
+                                            LogHeader, rootPart.Name, hostID);
+                    }
+                }
+                else
+                {
+                    m_log.WarnFormat("{0} physSetLinksetType: root part does not exist. RequestingPartName={1}, hostID={2}",
+                                        LogHeader, requestingPart.Name, hostID);
+                }
+            }
+            else
+            {
+                m_log.WarnFormat("{0} physSetLinsetType: cannot find script object in scene. hostID={1}", LogHeader, hostID);
+            }
+            return ret;
+        }
+
+        [ScriptInvocation]
+        public int physGetLinksetType(UUID hostID, UUID scriptID)
+        {
+            int ret = -1;
+            if (!Enabled) return ret;
+
+            PhysicsActor rootPhysActor;
+            if (GetRootPhysActor(hostID, out rootPhysActor))
+            {
+                object[] parms2 = { rootPhysActor, null };
+                ret = MakeIntError(rootPhysActor.Extension(PhysFunctGetLinksetType, parms2));
+            }
+            else
+            {
+                m_log.WarnFormat("{0} physGetLinsetType: cannot find script object in scene. hostID={1}", LogHeader, hostID);
+            }
+            return ret;
+        }
+
+        [ScriptConstant]
+        public const int PHYS_LINK_TYPE_FIXED  = 1234;
+        [ScriptConstant]
+        public const int PHYS_LINK_TYPE_HINGE  = 4;
+        [ScriptConstant]
+        public const int PHYS_LINK_TYPE_SPRING = 9;
+        [ScriptConstant]
+        public const int PHYS_LINK_TYPE_6DOF   = 6;
+        [ScriptConstant]
+        public const int PHYS_LINK_TYPE_SLIDER = 7;
+
+        // physChangeLinkType(integer linkNum, integer typeCode)
+        [ScriptInvocation]
+        public int physChangeLinkType(UUID hostID, UUID scriptID, int linkNum, int typeCode)
+        {
+            int ret = -1;
+            if (!Enabled) return ret;
+
+            PhysicsActor rootPhysActor;
+            PhysicsActor childPhysActor;
+
+            if (GetRootAndChildPhysActors(hostID, linkNum, out rootPhysActor, out childPhysActor))
+            {
+                object[] parms2 = { rootPhysActor, childPhysActor, typeCode };
+                ret = MakeIntError(rootPhysActor.Extension(PhysFunctChangeLinkType, parms2));
+            }
+
+            return ret;
+        }
+
+        // physGetLinkType(integer linkNum)
+        [ScriptInvocation]
+        public int physGetLinkType(UUID hostID, UUID scriptID, int linkNum)
+        {
+            int ret = -1;
+            if (!Enabled) return ret;
+
+            PhysicsActor rootPhysActor;
+            PhysicsActor childPhysActor;
+
+            if (GetRootAndChildPhysActors(hostID, linkNum, out rootPhysActor, out childPhysActor))
+            {
+                object[] parms2 = { rootPhysActor, childPhysActor };
+                ret = MakeIntError(rootPhysActor.Extension(PhysFunctGetLinkType, parms2));
+            }
+
+            return ret;
+        }
+
+        // physChangeLinkFixed(integer linkNum)
+        // Change the link between the root and the linkNum into a fixed, static physical connection.
+        [ScriptInvocation]
+        public int physChangeLinkFixed(UUID hostID, UUID scriptID, int linkNum)
+        {
+            int ret = -1;
+            if (!Enabled) return ret;
+
+            PhysicsActor rootPhysActor;
+            PhysicsActor childPhysActor;
+
+            if (GetRootAndChildPhysActors(hostID, linkNum, out rootPhysActor, out childPhysActor))
+            {
+                object[] parms2 = { rootPhysActor, childPhysActor , PHYS_LINK_TYPE_FIXED };
+                ret = MakeIntError(rootPhysActor.Extension(PhysFunctChangeLinkType, parms2));
+            }
+
+            return ret;
+        }
+
+        // Code for specifying params.
+        // The choice if 14400 is arbitrary and only serves to catch parameter code misuse.
+        public const int PHYS_PARAM_MIN                    = 14401;
+
+        [ScriptConstant]
+        public const int PHYS_PARAM_FRAMEINA_LOC           = 14401;
+        [ScriptConstant]
+        public const int PHYS_PARAM_FRAMEINA_ROT           = 14402;
+        [ScriptConstant]
+        public const int PHYS_PARAM_FRAMEINB_LOC           = 14403;
+        [ScriptConstant]
+        public const int PHYS_PARAM_FRAMEINB_ROT           = 14404;
+        [ScriptConstant]
+        public const int PHYS_PARAM_LINEAR_LIMIT_LOW       = 14405;
+        [ScriptConstant]
+        public const int PHYS_PARAM_LINEAR_LIMIT_HIGH      = 14406;
+        [ScriptConstant]
+        public const int PHYS_PARAM_ANGULAR_LIMIT_LOW      = 14407;
+        [ScriptConstant]
+        public const int PHYS_PARAM_ANGULAR_LIMIT_HIGH     = 14408;
+        [ScriptConstant]
+        public const int PHYS_PARAM_USE_FRAME_OFFSET       = 14409;
+        [ScriptConstant]
+        public const int PHYS_PARAM_ENABLE_TRANSMOTOR      = 14410;
+        [ScriptConstant]
+        public const int PHYS_PARAM_TRANSMOTOR_MAXVEL      = 14411;
+        [ScriptConstant]
