1 files changed, 3287 insertions, 0 deletions

diff --git a/OpenSim/Region/Physics/ChOdePlugin/ODEPrim.cs b/OpenSim/Region/Physics/ChOdePlugin/ODEPrim.cs
new file mode 100644
index 0000000..29a3dd9
--- /dev/null
+++ b/OpenSim/Region/Physics/ChOdePlugin/ODEPrim.cs
@@ -0,0 +1,3287 @@
+/* Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Revised August 26 2009 by Kitto Flora. ODEDynamics.cs replaces
+ * ODEVehicleSettings.cs. It and ODEPrim.cs are re-organised:
+ * ODEPrim.cs contains methods dealing with Prim editing, Prim
+ * characteristics and Kinetic motion.
+ * ODEDynamics.cs contains methods dealing with Prim Physical motion
+ * (dynamics) and the associated settings. Old Linear and angular
+ * motors for dynamic motion have been replace with  MoveLinear()
+ * and MoveAngular(); 'Physical' is used only to switch ODE dynamic 
+ * simualtion on/off; VEHICAL_TYPE_NONE/VEHICAL_TYPE_<other> is to
+ * switch between 'VEHICLE' parameter use and general dynamics
+ * settings use.
+ */
+
+/*
+ * Revised August 26 2009 by Kitto Flora. ODEDynamics.cs replaces
+ * ODEVehicleSettings.cs. It and ODEPrim.cs are re-organised:
+ * ODEPrim.cs contains methods dealing with Prim editing, Prim
+ * characteristics and Kinetic motion.
+ * ODEDynamics.cs contains methods dealing with Prim Physical motion
+ * (dynamics) and the associated settings. Old Linear and angular
+ * motors for dynamic motion have been replace with  MoveLinear()
+ * and MoveAngular(); 'Physical' is used only to switch ODE dynamic 
+ * simualtion on/off; VEHICAL_TYPE_NONE/VEHICAL_TYPE_<other> is to
+ * switch between 'VEHICLE' parameter use and general dynamics
+ * settings use.
+ */
+using System;
+using System.Collections.Generic;
+using System.Reflection;
+using System.Runtime.InteropServices;
+using System.Threading;
+using log4net;
+using OpenMetaverse;
+using Ode.NET;
+using OpenSim.Framework;
+using OpenSim.Region.Physics.Manager;
+
+namespace OpenSim.Region.Physics.OdePlugin
+{
+    /// <summary>
+    /// Various properties that ODE uses for AMotors but isn't exposed in ODE.NET so we must define them ourselves.
+    /// </summary>
+
+    public class OdePrim : PhysicsActor
+    {
+        private static readonly ILog m_log = LogManager.GetLogger(MethodBase.GetCurrentMethod().DeclaringType);
+
+        private Vector3 _position;
+        private Vector3 _velocity;
+        private Vector3 _torque;
+        private Vector3 m_lastVelocity;
+        private Vector3 m_lastposition;
+        private Quaternion m_lastorientation = new Quaternion();
+        private Vector3 m_rotationalVelocity;
+        private Vector3 _size;
+        private Vector3 _acceleration;
+        // private d.Vector3 _zeroPosition = new d.Vector3(0.0f, 0.0f, 0.0f);
+        private Quaternion _orientation;
+        private Vector3 m_taintposition;
+        private Vector3 m_taintsize;
+        private Vector3 m_taintVelocity;
+        private Vector3 m_taintTorque;
+        private Quaternion m_taintrot;
+        private Vector3 m_angularlock = Vector3.One;
+        private Vector3 m_taintAngularLock = Vector3.One;
+        private IntPtr Amotor = IntPtr.Zero;
+
+        private Vector3 m_PIDTarget;
+        private float m_PIDTau;
+        private float PID_D = 35f;
+        private float PID_G = 25f;
+        private bool m_usePID = false;
+        
+        private Quaternion m_APIDTarget = new Quaternion();
+        private float m_APIDStrength = 0.5f;
+        private float m_APIDDamping = 0.5f;
+        private bool m_useAPID = false;
+
+        // KF: These next 7 params apply to llSetHoverHeight(float height, integer water, float tau),
+        // and are for non-VEHICLES only.
+
+        private float m_PIDHoverHeight;
+        private float m_PIDHoverTau;
+        private bool m_useHoverPID;
+        private PIDHoverType m_PIDHoverType = PIDHoverType.Ground;
+        private float m_targetHoverHeight;
+        private float m_groundHeight;
+        private float m_waterHeight;
+        private float m_buoyancy;                               //KF: m_buoyancy should be set by llSetBuoyancy() for non-vehicle. 
+
+        // private float m_tensor = 5f;
+        private int body_autodisable_frames = 20;
+
+
+        private const CollisionCategories m_default_collisionFlags = (CollisionCategories.Geom
+                                                        | CollisionCategories.Space
+                                                        | CollisionCategories.Body
+                                                        | CollisionCategories.Character
+                                                        );
+        private bool m_taintshape;
+        private bool m_taintPhysics;
+        private bool m_collidesLand = true;
+        private bool m_collidesWater;
+        public bool m_returnCollisions;
+
+        // Default we're a Geometry
+        private CollisionCategories m_collisionCategories = (CollisionCategories.Geom);
+
+        // Default, Collide with Other Geometries, spaces and Bodies
+        private CollisionCategories m_collisionFlags = m_default_collisionFlags;
+
+        public bool m_taintremove;
+        public bool m_taintdisable;
+        public bool m_disabled;
+        public bool m_taintadd;
+        public bool m_taintselected;
+        public bool m_taintCollidesWater;
+
+        public uint m_localID;
+
+        //public GCHandle gc;
+        private CollisionLocker ode;
+
+        private bool m_taintforce = false;
+        private bool m_taintaddangularforce = false;
+        private Vector3 m_force;
+        private List<Vector3> m_forcelist = new List<Vector3>();
+        private List<Vector3> m_angularforcelist = new List<Vector3>();
+
+        private IMesh _mesh;
+        private PrimitiveBaseShape _pbs;
+        private OdeScene _parent_scene;
+        public IntPtr m_targetSpace = IntPtr.Zero;
+        public IntPtr prim_geom;
+        public IntPtr prev_geom;
+        public IntPtr _triMeshData;
+
+        private IntPtr _linkJointGroup = IntPtr.Zero;
+        private PhysicsActor _parent;
+        private PhysicsActor m_taintparent;
+
+        private List<OdePrim> childrenPrim = new List<OdePrim>();
+
+        private bool iscolliding;
+        private bool m_isphysical;
+        private bool m_isSelected;
+
+        internal bool m_isVolumeDetect; // If true, this prim only detects collisions but doesn't collide actively
+
+        private bool m_throttleUpdates;
+        private int throttleCounter;
+        public int m_interpenetrationcount;
+        public float m_collisionscore;
+        public int m_roundsUnderMotionThreshold;
+        private int m_crossingfailures;
+
+        public bool outofBounds;
+        private float m_density = 10.000006836f; // Aluminum g/cm3;
+
+        public bool _zeroFlag;
+        private bool m_lastUpdateSent;
+
+        public IntPtr Body = IntPtr.Zero;
+        public String m_primName;
+        private Vector3 _target_velocity;
+        public d.Mass pMass;
+
+        public int m_eventsubscription;
+        private CollisionEventUpdate CollisionEventsThisFrame;
+
+        private IntPtr m_linkJoint = IntPtr.Zero;
+
+        public volatile bool childPrim;
+
+        private ODEDynamics m_vehicle;
+
+        internal int m_material = (int)Material.Wood;
+        
+        private int frcount = 0;                                                                                // Used to limit dynamics debug output to 
+
+
+        public OdePrim(String primName, OdeScene parent_scene, Vector3 pos, Vector3 size,
+                       Quaternion rotation, IMesh mesh, PrimitiveBaseShape pbs, bool pisPhysical, CollisionLocker dode)
+        {
+            m_vehicle = new ODEDynamics();
+            //gc = GCHandle.Alloc(prim_geom, GCHandleType.Pinned);
+            ode = dode;
+            if (!pos.IsFinite())
+            {
+                pos = new Vector3(((float)Constants.RegionSize * 0.5f), ((float)Constants.RegionSize * 0.5f),
+                    parent_scene.GetTerrainHeightAtXY(((float)Constants.RegionSize * 0.5f), ((float)Constants.RegionSize * 0.5f)) + 0.5f);
+                m_log.Warn("[PHYSICS]: Got nonFinite Object create Position");
+            }
+            
+            _position = pos;
+            m_taintposition = pos;
+            PID_D = parent_scene.bodyPIDD;
+            PID_G = parent_scene.bodyPIDG;
+            m_density = parent_scene.geomDefaultDensity;
+            // m_tensor = parent_scene.bodyMotorJointMaxforceTensor;
+            body_autodisable_frames = parent_scene.bodyFramesAutoDisable;
+
+
+            prim_geom = IntPtr.Zero;
+            prev_geom = IntPtr.Zero;
+
+            if (!pos.IsFinite())
+            {
+                size = new Vector3(0.5f, 0.5f, 0.5f);
+                m_log.Warn("[PHYSICS]: Got nonFinite Object create Size");
+            }
+
+            if (size.X <= 0) size.X = 0.01f;
+            if (size.Y <= 0) size.Y = 0.01f;
+            if (size.Z <= 0) size.Z = 0.01f;
+
+            _size = size;
+            m_taintsize = _size;
+
+            if (!QuaternionIsFinite(rotation))
+            {
+                rotation = Quaternion.Identity;
+                m_log.Warn("[PHYSICS]: Got nonFinite Object create Rotation");
+            }
+
+            _orientation = rotation;
+            m_taintrot = _orientation;
+            _mesh = mesh;
+            _pbs = pbs;
+
+            _parent_scene = parent_scene;
+            m_targetSpace = (IntPtr)0;
+
+//            if (pos.Z < 0)
+            if (pos.Z < parent_scene.GetTerrainHeightAtXY(pos.X, pos.Y))
+                m_isphysical = false;
+            else
+            {
+                m_isphysical = pisPhysical;
+                // If we're physical, we need to be in the master space for now.
+                // linksets *should* be in a space together..  but are not currently
+                if (m_isphysical)
+                    m_targetSpace = _parent_scene.space;
+            }
+            m_primName = primName;
+            m_taintadd = true;
+            _parent_scene.AddPhysicsActorTaint(this);
+            //  don't do .add() here; old geoms get recycled with the same hash
+        }
+
+        public override int PhysicsActorType
+        {
+            get { return (int) ActorTypes.Prim; }
+            set { return; }
+        }
+
+        public override bool SetAlwaysRun
+        {
+            get { return false; }
+            set { return; }
+        }
+
+        public override uint LocalID
+        {
+            set {
+                //m_log.Info("[PHYSICS]: Setting TrackerID: " + value);
+                m_localID = value; }
+        }
+
+        public override bool Grabbed
+        {
+            set { return; }
+        }
+
+        public override bool Selected
+        {
+            set {
+        
+            
+                // This only makes the object not collidable if the object
+                // is physical or the object is modified somehow *IN THE FUTURE*
+                // without this, if an avatar selects prim, they can walk right
+                // through it while it's selected
+                m_collisionscore = 0;
+                if ((m_isphysical && !_zeroFlag) || !value)
+                {
+                    m_taintselected = value;
+                    _parent_scene.AddPhysicsActorTaint(this);
+                }
+                else
+                {
+                    m_taintselected = value;
+                    m_isSelected = value;
+                }
+                if(m_isSelected) disableBodySoft();         
+            }
+        }
+
+        public void SetGeom(IntPtr geom)
+        {
+            prev_geom = prim_geom;
+            prim_geom = geom;
+//Console.WriteLine("SetGeom to " + prim_geom + " for " + m_primName);     
+            if (prim_geom != IntPtr.Zero)
+            {
+                d.GeomSetCategoryBits(prim_geom, (int)m_collisionCategories);
+                d.GeomSetCollideBits(prim_geom, (int)m_collisionFlags);
+            }
+
+            if (childPrim)
+            {
+                if (_parent != null && _parent is OdePrim)
+                {
+                    OdePrim parent = (OdePrim)_parent;
+//Console.WriteLine("SetGeom calls ChildSetGeom");                    
+                    parent.ChildSetGeom(this);
+                }
+            }
+            //m_log.Warn("Setting Geom to: " + prim_geom);
+        }
+
+        
+
+        public void enableBodySoft()
+        {
+            if (!childPrim)
+            {
+                if (m_isphysical && Body != IntPtr.Zero)
+                {
+                    d.BodyEnable(Body);
+                    if (m_vehicle.Type != Vehicle.TYPE_NONE)
+                            m_vehicle.Enable(Body, _parent_scene);
+                }
+
+                m_disabled = false;
+            }
+        }
+
+        public void disableBodySoft()
+        {
+            m_disabled = true;
+
+            if (m_isphysical && Body != IntPtr.Zero)
+            {
+                d.BodyDisable(Body);
+            }
+        }
+
+        public void enableBody()
+        {
+            // Don't enable this body if we're a child prim
+            // this should be taken care of in the parent function not here
+            if (!childPrim)
+            {
+                // Sets the geom to a body
+                Body = d.BodyCreate(_parent_scene.world);
+
+                setMass();
+                d.BodySetPosition(Body, _position.X, _position.Y, _position.Z);
+                d.Quaternion myrot = new d.Quaternion();
+                myrot.X = _orientation.X;
+                myrot.Y = _orientation.Y;
+                myrot.Z = _orientation.Z;
+                myrot.W = _orientation.W;
+                d.BodySetQuaternion(Body, ref myrot);
+                d.GeomSetBody(prim_geom, Body);
+                m_collisionCategories |= CollisionCategories.Body;
+                m_collisionFlags |= (CollisionCategories.Land | CollisionCategories.Wind);
+
+                d.GeomSetCategoryBits(prim_geom, (int)m_collisionCategories);
+                d.GeomSetCollideBits(prim_geom, (int)m_collisionFlags);
+
+                d.BodySetAutoDisableFlag(Body, true);
+                d.BodySetAutoDisableSteps(Body, body_autodisable_frames);
+                
+                // disconnect from world gravity so we can apply buoyancy
+                                d.BodySetGravityMode (Body, false);
+
+                m_interpenetrationcount = 0;
+                m_collisionscore = 0;
+                m_disabled = false;
+
+                // The body doesn't already have a finite rotation mode set here
+                if ((!m_angularlock.ApproxEquals(Vector3.Zero, 0.0f)) && _parent == null)
+                {
+                    createAMotor(m_angularlock);
+                }
+                if (m_vehicle.Type != Vehicle.TYPE_NONE)
+                {
+                    m_vehicle.Enable(Body, _parent_scene);
+                }
+
+                _parent_scene.addActivePrim(this);
+            }
+        }
+
+        #region Mass Calculation
+
+        private float CalculateMass()
+        {
+            float volume = 0;
+
+            // No material is passed to the physics engines yet..  soo..