+        public const int PHYS_PARAM_TRANSMOTOR_MAXFORCE    = 14412;
+        [ScriptConstant]
+        public const int PHYS_PARAM_CFM                    = 14413;
+        [ScriptConstant]
+        public const int PHYS_PARAM_ERP                    = 14414;
+        [ScriptConstant]
+        public const int PHYS_PARAM_SOLVER_ITERATIONS      = 14415;
+        [ScriptConstant]
+        public const int PHYS_PARAM_SPRING_AXIS_ENABLE     = 14416;
+        [ScriptConstant]
+        public const int PHYS_PARAM_SPRING_DAMPING         = 14417;
+        [ScriptConstant]
+        public const int PHYS_PARAM_SPRING_STIFFNESS       = 14418;
+        [ScriptConstant]
+        public const int PHYS_PARAM_LINK_TYPE              = 14419;
+        [ScriptConstant]
+        public const int PHYS_PARAM_USE_LINEAR_FRAMEA      = 14420;
+        [ScriptConstant]
+        public const int PHYS_PARAM_SPRING_EQUILIBRIUM_POINT = 14421;
+
+        public const int PHYS_PARAM_MAX                    = 14421;
+
+        // Used when specifying a parameter that has settings for the three linear and three angular axis
+        [ScriptConstant]
+        public const int PHYS_AXIS_ALL = -1;
+        [ScriptConstant]
+        public const int PHYS_AXIS_LINEAR_ALL = -2;
+        [ScriptConstant]
+        public const int PHYS_AXIS_ANGULAR_ALL = -3;
+        [ScriptConstant]
+        public const int PHYS_AXIS_LINEAR_X  = 0;
+        [ScriptConstant]
+        public const int PHYS_AXIS_LINEAR_Y  = 1;
+        [ScriptConstant]
+        public const int PHYS_AXIS_LINEAR_Z  = 2;
+        [ScriptConstant]
+        public const int PHYS_AXIS_ANGULAR_X = 3;
+        [ScriptConstant]
+        public const int PHYS_AXIS_ANGULAR_Y = 4;
+        [ScriptConstant]
+        public const int PHYS_AXIS_ANGULAR_Z = 5;
+
+        // physChangeLinkParams(integer linkNum, [ PHYS_PARAM_*, value, PHYS_PARAM_*, value, ...])
+        [ScriptInvocation]
+        public int physChangeLinkParams(UUID hostID, UUID scriptID, int linkNum, object[] parms)
+        {
+            int ret = -1;
+            if (!Enabled) return ret;
+
+            PhysicsActor rootPhysActor;
+            PhysicsActor childPhysActor;
+
+            if (GetRootAndChildPhysActors(hostID, linkNum, out rootPhysActor, out childPhysActor))
+            {
+                object[] parms2 = AddToBeginningOfArray(rootPhysActor, childPhysActor, parms);
+                ret = MakeIntError(rootPhysActor.Extension(PhysFunctChangeLinkParams, parms2));
+            }
+
+            return ret;
+        }
+
+        private bool GetRootPhysActor(UUID hostID, out PhysicsActor rootPhysActor)
+        {
+            SceneObjectGroup containingGroup;
+            SceneObjectPart rootPart;
+            return GetRootPhysActor(hostID, out containingGroup, out rootPart, out rootPhysActor);
+        }
+
+        private bool GetRootPhysActor(UUID hostID, out SceneObjectGroup containingGroup, out SceneObjectPart rootPart, out PhysicsActor rootPhysActor)
+        {
+            bool ret = false;
+            rootPhysActor = null;
+            containingGroup = null;
+            rootPart = null;
+
+            SceneObjectPart requestingPart;
+
+            requestingPart = BaseScene.GetSceneObjectPart(hostID);
+            if (requestingPart != null)
+            {
+                // The type is is always on the root of a linkset.
+                containingGroup = requestingPart.ParentGroup;
+                if (containingGroup != null && !containingGroup.IsDeleted)
+                {
+                    rootPart = containingGroup.RootPart;
+                    if (rootPart != null)
+                    {
+                        rootPhysActor = rootPart.PhysActor;
+                        if (rootPhysActor != null)
+                        {
+                            ret = true;
+                        }
+                        else
+                        {
+                            m_log.WarnFormat("{0} GetRootAndChildPhysActors: Root part does not have a physics actor. rootName={1}, hostID={2}",
+                                            LogHeader, rootPart.Name, hostID);
+                        }
+                    }
+                    else
+                    {
+                        m_log.WarnFormat("{0} GetRootAndChildPhysActors: Root part does not exist. RequestingPartName={1}, hostID={2}",
+                                        LogHeader, requestingPart.Name, hostID);
+                    }
+                }
+                else
+                {
+                    m_log.WarnFormat("{0} GetRootAndChildPhysActors: Containing group missing or deleted. hostID={1}", LogHeader, hostID);
+                }
+            }
+            else
+            {
+                m_log.WarnFormat("{0} GetRootAndChildPhysActors: cannot find script object in scene. hostID={1}", LogHeader, hostID);
+            }
+
+            return ret;
+        }
+
+        // Find the root and child PhysActors based on the linkNum.
+        // Return 'true' if both are found and returned.