+            // we're using the m_density constant in the class definition
+
+            float returnMass = 0;
+
+            switch (_pbs.ProfileShape)
+            {
+                case ProfileShape.Square:
+                    // Profile Volume
+
+                    volume = _size.X*_size.Y*_size.Z;
+
+                    // If the user has 'hollowed out'
+                    // ProfileHollow is one of those 0 to 50000 values :P
+                    // we like percentages better..   so turning into a percentage
+
+                    if (((float) _pbs.ProfileHollow/50000f) > 0.0)
+                    {
+                        float hollowAmount = (float) _pbs.ProfileHollow/50000f;
+
+                        // calculate the hollow volume by it's shape compared to the prim shape
+                        float hollowVolume = 0;
+                        switch (_pbs.HollowShape)
+                        {
+                            case HollowShape.Square:
+                            case HollowShape.Same:
+                                // Cube Hollow volume calculation
+                                float hollowsizex = _size.X*hollowAmount;
+                                float hollowsizey = _size.Y*hollowAmount;
+                                float hollowsizez = _size.Z*hollowAmount;
+                                hollowVolume = hollowsizex*hollowsizey*hollowsizez;
+                                break;
+
+                            case HollowShape.Circle:
+                                // Hollow shape is a perfect cyllinder in respect to the cube's scale
+                                // Cyllinder hollow volume calculation
+                                float hRadius = _size.X/2;
+                                float hLength = _size.Z;
+
+                                // pi * r2 * h
+                                hollowVolume = ((float) (Math.PI*Math.Pow(hRadius, 2)*hLength)*hollowAmount);
+                                break;
+
+                            case HollowShape.Triangle:
+                                // Equilateral Triangular Prism volume hollow calculation
+                                // Triangle is an Equilateral Triangular Prism with aLength = to _size.Y
+
+                                float aLength = _size.Y;
+                                // 1/2 abh
+                                hollowVolume = (float) ((0.5*aLength*_size.X*_size.Z)*hollowAmount);
+                                break;
+
+                            default:
+                                hollowVolume = 0;
+                                break;
+                        }
+                        volume = volume - hollowVolume;
+                    }
+
+                    break;
+                case ProfileShape.Circle:
+                    if (_pbs.PathCurve == (byte)Extrusion.Straight)
+                    {
+                        // Cylinder
+                        float volume1 = (float)(Math.PI * Math.Pow(_size.X/2, 2) * _size.Z);
+                        float volume2 = (float)(Math.PI * Math.Pow(_size.Y/2, 2) * _size.Z);
+
+                        // Approximating the cylinder's irregularity.
+                        if (volume1 > volume2)
+                        {
+                            volume = (float)volume1 - (volume1 - volume2);
+                        }
+                        else if (volume2 > volume1)
+                        {
+                            volume = (float)volume2 - (volume2 - volume1);
+                        }
+                        else
+                        {
+                            // Regular cylinder
+                            volume = volume1;
+                        }
+                    }
+                    else
+                    {
+                        // We don't know what the shape is yet, so use default
+                        volume = _size.X * _size.Y * _size.Z;
+                    }
+                    // If the user has 'hollowed out'
+                    // ProfileHollow is one of those 0 to 50000 values :P
+                    // we like percentages better..   so turning into a percentage
+
+                    if (((float)_pbs.ProfileHollow / 50000f) > 0.0)
+                    {
+                        float hollowAmount = (float)_pbs.ProfileHollow / 50000f;
+
+                        // calculate the hollow volume by it's shape compared to the prim shape
+                        float hollowVolume = 0;
+                        switch (_pbs.HollowShape)
+                        {
+                            case HollowShape.Same:
+                            case HollowShape.Circle:
+                                // Hollow shape is a perfect cyllinder in respect to the cube's scale
+                                // Cyllinder hollow volume calculation
+                                float hRadius = _size.X / 2;
+                                float hLength = _size.Z;
+
+                                // pi * r2 * h
+                                hollowVolume = ((float)(Math.PI * Math.Pow(hRadius, 2) * hLength) * hollowAmount);
+                                break;
+
+                            case HollowShape.Square:
+                                // Cube Hollow volume calculation
+                                float hollowsizex = _size.X * hollowAmount;
+                                float hollowsizey = _size.Y * hollowAmount;
+                                float hollowsizez = _size.Z * hollowAmount;
+                                hollowVolume = hollowsizex * hollowsizey * hollowsizez;
+                                break;
+
+                            case HollowShape.Triangle:
+                                // Equilateral Triangular Prism volume hollow calculation
+                                // Triangle is an Equilateral Triangular Prism with aLength = to _size.Y
+
+                                float aLength = _size.Y;
+                                // 1/2 abh
+                                hollowVolume = (float)((0.5 * aLength * _size.X * _size.Z) * hollowAmount);
+                                break;
+
+                            default:
+                                hollowVolume = 0;
+                                break;
+                        }
+                        volume = volume - hollowVolume;
+                    }
+                    break;
+
+                case ProfileShape.HalfCircle:
+                    if (_pbs.PathCurve == (byte)Extrusion.Curve1)
+                    {
+                        if (_size.X == _size.Y && _size.Y == _size.Z)
+                        {
+                            // regular sphere
+                            // v = 4/3 * pi * r^3
+                            float sradius3 = (float)Math.Pow((_size.X / 2), 3);
+                            volume = (float)((4f / 3f) * Math.PI * sradius3);
+                        }
+                        else
+                        {
+                            // we treat this as a box currently
+                            volume = _size.X * _size.Y * _size.Z;
+                        }
+                    }
+                    else
+                    {
+                        // We don't know what the shape is yet, so use default
+                        volume = _size.X * _size.Y * _size.Z;
+                    }
+                    break;
+
+                case ProfileShape.EquilateralTriangle:
+                    /*
+                        v = (abs((xB*yA-xA*yB)+(xC*yB-xB*yC)+(xA*yC-xC*yA))/2) * h
+
+                        // seed mesh
+                        Vertex MM = new Vertex(-0.25f, -0.45f, 0.0f);
+                        Vertex PM = new Vertex(+0.5f, 0f, 0.0f);
+                        Vertex PP = new Vertex(-0.25f, +0.45f, 0.0f);
+                     */
+                    float xA = -0.25f * _size.X;
+                    float yA = -0.45f * _size.Y;
+
+                    float xB = 0.5f * _size.X;
+                    float yB = 0;
+
+                    float xC = -0.25f * _size.X;
+                    float yC = 0.45f * _size.Y;
+
+                    volume = (float)((Math.Abs((xB * yA - xA * yB) + (xC * yB - xB * yC) + (xA * yC - xC * yA)) / 2) * _size.Z);
+
+                    // If the user has 'hollowed out'
+                    // ProfileHollow is one of those 0 to 50000 values :P
+                    // we like percentages better..   so turning into a percentage
+                    float fhollowFactor = ((float)_pbs.ProfileHollow / 1.9f);
+                    if (((float)fhollowFactor / 50000f) > 0.0)
+                    {
+                        float hollowAmount = (float)fhollowFactor / 50000f;
+
+                        // calculate the hollow volume by it's shape compared to the prim shape
+                        float hollowVolume = 0;
+                        switch (_pbs.HollowShape)
+                        {
+                            case HollowShape.Same:
+                            case HollowShape.Triangle:
+                                // Equilateral Triangular Prism volume hollow calculation
+                                // Triangle is an Equilateral Triangular Prism with aLength = to _size.Y
+
+                                float aLength = _size.Y;
+                                // 1/2 abh
+                                hollowVolume = (float)((0.5 * aLength * _size.X * _size.Z) * hollowAmount);
+                                break;
+
+                            case HollowShape.Square:
+                                // Cube Hollow volume calculation
+                                float hollowsizex = _size.X * hollowAmount;
+                                float hollowsizey = _size.Y * hollowAmount;
+                                float hollowsizez = _size.Z * hollowAmount;
+                                hollowVolume = hollowsizex * hollowsizey * hollowsizez;
+                                break;
+
+                            case HollowShape.Circle:
+                                // Hollow shape is a perfect cyllinder in respect to the cube's scale
+                                // Cyllinder hollow volume calculation
+                                float hRadius = _size.X / 2;
+                                float hLength = _size.Z;
+
+                                // pi * r2 * h
+                                hollowVolume = ((float)((Math.PI * Math.Pow(hRadius, 2) * hLength)/2) * hollowAmount);
+                                break;
+
+                            default:
+                                hollowVolume = 0;
+                                break;
+                        }
+                        volume = volume - hollowVolume;
+                    }
+                    break;
+
+                default:
+                    // we don't have all of the volume formulas yet so
+                    // use the common volume formula for all
+                    volume = _size.X*_size.Y*_size.Z;
+                    break;
+            }
+
+            // Calculate Path cut effect on volume
+            // Not exact, in the triangle hollow example
+            // They should never be zero or less then zero..
+            // we'll ignore it if it's less then zero
+
+            // ProfileEnd and ProfileBegin are values
+            // from 0 to 50000
+
+            // Turning them back into percentages so that I can cut that percentage off the volume
+
+            float PathCutEndAmount = _pbs.ProfileEnd;
+            float PathCutStartAmount = _pbs.ProfileBegin;
+            if (((PathCutStartAmount + PathCutEndAmount)/50000f) > 0.0f)
+            {
+                float pathCutAmount = ((PathCutStartAmount + PathCutEndAmount)/50000f);
+
+                // Check the return amount for sanity
+                if (pathCutAmount >= 0.99f)
+                    pathCutAmount = 0.99f;
+
+                volume = volume - (volume*pathCutAmount);
+            }
+            UInt16 taperX = _pbs.PathScaleX;
+            UInt16 taperY = _pbs.PathScaleY;
+            float taperFactorX = 0;
+            float taperFactorY = 0;
+
+            // Mass = density * volume
+            if (taperX != 100)
+            {
+                if (taperX > 100)
+                {
+                    taperFactorX = 1.0f - ((float)taperX / 200);
+                    //m_log.Warn("taperTopFactorX: " + extr.taperTopFactorX.ToString());
+                }
+                else
+                {
+                    taperFactorX = 1.0f - ((100 - (float)taperX) / 100);
+                    //m_log.Warn("taperBotFactorX: " + extr.taperBotFactorX.ToString());
+                }
+                volume = (float)volume * ((taperFactorX / 3f) + 0.001f);
+            }
+
+            if (taperY != 100)
+            {
+                if (taperY > 100)
+                {
+                    taperFactorY = 1.0f - ((float)taperY / 200);
+                    //m_log.Warn("taperTopFactorY: " + extr.taperTopFactorY.ToString());
+                }
+                else
+                {
+                    taperFactorY = 1.0f - ((100 - (float)taperY) / 100);
+                    //m_log.Warn("taperBotFactorY: " + extr.taperBotFactorY.ToString());
+                }
+                volume = (float)volume * ((taperFactorY / 3f) + 0.001f);
+            }
+            returnMass = m_density*volume;
+            if (returnMass <= 0) returnMass = 0.0001f;//ckrinke: Mass must be greater then zero.
+
+
+
+            // Recursively calculate mass
+            bool HasChildPrim = false;
+            lock (childrenPrim)
+            {
+                if (childrenPrim.Count > 0)
+                {
+                    HasChildPrim = true;
+                }
+
+            }
+            if (HasChildPrim)
+            {
+                OdePrim[] childPrimArr = new OdePrim[0];
+
+                lock (childrenPrim)
+                    childPrimArr = childrenPrim.ToArray();
+
+                for (int i = 0; i < childPrimArr.Length; i++)
+                {
+                    if (childPrimArr[i] != null && !childPrimArr[i].m_taintremove)
+                        returnMass += childPrimArr[i].CalculateMass();
+                    // failsafe, this shouldn't happen but with OpenSim, you never know :)
+                    if (i > 256)
+                        break;
+                }
+            }
+            if (returnMass > _parent_scene.maximumMassObject)
+                returnMass = _parent_scene.maximumMassObject;
+            return returnMass;
+        }// end CalculateMass
+
+        #endregion
+
+        public void setMass()
+        {
+            if (Body != (IntPtr) 0)
+            {
+                float newmass = CalculateMass();
+
+                //m_log.Info("[PHYSICS]: New Mass: " + newmass.ToString());
+
+                d.MassSetBoxTotal(out pMass, newmass, _size.X, _size.Y, _size.Z);
+                d.BodySetMass(Body, ref pMass);
+            }
+        }
+
+        public void disableBody()
+        {
+            //this kills the body so things like 'mesh' can re-create it.
+            lock (this)
+            {
+                if (!childPrim)
+                {
+                    if (Body != IntPtr.Zero)
+                    {
+                        _parent_scene.remActivePrim(this);
+                        m_collisionCategories &= ~CollisionCategories.Body;
+                        m_collisionFlags &= ~(CollisionCategories.Wind | CollisionCategories.Land);
+
+                        if (prim_geom != IntPtr.Zero)
+                        {
+                            d.GeomSetCategoryBits(prim_geom, (int)m_collisionCategories);
+                            d.GeomSetCollideBits(prim_geom, (int)m_collisionFlags);
+                        }
+
+                        
+                        d.BodyDestroy(Body);
+                        lock (childrenPrim)
+                        {
+                            if (childrenPrim.Count > 0)
+                            {
+                                foreach (OdePrim prm in childrenPrim)
+                                {
+                                    _parent_scene.remActivePrim(prm);
+                                    prm.Body = IntPtr.Zero;
+                                }
+                            }
+                        }
+                        Body = IntPtr.Zero;
+                    }
+                }
+                else
+                {
+                    _parent_scene.remActivePrim(this);
+                    
+                    m_collisionCategories &= ~CollisionCategories.Body;
+                    m_collisionFlags &= ~(CollisionCategories.Wind | CollisionCategories.Land);
+
+                    if (prim_geom != IntPtr.Zero)
+                    {
+                        d.GeomSetCategoryBits(prim_geom, (int)m_collisionCategories);
+                        d.GeomSetCollideBits(prim_geom, (int)m_collisionFlags);
+                    }
+
+                    
+                    Body = IntPtr.Zero;
+                }
+            }
+            m_disabled = true;
+            m_collisionscore = 0;
+        }
+
+        private static Dictionary<IMesh, IntPtr> m_MeshToTriMeshMap = new Dictionary<IMesh, IntPtr>();
+
+        public void setMesh(OdeScene parent_scene, IMesh mesh)
+        {
+            // This sleeper is there to moderate how long it takes between
+            // setting up the mesh and pre-processing it when we get rapid fire mesh requests on a single object
+
+            //Thread.Sleep(10);
+
+            //Kill Body so that mesh can re-make the geom
+            if (IsPhysical && Body != IntPtr.Zero)
+            {
+                if (childPrim)
+                {
+                    if (_parent != null)
+                    {
+                        OdePrim parent = (OdePrim)_parent;
+                        parent.ChildDelink(this);
+                    }
+                }
+                else
+                {
+                    disableBody();
+                }
+            }
+
+            IntPtr vertices, indices;
+            int vertexCount, indexCount;
+            int vertexStride, triStride;
+            mesh.getVertexListAsPtrToFloatArray(out vertices, out vertexStride, out vertexCount); // Note, that vertices are fixed in unmanaged heap
+            mesh.getIndexListAsPtrToIntArray(out indices, out triStride, out indexCount); // Also fixed, needs release after usage
+
+            mesh.releaseSourceMeshData(); // free up the original mesh data to save memory
+            if (m_MeshToTriMeshMap.ContainsKey(mesh))
+            {
+                _triMeshData = m_MeshToTriMeshMap[mesh];
+            }
+            else
+            {
+                _triMeshData = d.GeomTriMeshDataCreate();
+
+                d.GeomTriMeshDataBuildSimple(_triMeshData, vertices, vertexStride, vertexCount, indices, indexCount, triStride);
+                d.GeomTriMeshDataPreprocess(_triMeshData);
+                m_MeshToTriMeshMap[mesh] = _triMeshData;
+            }
+
+            _parent_scene.waitForSpaceUnlock(m_targetSpace);
+            try
+            {
+                if (prim_geom == IntPtr.Zero)
+                {
+                    SetGeom(d.CreateTriMesh(m_targetSpace, _triMeshData, parent_scene.triCallback, null, null));
+                }
+            }
+            catch (AccessViolationException)
+            {
+                m_log.Error("[PHYSICS]: MESH LOCKED");
+                return;
+            }
+
+
+           // if (IsPhysical && Body == (IntPtr) 0)
+           // {
+                // Recreate the body
+          //     m_interpenetrationcount = 0;
+           //     m_collisionscore = 0;
+
+           //     enableBody();
+           // }
+        }
+
+        public void ProcessTaints(float timestep)
+        {
+//Console.WriteLine("ProcessTaints for " + m_primName );
+            if (m_taintadd)
+            {
+                changeadd(timestep);
+            }
+            
+            if (prim_geom != IntPtr.Zero)
+            {
+                         if (!_position.ApproxEquals(m_taintposition, 0f))
+                            changemove(timestep);
+
+                     if (m_taintrot != _orientation)
+                     {
+                        if(childPrim && IsPhysical)     // For physical child prim...
+                        {
+                            rotate(timestep);       
+                            // KF: ODE will also rotate the parent prim!
+                            // so rotate the root back to where it was
+                            OdePrim parent = (OdePrim)_parent;
+                            parent.rotate(timestep);
+                    }
+                    else
+                    {
+                            //Just rotate the prim
+                            rotate(timestep);
+                    }  
+                }
+                //
+            
+                if (m_taintPhysics != m_isphysical && !(m_taintparent != _parent))
+                    changePhysicsStatus(timestep);
+                //
+
+                if (!_size.ApproxEquals(m_taintsize,0f))
+                    changesize(timestep);
+                //
+
+                if (m_taintshape)
+                    changeshape(timestep);
+                //
+
+                if (m_taintforce)
+                    changeAddForce(timestep);
+
+                if (m_taintaddangularforce)
+                    changeAddAngularForce(timestep);
+
+                if (!m_taintTorque.ApproxEquals(Vector3.Zero, 0.001f))
+                    changeSetTorque(timestep);
+
+                if (m_taintdisable)
+                    changedisable(timestep);
+
+                if (m_taintselected != m_isSelected)
+                    changeSelectedStatus(timestep);
+
+                if (!m_taintVelocity.ApproxEquals(Vector3.Zero, 0.001f))
+                    changevelocity(timestep);
+
+                if (m_taintparent != _parent)
+                    changelink(timestep);
+
+                if (m_taintCollidesWater != m_collidesWater)
+                    changefloatonwater(timestep);
+
+                if (!m_angularlock.ApproxEquals(m_taintAngularLock,0f))
+                    changeAngularLock(timestep);
+ 
+            }
+            else
+            {
+                m_log.Error("[PHYSICS]: The scene reused a disposed PhysActor! *waves finger*, Don't be evil.  A couple of things can cause this.   An improper prim breakdown(be sure to set prim_geom to zero after d.GeomDestroy!   An improper buildup (creating the geom failed).   Or, the Scene Reused a physics actor after disposing it.)");
+            }
+        }
+
+
+        private void changeAngularLock(float timestep)
+        {
+            // do we have a Physical object?
+            if (Body != IntPtr.Zero)
+            {
+                //Check that we have a Parent
+                //If we have a parent then we're not authorative here
+                if (_parent == null)
+                {
+                    if (!m_taintAngularLock.ApproxEquals(Vector3.One, 0f))
+                    {
+                        //d.BodySetFiniteRotationMode(Body, 0);
+                        //d.BodySetFiniteRotationAxis(Body,m_taintAngularLock.X,m_taintAngularLock.Y,m_taintAngularLock.Z);
+                        createAMotor(m_taintAngularLock);
+                    }
+                    else
+                    {
+                        if (Amotor != IntPtr.Zero)
+                        {
+                            d.JointDestroy(Amotor);
+                            Amotor = IntPtr.Zero;
+                        }
+                    }
+                }
+            }
+            // Store this for later in case we get turned into a separate body
+            m_angularlock = m_taintAngularLock;
+            
+        }
+
+        private void changelink(float timestep)
+        {
+            // If the newly set parent is not null
+            // create link
+            if (_parent == null && m_taintparent != null)
+            {
+                if (m_taintparent.PhysicsActorType == (int)ActorTypes.Prim)
+                {
+                    OdePrim obj = (OdePrim)m_taintparent;
+                    //obj.disableBody();
+//Console.WriteLine("changelink calls ParentPrim");
+                    obj.ParentPrim(this);
+
+                    /*
+                    if (obj.Body != (IntPtr)0 && Body != (IntPtr)0 && obj.Body != Body)
+                    {
+                        _linkJointGroup = d.JointGroupCreate(0);
+                        m_linkJoint = d.JointCreateFixed(_parent_scene.world, _linkJointGroup);
+                        d.JointAttach(m_linkJoint, obj.Body, Body);
+                        d.JointSetFixed(m_linkJoint);
+                    }
+                     */
+                }
+            }
+            // If the newly set parent is null
+            // destroy link
+            else if (_parent != null && m_taintparent == null)
+            {
+//Console.WriteLine("  changelink B");        
+            
+                if (_parent is OdePrim)
+                {
+                    OdePrim obj = (OdePrim)_parent;
+                    obj.ChildDelink(this);
+                    childPrim = false;
+                    //_parent = null;
+                }
+                
+                /*
+                    if (Body != (IntPtr)0 && _linkJointGroup != (IntPtr)0)
+                    d.JointGroupDestroy(_linkJointGroup);
+                        
+                    _linkJointGroup = (IntPtr)0;
+                    m_linkJoint = (IntPtr)0;
+                */
+            }
+ 
+            _parent = m_taintparent;
+            m_taintPhysics = m_isphysical;
+        }
+
+        // I'm the parent
+        // prim is the child
+        public void ParentPrim(OdePrim prim)
+        {
+//Console.WriteLine("ParentPrim  " + m_primName);        
+            if (this.m_localID != prim.m_localID)
+            {
+                if (Body == IntPtr.Zero)
+                {
+                    Body = d.BodyCreate(_parent_scene.world);
+                    setMass();
+                }
+                if (Body != IntPtr.Zero)
+                {
+                    lock (childrenPrim)
+                    {
+                        if (!childrenPrim.Contains(prim))
+                        {
+//Console.WriteLine("childrenPrim.Add " + prim);                          
+                            childrenPrim.Add(prim);
+                            
+                            foreach (OdePrim prm in childrenPrim)
+                            {
+                                d.Mass m2;
+                                d.MassSetZero(out m2);
+                                d.MassSetBoxTotal(out m2, prim.CalculateMass(), prm._size.X, prm._size.Y, prm._size.Z);
+
+
+                                d.Quaternion quat = new d.Quaternion();
+                                quat.W = prm._orientation.W;
+                                quat.X = prm._orientation.X;
+                                quat.Y = prm._orientation.Y;
+                                quat.Z = prm._orientation.Z;
+
+                                d.Matrix3 mat = new d.Matrix3();
+                                d.RfromQ(out mat, ref quat);
+                                d.MassRotate(ref m2, ref mat);
+                                d.MassTranslate(ref m2, Position.X - prm.Position.X, Position.Y - prm.Position.Y, Position.Z - prm.Position.Z);
+                                d.MassAdd(ref pMass, ref m2);
+                            }
+                            foreach (OdePrim prm in childrenPrim)
+                            {
+                       
+                                prm.m_collisionCategories |= CollisionCategories.Body;
+                                prm.m_collisionFlags |= (CollisionCategories.Land | CollisionCategories.Wind);
+
+                                if (prm.prim_geom == IntPtr.Zero)
+                                {
+                                    m_log.Warn("[PHYSICS]: Unable to link one of the linkset elements.  No geom yet");
+                                    continue;
+                                }
+//Console.WriteLine(" GeomSetCategoryBits 1: " + prm.prim_geom + " - " + (int)prm.m_collisionCategories + " for " + m_primName);    
+                                d.GeomSetCategoryBits(prm.prim_geom, (int)prm.m_collisionCategories);
+                                d.GeomSetCollideBits(prm.prim_geom, (int)prm.m_collisionFlags);
+
+
+                                d.Quaternion quat = new d.Quaternion();
+                                quat.W = prm._orientation.W;
+                                quat.X = prm._orientation.X;
+                                quat.Y = prm._orientation.Y;
+                                quat.Z = prm._orientation.Z;
+
+                                d.Matrix3 mat = new d.Matrix3();
+                                d.RfromQ(out mat, ref quat);
+                                if (Body != IntPtr.Zero)
+                                {
+                                    d.GeomSetBody(prm.prim_geom, Body);
+                                    prm.childPrim = true;
+                                    d.GeomSetOffsetWorldPosition(prm.prim_geom, prm.Position.X , prm.Position.Y, prm.Position.Z);
+                                    //d.GeomSetOffsetPosition(prim.prim_geom,
+                                    //    (Position.X - prm.Position.X) - pMass.c.X,
+                                    //    (Position.Y - prm.Position.Y) - pMass.c.Y,
+                                    //    (Position.Z - prm.Position.Z) - pMass.c.Z);
+                                    d.GeomSetOffsetWorldRotation(prm.prim_geom, ref mat);
+                                    //d.GeomSetOffsetRotation(prm.prim_geom, ref mat);
+                                    d.MassTranslate(ref pMass, -pMass.c.X, -pMass.c.Y, -pMass.c.Z);
+                                    d.BodySetMass(Body, ref pMass);
+                                }
+                                else
+                                {
+                                    m_log.Debug("[PHYSICS]:I ain't got no boooooooooddy, no body");
+                                }
+
+
+                                prm.m_interpenetrationcount = 0;
+                                prm.m_collisionscore = 0;
+                                prm.m_disabled = false;
+
+                                // The body doesn't already have a finite rotation mode set here
+                                if ((!m_angularlock.ApproxEquals(Vector3.Zero, 0f)) && _parent == null)
+                                {
+                                    prm.createAMotor(m_angularlock);
+                                }
+                                prm.Body = Body;
+                                _parent_scene.addActivePrim(prm);
+                            }
+                            m_collisionCategories |= CollisionCategories.Body;
+                            m_collisionFlags |= (CollisionCategories.Land | CollisionCategories.Wind);
+
+//Console.WriteLine("GeomSetCategoryBits 2: " + prim_geom + " - " + (int)m_collisionCategories + " for " + m_primName);  
+                            d.GeomSetCategoryBits(prim_geom, (int)m_collisionCategories);
+//Console.WriteLine(" Post GeomSetCategoryBits 2");
+                            d.GeomSetCollideBits(prim_geom, (int)m_collisionFlags);
+
+
+                            d.Quaternion quat2 = new d.Quaternion();
+                            quat2.W = _orientation.W;
+                            quat2.X = _orientation.X;
+                            quat2.Y = _orientation.Y;
+                            quat2.Z = _orientation.Z;
+
+                            d.Matrix3 mat2 = new d.Matrix3();
+                            d.RfromQ(out mat2, ref quat2);
+                            d.GeomSetBody(prim_geom, Body);
+                            d.GeomSetOffsetWorldPosition(prim_geom, Position.X - pMass.c.X, Position.Y - pMass.c.Y, Position.Z - pMass.c.Z);
+                            //d.GeomSetOffsetPosition(prim.prim_geom,
+                            //    (Position.X - prm.Position.X) - pMass.c.X,
+                            //    (Position.Y - prm.Position.Y) - pMass.c.Y,
+                            //    (Position.Z - prm.Position.Z) - pMass.c.Z);
+                            //d.GeomSetOffsetRotation(prim_geom, ref mat2);
+                            d.MassTranslate(ref pMass, -pMass.c.X, -pMass.c.Y, -pMass.c.Z);
+                            d.BodySetMass(Body, ref pMass);
+
+                            d.BodySetAutoDisableFlag(Body, true);
+                            d.BodySetAutoDisableSteps(Body, body_autodisable_frames);
+
+
+                            m_interpenetrationcount = 0;
+                            m_collisionscore = 0;
+                            m_disabled = false;
+
+                            // The body doesn't already have a finite rotation mode set here
+                            if ((!m_angularlock.ApproxEquals(Vector3.Zero, 0f)) && _parent == null)
+                            {
+                                createAMotor(m_angularlock);
+                            }
+                            d.BodySetPosition(Body, Position.X, Position.Y, Position.Z);
+                            if (m_vehicle.Type != Vehicle.TYPE_NONE) m_vehicle.Enable(Body, _parent_scene);
+                            _parent_scene.addActivePrim(this);
+                        }
+                    }
+                }
+            }
+
+        }
+
+        private void ChildSetGeom(OdePrim odePrim)
+        {
+            //if (m_isphysical && Body != IntPtr.Zero)
+            lock (childrenPrim)
+            {
+                foreach (OdePrim prm in childrenPrim)
+                {
+                    //prm.childPrim = true;
+                    prm.disableBody();
+                    //prm.m_taintparent = null;
+                    //prm._parent = null;
+                    //prm.m_taintPhysics = false;
+                    //prm.m_disabled = true;
+                    //prm.childPrim = false;
+                }
+            }
+            disableBody();
+
+
+            if (Body != IntPtr.Zero)
+            {
+                _parent_scene.remActivePrim(this);
+            }
+
+            lock (childrenPrim)
+            {
+                foreach (OdePrim prm in childrenPrim)
+                {
+//Console.WriteLine("ChildSetGeom calls ParentPrim");               
+                    ParentPrim(prm);
+                }
+            }
+            
+        }
+
+        private void ChildDelink(OdePrim odePrim)
+        {
+            // Okay, we have a delinked child..   need to rebuild the body.