+        private bool GetRootAndChildPhysActors(UUID hostID, int linkNum, out PhysicsActor rootPhysActor, out PhysicsActor childPhysActor)
+        {
+            bool ret = false;
+            rootPhysActor = null;
+            childPhysActor = null;
+
+            SceneObjectGroup containingGroup;
+            SceneObjectPart rootPart;
+
+            if (GetRootPhysActor(hostID, out containingGroup, out rootPart, out rootPhysActor))
+            {
+                SceneObjectPart linkPart = containingGroup.GetLinkNumPart(linkNum);
+                if (linkPart != null)
+                {
+                    childPhysActor = linkPart.PhysActor;
+                    if (childPhysActor != null)
+                    {
+                        ret = true;
+                    }
+                    else
+                    {
+                        m_log.WarnFormat("{0} GetRootAndChildPhysActors: Link part has no physical actor. rootName={1}, hostID={2}, linknum={3}",
+                                            LogHeader, rootPart.Name, hostID, linkNum);
+                    }
+                }
+                else
+                {
+                    m_log.WarnFormat("{0} GetRootAndChildPhysActors: Could not find linknum part. rootName={1}, hostID={2}, linknum={3}",
+                                        LogHeader, rootPart.Name, hostID, linkNum);
+                }
+            }
+            else
+            {
+                m_log.WarnFormat("{0} GetRootAndChildPhysActors: Root part does not have a physics actor. rootName={1}, hostID={2}",
+                                LogHeader, rootPart.Name, hostID);
+            }
+
+            return ret;
+        }
+
+        // Return an array of objects with the passed object as the first object of a new array
+        private object[] AddToBeginningOfArray(object firstOne, object secondOne, object[] prevArray)
+        {
+            object[] newArray = new object[2 + prevArray.Length];
+            newArray[0] = firstOne;
+            newArray[1] = secondOne;
+            prevArray.CopyTo(newArray, 2);
+            return newArray;
+        }
+
+        // Extension() returns an object. Convert that object into the integer error we expect to return.
+        private int MakeIntError(object extensionRet)
+        {
+            int ret = -1;
+            if (extensionRet != null)
+            {
+                try
+                {
+                    ret = (int)extensionRet;
+                }
+                catch
+                {
+                    ret = -1;
+                }
+            }
+            return ret;
+        }
+    }
+}
diff --git a/OpenSim/Region/PhysicsModules/BulletS/Properties/AssemblyInfo.cs b/OpenSim/Region/PhysicsModules/BulletS/Properties/AssemblyInfo.cs
new file mode 100644
index 0000000..698be39
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/Properties/AssemblyInfo.cs
@@ -0,0 +1,36 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+using System.Runtime.InteropServices;
+using Mono.Addins;
+
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+[assembly: AssemblyTitle("OpenSim.Region.Physics.BulletSPlugin")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("http://opensimulator.org")]
+[assembly: AssemblyProduct("OpenSim")]
+[assembly: AssemblyCopyright("OpenSimulator developers")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+// Setting ComVisible to false makes the types in this assembly not visible 
+// to COM components.  If you need to access a type in this assembly from 
+// COM, set the ComVisible attribute to true on that type.
+[assembly: ComVisible(false)]
+
+// The following GUID is for the ID of the typelib if this project is exposed to COM
+[assembly: Guid("520ea11b-20cb-449d-ba05-c01015fed841")]
+
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+[assembly: AssemblyVersion("0.8.3.*")]
+
+[assembly: Addin("OpenSim.Region.PhysicsModule.BulletS", OpenSim.VersionInfo.VersionNumber)]
+[assembly: AddinDependency("OpenSim.Region.Framework", OpenSim.VersionInfo.VersionNumber)]
diff --git a/OpenSim/Region/PhysicsModules/BulletS/Tests/BasicVehicles.cs b/OpenSim/Region/PhysicsModules/BulletS/Tests/BasicVehicles.cs
new file mode 100755
index 0000000..35eba29
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/Tests/BasicVehicles.cs
@@ -0,0 +1,156 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Text;
+
+using NUnit.Framework;
+using log4net;
+
+using OpenSim.Framework;
+using OpenSim.Region.PhysicsModule.BulletS;
+using OpenSim.Region.PhysicsModules.SharedBase;
+using OpenSim.Tests.Common;
+
+using OpenMetaverse;
+
+namespace OpenSim.Region.PhysicsModule.BulletS.Tests
+{
+[TestFixture]
+public class BasicVehicles : OpenSimTestCase
+{
+    // Documentation on attributes: http://www.nunit.org/index.php?p=attributes&r=2.6.1
+    // Documentation on assertions: http://www.nunit.org/index.php?p=assertions&r=2.6.1
+
+    BSScene PhysicsScene { get; set; }
+    BSPrim TestVehicle { get; set; }
+    Vector3 TestVehicleInitPosition { get; set; }
+    float simulationTimeStep = 0.089f;
+
+    [TestFixtureSetUp]
+    public void Init()
+    {
+        Dictionary<string, string> engineParams = new Dictionary<string, string>();
+        engineParams.Add("VehicleEnableAngularVerticalAttraction", "true");
+        engineParams.Add("VehicleAngularVerticalAttractionAlgorithm", "1");
+        PhysicsScene = BulletSimTestsUtil.CreateBasicPhysicsEngine(engineParams);
+
+        PrimitiveBaseShape pbs = PrimitiveBaseShape.CreateSphere();
+        Vector3 pos = new Vector3(100.0f, 100.0f, 0f);
+        pos.Z = PhysicsScene.TerrainManager.GetTerrainHeightAtXYZ(pos) + 2f;
+        TestVehicleInitPosition = pos;
+        Vector3 size = new Vector3(1f, 1f, 1f);
+        pbs.Scale = size;
+        Quaternion rot = Quaternion.Identity;
+        bool isPhys = false;
+        uint localID = 123;
+
+        PhysicsScene.AddPrimShape("testPrim", pbs, pos, size, rot, isPhys, localID);
+        TestVehicle = (BSPrim)PhysicsScene.PhysObjects[localID];
+        // The actual prim shape creation happens at taint time
+        PhysicsScene.ProcessTaints();
+
+    }
+
+    [TestFixtureTearDown]
+    public void TearDown()
+    {
+        if (PhysicsScene != null)
+        {
+            // The Dispose() will also free any physical objects in the scene
+            PhysicsScene.Dispose();
+            PhysicsScene = null;
+        }
+    }
+
+    [TestCase(2f, 0.2f,  0.25f,  0.25f,  0.25f)]
+    [TestCase(2f, 0.2f, -0.25f,  0.25f,  0.25f)]
+    [TestCase(2f, 0.2f,  0.25f, -0.25f,  0.25f)]
+    [TestCase(2f, 0.2f, -0.25f, -0.25f,  0.25f)]
+    // [TestCase(2f, 0.2f, 0.785f,   0.0f,  0.25f) /*, "Leaning 45 degrees to the side" */]
+    // [TestCase(2f, 0.2f, 1.650f,   0.0f,  0.25f) /*, "Leaning more than 90 degrees to the side" */]
+    // [TestCase(2f, 0.2f, 2.750f,   0.0f,  0.25f) /*, "Almost upside down, tipped right" */]
+    // [TestCase(2f, 0.2f,-2.750f,   0.0f,  0.25f) /*, "Almost upside down, tipped left" */]
+    // [TestCase(2f, 0.2f,   0.0f, 0.785f,  0.25f) /*, "Tipped back 45 degrees" */]
+    // [TestCase(2f, 0.2f,   0.0f, 1.650f,  0.25f) /*, "Tipped back more than 90 degrees" */]
+    // [TestCase(2f, 0.2f,   0.0f, 2.750f,  0.25f) /*, "Almost upside down, tipped back" */]
+    // [TestCase(2f, 0.2f,   0.0f,-2.750f,  0.25f) /*, "Almost upside down, tipped forward" */]
+    public void AngularVerticalAttraction(float timeScale, float efficiency, float initRoll, float initPitch, float initYaw)
+    {
+        // Enough simulation steps to cover the timescale the operation should take
+        int simSteps = (int)(timeScale / simulationTimeStep) + 1;
+
+        // Tip the vehicle
+        Quaternion initOrientation = Quaternion.CreateFromEulers(initRoll, initPitch, initYaw);
+        TestVehicle.Orientation = initOrientation;
+
+        TestVehicle.Position = TestVehicleInitPosition;
+
+        // The vehicle controller is not enabled directly (by setting a vehicle type).
+        //    Instead the appropriate values are set and calls are made just the parts of the
+        //    controller we want to exercise. Stepping the physics engine then applies
+        //    the actions of that one feature.
+        BSDynamics vehicleActor = TestVehicle.GetVehicleActor(true /* createIfNone */);
+        if (vehicleActor != null)
+        {
+            vehicleActor.ProcessFloatVehicleParam(Vehicle.VERTICAL_ATTRACTION_EFFICIENCY, efficiency);
+            vehicleActor.ProcessFloatVehicleParam(Vehicle.VERTICAL_ATTRACTION_TIMESCALE, timeScale);
+            // vehicleActor.enableAngularVerticalAttraction = true;
+
+            TestVehicle.IsPhysical = true;
+            PhysicsScene.ProcessTaints();
+
+            // Step the simulator a bunch of times and vertical attraction should orient the vehicle up
+            for (int ii = 0; ii < simSteps; ii++)
+            {
+                vehicleActor.ForgetKnownVehicleProperties();
+                vehicleActor.ComputeAngularVerticalAttraction();
+                vehicleActor.PushKnownChanged();
+
+                PhysicsScene.Simulate(simulationTimeStep);
+            }
+        }
+
+        TestVehicle.IsPhysical = false;
+        PhysicsScene.ProcessTaints();
+
+        // After these steps, the vehicle should be upright
+        /*
+        float finalRoll, finalPitch, finalYaw;
+        TestVehicle.Orientation.GetEulerAngles(out finalRoll, out finalPitch, out finalYaw);
+        Assert.That(finalRoll, Is.InRange(-0.01f, 0.01f));
+        Assert.That(finalPitch, Is.InRange(-0.01f, 0.01f));
+        Assert.That(finalYaw, Is.InRange(initYaw - 0.1f, initYaw + 0.1f));
+         */
+
+        Vector3 upPointer = Vector3.UnitZ * TestVehicle.Orientation;
+        Assert.That(upPointer.Z, Is.GreaterThan(0.99f));
+    }
+}
+}
\ No newline at end of file
diff --git a/OpenSim/Region/PhysicsModules/BulletS/Tests/BulletSimTests.cs b/OpenSim/Region/PhysicsModules/BulletS/Tests/BulletSimTests.cs
new file mode 100755
index 0000000..0be1f4c
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/Tests/BulletSimTests.cs
@@ -0,0 +1,56 @@
+/*