+            lock (childrenPrim)
+            {
+                foreach (OdePrim prm in childrenPrim)
+                {
+                    prm.childPrim = true;
+                    prm.disableBody();
+                    //prm.m_taintparent = null;
+                    //prm._parent = null;
+                    //prm.m_taintPhysics = false;
+                    //prm.m_disabled = true;
+                    //prm.childPrim = false;
+                }
+            }
+            disableBody();
+
+            lock (childrenPrim)
+            {
+ //Console.WriteLine("childrenPrim.Remove " + odePrim);          
+                childrenPrim.Remove(odePrim);
+            }
+            
+            
+            
+
+            if (Body != IntPtr.Zero)
+            {
+                _parent_scene.remActivePrim(this);
+            }
+
+            
+
+            lock (childrenPrim)
+            {
+                foreach (OdePrim prm in childrenPrim)
+                {
+//Console.WriteLine("ChildDelink calls ParentPrim");                
+                    ParentPrim(prm);
+                }
+            }
+
+           
+        }
+
+        private void changeSelectedStatus(float timestep)
+        {
+            if (m_taintselected)
+            {
+                m_collisionCategories = CollisionCategories.Selected;
+                m_collisionFlags = (CollisionCategories.Sensor | CollisionCategories.Space);
+
+                // We do the body disable soft twice because 'in theory' a collision could have happened
+                // in between the disabling and the collision properties setting
+                // which would wake the physical body up from a soft disabling and potentially cause it to fall
+                // through the ground.
+                
+                // NOTE FOR JOINTS: this doesn't always work for jointed assemblies because if you select
+                // just one part of the assembly, the rest of the assembly is non-selected and still simulating,
+                // so that causes the selected part to wake up and continue moving.
+
+                // even if you select all parts of a jointed assembly, it is not guaranteed that the entire
+                // assembly will stop simulating during the selection, because of the lack of atomicity
+                // of select operations (their processing could be interrupted by a thread switch, causing
+                // simulation to continue before all of the selected object notifications trickle down to
+                // the physics engine).
+
+                // e.g. we select 100 prims that are connected by joints. non-atomically, the first 50 are
+                // selected and disabled. then, due to a thread switch, the selection processing is
+                // interrupted and the physics engine continues to simulate, so the last 50 items, whose
+                // selection was not yet processed, continues to simulate. this wakes up ALL of the 
+                // first 50 again. then the last 50 are disabled. then the first 50, which were just woken
+                // up, start simulating again, which in turn wakes up the last 50.
+
+                if (m_isphysical)
+                {
+                    disableBodySoft();
+                }
+
+                if (prim_geom != IntPtr.Zero)
+                {
+                    d.GeomSetCategoryBits(prim_geom, (int)m_collisionCategories);
+                    d.GeomSetCollideBits(prim_geom, (int)m_collisionFlags);
+                }
+
+                if (m_isphysical)
+                {
+                    disableBodySoft();
+                }
+            }
+            else
+            {
+                m_collisionCategories = CollisionCategories.Geom;
+
+                if (m_isphysical)
+                    m_collisionCategories |= CollisionCategories.Body;
+
+                m_collisionFlags = m_default_collisionFlags;
+
+                if (m_collidesLand)
+                    m_collisionFlags |= CollisionCategories.Land;
+                if (m_collidesWater)
+                    m_collisionFlags |= CollisionCategories.Water;
+
+                if (prim_geom != IntPtr.Zero)
+                {
+                    d.GeomSetCategoryBits(prim_geom, (int)m_collisionCategories);
+                    d.GeomSetCollideBits(prim_geom, (int)m_collisionFlags);
+                }
+                if (m_isphysical)
+                {
+                    if (Body != IntPtr.Zero)
+                    {
+                        d.BodySetLinearVel(Body, 0f, 0f, 0f);
+                        d.BodySetForce(Body, 0, 0, 0);
+                        enableBodySoft();
+                    }
+                }
+            }
+
+            resetCollisionAccounting();
+            m_isSelected = m_taintselected;
+        }//end changeSelectedStatus
+
+        public void ResetTaints()
+        {
+            m_taintposition = _position;
+            m_taintrot = _orientation;
+            m_taintPhysics = m_isphysical;
+            m_taintselected = m_isSelected;
+            m_taintsize = _size;
+            m_taintshape = false;
+            m_taintforce = false;
+            m_taintdisable = false;
+            m_taintVelocity = Vector3.Zero;
+        }
+
+        public void CreateGeom(IntPtr m_targetSpace, IMesh _mesh)
+        {
+//Console.WriteLine("CreateGeom:");         
+            if (_mesh != null)
+            {
+                setMesh(_parent_scene, _mesh);
+            }
+            else
+            {
+                if (_pbs.ProfileShape == ProfileShape.HalfCircle && _pbs.PathCurve == (byte)Extrusion.Curve1)
+                {
+                    if (_size.X == _size.Y && _size.Y == _size.Z && _size.X == _size.Z)
+                    {
+                        if (((_size.X / 2f) > 0f))
+                        {
+                            _parent_scene.waitForSpaceUnlock(m_targetSpace);
+                            try
+                            {
+//Console.WriteLine(" CreateGeom 1");
+                                SetGeom(d.CreateSphere(m_targetSpace, _size.X / 2));
+                            }
+                            catch (AccessViolationException)
+                            {
+                                m_log.Warn("[PHYSICS]: Unable to create physics proxy for object");
+                                ode.dunlock(_parent_scene.world);
+                                return;
+                            }
+                        }
+                        else
+                        {
+                            _parent_scene.waitForSpaceUnlock(m_targetSpace);
+                            try
+                            {
+//Console.WriteLine(" CreateGeom 2");                           
+                                SetGeom(d.CreateBox(m_targetSpace, _size.X, _size.Y, _size.Z));
+                            }
+                            catch (AccessViolationException)
+                            {
+                                m_log.Warn("[PHYSICS]: Unable to create physics proxy for object");
+                                ode.dunlock(_parent_scene.world);
+                                return;
+                            }
+                        }
+                    }
+                    else
+                    {
+                        _parent_scene.waitForSpaceUnlock(m_targetSpace);
+                        try
+                        {
+//Console.WriteLine("  CreateGeom 3");                       
+                            SetGeom(d.CreateBox(m_targetSpace, _size.X, _size.Y, _size.Z));
+                        }
+                        catch (AccessViolationException)
+                        {
+                            m_log.Warn("[PHYSICS]: Unable to create physics proxy for object");
+                            ode.dunlock(_parent_scene.world);
+                            return;
+                        }
+                    }
+                }
+
+                else
+                {
+                    _parent_scene.waitForSpaceUnlock(m_targetSpace);
+                    try
+                    {
+//Console.WriteLine("  CreateGeom 4");                  
+                        SetGeom(d.CreateBox(m_targetSpace, _size.X, _size.Y, _size.Z));
+                    }
+                    catch (AccessViolationException)
+                    {
+                        m_log.Warn("[PHYSICS]: Unable to create physics proxy for object");
+                        ode.dunlock(_parent_scene.world);
+                        return;
+                    }
+                }
+            }
+        }
+
+        public void changeadd(float timestep)
+        {
+            int[] iprimspaceArrItem = _parent_scene.calculateSpaceArrayItemFromPos(_position);
+            IntPtr targetspace = _parent_scene.calculateSpaceForGeom(_position);
+
+            if (targetspace == IntPtr.Zero)
+                targetspace = _parent_scene.createprimspace(iprimspaceArrItem[0], iprimspaceArrItem[1]);
+
+            m_targetSpace = targetspace;
+
+            if (_mesh == null)
+            {
+                if (_parent_scene.needsMeshing(_pbs))
+                {
+                    // Don't need to re-enable body..   it's done in SetMesh
+                    _mesh = _parent_scene.mesher.CreateMesh(m_primName, _pbs, _size, _parent_scene.meshSculptLOD, IsPhysical);
+                    // createmesh returns null when it's a shape that isn't a cube.
+                   // m_log.Debug(m_localID);
+                }
+            }
+
+
+            lock (_parent_scene.OdeLock)
+            {
+//Console.WriteLine("changeadd 1");           
+                CreateGeom(m_targetSpace, _mesh);
+
+                if (prim_geom != IntPtr.Zero)
+                {
+                    d.GeomSetPosition(prim_geom, _position.X, _position.Y, _position.Z);
+                    d.Quaternion myrot = new d.Quaternion();
+                    myrot.X = _orientation.X;
+                    myrot.Y = _orientation.Y;
+                    myrot.Z = _orientation.Z;
+                    myrot.W = _orientation.W;
+                    d.GeomSetQuaternion(prim_geom, ref myrot);
+                }
+
+                if (m_isphysical && Body == IntPtr.Zero)
+                {
+                    enableBody();
+                }
+            }
+
+            _parent_scene.geom_name_map[prim_geom] = this.m_primName;
+            _parent_scene.actor_name_map[prim_geom] = (PhysicsActor)this;
+
+            changeSelectedStatus(timestep);
+
+            m_taintadd = false;
+        }
+
+        public void changemove(float timestep)
+        {
+            if (m_isphysical)
+            {
+                
+                if (!m_disabled && !m_taintremove && !childPrim)
+                {
+                    if (Body == IntPtr.Zero)
+                        enableBody();
+                    //Prim auto disable after 20 frames,
+                    //if you move it, re-enable the prim manually.
+                    if (_parent != null)
+                    {
+                        if (m_linkJoint != IntPtr.Zero)
+                        {
+                            d.JointDestroy(m_linkJoint);
+                            m_linkJoint = IntPtr.Zero;
+                        }
+                    }
+                    if (Body != IntPtr.Zero)
+                    {
+                        d.BodySetPosition(Body, _position.X, _position.Y, _position.Z);
+
+                        if (_parent != null)
+                        {
+                            OdePrim odParent = (OdePrim)_parent;
+                            if (Body != (IntPtr)0 && odParent.Body != (IntPtr)0 && Body != odParent.Body)
+                            {
+// KF: Fixed Joints were removed? Anyway - this Console.WriteLine does not show up, so routine is not used??
+Console.WriteLine(" JointCreateFixed");                           
+                                m_linkJoint = d.JointCreateFixed(_parent_scene.world, _linkJointGroup);
+                                d.JointAttach(m_linkJoint, Body, odParent.Body);
+                                d.JointSetFixed(m_linkJoint);
+                            }
+                        }
+                        d.BodyEnable(Body);
+                        if (m_vehicle.Type != Vehicle.TYPE_NONE)
+                        {
+                            m_vehicle.Enable(Body, _parent_scene);
+                        }
+                    }
+                    else
+                    {
+                        m_log.Warn("[PHYSICS]: Body Still null after enableBody().  This is a crash scenario.");
+                    }
+                }
+                //else
+               // {
+                    //m_log.Debug("[BUG]: race!");
+                //}
+            }
+            else
+            {
+                // string primScenAvatarIn = _parent_scene.whichspaceamIin(_position);
+                // int[] arrayitem = _parent_scene.calculateSpaceArrayItemFromPos(_position);
+                _parent_scene.waitForSpaceUnlock(m_targetSpace);
+
+                IntPtr tempspace = _parent_scene.recalculateSpaceForGeom(prim_geom, _position, m_targetSpace);
+                m_targetSpace = tempspace;
+
+                _parent_scene.waitForSpaceUnlock(m_targetSpace);
+                if (prim_geom != IntPtr.Zero)
+                {
+                    d.GeomSetPosition(prim_geom, _position.X, _position.Y, _position.Z);
+
+                    _parent_scene.waitForSpaceUnlock(m_targetSpace);
+                    d.SpaceAdd(m_targetSpace, prim_geom);
+                }
+            }
+
+            changeSelectedStatus(timestep);
+
+            resetCollisionAccounting();
+            m_taintposition = _position;
+        }
+
+        public void Move(float timestep)
+        {
+            float fx = 0;
+            float fy = 0;
+            float fz = 0;
+
+            frcount++;                                  // used to limit debug comment output
+            if (frcount > 100)
+                frcount = 0;
+                
+            if (IsPhysical && (Body != IntPtr.Zero) && !m_isSelected && !childPrim)             // KF: Only move root prims.