+ * Copyright (c) Contributors, http://opensimulator.org/

+ * See CONTRIBUTORS.TXT for a full list of copyright holders.

+ *

+ * Redistribution and use in source and binary forms, with or without

+ * modification, are permitted provided that the following conditions are met:

+ *     * Redistributions of source code must retain the above copyright

+ *       notice, this list of conditions and the following disclaimer.

+ *     * Redistributions in binary form must reproduce the above copyright

+ *       notice, this list of conditions and the following disclaimer in the

+ *       documentation and/or other materials provided with the distribution.

+ *     * Neither the name of the OpenSimulator Project nor the

+ *       names of its contributors may be used to endorse or promote products

+ *       derived from this software without specific prior written permission.

+ *

+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY

+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY

+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;

+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND

+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS

+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

+ */

+

+using System;

+using System.Collections.Generic;

+using System.Linq;

+using System.Text;

+

+using NUnit.Framework;

+using log4net;

+

+using OpenSim.Tests.Common;

+

+namespace OpenSim.Region.PhysicsModule.BulletS.Tests

+{

+[TestFixture]

+public class BulletSimTests : OpenSimTestCase

+{

+    // Documentation on attributes: http://www.nunit.org/index.php?p=attributes&r=2.6.1

+    // Documentation on assertions: http://www.nunit.org/index.php?p=assertions&r=2.6.1

+

+    [TestFixtureSetUp]

+    public void Init()

+    {

+    }

+

+    [TestFixtureTearDown]

+    public void TearDown()