+            {
+//if(frcount == 0) Console.WriteLine("Move " +  m_primName + "  VTyp " + m_vehicle.Type +
+                        //                      "    usePID=" + m_usePID  + "    seHover=" + m_useHoverPID  + "  useAPID=" + m_useAPID);                
+                if (m_vehicle.Type != Vehicle.TYPE_NONE)
+                {
+                        // 'VEHICLES' are dealt with in ODEDynamics.cs
+                        m_vehicle.Step(timestep, _parent_scene);
+                }
+                else
+                {
+                        if(!d.BodyIsEnabled (Body))  d.BodyEnable (Body); // KF add 161009
+                        // NON-'VEHICLES' are dealt with here
+                        if (d.BodyIsEnabled(Body) && !m_angularlock.ApproxEquals(Vector3.Zero, 0.003f))
+                        {
+                            d.Vector3 avel2 = d.BodyGetAngularVel(Body);
+                            if (m_angularlock.X == 1)
+                                avel2.X = 0;
+                            if (m_angularlock.Y == 1)
+                                avel2.Y = 0;
+                            if (m_angularlock.Z == 1)
+                                avel2.Z = 0;
+                            d.BodySetAngularVel(Body, avel2.X, avel2.Y, avel2.Z);
+                        }
+                        //float PID_P = 900.0f;
+
+                        float m_mass = CalculateMass();
+
+//                      fz = 0f;
+                    //m_log.Info(m_collisionFlags.ToString());
+
+                        
+                        //KF: m_buoyancy is set by llSetBuoyancy() and is for non-vehicle.
+                        // m_buoyancy: (unlimited value) <0=Falls fast; 0=1g; 1=0g; >1 = floats up 
+                        // NB Prims in ODE are no subject to global gravity
+                        fz = _parent_scene.gravityz * (1.0f - m_buoyancy) * m_mass; // force = acceleration * mass
+
+                        if (m_usePID)
+                        {
+//if(frcount == 0) Console.WriteLine("PID " +  m_primName);             
+                        // KF - this is for object MoveToTarget.
+                        
+                            //if (!d.BodyIsEnabled(Body))
+                            //d.BodySetForce(Body, 0f, 0f, 0f);
+
+                            //  no lock; for now it's only called from within Simulate()
+        
+                            // If the PID Controller isn't active then we set our force
+                            // calculating base velocity to the current position
+
+                            if ((m_PIDTau < 1) && (m_PIDTau != 0))
+                            {
+                                //PID_G = PID_G / m_PIDTau;
+                                m_PIDTau = 1;
+                            }
+        
+                            if ((PID_G - m_PIDTau) <= 0)
+                            {
+                                PID_G = m_PIDTau + 1;
+                            }
+                            //PidStatus = true;
+
+                            // PhysicsVector vec = new PhysicsVector();
+                            d.Vector3 vel = d.BodyGetLinearVel(Body);
+
+                            d.Vector3 pos = d.BodyGetPosition(Body);
+                            _target_velocity =
+                            new Vector3(
+                                    (m_PIDTarget.X - pos.X) * ((PID_G - m_PIDTau) * timestep),
+                                    (m_PIDTarget.Y - pos.Y) * ((PID_G - m_PIDTau) * timestep),
+                                    (m_PIDTarget.Z - pos.Z) * ((PID_G - m_PIDTau) * timestep)
+                                    );
+
+                            //  if velocity is zero, use position control; otherwise, velocity control
+
+                            if (_target_velocity.ApproxEquals(Vector3.Zero,0.1f))
+                            {
+                                //  keep track of where we stopped.  No more slippin' & slidin'
+        
+                                // We only want to deactivate the PID Controller if we think we want to have our surrogate
+                                // react to the physics scene by moving it's position.
+                                // Avatar to Avatar collisions
+                                // Prim to avatar collisions
+
+                                //fx = (_target_velocity.X - vel.X) * (PID_D) + (_zeroPosition.X - pos.X) * (PID_P * 2);
+                                //fy = (_target_velocity.Y - vel.Y) * (PID_D) + (_zeroPosition.Y - pos.Y) * (PID_P * 2);
+                                //fz = fz + (_target_velocity.Z - vel.Z) * (PID_D) + (_zeroPosition.Z - pos.Z) * PID_P;
+                                d.BodySetPosition(Body, m_PIDTarget.X, m_PIDTarget.Y, m_PIDTarget.Z);
+                                d.BodySetLinearVel(Body, 0, 0, 0);
+                                d.BodyAddForce(Body, 0, 0, fz);
+                                return;
+                            }
+                            else
+                            {
+                                _zeroFlag = false;
+
+                                // We're flying and colliding with something
+                                fx = ((_target_velocity.X) - vel.X) * (PID_D);
+                                fy = ((_target_velocity.Y) - vel.Y) * (PID_D);
+        
+                                // vec.Z = (_target_velocity.Z - vel.Z) * PID_D + (_zeroPosition.Z - pos.Z) * PID_P;
+
+                                fz = fz + ((_target_velocity.Z - vel.Z) * (PID_D) * m_mass);
+                            }
+                        }               // end if (m_usePID)
+
+                        // Hover PID Controller needs to be mutually exlusive to MoveTo PID controller
+                        if (m_useHoverPID && !m_usePID)
+                        {
+//Console.WriteLine("Hover " +  m_primName);            
+                        
+                            // If we're using the PID controller, then we have no gravity
+                            fz = (-1 * _parent_scene.gravityz) * m_mass;
+
+                            //  no lock; for now it's only called from within Simulate()
+
+                            // If the PID Controller isn't active then we set our force
+                            // calculating base velocity to the current position
+
+                            if ((m_PIDTau < 1))
+                            {
+                                PID_G = PID_G / m_PIDTau;
+                            }
+
+                            if ((PID_G - m_PIDTau) <= 0)
+                            {
+                                PID_G = m_PIDTau + 1;
+                            }
+                    
+
+                            // Where are we, and where are we headed?
+                            d.Vector3 pos = d.BodyGetPosition(Body);
+                            d.Vector3 vel = d.BodyGetLinearVel(Body);
+
+
+                                                //    Non-Vehicles have a limited set of Hover options.
+                            // determine what our target height really is based on HoverType
+                            switch (m_PIDHoverType)
+                            {
+                                case PIDHoverType.Ground:
+                                    m_groundHeight = _parent_scene.GetTerrainHeightAtXY(pos.X, pos.Y);
+                                    m_targetHoverHeight = m_groundHeight + m_PIDHoverHeight;
+                                    break;
+                                case PIDHoverType.GroundAndWater:
+                                    m_groundHeight = _parent_scene.GetTerrainHeightAtXY(pos.X, pos.Y);
+                                    m_waterHeight  = _parent_scene.GetWaterLevel();
+                                    if (m_groundHeight > m_waterHeight)
+                                    {
+                                        m_targetHoverHeight = m_groundHeight + m_PIDHoverHeight;
+                                    }
+                                    else
+                                    {
+                                        m_targetHoverHeight = m_waterHeight + m_PIDHoverHeight;
+                                    }
+                                    break;
+
+                            }   // end switch (m_PIDHoverType)
+
+
+                            _target_velocity =
+                            new Vector3(0.0f, 0.0f,
+                                (m_targetHoverHeight - pos.Z) * ((PID_G - m_PIDHoverTau) * timestep)
+                                );
+
+                        //  if velocity is zero, use position control; otherwise, velocity control
+
+                        if (_target_velocity.ApproxEquals(Vector3.Zero, 0.1f))
+                        {
+                            //  keep track of where we stopped.  No more slippin' & slidin'
+        
+                            // We only want to deactivate the PID Controller if we think we want to have our surrogate
+                            // react to the physics scene by moving it's position.
+                            // Avatar to Avatar collisions
+                            // Prim to avatar collisions
+
+                            d.BodySetPosition(Body, pos.X, pos.Y, m_targetHoverHeight);
+                            d.BodySetLinearVel(Body, vel.X, vel.Y, 0);
+                            d.BodyAddForce(Body, 0, 0, fz);
+                    //KF this prevents furthur motions        return;
+                        }
+                        else
+                        {
+                            _zeroFlag = false;
+
+                            // We're flying and colliding with something
+                            fz = fz + ((_target_velocity.Z - vel.Z) * (PID_D) * m_mass);
+                        }
+                    } // end m_useHoverPID && !m_usePID
+                    
+                        if (m_useAPID)
+                        {
+                                // RotLookAt, apparently overrides all other rotation sources. Inputs:
+                                // Quaternion m_APIDTarget
+                                                // float m_APIDStrength         // From SL experiments, this is the time to get there
+                                                // float m_APIDDamping          // From SL experiments, this is damping, 1.0 = damped, 0.1 = wobbly
+                                                                                                        // Also in SL the mass of the object has no effect on time to get there.
+                                                // Factors:
+//if(frcount == 0) Console.WriteLine("APID ");                                                  
+                                    // get present body rotation
+                                    float limit = 1.0f;
+                                    float scaler = 50f;         // adjusts damping time
+                                    float RLAservo = 0f;
+                                    
+                                    d.Quaternion rot = d.BodyGetQuaternion(Body);
+                                    Quaternion rotq = new Quaternion(rot.X, rot.Y, rot.Z, rot.W);
+                                    Quaternion rot_diff = Quaternion.Inverse(rotq) * m_APIDTarget;
+                        float diff_angle;
+                        Vector3 diff_axis;
+                        rot_diff.GetAxisAngle(out diff_axis, out diff_angle);
+                        diff_axis.Normalize();
+                                                if(diff_angle > 0.01f)                  // diff_angle is always +ve
+                                                {
+//                              PhysicsVector rotforce = new PhysicsVector(diff_axis.X, diff_axis.Y, diff_axis.Z);
+                                Vector3 rotforce = new Vector3(diff_axis.X, diff_axis.Y, diff_axis.Z);
+                            rotforce = rotforce * rotq;
+                            if(diff_angle > limit) diff_angle = limit;          // cap the rotate rate
+//                          RLAservo = timestep / m_APIDStrength * m_mass * scaler;
+  //                        rotforce = rotforce * RLAservo * diff_angle ;
+    //                      d.BodyAddRelTorque(Body, rotforce.X, rotforce.Y, rotforce.Z);
+                            RLAservo = timestep / m_APIDStrength * scaler;
+                            rotforce = rotforce * RLAservo * diff_angle ;
+                                                        d.BodySetAngularVel (Body,  rotforce.X, rotforce.Y, rotforce.Z);
+//Console.WriteLine("axis= " + diff_axis + "    angle= " + diff_angle + "servo= " + RLAservo);                                                  
+                                                }
+//if(frcount == 0) Console.WriteLine("mass= " + m_mass + "  servo= " + RLAservo + "   angle= " + diff_angle);                                                   
+                        } // end m_useAPID
+                        
+                    fx *= m_mass;
+                    fy *= m_mass;
+                    //fz *= m_mass;
+
+                    fx += m_force.X;
+                    fy += m_force.Y;
+                    fz += m_force.Z;
+
+                    //m_log.Info("[OBJPID]: X:" + fx.ToString() + " Y:" + fy.ToString() + " Z:" + fz.ToString());
+                    if (fx != 0 || fy != 0 || fz != 0)
+                    {
+                        //m_taintdisable = true;
+                        //base.RaiseOutOfBounds(Position);
+                        //d.BodySetLinearVel(Body, fx, fy, 0f);
+                        if (!d.BodyIsEnabled(Body))
+                        {
+                                // A physical body at rest on a surface will auto-disable after a while,
+                                // this appears to re-enable it incase the surface it is upon vanishes,
+                                // and the body should fall again. 
+                            d.BodySetLinearVel(Body, 0f, 0f, 0f);
+                            d.BodySetForce(Body, 0, 0, 0);
+                            enableBodySoft();
+                        }
+
+                        // 35x10 = 350n times the mass per second applied maximum.
+                        float nmax = 35f * m_mass;
+                        float nmin = -35f * m_mass;
+
+                    
+                        if (fx > nmax)
+                            fx = nmax;
+                        if (fx < nmin)
+                            fx = nmin;
+                        if (fy > nmax)
+                            fy = nmax;
+                        if (fy < nmin)
+                            fy = nmin;
+                        d.BodyAddForce(Body, fx, fy, fz);
+//Console.WriteLine("AddForce " + fx + "," + fy + "," + fz);                            
+                    }
+                                }               
+            }
+            else
+            {   // is not physical, or is not a body or is selected
+              //  _zeroPosition = d.BodyGetPosition(Body);
+                return;
+//Console.WriteLine("Nothing " +  m_primName);                  
+               
+            }
+        }
+
+
+
+        public void rotate(float timestep)
+        {
+            d.Quaternion myrot = new d.Quaternion();
+            myrot.X = _orientation.X;
+            myrot.Y = _orientation.Y;
+            myrot.Z = _orientation.Z;
+            myrot.W = _orientation.W;
+            if (Body != IntPtr.Zero)
+            {
+                    // KF: If this is a root prim do BodySet
+                d.BodySetQuaternion(Body, ref myrot);
+                    if (m_isphysical)
+                    {
+                    if (!m_angularlock.ApproxEquals(Vector3.One, 0f))
+                            createAMotor(m_angularlock);
+                    }
+                }
+                else
+                {
+                        // daughter prim, do Geom set
+                    d.GeomSetQuaternion(prim_geom, ref myrot);
+            }
+            
+            resetCollisionAccounting();
+            m_taintrot = _orientation;
+        }
+
+        private void resetCollisionAccounting()
+        {
+            m_collisionscore = 0;
+            m_interpenetrationcount = 0;
+            m_disabled = false;
+        }
+
+        public void changedisable(float timestep)
+        {
+            m_disabled = true;
+            if (Body != IntPtr.Zero)
+            {
+                d.BodyDisable(Body);
+                Body = IntPtr.Zero;
+            }
+
+            m_taintdisable = false;
+        }
+
+        public void changePhysicsStatus(float timestep)
+        {
+            if (m_isphysical == true)
+            {
+                if (Body == IntPtr.Zero)
+                {
+                    if (_pbs.SculptEntry && _parent_scene.meshSculptedPrim)
+                    {
+                        changeshape(2f);
+                    }
+                    else
+                    {
+                        enableBody();
+                    }
+                }
+            }
+            else
+            {
+                if (Body != IntPtr.Zero)
+                {
+                    if (_pbs.SculptEntry && _parent_scene.meshSculptedPrim)
+                    {
+                        
+
+                        if (prim_geom != IntPtr.Zero)
+                        {
+                            try
+                            {
+                                d.GeomDestroy(prim_geom);
+                                prim_geom = IntPtr.Zero;
+                                _mesh = null;
+                            }
+                            catch (System.AccessViolationException)
+                            {
+                                prim_geom = IntPtr.Zero;
+                                m_log.Error("[PHYSICS]: PrimGeom dead");
+                            }
+                        }
+//Console.WriteLine("changePhysicsStatus for " + m_primName );
+                        changeadd(2f);
+                    }
+                    if (childPrim)
+                    {
+                        if (_parent != null)
+                        {
+                            OdePrim parent = (OdePrim)_parent;
+                            parent.ChildDelink(this);
+                        }
+                    }
+                    else
+                    {
+                        disableBody();
+                    }
+                }
+            }
+
+            changeSelectedStatus(timestep);
+
+            resetCollisionAccounting();
+            m_taintPhysics = m_isphysical;
+        }
+
+        public void changesize(float timestamp)
+        {
+            
+            string oldname = _parent_scene.geom_name_map[prim_geom];
+
+            if (_size.X <= 0) _size.X = 0.01f;
+            if (_size.Y <= 0) _size.Y = 0.01f;
+            if (_size.Z <= 0) _size.Z = 0.01f;
+
+            // Cleanup of old prim geometry
+            if (_mesh != null)
+            {
+                // Cleanup meshing here
+            }
+            //kill body to rebuild
+            if (IsPhysical && Body != IntPtr.Zero)
+            {
+                if (childPrim)
+                {
+                    if (_parent != null)
+                    {
+                        OdePrim parent = (OdePrim)_parent;
+                        parent.ChildDelink(this);
+                    }
+                }
+                else
+                {
+                    disableBody();
+                }
+            }
+            if (d.SpaceQuery(m_targetSpace, prim_geom))
+            {
+                _parent_scene.waitForSpaceUnlock(m_targetSpace);
+                d.SpaceRemove(m_targetSpace, prim_geom);
+            }
+            d.GeomDestroy(prim_geom);
+            prim_geom = IntPtr.Zero;
+            // we don't need to do space calculation because the client sends a position update also.
+
+            // Construction of new prim
+            if (_parent_scene.needsMeshing(_pbs))
+            {
+                float meshlod = _parent_scene.meshSculptLOD;
+
+                if (IsPhysical)
+                    meshlod = _parent_scene.MeshSculptphysicalLOD;
+                // Don't need to re-enable body..   it's done in SetMesh
+
+                IMesh mesh = null;
+
+                if (_parent_scene.needsMeshing(_pbs))
+                    mesh = _parent_scene.mesher.CreateMesh(oldname, _pbs, _size, meshlod, IsPhysical);
+
+                //IMesh mesh = _parent_scene.mesher.CreateMesh(oldname, _pbs, _size, meshlod, IsPhysical);
+//Console.WriteLine("changesize 1");
+                CreateGeom(m_targetSpace, mesh);
+
+               
+            }
+            else
+            {
+                _mesh = null;
+//Console.WriteLine("changesize 2");    
+                CreateGeom(m_targetSpace, _mesh);
+            }
+
+            d.GeomSetPosition(prim_geom, _position.X, _position.Y, _position.Z);
+            d.Quaternion myrot = new d.Quaternion();
+            myrot.X = _orientation.X;
+            myrot.Y = _orientation.Y;
+            myrot.Z = _orientation.Z;
+            myrot.W = _orientation.W;
+            d.GeomSetQuaternion(prim_geom, ref myrot);
+
+            //d.GeomBoxSetLengths(prim_geom, _size.X, _size.Y, _size.Z);
+            if (IsPhysical && Body == IntPtr.Zero && !childPrim)
+            {
+                // Re creates body on size.
+                // EnableBody also does setMass()
+                enableBody();
+                d.BodyEnable(Body);
+            }
+
+            _parent_scene.geom_name_map[prim_geom] = oldname;
+
+            changeSelectedStatus(timestamp);
+            if (childPrim)
+            {
+                if (_parent is OdePrim)
+                {
+                    OdePrim parent = (OdePrim)_parent;
+                    parent.ChildSetGeom(this);
+                }
+            }
+            resetCollisionAccounting();
+            m_taintsize = _size;
+        }
+
+       
+
+        public void changefloatonwater(float timestep)
+        {
+            m_collidesWater = m_taintCollidesWater;
+
+            if (prim_geom != IntPtr.Zero)
+            {
+                if (m_collidesWater)
+                {
+                    m_collisionFlags |= CollisionCategories.Water;
+                }
+                else
+                {
+                    m_collisionFlags &= ~CollisionCategories.Water;
+                }
+                d.GeomSetCollideBits(prim_geom, (int)m_collisionFlags);
+            }
+        }
+
+        public void changeshape(float timestamp)
+        {
+            string oldname = _parent_scene.geom_name_map[prim_geom];
+
+            // Cleanup of old prim geometry and Bodies
+            if (IsPhysical && Body != IntPtr.Zero)
+            {
+                if (childPrim)
+                {
+                    if (_parent != null)
+                    {
+                        OdePrim parent = (OdePrim)_parent;
+                        parent.ChildDelink(this);
+                    }
+                }
+                else
+                {
+                    disableBody();
+                }
+            }
+            try
+            {
+                d.GeomDestroy(prim_geom);
+            }
+            catch (System.AccessViolationException)
+            {
+                prim_geom = IntPtr.Zero;
+                m_log.Error("[PHYSICS]: PrimGeom dead");
+            }
+            prim_geom = IntPtr.Zero;
+            // we don't need to do space calculation because the client sends a position update also.
+            if (_size.X <= 0) _size.X = 0.01f;
+            if (_size.Y <= 0) _size.Y = 0.01f;
+            if (_size.Z <= 0) _size.Z = 0.01f;
+            // Construction of new prim
+
+            if (_parent_scene.needsMeshing(_pbs))
+            {
+                // Don't need to re-enable body..   it's done in SetMesh
+                float meshlod = _parent_scene.meshSculptLOD;
+
+                if (IsPhysical)
+                    meshlod = _parent_scene.MeshSculptphysicalLOD;
+
+                IMesh mesh = _parent_scene.mesher.CreateMesh(oldname, _pbs, _size, meshlod, IsPhysical);
+                // createmesh returns null when it doesn't mesh.
+                CreateGeom(m_targetSpace, mesh);
+            }
+            else
+            {
+                _mesh = null;
+//Console.WriteLine("changeshape");              
+                CreateGeom(m_targetSpace, null);
+            }
+
+            d.GeomSetPosition(prim_geom, _position.X, _position.Y, _position.Z);
+            d.Quaternion myrot = new d.Quaternion();
+            //myrot.W = _orientation.w;
+            myrot.W = _orientation.W;
+            myrot.X = _orientation.X;
+            myrot.Y = _orientation.Y;
+            myrot.Z = _orientation.Z;
+            d.GeomSetQuaternion(prim_geom, ref myrot);
+
+            //d.GeomBoxSetLengths(prim_geom, _size.X, _size.Y, _size.Z);
+            if (IsPhysical && Body == IntPtr.Zero)
+            {
+                // Re creates body on size.
+                // EnableBody also does setMass()
+                enableBody();
+                if (Body != IntPtr.Zero)
+                {
+                    d.BodyEnable(Body);
+                }
+            }
+            _parent_scene.geom_name_map[prim_geom] = oldname;
+
+            changeSelectedStatus(timestamp);
+            if (childPrim)
+            {
+                if (_parent is OdePrim)
+                {
+                    OdePrim parent = (OdePrim)_parent;
+                    parent.ChildSetGeom(this);
+                }
+            }
+            resetCollisionAccounting();
+            m_taintshape = false;
+        }
+
+        public void changeAddForce(float timestamp)
+        {
+            if (!m_isSelected)
+            {
+                lock (m_forcelist)
+                {
+                    //m_log.Info("[PHYSICS]: dequeing forcelist");
+                    if (IsPhysical)
+                    {
+                        Vector3 iforce = Vector3.Zero;
+                        int i = 0;
+                        try
+                        {
+                            for (i = 0; i < m_forcelist.Count; i++)
+                            {
+
+                                iforce = iforce + (m_forcelist[i] * 100);
+                            }
+                        }
+                        catch (IndexOutOfRangeException)
+                        {
+                            m_forcelist = new List<Vector3>();
+                            m_collisionscore = 0;
+                            m_interpenetrationcount = 0;
+                            m_taintforce = false;
+                            return;
+                        }
+                        catch (ArgumentOutOfRangeException)
+                        {
+                            m_forcelist = new List<Vector3>();
+                            m_collisionscore = 0;
+                            m_interpenetrationcount = 0;
+                            m_taintforce = false;
+                            return;
+                        }
+                        d.BodyEnable(Body);
+                        d.BodyAddForce(Body, iforce.X, iforce.Y, iforce.Z);
+                    }
+                    m_forcelist.Clear();
+                }
+
+                m_collisionscore = 0;
+                m_interpenetrationcount = 0;
+            }
+
+            m_taintforce = false;
+
+        }
+
+
+
+        public void changeSetTorque(float timestamp)
+        {
+            if (!m_isSelected)
+            {
+                if (IsPhysical && Body != IntPtr.Zero)
+                {
+                    d.BodySetTorque(Body, m_taintTorque.X, m_taintTorque.Y, m_taintTorque.Z);
+                }
+            }
+
+            m_taintTorque = Vector3.Zero;
+        }
+
+        public void changeAddAngularForce(float timestamp)
+        {
+            if (!m_isSelected)
+            {
+                lock (m_angularforcelist)
+                {
+                    //m_log.Info("[PHYSICS]: dequeing forcelist");
+                    if (IsPhysical)
+                    {
+                        Vector3 iforce = Vector3.Zero;
+                        for (int i = 0; i < m_angularforcelist.Count; i++)
+                        {
+                            iforce = iforce + (m_angularforcelist[i] * 100);
+                        }
+                        d.BodyEnable(Body);
+                        d.BodyAddTorque(Body, iforce.X, iforce.Y, iforce.Z);
+                        
+                    }
+                    m_angularforcelist.Clear();
+                }
+
+                m_collisionscore = 0;
+                m_interpenetrationcount = 0;
+            }
+
+            m_taintaddangularforce = false;
+        }
+
+        private void changevelocity(float timestep)
+        {
+            if (!m_isSelected)
+            {
+                Thread.Sleep(20);
+                if (IsPhysical)
+                {
+                    if (Body != IntPtr.Zero)
+                    {
+                        d.BodySetLinearVel(Body, m_taintVelocity.X, m_taintVelocity.Y, m_taintVelocity.Z);
+                    }
+                }
+                
+                //resetCollisionAccounting();
+            }
+            m_taintVelocity = Vector3.Zero;
+        }
+
+        public override bool IsPhysical
+        {
+            get { return m_isphysical; }
+            set 
+            { 
+                  m_isphysical = value;
+                  if (!m_isphysical)
+                  {             // Zero the remembered last velocity
+                                m_lastVelocity = Vector3.Zero;
+                            if (m_vehicle.Type != Vehicle.TYPE_NONE) m_vehicle.Halt();
+                  }
+            }
+        }
+
+        public void setPrimForRemoval()
+        {
+            m_taintremove = true;
+        }
+
+        public override bool Flying
+        {
+            // no flying prims for you
+            get { return false; }
+            set { }
+        }
+
+        public override bool IsColliding
+        {
+            get { return iscolliding; }
+            set { iscolliding = value; }
+        }
+
+        public override bool CollidingGround
+        {
+            get { return false; }
+            set { return; }
+        }
+
+        public override bool CollidingObj
+        {
+            get { return false; }
+            set { return; }
+        }
+
+        public override bool ThrottleUpdates
+        {
+            get { return m_throttleUpdates; }
+            set { m_throttleUpdates = value; }
+        }
+
+        public override bool Stopped
+        {
+            get { return _zeroFlag; }
+        }
+
+        public override Vector3 Position
+        {
+            get { return _position; }
+
+            set { _position = value;
+                //m_log.Info("[PHYSICS]: " + _position.ToString());
+            }
+        }
+
+        public override Vector3 Size
+        {
+            get { return _size; }
+            set
+            {
+                if (value.IsFinite())
+                {
+                    _size = value;
+                }
+                else
+                {
+                    m_log.Warn("[PHYSICS]: Got NaN Size on object");
+                }
+            }
+        }
+
+        public override float Mass
+        {
+            get { return CalculateMass(); }
+        }
+
+        public override Vector3 Force
+        {
+            //get { return Vector3.Zero; }
+            get { return m_force; }
+            set
+            {
+                if (value.IsFinite())
+                {
+                    m_force = value;
+                }
+                else
+                {
+                    m_log.Warn("[PHYSICS]: NaN in Force Applied to an Object");
+                }
+            }
+        }
+
+        public override int VehicleType
+        {
+            get { return (int)m_vehicle.Type; }
+            set { m_vehicle.ProcessTypeChange((Vehicle)value); }
+        }
+
+        public override void VehicleFloatParam(int param, float value)
+        {
+            m_vehicle.ProcessFloatVehicleParam((Vehicle) param, value);
+        }
+
+        public override void VehicleVectorParam(int param, Vector3 value)
+        {
+            m_vehicle.ProcessVectorVehicleParam((Vehicle) param, value);
+        }
+
+        public override void VehicleRotationParam(int param, Quaternion rotation)
+        {
+            m_vehicle.ProcessRotationVehicleParam((Vehicle) param, rotation);
+        }
+        
+        public override void VehicleFlagsSet(int flags)
+        {
+                        m_vehicle.ProcessFlagsVehicleSet(flags);
+        }
+        
+        public override void VehicleFlagsRemove(int flags)
+        {
+                        m_vehicle.ProcessFlagsVehicleRemove(flags);
+        }
+        
+        public override void SetVolumeDetect(int param)
+        {
+            lock (_parent_scene.OdeLock)
+            {
+                m_isVolumeDetect = (param!=0);
+            }
+        }
+
+        public override Vector3 CenterOfMass
+        {
+            get { return Vector3.Zero; }
+        }
+
+        public override Vector3 GeometricCenter
+        {
+            get { return Vector3.Zero; }
+        }
+
+        public override PrimitiveBaseShape Shape
+        {
+            set
+            {
+                _pbs = value;
+                m_taintshape = true;
+            }
+        }
+
+        public override Vector3 Velocity
+        {
+            get
+            {
+                // Averate previous velocity with the new one so
+                // client object interpolation works a 'little' better
+                if (_zeroFlag)
+                    return Vector3.Zero;
+
+                Vector3 returnVelocity = Vector3.Zero;
+                returnVelocity.X = (m_lastVelocity.X + _velocity.X)/2;
+                returnVelocity.Y = (m_lastVelocity.Y + _velocity.Y)/2;
+                returnVelocity.Z = (m_lastVelocity.Z + _velocity.Z)/2;
+                return returnVelocity;
+            }
+            set
+            {
+                if (value.IsFinite())
+                {
+                    _velocity = value;
+
+                    m_taintVelocity = value;
+                    _parent_scene.AddPhysicsActorTaint(this);
+                }
+                else
+                {
+                    m_log.Warn("[PHYSICS]: Got NaN Velocity in Object");
+                }
+
+            }
+        }
+
+        public override Vector3 Torque
+        {
+            get
+            {
+                if (!m_isphysical || Body == IntPtr.Zero)
+                    return Vector3.Zero;
+
+                return _torque;
+            }
+
+            set
+            {
+                if (value.IsFinite())
+                {
+                    m_taintTorque = value;
+                    _parent_scene.AddPhysicsActorTaint(this);
+                }
+                else
+                {
+                    m_log.Warn("[PHYSICS]: Got NaN Torque in Object");
+                }
+            }
+        }
+
+        public override float CollisionScore
+        {
+            get { return m_collisionscore; }
+            set { m_collisionscore = value; }
+        }
+
+        public override bool Kinematic
+        {
+            get { return false; }
+            set { }
+        }
+
+        public override Quaternion Orientation
+        {
+            get { return _orientation; }
+            set
+            {
+                if (QuaternionIsFinite(value))