+    {

+    }

+}

+}

diff --git a/OpenSim/Region/PhysicsModules/BulletS/Tests/BulletSimTestsUtil.cs b/OpenSim/Region/PhysicsModules/BulletS/Tests/BulletSimTestsUtil.cs
new file mode 100755
index 0000000..4eeea4d
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/Tests/BulletSimTestsUtil.cs
@@ -0,0 +1,109 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+using System;
+using System.IO;
+using System.Collections.Generic;
+using System.Text;
+
+using Nini.Config;
+
+using OpenSim.Framework;
+using OpenSim.Region.PhysicsModules.SharedBase;
+using OpenSim.Region.PhysicsModules.Meshing;
+using OpenSim.Region.Framework.Interfaces;
+
+using OpenMetaverse;
+
+namespace OpenSim.Region.PhysicsModule.BulletS.Tests
+{
+// Utility functions for building up and tearing down the sample physics environments
+public static class BulletSimTestsUtil
+{
+    // 'engineName' is the Bullet engine to use. Either null (for unmanaged), "BulletUnmanaged" or "BulletXNA"
+    // 'params' is a set of keyValue pairs to set in the engine's configuration file (override defaults)
+    //      May be 'null' if there are no overrides.
+    public static BSScene CreateBasicPhysicsEngine(Dictionary<string,string> paramOverrides)
+    {
+        IConfigSource openSimINI = new IniConfigSource();
+        IConfig startupConfig = openSimINI.AddConfig("Startup");
+        startupConfig.Set("physics", "BulletSim");
+        startupConfig.Set("meshing", "Meshmerizer");
+        startupConfig.Set("cacheSculptMaps", "false");  // meshmerizer shouldn't save maps
+
+        IConfig bulletSimConfig = openSimINI.AddConfig("BulletSim");
+        // If the caller cares, specify the bullet engine otherwise it will default to "BulletUnmanaged".
+        // bulletSimConfig.Set("BulletEngine", "BulletUnmanaged");
+        // bulletSimConfig.Set("BulletEngine", "BulletXNA");
+        bulletSimConfig.Set("MeshSculptedPrim", "false");
+        bulletSimConfig.Set("ForceSimplePrimMeshing", "true");
+        if (paramOverrides != null)
+        {
+            foreach (KeyValuePair<string, string> kvp in paramOverrides)
+            {
+                bulletSimConfig.Set(kvp.Key, kvp.Value);
+            }
+        }
+
+        // If a special directory exists, put detailed logging therein.
+        // This allows local testing/debugging without having to worry that the build engine will output logs.
+        if (Directory.Exists("physlogs"))
+        {
+            bulletSimConfig.Set("PhysicsLoggingDir","./physlogs");
+            bulletSimConfig.Set("PhysicsLoggingEnabled","True");
+            bulletSimConfig.Set("PhysicsLoggingDoFlush","True");
+            bulletSimConfig.Set("VehicleLoggingEnabled","True");
+        }
+
+        Vector3 regionExtent = new Vector3(Constants.RegionSize, Constants.RegionSize, Constants.RegionHeight);
+       
+        RegionInfo info = new RegionInfo();
+        info.RegionName = "BSTestRegion";
+        info.RegionSizeX = info.RegionSizeY = info.RegionSizeZ = Constants.RegionSize;
+        OpenSim.Region.Framework.Scenes.Scene scene = new OpenSim.Region.Framework.Scenes.Scene(info);
+
+        IMesher mesher = new OpenSim.Region.PhysicsModules.Meshing.Meshmerizer();
+        INonSharedRegionModule mod = mesher as INonSharedRegionModule;
+        mod.Initialise(openSimINI);
+        mod.AddRegion(scene);
+        mod.RegionLoaded(scene);
+
+        BSScene pScene = new BSScene();
+        mod = (pScene as INonSharedRegionModule);
+        mod.Initialise(openSimINI);
+        mod.AddRegion(scene);
+        mod.RegionLoaded(scene);
+
+        // Since the asset requestor is not initialized, any mesh or sculptie will be a cube.
+        // In the future, add a fake asset fetcher to get meshes and sculpts.
+        // bsScene.RequestAssetMethod = ???;
+
+        return pScene;
+    }
+
+}
+}
diff --git a/OpenSim/Region/PhysicsModules/BulletS/Tests/HullCreation.cs b/OpenSim/Region/PhysicsModules/BulletS/Tests/HullCreation.cs