+                {
+                    _orientation = value;
+                                }
+                else
+                    m_log.Warn("[PHYSICS]: Got NaN quaternion Orientation from Scene in Object");
+
+            }
+        }
+
+        internal static bool QuaternionIsFinite(Quaternion q)
+        {
+            if (Single.IsNaN(q.X) || Single.IsInfinity(q.X))
+                return false;
+            if (Single.IsNaN(q.Y) || Single.IsInfinity(q.Y))
+                return false;
+            if (Single.IsNaN(q.Z) || Single.IsInfinity(q.Z))
+                return false;
+            if (Single.IsNaN(q.W) || Single.IsInfinity(q.W))
+                return false;
+            return true;
+        }
+
+        public override Vector3 Acceleration
+        {
+            get { return _acceleration; }
+        }
+
+
+        public void SetAcceleration(Vector3 accel)
+        {
+            _acceleration = accel;
+        }
+
+        public override void AddForce(Vector3 force, bool pushforce)
+        {
+            if (force.IsFinite())
+            {
+                lock (m_forcelist)
+                    m_forcelist.Add(force);
+
+                m_taintforce = true;
+            }
+            else
+            {
+                m_log.Warn("[PHYSICS]: Got Invalid linear force vector from Scene in Object");
+            }
+            //m_log.Info("[PHYSICS]: Added Force:" + force.ToString() +  " to prim at " + Position.ToString());
+        }
+
+        public override void AddAngularForce(Vector3 force, bool pushforce)
+        {
+            if (force.IsFinite())
+            {
+                m_angularforcelist.Add(force);
+                m_taintaddangularforce = true;
+            }
+            else
+            {
+                m_log.Warn("[PHYSICS]: Got Invalid Angular force vector from Scene in Object");
+            }
+        }
+
+        public override Vector3 RotationalVelocity
+        {
+            get
+            {
+                Vector3 pv = Vector3.Zero;
+                if (_zeroFlag)
+                    return pv;
+                m_lastUpdateSent = false;
+
+                if (m_rotationalVelocity.ApproxEquals(pv, 0.2f))
+                    return pv;
+
+                return m_rotationalVelocity;
+            }
+            set
+            {
+                if (value.IsFinite())
+                {
+                    m_rotationalVelocity = value;
+                }
+                else
+                {
+                    m_log.Warn("[PHYSICS]: Got NaN RotationalVelocity in Object");
+                }
+            }
+        }
+
+        public override void CrossingFailure()
+        {
+            m_crossingfailures++;
+            if (m_crossingfailures > _parent_scene.geomCrossingFailuresBeforeOutofbounds)
+            {
+                base.RaiseOutOfBounds(_position);
+                return;
+            }
+            else if (m_crossingfailures == _parent_scene.geomCrossingFailuresBeforeOutofbounds)
+            {
+                m_log.Warn("[PHYSICS]: Too many crossing failures for: " + m_primName);
+            }
+        }
+
+        public override float Buoyancy
+        {
+            get { return m_buoyancy; }
+            set { m_buoyancy = value; }
+        }
+
+        public override void link(PhysicsActor obj)
+        {
+            m_taintparent = obj;
+        }
+
+        public override void delink()
+        {
+            m_taintparent = null;
+        }
+
+        public override void LockAngularMotion(Vector3 axis)
+        {
+            // reverse the zero/non zero values for ODE.
+            if (axis.IsFinite())
+            {
+                axis.X = (axis.X > 0) ? 1f : 0f;
+                axis.Y = (axis.Y > 0) ? 1f : 0f;
+                axis.Z = (axis.Z > 0) ? 1f : 0f;
+                m_log.DebugFormat("[axislock]: <{0},{1},{2}>", axis.X, axis.Y, axis.Z);
+                m_taintAngularLock = axis;
+            }
+            else
+            {
+                m_log.Warn("[PHYSICS]: Got NaN locking axis from Scene on Object");
+            }
+        }
+
+        public void UpdatePositionAndVelocity()
+        {
+            //  no lock; called from Simulate() -- if you call this from elsewhere, gotta lock or do Monitor.Enter/Exit!
+            if (_parent == null)
+            {
+                Vector3 pv = Vector3.Zero;
+                bool lastZeroFlag = _zeroFlag;
+                if (Body != (IntPtr)0) // FIXME -> or if it is a joint
+                {
+                    d.Vector3 vec = d.BodyGetPosition(Body);
+                    d.Quaternion ori = d.BodyGetQuaternion(Body);
+                    d.Vector3 vel = d.BodyGetLinearVel(Body);
+                    d.Vector3 rotvel = d.BodyGetAngularVel(Body);
+                    d.Vector3 torque = d.BodyGetTorque(Body);
+                    _torque = new Vector3(torque.X, torque.Y, torque.Z);
+                    Vector3 l_position = Vector3.Zero;
+                    Quaternion l_orientation = Quaternion.Identity;
+
+                    //  kluge to keep things in bounds.  ODE lets dead avatars drift away (they should be removed!)
+                    //if (vec.X < 0.0f) { vec.X = 0.0f; if (Body != (IntPtr)0) d.BodySetAngularVel(Body, 0, 0, 0); }
+                    //if (vec.Y < 0.0f) { vec.Y = 0.0f; if (Body != (IntPtr)0) d.BodySetAngularVel(Body, 0, 0, 0); }
+                    //if (vec.X > 255.95f) { vec.X = 255.95f; if (Body != (IntPtr)0) d.BodySetAngularVel(Body, 0, 0, 0); }
+                    //if (vec.Y > 255.95f) { vec.Y = 255.95f; if (Body != (IntPtr)0) d.BodySetAngularVel(Body, 0, 0, 0); }
+
+                    m_lastposition = _position;
+                    m_lastorientation = _orientation;
+                    
+                    l_position.X = vec.X;
+                    l_position.Y = vec.Y;
+                    l_position.Z = vec.Z;
+                    l_orientation.X = ori.X;
+                    l_orientation.Y = ori.Y;
+                    l_orientation.Z = ori.Z;
+                    l_orientation.W = ori.W;
+                    
+//      if(l_position.Y != m_lastposition.Y){
+//              Console.WriteLine("UP&V {0}  {1}", m_primName, l_position);
+//      }
+
+                    if (l_position.X > ((int)_parent_scene.WorldExtents.X - 0.05f) || l_position.X < 0f || l_position.Y > ((int)_parent_scene.WorldExtents.Y - 0.05f) || l_position.Y < 0f)
+                    {
+                        //base.RaiseOutOfBounds(l_position);
+
+                        if (m_crossingfailures < _parent_scene.geomCrossingFailuresBeforeOutofbounds)
+                        {
+                            _position = l_position;
+                            //_parent_scene.remActivePrim(this);
+                            if (_parent == null)
+                                base.RequestPhysicsterseUpdate();
+                            return;
+                        }
+                        else
+                        {
+                            if (_parent == null)
+                                base.RaiseOutOfBounds(l_position);
+                            return;
+                        }
+                    }
+
+                    if (l_position.Z < 0)
+                    {
+                        // This is so prim that get lost underground don't fall forever and suck up
+                        //
+                        // Sim resources and memory.
+                        // Disables the prim's movement physics....
+                        // It's a hack and will generate a console message if it fails.
+
+                        //IsPhysical = false;
+                        if (_parent == null)
+                            base.RaiseOutOfBounds(_position);
+
+                        _acceleration.X = 0;
+                        _acceleration.Y = 0;
+                        _acceleration.Z = 0;
+
+                        _velocity.X = 0;
+                        _velocity.Y = 0;
+                        _velocity.Z = 0;
+                        m_rotationalVelocity.X = 0;
+                        m_rotationalVelocity.Y = 0;
+                        m_rotationalVelocity.Z = 0;
+
+                        if (_parent == null)
+                            base.RequestPhysicsterseUpdate();
+
+                        m_throttleUpdates = false;
+                        throttleCounter = 0;
+                        _zeroFlag = true;
+                        //outofBounds = true;
+                    }
+
+                                        //float Adiff = 1.0f - Math.Abs(Quaternion.Dot(m_lastorientation, l_orientation));
+//Console.WriteLine("Adiff " + m_primName + " = " + Adiff);                                     
+                    if ((Math.Abs(m_lastposition.X - l_position.X) < 0.02)
+                        && (Math.Abs(m_lastposition.Y - l_position.Y) < 0.02)
+                        && (Math.Abs(m_lastposition.Z - l_position.Z) < 0.02)
+//                        && (1.0 - Math.Abs(Quaternion.Dot(m_lastorientation, l_orientation)) < 0.01))
+                        && (1.0 - Math.Abs(Quaternion.Dot(m_lastorientation, l_orientation)) < 0.0001))  // KF 0.01 is far to large
+                    {
+                        _zeroFlag = true;
+//Console.WriteLine("ZFT 2");                        
+                        m_throttleUpdates = false;
+                    }
+                    else
+                    {
+                        //m_log.Debug(Math.Abs(m_lastposition.X - l_position.X).ToString());
+                        _zeroFlag = false;
+                        m_lastUpdateSent = false;
+                        //m_throttleUpdates = false;
+                    }
+
+                    if (_zeroFlag)
+                    {
+                        _velocity.X = 0.0f;
+                        _velocity.Y = 0.0f;
+                        _velocity.Z = 0.0f;
+
+                        _acceleration.X = 0;
+                        _acceleration.Y = 0;
+                        _acceleration.Z = 0;
+
+                        //_orientation.w = 0f;
+                        //_orientation.X = 0f;
+                        //_orientation.Y = 0f;
+                        //_orientation.Z = 0f;
+                        m_rotationalVelocity.X = 0;
+                        m_rotationalVelocity.Y = 0;
+                        m_rotationalVelocity.Z = 0;
+                        if (!m_lastUpdateSent)
+                        {
+                            m_throttleUpdates = false;
+                            throttleCounter = 0;
+                            m_rotationalVelocity = pv;
+
+                            if (_parent == null)
+                            {
+                                base.RequestPhysicsterseUpdate();
+                            }
+
+                            m_lastUpdateSent = true;
+                        }
+                    }
+                    else
+                    {
+                        if (lastZeroFlag != _zeroFlag)
+                        {
+                            if (_parent == null)
+                            {
+                                base.RequestPhysicsterseUpdate();
+                            }
+                        }
+
+                        m_lastVelocity = _velocity;
+
+                        _position = l_position;
+
+                        _velocity.X = vel.X;
+                        _velocity.Y = vel.Y;
+                        _velocity.Z = vel.Z;
+
+                        _acceleration = ((_velocity - m_lastVelocity) / 0.1f);
+                        _acceleration = new Vector3(_velocity.X - m_lastVelocity.X / 0.1f, _velocity.Y - m_lastVelocity.Y / 0.1f, _velocity.Z - m_lastVelocity.Z / 0.1f);
+                        //m_log.Info("[PHYSICS]: V1: " + _velocity + " V2: " + m_lastVelocity + " Acceleration: " + _acceleration.ToString());
+
+                        if (_velocity.ApproxEquals(pv, 0.5f))
+                        {
+                            m_rotationalVelocity = pv;
+                        }
+                        else
+                        {
+                            m_rotationalVelocity = new Vector3(rotvel.X, rotvel.Y, rotvel.Z);
+                        }
+
+                        //m_log.Debug("ODE: " + m_rotationalVelocity.ToString());
+                        _orientation.X = ori.X;
+                        _orientation.Y = ori.Y;
+                        _orientation.Z = ori.Z;
+                        _orientation.W = ori.W;
+                        m_lastUpdateSent = false;
+                        if (!m_throttleUpdates || throttleCounter > _parent_scene.geomUpdatesPerThrottledUpdate)
+                        {
+                            if (_parent == null)
+                            {
+                                base.RequestPhysicsterseUpdate();
+                            }
+                        }
+                        else
+                        {
+                            throttleCounter++;
+                        }
+                    }
+                    m_lastposition = l_position;
+                }
+                else
+                {
+                    // Not a body..   so Make sure the client isn't interpolating
+                    _velocity.X = 0;
+                    _velocity.Y = 0;
+                    _velocity.Z = 0;
+
+                    _acceleration.X = 0;
+                    _acceleration.Y = 0;
+                    _acceleration.Z = 0;
+
+                    m_rotationalVelocity.X = 0;
+                    m_rotationalVelocity.Y = 0;
+                    m_rotationalVelocity.Z = 0;
+                    _zeroFlag = true;
+                }
+            }
+        }
+
+        public override bool FloatOnWater
+        {
+            set {
+                m_taintCollidesWater = value;
+                _parent_scene.AddPhysicsActorTaint(this);
+            }
+        }
+
+        public override void SetMomentum(Vector3 momentum)
+        {
+        }
+
+        public override Vector3 PIDTarget 
+        { 
+            set
+            {
+                if (value.IsFinite())
+                {
+                    m_PIDTarget = value;
+                }
+                else
+                    m_log.Warn("[PHYSICS]: Got NaN PIDTarget from Scene on Object");
+            } 
+        }
+        public override bool PIDActive { set { m_usePID = value; } }
+        public override float PIDTau { set { m_PIDTau = value; } }
+        
+                // For RotLookAt        
+        public  override Quaternion APIDTarget { set { m_APIDTarget = value; } }
+        public  override bool APIDActive { set { m_useAPID = value; } }
+        public  override float APIDStrength { set { m_APIDStrength = value; } }
+        public  override float APIDDamping { set { m_APIDDamping = value; } }
+
+        public override float PIDHoverHeight { set { m_PIDHoverHeight = value; ; } }
+        public override bool PIDHoverActive { set { m_useHoverPID = value; } }
+        public override PIDHoverType PIDHoverType { set { m_PIDHoverType = value; } }
+        public override float PIDHoverTau { set { m_PIDHoverTau = value; } }
+
+        private void createAMotor(Vector3 axis)
+        {
+            if (Body == IntPtr.Zero)
+                return;
+
+            if (Amotor != IntPtr.Zero)
+            {
+                d.JointDestroy(Amotor);
+                Amotor = IntPtr.Zero;
+            }
+
+            float axisnum = 3;
+
+            axisnum = (axisnum - (axis.X + axis.Y + axis.Z));
+
+            // PhysicsVector totalSize = new PhysicsVector(_size.X, _size.Y, _size.Z);
+
+            
+            // Inverse Inertia Matrix, set the X, Y, and/r Z inertia to 0 then invert it again.