new file mode 100644
index 0000000..c0cf19a
--- /dev/null
+++ b/OpenSim/Region/PhysicsModules/BulletS/Tests/HullCreation.cs
@@ -0,0 +1,205 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Text;
+
+using NUnit.Framework;
+using log4net;
+
+using OpenSim.Framework;
+using OpenSim.Region.PhysicsModule.BulletS;
+using OpenSim.Region.PhysicsModules.SharedBase;
+using OpenSim.Tests.Common;
+
+using OpenMetaverse;
+
+namespace OpenSim.Region.PhysicsModule.BulletS.Tests
+{
+[TestFixture]
+public class HullCreation : OpenSimTestCase
+{
+    // Documentation on attributes: http://www.nunit.org/index.php?p=attributes&r=2.6.1
+    // Documentation on assertions: http://www.nunit.org/index.php?p=assertions&r=2.6.1
+
+    BSScene PhysicsScene { get; set; }
+    Vector3 ObjectInitPosition;
+
+    [TestFixtureSetUp]
+    public void Init()
+    {
+
+    }
+
+    [TestFixtureTearDown]
+    public void TearDown()
+    {
+        if (PhysicsScene != null)
+        {
+            // The Dispose() will also free any physical objects in the scene
+            PhysicsScene.Dispose();
+            PhysicsScene = null;
+        }
+    }
+
+    [TestCase(7, 2, 5f, 5f, 32, 0f)]    /* default hull parameters */
+    public void GeomHullConvexDecomp( int maxDepthSplit,
+                                        int maxDepthSplitForSimpleShapes,
+                                        float concavityThresholdPercent,
+                                        float volumeConservationThresholdPercent,
+                                        int maxVertices,
+                                        float maxSkinWidth)
+    {
+        // Setup the physics engine to use the C# version of convex decomp
+        Dictionary<string, string> engineParams = new Dictionary<string, string>();
+        engineParams.Add("MeshSculptedPrim", "true"); // ShouldMeshSculptedPrim
+        engineParams.Add("ForceSimplePrimMeshing", "false"); // ShouldForceSimplePrimMeshing
+        engineParams.Add("UseHullsForPhysicalObjects", "true"); // ShouldUseHullsForPhysicalObjects
+        engineParams.Add("ShouldRemoveZeroWidthTriangles", "true");
+        engineParams.Add("ShouldUseBulletHACD", "false");
+        engineParams.Add("ShouldUseSingleConvexHullForPrims", "true");
+        engineParams.Add("ShouldUseGImpactShapeForPrims", "false");
+        engineParams.Add("ShouldUseAssetHulls", "true");
+
+        engineParams.Add("CSHullMaxDepthSplit", maxDepthSplit.ToString());
+        engineParams.Add("CSHullMaxDepthSplitForSimpleShapes", maxDepthSplitForSimpleShapes.ToString());
+        engineParams.Add("CSHullConcavityThresholdPercent", concavityThresholdPercent.ToString());
+        engineParams.Add("CSHullVolumeConservationThresholdPercent", volumeConservationThresholdPercent.ToString());
+        engineParams.Add("CSHullMaxVertices", maxVertices.ToString());
+        engineParams.Add("CSHullMaxSkinWidth", maxSkinWidth.ToString());
+
+        PhysicsScene = BulletSimTestsUtil.CreateBasicPhysicsEngine(engineParams);
+
+        PrimitiveBaseShape pbs;
+        Vector3 pos;
+        Vector3 size;
+        Quaternion rot;
+        bool isPhys;
+
+        // Cylinder
+        pbs = PrimitiveBaseShape.CreateCylinder();
+        pos = new Vector3(100.0f, 100.0f, 0f);
+        pos.Z = PhysicsScene.TerrainManager.GetTerrainHeightAtXYZ(pos) + 10f;
+        ObjectInitPosition = pos;
+        size = new Vector3(2f, 2f, 2f);
+        pbs.Scale = size;
+        rot = Quaternion.Identity;
+        isPhys = true;
+        uint cylinderLocalID = 123;
+        PhysicsScene.AddPrimShape("testCylinder", pbs, pos, size, rot, isPhys, cylinderLocalID);
+        BSPrim primTypeCylinder = (BSPrim)PhysicsScene.PhysObjects[cylinderLocalID];
+
+        // Hollow Cylinder
+        pbs = PrimitiveBaseShape.CreateCylinder();
+        pbs.ProfileHollow = (ushort)(0.70f * 50000);