+            d.Mass objMass;
+            d.MassSetZero(out objMass);
+            DMassCopy(ref pMass, ref objMass);
+
+            //m_log.DebugFormat("1-{0}, {1}, {2}, {3}, {4}, {5}, {6}, {7}, {8}, ", objMass.I.M00, objMass.I.M01, objMass.I.M02, objMass.I.M10, objMass.I.M11, objMass.I.M12, objMass.I.M20, objMass.I.M21, objMass.I.M22);
+
+            Matrix4 dMassMat = FromDMass(objMass);
+
+            Matrix4 mathmat = Inverse(dMassMat);
+
+            /*
+            //m_log.DebugFormat("2-{0}, {1}, {2}, {3}, {4}, {5}, {6}, {7}, {8}, ", mathmat[0, 0], mathmat[0, 1], mathmat[0, 2], mathmat[1, 0], mathmat[1, 1], mathmat[1, 2], mathmat[2, 0], mathmat[2, 1], mathmat[2, 2]);
+
+            mathmat = Inverse(mathmat);
+
+
+            objMass = FromMatrix4(mathmat, ref objMass);
+            //m_log.DebugFormat("3-{0}, {1}, {2}, {3}, {4}, {5}, {6}, {7}, {8}, ", objMass.I.M00, objMass.I.M01, objMass.I.M02, objMass.I.M10, objMass.I.M11, objMass.I.M12, objMass.I.M20, objMass.I.M21, objMass.I.M22);
+
+            mathmat = Inverse(mathmat);
+            */
+            if (axis.X == 0)
+            {
+                mathmat.M33 = 50.0000001f;
+                //objMass.I.M22 = 0;
+            }
+            if (axis.Y == 0)
+            {
+                mathmat.M22 = 50.0000001f;
+                //objMass.I.M11 = 0;
+            }
+            if (axis.Z == 0)
+            {
+                mathmat.M11 = 50.0000001f;
+                //objMass.I.M00 = 0;
+            }
+            
+            
+
+            mathmat = Inverse(mathmat);
+            objMass = FromMatrix4(mathmat, ref objMass);
+            //m_log.DebugFormat("4-{0}, {1}, {2}, {3}, {4}, {5}, {6}, {7}, {8}, ", objMass.I.M00, objMass.I.M01, objMass.I.M02, objMass.I.M10, objMass.I.M11, objMass.I.M12, objMass.I.M20, objMass.I.M21, objMass.I.M22);
+           
+            //return;
+            if (d.MassCheck(ref objMass))
+            {
+                d.BodySetMass(Body, ref objMass);
+            }
+            else
+            {
+                //m_log.Debug("[PHYSICS]: Mass invalid, ignoring");
+            }
+
+            if (axisnum <= 0)
+                return;
+            // int dAMotorEuler = 1;
+
+            Amotor = d.JointCreateAMotor(_parent_scene.world, IntPtr.Zero);
+            d.JointAttach(Amotor, Body, IntPtr.Zero);
+            d.JointSetAMotorMode(Amotor, 0);
+
+            d.JointSetAMotorNumAxes(Amotor,(int)axisnum);
+            int i = 0;
+
+            if (axis.X == 0)
+            {
+                d.JointSetAMotorAxis(Amotor, i, 0, 1, 0, 0);
+                i++;
+            }
+
+            if (axis.Y == 0)
+            {
+                d.JointSetAMotorAxis(Amotor, i, 0, 0, 1, 0);
+                i++;
+            }
+
+            if (axis.Z == 0)
+            {
+                d.JointSetAMotorAxis(Amotor, i, 0, 0, 0, 1);
+                i++;
+            }
+
+            for (int j = 0; j < (int)axisnum; j++)
+            {
+                //d.JointSetAMotorAngle(Amotor, j, 0);
+            }
+
+            //d.JointSetAMotorAngle(Amotor, 1, 0);
+            //d.JointSetAMotorAngle(Amotor, 2, 0);
+
+            // These lowstops and high stops are effectively (no wiggle room)
+            d.JointSetAMotorParam(Amotor, (int)dParam.LowStop, -0f);
+            d.JointSetAMotorParam(Amotor, (int)dParam.LoStop3, -0f);
+            d.JointSetAMotorParam(Amotor, (int)dParam.LoStop2, -0f);
+            d.JointSetAMotorParam(Amotor, (int)dParam.HiStop, 0f);
+            d.JointSetAMotorParam(Amotor, (int)dParam.HiStop3, 0f);
+            d.JointSetAMotorParam(Amotor, (int)dParam.HiStop2, 0f);
+            //d.JointSetAMotorParam(Amotor, (int) dParam.Vel, 9000f);
+            d.JointSetAMotorParam(Amotor, (int)dParam.FudgeFactor, 0f);
+            d.JointSetAMotorParam(Amotor, (int)dParam.FMax, Mass * 50f);//
+            
+        }
+
+        public Matrix4 FromDMass(d.Mass pMass)
+        {
+            Matrix4 obj;
+            obj.M11 = pMass.I.M00;
+            obj.M12 = pMass.I.M01;
+            obj.M13 = pMass.I.M02;
+            obj.M14 = 0;
+            obj.M21 = pMass.I.M10;
+            obj.M22 = pMass.I.M11;
+            obj.M23 = pMass.I.M12;
+            obj.M24 = 0;
+            obj.M31 = pMass.I.M20;
+            obj.M32 = pMass.I.M21;
+            obj.M33 = pMass.I.M22;
+            obj.M34 = 0;
+            obj.M41 = 0;
+            obj.M42 = 0;
+            obj.M43 = 0;
+            obj.M44 = 1;
+            return obj;
+        }
+
+        public d.Mass FromMatrix4(Matrix4 pMat, ref d.Mass obj)
+        {
+            obj.I.M00 = pMat[0, 0];
+            obj.I.M01 = pMat[0, 1];
+            obj.I.M02 = pMat[0, 2];
+            obj.I.M10 = pMat[1, 0];
+            obj.I.M11 = pMat[1, 1];
+            obj.I.M12 = pMat[1, 2];
+            obj.I.M20 = pMat[2, 0];
+            obj.I.M21 = pMat[2, 1];
+            obj.I.M22 = pMat[2, 2];
+            return obj;
+        }
+
+        public override void SubscribeEvents(int ms)
+        {
+            m_eventsubscription = ms;
+            _parent_scene.addCollisionEventReporting(this);
+        }
+
+        public override void UnSubscribeEvents()
+        {
+            _parent_scene.remCollisionEventReporting(this);
+            m_eventsubscription = 0;
+        }
+
+        public void AddCollisionEvent(uint CollidedWith, ContactPoint contact)
+        {
+            if (CollisionEventsThisFrame == null)
+                CollisionEventsThisFrame = new CollisionEventUpdate();
+            CollisionEventsThisFrame.addCollider(CollidedWith, contact);
+        }
+
+        public void SendCollisions()
+        {
+            if (CollisionEventsThisFrame == null)
+                return;
+
+            base.SendCollisionUpdate(CollisionEventsThisFrame);
+
+            if (CollisionEventsThisFrame.m_objCollisionList.Count == 0)
+                CollisionEventsThisFrame = null;
+            else
+                CollisionEventsThisFrame = new CollisionEventUpdate();
+        }
+
+        public override bool SubscribedEvents()
+        {
+            if (m_eventsubscription > 0)
+                return true;
+            return false;
+        }
+
+        public static Matrix4 Inverse(Matrix4 pMat)
+        {
+            if (determinant3x3(pMat) == 0)
+            {
+                return Matrix4.Identity; // should probably throw an error.  singluar matrix inverse not possible
+            }
+
+
+
+            return (Adjoint(pMat) / determinant3x3(pMat));
+        }
+
+        public static Matrix4 Adjoint(Matrix4 pMat)
+        {
+            Matrix4 adjointMatrix = new Matrix4();
+            for (int i=0; i<4; i++)
+            {
+                for (int j=0; j<4; j++)
+                {
+                    Matrix4SetValue(ref adjointMatrix, i, j, (float)(Math.Pow(-1, i + j) * (determinant3x3(Minor(pMat, i, j)))));
+                }
+            }
+
+            adjointMatrix = Transpose(adjointMatrix);
+            return adjointMatrix;
+        }
+
+        public static Matrix4 Minor(Matrix4 matrix, int iRow, int iCol)
+        {
+            Matrix4 minor = new Matrix4();
+            int m = 0, n = 0;
+            for (int i = 0; i < 4; i++)
+            {
+                if (i == iRow)
+                    continue;
+                n = 0;
+                for (int j = 0; j < 4; j++)
+                {
+                    if (j == iCol)
+                        continue;
+                    Matrix4SetValue(ref minor, m,n, matrix[i, j]);
+                    n++;
+                }
+                m++;
+            }
+            return minor;
+        }
+
+        public static Matrix4 Transpose(Matrix4 pMat)
+        {
+            Matrix4 transposeMatrix = new Matrix4();
+            for (int i = 0; i < 4; i++)
+                for (int j = 0; j < 4; j++)
+                    Matrix4SetValue(ref transposeMatrix, i, j, pMat[j, i]);
+            return transposeMatrix;
+        }
+
+        public static void Matrix4SetValue(ref Matrix4 pMat, int r, int c, float val)
+        {
+            switch (r)
+            {
+                case 0:
+                    switch (c)
+                    {
+                        case 0:
+                            pMat.M11 = val;
+                            break;
+                        case 1:
+                            pMat.M12 = val;
+                            break;
+                        case 2:
+                            pMat.M13 = val;
+                            break;
+                        case 3:
+                            pMat.M14 = val;
+                            break;
+                    }
+
+                    break;
+                case 1:
+                    switch (c)
+                    {
+                        case 0:
+                            pMat.M21 = val;
+                            break;
+                        case 1:
+                            pMat.M22 = val;
+                            break;
+                        case 2:
+                            pMat.M23 = val;
+                            break;
+                        case 3:
+                            pMat.M24 = val;
+                            break;
+                    }
+
+                    break;
+                case 2:
+                    switch (c)
+                    {
+                        case 0:
+                            pMat.M31 = val;
+                            break;
+                        case 1:
+                            pMat.M32 = val;
+                            break;
+                        case 2:
+                            pMat.M33 = val;
+                            break;
+                        case 3:
+                            pMat.M34 = val;
+                            break;
+                    }
+
+                    break;
+                case 3:
+                    switch (c)
+                    {
+                        case 0:
+                            pMat.M41 = val;
+                            break;
+                        case 1:
+                            pMat.M42 = val;
+                            break;
+                        case 2:
+                            pMat.M43 = val;
+                            break;
+                        case 3:
+                            pMat.M44 = val;
+                            break;
+                    }
+
+                    break;
+            }
+        }
+        private static float determinant3x3(Matrix4 pMat)
+        {
+            float det = 0;
+            float diag1 = pMat[0, 0]*pMat[1, 1]*pMat[2, 2];
+            float diag2 = pMat[0, 1]*pMat[2, 1]*pMat[2, 0];
+            float diag3 = pMat[0, 2]*pMat[1, 0]*pMat[2, 1];
+            float diag4 = pMat[2, 0]*pMat[1, 1]*pMat[0, 2];
+            float diag5 = pMat[2, 1]*pMat[1, 2]*pMat[0, 0];
+            float diag6 = pMat[2, 2]*pMat[1, 0]*pMat[0, 1];
+
+            det = diag1 + diag2 + diag3 - (diag4 + diag5 + diag6);
+            return det;
+
+        }
+        
+        private static void DMassCopy(ref d.Mass src, ref d.Mass dst)
+        {
+            dst.c.W = src.c.W;
+            dst.c.X = src.c.X;
+            dst.c.Y = src.c.Y;
+            dst.c.Z = src.c.Z;
+            dst.mass = src.mass;
+            dst.I.M00 = src.I.M00;
+            dst.I.M01 = src.I.M01;
+            dst.I.M02 = src.I.M02;
+            dst.I.M10 = src.I.M10;
+            dst.I.M11 = src.I.M11;
+            dst.I.M12 = src.I.M12;
+            dst.I.M20 = src.I.M20;
+            dst.I.M21 = src.I.M21;
+            dst.I.M22 = src.I.M22;
+        }
+
+        public override void SetMaterial(int pMaterial)
+        {
+            m_material = pMaterial;
+        }
+
+    }
+}