+        pos = new Vector3(110.0f, 110.0f, 0f);
+        pos.Z = PhysicsScene.TerrainManager.GetTerrainHeightAtXYZ(pos) + 10f;
+        ObjectInitPosition = pos;
+        size = new Vector3(2f, 2f, 2f);
+        pbs.Scale = size;
+        rot = Quaternion.Identity;
+        isPhys = true;
+        uint hollowCylinderLocalID = 124;
+        PhysicsScene.AddPrimShape("testHollowCylinder", pbs, pos, size, rot, isPhys, hollowCylinderLocalID);
+        BSPrim primTypeHollowCylinder = (BSPrim)PhysicsScene.PhysObjects[hollowCylinderLocalID];
+
+        // Torus
+        // ProfileCurve = Circle, PathCurve = Curve1
+        pbs = PrimitiveBaseShape.CreateSphere();
+        pbs.ProfileShape = (byte)ProfileShape.Circle;
+        pbs.PathCurve = (byte)Extrusion.Curve1;
+        pbs.PathScaleX = 100;   // default hollow info as set in the viewer
+        pbs.PathScaleY = (int)(.25f / 0.01f) + 200;
+        pos = new Vector3(120.0f, 120.0f, 0f);
+        pos.Z = PhysicsScene.TerrainManager.GetTerrainHeightAtXYZ(pos) + 10f;
+        ObjectInitPosition = pos;
+        size = new Vector3(2f, 4f, 4f);
+        pbs.Scale = size;
+        rot = Quaternion.Identity;
+        isPhys = true;
+        uint torusLocalID = 125;
+        PhysicsScene.AddPrimShape("testTorus", pbs, pos, size, rot, isPhys, torusLocalID);
+        BSPrim primTypeTorus = (BSPrim)PhysicsScene.PhysObjects[torusLocalID];
+        
+        // The actual prim shape creation happens at taint time
+        PhysicsScene.ProcessTaints();
+
+        // Check out the created hull shapes and report their characteristics
+        ReportShapeGeom(primTypeCylinder);
+        ReportShapeGeom(primTypeHollowCylinder);
+        ReportShapeGeom(primTypeTorus);
+    }
+
+    [TestCase]
+    public void GeomHullBulletHACD()
+    {
+        // Cylinder
+        // Hollow Cylinder
+        // Torus
+    }
+
+    private void ReportShapeGeom(BSPrim prim)
+    {
+        if (prim != null)
+        {
+            if (prim.PhysShape.HasPhysicalShape)
+            {
+                BSShape physShape = prim.PhysShape;
+                string shapeType = physShape.GetType().ToString();
+                switch (shapeType)
+                {
+                    case "OpenSim.Region.Physics.BulletSPlugin.BSShapeNative":
+                        BSShapeNative nShape = physShape as BSShapeNative;
+                        prim.PhysScene.DetailLog("{0}, type={1}", prim.Name, shapeType);
+                        break;
+                    case "OpenSim.Region.Physics.BulletSPlugin.BSShapeMesh":
+                        BSShapeMesh mShape = physShape as BSShapeMesh;
+                        prim.PhysScene.DetailLog("{0}, mesh, shapeInfo={1}", prim.Name, mShape.shapeInfo);
+                        break;
+                    case "OpenSim.Region.Physics.BulletSPlugin.BSShapeHull":
+                        // BSShapeHull hShape = physShape as BSShapeHull;
+                        // prim.PhysScene.DetailLog("{0}, hull, shapeInfo={1}", prim.Name, hShape.shapeInfo);
+                        break;
+                    case "OpenSim.Region.Physics.BulletSPlugin.BSShapeConvexHull":
+                        BSShapeConvexHull chShape = physShape as BSShapeConvexHull;
+                        prim.PhysScene.DetailLog("{0}, convexHull, shapeInfo={1}", prim.Name, chShape.shapeInfo);
+                        break;
+                    case "OpenSim.Region.Physics.BulletSPlugin.BSShapeCompound":
+                        BSShapeCompound cShape = physShape as BSShapeCompound;
+                        prim.PhysScene.DetailLog("{0}, type={1}", prim.Name, shapeType);
+                        break;
+                    default:
+                        prim.PhysScene.DetailLog("{0}, type={1}", prim.Name, shapeType);
+                        break;
+                }
+            }
+        }
+    }
+}
+}
\ No newline at end of file